rpms/kernel
9
2
Fork 4
Code Issues Pull Requests Releases Activity
9742e529b8
kernel/kernel.spec

2862 lines
96 KiB
RPMSpec
Raw Normal View History

initial srpm import
2010-07-29 23:46:31 +00:00
# We have to override the new %%install behavior because, well... the kernel is special.
%global __spec_install_pre %{___build_pre}
Summary: The Linux kernel
# For a stable, released kernel, released_kernel should be 1. For rawhide
# and/or a kernel built from an rc or git snapshot, released_kernel should
# be 0.
Linux v5.3
2019-09-16 12:08:37 +00:00
%global released_kernel 1
initial srpm import
2010-07-29 23:46:31 +00:00
Add kernel module signing on x86 Leave enforcing disabled for now, so unsigned modules can still load. This can be switched by adding "enforcemodulesig=1" to the kernel command line.
2012-03-06 21:09:57 +00:00
# Sign modules on x86. Make sure the config files match this setting if more
# architectures are added.
%ifarch %{ix86} x86_64
Linux v4.5-rc7-116-ge2857b8
2016-03-08 16:37:50 +00:00
%global signkernel 1
Add kernel module signing on x86 Leave enforcing disabled for now, so unsigned modules can still load. This can be switched by adding "enforcemodulesig=1" to the kernel command line.
2012-03-06 21:09:57 +00:00
%global signmodules 1
kernel.spec: xz compress modules on i686 and x86_64 Pretty grody, but it seems to be working... it has to happen after module signing (obviously) and after find-debuginfo.sh runs as well, so tacking it onto the end seems sensible, and then just fixing up the file lists as we go. Provides a nice tidy savings to the disk footprint: kyle@dreadnought:~% for i in kernel-core-3.15.0-0.rc3.git4.1.fc21.x86_64.rpm \ kernel-core-3.15.0-0.rc3.git4.1.fc21.x86_64.rpm.1; do \ rpm -qip $i | grep '^Size'; done Size : 43011603 Size : 81106737 kmod has handed .xz and .gz modules for a long time now, and can cope. I was thinking we might also %ghost the .ko, and have a %post install script that un-xz the modules in /proc/modules, but none of them are big enough for that to be worthwhile I think (maybe XFS, but I doubt it.) --Kyle
2014-05-06 17:02:24 +00:00
%global zipmodules 1
Add kernel module signing on x86 Leave enforcing disabled for now, so unsigned modules can still load. This can be switched by adding "enforcemodulesig=1" to the kernel command line.
2012-03-06 21:09:57 +00:00
%else
Linux v4.5-rc7-116-ge2857b8
2016-03-08 16:37:50 +00:00
%global signkernel 0
%global signmodules 1
Compress modules on all arches, originally infra capability added significant time, this is no longer the case
2017-11-13 13:46:43 +00:00
%global zipmodules 1
kernel.spec: xz compress modules on i686 and x86_64 Pretty grody, but it seems to be working... it has to happen after module signing (obviously) and after find-debuginfo.sh runs as well, so tacking it onto the end seems sensible, and then just fixing up the file lists as we go. Provides a nice tidy savings to the disk footprint: kyle@dreadnought:~% for i in kernel-core-3.15.0-0.rc3.git4.1.fc21.x86_64.rpm \ kernel-core-3.15.0-0.rc3.git4.1.fc21.x86_64.rpm.1; do \ rpm -qip $i | grep '^Size'; done Size : 43011603 Size : 81106737 kmod has handed .xz and .gz modules for a long time now, and can cope. I was thinking we might also %ghost the .ko, and have a %post install script that un-xz the modules in /proc/modules, but none of them are big enough for that to be worthwhile I think (maybe XFS, but I doubt it.) --Kyle
2014-05-06 17:02:24 +00:00
%endif
%if %{zipmodules}
%global zipsed -e 's/\.ko$/\.ko.xz/'
enable parallel xz compression of modules So this uses the -P option for xargs to allow parallel compression of xz uaing xargs options, it allows maximum usage of available CPUs it can be reverted to the prior status quo but running the following sed -i 's/global zcpu `nproc --all`/global zcpu 1/' kernel.spec
2019-06-21 21:02:13 +00:00
# for parallel xz processes, replace with 1 to go back to single process
%global zcpu `nproc --all`
Add kernel module signing on x86 Leave enforcing disabled for now, so unsigned modules can still load. This can be switched by adding "enforcemodulesig=1" to the kernel command line.
2012-03-06 21:09:57 +00:00
%endif
restore the proper, commented out, local build
2018-03-04 23:45:04 +00:00
# define buildid .local
initial srpm import
2010-07-29 23:46:31 +00:00
First crack at adaptation to dist-git.
2010-07-30 01:35:15 +00:00
# baserelease defines which build revision of this kernel version we're
# building. We used to call this fedora_build, but the magical name
# baserelease is matched by the rpmdev-bumpspec tool, which you should use.
initial srpm import
2010-07-29 23:46:31 +00:00
#
First crack at adaptation to dist-git.
2010-07-30 01:35:15 +00:00
# We used to have some extra magic weirdness to bump this automatically,
# but now we don't. Just use: rpmdev-bumpspec -c 'comment for changelog'
# When changing base_sublevel below or going from rc to a final kernel,
# reset this by hand to 1 (or to 0 and then use rpmdev-bumpspec).
# scripts/rebase.sh should be made to do that for you, actually.
#
Add sanity check for baserelease
2011-11-07 13:46:25 +00:00
# NOTE: baserelease must be > 0 or bad things will happen if you switch
# to a released kernel (released version will be < rc version)
Linux 2.6.36-rc1-git1
2010-08-18 23:44:48 +00:00
#
Add sanity check for baserelease
2011-11-07 13:46:25 +00:00
# For non-released -rc kernels, this will be appended after the rcX and
# gitX tags, so a 3 here would become part of release "0.rcX.gitX.3"
#
Linux v5.3-rc2-60-g5c6207539aea Enable 8250 serial ports
2019-08-01 11:46:22 +00:00
%global baserelease 1
First crack at adaptation to dist-git.
2010-07-30 01:35:15 +00:00
%global fedora_build %{baserelease}
initial srpm import
2010-07-29 23:46:31 +00:00
# base_sublevel is the kernel version we're starting with and patching
Linux 3.3-rc7
2012-03-12 16:54:01 +00:00
# on top of -- for example, 3.1-rc7-git1 starts with a 3.0 base,
# which yields a base_sublevel of 0.
Linux v5.3
2019-09-16 12:08:37 +00:00
%define base_sublevel 3
initial srpm import
2010-07-29 23:46:31 +00:00
## If this is a released kernel ##
%if 0%{?released_kernel}
# Do we have a -stable update to apply?
Linux v3.19-rc2 - Temporarily disable aarch64patches - Happy New Year
2015-01-05 21:09:49 +00:00
%define stable_update 0
initial srpm import
2010-07-29 23:46:31 +00:00
# Set rpm version accordingly
%if 0%{?stable_update}
Linux-3.1-rc1 Adjust Makefile munging for 3.x numbering scheme
2011-08-08 14:17:46 +00:00
%define stablerev %{stable_update}
initial srpm import
2010-07-29 23:46:31 +00:00
%define stable_base %{stable_update}
%endif
Linux v5.0.0
2019-03-04 15:13:09 +00:00
%define rpmversion 5.%{base_sublevel}.%{stable_update}
initial srpm import
2010-07-29 23:46:31 +00:00
## The not-released-kernel case ##
%else
# The next upstream release sublevel (base_sublevel+1)
Linux v5.0.0
2019-03-04 15:13:09 +00:00
%define upstream_sublevel %(echo $((%{base_sublevel} + 1)))
initial srpm import
2010-07-29 23:46:31 +00:00
# The rc snapshot level
Linux v5.3
2019-09-16 12:08:37 +00:00
%global rcrev 1
initial srpm import
2010-07-29 23:46:31 +00:00
# The git snapshot level
Linux v5.3-rc8
2019-09-10 08:33:40 +00:00
%define gitrev 0
initial srpm import
2010-07-29 23:46:31 +00:00
# Set rpm version accordingly
Bump for 5.0
2019-01-07 14:55:50 +00:00
%define rpmversion 5.%{upstream_sublevel}.0
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
# Nb: The above rcrev and gitrev values automagically define Patch00 and Patch01 below.
# What parts do we want to build? We must build at least one kernel.
# These are the kernels that are built IF the architecture allows it.
# All should default to 1 (enabled) and be flipped to 0 (disabled)
# by later arch-specific checks.
# The following build options are enabled by default.
# Use either --without <opt> in your rpmbuild command or force values
# to 0 in here to disable them.
#
# standard kernel
%define with_up %{?_without_up: 0} %{?!_without_up: 1}
Clean up old PAE code We no longer support i686 PAE. Cleanup some of the cruft that was left behind and de-obfuscate some macros to make it more obvious what's happening.
2019-04-24 22:17:55 +00:00
# kernel PAE (only valid for ARM (lpae))
Add missing --with/--without pae build flag support Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-01-07 21:54:23 +00:00
%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
initial srpm import
2010-07-29 23:46:31 +00:00
# kernel-debug
%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
# kernel-headers
%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
Add kernel-cross-headers subpackage The kernel-headers package it primarily used in Fedora to build the toolchain components. This works fine for native builds, but we do not have cross-architecture headers available. That means that the cross compiler toolchains we have can only be built without headers and therefore are only useful for building the kernel. Given that Fedora does not allow cross-compiling of it's packages, that hasn't been a problem to date. However, the toolchains might be used by application developers to build their own software. Providing the ability to build cross toolchains that offer glibc as well may benefit these users. This provides a kernel-cross-headers package that will at least allow this possibility.
2016-02-11 14:57:55 +00:00
%define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1}
initial srpm import
2010-07-29 23:46:31 +00:00
# kernel-debuginfo
re-enable debuginfo generation, which had been accidentally disabled in 3d121413
2011-06-22 16:17:08 +00:00
%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
initial srpm import
2010-07-29 23:46:31 +00:00
# Want to build a the vsdo directories installed
%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
Make rpmbuild option "without_debug" work properly on rawhide.
2011-10-23 04:17:53 +00:00
#
initial srpm import
2010-07-29 23:46:31 +00:00
# Additional options for user-friendly one-off kernel building:
#
# Only build the base kernel (--with baseonly):
%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
Add missing --with/--without pae build flag support Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-01-07 21:54:23 +00:00
# Only build the pae kernel (--with paeonly):
%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
initial srpm import
2010-07-29 23:46:31 +00:00
# Only build the debug kernel (--with dbgonly):
%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
Make rpmbuild option "without_debug" work properly on rawhide.
2011-10-23 04:17:53 +00:00
#
initial srpm import
2010-07-29 23:46:31 +00:00
# should we do C=1 builds with sparse
whitespace cleanup
2010-10-26 17:51:00 +00:00
%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
Add build option "--with=release" to build a non-debug kernel in rawhide.
2011-10-27 15:47:50 +00:00
#
Introduce infrastructure for cross-compiling Fedora kernels Intended to assist building for secondary architectures like ppc64, s390x, and arm. To use, create an .src.rpm using "fedpkg srpm" and then run "rpmbuild --rebuild --with cross --without perf --without tools \ kernel*.src.rpm" to cross compile. This requires binutils and gcc packages named like %_target_cpu, which all but powerpc64 currently provides in rawhide/F-19. Can't (currently) cross compile perf or kernel-tools, since libc is missing from the cross environment.
2013-06-13 21:24:01 +00:00
# Cross compile requested?
%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0}
#
Add build option "--with=release" to build a non-debug kernel in rawhide.
2011-10-27 15:47:50 +00:00
# build a release kernel on rawhide
%define with_release %{?_with_release: 1} %{?!_with_release: 0}
initial srpm import
2010-07-29 23:46:31 +00:00
Add verbose option There may be cases when it's useful to see the full kernel build output. Add an option to allow rebuilding with full logs. From Jaroslav Škarvada
2018-01-17 16:32:46 +00:00
# verbose build, i.e. no silent rules and V=1
%define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0}
initial srpm import
2010-07-29 23:46:31 +00:00
# Set debugbuildsenabled to 1 for production (build separate debug kernels)
# and 0 for rawhide (all kernels are debug kernels).
# See also 'make debug' and 'make release'.
Disable debugging options.
2019-09-10 08:24:37 +00:00
%define debugbuildsenabled 1
initial srpm import
2010-07-29 23:46:31 +00:00
Linux v4.18-rc6-152-gcd3f77d74ac3 Disable headers in preparation for kernel headers split
2018-07-27 17:45:27 +00:00
# Kernel headers are being split out into a separate package
Correct Fedora macro
2018-11-14 18:07:04 +00:00
%if 0%{?fedora}
Linux v4.18-rc6-152-gcd3f77d74ac3 Disable headers in preparation for kernel headers split
2018-07-27 17:45:27 +00:00
%define with_headers 0
%define with_cross_headers 0
Disable kernel-headers only in Fedora For ease of building on other targets that still build the headers in the same spec file, add a guard around the kernel headers [labbott: Add more commit text]
2018-10-11 18:41:39 +00:00
%endif
Linux v4.18-rc6-152-gcd3f77d74ac3 Disable headers in preparation for kernel headers split
2018-07-27 17:45:27 +00:00
Add verbose option There may be cases when it's useful to see the full kernel build output. Add an option to allow rebuilding with full logs. From Jaroslav Škarvada
2018-01-17 16:32:46 +00:00
%if %{with_verbose}
%define make_opts V=1
%else
%define make_opts -s
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
# Want to build a vanilla kernel build without any non-upstream patches?
%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
# pkg_release is what we'll fill in for the rpm Release: field
%if 0%{?released_kernel}
Use the same naming scheme as rawhide for -stable RC kernels (e.g. 3.1.1-0.rc1.1 instead of 3.1.1-1.rc1)
2011-11-12 00:51:31 +00:00
%define pkg_release %{fedora_build}%{?buildid}%{?dist}
initial srpm import
2010-07-29 23:46:31 +00:00
%else
# non-released_kernel
%if 0%{?rcrev}
%define rctag .rc%rcrev
%else
%define rctag .rc0
%endif
%if 0%{?gitrev}
%define gittag .git%gitrev
%else
%define gittag .git0
%endif
move %fedora_build in the non-released case
2010-11-18 18:52:09 +00:00
%define pkg_release 0%{?rctag}%{?gittag}.%{fedora_build}%{?buildid}%{?dist}
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
# The kernel tarball/base version
Linux v5.0.0
2019-03-04 15:13:09 +00:00
%define kversion 5.%{base_sublevel}
initial srpm import
2010-07-29 23:46:31 +00:00
%define make_target bzImage
Cleanup image_install_path definitions All arches define this to /boot, so just use one definition. Also remove redundant mkdir for the debuginfo /boot path. Issues reported by Jarod Wilson
2015-05-12 13:55:29 +00:00
%define image_install_path boot
initial srpm import
2010-07-29 23:46:31 +00:00
%define KVERREL %{version}-%{release}.%{_target_cpu}
%define hdrarch %_target_cpu
%define asmarch %_target_cpu
%if 0%{!?nopatches:1}
%define nopatches 0
%endif
%if %{with_vanilla}
%define nopatches 1
%endif
%if %{nopatches}
%define variant -vanilla
%endif
%if !%{debugbuildsenabled}
%define with_debug 0
%endif
%if !%{with_debuginfo}
%define _enable_debug_packages 0
%endif
%define debuginfodir /usr/lib/debug
Linux v4.11-rc3 Fix for debuginfo conflicts (rhbz 1431296)
2017-03-20 15:16:10 +00:00
# Needed because we override almost everything involving build-ids
# and debuginfo generation. Currently we rely on the old alldebug setting.
%global _build_id_links alldebug
initial srpm import
2010-07-29 23:46:31 +00:00
Clean up old PAE code We no longer support i686 PAE. Cleanup some of the cruft that was left behind and de-obfuscate some macros to make it more obvious what's happening.
2019-04-24 22:17:55 +00:00
# kernel PAE is only built on ARMv7
Linux v4.13-11197-gf007cad159e9
2017-09-11 18:05:08 +00:00
%ifnarch armv7hl
initial srpm import
2010-07-29 23:46:31 +00:00
%define with_pae 0
%endif
# if requested, only build base kernel
%if %{with_baseonly}
Add missing --with/--without pae build flag support Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-01-07 21:54:23 +00:00
%define with_pae 0
%define with_debug 0
%endif
# if requested, only build pae kernel
%if %{with_paeonly}
%define with_up 0
initial srpm import
2010-07-29 23:46:31 +00:00
%define with_debug 0
%endif
# if requested, only build debug kernel
%if %{with_dbgonly}
%if %{debugbuildsenabled}
%define with_up 0
Add missing --with/--without pae build flag support Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-01-07 21:54:23 +00:00
%define with_pae 0
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
%define with_pae 0
%endif
%define all_x86 i386 i686
%if %{with_vdso_install}
Enable the vDSO for arm LPAE The vDSO can be used on arm as well. The only supported platforms have LPAE enabled so only enable it there.
2017-05-31 17:42:28 +00:00
%define use_vdso 1
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
# Overrides for generic default options
# don't do debug builds on anything but i686 and x86_64
%ifnarch i686 x86_64
%define with_debug 0
%endif
# don't build noarch kernels or headers (duh)
%ifarch noarch
%define with_up 0
%define with_headers 0
Add kernel-cross-headers subpackage The kernel-headers package it primarily used in Fedora to build the toolchain components. This works fine for native builds, but we do not have cross-architecture headers available. That means that the cross compiler toolchains we have can only be built without headers and therefore are only useful for building the kernel. Given that Fedora does not allow cross-compiling of it's packages, that hasn't been a problem to date. However, the toolchains might be used by application developers to build their own software. Providing the ability to build cross toolchains that offer glibc as well may benefit these users. This provides a kernel-cross-headers package that will at least allow this possibility.
2016-02-11 14:57:55 +00:00
%define with_cross_headers 0
initial srpm import
2010-07-29 23:46:31 +00:00
%define all_arch_configs kernel-%{version}-*.config
%endif
Build tools on ppc64le (rhbz 1138884), Some minor ppc64 cleanups
2014-09-08 18:31:10 +00:00
# sparse blows up on ppc
Remove references to old powerpc We only support one powerpc target. Drop references via the older macro to make the code easier to read.
2019-04-24 22:04:53 +00:00
%ifnarch ppc64le
initial srpm import
2010-07-29 23:46:31 +00:00
%define with_sparse 0
%endif
# Per-arch tweaks
%ifarch %{all_x86}
%define asmarch x86
%define hdrarch i386
%define all_arch_configs kernel-%{version}-i?86*.config
%define kernel_image arch/x86/boot/bzImage
%endif
%ifarch x86_64
%define asmarch x86
%define all_arch_configs kernel-%{version}-x86_64*.config
%define kernel_image arch/x86/boot/bzImage
%endif
Remove references to old powerpc We only support one powerpc target. Drop references via the older macro to make the code easier to read.
2019-04-24 22:04:53 +00:00
%ifarch ppc64le
initial srpm import
2010-07-29 23:46:31 +00:00
%define asmarch powerpc
%define hdrarch powerpc
%define make_target vmlinux
%define kernel_image vmlinux
%define kernel_image_elf 1
Add ppc64le support from Brent Baude (rhbz 1073102)
2014-03-06 19:35:35 +00:00
%ifarch ppc64le
Reorganisation and cleanup of the powerpc configs
2015-06-26 21:23:54 +00:00
%define all_arch_configs kernel-%{version}-ppc64le*.config
Build tools on ppc64le (rhbz 1138884), Some minor ppc64 cleanups
2014-09-08 18:31:10 +00:00
%endif
Add ppc64le support from Brent Baude (rhbz 1073102)
2014-03-06 19:35:35 +00:00
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
%ifarch s390x
%define asmarch s390
%define hdrarch s390
%define all_arch_configs kernel-%{version}-s390x.config
kernel.spec: build and package bzImage on s390 For s390, build and package the compressed kernel image. Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
2018-04-23 09:51:14 +00:00
%define kernel_image arch/s390/boot/bzImage
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
%ifarch %{arm}
%define all_arch_configs kernel-%{version}-arm*.config
Enable the vDSO for arm LPAE The vDSO can be used on arm as well. The only supported platforms have LPAE enabled so only enable it there.
2017-05-31 17:42:28 +00:00
%define skip_nonpae_vdso 1
From: David Marlin <dmarlin@redhat.com> Modify to split the ARM config files to work more like other archs. Rename: config-arm -> config-arm-generic Add: config-arm-omap-generic
2011-08-16 14:31:26 +00:00
%define asmarch arm
initial srpm import
2010-07-29 23:46:31 +00:00
%define hdrarch arm
setup config for tegra based arm boards, add device tree patches for arm build tegra and omap kernel on arm
2011-08-16 16:33:15 +00:00
%define make_target bzImage
%define kernel_image arch/arm/boot/zImage
Shift some %ifarch arm stuff around Define kernel_mflags so we can use the same BuildTarget command for both arm and everyone else. Move the dtb install after modules.
2013-06-12 18:57:55 +00:00
# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
%define kernel_mflags KALLSYMS_EXTRA_PASS=1
Build perf/tools on ARM sfp/hfp not just sfp
2012-01-26 11:00:37 +00:00
# we only build headers/perf/tools on the base arm arches
only build kernel headers on the base arm arches
2011-08-10 19:50:02 +00:00
# just like we used to only build them on i386 for x86
- Make tegra inherit armv7-generic, fix and re-enable tegra - Enable SPI on ARM - Drop config-arm-generic - ARM config updates
2013-03-31 23:45:08 +00:00
%ifnarch armv7hl
only build kernel headers on the base arm arches
2011-08-10 19:50:02 +00:00
%define with_headers 0
Add kernel-cross-headers subpackage The kernel-headers package it primarily used in Fedora to build the toolchain components. This works fine for native builds, but we do not have cross-architecture headers available. That means that the cross compiler toolchains we have can only be built without headers and therefore are only useful for building the kernel. Given that Fedora does not allow cross-compiling of it's packages, that hasn't been a problem to date. However, the toolchains might be used by application developers to build their own software. Providing the ability to build cross toolchains that offer glibc as well may benefit these users. This provides a kernel-cross-headers package that will at least allow this possibility.
2016-02-11 14:57:55 +00:00
%define with_cross_headers 0
only build kernel headers on the base arm arches
2011-08-10 19:50:02 +00:00
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
Add initial arm64 support Based on a working config by Paul Whalen. The generated config ends up being the same, so hopefully this marks the first ARMv8 Fedora kernel. Signed-off-by: Kyle McMartin <kyle@redhat.com>
2013-06-16 12:31:18 +00:00
%ifarch aarch64
aarch64: i lied, fix it better
2014-02-04 15:21:13 +00:00
%define all_arch_configs kernel-%{version}-aarch64*.config
Add initial arm64 support Based on a working config by Paul Whalen. The generated config ends up being the same, so hopefully this marks the first ARMv8 Fedora kernel. Signed-off-by: Kyle McMartin <kyle@redhat.com>
2013-06-16 12:31:18 +00:00
%define asmarch arm64
%define hdrarch arm64
%define make_target Image.gz
%define kernel_image arch/arm64/boot/Image.gz
%endif
On rebases, list new config options. (Revert to pre-18 behaviour)
2012-12-18 20:51:22 +00:00
# Should make listnewconfig fail if there's config options
# printed out?
Drop upstream_branch related spec stuffs We haven't set using_upstream_branch to 1 since we started using git. Almost 7 years is a long time to carry something around we aren't using. Drop the upstream_branch stuff.
2014-01-13 19:50:04 +00:00
%if %{nopatches}
On rebases, list new config options. (Revert to pre-18 behaviour)
2012-12-18 20:51:22 +00:00
%define listnewconfig_fail 0
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
%define configmismatch_fail 0
On rebases, list new config options. (Revert to pre-18 behaviour)
2012-12-18 20:51:22 +00:00
%else
%define listnewconfig_fail 1
Linux v4.14-rc1
2017-09-18 19:14:22 +00:00
%define configmismatch_fail 1
On rebases, list new config options. (Revert to pre-18 behaviour)
2012-12-18 20:51:22 +00:00
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
# To temporarily exclude an architecture from being built, add it to
rpmlint fluff. kernel.src:386: W: macro-in-comment %nobuildarches kernel.src:432: W: macro-in-comment %post kernel.src:1002: W: macro-in-comment %{vanillaversion} kernel.src:1003: W: macro-in-comment %{kversion} kernel.src:1005: W: macro-in-comment %{kversion} kernel.src:1883: W: macro-in-comment %{image_install_path} (Packagers should avoid using macros in comments, but this is a minor error. The easy fix here is to %% comment out any macros in comments, to prevent unexpected and random behavior.)
2010-10-26 17:43:53 +00:00
# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
initial srpm import
2010-07-29 23:46:31 +00:00
# don't build kernel-headers then the new build system will no longer let
# us use the previous build of that package -- it'll just be completely AWOL.
# Which is a BadThing(tm).
# We only build kernel-headers on the following...
Disable CONFIG_JUMP_LABEL on s390x This is causing problems with gcc9. Disable this until we find a real solution.
2019-01-30 15:22:33 +00:00
%define nobuildarches i386
initial srpm import
2010-07-29 23:46:31 +00:00
%ifarch %nobuildarches
%define with_up 0
%define with_pae 0
%define with_debuginfo 0
Ensure we don't build debug as well
2018-06-18 18:34:13 +00:00
%define with_debug 0
initial srpm import
2010-07-29 23:46:31 +00:00
%define _enable_debug_packages 0
%endif
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
# Architectures we build tools/cpupower on
Remove references to old powerpc We only support one powerpc target. Drop references via the older macro to make the code easier to read.
2019-04-24 22:04:53 +00:00
%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
Enable the vDSO for arm LPAE The vDSO can be used on arm as well. The only supported platforms have LPAE enabled so only enable it there.
2017-05-31 17:42:28 +00:00
%if %{use_vdso}
%if 0%{?skip_nonpae_vdso}
%define _use_vdso 0
%else
%define _use_vdso 1
%endif
%else
%define _use_vdso 0
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
#
rpmlint fluff. kernel.src:386: W: macro-in-comment %nobuildarches kernel.src:432: W: macro-in-comment %post kernel.src:1002: W: macro-in-comment %{vanillaversion} kernel.src:1003: W: macro-in-comment %{kversion} kernel.src:1005: W: macro-in-comment %{kversion} kernel.src:1883: W: macro-in-comment %{image_install_path} (Packagers should avoid using macros in comments, but this is a minor error. The easy fix here is to %% comment out any macros in comments, to prevent unexpected and random behavior.)
2010-10-26 17:43:53 +00:00
# Packages that need to be installed before the kernel is, because the %%post
initial srpm import
2010-07-29 23:46:31 +00:00
# scripts use them.
#
Linux v4.6-rc5-69-gf28f20da704d - Require /usr/bin/kernel-install to fix installation after systemd package swizzling (rhbz 1331012) - Reenable debugging options.
2016-04-27 15:29:16 +00:00
%define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install
Add patch from Harald Hoyer to migrate to using kernel-install
2013-05-15 17:08:08 +00:00
%define initrd_prereq dracut >= 027
initial srpm import
2010-07-29 23:46:31 +00:00
Name: kernel%{?variant}
Fix license tag. (rhbz 450492)
2012-09-14 16:04:56 +00:00
License: GPLv2 and Redistributable, no modification permitted
Drop %defattr and Group lines, use https
2018-02-28 13:25:42 +00:00
URL: https://www.kernel.org/
initial srpm import
2010-07-29 23:46:31 +00:00
Version: %{rpmversion}
Linux v3.16-rc4-20-g448bfad8a185 - Reenable debugging options.
2014-07-08 13:52:05 +00:00
Release: %{pkg_release}
initial srpm import
2010-07-29 23:46:31 +00:00
# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
# SET %%nobuildarches (ABOVE) INSTEAD
Turn off i686 builds for Rawhide
2019-07-12 19:43:02 +00:00
ExclusiveArch: x86_64 s390x %{arm} aarch64 ppc64le
initial srpm import
2010-07-29 23:46:31 +00:00
ExclusiveOS: Linux
kernel metapackage shouldn't depend on subpackages we don't build On %{nobuildarches} we don't build the real kernel and modules, so don't set a Requires for them. The positive effect is that we can eliminate an explicit kernel Provides from the fake-build-provides package in secondary kojis.
2014-05-19 14:17:32 +00:00
%ifnarch %{nobuildarches}
Fix kernel-uname-r Requires/Provides variant mismatches There was some discontinuity between the Requires and Provides with respect to variant builds. They have to match, or you wind up with variant builds that can't install w/o forcing them to ignore dependencies. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-18 13:17:15 +00:00
Requires: kernel-core-uname-r = %{KVERREL}%{?variant}
Requires: kernel-modules-uname-r = %{KVERREL}%{?variant}
kernel metapackage shouldn't depend on subpackages we don't build On %{nobuildarches} we don't build the real kernel and modules, so don't set a Requires for them. The positive effect is that we can eliminate an explicit kernel Provides from the fake-build-provides package in secondary kojis.
2014-05-19 14:17:32 +00:00
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
These haven't been shipped in sometime, we can just remove it. This also has the effect of silencing the rpmlint warning about an unversioned obsolete.
2010-10-26 17:46:03 +00:00
initial srpm import
2010-07-29 23:46:31 +00:00
#
# List the packages used during the kernel build
#
build dep on git-core, not git, we only use functionality in the core package for building saves some deps being pulled in
2018-04-26 10:26:58 +00:00
BuildRequires: kmod, patch, bash, tar, git-core
perl dependency renamed to perl-interpreter <https://fedoraproject.org/wiki/Changes/perl_Package_to_Install_Core_Modules>
2017-07-13 07:54:13 +00:00
BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk
We need bison and flex now
2018-02-02 22:09:28 +00:00
BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex
Add support for building with gcc-plugins This doesn't enable any plugins, only the infrastrucutre for enabling plugins at a later date.
2018-10-01 20:36:07 +00:00
BuildRequires: net-tools, hostname, bc, elfutils-devel, gcc-plugin-devel
Only fix shebangs when building for Fedora. If the kernel is being built for .el7, we don't have access to pathfix.py.
2019-01-15 09:44:08 +00:00
%if 0%{?fedora}
Mangle Python shebangs to Python 3 only
2018-09-18 19:56:33 +00:00
# Used to mangle unversioned shebangs to be Python 3
BuildRequires: /usr/bin/pathfix.py
Only fix shebangs when building for Fedora. If the kernel is being built for .el7, we don't have access to pathfix.py.
2019-01-15 09:44:08 +00:00
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
%if %{with_sparse}
update BuildRequires
2013-10-23 15:39:31 +00:00
BuildRequires: sparse
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
BuildConflicts: rhbuildsys(DiskFree) < 500Mb
%if %{with_debuginfo}
update BuildRequires
2013-10-23 15:39:31 +00:00
BuildRequires: rpm-build, elfutils
Update debuginfo generation Once upon a time, the kernel needed a lot of special handling to generate proper debuginfo as the kernel was ahead in technology. These days, rpm has improved debuginfo support. The kernel has not kept up with this and it's forward looking calls are now out of date. Switch to more standard invocations of debuginfo calls.
2017-05-23 17:53:02 +00:00
BuildConflicts: rpm < 4.13.0.1-19
# Most of these should be enabled after more investigation
%undefine _include_minidebuginfo
%undefine _find_debuginfo_dwz_opts
%undefine _unique_build_ids
%undefine _unique_debug_names
%undefine _unique_debug_srcs
Make sure debuginfo options are explicitly turned off
2017-07-26 17:25:48 +00:00
%undefine _debugsource_packages
%undefine _debuginfo_subpackages
Update debuginfo generation Once upon a time, the kernel needed a lot of special handling to generate proper debuginfo as the kernel was ahead in technology. These days, rpm has improved debuginfo support. The kernel has not kept up with this and it's forward looking calls are now out of date. Switch to more standard invocations of debuginfo calls.
2017-05-23 17:53:02 +00:00
%global _find_debuginfo_opts -r
%global _missing_build_ids_terminate_build 1
%global _no_recompute_build_ids 1
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
Linux v4.5-rc7-116-ge2857b8
2016-03-08 16:37:50 +00:00
%if %{signkernel}%{signmodules}
Make sure to BR both openssl and openssl-devel
2015-09-09 16:26:32 +00:00
BuildRequires: openssl openssl-devel
Linux v4.5-rc7-116-ge2857b8
2016-03-08 16:37:50 +00:00
%if %{signkernel}
Bump requirement on pesign to grab the version that works on i686 too
2012-08-16 12:02:59 +00:00
BuildRequires: pesign >= 0.10-4
Add kernel module signing on x86 Leave enforcing disabled for now, so unsigned modules can still load. This can be switched by adding "enforcemodulesig=1" to the kernel command line.
2012-03-06 21:09:57 +00:00
%endif
Linux v4.5-rc7-116-ge2857b8
2016-03-08 16:37:50 +00:00
%endif
Add kernel module signing on x86 Leave enforcing disabled for now, so unsigned modules can still load. This can be switched by adding "enforcemodulesig=1" to the kernel command line.
2012-03-06 21:09:57 +00:00
Introduce infrastructure for cross-compiling Fedora kernels Intended to assist building for secondary architectures like ppc64, s390x, and arm. To use, create an .src.rpm using "fedpkg srpm" and then run "rpmbuild --rebuild --with cross --without perf --without tools \ kernel*.src.rpm" to cross compile. This requires binutils and gcc packages named like %_target_cpu, which all but powerpc64 currently provides in rawhide/F-19. Can't (currently) cross compile perf or kernel-tools, since libc is missing from the cross environment.
2013-06-13 21:24:01 +00:00
%if %{with_cross}
BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
%endif
Linux v5.0.0
2019-03-04 15:13:09 +00:00
Source0: https://www.kernel.org/pub/linux/kernel/v5.x/linux-%{kversion}.tar.xz
initial srpm import
2010-07-29 23:46:31 +00:00
Switch to using modsign-post-KS upstream with x509 certs
2012-09-25 16:02:24 +00:00
Source11: x509.genkey
Add script to remove binary diffs Once upon a time, the kernel was just a series of patches. These days, git manages most of the kernel. git can do many useful things, such as maintain binary files. Binary file changes are not easily expressed in patches and can't be applied without using git. Remove the binary diffs from any snapshot or -rc patches. We will eventually pick up the changes/deletions in the final release tarball.
2016-10-12 20:37:34 +00:00
Source12: remove-binary-diff.pl
initial srpm import
2010-07-29 23:46:31 +00:00
Source15: merge.pl
Create a kernel-modules-extra subpackage This creates a modules-extra subpackage which places a number of less frequently used modules into the extra directory under /lib/modules/`uname -r`/. This reduces the size of the default kernel package while still allowing those modules to be built and installed if needed. We also limit the security exposure by keeping these modules out of the default install.
2011-11-18 13:04:03 +00:00
Source16: mod-extra.list
Move the modules-extra processing to a script
2012-09-14 16:25:07 +00:00
Source17: mod-extra.sh
sign all modules with the extras signing script
2013-01-25 18:53:02 +00:00
Source18: mod-sign.sh
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
Source90: filter-x86_64.sh
Source91: filter-armv7hl.sh
Source92: filter-i686.sh
Source93: filter-aarch64.sh
Drop PPC64 (Big Endian) configs
2018-08-15 20:29:12 +00:00
Source94: filter-ppc64le.sh
Source95: filter-s390x.sh
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
Source99: filter-modules.sh
sign all modules with the extras signing script
2013-01-25 18:53:02 +00:00
%define modsign_cmd %{SOURCE18}
initial srpm import
2010-07-29 23:46:31 +00:00
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
Source20: kernel-aarch64.config
Source21: kernel-aarch64-debug.config
Source22: kernel-armv7hl.config
Source23: kernel-armv7hl-debug.config
Source24: kernel-armv7hl-lpae.config
Source25: kernel-armv7hl-lpae-debug.config
Source26: kernel-i686.config
Source27: kernel-i686-debug.config
Drop PPC64 (Big Endian) configs
2018-08-15 20:29:12 +00:00
Source30: kernel-ppc64le.config
Source31: kernel-ppc64le-debug.config
Source32: kernel-s390x.config
Source33: kernel-s390x-debug.config
Source34: kernel-x86_64.config
Source35: kernel-x86_64-debug.config
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
Source40: generate_all_configs.sh
Source41: generate_debug_configs.sh
initial srpm import
2010-07-29 23:46:31 +00:00
configs: Update scripts and spec file with layout changes With the configs in the new place, update the scripts to find them and utilize the base-generic and generic heirarchy to apply configs and overrides. Implement new process_configs.sh script that post-process the config changes in a simple script and remove those commands from the spec file. Add option flags to preserve functionality. config_generation is a simple rename of baseconfig -> generic and debugconfig -> debug and arm64 -> aarach64. build_configs.sh is modified to find configs in generic and base-generic and then apply base-generic first and if any generic files, apply those next. The generic directory is used as an overrides and is expected to be empty for Fedora initially. kernel.spec is modified to use process_configs.sh instead of all the commands in the spec file. Enabled spec options are translated to script options. The config manipulation is moved to be grouped with all config manipulation commands. This makes 'cd configs/' simpler. Now all config scripts and executiion are done in configs/ directory. v1 -> v2: * the scripts were not working with SUBARCH correctly * checkoptions was using wrong comparison file * passing wrong kernel version to process_configs in spec file v2 -> v3: (incorporate Laura A's feedback) * update README.txt * fix build_configs.sh warnings * Output info message on listnewconfig failure
2017-11-06 22:00:42 +00:00
Source42: process_configs.sh
Generate BootLoaderSpec config fragments The BootLoaderSpec (BLS) defines a scheme where different bootloaders can share a format for boot items and a configuration directory that accepts these common configurations as drop-in files [0]. Generate BLS snippets at build time that can be copied on kernel install, so bootloaders can parse to create menu entries using this information. [0]: https://www.freedesktop.org/wiki/Specifications/BootLoaderSpec/ Signed-off-by: Peter Jones <pjones@redhat.com>
2016-12-15 15:34:30 +00:00
Source43: generate_bls_conf.sh
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
Add support for local rebuild config option overrides Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-01-07 21:40:18 +00:00
# This file is intentionally left empty in the stock kernel. Its a nicety
# added for those wanting to do custom rebuilds with altered config opts.
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
Source1000: kernel-local
Add support for local rebuild config option overrides Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-01-07 21:40:18 +00:00
initial srpm import
2010-07-29 23:46:31 +00:00
# Here should be only the patches up to the upstream canonical Linus tree.
# For a stable release kernel
%if 0%{?stable_update}
%if 0%{?stable_base}
Bump for 5.0
2019-01-07 14:55:50 +00:00
%define stable_patch_00 patch-5.%{base_sublevel}.%{stable_base}.xz
Use git to apply patches
2015-07-09 19:46:07 +00:00
Source5000: %{stable_patch_00}
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
# non-released_kernel case
# These are automagically defined by the rcrev and gitrev values set up
# near the top of this spec file.
%else
%if 0%{?rcrev}
Linux v5.0.0
2019-03-04 15:13:09 +00:00
Source5000: patch-5.%{upstream_sublevel}-rc%{rcrev}.xz
initial srpm import
2010-07-29 23:46:31 +00:00
%if 0%{?gitrev}
Bump for 5.0
2019-01-07 14:55:50 +00:00
Source5001: patch-5.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}.xz
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
%else
# pre-{base_sublevel+1}-rc1 case
%if 0%{?gitrev}
Bump for 5.0
2019-01-07 14:55:50 +00:00
Source5000: patch-5.%{base_sublevel}-git%{gitrev}.xz
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
%endif
%endif
Apply patches with build tweaks (build-AFTER_LINK.patch) and compile fixes all the time [labbott: Rebased to current rawhide tip. Renumbered some patches]
2017-02-28 17:05:22 +00:00
## Patches needed for building this package
## compile fixes
initial srpm import
2010-07-29 23:46:31 +00:00
%if !%{nopatches}
# Git trees.
# Standalone patches
Reorder patch numbers to a rough scheme A little while ago a short lived scheme was tried to maintain kernel patches outside of the Fedora spec in a dedicated kernel source repo. The patch numbers were then auto-gen to add the various patches to the spec. The current numbering in the 400-500 range was a result of that. Now it's not used lets move back to something a little more organised.
2017-05-17 09:45:06 +00:00
# 100 - Generic long running patches
initial srpm import
2010-07-29 23:46:31 +00:00
Reorder patch numbers to a rough scheme A little while ago a short lived scheme was tried to maintain kernel patches outside of the Fedora spec in a dedicated kernel source repo. The patch numbers were then auto-gen to add the various patches to the spec. The current numbering in the 400-500 range was a result of that. Now it's not used lets move back to something a little more organised.
2017-05-17 09:45:06 +00:00
Patch111: input-kill-stupid-messages.patch
fix i.MX6 gpu module loading, fix Jetson TX1 usb
2016-04-28 12:42:42 +00:00
Reorder patch numbers to a rough scheme A little while ago a short lived scheme was tried to maintain kernel patches outside of the Fedora spec in a dedicated kernel source repo. The patch numbers were then auto-gen to add the various patches to the spec. The current numbering in the 400-500 range was a result of that. Now it's not used lets move back to something a little more organised.
2017-05-17 09:45:06 +00:00
Patch112: die-floppy-die.patch
Some OMAP4 fixes, ARM64 fix for NUMA
2016-11-02 14:50:43 +00:00
Reorder patch numbers to a rough scheme A little while ago a short lived scheme was tried to maintain kernel patches outside of the Fedora spec in a dedicated kernel source repo. The patch numbers were then auto-gen to add the various patches to the spec. The current numbering in the 400-500 range was a result of that. Now it's not used lets move back to something a little more organised.
2017-05-17 09:45:06 +00:00
Patch113: no-pcspkr-modalias.patch
Some OMAP4 fixes, ARM64 fix for NUMA
2016-11-02 14:50:43 +00:00
Reorder patch numbers to a rough scheme A little while ago a short lived scheme was tried to maintain kernel patches outside of the Fedora spec in a dedicated kernel source repo. The patch numbers were then auto-gen to add the various patches to the spec. The current numbering in the 400-500 range was a result of that. Now it's not used lets move back to something a little more organised.
2017-05-17 09:45:06 +00:00
Patch115: Kbuild-Add-an-option-to-enable-GCC-VTA.patch
Enable bcm283x VEC composite output
2017-01-18 03:07:36 +00:00
Config updates for upstream kconfig patch 17baab68d337a0bf4654091e2b4cd67c3fdb44d8
2018-05-15 15:39:52 +00:00
Patch116: crash-driver.patch
Reorder patch numbers to a rough scheme A little while ago a short lived scheme was tried to maintain kernel patches outside of the Fedora spec in a dedicated kernel source repo. The patch numbers were then auto-gen to add the various patches to the spec. The current numbering in the 400-500 range was a result of that. Now it's not used lets move back to something a little more organised.
2017-05-17 09:45:06 +00:00
Patch117: lis3-improve-handling-of-null-rate.patch
largish update for ARMv7 and aarch64 - Updates and new SoCs for aarch64 and ARMv7 - Add aarch64 support for PINE64 and Geekbox devices - Fix ethernet naming on Armada 38x devices - Serial console fixes for Tegra
2016-03-06 18:50:49 +00:00
Reorder patch numbers to a rough scheme A little while ago a short lived scheme was tried to maintain kernel patches outside of the Fedora spec in a dedicated kernel source repo. The patch numbers were then auto-gen to add the various patches to the spec. The current numbering in the 400-500 range was a result of that. Now it's not used lets move back to something a little more organised.
2017-05-17 09:45:06 +00:00
Patch118: scsi-sd_revalidate_disk-prevent-NULL-ptr-deref.patch
Fix OOPSes in vc4 (Raspberry Pi)
2017-02-09 19:07:37 +00:00
Reorder patch numbers to a rough scheme A little while ago a short lived scheme was tried to maintain kernel patches outside of the Fedora spec in a dedicated kernel source repo. The patch numbers were then auto-gen to add the various patches to the spec. The current numbering in the 400-500 range was a result of that. Now it's not used lets move back to something a little more organised.
2017-05-17 09:45:06 +00:00
Patch120: ath9k-rx-dma-stop-check.patch
Patch122: Input-synaptics-pin-3-touches-when-the-firmware-repo.patch
Initial DT support for Hummingboard 2 (Edge/Gate)
2017-01-20 08:37:19 +00:00
Linux v4.12-3441-g1996454
2017-07-05 16:00:04 +00:00
# This no longer applies, let's see if it needs to be updated
# Patch123: firmware-Drop-WARN-from-usermodehelper_read_trylock-.patch
Enable sound SoC on aarch64, Update some ARM patches to latest upstream, small cleanups
2017-04-26 10:33:46 +00:00
Reorder patch numbers to a rough scheme A little while ago a short lived scheme was tried to maintain kernel patches outside of the Fedora spec in a dedicated kernel source repo. The patch numbers were then auto-gen to add the various patches to the spec. The current numbering in the 400-500 range was a result of that. Now it's not used lets move back to something a little more organised.
2017-05-17 09:45:06 +00:00
# 200 - x86 / secureboot
initial srpm import
2010-07-29 23:46:31 +00:00
Reorder patch numbers to a rough scheme A little while ago a short lived scheme was tried to maintain kernel patches outside of the Fedora spec in a dedicated kernel source repo. The patch numbers were then auto-gen to add the various patches to the spec. The current numbering in the 400-500 range was a result of that. Now it's not used lets move back to something a little more organised.
2017-05-17 09:45:06 +00:00
Patch201: efi-lockdown.patch
initial srpm import
2010-07-29 23:46:31 +00:00
Update MODSIGN fixes with dhowell's first round of feedback. Related: rhbz#1497559 Signed-off-by: Peter Jones <pjones@redhat.com>
2018-01-09 22:09:19 +00:00
# bz 1497559 - Make kernel MODSIGN code not error on missing variables
Don't print errors just because some EFI variables aren't there. Resolves: rhbz#1497559 Signed-off-by: Peter Jones <pjones@redhat.com>
2017-10-03 18:57:50 +00:00
Patch207: 0001-Make-get_cert_list-not-complain-about-cert-lists-tha.patch
Patch208: 0002-Add-efi_status_to_str-and-rework-efi_status_to_err.patch
Patch209: 0003-Make-get_cert_list-use-efi_status_to_str-to-print-er.patch
Reorder patch numbers to a rough scheme A little while ago a short lived scheme was tried to maintain kernel patches outside of the Fedora spec in a dedicated kernel source repo. The patch numbers were then auto-gen to add the various patches to the spec. The current numbering in the 400-500 range was a result of that. Now it's not used lets move back to something a little more organised.
2017-05-17 09:45:06 +00:00
Patch210: disable-i8042-check-on-apple-mac.patch
Disable soft lockup detector on virtual machines. (rhbz 971139)
2013-06-11 20:36:11 +00:00
Reorder patch numbers to a rough scheme A little while ago a short lived scheme was tried to maintain kernel patches outside of the Fedora spec in a dedicated kernel source repo. The patch numbers were then auto-gen to add the various patches to the spec. The current numbering in the 400-500 range was a result of that. Now it's not used lets move back to something a little more organised.
2017-05-17 09:45:06 +00:00
Patch211: drm-i915-hush-check-crtc-state.patch
Add missing patch for signed modules rebase
2017-05-05 21:20:02 +00:00
Secure Boot updates
2018-06-11 20:35:41 +00:00
Patch212: efi-secureboot.patch
Reorder patch numbers to a rough scheme A little while ago a short lived scheme was tried to maintain kernel patches outside of the Fedora spec in a dedicated kernel source repo. The patch numbers were then auto-gen to add the various patches to the spec. The current numbering in the 400-500 range was a result of that. Now it's not used lets move back to something a little more organised.
2017-05-17 09:45:06 +00:00
# 300 - ARM patches
add patch to fix UDOO boot hang
2018-01-24 16:10:35 +00:00
Patch300: arm64-Add-option-of-13-for-FORCE_MAX_ZONEORDER.patch
Add patch to fix ath9k dma stop checks (rhbz 892811)
2013-02-06 14:57:47 +00:00
minor Arm cleanups
2019-08-25 17:44:48 +00:00
# RHBZ Bug 1576593 - work around while vendor investigates
Patch301: arm-make-highpte-not-expert.patch
minor IrDA cleanup, add fix for Pine64 boot already in 4.14
2017-12-06 04:33:38 +00:00
Add fix from linux-next for mvebu Armada 8K macbin boot regression
2018-05-11 07:02:53 +00:00
# https://patchwork.kernel.org/patch/10351797/
minor Arm cleanups
2019-08-25 17:44:48 +00:00
Patch302: ACPI-scan-Fix-regression-related-to-X-Gene-UARTs.patch
Add fix from linux-next for mvebu Armada 8K macbin boot regression
2018-05-11 07:02:53 +00:00
# rhbz 1574718
minor Arm cleanups
2019-08-25 17:44:48 +00:00
Patch303: ACPI-irq-Workaround-firmware-issue-on-X-Gene-based-m400.patch
minor arm cleanups, update rpi cam patch, add fix for dwc3 on rockchips
2019-06-30 19:15:50 +00:00
minor Arm cleanups
2019-08-25 17:44:48 +00:00
# http://www.spinics.net/lists/linux-tegra/msg26029.html
Patch304: usb-phy-tegra-Add-38.4MHz-clock-table-entry.patch
# http://patchwork.ozlabs.org/patch/587554/
Patch305: ARM-tegra-usb-no-reset.patch
Bug 1576593 - work around while vendor investigates arm builder LPAE HW issue
2019-07-19 17:51:33 +00:00
minor Arm cleanups
2019-08-25 17:44:48 +00:00
# https://patchwork.kernel.org/project/linux-mmc/list/?submitter=71861
Patch306: arm-sdhci-esdhc-imx-fixes.patch
add patch to fix watchdog driver load and reboot on RPi
2019-05-17 18:41:55 +00:00
Fixes for Tegra Jetson TX series, Initial support for NVIDIA Jetson Nano
2019-03-24 17:16:09 +00:00
# Tegra bits
minor Arm cleanups
2019-08-25 17:44:48 +00:00
Patch320: arm64-tegra-jetson-tx1-fixes.patch
fix mac on Jetson-TX2 NIC
2019-08-04 14:31:08 +00:00
# https://www.spinics.net/lists/linux-tegra/msg43110.html
minor Arm cleanups
2019-08-25 17:44:48 +00:00
Patch321: arm64-tegra-Jetson-TX2-Allow-bootloader-to-configure.patch
arm64: qcom: initial improvement of ACPI support for some devices
2019-06-10 09:43:46 +00:00
Add ACPI fixes plus a DT for qcom sd850 based Yoga C630
2019-09-06 08:37:18 +00:00
# QCom laptop bits
# https://patchwork.kernel.org/patch/11133827/
Patch330: arm64-qcom-i2c-geni-Disable-DMA-processing-on-the-Lenovo-Yoga-C630.patch
# https://patchwork.kernel.org/patch/11133293/
Patch332: arm64-dts-qcom-Add-Lenovo-Yoga-C630.patch
Reorder patch numbers to a rough scheme A little while ago a short lived scheme was tried to maintain kernel patches outside of the Fedora spec in a dedicated kernel source repo. The patch numbers were then auto-gen to add the various patches to the spec. The current numbering in the 400-500 range was a result of that. Now it's not used lets move back to something a little more organised.
2017-05-17 09:45:06 +00:00
# 400 - IBM (ppc/s390x) patches
Linux v4.1-5596-gaefbef10e3ae
2015-06-26 13:33:38 +00:00
Reorder patch numbers to a rough scheme A little while ago a short lived scheme was tried to maintain kernel patches outside of the Fedora spec in a dedicated kernel source repo. The patch numbers were then auto-gen to add the various patches to the spec. The current numbering in the 400-500 range was a result of that. Now it's not used lets move back to something a little more organised.
2017-05-17 09:45:06 +00:00
# 500 - Temp fixes/CVEs etc
Linux v4.14-rc1
2017-09-18 19:14:22 +00:00
# rhbz 1431375
efi fix for arm-32 systems
2019-01-10 08:26:34 +00:00
Patch501: input-rmi4-remove-the-need-for-artifical-IRQ.patch
Linux v4.14-rc1
2017-09-18 19:14:22 +00:00
gcc9 fixes
2019-01-23 13:00:25 +00:00
# gcc9 fixes
Actually get building with gcc9 s390 is still failing to build so exclude it for now. Also bring in some fixes to clean up the warnings. (Two that should be accepted upstream, one that needs a closer look)
2019-01-25 07:05:32 +00:00
Patch507: 0001-Drop-that-for-now.patch
gcc9 fixes
2019-01-23 13:00:25 +00:00
Check module signatures with the platform keyring (if enabled) Upstream has made a keyring to the platform keys. The "KEYS: Allow unrestricted boot-time addition of keys to secondary keyring" is available upstream for the platform keyring. The only issue is that module signatures aren't checked with the platform keyring, so this introduces a patch to add that which has been sent upstream. At least our carried-patch count hasn't gone up.
2019-04-23 14:21:09 +00:00
# https://bugzilla.redhat.com/show_bug.cgi?id=1701096
# Submitted upstream at https://lkml.org/lkml/2019/4/23/89
Patch508: KEYS-Make-use-of-platform-keyring-for-module-signature.patch
Add "# END OF PATCH DEFINITIONS" tag (rhbz 811777)
2012-04-17 15:12:10 +00:00
# END OF PATCH DEFINITIONS
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
%description
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
The kernel meta package
#
# This macro does requires, provides, conflicts, obsoletes for a kernel package.
# %%kernel_reqprovconf <subpackage>
# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
# macros defined above.
#
%define kernel_reqprovconf \
Provides: kernel = %{rpmversion}-%{pkg_release}\
Provides: kernel-%{_target_cpu} = %{rpmversion}-%{pkg_release}%{?1:+%{1}}\
Provides: kernel-drm-nouveau = 16\
Fix kernel-uname-r Requires/Provides variant mismatches There was some discontinuity between the Requires and Provides with respect to variant builds. They have to match, or you wind up with variant builds that can't install w/o forcing them to ignore dependencies. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-18 13:17:15 +00:00
Provides: kernel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
Requires(pre): %{kernel_prereq}\
Requires(pre): %{initrd_prereq}\
Bump Requiers on linux-firmware for new amdgpu firmware requirements
2015-09-04 12:43:10 +00:00
Requires(pre): linux-firmware >= 20150904-56.git6ebf5d57\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
Requires(preun): systemd >= 200\
Linux v4.5-rc6-41-ge3c2ef4
2016-03-04 17:32:21 +00:00
Conflicts: xfsprogs < 4.3.0-1\
Fix xorg-x11-drv-vmmouse Conflicts version number
2015-05-18 14:08:10 +00:00
Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
# We can't let RPM do the dependencies automatic because it'll then pick up\
# a correct but undesirable perl dependency from the module headers which\
# isn't required for the kernel proper to function\
Enable autoprov for kernel packages This allows RPM to generate Provides:kmod(foo.ko) statements for every module shipped in the package. That in turn allows packages to put requires on specific modules and not worry about which package they are located in.
2014-05-09 12:33:05 +00:00
AutoReq: no\
AutoProv: yes\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%{nil}
initial srpm import
2010-07-29 23:46:31 +00:00
%package headers
Summary: Header files for the Linux kernel for use by glibc
Fix another rpmlint obsoletes warning kernel.src:757: W: unversioned-explicit-obsoletes glibc-kernheaders kernel-headers.x86_64: W: self-obsoletion glibc-kernheaders obsoletes glibc-kernheaders = 3.0-46
2010-10-26 17:47:32 +00:00
Obsoletes: glibc-kernheaders < 3.0-46
initial srpm import
2010-07-29 23:46:31 +00:00
Provides: glibc-kernheaders = 3.0-46
The if conditional needs quotes here, apparently Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-18 16:03:40 +00:00
%if "0%{?variant}"
Add k-var-headers Obsoletes/Provides When doing a variant build, you want kernel-variant-headers to Obsoletes: and Provides: kernel-headers, so that it can upgrade/replace kernel-headers. Otherwise, attempting to install kernel-variant-headers leads to rpm spewing file conflicts with kernel-headers, if installed. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-18 15:54:24 +00:00
Obsoletes: kernel-headers < %{rpmversion}-%{pkg_release}
Provides: kernel-headers = %{rpmversion}-%{pkg_release}
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
%description headers
Kernel-headers includes the C header files that specify the interface
between the Linux kernel and userspace libraries and programs. The
header files define structures and constants that are needed for
building most standard programs and are also needed for rebuilding the
glibc package.
Add kernel-cross-headers subpackage The kernel-headers package it primarily used in Fedora to build the toolchain components. This works fine for native builds, but we do not have cross-architecture headers available. That means that the cross compiler toolchains we have can only be built without headers and therefore are only useful for building the kernel. Given that Fedora does not allow cross-compiling of it's packages, that hasn't been a problem to date. However, the toolchains might be used by application developers to build their own software. Providing the ability to build cross toolchains that offer glibc as well may benefit these users. This provides a kernel-cross-headers package that will at least allow this possibility.
2016-02-11 14:57:55 +00:00
%package cross-headers
Summary: Header files for the Linux kernel for use by cross-glibc
%description cross-headers
Kernel-cross-headers includes the C header files that specify the interface
between the Linux kernel and userspace libraries and programs. The
header files define structures and constants that are needed for
building most standard programs and are also needed for rebuilding the
cross-glibc package.
initial srpm import
2010-07-29 23:46:31 +00:00
%package debuginfo-common-%{_target_cpu}
Summary: Kernel source files used by %{name}-debuginfo packages
Linux v4.5-rc4
2016-02-15 19:21:40 +00:00
Provides: installonlypkg(kernel)
initial srpm import
2010-07-29 23:46:31 +00:00
%description debuginfo-common-%{_target_cpu}
This package is required by %{name}-debuginfo subpackages.
It provides the kernel source files common to all builds.
#
# This macro creates a kernel-<subpackage>-debuginfo package.
# %%kernel_debuginfo_package <subpackage>
#
%define kernel_debuginfo_package() \
%package %{?1:%{1}-}debuginfo\
Summary: Debug information for package %{name}%{?1:-%{1}}\
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
Linux v4.5-rc4
2016-02-15 19:21:40 +00:00
Provides: installonlypkg(kernel)\
initial srpm import
2010-07-29 23:46:31 +00:00
AutoReqProv: no\
The package and description definitions should always match The %package foo and %description foo bits should always match. If you use -n for one, use it for the other, and vice versa. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-19 14:31:03 +00:00
%description %{?1:%{1}-}debuginfo\
initial srpm import
2010-07-29 23:46:31 +00:00
This package provides debug information for package %{name}%{?1:-%{1}}.\
This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
Update debuginfo generation Once upon a time, the kernel needed a lot of special handling to generate proper debuginfo as the kernel was ahead in technology. These days, rpm has improved debuginfo support. The kernel has not kept up with this and it's forward looking calls are now out of date. Switch to more standard invocations of debuginfo calls.
2017-05-23 17:53:02 +00:00
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '/.*/%%{KVERREL}%{?1:[+]%{1}}/.*|/.*%%{KVERREL}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
initial srpm import
2010-07-29 23:46:31 +00:00
%{nil}
#
# This macro creates a kernel-<subpackage>-devel package.
# %%kernel_devel_package <subpackage> <pretty-name>
#
%define kernel_devel_package() \
%package %{?1:%{1}-}devel\
Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
let flavors/variants end with + in the uname
2013-07-22 20:51:25 +00:00
Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
Fix kernel-uname-r Requires/Provides variant mismatches There was some discontinuity between the Requires and Provides with respect to variant builds. They have to match, or you wind up with variant builds that can't install w/o forcing them to ignore dependencies. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-18 13:17:15 +00:00
Provides: kernel-devel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\
Add installonlypkg(kernel) to kernel-devel subpackages (rhbz 1079906)
2015-01-13 19:36:20 +00:00
Provides: installonlypkg(kernel)\
initial srpm import
2010-07-29 23:46:31 +00:00
AutoReqProv: no\
Change requires to updated package names and correctly Requires findutils in -devel package (rhbz 1319131)
2016-03-18 19:02:57 +00:00
Requires(pre): findutils\
Requires: findutils\
perl dependency renamed to perl-interpreter <https://fedoraproject.org/wiki/Changes/perl_Package_to_Install_Core_Modules>
2017-07-13 07:54:13 +00:00
Requires: perl-interpreter\
The package and description definitions should always match The %package foo and %description foo bits should always match. If you use -n for one, use it for the other, and vice versa. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-19 14:31:03 +00:00
%description %{?1:%{1}-}devel\
initial srpm import
2010-07-29 23:46:31 +00:00
This package provides kernel headers and makefiles sufficient to build modules\
against the %{?2:%{2} }kernel package.\
%{nil}
Create a kernel-modules-extra subpackage This creates a modules-extra subpackage which places a number of less frequently used modules into the extra directory under /lib/modules/`uname -r`/. This reduces the size of the default kernel package while still allowing those modules to be built and installed if needed. We also limit the security exposure by keeping these modules out of the default install.
2011-11-18 13:04:03 +00:00
#
# This macro creates a kernel-<subpackage>-modules-extra package.
Linux v3.11-rc1 - Disable debugging options. - Fix %kernel_modules warning.
2013-07-17 02:56:52 +00:00
# %%kernel_modules_extra_package <subpackage> <pretty-name>
Create a kernel-modules-extra subpackage This creates a modules-extra subpackage which places a number of less frequently used modules into the extra directory under /lib/modules/`uname -r`/. This reduces the size of the default kernel package while still allowing those modules to be built and installed if needed. We also limit the security exposure by keeping these modules out of the default install.
2011-11-18 13:04:03 +00:00
#
Linux v3.11-rc1 - Disable debugging options. - Fix %kernel_modules warning.
2013-07-17 02:56:52 +00:00
%define kernel_modules_extra_package() \
Create a kernel-modules-extra subpackage This creates a modules-extra subpackage which places a number of less frequently used modules into the extra directory under /lib/modules/`uname -r`/. This reduces the size of the default kernel package while still allowing those modules to be built and installed if needed. We also limit the security exposure by keeping these modules out of the default install.
2011-11-18 13:04:03 +00:00
%package %{?1:%{1}-}modules-extra\
Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
Fix k-m-e Provides to be explicit to only the package flavor (rhbz 1046246)
2014-01-14 17:00:46 +00:00
Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\
Add virtual provides for kernel-module to kernel-modules-extra (rhbz 770444)
2012-06-11 20:15:28 +00:00
Provides: installonlypkg(kernel-module)\
Fix kernel-uname-r Requires/Provides variant mismatches There was some discontinuity between the Requires and Provides with respect to variant builds. They have to match, or you wind up with variant builds that can't install w/o forcing them to ignore dependencies. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-18 13:17:15 +00:00
Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\
Requires: kernel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\
Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\
Enable autoprov for kernel packages This allows RPM to generate Provides:kmod(foo.ko) statements for every module shipped in the package. That in turn allows packages to put requires on specific modules and not worry about which package they are located in.
2014-05-09 12:33:05 +00:00
AutoReq: no\
AutoProv: yes\
The package and description definitions should always match The %package foo and %description foo bits should always match. If you use -n for one, use it for the other, and vice versa. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-19 14:31:03 +00:00
%description %{?1:%{1}-}modules-extra\
Create a kernel-modules-extra subpackage This creates a modules-extra subpackage which places a number of less frequently used modules into the extra directory under /lib/modules/`uname -r`/. This reduces the size of the default kernel package while still allowing those modules to be built and installed if needed. We also limit the security exposure by keeping these modules out of the default install.
2011-11-18 13:04:03 +00:00
This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
%{nil}
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
#
Rename kernel-drivers to kernel-modules
2014-05-02 01:10:44 +00:00
# This macro creates a kernel-<subpackage>-modules package.
# %%kernel_modules_package <subpackage> <pretty-name>
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
#
Rename kernel-drivers to kernel-modules
2014-05-02 01:10:44 +00:00
%define kernel_modules_package() \
%package %{?1:%{1}-}modules\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
Summary: kernel modules to match the %{?2:%{2}-}core kernel\
Rename kernel-drivers to kernel-modules
2014-05-02 01:10:44 +00:00
Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\
Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
Provides: installonlypkg(kernel-module)\
Fix kernel-uname-r Requires/Provides variant mismatches There was some discontinuity between the Requires and Provides with respect to variant builds. They have to match, or you wind up with variant builds that can't install w/o forcing them to ignore dependencies. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-18 13:17:15 +00:00
Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\
Requires: kernel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\
Enable autoprov for kernel packages This allows RPM to generate Provides:kmod(foo.ko) statements for every module shipped in the package. That in turn allows packages to put requires on specific modules and not worry about which package they are located in.
2014-05-09 12:33:05 +00:00
AutoReq: no\
AutoProv: yes\
The package and description definitions should always match The %package foo and %description foo bits should always match. If you use -n for one, use it for the other, and vice versa. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-19 14:31:03 +00:00
%description %{?1:%{1}-}modules\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
%{nil}
Add kernel metapackages for all flavors, not just debug
2014-05-01 21:20:09 +00:00
#
# this macro creates a kernel-<subpackage> meta package.
# %%kernel_meta_package <subpackage>
#
%define kernel_meta_package() \
%package %{1}\
summary: kernel meta-package for the %{1} kernel\
Fix kernel-uname-r Requires/Provides variant mismatches There was some discontinuity between the Requires and Provides with respect to variant builds. They have to match, or you wind up with variant builds that can't install w/o forcing them to ignore dependencies. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-18 13:17:15 +00:00
Requires: kernel-%{1}-core-uname-r = %{KVERREL}%{?variant}+%{1}\
Requires: kernel-%{1}-modules-uname-r = %{KVERREL}%{?variant}+%{1}\
Linux v4.5-rc4
2016-02-15 19:21:40 +00:00
Provides: installonlypkg(kernel)\
Add kernel metapackages for all flavors, not just debug
2014-05-01 21:20:09 +00:00
%description %{1}\
The meta-package for the %{1} kernel\
%{nil}
initial srpm import
2010-07-29 23:46:31 +00:00
#
# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
# %%define variant_summary The Linux kernel compiled for <configuration>
# %%kernel_variant_package [-n <pretty-name>] <subpackage>
#
%define kernel_variant_package(n:) \
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%package %{?1:%{1}-}core\
initial srpm import
2010-07-29 23:46:31 +00:00
Summary: %{variant_summary}\
Fix kernel-uname-r Requires/Provides variant mismatches There was some discontinuity between the Requires and Provides with respect to variant builds. They have to match, or you wind up with variant builds that can't install w/o forcing them to ignore dependencies. Signed-off-by: Jarod Wilson <jarod@redhat.com>
2015-03-18 13:17:15 +00:00
Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\
Linux v4.5-rc4
2016-02-15 19:21:40 +00:00
Provides: installonlypkg(kernel)\
Remove references to old powerpc We only support one powerpc target. Drop references via the older macro to make the code easier to read.
2019-04-24 22:04:53 +00:00
%ifarch ppc64le\
Obsolete kernel-bootwrapper for rawhide only
2018-05-14 21:36:41 +00:00
Obsoletes: kernel-bootwrapper\
%endif\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%{expand:%%kernel_reqprovconf}\
Add kernel metapackages for all flavors, not just debug
2014-05-01 21:20:09 +00:00
%if %{?1:1} %{!?1:0} \
%{expand:%%kernel_meta_package %{?1:%{1}}}\
%endif\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
Rename kernel-drivers to kernel-modules
2014-05-02 01:10:44 +00:00
%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
initial srpm import
2010-07-29 23:46:31 +00:00
%{nil}
# Now, each variant package.
Put some %if %{with_pae} in a few places This is mostly to quiet a bunch of rpmlint warnings about unexpanded macros for non-existant packages.
2017-11-13 23:10:31 +00:00
%if %{with_pae}
Merge ARM lpae and i686 PAE flavours
2013-06-12 17:14:31 +00:00
%define variant_summary The Linux kernel compiled for Cortex-A15
Clean up old PAE code We no longer support i686 PAE. Cleanup some of the cruft that was left behind and de-obfuscate some macros to make it more obvious what's happening.
2019-04-24 22:17:55 +00:00
%kernel_variant_package lpae
%description lpae-core
Merge ARM lpae and i686 PAE flavours
2013-06-12 17:14:31 +00:00
This package includes a version of the Linux kernel with support for
Cortex-A15 devices with LPAE and HW virtualisation support
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
%define variant_summary The Linux kernel compiled with extra debugging enabled
%kernel_variant_package debug
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%description debug-core
initial srpm import
2010-07-29 23:46:31 +00:00
The kernel package contains the Linux kernel (vmlinuz), the core of any
Linux operating system. The kernel handles the basic functions
of the operating system: memory allocation, process allocation, device
input and output, etc.
This variant of the kernel has numerous debugging options enabled.
It should only be installed when trying to gather additional information
on kernel bugs, as some of these options impact performance noticably.
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
# And finally the main -core package
%define variant_summary The Linux kernel
There are a few instances if trailing whitespace throughout the spec. It's not uncommon for editors to yell about this (such as vim with syntastic running rpmlint) and the yelling can be annoying so...
2016-08-05 09:17:33 +00:00
%kernel_variant_package
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%description core
The kernel package contains the Linux kernel (vmlinuz), the core of any
Linux operating system. The kernel handles the basic functions
of the operating system: memory allocation, process allocation, device
input and output, etc.
setup config for tegra based arm boards, add device tree patches for arm build tegra and omap kernel on arm
2011-08-16 16:33:15 +00:00
initial srpm import
2010-07-29 23:46:31 +00:00
%prep
# do a few sanity-checks for --with *only builds
%if %{with_baseonly}
%if !%{with_up}%{with_pae}
echo "Cannot build --with baseonly, up build is disabled"
exit 1
%endif
%endif
Fix the baserelease sanity check We need to explicitly check for 0, so that we can do things like setting baserelease to 1.1 for scratch builds, etc.
2011-11-22 15:36:27 +00:00
%if "%{baserelease}" == "0"
Add sanity check for baserelease
2011-11-07 13:46:25 +00:00
echo "baserelease must be greater than zero"
exit 1
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
# more sanity checking; do it quietly
if [ "%{patches}" != "%%{patches}" ] ; then
for patch in %{patches} ; do
if [ ! -f $patch ] ; then
echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
exit 1
fi
done
fi 2>/dev/null
# First we unpack the kernel tarball.
# If this isn't the first make prep, we use links to the existing clean tarball
# which speeds things up quite a bit.
# Update to latest upstream.
%if 0%{?released_kernel}
Bump for 5.0
2019-01-07 14:55:50 +00:00
%define vanillaversion 5.%{base_sublevel}
initial srpm import
2010-07-29 23:46:31 +00:00
# non-released_kernel case
%else
%if 0%{?rcrev}
Bump for 5.0
2019-01-07 14:55:50 +00:00
%define vanillaversion 5.%{upstream_sublevel}-rc%{rcrev}
initial srpm import
2010-07-29 23:46:31 +00:00
%if 0%{?gitrev}
Bump for 5.0
2019-01-07 14:55:50 +00:00
%define vanillaversion 5.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
%else
# pre-{base_sublevel+1}-rc1 case
%if 0%{?gitrev}
Bump for 5.0
2019-01-07 14:55:50 +00:00
%define vanillaversion 5.%{base_sublevel}-git%{gitrev}
initial srpm import
2010-07-29 23:46:31 +00:00
%else
Bump for 5.0
2019-01-07 14:55:50 +00:00
%define vanillaversion 5.%{base_sublevel}
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
%endif
%endif
rpmlint fluff. kernel.src:386: W: macro-in-comment %nobuildarches kernel.src:432: W: macro-in-comment %post kernel.src:1002: W: macro-in-comment %{vanillaversion} kernel.src:1003: W: macro-in-comment %{kversion} kernel.src:1005: W: macro-in-comment %{kversion} kernel.src:1883: W: macro-in-comment %{image_install_path} (Packagers should avoid using macros in comments, but this is a minor error. The easy fix here is to %% comment out any macros in comments, to prevent unexpected and random behavior.)
2010-10-26 17:43:53 +00:00
# %%{vanillaversion} : the full version name, e.g. 2.6.35-rc6-git3
# %%{kversion} : the base version, e.g. 2.6.34
initial srpm import
2010-07-29 23:46:31 +00:00
rpmlint fluff. kernel.src:386: W: macro-in-comment %nobuildarches kernel.src:432: W: macro-in-comment %post kernel.src:1002: W: macro-in-comment %{vanillaversion} kernel.src:1003: W: macro-in-comment %{kversion} kernel.src:1005: W: macro-in-comment %{kversion} kernel.src:1883: W: macro-in-comment %{image_install_path} (Packagers should avoid using macros in comments, but this is a minor error. The easy fix here is to %% comment out any macros in comments, to prevent unexpected and random behavior.)
2010-10-26 17:43:53 +00:00
# Use kernel-%%{kversion}%%{?dist} as the top-level directory name
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
# so we can prep different trees within a single git directory.
initial srpm import
2010-07-29 23:46:31 +00:00
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
# Build a list of the other top-level kernel tree directories.
# This will be used to hardlink identical vanilla subdirs.
Bump for 5.0
2019-01-07 14:55:50 +00:00
sharedirs=$(find "$PWD" -maxdepth 1 -type d -name 'kernel-5.*' \
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
| grep -x -v "$PWD"/kernel-%{kversion}%{?dist}) ||:
initial srpm import
2010-07-29 23:46:31 +00:00
do the old directory cleanup before we unpack the new tree. This removes all the old clutter of previous nvr trees.
2012-03-19 21:52:11 +00:00
# Delete all old stale trees.
if [ -d kernel-%{kversion}%{?dist} ]; then
cd kernel-%{kversion}%{?dist}
for i in linux-*
do
Linux v3.3-4074-g5375871
2012-03-22 16:05:20 +00:00
if [ -d $i ]; then
# Just in case we ctrl-c'd a prep already
rm -rf deleteme.%{_target_cpu}
# Move away the stale away, and delete in background.
mv $i deleteme-$i
rm -rf deleteme* &
fi
do the old directory cleanup before we unpack the new tree. This removes all the old clutter of previous nvr trees.
2012-03-19 21:52:11 +00:00
done
cd ..
fi
# Generate new tree
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
if [ ! -d kernel-%{kversion}%{?dist}/vanilla-%{vanillaversion} ]; then
if [ -d kernel-%{kversion}%{?dist}/vanilla-%{kversion} ]; then
# The base vanilla version already exists.
cd kernel-%{kversion}%{?dist}
initial srpm import
2010-07-29 23:46:31 +00:00
# Any vanilla-* directories other than the base one are stale.
for dir in vanilla-*; do
[ "$dir" = vanilla-%{kversion} ] || rm -rf $dir &
done
else
rm -f pax_global_header
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
# Look for an identical base vanilla dir that can be hardlinked.
initial srpm import
2010-07-29 23:46:31 +00:00
for sharedir in $sharedirs ; do
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
if [[ ! -z $sharedir && -d $sharedir/vanilla-%{kversion} ]] ; then
initial srpm import
2010-07-29 23:46:31 +00:00
break
fi
done
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
if [[ ! -z $sharedir && -d $sharedir/vanilla-%{kversion} ]] ; then
%setup -q -n kernel-%{kversion}%{?dist} -c -T
copy kernel trees around with 'cp -al' so symlinks are preserved. Fixes weird build failures with coreutils 8.22 (rhbz 1044801)
2013-12-19 12:09:22 +00:00
cp -al $sharedir/vanilla-%{kversion} .
initial srpm import
2010-07-29 23:46:31 +00:00
else
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
%setup -q -n kernel-%{kversion}%{?dist} -c
One s/kversion/KVERREL too many Fix prep as the tarball untars to linux-%{kversion}
2012-02-23 00:18:51 +00:00
mv linux-%{kversion} vanilla-%{kversion}
initial srpm import
2010-07-29 23:46:31 +00:00
fi
fi
%if "%{kversion}" != "%{vanillaversion}"
for sharedir in $sharedirs ; do
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
if [[ ! -z $sharedir && -d $sharedir/vanilla-%{vanillaversion} ]] ; then
initial srpm import
2010-07-29 23:46:31 +00:00
break
fi
done
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
if [[ ! -z $sharedir && -d $sharedir/vanilla-%{vanillaversion} ]] ; then
initial srpm import
2010-07-29 23:46:31 +00:00
copy kernel trees around with 'cp -al' so symlinks are preserved. Fixes weird build failures with coreutils 8.22 (rhbz 1044801)
2013-12-19 12:09:22 +00:00
cp -al $sharedir/vanilla-%{vanillaversion} .
initial srpm import
2010-07-29 23:46:31 +00:00
else
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
# Need to apply patches to the base vanilla version.
copy kernel trees around with 'cp -al' so symlinks are preserved. Fixes weird build failures with coreutils 8.22 (rhbz 1044801)
2013-12-19 12:09:22 +00:00
cp -al vanilla-%{kversion} vanilla-%{vanillaversion}
initial srpm import
2010-07-29 23:46:31 +00:00
cd vanilla-%{vanillaversion}
Add script to remove binary diffs Once upon a time, the kernel was just a series of patches. These days, git manages most of the kernel. git can do many useful things, such as maintain binary files. Binary file changes are not easily expressed in patches and can't be applied without using git. Remove the binary diffs from any snapshot or -rc patches. We will eventually pick up the changes/deletions in the final release tarball.
2016-10-12 20:37:34 +00:00
cp %{SOURCE12} .
initial srpm import
2010-07-29 23:46:31 +00:00
# Update vanilla to the latest upstream.
# (non-released_kernel case only)
%if 0%{?rcrev}
Add script to remove binary diffs Once upon a time, the kernel was just a series of patches. These days, git manages most of the kernel. git can do many useful things, such as maintain binary files. Binary file changes are not easily expressed in patches and can't be applied without using git. Remove the binary diffs from any snapshot or -rc patches. We will eventually pick up the changes/deletions in the final release tarball.
2016-10-12 20:37:34 +00:00
xzcat %{SOURCE5000} | ./remove-binary-diff.pl | patch -p1 -F1 -s
initial srpm import
2010-07-29 23:46:31 +00:00
%if 0%{?gitrev}
Add script to remove binary diffs Once upon a time, the kernel was just a series of patches. These days, git manages most of the kernel. git can do many useful things, such as maintain binary files. Binary file changes are not easily expressed in patches and can't be applied without using git. Remove the binary diffs from any snapshot or -rc patches. We will eventually pick up the changes/deletions in the final release tarball.
2016-10-12 20:37:34 +00:00
xzcat %{SOURCE5001} | ./remove-binary-diff.pl | patch -p1 -F1 -s
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
%else
# pre-{base_sublevel+1}-rc1 case
%if 0%{?gitrev}
Add script to remove binary diffs Once upon a time, the kernel was just a series of patches. These days, git manages most of the kernel. git can do many useful things, such as maintain binary files. Binary file changes are not easily expressed in patches and can't be applied without using git. Remove the binary diffs from any snapshot or -rc patches. We will eventually pick up the changes/deletions in the final release tarball.
2016-10-12 20:37:34 +00:00
xzcat %{SOURCE5000} | ./remove-binary-diff.pl | patch -p1 -F1 -s
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
%endif
Use git to apply patches
2015-07-09 19:46:07 +00:00
git init
git config user.email "kernel-team@fedoraproject.org"
git config user.name "Fedora Kernel Team"
git config gc.auto 0
git add .
git commit -a -q -m "baseline"
initial srpm import
2010-07-29 23:46:31 +00:00
cd ..
fi
%endif
else
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
# We already have all vanilla dirs, just change to the top-level directory.
cd kernel-%{kversion}%{?dist}
initial srpm import
2010-07-29 23:46:31 +00:00
fi
Port shared source tree updates from f13.
2010-08-02 14:15:45 +00:00
# Now build the fedora kernel tree.
copy kernel trees around with 'cp -al' so symlinks are preserved. Fixes weird build failures with coreutils 8.22 (rhbz 1044801)
2013-12-19 12:09:22 +00:00
cp -al vanilla-%{vanillaversion} linux-%{KVERREL}
initial srpm import
2010-07-29 23:46:31 +00:00
Build in a fully versioned directory Switch to building in linux-%{KVERREL} so we have a fully versioned directory. This also helps (but doesn't solve) rhbz 751195.
2012-02-22 23:54:17 +00:00
cd linux-%{KVERREL}
Linux v4.2 Also add a check for a created git dir. We don't handle the released_kernel case otherwise. I'll have to go back and fix this later.
2015-08-31 15:28:03 +00:00
if [ ! -d .git ]; then
git init
git config user.email "kernel-team@fedoraproject.org"
git config user.name "Fedora Kernel Team"
git config gc.auto 0
git add .
git commit -a -q -m "baseline"
fi
initial srpm import
2010-07-29 23:46:31 +00:00
# released_kernel with possible stable updates
%if 0%{?stable_base}
Use git to apply patches
2015-07-09 19:46:07 +00:00
# This is special because the kernel spec is hell and nothing is consistent
xzcat %{SOURCE5000} | patch -p1 -F1 -s
git commit -a -m "Stable update"
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
configs: Update scripts and spec file with layout changes With the configs in the new place, update the scripts to find them and utilize the base-generic and generic heirarchy to apply configs and overrides. Implement new process_configs.sh script that post-process the config changes in a simple script and remove those commands from the spec file. Add option flags to preserve functionality. config_generation is a simple rename of baseconfig -> generic and debugconfig -> debug and arm64 -> aarach64. build_configs.sh is modified to find configs in generic and base-generic and then apply base-generic first and if any generic files, apply those next. The generic directory is used as an overrides and is expected to be empty for Fedora initially. kernel.spec is modified to use process_configs.sh instead of all the commands in the spec file. Enabled spec options are translated to script options. The config manipulation is moved to be grouped with all config manipulation commands. This makes 'cd configs/' simpler. Now all config scripts and executiion are done in configs/ directory. v1 -> v2: * the scripts were not working with SUBARCH correctly * checkoptions was using wrong comparison file * passing wrong kernel version to process_configs in spec file v2 -> v3: (incorporate Laura A's feedback) * update README.txt * fix build_configs.sh warnings * Output info message on listnewconfig failure
2017-11-06 22:00:42 +00:00
# Note: Even in the "nopatches" path some patches (build tweaks and compile
# fixes) will always get applied; see patch defition above for details
git am %{patches}
# END OF PATCH APPLICATIONS
# Any further pre-build tree manipulations happen here.
chmod +x scripts/checkpatch.pl
Build fixups - Make sure tools/objtool/sync-check.sh is executable - Drop patch that needs a rebase
2017-11-27 21:33:44 +00:00
chmod +x tools/objtool/sync-check.sh
Linux v4.16-11490-gb284d4d5a678
2018-04-11 16:12:16 +00:00
mv COPYING COPYING-%{version}
configs: Update scripts and spec file with layout changes With the configs in the new place, update the scripts to find them and utilize the base-generic and generic heirarchy to apply configs and overrides. Implement new process_configs.sh script that post-process the config changes in a simple script and remove those commands from the spec file. Add option flags to preserve functionality. config_generation is a simple rename of baseconfig -> generic and debugconfig -> debug and arm64 -> aarach64. build_configs.sh is modified to find configs in generic and base-generic and then apply base-generic first and if any generic files, apply those next. The generic directory is used as an overrides and is expected to be empty for Fedora initially. kernel.spec is modified to use process_configs.sh instead of all the commands in the spec file. Enabled spec options are translated to script options. The config manipulation is moved to be grouped with all config manipulation commands. This makes 'cd configs/' simpler. Now all config scripts and executiion are done in configs/ directory. v1 -> v2: * the scripts were not working with SUBARCH correctly * checkoptions was using wrong comparison file * passing wrong kernel version to process_configs in spec file v2 -> v3: (incorporate Laura A's feedback) * update README.txt * fix build_configs.sh warnings * Output info message on listnewconfig failure
2017-11-06 22:00:42 +00:00
# This Prevents scripts/setlocalversion from mucking with our version numbers.
touch .scmversion
# Deal with configs stuff
mkdir configs
cd configs
initial srpm import
2010-07-29 23:46:31 +00:00
# Drop some necessary files from the source dir into the buildroot
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
cp $RPM_SOURCE_DIR/kernel-*.config .
cp %{SOURCE1000} .
initial srpm import
2010-07-29 23:46:31 +00:00
cp %{SOURCE15} .
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
cp %{SOURCE40} .
cp %{SOURCE41} .
Generate BootLoaderSpec config fragments The BootLoaderSpec (BLS) defines a scheme where different bootloaders can share a format for boot items and a configuration directory that accepts these common configurations as drop-in files [0]. Generate BLS snippets at build time that can be copied on kernel install, so bootloaders can parse to create menu entries using this information. [0]: https://www.freedesktop.org/wiki/Specifications/BootLoaderSpec/ Signed-off-by: Peter Jones <pjones@redhat.com>
2016-12-15 15:34:30 +00:00
cp %{SOURCE43} .
initial srpm import
2010-07-29 23:46:31 +00:00
Make rpmbuild option "without_debug" work properly on rawhide.
2011-10-23 04:17:53 +00:00
%if !%{debugbuildsenabled}
# The normal build is a really debug build and the user has explicitly requested
Add build option "--with=release" to build a non-debug kernel in rawhide.
2011-10-27 15:47:50 +00:00
# a release kernel. Change the config files into non-debug versions.
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
%if !%{with_release}
VERSION=%{version} ./generate_debug_configs.sh
%else
VERSION=%{version} ./generate_all_configs.sh
Make rpmbuild option "without_debug" work properly on rawhide.
2011-10-23 04:17:53 +00:00
%endif
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
%else
VERSION=%{version} ./generate_all_configs.sh
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
Add support for local rebuild config option overrides Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-01-07 21:40:18 +00:00
# Merge in any user-provided local config option changes
Don't try and merge local config changes on arches we aren't building
2014-05-13 15:29:55 +00:00
%ifnarch %nobuildarches
attempt to fix config-local, by only applying the overrides to the target configs
2014-01-22 16:01:13 +00:00
for i in %{all_arch_configs}
Add support for local rebuild config option overrides Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-01-07 21:40:18 +00:00
do
mv $i $i.tmp
./merge.pl %{SOURCE1000} $i.tmp > $i
rm $i.tmp
done
Don't try and merge local config changes on arches we aren't building
2014-05-13 15:29:55 +00:00
%endif
Add support for local rebuild config option overrides Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-01-07 21:40:18 +00:00
initial srpm import
2010-07-29 23:46:31 +00:00
# only deal with configs if we are going to build for the arch
%ifnarch %nobuildarches
%if !%{debugbuildsenabled}
rm -f kernel-%{version}-*debug.config
%endif
Introduce infrastructure for cross-compiling Fedora kernels Intended to assist building for secondary architectures like ppc64, s390x, and arm. To use, create an .src.rpm using "fedpkg srpm" and then run "rpmbuild --rebuild --with cross --without perf --without tools \ kernel*.src.rpm" to cross compile. This requires binutils and gcc packages named like %_target_cpu, which all but powerpc64 currently provides in rawhide/F-19. Can't (currently) cross compile perf or kernel-tools, since libc is missing from the cross environment.
2013-06-13 21:24:01 +00:00
%define make make %{?cross_opts}
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CheckConfigs() {
./check_configs.awk $1 $2 > .mismatches
if [ -s .mismatches ]
then
echo "Error: Mismatches found in configuration files"
cat .mismatches
exit 1
fi
}
cp %{SOURCE42} .
configs: Update scripts and spec file with layout changes With the configs in the new place, update the scripts to find them and utilize the base-generic and generic heirarchy to apply configs and overrides. Implement new process_configs.sh script that post-process the config changes in a simple script and remove those commands from the spec file. Add option flags to preserve functionality. config_generation is a simple rename of baseconfig -> generic and debugconfig -> debug and arm64 -> aarach64. build_configs.sh is modified to find configs in generic and base-generic and then apply base-generic first and if any generic files, apply those next. The generic directory is used as an overrides and is expected to be empty for Fedora initially. kernel.spec is modified to use process_configs.sh instead of all the commands in the spec file. Enabled spec options are translated to script options. The config manipulation is moved to be grouped with all config manipulation commands. This makes 'cd configs/' simpler. Now all config scripts and executiion are done in configs/ directory. v1 -> v2: * the scripts were not working with SUBARCH correctly * checkoptions was using wrong comparison file * passing wrong kernel version to process_configs in spec file v2 -> v3: (incorporate Laura A's feedback) * update README.txt * fix build_configs.sh warnings * Output info message on listnewconfig failure
2017-11-06 22:00:42 +00:00
OPTS=""
On rebases, list new config options. (Revert to pre-18 behaviour)
2012-12-18 20:51:22 +00:00
%if %{listnewconfig_fail}
configs: Update scripts and spec file with layout changes With the configs in the new place, update the scripts to find them and utilize the base-generic and generic heirarchy to apply configs and overrides. Implement new process_configs.sh script that post-process the config changes in a simple script and remove those commands from the spec file. Add option flags to preserve functionality. config_generation is a simple rename of baseconfig -> generic and debugconfig -> debug and arm64 -> aarach64. build_configs.sh is modified to find configs in generic and base-generic and then apply base-generic first and if any generic files, apply those next. The generic directory is used as an overrides and is expected to be empty for Fedora initially. kernel.spec is modified to use process_configs.sh instead of all the commands in the spec file. Enabled spec options are translated to script options. The config manipulation is moved to be grouped with all config manipulation commands. This makes 'cd configs/' simpler. Now all config scripts and executiion are done in configs/ directory. v1 -> v2: * the scripts were not working with SUBARCH correctly * checkoptions was using wrong comparison file * passing wrong kernel version to process_configs in spec file v2 -> v3: (incorporate Laura A's feedback) * update README.txt * fix build_configs.sh warnings * Output info message on listnewconfig failure
2017-11-06 22:00:42 +00:00
OPTS="$OPTS -n"
On rebases, list new config options. (Revert to pre-18 behaviour)
2012-12-18 20:51:22 +00:00
%endif
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
%if %{configmismatch_fail}
configs: Update scripts and spec file with layout changes With the configs in the new place, update the scripts to find them and utilize the base-generic and generic heirarchy to apply configs and overrides. Implement new process_configs.sh script that post-process the config changes in a simple script and remove those commands from the spec file. Add option flags to preserve functionality. config_generation is a simple rename of baseconfig -> generic and debugconfig -> debug and arm64 -> aarach64. build_configs.sh is modified to find configs in generic and base-generic and then apply base-generic first and if any generic files, apply those next. The generic directory is used as an overrides and is expected to be empty for Fedora initially. kernel.spec is modified to use process_configs.sh instead of all the commands in the spec file. Enabled spec options are translated to script options. The config manipulation is moved to be grouped with all config manipulation commands. This makes 'cd configs/' simpler. Now all config scripts and executiion are done in configs/ directory. v1 -> v2: * the scripts were not working with SUBARCH correctly * checkoptions was using wrong comparison file * passing wrong kernel version to process_configs in spec file v2 -> v3: (incorporate Laura A's feedback) * update README.txt * fix build_configs.sh warnings * Output info message on listnewconfig failure
2017-11-06 22:00:42 +00:00
OPTS="$OPTS -c"
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
%endif
configs: Update scripts and spec file with layout changes With the configs in the new place, update the scripts to find them and utilize the base-generic and generic heirarchy to apply configs and overrides. Implement new process_configs.sh script that post-process the config changes in a simple script and remove those commands from the spec file. Add option flags to preserve functionality. config_generation is a simple rename of baseconfig -> generic and debugconfig -> debug and arm64 -> aarach64. build_configs.sh is modified to find configs in generic and base-generic and then apply base-generic first and if any generic files, apply those next. The generic directory is used as an overrides and is expected to be empty for Fedora initially. kernel.spec is modified to use process_configs.sh instead of all the commands in the spec file. Enabled spec options are translated to script options. The config manipulation is moved to be grouped with all config manipulation commands. This makes 'cd configs/' simpler. Now all config scripts and executiion are done in configs/ directory. v1 -> v2: * the scripts were not working with SUBARCH correctly * checkoptions was using wrong comparison file * passing wrong kernel version to process_configs in spec file v2 -> v3: (incorporate Laura A's feedback) * update README.txt * fix build_configs.sh warnings * Output info message on listnewconfig failure
2017-11-06 22:00:42 +00:00
./process_configs.sh $OPTS kernel %{rpmversion}
initial srpm import
2010-07-29 23:46:31 +00:00
# end of kernel config
%endif
configs: Update scripts and spec file with layout changes With the configs in the new place, update the scripts to find them and utilize the base-generic and generic heirarchy to apply configs and overrides. Implement new process_configs.sh script that post-process the config changes in a simple script and remove those commands from the spec file. Add option flags to preserve functionality. config_generation is a simple rename of baseconfig -> generic and debugconfig -> debug and arm64 -> aarach64. build_configs.sh is modified to find configs in generic and base-generic and then apply base-generic first and if any generic files, apply those next. The generic directory is used as an overrides and is expected to be empty for Fedora initially. kernel.spec is modified to use process_configs.sh instead of all the commands in the spec file. Enabled spec options are translated to script options. The config manipulation is moved to be grouped with all config manipulation commands. This makes 'cd configs/' simpler. Now all config scripts and executiion are done in configs/ directory. v1 -> v2: * the scripts were not working with SUBARCH correctly * checkoptions was using wrong comparison file * passing wrong kernel version to process_configs in spec file v2 -> v3: (incorporate Laura A's feedback) * update README.txt * fix build_configs.sh warnings * Output info message on listnewconfig failure
2017-11-06 22:00:42 +00:00
cd ..
# End of Configs stuff
Remove infrastructure related to compat-wireless integration
2012-03-13 17:26:37 +00:00
# get rid of unwanted files resulting from patch fuzz
Cleanup some old config options, remove DRM drivers hidden behind DRM_LEGACY, tweak module filters a little (fpga, iio, few other bits), minor find optimisation
2018-08-16 19:01:58 +00:00
find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null
Remove infrastructure related to compat-wireless integration
2012-03-13 17:26:37 +00:00
remove .gitignores from the source tree, so they don't end up getting packaged.
2010-10-26 17:56:20 +00:00
# remove unnecessary SCM files
Cleanup some old config options, remove DRM drivers hidden behind DRM_LEGACY, tweak module filters a little (fpga, iio, few other bits), minor find optimisation
2018-08-16 19:01:58 +00:00
find . -name .gitignore -delete >/dev/null
remove .gitignores from the source tree, so they don't end up getting packaged.
2010-10-26 17:56:20 +00:00
Only fix shebangs when building for Fedora. If the kernel is being built for .el7, we don't have access to pathfix.py.
2019-01-15 09:44:08 +00:00
%if 0%{?fedora}
Mangle Python shebangs to Python 3 only
2018-09-18 19:56:33 +00:00
# Mangle /usr/bin/python shebangs to /usr/bin/python3
# Mangle all Python shebangs to be Python 3 explicitly
# -p preserves timestamps
# -n prevents creating ~backup files
# -i specifies the interpreter for the shebang
pathfix.py -pni "%{__python3} %{py3_shbang_opts}" scripts/
pathfix.py -pni "%{__python3} %{py3_shbang_opts}" scripts/diffconfig
pathfix.py -pni "%{__python3} %{py3_shbang_opts}" scripts/bloat-o-meter
pathfix.py -pni "%{__python3} %{py3_shbang_opts}" scripts/show_delta
Only fix shebangs when building for Fedora. If the kernel is being built for .el7, we don't have access to pathfix.py.
2019-01-15 09:44:08 +00:00
%endif
Mangle Python shebangs to Python 3 only
2018-09-18 19:56:33 +00:00
initial srpm import
2010-07-29 23:46:31 +00:00
cd ..
###
### build
###
%build
%if %{with_sparse}
%define sparse_mflags C=1
%endif
cp_vmlinux()
{
eu-strip --remove-comment -o "$2" "$1"
}
Proper support for parallel debuginfo and hardening flags
2018-07-12 19:40:31 +00:00
# These are for host programs that get built as part of the kernel and
# are required to be packaged in kernel-devel for building external modules.
# Since they are userspace binaries, they are required to pickup the hardening
# flags defined in the macros. The --build-id=uuid is a trick to get around
# debuginfo limitations: Typically, find-debuginfo.sh will update the build
# id of all binaries to allow for parllel debuginfo installs. The kernel
# can't use this because it breaks debuginfo for the vDSO so we have to
# use a special mechanism for kernel and modules to be unique. Unfortunately,
# we still have userspace binaries which need unique debuginfo and because
# they come from the kernel package, we can't just use find-debuginfo.sh to
# rewrite only those binaries. The easiest option right now is just to have
# the build id be a uuid for the host programs.
Fix cross build issues (rhbz 1607158) The %{build_cflags} and %{build_ldflags} assume host == arch which isn't true on cross builds. Don't use these flags when cross building.
2018-07-23 17:17:44 +00:00
#
# Note we need to disable these flags for cross builds because the flags
# from redhat-rpm-config assume that host == target so target arch
# flags cause issues with the host compiler.
%if !%{with_cross}
Make buildflags optional build_hostcflags and build_hostldflags may not be defined on all systems. Make them optional for compatibility. [labbott: Add more commit text]
2018-10-11 18:43:47 +00:00
%define build_hostcflags %{?build_cflags}
%define build_hostldflags %{?build_ldflags} -Wl,--build-id=uuid
Fix cross build issues (rhbz 1607158) The %{build_cflags} and %{build_ldflags} assume host == arch which isn't true on cross builds. Don't use these flags when cross building.
2018-07-23 17:17:44 +00:00
%endif
Proper support for parallel debuginfo and hardening flags
2018-07-12 19:40:31 +00:00
initial srpm import
2010-07-29 23:46:31 +00:00
BuildKernel() {
MakeTarget=$1
KernelImage=$2
Enable the vDSO for arm LPAE The vDSO can be used on arm as well. The only supported platforms have LPAE enabled so only enable it there.
2017-05-31 17:42:28 +00:00
Flavour=$4
DoVDSO=$3
let flavors/variants end with + in the uname
2013-07-22 20:51:25 +00:00
Flav=${Flavour:++${Flavour}}
Enable the vDSO for arm LPAE The vDSO can be used on arm as well. The only supported platforms have LPAE enabled so only enable it there.
2017-05-31 17:42:28 +00:00
InstallName=${5:-vmlinuz}
initial srpm import
2010-07-29 23:46:31 +00:00
# Pick the right config file for the kernel we're building
Config=kernel-%{version}-%{_target_cpu}${Flavour:+-${Flavour}}.config
flavour flav in the hiz-ouse
2013-01-25 15:00:02 +00:00
DevelDir=/usr/src/kernels/%{KVERREL}${Flav}
initial srpm import
2010-07-29 23:46:31 +00:00
# When the bootable image is just the ELF kernel, strip it.
# We already copy the unstripped file into the debuginfo package.
if [ "$KernelImage" = vmlinux ]; then
CopyKernel=cp_vmlinux
else
CopyKernel=cp
fi
flavour flav in the hiz-ouse
2013-01-25 15:00:02 +00:00
KernelVer=%{version}-%{release}.%{_target_cpu}${Flav}
initial srpm import
2010-07-29 23:46:31 +00:00
echo BUILDING A KERNEL FOR ${Flavour} %{_target_cpu}...
Linux-3.1-rc1 Adjust Makefile munging for 3.x numbering scheme
2011-08-08 14:17:46 +00:00
%if 0%{?stable_update}
# make sure SUBLEVEL is incremented on a stable release. Sigh 3.x.
perl -p -i -e "s/^SUBLEVEL.*/SUBLEVEL = %{?stablerev}/" Makefile
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
# make sure EXTRAVERSION says what we want it to say
Trim EXTRAVERSION in the Makefile on CI builds The CI build currently adds the full git commit hash to the release of the RPM it builds. This breaks the kernel build as the EXTRAVERSION cannot exceed 64 characters. This sets the EXTRAVERSION to whatever the release was minus ".pr.<hash>". Signed-off-by: Jeremy Cline <jcline@redhat.com>
2018-10-04 16:41:41 +00:00
# Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
Don't require python3 for a string replace
2019-01-15 09:44:09 +00:00
ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
Trim EXTRAVERSION in the Makefile on CI builds The CI build currently adds the full git commit hash to the release of the RPM it builds. This breaks the kernel build as the EXTRAVERSION cannot exceed 64 characters. This sets the EXTRAVERSION to whatever the release was minus ".pr.<hash>". Signed-off-by: Jeremy Cline <jcline@redhat.com>
2018-10-04 16:41:41 +00:00
perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Flav}/" Makefile
initial srpm import
2010-07-29 23:46:31 +00:00
Adjust sedding for the 3.x release style now that we know it's 3.x.x and not just 3.x
2011-07-29 17:55:57 +00:00
# if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
initial srpm import
2010-07-29 23:46:31 +00:00
%if !0%{?rcrev}
%if 0%{?gitrev}
Adjust sedding for the 3.x release style now that we know it's 3.x.x and not just 3.x
2011-07-29 17:55:57 +00:00
perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{upstream_sublevel}/' Makefile
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
%endif
# and now to start the build process
Add verbose option There may be cases when it's useful to see the full kernel build output. Add an option to allow rebuilding with full logs. From Jaroslav Škarvada
2018-01-17 16:32:46 +00:00
make %{?make_opts} mrproper
initial srpm import
2010-07-29 23:46:31 +00:00
cp configs/$Config .config
Linux v4.5-rc7-116-ge2857b8
2016-03-08 16:37:50 +00:00
%if %{signkernel}%{signmodules}
Linux v4.2-10637-ga794b4f32921 - Rework secure boot patchset
2015-09-09 15:10:06 +00:00
cp %{SOURCE11} certs/.
Update modsign to add 'make modules_sign' target with latest upstream
2012-10-23 16:02:53 +00:00
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
Arch=`head -1 .config | cut -b 3-`
echo USING ARCH=$Arch
Fix cross build issues (rhbz 1607158) The %{build_cflags} and %{build_ldflags} assume host == arch which isn't true on cross builds. Don't use these flags when cross building.
2018-07-23 17:17:44 +00:00
make %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}" ARCH=$Arch olddefconfig
Proper support for parallel debuginfo and hardening flags
2018-07-12 19:40:31 +00:00
# This ensures build-ids are unique to allow parallel debuginfo
perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
Fix cross build issues (rhbz 1607158) The %{build_cflags} and %{build_ldflags} assume host == arch which isn't true on cross builds. Don't use these flags when cross building.
2018-07-23 17:17:44 +00:00
%{make} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}" ARCH=$Arch %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
%{make} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}" ARCH=$Arch %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
Reenable perf on ARM (was suppose to be temporary), Build and package dtbs on ARM
2013-01-27 16:17:49 +00:00
kernel.spec: no more files in /boot This patch is to install everything to /lib/modules/$KERNEL_VERSION and only have %ghost files for /boot files. Installation in %posttrans with kernel-install should work already. F20: systemd >= 208-31 F21: systemd >= 216-21 F >= 22: systemd >= 215-12 The main target is to have all rpms install only to /usr, so in the end we would have a self contained installation in /usr. As of now, we still have to cope with /var and /etc, but you have to start somewhere.
2015-05-04 17:22:47 +00:00
mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
%if %{with_debuginfo}
mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
%endif
[arm64] install dtbs
2013-09-03 15:49:09 +00:00
%ifarch %{arm} aarch64
Add verbose option There may be cases when it's useful to see the full kernel build output. Add an option to allow rebuilding with full logs. From Jaroslav Škarvada
2018-01-17 16:32:46 +00:00
%{make} %{?make_opts} ARCH=$Arch dtbs dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
Correct dtb copying
2015-05-11 18:35:02 +00:00
cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
use -delete on find commands where possible rather than forking out to xargs/rm
2018-10-14 09:21:30 +00:00
find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
LLSYMS_EXTRA_PASS=1 is only able to be set via environment variables pass it in on the make line for arm only
2012-04-12 15:47:31 +00:00
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
# Start installing the results
install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
kernel.spec: no more files in /boot This patch is to install everything to /lib/modules/$KERNEL_VERSION and only have %ghost files for /boot files. Installation in %posttrans with kernel-install should work already. F20: systemd >= 208-31 F21: systemd >= 216-21 F >= 22: systemd >= 215-12 The main target is to have all rpms install only to /usr, so in the end we would have a self contained installation in /usr. As of now, we still have to cope with /var and /etc, but you have to start somewhere.
2015-05-04 17:22:47 +00:00
install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
initial srpm import
2010-07-29 23:46:31 +00:00
install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
kernel.spec: no more files in /boot This patch is to install everything to /lib/modules/$KERNEL_VERSION and only have %ghost files for /boot files. Installation in %posttrans with kernel-install should work already. F20: systemd >= 208-31 F21: systemd >= 216-21 F >= 22: systemd >= 215-12 The main target is to have all rpms install only to /usr, so in the end we would have a self contained installation in /usr. As of now, we still have to cope with /var and /etc, but you have to start somewhere.
2015-05-04 17:22:47 +00:00
install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map
initial srpm import
2010-07-29 23:46:31 +00:00
# We estimate the size of the initramfs because rpm needs to take this size
# into consideration when performing disk space calculations. (See bz #530778)
dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
if [ -f arch/$Arch/boot/zImage.stub ]; then
cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
kernel.spec: no more files in /boot This patch is to install everything to /lib/modules/$KERNEL_VERSION and only have %ghost files for /boot files. Installation in %posttrans with kernel-install should work already. F20: systemd >= 208-31 F21: systemd >= 216-21 F >= 22: systemd >= 215-12 The main target is to have all rpms install only to /usr, so in the end we would have a self contained installation in /usr. As of now, we still have to cope with /var and /etc, but you have to start somewhere.
2015-05-04 17:22:47 +00:00
cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
initial srpm import
2010-07-29 23:46:31 +00:00
fi
Linux v4.5-rc7-116-ge2857b8
2016-03-08 16:37:50 +00:00
%if %{signkernel}
Sign kernels with pesign if we're build with signmodules. This is jwb's patch modified to work with %pesign .
2012-08-14 19:40:18 +00:00
# Sign the image if we're using EFI
%pesign -s -i $KernelImage -o vmlinuz.signed
Add zero file length check to make sure pesign didn't fail (rhbz 991808)
2013-08-07 13:45:49 +00:00
if [ ! -s vmlinuz.signed ]; then
echo "pesigning failed"
exit 1
fi
Sign kernels with pesign if we're build with signmodules. This is jwb's patch modified to work with %pesign .
2012-08-14 19:40:18 +00:00
mv vmlinuz.signed $KernelImage
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
$CopyKernel $KernelImage \
kernel.spec: Fix up mixed indents There are several instances of mixed spaces and tabs throughout the kernel. This makes vim yell and rpmlint complain, so.... It doesn't look like there was any consistency in the expected tab widths used, so I just tried to line things up as it appears to have been intended. [labbott: Tweaked commit text, fixed ever popular kenrel typo]
2016-08-04 09:41:33 +00:00
$RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
initial srpm import
2010-07-29 23:46:31 +00:00
chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
kernel.spec: no more files in /boot This patch is to install everything to /lib/modules/$KERNEL_VERSION and only have %ghost files for /boot files. Installation in %posttrans with kernel-install should work already. F20: systemd >= 208-31 F21: systemd >= 216-21 F >= 22: systemd >= 215-12 The main target is to have all rpms install only to /usr, so in the end we would have a self contained installation in /usr. As of now, we still have to cope with /var and /etc, but you have to start somewhere.
2015-05-04 17:22:47 +00:00
cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName
initial srpm import
2010-07-29 23:46:31 +00:00
Ship hmac file for vmlinuz for FIPS-140 (rhbz 805538)
2012-03-21 19:09:49 +00:00
# hmac sign the kernel for FIPS
echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
sha512hmac $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer | sed -e "s,$RPM_BUILD_ROOT,," > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
kernel.spec: no more files in /boot This patch is to install everything to /lib/modules/$KERNEL_VERSION and only have %ghost files for /boot files. Installation in %posttrans with kernel-install should work already. F20: systemd >= 208-31 F21: systemd >= 216-21 F >= 22: systemd >= 215-12 The main target is to have all rpms install only to /usr, so in the end we would have a self contained installation in /usr. As of now, we still have to cope with /var and /etc, but you have to start somewhere.
2015-05-04 17:22:47 +00:00
cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac
Ship hmac file for vmlinuz for FIPS-140 (rhbz 805538)
2012-03-21 19:09:49 +00:00
initial srpm import
2010-07-29 23:46:31 +00:00
# Override $(mod-fw) because we don't want it to install any firmware
Drop the kernel-firmware subpackage from the spec file We've depended on linux-firmware as a separate package for enough releases, and kernel-firmware hasn't had firmware updated in it for a long time.
2011-10-26 14:18:33 +00:00
# we'll get it from the linux-firmware package and we don't want conflicts
Add verbose option There may be cases when it's useful to see the full kernel build output. Add an option to allow rebuilding with full logs. From Jaroslav Škarvada
2018-01-17 16:32:46 +00:00
%{make} %{?make_opts} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT modules_install KERNELRELEASE=$KernelVer mod-fw=
Add kernel module signing on x86 Leave enforcing disabled for now, so unsigned modules can still load. This can be switched by adding "enforcemodulesig=1" to the kernel command line.
2012-03-06 21:09:57 +00:00
Drop placeholder ld.so.conf files https://bugzilla.redhat.com/show_bug.cgi?id=1381764
2018-02-28 09:21:21 +00:00
# add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
echo '%%defattr(-,-,-)' > ../kernel${Flavour:+-${Flavour}}-ldsoconf.list
Enable the vDSO for arm LPAE The vDSO can be used on arm as well. The only supported platforms have LPAE enabled so only enable it there.
2017-05-31 17:42:28 +00:00
if [ $DoVDSO -ne 0 ]; then
Add verbose option There may be cases when it's useful to see the full kernel build output. Add an option to allow rebuilding with full logs. From Jaroslav Škarvada
2018-01-17 16:32:46 +00:00
%{make} %{?make_opts} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
Drop placeholder ld.so.conf files https://bugzilla.redhat.com/show_bug.cgi?id=1381764
2018-02-28 09:21:21 +00:00
if [ -s ldconfig-kernel.conf ]; then
install -D -m 444 ldconfig-kernel.conf \
$RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Flavour:+-${Flavour}}-ldsoconf.list
Enable the vDSO for arm LPAE The vDSO can be used on arm as well. The only supported platforms have LPAE enabled so only enable it there.
2017-05-31 17:42:28 +00:00
fi
rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
initial srpm import
2010-07-29 23:46:31 +00:00
fi
# And save the headers/makefiles etc for building modules against
#
# This all looks scary, but the end result is supposed to be:
# * all arch relevant include/ files
# * all Makefile/Kconfig files
# * all script/ files
rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
(cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
# dirs for additional modules per module-init-tools, kbuild/modules.txt
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/extra
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
# first copy everything
cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
if [ -s Module.markers ]; then
cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
fi
# then drop all but the needed Makefiles/Kconfig files
rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Documentation
rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
Make sure to install objtool in -devel subpackage if it exists (rhbz 1321628)
2016-03-30 17:50:01 +00:00
if [ -f tools/objtool/objtool ]; then
Revert "Cleanup some binaries for kernel-devel (rhbz 1550152)" This reverts commit 842f170f35de359b0c58707f8afca29d63ff631e. It turns out that despite having all the source files available, the kernel make system is not smart enough to automatically rebuild certain things like modpost or recordmcount when building an external modules. Really if we're going to have to copy everything under the sun so 'make prepare' succeeds it would be nice just to build things. But that requires more discussion upstream so just revert this change for now. Long live external modules.
2018-03-22 18:43:13 +00:00
cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
Fix "make prepare" Copy a bunch more files (mostly related to objtool) to let "make prepare" succeed.
2018-03-02 01:35:33 +00:00
# these are a few files associated with objtool
cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
# also more than necessary but it's not that many more files
cp -a --parents tools/objtool/* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents tools/lib/str_error_r.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents tools/lib/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents tools/lib/subcmd/* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
Make sure to install objtool in -devel subpackage if it exists (rhbz 1321628)
2016-03-30 17:50:01 +00:00
fi
initial srpm import
2010-07-29 23:46:31 +00:00
if [ -d arch/$Arch/scripts ]; then
cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
fi
if [ -f arch/$Arch/*lds ]; then
cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
fi
Fix for building out of tree modules on powerpc (rhbz 1574604)
2018-05-03 21:18:04 +00:00
if [ -f arch/%{asmarch}/kernel/module.lds ]; then
cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
fi
initial srpm import
2010-07-29 23:46:31 +00:00
rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*.o
rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*/*.o
Remove references to old powerpc We only support one powerpc target. Drop references via the older macro to make the code easier to read.
2019-04-24 22:04:53 +00:00
%ifarch ppc64le
initial srpm import
2010-07-29 23:46:31 +00:00
cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
%endif
if [ -d arch/%{asmarch}/include ]; then
cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
fi
install arch/arm/include/asm/xen headers on aarch64
2014-05-05 21:46:26 +00:00
%ifarch aarch64
# arch/arm64/include/asm/xen references arch/arm
cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
add 32-bit ARM opcodes.h to kernel-devel rpm 64-bit ARM opcodes.h references the 32-bit version: $ cat arch/arm64/include/asm/opcodes.h #include <../../arm/include/asm/opcodes.h> Include the 32-bit ARM opcodes.h in kernel-devel so tools like SystemTap can use it (see RHBZ 1291868). Signed-off-by: Jeff Bastian <jbastian@redhat.com>
2015-12-15 19:07:02 +00:00
# arch/arm64/include/asm/opcodes.h references arch/arm
cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
install arch/arm/include/asm/xen headers on aarch64
2014-05-05 21:46:26 +00:00
%endif
ARM: include the mach- headers on arm arches if they are available
2012-06-28 19:06:48 +00:00
# include the machine specific headers for ARM variants, if available.
%ifarch %{arm}
if [ -d arch/%{asmarch}/mach-${Flavour}/include ]; then
cp -a --parents arch/%{asmarch}/mach-${Flavour}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
fi
Let 'make prepare' succeed with kernel-devel Due to a few missing files, running 'make prepare' on the kernel-devel sources will fail. This isn't a huge issue but can lead to confusion for users who are trying to follow tutorials elsewhere that may mention running make prepare. Copy the necessary files over to the devel package.
2016-02-05 22:54:17 +00:00
# include a few files for 'make prepare'
cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
ARM: include the mach- headers on arm arches if they are available
2012-06-28 19:06:48 +00:00
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
Let 'make prepare' succeed with kernel-devel Due to a few missing files, running 'make prepare' on the kernel-devel sources will fail. This isn't a huge issue but can lead to confusion for users who are trying to follow tutorials elsewhere that may mention running make prepare. Copy the necessary files over to the devel package.
2016-02-05 22:54:17 +00:00
%ifarch %{ix86} x86_64
# files for 'make prepare' to succeed with kernel-devel
cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/entry/syscalls/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/entry/syscalls/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
Fix "make prepare" Copy a bunch more files (mostly related to objtool) to let "make prepare" succeed.
2018-03-02 01:35:33 +00:00
# Yes this is more includes than we probably need. Feel free to sort out
# dependencies if you so choose.
cp -a --parents tools/include/* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
Let 'make prepare' succeed with kernel-devel Due to a few missing files, running 'make prepare' on the kernel-devel sources will fail. This isn't a huge issue but can lead to confusion for users who are trying to follow tutorials elsewhere that may mention running make prepare. Copy the necessary files over to the devel package.
2016-02-05 22:54:17 +00:00
cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
# Make sure the Makefile and version.h have a matching timestamp so that
# external modules can be built
Linux v3.7-rc2-145-g4864ccb
2012-10-25 19:52:49 +00:00
touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h
Don't create empty include/linux/autoconf.h in kernel-devel (rhbz 854689)
2012-09-05 18:20:56 +00:00
initial srpm import
2010-07-29 23:46:31 +00:00
# Copy .config to include/config/auto.conf so "make prepare" is unnecessary.
cp $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/.config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
Convert fancy_debuginfo into with_debuginfo in the 21st century
2011-10-26 14:53:45 +00:00
%if %{with_debuginfo}
Update debuginfo generation Once upon a time, the kernel needed a lot of special handling to generate proper debuginfo as the kernel was ahead in technology. These days, rpm has improved debuginfo support. The kernel has not kept up with this and it's forward looking calls are now out of date. Switch to more standard invocations of debuginfo calls.
2017-05-23 17:53:02 +00:00
eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
initial srpm import
2010-07-29 23:46:31 +00:00
#
# save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
#
mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
%endif
find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
# mark modules executable so that strip-to-file can strip them
xargs --no-run-if-empty chmod u+x < modnames
# Generate a list of modules for block and networking.
stop using the obsolete forms of grep shortcuts.
2010-10-26 17:49:21 +00:00
grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
initial srpm import
2010-07-29 23:46:31 +00:00
sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
collect_modules_list()
{
sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
Add nvme.ko to modules.block for anaconda
2013-09-17 14:30:52 +00:00
LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
if [ ! -z "$3" ]; then
fix thinko
2013-09-17 16:40:46 +00:00
sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
Add nvme.ko to modules.block for anaconda
2013-09-17 14:30:52 +00:00
fi
initial srpm import
2010-07-29 23:46:31 +00:00
}
collect_modules_list networking \
kernel.spec: Fix up mixed indents There are several instances of mixed spaces and tabs throughout the kernel. This makes vim yell and rpmlint complain, so.... It doesn't look like there was any consistency in the expected tab widths used, so I just tried to line things up as it appears to have been intended. [labbott: Tweaked commit text, fixed ever popular kenrel typo]
2016-08-04 09:41:33 +00:00
'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
initial srpm import
2010-07-29 23:46:31 +00:00
collect_modules_list block \
kernel.spec: Fix up mixed indents There are several instances of mixed spaces and tabs throughout the kernel. This makes vim yell and rpmlint complain, so.... It doesn't look like there was any consistency in the expected tab widths used, so I just tried to line things up as it appears to have been intended. [labbott: Tweaked commit text, fixed ever popular kenrel typo]
2016-08-04 09:41:33 +00:00
'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
initial srpm import
2010-07-29 23:46:31 +00:00
collect_modules_list drm \
kernel.spec: Fix up mixed indents There are several instances of mixed spaces and tabs throughout the kernel. This makes vim yell and rpmlint complain, so.... It doesn't look like there was any consistency in the expected tab widths used, so I just tried to line things up as it appears to have been intended. [labbott: Tweaked commit text, fixed ever popular kenrel typo]
2016-08-04 09:41:33 +00:00
'drm_open|drm_init'
initial srpm import
2010-07-29 23:46:31 +00:00
collect_modules_list modesetting \
kernel.spec: Fix up mixed indents There are several instances of mixed spaces and tabs throughout the kernel. This makes vim yell and rpmlint complain, so.... It doesn't look like there was any consistency in the expected tab widths used, so I just tried to line things up as it appears to have been intended. [labbott: Tweaked commit text, fixed ever popular kenrel typo]
2016-08-04 09:41:33 +00:00
'drm_crtc_init'
initial srpm import
2010-07-29 23:46:31 +00:00
# detect missing or incorrect license tags
rewrite modinfo license check to be less noisy
2013-05-21 18:29:19 +00:00
( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1
initial srpm import
2010-07-29 23:46:31 +00:00
Fix modules.* removal from /lib/modules/$KernelVer
2013-05-24 02:54:14 +00:00
# remove files that will be auto generated by depmod at rpm -i time
pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
rm -f modules.{alias*,builtin.bin,dep*,*map,symbols*,devname,softdep}
popd
Move the modules-extra processing to a script
2012-09-14 16:25:07 +00:00
# Call the modules-extra script to move things around
%{SOURCE17} $RPM_BUILD_ROOT/lib/modules/$KernelVer %{SOURCE16}
Create a kernel-modules-extra subpackage This creates a modules-extra subpackage which places a number of less frequently used modules into the extra directory under /lib/modules/`uname -r`/. This reduces the size of the default kernel package while still allowing those modules to be built and installed if needed. We also limit the security exposure by keeping these modules out of the default install.
2011-11-18 13:04:03 +00:00
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
#
Rename kernel-drivers to kernel-modules
2014-05-02 01:10:44 +00:00
# Generate the kernel-core and kernel-modules files lists
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
#
# Copy the System.map file for depmod to use, and create a backup of the
# full module tree so we can restore it after we're done filtering
cp System.map $RPM_BUILD_ROOT/.
pushd $RPM_BUILD_ROOT
mkdir restore
cp -r lib/modules/$KernelVer/* restore/.
# don't include anything going into k-m-e in the file lists
rm -rf lib/modules/$KernelVer/extra
Rename kernel-drivers to kernel-modules
2014-05-02 01:10:44 +00:00
# Find all the module files and filter them out into the core and modules
# lists. This actually removes anything going into -modules from the dir.
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
kernel.spec: Fix up mixed indents There are several instances of mixed spaces and tabs throughout the kernel. This makes vim yell and rpmlint complain, so.... It doesn't look like there was any consistency in the expected tab widths used, so I just tried to line things up as it appears to have been intended. [labbott: Tweaked commit text, fixed ever popular kenrel typo]
2016-08-04 09:41:33 +00:00
cp $RPM_SOURCE_DIR/filter-*.sh .
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%{SOURCE99} modules.list %{_target_cpu}
kernel.spec: Fix up mixed indents There are several instances of mixed spaces and tabs throughout the kernel. This makes vim yell and rpmlint complain, so.... It doesn't look like there was any consistency in the expected tab widths used, so I just tried to line things up as it appears to have been intended. [labbott: Tweaked commit text, fixed ever popular kenrel typo]
2016-08-04 09:41:33 +00:00
rm filter-*.sh
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
# Run depmod on the resulting module tree and make sure it isn't broken
Make depmod call fatal if it errors or warns
2014-04-29 21:28:19 +00:00
depmod -b . -aeF ./System.map $KernelVer &> depmod.out
if [ -s depmod.out ]; then
echo "Depmod failure"
cat depmod.out
exit 1
else
rm depmod.out
fi
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
# remove files that will be auto generated by depmod at rpm -i time
pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
rm -f modules.{alias*,builtin.bin,dep*,*map,symbols*,devname,softdep}
popd
# Go back and find all of the various directories in the tree. We use this
# for the dir lists in kernel-core
Don't list /lib/modules/$KernelVer/kernel twice For quite some time I see warnings like warning: File listed twice: /lib/modules/[...]/kernel when building the kernel-core rpm. This is because that directory is included both in module-dirs.list (and therefor in, basically, kernel-core.list) and in kernel_variant_files(). Tweak the find command that generates module-dirs.list so that this directory is not included in that list anymore. Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
2016-10-12 08:00:05 +00:00
find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
# Cleanup
rm System.map
cp -r restore/* lib/modules/$KernelVer/.
rm -rf restore
popd
# Make sure the files lists start with absolute paths or rpmbuild fails.
# Also add in the dir entries
kernel.spec: xz compress modules on i686 and x86_64 Pretty grody, but it seems to be working... it has to happen after module signing (obviously) and after find-debuginfo.sh runs as well, so tacking it onto the end seems sensible, and then just fixing up the file lists as we go. Provides a nice tidy savings to the disk footprint: kyle@dreadnought:~% for i in kernel-core-3.15.0-0.rc3.git4.1.fc21.x86_64.rpm \ kernel-core-3.15.0-0.rc3.git4.1.fc21.x86_64.rpm.1; do \ rpm -qip $i | grep '^Size'; done Size : 43011603 Size : 81106737 kmod has handed .xz and .gz modules for a long time now, and can cope. I was thinking we might also %ghost the .ko, and have a %post install script that un-xz the modules in /proc/modules, but none of them are big enough for that to be worthwhile I think (maybe XFS, but I doubt it.) --Kyle
2014-05-06 17:02:24 +00:00
sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Flavour:+-${Flavour}}-modules.list
sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Flavour:+-${Flavour}}-core.list
sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Flavour:+-${Flavour}}-core.list
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
# Cleanup
rm -f $RPM_BUILD_ROOT/k-d.list
rm -f $RPM_BUILD_ROOT/modules.list
rm -f $RPM_BUILD_ROOT/module-dirs.list
Switch to using modsign-post-KS upstream with x509 certs
2012-09-25 16:02:24 +00:00
%if %{signmodules}
we don't need .tmp_versions anymore
2013-01-28 15:43:22 +00:00
# Save the signing keys so we can sign the modules in __modsign_install_post
Linux v4.2-10637-ga794b4f32921 - Rework secure boot patchset
2015-09-09 15:10:06 +00:00
cp certs/signing_key.pem certs/signing_key.pem.sign${Flav}
cp certs/signing_key.x509 certs/signing_key.x509.sign${Flav}
Switch to using modsign-post-KS upstream with x509 certs
2012-09-25 16:02:24 +00:00
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
# Move the devel headers out of the root file system
fix thinko in previous commit, resulting in /usr/src/kernels/$ver/build/
2010-12-06 17:49:34 +00:00
mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
initial srpm import
2010-07-29 23:46:31 +00:00
mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
Make build/ point to /usr/src/kernels instead of being relative (rhbz 788125)
2012-02-07 17:02:45 +00:00
# This is going to create a broken link during the build, but we don't use
# it after this point. We need the link to actually point to something
# when kernel-devel is installed, and a relative link doesn't work across
# the F17 UsrMove feature.
ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
don't prune kernel-devel in the %with_headers install section commit c1bdfc8b broke the build on s390 since it is headers only, and had nothing installed in /usr/src/kernels... since kernel-devel is only produced when there's a BuildKernel, just prune '*.cmd' when doing BuildKernel for the same net result.
2010-12-06 15:41:38 +00:00
# prune junk from kernel-devel
one more use -delete on find commands
2018-10-14 16:52:11 +00:00
find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete
Generate BootLoaderSpec config fragments The BootLoaderSpec (BLS) defines a scheme where different bootloaders can share a format for boot items and a configuration directory that accepts these common configurations as drop-in files [0]. Generate BLS snippets at build time that can be copied on kernel install, so bootloaders can parse to create menu entries using this information. [0]: https://www.freedesktop.org/wiki/Specifications/BootLoaderSpec/ Signed-off-by: Peter Jones <pjones@redhat.com>
2016-12-15 15:34:30 +00:00
# build a BLS config for this kernel
Linux v4.16-rc2-62-g79c0ef3e85c0
2018-02-20 16:13:12 +00:00
%{SOURCE43} "$KernelVer" "$RPM_BUILD_ROOT" "%{?variant}"
initial srpm import
2010-07-29 23:46:31 +00:00
}
###
# DO it...
###
# prepare directories
rm -rf $RPM_BUILD_ROOT
mkdir -p $RPM_BUILD_ROOT/boot
mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
Build in a fully versioned directory Switch to building in linux-%{KVERREL} so we have a fully versioned directory. This also helps (but doesn't solve) rhbz 751195.
2012-02-22 23:54:17 +00:00
cd linux-%{KVERREL}
initial srpm import
2010-07-29 23:46:31 +00:00
Enable the vDSO for arm LPAE The vDSO can be used on arm as well. The only supported platforms have LPAE enabled so only enable it there.
2017-05-31 17:42:28 +00:00
initial srpm import
2010-07-29 23:46:31 +00:00
%if %{with_debug}
Enable the vDSO for arm LPAE The vDSO can be used on arm as well. The only supported platforms have LPAE enabled so only enable it there.
2017-05-31 17:42:28 +00:00
BuildKernel %make_target %kernel_image %{_use_vdso} debug
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
%if %{with_pae}
Clean up old PAE code We no longer support i686 PAE. Cleanup some of the cruft that was left behind and de-obfuscate some macros to make it more obvious what's happening.
2019-04-24 22:17:55 +00:00
BuildKernel %make_target %kernel_image %{use_vdso} lpae
setup config for tegra based arm boards, add device tree patches for arm build tegra and omap kernel on arm
2011-08-16 16:33:15 +00:00
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
%if %{with_up}
Enable the vDSO for arm LPAE The vDSO can be used on arm as well. The only supported platforms have LPAE enabled so only enable it there.
2017-05-31 17:42:28 +00:00
BuildKernel %make_target %kernel_image %{_use_vdso}
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
Switch to using modsign-post-KS upstream with x509 certs
2012-09-25 16:02:24 +00:00
# In the modsign case, we do 3 things. 1) We check the "flavour" and hard
# code the value in the following invocations. This is somewhat sub-optimal
# but we're doing this inside of an RPM macro and it isn't as easy as it
# could be because of that. 2) We restore the .tmp_versions/ directory from
# the one we saved off in BuildKernel above. This is to make sure we're
# signing the modules we actually built/installed in that flavour. 3) We
sign all modules with the extras signing script
2013-01-25 18:53:02 +00:00
# grab the arch and invoke mod-sign.sh command to actually sign the modules.
Switch to using modsign-post-KS upstream with x509 certs
2012-09-25 16:02:24 +00:00
#
# We have to do all of those things _after_ find-debuginfo runs, otherwise
# that will strip the signature off of the modules.
ensure modules_sign runs even if debuginfo is not produced tested most of the possible with_* options... hopefully i didn't miss anything.
2013-01-08 20:32:03 +00:00
%define __modsign_install_post \
wat (!= -ne)
2013-04-08 14:31:23 +00:00
if [ "%{signmodules}" -eq "1" ]; then \
simplify the signing stuff now that sign-file takes pub/priv key args also fix %{with_*} tests (which jan stancek sent for rhel, thanks!)
2013-03-28 19:01:42 +00:00
if [ "%{with_pae}" -ne "0" ]; then \
Clean up old PAE code We no longer support i686 PAE. Cleanup some of the cruft that was left behind and de-obfuscate some macros to make it more obvious what's happening.
2019-04-24 22:17:55 +00:00
%{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
Switch to using modsign-post-KS upstream with x509 certs
2012-09-25 16:02:24 +00:00
fi \
simplify the signing stuff now that sign-file takes pub/priv key args also fix %{with_*} tests (which jan stancek sent for rhel, thanks!)
2013-03-28 19:01:42 +00:00
if [ "%{with_debug}" -ne "0" ]; then \
Linux v4.2-10637-ga794b4f32921 - Rework secure boot patchset
2015-09-09 15:10:06 +00:00
%{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
Switch to using modsign-post-KS upstream with x509 certs
2012-09-25 16:02:24 +00:00
fi \
wat (!= -ne)
2013-04-08 14:31:23 +00:00
if [ "%{with_up}" -ne "0" ]; then \
Linux v4.2-10637-ga794b4f32921 - Rework secure boot patchset
2015-09-09 15:10:06 +00:00
%{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
Switch to using modsign-post-KS upstream with x509 certs
2012-09-25 16:02:24 +00:00
fi \
fi \
kernel.spec: xz compress modules on i686 and x86_64 Pretty grody, but it seems to be working... it has to happen after module signing (obviously) and after find-debuginfo.sh runs as well, so tacking it onto the end seems sensible, and then just fixing up the file lists as we go. Provides a nice tidy savings to the disk footprint: kyle@dreadnought:~% for i in kernel-core-3.15.0-0.rc3.git4.1.fc21.x86_64.rpm \ kernel-core-3.15.0-0.rc3.git4.1.fc21.x86_64.rpm.1; do \ rpm -qip $i | grep '^Size'; done Size : 43011603 Size : 81106737 kmod has handed .xz and .gz modules for a long time now, and can cope. I was thinking we might also %ghost the .ko, and have a %post install script that un-xz the modules in /proc/modules, but none of them are big enough for that to be worthwhile I think (maybe XFS, but I doubt it.) --Kyle
2014-05-06 17:02:24 +00:00
if [ "%{zipmodules}" -eq "1" ]; then \
enable parallel xz compression of modules So this uses the -P option for xargs to allow parallel compression of xz uaing xargs options, it allows maximum usage of available CPUs it can be reverted to the prior status quo but running the following sed -i 's/global zcpu `nproc --all`/global zcpu 1/' kernel.spec
2019-06-21 21:02:13 +00:00
find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P%{zcpu} xz; \
kernel.spec: xz compress modules on i686 and x86_64 Pretty grody, but it seems to be working... it has to happen after module signing (obviously) and after find-debuginfo.sh runs as well, so tacking it onto the end seems sensible, and then just fixing up the file lists as we go. Provides a nice tidy savings to the disk footprint: kyle@dreadnought:~% for i in kernel-core-3.15.0-0.rc3.git4.1.fc21.x86_64.rpm \ kernel-core-3.15.0-0.rc3.git4.1.fc21.x86_64.rpm.1; do \ rpm -qip $i | grep '^Size'; done Size : 43011603 Size : 81106737 kmod has handed .xz and .gz modules for a long time now, and can cope. I was thinking we might also %ghost the .ko, and have a %post install script that un-xz the modules in /proc/modules, but none of them are big enough for that to be worthwhile I think (maybe XFS, but I doubt it.) --Kyle
2014-05-06 17:02:24 +00:00
fi \
initial srpm import
2010-07-29 23:46:31 +00:00
%{nil}
ensure modules_sign runs even if debuginfo is not produced tested most of the possible with_* options... hopefully i didn't miss anything.
2013-01-08 20:32:03 +00:00
###
### Special hacks for debuginfo subpackages.
###
# This macro is used by %%install, so we must redefine it before that.
%define debug_package %{nil}
%if %{with_debuginfo}
initial srpm import
2010-07-29 23:46:31 +00:00
%ifnarch noarch
%global __debug_package 1
%files -f debugfiles.list debuginfo-common-%{_target_cpu}
%endif
ensure modules_sign runs even if debuginfo is not produced tested most of the possible with_* options... hopefully i didn't miss anything.
2013-01-08 20:32:03 +00:00
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
ensure modules_sign runs even if debuginfo is not produced tested most of the possible with_* options... hopefully i didn't miss anything.
2013-01-08 20:32:03 +00:00
#
# Disgusting hack alert! We need to ensure we sign modules *after* all
# invocations of strip occur, which is in __debug_install_post if
# find-debuginfo.sh runs, and __os_install_post if not.
#
%define __spec_install_post \
%{?__debug_package:%{__debug_install_post}}\
%{__arch_install_post}\
%{__os_install_post}\
%{__modsign_install_post}
initial srpm import
2010-07-29 23:46:31 +00:00
###
### install
###
%install
Build in a fully versioned directory Switch to building in linux-%{KVERREL} so we have a fully versioned directory. This also helps (but doesn't solve) rhbz 751195.
2012-02-22 23:54:17 +00:00
cd linux-%{KVERREL}
initial srpm import
2010-07-29 23:46:31 +00:00
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
# We have to do the headers install before the tools install because the
# kernel headers_install will remove any header files in /usr/include that
# it doesn't install itself.
initial srpm import
2010-07-29 23:46:31 +00:00
%if %{with_headers}
# Install kernel headers
make ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
find $RPM_BUILD_ROOT/usr/include \
\( -name .install -o -name .check -o \
use -delete on find commands where possible rather than forking out to xargs/rm
2018-10-14 09:21:30 +00:00
-name ..install.cmd -o -name ..check.cmd \) -delete
initial srpm import
2010-07-29 23:46:31 +00:00
%endif
Add kernel-cross-headers subpackage The kernel-headers package it primarily used in Fedora to build the toolchain components. This works fine for native builds, but we do not have cross-architecture headers available. That means that the cross compiler toolchains we have can only be built without headers and therefore are only useful for building the kernel. Given that Fedora does not allow cross-compiling of it's packages, that hasn't been a problem to date. However, the toolchains might be used by application developers to build their own software. Providing the ability to build cross toolchains that offer glibc as well may benefit these users. This provides a kernel-cross-headers package that will at least allow this possibility.
2016-02-11 14:57:55 +00:00
%if %{with_cross_headers}
mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers
make ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers headers_install_all
find $RPM_BUILD_ROOT/usr/tmp-headers/include \
\( -name .install -o -name .check -o \
use -delete on find commands where possible rather than forking out to xargs/rm
2018-10-14 09:21:30 +00:00
-name ..install.cmd -o -name ..check.cmd \) -delete
Add kernel-cross-headers subpackage The kernel-headers package it primarily used in Fedora to build the toolchain components. This works fine for native builds, but we do not have cross-architecture headers available. That means that the cross compiler toolchains we have can only be built without headers and therefore are only useful for building the kernel. Given that Fedora does not allow cross-compiling of it's packages, that hasn't been a problem to date. However, the toolchains might be used by application developers to build their own software. Providing the ability to build cross toolchains that offer glibc as well may benefit these users. This provides a kernel-cross-headers package that will at least allow this possibility.
2016-02-11 14:57:55 +00:00
# Copy all the architectures we care about to their respective asm directories
for arch in arm arm64 powerpc s390 x86 ; do
mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
Update install path for asm cross headers
2017-06-09 17:19:56 +00:00
mv $RPM_BUILD_ROOT/usr/tmp-headers/include/arch-${arch}/asm $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
Add kernel-cross-headers subpackage The kernel-headers package it primarily used in Fedora to build the toolchain components. This works fine for native builds, but we do not have cross-architecture headers available. That means that the cross compiler toolchains we have can only be built without headers and therefore are only useful for building the kernel. Given that Fedora does not allow cross-compiling of it's packages, that hasn't been a problem to date. However, the toolchains might be used by application developers to build their own software. Providing the ability to build cross toolchains that offer glibc as well may benefit these users. This provides a kernel-cross-headers package that will at least allow this possibility.
2016-02-11 14:57:55 +00:00
cp -a $RPM_BUILD_ROOT/usr/tmp-headers/include/asm-generic $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/.
done
# Remove the rest of the architectures
rm -rf $RPM_BUILD_ROOT/usr/tmp-headers/include/arch*
rm -rf $RPM_BUILD_ROOT/usr/tmp-headers/include/asm-*
# Copy the rest of the headers over
for arch in arm arm64 powerpc s390 x86 ; do
cp -a $RPM_BUILD_ROOT/usr/tmp-headers/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/.
done
rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
###
### clean
###
###
### scripts
###
#
# This macro defines a %%post script for a kernel*-devel package.
# %%kernel_devel_post [<subpackage>]
#
%define kernel_devel_post() \
%{expand:%%post %{?1:%{1}-}devel}\
if [ -f /etc/sysconfig/kernel ]\
then\
. /etc/sysconfig/kernel || exit $?\
fi\
if [ "$HARDLINK" != "no" -a -x /usr/sbin/hardlink ]\
then\
let flavors/variants end with + in the uname
2013-07-22 20:51:25 +00:00
(cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
initial srpm import
2010-07-29 23:46:31 +00:00
/usr/bin/find . -type f | while read f; do\
hardlink -c /usr/src/kernels/*.fc*.*/$f $f\
done)\
fi\
%{nil}
Create a kernel-modules-extra subpackage This creates a modules-extra subpackage which places a number of less frequently used modules into the extra directory under /lib/modules/`uname -r`/. This reduces the size of the default kernel package while still allowing those modules to be built and installed if needed. We also limit the security exposure by keeping these modules out of the default install.
2011-11-18 13:04:03 +00:00
#
# This macro defines a %%post script for a kernel*-modules-extra package.
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
# It also defines a %%postun script that does the same thing.
Linux v3.11-rc1 - Disable debugging options. - Fix %kernel_modules warning.
2013-07-17 02:56:52 +00:00
# %%kernel_modules_extra_post [<subpackage>]
Create a kernel-modules-extra subpackage This creates a modules-extra subpackage which places a number of less frequently used modules into the extra directory under /lib/modules/`uname -r`/. This reduces the size of the default kernel package while still allowing those modules to be built and installed if needed. We also limit the security exposure by keeping these modules out of the default install.
2011-11-18 13:04:03 +00:00
#
%define kernel_modules_extra_post() \
%{expand:%%post %{?1:%{1}-}modules-extra}\
let flavors/variants end with + in the uname
2013-07-22 20:51:25 +00:00
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%{nil}\
%{expand:%%postun %{?1:%{1}-}modules-extra}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}
#
Rename kernel-drivers to kernel-modules
2014-05-02 01:10:44 +00:00
# This macro defines a %%post script for a kernel*-modules package.
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
# It also defines a %%postun script that does the same thing.
Rename kernel-drivers to kernel-modules
2014-05-02 01:10:44 +00:00
# %%kernel_modules_post [<subpackage>]
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
#
Rename kernel-drivers to kernel-modules
2014-05-02 01:10:44 +00:00
%define kernel_modules_post() \
%{expand:%%post %{?1:%{1}-}modules}\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}\
Rename kernel-drivers to kernel-modules
2014-05-02 01:10:44 +00:00
%{expand:%%postun %{?1:%{1}-}modules}\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
Create a kernel-modules-extra subpackage This creates a modules-extra subpackage which places a number of less frequently used modules into the extra directory under /lib/modules/`uname -r`/. This reduces the size of the default kernel package while still allowing those modules to be built and installed if needed. We also limit the security exposure by keeping these modules out of the default install.
2011-11-18 13:04:03 +00:00
%{nil}
Create the kernel-tools package. WHEE
2011-08-18 01:18:53 +00:00
initial srpm import
2010-07-29 23:46:31 +00:00
# This macro defines a %%posttrans script for a kernel package.
# %%kernel_variant_posttrans [<subpackage>]
# More text can follow to go at the end of this variant's %%post.
#
%define kernel_variant_posttrans() \
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%{expand:%%posttrans %{?1:%{1}-}core}\
kernel.spec: no more files in /boot This patch is to install everything to /lib/modules/$KERNEL_VERSION and only have %ghost files for /boot files. Installation in %posttrans with kernel-install should work already. F20: systemd >= 208-31 F21: systemd >= 216-21 F >= 22: systemd >= 215-12 The main target is to have all rpms install only to /usr, so in the end we would have a self contained installation in /usr. As of now, we still have to cope with /var and /etc, but you have to start somewhere.
2015-05-04 17:22:47 +00:00
/bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
initial srpm import
2010-07-29 23:46:31 +00:00
%{nil}
#
# This macro defines a %%post script for a kernel package and its devel package.
# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
# More text can follow to go at the end of this variant's %%post.
#
%define kernel_variant_post(v:r:) \
%{expand:%%kernel_devel_post %{?-v*}}\
Rename kernel-drivers to kernel-modules
2014-05-02 01:10:44 +00:00
%{expand:%%kernel_modules_post %{?-v*}}\
Create a kernel-modules-extra subpackage This creates a modules-extra subpackage which places a number of less frequently used modules into the extra directory under /lib/modules/`uname -r`/. This reduces the size of the default kernel package while still allowing those modules to be built and installed if needed. We also limit the security exposure by keeping these modules out of the default install.
2011-11-18 13:04:03 +00:00
%{expand:%%kernel_modules_extra_post %{?-v*}}\
initial srpm import
2010-07-29 23:46:31 +00:00
%{expand:%%kernel_variant_posttrans %{?-v*}}\
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%{expand:%%post %{?-v*:%{-v*}-}core}\
initial srpm import
2010-07-29 23:46:31 +00:00
%{-r:\
if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
[ -f /etc/sysconfig/kernel ]; then\
/bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
fi}\
%{nil}
#
# This macro defines a %%preun script for a kernel package.
# %%kernel_variant_preun <subpackage>
#
%define kernel_variant_preun() \
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
%{expand:%%preun %{?1:%{1}-}core}\
kernel.spec: no more files in /boot This patch is to install everything to /lib/modules/$KERNEL_VERSION and only have %ghost files for /boot files. Installation in %posttrans with kernel-install should work already. F20: systemd >= 208-31 F21: systemd >= 216-21 F >= 22: systemd >= 215-12 The main target is to have all rpms install only to /usr, so in the end we would have a self contained installation in /usr. As of now, we still have to cope with /var and /etc, but you have to start somewhere.
2015-05-04 17:22:47 +00:00
/bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\
initial srpm import
2010-07-29 23:46:31 +00:00
%{nil}
%kernel_variant_preun
%kernel_variant_post -r kernel-smp
Put some %if %{with_pae} in a few places This is mostly to quiet a bunch of rpmlint warnings about unexpanded macros for non-existant packages.
2017-11-13 23:10:31 +00:00
%if %{with_pae}
Clean up old PAE code We no longer support i686 PAE. Cleanup some of the cruft that was left behind and de-obfuscate some macros to make it more obvious what's happening.
2019-04-24 22:17:55 +00:00
%kernel_variant_preun lpae
%kernel_variant_post -v lpae -r (kernel|kernel-smp)
Put some %if %{with_pae} in a few places This is mostly to quiet a bunch of rpmlint warnings about unexpanded macros for non-existant packages.
2017-11-13 23:10:31 +00:00
%endif
initial srpm import
2010-07-29 23:46:31 +00:00
%kernel_variant_preun debug
%kernel_variant_post -v debug
if [ -x /sbin/ldconfig ]
then
/sbin/ldconfig -X || exit $?
fi
###
### file lists
###
%if %{with_headers}
%files headers
/usr/include/*
%endif
Add kernel-cross-headers subpackage The kernel-headers package it primarily used in Fedora to build the toolchain components. This works fine for native builds, but we do not have cross-architecture headers available. That means that the cross compiler toolchains we have can only be built without headers and therefore are only useful for building the kernel. Given that Fedora does not allow cross-compiling of it's packages, that hasn't been a problem to date. However, the toolchains might be used by application developers to build their own software. Providing the ability to build cross toolchains that offer glibc as well may benefit these users. This provides a kernel-cross-headers package that will at least allow this possibility.
2016-02-11 14:57:55 +00:00
%if %{with_cross_headers}
%files cross-headers
/usr/*-linux-gnu/include/*
%endif
Split kernel into kernel-core and kernel-drivers subpackages This creates kernel-core and kernel-drivers subpackages. The kernel package remains as a meta-package the requires both of the subpackages. This allows most installs to continue on as-is with upgrades working. The contents of the kernel-core and kernel-drivers subpackages are determined at build time through the filter-modules.sh script. This script "removes" pre-defined subsystems and modules and generates a filelist for the %files section of each subpackage. The contents of each are per-arch, with arch override files taken into account. This allows us to make the split useful for varying arches.
2014-04-01 12:31:48 +00:00
# empty meta-package
%files
rpmlint fluff. kernel.src:386: W: macro-in-comment %nobuildarches kernel.src:432: W: macro-in-comment %post kernel.src:1002: W: macro-in-comment %{vanillaversion} kernel.src:1003: W: macro-in-comment %{kversion} kernel.src:1005: W: macro-in-comment %{kversion} kernel.src:1883: W: macro-in-comment %{image_install_path} (Packagers should avoid using macros in comments, but this is a minor error. The easy fix here is to %% comment out any macros in comments, to prevent unexpected and random behavior.)
2010-10-26 17:43:53 +00:00
# This is %%{image_install_path} on an arch where that includes ELF files,
initial srpm import
2010-07-29 23:46:31 +00:00
# or empty otherwise.
%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
#
# This macro defines the %%files sections for a kernel package
# and its devel and debuginfo packages.
# %%kernel_variant_files [-k vmlinux] <condition> <subpackage>
#
%define kernel_variant_files(k:) \
Enable the vDSO for arm LPAE The vDSO can be used on arm as well. The only supported platforms have LPAE enabled so only enable it there.
2017-05-31 17:42:28 +00:00
%if %{2}\
Drop placeholder ld.so.conf files https://bugzilla.redhat.com/show_bug.cgi?id=1381764
2018-02-28 09:21:21 +00:00
%{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
fix license handling. no build here, it can wait for the next kernel build to be applied
2014-07-12 22:37:40 +00:00
%{!?_licensedir:%global license %%doc}\
Linux v4.16-11490-gb284d4d5a678
2018-04-11 16:12:16 +00:00
%license linux-%{KVERREL}/COPYING-%{version}\
Enable the vDSO for arm LPAE The vDSO can be used on arm as well. The only supported platforms have LPAE enabled so only enable it there.
2017-05-31 17:42:28 +00:00
/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
[arm64] install dtbs
2013-09-03 15:49:09 +00:00
%ifarch %{arm} aarch64\
Enable the vDSO for arm LPAE The vDSO can be used on arm as well. The only supported platforms have LPAE enabled so only enable it there.
2017-05-31 17:42:28 +00:00
/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
Reenable perf on ARM (was suppose to be temporary), Build and package dtbs on ARM
2013-01-27 16:17:49 +00:00
%endif\
Enable the vDSO for arm LPAE The vDSO can be used on arm as well. The only supported platforms have LPAE enabled so only enable it there.
2017-05-31 17:42:28 +00:00
%attr(600,root,root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
%ghost /boot/System.map-%{KVERREL}%{?3:+%{3}}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
%ghost /boot/config-%{KVERREL}%{?3:+%{3}}\
%ghost /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
Own the /lib/modules dir.
2014-01-25 19:00:47 +00:00
%dir /lib/modules\
Enable the vDSO for arm LPAE The vDSO can be used on arm as well. The only supported platforms have LPAE enabled so only enable it there.
2017-05-31 17:42:28 +00:00
%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
Linux v4.16-rc2-62-g79c0ef3e85c0
2018-02-20 16:13:12 +00:00
/lib/modules/%{KVERREL}%{?3:+%{3}}/bls.conf\
Enable the vDSO for arm LPAE The vDSO can be used on arm as well. The only supported platforms have LPAE enabled so only enable it there.
2017-05-31 17:42:28 +00:00
%if %{1}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
initial srpm import
2010-07-29 23:46:31 +00:00
%endif\
Enable the vDSO for arm LPAE The vDSO can be used on arm as well. The only supported platforms have LPAE enabled so only enable it there.
2017-05-31 17:42:28 +00:00
/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\
%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
%{expand:%%files %{?3:%{3}-}devel}\
Linux v4.5-rc6-18-gf983cd3
2016-03-03 18:32:46 +00:00
%defverify(not mtime)\
Enable the vDSO for arm LPAE The vDSO can be used on arm as well. The only supported platforms have LPAE enabled so only enable it there.
2017-05-31 17:42:28 +00:00
/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
%{expand:%%files %{?3:%{3}-}modules-extra}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/extra\
initial srpm import
2010-07-29 23:46:31 +00:00
%if %{with_debuginfo}\
%ifnarch noarch\
Enable the vDSO for arm LPAE The vDSO can be used on arm as well. The only supported platforms have LPAE enabled so only enable it there.
2017-05-31 17:42:28 +00:00
%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
initial srpm import
2010-07-29 23:46:31 +00:00
%endif\
%endif\
Enable the vDSO for arm LPAE The vDSO can be used on arm as well. The only supported platforms have LPAE enabled so only enable it there.
2017-05-31 17:42:28 +00:00
%if %{?3:1} %{!?3:0}\
%{expand:%%files %{3}}\
Add kernel metapackages for all flavors, not just debug
2014-05-01 21:20:09 +00:00
%endif\
initial srpm import
2010-07-29 23:46:31 +00:00
%endif\
%{nil}
Drop placeholder ld.so.conf files https://bugzilla.redhat.com/show_bug.cgi?id=1381764
2018-02-28 09:21:21 +00:00
%kernel_variant_files %{_use_vdso} %{with_up}
%kernel_variant_files %{_use_vdso} %{with_debug} debug
Clean up old PAE code We no longer support i686 PAE. Cleanup some of the cruft that was left behind and de-obfuscate some macros to make it more obvious what's happening.
2019-04-24 22:17:55 +00:00
%kernel_variant_files %{use_vdso} %{with_pae} lpae
initial srpm import
2010-07-29 23:46:31 +00:00
# plz don't put in a version string unless you're going to tag
# and build.
THANKS INFO COW
2013-08-23 14:05:39 +00:00
#
There are a few instances if trailing whitespace throughout the spec. It's not uncommon for editors to yell about this (such as vim with syntastic running rpmlint) and the yelling can be annoying so...
2016-08-05 09:17:33 +00:00
#
initial srpm import
2010-07-29 23:46:31 +00:00
%changelog
Linux v5.3
2019-09-16 12:08:37 +00:00
* Mon Sep 16 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-1
- Linux v5.3
Linux v5.3-rc8
2019-09-10 08:33:40 +00:00
* Tue Sep 10 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc8.git0.1
- Linux v5.3-rc8
Disable debugging options.
2019-09-10 08:24:37 +00:00
* Tue Sep 10 2019 Laura Abbott <labbott@redhat.com>
- Disable debugging options.
Linux v5.3-rc7-2-g3b47fd5ca9ea
2019-09-05 14:53:16 +00:00
* Thu Sep 05 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc7.git1.1
- Linux v5.3-rc7-2-g3b47fd5ca9ea
Reenable debugging options.
2019-09-05 14:51:51 +00:00
* Thu Sep 05 2019 Laura Abbott <labbott@redhat.com>
- Reenable debugging options.
Linux v5.3-rc7
2019-09-03 11:50:53 +00:00
* Tue Sep 03 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc7.git0.1
- Linux v5.3-rc7
Disable debugging options.
2019-09-03 11:46:34 +00:00
* Tue Sep 03 2019 Laura Abbott <labbott@redhat.com>
- Disable debugging options.
Linux v5.3-rc6-119-g9cf6b756cdf2
2019-08-29 13:22:53 +00:00
* Thu Aug 29 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc6.git2.1
- Linux v5.3-rc6-119-g9cf6b756cdf2
Linux v5.3-rc6-115-g9e8312f5e160
2019-08-28 13:03:36 +00:00
* Wed Aug 28 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc6.git1.1
- Linux v5.3-rc6-115-g9e8312f5e160
Reenable debugging options.
2019-08-28 13:00:59 +00:00
* Wed Aug 28 2019 Laura Abbott <labbott@redhat.com>
- Reenable debugging options.
Linux v5.3-rc6
2019-08-26 12:33:15 +00:00
* Mon Aug 26 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc6.git0.1
- Linux v5.3-rc6
Disable debugging options.
2019-08-26 12:08:12 +00:00
* Mon Aug 26 2019 Laura Abbott <labbott@redhat.com>
- Disable debugging options.
Linux v5.3-rc5-224-gdd469a456047
2019-08-23 18:39:29 +00:00
* Fri Aug 23 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc5.git2.1
- Linux v5.3-rc5-224-gdd469a456047
Linux v5.3-rc5-149-gbb7ba8069de9
2019-08-22 14:18:31 +00:00
* Thu Aug 22 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc5.git1.1
- Linux v5.3-rc5-149-gbb7ba8069de9
Reenable debugging options.
2019-08-22 14:05:54 +00:00
* Thu Aug 22 2019 Laura Abbott <labbott@redhat.com>
- Reenable debugging options.
Linux v5.3-rc5
2019-08-19 13:16:12 +00:00
* Mon Aug 19 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc5.git0.1
- Linux v5.3-rc5
Disable debugging options.
2019-08-19 13:08:47 +00:00
* Mon Aug 19 2019 Laura Abbott <labbott@redhat.com>
- Disable debugging options.
Linux v5.3-rc4-71-ga69e90512d9d
2019-08-16 11:56:52 +00:00
* Fri Aug 16 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc4.git3.1
- Linux v5.3-rc4-71-ga69e90512d9d
Linux v5.3-rc4-53-g41de59634046
2019-08-15 11:40:50 +00:00
* Thu Aug 15 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc4.git2.1
- Linux v5.3-rc4-53-g41de59634046
Linux v5.3-rc4-4-gee1c7bd33e66
2019-08-14 15:00:39 +00:00
* Wed Aug 14 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc4.git1.1
- Linux v5.3-rc4-4-gee1c7bd33e66
Reenable debugging options.
2019-08-14 14:58:15 +00:00
* Wed Aug 14 2019 Laura Abbott <labbott@redhat.com>
- Reenable debugging options.
Linux v5.3-rc4
2019-08-13 12:06:45 +00:00
* Tue Aug 13 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc4.git0.1
- Linux v5.3-rc4
Disable debugging options.
2019-08-13 12:02:48 +00:00
* Tue Aug 13 2019 Laura Abbott <labbott@redhat.com>
- Disable debugging options.
Linux v5.3-rc3-282-g33920f1ec5bf
2019-08-07 10:21:01 +00:00
* Wed Aug 07 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc3.git1.1
- Linux v5.3-rc3-282-g33920f1ec5bf
Reenable debugging options.
2019-08-07 10:18:47 +00:00
* Wed Aug 07 2019 Laura Abbott <labbott@redhat.com>
- Reenable debugging options.
Linux v5.3-rc3
2019-08-05 14:46:27 +00:00
* Mon Aug 05 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc3.git0.1
- Linux v5.3-rc3
Disable debugging options.
2019-08-05 14:40:45 +00:00
* Mon Aug 05 2019 Laura Abbott <labbott@redhat.com>
- Disable debugging options.
Linux v5.3-rc2-70-g1e78030e5e5b
2019-08-02 13:05:36 +00:00
* Fri Aug 02 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc2.git4.1
- Linux v5.3-rc2-70-g1e78030e5e5b
Linux v5.3-rc2-60-g5c6207539aea Enable 8250 serial ports
2019-08-01 11:46:22 +00:00
* Thu Aug 01 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc2.git3.1
- Linux v5.3-rc2-60-g5c6207539aea
- Enable 8250 serial ports on powerpc
Enable IMA Appraisal - related rhbz 790008 1554474
2019-07-31 12:58:31 +00:00
* Wed Jul 31 2019 Peter Robinson <pbrobinson@fedoraproject.org> 5.3.0-0.rc2.git2.2
- Enable IMA Appraisal
Linux v5.3-rc2-51-g4010b622f1d2
2019-07-31 11:53:47 +00:00
* Wed Jul 31 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc2.git2.1
- Linux v5.3-rc2-51-g4010b622f1d2
Linux v5.3-rc2-11-g2a11c76e5301
2019-07-30 12:31:02 +00:00
* Tue Jul 30 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc2.git1.1
- Linux v5.3-rc2-11-g2a11c76e5301
Reenable debugging options.
2019-07-30 12:28:16 +00:00
* Tue Jul 30 2019 Laura Abbott <labbott@redhat.com>
- Reenable debugging options.
Linux v5.3-rc2
2019-07-29 11:40:19 +00:00
* Mon Jul 29 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc2.git0.1
- Linux v5.3-rc2
Disable debugging options.
2019-07-29 11:28:10 +00:00
* Mon Jul 29 2019 Laura Abbott <labbott@redhat.com>
- Disable debugging options.
Linux v5.3-rc1-96-g6789f873ed37
2019-07-26 11:55:34 +00:00
* Fri Jul 26 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc1.git4.1
- Linux v5.3-rc1-96-g6789f873ed37
- Enable nvram driver (rhbz 1732612)
Linux v5.3-rc1-82-gbed38c3e2dca
2019-07-25 11:46:05 +00:00
* Thu Jul 25 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc1.git3.1
- Linux v5.3-rc1-82-gbed38c3e2dca
Linux v5.3-rc1-59-gad5e427e0f6b
2019-07-24 11:48:09 +00:00
* Wed Jul 24 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc1.git2.1
- Linux v5.3-rc1-59-gad5e427e0f6b
Linux v5.3-rc1-56-g7b5cf701ea9c
2019-07-23 12:40:35 +00:00
* Tue Jul 23 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc1.git1.1
- Linux v5.3-rc1-56-g7b5cf701ea9c
Reenable debugging options.
2019-07-23 12:37:08 +00:00
* Tue Jul 23 2019 Laura Abbott <labbott@redhat.com>
- Reenable debugging options.
Linux v5.3-rc1
2019-07-21 21:53:59 +00:00
* Sun Jul 21 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc1.git0.1
- Linux v5.3-rc1
Disable debugging options.
2019-07-21 21:42:12 +00:00
* Sun Jul 21 2019 Laura Abbott <labbott@redhat.com>
- Disable debugging options.
Bug 1576593 - work around while vendor investigates arm builder LPAE HW issue
2019-07-19 17:51:33 +00:00
* Fri Jul 19 2019 Peter Robinson <pbrobinson@fedoraproject.org>
- RHBZ Bug 1576593 - work around while vendor investigates
Linux v5.2-11564-g22051d9c4a57
2019-07-18 16:08:47 +00:00
* Thu Jul 18 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc0.git7.1
- Linux v5.2-11564-g22051d9c4a57
Linux v5.2-11043-g0a8ad0ffa4d8
2019-07-17 12:17:47 +00:00
* Wed Jul 17 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc0.git6.1
- Linux v5.2-11043-g0a8ad0ffa4d8
Pick up the iwlwifi firmware crash fix (rhbz 1716334) Some folks have been asking for this to be in Rawhide in addition to the stable kernels.
2019-07-08 19:54:11 +00:00
* Tue Jul 16 2019 Jeremy Cline <jcline@redhat.com>
- Fix a firmware crash in Intel 7000 and 8000 devices (rhbz 1716334)
Linux v5.2-10808-g9637d517347e
2019-07-16 12:59:21 +00:00
* Tue Jul 16 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc0.git5.1
- Linux v5.2-10808-g9637d517347e
Turn off i686 builds for Rawhide
2019-07-12 19:43:02 +00:00
* Fri Jul 12 2019 Justin M. Forbes <jforbes@fedoraproject.org>
- Turn off i686 builds
Linux v5.2-7109-gd7d170a8e357
2019-07-12 12:29:07 +00:00
* Fri Jul 12 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc0.git4.1
- Linux v5.2-7109-gd7d170a8e357
Linux v5.2-3311-g5450e8a316a6
2019-07-11 11:45:34 +00:00
* Thu Jul 11 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc0.git3.1
- Linux v5.2-3311-g5450e8a316a6
Linux v5.2-3135-ge9a83bd23220
2019-07-10 12:28:38 +00:00
* Wed Jul 10 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc0.git2.1
- Linux v5.2-3135-ge9a83bd23220
Linux v5.2-915-g5ad18b2e60b7
2019-07-09 13:24:38 +00:00
* Tue Jul 09 2019 Laura Abbott <labbott@redhat.com> - 5.3.0-0.rc0.git1.1
- Linux v5.2-915-g5ad18b2e60b7
Reenable debugging options.
2019-07-09 12:32:37 +00:00
* Tue Jul 09 2019 Laura Abbott <labbott@redhat.com>
- Reenable debugging options.
Linux v5.2.0
2019-07-08 14:49:35 +00:00
* Mon Jul 08 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-1
- Linux v5.2.0
- Disable debugging options.
Linux v5.2-rc7-8-geca94432934f
2019-07-03 14:30:49 +00:00
* Wed Jul 03 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc7.git1.1
- Linux v5.2-rc7-8-geca94432934f
- Reenable debugging options.
Linux v5.2-rc7
2019-07-01 13:53:17 +00:00
* Mon Jul 01 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc7.git0.1
- Linux v5.2-rc7
Disable debugging options.
2019-07-01 13:46:31 +00:00
* Mon Jul 01 2019 Justin M. Forbes <jforbes@fedoraproject.org>
- Disable debugging options.
Linux v5.2-rc6-93-g556e2f6020bf
2019-06-28 14:20:53 +00:00
* Fri Jun 28 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc6.git2.1
- Linux v5.2-rc6-93-g556e2f6020bf
Linux v5.2-rc6-15-g249155c20f9b
2019-06-25 14:39:54 +00:00
* Tue Jun 25 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc6.git1.1
- Linux v5.2-rc6-15-g249155c20f9b
- Reenable debugging options.
Linux v5.2-rc6
2019-06-24 15:41:57 +00:00
* Mon Jun 24 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc6.git0.1
- Linux v5.2-rc6
Disable debugging options.
2019-06-24 15:23:42 +00:00
* Mon Jun 24 2019 Justin M. Forbes <jforbes@fedoraproject.org>
- Disable debugging options.
QCom ACPI fixes
2019-06-22 09:56:20 +00:00
* Sat Jun 22 2019 Peter Robinson <pbrobinson@fedoraproject.org>
- QCom ACPI fixes
Linux v5.2-rc5-290-g4ae004a9bca8
2019-06-21 17:42:02 +00:00
* Fri Jun 21 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc5.git4.1
- Linux v5.2-rc5-290-g4ae004a9bca8
Linux v5.2-rc5-239-g241e39004581
2019-06-20 16:26:13 +00:00
* Thu Jun 20 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc5.git3.1
- Linux v5.2-rc5-239-g241e39004581
Linux v5.2-rc5-224-gbed3c0d84e7e
2019-06-19 14:34:45 +00:00
* Wed Jun 19 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc5.git2.1
- Linux v5.2-rc5-224-gbed3c0d84e7e
Linux v5.2-rc5-177-g29f785ff76b6
2019-06-18 18:37:45 +00:00
* Tue Jun 18 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc5.git1.1
- Linux v5.2-rc5-177-g29f785ff76b6
- Reenable debugging options.
Linux v5.2-rc5
2019-06-17 14:02:12 +00:00
* Mon Jun 17 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc5.git0.1
- Linux v5.2-rc5
Disable debugging options.
2019-06-17 13:45:30 +00:00
* Mon Jun 17 2019 Justin M. Forbes <jforbes@fedoraproject.org>
- Disable debugging options.
Linux v5.2-rc4-129-g72a20cee5d99
2019-06-14 17:11:12 +00:00
* Fri Jun 14 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc4.git3.1
- Linux v5.2-rc4-129-g72a20cee5d99
Revert the Bluetooth encryption key patch Upstream stable reverted it, although the revert isn't in Torvald's tree yet.
2019-06-14 13:45:30 +00:00
* Fri Jun 14 2019 Jeremy Cline <jcline@redhat.com>
- Fix the long-standing bluetooth breakage
Fix the LCD panel an Asus EeePC 1025C not lighting up (rhbz#1697069) Add small bugfix for new Logitech wireless keyboard support
2019-06-14 09:59:03 +00:00
* Fri Jun 14 2019 Hans de Goede <hdegoede@redhat.com>
- Fix the LCD panel an Asus EeePC 1025C not lighting up (rhbz#1697069)
- Add small bugfix for new Logitech wireless keyboard support
Linux v5.2-rc4-45-gc11fb13a117e
2019-06-13 18:09:01 +00:00
* Thu Jun 13 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc4.git2.1
- Linux v5.2-rc4-45-gc11fb13a117e
Raspberry Pi: move to cpufreq driver accepted for upstream \o/
2019-06-13 09:49:31 +00:00
* Wed Jun 12 2019 Peter Robinson <pbrobinson@fedoraproject.org>
- Raspberry Pi: move to cpufreq driver accepted for upstream \o/
Linux v5.2-rc4-20-gaa7235483a83
2019-06-12 15:39:00 +00:00
* Wed Jun 12 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc4.git1.1
- Linux v5.2-rc4-20-gaa7235483a83
- Reenable debugging options.
Linux v5.2-rc4
2019-06-10 14:25:17 +00:00
* Mon Jun 10 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc4.git0.1
- Linux v5.2-rc4
Disable debugging options.
2019-06-10 14:02:42 +00:00
* Mon Jun 10 2019 Justin M. Forbes <jforbes@fedoraproject.org>
- Disable debugging options.
Linux v5.2-rc3-77-g16d72dd4891f
2019-06-07 17:02:07 +00:00
* Fri Jun 07 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc3.git3.1
- Linux v5.2-rc3-77-g16d72dd4891f
Fix rbhz 1658675 again This patch got dropped with the latest rebase to upstream's version of the lockdown patches.
2019-06-06 18:12:27 +00:00
* Thu Jun 06 2019 Jeremy Cline <jcline@redhat.com>
- Fix incorrect permission denied with lock down off (rhbz 1658675)
Linux v5.2-rc3-37-g156c05917e09
2019-06-06 16:22:11 +00:00
* Thu Jun 06 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc3.git2.1
- Linux v5.2-rc3-37-g156c05917e09
Linux v5.2-rc3-24-g788a024921c4
2019-06-04 16:15:33 +00:00
* Tue Jun 04 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc3.git1.1
- Linux v5.2-rc3-24-g788a024921c4
- Reenable debugging options.
Linux v5.2-rc3
2019-06-03 13:04:13 +00:00
* Mon Jun 03 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc3.git0.1
- Linux v5.2-rc3
Disable debugging options.
2019-06-03 12:53:09 +00:00
* Mon Jun 03 2019 Justin M. Forbes <jforbes@fedoraproject.org>
- Disable debugging options.
Bump for ARMv7 fix
2019-05-31 18:55:08 +00:00
* Fri May 31 2019 Peter Robinson <pbrobinson@fedoraproject.org> 5.2.0-0.rc2.git1.2
- Bump for ARMv7 fix
Linux v5.2-rc2-24-gbec7550cca10
2019-05-30 16:03:19 +00:00
* Thu May 30 2019 Justin M. Forbes <jforbes@redhat.com> - 5.2.0-0.rc2.git1.1
- Linux v5.2-rc2-24-gbec7550cca10
- Reenable debugging options.
Linux v5.2-rc2
2019-05-27 15:56:09 +00:00
* Mon May 27 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc2.git0.1
- Linux v5.2-rc2
Disable debugging options.
2019-05-27 15:52:24 +00:00
* Mon May 27 2019 Justin M. Forbes <jforbes@fedoraproject.org>
- Disable debugging options.
Linux v5.2-rc1-233-g0a72ef899014
2019-05-24 20:18:07 +00:00
* Fri May 24 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc1.git3.1
- Linux v5.2-rc1-233-g0a72ef899014
Linux v5.2-rc1-165-g54dee406374c
2019-05-22 17:15:16 +00:00
* Wed May 22 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc1.git2.1
- Linux v5.2-rc1-165-g54dee406374c
Linux v5.2-rc1-129-g9c7db5004280
2019-05-21 20:28:44 +00:00
* Tue May 21 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc1.git1.1
- Linux v5.2-rc1-129-g9c7db5004280
* Tue May 21 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc1.git0.2
- Reenable debugging options.
Linux v5.2-rc1
2019-05-20 19:08:36 +00:00
* Mon May 20 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc1.git0.1
- Disable debugging options.
- Linux V5.2-rc1
Arm config updates for 5.2rc1
2019-05-20 07:47:57 +00:00
* Sun May 19 2019 Peter Robinson <pbrobinson@fedoraproject.org>
- Arm config updates
Linux v5.1-12505-g0ef0fd351550
2019-05-17 20:53:20 +00:00
* Fri May 17 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc0.git9.1
- Linux v5.1-12505-g0ef0fd351550
Linux v5.1-12065-g8c05f3b965da
2019-05-16 20:35:54 +00:00
* Thu May 16 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc0.git8.1
- Linux v5.1-12065-g8c05f3b965da
Linux v5.1-10909-g2bbacd1a9278
2019-05-15 19:14:21 +00:00
* Wed May 15 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc0.git7.1
- Linux v5.1-10909-g2bbacd1a9278
Linux v5.1-10326-g7e9890a3500d
2019-05-14 17:16:53 +00:00
* Tue May 14 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc0.git6.1
- Linux v5.1-10326-g7e9890a3500d
Linux v5.1-10135-ga13f0655503a
2019-05-13 17:05:41 +00:00
* Mon May 13 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc0.git5.1
- Linux v5.1-10135-ga13f0655503a
Linux v5.1-9573-gb970afcfcabd
2019-05-10 18:37:00 +00:00
* Fri May 10 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc0.git4.1
- Linux v5.1-9573-gb970afcfcabd
Linux v5.1-8122-ga2d635decbfa
2019-05-09 18:02:16 +00:00
* Thu May 09 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc0.git3.1
- Linux v5.1-8122-ga2d635decbfa
Linux v5.1-5445-g80f232121b69
2019-05-08 17:24:46 +00:00
* Wed May 08 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc0.git2.1
- Linux v5.1-5445-g80f232121b69
Linux v5.1-1199-g71ae5fc87c34
2019-05-07 17:04:31 +00:00
* Tue May 07 2019 Justin M. Forbes <jforbes@fedoraproject.org> - 5.2.0-0.rc0.git1.1
- Linux v5.1-1199-g71ae5fc87c34
- Reenable debugging options.
Enable Arm STM32MP1
2019-05-07 03:58:17 +00:00
* Mon May 6 2019 Peter Robinson <pbrobinson@fedoraproject.org>
- Enable Arm STM32MP1
Linux v5.1.0
2019-05-06 14:05:18 +00:00
* Mon May 06 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-1
- Linux v5.1
Linux v5.1-rc7-131-gea9866793d1e
2019-05-03 14:53:48 +00:00
* Fri May 03 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc7.git4.1
- Linux v5.1-rc7-131-gea9866793d1e
Linux v5.1-rc7-29-g600d7258316d
2019-05-02 14:44:19 +00:00
* Thu May 02 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc7.git3.1
- Linux v5.1-rc7-29-g600d7258316d
Linux v5.1-rc7-16-gf2bc9c908dfe
2019-05-01 14:02:59 +00:00
* Wed May 01 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc7.git2.1
- Linux v5.1-rc7-16-gf2bc9c908dfe
Linux v5.1-rc7-5-g83a50840e72a
2019-04-30 16:04:29 +00:00
* Tue Apr 30 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc7.git1.1
- Linux v5.1-rc7-5-g83a50840e72a
Reenable debugging options.
2019-04-30 16:02:26 +00:00
* Tue Apr 30 2019 Jeremy Cline <jcline@redhat.com>
- Reenable debugging options.
Fix wifi on various ideapad models not working (rhbz#1703338)
2019-04-30 09:50:07 +00:00
* Tue Apr 30 2019 Hans de Goede <hdegoede@redhat.com>
- Fix wifi on various ideapad models not working (rhbz#1703338)
Linux v5.1-rc7
2019-04-29 14:36:39 +00:00
* Mon Apr 29 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc7.git0.1
- Linux v5.1-rc7
Disable debugging options.
2019-04-29 14:35:33 +00:00
* Mon Apr 29 2019 Jeremy Cline <jcline@redhat.com>
- Disable debugging options.
Linux v5.1-rc6-72-g8113a85f8720
2019-04-26 14:37:24 +00:00
* Fri Apr 26 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc6.git4.1
- Linux v5.1-rc6-72-g8113a85f8720
Linux v5.1-rc6-64-gcd8dead0c394
2019-04-25 14:15:39 +00:00
* Thu Apr 25 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc6.git3.1
- Linux v5.1-rc6-64-gcd8dead0c394
Fix CVE-2019-3900 (rhbz 1698757 1702940)
2019-04-25 12:23:14 +00:00
* Thu Apr 25 2019 Justin M. Forbes <jforbes@fedoraproject.org>
- Fix CVE-2019-3900 (rhbz 1698757 1702940)
Linux v5.1-rc6-15-gba25b50d582f
2019-04-24 14:34:24 +00:00
* Wed Apr 24 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc6.git2.1
- Linux v5.1-rc6-15-gba25b50d582f
Linux v5.1-rc6-4-g7142eaa58b49
2019-04-23 14:32:58 +00:00
* Tue Apr 23 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc6.git1.1
- Linux v5.1-rc6-4-g7142eaa58b49
Reenable debugging options.
2019-04-23 14:30:39 +00:00
* Tue Apr 23 2019 Jeremy Cline <jcline@redhat.com>
- Reenable debugging options.
Check module signatures with the platform keyring (if enabled) Upstream has made a keyring to the platform keys. The "KEYS: Allow unrestricted boot-time addition of keys to secondary keyring" is available upstream for the platform keyring. The only issue is that module signatures aren't checked with the platform keyring, so this introduces a patch to add that which has been sent upstream. At least our carried-patch count hasn't gone up.
2019-04-23 14:21:09 +00:00
* Tue Apr 23 2019 Jeremy Cline <jcline@redhat.com>
- Allow modules signed by keys in the platform keyring (rbhz 1701096)
Linux v5.1-rc6
2019-04-22 14:20:15 +00:00
* Mon Apr 22 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc6.git0.1
- Linux v5.1-rc6
Disable debugging options.
2019-04-22 14:04:58 +00:00
* Mon Apr 22 2019 Jeremy Cline <jcline@redhat.com>
- Disable debugging options.
Linux v5.1-rc5-36-g444fe9913539
2019-04-17 14:56:18 +00:00
* Wed Apr 17 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc5.git2.1
- Linux v5.1-rc5-36-g444fe9913539
Linux v5.1-rc5-10-g618d919cae2f
2019-04-16 16:53:46 +00:00
* Tue Apr 16 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc5.git1.1
- Linux v5.1-rc5-10-g618d919cae2f
Reenable debugging options.
2019-04-16 14:23:06 +00:00
* Tue Apr 16 2019 Jeremy Cline <jcline@redhat.com>
- Reenable debugging options.
Linux v5.1-rc5
2019-04-15 14:23:09 +00:00
* Mon Apr 15 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc5.git0.1
- Linux v5.1-rc5
* Mon Apr 15 2019 Jeremy Cline <jcline@redhat.com>
- Disable debugging options.
Linux v5.1-rc4-184-g8ee15f324866
2019-04-12 16:56:48 +00:00
* Fri Apr 12 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc4.git4.1
- Linux v5.1-rc4-184-g8ee15f324866
Linux v5.1-rc4-58-g582549e3fbe1
2019-04-11 13:57:07 +00:00
* Thu Apr 11 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc4.git3.1
- Linux v5.1-rc4-58-g582549e3fbe1
Linux v5.1-rc4-43-g771acc7e4a6e
2019-04-10 14:14:36 +00:00
* Wed Apr 10 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc4.git2.1
- Linux v5.1-rc4-43-g771acc7e4a6e
Linux v5.1-rc4-34-g869e3305f23d
2019-04-09 15:13:32 +00:00
* Tue Apr 09 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc4.git1.1
- Linux v5.1-rc4-34-g869e3305f23d
Reenable debugging options.
2019-04-09 15:10:12 +00:00
* Tue Apr 09 2019 Jeremy Cline <jcline@redhat.com>
- Reenable debugging options.
Linux v5.1-rc4
2019-04-08 16:58:32 +00:00
* Mon Apr 08 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc4.git0.1
- Linux v5.1-rc4
* Mon Apr 08 2019 Jeremy Cline <jcline@redhat.com>
- Disable debugging options.
Linux v5.1-rc3-206-gea2cec24c8d4
2019-04-05 14:40:37 +00:00
* Fri Apr 05 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc3.git3.1
- Linux v5.1-rc3-206-gea2cec24c8d4
Linux v5.1-rc3-35-g8ed86627f715
2019-04-03 17:49:51 +00:00
* Wed Apr 03 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc3.git2.1
- Linux v5.1-rc3-35-g8ed86627f715
Linux v5.1-rc3-14-g5e7a8ca31926
2019-04-02 19:37:04 +00:00
* Tue Apr 02 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc3.git1.1
- Linux v5.1-rc3-14-g5e7a8ca31926
Reenable debugging options.
2019-04-02 18:58:17 +00:00
* Tue Apr 02 2019 Jeremy Cline <jcline@redhat.com>
- Reenable debugging options.
Linux v5.1-rc3
2019-04-01 15:40:43 +00:00
* Mon Apr 01 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc3.git0.1
- Linux v5.1-rc3
Disable debugging options.
2019-04-01 15:29:49 +00:00
* Mon Apr 01 2019 Jeremy Cline <jcline@redhat.com>
- Disable debugging options.
Linux v5.1-rc2-247-g9936328b41ce
2019-03-29 19:43:21 +00:00
* Fri Mar 29 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc2.git4.1
- Linux v5.1-rc2-247-g9936328b41ce
- Pick up a mm fix causing hangs (rhbz 1693525)
Linux v5.1-rc2-243-g8c7ae38d1ce1
2019-03-28 20:06:43 +00:00
* Thu Mar 28 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc2.git3.1
- Linux v5.1-rc2-243-g8c7ae38d1ce1
Linux v5.1-rc2-24-g14c741de9386
2019-03-27 18:04:20 +00:00
* Wed Mar 27 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc2.git2.1
- Linux v5.1-rc2-24-g14c741de9386
Align the IPv4 netfilter configs with the IPv6 configs (rhbz 1672657) IPv6 builds as a module, change IPv4 to be built as a module as well.
2019-03-27 16:18:16 +00:00
* Wed Mar 27 2019 Jeremy Cline <jeremy@jcline.org>
- Build iptable_filter as module
Linux v5.1-rc2-16-g65ae689329c5
2019-03-26 19:06:04 +00:00
* Tue Mar 26 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc2.git1.1
- Linux v5.1-rc2-16-g65ae689329c5
Reenable debugging options.
2019-03-26 19:04:06 +00:00
* Tue Mar 26 2019 Jeremy Cline <jcline@redhat.com>
- Reenable debugging options.
Initial NXP i.MX8 enablement
2019-03-26 14:31:32 +00:00
* Tue Mar 26 2019 Peter Robinson <pbrobinson@fedoraproject.org>
- Initial NXP i.MX8 enablement
Linux v5.1-rc2
2019-03-25 14:51:10 +00:00
* Mon Mar 25 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc2.git0.1
- Linux v5.1-rc2
Disable debugging options.
2019-03-25 14:30:45 +00:00
* Mon Mar 25 2019 Jeremy Cline <jcline@redhat.com>
- Disable debugging options.
Fixes for Tegra Jetson TX series, Initial support for NVIDIA Jetson Nano
2019-03-24 17:16:09 +00:00
* Sat Mar 23 2019 Peter Robinson <pbrobinson@fedoraproject.org>
- Fixes for Tegra Jetson TX series
- Initial support for NVIDIA Jetson Nano
Linux v5.1-rc1-66-gfd1f297b794c
2019-03-22 14:14:08 +00:00
* Fri Mar 22 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc1.git2.1
- Linux v5.1-rc1-66-gfd1f297b794c
Linux v5.1-rc1-15-gbabf09c3837f
2019-03-20 14:19:12 +00:00
* Wed Mar 20 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc1.git1.1
- Linux v5.1-rc1-15-gbabf09c3837f
- Reenable debugging options.
Make the mainline vboxguest drv feature set match VirtualBox 6.0.x (#1689750)
2019-03-20 12:02:44 +00:00
* Wed Mar 20 2019 Hans de Goede <hdegoede@redhat.com>
- Make the mainline vboxguest drv feature set match VirtualBox 6.0.x (#1689750)
Linux v5.1-rc1
2019-03-18 14:46:16 +00:00
* Mon Mar 18 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc1.git0.1
- Linux v5.1-rc1
Disable debugging options.
2019-03-18 14:10:29 +00:00
* Mon Mar 18 2019 Jeremy Cline <jcline@redhat.com>
- Disable debugging options.
updates for Arm
2019-03-18 00:48:44 +00:00
* Sun Mar 17 2019 Peter Robinson <pbrobinson@fedoraproject.org>
- Updates for Arm
Linux v5.0-11520-gf261c4e529da
2019-03-15 14:48:09 +00:00
* Fri Mar 15 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc0.git9.1
- Linux v5.0-11520-gf261c4e529da
Linux v5.0-11139-gfa3d493f7a57
2019-03-14 16:55:27 +00:00
* Thu Mar 14 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc0.git8.1
- Linux v5.0-11139-gfa3d493f7a57
Linux v5.0-11053-gebc551f2b8f9
2019-03-13 15:02:12 +00:00
* Wed Mar 13 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc0.git7.1
- Linux v5.0-11053-gebc551f2b8f9
Linux v5.0-10742-gea295481b6e3
2019-03-12 14:57:08 +00:00
* Tue Mar 12 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc0.git6.1
- Linux v5.0-10742-gea295481b6e3
Arm config updates and fixes, fixes for Jetson TX series
2019-03-12 11:50:12 +00:00
* Tue Mar 12 2019 Peter Robinson <pbrobinson@fedoraproject.org>
- Arm config updates and fixes
Linux v5.0-10360-g12ad143e1b80
2019-03-11 14:56:28 +00:00
* Mon Mar 11 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc0.git5.1
- Linux v5.0-10360-g12ad143e1b80
Linux v5.0-7001-g610cd4eadec4
2019-03-08 16:38:03 +00:00
* Fri Mar 08 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc0.git4.1
- Linux v5.0-7001-g610cd4eadec4
Linux v5.0-6399-gf90d64483ebd
2019-03-07 16:46:28 +00:00
* Thu Mar 07 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc0.git3.1
- Linux v5.0-6399-gf90d64483ebd
Linux v5.0-3452-g3717f613f48d
2019-03-06 14:54:04 +00:00
* Wed Mar 06 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc0.git2.1
- Linux v5.0-3452-g3717f613f48d
Linux v5.0-510-gcd2a3bf02625
2019-03-05 14:47:54 +00:00
* Tue Mar 05 2019 Jeremy Cline <jcline@redhat.com> - 5.1.0-0.rc0.git1.1
- Linux v5.0-510-gcd2a3bf02625
Reenable debugging options.
2019-03-05 14:36:29 +00:00
* Tue Mar 05 2019 Jeremy Cline <jcline@redhat.com>
- Reenable debugging options.
Linux v5.0.0
2019-03-04 15:13:09 +00:00
* Mon Mar 04 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-1
- Linux v5.0.0
Linux v5.0-rc8-3-g7d762d69145a
2019-02-26 17:00:23 +00:00
* Tue Feb 26 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-0.rc8.git1.1
- Linux v5.0-rc8-3-g7d762d69145a
Reenable debugging options.
2019-02-26 16:57:36 +00:00
* Tue Feb 26 2019 Laura Abbott <labbott@redhat.com>
- Reenable debugging options.
Linux v5.0-rc8
2019-02-25 16:55:57 +00:00
* Mon Feb 25 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-0.rc8.git0.1
- Linux v5.0-rc8
- Disable debugging options.
Linux v5.0-rc7-118-g8a61716ff2ab
2019-02-22 17:41:13 +00:00
* Fri Feb 22 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-0.rc7.git3.1
- Linux v5.0-rc7-118-g8a61716ff2ab
Improvements to 96boards Rock960
2019-02-21 11:41:43 +00:00
* Wed Feb 20 2019 Peter Robinson <pbrobinson@fedoraproject.org>
- Improvements to 96boards Rock960
Linux v5.0-rc7-85-g2137397c92ae
2019-02-20 18:55:54 +00:00
* Wed Feb 20 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-0.rc7.git2.1
- Linux v5.0-rc7-85-g2137397c92ae
Linux v5.0-rc7-11-gb5372fe5dc84
2019-02-19 17:07:58 +00:00
* Tue Feb 19 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-0.rc7.git1.1
- Linux v5.0-rc7-11-gb5372fe5dc84
Reenable debugging options.
2019-02-19 17:03:46 +00:00
* Tue Feb 19 2019 Laura Abbott <labbott@redhat.com>
- Reenable debugging options.
Linux v5.0-rc7
2019-02-18 04:10:39 +00:00
* Mon Feb 18 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-0.rc7.git0.1
- Linux v5.0-rc7
- Disable debugging options.
Linux v5.0-rc6-42-g1f947a7a011f
2019-02-13 15:46:36 +00:00
* Wed Feb 13 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-0.rc6.git1.1
- Linux v5.0-rc6-42-g1f947a7a011f
Reenable debugging options.
2019-02-13 15:12:30 +00:00
* Wed Feb 13 2019 Laura Abbott <labbott@redhat.com>
- Reenable debugging options.
Reenable debugging options.
2019-02-13 15:43:20 +00:00
* Wed Feb 13 2019 Laura Abbott <labbott@redhat.com>
- Reenable debugging options.
Enable NXP Freescale Layerscape platform
2019-02-13 09:13:14 +00:00
* Wed Feb 13 2019 Peter Robinson <pbrobinson@fedoraproject.org>
- Enable NXP Freescale Layerscape platform
Linux v5.0-rc6 Tweaks to gcc9 fixes
2019-02-11 14:16:56 +00:00
* Mon Feb 11 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-0.rc6.git0.1
- Linux v5.0-rc6
- Disable debugging options.
- Tweaks to gcc9 fixes
* Mon Feb 04 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-0.rc5.git0.1
- Linux v5.0-rc5
- Disable debugging options.
Linux v5.0-rc4-106-g5b4746a03199
2019-02-01 08:41:39 +00:00
* Fri Feb 01 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-0.rc4.git3.1
- Linux v5.0-rc4-106-g5b4746a03199
Add patches from -next to enable i915.fastboot by default on Skylake+ for https://fedoraproject.org/wiki/Changes/FlickerFreeBoot
2019-01-31 09:15:07 +00:00
* Thu Jan 31 2019 Hans de Goede <hdegoede@redhat.com>
- Add patches from -next to enable i915.fastboot by default on Skylake+ for
https://fedoraproject.org/wiki/Changes/FlickerFreeBoot
Linux v5.0-rc4-59-g62967898789d
2019-01-30 15:26:48 +00:00
* Wed Jan 30 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-0.rc4.git2.1
- Linux v5.0-rc4-59-g62967898789d
Linux v5.0-rc4-1-g4aa9fc2a435a
2019-01-29 07:32:15 +00:00
* Tue Jan 29 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-0.rc4.git1.1
- Linux v5.0-rc4-1-g4aa9fc2a435a
Reenable debugging options.
2019-01-29 07:24:50 +00:00
* Tue Jan 29 2019 Laura Abbott <labbott@redhat.com>
- Reenable debugging options.
Linux v5.0-rc4
2019-01-28 06:31:12 +00:00
* Mon Jan 28 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-0.rc4.git0.1
- Linux v5.0-rc4
- Disable debugging options.
Linux v5.0-rc3-53-g333478a7eb21
2019-01-23 08:26:28 +00:00
* Wed Jan 23 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-0.rc3.git1.1
- Linux v5.0-rc3-53-g333478a7eb21
Reenable debugging options.
2019-01-23 08:21:59 +00:00
* Wed Jan 23 2019 Laura Abbott <labbott@redhat.com>
- Reenable debugging options.
Linux v5.0-rc3
2019-01-21 00:58:06 +00:00
* Mon Jan 21 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-0.rc3.git0.1
- Linux v5.0-rc3
- Disable debugging options.
Linux v5.0-rc2-211-gd7393226d15a
2019-01-18 17:08:28 +00:00
* Fri Jan 18 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-0.rc2.git4.1
- Linux v5.0-rc2-211-gd7393226d15a
Linux v5.0-rc2-145-g7fbfee7c80de
2019-01-17 14:29:27 +00:00
* Thu Jan 17 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-0.rc2.git3.1
- Linux v5.0-rc2-145-g7fbfee7c80de
Linux v5.0-rc2-141-g47bfa6d9dc8c
2019-01-16 15:21:41 +00:00
* Wed Jan 16 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-0.rc2.git2.1
- Linux v5.0-rc2-141-g47bfa6d9dc8c
Linux v5.0-rc2-36-gfe76fc6aaf53
2019-01-15 16:45:26 +00:00
* Tue Jan 15 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-0.rc2.git1.1
- Linux v5.0-rc2-36-gfe76fc6aaf53
Reenable debugging options.
2019-01-15 16:43:22 +00:00
* Tue Jan 15 2019 Laura Abbott <labbott@redhat.com>
- Reenable debugging options.
Enable CONFIG_GPIO_LEDS and CONFIG_GPIO_PCA953X (rhbz 1601623)
2019-01-14 21:59:58 +00:00
* Mon Jan 14 2019 Laura Abbott <labbott@redhat.com>
- Enable CONFIG_GPIO_LEDS and CONFIG_GPIO_PCA953X (rhbz 1601623)
Linux v5.0-rc2
2019-01-14 17:17:51 +00:00
* Mon Jan 14 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-0.rc2.git0.1
- Linux v5.0-rc2
Disable debugging options.
2019-01-14 17:06:51 +00:00
* Mon Jan 14 2019 Laura Abbott <labbott@redhat.com>
- Disable debugging options.
Raspberry Pi DT updates, Update AllWinner A64 timer errata workaround
2019-01-13 04:44:19 +00:00
* Sun Jan 13 2019 Peter Robinson <pbrobinson@fedoraproject.org>
- Raspberry Pi updates
- Update AllWinner A64 timer errata workaround
Linux v5.0-rc1-43-g1bdbe2274920
2019-01-11 15:57:17 +00:00
* Fri Jan 11 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-0.rc1.git4.1
- Linux v5.0-rc1-43-g1bdbe2274920
Linux v5.0-rc1-26-g70c25259537c
2019-01-10 16:03:42 +00:00
* Thu Jan 10 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-0.rc1.git3.1
- Linux v5.0-rc1-26-g70c25259537c
Linux v5.0-rc1-24-g4064e47c8281
2019-01-09 18:11:34 +00:00
* Wed Jan 09 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-0.rc1.git2.1
- Linux v5.0-rc1-24-g4064e47c8281
Fix CVE-2019-3701 (rhbz 1663729 1663730)
2019-01-09 15:50:29 +00:00
* Wed Jan 09 2019 Justin M. Forbes <jforbes@fedoraproject.org>
- Fix CVE-2019-3701 (rhbz 1663729 1663730)
Linux v5.0-rc1-2-g7b5585136713
2019-01-08 23:19:56 +00:00
* Tue Jan 08 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-0.rc1.git1.1
- Linux v5.0-rc1-2-g7b5585136713
Reenable debugging options.
2019-01-08 23:20:37 +00:00
* Tue Jan 08 2019 Laura Abbott <labbott@redhat.com>
- Reenable debugging options.
Updates for secure boot
2019-01-07 21:09:43 +00:00
* Mon Jan 07 2019 Justin M. Forbes <jforbes@fedoraproject.org>
- Updates for secure boot
Linux v5.0-rc1 5.0! Yay! Most of the hard work of what to do has already been figured out (see d7293323e7b09ea8bd2f0bbdb43a9b169562bc4d) We will once again need to undo some hacks when 5.0 is officially released: upstream_sublevel kversion Source0
2019-01-07 15:32:57 +00:00
* Mon Jan 07 2019 Laura Abbott <labbott@redhat.com> - 5.0.0-0.rc1.git0.1
- Linux v5.0-rc1
Disable debugging options.
2019-01-07 15:03:21 +00:00
* Mon Jan 07 2019 Laura Abbott <labbott@redhat.com>
- Disable debugging options.
Linux v4.20-10979-g96d4f267e40f
2019-01-04 15:39:28 +00:00
* Fri Jan 04 2019 Laura Abbott <labbott@redhat.com> - 4.21.0-0.rc0.git7.1
- Linux v4.20-10979-g96d4f267e40f
First pass at updates for Arm plaforms, also some IoT updates (mostly a few IIO drivers), a few cleanups of old/dupe config opts
2019-01-04 10:02:12 +00:00
* Fri Jan 4 2019 Peter Robinson <pbrobinson@fedoraproject.org>
- Updates for Arm plaforms
- IoT related updates
Linux v4.20-10911-g645ff1e8e704 Dropped part of the efi-lockdown patchset for IMA until conflicts get resolved.
2019-01-03 16:27:44 +00:00
* Thu Jan 03 2019 Laura Abbott <labbott@redhat.com> - 4.21.0-0.rc0.git6.1
- Linux v4.20-10911-g645ff1e8e704
Linux v4.20-10595-g8e143b90e4d4
2019-01-02 16:15:21 +00:00
* Wed Jan 02 2019 Laura Abbott <labbott@redhat.com> - 4.21.0-0.rc0.git5.1
- Linux v4.20-10595-g8e143b90e4d4
Linux v4.20-9221-gf12e840c819b
2018-12-31 22:45:49 +00:00
* Mon Dec 31 2018 Laura Abbott <labbott@redhat.com> - 4.21.0-0.rc0.git4.1
- Linux v4.20-9221-gf12e840c819b
Linux v4.20-9163-g195303136f19
2018-12-30 17:30:50 +00:00
* Sun Dec 30 2018 Laura Abbott <labbott@redhat.com> - 4.21.0-0.rc0.git3.1
- Linux v4.20-9163-g195303136f19
Enable CONFIG_BPF_LIRC_MODE2 (rhbz 1628151)
2018-12-28 22:12:16 +00:00
* Fri Dec 28 2018 Laura Abbott <labbott@redhat.com>
- Enable CONFIG_BPF_LIRC_MODE2 (rhbz 1628151)
Enable CONFIG_NET_SCH_CAKE (rhbz 1655155)
2018-12-28 22:19:03 +00:00
- Enable CONFIG_NET_SCH_CAKE (rhbz 1655155)
Enable CONFIG_BPF_LIRC_MODE2 (rhbz 1628151)
2018-12-28 22:12:16 +00:00
Linux v4.20-6428-g00c569b567c7
2018-12-28 21:55:13 +00:00
* Fri Dec 28 2018 Laura Abbott <labbott@redhat.com> - 4.21.0-0.rc0.git2.1
- Linux v4.20-6428-g00c569b567c7
Set CONFIG_REALTEK_PHY=y to workaround realtek ethernet issues (rhbz 1650984)
2018-12-27 15:50:01 +00:00
* Thu Dec 27 2018 Hans de Goede <hdegoede@redhat.com>
- Set CONFIG_REALTEK_PHY=y to workaround realtek ethernet issues (rhbz 1650984)
Linux v4.20-3117-ga5f2bd479f58
2018-12-26 21:30:36 +00:00
* Wed Dec 26 2018 Laura Abbott <labbott@redhat.com> - 4.21.0-0.rc0.git1.1
- Linux v4.20-3117-ga5f2bd479f58
Reenable debugging options.
2018-12-26 20:03:35 +00:00
* Wed Dec 26 2018 Laura Abbott <labbott@redhat.com>
- Reenable debugging options.
Linux v4.20.0
2018-12-24 17:17:34 +00:00
* Mon Dec 24 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-1
- Linux v4.20.0
Another fix for issue affecting Raspberry Pi 3-series WiFi (rhbz 1652093)
2018-12-24 02:47:39 +00:00
* Mon Dec 24 2018 Peter Robinson <pbrobinson@fedoraproject.org>
- Another fix for issue affecting Raspberry Pi 3-series WiFi (rhbz 1652093)
Linux v4.20-rc7-214-g9097a058d49e
2018-12-21 17:57:15 +00:00
* Fri Dec 21 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc7.git3.1
- Linux v4.20-rc7-214-g9097a058d49e
Linux v4.20-rc7-202-g1d51b4b1d3f2
2018-12-20 16:44:09 +00:00
* Thu Dec 20 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc7.git2.1
- Linux v4.20-rc7-202-g1d51b4b1d3f2
Initial support for Raspberry Pi model 3A+
2018-12-20 03:16:00 +00:00
* Wed Dec 19 2018 Peter Robinson <pbrobinson@fedoraproject.org>
- Initial support for Raspberry Pi model 3A+
Stability fixes for Raspberry Pi MMC (sdcard) driver
2018-12-20 04:05:07 +00:00
- Stability fixes for Raspberry Pi MMC (sdcard) driver
Initial support for Raspberry Pi model 3A+
2018-12-20 03:16:00 +00:00
Linux v4.20-rc7-6-gddfbab46539f
2018-12-18 22:46:25 +00:00
* Tue Dec 18 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc7.git1.1
- Linux v4.20-rc7-6-gddfbab46539f
- Reenable debugging options.
Linux v4.20-rc7
2018-12-17 13:30:59 +00:00
* Mon Dec 17 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc7.git0.1
- Linux v4.20-rc7
Disable debugging options.
2018-12-17 12:35:24 +00:00
* Mon Dec 17 2018 Justin M. Forbes <jforbes@fedoraproject.org>
- Disable debugging options.
Enhancements for Raspberrp Pi Camera
2018-12-17 05:13:39 +00:00
* Fri Dec 14 2018 Peter Robinson <pbrobinson@fedoraproject.org>
- Enhancements for Raspberrp Pi Camera
Linux v4.20-rc6-82-g65e08c5e8631
2018-12-13 22:32:46 +00:00
* Thu Dec 13 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc6.git2.1
- Linux v4.20-rc6-82-g65e08c5e8631
* Wed Dec 12 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc6.git1.2
- Reenable debugging options.
Linux v4.20-rc6-25-gf5d582777bcb
2018-12-11 17:32:35 +00:00
* Tue Dec 11 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc6.git1.1
- Linux v4.20-rc6-25-gf5d582777bcb
Really fix non functional hotkeys on Asus FX503VD (#1645070)
2018-12-11 11:24:42 +00:00
* Tue Dec 11 2018 Hans de Goede <hdegoede@redhat.com>
- Really fix non functional hotkeys on Asus FX503VD (#1645070)
Linux v4.20-rc6
2018-12-10 15:56:51 +00:00
* Mon Dec 10 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc6.git0.1
- Linux v4.20-rc6
Disable debugging options.
2018-12-10 13:04:52 +00:00
* Mon Dec 10 2018 Justin M. Forbes <jforbes@fedoraproject.org>
- Disable debugging options.
Linux v4.20-rc5-86-gb72f711a4efa
2018-12-07 16:06:21 +00:00
* Fri Dec 07 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc5.git3.1
- Linux v4.20-rc5-86-gb72f711a4efa
Linux v4.20-rc5-44-gd08970904582
2018-12-05 20:01:46 +00:00
* Wed Dec 05 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc5.git2.1
- Linux v4.20-rc5-44-gd08970904582
Fix corruption bug in direct dispatch for blk-mq
2018-12-05 14:48:42 +00:00
* Wed Dec 05 2018 Jeremy Cline <jeremy@jcline.org>
- Fix corruption bug in direct dispatch for blk-mq
Linux v4.20-rc5-21-g0072a0c14d5b
2018-12-04 22:49:41 +00:00
* Tue Dec 04 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc5.git1.1
- Linux v4.20-rc5-21-g0072a0c14d5b
- Reenable debugging options.
Linux v4.20-rc5
2018-12-03 18:02:17 +00:00
* Mon Dec 03 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc5.git0.1
- Linux v4.20-rc5
Disable debugging options.
2018-12-03 17:00:53 +00:00
* Mon Dec 03 2018 Justin M. Forbes <jforbes@fedoraproject.org>
- Disable debugging options.
Fix non functional hotkeys on Asus FX503VD (#1645070)
2018-12-03 16:34:30 +00:00
* Mon Dec 3 2018 Hans de Goede <hdegoede@redhat.com>
- Fix non functional hotkeys on Asus FX503VD (#1645070)
Linux v4.20-rc4-156-g94f371cb7394
2018-11-30 16:04:13 +00:00
* Fri Nov 30 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc4.git2.1
- Linux v4.20-rc4-156-g94f371cb7394
Linux v4.20-rc4-35-g121b018f8c74
2018-11-28 21:44:05 +00:00
* Wed Nov 28 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc4.git1.1
- Linux v4.20-rc4-35-g121b018f8c74
- Reenable debugging options.
Linux v4.20-rc4
2018-11-26 15:39:57 +00:00
* Mon Nov 26 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc4.git0.1
- Linux v4.20-rc4
Disable debugging options.
2018-11-26 13:21:54 +00:00
- Disable debugging options.
Linux v4.20-rc3-83-g06e68fed3282
2018-11-20 19:31:50 +00:00
* Tue Nov 20 2018 Jeremy Cline <jcline@redhat.com> - 4.20.0-0.rc3.git1.1
- Linux v4.20-rc3-83-g06e68fed3282
Reenable debugging options.
2018-11-20 19:29:31 +00:00
* Tue Nov 20 2018 Jeremy Cline <jcline@redhat.com>
- Reenable debugging options.
Turn on CONFIG_PINCTRL_GEMINILAKE on x86_64 (rhbz#1639155)
2018-11-20 09:54:58 +00:00
* Tue Nov 20 2018 Hans de Goede <hdegoede@redhat.com>
- Turn on CONFIG_PINCTRL_GEMINILAKE on x86_64 (rhbz#1639155)
Add a patch fixing touchscreens on HP AMD based laptops (rhbz#1644013)
2018-11-20 10:01:50 +00:00
- Add a patch fixing touchscreens on HP AMD based laptops (rhbz#1644013)
Add a patch fixing KIOX010A accelerometers (rhbz#1526312)
2018-11-20 10:45:21 +00:00
- Add a patch fixing KIOX010A accelerometers (rhbz#1526312)
Turn on CONFIG_PINCTRL_GEMINILAKE on x86_64 (rhbz#1639155)
2018-11-20 09:54:58 +00:00
Linux v4.20-rc3
2018-11-19 16:09:06 +00:00
* Mon Nov 19 2018 Jeremy Cline <jcline@redhat.com> - 4.20.0-0.rc3.git0.1
- Linux v4.20-rc3
Disable debugging options.
2018-11-19 16:07:20 +00:00
* Mon Nov 19 2018 Jeremy Cline <jcline@redhat.com>
- Disable debugging options.
Fix WiFi on Raspberry Pi 3 on aarch64 (rhbz 1649344), Fixes for Raspberry Pi hwmon driver and firmware interface
2018-11-17 18:06:28 +00:00
* Sat Nov 17 2018 Peter Robinson <pbrobinson@fedoraproject.org>
- Fix WiFi on Raspberry Pi 3 on aarch64 (rhbz 1649344)
- Fixes for Raspberry Pi hwmon driver and firmware interface
Enable a few modules needed for accelerometer and other sensor support on some HP X2 2-in-1s
2018-11-16 13:55:41 +00:00
* Fri Nov 16 2018 Hans de Goede <hdegoede@redhat.com>
- Enable a few modules needed for accelerometer and other sensor support
on some HP X2 2-in-1s
Linux v4.20-rc2-52-g5929a1f0ff30
2018-11-15 17:52:16 +00:00
* Thu Nov 15 2018 Justin M. Forbes <jforbes@redhat.com> - 4.20.0-0.rc2.git2.1
- Linux v4.20-rc2-52-g5929a1f0ff30
* Wed Nov 14 2018 Justin M. Forbes <jforbes@redhat.com> - 4.20.0-0.rc2.git1.1
- Linux v4.20-rc2-37-g3472f66013d1
- Reenable debugging options.
- Further updates for ARM - More Qualcomm SD845 enablement - FPGA Device Feature List (DFL) support - Minor cleanups
2018-11-13 03:06:17 +00:00
* Mon Nov 12 2018 Peter Robinson <pbrobinson@fedoraproject.org>
- Further updates for ARM
- More Qualcomm SD845 enablement
- FPGA Device Feature List (DFL) support
- Minor cleanups
Linux v4.20-rc2
2018-11-12 00:17:57 +00:00
* Sun Nov 11 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc2.git0.1
- Linux v4.20-rc2
Disable debugging options.
2018-11-12 00:10:13 +00:00
- Disable debugging options.
Linux v4.20-rc1-145-gaa4330e15c26
2018-11-09 22:53:08 +00:00
* Fri Nov 09 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc1.git4.1
- Linux v4.20-rc1-145-gaa4330e15c26
Initial Qualcomm SD845 enablement
2018-11-09 11:44:56 +00:00
* Thu Nov 8 2018 Peter Robinson <pbrobinson@fedoraproject.org>
- Initial Qualcomm SD845 enablement
Linux v4.20-rc1-98-gb00d209241ff
2018-11-08 22:25:24 +00:00
* Thu Nov 08 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc1.git3.1
- Linux v4.20-rc1-98-gb00d209241ff
Linux v4.20-rc1-87-g85758777c2a2
2018-11-07 22:31:05 +00:00
* Wed Nov 07 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc1.git2.1
- Linux v4.20-rc1-87-g85758777c2a2
Initial Arm config updates for 4.20
2018-11-07 13:41:50 +00:00
* Wed Nov 7 2018 Peter Robinson <pbrobinson@fedoraproject.org>
- Initial Arm config updates for 4.20
Linux v4.20-rc1-62-g8053e5b93eca
2018-11-06 22:16:11 +00:00
* Tue Nov 06 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc1.git1.1
- Linux v4.20-rc1-62-g8053e5b93eca
- Reenable debugging options.
Linux v4.20-rc1
2018-11-05 16:19:40 +00:00
* Mon Nov 05 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc1.git0.1
- Linux v4.20-rc1
Disable debugging options.
2018-11-05 14:07:31 +00:00
* Mon Nov 05 2018 Justin M. Forbes <jforbes@fedoraproject.org>
- Disable debugging options.
Linux v4.19-12532-g8adcc59974b8
2018-11-02 17:07:56 +00:00
* Fri Nov 02 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc0.git9.1
- Linux v4.19-12532-g8adcc59974b8
Linux v4.19-12279-g5b7449810ae6
2018-11-01 16:00:41 +00:00
* Thu Nov 01 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc0.git8.1
- Linux v4.19-12279-g5b7449810ae6
Linux v4.19-11807-g310c7585e830
2018-10-31 18:11:02 +00:00
* Wed Oct 31 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc0.git7.1
- Linux v4.19-11807-g310c7585e830
Linux v4.19-11706-g11743c56785c
2018-10-30 16:51:07 +00:00
* Tue Oct 30 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc0.git6.1
- Linux v4.19-11706-g11743c56785c
Linux v4.19-9448-g673c790e7282
2018-10-29 18:54:19 +00:00
* Mon Oct 29 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc0.git5.1
- Linux v4.19-9448-g673c790e7282
Linux v4.19-6148-ge5f6d9afa341
2018-10-26 16:30:07 +00:00
* Fri Oct 26 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc0.git4.1
- Linux v4.19-6148-ge5f6d9afa341
Linux v4.19-5646-g3acbd2de6bc3
2018-10-25 17:49:20 +00:00
* Thu Oct 25 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc0.git3.1
- Linux v4.19-5646-g3acbd2de6bc3
Linux v4.19-4345-g638820d8da8e
2018-10-24 18:39:38 +00:00
* Wed Oct 24 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc0.git2.1
- Linux v4.19-4345-g638820d8da8e
Linux v4.19-1676-g0d1b82cd8ac2
2018-10-23 15:47:47 +00:00
* Tue Oct 23 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.20.0-0.rc0.git1.1
- Linux v4.19-1676-g0d1b82cd8ac2
- Reenable debugging options.
Linux v4.19
2018-10-22 13:35:14 +00:00
* Mon Oct 22 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-1
- Linux v4.19
- Disable debugging options.
Fix network on some i.MX6 devices (rhbz 1628209)
2018-10-22 09:33:35 +00:00
* Sat Oct 20 2018 Peter Robinson <pbrobinson@fedoraproject.org>
- Fix network on some i.MX6 devices (rhbz 1628209)
Linux v4.19-rc8-95-g91b15613ce7f Also enable pinctrl-cannonlake (rhbz 1641057)
2018-10-19 14:08:29 +00:00
* Fri Oct 19 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc8.git4.1
- Linux v4.19-rc8-95-g91b15613ce7f
- Enable pinctrl-cannonlake (rhbz 1641057)
Linux v4.19-rc8-27-gfa520c47eaa1
2018-10-18 13:43:15 +00:00
* Thu Oct 18 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc8.git3.1
- Linux v4.19-rc8-27-gfa520c47eaa1
Linux v4.19-rc8-16-gc343db455eb3
2018-10-17 19:53:37 +00:00
* Wed Oct 17 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc8.git2.1
- Linux v4.19-rc8-16-gc343db455eb3
Fixes to Rock960 series of devices, Raspberry Pi graphics fix
2018-10-17 08:14:49 +00:00
* Tue Oct 16 2018 Peter Robinson <pbrobinson@fedoraproject.org>
- Fixes to Rock960 series of devices, improves stability considerably
- Raspberry Pi graphics fix
Linux v4.19-rc8-11-gb955a910d7fd
2018-10-16 19:27:42 +00:00
* Tue Oct 16 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc8.git1.1
- Linux v4.19-rc8-11-gb955a910d7fd
- Re-enable debugging options.
Linux v4.19-rc8
2018-10-15 13:58:53 +00:00
* Mon Oct 15 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc8.git0.1
- Linux v4.19-rc8
Disable debugging options.
2018-10-15 13:55:38 +00:00
* Mon Oct 15 2018 Jeremy Cline <jcline@redhat.com>
- Disable debugging options.
Rebase device specific NVRAM files on brcm WiFi devices to latest Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2018-10-12 19:08:19 +00:00
* Fri Oct 12 2018 Peter Robinson <pbrobinson@fedoraproject.org>
- Rebase device specific NVRAM files on brcm WiFi devices to latest
Linux v4.19-rc7-139-g6b3944e42e2e
2018-10-12 14:04:36 +00:00
* Fri Oct 12 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc7.git4.1
- Linux v4.19-rc7-139-g6b3944e42e2e
Linux v4.19-rc7-61-g9f203e2f2f06
2018-10-11 14:40:23 +00:00
* Thu Oct 11 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc7.git3.1
- Linux v4.19-rc7-61-g9f203e2f2f06
Linux v4.19-rc7-33-gbb2d8f2f6104
2018-10-10 13:53:18 +00:00
* Wed Oct 10 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc7.git2.1
- Linux v4.19-rc7-33-gbb2d8f2f6104
Linux v4.19-rc7-15-g64c5e530ac2c
2018-10-09 14:14:49 +00:00
* Tue Oct 09 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc7.git1.1
- Linux v4.19-rc7-15-g64c5e530ac2c
Turn off debug builds
2018-10-09 14:19:40 +00:00
- Re-enable debugging options.
Linux v4.19-rc7-15-g64c5e530ac2c
2018-10-09 14:14:49 +00:00
Linux v4.19-rc7
2018-10-08 14:49:53 +00:00
* Mon Oct 08 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc7.git0.1
- Linux v4.19-rc7
Disable debugging options.
2018-10-08 14:35:25 +00:00
* Mon Oct 08 2018 Jeremy Cline <jcline@redhat.com>
- Disable debugging options.
Linux v4.19-rc6-223-gbefad944e231
2018-10-05 14:03:26 +00:00
* Fri Oct 05 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc6.git4.1
- Linux v4.19-rc6-223-gbefad944e231
Linux v4.19-rc6-177-gcec4de302c5f
2018-10-04 14:24:01 +00:00
* Thu Oct 04 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc6.git3.1
- Linux v4.19-rc6-177-gcec4de302c5f
Linux v4.19-rc6-37-g6bebe37927f3
2018-10-03 13:45:28 +00:00
* Wed Oct 03 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc6.git2.1
- Linux v4.19-rc6-37-g6bebe37927f3
Linux v4.19-rc6-29-g1d2ba7fee28b
2018-10-02 13:49:52 +00:00
* Tue Oct 02 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc6.git1.1
- Linux v4.19-rc6-29-g1d2ba7fee28b
- Re-enable debugging options.
Disable CONFIG_CRYPTO_DEV_SP_PSP (rhbz 1608242)
2018-10-01 19:45:09 +00:00
* Mon Oct 01 2018 Laura Abbott <labbott@redhat.com>
- Disable CONFIG_CRYPTO_DEV_SP_PSP (rhbz 1608242)
Linux v4.19-rc6
2018-10-01 14:10:04 +00:00
* Mon Oct 01 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc6.git0.1
- Linux v4.19-rc6
Disable debugging options.
2018-10-01 14:03:45 +00:00
* Mon Oct 01 2018 Jeremy Cline <jcline@redhat.com>
- Disable debugging options.
Support loading device specific NVRAM files on brcm WiFi devices
2018-10-01 08:19:41 +00:00
* Mon Oct 1 2018 Peter Robinson <pbrobinson@fedoraproject.org>
- Support loading device specific NVRAM files on brcm WiFi devices
Linux v4.19-rc5-159-gad0371482b1e
2018-09-28 14:03:54 +00:00
* Fri Sep 28 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc5.git3.1
- Linux v4.19-rc5-159-gad0371482b1e
Add thermal trip to bcm283x (Raspberry Pi) cpufreq
2018-09-26 20:09:43 +00:00
* Wed Sep 26 2018 Peter Robinson <pbrobinson@fedoraproject.org>
- Add thermal trip to bcm283x (Raspberry Pi) cpufreq
Add initial RockPro64 DT support
2018-09-27 10:28:10 +00:00
- Add initial RockPro64 DT support
Add thermal trip to bcm283x (Raspberry Pi) cpufreq
2018-09-26 20:09:43 +00:00
Linux v4.19-rc5-143-gc307aaf3eb47
2018-09-26 14:26:28 +00:00
* Wed Sep 26 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc5.git2.1
- Linux v4.19-rc5-143-gc307aaf3eb47
Linux v4.19-rc5-99-g8c0f9f5b309d
2018-09-25 14:10:11 +00:00
* Tue Sep 25 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc5.git1.1
- Linux v4.19-rc5-99-g8c0f9f5b309d
- Re-enable debugging options.
Linux v4.19-rc5
2018-09-24 13:38:39 +00:00
* Mon Sep 24 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc5.git0.1
- Linux v4.19-rc5
Disable debugging options.
2018-09-24 13:26:54 +00:00
* Mon Sep 24 2018 Jeremy Cline <jcline@redhat.com>
- Disable debugging options.
Linux v4.19-rc4-176-g211b100a5ced
2018-09-21 14:10:19 +00:00
* Fri Sep 21 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc4.git4.1
- Linux v4.19-rc4-176-g211b100a5ced
Linux v4.19-rc4-137-gae596de1a0c8
2018-09-20 15:13:47 +00:00
* Thu Sep 20 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc4.git3.1
- Linux v4.19-rc4-137-gae596de1a0c8
Linux v4.19-rc4-86-g4ca719a338d5
2018-09-19 14:03:48 +00:00
* Wed Sep 19 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc4.git2.1
- Linux v4.19-rc4-86-g4ca719a338d5
Linux v4.19-rc4-78-g5211da9ca526
2018-09-18 15:31:01 +00:00
* Tue Sep 18 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc4.git1.1
- Linux v4.19-rc4-78-g5211da9ca526
- Enable debugging options.
Linux v4.19-rc4
2018-09-17 14:26:37 +00:00
* Mon Sep 17 2018 Jeremy Cline <jeremy@jcline.org> - 4.19.0-0.rc4.git0.1
- Linux v4.19-rc4
Drop i686-PAE configuration generation The i686 PAE configuration is unused since it is no longer built.
2018-09-17 14:52:49 +00:00
* Mon Sep 17 2018 Jeremy Cline <jcline@redhat.com>
- Stop including the i686-PAE config in the sources
Disable debugging options.
2018-09-17 14:53:36 +00:00
- Disable debugging options.
Drop i686-PAE configuration generation The i686 PAE configuration is unused since it is no longer built.
2018-09-17 14:52:49 +00:00
Linux v4.19-rc3-247-gf3c0b8ce4840
2018-09-14 16:38:18 +00:00
* Fri Sep 14 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc3.git3.1
- Linux v4.19-rc3-247-gf3c0b8ce4840
Linux v4.19-rc3-130-g54eda9df17f3
2018-09-13 15:04:26 +00:00
* Thu Sep 13 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc3.git2.1
- Linux v4.19-rc3-130-g54eda9df17f3
Add patch silencing "EFI stub: UEFI Secure Boot is enabled." at boot
2018-09-13 13:46:37 +00:00
* Thu Sep 13 2018 Hans de Goede <hdegoede@redhat.com>
- Add patch silencing "EFI stub: UEFI Secure Boot is enabled." at boot
Linux v4.19-rc3-21-g5e335542de83
2018-09-12 13:51:18 +00:00
* Wed Sep 12 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc3.git1.1
- Linux v4.19-rc3-21-g5e335542de83
- Re-enable debugging options.
Linux v4.19-rc3
2018-09-10 15:35:45 +00:00
* Mon Sep 10 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc3.git0.1
- Linux v4.19-rc3
Disable debugging options.
2018-09-10 15:22:35 +00:00
* Mon Sep 10 2018 Jeremy Cline <jcline@redhat.com>
- Disable debugging options.
Linux v4.19-rc2-205-ga49a9dcce802
2018-09-07 16:04:59 +00:00
* Fri Sep 07 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc2.git3.1
- Linux v4.19-rc2-205-ga49a9dcce802
Linux v4.19-rc2-163-gb36fdc6853a3
2018-09-06 15:18:11 +00:00
* Thu Sep 06 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc2.git2.1
- Linux v4.19-rc2-163-gb36fdc6853a3
Linux v4.19-rc2-107-g28619527b8a7
2018-09-05 14:38:06 +00:00
* Wed Sep 05 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc2.git1.1
- Linux v4.19-rc2-107-g28619527b8a7
- Re-enable debugging options
Enable bcm283x VCHIQ, camera and analog audio drivers
2018-09-03 17:14:16 +00:00
* Mon Sep 3 2018 Peter Robinson <pbrobinson@fedoraproject.org>
- Enable bcm283x VCHIQ, camera and analog audio drivers
initial ARM config updates for 4.19
2018-09-04 10:10:48 +00:00
- ARM config updates for 4.19
Enable bcm283x VCHIQ, camera and analog audio drivers
2018-09-03 17:14:16 +00:00
Linux v4.19-rc2
2018-09-03 15:33:33 +00:00
* Mon Sep 03 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc2.git0.1
- Linux v4.19-rc2
Disable debugging options.
2018-09-03 15:30:02 +00:00
* Mon Sep 03 2018 Jeremy Cline <jcline@redhat.com>
- Disable debugging options.
Linux v4.19-rc1-195-g4658aff6eeaa
2018-08-31 15:03:49 +00:00
* Fri Aug 31 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc1.git4.1
- Linux v4.19-rc1-195-g4658aff6eeaa
Linux v4.19-rc1-124-g58c3f14f86c9
2018-08-30 13:12:09 +00:00
* Thu Aug 30 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc1.git3.1
- Linux v4.19-rc1-124-g58c3f14f86c9
Enable the AFS module (rhbz 1616016)
2018-08-29 19:36:50 +00:00
* Wed Aug 29 2018 Jeremy Cline <jeremy@jcline.org>
- Enable the AFS module (rhbz 1616016)
Linux v4.19-rc1-95-g3f16503b7d22
2018-08-29 14:04:59 +00:00
* Wed Aug 29 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc1.git2.1
- Linux v4.19-rc1-95-g3f16503b7d22
Linux v4.19-rc1-88-g050cdc6c9501
2018-08-28 13:50:20 +00:00
* Tue Aug 28 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc1.git1.1
- Linux v4.19-rc1-88-g050cdc6c9501
- Re-enable debugging options
Linux v4.19-rc1
2018-08-27 12:36:42 +00:00
* Mon Aug 27 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc1.git0.1
- Linux v4.19-rc1
Disable debugging options.
2018-08-27 12:22:54 +00:00
* Mon Aug 27 2018 Jeremy Cline <jcline@redhat.com>
- Disable debugging options.
Linux v4.18-12872-g051935978432
2018-08-25 14:26:22 +00:00
* Sat Aug 25 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc0.git12.1
- Linux v4.18-12872-g051935978432
Linux v4.18-12721-g33e17876ea4e
2018-08-24 13:44:58 +00:00
* Fri Aug 24 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc0.git11.1
- Linux v4.18-12721-g33e17876ea4e
Linux v4.18-11682-g815f0ddb346c
2018-08-23 14:08:57 +00:00
* Thu Aug 23 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc0.git10.1
- Linux v4.18-11682-g815f0ddb346c
Linux v4.18-11219-gad1d69735878
2018-08-22 14:08:14 +00:00
* Wed Aug 22 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc0.git9.1
- Linux v4.18-11219-gad1d69735878
Linux v4.18-10986-g778a33959a8a
2018-08-21 15:36:51 +00:00
* Tue Aug 21 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc0.git8.1
- Linux v4.18-10986-g778a33959a8a
Linux v4.18-10721-g2ad0d5269970
2018-08-20 20:19:09 +00:00
* Mon Aug 20 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc0.git7.1
- Linux v4.18-10721-g2ad0d5269970
Linux v4.18-10568-g08b5fa819970
2018-08-19 10:41:45 +00:00
* Sun Aug 19 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc0.git6.1
- Linux v4.18-10568-g08b5fa819970
Linux v4.18-8895-g1f7a4c73a739
2018-08-18 12:52:10 +00:00
* Sat Aug 18 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc0.git5.1
- Linux v4.18-8895-g1f7a4c73a739
Enable CONFIG_AF_KCM (rhbz 1613819)
2018-08-17 19:32:00 +00:00
* Fri Aug 17 2018 Laura Abbott <labbott@redhat.com>
- Enable CONFIG_AF_KCM (rhbz 1613819)
Linux v4.18-8108-g5c60a7389d79
2018-08-17 08:27:40 +00:00
* Fri Aug 17 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc0.git4.1
- Linux v4.18-8108-g5c60a7389d79
- Re-enable AEGIS and MORUS ciphers (rhbz 1610180)
Linux v4.18-7873-gf91e654474d4
2018-08-16 13:56:49 +00:00
* Thu Aug 16 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc0.git3.1
- Linux v4.18-7873-gf91e654474d4
Drop PPC64 (Big Endian) configs
2018-08-15 20:29:12 +00:00
* Wed Aug 15 2018 Peter Robinson <pbrobinson@fedoraproject.org>
- Drop PPC64 (Big Endian) configs
Linux v4.18-2978-g1eb46908b35d
2018-08-15 17:58:06 +00:00
* Wed Aug 15 2018 Laura Abbott <labbott@redhat.com> - 4.19.0-0.rc0.git2.1
- Linux v4.18-2978-g1eb46908b35d
Linux v4.18-1283-g10f3e23f07cb
2018-08-14 09:44:37 +00:00
* Tue Aug 14 2018 Jeremy Cline <jcline@redhat.com> - 4.19.0-0.rc0.git1.1
- Reenable debugging options.
- Linux v4.18-1283-g10f3e23f07cb
Linux v4.18
2018-08-13 15:43:39 +00:00
* Mon Aug 13 2018 Laura Abbott <labbott@redhat.com> - 4.18.0-1
- Linux v4.18
- Disable debugging options.
Reference in New Issue Copy Permalink