kexec-tools/kdumpctl
Coiby Xu d5c31605f3 use grep -s to suppress error messages about nonexistent or unreadable files
When a file doesn't exist or isn't readable, grep complains as follows,

grep: /proc/cmdline: No such file or directory
grep: /etc/kernel/cmdline: No such file or directory

/proc/cmdline doesn't exist when installing package for an OS image and
/etc/kernel/cmdline may not exist if osbuild doesn't want set custom
kernel cmdline.

Use "-s" to suppress the error messages.

Fixes: 0adb0f4 ("try to reset kernel crashkernel when kexec-tools updates the default crashkernel value")
Fixes: ddd428a ("set up kernel crashkernel for osbuild in kernel hook")
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Tao Liu <ltao@redhat.com>
2022-01-07 12:20:21 +08:00

1703 lines
43 KiB
Bash
Executable File

#!/bin/bash
KEXEC=/sbin/kexec
KDUMP_KERNELVER=""
KDUMP_KERNEL=""
KDUMP_COMMANDLINE=""
KEXEC_ARGS=""
KDUMP_LOG_PATH="/var/log"
MKDUMPRD="/sbin/mkdumprd -f"
MKFADUMPRD="/sbin/mkfadumprd"
DRACUT_MODULES_FILE="/usr/lib/dracut/modules.txt"
SAVE_PATH=/var/crash
SSH_KEY_LOCATION="/root/.ssh/kdump_id_rsa"
INITRD_CHECKSUM_LOCATION="/boot/.fadump_initrd_checksum"
DUMP_TARGET=""
DEFAULT_INITRD=""
DEFAULT_INITRD_BAK=""
KDUMP_INITRD=""
TARGET_INITRD=""
FADUMP_REGISTER_SYS_NODE="/sys/kernel/fadump_registered"
#kdump shall be the default dump mode
DEFAULT_DUMP_MODE="kdump"
image_time=0
standard_kexec_args="-d -p"
# Some default values in case /etc/sysconfig/kdump doesn't include
KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug"
if [[ -f /etc/sysconfig/kdump ]]; then
. /etc/sysconfig/kdump
fi
[[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
. $dracutbasedir/dracut-functions.sh
. /lib/kdump/kdump-lib.sh
. /lib/kdump/kdump-logger.sh
#initiate the kdump logger
if ! dlog_init; then
echo "failed to initiate the kdump logger."
exit 1
fi
single_instance_lock()
{
local rc timeout=5
if ! exec 9> /var/lock/kdump; then
derror "Create file lock failed"
exit 1
fi
flock -n 9
rc=$?
while [[ $rc -ne 0 ]]; do
dinfo "Another app is currently holding the kdump lock; waiting for it to exit..."
flock -w $timeout 9
rc=$?
done
}
determine_dump_mode()
{
# Check if firmware-assisted dump is enabled
# if yes, set the dump mode as fadump
if is_fadump_capable; then
dinfo "Dump mode is fadump"
DEFAULT_DUMP_MODE="fadump"
fi
ddebug "DEFAULT_DUMP_MODE=$DEFAULT_DUMP_MODE"
}
rebuild_fadump_initrd()
{
if ! $MKFADUMPRD "$DEFAULT_INITRD_BAK" "$TARGET_INITRD" --kver "$KDUMP_KERNELVER"; then
derror "mkfadumprd: failed to make fadump initrd"
return 1
fi
return 0
}
check_earlykdump_is_enabled()
{
grep -q -w "rd.earlykdump" /proc/cmdline
return $?
}
rebuild_kdump_initrd()
{
ddebug "rebuild kdump initrd: $MKDUMPRD $TARGET_INITRD $KDUMP_KERNELVER"
if ! $MKDUMPRD "$TARGET_INITRD" "$KDUMP_KERNELVER"; then
derror "mkdumprd: failed to make kdump initrd"
return 1
fi
if check_earlykdump_is_enabled; then
dwarn "Tips: If early kdump is enabled, also require rebuilding the system initramfs to make the changes take effect for early kdump."
fi
return 0
}
rebuild_initrd()
{
if [[ ! -w $(dirname "$TARGET_INITRD") ]]; then
derror "$(dirname "$TARGET_INITRD") does not have write permission. Cannot rebuild $TARGET_INITRD"
return 1
fi
if [[ $DEFAULT_DUMP_MODE == "fadump" ]]; then
rebuild_fadump_initrd
else
rebuild_kdump_initrd
fi
return $?
}
#$1: the files to be checked with IFS=' '
check_exist()
{
for file in $1; do
if [[ ! -e $file ]]; then
derror "Error: $file not found."
return 1
fi
done
}
#$1: the files to be checked with IFS=' '
check_executable()
{
for file in $1; do
if [[ ! -x $file ]]; then
derror "Error: $file is not executable."
return 1
fi
done
}
backup_default_initrd()
{
ddebug "backup default initrd: $DEFAULT_INITRD"
if [[ ! -f $DEFAULT_INITRD ]]; then
return
fi
if [[ ! -e $DEFAULT_INITRD_BAK ]]; then
dinfo "Backing up $DEFAULT_INITRD before rebuild."
# save checksum to verify before restoring
sha1sum "$DEFAULT_INITRD" > "$INITRD_CHECKSUM_LOCATION"
if ! cp "$DEFAULT_INITRD" "$DEFAULT_INITRD_BAK"; then
dwarn "WARNING: failed to backup $DEFAULT_INITRD."
rm -f "$DEFAULT_INITRD_BAK"
fi
fi
}
restore_default_initrd()
{
ddebug "restore default initrd: $DEFAULT_INITRD"
if [[ ! -f $DEFAULT_INITRD ]]; then
return
fi
# If a backup initrd exists, we must be switching back from
# fadump to kdump. Restore the original default initrd.
if [[ -f $DEFAULT_INITRD_BAK ]] && [[ -f $INITRD_CHECKSUM_LOCATION ]]; then
# verify checksum before restoring
backup_checksum=$(sha1sum "$DEFAULT_INITRD_BAK" | awk '{ print $1 }')
default_checksum=$(awk '{ print $1 }' "$INITRD_CHECKSUM_LOCATION")
if [[ $default_checksum != "$backup_checksum" ]]; then
dwarn "WARNING: checksum mismatch! Can't restore original initrd.."
else
rm -f $INITRD_CHECKSUM_LOCATION
if mv "$DEFAULT_INITRD_BAK" "$DEFAULT_INITRD"; then
derror "Restoring original initrd as fadump mode is disabled."
sync
fi
fi
fi
}
check_config()
{
local -A _opt_rec
while read -r config_opt config_val; do
case "$config_opt" in
dracut_args)
if [[ $config_val == *--mount* ]]; then
if [[ $(echo "$config_val" | grep -o "\-\-mount" | wc -l) -ne 1 ]]; then
derror 'Multiple mount targets specified in one "dracut_args".'
return 1
fi
config_opt=_target
fi
;;
raw)
if [[ -d "/proc/device-tree/ibm,opal/dump" ]]; then
dwarn "WARNING: Won't capture opalcore when 'raw' dump target is used."
fi
config_opt=_target
;;
ext[234] | minix | btrfs | xfs | nfs | ssh)
config_opt=_target
;;
sshkey | path | core_collector | kdump_post | kdump_pre | extra_bins | extra_modules | failure_action | default | final_action | force_rebuild | force_no_rebuild | fence_kdump_args | fence_kdump_nodes) ;;
net | options | link_delay | disk_timeout | debug_mem_level | blacklist)
derror "Deprecated kdump config option: $config_opt. Refer to kdump.conf manpage for alternatives."
return 1
;;
'')
continue
;;
*)
derror "Invalid kdump config option $config_opt"
return 1
;;
esac
if [[ -z $config_val ]]; then
derror "Invalid kdump config value for option '$config_opt'"
return 1
fi
if [[ -n ${_opt_rec[$config_opt]} ]]; then
if [[ $config_opt == _target ]]; then
derror "More than one dump targets specified"
else
derror "Duplicated kdump config value of option $config_opt"
fi
return 1
fi
_opt_rec[$config_opt]="$config_val"
done <<< "$(kdump_read_conf)"
check_failure_action_config || return 1
check_final_action_config || return 1
check_fence_kdump_config || return 1
return 0
}
# get_pcs_cluster_modified_files <image timestamp>
# return list of modified file for fence_kdump modified in Pacemaker cluster
get_pcs_cluster_modified_files()
{
local time_stamp
local modified_files
is_generic_fence_kdump && return 1
is_pcs_fence_kdump || return 1
time_stamp=$(pcs cluster cib | xmllint --xpath 'string(/cib/@cib-last-written)' - | xargs -0 date +%s --date)
if [[ -n $time_stamp ]] && [[ $time_stamp -gt $image_time ]]; then
modified_files="cluster-cib"
fi
if [[ -f $FENCE_KDUMP_CONFIG_FILE ]]; then
time_stamp=$(stat -c "%Y" "$FENCE_KDUMP_CONFIG_FILE")
if [[ $time_stamp -gt $image_time ]]; then
modified_files="$modified_files $FENCE_KDUMP_CONFIG_FILE"
fi
fi
echo "$modified_files"
}
setup_initrd()
{
if ! prepare_kdump_bootinfo; then
derror "failed to prepare for kdump bootinfo."
return 1
fi
DEFAULT_INITRD_BAK="$KDUMP_BOOTDIR/.$(basename "$DEFAULT_INITRD").default"
if [[ $DEFAULT_DUMP_MODE == "fadump" ]]; then
TARGET_INITRD="$DEFAULT_INITRD"
# backup initrd for reference before replacing it
# with fadump aware initrd
backup_default_initrd
else
TARGET_INITRD="$KDUMP_INITRD"
# check if a backup of default initrd exists. If yes,
# it signifies a switch from fadump mode. So, restore
# the backed up default initrd.
restore_default_initrd
fi
}
check_files_modified()
{
local modified_files=""
#also rebuild when Pacemaker cluster conf is changed and fence kdump is enabled.
modified_files=$(get_pcs_cluster_modified_files)
EXTRA_BINS=$(kdump_get_conf_val kdump_post)
CHECK_FILES=$(kdump_get_conf_val kdump_pre)
HOOKS="/etc/kdump/post.d/ /etc/kdump/pre.d/"
if [[ -d /etc/kdump/post.d ]]; then
for file in /etc/kdump/post.d/*; do
if [[ -x $file ]]; then
POST_FILES="$POST_FILES $file"
fi
done
fi
if [[ -d /etc/kdump/pre.d ]]; then
for file in /etc/kdump/pre.d/*; do
if [[ -x $file ]]; then
PRE_FILES="$PRE_FILES $file"
fi
done
fi
HOOKS="$HOOKS $POST_FILES $PRE_FILES"
CORE_COLLECTOR=$(kdump_get_conf_val core_collector | awk '{print $1}')
CORE_COLLECTOR=$(type -P "$CORE_COLLECTOR")
# POST_FILES and PRE_FILES are already checked against executable, need not to check again.
EXTRA_BINS="$EXTRA_BINS $CHECK_FILES"
CHECK_FILES=$(kdump_get_conf_val extra_bins)
EXTRA_BINS="$EXTRA_BINS $CHECK_FILES"
files="$KDUMP_CONFIG_FILE $KDUMP_KERNEL $EXTRA_BINS $CORE_COLLECTOR"
[[ -e /etc/fstab ]] && files="$files /etc/fstab"
# Check for any updated extra module
EXTRA_MODULES="$(kdump_get_conf_val extra_modules)"
if [[ -n $EXTRA_MODULES ]]; then
if [[ -e /lib/modules/$KDUMP_KERNELVER/modules.dep ]]; then
files="$files /lib/modules/$KDUMP_KERNELVER/modules.dep"
fi
for _module in $EXTRA_MODULES; do
if _module_file="$(modinfo --set-version "$KDUMP_KERNELVER" --filename "$_module" 2> /dev/null)"; then
files="$files $_module_file"
for _dep_modules in $(modinfo -F depends "$_module" | tr ',' ' '); do
files="$files $(modinfo --set-version "$KDUMP_KERNELVER" --filename "$_dep_modules" 2> /dev/null)"
done
else
# If it's not a module nor builtin, give an error
if ! (modprobe --set-version "$KDUMP_KERNELVER" --dry-run "$_module" &> /dev/null); then
dwarn "Module $_module not found"
fi
fi
done
fi
# HOOKS is mandatory and need to check the modification time
files="$files $HOOKS"
check_exist "$files" && check_executable "$EXTRA_BINS" || return 2
for file in $files; do
if [[ -e $file ]]; then
time_stamp=$(stat -c "%Y" "$file")
if [[ $time_stamp -gt $image_time ]]; then
modified_files="$modified_files $file"
fi
if [[ -L $file ]]; then
file=$(readlink -m "$file")
time_stamp=$(stat -c "%Y" "$file")
if [[ $time_stamp -gt $image_time ]]; then
modified_files="$modified_files $file"
fi
fi
else
dwarn "$file doesn't exist"
fi
done
if [[ -n $modified_files ]]; then
dinfo "Detected change(s) in the following file(s): $modified_files"
return 1
fi
return 0
}
check_drivers_modified()
{
local _target _new_drivers _old_drivers _module_name _module_filename
# If it's dump target is on block device, detect the block driver
_target=$(get_block_dump_target)
if [[ -n $_target ]]; then
_record_block_drivers()
{
local _drivers
_drivers=$(udevadm info -a "/dev/block/$1" | sed -n 's/\s*DRIVERS=="\(\S\+\)"/\1/p')
for _driver in $_drivers; do
if ! [[ " $_new_drivers " == *" $_driver "* ]]; then
_new_drivers="$_new_drivers $_driver"
fi
done
ddebug "MAJ:MIN=$1 drivers='$_drivers'"
}
check_block_and_slaves_all _record_block_drivers "$(get_maj_min "$_target")"
fi
# Include watchdog drivers if watchdog module is not omitted
is_dracut_mod_omitted watchdog || _new_drivers+=" $(get_watchdog_drvs)"
[[ -z $_new_drivers ]] && return 0
if is_fadump_capable; then
_old_drivers="$(lsinitrd "$TARGET_INITRD" -f /usr/lib/dracut/fadump-kernel-modules.txt | tr '\n' ' ')"
else
_old_drivers="$(lsinitrd "$TARGET_INITRD" -f /usr/lib/dracut/hostonly-kernel-modules.txt | tr '\n' ' ')"
fi
ddebug "Modules required for kdump: '$_new_drivers'"
ddebug "Modules included in old initramfs: '$_old_drivers'"
for _driver in $_new_drivers; do
# Skip deprecated/invalid driver name or built-in module
_module_name=$(modinfo --set-version "$KDUMP_KERNELVER" -F name "$_driver" 2> /dev/null)
_module_filename=$(modinfo --set-version "$KDUMP_KERNELVER" -n "$_driver" 2> /dev/null)
if [[ -z $_module_name ]] || [[ -z $_module_filename ]] || [[ $_module_filename == *"(builtin)"* ]]; then
continue
fi
if ! [[ " $_old_drivers " == *" $_module_name "* ]]; then
dinfo "Detected change in block device driver, new loaded module: $_module_name"
return 1
fi
done
}
check_fs_modified()
{
local _old_dev _old_mntpoint _old_fstype
local _new_dev _new_mntpoint _new_fstype
local _target _dracut_args
# No need to check in case of mount target specified via "dracut_args".
if is_mount_in_dracut_args; then
return 0
fi
# No need to check in case of raw target.
# Currently we do not check also if ssh/nfs target is specified
if is_ssh_dump_target || is_nfs_dump_target || is_raw_dump_target; then
return 0
fi
_target=$(get_block_dump_target)
_new_fstype=$(get_fs_type_from_target "$_target")
if [[ -z $_target ]] || [[ -z $_new_fstype ]]; then
derror "Dump target is invalid"
return 2
fi
ddebug "_target=$_target _new_fstype=$_new_fstype"
_new_dev=$(kdump_get_persistent_dev "$_target")
if [[ -z $_new_dev ]]; then
perror "Get persistent device name failed"
return 2
fi
_new_mntpoint="$(get_kdump_mntpoint_from_target "$_target")"
_dracut_args=$(lsinitrd "$TARGET_INITRD" -f usr/lib/dracut/build-parameter.txt)
if [[ -z $_dracut_args ]]; then
dwarn "Warning: No dracut arguments found in initrd"
return 0
fi
# if --mount argument present then match old and new target, mount
# point and file system. If any of them mismatches then rebuild
if echo "$_dracut_args" | grep -q "\-\-mount"; then
# shellcheck disable=SC2046
set -- $(echo "$_dracut_args" | awk -F "--mount '" '{print $2}' | cut -d' ' -f1,2,3)
_old_dev=$1
_old_mntpoint=$2
_old_fstype=$3
[[ $_new_dev == "$_old_dev" && $_new_mntpoint == "$_old_mntpoint" && $_new_fstype == "$_old_fstype" ]] && return 0
# otherwise rebuild if target device is not a root device
else
[[ $_target == "$(get_root_fs_device)" ]] && return 0
fi
dinfo "Detected change in File System"
return 1
}
# returns 0 if system is not modified
# returns 1 if system is modified
# returns 2 if system modification is invalid
check_system_modified()
{
local ret
[[ -f $TARGET_INITRD ]] || return 1
check_files_modified
ret=$?
if [[ $ret -ne 0 ]]; then
return $ret
fi
check_fs_modified
ret=$?
if [[ $ret -ne 0 ]]; then
return $ret
fi
check_drivers_modified
ret=$?
if [[ $ret -ne 0 ]]; then
return $ret
fi
return 0
}
check_rebuild()
{
local capture_capable_initrd="1"
local force_rebuild force_no_rebuild
local ret system_modified="0"
setup_initrd || return 1
force_no_rebuild=$(kdump_get_conf_val force_no_rebuild)
force_no_rebuild=${force_no_rebuild:-0}
if [[ $force_no_rebuild != "0" ]] && [[ $force_no_rebuild != "1" ]]; then
derror "Error: force_no_rebuild value is invalid"
return 1
fi
force_rebuild=$(kdump_get_conf_val force_rebuild)
force_rebuild=${force_rebuild:-0}
if [[ $force_rebuild != "0" ]] && [[ $force_rebuild != "1" ]]; then
derror "Error: force_rebuild value is invalid"
return 1
fi
if [[ $force_no_rebuild == "1" && $force_rebuild == "1" ]]; then
derror "Error: force_rebuild and force_no_rebuild are enabled simultaneously in kdump.conf"
return 1
fi
# Will not rebuild kdump initrd
if [[ $force_no_rebuild == "1" ]]; then
return 0
fi
#check to see if dependent files has been modified
#since last build of the image file
if [[ -f $TARGET_INITRD ]]; then
image_time=$(stat -c "%Y" "$TARGET_INITRD" 2> /dev/null)
#in case of fadump mode, check whether the default/target
#initrd is already built with dump capture capability
if [[ $DEFAULT_DUMP_MODE == "fadump" ]]; then
capture_capable_initrd=$(lsinitrd -f $DRACUT_MODULES_FILE "$TARGET_INITRD" | grep -c -e ^kdumpbase$ -e ^zz-fadumpinit$)
fi
fi
check_system_modified
ret=$?
if [[ $ret -eq 2 ]]; then
return 1
elif [[ $ret -eq 1 ]]; then
system_modified="1"
fi
if [[ $image_time -eq 0 ]]; then
dinfo "No kdump initial ramdisk found."
elif [[ $capture_capable_initrd == "0" ]]; then
dinfo "Rebuild $TARGET_INITRD with dump capture support"
elif [[ $force_rebuild != "0" ]]; then
dinfo "Force rebuild $TARGET_INITRD"
elif [[ $system_modified != "0" ]]; then
:
else
return 0
fi
dinfo "Rebuilding $TARGET_INITRD"
rebuild_initrd
return $?
}
# On ppc64le LPARs, the keys trusted by firmware do not end up in
# .builtin_trusted_keys. So instead, add the key to the .ima keyring
function load_kdump_kernel_key()
{
# this is only called inside is_secure_boot_enforced,
# no need to retest
# this is only required if DT /ibm,secure-boot is a file.
# if it is a dir, we are on OpenPower and don't need this.
if ! [[ -f /proc/device-tree/ibm,secure-boot ]]; then
return
fi
KDUMP_KEY_ID=$(keyctl padd asymmetric kernelkey-$RANDOM %:.ima < "/usr/share/doc/kernel-keys/$KDUMP_KERNELVER/kernel-signing-ppc.cer")
}
# remove a previously loaded key. There's no real security implication
# to leaving it around, we choose to do this because it makes it easier
# to be idempotent and so as to reduce the potential for confusion.
function remove_kdump_kernel_key()
{
if [[ -z $KDUMP_KEY_ID ]]; then
return
fi
keyctl unlink "$KDUMP_KEY_ID" %:.ima
}
# Load the kdump kernel specified in /etc/sysconfig/kdump
# If none is specified, try to load a kdump kernel with the same version
# as the currently running kernel.
load_kdump()
{
local ret
KEXEC_ARGS=$(prepare_kexec_args "${KEXEC_ARGS}")
KDUMP_COMMANDLINE=$(prepare_cmdline "${KDUMP_COMMANDLINE}" "${KDUMP_COMMANDLINE_REMOVE}" "${KDUMP_COMMANDLINE_APPEND}")
# For secureboot enabled machines, use new kexec file based syscall.
# Old syscall will always fail as it does not have capability to
# to kernel signature verification.
if is_secure_boot_enforced; then
dinfo "Secure Boot is enabled. Using kexec file based syscall."
KEXEC_ARGS="$KEXEC_ARGS -s"
load_kdump_kernel_key
fi
ddebug "$KEXEC $KEXEC_ARGS $standard_kexec_args --command-line=$KDUMP_COMMANDLINE --initrd=$TARGET_INITRD $KDUMP_KERNEL"
# The '12' represents an intermediate temporary file descriptor
# to store the standard error file descriptor '2', and later
# restore the error file descriptor with the file descriptor '12'
# and release it.
exec 12>&2
exec 2>> $KDUMP_LOG_PATH/kdump.log
PS4='+ $(date "+%Y-%m-%d %H:%M:%S") ${BASH_SOURCE}@${LINENO}: '
set -x
# shellcheck disable=SC2086
$KEXEC $KEXEC_ARGS $standard_kexec_args \
--command-line="$KDUMP_COMMANDLINE" \
--initrd="$TARGET_INITRD" "$KDUMP_KERNEL"
ret=$?
set +x
exec 2>&12 12>&-
remove_kdump_kernel_key
if [[ $ret == 0 ]]; then
dinfo "kexec: loaded kdump kernel"
return 0
else
derror "kexec: failed to load kdump kernel"
return 1
fi
}
check_ssh_config()
{
local SSH_TARGET
while read -r config_opt config_val; do
case "$config_opt" in
sshkey)
# remove inline comments after the end of a directive.
if [[ -f $config_val ]]; then
# canonicalize the path
SSH_KEY_LOCATION=$(/usr/bin/readlink -m "$config_val")
else
dwarn "WARNING: '$config_val' doesn't exist, using default value '$SSH_KEY_LOCATION'"
fi
;;
path)
SAVE_PATH=$config_val
;;
ssh)
DUMP_TARGET=$config_val
;;
*) ;;
esac
done <<< "$(kdump_read_conf)"
#make sure they've configured kdump.conf for ssh dumps
SSH_TARGET=$(echo -n "$DUMP_TARGET" | sed -n '/.*@/p')
if [[ -z $SSH_TARGET ]]; then
return 1
fi
return 0
}
# ipv6 host address may takes a long time to be ready.
# Instead of checking against ipv6 address, we just check the network reachable
# by the return val of 'ssh'
check_and_wait_network_ready()
{
local start_time
local warn_once=1
local cur
local diff
local retval
local errmsg
start_time=$(date +%s)
while true; do
errmsg=$(ssh -i "$SSH_KEY_LOCATION" -o BatchMode=yes "$DUMP_TARGET" mkdir -p "$SAVE_PATH" 2>&1)
retval=$?
# ssh exits with the exit status of the remote command or with 255 if an error occurred
if [[ $retval -eq 0 ]]; then
return 0
elif [[ $retval -ne 255 ]]; then
derror "Could not create $DUMP_TARGET:$SAVE_PATH, you should check the privilege on server side"
return 1
fi
# if server removes the authorized_keys or, no /root/.ssh/kdump_id_rsa
ddebug "$errmsg"
if echo "$errmsg" | grep -q "Permission denied\|No such file or directory\|Host key verification failed"; then
derror "Could not create $DUMP_TARGET:$SAVE_PATH, you probably need to run \"kdumpctl propagate\""
return 1
fi
if [[ $warn_once -eq 1 ]]; then
dwarn "Network dump target is not usable, waiting for it to be ready..."
warn_once=0
fi
cur=$(date +%s)
diff=$((cur - start_time))
# 60s time out
if [[ $diff -gt 180 ]]; then
break
fi
sleep 1
done
dinfo "Could not create $DUMP_TARGET:$SAVE_PATH, ipaddr is not ready yet. You should check network connection"
return 1
}
check_ssh_target()
{
check_and_wait_network_ready
}
propagate_ssh_key()
{
if ! check_ssh_config; then
derror "No ssh config specified in $KDUMP_CONFIG_FILE. Can't propagate"
exit 1
fi
local KEYFILE=$SSH_KEY_LOCATION
local errmsg="Failed to propagate ssh key"
#Check to see if we already created key, if not, create it.
if [[ -f $KEYFILE ]]; then
dinfo "Using existing keys..."
else
dinfo "Generating new ssh keys... "
/usr/bin/ssh-keygen -t rsa -f "$KEYFILE" -N "" 2>&1 > /dev/null
dinfo "done."
fi
#now find the target ssh user and server to contact.
SSH_USER=$(echo "$DUMP_TARGET" | cut -d@ -f1)
SSH_SERVER=$(echo "$DUMP_TARGET" | sed -e's/\(.*@\)\(.*$\)/\2/')
#now send the found key to the found server
ssh-copy-id -i "$KEYFILE" "$SSH_USER@$SSH_SERVER"
RET=$?
if [[ $RET == 0 ]]; then
dinfo "$KEYFILE has been added to ~$SSH_USER/.ssh/authorized_keys on $SSH_SERVER"
return 0
else
derror "$errmsg, $KEYFILE failed in transfer to $SSH_SERVER"
exit 1
fi
}
show_reserved_mem()
{
local mem
local mem_mb
mem=$(< /sys/kernel/kexec_crash_size)
mem_mb=$((mem / 1024 / 1024))
dinfo "Reserved ${mem_mb}MB memory for crash kernel"
}
check_current_fadump_status()
{
# Check if firmware-assisted dump has been registered.
rc=$(< $FADUMP_REGISTER_SYS_NODE)
[[ $rc -eq 1 ]] && return 0
return 1
}
check_current_status()
{
if [[ $DEFAULT_DUMP_MODE == "fadump" ]]; then
check_current_fadump_status
else
check_current_kdump_status
fi
return $?
}
save_raw()
{
local kdump_dir
local raw_target
raw_target=$(kdump_get_conf_val raw)
[[ -z $raw_target ]] && return 0
[[ -b $raw_target ]] || {
derror "raw partition $raw_target not found"
return 1
}
check_fs=$(lsblk --nodeps -npo FSTYPE "$raw_target")
if [[ $(echo "$check_fs" | wc -w) -ne 0 ]]; then
dwarn "Warning: Detected '$check_fs' signature on $raw_target, data loss is expected."
return 0
fi
kdump_dir=$(kdump_get_conf_val path)
if [[ -z ${kdump_dir} ]]; then
coredir="/var/crash/$(date +"%Y-%m-%d-%H:%M")"
else
coredir="${kdump_dir}/$(date +"%Y-%m-%d-%H:%M")"
fi
mkdir -p "$coredir"
[[ -d $coredir ]] || {
derror "failed to create $coredir"
return 1
}
if makedumpfile -R "$coredir/vmcore" < "$raw_target" > /dev/null 2>&1; then
# dump found
dinfo "Dump saved to $coredir/vmcore"
# wipe makedumpfile header
dd if=/dev/zero of="$raw_target" bs=1b count=1 2> /dev/null
else
rm -rf "$coredir"
fi
return 0
}
local_fs_dump_target()
{
local _target
if _target=$(grep -E "^ext[234]|^xfs|^btrfs|^minix" /etc/kdump.conf); then
echo "$_target" | awk '{print $2}'
fi
}
path_to_be_relabeled()
{
local _path _target _mnt="/" _rmnt
if is_user_configured_dump_target; then
if is_mount_in_dracut_args; then
return
fi
_target=$(local_fs_dump_target)
if [[ -n $_target ]]; then
_mnt=$(get_mntpoint_from_target "$_target")
if ! is_mounted "$_mnt"; then
return
fi
else
return
fi
fi
_path=$(get_save_path)
# if $_path is masked by other mount, we will not relabel it.
_rmnt=$(df "$_mnt/$_path" 2> /dev/null | tail -1 | awk '{ print $NF }')
if [[ $_rmnt == "$_mnt" ]]; then
echo "$_mnt/$_path"
fi
}
selinux_relabel()
{
local _path _i _attr
_path=$(path_to_be_relabeled)
if [[ -z $_path ]] || ! [[ -d $_path ]]; then
return
fi
while IFS= read -r -d '' _i; do
_attr=$(getfattr -m "security.selinux" "$_i" 2> /dev/null)
if [[ -z $_attr ]]; then
restorecon "$_i"
fi
done < <(find "$_path" -print0)
}
check_fence_kdump_config()
{
local hostname
local ipaddrs
local nodes
hostname=$(hostname)
ipaddrs=$(hostname -I)
nodes=$(kdump_get_conf_val "fence_kdump_nodes")
for node in $nodes; do
if [[ $node == "$hostname" ]]; then
derror "Option fence_kdump_nodes cannot contain $hostname"
return 1
fi
# node can be ipaddr
if echo "$ipaddrs " | grep -q "$node "; then
derror "Option fence_kdump_nodes cannot contain $node"
return 1
fi
done
return 0
}
check_dump_feasibility()
{
if [[ $DEFAULT_DUMP_MODE == "fadump" ]]; then
return 0
fi
check_kdump_feasibility
return $?
}
start_fadump()
{
echo 1 > $FADUMP_REGISTER_SYS_NODE
if ! check_current_fadump_status; then
derror "fadump: failed to register"
return 1
fi
dinfo "fadump: registered successfully"
return 0
}
start_dump()
{
if [[ $DEFAULT_DUMP_MODE == "fadump" ]]; then
start_fadump
else
load_kdump
fi
return $?
}
check_failure_action_config()
{
local default_option
local failure_action
local option="failure_action"
default_option=$(kdump_get_conf_val default)
failure_action=$(kdump_get_conf_val failure_action)
if [[ -z $failure_action ]] && [[ -z $default_option ]]; then
return 0
elif [[ -n $failure_action ]] && [[ -n $default_option ]]; then
derror "Cannot specify 'failure_action' and 'default' option together"
return 1
fi
if [[ -n $default_option ]]; then
option="default"
failure_action="$default_option"
fi
case "$failure_action" in
reboot | halt | poweroff | shell | dump_to_rootfs)
return 0
;;
*)
dinfo $"Usage kdump.conf: $option {reboot|halt|poweroff|shell|dump_to_rootfs}"
return 1
;;
esac
}
check_final_action_config()
{
local final_action
final_action=$(kdump_get_conf_val final_action)
if [[ -z $final_action ]]; then
return 0
else
case "$final_action" in
reboot | halt | poweroff)
return 0
;;
*)
dinfo $"Usage kdump.conf: final_action {reboot|halt|poweroff}"
return 1
;;
esac
fi
}
start()
{
if ! check_dump_feasibility; then
derror "Starting kdump: [FAILED]"
return 1
fi
if ! check_config; then
derror "Starting kdump: [FAILED]"
return 1
fi
if sestatus 2> /dev/null | grep -q "SELinux status.*enabled"; then
selinux_relabel
fi
if ! save_raw; then
derror "Starting kdump: [FAILED]"
return 1
fi
if check_current_status; then
dwarn "Kdump already running: [WARNING]"
return 0
fi
if check_ssh_config; then
if ! check_ssh_target; then
derror "Starting kdump: [FAILED]"
return 1
fi
fi
if ! check_rebuild; then
derror "Starting kdump: [FAILED]"
return 1
fi
if ! start_dump; then
derror "Starting kdump: [FAILED]"
return 1
fi
dinfo "Starting kdump: [OK]"
}
reload()
{
if ! check_current_status; then
dwarn "Kdump was not running: [WARNING]"
fi
if [[ $DEFAULT_DUMP_MODE == "fadump" ]]; then
reload_fadump
return $?
else
if ! stop_kdump; then
derror "Stopping kdump: [FAILED]"
return 1
fi
fi
dinfo "Stopping kdump: [OK]"
if ! setup_initrd; then
derror "Starting kdump: [FAILED]"
return 1
fi
if ! start_dump; then
derror "Starting kdump: [FAILED]"
return 1
fi
dinfo "Starting kdump: [OK]"
}
stop_fadump()
{
echo 0 > $FADUMP_REGISTER_SYS_NODE
if check_current_fadump_status; then
derror "fadump: failed to unregister"
return 1
fi
dinfo "fadump: unregistered successfully"
return 0
}
stop_kdump()
{
if is_secure_boot_enforced; then
$KEXEC -s -p -u
else
$KEXEC -p -u
fi
# shellcheck disable=SC2181
if [[ $? != 0 ]]; then
derror "kexec: failed to unload kdump kernel"
return 1
fi
dinfo "kexec: unloaded kdump kernel"
return 0
}
reload_fadump()
{
if echo 1 > $FADUMP_REGISTER_SYS_NODE; then
dinfo "fadump: re-registered successfully"
return 0
else
# FADump could fail on older kernel where re-register
# support is not enabled. Try stop/start from userspace
# to handle such scenario.
if stop_fadump; then
start_fadump
return $?
fi
fi
return 1
}
stop()
{
if [[ $DEFAULT_DUMP_MODE == "fadump" ]]; then
stop_fadump
else
stop_kdump
fi
# shellcheck disable=SC2181
if [[ $? != 0 ]]; then
derror "Stopping kdump: [FAILED]"
return 1
fi
dinfo "Stopping kdump: [OK]"
return 0
}
rebuild()
{
check_config || return 1
if check_ssh_config; then
if ! check_ssh_target; then
return 1
fi
fi
setup_initrd || return 1
dinfo "Rebuilding $TARGET_INITRD"
rebuild_initrd
return $?
}
do_estimate()
{
local kdump_mods
local -A large_mods
local baseline
local kernel_size mod_size initrd_size baseline_size runtime_size reserved_size estimated_size recommended_size
local size_mb=$((1024 * 1024))
setup_initrd
if [[ ! -f $TARGET_INITRD ]]; then
derror "kdumpctl estimate: kdump initramfs is not built yet."
exit 1
fi
kdump_mods="$(lsinitrd "$TARGET_INITRD" -f /usr/lib/dracut/hostonly-kernel-modules.txt | tr '\n' ' ')"
baseline=$(kdump_get_arch_recommend_size)
if [[ ${baseline: -1} == "M" ]]; then
baseline=${baseline%M}
elif [[ ${baseline: -1} == "G" ]]; then
baseline=$((${baseline%G} * 1024))
elif [[ ${baseline: -1} == "T" ]]; then
baseline=$((${baseline%Y} * 1048576))
fi
# The default pre-reserved crashkernel value
baseline_size=$((baseline * size_mb))
# Current reserved crashkernel size
reserved_size=$(< /sys/kernel/kexec_crash_size)
# A pre-estimated value for userspace usage and kernel
# runtime allocation, 64M should good for most cases
runtime_size=$((64 * size_mb))
# Kernel image size
kernel_size=$(get_kernel_size "$KDUMP_KERNEL")
# Kdump initramfs size
initrd_size=$(du -b "$TARGET_INITRD" | awk '{print $1}')
# Kernel modules static size after loaded
mod_size=0
while read -r _name _size _; do
if [[ " $kdump_mods " != *" $_name "* ]]; then
continue
fi
mod_size=$((mod_size + _size))
# Mark module with static size larger than 2M as large module
if [[ $((_size / size_mb)) -ge 1 ]]; then
large_mods[$_name]=$_size
fi
done <<< "$(< /proc/modules)"
# Extra memory usage required for LUKS2 decryption
crypt_size=0
for _dev in $(get_all_kdump_crypt_dev); do
_crypt_info=$(cryptsetup luksDump "/dev/block/$_dev")
[[ $(echo "$_crypt_info" | sed -n "s/^Version:\s*\(.*\)/\1/p") == "2" ]] || continue
for _mem in $(echo "$_crypt_info" | sed -n "s/\sMemory:\s*\(.*\)/\1/p" | sort -n); do
crypt_size=$((crypt_size + _mem * 1024))
break
done
done
[[ $crypt_size -ne 0 ]] && echo -e "Encrypted kdump target requires extra memory, assuming using the keyslot with minimun memory requirement\n"
estimated_size=$((kernel_size + mod_size + initrd_size + runtime_size + crypt_size))
if [[ $baseline_size -gt $estimated_size ]]; then
recommended_size=$baseline_size
else
recommended_size=$estimated_size
fi
echo "Reserved crashkernel: $((reserved_size / size_mb))M"
echo "Recommended crashkernel: $((recommended_size / size_mb))M"
echo
echo "Kernel image size: $((kernel_size / size_mb))M"
echo "Kernel modules size: $((mod_size / size_mb))M"
echo "Initramfs size: $((initrd_size / size_mb))M"
echo "Runtime reservation: $((runtime_size / size_mb))M"
[[ $crypt_size -ne 0 ]] &&
echo "LUKS required size: $((crypt_size / size_mb))M"
echo -n "Large modules:"
if [[ ${#large_mods[@]} -eq 0 ]]; then
echo " <none>"
else
echo ""
for _mod in "${!large_mods[@]}"; do
echo " $_mod: ${large_mods[$_mod]}"
done
fi
if [[ $reserved_size -le $recommended_size ]]; then
echo "WARNING: Current crashkernel size is lower than recommended size $((recommended_size / size_mb))M."
fi
}
get_default_crashkernel()
{
local _dump_mode=$1
kdump_get_arch_recommend_crashkernel "$_dump_mode"
}
# Read kernel cmdline parameter for a specific kernel
# $1: kernel path, DEFAULT or kernel path, ALL not accepted
# $2: kernel cmldine parameter
get_grub_kernel_boot_parameter()
{
local _kernel_path=$1 _para=$2
[[ $_kernel_path == ALL ]] && derror "kernel_path=ALL invalid for get_grub_kernel_boot_parameter" && return 1
grubby --info="$_kernel_path" | sed -En -e "/^args=.*$/{s/^.*(\s|\")${_para}=(\S*).*\"$/\2/p;q}"
}
# get dump mode by fadump value
# return
# - fadump, if fadump=on or fadump=nocma
# - kdump, if fadump=off or empty fadump, return kdump
# - error if otherwise
get_dump_mode_by_fadump_val()
{
local _fadump_val=$1
if [[ -z $_fadump_val ]] || [[ $_fadump_val == off ]]; then
echo -n kdump
elif [[ $_fadump_val == on ]] || [[ $_fadump_val == nocma ]]; then
echo -n fadump
else
derror "invalid fadump=$_fadump_val"
return 1
fi
}
# get dump mode of a specific kernel
# based on its fadump kernel cmdline parameter
get_dump_mode_by_kernel()
{
local _kernel_path=$1 _fadump_val _dump_mode
_fadump_val=$(get_grub_kernel_boot_parameter "$_kernel_path" fadump)
if _dump_mode=$(get_dump_mode_by_fadump_val "$_fadump_val"); then
echo -n "$_dump_mode"
else
derror "failed to get dump mode for kernel $_kernel_path"
exit
fi
}
_filter_grubby_kernel_str()
{
local _grubby_kernel_str=$1
echo -n "$_grubby_kernel_str" | sed -n -e 's/^kernel="\(.*\)"/\1/p'
}
_find_kernel_path_by_release()
{
local _release="$1" _grubby_kernel_str _kernel_path
_grubby_kernel_str=$(grubby --info ALL | grep "^kernel=.*$_release")
_kernel_path=$(_filter_grubby_kernel_str "$_grubby_kernel_str")
if [[ -z $_kernel_path ]]; then
derror "kernel $_release doesn't exist"
return 1
fi
echo -n "$_kernel_path"
}
_get_current_running_kernel_path()
{
local _release _path
_release=$(uname -r)
if _path=$(_find_kernel_path_by_release "$_release"); then
echo -n "$_path"
else
return 1
fi
}
_update_grub()
{
local _kernel_path=$1 _crashkernel=$2 _dump_mode=$3 _fadump_val=$4
if is_atomic; then
if rpm-ostree kargs | grep -q "crashkernel="; then
rpm-ostree kargs --replace="crashkernel=$_crashkernel"
else
rpm-ostree kargs --append="crashkernel=$_crashkernel"
fi
else
[[ -f /etc/zipl.conf ]] && zipl_arg="--zipl"
grubby --args "crashkernel=$_crashkernel" --update-kernel "$_kernel_path" $zipl_arg
if [[ $_dump_mode == kdump ]]; then
grubby --remove-args="fadump" --update-kernel "$_kernel_path"
else
grubby --args="fadump=$_fadump_val" --update-kernel "$_kernel_path"
fi
fi
[[ $zipl_arg ]] && zipl > /dev/null
}
_valid_grubby_kernel_path()
{
[[ -n "$1" ]] && grubby --info="$1" > /dev/null 2>&1
}
_get_all_kernels_from_grubby()
{
local _kernels _line _kernel_path _grubby_kernel_path=$1
for _line in $(grubby --info "$_grubby_kernel_path" | grep "^kernel="); do
_kernel_path=$(_filter_grubby_kernel_str "$_line")
_kernels="$_kernels $_kernel_path"
done
echo -n "$_kernels"
}
GRUB_ETC_DEFAULT="/etc/default/grub"
# modify the kernel command line parameter in default grub conf
#
# $1: the name of the kernel command line parameter
# $2: new value. If empty, the parameter would be removed
_update_kernel_cmdline_in_grub_etc_default()
{
local _para=$1 _val=$2 _para_val _regex
if [[ -n $_val ]]; then
_para_val="$_para=$_val"
fi
_regex='^(GRUB_CMDLINE_LINUX=.*)([[:space:]"])'"$_para"'=[^[:space:]"]*(.*)$'
if grep -q -E "$_regex" "$GRUB_ETC_DEFAULT"; then
sed -i -E 's/'"$_regex"'/\1\2'"$_para_val"'\3/' "$GRUB_ETC_DEFAULT"
elif [[ -n $_para_val ]]; then
# If the kernel parameter doesn't exist, put it in the first
sed -i -E 's/^(GRUB_CMDLINE_LINUX=")/\1'"$_para_val"' /' "$GRUB_ETC_DEFAULT"
fi
}
reset_crashkernel()
{
local _opt _val _dump_mode _fadump_val _reboot _grubby_kernel_path _kernel _kernels
local _old_crashkernel _new_crashkernel _new_dump_mode _crashkernel_changed
local _new_fadump_val _old_fadump_val _what_is_updated
for _opt in "$@"; do
case "$_opt" in
--fadump=*)
_val=${_opt#*=}
if _dump_mode=$(get_dump_mode_by_fadump_val $_val); then
_fadump_val=$_val
else
derror "failed to determine dump mode"
exit
fi
;;
--kernel=*)
_val=${_opt#*=}
if ! _valid_grubby_kernel_path $_val; then
derror "Invalid $_opt, please specify a valid kernel path, ALL or DEFAULT"
exit
fi
_grubby_kernel_path=$_val
;;
--reboot)
_reboot=yes
;;
*)
derror "$_opt not recognized"
exit 1
;;
esac
done
# 1. CoreOS uses "rpm-ostree kargs" instead of grubby to manage kernel command
# line. --kernel=ALL doesn't make sense for CoreOS.
# 2. CoreOS doesn't support POWER so the dump mode is always kdump.
# 3. "rpm-ostree kargs" would prompt the user to reboot the system after
# modifying the kernel command line so there is no need for kexec-tools
# to repeat it.
if is_atomic; then
_old_crashkernel=$(rpm-ostree kargs | sed -n -E 's/.*(^|\s)crashkernel=(\S*).*/\2/p')
_new_dump_mode=kdump
_new_crashkernel=$(kdump_get_arch_recommend_crashkernel "$_new_dump_mode")
if [[ $_old_crashkernel != "$_new_crashkernel" ]]; then
_update_grub "" "$_new_crashkernel" "$_new_dump_mode" ""
if [[ $_reboot == yes ]]; then
systemctl reboot
fi
fi
return
fi
# For non-ppc64le systems, the dump mode is always kdump since only ppc64le
# has FADump.
if [[ -z $_dump_mode && $(uname -m) != ppc64le ]]; then
_dump_mode=kdump
_fadump_val=off
fi
# If the dump mode is determined, we can also know the default crashkernel value
if [[ -n $_dump_mode ]]; then
_crashkernel=$(kdump_get_arch_recommend_crashkernel "$_dump_mode")
fi
# If --kernel-path=ALL, update GRUB_CMDLINE_LINUX in /etc/default/grub.
#
# An exception case is when the ppc64le user doesn't specify the fadump value.
# In this case, the dump mode would be determined by parsing the kernel
# command line of the kernel(s) to be updated thus don't update GRUB_CMDLINE_LINUX.
#
# The following code has been simplified because of what has been done early,
# - set the dump mode as kdump for non-ppc64le cases
# - retrieved the default crashkernel value for given dump mode
if [[ $_grubby_kernel_path == ALL && -n $_dump_mode ]]; then
_update_kernel_cmdline_in_grub_etc_default crashkernel "$_crashkernel"
# remove the fadump if fadump is disabled
[[ $_fadump_val == off ]] && _fadump_val=""
_update_kernel_cmdline_in_grub_etc_default fadump "$_fadump_val"
fi
# If kernel-path not specified, either
# - use KDUMP_KERNELVER if it's defined
# - use current running kernel
if [[ -z $_grubby_kernel_path ]]; then
if [[ -z $KDUMP_KERNELVER ]] ||
! _kernel_path=$(_find_kernel_path_by_release "$KDUMP_KERNELVER"); then
if ! _kernel_path=$(_get_current_running_kernel_path); then
derror "no running kernel found"
exit 1
fi
fi
_kernels=$_kernel_path
else
_kernels=$(_get_all_kernels_from_grubby "$_grubby_kernel_path")
fi
for _kernel in $_kernels; do
if [[ -z $_dump_mode ]]; then
_new_dump_mode=$(get_dump_mode_by_kernel "$_kernel")
_new_crashkernel=$(kdump_get_arch_recommend_crashkernel "$_new_dump_mode")
_new_fadump_val=$(get_grub_kernel_boot_parameter "$_kernel" fadump)
else
_new_dump_mode=$_dump_mode
_new_crashkernel=$_crashkernel
_new_fadump_val=$_fadump_val
fi
_old_crashkernel=$(get_grub_kernel_boot_parameter "$_kernel" crashkernel)
_old_fadump_val=$(get_grub_kernel_boot_parameter "$_kernel" fadump)
if [[ $_old_crashkernel != "$_new_crashkernel" || $_old_fadump_val != "$_new_fadump_val" ]]; then
_update_grub "$_kernel" "$_new_crashkernel" "$_new_dump_mode" "$_new_fadump_val"
if [[ $_reboot != yes ]]; then
if [[ $_old_crashkernel != "$_new_crashkernel" ]]; then
_what_is_updated="Updated crashkernel=$_new_crashkernel"
else
# This case happens only when switching between fadump=on and fadump=nocma
_what_is_updated="Updated fadump=$_new_fadump_val"
fi
dwarn "$_what_is_updated for kernel=$_kernel. Please reboot the system for the change to take effect."
fi
_crashkernel_changed=yes
fi
done
if [[ $_reboot == yes && $_crashkernel_changed == yes ]]; then
reboot
fi
}
# shellcheck disable=SC2154 # false positive when dereferencing an array
reset_crashkernel_after_update()
{
local _kernel _crashkernel _dump_mode _fadump_val _old_default_crashkernel _new_default_crashkernel
declare -A _crashkernel_vals
_crashkernel_vals[old_kdump]=$(cat /tmp/old_default_crashkernel 2> /dev/null)
_crashkernel_vals[old_fadump]=$(cat /tmp/old_default_crashkernel_fadump 2> /dev/null)
_crashkernel_vals[new_kdump]=$(get_default_crashkernel kdump)
_crashkernel_vals[new_fadump]=$(get_default_crashkernel fadump)
for _kernel in $(_get_all_kernels_from_grubby); do
_crashkernel=$(get_grub_kernel_boot_parameter "$_kernel" crashkernel)
if [[ $_crashkernel == auto ]]; then
reset_crashkernel "--kernel=$_kernel"
elif [[ -n $_crashkernel ]]; then
_dump_mode=$(get_dump_mode_by_kernel "$_kernel")
_old_default_crashkernel=${_crashkernel_vals[old_${_dump_mode}]}
_new_default_crashkernel=${_crashkernel_vals[new_${_dump_mode}]}
if [[ $_crashkernel == "$_old_default_crashkernel" ]] &&
[[ $_new_default_crashkernel != "$_old_default_crashkernel" ]]; then
_fadump_val=$(get_grub_kernel_boot_parameter "$_kernel" fadump)
if _update_grub "$_kernel" "$_new_default_crashkernel" "$_dump_mode" "$_fadump_val"; then
echo "For kernel=$_kernel, crashkernel=$_new_default_crashkernel now."
fi
fi
fi
done
}
_is_osbuild()
{
[[ $(sed -n -E 's/.*(^|\s)container=(\S*).*/\2/p' < /proc/1/environ) == bwrap-osbuild ]]
}
reset_crashkernel_for_installed_kernel()
{
local _installed_kernel _running_kernel _crashkernel _crashkernel_running
local _dump_mode_running _fadump_val_running
if ! _installed_kernel=$(_find_kernel_path_by_release "$1"); then
exit 1
fi
if _is_osbuild && ! grep -qs crashkernel= /etc/kernel/cmdline; then
reset_crashkernel "--kernel=$_installed_kernel"
return
fi
if ! _running_kernel=$(_get_current_running_kernel_path); then
derror "Couldn't find current running kernel"
exit
fi
_crashkernel=$(get_grub_kernel_boot_parameter "$_installed_kernel" crashkernel)
_crashkernel_running=$(get_grub_kernel_boot_parameter "$_running_kernel" crashkernel)
_dump_mode_running=$(get_dump_mode_by_kernel "$_running_kernel")
_fadump_val_running=$(get_grub_kernel_boot_parameter "$_kernel" fadump)
if [[ $_crashkernel != "$_crashkernel_running" ]]; then
if _update_grub "$_installed_kernel" "$_crashkernel_running" "$_dump_mode_running" "$_fadump_val_running"; then
echo "kexec-tools has reset $_installed_kernel to use the new default crashkernel value $_crashkernel_running"
fi
fi
}
if [[ ! -f $KDUMP_CONFIG_FILE ]]; then
derror "Error: No kdump config file found!"
exit 1
fi
main()
{
# Determine if the dump mode is kdump or fadump
determine_dump_mode
case "$1" in
start)
start
;;
stop)
stop
;;
status)
EXIT_CODE=0
check_current_status
case "$?" in
0)
dinfo "Kdump is operational"
EXIT_CODE=0
;;
1)
dinfo "Kdump is not operational"
EXIT_CODE=3
;;
esac
exit $EXIT_CODE
;;
reload)
reload
;;
restart)
stop
start
;;
rebuild)
rebuild
;;
condrestart) ;;
propagate)
propagate_ssh_key
;;
showmem)
show_reserved_mem
;;
estimate)
do_estimate
;;
get-default-crashkernel)
get_default_crashkernel "$2"
;;
reset-crashkernel)
shift
reset_crashkernel "$@"
;;
reset-crashkernel-after-update)
if [[ $(kdump_get_conf_val auto_reset_crashkernel) != no ]]; then
reset_crashkernel_after_update
fi
;;
reset-crashkernel-for-installed_kernel)
if [[ $(kdump_get_conf_val auto_reset_crashkernel) != no ]]; then
reset_crashkernel_for_installed_kernel "$2"
fi
;;
*)
dinfo $"Usage: $0 {estimate|start|stop|status|restart|reload|rebuild|reset-crashkernel|propagate|showmem}"
exit 1
;;
esac
}
# Other kdumpctl instances will block in queue, until this one exits
single_instance_lock
# To avoid fd 9 leaking, we invoke a subshell, close fd 9 and call main.
# So that fd isn't leaking when main is invoking a subshell.
(
exec 9<&-
main "$@"
)
exit $?