Resolves: BZ#1353099
Drop unsupported Windows releases from virtio-win
During the official fix for 1353099, the smbus become empty. So it needs
to be removed.
This release contains the following drivers and build number:
- pvpanic, build 137
- vioinput, build 137
- vioser, build 137
- balloon, build 13
- viorng, build 137
- netkvm, build 139
- vioscsi, build 136
- viostor, build 136
- qxl, build qxl-win-unsigned-0.1-24
- qemupciserial, build 137
- smbus, build 138
- qemufwcfg, build 128
This release addresses the following BZs:
- Resolves: BZ#1075292
([virtio-win][qemu-ga-win] qemu guest agent should report correctly error description (windows guest))
- Resolves: BZ#1202267
([virtio-win][wddm-qxl]The display of guest change to black-white mode after s4 on win8.1-32)
- Resolves: BZ#1218449
(Ship qemupciserial.cat on the iso)
- Resolves: BZ#1256626
(windows guest(win7/win10) CTRL_VLAN=on/off does not support for virtio-net-pci)
- Resolves: BZ#1303510
(Change the copyright on all the Windows drivers to "2017" in virtio-win-prewhql build)
- Resolves: BZ#1357406
(Add virtio-input Windows guest driver)
- Resolves: BZ#1369353
(virtio_balloon: backport "available memory" stat support)
- Resolves: BZ#1370351
([virtio-win][vioser] serial port can not transfer data when nr>=31)
- Resolves: BZ#1372174
(NIC device cannot start when boot a Win10 guest with multiple queues(256 queues))
- Resolves: BZ#1374725
(Output command {"execute": "guest-info"} includes unsupported qemu-ga-win commands)
- Resolves: BZ#1387125
(QEMU guest agent VSS Provider is crashed after snapshot deletion)
- Resolves: BZ#1388775
([virtio-win][vioinput]guest bsod[DRIVER_PAGE_FAULT_IN_FREED_SPECIAL_POOL (d5)] when run virtio-input whql jobs)
- Resolves: BZ#1388920
([NetKVM] review additional possible performance improvements)
- Resolves: BZ#1389125
(viostor extend viostor driver with STORAGE_REQUEST_BLOCK support)
- Resolves: BZ#1389445
(VirtIO library interface incompatiblity with NetKvm (bool definition))
- Resolves: BZ#1390714
([RFE] [virtio-win] Add fw_cfg device in windows guest in order to make svvp test pass)
- Resolves: BZ#1391844
([virtio-win][balloon][viorng][virtio-input] cannot install balloon, viorng and virtio-input driver successfully on win10-32 and win8.1-32(build 127))
- Resolves: BZ#1392693
([virtio-win][vioser][whql] job "PCI Hardware Compliance Test For a Single Device(PCIHCT)" fail w/ "-M q35")
- Resolves: BZ#1392719
([virtio-win][vioser]can't install serial driver successfuly on win10-64 guest with q35 machine type(build 128))
- Resolves: BZ#1392819
([NetKVM] Race between ParaNdis_SetupRSSQueueMap and ParaNdis6_SendNetBufferLists due to the lack of synchronisation)
- Resolves: BZ#1393140
([virtio-win][vioser][whql]BSOD when running job "WDF Logo Test-Final" w/ q35 on win2008-32)
- Resolves: BZ#1393772
(New unknown device "SM Bus Controller" shows in system device manager after booting with q35)
- Resolves: BZ#1395790
(vioscsi.sys BSOD when adding CPU to live Windows Server 2012R2 guest)
- Resolves: BZ#1402496
(Balloon: Stats don't work if balloon driver is disabled when blnsvr service starts)
- Resolves: BZ#1406271
([virtio-win][qemu-ga-win] if guest is auto-released after 10s, the following "guest-fsfreeze-freeze" and "guest-fsfreeze-thaw" should not prompt error.)
- Resolves: BZ#1408771
([virtio-win][viorng] Guest win2008-32 occurs BSoD when running job "WDF Logo Tests - Final" under q35)
- Resolves: BZ#1408901
([virtio-win][whql][vioinput] Many jobs failed on win2012R2/ws2016 when running w/o GUI)
- Resolves: BZ#1409298
([virtio-win][balloon] Guest win2008-32 occurs BSoD when running job 'Device Path Exerciser')
- Resolves: BZ#1411092
(4K virtual drives broken on Windows)
- Resolves: BZ#1411596
(Virtio driver of network device works abnormally when convert win2008 x86 guest from kvm to rhev by virt-v2v)
- Resolves: BZ#1412067
([virtio-win][whql][netkvm] job 1c_IOCTLCoverage failed.)
- Resolves: BZ#1419785
([virtio-win][whql][balloon] Guest WIN8-32 occured BSOD in job "DF - PNP Stop (Rebalance) Device Test (Certification)")
- Resolves: BZ#1419854
(vioinput: Driver is dropping rapid input events)
- Resolves: BZ#1419900
(BSOD of vioser.sys on Win10 in S0->S4->S0 flow)
- Resolves: BZ#1421258
(Add qemufwcfg driver to virtio-win)
- Resolves: BZ#1421988
([virtio-win][virtio-input] Read wrong device in guest's device manager when do hot-plug a mouse device and keyboard device)
- Resolves: BZ#1425967
(Update qemupciserial.* files for virtio-win)
- Resolves: BZ#1426482
([virtio-win][balloon] cost too much time when continues enlarge/evict during playing video)
- Resolves: BZ#1429807
([virtio-win][whql][netkvm] guests bsod(d1) when running job "NDISTest 6.0 - [1 Machine] - 1c_FaultHandling")
- Resolves: BZ#1431561
([NetKVM] Implement VIRTIO_NET_F_GUEST_ANNOUNCE feature in Windows virtio-net driver - IPv6)
- Resolves: BZ#1432567
([virtio-win][vioscsi] Crash dump not generated with num_queues=4)
- Resolves: BZ#1433266
([virtio-win][netkvm] cannot launch anti-virus software(ESET Endpoint Antivirus) with virtio NetKVM driver)
- Resolves: BZ#1433830
([virtio-win][whql][netkvm] guests bsod(d1) when running job "NDISTest 6.5 - [2 Machine] - OffloadLSO")
- Resolves: BZ#1434316
([qemu-ga-win] Guest agent might hang if VSS service is stoped during freeze)
- Resolves: BZ#1435778
(virtio-serial breaks when CPU hot added to Windows Server 2008R2 Datacenter)
- Resolves: BZ#1438410
(Net-KVM: Add VlanId property to Inf file)
- Resolves: BZ#1439085
([virtio-win][netkvm] Guest win2008-32 failed in job Ethernet - NDISTest 6.0 with 1c_wmicoverage failure)
- Resolves: BZ#1441595
([virtio-win][viostor]windows 2016 can not generate dump file on AMD host)
- Resolves: BZ#1442322
([virtio-win][viostor]Cannot enlarge/shrink disk with virtio-blk-pci device.)
- Resolves: BZ#1443019
([virtio-win][qemupciserial] job "PNP Rebanlance RequestNew Resources Device Test" and other two jobs failed on win10+ guests)
- Resolves: BZ#1444271
([virtio-win][viorng]job "DF - InfVerif INF Verification" failed on HLK 1703)
- Resolves: BZ#1451652
(RFE: Add smbus driver to virtio-win)
- Resolves: BZ#1456403
(Net-KVM: Implement MTU report feature of the virtio-net device)
Add Windows 2016 drivers to .vfd files
Updates copyright notice in virtio-win_license.txt file (bz#1303511)
See the changelog entry for 1.9.0-1 for a full description
of the changes in this release.
- Resolves: bz#1340571
(Add Windows 2k16 drivers to virtio-win)
- Resolves: bz#1303511
(update copyright of license.txt file in virtio-win-1.7.5-0.el6 to 2016)
This release updates the VirtIO Block and Serial drivers for
Windows 10 and 2016 release to use the 126 build.
See the changelog entry for 1.9.0-1 for a full description
of the changes in this release.
- Resolves: bz#1340571
(Add Windows 2k16 drivers to virtio-win)
- The virtio-win-1.9.0-1 release contains:
- support for Windows 2016
- Bugfixes and improvements (see below for bugzilla list)
- The drivers contained in this release are:
- pvpanic build 121
- Balloon build 125
- viorng build 125
- viostor build 125 (Win 10 and 2016) and 126 (all others)
- NetKVM build 126
- vioser build 125 (Win 10 and 2016) and 126 (all others)
- vioscsi build 124
- Also included in this release are:
- qemu guest agent 7.3.2-1
- qxl 0.1-24
This release addresses the following BZs:
- Resolves: bz#950611
([NetKVM] Pass WHQL tests with RSC feature enabled )
- Resolves: bz#954183
([NetKVM] Static driver verifier fails with NetKVM )
- Resolves: bz#1013336
([virtio-win][netkvm] BSoD occurs when running NDISTest6.5 -[2 Machine] - MPE_Ethernet job on windows 2012 (Win10))
- Resolves: bz#1122364
([virtio-win][vioser][rhel6]win2k8r2 guest bsod(7e) when do continuous hotplug/unplug during virtio serial in use with driver verifier enabled)
- Resolves: bz#1157987
(Windows hangs at startup if virtio-scsi device is configured with vectors=1, 2, and 3)
- Resolves: bz#1161453
([whql][vioscsi]Job named by SCSI Compliance Test (LOGO) failed on win2k8-R2 and win8-64 guest)
- Resolves: bz#1190960
([whql][netkvm][mq]job failed due to "Received some net buffer lists out of order" w/ 4 queues)
- Resolves: bz#1208465
(Windows guest boots up slowly with multiple virtual NIC devices (I attached 232 with mutifunction=on))
- Resolves: bz#1210166
([vioscsi] Add multiqueue support to Windows virtio-scsi driver.)
- Resolves: bz#1214177
([virtio-win] [NetKVM] Compilation errors with Visual Studio 2015 while trying to compile NetKVM)
- Resolves: bz#1214568
([RFE][virtio-win] Add WMI facility to check the virito-scsi mq enabled)
- Resolves: bz#1219841
([RFE] vioscsi.sys should support MS Cluster Services)
- Resolves: bz#1223426
([NetKVM] Performance degradation with multi-queue)
- Resolves: bz#1234741
([virtio-win][vioscsi]win2012 guest bsod(c9) when whql test DPWLK-HotAdd(1104) job)
- Resolves: bz#1234751
([virtio-win][vioscsi]win2012R2 guest bsod(d1) when whql test DPWLK-HotAdd(1104) job)
- Resolves: bz#1235108
([virtio-win][vioscsi]VIOSCSI driver is not signed by redhat certification on win200832/64 platform)
- Resolves: bz#1237024
([virtio-win][netkvm]ipv6 uploading speed is quite slow when set "TCP/UDP checksum offload(IPv6)" to "Rx & Tx Enabled")
- Resolves: bz#1241986
(win7 64bit BSOD when booting it on RHEL7.2 host)
- Resolves: bz#1243229
([virtio-win][scsi][windows 10]win10 and win2016 guests bsod with D1 when run job "Bus Reset Test")
- Resolves: bz#1245957
([WHQL][viostor][data-plane]it could not generate dump file on WIN2008-32/64 via WLK while running Crash Dump job)
- Resolves: bz#1246993
([virtio-win][svvp][ws2016] job "Signed Driver Check (CheckLogo)" failed during ws2016 svvp test)
- Resolves: bz#1247006
([virtio-win][svvp][ws2016] job "Profile Interrupt Test" failed during ws2016 svvp test)
- Resolves: bz#1248873
([whql][netkvm]Job named NDISTest6.5-InvalidPackets failed with HCK on win8-32/win8-64(build 106))
- Resolves: bz#1248977
([virtio-win][vioscsi] Cannot install vioscsi driver on win7-32&win2008-32)
- Resolves: bz#1249867
([WHQL][vioscsi]Job hangs and it cannot continure on windows2008 guest via WLK)
- Resolves: bz#1250854
([WHQL][vioscsi]The job named crash dump failed on windows 2008 -32/64 platform)
- Resolves: bz#1256583
(Win10 guest can't get ip address from dhcpserver when add mrg_rxbuf=off for virtio-net-pci)
- Resolves: bz#1266340
([whql][netkvm]NDISTest6.5 Manual test failed and generate dump file on windows 2008 guest)
- Resolves: bz#1270149
([virtio-win][netkvm] Check guest network link status of virtio nic with status=on failed (build 110))
- Resolves: bz#1289406
([virtio-win][vioser] Cannot install vioser driver successfully)
- Resolves: bz#1292788
([virtio-win][viostor] Cannot install viostor driver on win7-64&win2008-64&win2008R2)
- Resolves: bz#1293042
([virtio-win][vioser] Extra '-' (dash) in serial driver name)
- Resolves: bz#1293249
([virtio-win][vioser] IOCTL_GET_INFORMATION does not return required buffer size)
- Resolves: bz#1296092
([virtio-win][balloon] balloon driver can not be installed automately via pnputil)
- Resolves: bz#1303511
(update copyright of license.txt file in virtio-win to 2016)
- Resolves: bz#1303809
(provide QEMU guest agent command for setting root/administrator account password - window guests)
- Resolves: bz#1303988
([virtio-win] [virtio-1] [RFE] Add Virtio-1.0 support for NetKVM)
- Resolves: bz#1304041
([virtio-win] [virtio-1] [RFE] Add Virtio-1.0 support for vioserial)
- Resolves: bz#1304044
([virtio-win] [virtio-1] [RFE] Add Virtio-1.0 support for vioscsi)
- Resolves: bz#1304049
([virtio-win] [virtio-1] [RFE] Add Virtio-1.0 support for viostor)
- Resolves: bz#1313243
([virtio-win][netkvm][rhel6]win2008-32 guest bsod with HARDWARE_INTERRUP_STORM(f2) when running netperf for longevity test)
- Resolves: bz#1313887
([RFE] provide QEMU guest agent command for setting root account password (Windows guest) [rhel-7.3])
- Resolves: bz#1315984
([virtio-win] [virtio-1] [RFE] Add Virtio-1.0 support for baloon)
- Resolves: bz#1315985
([virtio-win] [virtio-1] [RFE] Add Virtio-1.0 support for rng)
- Resolves: bz#1321774
([virtio-win][vioscsi]fio jobs keep printing "0% done" in win2012r2 guest)
- Resolves: bz#1325078
(Add TargetOSVersion to driver inf files)
- Resolves: bz#1328275
(virtio-win doesn't provide windows 10 drivers within vfd [rhel-7.3])
- Resolves: bz#1334736
(On the LAN network, as long as the VMs receive the Network message, and will always blue screen.)
- Resolves: bz#1336368
([virtio-win][viostor][virtio1.0]Cannot enlarge/shrink disk with virtio1.0 device)
- Resolves: bz#1339175
([NetKVM] Turn on RSC feature in NetKVM driver)
- Resolves: bz#1340571
(Add Windows 2k16 drivers to virtio-win)
- Resolves: bz#1352432
([virtio-win][vioscsi]Win2012-64&R2 guest occurred bsod(d1) when whql test DPWLK- Hot-Replace - Device Test - Verify driver support for D3 power state)
- Resolves: bz#1352517
([virtio-win][balloon][whql]windows guest BSOD when run several WHQL jobs)
- Resolves: bz#1352809
([virtio-win][viorng]wrong dervier version for virtio-win-prewhql-121)
- Resolves: bz#1356363
([virtio-win][viorng] cannot install viorng driver on win2008-32/64 (build 122) )
- Resolves: bz#1358125
(Virtio 1.0 driver didn't work on win10 with q35 machine type)
- Resolves: bz#1359072
([virtio-win][netkvm][whql]many whql jobs occurred BSOD(DRIVER_VERIFIER_DETECTED_VIOLATION (c4)) on build 122)
- Resolves: bz#1361501
([virtio-win][balloon] report "VCRUNTIME120.dll is missing from your computer"error when using blnsvr.exe)
(fixed commit 7b7a940fdf )
Add Windows 10 drivers to .vfd files (bz#1328275)
Updates copyright notice in virtio-win_license.txt file to 2016 (bz#1303511)
- Resolves: bz#1328275
(virtio-win doesn't provide windows 10 drivers within vfd)
- Resolves: bz#1303511
(update copyright of license.txt file in virtio-win-1.7.5-0.el6 to 2016)
Updates copyright notice in virtio-win_license.txt file to 2016 (bz#1303511)
- Resolves: bz#1328275
(virtio-win doesn't provide windows 10 drivers within vfd)
- Resolves: bz#1303511
(update copyright of license.txt file in virtio-win-1.7.5-0.el6 to 2016)
Drop /vioscsi/w10/amd64/vioscsi.DVL.XML which was included
by mistake.
See the changelog entry for 1.8.0-1 for a full
description of the changes in this release.
- Resolves: bz#1217644
(use hardlinks for .iso and /usr/share/virtio-win/drivers)
Update virtio-win-1.8.0-for-rpm.tar.gz with the latest
signed drivers. This corrects packaging mistakes that put
drivers into the wrong directories; there are no new
bugfixes.
See the changelog entry for 1.8.0-1 for a full
description of the changes in this release.
- Resolves: bz#1217644
(use hardlinks for .iso and /usr/share/virtio-win/drivers)
The virtio-win-VVV-bin-for-rpm.zip file was previously a
zip file. This has been switched to a .tar.gz file which
provides better compresion and support for hard links.
- Resolves: bz#1217644
(use hardlinks for .iso and /usr/share/virtio-win/drivers)
- The virtio-win-1.8.0-1 release contains:
- support for Windows 10
- a new driver (pvpanic)
- Bugfixes and improvements (see below for bugzilla list)
- The drivers contained in this release are:
- pvpanic build 103
- Balloon build 105
- viorng build 105
- viostor build 106
- NetKVM build 105 (Windows Server 2008) and build 110 (all others)
- vioser build 108
- vioscsi build 102
- Also included in this release are:
- qemu guest agent 7.0-10
- qxl 0.1-24
This release addresses the following BZs:
- Solves: bz#996479
(RFE:pvpanic driver for windows guest)
- Solves: bz#1010887
([virtio-win][balloon] Guest display did not show properly after hibernate guest(s4)& resume after enlarging memory during runtime)
- Solves: bz#1017817
(copying of 10+ MB plaintext from guest through spice clipboard to client results in: vio_serial write completion error 554)
- Solves: bz#1037949
([virtio-win][viostor]guest bsod(9F) when do s4 while guest running iozone)
- Solves: bz#1054640
([virtio-win][netkvm]windows 8.1 x86 BSOD on DRIVER_POWER_STATE_FAILURE (9f))
- Solves: bz#1058115
([whql][netkvm]win2k8-32 BSOD with code 9F when run WLK job "Ethernet - NDISTest 6.5 (MPE)")
- Solves: bz#1058121
([whql][netkvm]win2k8-32 BSOD with 7E code when run WLK job "Ethernet - NDISTest 6.5 (MPE)")
- Solves: bz#1058225
([WHQL][netkvm]Job named PM_PowerStateTransition failed because error pop up while test app's running on win8/win8.1)
- Solves: bz#1067249
([virtio-win][balloon]Balloon device can not be removed after blnsrv service installed)
- Solves: bz#1085702
([WHQL][netkvm][macvtap][1 machine]OffloadRsc failed on win2012 and win8-64 guest)
- Solves: bz#1096505
([NetKVM] Implement multiqueue support in Windows guest driver)
- Resolves: bz#1098876
([virtio-win][netkvm]netkvm driver can not be installed on win8-64 guests)
- Solves: bz#1100308
([NetKVM] Race condition in handling device stop)
- Solves: bz#1103100
([virtio-win][netkvm]netkvm driver can not be load in win2008 guest)
- Solves: bz#1106400
([whql][netkvm]NDISTest 6.5 - [2 Machine] - OffloadLSO failed)
- Solves: bz#1109027
([virtio-win][netkvm]Name field is empty when using netsh command)
- Solves: bz#1110129
([virtio-win][scsi]scsi driver can not be installed automately via pnputil)
- Solves: bz#1111051
([virtio-win][netkvm]win7-32 guest bsod(8e) while performing long (several hours) netperf transfer with mq=on)
- Resolves: bz#1112712
([virtio-win][netkvm]win8.1 32bit BSOD when loading virtio-win-prewhql-0.1 driver & indirect_desc=off option of virtio-net-pci)
- Resolves: bz#1119966
([whql][netkvm][RHEL6]guests bsod (0xd1) when running job "NDISTest 6.5 - [1 Machine] - StandardizedKeywords")
- Solves: bz#1121338
([WHQL][netkvm]NDISTest 6.5 - 2 Machine - OffloadChecksum failed via bridge on hck)
- Solves: bz#1123288
([virtio-win][netkvm]BOSD occurs during guest reboot after disable nic when netserver running)
- Solves: bz#1125796
("Guest moved used index from 10122 to 10253" when reboot win2012R2 guest with 129 virtio-scsi target)
- Solves: bz#1126378
([virtio-win][vioscsi][rhel6]win2012 guest bsod(d1) when shutdown guest with multi virtio-scsi devices on the same scsi controller)
- Solves: bz#1136023
([NetKVM] Google patches broke debug compilation of NetKVM driver)
- Solves: bz#1136602
([whql][netkvm]Guest (64 bits Operating System) got BSOD (DRIVER_VERIFIER_DETECTED_VIOLATION) while run some jobs)
- Solves: bz#1136606
([whql][netkvm]guests bsod(7E) when running job "NDISTest 6.0 - [1 Machine] - 1c_FaultHandling")
- Solves: bz#1140447
([virtio-win][viorng]should use uniformed name for WDFCoinstallerXXX.dll)
- Solves: bz#1142737
([virtio-win][netkvm]interface status is '2', but expect status is '7' after set_link NIC off)
- Solves: bz#1147202
([virtio-win][WHQL][netkvm]Job named by InvalidPackets induce win81-32/64 to hang up.)
- Solves: bz#1147203
([virtio-win][whql][netkvm]win2k8-64 bsod(7e) when run job "Ethernet - NDISTest 6.0")
- Solves: bz#1147239
(NetKVM with 2012R2 fails the HCK tests)
- Solves: bz#1154419
(NetKVM fails HCK test for 2008R2, single CPU)
- Solves: bz#1154420
(ParaNdis6_SendNetBufferList should dispatch each net buffer to a separate queue)
- Solves: bz#1154435
([NetKVM] Incorrect message id assignment and queue allocation)
- Solves: bz#1155891
([whql][netkvm]Job MPE failed while job was running on win2008R2 because of bsod (0A) on build 93 - 4 vcpus)
- Solves: bz#1155910
([whql][netkvm]Job MPE failed while job was running on win2008R2 because of bsod (D1) on build 93 - 1 vcpus)
- Resolves: bz#1156259
(Win7-64 guest BSOD(0x000000A0) when doing s4)
- Solves: bz#1157241
([NetKVM] Uninitialized reserved field in procNumber structure)
- Solves: bz#1159732
([virtio-win][vioscsi]guest shutdown instead of S3/S4 while doing S3/S4 in guest)
- Resolves: bz#1159754
([virtio-win][netkvm]Nic device doesn't work when guest is running in IRQ mode)
- Solves: bz#1167539
(win8.1.32 guest BSOD with error ' MEMORY_MANAGEMENT)
- Solves: bz#1167614
(win8.1.32 guest BSOD with error 'DRIVER_IRQL_NOT_LESS_OR_EQUAL' (netkvm.sys))
- Solves: bz#1168119
([virtio-win][netkvm]win8.1.64 guest BSOD with error 'DRIVER_IRQL_NOT_LESS_OR_EQUAL' (netkvm.sys) after first reboot during os installation on AMD host)
- Solves: bz#1168483
([virtio-win][netkvm]guest lost ip when change MTU between 500 and 575 via device manage)
- Solves: bz#1168784
([virtio-win]win2012r2 guest shows black screen with error code "0x0000005c" after migration and reboot)
- Solves: bz#1169673
([virtio-win][netkvm]qemu quit with "qemu-kvm: Guest moved used index from 0 to 257" when set MaxRxBuffers to 512/1024 in guest)
- Solves: bz#1169718
(CVE-2015-3215 [NetKVM] Malformed packet can cause BSOD [rhel-7.2])
- Solves: bz#1170106
(RFE: [virtio-win][qxl-win] Add windows 2008R2 QXL to the .vfd)
- Solves: bz#1172920
([virtio-win][vioser]winxp guest bsod with D1 code when shutdown guest after hotunplug/hotplug serial port and serial pci)
- Solves: bz#1173323
(iperf stalls the NetKVM driver)
- Solves: bz#1177063
([virtio-win][balloon]guest can't s3/s4 correctly if disable guest-stats-polling while balloon service running)
- Solves: bz#1183423
(Change the copyright on all the Windows drivers to "2015" in virtio-win-prewhql build)
- Solves: bz#1184430
(enable event index feature in Windows virtio-blk driver)
- Resolves: bz#1184818
(guest BSOD when reboot guest after enable qxl driver verifier)
- Solves: bz#1188790
(NetKVM driver crashed on pausing in MPE test)
- Solves: bz#1190968
([whql][netkvm][mq]job "NDISTest 6.0 - [1 Machine] - 1c_Mini6RSSOids" last for hours and never stop w/ 4 queues)
- Solves: bz#1191836
([whql][netkvm][mq]job "NDISTest 6.5 - [2 Machine] - GlitchFreeDevice" failed due to "not received the expected number of packets" w/ 4 queues)
- Solves: bz#1195487
(Windows guest performing out-of-bounds accesses on virtio device)
- Resolves: bz#1195920
(Windows 2012 R2 using virtio-scsi driver with Direct LUNs causes BSODs)
- Solves: bz#1210208
(CVE 2015-3215 [NetKVM] Malformed packet can cause BSOD [rhel-7.2])
- Resolves: bz#1212392
(need to do extra Refresh work when initiate virtio-blk disk while boot guest with OVMF)
- Solves: bz#1217642
(QXL XDDM is not shipped on the virtio-win ISO)
- Resolves: bz#1217644
(use hardlinks for .iso and /usr/share/virtio-win/drivers)
- Solves: bz#1217799
(Distribute *.oem, LICENSE, COPYING in -prewhql build)
- Resolves: bz#1218449
(Ship qemuserial.cat on the iso)
- Solves: bz#1218937
(QEMU Guest Agent VSS Provider is not started after guest tools install)
- Solves: bz#1227164
(viostor/vioscsi is not digital signed by Redhat)
- Resolves: bz#1228967
([virtio-win][whql][viostor]job "Flush Test" failed on all guests with build 105)
- Correct NVR of virtio-win-prewhql-build
- Resolves: bz#1183423 [rhel-7.2.0]
(Change the copyright on all the Windows drivers to "2015" in virtio-win-preqhql build)
- Resolves: bz#1195920 [rhel-7.2.0]
(Windows 2012 R2 using virtio-scsi-driver with Direct LUNs causes BSODs)
- Resolves: bz#1210208 [rhel-7.2.0]
([NetKVM] Malformed packet can cause BSOD)
- Correct NVR of virtio-win-prewhql-build
- Resolves: bz#1183423 [rhel-7.2.0]
(Change the copyright on all the Windows drivers to "2015" in virtio-win-preqhql build)
- Resolves: bz#1195920 [rhel-7.2.0]
(Windows 2012 R2 using virtio-scsi-driver with Direct LUNs causes BSODs)
- Resolves: bz#1210208 [rhel-7.2.0]
([NetKVM] Malformed packet can cause BSOD)
- Resolves: bz#1183423 [rhel-7.2.0]
(Change the copyright on all the Windows drivers to "2015" in virtio-win-preqhql build)
- Resolves: bz#1195920 [rhel-7.2.0]
(Windows 2012 R2 using virtio-scsi-driver with Direct LUNs causes BSODs)
- Resolves: bz#1210208 [rhel-7.2.0]
([NetKVM] Malformed packet can cause BSOD)
Signed-off-by: Jeff E. Nelson <jen@redhat.com>
This should not change the installed contents of the RPM. This is just
reorganizing things to use the new scripts as documented here:
https://mojo.redhat.com/docs/DOC-1011301
The dist-git push hook refuses to allow commits through unless
they reference a valid BZ. These changes are organizational in
nature and have no BZ, but they are prerequisite for the next
commit, so use the same BZ references.
- Resolves: bz#1183423 [rhel-7.2.0]
(Change the copyright on all the Windows drivers to "2015" in virtio-win-preqhql build)
- Resolves: bz#1195920 [rhel-7.2.0]
(Windows 2012 R2 using virtio-scsi-driver with Direct LUNs causes BSODs)
- Resolves: bz#1210208 [rhel-7.2.0]
([NetKVM] Malformed packet can cause BSOD)
Signed-off-by: Jeff E. Nelson <jen@redhat.com>
