6e58cbb003
* Tue May 30 2023 Jan Stancek <jstancek@redhat.com> [5.14.0-320.el9] - redhat/configs: add missing Qualcomm USB PHY configs (Adrien Thierry) [2208304] - arm64: dts: qcom: sa8775p-ride: enable USB nodes (Adrien Thierry) [2208304] - arm64: dts: qcom: sa8775p: add USB nodes (Adrien Thierry) [2208304] - arm64: dts: qcom: sa8775p: pmic: add the sdam_0 node (Adrien Thierry) [2208304] - arm64: dts: qcom: sa8775p: pmic: remove the PON modes (Adrien Thierry) [2208304] - phy: qcom-qmp: Add SA8775P USB3 UNI phy (Adrien Thierry) [2208304] - phy: qualcomm: phy-qcom-qmp-ufs: add definitions for sa8775p (Adrien Thierry) [2208304] - pinctrl: qcom: spmi-gpio: add support for pmm8654au-gpio (Adrien Thierry) [2208304] - phy: qcom-qmp-pcie: drop sdm845_qhp_pcie_rx_tbl (Adrien Thierry) [2208304] - phy: qcom-qmp-pcie: sc8180x PCIe PHY has 2 lanes (Adrien Thierry) [2208304] - arm64: dts: qcom: sa8775p-ride: add PMIC regulators (Adrien Thierry) [2208304] - regulator: qcom-rpmh: add support for pmm8654au regulators (Adrien Thierry) [2208304] - arm64: dts: qcom: sa8775p-ride: set gpio-line-names for PMIC GPIOs (Adrien Thierry) [2208304] - arm64: dts: qcom: sa8775p: add PMIC GPIO controller nodes (Adrien Thierry) [2208304] - arm64: dts: qcom: sa8775p: pmic: add thermal zones (Adrien Thierry) [2208304] - arm64: dts: qcom: sa8775p: pmic: add support for the pmm8654 RESIN input (Adrien Thierry) [2208304] - arm64: dts: qcom: sa8775p: pmic: add the power key (Adrien Thierry) [2208304] - arm64: dts: qcom: sa8775p: add the Power On device node (Adrien Thierry) [2208304] - arm64: dts: qcom: sa8775p: add support for the on-board PMICs (Adrien Thierry) [2208304] - arm64: dts: qcom: sa8775p: add the spmi node (Adrien Thierry) [2208304] - arm64: dts: qcom: sa8775p: add the pdc node (Adrien Thierry) [2208304] - arm64: dts: qcom: sa8775p: sort soc nodes by reg property (Adrien Thierry) [2208304] - arm64: dts: qcom: sa8775p: pad reg properties to 8 digits (Adrien Thierry) [2208304] - phy: qcom-qmp-ufs: Add SM7150 support (Adrien Thierry) [2208304] - phy: qcom-qmp: Add support for SDX65 QMP PCIe PHY (Adrien Thierry) [2208304] - phy: qcom-qmp-combo: use qmp_combo_offsets_v3 instead of _v6 (Adrien Thierry) [2208304] - phy: qcom-qmp-combo: fix v3 offsets table (Adrien Thierry) [2208304] - phy: qualcomm: phy-qcom-ipq806x-sata: Convert to platform remove callback returning void (Adrien Thierry) [2208304] - phy: qualcomm: phy-qcom-eusb2-repeater: Convert to platform remove callback returning void (Adrien Thierry) [2208304] - phy: qualcomm: phy-qcom-apq8064-sata: Convert to platform remove callback returning void (Adrien Thierry) [2208304] - phy: qcom-qmp-pcie: Add RC init sequence for SDX55 (Adrien Thierry) [2208304] - phy: qcom-qmp-pcie: Split out EP related init sequence for SDX55 (Adrien Thierry) [2208304] - phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater (Adrien Thierry) [2208304] - phy: qcom: Add QCOM SNPS eUSB2 repeater driver (Adrien Thierry) [2208304] - phy: qcom: snps-eusb2: Add missing headers (Adrien Thierry) [2208304] - phy: qcom-qmp-combo: Add support for SM8550 (Adrien Thierry) [2208304] - phy: qcom-qmp: Add v6 DP register offsets (Adrien Thierry) [2208304] - phy: qcom-qmp: pcs-usb: Add v6 register offsets (Adrien Thierry) [2208304] - phy: qcom: Add QCOM SNPS eUSB2 driver (Adrien Thierry) [2208304] - phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs (Adrien Thierry) [2208304] - phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets (Adrien Thierry) [2208304] - phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets (Adrien Thierry) [2208304] - phy: qcom-qmp: pcs-pcie: Add v6.20 register offsets (Adrien Thierry) [2208304] - phy: qcom-qmp: pcs-pcie: Add v6 register offsets (Adrien Thierry) [2208304] - phy: qcom-qmp: pcs: Add v6.20 register offsets (Adrien Thierry) [2208304] - phy: qcom-qmp: pcs: Add v6 register offsets (Adrien Thierry) [2208304] - phy: qcom: com-qmp-combo: add SM8350 & SM8450 support (Adrien Thierry) [2208304] - phy: qcom-qmp: Introduce Kconfig symbols for discrete drivers (Adrien Thierry) [2208304] - phy: qcom-qmp-combo: Add config for SM6350 (Adrien Thierry) [2208304] - phy: qcom-qmp-ufs: Add SM8550 support (Adrien Thierry) [2208304] - phy: qcom-qmp: pcs-ufs: Add v6 register offsets (Adrien Thierry) [2208304] - phy: qcom-qmp: qserdes-txrx-ufs: Add v6 register offsets (Adrien Thierry) [2208304] - phy: qcom-qmp: qserdes-txrx: Add v6 register offsets (Adrien Thierry) [2208304] - phy: qcom-qmp: qserdes-com: Add v6 register offsets (Adrien Thierry) [2208304] - phy: qcom-qmp-usb: fix the regs layout table for sdx65 uniphy PHY (Adrien Thierry) [2208304] - phy: qcom-qmp-pcie: fix the regs layout table for sm8450 gen3x1 PHY (Adrien Thierry) [2208304] - phy: qcom-qmp-combo: rework regs layout arrays (Adrien Thierry) [2208304] - phy: qcom-qmp-combo: remove QPHY_PCS_LFPS_RXTERM_IRQ_STATUS reg (Adrien Thierry) [2208304] - phy: qualcomm: qmp-ufs: rename qmp_ufs_offsets_v5 to qmp_ufs_offsets (Adrien Thierry) [2208304] - phy: qcom-qmp-ufs: Add HS G4 mode support to SC8280XP SoC (Adrien Thierry) [2208304] - phy: qcom-qmp-ufs: Add HS G4 mode support to SM8450 SoC (Adrien Thierry) [2208304] - phy: qcom-qmp-ufs: Add HS G4 mode support to SM8350 SoC (Adrien Thierry) [2208304] - phy: qcom-qmp-ufs: Avoid setting HS G3 specific registers (Adrien Thierry) [2208304] - phy: qcom-qmp-ufs: Add HS G4 mode support to SM8250 SoC (Adrien Thierry) [2208304] - phy: qcom-qmp-ufs: Add HS G4 mode support to SM8150 SoC (Adrien Thierry) [2208304] - phy: qcom-qmp-ufs: Move HS Rate B register setting to tbls_hs_b (Adrien Thierry) [2208304] - phy: qcom-qmp-ufs: Add support for configuring PHY in HS G4 mode (Adrien Thierry) [2208304] - phy: qcom-qmp-ufs: Add support for configuring PHY in HS Series B mode (Adrien Thierry) [2208304] - phy: qcom-qmp-ufs: Move register settings to qmp_phy_cfg_tbls struct (Adrien Thierry) [2208304] - phy: qcom-qmp-ufs: Rename MSM8996 PHY definitions (Adrien Thierry) [2208304] - phy: qcom-qmp-ufs: Remove _tbl suffix from qmp_phy_init_tbl definitions (Adrien Thierry) [2208304] - phy: qcom-qmp: Add SM6125 UFS PHY support (Adrien Thierry) [2208304] - phy: Revert "phy: qualcomm: usb28nm: Add MDM9607 init sequence" (Adrien Thierry) [2208304] - phy: qcom-qmp-usb: Add Qualcomm SM6115 / SM4250 USB3 PHY support (Adrien Thierry) [2208304] - phy: qcom-qmp-usb: Fix QSERDES_V3_RX_UCDR_PI_CONTROLS init val (Adrien Thierry) [2208304] - phy: qcom-qmp: move type-specific headers to particular driver (Adrien Thierry) [2208304] - phy: qcom-qmp-usb: fix regs layout arrays (Adrien Thierry) [2208304] - phy: qcom-qmp-usb: rework regs layout arrays (Adrien Thierry) [2208304] - phy: qcom-qmp-usb: remove QPHY_PCS_MISC_TYPEC_CTRL reg (Adrien Thierry) [2208304] - phy: qcom-qmp-usb: remove QPHY_PCS_LFPS_RXTERM_IRQ_STATUS reg (Adrien Thierry) [2208304] - phy: qcom-qmp-ufs: rename regs layout arrays (Adrien Thierry) [2208304] - phy: qcom-qmp-ufs: rework regs layout arrays (Adrien Thierry) [2208304] - phy: qcom-qmp-ufs: split UFS-specific v2 PCS registers to a separate header (Adrien Thierry) [2208304] - phy: qcom-qmp-pcie-msm8996: rework regs layout arrays (Adrien Thierry) [2208304] - phy: qcom-qmp-pcie: rename regs layout arrays (Adrien Thierry) [2208304] - phy: qcom-qmp-pcie: rework regs layout arrays (Adrien Thierry) [2208304] - phy: qcom-qmp: remove duplicate v5_5nm register definitions (Adrien Thierry) [2208304] - phy: qcom-qmp: fix typo in QSERDES_COM_CMN_RSVD5 value (Adrien Thierry) [2208304] - phy: qcom-qmp-ufs: provide symbol clocks (Adrien Thierry) [2208304] - phy: qualcomm: pcie2: register as clock provider (Adrien Thierry) [2208304] - phy: qcom-qmp-pcie: add support for sm8350 platform (Adrien Thierry) [2208304] - phy: qcom-qmp-pcie: rename the sm8450 gen3 PHY config tables (Adrien Thierry) [2208304] - phy: qcom-qmp-pcie: split sm8450 gen3 PHY config tables (Adrien Thierry) [2208304] - clk: fixed-rate: add devm_clk_hw_register_fixed_rate (Adrien Thierry) [2208304] - clk: asm9260: use parent index to link the reference clock (Adrien Thierry) [2208304] - netfilter: nf_dup_netdev: add and use recursion counter (Eric Garver) [1724795] - netfilter: nf_dup_netdev: do not push mac header a second time (Eric Garver) [1724795] - netfilter: egress: silence egress hook lockdep splats (Eric Garver) [1724795] - netfilter: nft_fwd_netdev: Support egress hook (Eric Garver) [1724795] - netfilter: nft_meta: add NFT_META_IFTYPE (Eric Garver) [1724795] - selftests/bpf: Do not use sign-file as testcase (Alex Gladkov) [2184616] - x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK (Oleg Nesterov) [2190456] - kexec: remove unnecessary arch_kexec_kernel_image_load() (Baoquan He) [RHEL-517] - x86/kexec: remove unnecessary arch_kexec_kernel_image_load() (Baoquan He) [RHEL-517] - netlabel: fix out-of-bounds memory accesses (Juraj Marcin) [2181134] - lsm: Clarify documentation of vm_enough_memory hook (Juraj Marcin) [2181134] - lsm,fs: fix vfs_getxattr_alloc() return type and caller error paths (Juraj Marcin) [2181134] - LSM: Better reporting of actual LSMs at boot (Juraj Marcin) [2181134] - selinux: remove the sidtab context conversion indirect calls (Juraj Marcin) [2181134] - audit: Fix some kernel-doc warnings (Juraj Marcin) [2181134] - lsm: remove obsoleted comments for security hooks (Juraj Marcin) [2181134] - selinux: enable use of both GFP_KERNEL and GFP_ATOMIC in convert_context() (Juraj Marcin) [2181134] - selinux: remove the unneeded result variable (Juraj Marcin) [2181134] - ->getprocattr(): attribute name is const char *, TYVM... (Juraj Marcin) [2181134] - selinux: declare read-only parameters const (Juraj Marcin) [2181134] - selinux: use int arrays for boolean values (Juraj Marcin) [2181134] - selinux: remove an unneeded variable in sel_make_class_dir_entries() (Juraj Marcin) [2181134] - security: pass down mount idmapping to setattr hook (Juraj Marcin) [2181134] - selinux: selinux_add_opt() callers free memory (Juraj Marcin) [2181134] - selinux: Add boundary check in put_entry() (Juraj Marcin) [2181134] - selinux: fix memleak in security_read_state_kernel() (Juraj Marcin) [2181134] - selinux: fix typos in comments (Juraj Marcin) [2181134] - selinux: drop unnecessary NULL check (Juraj Marcin) [2181134] - selinux: add __randomize_layout to selinux_audit_data (Juraj Marcin) [2181134] - selinux: free contexts previously transferred in selinux_add_opt() (Juraj Marcin) [2181134 2187402] - security: declare member holding string literal const (Juraj Marcin) [2181134] - selinux: fix indentation level of mls_ops block (Juraj Marcin) [2181134] - selinux: include necessary headers in headers (Juraj Marcin) [2181134] - selinux: avoid extra semicolon (Juraj Marcin) [2181134] - selinux: update parameter documentation (Juraj Marcin) [2181134] - selinux: resolve checkpatch errors (Juraj Marcin) [2181134] - security: don't treat structure as an array of struct hlist_head (Juraj Marcin) [2181134] - selinux: Remove redundant assignments (Juraj Marcin) [2181134] - selinux: fix bad cleanup on error in hashtab_duplicate() (Juraj Marcin) [2181134] - tipc: check the bearer min mtu properly when setting it by netlink (Xin Long) [2185140] - tipc: do not update mtu if msg_max is too small in mtu negotiation (Xin Long) [2185140] - tipc: add tipc_bearer_min_mtu to calculate min mtu (Xin Long) [2185140] Resolves: rhbz#1724795, rhbz#2181134, rhbz#2184616, rhbz#2185140, rhbz#2187402, rhbz#2190456, rhbz#2208304, RHEL-517 Signed-off-by: Jan Stancek <jstancek@redhat.com>
68 lines
2.3 KiB
Makefile
68 lines
2.3 KiB
Makefile
RHEL_MAJOR = 9
|
|
RHEL_MINOR = 3
|
|
|
|
#
|
|
# RHEL_RELEASE
|
|
# -------------
|
|
#
|
|
# Represents build number in 'release' part of RPM's name-version-release.
|
|
# name is <package_name>, e.g. kernel
|
|
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
|
|
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
RHEL_RELEASE = 320
|
|
|
|
#
|
|
# ZSTREAM
|
|
# -------
|
|
#
|
|
# This variable controls whether we use zstream numbering or not for the
|
|
# package release. The zstream release keeps the build number of the last
|
|
# build done for ystream for the Beta milestone, and increments a second
|
|
# number for each build. The third number is used for branched builds
|
|
# (eg.: for builds with security fixes or hot fixes done outside of the
|
|
# batch release process).
|
|
#
|
|
# For example, with ZSTREAM unset or set to "no", all builds will contain
|
|
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
|
|
# where X is the build number. With ZSTREAM set to "yes", we will have
|
|
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
|
|
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
|
|
# build number and Z will always be 1 except if you're doing a branched build
|
|
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
|
|
# number will be incremented instead of the Y).
|
|
#
|
|
ZSTREAM ?= no
|
|
|
|
#
|
|
# Early y+1 numbering
|
|
# --------------------
|
|
#
|
|
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
|
|
# First is RHEL_RELEASE inherited/merged from y as-is, second number
|
|
# is incremented with each build starting from 1. After merge from y,
|
|
# it resets back to 1. This way y+1 nvr reflects status of last merge.
|
|
#
|
|
# Example:
|
|
#
|
|
# rhel8.0 rhel-8.1
|
|
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
|
|
# kernel-4.18.0-58.2.el8
|
|
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
|
|
# kernel-4.18.0-60.el8
|
|
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
|
|
#
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
EARLY_YSTREAM ?= no
|
|
EARLY_YBUILD:=
|
|
EARLY_YRELEASE:=
|
|
ifneq ("$(ZSTREAM)", "yes")
|
|
ifeq ("$(EARLY_YSTREAM)","yes")
|
|
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
|
|
endif
|
|
endif
|