kexec-tools/kdumpctl
Kairui Song d54e5bab0f kdumpctl: split the driver detection from fs dection function
The driver detection have nothing to do with fs detection, and currently
if the dump target is raw, the block driver detection is skipped which
is wrong. Just split it out and run the block driver detection when dump
target is fs or raw.

Also simplfied the code a bit.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-11-30 15:24:45 +08:00

1348 lines
31 KiB
Bash
Executable File

#!/bin/bash
KEXEC=/sbin/kexec
KDUMP_KERNELVER=""
KDUMP_KERNEL=""
KDUMP_COMMANDLINE=""
KEXEC_ARGS=""
KDUMP_CONFIG_FILE="/etc/kdump.conf"
KDUMP_LOG_PATH="/var/log"
MKDUMPRD="/sbin/mkdumprd -f"
DRACUT_MODULES_FILE="/usr/lib/dracut/modules.txt"
SAVE_PATH=/var/crash
SSH_KEY_LOCATION="/root/.ssh/kdump_id_rsa"
INITRD_CHECKSUM_LOCATION="/boot/.fadump_initrd_checksum"
DUMP_TARGET=""
DEFAULT_INITRD=""
DEFAULT_INITRD_BAK=""
KDUMP_INITRD=""
TARGET_INITRD=""
FADUMP_REGISTER_SYS_NODE="/sys/kernel/fadump_registered"
#kdump shall be the default dump mode
DEFAULT_DUMP_MODE="kdump"
image_time=0
standard_kexec_args="-d -p"
# Some default values in case /etc/sysconfig/kdump doesn't include
KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug"
if [ -f /etc/sysconfig/kdump ]; then
. /etc/sysconfig/kdump
fi
[[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
. $dracutbasedir/dracut-functions.sh
. /lib/kdump/kdump-lib.sh
#initiate the kdump logger
dlog_init
if [ $? -ne 0 ]; then
echo "failed to initiate the kdump logger."
exit 1
fi
single_instance_lock()
{
local rc timeout=5
exec 9>/var/lock/kdump
if [ $? -ne 0 ]; then
derror "Create file lock failed"
exit 1
fi
flock -n 9
rc=$?
while [ $rc -ne 0 ]; do
dinfo "Another app is currently holding the kdump lock; waiting for it to exit..."
flock -w $timeout 9
rc=$?
done
}
determine_dump_mode()
{
# Check if firmware-assisted dump is enabled
# if yes, set the dump mode as fadump
if is_fadump_capable; then
dinfo "Dump mode is fadump"
DEFAULT_DUMP_MODE="fadump"
fi
ddebug "DEFAULT_DUMP_MODE=$DEFAULT_DUMP_MODE"
}
save_core()
{
coredir="/var/crash/`date +"%Y-%m-%d-%H:%M"`"
mkdir -p $coredir
ddebug "cp --sparse=always /proc/vmcore $coredir/vmcore-incomplete"
cp --sparse=always /proc/vmcore $coredir/vmcore-incomplete
if [ $? == 0 ]; then
mv $coredir/vmcore-incomplete $coredir/vmcore
dinfo "saved a vmcore to $coredir"
else
derror "failed to save a vmcore to $coredir"
fi
# pass the dmesg to Abrt tool if exists, in order
# to collect the kernel oops message.
# https://fedorahosted.org/abrt/
if [ -x /usr/bin/dumpoops ]; then
ddebug "makedumpfile --dump-dmesg $coredir/vmcore $coredir/dmesg"
makedumpfile --dump-dmesg $coredir/vmcore $coredir/dmesg >/dev/null 2>&1
ddebug "dumpoops -d $coredir/dmesg"
dumpoops -d $coredir/dmesg >/dev/null 2>&1
if [ $? == 0 ]; then
dinfo "kernel oops has been collected by abrt tool"
fi
fi
}
rebuild_fadump_initrd()
{
local target_initrd_tmp
# this file tells the initrd is fadump enabled
touch /tmp/fadump.initramfs
target_initrd_tmp="$TARGET_INITRD.tmp"
ddebug "rebuild fadump initrd: $target_initrd_tmp $DEFAULT_INITRD_BAK $KDUMP_KERNELVER"
$MKDUMPRD $target_initrd_tmp --rebuild $DEFAULT_INITRD_BAK --kver $KDUMP_KERNELVER \
-i /tmp/fadump.initramfs /etc/fadump.initramfs
if [ $? != 0 ]; then
derror "mkdumprd: failed to rebuild initrd with fadump support"
rm -f /tmp/fadump.initramfs
return 1
fi
rm -f /tmp/fadump.initramfs
# updating fadump initrd
ddebug "updating fadump initrd: $target_initrd_tmp $TARGET_INITRD"
mv $target_initrd_tmp $TARGET_INITRD
sync
return 0
}
check_earlykdump_is_enabled()
{
grep -q -w "rd.earlykdump" /proc/cmdline
return $?
}
rebuild_kdump_initrd()
{
ddebug "rebuild kdump initrd: $MKDUMPRD $TARGET_INITRD $KDUMP_KERNELVER"
$MKDUMPRD $TARGET_INITRD $KDUMP_KERNELVER
if [ $? != 0 ]; then
derror "mkdumprd: failed to make kdump initrd"
return 1
fi
if check_earlykdump_is_enabled; then
dwarn "Tips: If early kdump is enabled, also require rebuilding the system initramfs to make the changes take effect for early kdump."
fi
return 0
}
rebuild_initrd()
{
if [[ ! -w "$KDUMP_BOOTDIR" ]];then
derror "$KDUMP_BOOTDIR does not have write permission. Can not rebuild $TARGET_INITRD"
return 1
fi
if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
rebuild_fadump_initrd
else
rebuild_kdump_initrd
fi
return $?
}
#$1: the files to be checked with IFS=' '
check_exist()
{
for file in $1; do
if [ ! -e "$file" ]; then
derror "Error: $file not found."
return 1
fi
done
}
#$1: the files to be checked with IFS=' '
check_executable()
{
for file in $1; do
if [ ! -x "$file" ]; then
derror "Error: $file is not executable."
return 1
fi
done
}
backup_default_initrd()
{
ddebug "backup default initrd: $DEFAULT_INITRD"
if [ ! -f "$DEFAULT_INITRD" ]; then
return
fi
if [ ! -e $DEFAULT_INITRD_BAK ]; then
dinfo "Backing up $DEFAULT_INITRD before rebuild."
# save checksum to verify before restoring
sha1sum $DEFAULT_INITRD > $INITRD_CHECKSUM_LOCATION
cp $DEFAULT_INITRD $DEFAULT_INITRD_BAK
if [ $? -ne 0 ]; then
dwarn "WARNING: failed to backup $DEFAULT_INITRD."
rm -f $DEFAULT_INITRD_BAK
fi
fi
}
restore_default_initrd()
{
ddebug "restore default initrd: $DEFAULT_INITRD"
if [ ! -f "$DEFAULT_INITRD" ]; then
return
fi
# If a backup initrd exists, we must be switching back from
# fadump to kdump. Restore the original default initrd.
if [ -f $DEFAULT_INITRD_BAK ] && [ -f $INITRD_CHECKSUM_LOCATION ]; then
# verify checksum before restoring
backup_checksum=`sha1sum $DEFAULT_INITRD_BAK | awk '{ print $1 }'`
default_checksum=`cat $INITRD_CHECKSUM_LOCATION | awk '{ print $1 }'`
if [ "$default_checksum" != "$backup_checksum" ]; then
dwarn "WARNING: checksum mismatch! Can't restore original initrd.."
else
rm -f $INITRD_CHECKSUM_LOCATION
mv $DEFAULT_INITRD_BAK $DEFAULT_INITRD
if [[ $? -eq 0 ]]; then
derror "Restoring original initrd as fadump mode is disabled."
sync
fi
fi
fi
}
check_config()
{
local -A _opt_rec
while read config_opt config_val; do
if [ -z "$config_val" ]; then
derror "Invalid kdump config value for option $config_opt"
return 1
fi
case "$config_opt" in
dracut_args)
if [[ $config_val == *--mount* ]]; then
if [ $(echo $config_val | grep -o "\-\-mount" | wc -l) -ne 1 ]; then
derror "Multiple mount targets specified in one \"dracut_args\"."
return 1
fi
config_opt=_target
fi
;;
raw)
if [ -d "/proc/device-tree/ibm,opal/dump" ]; then
dwarn "WARNING: Won't capture opalcore when 'raw' dump target is used."
fi
config_opt=_target
;;
ext[234]|minix|btrfs|xfs|nfs|ssh)
config_opt=_target
;;
sshkey|path|core_collector|kdump_post|kdump_pre|extra_bins|extra_modules|failure_action|default|final_action|force_rebuild|force_no_rebuild|fence_kdump_args|fence_kdump_nodes)
;;
net|options|link_delay|disk_timeout|debug_mem_level|blacklist)
derror "Deprecated kdump config option: $config_opt. Refer to kdump.conf manpage for alternatives."
return 1
;;
*)
derror "Invalid kdump config option $config_opt"
return 1
;;
esac
if [ -n "${_opt_rec[$config_opt]}" ]; then
if [ $config_opt == _target ]; then
derror "More than one dump targets specified"
else
derror "Duplicated kdump config value of option $config_opt"
fi
return 1
fi
_opt_rec[$config_opt]="$config_val"
done <<< "$(read_strip_comments $KDUMP_CONFIG_FILE)"
check_failure_action_config || return 1
check_final_action_config || return 1
check_fence_kdump_config || return 1
return 0
}
# get_pcs_cluster_modified_files <image timestamp>
# return list of modified file for fence_kdump modified in Pacemaker cluster
get_pcs_cluster_modified_files()
{
local time_stamp
local modified_files
is_generic_fence_kdump && return 1
is_pcs_fence_kdump || return 1
time_stamp=`pcs cluster cib | xmllint --xpath 'string(/cib/@cib-last-written)' - | \
xargs -0 date +%s --date`
if [ -n $time_stamp -a $time_stamp -gt $image_time ]; then
modified_files="cluster-cib"
fi
if [ -f $FENCE_KDUMP_CONFIG_FILE ]; then
time_stamp=`stat -c "%Y" $FENCE_KDUMP_CONFIG_FILE`
if [ "$time_stamp" -gt "$image_time" ]; then
modified_files="$modified_files $FENCE_KDUMP_CONFIG_FILE"
fi
fi
echo $modified_files
}
setup_initrd()
{
prepare_kdump_bootinfo
if [ $? -ne 0 ]; then
derror "failed to prepare for kdump bootinfo."
return 1
fi
DEFAULT_INITRD_BAK="$KDUMP_BOOTDIR/.$(basename $DEFAULT_INITRD).default"
if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
TARGET_INITRD="$DEFAULT_INITRD"
# backup initrd for reference before replacing it
# with fadump aware initrd
backup_default_initrd
else
TARGET_INITRD="$KDUMP_INITRD"
# check if a backup of default initrd exists. If yes,
# it signifies a switch from fadump mode. So, restore
# the backed up default initrd.
restore_default_initrd
fi
}
check_files_modified()
{
local modified_files=""
#also rebuild when Pacemaker cluster conf is changed and fence kdump is enabled.
modified_files=$(get_pcs_cluster_modified_files)
EXTRA_BINS=`grep ^kdump_post $KDUMP_CONFIG_FILE | cut -d\ -f2`
CHECK_FILES=`grep ^kdump_pre $KDUMP_CONFIG_FILE | cut -d\ -f2`
HOOKS="/etc/kdump/post.d/ /etc/kdump/pre.d/"
if [ -d /etc/kdump/post.d ]; then
for file in /etc/kdump/post.d/*; do
if [ -x "$file" ]; then
POST_FILES="$POST_FILES $file"
fi
done
fi
if [ -d /etc/kdump/pre.d ]; then
for file in /etc/kdump/pre.d/*; do
if [ -x "$file" ]; then
PRE_FILES="$PRE_FILES $file"
fi
done
fi
HOOKS="$HOOKS $POST_FILES $PRE_FILES"
CORE_COLLECTOR=`grep ^core_collector $KDUMP_CONFIG_FILE | cut -d\ -f2`
CORE_COLLECTOR=`type -P $CORE_COLLECTOR`
# POST_FILES and PRE_FILES are already checked against executable, need not to check again.
EXTRA_BINS="$EXTRA_BINS $CHECK_FILES"
CHECK_FILES=`grep ^extra_bins $KDUMP_CONFIG_FILE | cut -d\ -f2-`
EXTRA_BINS="$EXTRA_BINS $CHECK_FILES"
files="$KDUMP_CONFIG_FILE $KDUMP_KERNEL $EXTRA_BINS $CORE_COLLECTOR"
[[ -e /etc/fstab ]] && files="$files /etc/fstab"
# Check for any updated extra module
EXTRA_MODULES="$(grep ^extra_modules $KDUMP_CONFIG_FILE | sed 's/^extra_modules\s*//')"
if [ -n "$EXTRA_MODULES" ]; then
if [ -e /lib/modules/$KDUMP_KERNELVER/modules.dep ]; then
files="$files /lib/modules/$KDUMP_KERNELVER/modules.dep"
fi
for _module in $EXTRA_MODULES; do
_module_file="$(modinfo --set-version "$KDUMP_KERNELVER" --filename "$_module" 2>/dev/null)"
if [[ $? -eq 0 ]]; then
files="$files $_module_file"
for _dep_modules in $(modinfo -F depends $_module | tr ',' ' '); do
files="$files $(modinfo --set-version "$KDUMP_KERNELVER" --filename $_dep_modules 2>/dev/null)"
done
else
# If it's not a module nor builtin, give an error
if ! ( modprobe --set-version "$KDUMP_KERNELVER" --dry-run "$_module" &>/dev/null ); then
dwarn "Module $_module not found"
fi
fi
done
fi
# HOOKS is mandatory and need to check the modification time
files="$files $HOOKS"
check_exist "$files" && check_executable "$EXTRA_BINS"
[ $? -ne 0 ] && return 2
for file in $files; do
if [ -e "$file" ]; then
time_stamp=`stat -c "%Y" $file`
if [ "$time_stamp" -gt "$image_time" ]; then
modified_files="$modified_files $file"
fi
if [ -L "$file" ]; then
file=$(readlink -m $file)
time_stamp=`stat -c "%Y" $file`
if [ "$time_stamp" -gt "$image_time" ]; then
modified_files="$modified_files $file"
fi
fi
else
dwarn "$file doesn't exist"
fi
done
if [ -n "$modified_files" ]; then
dinfo "Detected change(s) in the following file(s): $modified_files"
return 1
fi
return 0
}
check_drivers_modified()
{
local _target _new_drivers _old_drivers _module_name _module_filename
# If it's dump target is on block device, detect the block driver
_target=$(get_block_dump_target)
if [[ -n "$_target" ]]; then
_record_block_drivers() {
local _drivers
_drivers=$(udevadm info -a "/dev/block/$1" | sed -n 's/\s*DRIVERS=="\(\S\+\)"/\1/p')
for _driver in $_drivers; do
if ! [[ " $_new_drivers " == *" $_driver "* ]]; then
_new_drivers="$_new_drivers $_driver"
fi
done
ddebug "MAJ:MIN=$1 drivers='$_drivers'"
}
check_block_and_slaves_all _record_block_drivers "$(get_maj_min "$_target")"
fi
[ -z "$_new_drivers" ] && return 0
_old_drivers="$(lsinitrd $TARGET_INITRD -f /usr/lib/dracut/hostonly-kernel-modules.txt | tr '\n' ' ')"
ddebug "Modules required for dump target: '$_new_drivers'"
ddebug "Modules included in old initramfs: '$_old_drivers'"
for _driver in $_new_drivers; do
# Skip deprecated/invalid driver name or built-in module
_module_name=$(modinfo --set-version "$KDUMP_KERNELVER" -F name $_driver 2>/dev/null)
_module_filename=$(modinfo --set-version "$KDUMP_KERNELVER" -n $_driver 2>/dev/null)
if [ $? -ne 0 ] || [ -z "$_module_name" ] || [[ "$_module_filename" = *"(builtin)"* ]]; then
continue
fi
if ! [[ " $_old_drivers " == *" $_module_name "* ]]; then
dinfo "Detected change in block device driver, new loaded module: $_module_name"
return 1
fi
done
}
check_fs_modified()
{
local _old_dev _old_mntpoint _old_fstype
local _new_dev _new_mntpoint _new_fstype
local _target _dracut_args
# No need to check in case of mount target specified via "dracut_args".
if is_mount_in_dracut_args; then
return 0
fi
# No need to check in case of raw target.
# Currently we do not check also if ssh/nfs target is specified
if is_ssh_dump_target || is_nfs_dump_target || is_raw_dump_target; then
return 0
fi
_target=$(get_block_dump_target)
_new_fstype=$(get_fs_type_from_target $_target)
if [[ -z "$_target" ]] || [[ -z "$_new_fstype" ]];then
derror "Dump target is invalid"
return 2
fi
ddebug "_target=$_target _new_fstype=$_new_fstype"
if [[ $(expr substr $_new_fstype 1 3) = "nfs" ]];then
_new_dev=$_target
else
_new_dev=$(kdump_get_persistent_dev $_target)
if [ -z "$_new_dev" ]; then
derror "Get persistent device name failed"
return 2
fi
fi
_new_mntpoint="$(get_kdump_mntpoint_from_target $_target)"
_dracut_args=$(lsinitrd $TARGET_INITRD -f usr/lib/dracut/build-parameter.txt)
if [[ -z "$_dracut_args" ]];then
dwarn "Warning: No dracut arguments found in initrd"
return 0
fi
# if --mount argument present then match old and new target, mount
# point and file system. If any of them mismatches then rebuild
echo $_dracut_args | grep "\-\-mount" &> /dev/null
if [[ $? -eq 0 ]];then
set -- $(echo $_dracut_args | awk -F "--mount '" '{print $2}' | cut -d' ' -f1,2,3)
_old_dev=$1
_old_mntpoint=$2
_old_fstype=$3
[[ $_new_dev = $_old_dev && $_new_mntpoint = $_old_mntpoint && $_new_fstype = $_old_fstype ]] && return 0
# otherwise rebuild if target device is not a root device
else
[[ "$_target" = "$(get_root_fs_device)" ]] && return 0
fi
dinfo "Detected change in File System"
return 1
}
check_wdt_modified()
{
local -A _drivers
local _alldrivers _active _wdtdrv _wdtppath _dir
local wd_old wd_new
is_wdt_mod_omitted
[[ $? -eq 0 ]] && return 0
[[ -d /sys/class/watchdog/ ]] || return 0
# Copied logic from dracut 04watchdog/module-setup.sh::installkernel()
for _dir in /sys/class/watchdog/*; do
[[ -d "$_dir" ]] || continue
[[ -f "$_dir/state" ]] || continue
_active=$(< "$_dir/state")
[[ "$_active" = "active" ]] || continue
# device/modalias will return driver of this device
_wdtdrv=$(< "$_dir/device/modalias")
# There can be more than one module represented by same
# modalias. Currently load all of them.
# TODO: Need to find a way to avoid any unwanted module
# represented by modalias
_wdtdrv=$(modprobe --set-version "$KDUMP_KERNELVER" -R $_wdtdrv 2>/dev/null)
if [[ $_wdtdrv ]]; then
for i in $_wdtdrv; do
_drivers[$i]=1
done
fi
# however in some cases, we also need to check that if there is
# a specific driver for the parent bus/device. In such cases
# we also need to enable driver for parent bus/device.
_wdtppath=$(readlink -f "$_dir/device")
while [[ -d "$_wdtppath" ]] && [[ "$_wdtppath" != "/sys" ]]; do
_wdtppath=$(readlink -f "$_wdtppath/..")
[[ -f "$_wdtppath/modalias" ]] || continue
_wdtdrv=$(< "$_wdtppath/modalias")
_wdtdrv=$(modprobe --set-version "$KDUMP_KERNELVER" -R $_wdtdrv 2>/dev/null)
if [[ $_wdtdrv ]]; then
for i in $_wdtdrv; do
_drivers[$i]=1
done
fi
done
done
# ensure that watchdog module is loaded as early as possible
_alldrivers="${!_drivers[*]}"
[[ $_alldrivers ]] && wd_new="rd.driver.pre=${_alldrivers// /,}"
wd_old=$(lsinitrd $TARGET_INITRD -f etc/cmdline.d/00-watchdog.conf)
[[ "$wd_old" = "$wd_new" ]] && return 0
return 1
}
# returns 0 if system is not modified
# returns 1 if system is modified
# returns 2 if system modification is invalid
check_system_modified()
{
local ret
[[ -f $TARGET_INITRD ]] || return 1
check_files_modified
ret=$?
if [ $ret -ne 0 ]; then
return $ret
fi
check_fs_modified
ret=$?
if [ $ret -ne 0 ]; then
return $ret
fi
check_drivers_modified
ret=$?
if [ $ret -ne 0 ]; then
return $ret
fi
check_wdt_modified
if [ $? -ne 0 ]; then
dinfo "Detected change in watchdog state"
return 1
fi
return 0
}
check_rebuild()
{
local capture_capable_initrd="1"
local _force_rebuild force_rebuild="0"
local _force_no_rebuild force_no_rebuild="0"
local ret system_modified="0"
setup_initrd
if [ $? -ne 0 ]; then
return 1
fi
_force_no_rebuild=`grep ^force_no_rebuild $KDUMP_CONFIG_FILE 2>/dev/null`
if [ $? -eq 0 ]; then
force_no_rebuild=`echo $_force_no_rebuild | cut -d' ' -f2`
if [ "$force_no_rebuild" != "0" ] && [ "$force_no_rebuild" != "1" ];then
derror "Error: force_no_rebuild value is invalid"
return 1
fi
fi
_force_rebuild=`grep ^force_rebuild $KDUMP_CONFIG_FILE 2>/dev/null`
if [ $? -eq 0 ]; then
force_rebuild=`echo $_force_rebuild | cut -d' ' -f2`
if [ "$force_rebuild" != "0" ] && [ "$force_rebuild" != "1" ];then
derror "Error: force_rebuild value is invalid"
return 1
fi
fi
if [[ "$force_no_rebuild" == "1" && "$force_rebuild" == "1" ]]; then
derror "Error: force_rebuild and force_no_rebuild are enabled simultaneously in kdump.conf"
return 1
fi
# Will not rebuild kdump initrd
if [ "$force_no_rebuild" == "1" ]; then
return 0
fi
#check to see if dependent files has been modified
#since last build of the image file
if [ -f $TARGET_INITRD ]; then
image_time=`stat -c "%Y" $TARGET_INITRD 2>/dev/null`
#in case of fadump mode, check whether the default/target
#initrd is already built with dump capture capability
if [ "$DEFAULT_DUMP_MODE" == "fadump" ]; then
capture_capable_initrd=$(lsinitrd -f $DRACUT_MODULES_FILE $TARGET_INITRD | grep ^kdumpbase$ | wc -l)
fi
fi
check_system_modified
ret=$?
if [ $ret -eq 2 ]; then
return 1
elif [ $ret -eq 1 ];then
system_modified="1"
fi
if [ $image_time -eq 0 ]; then
dinfo "No kdump initial ramdisk found."
elif [ "$capture_capable_initrd" == "0" ]; then
dinfo "Rebuild $TARGET_INITRD with dump capture support"
elif [ "$force_rebuild" != "0" ]; then
dinfo "Force rebuild $TARGET_INITRD"
elif [ "$system_modified" != "0" ]; then
:
else
return 0
fi
dinfo "Rebuilding $TARGET_INITRD"
rebuild_initrd
return $?
}
# Load the kdump kernel specified in /etc/sysconfig/kdump
# If none is specified, try to load a kdump kernel with the same version
# as the currently running kernel.
load_kdump()
{
local ret
KEXEC_ARGS=$(prepare_kexec_args "${KEXEC_ARGS}")
KDUMP_COMMANDLINE=$(prepare_cmdline "${KDUMP_COMMANDLINE}" "${KDUMP_COMMANDLINE_REMOVE}" "${KDUMP_COMMANDLINE_APPEND}")
# For secureboot enabled machines, use new kexec file based syscall.
# Old syscall will always fail as it does not have capability to
# to kernel signature verification.
if is_secure_boot_enforced; then
dinfo "Secure Boot is enabled. Using kexec file based syscall."
KEXEC_ARGS="$KEXEC_ARGS -s"
fi
ddebug "$KEXEC $KEXEC_ARGS $standard_kexec_args --command-line=$KDUMP_COMMANDLINE --initrd=$TARGET_INITRD $KDUMP_KERNEL"
# The '12' represents an intermediate temporary file descriptor
# to store the standard error file descriptor '2', and later
# restore the error file descriptor with the file descriptor '12'
# and release it.
exec 12>&2
exec 2>> $KDUMP_LOG_PATH/kdump.log
PS4='+ $(date "+%Y-%m-%d %H:%M:%S") ${BASH_SOURCE}@${LINENO}: '
set -x
$KEXEC $KEXEC_ARGS $standard_kexec_args \
--command-line="$KDUMP_COMMANDLINE" \
--initrd=$TARGET_INITRD $KDUMP_KERNEL
ret=$?
set +x
exec 2>&12 12>&-
if [ $ret == 0 ]; then
dinfo "kexec: loaded kdump kernel"
return 0
else
derror "kexec: failed to load kdump kernel"
return 1
fi
}
check_ssh_config()
{
while read config_opt config_val; do
case "$config_opt" in
sshkey)
# remove inline comments after the end of a directive.
if [ -f "$config_val" ]; then
# canonicalize the path
SSH_KEY_LOCATION=$(/usr/bin/readlink -m $config_val)
else
dwarn "WARNING: '$config_val' doesn't exist, using default value '$SSH_KEY_LOCATION'"
fi
;;
path)
SAVE_PATH=$config_val
;;
ssh)
DUMP_TARGET=$config_val
;;
*)
;;
esac
done <<< "$(read_strip_comments $KDUMP_CONFIG_FILE)"
#make sure they've configured kdump.conf for ssh dumps
local SSH_TARGET=`echo -n $DUMP_TARGET | sed -n '/.*@/p'`
if [ -z "$SSH_TARGET" ]; then
return 1
fi
return 0
}
# ipv6 host address may takes a long time to be ready.
# Instead of checking against ipv6 address, we just check the network reachable
# by the return val of 'ssh'
check_and_wait_network_ready()
{
local start_time=$(date +%s)
local warn_once=1
local cur
local diff
local retval
local errmsg
while true; do
errmsg=$(ssh -i $SSH_KEY_LOCATION -o BatchMode=yes $DUMP_TARGET mkdir -p $SAVE_PATH 2>&1)
retval=$?
# ssh exits with the exit status of the remote command or with 255 if an error occurred
if [ $retval -eq 0 ]; then
return 0
elif [ $retval -ne 255 ]; then
derror "Could not create $DUMP_TARGET:$SAVE_PATH, you should check the privilege on server side"
return 1
fi
# if server removes the authorized_keys or, no /root/.ssh/kdump_id_rsa
ddebug "$errmsg"
echo $errmsg | grep -q "Permission denied\|No such file or directory\|Host key verification failed" &> /dev/null
if [ $? -eq 0 ]; then
derror "Could not create $DUMP_TARGET:$SAVE_PATH, you probably need to run \"kdumpctl propagate\""
return 1
fi
if [ $warn_once -eq 1 ]; then
dwarn "Network dump target is not usable, waiting for it to be ready..."
warn_once=0
fi
cur=$(date +%s)
let "diff = $cur - $start_time"
# 60s time out
if [ $diff -gt 180 ]; then
break;
fi
sleep 1
done
dinfo "Could not create $DUMP_TARGET:$SAVE_PATH, ipaddr is not ready yet. You should check network connection"
return 1
}
check_ssh_target()
{
check_and_wait_network_ready
if [ $? -ne 0 ]; then
return 1
fi
return 0
}
propagate_ssh_key()
{
check_ssh_config
if [ $? -ne 0 ]; then
derror "No ssh config specified in $KDUMP_CONFIG_FILE. Can't propagate"
exit 1
fi
local KEYFILE=$SSH_KEY_LOCATION
local errmsg="Failed to propagate ssh key"
#Check to see if we already created key, if not, create it.
if [ -f $KEYFILE ]; then
dinfo "Using existing keys..."
else
dinfo "Generating new ssh keys... "
/usr/bin/ssh-keygen -t rsa -f $KEYFILE -N "" 2>&1 > /dev/null
dinfo "done."
fi
#now find the target ssh user and server to contact.
SSH_USER=`echo $DUMP_TARGET | cut -d\ -f2 | cut -d@ -f1`
SSH_SERVER=`echo $DUMP_TARGET | sed -e's/\(.*@\)\(.*$\)/\2/'`
#now send the found key to the found server
ssh-copy-id -i $KEYFILE $SSH_USER@$SSH_SERVER
RET=$?
if [ $RET == 0 ]; then
dinfo "$KEYFILE has been added to ~$SSH_USER/.ssh/authorized_keys on $SSH_SERVER"
return 0
else
derror "$errmsg, $KEYFILE failed in transfer to $SSH_SERVER"
exit 1
fi
}
show_reserved_mem()
{
local mem=$(cat /sys/kernel/kexec_crash_size)
local mem_mb=$(expr $mem / 1024 / 1024)
dinfo "Reserved "$mem_mb"MB memory for crash kernel"
}
check_current_fadump_status()
{
# Check if firmware-assisted dump has been registered.
rc=`cat $FADUMP_REGISTER_SYS_NODE`
[ $rc -eq 1 ] && return 0
return 1
}
check_current_status()
{
if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
check_current_fadump_status
else
check_current_kdump_status
fi
return $?
}
save_raw()
{
local kdump_dir
local raw_target
raw_target=$(awk '$1 ~ /^raw$/ { print $2; }' $KDUMP_CONFIG_FILE)
[ -z "$raw_target" ] && return 0
[ -b "$raw_target" ] || {
derror "raw partition $raw_target not found"
return 1
}
check_fs=$(lsblk --nodeps -npo FSTYPE $raw_target)
if [[ $(echo $check_fs | wc -w) -ne 0 ]]; then
dwarn "Warning: Detected '$check_fs' signature on $raw_target, data loss is expected."
return 0
fi
kdump_dir=`grep ^path $KDUMP_CONFIG_FILE | cut -d' ' -f2-`
if [ -z "${kdump_dir}" ]; then
coredir="/var/crash/`date +"%Y-%m-%d-%H:%M"`"
else
coredir="${kdump_dir}/`date +"%Y-%m-%d-%H:%M"`"
fi
mkdir -p "$coredir"
[ -d "$coredir" ] || {
derror "failed to create $coredir"
return 1
}
if makedumpfile -R $coredir/vmcore <$raw_target >/dev/null 2>&1; then
# dump found
dinfo "Dump saved to $coredir/vmcore"
# wipe makedumpfile header
dd if=/dev/zero of=$raw_target bs=1b count=1 2>/dev/null
else
rm -rf "$coredir"
fi
return 0
}
local_fs_dump_target()
{
local _target
_target=$(egrep "^ext[234]|^xfs|^btrfs|^minix" /etc/kdump.conf)
if [ $? -eq 0 ]; then
echo $_target|awk '{print $2}'
fi
}
path_to_be_relabeled()
{
local _path _target _mnt="/" _rmnt
if is_user_configured_dump_target; then
if is_mount_in_dracut_args; then
return;
fi
_target=$(local_fs_dump_target)
if [[ -n "$_target" ]]; then
_mnt=$(get_mntpoint_from_target $_target)
if ! is_mounted "$_mnt"; then
return
fi
else
return
fi
fi
_path=$(get_save_path)
# if $_path is masked by other mount, we will not relabel it.
_rmnt=$(df $_mnt/$_path 2>/dev/null | tail -1 | awk '{ print $NF }')
if [ "$_rmnt" == "$_mnt" ]; then
echo $_mnt/$_path
fi
}
selinux_relabel()
{
local _path _i _attr
_path=$(path_to_be_relabeled)
if [ -z "$_path" ] || ! [ -d "$_path" ] ; then
return
fi
for _i in $(find $_path); do
_attr=$(getfattr -m "security.selinux" $_i 2>/dev/null)
if [ -z "$_attr" ]; then
restorecon $_i;
fi
done
}
check_fence_kdump_config()
{
local hostname=`hostname`
local ipaddrs=`hostname -I`
local nodes=$(get_option_value "fence_kdump_nodes")
for node in $nodes; do
if [ "$node" = "$hostname" ]; then
derror "Option fence_kdump_nodes cannot contain $hostname"
return 1
fi
# node can be ipaddr
echo $ipaddrs | grep $node > /dev/null
if [ $? -eq 0 ]; then
derror "Option fence_kdump_nodes cannot contain $node"
return 1
fi
done
return 0
}
check_dump_feasibility()
{
if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
return 0
fi
check_kdump_feasibility
return $?
}
start_fadump()
{
echo 1 > $FADUMP_REGISTER_SYS_NODE
if ! check_current_fadump_status; then
derror "fadump: failed to register"
return 1
fi
dinfo "fadump: registered successfully"
return 0
}
start_dump()
{
if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
start_fadump
else
load_kdump
fi
return $?
}
check_failure_action_config()
{
local default_option
local failure_action
local option="failure_action"
default_option=$(awk '$1 ~ /^default$/ {print $2;}' $KDUMP_CONFIG_FILE)
failure_action=$(awk '$1 ~ /^failure_action$/ {print $2;}' $KDUMP_CONFIG_FILE)
if [ -z "$failure_action" -a -z "$default_option" ]; then
return 0
elif [ -n "$failure_action" -a -n "$default_option" ]; then
derror "Cannot specify 'failure_action' and 'default' option together"
return 1
fi
if [ -n "$default_option" ]; then
option="default"
failure_action="$default_option"
fi
case "$failure_action" in
reboot|halt|poweroff|shell|dump_to_rootfs)
return 0
;;
*)
dinfo $"Usage kdump.conf: $option {reboot|halt|poweroff|shell|dump_to_rootfs}"
return 1
esac
}
check_final_action_config()
{
local final_action
final_action=$(awk '$1 ~ /^final_action$/ {print $2;}' $KDUMP_CONFIG_FILE)
if [ -z "$final_action" ]; then
return 0
else
case "$final_action" in
reboot|halt|poweroff)
return 0
;;
*)
dinfo $"Usage kdump.conf: final_action {reboot|halt|poweroff}"
return 1
esac
fi
}
start()
{
check_dump_feasibility
if [ $? -ne 0 ]; then
derror "Starting kdump: [FAILED]"
return 1
fi
check_config
if [ $? -ne 0 ]; then
derror "Starting kdump: [FAILED]"
return 1
fi
if sestatus 2>/dev/null | grep -q "SELinux status.*enabled"; then
selinux_relabel
fi
save_raw
if [ $? -ne 0 ]; then
derror "Starting kdump: [FAILED]"
return 1
fi
check_current_status
if [ $? == 0 ]; then
dwarn "Kdump already running: [WARNING]"
return 0
fi
if check_ssh_config; then
if ! check_ssh_target; then
derror "Starting kdump: [FAILED]"
return 1
fi
fi
check_rebuild
if [ $? != 0 ]; then
derror "Starting kdump: [FAILED]"
return 1
fi
start_dump
if [ $? != 0 ]; then
derror "Starting kdump: [FAILED]"
return 1
fi
dinfo "Starting kdump: [OK]"
}
reload()
{
check_current_status
if [ $? -ne 0 ]; then
dwarn "Kdump was not running: [WARNING]"
fi
if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
reload_fadump
return $?
else
stop_kdump
fi
if [ $? -ne 0 ]; then
derror "Stopping kdump: [FAILED]"
return 1
fi
dinfo "Stopping kdump: [OK]"
setup_initrd
if [ $? -ne 0 ]; then
derror "Starting kdump: [FAILED]"
return 1
fi
start_dump
if [ $? -ne 0 ]; then
derror "Starting kdump: [FAILED]"
return 1
fi
dinfo "Starting kdump: [OK]"
}
stop_fadump()
{
echo 0 > $FADUMP_REGISTER_SYS_NODE
if check_current_fadump_status; then
derror "fadump: failed to unregister"
return 1
fi
dinfo "fadump: unregistered successfully"
return 0
}
stop_kdump()
{
if is_secure_boot_enforced; then
$KEXEC -s -p -u
else
$KEXEC -p -u
fi
if [ $? != 0 ]; then
derror "kexec: failed to unload kdump kernel"
return 1
fi
dinfo "kexec: unloaded kdump kernel"
return 0
}
reload_fadump()
{
echo 1 > $FADUMP_REGISTER_SYS_NODE
if [ $? == 0 ]; then
dinfo "fadump: re-registered successfully"
return 0
else
# FADump could fail on older kernel where re-register
# support is not enabled. Try stop/start from userspace
# to handle such scenario.
stop_fadump
if [ $? == 0 ]; then
start_fadump
return $?
fi
fi
return 1
}
stop()
{
if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
stop_fadump
else
stop_kdump
fi
if [ $? != 0 ]; then
derror "Stopping kdump: [FAILED]"
return 1
fi
dinfo "Stopping kdump: [OK]"
return 0
}
rebuild() {
check_config
if [ $? -ne 0 ]; then
return 1
fi
if check_ssh_config; then
if ! check_ssh_target; then
return 1
fi
fi
setup_initrd
if [ $? -ne 0 ]; then
return 1
fi
dinfo "Rebuilding $TARGET_INITRD"
rebuild_initrd
return $?
}
if [ ! -f "$KDUMP_CONFIG_FILE" ]; then
derror "Error: No kdump config file found!"
exit 1
fi
main ()
{
# Determine if the dump mode is kdump or fadump
determine_dump_mode
case "$1" in
start)
if [ -s /proc/vmcore ]; then
save_core
reboot
else
start
fi
;;
stop)
stop
;;
status)
EXIT_CODE=0
check_current_status
case "$?" in
0)
dinfo "Kdump is operational"
EXIT_CODE=0
;;
1)
dinfo "Kdump is not operational"
EXIT_CODE=3
;;
esac
exit $EXIT_CODE
;;
reload)
reload
;;
restart)
stop
start
;;
rebuild)
rebuild
;;
condrestart)
;;
propagate)
propagate_ssh_key
;;
showmem)
show_reserved_mem
;;
*)
dinfo $"Usage: $0 {start|stop|status|restart|reload|rebuild|propagate|showmem}"
exit 1
esac
}
# Other kdumpctl instances will block in queue, until this one exits
single_instance_lock
# To avoid fd 9 leaking, we invoke a subshell, close fd 9 and call main.
# So that fd isn't leaking when main is invoking a subshell.
(exec 9<&-; main $1)
exit $?