Since the logger was introduced into kdump, let's enable it for kdump
so that we can output kdump messages according the log level and save
these messages for debugging.
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Kdump service will create kdump initramfs when needed, but it won't
clean up the kdump initramfs on kernel uninstall. So create a kernel
install hook to do the clean up job.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
If the directory /etc/kdump/pre.d is optional, then it is hard
to tell between the following cases:
-1. no directory "/etc/kdump/pre.d"
-2. "rm -rf /etc/kdump/pre.d", which removes all scripts under pre.d
For the second case, kdump.img should be rebuilt.
To bail out from this corner case, always creating pre.d and post.d
during rpm installation.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Switch root is never used for kdump image, and this will be helpful to
reduce the initramfs size.
Also increase dracut dependency version and the function is
dracut_no_switch_root is new introduced.
This commit is applied to RHEL some time ago, but missing in Fedora as
Fedora's Dracut didn't backport this feature at that time. Now apply
this missing commit.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
This reverts commit cee618593c.
Upstream dracut have provided a parameter for adding mandantory network
requirement by appending "rd.neednet" parameter, so we should use that
instead.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Backport from the upstream makedumpfile devel branch.
commit 989152e113bfcb4fbfbad6f3aed6f43be4455919
Author: Kazuhito Hagio <k-hagio-ab@nec.com>
Date: Tue Feb 25 16:04:55 2020 -0500
[PATCH] Introduce --check-params option
Currently it's difficult to check whether a makedumpfile command-line
is valid or not without an actual panic. This is inefficient and if
a wrong configuration is not tested, you will miss the vmcore when an
actual panic occurs.
In order for kdump facilities like kexec-tools to be able to check
the specified command-line parameters in advance, introduce the
--check-params option that only checks them and exits immediately.
Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
Acked-by: Kairui Song <kasong@redhat.com>
The dracut initqueue may quit immediately and won't trigger any hook if
there is no "finished" hook still pending (finished hook will be deleted
once it return 0).
This issue start to appear with latest dracut, latest dracut use
network-manager to configure the network,
network-manager module only install "settled" hook, and we didn't
install any other hook. So NFS/SSH dump will fail. iSCSI dump works
because dracut iscsi module will install a "finished" hook to detect if
the iscsi target is up.
So for NFS/SSH we keep initqueue running until the host successfully get
a valid IP address, which means the network is ready.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Backport from the makedumpfile devel branch in upstream.
commit 8425342a52b23d462f10bceeeb1c8a3a43d56bf0
Author: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Date: Fri Sep 6 09:50:34 2019 -0400
[PATCH] Fix inconsistent return value from find_vmemmap()
When -e option is given, the find_vmemmap() returns FAILED(1) if
it failed on x86_64, but on architectures other than that, it is
stub_false() and returns FALSE(0).
if (info->flag_excludevm) {
if (find_vmemmap() == FAILED) {
ERRMSG("Can't find vmemmap pages\n");
#define find_vmemmap() stub_false()
As a result, on the architectures other than x86_64, the -e option
does some unnecessary processing with no effect, and marks the dump
DUMP_DH_EXCLUDED_VMEMMAP unexpectedly.
Also, the functions for the -e option return COMPLETED or FAILED,
which are for command return value, not for function return value.
So let's fix the issue by following the common style that returns
TRUE or FALSE, and avoid confusion.
Signed-off-by: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Signed-off-by: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Acked-by: Kairui Song <kasong@redhat.com>
Backport from the makedumpfile devel branch in upstream.
commit b461971bfac0f193a0c274c3b657d158e07d4995
Author: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Date: Thu Aug 29 14:51:56 2019 -0400
[PATCH] Fix exclusion range in find_vmemmap_pages()
In the function, since pfn ranges are literally start and end, not start
and end+1, if the struct page of endpfn is at the last in a vmemmap page,
the vmemmap page is dropped by the following code, and not excluded.
npfns_offset = endpfn - vmapp->rep_pfn_start;
vmemmap_offset = npfns_offset * size_table.page;
// round down to page boundary
vmemmap_offset -= (vmemmap_offset % pagesize);
We can use (endpfn+1) here to fix.
Signed-off-by: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Signed-off-by: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Acked-by: Kairui Song <kasong@redhat.com>
Backport from the makedumpfile devel branch in upstream.
commit aa5ab4cf6c7335392094577380d2eaee8a0a8d52
Author: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Date: Thu Aug 29 12:26:34 2019 -0400
[PATCH] x86_64: Fix incorrect exclusion by -e option with KASLR
The -e option uses info->vmemmap_start for creating a table to determine
the positions of page structures that should be excluded, but it is a
hardcoded value even with KASLR-enabled vmcore. As a result, the option
excludes incorrect pages from it.
To fix this, get the vmemmap start address from info->mem_map_data.
Signed-off-by: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Signed-off-by: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Acked-by: Kairui Song <kasong@redhat.com>
Backport from the makedumpfile devel branch in upstream.
commit 7bdb468c2c99dd780c9a5321f93c79cbfdce2527
Author: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Date: Tue Jul 23 12:24:47 2019 -0400
[PATCH] Increase SECTION_MAP_LAST_BIT to 4
kernel commit 326e1b8f83a4 ("mm/sparsemem: introduce a SECTION_IS_EARLY
flag") added the flag to mem_section->section_mem_map value, and it caused
makedumpfile an error like the following:
readmem: Can't convert a virtual address(fffffc97d1000000) to physical address.
readmem: type_addr: 0, addr:fffffc97d1000000, size:32768
__exclude_unnecessary_pages: Can't read the buffer of struct page.
create_2nd_bitmap: Can't exclude unnecessary pages.
To fix this, SECTION_MAP_LAST_BIT needs to be updated. The bit has not
been used until the addition, so we can just increase the value.
Signed-off-by: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Signed-off-by: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Acked-by: Dave Young <dyoung@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Backport from the makedumpfile devel branch in upstream.
commit c1b834f80311706db2b5070cbccdcba3aacc90e5
Author: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Date: Tue Jul 23 11:50:52 2019 -0400
[PATCH] Do not proceed when get_num_dumpable_cyclic() fails
Currently, when get_num_dumpable_cyclic() fails and returns FALSE in
create_dump_bitmap(), info->num_dumpable is set to 0 and makedumpfile
proceeds to write a broken dumpfile slowly with incorrect progress
indicator due to the value.
It should not proceed when get_num_dumpable_cyclic() fails.
Signed-off-by: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Signed-off-by: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Acked-by: Dave Young <dyoung@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
When building for i386, an error occured:
kexec/arch/i386/kexec-x86.c:39:22: error: 'multiboot2_x86_probe'
undeclared here (not in a function); did you mean 'multiboot_x86_probe'?
39 | { "multiboot2-x86", multiboot2_x86_probe, multiboot2_x86_load,
| ^~~~~~~~~~~~~~~~~~~~
| multiboot_x86_probe
kexec/arch/i386/kexec-x86.c:39:44: error: 'multiboot2_x86_load'
undeclared here (not in a function); did you mean 'multiboot_x86_load'?
39 | { "multiboot2-x86", multiboot2_x86_probe, multiboot2_x86_load,
| ^~~~~~~~~~~~~~~~~~~
| multiboot_x86_load
kexec/arch/i386/kexec-x86.c:40:4: error: 'multiboot2_x86_usage'
undeclared here (not in a function); did you mean 'multiboot_x86_usage'?
40 | multiboot2_x86_usage },
| ^~~~~~~~~~~~~~~~~~~~
| multiboot_x86_usage
Fix this issue by putting the definition in the right header, also tidy
up Makefile.
Signed-off-by: Kairui Song <kasong@redhat.com>
Backport from the makedumpfile devel branch in upstream.
commit d222b01e516bba73ef9fefee4146734a5f260fa1 (HEAD -> devel)
Author: Lianbo Jiang <lijiang@redhat.com>
Date: Wed Jan 30 10:48:53 2019 +0800
[PATCH] x86_64: Add support for AMD Secure Memory Encryption
On AMD machine with Secure Memory Encryption (SME) feature, if SME is
enabled, page tables contain a specific attribute bit (C-bit) in their
entries to indicate whether a page is encrypted or unencrypted.
So get NUMBER(sme_mask) from vmcoreinfo, which stores the value of
the C-bit position, and drop it to obtain the true physical address.
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
'maxcpus' setting normally don't work on several kdump enabled systems
due to a known udev issue.
Currently the fedora kdump configuration is set as the following on the
aarch64 systems:
# cat /etc/sysconfig/kdump
<..snip..>
# This variable lets us append arguments to the current kdump
# commandline after processed by KDUMP_COMMANDLINE_REMOVE
# KDUMP_COMMANDLINE_APPEND="irqpoll maxcpus=1 reset_devices"
<..snip..>
Since the 'maxcpus' setting doesn't limit the number of SMP CPUs,
so the kdump kernel still boots with all CPUs available on the system.
For e.g on the qualcomm amberwing its 46 CPUs:
# lscpu
Architecture: aarch64
Byte Order: Little Endian
CPU(s): 46
On-line CPU(s) list: 0-45
Thread(s) per core: 1
Core(s) per socket: 46
Socket(s): 1
NUMA node(s): 1
Vendor ID: Qualcomm
Model: 1
Model name: Falkor
Stepping: 0x0
CPU max MHz: 2600.0000
CPU min MHz: 600.0000
BogoMIPS: 40.00
L1d cache: 32K
L1i cache: 64K
L2 cache: 512K
L3 cache: 58880K
NUMA node0 CPU(s): 0-45
Flags: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid asimdrdm
This causes the memory consumption in the kdump kernel to swell up and
we can end up having OOM issues in the kdump kernel boot.
Whereas if we use 'nr_cpus=1' in the bootargs, the number of SMP CPUs in
the kdump kernel get limited to 1.
The 'swiotlb=noforce' setting in bootargs provide us extra guarding, to
ensure the crash kernel size requirements do not swell on systems
which support swiotlb.
With the above settings, crashkernel boots properly (without OOM) on all
the aarch64 boards I could test on - qualcomm amberwings, hp-moonshots
and hpe-apache (thunderx2) for crash dump saving on local disk.
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
On powerpc, after hot add cpu and trigger crash on the hot-added cpu, the
kdump kernel hangs after "I'm in purgatory".
The current udev rules expects the dtb to be rebuit on cpu add/remove event.
But since powerpc does not follow the standard cpu hot add framework, it
only ejects online/offline event to user space when cpu is hot
added/removed, instead of add/remove event. Pingfan tried fixing that but
it didn't please the maintainer as it breaks some old userspace tools.
Due to the failure of dtb's rebuilding, KDump kernel fails to get the
'boot_cpuid' and eventually fails to boot [see early_init_dt_scan_cpus() in
arch/powerpc/kernel/prom.c file] if system crashes on hot-added CPU.
Work around it by changing udev rules on powerpc to onlne/offline.
As for offline message, it is even useless on powerpc, and can be dropped.
See the explain: On powerpc, /sys/devices/system/cpu/cpuX nodes are present
for all "possible", irrespective of whether a CPU is hot-added/removed.
crash_notes are already built for all /sys/devices/system/cpu/cpuX nodes and
these nodes are present for all "possible" CPUs
(online/offline/could-be-hot-removed/could-be-hot-added)
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
eppic project have moved to github, update to latest upstream snapshot,
change source link and tar file naming style to fit github's URL format.
This fix the O0 warning reported by annocheck and passes all distro package
flag checking.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
