Add two radiobuttons for user to select automatic/manual memory reserve
For fedora they will not be added.
When switching from manual configure to auto reserve, the memory size and
summary widgets will be dimmed.
Testing below cases on virtual machine, all cases need reboot and verify:
Fedora:
1. Enable/Disable kdump
2. change reserve size
3. change kdump.conf content
4. Auto -> Manual
5. Manual -> Auto
RHEL:
modify the /etc/redhat-release and install the rhel7 kernel rpm in fedora vm.
1. auto reservation
2. manual specify reserve mem size
3. enable/disable kdump
4. change kdump.conf content
Vivek: label with text "Memory To Be Reserved"
Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
The '_' before UI string is for Alt+TheFirstCharacter shortkey
ie. Press Alt+T will focus on the self.totalMem widget.
But the totalMem and systemUsableMem are not configurable, so
this is in fact unnecessary. OTOH, The 'Alt+T' will be used in later
patches, so remove these two here.
Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Pygtk documentation says the page size field is not used, but actually
there will be a gtk warning below:
/usr/share/firstboot/modules/firstboot_kdump.py:216: GtkWarning: GtkSpinButton: setting an adjustment with non-zero page size is deprecated
self.kdumpMemspin = gtk.SpinButton(self.memAdjustment, 0, 0)
Fix it by setting the last field to 0.
Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Per vivek, update all kernels configs in grub config file make more sense.
use --update-kernel=ALL to update all grub entries.
Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Memory reservation could fail, so add a new widget to show the
actual reserved size. If crashkernel is set but reserved size is
0, we still regard kdump is enabled, the actual reserved widget
just show the reservation status.
vivek: label with text "Memory Currently Reserved"
Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Per discussion in kdump meetint, add crashkernel=auto to rhcrashkernel-param
script for rhel7 for testing. Anaconda will call this script to add the cmdline
instead of hardcode it.
Signed-off-by: Dave Young <dyoung@redhat.com>
Fedora firstboot will alert about requiring a kernel-kdump
for x86, this is not true. In fact all arches what we support
do not depend on kernel-kdump any more.
Thus remove the kernel-kdump handling in firstboot.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Resolves: bz805782
elilo is deprecated in fedora, so remove the elilo support in firstboot module.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Resolves: bz805782
Update to use grub2, also update the config file names
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Resolves: bz805782
Copying something from old bug 688150:
Steps to Reproduce:
1.Go through FirstBoot process while get to Kdump
2.Change Kdump memory
3.Press Finish
4.A window pops-up (Changing Kdump setting requires ...)
5.Do not press "No" or "Yes" but pres the "X" in the right up corner.
Actual results:
The effect of this action is the same as pressing "YES"
Expected results:
The effect of this action is the same as pressing "NO
So this patch fix to only reboot when rc == gtk.RESPONSE_YES.
Port from below patch from rhel:
commit ed0c89d8e42b9205671cb6c81f9f73c275bee72f
Author: amwang <amwang@redhat.com>
Date: Thu Mar 17 10:07:52 2011 +0000
Resolves: bug 688150.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Resolves: bz805782
The text of gtk checkbutton for enable kdump was not localized.
Add gettext _() around it to make it translatable.
[update]:
-add changelog
Port below patch from rhel:
commit ce18ccc9557137b276471fbe200d7a18ce90fcf5
Author: amwang <amwang@redhat.com>
Date: Mon Aug 9 08:20:34 2010 +0000
Resolves: bug 619744.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Resolves: bz805782
Make kdump configurable in firstboot
Add an advanced kdump config text widget, so user can configure
kdump.conf in firstboot,
[update]:
-add changelog
-remove unused variable
Port below patch from rhel:
commit e5ac50339e73b11cd9d5ba91712c43cce7ffcbcb
Author: amwang <amwang@redhat.com>
Date: Thu Mar 17 09:18:13 2011 +0000
Resolves: bug 598064.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Resolves: bz805782
in case kdump is disabled, we also need to disable the kdump service
This patch is ported from below rhel patch, changed below two issues though:
1. fixed the systemctl line
2. dropped an useless line for using 0 for gtk adjustment page_size field.
see http://www.pygtk.org/pygtk2tutorial/sec-SpinButtons.html for the field doc.
Rhel6 commit is below:
commit c5735dee743fa41d14635fe2fbf5f48264bc36f6
Author: nhorman <nhorman@redhat.com>
Date: Thu Jul 29 15:52:00 2010 +0000
Resolves: bz 594830
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Resolves: bz805782
the text domain should be kexec-tools instead of firstboot,
or it kexec-tools translation will not find the right .mo
Backport from rhel6 bz619061
commit 18de84f91906ec41b2640f67d21eef39ecb0833b
Author: amwang <amwang@redhat.com>
Date: Fri Jul 30 02:45:52 2010 +0000
Resolves: bug 619061.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Add force_rebuild option in kdump.conf
Some user need always force rebuild the dumprd, add an kdump.conf
option force_rebuild here. If force_rebuild is set to 1
kdump initrd will be rebuilt every time then the service starts.
Testing:
Tested below cases:
force_rebuild
force_rebuild 0
force_rebuild 1
force_rebuild 2
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Resolves bz845916.
For raw dump code below:
$CORE_COLLECTOR /proc/vmcore | dd of=$1 bs=$DD_BLKSIZE >> /tmp/dd_progress_file 2>&1 || return 1
in case pipe fails it will still return 0, Fix this by return the PIPESTATUS[0] at the end of this fuction.
Signed-off-by: Chao Wang <chaowang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Kdump dracut hooks need to enter emergency shell, currently it directly call
"sh -i -l", with recent dracut this does not work anymore without proper ctty.
change to call dracut lib function _emergency_shell instead of directly call
'sh -i -l'
This patch depends on dracut patch:
http://permalink.gmane.org/gmane.linux.kernel.initramfs/2821
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Currently net options means either nfs or ssh dump.
Better to split these two into standalone options. That's more clear to user.
after the split, ssh dump need user specify "ssh user@host"
nfs dump need user specify "nfs host:nfsshare"
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
dump_nfs mount the nfs share to /mnt, it's not what we expected.
Change to use dracut fstab mount infrastructure for this.
After the fix nfs dump is just same as localfs dump.
The --mount for nfs does not work before, it depend on the upstream patch:
1. dracut fix to autoload nfs.ko in case nfs4. the patch post as below:
http://permalink.gmane.org/gmane.linux.kernel.initramfs/2768
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
nfs will be handled in fstab-sys as well as localfs.
so rename dump_localfs to dump_fs firstly.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
in dump_localfs, we should error out if fstab mount fails
Also error out if mkdir fails.
vivek: display error message for debugging purpose.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
We should use systemctl instead of service to start/restart the kdump service
update kexec-kdump-howto.txt as well.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
we now switched to systemd, 'service kdump propagate' does not work anymore.
update the alert message to use 'kdumpctl propagate'
vivek: update kexec-kdump-howto.txt as well.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
For "-c /dev/null" Harald mentioned that it is useless.
In fact, dracut code [[ -f /dev/null ]] will return false thus it will still use
the default config file
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Cong Wang <amwang@redhat.com>
kernel-modules and kdumpbase will be included automaticlly when check() pass.
So no need explictly specify them in dracut cmdline.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
file install code should stay in module-setup.sh, move core_collector installation
code as well.
Note: mkdumpfile is installed twice before, one is dracut cmdline, another is
module_setup.sh. This patch removed the duplicate code in dracut cmdline.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
moving file install code to module-setup.sh looks better.
This patch move extra_bins installation to module-setup.sh
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
We do not depend on busybox anymore, so remove it from Requires field.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
For core_collector like makedumpfile use case, it will compress and filter the
vmcore so free space small than memtotal is mostly ok. But we can not guarantee
it will be always ok.
The "there is not enough space" is not accurate, improve it to "there might be
not enough space"
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Resolves: bz821997
dracut will mount rootfs for us, so we need not pass root to fstab again here.
Here remove the root-mount line.
This will depends on the root=cmdline is right, by default kdump will
inherit it from /proc/cmdline.
Vivek: add document about the assumption for the root= cmdline issue.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
fstab-sys module will be added automaticlly when there's --mount passed
So no need to explictly add it in dracut cmdline
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
dash is be default omited in f17, but we use -o in command line so our omit
modules list will overwrite the system configs, so dash will be installed to
initramfs.
Here avoid install dash by adding it to the '-o' list
Also remove dash dependency from rpm spec
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
In case explict DNS setup in ifcfg file, we should add proper cmdline
for dracut network use.
Add a kdump_setup_dns function to handle this.
v1->v2: vivek: use echo instead of 'echo -n'
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
exit the saved $? instead of the wrong one after echo line
v1->v2: vivek, save the return value instead of exit 1
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
s390x netdev need special cmdline to bring up
parse the ifcfg file to append proper cmdline, also add znet dracut module
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
module_setup.sh removed comment and blank lines of kdump.conf, then install it
to initramfs, but it leaved the /tmp/$$-kdump.conf which should be removed.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Resolves: bz806196
Adding check_size function for filesystem dump, also move common code to
top of the file because get_fs_size need know the mount point.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
The original blacklist patch was applied without conflict.
But in fact there's exactly same context with amerigo's original patch and
it's in wrong place!
Moving it to the right switch branch..
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Update: use /sys/class/net/bondX/bonding/mode
We should set the mode of the bonding properly
in the second kernel too.
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Update: error out vlan over bridge case
This patch adds support for vlan tagged bonding,
in theory, we could support other complex setup as well,
in practice, this is not easy, so just support vlan
tagged bonding, which is the one we support in RHEL6.
Note, this patch depends on the dracut patch:
http://marc.info/?l=initramfs&m=134025049228510&w=2
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>