Add a hook to wait for kdump target in initqueue

The dracut initqueue may quit immediately and won't trigger any hook if
there is no "finished" hook still pending (finished hook will be deleted
once it return 0).

This issue start to appear with latest dracut, latest dracut use
network-manager to configure the network,
network-manager module only install "settled" hook, and we didn't
install any other hook. So NFS/SSH dump will fail. iSCSI dump works
because dracut iscsi module will install a "finished" hook to detect if
the iscsi target is up.

So for NFS/SSH we keep initqueue running until the host successfully get
a valid IP address, which means the network is ready.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
This commit is contained in:
Kairui Song 2020-01-09 00:53:41 +08:00
parent 24b00298d0
commit cee618593c
5 changed files with 75 additions and 48 deletions

23
dracut-kdump-wait-for-target.sh Executable file
View File

@ -0,0 +1,23 @@
#!/bin/sh
# only wait if it's kdump kernel
if [ -f /etc/fadump.initramfs ] && [ ! -f /proc/device-tree/rtas/ibm,kernel-dump ]; then
exit 0
fi
. /lib/dracut-lib.sh
. /lib/kdump-lib-initramfs.sh
# For SSH/NFS target, need to wait for the network to setup
if is_nfs_dump_target; then
get_host_ip
exit $?
fi
if is_ssh_dump_target; then
get_host_ip
exit $?
fi
# No need to wait for dump target
exit 0

View File

@ -114,54 +114,6 @@ save_vmcore_dmesg_ssh() {
fi
}
get_host_ip()
{
local _host
if is_nfs_dump_target || is_ssh_dump_target
then
kdumpnic=$(getarg kdumpnic=)
[ -z "$kdumpnic" ] && echo "kdump: failed to get kdumpnic!" && return 1
_host=`ip addr show dev $kdumpnic|grep '[ ]*inet'`
[ $? -ne 0 ] && echo "kdump: wrong kdumpnic: $kdumpnic" && return 1
_host=`echo $_host | head -n 1 | cut -d' ' -f2`
_host="${_host%%/*}"
[ -z "$_host" ] && echo "kdump: wrong kdumpnic: $kdumpnic" && return 1
HOST_IP=$_host
fi
return 0
}
read_kdump_conf()
{
if [ ! -f "$KDUMP_CONF" ]; then
echo "kdump: $KDUMP_CONF not found"
return
fi
get_kdump_confs
# rescan for add code for dump target
while read config_opt config_val;
do
# remove inline comments after the end of a directive.
case "$config_opt" in
dracut_args)
config_val=$(get_dracut_args_target "$config_val")
[ -n "$config_val" ] && add_dump_code "dump_fs $config_val"
;;
ext[234]|xfs|btrfs|minix|nfs)
add_dump_code "dump_fs $config_val"
;;
raw)
add_dump_code "dump_raw $config_val"
;;
ssh)
add_dump_code "dump_ssh $SSH_KEY_LOCATION $config_val"
;;
esac
done <<< "$(read_strip_comments $KDUMP_CONF)"
}
fence_kdump_notify()
{
if [ -n "$FENCE_KDUMP_NODES" ]; then

View File

@ -842,7 +842,9 @@ install() {
kdump_check_iscsi_targets
# nfs/ssh dump will need to get host ip in second kernel and need to call 'ip' tool, see get_host_ip for more detail
# also need to let initqueue wait for target to become ready
if is_nfs_dump_target || is_ssh_dump_target; then
inst_hook initqueue/finished 01 $moddir/kdump-wait-for-target.sh
inst "ip"
fi

View File

@ -201,3 +201,51 @@ do_final_action()
{
eval $FINAL_ACTION
}
get_host_ip()
{
local _host
if is_nfs_dump_target || is_ssh_dump_target
then
kdumpnic=$(getarg kdumpnic=)
[ -z "$kdumpnic" ] && echo "kdump: failed to get kdumpnic!" && return 1
_host=`ip addr show dev $kdumpnic|grep '[ ]*inet'`
[ $? -ne 0 ] && echo "kdump: wrong kdumpnic: $kdumpnic" && return 1
_host=`echo $_host | head -n 1 | cut -d' ' -f2`
_host="${_host%%/*}"
[ -z "$_host" ] && echo "kdump: wrong kdumpnic: $kdumpnic" && return 1
HOST_IP=$_host
fi
return 0
}
read_kdump_conf()
{
if [ ! -f "$KDUMP_CONF" ]; then
echo "kdump: $KDUMP_CONF not found"
return
fi
get_kdump_confs
# rescan for add code for dump target
while read config_opt config_val;
do
# remove inline comments after the end of a directive.
case "$config_opt" in
dracut_args)
config_val=$(get_dracut_args_target "$config_val")
[ -n "$config_val" ] && add_dump_code "dump_fs $config_val"
;;
ext[234]|xfs|btrfs|minix|nfs)
add_dump_code "dump_fs $config_val"
;;
raw)
add_dump_code "dump_raw $config_val"
;;
ssh)
add_dump_code "dump_ssh $SSH_KEY_LOCATION $config_val"
;;
esac
done <<< "$(read_strip_comments $KDUMP_CONF)"
}

View File

@ -50,6 +50,7 @@ Source106: dracut-kdump-capture.service
Source107: dracut-kdump-emergency.target
Source108: dracut-early-kdump.sh
Source109: dracut-early-kdump-module-setup.sh
Source110: dracut-kdump-wait-for-target.sh
Requires(post): systemd-units
Requires(preun): systemd-units
@ -225,6 +226,7 @@ cp %{SOURCE104} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpb
cp %{SOURCE105} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE105}}
cp %{SOURCE106} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE106}}
cp %{SOURCE107} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE107}}
cp %{SOURCE110} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE110}}
chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE100}}
chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE101}}
mkdir -p -m755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump