kernel-5.14.0-373.el9

* Wed Oct 04 2023 Scott Weaver <scweaver@redhat.com> [5.14.0-373.el9] - CI: Enable 'dist-self-test' for C9S/RHEL9 (Vitaly Kuznetsov) - redhat: Update 'dist-self-test-data' (Vitaly Kuznetsov) - redhat: Explicitly disable CONFIG_COPS (Vitaly Kuznetsov) - redhat: Add dist-check-licenses target (Vitaly Kuznetsov) - redhat: Introduce "Verify SPDX-License-Identifier tags" selftest (Vitaly Kuznetsov) - redhat: Use kspdx-tool output for the License: field (Vitaly Kuznetsov) - cpuidle, intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE *again* (David Arcari) [RHEL-11351] - Revert "intel_idle: Add support for using intel_idle in a VM guest using just hlt" (David Arcari) [RHEL-11351] - Revert "intel_idle: Add a "Long HLT" C1 state for the VM guest mode" (David Arcari) [RHEL-11351] - Revert "intel_idle: Add __init annotation to matchup_vm_state_with_baremetal()" (David Arcari) [RHEL-11351] - intel_idle: Add __init annotation to matchup_vm_state_with_baremetal() (David Arcari) [RHEL-11351] - intel_idle: Add a "Long HLT" C1 state for the VM guest mode (David Arcari) [RHEL-11351] - intel_idle: Add support for using intel_idle in a VM guest using just hlt (David Arcari) [RHEL-11351] - intel_idle: clean up the (new) state_update_enter_method function (David Arcari) [RHEL-11351] - intel_idle: refactor state->enter manipulation into its own function (David Arcari) [RHEL-11351] - intel_idle: mark few variables as __read_mostly (David Arcari) [RHEL-11351] - intel_idle: do not sprinkle module parameter definitions around (David Arcari) [RHEL-11351] - intel_idle: fix confusing message (David Arcari) [RHEL-11351] - intel_idle: improve C-state flags handling robustness (David Arcari) [RHEL-11351] - intel_idle: further intel_idle_init_cstates_icpu() cleanup (David Arcari) [RHEL-11351] - intel_idle: clean up intel_idle_init_cstates_icpu() (David Arcari) [RHEL-11351] - intel_idle: use pr_info() instead of printk() (David Arcari) [RHEL-11351] - PCI: Free released resource after coalescing (Myron Stowe) [RHEL-2570] - dt-bindings: PCI: qcom: Fix SDX65 compatible (Myron Stowe) [RHEL-2570] - PCI: rockchip: Use 64-bit mask on MSI 64-bit PCI address (Myron Stowe) [RHEL-2570] - PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus (Myron Stowe) [RHEL-2570] - Revert "PCI: mvebu: Mark driver as BROKEN" (Myron Stowe) [RHEL-2570] - MAINTAINERS: Add Manivannan Sadhasivam as DesignWare PCIe driver maintainer (Myron Stowe) [RHEL-2570] - PCI: xgene-msi: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: tegra: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: rockchip-host: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: mvebu: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: mt7621: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: mediatek-gen3: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: mediatek: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: iproc: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: hisi-error: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: dwc: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: j721e: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: brcmstb: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: altera-msi: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: altera: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: aardvark: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570] - PCI: layerscape: Add the endpoint linkup notifier support (Myron Stowe) [RHEL-2570] - PCI: endpoint: pci-epf-vntb: Fix typo in comments (Myron Stowe) [RHEL-2570] - MAINTAINERS: Add PCI MHI endpoint function driver under MHI bus (Myron Stowe) [RHEL-2570] - PCI: endpoint: Add PCI Endpoint function driver for MHI bus (Myron Stowe) [RHEL-2570] - PCI: qcom-ep: Add support for BME notification (Myron Stowe) [RHEL-2570] - PCI: qcom-ep: Add support for Link down notification (Myron Stowe) [RHEL-2570] - PCI: endpoint: Add BME notifier support (Myron Stowe) [RHEL-2570] - PCI: endpoint: Add linkdown notifier support (Myron Stowe) [RHEL-2570] - PCI: endpoint: Return error if EPC is started/stopped multiple times (Myron Stowe) [RHEL-2570] - PCI: endpoint: Pass EPF device ID to the probe function (Myron Stowe) [RHEL-2570] - PCI: endpoint: Add missing documentation about the MSI/MSI-X range (Myron Stowe) [RHEL-2570] - PCI: endpoint: Improve pci_epf_type_add_cfs() (Myron Stowe) [RHEL-2570] - PCI: endpoint: functions/pci-epf-test: Fix dma_chan direction (Myron Stowe) [RHEL-2570] - misc: pci_endpoint_test: Simplify pci_endpoint_test_msi_irq() (Myron Stowe) [RHEL-2570] - misc: pci_endpoint_test: Do not write status in IRQ handler (Myron Stowe) [RHEL-2570] - misc: pci_endpoint_test: Re-init completion for every test (Myron Stowe) [RHEL-2570] - misc: pci_endpoint_test: Free IRQs before removing the device (Myron Stowe) [RHEL-2570] - PCI: epf-test: Simplify transfers result print (Myron Stowe) [RHEL-2570] - PCI: epf-test: Simplify DMA support checks (Myron Stowe) [RHEL-2570] - PCI: epf-test: Cleanup request result handling (Myron Stowe) [RHEL-2570] - PCI: epf-test: Cleanup pci_epf_test_cmd_handler() (Myron Stowe) [RHEL-2570] - PCI: epf-test: Improve handling of command and status registers (Myron Stowe) [RHEL-2570] - PCI: epf-test: Simplify IRQ test commands execution (Myron Stowe) [RHEL-2570] - PCI: epf-test: Simplify pci_epf_test_raise_irq() (Myron Stowe) [RHEL-2570] - PCI: epf-test: Simplify read/write/copy test functions (Myron Stowe) [RHEL-2570] - PCI: epf-test: Use dmaengine_submit() to initiate DMA transfer (Myron Stowe) [RHEL-2570] - PCI: epf-test: Fix DMA transfer completion detection (Myron Stowe) [RHEL-2570] - PCI: epf-test: Fix DMA transfer completion initialization (Myron Stowe) [RHEL-2570] - PCI: endpoint: Move pci_epf_type_add_cfs() code (Myron Stowe) [RHEL-2570] - PCI: endpoint: Automatically create a function specific attributes group (Myron Stowe) [RHEL-2570] - PCI: endpoint: Fix a Kconfig prompt of vNTB driver (Myron Stowe) [RHEL-2570] - PCI: endpoint: Fix Kconfig indent style (Myron Stowe) [RHEL-2570] - PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain() (Myron Stowe) [RHEL-2570] - PCI: vmd: Reset VMD config register between soft reboots (Myron Stowe) [RHEL-2570] - PCI: rockchip: Set address alignment for endpoint mode (Myron Stowe) [RHEL-2570] - PCI: rockchip: Don't advertise MSI-X in PCIe capabilities (Myron Stowe) [RHEL-2570] - PCI: rockchip: Use u32 variable to access 32-bit registers (Myron Stowe) [RHEL-2570] - PCI: rockchip: Fix window mapping and address translation for endpoint (Myron Stowe) [RHEL-2570] - PCI: rockchip: Fix legacy IRQ generation for RK3399 PCIe endpoint core (Myron Stowe) [RHEL-2570] - dt-bindings: PCI: Update the RK3399 example to a valid one (Myron Stowe) [RHEL-2570] - dt-bindings: PCI: Convert Rockchip RK3399 PCIe to DT schema (Myron Stowe) [RHEL-2570] - PCI: rockchip: Add poll and timeout to wait for PHY PLLs to be locked (Myron Stowe) [RHEL-2570] - PCI: rockchip: Assert PCI Configuration Enable bit after probe (Myron Stowe) [RHEL-2570] - PCI: rockchip: Write PCI Device ID to correct register (Myron Stowe) [RHEL-2570] - PCI: rockchip: Remove writes to unused registers (Myron Stowe) [RHEL-2570] - PCI: rcar: Use correct product family name for Renesas R-Car (Myron Stowe) [RHEL-2570] - PCI: rcar-host: Remove unused static pcie_base and pcie_dev (Myron Stowe) [RHEL-2570] - PCI: qcom: Do not advertise hotplug capability for IP v2.1.0 (Myron Stowe) [RHEL-2570] - PCI: qcom: Do not advertise hotplug capability for IP v1.0.0 (Myron Stowe) [RHEL-2570] - PCI: qcom: Use post init sequence of IP v2.3.2 for v2.4.0 (Myron Stowe) [RHEL-2570] - PCI: qcom: Do not advertise hotplug capability for IP v2.3.2 (Myron Stowe) [RHEL-2570] - PCI: qcom: Do not advertise hotplug capability for IPs v2.3.3 and v2.9.0 (Myron Stowe) [RHEL-2570] - PCI: qcom: Do not advertise hotplug capability for IPs v2.7.0 and v1.9.0 (Myron Stowe) [RHEL-2570] - PCI: qcom: Disable write access to read only registers for IP v2.9.0 (Myron Stowe) [RHEL-2570] - PCI: qcom: Use DWC helpers for modifying the read-only DBI registers (Myron Stowe) [RHEL-2570] - PCI: qcom: Disable write access to read only registers for IP v2.3.3 (Myron Stowe) [RHEL-2570] - PCI: ftpci100: Release the clock resources (Myron Stowe) [RHEL-2570] - PCI: imx6: Save and restore root port MSI control in suspend and resume (Myron Stowe) [RHEL-2570] - PCI: cadence: Fix Gen2 Link Retraining process (Myron Stowe) [RHEL-2570] - dt-bindings: PCI: qcom: Add SDX65 SoC (Myron Stowe) [RHEL-2570] - Documentation: PCI: correct spelling (Myron Stowe) [RHEL-2570] - PCI: Add pci_clear_master() stub for non-CONFIG_PCI (Myron Stowe) [RHEL-2570] - PCI: Expand comment about sorting pci_ids.h entries (Myron Stowe) [RHEL-2570] - PCI: Add function 1 DMA alias quirk for Marvell 88SE9235 (Myron Stowe) [RHEL-2570] - PCI: Delay after FLR of Solidigm P44 Pro NVMe (Myron Stowe) [RHEL-2570] - PCI: Release resource invalidated by coalescing (Myron Stowe) [RHEL-2570] - PCI/ACPI: Call _REG when transitioning D-states (Myron Stowe) [RHEL-2570] - PCI/ACPI: Validate acpi_pci_set_power_state() parameter (Myron Stowe) [RHEL-2570] - PCI/PM: Avoid putting EloPOS E2/S2/H2 PCIe Ports in D3cold (Myron Stowe) [RHEL-2570] - PCI/PM: Shorten pci_bridge_wait_for_secondary_bus() wait time for slow links (Myron Stowe) [RHEL-2570] - PCI: acpiphp: Reassign resources on bridge if necessary (Myron Stowe) [RHEL-2570] - PCI: pciehp: Cancel bringup sequence if card is not present (Myron Stowe) [RHEL-2570] - PCI: pciehp: Simplify Attention Button logging (Myron Stowe) [RHEL-2570] - Merge branch 'pci/enumeration' (Myron Stowe) [RHEL-2570] - PCI: Add failed link recovery for device reset events (Myron Stowe) [RHEL-2570] - PCI: Work around PCIe link training failures (Myron Stowe) [RHEL-2570] - PCI: Use pcie_wait_for_link_status() in pcie_wait_for_link_delay() (Myron Stowe) [RHEL-2570] - PCI: Add support for polling DLLLA to pcie_retrain_link() (Myron Stowe) [RHEL-2570] - PCI: Export pcie_retrain_link() for use outside ASPM (Myron Stowe) [RHEL-2570] - PCI: Export PCIe link retrain timeout (Myron Stowe) [RHEL-2570] - PCI: Execute quirk_enable_clear_retrain_link() earlier (Myron Stowe) [RHEL-2570] - PCI/ASPM: Factor out waiting for link training to complete (Myron Stowe) [RHEL-2570] - PCI/ASPM: Avoid unnecessary pcie_link_state use (Myron Stowe) [RHEL-2570] - PCI/ASPM: Use distinct local vars in pcie_retrain_link() (Myron Stowe) [RHEL-2570] - net/mlx5: Rely on dev->link_active_reporting (Myron Stowe) [RHEL-2570] - powerpc/eeh: Rely on dev->link_active_reporting (Myron Stowe) [RHEL-2570] - PCI: pciehp: Rely on dev->link_active_reporting (Myron Stowe) [RHEL-2570] - PCI: Initialize dev->link_active_reporting earlier (Myron Stowe) [RHEL-2570] - PCI: of: Propagate firmware node by calling device_set_node() (Myron Stowe) [RHEL-2570] - PCI: Add PCI_EXT_CAP_ID_PL_32GT define (Myron Stowe) [RHEL-2570] - PCI/ASPM: Remove unnecessary ASPM_STATE_L1SS check (Myron Stowe) [RHEL-2570] - PCI/ASPM: Rename L1.2-specific functions from 'l1ss' to 'l12' (Myron Stowe) [RHEL-2570] - PCI/ASPM: Set ASPM_STATE_L1 when driver enables L1.1 or L1.2 (Myron Stowe) [RHEL-2570] - PCI/ASPM: Set only ASPM_STATE_L1 when driver enables L1 (Myron Stowe) [RHEL-2570] - PCI/ASPM: Disable only ASPM_STATE_L1 when driver disables L1 (Myron Stowe) [RHEL-2570] - PCI/ASPM: Disable ASPM on MFD function removal to avoid use-after-free (Myron Stowe) [RHEL-2570] - Documentation: PCI: Tidy AER documentation (Myron Stowe) [RHEL-2570] - Documentation: PCI: Update cross references to .rst files (Myron Stowe) [RHEL-2570] - Documentation: PCI: Drop recommendation to configure AER Capability (Myron Stowe) [RHEL-2570] - PCI: Unexport pci_save_aer_state() (Myron Stowe) [RHEL-2570] - cpufreq: Fail driver register if it has adjust_perf without fast_switch (David Arcari) [RHEL-10047] - cpufreq: amd-pstate-ut: Fix kernel panic when loading the driver (David Arcari) [RHEL-10047] - cpufreq: amd-pstate-ut: Remove module parameter access (David Arcari) [RHEL-10047] - cpufreq: amd-pstate-ut: Modify the function to get the highest_perf value (David Arcari) [RHEL-10047] - cpufreq: amd-pstate: fix global sysfs attribute type (David Arcari) [RHEL-10047] - redhat/configs: set the default for amd-pstate to Active (EPP) (David Arcari) [RHEL-10047] - cpufreq: amd-pstate: Add a kernel config option to set default mode (David Arcari) [RHEL-10047] - cpufreq: amd-pstate: Set a fallback policy based on preferred_profile (David Arcari) [RHEL-10047] - ACPI: CPPC: Add definition for undefined FADT preferred PM profile value (David Arcari) [RHEL-10047] - cpufreq: amd-pstate: Make amd-pstate EPP driver name hyphenated (David Arcari) [RHEL-10047] - cpufreq: amd-pstate: Write CPPC enable bit per-socket (David Arcari) [RHEL-10047] - cpufreq: amd-pstate: move to use bus_get_dev_root() (David Arcari) [RHEL-10047] - vfio/group: Defer device removal from no-iommu group (Alex Williamson) [RHEL-3400] - cpupower: Add Georgian translation to Makefile LANGUAGES (Joel Slebodnick) [RHEL-10052] - cpupower: Fix cpuidle_set to accept only numeric values for idle-set operation. (Joel Slebodnick) [RHEL-10052] - cpupower: Add turbo-boost support in cpupower (Joel Slebodnick) [RHEL-10052] - cpupower: Add support for amd_pstate mode change (Joel Slebodnick) [RHEL-10052] - cpupower: Add EPP value change support (Joel Slebodnick) [RHEL-10052] - cpupower: Add is_valid_path API (Joel Slebodnick) [RHEL-10052] - cpupower: Recognise amd-pstate active mode driver (Joel Slebodnick) [RHEL-10052] - redhat: bump libcpupower soname to match upstream (Joel Slebodnick) [RHEL-10052] - cpupower: Bump soname version (Joel Slebodnick) [RHEL-10052] - cpupower: Make TSC read per CPU for Mperf monitor (Joel Slebodnick) [RHEL-10052] - cpupower:Fix resource leaks in sysfs_get_enabled() (Joel Slebodnick) [RHEL-10052] - cpupower: rapl monitor - shows the used power consumption in uj for each rapl domain (Joel Slebodnick) [RHEL-10052] - cpupower: Introduce powercap intel-rapl library and powercap-info command (Joel Slebodnick) [RHEL-10052] - cpupower: Add Georgian translation (Joel Slebodnick) [RHEL-10052] - tools/cpupower: Choose base_cpu to display default cpupower details (Joel Slebodnick) [RHEL-10052] - treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE (Joel Slebodnick) [RHEL-10052] - Revert "cnic: don't pass bogus GFP_ flags to dma_alloc_coherent" (Chris Leech) [RHEL-2542] - Revert "dma-mapping: reject __GFP_COMP in dma_alloc_attrs" (Chris Leech) [RHEL-2542] - drm/amd: flush any delayed gfxoff on suspend entry (Mika Penttilä) [2232662] - drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix (Mika Penttilä) [2232662] - drm/amd/pm: skip the RLC stop when S0i3 suspend for SMU v13.0.4/11 (Mika Penttilä) [2232662] - Revert "net/mlx5e: Switch to using napi_build_skb()" (Mohammad Kabat) [RHEL-1267] Resolves: RHEL-10047, RHEL-10052, RHEL-11351, RHEL-2570, RHEL-3400 Signed-off-by: Scott Weaver <scweaver@redhat.com>
2023-10-04 19:00:30 -04:00 · 2023-10-04 19:00:30 -04:00 · e4a5efaad5
parent c10ddfc31c
commit e4a5efaad5
18 changed files with 209 additions and 20 deletions
--- a/Makefile.rhelver
+++ b/Makefile.rhelver
@ -12,7 +12,7 @@ RHEL_MINOR = 4
 #
 # Use this spot to avoid future merge conflicts.
 # Do not trim this comment.
-RHEL_RELEASE = 372
+RHEL_RELEASE = 373

 #
 # ZSTREAM
--- a/kernel-aarch64-64k-debug-rhel.config
+++ b/kernel-aarch64-64k-debug-rhel.config
@ -907,6 +907,7 @@ CONFIG_CONSOLE_LOGLEVEL_QUIET=4
 CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
 # CONFIG_CONTEXT_TRACKING_USER_FORCE is not set
+# CONFIG_COPS is not set
 CONFIG_CORDIC=m
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_CORESIGHT_CATU=m
--- a/kernel-aarch64-64k-rhel.config
+++ b/kernel-aarch64-64k-rhel.config
@ -907,6 +907,7 @@ CONFIG_CONSOLE_LOGLEVEL_QUIET=4
 CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
 # CONFIG_CONTEXT_TRACKING_USER_FORCE is not set
+# CONFIG_COPS is not set
 CONFIG_CORDIC=m
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_CORESIGHT_CATU=m
--- a/kernel-aarch64-debug-rhel.config
+++ b/kernel-aarch64-debug-rhel.config
@ -904,6 +904,7 @@ CONFIG_CONSOLE_LOGLEVEL_QUIET=4
 CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
 # CONFIG_CONTEXT_TRACKING_USER_FORCE is not set
+# CONFIG_COPS is not set
 CONFIG_CORDIC=m
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_CORESIGHT_CATU=m
--- a/kernel-aarch64-rhel.config
+++ b/kernel-aarch64-rhel.config
@ -904,6 +904,7 @@ CONFIG_CONSOLE_LOGLEVEL_QUIET=4
 CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
 # CONFIG_CONTEXT_TRACKING_USER_FORCE is not set
+# CONFIG_COPS is not set
 CONFIG_CORDIC=m
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_CORESIGHT_CATU=m
--- a/kernel-aarch64-rt-debug-rhel.config
+++ b/kernel-aarch64-rt-debug-rhel.config
@ -916,6 +916,7 @@ CONFIG_CONSOLE_LOGLEVEL_QUIET=4
 CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
 # CONFIG_CONTEXT_TRACKING_USER_FORCE is not set
+# CONFIG_COPS is not set
 CONFIG_CORDIC=m
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_COREDUMP=y
--- a/kernel-aarch64-rt-rhel.config
+++ b/kernel-aarch64-rt-rhel.config
@ -916,6 +916,7 @@ CONFIG_CONSOLE_LOGLEVEL_QUIET=4
 CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
 # CONFIG_CONTEXT_TRACKING_USER_FORCE is not set
+# CONFIG_COPS is not set
 CONFIG_CORDIC=m
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_COREDUMP=y
--- a/kernel-ppc64le-debug-rhel.config
+++ b/kernel-ppc64le-debug-rhel.config
@ -730,6 +730,7 @@ CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
 CONFIG_CONSOLE_LOGLEVEL_QUIET=4
 CONFIG_CONTEXT_SWITCH_TRACER=y
 # CONFIG_CONTEXT_TRACKING_USER_FORCE is not set
+# CONFIG_COPS is not set
 CONFIG_CORDIC=m
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_CORTINA_PHY=m
--- a/kernel-ppc64le-rhel.config
+++ b/kernel-ppc64le-rhel.config
@ -730,6 +730,7 @@ CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
 CONFIG_CONSOLE_LOGLEVEL_QUIET=4
 CONFIG_CONTEXT_SWITCH_TRACER=y
 # CONFIG_CONTEXT_TRACKING_USER_FORCE is not set
+# CONFIG_COPS is not set
 CONFIG_CORDIC=m
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_CORTINA_PHY=m
--- a/kernel-s390x-debug-rhel.config
+++ b/kernel-s390x-debug-rhel.config
@ -733,6 +733,7 @@ CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
 CONFIG_CONSOLE_LOGLEVEL_QUIET=4
 CONFIG_CONTEXT_SWITCH_TRACER=y
 # CONFIG_CONTEXT_TRACKING_USER_FORCE is not set
+# CONFIG_COPS is not set
 CONFIG_CORDIC=m
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_CORTINA_PHY=m
--- a/kernel-s390x-rhel.config
+++ b/kernel-s390x-rhel.config
@ -733,6 +733,7 @@ CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
 CONFIG_CONSOLE_LOGLEVEL_QUIET=4
 CONFIG_CONTEXT_SWITCH_TRACER=y
 # CONFIG_CONTEXT_TRACKING_USER_FORCE is not set
+# CONFIG_COPS is not set
 CONFIG_CORDIC=m
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_CORTINA_PHY=m
--- a/kernel-s390x-zfcpdump-rhel.config
+++ b/kernel-s390x-zfcpdump-rhel.config
@ -738,6 +738,7 @@ CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
 CONFIG_CONSOLE_LOGLEVEL_QUIET=4
 CONFIG_CONTEXT_SWITCH_TRACER=y
 # CONFIG_CONTEXT_TRACKING_USER_FORCE is not set
+# CONFIG_COPS is not set
 CONFIG_CORDIC=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_CORTINA_PHY=m
--- a/kernel-x86_64-debug-rhel.config
+++ b/kernel-x86_64-debug-rhel.config
@ -763,6 +763,7 @@ CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
 CONFIG_CONSOLE_LOGLEVEL_QUIET=4
 CONFIG_CONTEXT_SWITCH_TRACER=y
 # CONFIG_CONTEXT_TRACKING_USER_FORCE is not set
+# CONFIG_COPS is not set
 CONFIG_CORDIC=m
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_CORTINA_PHY=m
@ -6630,6 +6631,7 @@ CONFIG_X86_ACPI_CPUFREQ_CPB=y
 CONFIG_X86_ACPI_CPUFREQ=m
 CONFIG_X86_AMD_FREQ_SENSITIVITY=m
 CONFIG_X86_AMD_PLATFORM_DEVICE=y
+CONFIG_X86_AMD_PSTATE_DEFAULT_MODE=3
 CONFIG_X86_AMD_PSTATE_UT=m
 CONFIG_X86_AMD_PSTATE=y
 CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
--- a/kernel-x86_64-rhel.config
+++ b/kernel-x86_64-rhel.config
@ -763,6 +763,7 @@ CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
 CONFIG_CONSOLE_LOGLEVEL_QUIET=4
 CONFIG_CONTEXT_SWITCH_TRACER=y
 # CONFIG_CONTEXT_TRACKING_USER_FORCE is not set
+# CONFIG_COPS is not set
 CONFIG_CORDIC=m
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_CORTINA_PHY=m
@ -6607,6 +6608,7 @@ CONFIG_X86_ACPI_CPUFREQ_CPB=y
 CONFIG_X86_ACPI_CPUFREQ=m
 CONFIG_X86_AMD_FREQ_SENSITIVITY=m
 CONFIG_X86_AMD_PLATFORM_DEVICE=y
+CONFIG_X86_AMD_PSTATE_DEFAULT_MODE=3
 CONFIG_X86_AMD_PSTATE_UT=m
 CONFIG_X86_AMD_PSTATE=y
 # CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
--- a/kernel-x86_64-rt-debug-rhel.config
+++ b/kernel-x86_64-rt-debug-rhel.config
@ -777,6 +777,7 @@ CONFIG_CONSOLE_LOGLEVEL_QUIET=4
 CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
 # CONFIG_CONTEXT_TRACKING_USER_FORCE is not set
+# CONFIG_COPS is not set
 CONFIG_CORDIC=m
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_COREDUMP=y
@ -6795,6 +6796,7 @@ CONFIG_X86_ACPI_CPUFREQ_CPB=y
 CONFIG_X86_ACPI_CPUFREQ=m
 CONFIG_X86_AMD_FREQ_SENSITIVITY=m
 CONFIG_X86_AMD_PLATFORM_DEVICE=y
+CONFIG_X86_AMD_PSTATE_DEFAULT_MODE=3
 CONFIG_X86_AMD_PSTATE_UT=m
 CONFIG_X86_AMD_PSTATE=y
 CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
--- a/kernel-x86_64-rt-rhel.config
+++ b/kernel-x86_64-rt-rhel.config
@ -777,6 +777,7 @@ CONFIG_CONSOLE_LOGLEVEL_QUIET=4
 CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
 # CONFIG_CONTEXT_TRACKING_USER_FORCE is not set
+# CONFIG_COPS is not set
 CONFIG_CORDIC=m
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_COREDUMP=y
@ -6772,6 +6773,7 @@ CONFIG_X86_ACPI_CPUFREQ_CPB=y
 CONFIG_X86_ACPI_CPUFREQ=m
 CONFIG_X86_AMD_FREQ_SENSITIVITY=m
 CONFIG_X86_AMD_PLATFORM_DEVICE=y
+CONFIG_X86_AMD_PSTATE_DEFAULT_MODE=3
 CONFIG_X86_AMD_PSTATE_UT=m
 CONFIG_X86_AMD_PSTATE=y
 # CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
--- a/kernel.spec
+++ b/kernel.spec
@ -165,15 +165,15 @@ Summary: The Linux kernel
 # define buildid .local
 %define specversion 5.14.0
 %define patchversion 5.14
-%define pkgrelease 372
+%define pkgrelease 373
 %define kversion 5
-%define tarfile_release 5.14.0-372.el9
+%define tarfile_release 5.14.0-373.el9
 # This is needed to do merge window version magic
 %define patchlevel 14
 # This allows pkg_release to have configurable %%{?dist} tag
-%define specrelease 372%{?buildid}%{?dist}
+%define specrelease 373%{?buildid}%{?dist}
 # This defines the kabi tarball version
-%define kabiversion 5.14.0-372.el9
+%define kabiversion 5.14.0-373.el9

 #
 # End of genspec.sh variables
@ -629,7 +629,7 @@ Summary: The Linux kernel


 Name: kernel
-License: GPLv2 and Redistributable, no modification permitted
+License: ((GPL-2.0-only WITH Linux-syscall-note) OR BSD-2-Clause) AND ((GPL-2.0-only WITH Linux-syscall-note) OR BSD-3-Clause) AND ((GPL-2.0-only WITH Linux-syscall-note) OR CDDL-1.0) AND ((GPL-2.0-only WITH Linux-syscall-note) OR Linux-OpenIB) AND ((GPL-2.0-only WITH Linux-syscall-note) OR MIT) AND ((GPL-2.0-or-later WITH Linux-syscall-note) OR BSD-3-Clause) AND ((GPL-2.0-or-later WITH Linux-syscall-note) OR MIT) AND Apache-2.0 AND BSD-2-Clause AND BSD-3-Clause AND BSD-3-Clause-Clear AND GFDL-1.1-no-invariants-or-later AND GPL-1.0-or-later AND (GPL-1.0-or-later OR BSD-3-Clause) AND (GPL-1.0-or-later WITH Linux-syscall-note) AND GPL-2.0-only AND (GPL-2.0-only OR Apache-2.0) AND (GPL-2.0-only OR BSD-2-Clause) AND (GPL-2.0-only OR BSD-3-Clause) AND (GPL-2.0-only OR CDDL-1.0) AND (GPL-2.0-only OR GFDL-1.1-no-invariants-or-later) AND (GPL-2.0-only OR GFDL-1.2-no-invariants-only) AND (GPL-2.0-only WITH Linux-syscall-note) AND GPL-2.0-or-later AND (GPL-2.0-or-later OR BSD-2-Clause) AND (GPL-2.0-or-later OR BSD-3-Clause) AND (GPL-2.0-or-later OR CC-BY-4.0) AND (GPL-2.0-or-later WITH GCC-exception-2.0) AND (GPL-2.0-or-later WITH Linux-syscall-note) AND ISC AND LGPL-2.0-or-later AND (LGPL-2.0-or-later OR BSD-2-Clause) AND (LGPL-2.0-or-later WITH Linux-syscall-note) AND LGPL-2.1-only AND (LGPL-2.1-only OR BSD-2-Clause) AND (LGPL-2.1-only WITH Linux-syscall-note) AND LGPL-2.1-or-later AND (LGPL-2.1-or-later WITH Linux-syscall-note) AND (Linux-OpenIB OR GPL-2.0-only) AND (Linux-OpenIB OR GPL-2.0-only OR BSD-2-Clause) AND Linux-man-pages-copyleft AND MIT AND (MIT OR GPL-2.0-only) AND (MIT OR GPL-2.0-or-later) AND (MIT OR LGPL-2.1-only) AND (MPL-1.1 OR GPL-2.0-only) AND (X11 OR GPL-2.0-only) AND (X11 OR GPL-2.0-or-later) AND Zlib
 URL: https://www.kernel.org/
 Version: %{specversion}
 Release: %{pkg_release}
@ -1051,7 +1051,6 @@ It provides the kernel source files common to all builds.
 %package -n perf
 Summary: Performance monitoring for the Linux kernel
 Requires: bzip2
-License: GPLv2
 %description -n perf
 This package contains the perf tool, which enables performance monitoring
 of the Linux kernel.
@ -1088,14 +1087,12 @@ This package provides debug information for the perf python bindings.

 %package -n libperf
 Summary: The perf library from kernel source
-License: GPLv2
 %description -n libperf
 This package contains the kernel source perf library.

 %package -n libperf-devel
 Summary: Developement files for the perf library from kernel source
 Requires: libperf = %{version}-%{release}
-License: GPLv2
 %description -n libperf-devel
 This package includes libraries and header files needed for development
 of applications which use perf library from kernel source.
@ -1120,7 +1117,6 @@ This package provides debug information for the libperf package.
 %if %{with_tools}
 %package -n kernel-tools
 Summary: Assortment of tools for the Linux kernel
-License: GPLv2
 %ifarch %{cpupowerarchs}
 Provides:  cpupowerutils = 1:009-0.6.p1
 Obsoletes: cpupowerutils < 1:009-0.6.p1
@ -1138,14 +1134,12 @@ and the supporting documentation.

 %package -n kernel-tools-libs
 Summary: Libraries for the kernels-tools
-License: GPLv2
 %description -n kernel-tools-libs
 This package contains the libraries built from the tools/ directory
 from the kernel source.

 %package -n kernel-tools-libs-devel
 Summary: Assortment of tools for the Linux kernel
-License: GPLv2
 Requires: kernel-tools = %{version}-%{release}
 %ifarch %{cpupowerarchs}
 Provides:  cpupowerutils-devel = 1:009-0.6.p1
@ -1172,7 +1166,6 @@ This package provides debug information for package kernel-tools.

 %package -n rtla
 Summary: Real-Time Linux Analysis tools
-License: GPLv2
 Requires: libtraceevent
 Requires: libtracefs
 %description -n rtla
@ -1183,7 +1176,6 @@ about the properties and root causes of unexpected results.

 %package -n rv
 Summary: RV: Runtime Verification
-License: GPLv2
 %description -n rv
 Runtime Verification (RV) is a lightweight (yet rigorous) method that
 complements classical exhaustive verification techniques (such as model
@ -1201,7 +1193,6 @@ analysing the logical and timing behavior of Linux.

 %package -n bpftool
 Summary: Inspection and simple manipulation of eBPF programs and maps
-License: GPLv2
 Version: %{bpftoolversion}
 %description -n bpftool
 This package contains the bpftool, which allows inspection and simple
@ -1229,7 +1220,6 @@ This package provides debug information for the bpftool package.

 %package selftests-internal
 Summary: Kernel samples and selftests
-License: GPLv2
 Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3, fuse-libs, keyutils
 %description selftests-internal
 Kernel sample programs and selftests.
@ -3552,7 +3542,7 @@ fi

 %ifarch %{cpupowerarchs}
 %files -n kernel-tools-libs
-%{_libdir}/libcpupower.so.0
+%{_libdir}/libcpupower.so.1
 %{_libdir}/libcpupower.so.0.0.1

 %files -n kernel-tools-libs-devel
@ -3758,6 +3748,186 @@ fi
 #
 #
 %changelog
+* Wed Oct 04 2023 Scott Weaver <scweaver@redhat.com> [5.14.0-373.el9]
+- CI: Enable 'dist-self-test' for C9S/RHEL9 (Vitaly Kuznetsov)
+- redhat: Update 'dist-self-test-data' (Vitaly Kuznetsov)
+- redhat: Explicitly disable CONFIG_COPS (Vitaly Kuznetsov)
+- redhat: Add dist-check-licenses target (Vitaly Kuznetsov)
+- redhat: Introduce "Verify SPDX-License-Identifier tags" selftest (Vitaly Kuznetsov)
+- redhat: Use kspdx-tool output for the License: field (Vitaly Kuznetsov)
+- cpuidle, intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE *again* (David Arcari) [RHEL-11351]
+- Revert "intel_idle: Add support for using intel_idle in a VM guest using just hlt" (David Arcari) [RHEL-11351]
+- Revert "intel_idle: Add a "Long HLT" C1 state for the VM guest mode" (David Arcari) [RHEL-11351]
+- Revert "intel_idle: Add __init annotation to matchup_vm_state_with_baremetal()" (David Arcari) [RHEL-11351]
+- intel_idle: Add __init annotation to matchup_vm_state_with_baremetal() (David Arcari) [RHEL-11351]
+- intel_idle: Add a "Long HLT" C1 state for the VM guest mode (David Arcari) [RHEL-11351]
+- intel_idle: Add support for using intel_idle in a VM guest using just hlt (David Arcari) [RHEL-11351]
+- intel_idle: clean up the (new) state_update_enter_method function (David Arcari) [RHEL-11351]
+- intel_idle: refactor state->enter manipulation into its own function (David Arcari) [RHEL-11351]
+- intel_idle: mark few variables as __read_mostly (David Arcari) [RHEL-11351]
+- intel_idle: do not sprinkle module parameter definitions around (David Arcari) [RHEL-11351]
+- intel_idle: fix confusing message (David Arcari) [RHEL-11351]
+- intel_idle: improve C-state flags handling robustness (David Arcari) [RHEL-11351]
+- intel_idle: further intel_idle_init_cstates_icpu() cleanup (David Arcari) [RHEL-11351]
+- intel_idle: clean up intel_idle_init_cstates_icpu() (David Arcari) [RHEL-11351]
+- intel_idle: use pr_info() instead of printk() (David Arcari) [RHEL-11351]
+- PCI: Free released resource after coalescing (Myron Stowe) [RHEL-2570]
+- dt-bindings: PCI: qcom: Fix SDX65 compatible (Myron Stowe) [RHEL-2570]
+- PCI: rockchip: Use 64-bit mask on MSI 64-bit PCI address (Myron Stowe) [RHEL-2570]
+- PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus (Myron Stowe) [RHEL-2570]
+- Revert "PCI: mvebu: Mark driver as BROKEN" (Myron Stowe) [RHEL-2570]
+- MAINTAINERS: Add Manivannan Sadhasivam as DesignWare PCIe driver maintainer (Myron Stowe) [RHEL-2570]
+- PCI: xgene-msi: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570]
+- PCI: tegra: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570]
+- PCI: rockchip-host: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570]
+- PCI: mvebu: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570]
+- PCI: mt7621: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570]
+- PCI: mediatek-gen3: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570]
+- PCI: mediatek: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570]
+- PCI: iproc: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570]
+- PCI: hisi-error: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570]
+- PCI: dwc: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570]
+- PCI: j721e: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570]
+- PCI: brcmstb: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570]
+- PCI: altera-msi: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570]
+- PCI: altera: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570]
+- PCI: aardvark: Convert to platform remove callback returning void (Myron Stowe) [RHEL-2570]
+- PCI: layerscape: Add the endpoint linkup notifier support (Myron Stowe) [RHEL-2570]
+- PCI: endpoint: pci-epf-vntb: Fix typo in comments (Myron Stowe) [RHEL-2570]
+- MAINTAINERS: Add PCI MHI endpoint function driver under MHI bus (Myron Stowe) [RHEL-2570]
+- PCI: endpoint: Add PCI Endpoint function driver for MHI bus (Myron Stowe) [RHEL-2570]
+- PCI: qcom-ep: Add support for BME notification (Myron Stowe) [RHEL-2570]
+- PCI: qcom-ep: Add support for Link down notification (Myron Stowe) [RHEL-2570]
+- PCI: endpoint: Add BME notifier support (Myron Stowe) [RHEL-2570]
+- PCI: endpoint: Add linkdown notifier support (Myron Stowe) [RHEL-2570]
+- PCI: endpoint: Return error if EPC is started/stopped multiple times (Myron Stowe) [RHEL-2570]
+- PCI: endpoint: Pass EPF device ID to the probe function (Myron Stowe) [RHEL-2570]
+- PCI: endpoint: Add missing documentation about the MSI/MSI-X range (Myron Stowe) [RHEL-2570]
+- PCI: endpoint: Improve pci_epf_type_add_cfs() (Myron Stowe) [RHEL-2570]
+- PCI: endpoint: functions/pci-epf-test: Fix dma_chan direction (Myron Stowe) [RHEL-2570]
+- misc: pci_endpoint_test: Simplify pci_endpoint_test_msi_irq() (Myron Stowe) [RHEL-2570]
+- misc: pci_endpoint_test: Do not write status in IRQ handler (Myron Stowe) [RHEL-2570]
+- misc: pci_endpoint_test: Re-init completion for every test (Myron Stowe) [RHEL-2570]
+- misc: pci_endpoint_test: Free IRQs before removing the device (Myron Stowe) [RHEL-2570]
+- PCI: epf-test: Simplify transfers result print (Myron Stowe) [RHEL-2570]
+- PCI: epf-test: Simplify DMA support checks (Myron Stowe) [RHEL-2570]
+- PCI: epf-test: Cleanup request result handling (Myron Stowe) [RHEL-2570]
+- PCI: epf-test: Cleanup pci_epf_test_cmd_handler() (Myron Stowe) [RHEL-2570]
+- PCI: epf-test: Improve handling of command and status registers (Myron Stowe) [RHEL-2570]
+- PCI: epf-test: Simplify IRQ test commands execution (Myron Stowe) [RHEL-2570]
+- PCI: epf-test: Simplify pci_epf_test_raise_irq() (Myron Stowe) [RHEL-2570]
+- PCI: epf-test: Simplify read/write/copy test functions (Myron Stowe) [RHEL-2570]
+- PCI: epf-test: Use dmaengine_submit() to initiate DMA transfer (Myron Stowe) [RHEL-2570]
+- PCI: epf-test: Fix DMA transfer completion detection (Myron Stowe) [RHEL-2570]
+- PCI: epf-test: Fix DMA transfer completion initialization (Myron Stowe) [RHEL-2570]
+- PCI: endpoint: Move pci_epf_type_add_cfs() code (Myron Stowe) [RHEL-2570]
+- PCI: endpoint: Automatically create a function specific attributes group (Myron Stowe) [RHEL-2570]
+- PCI: endpoint: Fix a Kconfig prompt of vNTB driver (Myron Stowe) [RHEL-2570]
+- PCI: endpoint: Fix Kconfig indent style (Myron Stowe) [RHEL-2570]
+- PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain() (Myron Stowe) [RHEL-2570]
+- PCI: vmd: Reset VMD config register between soft reboots (Myron Stowe) [RHEL-2570]
+- PCI: rockchip: Set address alignment for endpoint mode (Myron Stowe) [RHEL-2570]
+- PCI: rockchip: Don't advertise MSI-X in PCIe capabilities (Myron Stowe) [RHEL-2570]
+- PCI: rockchip: Use u32 variable to access 32-bit registers (Myron Stowe) [RHEL-2570]
+- PCI: rockchip: Fix window mapping and address translation for endpoint (Myron Stowe) [RHEL-2570]
+- PCI: rockchip: Fix legacy IRQ generation for RK3399 PCIe endpoint core (Myron Stowe) [RHEL-2570]
+- dt-bindings: PCI: Update the RK3399 example to a valid one (Myron Stowe) [RHEL-2570]
+- dt-bindings: PCI: Convert Rockchip RK3399 PCIe to DT schema (Myron Stowe) [RHEL-2570]
+- PCI: rockchip: Add poll and timeout to wait for PHY PLLs to be locked (Myron Stowe) [RHEL-2570]
+- PCI: rockchip: Assert PCI Configuration Enable bit after probe (Myron Stowe) [RHEL-2570]
+- PCI: rockchip: Write PCI Device ID to correct register (Myron Stowe) [RHEL-2570]
+- PCI: rockchip: Remove writes to unused registers (Myron Stowe) [RHEL-2570]
+- PCI: rcar: Use correct product family name for Renesas R-Car (Myron Stowe) [RHEL-2570]
+- PCI: rcar-host: Remove unused static pcie_base and pcie_dev (Myron Stowe) [RHEL-2570]
+- PCI: qcom: Do not advertise hotplug capability for IP v2.1.0 (Myron Stowe) [RHEL-2570]
+- PCI: qcom: Do not advertise hotplug capability for IP v1.0.0 (Myron Stowe) [RHEL-2570]
+- PCI: qcom: Use post init sequence of IP v2.3.2 for v2.4.0 (Myron Stowe) [RHEL-2570]
+- PCI: qcom: Do not advertise hotplug capability for IP v2.3.2 (Myron Stowe) [RHEL-2570]
+- PCI: qcom: Do not advertise hotplug capability for IPs v2.3.3 and v2.9.0 (Myron Stowe) [RHEL-2570]
+- PCI: qcom: Do not advertise hotplug capability for IPs v2.7.0 and v1.9.0 (Myron Stowe) [RHEL-2570]
+- PCI: qcom: Disable write access to read only registers for IP v2.9.0 (Myron Stowe) [RHEL-2570]
+- PCI: qcom: Use DWC helpers for modifying the read-only DBI registers (Myron Stowe) [RHEL-2570]
+- PCI: qcom: Disable write access to read only registers for IP v2.3.3 (Myron Stowe) [RHEL-2570]
+- PCI: ftpci100: Release the clock resources (Myron Stowe) [RHEL-2570]
+- PCI: imx6: Save and restore root port MSI control in suspend and resume (Myron Stowe) [RHEL-2570]
+- PCI: cadence: Fix Gen2 Link Retraining process (Myron Stowe) [RHEL-2570]
+- dt-bindings: PCI: qcom: Add SDX65 SoC (Myron Stowe) [RHEL-2570]
+- Documentation: PCI: correct spelling (Myron Stowe) [RHEL-2570]
+- PCI: Add pci_clear_master() stub for non-CONFIG_PCI (Myron Stowe) [RHEL-2570]
+- PCI: Expand comment about sorting pci_ids.h entries (Myron Stowe) [RHEL-2570]
+- PCI: Add function 1 DMA alias quirk for Marvell 88SE9235 (Myron Stowe) [RHEL-2570]
+- PCI: Delay after FLR of Solidigm P44 Pro NVMe (Myron Stowe) [RHEL-2570]
+- PCI: Release resource invalidated by coalescing (Myron Stowe) [RHEL-2570]
+- PCI/ACPI: Call _REG when transitioning D-states (Myron Stowe) [RHEL-2570]
+- PCI/ACPI: Validate acpi_pci_set_power_state() parameter (Myron Stowe) [RHEL-2570]
+- PCI/PM: Avoid putting EloPOS E2/S2/H2 PCIe Ports in D3cold (Myron Stowe) [RHEL-2570]
+- PCI/PM: Shorten pci_bridge_wait_for_secondary_bus() wait time for slow links (Myron Stowe) [RHEL-2570]
+- PCI: acpiphp: Reassign resources on bridge if necessary (Myron Stowe) [RHEL-2570]
+- PCI: pciehp: Cancel bringup sequence if card is not present (Myron Stowe) [RHEL-2570]
+- PCI: pciehp: Simplify Attention Button logging (Myron Stowe) [RHEL-2570]
+- Merge branch 'pci/enumeration' (Myron Stowe) [RHEL-2570]
+- PCI: Add failed link recovery for device reset events (Myron Stowe) [RHEL-2570]
+- PCI: Work around PCIe link training failures (Myron Stowe) [RHEL-2570]
+- PCI: Use pcie_wait_for_link_status() in pcie_wait_for_link_delay() (Myron Stowe) [RHEL-2570]
+- PCI: Add support for polling DLLLA to pcie_retrain_link() (Myron Stowe) [RHEL-2570]
+- PCI: Export pcie_retrain_link() for use outside ASPM (Myron Stowe) [RHEL-2570]
+- PCI: Export PCIe link retrain timeout (Myron Stowe) [RHEL-2570]
+- PCI: Execute quirk_enable_clear_retrain_link() earlier (Myron Stowe) [RHEL-2570]
+- PCI/ASPM: Factor out waiting for link training to complete (Myron Stowe) [RHEL-2570]
+- PCI/ASPM: Avoid unnecessary pcie_link_state use (Myron Stowe) [RHEL-2570]
+- PCI/ASPM: Use distinct local vars in pcie_retrain_link() (Myron Stowe) [RHEL-2570]
+- net/mlx5: Rely on dev->link_active_reporting (Myron Stowe) [RHEL-2570]
+- powerpc/eeh: Rely on dev->link_active_reporting (Myron Stowe) [RHEL-2570]
+- PCI: pciehp: Rely on dev->link_active_reporting (Myron Stowe) [RHEL-2570]
+- PCI: Initialize dev->link_active_reporting earlier (Myron Stowe) [RHEL-2570]
+- PCI: of: Propagate firmware node by calling device_set_node() (Myron Stowe) [RHEL-2570]
+- PCI: Add PCI_EXT_CAP_ID_PL_32GT define (Myron Stowe) [RHEL-2570]
+- PCI/ASPM: Remove unnecessary ASPM_STATE_L1SS check (Myron Stowe) [RHEL-2570]
+- PCI/ASPM: Rename L1.2-specific functions from 'l1ss' to 'l12' (Myron Stowe) [RHEL-2570]
+- PCI/ASPM: Set ASPM_STATE_L1 when driver enables L1.1 or L1.2 (Myron Stowe) [RHEL-2570]
+- PCI/ASPM: Set only ASPM_STATE_L1 when driver enables L1 (Myron Stowe) [RHEL-2570]
+- PCI/ASPM: Disable only ASPM_STATE_L1 when driver disables L1 (Myron Stowe) [RHEL-2570]
+- PCI/ASPM: Disable ASPM on MFD function removal to avoid use-after-free (Myron Stowe) [RHEL-2570]
+- Documentation: PCI: Tidy AER documentation (Myron Stowe) [RHEL-2570]
+- Documentation: PCI: Update cross references to .rst files (Myron Stowe) [RHEL-2570]
+- Documentation: PCI: Drop recommendation to configure AER Capability (Myron Stowe) [RHEL-2570]
+- PCI: Unexport pci_save_aer_state() (Myron Stowe) [RHEL-2570]
+- cpufreq: Fail driver register if it has adjust_perf without fast_switch (David Arcari) [RHEL-10047]
+- cpufreq: amd-pstate-ut: Fix kernel panic when loading the driver (David Arcari) [RHEL-10047]
+- cpufreq: amd-pstate-ut: Remove module parameter access (David Arcari) [RHEL-10047]
+- cpufreq: amd-pstate-ut: Modify the function to get the highest_perf value (David Arcari) [RHEL-10047]
+- cpufreq: amd-pstate: fix global sysfs attribute type (David Arcari) [RHEL-10047]
+- redhat/configs: set the default for amd-pstate to Active (EPP) (David Arcari) [RHEL-10047]
+- cpufreq: amd-pstate: Add a kernel config option to set default mode (David Arcari) [RHEL-10047]
+- cpufreq: amd-pstate: Set a fallback policy based on preferred_profile (David Arcari) [RHEL-10047]
+- ACPI: CPPC: Add definition for undefined FADT preferred PM profile value (David Arcari) [RHEL-10047]
+- cpufreq: amd-pstate: Make amd-pstate EPP driver name hyphenated (David Arcari) [RHEL-10047]
+- cpufreq: amd-pstate: Write CPPC enable bit per-socket (David Arcari) [RHEL-10047]
+- cpufreq: amd-pstate: move to use bus_get_dev_root() (David Arcari) [RHEL-10047]
+- vfio/group: Defer device removal from no-iommu group (Alex Williamson) [RHEL-3400]
+- cpupower: Add Georgian translation to Makefile LANGUAGES (Joel Slebodnick) [RHEL-10052]
+- cpupower: Fix cpuidle_set to accept only numeric values for idle-set operation. (Joel Slebodnick) [RHEL-10052]
+- cpupower: Add turbo-boost support in cpupower (Joel Slebodnick) [RHEL-10052]
+- cpupower: Add support for amd_pstate mode change (Joel Slebodnick) [RHEL-10052]
+- cpupower: Add EPP value change support (Joel Slebodnick) [RHEL-10052]
+- cpupower: Add is_valid_path API (Joel Slebodnick) [RHEL-10052]
+- cpupower: Recognise amd-pstate active mode driver (Joel Slebodnick) [RHEL-10052]
+- redhat: bump libcpupower soname to match upstream (Joel Slebodnick) [RHEL-10052]
+- cpupower: Bump soname version (Joel Slebodnick) [RHEL-10052]
+- cpupower: Make TSC read per CPU for Mperf monitor (Joel Slebodnick) [RHEL-10052]
+- cpupower:Fix resource leaks in sysfs_get_enabled() (Joel Slebodnick) [RHEL-10052]
+- cpupower: rapl monitor - shows the used power consumption in uj for each rapl domain (Joel Slebodnick) [RHEL-10052]
+- cpupower: Introduce powercap intel-rapl library and powercap-info command (Joel Slebodnick) [RHEL-10052]
+- cpupower: Add Georgian translation (Joel Slebodnick) [RHEL-10052]
+- tools/cpupower: Choose base_cpu to display default cpupower details (Joel Slebodnick) [RHEL-10052]
+- treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE (Joel Slebodnick) [RHEL-10052]
+- Revert "cnic: don't pass bogus GFP_ flags to dma_alloc_coherent" (Chris Leech) [RHEL-2542]
+- Revert "dma-mapping: reject __GFP_COMP in dma_alloc_attrs" (Chris Leech) [RHEL-2542]
+- drm/amd: flush any delayed gfxoff on suspend entry (Mika Penttilä) [2232662]
+- drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix (Mika Penttilä) [2232662]
+- drm/amd/pm: skip the RLC stop when S0i3 suspend for SMU v13.0.4/11 (Mika Penttilä) [2232662]
+- Revert "net/mlx5e: Switch to using napi_build_skb()" (Mohammad Kabat) [RHEL-1267]
+
 * Tue Oct 03 2023 Scott Weaver <scweaver@redhat.com> [5.14.0-372.el9]
 - x86/xen: Set default memory type for PV guests to WB (Camilla Conte) [RHEL-2889]
 - x86/mtrr: Unify debugging printing (Camilla Conte) [RHEL-2889]
--- a/6
+++ b/6
@ -1,3 +1,3 @@
-SHA512 (linux-5.14.0-372.el9.tar.xz) = 9e0daac6e74ee3d25d1d81f02a1d0079924d5cc0bc0a7619cf71fcd6b3eee17ad184c92075318d7d3e1b599f5b8fc8a087c78b1f6b4f13425500c04b4255dc54
-SHA512 (kernel-abi-stablelists-5.14.0-372.el9.tar.bz2) = 5633569e82923bb6c76e259af89ca7a31ec190c3290a1b90777599ea3661ecce8dbe7b3ace83190d7d6ac130fe593a9eeb455af023987c243c7fb5f6fdc93cbb
-SHA512 (kernel-kabi-dw-5.14.0-372.el9.tar.bz2) = b76ac6c97e0a06201fdf08498b70e569cb276c475668c9cbf64496dfa2f7080fe8b1d86198458b2a977f6dac3ec08209f89a078abcc7b0f741d4d719d111505e
+SHA512 (linux-5.14.0-373.el9.tar.xz) = c1584c0d5cead8ba660bc5a6a730a5d902ec6e5edf39c159e792796ec626e9d354a71f8edb569af2e9b39079508dc0432ab7d9a3a6fc69e2159798b5b6765ac7
+SHA512 (kernel-abi-stablelists-5.14.0-373.el9.tar.bz2) = 1dd7b98543d9e65bf91c9d70c69afa6da57d3d455b78e5f12d8518c68869c47f1fe02ae366e83aec8c008a99fb3046f27120b7b290c573d4266dd829bb27a647
+SHA512 (kernel-kabi-dw-5.14.0-373.el9.tar.bz2) = b76ac6c97e0a06201fdf08498b70e569cb276c475668c9cbf64496dfa2f7080fe8b1d86198458b2a977f6dac3ec08209f89a078abcc7b0f741d4d719d111505e