fafb76e791
* Tue Sep 09 2025 Scott Weaver <scweaver@redhat.com> [6.12.0-127.el10] - s390/hypfs: Enable limited access during lockdown (Mete Durlu) [RHEL-111203] - s390/hypfs: Avoid unnecessary ioctl registration in debugfs (Mete Durlu) [RHEL-111203] - hwmon: Add static visibility member to struct hwmon_ops (CKI Backport Bot) [RHEL-105091] - dpll: zl3073x: ZL3073X_I2C and ZL3073X_SPI should depend on NET (Ivan Vecera) [RHEL-104973] - dpll: Make ZL3073X invisible (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Fix build failure (Ivan Vecera) [RHEL-104973] - redhat/configs: enable CONFIG_ZL3073X* (Ivan Vecera) [RHEL-104973] - redhat/configs: enable CONFIG_I2C_MUX_PCA954x on x86 (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Add support to get fractional frequency offset (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Add support to adjust phase (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Implement phase offset monitor feature (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Add support to get phase offset on connected input pin (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Add support to get/set esync on pins (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Add support to get/set frequency on pins (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Implement input pin state setting in automatic mode (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Add support to get/set priority on input pins (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Implement input pin selection in manual mode (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Register DPLL devices and pins (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Read DPLL types and pin properties from system firmware (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Fetch invariants during probe (Ivan Vecera) [RHEL-104973] - dpll: Add basic Microchip ZL3073x support (Ivan Vecera) [RHEL-104973] - dt-bindings: dpll: Add support for Microchip Azurite chip family (Ivan Vecera) [RHEL-104973] - dt-bindings: dpll: Add DPLL device and pin (Ivan Vecera) [RHEL-104973] - x86/CPU/AMD: Ignore invalid reset reason value (Steve Best) [RHEL-101301] - x86/CPU/AMD: Add X86_FEATURE_ZEN6 (Steve Best) [RHEL-106911] - x86/cpufeatures: Free up unused feature bits (Steve Best) [RHEL-106911] - intel_idle: Allow loading ACPI tables for any family (Steve Best) [RHEL-110839] - intel_idle: Update arguments of mwait_idle_with_hints() (Steve Best) [RHEL-110839] - intel_idle: Rescan "dead" SMT siblings during initialization (Steve Best) [RHEL-110839] - x86/smp: PM/hibernate: Split arch_resume_nosmt() (Steve Best) [RHEL-110839] - intel_idle: Use subsys_initcall_sync() for initialization (Steve Best) [RHEL-110839] - intel_idle: Add C1 demotion on/off sysfs knob (Steve Best) [RHEL-110839] - Move FCH header to a location accessible by all archs (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Add PCSpecialist Lafite Pro V 14M to 8042 quirks list (Steve Best) [RHEL-103121] - platform/x86/amd: pmc: Clear metrics table at start of cycle (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Declare quirk_spurious_8042 for MECHREVO Wujie 14XA (GX4HRXL) (Steve Best) [RHEL-103121] - platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles (Steve Best) [RHEL-103121] - x86/platform/amd: Move the <asm/amd_nb.h> header to <asm/amd/nb.h> (Steve Best) [RHEL-103121] - x86/mce/amd: Remove shared threshold bank plumbing (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: fix leak in probe() (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Use managed APIs for mutex (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Remove unnecessary line breaks (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Move macros and structures to the PMC header file (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Notify user when platform does not support s0ix transition (Steve Best) [RHEL-103121] - platform/x86: amd: Use *-y instead of *-objs in Makefiles [partial] (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Only disable IRQ1 wakeup where i8042 actually enabled it (Steve Best) [RHEL-103121] - platform/x86/amd: pmc: Use guard(mutex) (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Add STB support for AMD Desktop variants (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Update S2D message id for 1Ah Family 70h model (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Update IP information structure for newer SoCs (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Use ARRAY_SIZE() to fill num_ips information (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Isolate STB code changes to a new file (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Define enum for S2D/PMC msg_port and add helper function (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Update function names to align with new STB file (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Move STB functionality to a new file for better code organization (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Move STB block into amd_pmc_s2d_init() (Steve Best) [RHEL-103121] - docs: core-api: document the IOVA-based API (Eder Zulian) [RHEL-73606] - dma-mapping: add a dma_need_unmap helper (Eder Zulian) [RHEL-73606] - dma-mapping: Implement link/unlink ranges API (Eder Zulian) [RHEL-73606] - iommu/dma: Factor out a iommu_dma_map_swiotlb helper (Eder Zulian) [RHEL-73606] - dma-mapping: Provide an interface to allow allocate IOVA (Eder Zulian) [RHEL-73606] - iommu: add kernel-doc for iommu_unmap_fast (Eder Zulian) [RHEL-73606] - iommu: generalize the batched sync after map interface (Eder Zulian) [RHEL-73606] - dma-mapping: move the PCI P2PDMA mapping helpers to pci-p2pdma.h (Eder Zulian) [RHEL-73606] - PCI/P2PDMA: Refactor the p2pdma mapping helpers (Eder Zulian) [RHEL-73606] - s390/ism: fix concurrency management in ism_cmd() (Mete Durlu) [RHEL-110207] - redhat/configs: Enable CONFIG_X86_BUS_LOCK_DETECT (John Allen) [RHEL-50321] - x86/bus_lock: Add support for AMD (John Allen) [RHEL-50321] - x86/split_lock: Move Split and Bus lock code to a dedicated file (John Allen) [RHEL-50321] Resolves: RHEL-101301, RHEL-103121, RHEL-104973, RHEL-105091, RHEL-106911, RHEL-110207, RHEL-110839, RHEL-111203, RHEL-50321, RHEL-73606 Signed-off-by: Scott Weaver <scweaver@redhat.com>
91 lines
2.8 KiB
Makefile
91 lines
2.8 KiB
Makefile
RHEL_MAJOR = 10
|
|
RHEL_MINOR = 2
|
|
|
|
#
|
|
# RHEL_RELEASE
|
|
# -------------
|
|
#
|
|
# Represents build number in 'release' part of RPM's name-version-release.
|
|
# name is <package_name>, e.g. kernel
|
|
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
|
|
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
RHEL_RELEASE = 127
|
|
|
|
#
|
|
# RHEL_REBASE_NUM
|
|
# ----------------
|
|
#
|
|
# Used in RPM version string for Gemini kernels, which dont use upstream
|
|
# VERSION/PATCHLEVEL/SUBLEVEL. The number represents rebase number for
|
|
# current MAJOR release.
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
RHEL_REBASE_NUM = 1
|
|
|
|
|
|
#
|
|
# ZSTREAM
|
|
# -------
|
|
#
|
|
# This variable controls whether we use zstream numbering or not for the
|
|
# package release. The zstream release keeps the build number of the last
|
|
# build done for ystream for the Beta milestone, and increments a second
|
|
# number for each build. The third number is used for branched builds
|
|
# (eg.: for builds with security fixes or hot fixes done outside of the
|
|
# batch release process).
|
|
#
|
|
# For example, with ZSTREAM unset or set to "no", all builds will contain
|
|
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
|
|
# where X is the build number. With ZSTREAM set to "yes", we will have
|
|
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
|
|
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
|
|
# build number and Z will always be 1 except if you're doing a branched build
|
|
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
|
|
# number will be incremented instead of the Y).
|
|
#
|
|
ZSTREAM ?= no
|
|
|
|
#
|
|
# Early y+1 numbering
|
|
# --------------------
|
|
#
|
|
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
|
|
# First is RHEL_RELEASE inherited/merged from y as-is, second number
|
|
# is incremented with each build starting from 1. After merge from y,
|
|
# it resets back to 1. This way y+1 nvr reflects status of last merge.
|
|
#
|
|
# Example:
|
|
#
|
|
# rhel8.0 rhel-8.1
|
|
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
|
|
# kernel-4.18.0-58.2.el8
|
|
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
|
|
# kernel-4.18.0-60.el8
|
|
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
|
|
#
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
EARLY_YSTREAM ?= no
|
|
EARLY_YBUILD:=
|
|
EARLY_YRELEASE:=
|
|
ifneq ("$(ZSTREAM)", "yes")
|
|
ifeq ("$(EARLY_YSTREAM)","yes")
|
|
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
|
|
endif
|
|
endif
|
|
|
|
#
|
|
# Automotive
|
|
# ----------
|
|
#
|
|
# Represents the major and minor release used by automotive.
|
|
# Primarily this is used to to identify the build target when
|
|
# building the kernel-automotive packages.
|
|
AUTOMOTIVE_MAJOR = 2
|
|
AUTOMOTIVE_MINOR = 0
|