rpms/kernel
9
2
Fork 4
Code Issues Pull Requests Releases Activity

kernel-5.14.0-320.el9

Browse Source 
* Tue May 30 2023 Jan Stancek <jstancek@redhat.com> [5.14.0-320.el9]
- redhat/configs: add missing Qualcomm USB PHY configs (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p-ride: enable USB nodes (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: add USB nodes (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: pmic: add the sdam_0 node (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: pmic: remove the PON modes (Adrien Thierry) [2208304]
- phy: qcom-qmp: Add SA8775P USB3 UNI phy (Adrien Thierry) [2208304]
- phy: qualcomm: phy-qcom-qmp-ufs: add definitions for sa8775p (Adrien Thierry) [2208304]
- pinctrl: qcom: spmi-gpio: add support for pmm8654au-gpio (Adrien Thierry) [2208304]
- phy: qcom-qmp-pcie: drop sdm845_qhp_pcie_rx_tbl (Adrien Thierry) [2208304]
- phy: qcom-qmp-pcie: sc8180x PCIe PHY has 2 lanes (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p-ride: add PMIC regulators (Adrien Thierry) [2208304]
- regulator: qcom-rpmh: add support for pmm8654au regulators (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p-ride: set gpio-line-names for PMIC GPIOs (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: add PMIC GPIO controller nodes (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: pmic: add thermal zones (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: pmic: add support for the pmm8654 RESIN input (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: pmic: add the power key (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: add the Power On device node (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: add support for the on-board PMICs (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: add the spmi node (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: add the pdc node (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: sort soc nodes by reg property (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: pad reg properties to 8 digits (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Add SM7150 support (Adrien Thierry) [2208304]
- phy: qcom-qmp: Add support for SDX65 QMP PCIe PHY (Adrien Thierry) [2208304]
- phy: qcom-qmp-combo: use qmp_combo_offsets_v3 instead of _v6 (Adrien Thierry) [2208304]
- phy: qcom-qmp-combo: fix v3 offsets table (Adrien Thierry) [2208304]
- phy: qualcomm: phy-qcom-ipq806x-sata: Convert to platform remove callback returning void (Adrien Thierry) [2208304]
- phy: qualcomm: phy-qcom-eusb2-repeater: Convert to platform remove callback returning void (Adrien Thierry) [2208304]
- phy: qualcomm: phy-qcom-apq8064-sata: Convert to platform remove callback returning void (Adrien Thierry) [2208304]
- phy: qcom-qmp-pcie: Add RC init sequence for SDX55 (Adrien Thierry) [2208304]
- phy: qcom-qmp-pcie: Split out EP related init sequence for SDX55 (Adrien Thierry) [2208304]
- phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater (Adrien Thierry) [2208304]
- phy: qcom: Add QCOM SNPS eUSB2 repeater driver (Adrien Thierry) [2208304]
- phy: qcom: snps-eusb2: Add missing headers (Adrien Thierry) [2208304]
- phy: qcom-qmp-combo: Add support for SM8550 (Adrien Thierry) [2208304]
- phy: qcom-qmp: Add v6 DP register offsets (Adrien Thierry) [2208304]
- phy: qcom-qmp: pcs-usb: Add v6 register offsets (Adrien Thierry) [2208304]
- phy: qcom: Add QCOM SNPS eUSB2 driver (Adrien Thierry) [2208304]
- phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs (Adrien Thierry) [2208304]
- phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets (Adrien Thierry) [2208304]
- phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets (Adrien Thierry) [2208304]
- phy: qcom-qmp: pcs-pcie: Add v6.20 register offsets (Adrien Thierry) [2208304]
- phy: qcom-qmp: pcs-pcie: Add v6 register offsets (Adrien Thierry) [2208304]
- phy: qcom-qmp: pcs: Add v6.20 register offsets (Adrien Thierry) [2208304]
- phy: qcom-qmp: pcs: Add v6 register offsets (Adrien Thierry) [2208304]
- phy: qcom: com-qmp-combo: add SM8350 & SM8450 support (Adrien Thierry) [2208304]
- phy: qcom-qmp: Introduce Kconfig symbols for discrete drivers (Adrien Thierry) [2208304]
- phy: qcom-qmp-combo: Add config for SM6350 (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Add SM8550 support (Adrien Thierry) [2208304]
- phy: qcom-qmp: pcs-ufs: Add v6 register offsets (Adrien Thierry) [2208304]
- phy: qcom-qmp: qserdes-txrx-ufs: Add v6 register offsets (Adrien Thierry) [2208304]
- phy: qcom-qmp: qserdes-txrx: Add v6 register offsets (Adrien Thierry) [2208304]
- phy: qcom-qmp: qserdes-com: Add v6 register offsets (Adrien Thierry) [2208304]
- phy: qcom-qmp-usb: fix the regs layout table for sdx65 uniphy PHY (Adrien Thierry) [2208304]
- phy: qcom-qmp-pcie: fix the regs layout table for sm8450 gen3x1 PHY (Adrien Thierry) [2208304]
- phy: qcom-qmp-combo: rework regs layout arrays (Adrien Thierry) [2208304]
- phy: qcom-qmp-combo: remove QPHY_PCS_LFPS_RXTERM_IRQ_STATUS reg (Adrien Thierry) [2208304]
- phy: qualcomm: qmp-ufs: rename qmp_ufs_offsets_v5 to qmp_ufs_offsets (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Add HS G4 mode support to SC8280XP SoC (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Add HS G4 mode support to SM8450 SoC (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Add HS G4 mode support to SM8350 SoC (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Avoid setting HS G3 specific registers (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Add HS G4 mode support to SM8250 SoC (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Add HS G4 mode support to SM8150 SoC (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Move HS Rate B register setting to tbls_hs_b (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Add support for configuring PHY in HS G4 mode (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Add support for configuring PHY in HS Series B mode (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Move register settings to qmp_phy_cfg_tbls struct (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Rename MSM8996 PHY definitions (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Remove _tbl suffix from qmp_phy_init_tbl definitions (Adrien Thierry) [2208304]
- phy: qcom-qmp: Add SM6125 UFS PHY support (Adrien Thierry) [2208304]
- phy: Revert "phy: qualcomm: usb28nm: Add MDM9607 init sequence" (Adrien Thierry) [2208304]
- phy: qcom-qmp-usb: Add Qualcomm SM6115 / SM4250 USB3 PHY support (Adrien Thierry) [2208304]
- phy: qcom-qmp-usb: Fix QSERDES_V3_RX_UCDR_PI_CONTROLS init val (Adrien Thierry) [2208304]
- phy: qcom-qmp: move type-specific headers to particular driver (Adrien Thierry) [2208304]
- phy: qcom-qmp-usb: fix regs layout arrays (Adrien Thierry) [2208304]
- phy: qcom-qmp-usb: rework regs layout arrays (Adrien Thierry) [2208304]
- phy: qcom-qmp-usb: remove QPHY_PCS_MISC_TYPEC_CTRL reg (Adrien Thierry) [2208304]
- phy: qcom-qmp-usb: remove QPHY_PCS_LFPS_RXTERM_IRQ_STATUS reg (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: rename regs layout arrays (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: rework regs layout arrays (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: split UFS-specific v2 PCS registers to a separate header (Adrien Thierry) [2208304]
- phy: qcom-qmp-pcie-msm8996: rework regs layout arrays (Adrien Thierry) [2208304]
- phy: qcom-qmp-pcie: rename regs layout arrays (Adrien Thierry) [2208304]
- phy: qcom-qmp-pcie: rework regs layout arrays (Adrien Thierry) [2208304]
- phy: qcom-qmp: remove duplicate v5_5nm register definitions (Adrien Thierry) [2208304]
- phy: qcom-qmp: fix typo in QSERDES_COM_CMN_RSVD5 value (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: provide symbol clocks (Adrien Thierry) [2208304]
- phy: qualcomm: pcie2: register as clock provider (Adrien Thierry) [2208304]
- phy: qcom-qmp-pcie: add support for sm8350 platform (Adrien Thierry) [2208304]
- phy: qcom-qmp-pcie: rename the sm8450 gen3 PHY config tables (Adrien Thierry) [2208304]
- phy: qcom-qmp-pcie: split sm8450 gen3 PHY config tables (Adrien Thierry) [2208304]
- clk: fixed-rate: add devm_clk_hw_register_fixed_rate (Adrien Thierry) [2208304]
- clk: asm9260: use parent index to link the reference clock (Adrien Thierry) [2208304]
- netfilter: nf_dup_netdev: add and use recursion counter (Eric Garver) [1724795]
- netfilter: nf_dup_netdev: do not push mac header a second time (Eric Garver) [1724795]
- netfilter: egress: silence egress hook lockdep splats (Eric Garver) [1724795]
- netfilter: nft_fwd_netdev: Support egress hook (Eric Garver) [1724795]
- netfilter: nft_meta: add NFT_META_IFTYPE (Eric Garver) [1724795]
- selftests/bpf: Do not use sign-file as testcase (Alex Gladkov) [2184616]
- x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK (Oleg Nesterov) [2190456]
- kexec: remove unnecessary arch_kexec_kernel_image_load() (Baoquan He) [RHEL-517]
- x86/kexec: remove unnecessary arch_kexec_kernel_image_load() (Baoquan He) [RHEL-517]
- netlabel: fix out-of-bounds memory accesses (Juraj Marcin) [2181134]
- lsm: Clarify documentation of vm_enough_memory hook (Juraj Marcin) [2181134]
- lsm,fs: fix vfs_getxattr_alloc() return type and caller error paths (Juraj Marcin) [2181134]
- LSM: Better reporting of actual LSMs at boot (Juraj Marcin) [2181134]
- selinux: remove the sidtab context conversion indirect calls (Juraj Marcin) [2181134]
- audit: Fix some kernel-doc warnings (Juraj Marcin) [2181134]
- lsm: remove obsoleted comments for security hooks (Juraj Marcin) [2181134]
- selinux: enable use of both GFP_KERNEL and GFP_ATOMIC in convert_context() (Juraj Marcin) [2181134]
- selinux: remove the unneeded result variable (Juraj Marcin) [2181134]
- ->getprocattr(): attribute name is const char *, TYVM... (Juraj Marcin) [2181134]
- selinux: declare read-only parameters const (Juraj Marcin) [2181134]
- selinux: use int arrays for boolean values (Juraj Marcin) [2181134]
- selinux: remove an unneeded variable in sel_make_class_dir_entries() (Juraj Marcin) [2181134]
- security: pass down mount idmapping to setattr hook (Juraj Marcin) [2181134]
- selinux: selinux_add_opt() callers free memory (Juraj Marcin) [2181134]
- selinux: Add boundary check in put_entry() (Juraj Marcin) [2181134]
- selinux: fix memleak in security_read_state_kernel() (Juraj Marcin) [2181134]
- selinux: fix typos in comments (Juraj Marcin) [2181134]
- selinux: drop unnecessary NULL check (Juraj Marcin) [2181134]
- selinux: add __randomize_layout to selinux_audit_data (Juraj Marcin) [2181134]
- selinux: free contexts previously transferred in selinux_add_opt() (Juraj Marcin) [2181134 2187402]
- security: declare member holding string literal const (Juraj Marcin) [2181134]
- selinux: fix indentation level of mls_ops block (Juraj Marcin) [2181134]
- selinux: include necessary headers in headers (Juraj Marcin) [2181134]
- selinux: avoid extra semicolon (Juraj Marcin) [2181134]
- selinux: update parameter documentation (Juraj Marcin) [2181134]
- selinux: resolve checkpatch errors (Juraj Marcin) [2181134]
- security: don't treat structure as an array of struct hlist_head (Juraj Marcin) [2181134]
- selinux: Remove redundant assignments (Juraj Marcin) [2181134]
- selinux: fix bad cleanup on error in hashtab_duplicate() (Juraj Marcin) [2181134]
- tipc: check the bearer min mtu properly when setting it by netlink (Xin Long) [2185140]
- tipc: do not update mtu if msg_max is too small in mtu negotiation (Xin Long) [2185140]
- tipc: add tipc_bearer_min_mtu to calculate min mtu (Xin Long) [2185140]
Resolves: rhbz#1724795, rhbz#2181134, rhbz#2184616, rhbz#2185140, rhbz#2187402, rhbz#2190456, rhbz#2208304, RHEL-517

Signed-off-by: Jan Stancek <jstancek@redhat.com>
This commit is contained in:
Jan Stancek 2023-05-30 07:14:47 +02:00
parent f57e433d38
commit 6e58cbb003
18 changed files with 177 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Makefile.rhelver
View File

@ -12,7 +12,7 @@ RHEL_MINOR = 3
#
# Use this spot to avoid future merge conflicts.
# Do not trim this comment.
RHEL_RELEASE = 319
RHEL_RELEASE = 320
#
# ZSTREAM

2
kernel-aarch64-64k-debug-rhel.config
View File

@ -4236,12 +4236,14 @@ CONFIG_PHY_NS2_USB_DRD=y
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_QCOM_APQ8064_SATA is not set
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_EUSB2_REPEATER is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_IPQ806X_SATA is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_QCOM_PCIE2 is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_SNPS_EUSB2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_HSIC is not set
# CONFIG_PHY_QCOM_USB_HS is not set

2
kernel-aarch64-64k-rhel.config
View File

@ -4214,12 +4214,14 @@ CONFIG_PHY_NS2_USB_DRD=y
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_QCOM_APQ8064_SATA is not set
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_EUSB2_REPEATER is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_IPQ806X_SATA is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_QCOM_PCIE2 is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_SNPS_EUSB2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_HSIC is not set
# CONFIG_PHY_QCOM_USB_HS is not set

2
kernel-aarch64-debug-rhel.config
View File

@ -4233,12 +4233,14 @@ CONFIG_PHY_NS2_USB_DRD=y
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_QCOM_APQ8064_SATA is not set
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_EUSB2_REPEATER is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_IPQ806X_SATA is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_QCOM_PCIE2 is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_SNPS_EUSB2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_HSIC is not set
# CONFIG_PHY_QCOM_USB_HS is not set

2
kernel-aarch64-rhel.config
View File

@ -4211,12 +4211,14 @@ CONFIG_PHY_NS2_USB_DRD=y
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_QCOM_APQ8064_SATA is not set
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_EUSB2_REPEATER is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_IPQ806X_SATA is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_QCOM_PCIE2 is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_SNPS_EUSB2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_HSIC is not set
# CONFIG_PHY_QCOM_USB_HS is not set

2
kernel-aarch64-rt-debug-rhel.config
View File

@ -4313,12 +4313,14 @@ CONFIG_PHY_NS2_USB_DRD=y
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_QCOM_APQ8064_SATA is not set
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_EUSB2_REPEATER is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_IPQ806X_SATA is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_QCOM_PCIE2 is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_SNPS_EUSB2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_HSIC is not set
# CONFIG_PHY_QCOM_USB_HS is not set

2
kernel-aarch64-rt-rhel.config
View File

@ -4291,12 +4291,14 @@ CONFIG_PHY_NS2_USB_DRD=y
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_QCOM_APQ8064_SATA is not set
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_EUSB2_REPEATER is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_IPQ806X_SATA is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_QCOM_PCIE2 is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_SNPS_EUSB2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_HSIC is not set
# CONFIG_PHY_QCOM_USB_HS is not set

2
kernel-ppc64le-debug-rhel.config
View File

@ -3859,10 +3859,12 @@ CONFIG_PHYLIB=y
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_EUSB2_REPEATER is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_SNPS_EUSB2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_HSIC is not set
# CONFIG_PHY_QCOM_USB_HS is not set

2
kernel-ppc64le-rhel.config
View File

@ -3839,10 +3839,12 @@ CONFIG_PHYLIB=y
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_EUSB2_REPEATER is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_SNPS_EUSB2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_HSIC is not set
# CONFIG_PHY_QCOM_USB_HS is not set

2
kernel-s390x-debug-rhel.config
View File

@ -3848,10 +3848,12 @@ CONFIG_PHY_BCM_SR_USB=m
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_EUSB2_REPEATER is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_SNPS_EUSB2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_HSIC is not set
# CONFIG_PHY_QCOM_USB_HS is not set

2
kernel-s390x-rhel.config
View File

@ -3828,10 +3828,12 @@ CONFIG_PHY_BCM_SR_USB=m
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_EUSB2_REPEATER is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_SNPS_EUSB2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_HSIC is not set
# CONFIG_PHY_QCOM_USB_HS is not set

2
kernel-s390x-zfcpdump-rhel.config
View File

@ -3843,10 +3843,12 @@ CONFIG_PHY_BCM_SR_USB=m
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_EUSB2_REPEATER is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_SNPS_EUSB2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_HSIC is not set
# CONFIG_PHY_QCOM_USB_HS is not set

2
kernel-x86_64-debug-rhel.config
View File

@ -4061,10 +4061,12 @@ CONFIG_PHYLINK=m
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_EUSB2_REPEATER is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_SNPS_EUSB2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_HSIC is not set
# CONFIG_PHY_QCOM_USB_HS is not set

2
kernel-x86_64-rhel.config
View File

@ -4041,10 +4041,12 @@ CONFIG_PHYLINK=m
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_EUSB2_REPEATER is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_SNPS_EUSB2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_HSIC is not set
# CONFIG_PHY_QCOM_USB_HS is not set

2
kernel-x86_64-rt-debug-rhel.config
View File

@ -4140,10 +4140,12 @@ CONFIG_PHYLINK=m
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_EUSB2_REPEATER is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_SNPS_EUSB2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_HSIC is not set
# CONFIG_PHY_QCOM_USB_HS is not set

2
kernel-x86_64-rt-rhel.config
View File

@ -4120,10 +4120,12 @@ CONFIG_PHYLINK=m
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_EUSB2_REPEATER is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_SNPS_EUSB2 is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_HSIC is not set
# CONFIG_PHY_QCOM_USB_HS is not set

147
kernel.spec
View File

@ -161,15 +161,15 @@ Summary: The Linux kernel
# define buildid .local
%define specversion 5.14.0
%define patchversion 5.14
%define pkgrelease 319
%define pkgrelease 320
%define kversion 5
%define tarfile_release 5.14.0-319.el9
%define tarfile_release 5.14.0-320.el9
# This is needed to do merge window version magic
%define patchlevel 14
# This allows pkg_release to have configurable %%{?dist} tag
%define specrelease 319%{?buildid}%{?dist}
%define specrelease 320%{?buildid}%{?dist}
# This defines the kabi tarball version
%define kabiversion 5.14.0-319.el9
%define kabiversion 5.14.0-320.el9
#
# End of genspec.sh variables
@ -3657,6 +3657,145 @@ fi
#
#
%changelog
* Tue May 30 2023 Jan Stancek <jstancek@redhat.com> [5.14.0-320.el9]
- redhat/configs: add missing Qualcomm USB PHY configs (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p-ride: enable USB nodes (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: add USB nodes (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: pmic: add the sdam_0 node (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: pmic: remove the PON modes (Adrien Thierry) [2208304]
- phy: qcom-qmp: Add SA8775P USB3 UNI phy (Adrien Thierry) [2208304]
- phy: qualcomm: phy-qcom-qmp-ufs: add definitions for sa8775p (Adrien Thierry) [2208304]
- pinctrl: qcom: spmi-gpio: add support for pmm8654au-gpio (Adrien Thierry) [2208304]
- phy: qcom-qmp-pcie: drop sdm845_qhp_pcie_rx_tbl (Adrien Thierry) [2208304]
- phy: qcom-qmp-pcie: sc8180x PCIe PHY has 2 lanes (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p-ride: add PMIC regulators (Adrien Thierry) [2208304]
- regulator: qcom-rpmh: add support for pmm8654au regulators (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p-ride: set gpio-line-names for PMIC GPIOs (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: add PMIC GPIO controller nodes (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: pmic: add thermal zones (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: pmic: add support for the pmm8654 RESIN input (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: pmic: add the power key (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: add the Power On device node (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: add support for the on-board PMICs (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: add the spmi node (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: add the pdc node (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: sort soc nodes by reg property (Adrien Thierry) [2208304]
- arm64: dts: qcom: sa8775p: pad reg properties to 8 digits (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Add SM7150 support (Adrien Thierry) [2208304]
- phy: qcom-qmp: Add support for SDX65 QMP PCIe PHY (Adrien Thierry) [2208304]
- phy: qcom-qmp-combo: use qmp_combo_offsets_v3 instead of _v6 (Adrien Thierry) [2208304]
- phy: qcom-qmp-combo: fix v3 offsets table (Adrien Thierry) [2208304]
- phy: qualcomm: phy-qcom-ipq806x-sata: Convert to platform remove callback returning void (Adrien Thierry) [2208304]
- phy: qualcomm: phy-qcom-eusb2-repeater: Convert to platform remove callback returning void (Adrien Thierry) [2208304]
- phy: qualcomm: phy-qcom-apq8064-sata: Convert to platform remove callback returning void (Adrien Thierry) [2208304]
- phy: qcom-qmp-pcie: Add RC init sequence for SDX55 (Adrien Thierry) [2208304]
- phy: qcom-qmp-pcie: Split out EP related init sequence for SDX55 (Adrien Thierry) [2208304]
- phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater (Adrien Thierry) [2208304]
- phy: qcom: Add QCOM SNPS eUSB2 repeater driver (Adrien Thierry) [2208304]
- phy: qcom: snps-eusb2: Add missing headers (Adrien Thierry) [2208304]
- phy: qcom-qmp-combo: Add support for SM8550 (Adrien Thierry) [2208304]
- phy: qcom-qmp: Add v6 DP register offsets (Adrien Thierry) [2208304]
- phy: qcom-qmp: pcs-usb: Add v6 register offsets (Adrien Thierry) [2208304]
- phy: qcom: Add QCOM SNPS eUSB2 driver (Adrien Thierry) [2208304]
- phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs (Adrien Thierry) [2208304]
- phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets (Adrien Thierry) [2208304]
- phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets (Adrien Thierry) [2208304]
- phy: qcom-qmp: pcs-pcie: Add v6.20 register offsets (Adrien Thierry) [2208304]
- phy: qcom-qmp: pcs-pcie: Add v6 register offsets (Adrien Thierry) [2208304]
- phy: qcom-qmp: pcs: Add v6.20 register offsets (Adrien Thierry) [2208304]
- phy: qcom-qmp: pcs: Add v6 register offsets (Adrien Thierry) [2208304]
- phy: qcom: com-qmp-combo: add SM8350 & SM8450 support (Adrien Thierry) [2208304]
- phy: qcom-qmp: Introduce Kconfig symbols for discrete drivers (Adrien Thierry) [2208304]
- phy: qcom-qmp-combo: Add config for SM6350 (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Add SM8550 support (Adrien Thierry) [2208304]
- phy: qcom-qmp: pcs-ufs: Add v6 register offsets (Adrien Thierry) [2208304]
- phy: qcom-qmp: qserdes-txrx-ufs: Add v6 register offsets (Adrien Thierry) [2208304]
- phy: qcom-qmp: qserdes-txrx: Add v6 register offsets (Adrien Thierry) [2208304]
- phy: qcom-qmp: qserdes-com: Add v6 register offsets (Adrien Thierry) [2208304]
- phy: qcom-qmp-usb: fix the regs layout table for sdx65 uniphy PHY (Adrien Thierry) [2208304]
- phy: qcom-qmp-pcie: fix the regs layout table for sm8450 gen3x1 PHY (Adrien Thierry) [2208304]
- phy: qcom-qmp-combo: rework regs layout arrays (Adrien Thierry) [2208304]
- phy: qcom-qmp-combo: remove QPHY_PCS_LFPS_RXTERM_IRQ_STATUS reg (Adrien Thierry) [2208304]
- phy: qualcomm: qmp-ufs: rename qmp_ufs_offsets_v5 to qmp_ufs_offsets (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Add HS G4 mode support to SC8280XP SoC (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Add HS G4 mode support to SM8450 SoC (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Add HS G4 mode support to SM8350 SoC (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Avoid setting HS G3 specific registers (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Add HS G4 mode support to SM8250 SoC (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Add HS G4 mode support to SM8150 SoC (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Move HS Rate B register setting to tbls_hs_b (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Add support for configuring PHY in HS G4 mode (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Add support for configuring PHY in HS Series B mode (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Move register settings to qmp_phy_cfg_tbls struct (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Rename MSM8996 PHY definitions (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: Remove _tbl suffix from qmp_phy_init_tbl definitions (Adrien Thierry) [2208304]
- phy: qcom-qmp: Add SM6125 UFS PHY support (Adrien Thierry) [2208304]
- phy: Revert "phy: qualcomm: usb28nm: Add MDM9607 init sequence" (Adrien Thierry) [2208304]
- phy: qcom-qmp-usb: Add Qualcomm SM6115 / SM4250 USB3 PHY support (Adrien Thierry) [2208304]
- phy: qcom-qmp-usb: Fix QSERDES_V3_RX_UCDR_PI_CONTROLS init val (Adrien Thierry) [2208304]
- phy: qcom-qmp: move type-specific headers to particular driver (Adrien Thierry) [2208304]
- phy: qcom-qmp-usb: fix regs layout arrays (Adrien Thierry) [2208304]
- phy: qcom-qmp-usb: rework regs layout arrays (Adrien Thierry) [2208304]
- phy: qcom-qmp-usb: remove QPHY_PCS_MISC_TYPEC_CTRL reg (Adrien Thierry) [2208304]
- phy: qcom-qmp-usb: remove QPHY_PCS_LFPS_RXTERM_IRQ_STATUS reg (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: rename regs layout arrays (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: rework regs layout arrays (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: split UFS-specific v2 PCS registers to a separate header (Adrien Thierry) [2208304]
- phy: qcom-qmp-pcie-msm8996: rework regs layout arrays (Adrien Thierry) [2208304]
- phy: qcom-qmp-pcie: rename regs layout arrays (Adrien Thierry) [2208304]
- phy: qcom-qmp-pcie: rework regs layout arrays (Adrien Thierry) [2208304]
- phy: qcom-qmp: remove duplicate v5_5nm register definitions (Adrien Thierry) [2208304]
- phy: qcom-qmp: fix typo in QSERDES_COM_CMN_RSVD5 value (Adrien Thierry) [2208304]
- phy: qcom-qmp-ufs: provide symbol clocks (Adrien Thierry) [2208304]
- phy: qualcomm: pcie2: register as clock provider (Adrien Thierry) [2208304]
- phy: qcom-qmp-pcie: add support for sm8350 platform (Adrien Thierry) [2208304]
- phy: qcom-qmp-pcie: rename the sm8450 gen3 PHY config tables (Adrien Thierry) [2208304]
- phy: qcom-qmp-pcie: split sm8450 gen3 PHY config tables (Adrien Thierry) [2208304]
- clk: fixed-rate: add devm_clk_hw_register_fixed_rate (Adrien Thierry) [2208304]
- clk: asm9260: use parent index to link the reference clock (Adrien Thierry) [2208304]
- netfilter: nf_dup_netdev: add and use recursion counter (Eric Garver) [1724795]
- netfilter: nf_dup_netdev: do not push mac header a second time (Eric Garver) [1724795]
- netfilter: egress: silence egress hook lockdep splats (Eric Garver) [1724795]
- netfilter: nft_fwd_netdev: Support egress hook (Eric Garver) [1724795]
- netfilter: nft_meta: add NFT_META_IFTYPE (Eric Garver) [1724795]
- selftests/bpf: Do not use sign-file as testcase (Alex Gladkov) [2184616]
- x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK (Oleg Nesterov) [2190456]
- kexec: remove unnecessary arch_kexec_kernel_image_load() (Baoquan He) [RHEL-517]
- x86/kexec: remove unnecessary arch_kexec_kernel_image_load() (Baoquan He) [RHEL-517]
- netlabel: fix out-of-bounds memory accesses (Juraj Marcin) [2181134]
- lsm: Clarify documentation of vm_enough_memory hook (Juraj Marcin) [2181134]
- lsm,fs: fix vfs_getxattr_alloc() return type and caller error paths (Juraj Marcin) [2181134]
- LSM: Better reporting of actual LSMs at boot (Juraj Marcin) [2181134]
- selinux: remove the sidtab context conversion indirect calls (Juraj Marcin) [2181134]
- audit: Fix some kernel-doc warnings (Juraj Marcin) [2181134]
- lsm: remove obsoleted comments for security hooks (Juraj Marcin) [2181134]
- selinux: enable use of both GFP_KERNEL and GFP_ATOMIC in convert_context() (Juraj Marcin) [2181134]
- selinux: remove the unneeded result variable (Juraj Marcin) [2181134]
- ->getprocattr(): attribute name is const char *, TYVM... (Juraj Marcin) [2181134]
- selinux: declare read-only parameters const (Juraj Marcin) [2181134]
- selinux: use int arrays for boolean values (Juraj Marcin) [2181134]
- selinux: remove an unneeded variable in sel_make_class_dir_entries() (Juraj Marcin) [2181134]
- security: pass down mount idmapping to setattr hook (Juraj Marcin) [2181134]
- selinux: selinux_add_opt() callers free memory (Juraj Marcin) [2181134]
- selinux: Add boundary check in put_entry() (Juraj Marcin) [2181134]
- selinux: fix memleak in security_read_state_kernel() (Juraj Marcin) [2181134]
- selinux: fix typos in comments (Juraj Marcin) [2181134]
- selinux: drop unnecessary NULL check (Juraj Marcin) [2181134]
- selinux: add __randomize_layout to selinux_audit_data (Juraj Marcin) [2181134]
- selinux: free contexts previously transferred in selinux_add_opt() (Juraj Marcin) [2181134 2187402]
- security: declare member holding string literal const (Juraj Marcin) [2181134]
- selinux: fix indentation level of mls_ops block (Juraj Marcin) [2181134]
- selinux: include necessary headers in headers (Juraj Marcin) [2181134]
- selinux: avoid extra semicolon (Juraj Marcin) [2181134]
- selinux: update parameter documentation (Juraj Marcin) [2181134]
- selinux: resolve checkpatch errors (Juraj Marcin) [2181134]
- security: don't treat structure as an array of struct hlist_head (Juraj Marcin) [2181134]
- selinux: Remove redundant assignments (Juraj Marcin) [2181134]
- selinux: fix bad cleanup on error in hashtab_duplicate() (Juraj Marcin) [2181134]
- tipc: check the bearer min mtu properly when setting it by netlink (Xin Long) [2185140]
- tipc: do not update mtu if msg_max is too small in mtu negotiation (Xin Long) [2185140]
- tipc: add tipc_bearer_min_mtu to calculate min mtu (Xin Long) [2185140]
* Thu May 25 2023 Jan Stancek <jstancek@redhat.com> [5.14.0-319.el9]
- platform/x86/intel/ifs: Update IFS doc (David Arcari) [2153901]
- platform/x86/intel/ifs: Implement Array BIST test (David Arcari) [2153901]

6
sources
View File

@ -1,3 +1,3 @@
SHA512 (linux-5.14.0-319.el9.tar.xz) = 3a969eaab2079907a4e25fd16147404cb05dbc063e43b7dbf77ee02b5ad64336a0f303b97fb3c8c5c59f04f72fc191bc80c3995c7b0d2f7182c8e783fa0c28b4
SHA512 (kernel-abi-stablelists-5.14.0-319.el9.tar.bz2) = aa4c35bb4efa032ed622d3f8e13da58ed6b11a7d502bf1241c34bdd2ccc40d2d7fc81146a5e7b8dc0a756532e5e946bb78c170614e28f4d5b7ab826c27d5a685
SHA512 (kernel-kabi-dw-5.14.0-319.el9.tar.bz2) = 099aa605b257b585eb64513a090c417d1418d0f691f5c41ecdac6186f9e53159d4994798bfb3ca6bbcfff48ea34cb9b1e3f7eeabc88d052b95f7e79a73f4b97c
SHA512 (linux-5.14.0-320.el9.tar.xz) = 28f658787f3cd0ca4b47334a3a139d7d08973eadd3be7f7fa61f01e2c72c5c8050395db24a085ce12b69bf7e1c3b2a71f6cfb81fc66083056eff2cb62e1bd158
SHA512 (kernel-abi-stablelists-5.14.0-320.el9.tar.bz2) = 57c8f331e155acc56c5185f2e1c099e68a6026295873f96453f159c5a9c5e4321d66d28f80472a709c60b1a4d0195820677d1a10765ee0e89f28c43fc1be0695
SHA512 (kernel-kabi-dw-5.14.0-320.el9.tar.bz2) = 099aa605b257b585eb64513a090c417d1418d0f691f5c41ecdac6186f9e53159d4994798bfb3ca6bbcfff48ea34cb9b1e3f7eeabc88d052b95f7e79a73f4b97c