3.19.5 seems to change the colors of buttons slightly and also
the rendering of checkboxes/radio buttons, they're now placed
somewhat differently relative to their labels.
Summary:
this is following a couple of upstream changes I noticeed while
playing with dump_templates. Upstream has completely got rid of
the 'variables' keys from all dicts, and when you run dump_
templates the output does not contain any 'variables' keys, so
it seems reasonable to ditch these entirely (I think it was some
old thing that got subsumed into 'settings'). Also, when you
run dump_templates the 'prio' values come out in JobTemplates,
not in TestSuites; if you look at load_templates there's a bit
marked "we have to migrate the prio from the TestSuite to the
JobTemplate" which does exactly what it sounds like, so it
seems a good idea to move these instead of relying on that to
always be there.
While I had to re-do all the priorities anyway I tried to clean
them up a bit. The idea is roughly this:
10 - 19: most-critical sanity tests (i.e. default_install)
20 - 29: Alpha tests
30 - 39: Beta tests
40 - 49: Final tests
50+ : Optional tests
within each group I ordered 64-bit first, UEFI second, and
32-bit last (usually just as x0 / x1 / x2).
Test Plan:
Check that the file is valid and loads correctly,
and that everything works more or less the same except the
order of tests run is a bit different.
Reviewers: jskladan, garretraziel
Reviewed By: jskladan, garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D692
Summary:
Apparently it'll be something like anaconda.core.(PID). This
should result in that getting compressed and uploaded only if it
exists.
Test Plan:
Try and hit the Mystery Crasher and see if we get the
damn core file this time.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D688
Summary:
When anaconda manages to actually crash the python interpreter,
there should be a /tmp/anaconda.core containing the core dump
(per clumens, see calls to 'gcore' in isys.c). Let's upload it.
This might help us track down the mysterious occasional crashes
openQA seems to trigger (RHBZ #1289704)
Test Plan:
Try and trigger a python crash and see if the
file got uploaded. Of course, I did an entire freaking run on
staging and for *ONCE* not one test hit the mysterious crash,
thanks Murphy. I did at least check that this doesn't break
a 'normal' failure, if the file isn't there things don't
explode.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D686
garretraziel took these with F23, I think. Theoretically we
could just have these ones and ditch his, as we're not running
KDE install tests on F23, but we might want to discuss that kind
of question more generally, so for now let's just add the
variant.
We may need more variants for the post-install matches, but the
test doesn't actually get that far ATM because of dependency
issues in the KDE package set, so I'll deal with that once we
can actually do a successful KDE install.
Summary:
This is a bit icky, but it's the easiest way to solve a problem
I've seen a few times, the latest case being
https://openqa.stg.fedoraproject.org/tests/1664 . In that test,
_console_wait_login logs in to tty1 as user, then uefi_
postinstall wants to switch to tty3 and log in as root. When
it does that, sometimes the check_screen loop in console_login
gets hit before the display has actually switched from tty1 to
tty3, so everything gets out of sync.
An alternative would be to have root_console check that it's
either logged in or at the correct tty before handing off to
console_login, but that starts duplicating stuff, and it breaks
in the case the target tty is logged in as a user and the login
prompt is no longer visible...
Test Plan:
Check all tests run as normal, and maybe run UEFI
tests a few times to see that the bug no longer happens (but
it's hard to reliably trigger it anyway).
Reviewers: garretraziel, jskladan
Reviewed By: jskladan
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D683
Summary:
As I figured out a while back, the seabios firmware font is
nearly the same as our console font (eurlatgr) but not quite,
significantly its @ character is different (shorter). We
already have a root_logged_in variant for the firmware font,
but we now need one for user_logged_in as well. The Atomic
installer image has had the Linux console fonts stripped from
its payload, so it's now using the firmware font, and user_
logged_in isn't matching - see
https://openqa.fedoraproject.org/tests/461 .
Test Plan:
Run the cloud_atomic_canned test (on an F23
post-release nightly, as it's not appearing for Rawhide
nightlies ATM) and confirm it now passes.
Reviewers: garretraziel, jskladan
Reviewed By: jskladan
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D684
add KDE package set testcase - this only adds needles and
new testcase configuration, because with needles cleanup from D670,
it should work without change in code.
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D673
Let's use the same principle with DESKTOP tag as we use with
LANGUAGE tag. Where there are any GNOME-only (or KDE-only) needles, tag
them with `DESKTOP-gnome` and delete then when different `DESKTOP` value
is specified. This will help with `QA:Testcase_Package_Sets_KDE_Package_Install`
testcase - we will be able to use almost the same code and check that KDE
got installed properly.
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D670
damnit, that was still wrong. This should do the trick: we can
do 32-bit F23 upgrade tests now (virt-builder added the base
image we need), so re-add that, and put things in the best
order and fix the priorities.
Noticed some problems with the commit while testing it: we
weren't doing 32-bit minimal (to avoid having too many tests,
I think) so let's not do it for upgrade_2 for now, and also
the arch on one test was wrong.
Summary:
This bumps the existing upgrade tests to F23, and drops the
32-bit ones for now, as there is no 32-bit F23 base image for
virt-builder - RHBZ #1288733. It then adds new tests named
'upgrade_2_(etc)' and associates them with the F22 images. The
intent is that we should always have two sets of upgrade tests,
one for each of the currently-supported stable releases; when
we bump to testing F25, the 'upgrade' tests will be bumped to
F24 and the 'upgrade_2' tests to F23, and so on. There will be
a matching diff for openqa_fedora_tools.
Test Plan:
Execute a test run and make sure all the upgrade
tests run; of course you need to make sure you've built the
required disk images.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D679
Summary:
The 'reclaim_space_first_partition' needles aren't very good.
Using the area with the filesystem means we need to duplicate
the needle for NTFS, and the needles in fact also match the
*second* partition in most cases, sometimes causing the tests
to delete the second partition instead of the first and fail.
This design should work better: a single needle should match
all filesystems, and by including some of the highlighted top
row in the match, we should never match on the second row.
Including 'da' in the needle makes this really 'first disk,
first partition', but that's all the cases we currently use
it for. We don't really need this needle to work hard to make
sure we're on the right screen, as the subsequent needles
(which match buttons that only exist on this screen) do that
job fine.
We drop some needles that should no longer be necessary: F23
should now be using the cantarell17 version of the needle,
and F24 the freetype262 needle. We don't run installer tests
for any other release.
We could tweak second_partition needle to match, but nothing
is actually using it anyway.
Test Plan:
Do a full test and run and make sure the tests
which use this needle work, and always select the correct
partition.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D681
freetype 2.6.2 changes font rendering quite significantly.
Most text needles needed redoing. Committing without review
so maybe we finally get some damn useful test results...
Summary: seems like this got lighter for F24 too.
Test Plan:
Run the shrink tests and see if they get past this
screen.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D666
As we saw with F23 testing, qemu32 isn't really supported CPU. Also,
we cannot be sure that `std` is really supported graphics. This changes MACHINE
variables to use `host` CPU with 64bit machines (moreover, this is the case in
BOS now). It also deletes 32bit machine and schedules 32bit tests on 64bit
instead. It also changes graphics to `qxl`. Even though we aren't using SPICE, qxl has
better support (and higher priority) and it seems to work OK with VNC. Fixes T637.
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D655
Summary:
this needle seems to be fragile not because of cantarell in
fact, but because the difference between the the left edge of
the language box and the 'F' is not consistent. So, let's just
not include it in the match.
Test Plan:
Check if French install test works (see test #8847
failure in BOS).
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D661
This adds another Cantarrell 1.8 missing needle as well as
lighter variant of Done button (it's perhaps caused by displayed
warning about missing swap partition on no_swap test?). With this
in place, all tests on Rawhide passes except of KDE (but it seems
that KDE Live images are borked) and desktop upgrade tests.
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D651
Summary:
Instead of sitting there waiting 6000 seconds twice, when DNF
explicitly tells us it failed, just die.
This is why we haven't been getting proper compose check reports
lately; the upgrade tests are failing, waiting 6000 seconds to
time out, then being cloned and tried again, waiting another 6000
seconds. This is just barely going beyond check-compose's 8 hour
wait limit, as it's some time before the upgrade tests even get
started (they're low in the priority list). We're still going to
have that problem if the tests fail any other way, but this at
least catches that case.
Test Plan:
Run the upgrade tests and see that they fail quicker
(assuming the dependency problems they're dying on aren't fixed).
Maybe also do a 22-23 upgrade test and check it still succeeds
properly.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D650
Summary:
When Rawhide's using a debug kernel, the install is pretty slow,
and often times out. This gives us a 33% longer timeout for the
install process when running on Rawhide. This will slow Rawhide
runs down a bit when there are genuine failures at this point,
but it seems kind of unavoidable.
Test Plan: Do a Rawhide run and see if we get fewer false fails.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D643
Cantarell 0.0.18 showed up in Rawhide recently and changes
rendering again, so we need some more variant needles. Once
Cantarell change quiets down a bit we'll have to clean these
all up.
There is a bug (it is fixed in newest unstable version though) in openQA
4.2-1.2 that when you use iSCI HDD device, it fails to boot. Workaround is to
set CDMODEL=scsi-cd (and it won't hurt even when this gets fixed in stable).
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D642
Since we are now logging to user account every time,
I've encountered new bug - we are missing needle for azerty
user logged in. This DR adds it.
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D640
Instead of removing the ` QA:Testcase_Anaconda_user_creation` from all
the testsuites, make OpenQA login in console (as user) each time.
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D636
Summary:
Updating the stable release prior to doing the update can take
a long time if the image hasn't been updated for a while, and
the upgrade download process itself can take a long time. If
the screen blanks out in either case, either the following
needle match may fail (if we're waiting for a needle) or 'still
screen' may be detected early (if we're waiting for a still
screen), so let's disable screen blanking to avoid it.
Test Plan: Run the upgrade tests and see if they work.
Reviewers: garretraziel, jskladan
Reviewed By: jskladan
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D628
Summary: didn't catch this before (as it depends on the image tested)
Test Plan: Test a Server ISO, the ext3 test fails without this
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D622
PART_TABLE_TYPE variable says which type of partition table type
should be on attached HDDs.
Some tests with uefi have to use disks with gpt.
Tests are amended to use right disks.
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D623
Summary:
For Rawhide, the text in os-release-fedora is 'rawhide' not
'Rawhide', so lc the $VERSION value when checking. For other
releases it's digits, so the lc won't change anything - lc('23')
is '23'.
Test Plan: Run the Rawhide upgrade tests, they should succeed.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D620
Summary:
So another couple of Cantarell updates hit Rawhide and changed
rendering a bit more, leading to this needle breaking. This is
for Cantarell 0.0.17.2. No other needles seem to have problems.
Test Plan:
Already in place on BOS - note the 2015-10-15 Rawhide
tests that initially failed but now pass.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D621
Moved all the mess from repo root to a directory. Since there is no need
for all the needles to be in the repo root - no magic happening here, at
the deployment, the needles are copied in the needles directory anyway.
Landing without review, as this seems to be the trend now ;)
Cantarell 0.0.17, which landed in 23 Branched on 2015-10-09,
changes several elements of the font's appearance and leads to
many failed needle matches. This commit contains variants of
all appropriate needles.
We cannot simply replace all the needles as we are doing the
22 stable nightly tests as well. Once all tests we run are on
releases which have 0.0.17, we could make the cantarell17 files
into the 'standard' ones and remove the old ones.
Landing without review as this breaks all tests and the change
is straightforward, simply a case of updating the needles with
the interactive editor.
Summary: simple enough. scheduler should already have the necessary bits.
Test Plan:
Kick off a run and see if we get tests, and the results are
reported to the wiki (Final TC1 should work).
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D607
Summary:
T617 makes some good points about the language tags; this is my
suggestion for an improvement. It requires a bit of cleverness
in unregister_prefix_tags(), but the upshot is that you don't
need to know to set any special tags when creating needles, a
needle with no language-related tags will be considered as valid
for all languages. You have to explicitly add LANGUAGE- tag(s)
to a needle for the language filtering to 'kick in' in any way.
If a needle has at least one LANGUAGE- tag, it will be filtered
unless it has the appropriate tag for the job's specified
language (default is still 'english').
With this approach, only needles which we specifically want to
*only* match their tagged language(s) need the tags, so we can
drop all those -ALL tags.
We're using LANGUAGE- instead of ENV-LANGUAGE- now because the
ENV- tag names denote tags that are treated slightly specially
by openQA, and this is not one. We cannot cleanly use
ENV-INSTLANG because openQA has a hardwired default of 'en_US'
for that.
Test Plan:
Check both English and French tests still work as
intended.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D589
Summary:
We have these 'atomic installer' images (so far just Cloud),
and maxamillion wanted to get them tested. Turns out it's
pretty trivial - they look much like other installs. Only
little wrinkle is they have a reduced hub (no repository
needles) like live images, but are not like live images in
any other way, so I rejigged the 'small hub needle filtering'
handling a bit.
There will be an accompanying diff for tools, and also some
changes in fedfind (these images are getting built nightly
for *current stable*, and it'd be good to test those).
Because we'd like to test the 22 nightlies, I had to add some
needles for 'olddpi' versions of a few screens. See 2e4c1c2 -
the 22 Atomic installer images still have the old GTK+ code
meaning they run at 96.09dpi. I only retook the necessary
needles for the default-install test, if we add any others we
made need to retake a few more needles.
Test Plan:
Schedule jobs for a compose with the atomic installer
image. You will need the matching openqa_fedora_tools diff and
the very latest git fedfind. Check the test for that image runs,
all other tests run as usual, excessive images are not
downloaded, and the atomic installer is not used for running
universal tests.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D595
Summary:
This removes a couple of unused needles. password_required
needles were dupes of console_password_required, and no tests
actually use password_required. tmp_failed_proc just isn't
used by anything at all (I think it was at some point used in
fedup tests).
This also drops the ENV-OFW-1 tag from all needles, which I
think got in because someone based a needle on a SUSE needle
which has that tag, then it spread. It's of no use or meaning
in Fedora.
Test Plan: Check all tests still run as normal.
Reviewers: garretraziel, jskladan
Reviewed By: jskladan
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D579
Summary:
So test runs are getting very long on BOS, and we have UEFI
tests coming. Try to help out by reducing the 32-bit test load
a bit. I tried to strategically drop the tests that are least
likely to differ, e.g. different storage layouts (but not
filesystem/device types), kickstart delivery, and only doing
one upgrade test.
Test Plan:
Check the templates file loads and there are no
obvious errors. See if you agree with the tests I cut.
Reviewers: garretraziel, jskladan
Reviewed By: jskladan
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D580
