It's basically same with is_user_configured_dump_target and only have
one caller. And the name is confusing, the dump target is always
configured, it's either user configured or path based.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
In /etc/hosts, the alias name can come at the 2nd column, regardless of the
recommendation.
E.g. the following format is valid although not recommended
cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.22.21 fastvm-rhel-7-6-21 fastvm-rhel-7-6-21.localdomain
192.168.22.22 fastvm-rhel-7-6-22 fastvm-rhel-7-6-22.localdomain
192.168.22.21 node1_hb
192.168.22.22 node2_hb
So filtering out both 2nd and 3rd column for matching.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Process substitution is not POSIX standard syntax, so if bash is configured
to strictly follow POSIC, this will fail.
Just use a POSIX friendly syntax instead.
Fixes: bz1708321
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
This help remove redundant spaces and tailing comment in installed
kdump.conf, currently installed kdump.conf always contain extra empty
lines.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
Now modinfo will return "(builtin)" instead of empty string for builtin
module. Sync the code logic.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Since Dracut commit a0d9ad6 loaded-kernel-modules is renamed to
hostonly-kernel-modules and contains all hostonly modules. So check
hostonly-kernel-modules instead for module change.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Latest dracut release stopped creating
$systemdsystemunitdir/initrd.target.wants dir for us, so ensure it
exists before creating the symlink.
Signed-off-by: Kairui Song <kasong@redhat.com>
Tested-and-Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com>
When building kdump initramfs for a SSH dump target, mkdumprd would
check whether it has the write permission on the SSH Server's
$DUMP_TARGET.
However $DUMP_TARGET is missing in the actual error message when the
user doesn't not have the write permission. For example:
# kdumpctl restart
kexec: unloaded kdump kernel
Stopping kdump: [OK]
Could not create temporary directory on :/home/bhsharma/test. Make
sure user has write permission on destination
mkdumprd: failed to make kdump initrd
Starting kdump: [FAILED]
This patch using $1 value passed to mkdumprd, to print the
$DUMP_TARGET inside mkdir_save_path_ssh() function to
fix the issue.
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Currently, is_user_configured_dump_target() doesn't work as expected
due to lack of grep -E option.
As a result, kdump service with a ssh dump configuration can unnecessarily
fail to start due to the non-existence of a directory at where the path
option specifies on the local system:
kdumpctl[9760]: Rebuilding /boot/initramfs-5.4.19-200.fc31.x86_64kdump.img
kdumpctl[9760]: Dump path /var/crash/ssh does not exist.
kdumpctl[9760]: mkdumprd: failed to make kdump initrd
kdumpctl[9760]: Starting kdump: [FAILED]
Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
Acked-by: Kairui Song <kasong@redhat.com>
In order to check whether the specified makedumpfile parameters are
valid or not when generating initramfs, use the --check-params option,
which was recently added.
With the patch, kdumpctl can point out mistakes in core_collector
option and failed. For example, if there is an practical mistake
that dump_level is -1:
# cat /etc/kdump.conf
core_collector makedumpfile -l --message-level 1 -d -1
# kdumpctl start
Detected change(s) in the following file(s):
/etc/kdump.conf
Rebuilding /boot/initramfs-5.4.19-200.fc31.x86_64kdump.img
Dump_level(-1) is invalid.
makedumpfile parameter check failed.
mkdumprd: failed to make kdump initrd
Starting kdump: [FAILED]
Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
Acked-by: Kairui Song <kasong@redhat.com>
Backport from the upstream makedumpfile devel branch.
commit 989152e113bfcb4fbfbad6f3aed6f43be4455919
Author: Kazuhito Hagio <k-hagio-ab@nec.com>
Date: Tue Feb 25 16:04:55 2020 -0500
[PATCH] Introduce --check-params option
Currently it's difficult to check whether a makedumpfile command-line
is valid or not without an actual panic. This is inefficient and if
a wrong configuration is not tested, you will miss the vmcore when an
actual panic occurs.
In order for kdump facilities like kexec-tools to be able to check
the specified command-line parameters in advance, introduce the
--check-params option that only checks them and exits immediately.
Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
Acked-by: Kairui Song <kasong@redhat.com>
(1) explain early kdump a little clearer in "Introduction"
(2) move the notes out to a new "Notes" section for readability and
add a note about need of reconfiguration after kernel update
(3) change journalctl -x option to -b option because -x is unnecessary
and -b will make it very faster if persistent journal is available
(4) shorten the example messages for readability
(5) add a note to "Limitation" about the earliness of early kdump
Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
For step2 in early-kdump-howto.txt, --force option of dracut
is necessary to rebuild system initramfs. Without --force option,
executing step2 fails because system initramfs already exists.
Signed-off-by: Shigeki Morishima <s.morishima@jp.fujitsu.com>
Acked-by: Kairui Song <kasong@redhat.com>
Currently while trying to save vmcore via vlan eth interface, the Kdump
kernel fails with network unreachable message.
This is because mkdumprd produces a vlan config that does not get
ip address for vlan on eth device.
Fix the same via this patch.
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
With FADump support added on POWERNV paltform, enable the scripts to
capture /proc/vmcore. Also, if CONFIG_OPAL_CORE is enabled, OPAL core
is preserved and exported on POWERNV platform. So, offload OPAL core,
if it is available.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Kairui Song <kasong@redhat.com>
UEFI Secure boot is a signature verification mechanism, designed to
prevent malicious code being loaded and executed at the early boot
stage. This makes sure that code executed is trusted by firmware.
Previously, with kexec_file_load() interface, kernel prevents unsigned
kernel image from being loaded if secure boot is enabled. So kdump will
detect whether secure boot is enabled firstly, then decide which interface
is chosen to execute, kexec_load() or kexec_file_load(). Otherwise unsigned
kernel loading will fail if secure boot enabled, and kexec_file_load() is
entered.
Now, the implementation of kexec_file_load() is adjusted in below commit.
With this change, if CONFIG_KEXEC_SIG_FORCE is not set, unsigned kernel
still has a chance to be allowed to load under some conditions.
commit 99d5cadfde2b ("kexec_file: split KEXEC_VERIFY_SIG into KEXEC_SIG
and KEXEC_SIG_FORCE")
And in the current Fedora, the CONFIG_KEXEC_SIG_FORCE is not set, only the
CONFIG_KEXEC_SIG and CONFIG_BZIMAGE_VERIFY_SIG are set on x86_64 by default.
It's time to spread kexec_file_load() onto all systems of x86_64, including
Secure-boot platforms and legacy platforms. Please refer to the following
form.
.----------------------------------------------------------------------.
| . | signed kernel | unsigned kernel |
| . types |-----------------------|-----------------------|
| . |Secure boot| Legacy |Secure boot| Legacy |
| . |-----------|-----------|-----------|-----------|
| options . | prev| now | prev| now | | | prev| now |
| . |(file|(file|(only|(file| prev| now |(only|(file|
| . |load)|load)|load)|load)| | |load)|load)|
|----------------------|-----|-----|-----|-----|-----|-----|-----|-----|
|KEXEC_SIG=y | | | | | | | | |
|SIG_FORCE is not set |succ |succ |succ |succ | X | X |succ |succ |
|BZIMAGE_VERIFY_SIG=y | | | | | | | | |
|----------------------|-----|-----|-----|-----|-----|-----|-----|-----|
|KEXEC_SIG=y | | | | | | | | |
|SIG_FORCE is not set | | | | | | | | |
|BZIMAGE_VERIFY_SIG is |fail |fail |succ |fail | X | X |succ |fail |
|not set | | | | | | | | |
|----------------------|-----|-----|-----|-----|-----|-----|-----|-----|
|KEXEC_SIG=y | | | | | | | | |
|SIG_FORCE=y |succ |succ |succ |fail | X | X |succ |fail |
|BZIMAGE_VERIFY_SIG=y | | | | | | | | |
|----------------------|-----|-----|-----|-----|-----|-----|-----|-----|
|KEXEC_SIG=y | | | | | | | | |
|SIG_FORCE=y | | | | | | | | |
|BZIMAGE_VERIFY_SIG is |fail |fail |succ |fail | X | X |succ |fail |
|not set | | | | | | | | |
|----------------------|-----|-----|-----|-----|-----|-----|-----|-----|
|KEXEC_SIG is not set | | | | | | | | |
|SIG_FORCE is not set | | | | | | | | |
|BZIMAGE_VERIFY_SIG is |fail |fail |succ |succ | X | X |succ |succ |
|not set | | | | | | | | |
----------------------------------------------------------------------
Note:
[1] The 'X' indicates that the 1st kernel(unsigned) can not boot when the
Secure boot is enabled.
Hence, in this patch, if on x86_64, let's use the kexec_file_load() only.
See if anything wrong happened in this case, in Fedora firstly for the
time being.
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
The dracut initqueue may quit immediately and won't trigger any hook if
there is no "finished" hook still pending (finished hook will be deleted
once it return 0).
This issue start to appear with latest dracut, latest dracut use
network-manager to configure the network,
network-manager module only install "settled" hook, and we didn't
install any other hook. So NFS/SSH dump will fail. iSCSI dump works
because dracut iscsi module will install a "finished" hook to detect if
the iscsi target is up.
So for NFS/SSH we keep initqueue running until the host successfully get
a valid IP address, which means the network is ready.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
sed and awk is heavily used everywhere in the code, but it's not
explicitely installed by kdump dracut module. If the module in dracut
stop installing them (which already happened with latest dracut
upstream), kdump will break.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
For ssh/nfs dump, kdump need the 'ip' tool to get the host ip address
for naming the vmcore. But kdump-module-setup.sh never installed this
tool. kdump-module-setup.sh worked so far as dracut network module will
help install it.
After dracut changed to use 35network-manager for network setup, "ip"
command won't be installed in second kernel by default. So need to
ensure "ip" is installed when installing kdump dracut module.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Previously is_nfs_dump_target didn't cover the case that 'path <value>'
where <value> points to a nfs mount point. This function is never used
in first kernel before so so far it worked.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
This help deduplicate the code. Use a single function instead of
repeat the same logic.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Some of echo $(...) code segment is pointless, just call the command
directly, and remove some useless if / return statement.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Previous commit f13eab6 ('mkdumprd: simplify dracut args parsing')
break dracut arguments parsing for some use case, this should fix it
well.
Passed nfs/local/iscsi/ssh dump test, and with extra dracut_argss.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Currently "systemctl --fail --no-block default" will be executed on
kdump-error-handler exit due to the config. This may makes systemd try
to isolate to the default target again.
The execute chain will be like:
initrd.target -> kdump.sh (failed) -> kdump-error-handler.service ->
failure_action -> final_action -> ExecStopPost (go to initrd.target again)
Currently, reboot/shutdown/halt is called by either by executing
failure_action or final_action. So the loop will be stopped. However
nont of the reboot/shutdown/halt call is blocking so it might lead to
race issue.
Just drop the ExecStopPost to fix this potential issue.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Tested-by: HATAYAMA Daisuke <d.hatayama@fujitsu.com>
Previously dracut_args is stored as an array in the shell code,
so we can just pass this array as argument to dracut.
But when trying to append new dracut argument, we have to manually
handle the quotes and spaces to ensure the appended argument is
splitted into array elements in the right way.
This is complex and hard to read or maintain. Instead, just store the
dracut_args as a plain string, and let xargs help parse it and call
dracut.
Simply passing $dracut_args or "$dracut_args" will either let dracut
consider the whole string as a single argument, or loss all the
quotes. xargs can handle it well and cover more corner cases.
Eg. one corner case before, if we have:
dracut_args --mount "/dev/sda1 /mnt/test xfs rw"
Kdump will fail, because the function add_dracut_arg() will wrongly
change the arguments into: (Notice the extra space.)
dracut_args --mount " /dev/sda1 /mnt/test xfs rw"
Instead of fixing it just use xargs instead. Tested with above config
and multiple other dracut_args values.
Resolves: bz1700136
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
By default kernel have vm.zone_reclaim_mode = 0 and large page
allocation might fail as kernel is very conservative on memory
reclaiming. If the page allocation failure is not handled carefully
it could lead to more serious problems.
This issue can be reproduced by change with following steps:
- Fill up page cache use:
# dd if=/dev/urandom of=/test bs=1M count=1300
- Now the memory is filled with write cache:
# free -m
total used free shared buff/cache available
Mem: 1790 184 132 2 1473 1348
Swap: 2119 7 2112
- Insert a module which simply calls "kmalloc(SZ_1M, GFP_KERNEL)" for
512 times: (Notice: vmalloc don't have such problem)
# insmod debug_module.ko
- Got following allocation failure:
insmod: page allocation failure: order:8, mode:0x40cc0(GFP_KERNEL|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0
- Clean up and repeat again with vm.zone_reclaim_mode = 3, OOM is not
observed.
In kdump kernel there is usually only one online CPU and limited memory,
so we set vm.zone_reclaim_mode = 3 to let kernel reclaim memory more
aggresively to avoid such issue.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
When large amount of memory, about 1TB, is removed with DLPAR memory
remove operation, kdump reload could fail due to race condition with
device tree property update. In such scenario, the subsequent kdump
reload requests would also fail as reload() only proceeds if current
load status is active. Since the possibility of this race condition
couldn't be wished away due to the nature of the scenario, workaround
it by proceeding to load even if current load status is not active as
long as kdump service is active, which kdump udev rules already check
for.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Kairui Song <kasong@redhat.com>
If failure_action is shutdown/reboot/halt, final_action is pointless as
the system will be already stopping. And if final_action is different
from failure_action, it will trigger a systemd race problem and cause
unexpected behavior to occur.
So let the error handler stop and exit after performing failure_action
successfully if failure_action is one of shutdown/reboot/halt.
This way, final_action will not be executed.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Merge kdump_setup_netdev into kdump_install_net.
kdump_install_net is a wrapper of calling kdump_setup_netdev, and
it do following three extra things:
1. Sanitize and resolve the hostname
2. Resolve the route to the destination
3. Set the default gateway for once
There is currently only one caller of kdump_setup_netdev, the iscsi
network setup code, and it's doing 1 and 2 by itself. And there should
only be one default gateway in kdump enviroment, so applying 3 here is
fine.
And the comment of kdump_install_net is wrong and obsoleted, update the
comment too.
Just merge kdump_setup_netdev into kdump_install_net and always use
kdump_install_net instead.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
check_size checks if the specified dump path on the ssh target have
enough space. And if the path doesn't exits, it will fail and exit.
mkdir_save_path_ssh should be called first to check if the path
exists, and create the path if it doesn't exits, so the size check
can always work properly.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
In commit a431a7e354 (module-setup: fix 99kdumpbase network dependency),
the statement for OR operation is still wrong.
The OR condition statement should be: if a || b
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
In kdump.conf, if sshkey points to an invalid ssh key, 'kdumpctl restart'
can bail out immediately instead of retry.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
For fadump, this helps to reduce the risk of boot failure, and
may also help speed up the boot by a bit.
For normal kdump, this will delay the dump target mounting, and no
longer depend on systemd to do the mounting job.
And currently there is a failure that caused by some mount handling
bug with kernel and systemd that is failing the system booting:
[FAILED] Failed to mount /kdumproot/home.
See 'systemctl status kdumproot-home.mount' for details.
[DEPEND] Dependency failed for Local File Systems.
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems.
Starting udev Coldplug all Devices...
Starting Create Volatile Files and Directories...
Starting Kdump Emergency...
This patch can bypass it. The fix of root cause is still WIP, but this
patch itself is a nice to have optimization so it's reasonable to do so.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
When trying to setup kdump for fedora-coreos, kdumpctl start fails to
find the correct boot directory since BOOT_IMAGE start with the grub
device name
Signed-off-by: Yuval Turgeman <yturgema@redhat.com>
Print some message during the long wait period to reflect the process.
The message will look like:
Network dump target is not usable, waiting for it to be ready
...
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
