e4a5efaad5
* Wed Oct 04 2023 Scott Weaver <scweaver@redhat.com> [5.14.0-373.el9] - CI: Enable 'dist-self-test' for C9S/RHEL9 (Vitaly Kuznetsov) - redhat: Update 'dist-self-test-data' (Vitaly Kuznetsov) - redhat: Explicitly disable CONFIG_COPS (Vitaly Kuznetsov) - redhat: Add dist-check-licenses target (Vitaly Kuznetsov) - redhat: Introduce "Verify SPDX-License-Identifier tags" selftest (Vitaly Kuznetsov) - redhat: Use kspdx-tool output for the License: field (Vitaly Kuznetsov) - cpuidle, intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE *again* (David Arcari) [RHEL-11351] - Revert "intel_idle: Add support for using intel_idle in a VM guest using just hlt" (David Arcari) [RHEL-11351] - Revert "intel_idle: Add a "Long HLT" C1 state for the VM guest mode" (David Arcari) [RHEL-11351] - Revert "intel_idle: Add __init annotation to matchup_vm_state_with_baremetal()" (David Arcari) [RHEL-11351] - intel_idle: Add __init annotation to matchup_vm_state_with_baremetal() (David Arcari) [RHEL-11351] - intel_idle: Add a "Long HLT" C1 state for the VM guest mode (David Arcari) [RHEL-11351] - intel_idle: Add support for using intel_idle in a VM guest using just hlt (David Arcari) [RHEL-11351] - intel_idle: clean up the (new) state_update_enter_method function (David Arcari) [RHEL-11351] - intel_idle: refactor state->enter manipulation into its own function (David Arcari) [RHEL-11351] - intel_idle: mark few variables as __read_mostly (David Arcari) [RHEL-11351] - intel_idle: do not sprinkle module parameter definitions around (David Arcari) [RHEL-11351] - intel_idle: fix confusing message (David Arcari) [RHEL-11351] - intel_idle: improve C-state flags handling robustness (David Arcari) [RHEL-11351] - intel_idle: further intel_idle_init_cstates_icpu() cleanup (David Arcari) [RHEL-11351] - intel_idle: clean up intel_idle_init_cstates_icpu() (David Arcari) [RHEL-11351] - intel_idle: use pr_info() instead of printk() (David Arcari) [RHEL-11351] - PCI: Free released resource after coalescing (Myron Stowe) [RHEL-2570] - dt-bindings: PCI: qcom: Fix SDX65 compatible (Myron Stowe) [RHEL-2570] - PCI: rockchip: Use 64-bit mask on MSI 64-bit PCI address (Myron Stowe) [RHEL-2570] - PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus (Myron Stowe) [RHEL-2570] - Revert "PCI: mvebu: Mark driver as BROKEN" (Myron Stowe) [RHEL-2570] - MAINTAINERS: Add Manivannan Sadhasivam as DesignWare PCIe driver maintainer (Myron Stowe) [RHEL-2570] - PCI: xgene-msi: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: tegra: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: rockchip-host: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: mvebu: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: mt7621: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: mediatek-gen3: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: mediatek: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: iproc: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: hisi-error: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: dwc: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: j721e: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: brcmstb: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: altera-msi: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: altera: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: aardvark: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: layerscape: Add the endpoint linkup notifier support (Myron Stowe) [RHEL-2570] - PCI: endpoint: pci-epf-vntb: Fix typo in comments (Myron Stowe) [RHEL-2570] - MAINTAINERS: Add PCI MHI endpoint function driver under MHI bus (Myron Stowe) [RHEL-2570] - PCI: endpoint: Add PCI Endpoint function driver for MHI bus (Myron Stowe) [RHEL-2570] - PCI: qcom-ep: Add support for BME notification (Myron Stowe) [RHEL-2570] - PCI: qcom-ep: Add support for Link down notification (Myron Stowe) [RHEL-2570] - PCI: endpoint: Add BME notifier support (Myron Stowe) [RHEL-2570] - PCI: endpoint: Add linkdown notifier support (Myron Stowe) [RHEL-2570] - PCI: endpoint: Return error if EPC is started/stopped multiple times (Myron Stowe) [RHEL-2570] - PCI: endpoint: Pass EPF device ID to the probe function (Myron Stowe) [RHEL-2570] - PCI: endpoint: Add missing documentation about the MSI/MSI-X range (Myron Stowe) [RHEL-2570] - PCI: endpoint: Improve pci_epf_type_add_cfs() (Myron Stowe) [RHEL-2570] - PCI: endpoint: functions/pci-epf-test: Fix dma_chan direction (Myron Stowe) [RHEL-2570] - misc: pci_endpoint_test: Simplify pci_endpoint_test_msi_irq() (Myron Stowe) [RHEL-2570] - misc: pci_endpoint_test: Do not write status in IRQ handler (Myron Stowe) [RHEL-2570] - misc: pci_endpoint_test: Re-init completion for every test (Myron Stowe) [RHEL-2570] - misc: pci_endpoint_test: Free IRQs before removing the device (Myron Stowe) [RHEL-2570] - PCI: epf-test: Simplify transfers result print (Myron Stowe) [RHEL-2570] - PCI: epf-test: Simplify DMA support checks (Myron Stowe) [RHEL-2570] - PCI: epf-test: Cleanup request result handling (Myron Stowe) [RHEL-2570] - PCI: epf-test: Cleanup pci_epf_test_cmd_handler() (Myron Stowe) [RHEL-2570] - PCI: epf-test: Improve handling of command and status registers (Myron Stowe) [RHEL-2570] - PCI: epf-test: Simplify IRQ test commands execution (Myron Stowe) [RHEL-2570] - PCI: epf-test: Simplify pci_epf_test_raise_irq() (Myron Stowe) [RHEL-2570] - PCI: epf-test: Simplify read/write/copy test functions (Myron Stowe) [RHEL-2570] - PCI: epf-test: Use dmaengine_submit() to initiate DMA transfer (Myron Stowe) [RHEL-2570] - PCI: epf-test: Fix DMA transfer completion detection (Myron Stowe) [RHEL-2570] - PCI: epf-test: Fix DMA transfer completion initialization (Myron Stowe) [RHEL-2570] - PCI: endpoint: Move pci_epf_type_add_cfs() code (Myron Stowe) [RHEL-2570] - PCI: endpoint: Automatically create a function specific attributes group (Myron Stowe) [RHEL-2570] - PCI: endpoint: Fix a Kconfig prompt of vNTB driver (Myron Stowe) [RHEL-2570] - PCI: endpoint: Fix Kconfig indent style (Myron Stowe) [RHEL-2570] - PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain() (Myron Stowe) [RHEL-2570] - PCI: vmd: Reset VMD config register between soft reboots (Myron Stowe) [RHEL-2570] - PCI: rockchip: Set address alignment for endpoint mode (Myron Stowe) [RHEL-2570] - PCI: rockchip: Don't advertise MSI-X in PCIe capabilities (Myron Stowe) [RHEL-2570] - PCI: rockchip: Use u32 variable to access 32-bit registers (Myron Stowe) [RHEL-2570] - PCI: rockchip: Fix window mapping and address translation for endpoint (Myron Stowe) [RHEL-2570] - PCI: rockchip: Fix legacy IRQ generation for RK3399 PCIe endpoint core (Myron Stowe) [RHEL-2570] - dt-bindings: PCI: Update the RK3399 example to a valid one (Myron Stowe) [RHEL-2570] - dt-bindings: PCI: Convert Rockchip RK3399 PCIe to DT schema (Myron Stowe) [RHEL-2570] - PCI: rockchip: Add poll and timeout to wait for PHY PLLs to be locked (Myron Stowe) [RHEL-2570] - PCI: rockchip: Assert PCI Configuration Enable bit after probe (Myron Stowe) [RHEL-2570] - PCI: rockchip: Write PCI Device ID to correct register (Myron Stowe) [RHEL-2570] - PCI: rockchip: Remove writes to unused registers (Myron Stowe) [RHEL-2570] - PCI: rcar: Use correct product family name for Renesas R-Car (Myron Stowe) [RHEL-2570] - PCI: rcar-host: Remove unused static pcie_base and pcie_dev (Myron Stowe) [RHEL-2570] - PCI: qcom: Do not advertise hotplug capability for IP v2.1.0 (Myron Stowe) [RHEL-2570] - PCI: qcom: Do not advertise hotplug capability for IP v1.0.0 (Myron Stowe) [RHEL-2570] - PCI: qcom: Use post init sequence of IP v2.3.2 for v2.4.0 (Myron Stowe) [RHEL-2570] - PCI: qcom: Do not advertise hotplug capability for IP v2.3.2 (Myron Stowe) [RHEL-2570] - PCI: qcom: Do not advertise hotplug capability for IPs v2.3.3 and v2.9.0 (Myron Stowe) [RHEL-2570] - PCI: qcom: Do not advertise hotplug capability for IPs v2.7.0 and v1.9.0 (Myron Stowe) [RHEL-2570] - PCI: qcom: Disable write access to read only registers for IP v2.9.0 (Myron Stowe) [RHEL-2570] - PCI: qcom: Use DWC helpers for modifying the read-only DBI registers (Myron Stowe) [RHEL-2570] - PCI: qcom: Disable write access to read only registers for IP v2.3.3 (Myron Stowe) [RHEL-2570] - PCI: ftpci100: Release the clock resources (Myron Stowe) [RHEL-2570] - PCI: imx6: Save and restore root port MSI control in suspend and resume (Myron Stowe) [RHEL-2570] - PCI: cadence: Fix Gen2 Link Retraining process (Myron Stowe) [RHEL-2570] - dt-bindings: PCI: qcom: Add SDX65 SoC (Myron Stowe) [RHEL-2570] - Documentation: PCI: correct spelling (Myron Stowe) [RHEL-2570] - PCI: Add pci_clear_master() stub for non-CONFIG_PCI (Myron Stowe) [RHEL-2570] - PCI: Expand comment about sorting pci_ids.h entries (Myron Stowe) [RHEL-2570] - PCI: Add function 1 DMA alias quirk for Marvell 88SE9235 (Myron Stowe) [RHEL-2570] - PCI: Delay after FLR of Solidigm P44 Pro NVMe (Myron Stowe) [RHEL-2570] - PCI: Release resource invalidated by coalescing (Myron Stowe) [RHEL-2570] - PCI/ACPI: Call _REG when transitioning D-states (Myron Stowe) [RHEL-2570] - PCI/ACPI: Validate acpi_pci_set_power_state() parameter (Myron Stowe) [RHEL-2570] - PCI/PM: Avoid putting EloPOS E2/S2/H2 PCIe Ports in D3cold (Myron Stowe) [RHEL-2570] - PCI/PM: Shorten pci_bridge_wait_for_secondary_bus() wait time for slow links (Myron Stowe) [RHEL-2570] - PCI: acpiphp: Reassign resources on bridge if necessary (Myron Stowe) [RHEL-2570] - PCI: pciehp: Cancel bringup sequence if card is not present (Myron Stowe) [RHEL-2570] - PCI: pciehp: Simplify Attention Button logging (Myron Stowe) [RHEL-2570] - Merge branch 'pci/enumeration' (Myron Stowe) [RHEL-2570] - PCI: Add failed link recovery for device reset events (Myron Stowe) [RHEL-2570] - PCI: Work around PCIe link training failures (Myron Stowe) [RHEL-2570] - PCI: Use pcie_wait_for_link_status() in pcie_wait_for_link_delay() (Myron Stowe) [RHEL-2570] - PCI: Add support for polling DLLLA to pcie_retrain_link() (Myron Stowe) [RHEL-2570] - PCI: Export pcie_retrain_link() for use outside ASPM (Myron Stowe) [RHEL-2570] - PCI: Export PCIe link retrain timeout (Myron Stowe) [RHEL-2570] - PCI: Execute quirk_enable_clear_retrain_link() earlier (Myron Stowe) [RHEL-2570] - PCI/ASPM: Factor out waiting for link training to complete (Myron Stowe) [RHEL-2570] - PCI/ASPM: Avoid unnecessary pcie_link_state use (Myron Stowe) [RHEL-2570] - PCI/ASPM: Use distinct local vars in pcie_retrain_link() (Myron Stowe) [RHEL-2570] - net/mlx5: Rely on dev->link_active_reporting (Myron Stowe) [RHEL-2570] - powerpc/eeh: Rely on dev->link_active_reporting (Myron Stowe) [RHEL-2570] - PCI: pciehp: Rely on dev->link_active_reporting (Myron Stowe) [RHEL-2570] - PCI: Initialize dev->link_active_reporting earlier (Myron Stowe) [RHEL-2570] - PCI: of: Propagate firmware node by calling device_set_node() (Myron Stowe) [RHEL-2570] - PCI: Add PCI_EXT_CAP_ID_PL_32GT define (Myron Stowe) [RHEL-2570] - PCI/ASPM: Remove unnecessary ASPM_STATE_L1SS check (Myron Stowe) [RHEL-2570] - PCI/ASPM: Rename L1.2-specific functions from 'l1ss' to 'l12' (Myron Stowe) [RHEL-2570] - PCI/ASPM: Set ASPM_STATE_L1 when driver enables L1.1 or L1.2 (Myron Stowe) [RHEL-2570] - PCI/ASPM: Set only ASPM_STATE_L1 when driver enables L1 (Myron Stowe) [RHEL-2570] - PCI/ASPM: Disable only ASPM_STATE_L1 when driver disables L1 (Myron Stowe) [RHEL-2570] - PCI/ASPM: Disable ASPM on MFD function removal to avoid use-after-free (Myron Stowe) [RHEL-2570] - Documentation: PCI: Tidy AER documentation (Myron Stowe) [RHEL-2570] - Documentation: PCI: Update cross references to .rst files (Myron Stowe) [RHEL-2570] - Documentation: PCI: Drop recommendation to configure AER Capability (Myron Stowe) [RHEL-2570] - PCI: Unexport pci_save_aer_state() (Myron Stowe) [RHEL-2570] - cpufreq: Fail driver register if it has adjust_perf without fast_switch (David Arcari) [RHEL-10047] - cpufreq: amd-pstate-ut: Fix kernel panic when loading the driver (David Arcari) [RHEL-10047] - cpufreq: amd-pstate-ut: Remove module parameter access (David Arcari) [RHEL-10047] - cpufreq: amd-pstate-ut: Modify the function to get the highest_perf value (David Arcari) [RHEL-10047] - cpufreq: amd-pstate: fix global sysfs attribute type (David Arcari) [RHEL-10047] - redhat/configs: set the default for amd-pstate to Active (EPP) (David Arcari) [RHEL-10047] - cpufreq: amd-pstate: Add a kernel config option to set default mode (David Arcari) [RHEL-10047] - cpufreq: amd-pstate: Set a fallback policy based on preferred_profile (David Arcari) [RHEL-10047] - ACPI: CPPC: Add definition for undefined FADT preferred PM profile value (David Arcari) [RHEL-10047] - cpufreq: amd-pstate: Make amd-pstate EPP driver name hyphenated (David Arcari) [RHEL-10047] - cpufreq: amd-pstate: Write CPPC enable bit per-socket (David Arcari) [RHEL-10047] - cpufreq: amd-pstate: move to use bus_get_dev_root() (David Arcari) [RHEL-10047] - vfio/group: Defer device removal from no-iommu group (Alex Williamson) [RHEL-3400] - cpupower: Add Georgian translation to Makefile LANGUAGES (Joel Slebodnick) [RHEL-10052] - cpupower: Fix cpuidle_set to accept only numeric values for idle-set operation. (Joel Slebodnick) [RHEL-10052] - cpupower: Add turbo-boost support in cpupower (Joel Slebodnick) [RHEL-10052] - cpupower: Add support for amd_pstate mode change (Joel Slebodnick) [RHEL-10052] - cpupower: Add EPP value change support (Joel Slebodnick) [RHEL-10052] - cpupower: Add is_valid_path API (Joel Slebodnick) [RHEL-10052] - cpupower: Recognise amd-pstate active mode driver (Joel Slebodnick) [RHEL-10052] - redhat: bump libcpupower soname to match upstream (Joel Slebodnick) [RHEL-10052] - cpupower: Bump soname version (Joel Slebodnick) [RHEL-10052] - cpupower: Make TSC read per CPU for Mperf monitor (Joel Slebodnick) [RHEL-10052] - cpupower:Fix resource leaks in sysfs_get_enabled() (Joel Slebodnick) [RHEL-10052] - cpupower: rapl monitor - shows the used power consumption in uj for each rapl domain (Joel Slebodnick) [RHEL-10052] - cpupower: Introduce powercap intel-rapl library and powercap-info command (Joel Slebodnick) [RHEL-10052] - cpupower: Add Georgian translation (Joel Slebodnick) [RHEL-10052] - tools/cpupower: Choose base_cpu to display default cpupower details (Joel Slebodnick) [RHEL-10052] - treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE (Joel Slebodnick) [RHEL-10052] - Revert "cnic: don't pass bogus GFP_ flags to dma_alloc_coherent" (Chris Leech) [RHEL-2542] - Revert "dma-mapping: reject __GFP_COMP in dma_alloc_attrs" (Chris Leech) [RHEL-2542] - drm/amd: flush any delayed gfxoff on suspend entry (Mika Penttilä) [2232662] - drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix (Mika Penttilä) [2232662] - drm/amd/pm: skip the RLC stop when S0i3 suspend for SMU v13.0.4/11 (Mika Penttilä) [2232662] - Revert "net/mlx5e: Switch to using napi_build_skb()" (Mohammad Kabat) [RHEL-1267] Resolves: RHEL-10047, RHEL-10052, RHEL-11351, RHEL-2570, RHEL-3400 Signed-off-by: Scott Weaver <scweaver@redhat.com> |
||
|---|---|---|
| .gitignore | ||
| Makefile.rhelver | ||
| Module.kabi_aarch64 | ||
| Module.kabi_dup_aarch64 | ||
| Module.kabi_dup_ppc64le | ||
| Module.kabi_dup_s390x | ||
| Module.kabi_dup_x86_64 | ||
| Module.kabi_ppc64le | ||
| Module.kabi_s390x | ||
| Module.kabi_x86_64 | ||
| README.rst | ||
| check-kabi | ||
| cpupower.config | ||
| cpupower.service | ||
| dracut-virt.conf | ||
| filter-aarch64.sh.rhel | ||
| filter-armv7hl.sh.rhel | ||
| filter-modules.sh.rhel | ||
| filter-ppc64le.sh.rhel | ||
| filter-s390x.sh.rhel | ||
| filter-x86_64.sh.rhel | ||
| gating.yaml | ||
| generate_all_configs.sh | ||
| kernel-aarch64-64k-debug-rhel.config | ||
| kernel-aarch64-64k-rhel.config | ||
| kernel-aarch64-debug-rhel.config | ||
| kernel-aarch64-rhel.config | ||
| kernel-aarch64-rt-debug-rhel.config | ||
| kernel-aarch64-rt-rhel.config | ||
| kernel-local | ||
| kernel-ppc64le-debug-rhel.config | ||
| kernel-ppc64le-rhel.config | ||
| kernel-s390x-debug-rhel.config | ||
| kernel-s390x-rhel.config | ||
| kernel-s390x-zfcpdump-rhel.config | ||
| kernel-x86_64-debug-rhel.config | ||
| kernel-x86_64-rhel.config | ||
| kernel-x86_64-rt-debug-rhel.config | ||
| kernel-x86_64-rt-rhel.config | ||
| kernel.spec | ||
| kvm_stat.logrotate | ||
| linux-kernel-test.patch | ||
| merge.pl | ||
| mod-denylist.sh | ||
| mod-extra.list.rhel | ||
| mod-internal.list | ||
| mod-kvm.list | ||
| mod-partner.list | ||
| mod-sign.sh | ||
| parallel_xz.sh | ||
| partial-kgcov-snip.config | ||
| patch-5.14-redhat.patch | ||
| process_configs.sh | ||
| rheldup3.x509 | ||
| rhelima.x509 | ||
| rhelima_centos.x509 | ||
| rhelimaca1.x509 | ||
| rhelkpatch1.x509 | ||
| rpminspect.yaml | ||
| sources | ||
| update_scripts.sh | ||
| x509.genkey.centos | ||
| x509.genkey.rhel | ||
README.rst
=================== The Kernel dist-git =================== The kernel is maintained in a `source tree`_ rather than directly in dist-git. The specfile is maintained as a `template`_ in the source tree along with a set of build scripts to generate configurations, (S)RPMs, and to populate the dist-git repository. The `documentation`_ for the source tree covers how to contribute and maintain the tree. If you're looking for the downstream patch set it's available in the source tree with "git log master..ark-patches" or `online`_. Each release in dist-git is tagged in the source repository so you can easily check out the source tree for a build. The tags are in the format name-version-release, but note release doesn't contain the dist tag since the source can be built in different build roots (Fedora, CentOS, etc.) .. _source tree: https://gitlab.com/cki-project/kernel-ark.git .. _template: https://gitlab.com/cki-project/kernel-ark/-/blob/os-build/redhat/kernel.spec.template .. _documentation: https://gitlab.com/cki-project/kernel-ark/-/wikis/home .. _online: https://gitlab.com/cki-project/kernel-ark/-/commits/ark-patches