It is boring that internal result is shown in the terminal. Do not print
anything to standard output by using the command "grep -q".
Signed-off-by: Minfei Huang <mhuang@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: WANG Chao <chaowang@redhat.com>
In ssh or raw dump case, if user do not specify "core_collector" in
kdump.conf, kdump will fail. Because global DEFAULT_CORE_COLLECTOR
variable isn't applied to CORE_COLLECTOR. Now fix it and clean up the
duplicate code in kdump.sh.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
I forgot to add kdump.sysconfig.ppc64le to "Source" directive to
kexec-tools.spec. And on ppc64le, the default kdump.sysconfig will be
installed to /etc/sysconfig/kdump. Now fix it.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
get_option_value() is used to get the value of $1 configured in
/etc/kdump.conf. But when we use "get_option_value ssh", it can get the
value of "sshkey" instead of "ssh".
Fix the regexp pattern to get an exact match.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Previously for solving static route issues, all routes which go
through a specific dev will be saved in 1st kernel, and then added
in 2nd kernel. Because we use below search pattern, an exception
will happen:
/sbin/ip route show | grep -v default | grep "^[[:digit:]].*via.* $_netdev"
That exception is a corner case which happened when 2 machines connected
directly by cable and the 2 network interfaces are configured in
different network subnets. E.g there are 2 machines A and B:
A:ens10 < ------ > B:ens9
A:ens10 inet 192.168.100.111/24 scope global ens10
route need be added in A:
192.168.110.0/24 dev ens10
B:ens9 inet 192.168.110.222/24 scope global ens9
route need be added in B
192.168.100.0/24 dev ens9
Now if A want to dump to B, the route "192.168.110.0/24 dev ens10"
has to be saved and added in 2nd kernel.
So in this patch "ip route get to $target" command is executed, then
an exact route can be got for going to that target. By this, static
route works and the corner case can be fixed too.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Marc Milgram <mmilgram@redhat.com>
Acked-by: WANG Chao <chaowang@redhat.com>
With fadump support, dracut-kdump.sh script is installed into default
initrd to capture vmcore generated by firmware assisted dump. Thus in
fadump case, the same initrd is being used for normal boot as well as
boot after system crash. Hence a device node, added by firmware while
system crashes, is checked to identify if it is a normal boot or boot
after crash to determine whether or not capture vmcore. While testing
fadump in fedora21 alpha, observed that vmcore capture is initiated
even during normal boot, inspite of this check, with the below error:
"kdump.sh[451]: /bin/kdump.sh: line 5: return: can only `return'
from a function or sourced script"
The below patch tries to fix this issue.
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Acked-by: WANG Chao <chaowang@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Remove this package and put eppic_makedumpfile.so and its sample
scripts in kexec-tools package.
makedumpfile does dlopen() on eppic_makedumpfile.so and that does not
enforce any choice. One could either ship it in kexec-tools package or
in a subpackage. Both will work.
The real reason was that code for eppic_makedumpfile.so
(extension_eppic.c) and some eppic scripts are in upstream makedumpfile
project. And that project is distributed as part of kexec-tools package.
Now breaking down that makedumpfile in two parts and shipping all
eppic specific bits in a separate subpackage was creating confusion
everytime we did some changes.
So to avoid that confusion and to keep all of the makedumpfile related
bits in a single package, this change is being done.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
By default on powerpc platform, kvm will reserve a relatively large CMA
(128M aligned) at early boot. In kdump kernel, even KVM sounds useless
but still it reserves 128M and makes kdump kernel fail to boot.
Now fix this by adding the following to kernel command line:
"kvm_cma_resv_ratio=0"
which disable the CMA reservation.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
In case of iscsi boot, kernel cmdline will contain ip=xxx kernel
parameter for dracut setting up iscsi root in initramfs. For example:
"root=xxx ip=192.168.3.26:::255.255.255.0:localhost.localdomain:eno19:none ..."
dracut doesn't allow duplicate ip conf for the same network card. dracut
will not ignore the either of the duplicate. Instead, it refuses to
continue:
[ 15.876306] dracut: FATAL: For argument 'ip=192.168.3.26:::255.255.255.0:localhost.localdomain:eno19:none'\n
Duplication configurations for 'eno19'
[ 16.055513] dracut: Refusing to continue ev argument for multiple ip= lines
That's why in our code we don't add a duplicate ip conf when handling
the same network card the second time. But we never consider the case
that ip conf is already added in kernel cmdline for some special
purpose, for example, iscsi boot.
Now we also look up /proc/cmdline for ip conf. If it exists, we use the
existing one. The existing one should work out of box because dracut
will handle it in second kernel like it does for first kernel. That
said, the network card will be brought up and root disk will be mounted
under /sysroot.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
kexec-tools expects "powerpc64le" to pass to configure.ac, while we
passed ppc64le. Otherwise the build fails. Now fix it like we did for
ppc64.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
kdump.sysconfig.ppc64le is copied from kdump.sysconfig.ppc64. The
default sysconfig won't work for ppc64le.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Previously if a target need mount info, the relevant mount options
are got from /proc/mounts by below command:
findmnt -k -f -n -r -o OPTIONS $_dev
This will bring problems. Since /proc/mounts will give out a set
which contains each option. Some options have value specified by
user, some options just have default value if user doesn't specify.
If some mount options are not supported very well, bugs occured.
The more options, the worse.
So in this patch, we try to check fstab to get mount options firstly,
this give user a chance to decide which options they really want.
If they don't give a fstab entry, then we trust all options in
/proc/mounts.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Upstream makedumpfile contains some sample eppic scripts for reference.
Now pull the whole scripts directory into kexec-tools-eppic package.
Signed-off-by: WANG Chao <chaowang@redhat.com>
This patch changes restart of kdump service from cpu online/offline events
to cpu add/remove events.
Some people have complained that they are running cpu online/offline tests
at high frequency and kdump restarts at high frequency and systemd disables
the service. As a temporary fix, we committed a patch to never disable
kdump service.
In general it probably is a good idea to restart kdump service on cpu
add/remove events.
Toshi Kani confirmed following.
- File for /sys/devices/system/cpu/cpuX/crash_notes will be created first
before ADD event goes out. That means we can not miss creating EFL notes
for newly created cpu.
- For REMOVE event files under /sys/devices/system/cpu/cpuX/ are removed
first and then REMOVE event goes out. That means we will remove the elf
note header for removed cpu.
- There are some race conditions like a cpu is removed but system crashes
before kdump service restarts. In that case vmcore.c has to be more robust
to be able to inspect elf notes and discard empty ones.
Also it is possible that after cpu remove, crash notes memory got reused
for something else and after crash vmcore.c might see some random data.
It does basic size checks and discards elf notes if checks don't pass.
Above rance conditions can happen even with OFFLINE event and there is
no good way to remove these altogether. So making vmcore.c more robust
is the right solution here.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: WANG Chao <chaowang@redhat.com>
Backport the following commit from kexec-tools upstream:
commit 45b33eb
Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Date: Fri Jul 25 17:07:49 2014 +0200
ppc64/kdump: Fix ELF header endianess
The ELF header created among the loading of the kdump kernel should be
flagged using the current endianess and not always as big endian.
Without this patch the data exposed in /proc/vmcore are not readable when
running in LE mode.
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
This is part of the work to enable ppc64le.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Backport the following commit from upstream kexec-tools:
commit 335bad7
Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Date: Tue Jul 22 18:22:28 2014 +0200
kexec/ppc64: disabling exception handling when building the purgatory
Some Linux distributions would like to turn on the GCC exception handling
by default. As this option introduces symbols in the built code that are
defined in a separate shared library, this is not a good idea to have such
an option activated when building the purgatory.
This patch forces the exception handling to be turned off when building the
purgatory on ppc64 BE and LE.
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
This is part of the work to enable ppc64le.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Backport the following commit from upstream kexec-tools:
commit 2ca2203
Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Date: Mon Jun 16 14:42:43 2014 +0200
kexec/ppc64: move to device tree version 17
Kernel commit e6a6928c3ea1d0195ed75a091e345696b916c09b changed the way the
device tree is processed in the kernel. Now version 2 is no more supported.
This patch move the version of the device tree generated in ppc64
environment from 2 to 17, allowing to kexec kernel 3.16.
In addition, automates the define of NEED_STRUCTURE_BLOCK_EXTRA_PAD which
should not be set for DT version 16 and above.
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
This is part of the work to enable ppc64le.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Now kexec file based syscall can be used with secureboot enabled machines.
Automatically switch to using new syscall if secureboot is enabled on the
machine.
Also remove the old message where kdump service failed if secureboot is
enabled. That's not the case anymore.
v2:
Renamed "secureboot" to "Secure Boot" in user visible message.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Currently old kexec syscall denies unloading a kernel if secureboot is enabled.
I think this is not right behavior and should be changed. But for now, use
new syscall if secureboot is enabled and that allows unloading kernel.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Does anybody know why are we redirecting stderr to /dev/null when using
kexec load/unload commands? This sounds wrong to me. In case of error I
have no idea what went wrong.
Systemctl already puts all the information in journal. So if we are worried
that user will be bombarded with error messages, that should not be a concern.
So do not redirect stderr to /dev/null.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
This is a back port from upstream.
commit 046d1755d2bd723a11a180c265e61a884990712e
Author: Vivek Goyal <vgoyal@redhat.com>
Date: Mon Aug 18 11:22:32 2014 -0400
kexec: Provide an option to use new kexec system call
Hi,
This is v2 of the patch. Since v1, I moved syscall implemented check littler
earlier in the function as per the feedback.
Now a new kexec syscall (kexec_file_load()) has been merged in upstream
kernel. This system call takes file descriptors of kernel and initramfs
as input (as opposed to list of segments to be loaded). This new system
call allows for signature verification of the kernel being loaded.
One use of signature verification of kernel is secureboot systems where
we want to allow kexec into a kernel only if it is validly signed by
a key system trusts.
This patch provides and option --kexec-file-syscall (-s), to force use of
new system call for kexec. Default is to continue to use old syscall.
Currently only bzImage64 on x86_64 can be loaded using this system call.
As kernel adds support for more arches and for more image types, kexec-tools
can be modified accordingly.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Since we have added kdump anaconda addon, thus removing firstboot module
User can setup kdump in anaconda install phase, and change the kdump.conf
details in s-c-kdump
Delete the firstboot po files as well.
Signed-off-by: Dave Young <dyoung@redhat.com>
Bao noticed the following systemd warning:
systemd[1]: [/usr/lib/systemd/system/emergency.service:17] Executable path is
not absolute, ignoring: systemctl --no-block isolate kdump-error-handler.service
It turns out that now systemd doesn't allow relative path for an executable, we
must adapt that, make the change.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Tested-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Resolves: rhbz#1131169
Zbigniew (systemd developer) pointed out that our udev rules should
install to /usr/lib/ not /etc. Because /etc is supposed to be used by
sysadmins only and package should install by default into /usr/lib.
As advised here:
http://www.freedesktop.org/software/systemd/man/udev.html#Rules%20Files
Signed-off-by: WANG Chao <chaowang@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Node could be referenced by short hostname (hostname -s) in cluster
configuration:
[root@virt-068 /]# pcs status nodes
Pacemaker Nodes:
Online: virt-066 virt-067 virt-068
Standby:
Offline:
We didn't know it before. Martin noticed the kdump failure, and provide
this fix. Thanks to Martin.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Tested-by: Martin Juricek <mjuricek@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Since we've use systemd to control the shutdown path, there's not need
for us to unmount the filesystem, systemd will do that for us just like
it does in a normal boot.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
It's more safe to use systemd (init) to control the shutdown path for us
in either reboot or power off or halt action.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
When there's no kdump initramfs for lsinitrd to inspect with, there will
be an error:
# kdumpctl start
/boot/initramfs-3.16.0-rc7+kdump.img does not exist
Usage: lsinitrd [options] [<initramfs file> [<filename> [<filename> [...] ]]]
Usage: lsinitrd [options] -k <kernel version>
-h, --help print a help message and exit.
-s, --size sort the contents of the initramfs by size.
-m, --mod list modules.
-f, --file <filename> print the contents of <filename>.
-k, --kver <kernel version> inspect the initramfs of <kernel version>.
No kdump initial ramdisk found.
Rebuilding /boot/initramfs-3.16.0-rc7+kdump.img
[..]
In addition, lsinitrd is a slow operation. We only run it when it's
fadump mode, to speed up in kdump mode.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
If one target address is not local and its route is different than
default gateway, the specific route to this target address need be
added. E.g, target is 192.168.200.222.
sh> ip route show
default via 192.168.122.1 dev eth0 proto static metric 1024
192.168.200.0/24 via 192.168.100.222 dev ens10 proto static metric 1
In this patch, get the route to the specific target address and store
it as cmdline, here is /etc/cmdline.d/45-route-static.conf. And the
route options are separated by semicolon like below. Then the stored
route can be parsed when kdump kernel boot up.
192.168.200.0/24:192.168.100.222:ens10
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
In fadump, in case of failure while rebuilding initrd, the error status
is not handled properly. See code snippet below:
$MKDUMPRD $target_initrd_tmp --rebuild $TARGET_INITRD --kver $kdump_kver \
-i /tmp/fadump.initramfs /etc/fadump.initramfs
rm -f /tmp/fadump.initramfs
if [ $? != 0 ]; then
echo "mkdumprd: failed to rebuild initrd with fadump support" >&2
return 1
fi
This patch fixes this issue
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
This patch introduce a new kdump-capture.service which is used to run
kdump.sh.
kdump-capture.service has OnFailure=emergency.target and
OnFailureIsolate=yes set. When kdump.sh fails, the kdump emergency
service will be triggered and enter the error handling path.
In 2nd kernel, the default target for systemd is initrd.target, so we
put kdump-capture.service in initrd.target.wants/ and by that, system
will start kdump-capture as part of the boot process.
kdump.sh used to run in dracut-pre-pivot hook. Now kdump-capture.service
is placed after dracut-pre-pivot.service and other dependencies are all
copied from dracut-pre-pivot.service. So the start point of
kdump.sh will be almost the same as it used to be.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Minfei Huang
WANG Chao
Baoquan He
Hari Bathini
Vivek Goyal
Dave Young
Peter Robinson