e61cab0b1e
- The virtio-win-1.9.0-1 release contains: - support for Windows 2016 - Bugfixes and improvements (see below for bugzilla list) - The drivers contained in this release are: - pvpanic build 121 - Balloon build 125 - viorng build 125 - viostor build 125 (Win 10 and 2016) and 126 (all others) - NetKVM build 126 - vioser build 125 (Win 10 and 2016) and 126 (all others) - vioscsi build 124 - Also included in this release are: - qemu guest agent 7.3.2-1 - qxl 0.1-24 This release addresses the following BZs: - Resolves: bz#950611 ([NetKVM] Pass WHQL tests with RSC feature enabled ) - Resolves: bz#954183 ([NetKVM] Static driver verifier fails with NetKVM ) - Resolves: bz#1013336 ([virtio-win][netkvm] BSoD occurs when running NDISTest6.5 -[2 Machine] - MPE_Ethernet job on windows 2012 (Win10)) - Resolves: bz#1122364 ([virtio-win][vioser][rhel6]win2k8r2 guest bsod(7e) when do continuous hotplug/unplug during virtio serial in use with driver verifier enabled) - Resolves: bz#1157987 (Windows hangs at startup if virtio-scsi device is configured with vectors=1, 2, and 3) - Resolves: bz#1161453 ([whql][vioscsi]Job named by SCSI Compliance Test (LOGO) failed on win2k8-R2 and win8-64 guest) - Resolves: bz#1190960 ([whql][netkvm][mq]job failed due to "Received some net buffer lists out of order" w/ 4 queues) - Resolves: bz#1208465 (Windows guest boots up slowly with multiple virtual NIC devices (I attached 232 with mutifunction=on)) - Resolves: bz#1210166 ([vioscsi] Add multiqueue support to Windows virtio-scsi driver.) - Resolves: bz#1214177 ([virtio-win] [NetKVM] Compilation errors with Visual Studio 2015 while trying to compile NetKVM) - Resolves: bz#1214568 ([RFE][virtio-win] Add WMI facility to check the virito-scsi mq enabled) - Resolves: bz#1219841 ([RFE] vioscsi.sys should support MS Cluster Services) - Resolves: bz#1223426 ([NetKVM] Performance degradation with multi-queue) - Resolves: bz#1234741 ([virtio-win][vioscsi]win2012 guest bsod(c9) when whql test DPWLK-HotAdd(1104) job) - Resolves: bz#1234751 ([virtio-win][vioscsi]win2012R2 guest bsod(d1) when whql test DPWLK-HotAdd(1104) job) - Resolves: bz#1235108 ([virtio-win][vioscsi]VIOSCSI driver is not signed by redhat certification on win200832/64 platform) - Resolves: bz#1237024 ([virtio-win][netkvm]ipv6 uploading speed is quite slow when set "TCP/UDP checksum offload(IPv6)" to "Rx & Tx Enabled") - Resolves: bz#1241986 (win7 64bit BSOD when booting it on RHEL7.2 host) - Resolves: bz#1243229 ([virtio-win][scsi][windows 10]win10 and win2016 guests bsod with D1 when run job "Bus Reset Test") - Resolves: bz#1245957 ([WHQL][viostor][data-plane]it could not generate dump file on WIN2008-32/64 via WLK while running Crash Dump job) - Resolves: bz#1246993 ([virtio-win][svvp][ws2016] job "Signed Driver Check (CheckLogo)" failed during ws2016 svvp test) - Resolves: bz#1247006 ([virtio-win][svvp][ws2016] job "Profile Interrupt Test" failed during ws2016 svvp test) - Resolves: bz#1248873 ([whql][netkvm]Job named NDISTest6.5-InvalidPackets failed with HCK on win8-32/win8-64(build 106)) - Resolves: bz#1248977 ([virtio-win][vioscsi] Cannot install vioscsi driver on win7-32&win2008-32) - Resolves: bz#1249867 ([WHQL][vioscsi]Job hangs and it cannot continure on windows2008 guest via WLK) - Resolves: bz#1250854 ([WHQL][vioscsi]The job named crash dump failed on windows 2008 -32/64 platform) - Resolves: bz#1256583 (Win10 guest can't get ip address from dhcpserver when add mrg_rxbuf=off for virtio-net-pci) - Resolves: bz#1266340 ([whql][netkvm]NDISTest6.5 Manual test failed and generate dump file on windows 2008 guest) - Resolves: bz#1270149 ([virtio-win][netkvm] Check guest network link status of virtio nic with status=on failed (build 110)) - Resolves: bz#1289406 ([virtio-win][vioser] Cannot install vioser driver successfully) - Resolves: bz#1292788 ([virtio-win][viostor] Cannot install viostor driver on win7-64&win2008-64&win2008R2) - Resolves: bz#1293042 ([virtio-win][vioser] Extra '-' (dash) in serial driver name) - Resolves: bz#1293249 ([virtio-win][vioser] IOCTL_GET_INFORMATION does not return required buffer size) - Resolves: bz#1296092 ([virtio-win][balloon] balloon driver can not be installed automately via pnputil) - Resolves: bz#1303511 (update copyright of license.txt file in virtio-win to 2016) - Resolves: bz#1303809 (provide QEMU guest agent command for setting root/administrator account password - window guests) - Resolves: bz#1303988 ([virtio-win] [virtio-1] [RFE] Add Virtio-1.0 support for NetKVM) - Resolves: bz#1304041 ([virtio-win] [virtio-1] [RFE] Add Virtio-1.0 support for vioserial) - Resolves: bz#1304044 ([virtio-win] [virtio-1] [RFE] Add Virtio-1.0 support for vioscsi) - Resolves: bz#1304049 ([virtio-win] [virtio-1] [RFE] Add Virtio-1.0 support for viostor) - Resolves: bz#1313243 ([virtio-win][netkvm][rhel6]win2008-32 guest bsod with HARDWARE_INTERRUP_STORM(f2) when running netperf for longevity test) - Resolves: bz#1313887 ([RFE] provide QEMU guest agent command for setting root account password (Windows guest) [rhel-7.3]) - Resolves: bz#1315984 ([virtio-win] [virtio-1] [RFE] Add Virtio-1.0 support for baloon) - Resolves: bz#1315985 ([virtio-win] [virtio-1] [RFE] Add Virtio-1.0 support for rng) - Resolves: bz#1321774 ([virtio-win][vioscsi]fio jobs keep printing "0% done" in win2012r2 guest) - Resolves: bz#1325078 (Add TargetOSVersion to driver inf files) - Resolves: bz#1328275 (virtio-win doesn't provide windows 10 drivers within vfd [rhel-7.3]) - Resolves: bz#1334736 (On the LAN network, as long as the VMs receive the Network message, and will always blue screen.) - Resolves: bz#1336368 ([virtio-win][viostor][virtio1.0]Cannot enlarge/shrink disk with virtio1.0 device) - Resolves: bz#1339175 ([NetKVM] Turn on RSC feature in NetKVM driver) - Resolves: bz#1340571 (Add Windows 2k16 drivers to virtio-win) - Resolves: bz#1352432 ([virtio-win][vioscsi]Win2012-64&R2 guest occurred bsod(d1) when whql test DPWLK- Hot-Replace - Device Test - Verify driver support for D3 power state) - Resolves: bz#1352517 ([virtio-win][balloon][whql]windows guest BSOD when run several WHQL jobs) - Resolves: bz#1352809 ([virtio-win][viorng]wrong dervier version for virtio-win-prewhql-121) - Resolves: bz#1356363 ([virtio-win][viorng] cannot install viorng driver on win2008-32/64 (build 122) ) - Resolves: bz#1358125 (Virtio 1.0 driver didn't work on win10 with q35 machine type) - Resolves: bz#1359072 ([virtio-win][netkvm][whql]many whql jobs occurred BSOD(DRIVER_VERIFIER_DETECTED_VIOLATION (c4)) on build 122) - Resolves: bz#1361501 ([virtio-win][balloon] report "VCRUNTIME120.dll is missing from your computer"error when using blnsvr.exe) |
||
|---|---|---|
| .gitignore | ||
| README.rhpkg | ||
| sources | ||
| virtio-win.spec | ||
The virtio-win RPM build process is described in detail here: https://mojo.redhat.com/docs/DOC-1011301 Please keep in mind that the RPM spec file is largely shared with the public Fedora drivers. If any changes are made to the spec file content, please submit a patch to the git repo listed in the .spec file.