Commit Graph

196 Commits

Author SHA1 Message Date
Coiby Xu
41b8f9528c fix incorrect usage of _get_all_kernels_from_grubby
It's found that the kernel cmdline crashkernel=auto doesn't get updated
when upgrading kexec-tools. This happens because _get_all_kernels_from_grubby
is called with no argument by reset_crashkernel_after_update. When retrieving
all kernel paths on the system, "grubby --info ALL" should be used. Fix this
error by passing "ALL" argument.

Fixes: 0adb0f4 ("try to reset kernel crashkernel when kexec-tools updates the default crashkernel value")

Reported-by: Jie Li <jieli@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Tao Liu <ltao@redhat.com>
2022-02-14 10:34:55 +08:00
Coiby Xu
5111c01334 fix the mistake of swapping function parameters of read_proc_environ_var
_is_osbuild fails because it expects the 1st and 2nd function parameter
to be the environment variable and environ file path respectively. Fix
it by swapping the parameters in read_proc_environ_var.

Note the osbuild environ file path is defined in _OSBUILD_ENVIRON_PATH
so _is_osbuild can be unit-tested by overwriting _OSBUILD_ENVIRON_PATH.

Fixes: 6a3ce83 ("fix the error of parsing the container environ variable for osbuild")
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Pingfan Liu <piliu@redhat.com>
2022-02-08 10:42:40 +08:00
Coiby Xu
6a3ce83a60 fix the error of parsing the container environ variable for osbuild
The environment variable entries in /proc/[pid]/environ are separated by
null bytes instead of by spaces. Update the sed regex to fix this issue.

Note that,
  1. this patch also fixes a issue which is kdumpctl would try to reset
     crashkernel even osbuild has provided custom crashkernel value.
  2. kernel hook 92-crashkernel.install installed by kexec-tools is
     guaranteed to be ran by kernel-install. kexec-tools doesn't recommend
     kernel so there is no guarantee kernel is installed after kexec-tools.
     But dnf invokes kernel-install in the posttrans scriptlet (of kernel-core)
     which is always ran after all packages including kexec-tools and kernel
     in a dnf transaction.
  3. To be able to do unit tests, the logic of reading environment variable
     has been extracted as a separate function.

Fixes: ddd428a ("set up kernel crashkernel for osbuild in kernel hook")
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
2022-01-26 08:32:06 +08:00
Coiby Xu
ae0cbdf34a fix "kdump: Invalid kdump config option auto_reset_crashkernel" error
kdumpctl only accepts a specified set of options. Add
auto_reset_crashkernel to this set.

Fixes: 73ced7f ("introduce the auto_reset_crashkernel option to kdump.conf")
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Tao Liu <ltao@redhat.com>
2022-01-07 12:20:37 +08:00
Coiby Xu
d5c31605f3 use grep -s to suppress error messages about nonexistent or unreadable files
When a file doesn't exist or isn't readable, grep complains as follows,

grep: /proc/cmdline: No such file or directory
grep: /etc/kernel/cmdline: No such file or directory

/proc/cmdline doesn't exist when installing package for an OS image and
/etc/kernel/cmdline may not exist if osbuild doesn't want set custom
kernel cmdline.

Use "-s" to suppress the error messages.

Fixes: 0adb0f4 ("try to reset kernel crashkernel when kexec-tools updates the default crashkernel value")
Fixes: ddd428a ("set up kernel crashkernel for osbuild in kernel hook")
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Tao Liu <ltao@redhat.com>
2022-01-07 12:20:21 +08:00
Coiby Xu
ddd428a1d0 set up kernel crashkernel for osbuild in kernel hook
osbuild is a tool to build OS images. It uses bwrap to install packages
inside a sandbox/container. Since the kernel package recommends
kexec-tools which in turn recommends grubby, the installation order would
be grubby -> kexec-tools -> kernel. So we can use the kernel hook
92-crashkernel.install provided by kexec-tools to set up kernel
crashkernel for the target OS image. But in osbuild's case, there is no
current running kernel and running `uname -r` in the container/sandbox
actually returns the host kernel release. To set up kernel crashkernel for
the OS image built by osbuild, a different logic is needed.

We will check if kernel hook is running inside the osbuild container
then set up kernel crashkernel only if osbuild hasn't specified a
custome value. osbuild exposes [1] the container=bwrap-osbuild environment
variable. According to [2], the environment variable is not inherited down
the process tree, so we need to check /proc/1/environ to detect this
environment variable to tell if the kernel hook is running inside a
bwrap-osbuild container. After that we need to know if osbuild wants to use
custom crashkernel value. This is done by checking if /etc/kernel/cmdline
has crashkernel set [3]. /etc/kernel/cmdline is written before packages
are installed.

[1] https://github.com/osbuild/osbuild/pull/926
[2] https://systemd.io/CONTAINER_INTERFACE/
[3] https://bugzilla.redhat.com/show_bug.cgi?id=2024976#c5

Reviewed-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
2022-01-05 09:40:24 +08:00
Coiby Xu
5e8c751c39 reset kernel crashkernel for the special case where the kernel is updated right after kexec-tools
When kexec-tools updates the default crashkernel value, it will try to
reset the existing installed kernels including the currently running
kernel. So the running kernel could have different kernel cmdline
parameters from /proc/cmdline. When installing a kernel after updating
kexec-tools, /usr/lib/kernel/install.d/20-grub.install would be called
by kernel-install [1] which would use /proc/cmdline to set up new kernel's
cmdline. To address this special case, reset the new kernel's crashkernel
and fadump value to the value that would be used by running kernel after
rebooting by the installation hook. One side effect of this commit is it
would reset the installed kernel's crashkernel even currently running kernel
don't use the default crashkernel value after rebooting. But I think this
side effect is a benefit for the user.

The implementation depends on kernel-install which run the scripts in
/usr/lib/kernel/install.d passing the following arguments,

  add KERNEL-VERSION $BOOT/MACHINE-ID/KERNEL-VERSION/ KERNEL-IMAGE [INITRD-FILE ...]

An concrete example is given as follows,
  add 5.11.12-300.fc34.x86_64 /boot/e986846f63134c7295458cf36300ba5b/5.11.12-300.fc34.x86_64 /lib/modules/5.11.12-300.fc34.x86_64/vmlinuz

kernel-install could be started by the kernel package's RPM scriplet [2].
As mentioned in previous commit "try to reset kernel crashkernel when
kexec-tools updates the default crashkernel value", kdumpctl has difficulty
running in RPM scriptlet fore CoreOS. But rpm-ostree ignores all kernel hooks,
there is no need to disable the kernel hook for CoreOS/Atomic/Silverblue. But a
collaboration between rpm-ostree and kexec-tools is needed [3] to take care
of this special case.

Note the crashkernel.default support is dropped.

[1] https://www.freedesktop.org/software/systemd/man/kernel-install.html
[2] https://src.fedoraproject.org/rpms/kernel/blob/rawhide/f/kernel.spec#_2680
[3] https://github.com/coreos/rpm-ostree/issues/2894

Reviewed-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
2022-01-05 09:40:24 +08:00
Coiby Xu
0adb0f4a8c try to reset kernel crashkernel when kexec-tools updates the default crashkernel value
kexec-tools could update the default crashkernel value.
When auto_reset_crashkernel=yes, reset kernel to new crashkernel
value in the following two cases,
 - crashkernel=auto is found in the kernel cmdline
 - the kernel crashkernel was previously set by kexec-tools i.e.
   the kernel is using old default crashkernel value

To tell if the user is using a custom value for the kernel crashkernel
or not, we assume the user would never use the default crashkernel value
as custom value. When kexec-tools gets updated,
 1. save the default crashkernel value of the older package to
    /tmp/crashkernel (for POWER system, /tmp/crashkernel_fadump is saved
    as well).
 2. If auto_reset_crashkernel=yes, iterate all installed kernels.
    For each kernel, compare its crashkernel value with the old
    default crashkernel and reset it if yes

The implementation makes use of two RPM scriptlets [2],
 - %pre is run before a package is installed so we can use it to save
   old default crashkernel value
 - %post is run after a package installed so we can use it to try to reset
   kernel crashkernel

There are several problems when running kdumpctl in the RPM scripts
for CoreOS/Atomic/Silverblue, for example, the lock can't be acquired by
kdumpctl, "rpm-ostree kargs" can't be run and etc.. So don't enable this
feature for CoreOS/Atomic/Silverblue.

Note latest shellcheck (0.8.0) gives false positives about the
associative array as of this commit. And Fedora's shellcheck is 0.7.2
and can't even correctly parse the shell code because of the associative
array.

[1] https://github.com/koalaman/shellcheck/issues/2399
[2] https://docs.fedoraproject.org/en-US/packaging-guidelines/Scriptlets/

Reviewed-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
2022-01-05 09:40:24 +08:00
Coiby Xu
140da74a34 rewrite reset_crashkernel to support fadump and to used by RPM scriptlet
Rewrite kdumpctl reset-crashkernel KERNEL_PATH as
kdumpctl reset-crashkernel [--fadump=[on|off|nocma]]  [--kernel=path_to_kernel] [--reboot]

This interface would reset a specific kernel to the default crashkernel value
given the kernel path. And it also supports grubby's syntax so there are the
following special cases,
 - if --kernel not specified,
    - use KDUMP_KERNELVER if it's defined in /etc/sysconfig/kdump
    - otherwise use current running kernel, i.e. `uname -r`
 - if --kernel=DEFAULT, the default boot kernel is chosen
 - if --kernel=ALL, all kernels would have its crashkernel reset to the
   default value and the /etc/default/grub is updated as well

--fadump=[on|off|nocma] toggles fadump on/off for the kernel provided
in KERNEL_PATH. If --fadump is omitted, the dump mode is determined by
parsing the kernel command line for the kernel(s) to update.

CoreOS/Atomic/Silverblue needs to be treated as a special case because,
 - "rpm-ostree kargs" is used to manage kernel command line parameters
    so --kernel doesn't make sense and there is no need to find current
    running kernel
 - "rpm-ostree kargs" itself would prompt the user to reboot the system
   after modify the kernel command line parameter
 - POWER is not supported so we can assume the dump mode is always kdump

This interface will also be called by kexec-tools RPM scriptlets [1]
to reset crashkernel.

Note the support of crashkenrel.default is dropped.

[1] https://docs.fedoraproject.org/en-US/packaging-guidelines/Scriptlets/

Reviewed-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
2022-01-05 09:40:24 +08:00
Coiby Xu
12ecbce359 fix incorrect usage of rpm-ostree to update kernel command line parameters
CoreOS/Atomic/Silverblue use "rpm-ostree kargs" to manage kernel command
line parameters.

Fixes: 86130ec ("kdumpctl: Add kdumpctl reset-crashkernel")

Reviewed-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
2022-01-05 09:40:24 +08:00
Coiby Xu
945cbbd59b add helper functions to get kernel path by kernel release and the path of current running kernel
grubby --info=kernel-path or --add-kernel=kernel-path accepts a kernel
path (e.g. /boot/vmlinuz-5.14.14-200.fc34.x86_64) instead of kernel release
(e.g 5.14.14-200.fc34.x86_64). So we need to know the kernel path given
a kernel release. Although for Fedora/RHEL, the kernel path is
"/boot/vmlinuz-<KERNEL_RELEASE>", a path kernel could also be
/boot/<machine-id>/<KERNEL_RELEASE>/vmlinuz. So the most reliable way to
find the kernel path given a kernel release is to use "grubby --info".

For osbuild, a kernel path may not yet exist but it's valid for
"grubby --update-kernel=KERNEL_PATH". For example, "grubby -info" may
output something as follows,

index=0
kernel="/var/cache/osbuild-worker/osbuild-store/tmp/tmp2prywdy5object/tree/boot/vmlinuz-5.15.10-100.fc34.x86_64"
args="ro no_timer_check net.ifnames=0 console=tty1 console=ttyS0,115200n8"
root="UUID=76a22bf4-f153-4541-b6c7-0332c0dfaeac"
initrd="/var/cache/osbuild-worker/osbuild-store/tmp/tmp2prywdy5object/tree/boot/initramfs-5.15.10-100.fc34.x86_64.img"

There is no need to check if path like
/var/cache/osbuild-worker/osbuild-store/tmp/tmp2prywdy5object/tree/boot/vmlinuz-5.15.10-100.fc34.x86_64
physically exists.

Note these helper functions doesn't support CoreOS/Atomic/Silverblue
since grubby isn't used by them.

Reviewed-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
2022-01-05 09:40:24 +08:00
Coiby Xu
3d2079c31c add helper functions to get dump mode
Add a helper function to get dump mode. The dump mode would be
 - fadump if fadump=on or fadump=nocma
 - kdump if fadump=off or empty fadump

Otherwise return 1.

Also add another helper function to return a kernel's dump mode.

Reviewed-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
2022-01-05 09:40:24 +08:00
Coiby Xu
fb9e6838ab add a helper function to read kernel cmdline parameter from grubby --info
This helper function will be used to retrieve the value of kernel
cmdline parameters including crashkernel, fadump, swiotlb and etc.

Suggested-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Pingfan Liu <piliu@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
2022-01-05 09:40:24 +08:00
Coiby Xu
796d0f6fd2 provide kdumpctl get-default-crashkernel for kdump_anaconda_addon and RPM scriptlet
Provide "kdumpctl get-default-crashkernel" for kdump_anaconda_addon
so crashkernel.default isn't needed.

When fadump is on, kdump_anaconda_addon would need to specify the dump
mode, i.e. "kdumpctl get-default-crashkernel fadump".

This interface would also be used by RPM scriptlet [1] to fetch default
crashkernel value.

[1] https://docs.fedoraproject.org/en-US/packaging-guidelines/Scriptlets/

Reviewed-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
2022-01-05 09:40:24 +08:00
Kairui Song
546c81a205 kdumpctl: remove some legacy code
It seems the save_core function and vmcore detection was used a long
time ago when kdump shares same userspace in first and second kernel.
It's now heavily deprecated (only support cp, hardcoded path, dumpoops
no longer exists) and not used.

Now vmcore will never show up in first kernel for both kdump and fadump
case, and kdumpctl is only used in first kernel, so just remove them.

Signed-off-by: Kairui Song <kasong@tencent.com>
Acked-by: Coiby Xu <coxu@redhat.com>
2021-12-31 11:37:19 +08:00
Kairui Song
0e4b66b1ab bash scripts: reformat with shfmt
This is a batch update done with:
shfmt -s -w mkfadumprd mkdumprd kdumpctl *-module-setup.sh

Clean up code style and reduce code base size, no behaviour change.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
2021-09-14 03:25:29 +08:00
Kairui Song
4f75e16700 bash scripts: declare and assign separately
Declare and assign separately to avoid masking return values:
https://github.com/koalaman/shellcheck/wiki/SC2155

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
2021-09-14 03:25:29 +08:00
Kairui Song
a4648fc851 bash scripts: fix redundant exit code check
As suggested by:
https://github.com/koalaman/shellcheck/wiki/SC2181

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
2021-09-14 03:25:29 +08:00
Kairui Song
86538ca6e2 bash scripts: fix variable quoting issue
Fixed quoting issues found by shellcheck, no feature
change. This should fix many errors when there is space
in any shell variables, eg. dump target's name/path/id.

False positives are marked with "# shellcheck disable=SCXXXX", for
example, args are expected to split so it should not be quoted.

And replaced some `cut -d ' ' -fX` with `awk '{print $X}'` since cut
is fragile, and doesn't work well with any quoted strings that have
redundant space.

Following quoting related issues are fixed (check the link
for example code and what could go wrong):

https://github.com/koalaman/shellcheck/wiki/SC2046
https://github.com/koalaman/shellcheck/wiki/SC2053
https://github.com/koalaman/shellcheck/wiki/SC2068
https://github.com/koalaman/shellcheck/wiki/SC2086
https://github.com/koalaman/shellcheck/wiki/SC2206

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
2021-09-14 03:25:29 +08:00
Kairui Song
70978c00e5 bash scripts: replace '[ ]' with '[[ ]]' for bash scripts
kdumpctl, mkdumprd, *-module-setup.sh only target bash, since they
only run in first kernel and depend on dracut, and dracut depends
on bash. So use '[[ ]]' to replace '[ ]'.

This is a batch update done with following command:
`sed -i -e 's/\(\s\)\[\s\([^]]*\)\s\]/\1\[\[\ \2 \]\]/g' kdumpctl, mkdumprd, *-module-setup.sh`
and replaced [ ... -a ... ] with [[ ... ]] && [[ ... ]] manually.

See https://tldp.org/LDP/abs/html/testconstructs.html for more details
on '[[ ]]', it's more versatile, safer, and slightly faster than '[ ]'.

This will also help shfmt to clean up the code in later commits.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
2021-09-14 03:25:29 +08:00
Kairui Song
54cc5c44be bash scripts: use $(...) notation instead of legacy ...
This is a batch update done with following command:

`sed -i -e 's/`\([^`]*\)`/\$(\1)/g' mkfadumprd mkdumprd \
 kdumpctl dracut-module-setup.sh dracut-fadump-module-setup.sh \
 dracut-early-kdump-module-setup.sh`

And manually converted some corner cases. This fixes
all related issues detected by shellcheck.
Make it easier to do clean up in later commits.

Check following link for reasons to switch to the new syntax:
https://github.com/koalaman/shellcheck/wiki/SC2006

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
2021-09-14 03:25:29 +08:00
Kairui Song
a416930706 bash scripts: always use "read -r"
This helps to strip spaces and avoid mangling backslashes:

https://github.com/koalaman/shellcheck/wiki/SC2162

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
2021-09-14 03:25:29 +08:00
Kairui Song
c4d85142be bash scripts: get rid of expr and let
As suggested by:
https://github.com/koalaman/shellcheck/wiki/SC2219

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
2021-09-14 03:25:29 +08:00
Kairui Song
6d45257cc1 bash scripts: remove useless cat
Some `cat` calls are useless, remove them to make it cleaner.
See: https://github.com/koalaman/shellcheck/wiki/SC2002

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
2021-09-14 03:25:29 +08:00
Kairui Song
80525aface kdumpctl: refine grep usage
Use `grep -q` instead of redirect to /dev/null.

Use `grep -c` instead, as suggested in:
https://github.com/koalaman/shellcheck/wiki/SC2126

Use `grep -E` instead of `egrep`.
https://github.com/koalaman/shellcheck/wiki/SC2196

Signed-off-by: Kairui Song <kasong@redhat.com>
2021-09-14 03:25:29 +08:00
Kairui Song
dfb76467c9 kdumpctl: fix fragile loops over find output
For loops over find output are fragile, use a while read loop:
https://github.com/koalaman/shellcheck/wiki/SC2044

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com
2021-09-14 03:25:29 +08:00
Kairui Song
01613b7211 kdumpctl: use kdump_get_conf_val to read config values
Also fixed kdumpctl, use `awk` instead of `cut` to read
core_collector's executable name correctly when its arguments
are not seperated by space.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
2021-09-14 03:25:29 +08:00
Kairui Song
09ccf88405 kdump-lib.sh: add a config value retrive helper
Add a helper kdump_get_conf_val to replace get_option_value.

It can help cover more corner cases in the code, like when there are
multiple spaces in config file, config value separated by a tab,
heading spaces, or trailing comments.

And this uses "sed group command" and "sed hold buffer", make it much
faster than previous `grep <config> | tail -1`.

This helper is supposed to provide a universal way for kexec-tools
scripts to read in config value. Currently, different scripts are
reading the config in many different fragile ways.

For example, following codes are found in kexec-tools script code base:
  1. grep ^force_rebuild $KDUMP_CONFIG_FILE
     echo $_force_rebuild | cut -d' '  -f2

  2. grep ^kdump_post $KDUMP_CONFIG_FILE | cut -d\  -f2

  3. awk '/^sshkey/ {print $2}' $conf_file

  4. grep ^path $KDUMP_CONFIG_FILE | cut -d' '  -f2-

1, 2, and 4 will fail if the space is replaced by, e.g. a tab

1 and 2 might fail if there are multiple spaces between config name
and config value:
"kdump_post  /var/crash/scripts/kdump-post.sh"
A space will be read instead of config value.

1, 2, 3 will fail if there are space in file path, like:
"kdump_post /var/crash/scripts dir/kdump-post.sh"

4 will fail if there are trailing comments:
"path /var/crash # some comment here"

And all will fail if there are heading space,
" path /var/crash"

And all will most likely cause problems if the config file contains
the same option more than once.

And all of them are slower than the new sed call. Old get_option_value
is also very slow and doesn't handle heading space.

Although we never claim to support heading space or tailing comments
before, it's harmless to be more robust on config reading, and many
conf files in /etc support heading spaces. And have a faster and
safer config reading helper makes it easier to clean up the code.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
2021-09-14 03:25:29 +08:00
Kairui Song
a0282ab22c kdump-lib.sh: add a config format and read helper
Add a helper `kdump_read_conf` to replace read_strip_comments.
`kdump_read_conf` does a few more things:

  - remove trailing spaces.
  - format the content, remove duplicated spaces between name and value.
  - read from KDUMP_CONFIG_FILE (/etc/kdump.conf) directly, avoid pasting
    "/etc/kdump.conf" path everywhere in the code.
  - check if config file exists, just in case.

Also unify the environmental variable, now KDUMP_CONFIG_FILE stands for
the default config location.

This helps avoid some shell pitfalls about spaces when reading config.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
2021-09-14 03:25:29 +08:00
Kairui Song
097059dedc Clear old crashkernl=auto in comment and doc
Acked-by: Pingfan Liu <piliu@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
2021-08-05 17:54:20 +08:00
Kairui Song
bcd8d6a47b kdumpctl: fix a typo
Recommanded -> Recommended

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Coiby Xu <coxu@redhat.com>
2021-07-20 15:57:05 +08:00
Kairui Song
86130ec10f kdumpctl: Add kdumpctl reset-crashkernel
In newer kernel, crashkernel.default will contain the default
crashkernel value of a kernel build. So introduce a new sub command
to help user reset kernel crashkernel size to the default value.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
2021-07-08 15:18:45 +08:00
Kairui Song
bf6671b60d fadump: kdumpctl should check the modules used by the fadump initramfs
After fadump embedded the fadump initramfs in the normal initramfs,
kdumpctl will mistakenly rebuild the initramfs everytime.

kdumpctl checks the hostonly-kernel-modules.txt file in initramfs
to check if required drivers are included, but the normal initramfs
is built in non-hostonly mode, so it doesn't have a
hostonly-kernel-modules.txt file. The check will always fail.

So let mkfadumprd make a copy of the hostonly-kernel-modules.txt in the
fadump initramfs and let kdumpctl check that file instead.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
2021-06-30 17:27:02 +08:00
Hari Bathini
fa9201b240 fadump: isolate fadump initramfs image within the default one
In case of fadump, the initramfs image has to be built to boot into
the production environment as well as to offload the active crash dump
to the specified dump target (for boot after crash). As the same image
would be used for both boot scenarios, it could not be built optimally
while accommodating both cases.

Use --include to include the initramfs image built for offloading
active crash dump to the specified dump target. Also, introduce a new
out-of-tree dracut module (99zz-fadumpinit) that installs a customized
init program while moving the default /init to /init.dracut. This
customized init program is leveraged to isolate fadump image within
the default initramfs image by kicking off default boot process
(exec /init.dracut) for regular boot scenario and activating fadump
initramfs image, if the system is booting after a crash.

If squash is available, ensure default initramfs image is also built
with squash module to reduce memory consumption in capture kernel.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-06-29 21:35:58 +08:00
Kairui Song
e9e6a2c745 kdumpctl: Add kdumpctl estimate
Add a rough esitimation support, currently, following memory usage are
checked by this sub command:

- System RAM
- Kdump Initramfs size
- Kdump Kernel image size
- Kdump Kernel module size
- Kdump userspace user and other runtime allocated memory (currently
  simply using a fixed value: 64M)
- LUKS encryption memory usage

The output of kdumpctl estimate looks like this:
  # kdumpctl estimate
  Reserved crashkernel:    256M
  Recommanded crashkernel: 160M

  Kernel image size:   47M
  Kernel modules size: 12M
  Initramfs size:      19M
  Runtime reservation: 64M
  Large modules:
      xfs: 1892352
      nouveau: 2318336

And if the kdump target is encrypted:
  # kdumpctl estimate
  Encrypted kdump target requires extra memory, assuming using the keyslot with minimun memory requirement

  Reserved crashkernel:    256M
  Recommanded crashkernel: 655M

  Kernel image size:   47M
  Kernel modules size: 12M
  Initramfs size:      19M
  Runtime reservation: 64M
  LUKS required size:  512M
  Large modules:
      xfs: 1892352
      nouveau: 2318336
  WARNING: Current crashkernel size is lower than recommanded size 655M.

The "Recommanded" value is calculated based on memory usages mentioned
above, and will be adjusted accodingly to be no less than the value provided
by kdump_get_arch_recommend_size.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2021-05-19 15:27:43 +08:00
Kairui Song
6137956f79 kdumpctl: fix check_config error when kdump.conf is empty
Kdump scirpt already have default values for core_collector, path in
many other place. Empty kdump.conf still works. Fix this corner case and
fix the error message.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2021-04-28 18:05:12 +08:00
Kelvin Fan
75bdcb7399 Write to /var/lib/kdump if $KDUMP_BOOTDIR not writable
The `/boot` directory on some operating systems might be read-only.
If we cannot write to `$KDUMP_BOOTDIR` when generating the kdump
initrd, attempt to place the generated initrd at `/var/lib/kdump`
instead.

Signed-off by: Kelvin Fan <kelvinfan001@gmail.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-04-19 16:11:17 +08:00
Pingfan Liu
596fa0a07f kdumpctl: enable secure boot on ppc64le LPARs
On ppc64le LPAR, secure-boot is a little different from bare metal,
Where
  host secure boot: /ibm,secure-boot/os-secureboot-enforcing DT property exists
while
  guest secure boot: /ibm,secure-boot >= 2

Make kexec-tools adapt to LPAR

Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-02-23 09:45:54 +08:00
Kairui Song
02202aa70f logger: source the logger file individually
Sourcing logger file in kdump-lib.sh will leak kdump helper to dracut,
because module-setup.sh will source kdump-lib.sh. This will make kdump's
function override dracut's ones, and lead to unexpected behaviours.

So include kdump-logger.sh individually and only source it where it really
needed. for module-setup.sh, simply use dracut's logger helper is good
enough so just source kdump-logger.sh in kdump only scripts.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2021-01-20 14:13:44 +08:00
Pingfan Liu
0bd0c5b9f1 kdumpctl: fix a variable expansion in check_fence_kdump_config()
Both $ipaddrs and $node can hold multiple strings, so use "" to brace them.

Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2021-01-06 13:28:46 +08:00
Kairui Song
4464bcf8f3 kdump-lib.sh: Use a more generic helper to detect omitted dracut module
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-11-30 15:25:26 +08:00
Kairui Song
647aa56b53 Fix the watchdog drivers detection code
Currently the watchdog detection code is broken already, it
get the list of active watchdog drivers, then check if they are
set in the /etc/cmdline.d/* as preload module. But after we
switched to use squash module, /etc/cmdline.d/* is not directly visible.

So just detect whether current needed driver is installed.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-11-30 15:25:19 +08:00
Kairui Song
276de0f810 Remove a redundant nfs check
In check_fs_modified, is_nfs_dump_target is already called, the dump
target can't be nfs. No need to check here.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-11-30 15:25:06 +08:00
Kairui Song
d54e5bab0f kdumpctl: split the driver detection from fs dection function
The driver detection have nothing to do with fs detection, and currently
if the dump target is raw, the block driver detection is skipped which
is wrong. Just split it out and run the block driver detection when dump
target is fs or raw.

Also simplfied the code a bit.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-11-30 15:24:45 +08:00
Lianbo Jiang
cd85fe9165 Add code comments to help better understanding
Let's add some code comments to help better understanding, and
no code changes.

Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
2020-11-12 13:59:21 +08:00
Kairui Song
b9a1f461a8 Fix error when using raw target with opalcore
Commit 08276e9 wrongly raise this warning message to error level, fix
this.

Fixes: 08276e9 ('Rework check_config and warn on any duplicated option')
Signed-off-by: Kairui Song <kasong@redhat.com>
2020-10-27 17:37:14 +08:00
Lianbo Jiang
88a8b94de9 kdumpctl: add the '-d' option to enable the kexec loading debugging messages
Currently, the kexec option '--debug/-d' is not enabled by default, which
means that users need to set it manually and wait for the next failure to
capture the additional information.

Therefore, let's enable the option '-d' for kexec loading by default.

Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2020-10-27 17:34:03 +08:00
Lianbo Jiang
3b743ae6ae enable the logger for kdump
Since the logger was introduced into kdump, let's enable it for kdump
so that we can output kdump messages according the log level and save
these messages for debugging.

Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2020-10-27 17:33:54 +08:00
Kairui Song
08276e9f7a Rework check_config and warn on any duplicated option
Instead of read and parse the kdump.conf multiple times, only read once
and use a single loop to handle the error check, which is faster.

Also check for any duplicated config otion, and error out if there are
duplicated ones.

Now it checks for following errors, most are unchanged from before:
 - Any duplicated config options. (New added)
 - Deprecated/Invalid kdump config option.
 - Duplicated kdump target, will have a different error message of
   other duplicated config options.
 - Duplicated --mount options in dracut_args.
 - Empty config values. All kdump configs should be in
   "<config_opt> <config_value>" format.
 - Check If raw target is used in fadump mode.

And removed detect of lines start with space, it will not break kdump
anyway.

The performance is measurable better than before for the check_config
function.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2020-10-27 17:07:54 +08:00
Kairui Song
a37f36ad4d Refactor kernel image and initrd detection code
kernel installation is not always in a fixed location /boot, there are
multiple different style of kernel installation, and initramfs location
changes with kernel. The two files should be detected together and adapt
to different style.

To do so we use a list of known installation destinations, and a list
of possible kernel image and initrd names. Iterate the two list to
detect the installation location of the two files. If GRUB is in use,
the BOOT_IMAGE= cmdline from GRUB will also be considered. And also
prefers user specified config if given.

Previous atomic workaround is no longer needed as the new detection
method can cover that case.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2020-08-27 11:29:17 +08:00