I think this is slightly different on openQA stg with current
qemu with the EDID settings, for some reason.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
These look slightly different when there are security updates,
the security needle variants hadn't been updated yet for the
latest changes in background, upstream toolkit etc.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
GTK4 enabled font hinting recently, and that breaks this huge pile
of needles.
There are probably a few more that need doing, but it's 2am and
I've had enough.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
From anaconda-37.12.1, anaconda defaults to GPT for all BIOS
installs. So we need to create a BIOS boot partition when doing
a BIOS install. I think all other potential configs (x86_64
UEFI, aarch64 (UEFI), ppc64le (OFW)) are covered under the other
two paths, so just making this `else` should be OK.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Lukas left these lying around stg, they are needed.
clocks_alarm_cross_remove is a dupe of gnome_button_cross_remove
with a bad name, so removed it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We already changed how we do this since the context menu entry
was removed, just cleaning up the now-unneeded needles.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We had a ton of needles all covering something very similar
(press a "Credits" button in a GNOME app). There are about four
real variations: old-style regular face white-on-black (eog),
old-style regular face (nautilus and evince before recent
libadwaita ports), old-style bold face (GTE and Clocks before
new libadwaita), and new-style (everything that's been ported
to use libadwaita for its About page). Let's just rationalize
it down to those, using the same needle tag for all of them.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Silverblue has Calculator as an older-versioned flatpak, so it
still looks like it did in GNOME 42 (blue equals button, lighter
colored number buttons).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It needs to match even if the 'link target hint' is showing at
bottom left and kinda obscuring it a little.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
They changed from "Software Updates" to "Software updates".
Apparently this was intentional and in line with Patternfly
guidance, so not marking as a workaround.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
I think the change here is the new version of noto fonts. GNOME
uses adwaita so it's not affected.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
That last commit to 'fix' the Clocks tests when Silverblue needs
location access to be granted wasn't complete, I left the needle
out. D'oh. Take the chance to give it a better name too.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The previous commit is the correct fix for the problem here.
Adding a needle that matches on the tray icon was not correct,
we need to be sure that we can access the Updates view from
within Discover itself.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR changes the way to download the test data into the VM.
Although it does not use a disk image as suggested in one
of the review, it does not clone the entire repository, but
a simple tar.gz file that holds the data which will be
distributed into the directory structure.
This way, the amount of data needed to be downloaded dropped
from approximately 50MB to below 2MB.
Also, the existing test suites were adapted to this situation.
The wider one seems to happen when text at the bottom of the
login box prevents the "Fedora Linux..." text from wrapping
across two lines. I have no idea why we see two different
cases of the "Fedora Linux text wrapped" variant with very
slightly different amounts of whitespace, but we do, it seems
we need both of these.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Not sure what's going on here, but it seems like the resolution
of the UEFI bootloader screen in some tests changed. Not sure
if this is a qemu or edk2 change or what.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is the automation of the optional testcase https://fedoraproject.org/wiki/QA:Testcase_i18n_default_fonts.
The test implementation runs the same commands as the mentioned test
case and checks the expected output. It is designed to run in the scope
of postinstall tests when the language is set to "japanese".
We've been told the bookmark toolbar no longer being shown on app
start is by design, so we can't call this a workaround needle
any more really. There's a preference we could use to turn it
back on so we can wait for the bookmark toolbar to show up to
be sure firefox is fully started, but in fact tests seem to be
passing OK with just this needle these days, so we may not need
to.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Firefox 97 is now stable on all releases, so we can forget about
handling browser_download_save and just assume download will
happen automatically.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Before F34 we had to launch the update tool from the systray.
This isn't the case any more, so we can throw all this code and
these needles away.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We seem to be solidly back to always getting a permanent update
notification in current F36/Rawhide, so we don't need this more
complex path any more. We also don't need these needles any more,
they haven't matched for months.
Same difference as for English - 4 pixels of padding was added.
Also move a stray Russian needle to the right directory.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We can wind up with this a bit hidden by the bottom-left URL
location indicator, so shrink it a bit to hopefully match even
in that case.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The Cockpit update test relies on scrolling the Cockpit left bar
to find the Software Updates page, but in Firefox 100, the scroll
bars disappear shortly after the last time you moved the mouse.
To deal with this, instead of looking for a scroll bar to scroll,
we'll click the search box in the left bar and hit 'up' to scroll
it to the bottom.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Not sure what changed in the addon needles. For the webui needle
I think it's affected by the new scrollbar behaviour.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We get these variant needles with the keyboard icon and layout
name at slightly different relative vertical positions every
time we do a Final RC. I think the layout is affected by the
pre-release warning text no longer being present. Usually each
cycle something changes with the icon or with font rendering,
so the needles have to be updated, as in this case.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
So it turns out the translated layout indicators in Arabic are
intentional:
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5257
so we can just add needles for them and we're good. Also update
a couple of other needles which need updates since we last
reached this far in the tests.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The new version of the F36 backgrounds means all these needles
that hit translucent panel elements need updating.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
SDDM looks slightly different on F36 since 20220319.n.0. The
Sleep / Restart / Shut Down / Other... buttons are visible, and
the keyboard layout indicator isn't. Previously on F36, and still
on Rawhide, those buttons aren't shown but the layout indicator
is. I'm not sure why this is, but it means the size of the name
labels is slightly different, and we need new needles.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We very rarely see this needle - only when we run the 'generic'
tests on an Everything image instead of a Server one, which
will usually only happen if we trigger it manually. I did this
recently to test an anaconda update, and found it needs an
update.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
OK, this is annoying. GNOME Software intentionally does *not*
clear the 'download' or 'reboot and update' button when you hit
the refresh button, it just leaves them sitting there while the
refresh happens. So let's specifically require the 'refreshing'
text to appear and go away before we try and click on download
or apply.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
