We have a big problem with Rawhide KDE update tests getting OOM
killed during this phase. Stopping the desktop before we install
updates should save some RAM and help avoid this.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Boy this seems slow in Rawhide currently. This has the effect
of being more defensive around the services page load.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We've seen some failures of the weather test at the start of
weather_report, where the test expects to be at the hourly view,
and instead it seems to be at a sort of broken state:
https://openqa.fedoraproject.org/tests/1505080#step/weather_report/3
I'm guessing this may be because currently aaa_setup clicks the
city name then is immediately complete, so it will immediately
snapshot. I guess this can result in things being stuck in a kind
of intermediate state on snapshot restore. So, to try and avoid
this, let's assert that we reach the hourly view after clicking
the city name, then wait_still_screen for a few seconds to make
sure things are settled down, before we complete and snapshot.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We seem to be hitting very long loads on the Services and Logs
pages of Cockpit in recent Rawhide testing especially. As I don't
have time to deeply debug this at the moment, let's just give it
longer (but make it a soft failure when it takes longer than
expected).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Sometimes the windows are displayed in the reversed order, which
prevents the checks to find the needles and the test fail
even if it should pass. This change should address this case.
We use variables to track test state across modules, sometimes.
As this is all internal to the test logic I didn't bother always
making these variables upper-case, but os-autoinst now treats
lower-case variables as a fatal error, so we have to change.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The change to read-only sysroot for IoT in F37 causes problems
with this rebase test. It's not supported to rebase from an RO
release (37 or 38) to a non-RO release (36). So we need to make
sure we don't try and do that. This uses some quick hack logic,
but it should be OK and sufficiently specific not to break
anything even if we forget to remove it in future.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It seems we still have trouble with this turned on :( About 60%
of tests fail with the client unable to resolve names.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The cluster of bugs for F37/Rawhide should all be resolved now,
and I'm hoping the old upgrade bug is no longer relevant.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This issue appeared when we started testing Rawhide updates, but
I only noticed it today. When testing Rawhide updates after
Branch point, the upgrade tests upgrade from Branched to Rawhide.
On Branched, updates-testing is enabled by default. We only
disable it when we reach `upgrade_run`, but by that point we've
already done a `dnf -y update` in `upgrade_preinstall` and
potentially installed other packages in steps between
`upgrade_preinstall` and `upgrade_run`. That can cause problems,
like today all FreeIPA upgrade tests on Rawhide are failing
because there's a newer freeipa in updates-testing for F37 than
is in the current Rawhide compose.
Solve this by disabling updates-testing before we do the update
in `upgrade_preinstall`. To avoid excessive code duplication,
factor out the repo disabling code.
We'll do this twice on upgrade tests now, but it shouldn't be a
problem.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Also stop re-doing get_var("DESKTOP") because that's dumb. This
should only, at worst, make things slower if unexpected things
happen - it shouldn't cause failures that wouldn't happen anyway.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This will make them slower, but lately type_safely is just not
reliable, particularly in the new_file test, it's constantly
typoing.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Rawhide live image builds are still taking an awful long time
and often failing. I will look more into why later, but for now,
let's bump the timeouts even more just to try and get through
the job backlog.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
I'd prefer not to have to do this, but having the tests fail on
every compose and Rawhide update test is just too distracting
to live with.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
From anaconda-37.12.1, anaconda defaults to GPT for all BIOS
installs. So we need to create a BIOS boot partition when doing
a BIOS install. I think all other potential configs (x86_64
UEFI, aarch64 (UEFI), ppc64le (OFW)) are covered under the other
two paths, so just making this `else` should be OK.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We need to move the mouse out of the way so we don't need two
needles for "X not highlighted" and "X highlighted", and give
the check_screen a few seconds to update for the cursor move.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
"Star" was removed from the file context menu, so we have to
star the file from the main view now.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We had a ton of needles all covering something very similar
(press a "Credits" button in a GNOME app). There are about four
real variations: old-style regular face white-on-black (eog),
old-style regular face (nautilus and evince before recent
libadwaita ports), old-style bold face (GTE and Clocks before
new libadwaita), and new-style (everything that's been ported
to use libadwaita for its About page). Let's just rationalize
it down to those, using the same needle tag for all of them.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The city is called Reykjavík (note the í). Previously our search
worked because the search function also looked in the name of the
timezone, and the *timezone* name is "Atlantic/Reykjavik" - i.e.
it's really Latin-ized in the name of the timezone. However,
upstream intentionally stopped including the timezone name in
search matches:
https://gitlab.gnome.org/GNOME/gnome-clocks/-/merge_requests/199
so that doesn't work any more. Just searching for "Reykjav"
should solve the problem.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In 43-alpha it's gone, the replacement is Troubleshooting ->
Debugging Information. But it would be a pain to write two
forks in the code for handling both cases, and there's a ton
more stuff in the new-style About dialog that we're not
checking either. I don't think we really need to click on all
of it, and this bit of it isn't super important. So on the
whole I'd rather just keep things simple and drop this check.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
the new_file test failed today because it seems g-t-e now pre-
fills a suggested filename, with extension, and pre-selects the
name part but not the extension part. So when we type 'list.md'
we wound up saving the file as 'list.md.md'. I think hitting
ctrl-a should fix this, and not break when run on older versions
of g-t-e if we ever do that.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
aarch64 looks like it often needs more time to settle after
restoring from snapshot before trying a key combo.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
That last commit to 'fix' the Clocks tests when Silverblue needs
location access to be granted wasn't complete, I left the needle
out. D'oh. Take the chance to give it a better name too.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
If there are too many categories, we don't see the Updates entry
on the left, and this has been breaking Rawhide and F36 tests.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR changes the way to download the test data into the VM.
Although it does not use a disk image as suggested in one
of the review, it does not clone the entire repository, but
a simple tar.gz file that holds the data which will be
distributed into the directory structure.
This way, the amount of data needed to be downloaded dropped
from approximately 50MB to below 2MB.
Also, the existing test suites were adapted to this situation.
Clocks' aaa_setup did not ever actually check the app launched
properly. It also doesn't handle granting permissions if
necessary, which the apps_startstop test for Clocks does do.
This makes the permission check in the apps_startstop test more
efficient, and adds it to the Clocks app aaa_setup test too.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This was just doing something silly before, but with recent
os-autoinst having function signatures, it actually causes the
test to fail because '5' isn't a sane value for the argument
this was setting before. Fix it to set the timeout, as it was
trying to do all along.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It seems when we quit Firefox back to a VT on ppc64le, the system
hangs. Not sure why, but we can deal with it by rebooting the
system and logging back in as root if it happens. Also take the
opportunity to clean up the flow of quit_firefox so we always
check that we get back to a console then wait 5 seconds for the
console to settle, so all the tests that call it can stop doing
that.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
On Rawhide update tests we often don't seem to get to the login
prompt in 10 seconds, so tweak the code a bit to let us specify
a timeout in root_console, and use 30 seconds here.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Let's not have the reference files in one person's fedorapeople
space, in case that person leaves. Let's upload the text.txt
for checking (it's easier to be able to just read what's in it
than try and figure it out from the diff output), and let's use
diff -u because non-unified diff output is awful.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is the automation of the optional testcase https://fedoraproject.org/wiki/QA:Testcase_i18n_default_fonts.
The test implementation runs the same commands as the mentioned test
case and checks the expected output. It is designed to run in the scope
of postinstall tests when the language is set to "japanese".
I'd prefer not to do this, but I don't see a better way to deal
with the stupid 'welcome' screens. I'm not maintaining needles
to click them away forever.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Firefox 97 is now stable on all releases, so we can forget about
handling browser_download_save and just assume download will
happen automatically.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Up to F33 we could check that an error message was shown when we
tried to log in with the wrong password on GNOME, but since F34
it's transient and disappears too quick to reliably catch, so
we don't check it any more. Now F33 is EOL, drop the conditional.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The g-i-s new user mode was removed in F34, so we don't need to
do this any more (as the now-removed comment said).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Before F34 we had to launch the update tool from the systray.
This isn't the case any more, so we can throw all this code and
these needles away.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We seem to be solidly back to always getting a permanent update
notification in current F36/Rawhide, so we don't need this more
complex path any more. We also don't need these needles any more,
they haven't matched for months.
Logging of additional repo setup changed recently in F37, we
need to handle the new message format here.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2 seconds isn't enough to be sure it opened, which is causing
some weird failures in KDE Rawhide update tests.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
aarch64 tests are failing here because anaconda's still thinking
about the delete confirmation, it seems.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
When testing Rawhide updates we set VERSION to the Rawhide
release number, not "Rawhide". This post-upgrade version check
needs adjusting to handle that.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Seeing a failure quite often lately where when we try and hit
ctrl-p to print, we just type a p. There's no wait between
maximizing and trying to print, and only a short wait on
launch, so let's try being a bit more defensive there.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This can actually take a bit of time, it seems, especially with
debug kernels. Let's give it a minute.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Lately anaconda can take up to 10 seconds to exit the root pw
spoke, which can defeat the subsequent `wait_still_screen` that's
meant to wait out the 'slide-in-from-the-top' animation of the
hub. So let's assert the hub after we click Done, then the still
screen wait will only happen *once the hub is visible* and should
really do its job.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
OK, this is annoying. GNOME Software intentionally does *not*
clear the 'download' or 'reboot and update' button when you hit
the refresh button, it just leaves them sitting there while the
refresh happens. So let's specifically require the 'refreshing'
text to appear and go away before we try and click on download
or apply.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Agh, GNOME's UI is *not* helpful here at all. The Apply button
remains visible for a long time after you hit Refresh.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is yet another twiddle to that same damn bit where we try
to apply updates. This more or less reverts the last tweak to
it, where we skipped hitting 'refresh' if 'download' or 'apply'
are already visible. The trouble with that is that the app may
have already found and prepared updates before we got our
"prepared" python3-kickstart update in place - so the update
operation might work perfectly, but not update the package we
expect it to update, and the test may fail.
This time, let's try *always* refreshing, then wait a bit after
hitting the refresh button before we start looking for apply
or download to try and avoid the 'race' we were trying to solve
with the last tweak (where we hit refresh then immediately try
to hit a download or apply button which vanishes before we can
hit it). I think this should be safe as both KDE and GNOME
should always show a refresh button now (this wasn't the case
before, I think, F34).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's a bug in the Save As... dialog on the flatpak version
of evince currently where the existing filename is not pre-
selected, so when the test types 'alternative', it gets
prepended to the existing filename instead of overwriting it,
and we wind up with alternativeevince.pdf, not alternative.pdf.
Let's treat this as a soft failure rather than a hard failure.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
On upgraded systems, gedit might still be present; remove it so
we don't launch it by accident and try to test it instead.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Firefox 97+ don't ask you what to do with downloads any more,
they just...download them. For now we'll handle both workflows,
once 97+ is stable everywhere we can drop handling the old one.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
At the end of _podman_client we create a mutex that we want the
server to pick up. If we exit too soon, the mutex goes away and
the server test fails. 5 seconds turns out to be not enough of a
wait because, although the server retries the lock call every
5 seconds, it can hit `api_call_2 failed` and wait 10 seconds
before retrying. Let's wait 30 seconds just to be safe.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Otherwise, if there's an update to fXX-backgrounds pending, we'll
get it on reboot in the middle of the test, and the real
backgrounds will comes back and replace our black fake ones and
break the test.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Silverblue still has an old version of g-t-e where this theming
stuff worked differently, so put that stuff back for Silverblue
but keep the new stuff for RPMs.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
So just type 'text-editor'. If you have both gedit and gte
installed this will find both, but that should never be the case
so it should be OK.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
To get to the keyboard/input method settings and add an input
method when doing a Japanese install test, we type 'keyboard',
but in current GNOME 42.beta that doesn't find the right pane.
Typing 'input' does work, though, so let's use that instead.
Also the GDM login needle needed updating.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The backend is now cryfs in F36/Rawhide. I don't think we need
to be policing which backend Vault decides to use, so let's just
accept either.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The 'software' test module in GNOME apps_startstop does a subset
of what the desktop_update_graphical test does already, but
using its own needles. Let's just have it use the same needles.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We can't use the default similarity_level for wait_still_screen
when there's a flashing cursor - flashing cursor will always
cause the similarity level to be too low and the wait will just
time out at 30 seconds. Cut it to 42.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This was originally a test of nm-connection-editor. However,
at some point that app stopped shipping a .desktop file by
default (it's in a subpackage that is not included in a default
KDE install) and the needle got updated to match on what the
same string now launched, which is a random part of the KDE
system settings. But there's no real sense in this - we don't
test launching every other pane of the system settings app from
the launcher, so it doesn't make sense to just test one random
one like this. Let's just throw the test out.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We have three different needles which all match on a stock KDE
"cancel" button. Let's just have one. Also, update it for latest
Rawhide/F36 KDE.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
script_output has no arg to make it type slowly, and I'm seeing
that the test often fails trying to do full-speed script_output
at a desktop terminal. Let's do this part from a VT.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The help test had its own needle for the user creation link,
but we already have an existing one. We should probably re-
arrange all the needles that are in 'install_process' now the
root and user creation spokes are moved to the main hub, but
that's a big change so I'll do it separately. This just removes
the duplicate needle and tweaks some match names.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
When the printing_builtin test ran on an F35 respin compose it
failed; it turns out the target filename was different for the
built-in print-to-PDF on GNOME on F35. So let's just always
use the 'ls' output to find the file, but pick the directory
to check based on whether we're using cups or not.
Also rename the needles to have unique names, and add one for
F35 GNOME.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The PR introduces an improved logic to the desktop_printing.pm
that allows to use the USE_CUPS variable in templates to trigger
the installation of cups-pdf prior to the actual test.
The cups-pdf is then used as an alternative PDF printer
instead the built-in Save As PDF method.
It was removed from the default install:
https://pagure.io/fedora-comps/c/5371509
in favor of a new screenshot mechanism that's built in to GNOME
Shell.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This reverts commit 182bfdaa55. The
problem was not in the test code here, it's just that the tests
were run with RAWREL set to 36 when it should be 37; this is
because fedfind's data source hadn't been updated for 36 branch
when the tests ran. It's tricky to time this exactly right -
ideally we'd probably update fedfind's data source one second
before the first Branched compose completes, but of course that's
difficult in practice.
It seems that the IoT fix was not limited to the IoT
subvariant only, which caused wierd behaviour when
the version was set to Rawhide when it should not be.
This fixes it.
The latest version of Gnome-Text-Editor bring a little
bit different UI and some new or modified features.
This commit fixes the suite to run on newest version.
Workstation has replaced gedit with gnome-text-editor in Rawhide,
so this is no longer useful. We will replace it with a test suite
for gnome-text-editor.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Workstation replaced gedit with gnome-text-editor. This updates
the needles and also changes the name used for 'tagging' the
application for the core_applications test.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Both were dropped from the default KDE install set:
https://pagure.io/fedora-comps/c/edd0d74
so we need to drop them here too.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
anaconda changed the repository add code (again) and so the log
messages changed (again). We're now tracking three variations
from <F35, F35, and F36. Sigh.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Lately Firefox sometimes just closes immediately, it doesn't
show the 'close tabs' dialog. So let's make that optional, but
check we quit properly.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In https://openqa.fedoraproject.org/tests/1051360 Firefox showed
an "Open previous tabs?" bar which put this button just off the
bottom of the screen, so we need to scroll to it if that happens.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is a workaround for
https://bugzilla.redhat.com/show_bug.cgi?id=1933378 . Sometimes
when booting Server on a tap test without a working network
config (no DHCP server, static network not yet configured) we
hit a bug where the splash screen does not clear completely, and
this causes all the console needle matches to fail. To work
around this, we remove plymouth from the installed system after
running the install_default_upload test on Server; all affected
tests use the image uploaded by that test. We exclude aarch64
because there's a known problem with removing plymouth on that
arch (#1940163), plus the bug doesn't actually seem to happen on
aarch64 for some reason.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
First attempt at this often fails for some reason - while we're
typing 'keyboard' the results come up as normal, but before we
hit enter, they all disappear and are replaced with "no results
found" (in Japanese). Dunno why. This will hopefully work around
that, if it works reliably on the second try.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
kgpg had its own, which doesn't make any sense. There are grey
and blue background variants that weren't consistently named.
This should rationalize things sensibly, and adds a new needle
for the new Plasma in Rawhide, with a lighter blue background.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We sometimes type 'keyboard' at the overview and get no results.
This might help something finish caching or whatever, let's see.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
After we change the log level in Cockpit, on aarch64, it seems
to take quite a long time to reload the messages. This allows
twice as long, with a soft failure if we get into the back half.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
To work around #1999321, we'll disable dnssec validation on the
FreeIPA server when doing an upgrade to Fedora 35 or later.
This sucks but I can't find a better option.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We dropped memtest from the images. We may replace it with
something better at some point, but until that day, let's drop
this test so it's not uselessly failing all the time.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This fails sometimes just because we're too early, or something.
Also with GNOME Shell 41rc, alt-f1 no longer works to open and
close the overview. super *does* seem to work in KDE these days,
so let's switch from alt-f1 to super everywhere.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Seen a few failures where it takes just longer than 30 seconds
for GDM to show up here, e.g.
https://openqa.fedoraproject.org/tests/968142
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Always do the page-down thing, having it conditional just makes
things more complicated unnecessarily. Try up to 5 times to
click the link, because Cockpit sometimes redraws itself before
us identifying it and clicking on it, e.g.:
https://openqa.fedoraproject.org/tests/968422
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Closing the last notification in the tray closes the entire tray
now, which seems odd. Cope with that by re-opening it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Really this just boils down to needing an extra click. We can
even just do the click in the old UI as well, it's not needed
but won't hurt anything and keeps the code simple.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The 'root spoke takes forever to load if debug enabled' bug was
fixed a while back, and we now always set root password before
the install process starts, so the race problem we had when
doing it at the same time as install was happening is no longer
an issue.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We need the same alternate check method logic for NFS addrepo on
F35 now we're testing F35 updates. This is all getting a bit
messy and could maybe stand a refactor at some point...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
See https://github.com/cockpit-project/cockpit/issues/16243 .
This is a fairly minor issue upstream knows about but will not
be fixed immediately, so we'll add a workaround for it for now.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
As suggested by @kparal, this adds a test that specifies an
additional repository using a metalink. The repository contains
a single package, 'testpackage', that supplements glibc (so it
should always get installed). The test runs an install then
checks that testpackage got installed.
We also deduplicate a pair of needles which were matching on the
same anaconda UI feature (an "add" button) and use that same
needle in this test.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This also requires a new needle for accounts.fedoraproject.org, as the webpage
is completely different now. The old needle for browser_fas_home is obsolete via
this change and can be removed
Remove a whole chunk of needles that haven't matched for more
than 3 months. Also move a few needles to appropriate locations,
simplify some code chunks that relied on removed needles (if
we're not matching the needles, we don't need those chunks any
more), and drop some other no-longer-needed conditionals for
older releases.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
`click_lastmatch` wasn't safe there, if we caught the middlle of
the scroll animation. We have to assert again after waiting.
Also do the same in `_do_install_and_reboot` as the same can
happen.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Grr, with the screen changes and the animations...waiting for
screen to change when clicking a button doesn't work very well
as the button animation often counts as a 'screen change', so
we're still having issues with the stupid animation transition.
Let's see if this helps.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This adds a test for fingerprint-based login, as requested by
@benzea in #223. We use the fprintd dummy device to let us
simulate scanning a fingerprint, and check various scenarios
recommended by @benzea.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The open dialog on Silverblue (which is apparently not at all
the same thing as the open dialog on Workstation, though they
look the same) does not default to the Documents folder, so we
have to open it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
`rpm` doesn't work. I dunno off-hand how you'd install git on
ostree if it wasn't there, so let's just assume it will be.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR fixes issue #188. It adds a test suite to test basic
functionality of Evince and brings the following features:
* test scripts for various Evince functions.
* needles to support the Evince test scripts
* new template variables `TESTPATH` and `POSTINSTALL_LOAD_ALL` (see
below)
* new logic in `main.py` (see below)
The new variables and the new logic make it easier to create test
suites for post-installation tests. If TESTPATH is used, OpenQA
will take all tests mentioned in POSTINSTALL from that specified
TESTPATH. If both TESTPATH and POSTINSTALL_LOAD_ALL are used, then
OpenQA will run all tests it can find at the TESTPATH location.
If POSTINSTALL and POSTINSTALL_LOAD_ALL are set simultaneously,
then only POSTINSTALL will be taken into account and OpenQA will
only load tests mentioned there.
The power_off function in desktop_login was not really asserting/checking
whether the VM got turned off. However, os-autoinst supports checking whether
the VM is turned off via assert_shutdown. This is additionally much more useful
than using check_shutdown, which does nothing if the VM is still running.
Wait for a change when clicking the done button in root password
screen (anaconda can pause for a long time there).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
I've seen some failures caused by a sort of race where both
'apply' and 'refresh' needles match at the first assertion, but
openQA "prefers" the 'refresh' match. So we click the 'refresh'
button and *immediately* check_screen for apply, which is still
visible...but by the time we go to click it, it's gone because
the refresh found something new and now it's showing "Download".
This tweak should help, because if we can 'see' both refresh and
apply at the start, we'll just go ahead and click apply, we
won't refresh. The logic becomes a little more obscure, but I'm
not sure I see a fix for that. At least until KDE's tool finally
settles down for two releases in a row and we might be able to
simplify this whole thing.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It can take some time for first login of a user (especially in
KDE). Test has been failing lately on Rawhide because of this.
It seems until recently we never got a still screen when trying
to log in as Jim - so the effective wait for login to complete
was 60 seconds, 30 seconds for wait_still_screen to time out
then 30 seconds for the actual login needle assertion - but now
we are getting a blank screen for 5 seconds which satisfies
wait_still_screen almost immediately, so effective timeout for
the login process is only 35 seconds, which isn't long enough.
So let's bump the check_desktop timeout to 60 seconds.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
KDE has made it so you need to double-click icons on the desktop
now. Unfortunately this means a clunky conditional at least until
the update goes stable. When F33 is EOL we can reduce it to
just "if kde".
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In #235 we accidentally included an entire disks.pm test that
wasn't meant to be there - the infocenter module test is the
right thing to exercise plasma-disks, there is no standalone
app, running 'disks' just gets you the KDE Partition Manager,
which we already test. So this removes that test and renames a
needle that looks like it's for that test but is actually for
the kinfocenter module, to make this clearer.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It has been noted that updates have broken podman in the past and
this is a major issue for some users. Let's create a new update
flavor and run the test in it. We'll use the server image as a
base, but it's not really a server test, so I'm giving it its own
flavor so it's not run on updates that we only want to run server
tests on, and we can schedule just this test to run on container-y
updates.
As part of this, we need to install podman before running the
test; for flavors we currently run it on we expect podman to be
preinstalled, but that's not true for the server base image.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR adds a new test that automates the above mentioned test case.
It starts the installation in text mode using the `install_text` test
case, which it interrupts using the Anaconda crash trigger.
When the crash happens, it goes through the process of reporting
the bug to Bugzilla, checks that Bugzilla sends a positive
confirmation of the action, but also performs some REST API
calls to do a proper check and then it closes the bug to clean up.
GNOME dropped the g-i-s new user mode in F34, so on a Japanese
install with user created in the installer, you don't get an
input source configured out of the box or on first boot. So
we'll just have to do it manually after booting, before we test
if it works.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Looks like the latest Rawhide got a permanent update notification
for KDE again. F34 is still around, though, so we can't just
revert to the old code, I don't think.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The 'desktop_pacakge_tool_update-kde-detected' needles and
'desktop_update_notification_systray-kde' needles are actually
matching on exactly the same thing, so drop the redundancy. We
need to have the desktop_package_tool_update tag on the older
(F33) version of this needle because on F33 we click on it to
launch the update tool in the desktop_update_graphical test; from
F34 onwards this is *not* what we want to do so the needle should
not have that tag to avoid throwing the test off. When F33 goes
EOL we can drop that tag from the needle and simplify the
destop_update_graphical test. Also add a needle for the Discover
app's 'update' icon when no updates are found.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's some cheating/sloppiness going on here, with the same tag
and sometimes same needle being used to match "LVM2 Volume Group"
and "LVM2 Logical Volume". Today this caused us to pick the thin
pool entry instead in a test, so let's just clean this up and do
it right, with separate needles for matching each thing.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
A recent cups-pdf build changed the default filename for files
output by cups-pdf. We need to have the test look for the
correct filename based on the cups-pdf version.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The needle match seems to have changed when bug #1957858 showed
up, but it's actually just a text rendering change in the window
title, it's not exactly caused by the tiny window. So not marking
as a workaround needle.
Maximizing the window makes the test work faster when we hit that
bug, as type_safely needs to be able to see the results of its
typing.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Seems silly to wait 120 seconds when we know what the criteria
are. GNOME installs, can't do this; others, we have to.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Some fixups for anaconda_help. Two runs of it failed today around
handoff from the root password screen to the install progress
screen; add a couple of wait_still_screens there to make it
safer. Drop the added nonlive needles, because they're too
permissive, causing problems for other tests (they're matching
before they should); instead we solve the problem of spokes being
highlighted by just pressing shift-tab a few times. And fix some
tabs to be spaces.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Had some repeated failures where there's kind of a race between
Software doing some kind of auto-refresh and the test clicking
on stuff. This seems to help.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR automates the mentioned testcase to test that Help can be
displayed in Anaconda during the installation. It navigates through
the available Help screens and if it can see it, it finishes.
This test runs after `install_default_upload` to override the
installation defaults defined for all primary tests.
Delete a duplicated needle.
Reformat list extensions to make it nicer.
Get rid of wrong export and an empty line.
Delete empty line.
Use _boot_to_anaconda for booting and move subroutine accordingly.
Add variable to templates.fif.json
Delete trailing whitespace.
Fix calling the pretest.
Move help checking to another place.
Since 232, there's been a bug where we need to hit tab three
times to get into the first field in the "Join domain" dialog.
In 245, it's down to two times, for some reason. So, handle
that.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Since f33b50e, anaconda doesn't log "enabled repo:" any more. To
ensure the repo actually is enabled we need to check some other
lines. Good news is, we don't need the 'anaconda'|'' dodge any
more, so we can drop that.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Boxes dropped VNC functionality. It's supposed to be replaced by
Connections, but we can't use that until it has fullscreen:
https://gitlab.gnome.org/GNOME/connections/-/issues/5
so use Vinagre for now. We do also prepare some needles for
Connections in anticipation of being able to use it later (since
I already did the work and don't want to waste it...)
Signed-off-by: Adam Williamson <awilliam@redhat.com>
alt-f4 makes sense for an app (Terminal on GNOME) but not really
for closing the system menu (KDE). It seems like it worked till
a day or two back then broke, but I think just using Esc instead
rather than filing a bug is the best plan, I'm not sure I'd
*expect* alt-f4 to work for this.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
anaconda changed how this log line looks (again); update the
check to handle old and new styles for now.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It doesn't seem to return to the top level automatically any more,
though the message goes away after a short time, still.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The Modularity tests rely on an external script to test the modular
behaviour of DNF. There is a potentional risk that the connection
is be down and the script cannot be downloaded.
This enhancement uses a regular OpenQA perl test case script to only
invoke DNF commands and parse their output to test the same behaviour
that we have been testing already.
This enhancement picks a random module for each of the operations,
and thus tries to mimick reality a little bit more.
This adds a test that just fails if any one of a given list of
unwanted packages is installed. This was a request for the
Workstation edition from @catanzaro so I've just implemented it
for Workstation so far, but it's designed to be easily extended
to cover other subvariants too if we want.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is the same thing we did for install_resize_lvm, to address
issue #201. We just didn't get around to doing it for the blivet
test yet. We also change the HDDSIZEGB for the parent test to
15GB so the resizing stuff actually works in both resize tests;
ever since we changed this the install_resize_lvm test has not
been working properly, it hasn't actually been doing any resize.
Also drop the swap partition stuff from that test as it's for
sure no longer needed.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
On current F34 we get no permanent update notification in the
notifications view, we only get a *transient* one plus the
systray icon. This tweaks things so on F34 we check both of
those things correctly, behaviour on <F34 should be unchanged.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Man, this thing can get into a lot of states. Apparently somehow
it can go straight from refresh to reboot?
Signed-off-by: Adam Williamson <awilliam@redhat.com>
KDE update was still often failing on #1943943, so this tries a
bit harder to work around it. We add a 'refresh' needle for KDE,
and tweak the 'retry' logic to click it if we get to that point.
Note adding the needle also changes behaviour slightly - we may
click this needle if we see it on first entering the screen. So
either change may be helping. Either way, this does make the test
more reliable.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Sometimes we click the button, it cycles briefly, and...just
comes back. To avoid unpredictable failures on update tests that
have nothing to do with the update, let's try and handle this by
just clicking it till it works.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In GDM 40 the message is displayed only briefly, like in SDDM,
so we can't assert it. Only do it for <F34.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
OK, extending the timeout didn't work. Try this instead. The
problem is when GNOME takes a long time to log out we wrongly
decide we're in the "DM is showing a 'screensaver' state" case
and hit 'ret' to clear it. In GDM that selects the highlighted
user. Maybe if we use 'esc', it'll still work in SDDM to clear
the screensaver state, but not select the first user in the list
in GDM...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is a bandaid for GNOME taking a long time to log out right
now. I would prefer to make login_user more robust, but that's a
bit more complicated as it's used for both unlock and login.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Main UI appears over the tip of the day now, so we can ignore it
and just check the UI ran then close it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
For consistency, let's just return to the desktop right away. We
also need to handle closing the overview before running installer
on live image boot.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
