kernel-6.12.0-127.el10

* Tue Sep 09 2025 Scott Weaver <scweaver@redhat.com> [6.12.0-127.el10] - s390/hypfs: Enable limited access during lockdown (Mete Durlu) [RHEL-111203] - s390/hypfs: Avoid unnecessary ioctl registration in debugfs (Mete Durlu) [RHEL-111203] - hwmon: Add static visibility member to struct hwmon_ops (CKI Backport Bot) [RHEL-105091] - dpll: zl3073x: ZL3073X_I2C and ZL3073X_SPI should depend on NET (Ivan Vecera) [RHEL-104973] - dpll: Make ZL3073X invisible (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Fix build failure (Ivan Vecera) [RHEL-104973] - redhat/configs: enable CONFIG_ZL3073X* (Ivan Vecera) [RHEL-104973] - redhat/configs: enable CONFIG_I2C_MUX_PCA954x on x86 (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Add support to get fractional frequency offset (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Add support to adjust phase (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Implement phase offset monitor feature (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Add support to get phase offset on connected input pin (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Add support to get/set esync on pins (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Add support to get/set frequency on pins (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Implement input pin state setting in automatic mode (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Add support to get/set priority on input pins (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Implement input pin selection in manual mode (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Register DPLL devices and pins (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Read DPLL types and pin properties from system firmware (Ivan Vecera) [RHEL-104973] - dpll: zl3073x: Fetch invariants during probe (Ivan Vecera) [RHEL-104973] - dpll: Add basic Microchip ZL3073x support (Ivan Vecera) [RHEL-104973] - dt-bindings: dpll: Add support for Microchip Azurite chip family (Ivan Vecera) [RHEL-104973] - dt-bindings: dpll: Add DPLL device and pin (Ivan Vecera) [RHEL-104973] - x86/CPU/AMD: Ignore invalid reset reason value (Steve Best) [RHEL-101301] - x86/CPU/AMD: Add X86_FEATURE_ZEN6 (Steve Best) [RHEL-106911] - x86/cpufeatures: Free up unused feature bits (Steve Best) [RHEL-106911] - intel_idle: Allow loading ACPI tables for any family (Steve Best) [RHEL-110839] - intel_idle: Update arguments of mwait_idle_with_hints() (Steve Best) [RHEL-110839] - intel_idle: Rescan "dead" SMT siblings during initialization (Steve Best) [RHEL-110839] - x86/smp: PM/hibernate: Split arch_resume_nosmt() (Steve Best) [RHEL-110839] - intel_idle: Use subsys_initcall_sync() for initialization (Steve Best) [RHEL-110839] - intel_idle: Add C1 demotion on/off sysfs knob (Steve Best) [RHEL-110839] - Move FCH header to a location accessible by all archs (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Add PCSpecialist Lafite Pro V 14M to 8042 quirks list (Steve Best) [RHEL-103121] - platform/x86/amd: pmc: Clear metrics table at start of cycle (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Declare quirk_spurious_8042 for MECHREVO Wujie 14XA (GX4HRXL) (Steve Best) [RHEL-103121] - platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles (Steve Best) [RHEL-103121] - x86/platform/amd: Move the <asm/amd_nb.h> header to <asm/amd/nb.h> (Steve Best) [RHEL-103121] - x86/mce/amd: Remove shared threshold bank plumbing (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: fix leak in probe() (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Use managed APIs for mutex (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Remove unnecessary line breaks (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Move macros and structures to the PMC header file (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Notify user when platform does not support s0ix transition (Steve Best) [RHEL-103121] - platform/x86: amd: Use *-y instead of *-objs in Makefiles [partial] (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Only disable IRQ1 wakeup where i8042 actually enabled it (Steve Best) [RHEL-103121] - platform/x86/amd: pmc: Use guard(mutex) (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Add STB support for AMD Desktop variants (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Update S2D message id for 1Ah Family 70h model (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Update IP information structure for newer SoCs (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Use ARRAY_SIZE() to fill num_ips information (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Isolate STB code changes to a new file (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Define enum for S2D/PMC msg_port and add helper function (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Update function names to align with new STB file (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Move STB functionality to a new file for better code organization (Steve Best) [RHEL-103121] - platform/x86/amd/pmc: Move STB block into amd_pmc_s2d_init() (Steve Best) [RHEL-103121] - docs: core-api: document the IOVA-based API (Eder Zulian) [RHEL-73606] - dma-mapping: add a dma_need_unmap helper (Eder Zulian) [RHEL-73606] - dma-mapping: Implement link/unlink ranges API (Eder Zulian) [RHEL-73606] - iommu/dma: Factor out a iommu_dma_map_swiotlb helper (Eder Zulian) [RHEL-73606] - dma-mapping: Provide an interface to allow allocate IOVA (Eder Zulian) [RHEL-73606] - iommu: add kernel-doc for iommu_unmap_fast (Eder Zulian) [RHEL-73606] - iommu: generalize the batched sync after map interface (Eder Zulian) [RHEL-73606] - dma-mapping: move the PCI P2PDMA mapping helpers to pci-p2pdma.h (Eder Zulian) [RHEL-73606] - PCI/P2PDMA: Refactor the p2pdma mapping helpers (Eder Zulian) [RHEL-73606] - s390/ism: fix concurrency management in ism_cmd() (Mete Durlu) [RHEL-110207] - redhat/configs: Enable CONFIG_X86_BUS_LOCK_DETECT (John Allen) [RHEL-50321] - x86/bus_lock: Add support for AMD (John Allen) [RHEL-50321] - x86/split_lock: Move Split and Bus lock code to a dedicated file (John Allen) [RHEL-50321] Resolves: RHEL-101301, RHEL-103121, RHEL-104973, RHEL-105091, RHEL-106911, RHEL-110207, RHEL-110839, RHEL-111203, RHEL-50321, RHEL-73606 Signed-off-by: Scott Weaver <scweaver@redhat.com>
2025-09-09 14:56:13 -04:00 · 2025-09-09 14:56:13 -04:00 · fafb76e791
commit fafb76e791
parent 57bca26e8c
23 changed files with 216 additions and 12 deletions
--- a/Makefile.rhelver
+++ b/Makefile.rhelver
@ -12,7 +12,7 @@ RHEL_MINOR = 2
 #
 # Use this spot to avoid future merge conflicts.
 # Do not trim this comment.
-RHEL_RELEASE = 126
+RHEL_RELEASE = 127

 #
 # RHEL_REBASE_NUM
--- a/kernel-aarch64-64k-debug-rhel.config
+++ b/kernel-aarch64-64k-debug-rhel.config
@ -8414,6 +8414,9 @@ CONFIG_ZBUD=y
 # CONFIG_ZEROPLUS_FF is not set
 # CONFIG_ZIIRAVE_WATCHDOG is not set
 CONFIG_ZISOFS=y
+CONFIG_ZL3073X_I2C=m
+CONFIG_ZL3073X=m
+CONFIG_ZL3073X_SPI=m
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_DFLTCC=y
 CONFIG_ZLIB_INFLATE=y
--- a/kernel-aarch64-64k-rhel.config
+++ b/kernel-aarch64-64k-rhel.config
@ -8389,6 +8389,9 @@ CONFIG_ZBUD=y
 # CONFIG_ZEROPLUS_FF is not set
 # CONFIG_ZIIRAVE_WATCHDOG is not set
 CONFIG_ZISOFS=y
+CONFIG_ZL3073X_I2C=m
+CONFIG_ZL3073X=m
+CONFIG_ZL3073X_SPI=m
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_DFLTCC=y
 CONFIG_ZLIB_INFLATE=y
--- a/kernel-aarch64-debug-rhel.config
+++ b/kernel-aarch64-debug-rhel.config
@ -8410,6 +8410,9 @@ CONFIG_ZBUD=y
 # CONFIG_ZEROPLUS_FF is not set
 # CONFIG_ZIIRAVE_WATCHDOG is not set
 CONFIG_ZISOFS=y
+CONFIG_ZL3073X_I2C=m
+CONFIG_ZL3073X=m
+CONFIG_ZL3073X_SPI=m
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_DFLTCC=y
 CONFIG_ZLIB_INFLATE=y
--- a/kernel-aarch64-rhel.config
+++ b/kernel-aarch64-rhel.config
@ -8385,6 +8385,9 @@ CONFIG_ZBUD=y
 # CONFIG_ZEROPLUS_FF is not set
 # CONFIG_ZIIRAVE_WATCHDOG is not set
 CONFIG_ZISOFS=y
+CONFIG_ZL3073X_I2C=m
+CONFIG_ZL3073X=m
+CONFIG_ZL3073X_SPI=m
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_DFLTCC=y
 CONFIG_ZLIB_INFLATE=y
--- a/kernel-aarch64-rt-64k-debug-rhel.config
+++ b/kernel-aarch64-rt-64k-debug-rhel.config
@ -8469,6 +8469,9 @@ CONFIG_ZBUD=y
 # CONFIG_ZEROPLUS_FF is not set
 # CONFIG_ZIIRAVE_WATCHDOG is not set
 CONFIG_ZISOFS=y
+CONFIG_ZL3073X_I2C=m
+CONFIG_ZL3073X=m
+CONFIG_ZL3073X_SPI=m
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_DFLTCC=y
 CONFIG_ZLIB_INFLATE=y
--- a/kernel-aarch64-rt-64k-rhel.config
+++ b/kernel-aarch64-rt-64k-rhel.config
@ -8444,6 +8444,9 @@ CONFIG_ZBUD=y
 # CONFIG_ZEROPLUS_FF is not set
 # CONFIG_ZIIRAVE_WATCHDOG is not set
 CONFIG_ZISOFS=y
+CONFIG_ZL3073X_I2C=m
+CONFIG_ZL3073X=m
+CONFIG_ZL3073X_SPI=m
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_DFLTCC=y
 CONFIG_ZLIB_INFLATE=y
--- a/kernel-aarch64-rt-debug-rhel.config
+++ b/kernel-aarch64-rt-debug-rhel.config
@ -8465,6 +8465,9 @@ CONFIG_ZBUD=y
 # CONFIG_ZEROPLUS_FF is not set
 # CONFIG_ZIIRAVE_WATCHDOG is not set
 CONFIG_ZISOFS=y
+CONFIG_ZL3073X_I2C=m
+CONFIG_ZL3073X=m
+CONFIG_ZL3073X_SPI=m
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_DFLTCC=y
 CONFIG_ZLIB_INFLATE=y
--- a/kernel-aarch64-rt-rhel.config
+++ b/kernel-aarch64-rt-rhel.config
@ -8440,6 +8440,9 @@ CONFIG_ZBUD=y
 # CONFIG_ZEROPLUS_FF is not set
 # CONFIG_ZIIRAVE_WATCHDOG is not set
 CONFIG_ZISOFS=y
+CONFIG_ZL3073X_I2C=m
+CONFIG_ZL3073X=m
+CONFIG_ZL3073X_SPI=m
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_DFLTCC=y
 CONFIG_ZLIB_INFLATE=y
--- a/kernel-ppc64le-debug-rhel.config
+++ b/kernel-ppc64le-debug-rhel.config
@ -7840,6 +7840,9 @@ CONFIG_ZBUD=y
 # CONFIG_ZEROPLUS_FF is not set
 # CONFIG_ZIIRAVE_WATCHDOG is not set
 CONFIG_ZISOFS=y
+CONFIG_ZL3073X_I2C=m
+CONFIG_ZL3073X=m
+CONFIG_ZL3073X_SPI=m
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_DFLTCC=y
 CONFIG_ZLIB_INFLATE=y
--- a/kernel-ppc64le-rhel.config
+++ b/kernel-ppc64le-rhel.config
@ -7817,6 +7817,9 @@ CONFIG_ZBUD=y
 # CONFIG_ZEROPLUS_FF is not set
 # CONFIG_ZIIRAVE_WATCHDOG is not set
 CONFIG_ZISOFS=y
+CONFIG_ZL3073X_I2C=m
+CONFIG_ZL3073X=m
+CONFIG_ZL3073X_SPI=m
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_DFLTCC=y
 CONFIG_ZLIB_INFLATE=y
--- a/kernel-riscv64-debug-rhel.config
+++ b/kernel-riscv64-debug-rhel.config
@ -7744,6 +7744,9 @@ CONFIG_ZBUD=y
 # CONFIG_ZEROPLUS_FF is not set
 # CONFIG_ZIIRAVE_WATCHDOG is not set
 CONFIG_ZISOFS=y
+CONFIG_ZL3073X_I2C=m
+CONFIG_ZL3073X=m
+CONFIG_ZL3073X_SPI=m
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_DFLTCC=y
 CONFIG_ZLIB_INFLATE=y
--- a/kernel-riscv64-rhel.config
+++ b/kernel-riscv64-rhel.config
@ -7721,6 +7721,9 @@ CONFIG_ZBUD=y
 # CONFIG_ZEROPLUS_FF is not set
 # CONFIG_ZIIRAVE_WATCHDOG is not set
 CONFIG_ZISOFS=y
+CONFIG_ZL3073X_I2C=m
+CONFIG_ZL3073X=m
+CONFIG_ZL3073X_SPI=m
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_DFLTCC=y
 CONFIG_ZLIB_INFLATE=y
--- a/kernel-s390x-debug-rhel.config
+++ b/kernel-s390x-debug-rhel.config
@ -7822,6 +7822,9 @@ CONFIG_ZCRYPT_MULTIDEVNODES=y
 CONFIG_ZFCP=m
 # CONFIG_ZIIRAVE_WATCHDOG is not set
 CONFIG_ZISOFS=y
+# CONFIG_ZL3073X_I2C is not set
+# CONFIG_ZL3073X is not set
+# CONFIG_ZL3073X_SPI is not set
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_DFLTCC=y
 CONFIG_ZLIB_INFLATE=y
--- a/kernel-s390x-rhel.config
+++ b/kernel-s390x-rhel.config
@ -7799,6 +7799,9 @@ CONFIG_ZCRYPT_MULTIDEVNODES=y
 CONFIG_ZFCP=m
 # CONFIG_ZIIRAVE_WATCHDOG is not set
 CONFIG_ZISOFS=y
+# CONFIG_ZL3073X_I2C is not set
+# CONFIG_ZL3073X is not set
+# CONFIG_ZL3073X_SPI is not set
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_DFLTCC=y
 CONFIG_ZLIB_INFLATE=y
--- a/kernel-s390x-zfcpdump-rhel.config
+++ b/kernel-s390x-zfcpdump-rhel.config
@ -7821,6 +7821,9 @@ CONFIG_ZCRYPT_MULTIDEVNODES=y
 CONFIG_ZFCP=y
 # CONFIG_ZIIRAVE_WATCHDOG is not set
 CONFIG_ZISOFS=y
+# CONFIG_ZL3073X_I2C is not set
+# CONFIG_ZL3073X is not set
+# CONFIG_ZL3073X_SPI is not set
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_DFLTCC=y
 CONFIG_ZLIB_INFLATE=y
--- a/kernel-x86_64-debug-rhel.config
+++ b/kernel-x86_64-debug-rhel.config
@ -2588,7 +2588,7 @@ CONFIG_I2C_MUX=m
 CONFIG_I2C_MUX_MLXCPLD=m
 # CONFIG_I2C_MUX_MULE is not set
 # CONFIG_I2C_MUX_PCA9541 is not set
-# CONFIG_I2C_MUX_PCA954x is not set
+CONFIG_I2C_MUX_PCA954x=m
 # CONFIG_I2C_MUX_REG is not set
 CONFIG_I2C_NFORCE2=m
 CONFIG_I2C_NFORCE2_S4985=m
@ -8172,6 +8172,7 @@ CONFIG_X86_AMD_PSTATE_DEFAULT_MODE=3
 CONFIG_X86_AMD_PSTATE_UT=m
 CONFIG_X86_AMD_PSTATE=y
 CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
+CONFIG_X86_BUS_LOCK_DETECT=y
 CONFIG_X86_CHECK_BIOS_CORRUPTION=y
 CONFIG_X86_CMPXCHG64=y
 CONFIG_X86_CPA_STATISTICS=y
@ -8315,6 +8316,9 @@ CONFIG_ZBUD=y
 # CONFIG_ZEROPLUS_FF is not set
 # CONFIG_ZIIRAVE_WATCHDOG is not set
 CONFIG_ZISOFS=y
+CONFIG_ZL3073X_I2C=m
+CONFIG_ZL3073X=m
+CONFIG_ZL3073X_SPI=m
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_DFLTCC=y
 CONFIG_ZLIB_INFLATE=y
--- a/kernel-x86_64-rhel.config
+++ b/kernel-x86_64-rhel.config
@ -2572,7 +2572,7 @@ CONFIG_I2C_MUX=m
 CONFIG_I2C_MUX_MLXCPLD=m
 # CONFIG_I2C_MUX_MULE is not set
 # CONFIG_I2C_MUX_PCA9541 is not set
-# CONFIG_I2C_MUX_PCA954x is not set
+CONFIG_I2C_MUX_PCA954x=m
 # CONFIG_I2C_MUX_REG is not set
 CONFIG_I2C_NFORCE2=m
 CONFIG_I2C_NFORCE2_S4985=m
@ -8148,6 +8148,7 @@ CONFIG_X86_AMD_PSTATE_DEFAULT_MODE=3
 CONFIG_X86_AMD_PSTATE_UT=m
 CONFIG_X86_AMD_PSTATE=y
 # CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
+CONFIG_X86_BUS_LOCK_DETECT=y
 CONFIG_X86_CHECK_BIOS_CORRUPTION=y
 CONFIG_X86_CMPXCHG64=y
 CONFIG_X86_CPA_STATISTICS=y
@ -8291,6 +8292,9 @@ CONFIG_ZBUD=y
 # CONFIG_ZEROPLUS_FF is not set
 # CONFIG_ZIIRAVE_WATCHDOG is not set
 CONFIG_ZISOFS=y
+CONFIG_ZL3073X_I2C=m
+CONFIG_ZL3073X=m
+CONFIG_ZL3073X_SPI=m
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_DFLTCC=y
 CONFIG_ZLIB_INFLATE=y
--- a/kernel-x86_64-rt-debug-rhel.config
+++ b/kernel-x86_64-rt-debug-rhel.config
@ -2629,7 +2629,7 @@ CONFIG_I2C_MUX=m
 CONFIG_I2C_MUX_MLXCPLD=m
 # CONFIG_I2C_MUX_MULE is not set
 # CONFIG_I2C_MUX_PCA9541 is not set
-# CONFIG_I2C_MUX_PCA954x is not set
+CONFIG_I2C_MUX_PCA954x=m
 # CONFIG_I2C_MUX_REG is not set
 CONFIG_I2C_NFORCE2=m
 CONFIG_I2C_NFORCE2_S4985=m
@ -8222,6 +8222,7 @@ CONFIG_X86_AMD_PSTATE_DEFAULT_MODE=3
 CONFIG_X86_AMD_PSTATE_UT=m
 CONFIG_X86_AMD_PSTATE=y
 CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
+CONFIG_X86_BUS_LOCK_DETECT=y
 CONFIG_X86_CHECK_BIOS_CORRUPTION=y
 CONFIG_X86_CMPXCHG64=y
 CONFIG_X86_CPA_STATISTICS=y
@ -8371,6 +8372,9 @@ CONFIG_ZBUD=y
 # CONFIG_ZEROPLUS_FF is not set
 # CONFIG_ZIIRAVE_WATCHDOG is not set
 CONFIG_ZISOFS=y
+CONFIG_ZL3073X_I2C=m
+CONFIG_ZL3073X=m
+CONFIG_ZL3073X_SPI=m
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_DFLTCC=y
 CONFIG_ZLIB_INFLATE=y
--- a/kernel-x86_64-rt-rhel.config
+++ b/kernel-x86_64-rt-rhel.config
@ -2613,7 +2613,7 @@ CONFIG_I2C_MUX=m
 CONFIG_I2C_MUX_MLXCPLD=m
 # CONFIG_I2C_MUX_MULE is not set
 # CONFIG_I2C_MUX_PCA9541 is not set
-# CONFIG_I2C_MUX_PCA954x is not set
+CONFIG_I2C_MUX_PCA954x=m
 # CONFIG_I2C_MUX_REG is not set
 CONFIG_I2C_NFORCE2=m
 CONFIG_I2C_NFORCE2_S4985=m
@ -8198,6 +8198,7 @@ CONFIG_X86_AMD_PSTATE_DEFAULT_MODE=3
 CONFIG_X86_AMD_PSTATE_UT=m
 CONFIG_X86_AMD_PSTATE=y
 # CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
+CONFIG_X86_BUS_LOCK_DETECT=y
 CONFIG_X86_CHECK_BIOS_CORRUPTION=y
 CONFIG_X86_CMPXCHG64=y
 CONFIG_X86_CPA_STATISTICS=y
@ -8347,6 +8348,9 @@ CONFIG_ZBUD=y
 # CONFIG_ZEROPLUS_FF is not set
 # CONFIG_ZIIRAVE_WATCHDOG is not set
 CONFIG_ZISOFS=y
+CONFIG_ZL3073X_I2C=m
+CONFIG_ZL3073X=m
+CONFIG_ZL3073X_SPI=m
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_DFLTCC=y
 CONFIG_ZLIB_INFLATE=y
--- a/kernel.changelog
+++ b/kernel.changelog
@ -1,3 +1,75 @@
+* Tue Sep 09 2025 Scott Weaver <scweaver@redhat.com> [6.12.0-127.el10]
+- s390/hypfs: Enable limited access during lockdown (Mete Durlu) [RHEL-111203]
+- s390/hypfs: Avoid unnecessary ioctl registration in debugfs (Mete Durlu) [RHEL-111203]
+- hwmon: Add static visibility member to struct hwmon_ops (CKI Backport Bot) [RHEL-105091]
+- dpll: zl3073x: ZL3073X_I2C and ZL3073X_SPI should depend on NET (Ivan Vecera) [RHEL-104973]
+- dpll: Make ZL3073X invisible (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Fix build failure (Ivan Vecera) [RHEL-104973]
+- redhat/configs: enable CONFIG_ZL3073X* (Ivan Vecera) [RHEL-104973]
+- redhat/configs: enable CONFIG_I2C_MUX_PCA954x on x86 (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Add support to get fractional frequency offset (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Add support to adjust phase (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Implement phase offset monitor feature (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Add support to get phase offset on connected input pin (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Add support to get/set esync on pins (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Add support to get/set frequency on pins (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Implement input pin state setting in automatic mode (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Add support to get/set priority on input pins (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Implement input pin selection in manual mode (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Register DPLL devices and pins (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Read DPLL types and pin properties from system firmware (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Fetch invariants during probe (Ivan Vecera) [RHEL-104973]
+- dpll: Add basic Microchip ZL3073x support (Ivan Vecera) [RHEL-104973]
+- dt-bindings: dpll: Add support for Microchip Azurite chip family (Ivan Vecera) [RHEL-104973]
+- dt-bindings: dpll: Add DPLL device and pin (Ivan Vecera) [RHEL-104973]
+- x86/CPU/AMD: Ignore invalid reset reason value (Steve Best) [RHEL-101301]
+- x86/CPU/AMD: Add X86_FEATURE_ZEN6 (Steve Best) [RHEL-106911]
+- x86/cpufeatures: Free up unused feature bits (Steve Best) [RHEL-106911]
+- intel_idle: Allow loading ACPI tables for any family (Steve Best) [RHEL-110839]
+- intel_idle: Update arguments of mwait_idle_with_hints() (Steve Best) [RHEL-110839]
+- intel_idle: Rescan "dead" SMT siblings during initialization (Steve Best) [RHEL-110839]
+- x86/smp: PM/hibernate: Split arch_resume_nosmt() (Steve Best) [RHEL-110839]
+- intel_idle: Use subsys_initcall_sync() for initialization (Steve Best) [RHEL-110839]
+- intel_idle: Add C1 demotion on/off sysfs knob (Steve Best) [RHEL-110839]
+- Move FCH header to a location accessible by all archs (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Add PCSpecialist Lafite Pro V 14M to 8042 quirks list (Steve Best) [RHEL-103121]
+- platform/x86/amd: pmc: Clear metrics table at start of cycle (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Declare quirk_spurious_8042 for MECHREVO Wujie 14XA (GX4HRXL) (Steve Best) [RHEL-103121]
+- platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles (Steve Best) [RHEL-103121]
+- x86/platform/amd: Move the <asm/amd_nb.h> header to <asm/amd/nb.h> (Steve Best) [RHEL-103121]
+- x86/mce/amd: Remove shared threshold bank plumbing (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: fix leak in probe() (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Use managed APIs for mutex (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Remove unnecessary line breaks (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Move macros and structures to the PMC header file (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Notify user when platform does not support s0ix transition (Steve Best) [RHEL-103121]
+- platform/x86: amd: Use *-y instead of *-objs in Makefiles [partial] (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Only disable IRQ1 wakeup where i8042 actually enabled it (Steve Best) [RHEL-103121]
+- platform/x86/amd: pmc: Use guard(mutex) (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Add STB support for AMD Desktop variants (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Update S2D message id for 1Ah Family 70h model (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Update IP information structure for newer SoCs (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Use ARRAY_SIZE() to fill num_ips information (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Isolate STB code changes to a new file (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Define enum for S2D/PMC msg_port and add helper function (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Update function names to align with new STB file (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Move STB functionality to a new file for better code organization (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Move STB block into amd_pmc_s2d_init() (Steve Best) [RHEL-103121]
+- docs: core-api: document the IOVA-based API (Eder Zulian) [RHEL-73606]
+- dma-mapping: add a dma_need_unmap helper (Eder Zulian) [RHEL-73606]
+- dma-mapping: Implement link/unlink ranges API (Eder Zulian) [RHEL-73606]
+- iommu/dma: Factor out a iommu_dma_map_swiotlb helper (Eder Zulian) [RHEL-73606]
+- dma-mapping: Provide an interface to allow allocate IOVA (Eder Zulian) [RHEL-73606]
+- iommu: add kernel-doc for iommu_unmap_fast (Eder Zulian) [RHEL-73606]
+- iommu: generalize the batched sync after map interface (Eder Zulian) [RHEL-73606]
+- dma-mapping: move the PCI P2PDMA mapping helpers to pci-p2pdma.h (Eder Zulian) [RHEL-73606]
+- PCI/P2PDMA: Refactor the p2pdma mapping helpers (Eder Zulian) [RHEL-73606]
+- s390/ism: fix concurrency management in ism_cmd() (Mete Durlu) [RHEL-110207]
+- redhat/configs: Enable CONFIG_X86_BUS_LOCK_DETECT (John Allen) [RHEL-50321]
+- x86/bus_lock: Add support for AMD (John Allen) [RHEL-50321]
+- x86/split_lock: Move Split and Bus lock code to a dedicated file (John Allen) [RHEL-50321]
+Resolves: RHEL-101301, RHEL-103121, RHEL-104973, RHEL-105091, RHEL-106911, RHEL-110207, RHEL-110839, RHEL-111203, RHEL-50321, RHEL-73606
+
 * Wed Sep 03 2025 Scott Weaver <scweaver@redhat.com> [6.12.0-126.el10]
 - platform/x86/amd: pmf: Simplify error flow in amd_pmf_init_smart_pc() (Steve Best) [RHEL-104142]
 - platform/x86/amd: pmf: Prevent amd_pmf_tee_deinit() from running twice (Steve Best) [RHEL-104142]
--- a/kernel.spec
+++ b/kernel.spec
@ -165,15 +165,15 @@ Summary: The Linux kernel
 %define specrpmversion 6.12.0
 %define specversion 6.12.0
 %define patchversion 6.12
-%define pkgrelease 126
+%define pkgrelease 127
 %define kversion 6
-%define tarfile_release 6.12.0-126.el10
+%define tarfile_release 6.12.0-127.el10
 # This is needed to do merge window version magic
 %define patchlevel 12
 # This allows pkg_release to have configurable %%{?dist} tag
-%define specrelease 126%{?buildid}%{?dist}
+%define specrelease 127%{?buildid}%{?dist}
 # This defines the kabi tarball version
-%define kabiversion 6.12.0-126.el10
+%define kabiversion 6.12.0-127.el10

 # If this variable is set to 1, a bpf selftests build failure will cause a
 # fatal kernel package build error
@ -4339,6 +4339,77 @@ fi\
 #
 #
 %changelog
+* Tue Sep 09 2025 Scott Weaver <scweaver@redhat.com> [6.12.0-127.el10]
+- s390/hypfs: Enable limited access during lockdown (Mete Durlu) [RHEL-111203]
+- s390/hypfs: Avoid unnecessary ioctl registration in debugfs (Mete Durlu) [RHEL-111203]
+- hwmon: Add static visibility member to struct hwmon_ops (CKI Backport Bot) [RHEL-105091]
+- dpll: zl3073x: ZL3073X_I2C and ZL3073X_SPI should depend on NET (Ivan Vecera) [RHEL-104973]
+- dpll: Make ZL3073X invisible (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Fix build failure (Ivan Vecera) [RHEL-104973]
+- redhat/configs: enable CONFIG_ZL3073X* (Ivan Vecera) [RHEL-104973]
+- redhat/configs: enable CONFIG_I2C_MUX_PCA954x on x86 (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Add support to get fractional frequency offset (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Add support to adjust phase (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Implement phase offset monitor feature (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Add support to get phase offset on connected input pin (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Add support to get/set esync on pins (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Add support to get/set frequency on pins (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Implement input pin state setting in automatic mode (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Add support to get/set priority on input pins (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Implement input pin selection in manual mode (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Register DPLL devices and pins (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Read DPLL types and pin properties from system firmware (Ivan Vecera) [RHEL-104973]
+- dpll: zl3073x: Fetch invariants during probe (Ivan Vecera) [RHEL-104973]
+- dpll: Add basic Microchip ZL3073x support (Ivan Vecera) [RHEL-104973]
+- dt-bindings: dpll: Add support for Microchip Azurite chip family (Ivan Vecera) [RHEL-104973]
+- dt-bindings: dpll: Add DPLL device and pin (Ivan Vecera) [RHEL-104973]
+- x86/CPU/AMD: Ignore invalid reset reason value (Steve Best) [RHEL-101301]
+- x86/CPU/AMD: Add X86_FEATURE_ZEN6 (Steve Best) [RHEL-106911]
+- x86/cpufeatures: Free up unused feature bits (Steve Best) [RHEL-106911]
+- intel_idle: Allow loading ACPI tables for any family (Steve Best) [RHEL-110839]
+- intel_idle: Update arguments of mwait_idle_with_hints() (Steve Best) [RHEL-110839]
+- intel_idle: Rescan "dead" SMT siblings during initialization (Steve Best) [RHEL-110839]
+- x86/smp: PM/hibernate: Split arch_resume_nosmt() (Steve Best) [RHEL-110839]
+- intel_idle: Use subsys_initcall_sync() for initialization (Steve Best) [RHEL-110839]
+- intel_idle: Add C1 demotion on/off sysfs knob (Steve Best) [RHEL-110839]
+- Move FCH header to a location accessible by all archs (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Add PCSpecialist Lafite Pro V 14M to 8042 quirks list (Steve Best) [RHEL-103121]
+- platform/x86/amd: pmc: Clear metrics table at start of cycle (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Declare quirk_spurious_8042 for MECHREVO Wujie 14XA (GX4HRXL) (Steve Best) [RHEL-103121]
+- platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles (Steve Best) [RHEL-103121]
+- x86/platform/amd: Move the <asm/amd_nb.h> header to <asm/amd/nb.h> (Steve Best) [RHEL-103121]
+- x86/mce/amd: Remove shared threshold bank plumbing (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: fix leak in probe() (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Use managed APIs for mutex (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Remove unnecessary line breaks (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Move macros and structures to the PMC header file (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Notify user when platform does not support s0ix transition (Steve Best) [RHEL-103121]
+- platform/x86: amd: Use *-y instead of *-objs in Makefiles [partial] (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Only disable IRQ1 wakeup where i8042 actually enabled it (Steve Best) [RHEL-103121]
+- platform/x86/amd: pmc: Use guard(mutex) (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Add STB support for AMD Desktop variants (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Update S2D message id for 1Ah Family 70h model (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Update IP information structure for newer SoCs (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Use ARRAY_SIZE() to fill num_ips information (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Isolate STB code changes to a new file (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Define enum for S2D/PMC msg_port and add helper function (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Update function names to align with new STB file (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Move STB functionality to a new file for better code organization (Steve Best) [RHEL-103121]
+- platform/x86/amd/pmc: Move STB block into amd_pmc_s2d_init() (Steve Best) [RHEL-103121]
+- docs: core-api: document the IOVA-based API (Eder Zulian) [RHEL-73606]
+- dma-mapping: add a dma_need_unmap helper (Eder Zulian) [RHEL-73606]
+- dma-mapping: Implement link/unlink ranges API (Eder Zulian) [RHEL-73606]
+- iommu/dma: Factor out a iommu_dma_map_swiotlb helper (Eder Zulian) [RHEL-73606]
+- dma-mapping: Provide an interface to allow allocate IOVA (Eder Zulian) [RHEL-73606]
+- iommu: add kernel-doc for iommu_unmap_fast (Eder Zulian) [RHEL-73606]
+- iommu: generalize the batched sync after map interface (Eder Zulian) [RHEL-73606]
+- dma-mapping: move the PCI P2PDMA mapping helpers to pci-p2pdma.h (Eder Zulian) [RHEL-73606]
+- PCI/P2PDMA: Refactor the p2pdma mapping helpers (Eder Zulian) [RHEL-73606]
+- s390/ism: fix concurrency management in ism_cmd() (Mete Durlu) [RHEL-110207]
+- redhat/configs: Enable CONFIG_X86_BUS_LOCK_DETECT (John Allen) [RHEL-50321]
+- x86/bus_lock: Add support for AMD (John Allen) [RHEL-50321]
+- x86/split_lock: Move Split and Bus lock code to a dedicated file (John Allen) [RHEL-50321]
+
 * Wed Sep 03 2025 Scott Weaver <scweaver@redhat.com> [6.12.0-126.el10]
 - platform/x86/amd: pmf: Simplify error flow in amd_pmf_init_smart_pc() (Steve Best) [RHEL-104142]
 - platform/x86/amd: pmf: Prevent amd_pmf_tee_deinit() from running twice (Steve Best) [RHEL-104142]
--- a/6
+++ b/6
@ -1,5 +1,5 @@
 SHA512 (kernel-abi-stablelists-6.6.0.tar.bz2) = 4f917598056dee5e23814621ec96ff2e4a411c8c4ba9d56ecb01b23cb96431825bedbecfcbaac9338efbf5cb21694d85497fa0bf43e7c80d9cd10bc6dd144dbd
 SHA512 (kernel-kabi-dw-6.6.0.tar.bz2) = 19308cd976031d05e18ef7f5d093218acdb89446418bab0cd956ff12cf66369915b9e64bb66fa9f20939428a60e81884fec5be3529c6c7461738d6540d3cc5c6
-SHA512 (linux-6.12.0-126.el10.tar.xz) = 5df1ff6304fe931c7c3133d2551ad610d2f4b5906e8b0d52f3623ba32920957ad48b4585684591cbf65304dd02e98ea1410598ef10ce589a62abe734d7742a57
-SHA512 (kernel-abi-stablelists-6.12.0-126.el10.tar.xz) = c05c8948a1697d3ca683766b81747cc8bbc6b6af78417941313d6fdcffcd710d8edf42db37e3a3ae98f29955d8fb3e4a7c0b1e60f8e3130a5c59b72991bb713c
-SHA512 (kernel-kabi-dw-6.12.0-126.el10.tar.xz) = 365d1b5d703fe6a1ca5575377ff8dbefd07098e213895ef81b0ee776f0adc98bed9318a17cdc59d062bdefcf7cec8e865cc61b2347cee121aad042c7a139d83a
+SHA512 (linux-6.12.0-127.el10.tar.xz) = a8d39eebba8117d927946727840a22fd117b5f44081667dedb3659e4100ff28f37fcd3f74e7b01cc78430c37d29521dbb4aecc4296d1b5af07d612663017275f
+SHA512 (kernel-abi-stablelists-6.12.0-127.el10.tar.xz) = 3cfd037902174845841ef1f6f93ea50ab5ab3d4a5a1719fe1da4cc1a4d1d02fa44fe85cea170a0e3447c4f7d547ca949fff9e801f984f687b7573222b105255d
+SHA512 (kernel-kabi-dw-6.12.0-127.el10.tar.xz) = 365d1b5d703fe6a1ca5575377ff8dbefd07098e213895ef81b0ee776f0adc98bed9318a17cdc59d062bdefcf7cec8e865cc61b2347cee121aad042c7a139d83a