rpms/kernel
9
2
Fork 4
Code Issues Pull Requests Releases Activity
df0ed2af7a
kernel/kernel-armv7hl.config

7269 lines
190 KiB
Plaintext
Raw Normal View History

Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# arm
# CONFIG_60XX_WDT is not set
CONFIG_6LOWPAN_DEBUGFS=y
CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
CONFIG_6LOWPAN_GHC_ICMPV6=m
CONFIG_6LOWPAN_GHC_UDP=m
CONFIG_6LOWPAN=m
CONFIG_6LOWPAN_NHC_DEST=m
CONFIG_6LOWPAN_NHC_FRAGMENT=m
CONFIG_6LOWPAN_NHC_HOP=m
CONFIG_6LOWPAN_NHC_IPV6=m
CONFIG_6LOWPAN_NHC=m
CONFIG_6LOWPAN_NHC_MOBILITY=m
CONFIG_6LOWPAN_NHC_ROUTING=m
CONFIG_6LOWPAN_NHC_UDP=m
CONFIG_6PACK=m
CONFIG_8139CP=m
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_8139TOO_8129=y
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8723AU_AP_MODE is not set
# CONFIG_8723AU_BT_COEXIST is not set
# CONFIG_88EU_AP_MODE is not set
CONFIG_9P_FSCACHE=y
CONFIG_9P_FS=m
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_9P_FS_SECURITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
# CONFIG_AB3100_CORE is not set
# CONFIG_AB3100_OTP is not set
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_ABP060MG=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_ABX500_CORE is not set
CONFIG_ACCESSIBILITY=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_ACORN_PARTITION is not set
CONFIG_ACPI_ALS=m
# CONFIG_ACPI_DEBUGGER is not set
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_NFIT is not set
CONFIG_ACPI_PCI_SLOT=y
Linux v4.15-12216-gf9f1e414128e
2018-02-09 22:05:09 +00:00
CONFIG_ACPI_SPCR_TABLE=y
Linux v4.16-5456-g17dec0a94915
2018-04-04 17:45:22 +00:00
CONFIG_ACPI_TAD=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_AD2S1200 is not set
# CONFIG_AD2S1210 is not set
# CONFIG_AD2S90 is not set
# CONFIG_AD5064 is not set
CONFIG_AD525X_DPOT_I2C=m
CONFIG_AD525X_DPOT=m
CONFIG_AD525X_DPOT_SPI=m
Linux v4.16-7248-g06dd3dfeea60
2018-04-05 17:30:09 +00:00
CONFIG_AD5272=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_AD5360 is not set
# CONFIG_AD5380 is not set
# CONFIG_AD5421 is not set
# CONFIG_AD5446 is not set
# CONFIG_AD5449 is not set
# CONFIG_AD5504 is not set
# CONFIG_AD5592R is not set
# CONFIG_AD5593R is not set
# CONFIG_AD5624R_SPI is not set
# CONFIG_AD5686 is not set
# CONFIG_AD5755 is not set
# CONFIG_AD5761 is not set
# CONFIG_AD5764 is not set
# CONFIG_AD5791 is not set
# CONFIG_AD5933 is not set
# CONFIG_AD7150 is not set
# CONFIG_AD7152 is not set
# CONFIG_AD7192 is not set
# CONFIG_AD7266 is not set
# CONFIG_AD7280 is not set
# CONFIG_AD7291 is not set
# CONFIG_AD7298 is not set
# CONFIG_AD7303 is not set
# CONFIG_AD7476 is not set
# CONFIG_AD7606 is not set
# CONFIG_AD7746 is not set
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_AD7766=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_AD7780 is not set
# CONFIG_AD7791 is not set
# CONFIG_AD7793 is not set
# CONFIG_AD7816 is not set
# CONFIG_AD7887 is not set
# CONFIG_AD7923 is not set
# CONFIG_AD799X is not set
# CONFIG_AD8366 is not set
# CONFIG_AD8801 is not set
# CONFIG_AD9523 is not set
# CONFIG_AD9832 is not set
# CONFIG_AD9834 is not set
CONFIG_ADAPTEC_STARFIRE=m
# CONFIG_ADE7753 is not set
# CONFIG_ADE7754 is not set
# CONFIG_ADE7758 is not set
# CONFIG_ADE7759 is not set
# CONFIG_ADE7854 is not set
# CONFIG_ADF4350 is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADIS16060 is not set
# CONFIG_ADIS16080 is not set
# CONFIG_ADIS16130 is not set
# CONFIG_ADIS16136 is not set
# CONFIG_ADIS16201 is not set
# CONFIG_ADIS16203 is not set
# CONFIG_ADIS16209 is not set
# CONFIG_ADIS16240 is not set
# CONFIG_ADIS16260 is not set
# CONFIG_ADIS16400 is not set
# CONFIG_ADIS16480 is not set
# CONFIG_ADJD_S311 is not set
# CONFIG_ADM8211 is not set
# CONFIG_ADT7316 is not set
# CONFIG_ADVANTECH_WDT is not set
Linux v4.11-10603-g13e0988
2017-05-08 17:38:14 +00:00
# CONFIG_ADXL345_I2C is not set
# CONFIG_ADXL345_SPI is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_ADXRS450 is not set
CONFIG_AEABI=y
# CONFIG_AFE4403 is not set
# CONFIG_AFE4404 is not set
# CONFIG_AFFS_FS is not set
Linux v4.9-rc8-55-gce779d6 - Disable CONFIG_AF_KCM (rhbz 1402489)
2016-12-07 17:44:47 +00:00
# CONFIG_AF_KCM is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_AF_RXRPC is not set
# CONFIG_AFS_FS is not set
# CONFIG_AHCI_CEVA is not set
Linux v4.11-1464-gd3b5d35
2017-05-02 19:04:44 +00:00
CONFIG_AHCI_DM816=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_AHCI_IMX=m
CONFIG_AHCI_MVEBU=m
# CONFIG_AHCI_QORIQ is not set
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_AHCI_ST=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_AHCI_SUNXI=m
CONFIG_AHCI_TEGRA=m
# CONFIG_AIC79XX_BUILD_FIRMWARE is not set
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIRO_CS is not set
# CONFIG_AIRO is not set
CONFIG_AIX_PARTITION=y
# CONFIG_AK09911 is not set
# CONFIG_AK8974 is not set
CONFIG_AK8975=m
# CONFIG_AL3320A is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
Linux v4.14-rc5-31-g73d3393ada4f
2017-10-19 20:49:02 +00:00
CONFIG_ALLOW_LOCKDOWN_LIFT_BY_SYSRQ=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_ALTERA_MBOX is not set
Linux v4.13-9219-g015a9e66b9b8
2017-09-08 22:21:55 +00:00
CONFIG_ALTERA_MSGDMA=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_ALTERA_STAPL=m
CONFIG_ALTERA_TSE=m
CONFIG_ALX=m
# CONFIG_AM2315 is not set
CONFIG_AM335X_CONTROL_USB=m
CONFIG_AM335X_PHY_USB=m
CONFIG_AMBA_PL08X=y
CONFIG_AMD8111_ETH=m
CONFIG_AMD_PHY=m
Linux v4.9-2682-ge7aa8c2 (missing secure boot as that is being rebased to the new upstream tree
2016-12-13 22:26:04 +00:00
# CONFIG_AMD_XGBE_DCB is not set
# CONFIG_AMD_XGBE is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_AMIGA_PARTITION=y
# CONFIG_ANDROID is not set
# CONFIG_APDS9300 is not set
CONFIG_APDS9802ALS=m
# CONFIG_APDS9960 is not set
# CONFIG_APM_EMULATION is not set
CONFIG_APM_POWER=m
Linux v4.9-2682-ge7aa8c2 (missing secure boot as that is being rebased to the new upstream tree
2016-12-13 22:26:04 +00:00
# CONFIG_APPLE_PROPERTIES is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_APPLICOM is not set
Config improvements for Qualcomm devices
2017-06-26 22:32:58 +00:00
CONFIG_APQ_GCC_8084=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_APQ_MMCC_8084=m
CONFIG_AQUANTIA_PHY=m
CONFIG_AR5523=m
Linux v4.12-3441-g1996454
2017-07-05 16:00:04 +00:00
# CONFIG_ARCH_ACTIONS is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_ARCH_ALPINE is not set
# CONFIG_ARCH_ARTPEC is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCM_21664 is not set
# CONFIG_ARCH_BCM_23550 is not set
# CONFIG_ARCH_BCM_281XX is not set
CONFIG_ARCH_BCM2835=y
# CONFIG_ARCH_BCM_5301X is not set
# CONFIG_ARCH_BCM_53573 is not set
# CONFIG_ARCH_BCM_63XX is not set
# CONFIG_ARCH_BCM_CYGNUS is not set
Linux v4.14-12375-g2dcd9c71c1ff
2017-11-18 01:09:35 +00:00
# CONFIG_ARCH_BCM_HR2 is not set
cleanup some deprecated options, minor arm config tweaks
2017-09-24 14:23:59 +00:00
# CONFIG_ARCH_BCM_IPROC is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_ARCH_BCM_NSP is not set
CONFIG_ARCH_BCM=y
# CONFIG_ARCH_BERLIN is not set
# CONFIG_ARCH_BRCMSTB is not set
# CONFIG_ARCH_DIGICOLOR is not set
CONFIG_ARCH_EXYNOS3=y
CONFIG_ARCH_EXYNOS4=y
CONFIG_ARCH_EXYNOS5=y
CONFIG_ARCH_EXYNOS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
# CONFIG_ARCH_HI3xxx is not set
CONFIG_ARCH_HIGHBANK=y
# CONFIG_ARCH_HISI is not set
# CONFIG_ARCH_KEYSTONE is not set
# CONFIG_ARCH_MDM9615 is not set
# CONFIG_ARCH_MEDIATEK is not set
Update Amlogic meson support
2017-04-03 19:29:35 +00:00
CONFIG_ARCH_MESON=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_ARCH_MMP=y
CONFIG_ARCH_MSM8960=y
CONFIG_ARCH_MSM8974=y
CONFIG_ARCH_MSM8X60=y
# CONFIG_ARCH_MULTI_V6 is not set
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_MVEBU=y
CONFIG_ARCH_MXC=y
Linux v4.16-9576-g38c23685b273
2018-04-06 17:00:21 +00:00
# CONFIG_ARCH_NPCM is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
CONFIG_ARCH_OMAP3=y
CONFIG_ARCH_OMAP4=y
CONFIG_ARCH_QCOM=y
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_RENESAS is not set
CONFIG_ARCH_ROCKCHIP=y
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHMOBILE_MULTI is not set
# CONFIG_ARCH_SIRF is not set
# CONFIG_ARCH_SOCFPGA is not set
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_ARCH_STI=y
Linux v4.16-9576-g38c23685b273
2018-04-06 17:00:21 +00:00
# CONFIG_ARCH_STM32 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_ARCH_SUNXI=y
# CONFIG_ARCH_TANGO is not set
CONFIG_ARCH_TEGRA_114_SOC=y
CONFIG_ARCH_TEGRA_124_SOC=y
Linux v4.16-9576-g38c23685b273
2018-04-06 17:00:21 +00:00
# CONFIG_ARCH_TEGRA_194_SOC is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_ARCH_TEGRA_2x_SOC=y
CONFIG_ARCH_TEGRA_3x_SOC=y
CONFIG_ARCH_TEGRA=y
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_UNIPHIER is not set
CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA=y
CONFIG_ARCH_VEXPRESS_DCSCB=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_ARCH_VEXPRESS_SPC=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_ARCH_VEXPRESS_TC2_PM=y
CONFIG_ARCH_VEXPRESS=y
CONFIG_ARCH_VIRT=y
# CONFIG_ARCH_WM8850 is not set
# CONFIG_ARCH_ZX is not set
CONFIG_ARCH_ZYNQ=y
# CONFIG_ARCNET is not set
Linux v4.11-1464-gd3b5d35
2017-05-02 19:04:44 +00:00
CONFIG_ARM64_ERRATUM_858921=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_ARMADA_THERMAL=m
CONFIG_ARM_AMBA=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
CONFIG_ARM_ARCH_TIMER=y
Linux v4.15-1549-g6304672b7f0a
2018-01-30 18:26:27 +00:00
CONFIG_ARM_ARMADA_37XX_CPUFREQ=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_ARM_ASM_UNIFIED=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_ARM_BIG_LITTLE_CPUFREQ=m
CONFIG_ARM_BIG_LITTLE_CPUIDLE=y
CONFIG_ARM_CCI400_PMU=y
CONFIG_ARM_CCI5xx_PMU=y
CONFIG_ARM_CCI=y
CONFIG_ARM_CCN=y
# CONFIG_ARM_CHARLCD is not set
CONFIG_ARM_CPUIDLE=y
CONFIG_ARM_CPU_SUSPEND=y
CONFIG_ARM_CPU_TOPOLOGY=y
CONFIG_ARM_CRYPTO=y
CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8
CONFIG_ARM_DMA_USE_IOMMU=y
# CONFIG_ARM_DT_BL_CPUFREQ is not set
# CONFIG_ARM_ERRATA_326103 is not set
# CONFIG_ARM_ERRATA_411920 is not set
CONFIG_ARM_ERRATA_430973=y
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not set
CONFIG_ARM_ERRATA_643719=y
CONFIG_ARM_ERRATA_720789=y
CONFIG_ARM_ERRATA_742230=y
CONFIG_ARM_ERRATA_742231=y
CONFIG_ARM_ERRATA_743622=y
CONFIG_ARM_ERRATA_751472=y
CONFIG_ARM_ERRATA_754322=y
CONFIG_ARM_ERRATA_754327=y
CONFIG_ARM_ERRATA_764369=y
CONFIG_ARM_ERRATA_773022=y
CONFIG_ARM_ERRATA_775420=y
CONFIG_ARM_ERRATA_798181=y
CONFIG_ARM_ERRATA_818325_852422=y
CONFIG_ARM_ERRATA_821420=y
CONFIG_ARM_ERRATA_825619=y
CONFIG_ARM_ERRATA_852421=y
CONFIG_ARM_ERRATA_852423=y
CONFIG_ARM_EXYNOS5440_CPUFREQ=m
Linux v4.10-rc1 (didn't adjust debug options), ARM config updates, minor general config cleanups
2016-12-27 02:51:37 +00:00
CONFIG_ARM_EXYNOS_BUS_DEVFREQ=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_ARM_EXYNOS_CPUIDLE=y
CONFIG_ARM_GIC_V2M=y
CONFIG_ARM_GIC_V3_ITS=y
CONFIG_ARM_GIC_V3=y
CONFIG_ARM_GIC=y
CONFIG_ARM_GLOBAL_TIMER=y
CONFIG_ARM_HIGHBANK_CPUFREQ=m
# CONFIG_ARM_HIGHBANK_CPUIDLE is not set
CONFIG_ARM_IMX6Q_CPUFREQ=m
CONFIG_ARM_KPROBES_TEST=m
# CONFIG_ARM_LPAE is not set
CONFIG_ARM_MHU=m
# CONFIG_ARM_MODULE_PLTS is not set
CONFIG_ARM_MVEBU_V7_CPUIDLE=y
# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
CONFIG_ARM_PATCH_IDIV=y
CONFIG_ARM_PL172_MPMC=m
CONFIG_ARM_PMU=y
Minor ARM config updates
2017-01-06 15:44:21 +00:00
# CONFIG_ARM_PSCI_CHECKER is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_ARM_PSCI=y
Linux v4.15-10668-g35277995e179
2018-02-05 18:54:33 +00:00
# CONFIG_ARM_PTDUMP_DEBUGFS is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_ARM_PTDUMP is not set
Linux v4.10-rc1 (didn't adjust debug options), ARM config updates, minor general config cleanups
2016-12-27 02:51:37 +00:00
CONFIG_ARM_RK3399_DMC_DEVFREQ=m
Linux v4.16-9576-g38c23685b273
2018-04-06 17:00:21 +00:00
CONFIG_ARM_SCMI_CPUFREQ=m
CONFIG_ARM_SCMI_POWER_DOMAIN=m
CONFIG_ARM_SCMI_PROTOCOL=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_ARM_SCPI_CPUFREQ=m
CONFIG_ARM_SCPI_POWER_DOMAIN=m
CONFIG_ARM_SCPI_PROTOCOL=m
CONFIG_ARM_SMMU=y
CONFIG_ARM_SP805_WATCHDOG=m
Linux v4.14-9248-ge60e1ee60630
2017-11-16 17:50:37 +00:00
CONFIG_ARM_SPE_PMU=m
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_ARM_STI_CPUFREQ=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_ARM_TEGRA124_CPUFREQ=m
Linux v4.16-10608-gf8cf2f16a7c9
2018-04-09 16:22:00 +00:00
CONFIG_ARM_TEGRA186_CPUFREQ=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_ARM_TEGRA20_CPUFREQ is not set
CONFIG_ARM_TEGRA_DEVFREQ=m
CONFIG_ARM_THUMBEE=y
CONFIG_ARM_THUMB=y
Linux v4.10-1242-g9763dd6
2017-02-21 19:21:44 +00:00
CONFIG_ARM_TI_CPUFREQ=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_ARM_TIMER_SP804=y
CONFIG_ARM_UNWIND=y
CONFIG_ARM_VEXPRESS_SPC_CPUFREQ=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_ARM_VIRT_EXT=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_ARM=y
CONFIG_ARM_ZYNQ_CPUIDLE=y
# CONFIG_AS3935 is not set
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_ASYMMETRIC_KEY_TYPE=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_ASYNC_RAID6_TEST=m
CONFIG_ASYNC_TX_DMA=y
CONFIG_AT76C50X_USB=m
CONFIG_AT803X_PHY=m
CONFIG_ATA_BMDMA=y
CONFIG_ATA_GENERIC=m
CONFIG_ATAGS_PROC=y
CONFIG_ATAGS=y
# CONFIG_ATALK is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_ATA_PIIX=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_ATA_SFF=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA=y
# CONFIG_ATH10K_AHB is not set
CONFIG_ATH10K_DEBUGFS=y
# CONFIG_ATH10K_DEBUG is not set
CONFIG_ATH10K=m
CONFIG_ATH10K_PCI=m
Linux v4.12-6090-g9b51f04
2017-07-06 16:11:57 +00:00
CONFIG_ATH10K_SDIO=m
Linux v4.15-6064-g255442c93843
2018-02-01 21:50:49 +00:00
# CONFIG_ATH10K_SPECTRAL is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_ATH10K_TRACING is not set
Linux v4.13-6657-g3b9f8ed25dbe
2017-09-07 21:18:25 +00:00
CONFIG_ATH10K_USB=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_ATH5K_DEBUG=y
CONFIG_ATH5K=m
# CONFIG_ATH5K_TRACER is not set
CONFIG_ATH6KL_DEBUG=y
CONFIG_ATH6KL=m
CONFIG_ATH6KL_SDIO=m
# CONFIG_ATH6KL_TRACING is not set
CONFIG_ATH6KL_USB=m
CONFIG_ATH9K_AHB=y
CONFIG_ATH9K_BTCOEX_SUPPORT=y
# CONFIG_ATH9K_CHANNEL_CONTEXT is not set
Linux v4.15-6064-g255442c93843
2018-02-01 21:50:49 +00:00
# CONFIG_ATH9K_COMMON_SPECTRAL is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_ATH9K_DEBUGFS=y
# CONFIG_ATH9K_DEBUG is not set
# CONFIG_ATH9K_DYNACK is not set
# CONFIG_ATH9K_HTC_DEBUGFS is not set
CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HWRNG is not set
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
# CONFIG_ATH9K_STATION_STATISTICS is not set
# CONFIG_ATH9K_WOW is not set
CONFIG_ATH_COMMON=m
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH_TRACEPOINTS is not set
CONFIG_ATL1C=m
CONFIG_ATL1E=m
CONFIG_ATL1=m
CONFIG_ATL2=m
# CONFIG_ATLAS_PH_SENSOR is not set
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_ATM_BR2684=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
# CONFIG_ATM_DRIVERS is not set
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATMEL is not set
# CONFIG_ATM_ENI_DEBUG is not set
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_FORE200E_DEBUG=0
# CONFIG_ATM_FORE200E is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
# CONFIG_ATM_HE is not set
# CONFIG_ATM_HE_USE_SUNI is not set
# CONFIG_ATM_HORIZON_DEBUG is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA_DEBUG is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
# CONFIG_ATM_LANAI is not set
CONFIG_ATM_LANE=m
CONFIG_ATM=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_NICSTAR=m
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
CONFIG_ATM_SOLOS=m
CONFIG_ATM_TCP=m
# CONFIG_ATM_ZATM_DEBUG is not set
# CONFIG_ATM_ZATM is not set
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ATP=m
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_AUXDISPLAY=y
# CONFIG_AVERAGE is not set
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_AX25=m
CONFIG_AX88796_93CX6=y
CONFIG_AX88796=m
CONFIG_AXI_DMAC=m
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
CONFIG_AXP20X_ADC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_AXP20X_POWER=m
CONFIG_AXP288_ADC=m
CONFIG_AXP288_CHARGER=m
CONFIG_AXP288_FUEL_GAUGE=m
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_BCMA=y
Turn off B43 debugging by default (rhbz 1442912)
2017-06-15 15:54:59 +00:00
# CONFIG_B43_DEBUG is not set
# CONFIG_B43LEGACY_DEBUG is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY=m
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_B43LEGACY_PIO=y
CONFIG_B43=m
CONFIG_B43_PHY_G=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_N=y
CONFIG_B43_SDIO=y
CONFIG_B44=m
CONFIG_B44_PCI=y
CONFIG_B53=m
CONFIG_B53_MDIO_DRIVER=m
CONFIG_B53_MMAP_DRIVER=m
CONFIG_B53_SPI_DRIVER=m
CONFIG_B53_SRAB_DRIVER=m
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
CONFIG_BACKLIGHT_ARCXCNN=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_BACKLIGHT_BD6107 is not set
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_BACKLIGHT_CLASS_DEVICE=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_BACKLIGHT_DA9052=m
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_GPIO=m
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3630 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_LP855X=m
# CONFIG_BACKLIGHT_LV5207LP is not set
CONFIG_BACKLIGHT_PANDORA=m
# CONFIG_BACKLIGHT_PM8941_WLED is not set
CONFIG_BACKLIGHT_PWM=m
# CONFIG_BACKLIGHT_SAHARA is not set
CONFIG_BACKLIGHT_TPS65217=m
CONFIG_BACKLIGHT_WM831X=m
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_BALLOON_COMPACTION=y
CONFIG_BATMAN_ADV_BATMAN_V=y
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
# CONFIG_BATMAN_ADV_DEBUGFS is not set
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_MCAST=y
CONFIG_BATMAN_ADV_NC=y
Linux v4.12-rc1
2017-05-15 15:20:02 +00:00
CONFIG_BATTERY_AXP20X=m
Linux v4.12-3441-g1996454
2017-07-05 16:00:04 +00:00
# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
Linux v4.13-11197-gf007cad159e9
2017-09-11 18:05:08 +00:00
CONFIG_BATTERY_BQ27XXX_HDQ=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_BATTERY_BQ27XXX_I2C=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_BATTERY_BQ27XXX=m
CONFIG_BATTERY_DA9052=m
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
Linux v4.11-1464-gd3b5d35
2017-05-02 19:04:44 +00:00
# CONFIG_BATTERY_LEGO_EV3 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
Turn off BATTERY_MAX1721X as I don't think it is needed and it brings in regmap-w1
2017-09-11 20:56:44 +00:00
# CONFIG_BATTERY_MAX1721X is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_BATTERY_RX51=m
CONFIG_BATTERY_SBS=m
CONFIG_BATTERY_TWL4030_MADC=m
CONFIG_BAYCOM_EPP=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
# CONFIG_BCACHE_CLOSURES_DEBUG is not set
# CONFIG_BCACHE_DEBUG is not set
CONFIG_BCACHE=m
CONFIG_BCM2835_MBOX=y
Linux v4.12-rc1
2017-05-15 15:20:02 +00:00
CONFIG_BCM2835_THERMAL=m
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
# CONFIG_BCM2835_VCHIQ is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_BCM2835_WDT=m
CONFIG_BCM63XX_PHY=m
# CONFIG_BCM7038_WDT is not set
CONFIG_BCM7XXX_PHY=m
CONFIG_BCM87XX_PHY=m
CONFIG_BCMA_BLOCKIO=y
# CONFIG_BCMA_DEBUG is not set
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA=m
minor config cleanups
2017-05-12 12:08:25 +00:00
# CONFIG_BCM_FLEXRM_MBOX is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_BCMGENET=m
Linux v3.13-2502-gec513b1
2014-01-22 02:50:28 +00:00
# CONFIG_BCM_KONA_USB2_PHY is not set
Linux v4.12-10317-gaf3c8d9
2017-07-10 15:40:53 +00:00
CONFIG_BCM_SBA_RAID=m
Linux v4.11-10603-g13e0988
2017-05-08 17:38:14 +00:00
# CONFIG_BCM_VIDEOCORE is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_BE2ISCSI=m
# CONFIG_BE2NET_HWMON is not set
CONFIG_BE2NET=m
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BEFS_FS is not set
Linux v4.11-1464-gd3b5d35
2017-05-02 19:04:44 +00:00
CONFIG_BFQ_GROUP_IOSCHED=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_BFS_FS is not set
CONFIG_BH1750=m
# CONFIG_BH1780 is not set
CONFIG_BIG_KEYS=y
CONFIG_BIG_LITTLE=y
# CONFIG_BINFMT_AOUT is not set
Linux v4.14-12375-g2dcd9c71c1ff
2017-11-18 01:09:35 +00:00
# CONFIG_BINFMT_ELF_FDPIC is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_FLAT is not set
CONFIG_BINFMT_MISC=m
CONFIG_BINFMT_SCRIPT=y
CONFIG_BLK_CGROUP=y
# CONFIG_BLK_CMDLINE_PARSER is not set
Linux v4.10-2512-g7bb0338
2017-02-22 15:39:25 +00:00
CONFIG_BLK_DEBUG_FS=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_DM=y
CONFIG_BLK_DEV_DRBD=m
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_DEV_INITRD=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
CONFIG_BLK_DEV_MD=y
CONFIG_BLK_DEV_NBD=m
Linux v4.15-1549-g6304672b7f0a
2018-01-30 18:26:27 +00:00
# CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_NVME=m
# CONFIG_BLK_DEV_NVME_SCSI is not set
CONFIG_BLK_DEV_OSD=m
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
CONFIG_BLK_DEV_PMEM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_DAX=y
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_RBD=m
# CONFIG_BLK_DEV_RSXX is not set
CONFIG_BLK_DEV_SD=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_BLK_DEV_SKD=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_BLK_DEV_SR=y
disable a number of unused PATA/SATA drivers on ARM, don't build x86 specific drivers on other arches, minor tweaks to other arch specific configs
2017-10-01 18:33:34 +00:00
# CONFIG_BLK_DEV_SX8 is not set
Linux v4.11-1464-gd3b5d35
2017-05-02 19:04:44 +00:00
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_BLK_DEV_UMEM=m
CONFIG_BLK_DEV=y
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_BLK_DEV_ZONED=y
Linux v4.10-2512-g7bb0338
2017-02-22 15:39:25 +00:00
CONFIG_BLK_SED_OPAL=y
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_BLK_WBT_MQ=y
# CONFIG_BLK_WBT_SQ is not set
CONFIG_BLK_WBT=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_BL_SWITCHER_DUMMY_IF is not set
CONFIG_BL_SWITCHER=y
# CONFIG_BMA180 is not set
# CONFIG_BMA220 is not set
CONFIG_BMC150_ACCEL=m
# CONFIG_BMC150_MAGN_I2C is not set
# CONFIG_BMC150_MAGN is not set
# CONFIG_BMC150_MAGN_SPI is not set
# CONFIG_BMG160 is not set
# CONFIG_BMI160_I2C is not set
# CONFIG_BMI160_SPI is not set
CONFIG_BMP280=m
CONFIG_BNA=m
CONFIG_BNX2=m
CONFIG_BNX2X=m
CONFIG_BNX2X_SRIOV=y
Linux v4.9-2682-ge7aa8c2 (missing secure boot as that is being rebased to the new upstream tree
2016-12-13 22:26:04 +00:00
CONFIG_BNXT_DCB=y
Linux v4.13-6657-g3b9f8ed25dbe
2017-09-07 21:18:25 +00:00
CONFIG_BNXT_FLOWER_OFFLOAD=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_BNXT=m
CONFIG_BNXT_SRIOV=y
CONFIG_BONDING=m
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
Linux v4.14-2229-g894025f24bd0
2017-11-14 18:23:09 +00:00
# CONFIG_BOOTPARAM_LOCKDEP_CROSSRELEASE_FULLSTACK is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_BOUNCE=y
Linux v4.15-rc7-152-g1545dec46db3
2018-01-12 17:12:40 +00:00
CONFIG_BPF_JIT_ALWAYS_ON=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_BPF_JIT=y
Linux v4.16-rc1
2018-02-12 13:31:25 +00:00
# CONFIG_BPF_KPROBE_OVERRIDE is not set
Linux v4.13-6657-g3b9f8ed25dbe
2017-09-07 21:18:25 +00:00
CONFIG_BPF_STREAM_PARSER=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_BPF_SYSCALL=y
CONFIG_BPQETHER=m
# CONFIG_BRCMDBG is not set
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_PCIE=y
CONFIG_BRCMFMAC_SDIO=y
CONFIG_BRCMFMAC_USB=y
CONFIG_BRCMSMAC=m
# CONFIG_BRCMSTB_GISB_ARB is not set
# CONFIG_BRCM_TRACING is not set
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_BRIDGE_NETFILTER=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_BROADCOM_PHY=m
CONFIG_BSD_DISKLABEL=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BT_6LOWPAN=m
CONFIG_BT_ATH3K=m
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_BREDR=y
CONFIG_BT_CMTP=m
# CONFIG_BT_DEBUGFS is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIBTUART=m
Enable USB autosuspend for USB bluetooth receivers by default, use btusb.enable_autosuspend=n on the kernel cmdline to disable
2017-11-16 12:10:41 +00:00
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_BT_HCIUART_AG6XX=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_BCM=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_INTEL=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_MRVL=y
Add support for TI Bluetooth modules, Add fixes for 96boards HiKey
2017-04-12 11:05:02 +00:00
CONFIG_BT_HCIUART_NOKIA=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_BT_HCIUART_QCA=y
Sync sun8i emac options, QCom fixes and config tweaks, Minor cleanups
2017-07-03 12:02:38 +00:00
CONFIG_BT_HCIUART_SERDEV=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_BT_HCIVHCI=m
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
CONFIG_BT_LEDS=y
CONFIG_BT_LE=y
CONFIG_BT=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_QCA=m
Config improvements for Qualcomm devices
2017-06-26 22:32:58 +00:00
CONFIG_BT_QCOMSMD=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
Linux v4.14-4050-g37cb8e1f8e10
2017-11-15 17:40:48 +00:00
# CONFIG_BTRFS_FS_REF_VERIFY is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BT_SELFTEST is not set
# CONFIG_BTT is not set
CONFIG_BT_WILINK=m
Linux v4.9-2682-ge7aa8c2 (missing secure boot as that is being rebased to the new upstream tree
2016-12-13 22:26:04 +00:00
CONFIG_BUG_ON_DATA_CORRUPTION=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_BUILD_DOCSRC=y
# CONFIG_C2PORT is not set
# CONFIG_CACHE_FEROCEON_L2 is not set
# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
CONFIG_CACHEFILES=m
CONFIG_CACHE_L2X0_PMU=y
CONFIG_CACHE_L2X0=y
CONFIG_CACHE_TAUROS2=y
CONFIG_CADENCE_WATCHDOG=m
# CONFIG_CAIF is not set
CONFIG_CAN_8DEV_USB=m
CONFIG_CAN_BCM=m
CONFIG_CAN_CALC_BITTIMING=y
# CONFIG_CAN_CC770_ISA is not set
CONFIG_CAN_CC770=m
CONFIG_CAN_CC770_PLATFORM=m
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PCI=m
CONFIG_CAN_C_CAN_PLATFORM=m
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_CAN_DEV=m
CONFIG_CAN_EMS_PCI=m
# CONFIG_CAN_EMS_PCMCIA is not set
CONFIG_CAN_EMS_USB=m
CONFIG_CAN_ESD_USB2=m
CONFIG_CAN_FLEXCAN=m
# CONFIG_CAN_GRCAN is not set
CONFIG_CAN_GS_USB=m
CONFIG_CAN_GW=m
Linux v4.11-4395-g89c9fea
2017-05-03 17:50:25 +00:00
CONFIG_CAN_HI311X=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CAN_IFI_CANFD=m
CONFIG_CAN_KVASER_PCI=m
CONFIG_CAN_KVASER_USB=m
CONFIG_CAN_LEDS=y
CONFIG_CAN=m
CONFIG_CAN_M_CAN=m
Linux v4.11-4395-g89c9fea
2017-05-03 17:50:25 +00:00
CONFIG_CAN_MCBA_USB=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_CAN_MCP251X is not set
CONFIG_CAN_PEAK_PCIEC=y
Linux v4.11-4395-g89c9fea
2017-05-03 17:50:25 +00:00
CONFIG_CAN_PEAK_PCIEFD=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CAN_PEAK_PCI=m
# CONFIG_CAN_PEAK_PCMCIA is not set
CONFIG_CAN_PEAK_USB=m
CONFIG_CAN_PLX_PCI=m
CONFIG_CAN_RAW=m
# CONFIG_CAN_RCAR_CANFD is not set
# CONFIG_CAN_RCAR is not set
# CONFIG_CAN_SJA1000_ISA is not set
CONFIG_CAN_SJA1000=m
CONFIG_CAN_SJA1000_PLATFORM=m
CONFIG_CAN_SLCAN=m
# CONFIG_CAN_SOFTING_CS is not set
CONFIG_CAN_SOFTING=m
CONFIG_CAN_SUN4I=m
# CONFIG_CAN_TI_HECC is not set
# CONFIG_CAN_TSCAN1 is not set
CONFIG_CAN_VCAN=m
Linux v4.11-4395-g89c9fea
2017-05-03 17:50:25 +00:00
CONFIG_CAN_VXCAN=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_CAN_XILINXCAN is not set
CONFIG_CAPI_AVM=y
# CONFIG_CAPI_EICON is not set
# CONFIG_CAPI_TRACE is not set
CONFIG_CARDBUS=y
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
# CONFIG_CARL9170_DEBUGFS is not set
# CONFIG_CARL9170_HWRNG is not set
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170=m
CONFIG_CASSINI=m
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
# CONFIG_CC10001_ADC is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
Linux v4.13-4257-ge7d0c41ecc2e
2017-09-06 18:29:50 +00:00
# CONFIG_CCS811 is not set
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD=m
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
Linux v4.16-5456-g17dec0a94915
2018-04-04 17:45:22 +00:00
# CONFIG_CEC_PIN_ERROR_INJ is not set
Enable Physlink/SFP functionality, minor cleanups, Tegra DRM FTB fix
2017-09-12 17:26:40 +00:00
CONFIG_CEC_PIN=y
minor config cleanups
2017-05-12 12:08:25 +00:00
CONFIG_CEC_PLATFORM_DRIVERS=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CEPH_FSCACHE=y
CONFIG_CEPH_FS=m
CONFIG_CEPH_FS_POSIX_ACL=y
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_CFAG12864B=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CFAG12864B_RATE=20
Turn on CONFIG_CFG80211_CRDA_SUPPORT
2017-03-16 20:03:57 +00:00
CONFIG_CFG80211_CRDA_SUPPORT=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CFG80211_DEBUGFS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211=m
CONFIG_CFG80211_WEXT=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_CFS_BANDWIDTH=y
Linux v4.9-2682-ge7aa8c2 (missing secure boot as that is being rebased to the new upstream tree
2016-12-13 22:26:04 +00:00
CONFIG_CGROUP_BPF=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CGROUP_CPUACCT=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_HUGETLB is not set
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_CGROUP_NET_CLASSID=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_PIDS=y
Linux v4.10-10531-g86292b3
2017-02-28 17:24:03 +00:00
# CONFIG_CGROUP_RDMA is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
- Enable Tiny DRM on ARM platforms - ARM config updates - General config cleanups - Add patch to fix desktop lockups on RPi (vc4) RHBZ# 1389163
2017-03-01 12:12:17 +00:00
CONFIG_CHARGER_AXP20X=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CHARGER_BQ2415X=m
CONFIG_CHARGER_BQ24190=m
# CONFIG_CHARGER_BQ24257 is not set
CONFIG_CHARGER_BQ24735=m
# CONFIG_CHARGER_BQ25890 is not set
Linux v4.10-1242-g9763dd6
2017-02-21 19:21:44 +00:00
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CHARGER_GPIO=m
CONFIG_CHARGER_ISP1704=m
# CONFIG_CHARGER_LP8727 is not set
Linux v4.12-3441-g1996454
2017-07-05 16:00:04 +00:00
# CONFIG_CHARGER_LTC3651 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_MAX8903 is not set
CONFIG_CHARGER_MAX8997=m
# CONFIG_CHARGER_PCF50633 is not set
cleanup some deprecated options, minor arm config tweaks
2017-09-24 14:23:59 +00:00
CONFIG_CHARGER_QCOM_SMBB=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_CHARGER_RT9455 is not set
Linux v4.10-1242-g9763dd6
2017-02-21 19:21:44 +00:00
# CONFIG_CHARGER_SBS is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CHARGER_SMB347=m
CONFIG_CHARGER_TPS65090=m
CONFIG_CHARGER_TPS65217=m
CONFIG_CHARGER_TWL4030=m
Linux v4.14-9248-ge60e1ee60630
2017-11-16 17:50:37 +00:00
# CONFIG_CHASH_SELFTEST is not set
# CONFIG_CHASH_STATS is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CHECKPOINT_RESTORE=y
Linux v4.15-6064-g255442c93843
2018-02-01 21:50:49 +00:00
CONFIG_CHELSIO_IPSEC_INLINE=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4_DCB=y
# CONFIG_CHELSIO_T4_FCOE is not set
CONFIG_CHELSIO_T4=m
CONFIG_CHELSIO_T4VF=m
CONFIG_CHR_DEV_OSST=m
CONFIG_CHR_DEV_SCH=m
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHROME_PLATFORMS=y
Linux v4.14-12375-g2dcd9c71c1ff
2017-11-18 01:09:35 +00:00
CONFIG_CHT_DC_TI_PMIC_OPREGION=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CICADA_PHY=m
CONFIG_CIFS_ACL=y
# CONFIG_CIFS_DEBUG2 is not set
Linux v4.12-10317-gaf3c8d9
2017-07-10 15:40:53 +00:00
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CIFS_DEBUG=y
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_FSCACHE=y
CONFIG_CIFS=m
CONFIG_CIFS_NFSD_EXPORT=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_SMB2=y
# CONFIG_CIFS_SMB311 is not set
Linux v4.15-1549-g6304672b7f0a
2018-01-30 18:26:27 +00:00
# CONFIG_CIFS_SMB_DIRECT is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_STATS=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CLEANCACHE=y
Linux v4.13-11811-g46c1e79fee41
2017-09-14 16:54:39 +00:00
# CONFIG_CLK_HSDK is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_CLK_QORIQ is not set
CONFIG_CLK_SP810=y
CONFIG_CLKSRC_VERSATILE=y
CONFIG_CLK_TWL6040=m
CONFIG_CLK_VEXPRESS_OSC=y
CONFIG_CLOCK_THERMAL=y
CONFIG_CLS_U32_MARK=y
CONFIG_CLS_U32_PERF=y
CONFIG_CM32181=m
# CONFIG_CM3232 is not set
# CONFIG_CM3323 is not set
Enable sound SoC on aarch64, Update some ARM patches to latest upstream, small cleanups
2017-04-26 10:33:46 +00:00
CONFIG_CM3605=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CM36651=m
CONFIG_CMA_ALIGNMENT=8
CONFIG_CMA_AREAS=7
CONFIG_CMA_DEBUGFS=y
# CONFIG_CMA_DEBUG is not set
CONFIG_CMA_SIZE_MBYTES=64
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
CONFIG_CMA=y
CONFIG_CMDLINE=""
CONFIG_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_CNIC=m
# CONFIG_CODA_FS is not set
# CONFIG_COMEDI is not set
CONFIG_COMMON_CLK_AXI_CLKGEN=m
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
CONFIG_COMMON_CLK_MAX77686=m
CONFIG_COMMON_CLK_PALMAS=m
Enable Amlogic (meson) SoCs for ARMv7/aarch64
2016-12-27 04:15:07 +00:00
CONFIG_COMMON_CLK_PWM=m
Config improvements for Qualcomm devices
2017-06-26 22:32:58 +00:00
CONFIG_COMMON_CLK_QCOM=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_COMMON_CLK_RK808=m
CONFIG_COMMON_CLK_S2MPS11=m
Linux v4.16-9576-g38c23685b273
2018-04-06 17:00:21 +00:00
CONFIG_COMMON_CLK_SCMI=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_COMMON_CLK_SCPI=m
# CONFIG_COMMON_CLK_SI514 is not set
CONFIG_COMMON_CLK_SI5351=m
Minor ARM config updates
2017-07-17 09:23:40 +00:00
# CONFIG_COMMON_CLK_SI570 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_COMMON_CLK_TI_ADPLL=m
Linux v4.10-10320-ge5d56ef
2017-02-27 16:49:14 +00:00
# CONFIG_COMMON_CLK_VC5 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_COMMON_CLK_VERSATILE=y
CONFIG_COMMON_CLK_XLNX_CLKWZRD=m
CONFIG_COMMON_CLK=y
Linux v4.10-9579-gf1ef09f Includes config options from yesterday that were missed
2017-02-24 16:50:29 +00:00
# CONFIG_COMMON_RESET_HI3660 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_COMPACTION=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_COMPILE_TEST is not set
CONFIG_CONFIGFS_FS=y
CONFIG_CONNECTOR=y
Linux v4.9-2682-ge7aa8c2 (missing secure boot as that is being rebased to the new upstream tree
2016-12-13 22:26:04 +00:00
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_CORDIC=m
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_CORESIGHT is not set
Linux v4.12-6090-g9b51f04
2017-07-06 16:11:57 +00:00
CONFIG_CORTINA_PHY=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_CPU5_WDT is not set
# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPUFREQ_DT=m
CONFIG_CPUFREQ_DT_PLATDEV=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ=y
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE=y
Linux v4.14-2229-g894025f24bd0
2017-11-14 18:23:09 +00:00
# CONFIG_CPU_ISOLATION is not set
Fix nodebug kernels, CPUMASK_OFFSTACK is always selected with MAXSMP
2017-01-03 15:12:19 +00:00
CONFIG_CPUMASK_OFFSTACK=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CPUSETS=y
CONFIG_CPU_SW_DOMAIN_PAN=y
CONFIG_CPU_THERMAL=y
CONFIG_CRAMFS=m
Linux v4.14-12375-g2dcd9c71c1ff
2017-11-18 01:09:35 +00:00
# CONFIG_CRAMFS_MTD is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRASH_DUMP=y
CONFIG_CRASH=m
CONFIG_CRC16=y
# CONFIG_CRC32_SELFTEST is not set
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_CRC32=y
Linux v4.12-3441-g1996454
2017-07-05 16:00:04 +00:00
CONFIG_CRC4=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_CRC7=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRC8=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_CRC_CCITT=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRC_ITU_T=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_CRC_T10DIF=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CROS_EC_CHARDEV=m
CONFIG_CROS_EC_PROTO=y
Enable Chromebook keyboard backlight (rhbz 1447031)
2017-06-02 17:25:31 +00:00
CONFIG_CROS_KBD_LED_BACKLIGHT=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CROSS_COMPILE=""
CONFIG_CROSS_MEMORY_ATTACH=y
Linux v4.16-10608-gf8cf2f16a7c9
2018-04-09 16:22:00 +00:00
CONFIG_CRYPTO_842=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRYPTO_AES_ARM_BS=y
# CONFIG_CRYPTO_AES_ARM_CE is not set
CONFIG_CRYPTO_AES_ARM=y
Linux v4.10-9579-gf1ef09f Includes config options from yesterday that were missed
2017-02-24 16:50:29 +00:00
CONFIG_CRYPTO_AES_TI=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CCM=m
Linux v4.16-7248-g06dd3dfeea60
2018-04-05 17:30:09 +00:00
CONFIG_CRYPTO_CFB=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRYPTO_CHACHA20=m
Linux v4.10-9579-gf1ef09f Includes config options from yesterday that were missed
2017-02-24 16:50:29 +00:00
CONFIG_CRYPTO_CHACHA20_NEON=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_CMAC=m
Linux v4.9-8648-g5cc60ae
2016-12-15 19:27:26 +00:00
CONFIG_CRYPTO_CRC32_ARM64_CE=m
CONFIG_CRYPTO_CRC32_ARM_CE=m
CONFIG_CRYPTO_CRC32C_VPMSUM=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=m
Linux v4.9-8648-g5cc60ae
2016-12-15 19:27:26 +00:00
CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m
CONFIG_CRYPTO_CRCT10DIF_ARM_CE=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_CRYPTO_CRYPTD=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRYPTO_CTR=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_CRYPTO_CTS=y
Linux v4.16-10608-gf8cf2f16a7c9
2018-04-09 16:22:00 +00:00
CONFIG_CRYPTO_DEFLATE=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRYPTO_DES=m
Linux v4.11-10603-g13e0988
2017-05-08 17:38:14 +00:00
# CONFIG_CRYPTO_DEV_CCREE is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRYPTO_DEV_CHELSIO=m
Linux v4.16-5456-g17dec0a94915
2018-04-04 17:45:22 +00:00
CONFIG_CRYPTO_DEV_CHELSIO_TLS=m
Linux v4.11-4395-g89c9fea
2017-05-03 17:50:25 +00:00
CONFIG_CRYPTO_DEV_EXYNOS_RNG=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=m
CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=m
# CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG is not set
CONFIG_CRYPTO_DEV_FSL_CAAM_INTC_COUNT_THLD=8
CONFIG_CRYPTO_DEV_FSL_CAAM_INTC_TIME_THLD=8192
CONFIG_CRYPTO_DEV_FSL_CAAM_INTC=y
CONFIG_CRYPTO_DEV_FSL_CAAM_JR=m
CONFIG_CRYPTO_DEV_FSL_CAAM=m
CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API=m
CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=3
CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API=m
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_CRYPTO_DEV_MARVELL_CESA=m
# CONFIG_CRYPTO_DEV_MXC_SCC is not set
# CONFIG_CRYPTO_DEV_MXS_DCP is not set
Linux v4.12-6090-g9b51f04
2017-07-06 16:11:57 +00:00
CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRYPTO_DEV_OMAP_AES=m
CONFIG_CRYPTO_DEV_OMAP_DES=m
Linux v4.12-6090-g9b51f04
2017-07-06 16:11:57 +00:00
CONFIG_CRYPTO_DEV_OMAP=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRYPTO_DEV_OMAP_SHAM=m
# CONFIG_CRYPTO_DEV_PICOXCELL is not set
CONFIG_CRYPTO_DEV_QCE=m
CONFIG_CRYPTO_DEV_ROCKCHIP=m
CONFIG_CRYPTO_DEV_S5P=m
CONFIG_CRYPTO_DEV_SAHARA=m
Linux v4.13-6657-g3b9f8ed25dbe
2017-09-07 21:18:25 +00:00
# CONFIG_CRYPTO_DEV_SP_CCP is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRYPTO_DEV_SUN4I_SS=m
Linux v4.13-6657-g3b9f8ed25dbe
2017-09-07 21:18:25 +00:00
CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG=y
Linux v4.9-10415-g73e2e0c
2016-12-16 15:42:31 +00:00
CONFIG_CRYPTO_DEV_VIRTIO=m
Linux v4.12-rc5
2017-06-12 14:49:10 +00:00
CONFIG_CRYPTO_DH=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG_HASH=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_CRYPTO_DRBG_MENU=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_ECDH=m
CONFIG_CRYPTO_ECHAINIV=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_FIPS=y
Linux v4.14-rc2-201-g35dbba31be52
2017-09-29 20:33:41 +00:00
CONFIG_CRYPTO_GCM=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_CRYPTO_GF128MUL=y
Raspberry Pi serial console fixes, minor other Pi improvements, Various ARM cleanups, build mmc/pwrseq non modular
2017-09-11 18:17:30 +00:00
CONFIG_CRYPTO_GHASH_ARM_CE=m
Linux v4.14-rc2-201-g35dbba31be52
2017-09-29 20:33:41 +00:00
CONFIG_CRYPTO_GHASH=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_LZ4HC=m
CONFIG_CRYPTO_LZ4=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_CRYPTO_LZO=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_MD4=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_CRYPTO_MD5=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRYPTO_MICHAEL_MIC=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_CRYPTO_NULL=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_POLY1305=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_CRYPTO_RSA=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRYPTO_SALSA20_586=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SEED=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_CRYPTO_SEQIV=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SHA1_ARM_CE is not set
CONFIG_CRYPTO_SHA1_ARM_NEON=y
CONFIG_CRYPTO_SHA1_ARM=y
CONFIG_CRYPTO_SHA1=y
Linux v4.13-6657-g3b9f8ed25dbe
2017-09-07 21:18:25 +00:00
CONFIG_CRYPTO_SHA256_ARM64=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRYPTO_SHA256_ARM=y
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA2_ARM_CE is not set
CONFIG_CRYPTO_SHA3=m
Linux v4.9-8648-g5cc60ae
2016-12-15 19:27:26 +00:00
CONFIG_CRYPTO_SHA512_ARM64=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRYPTO_SHA512_ARM=y
CONFIG_CRYPTO_SHA512=m
Linux v4.10-rc1 (didn't adjust debug options), ARM config updates, minor general config cleanups
2016-12-27 02:51:37 +00:00
CONFIG_CRYPTO_SIMD=y
Linux v4.14-4050-g37cb8e1f8e10
2017-11-15 17:40:48 +00:00
CONFIG_CRYPTO_SM3=m
Linux v4.16-7248-g06dd3dfeea60
2018-04-05 17:30:09 +00:00
CONFIG_CRYPTO_SM4=m
CONFIG_CRYPTO_SPECK=m
CONFIG_CRYPTO_SPECK_NEON=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_RNG=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_VMAC=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_XCBC=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_CRYPTO_XTS=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_CRYPTO=y
# CONFIG_CS89x0 is not set
# CONFIG_CUSE is not set
CONFIG_CW1200=m
CONFIG_CW1200_WLAN_SDIO=m
CONFIG_CW1200_WLAN_SPI=m
Linux v4.16-5456-g17dec0a94915
2018-04-04 17:45:22 +00:00
CONFIG_CXD2880_SPI_DRV=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_CX_ECAT is not set
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_DA280=m
CONFIG_DA311=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DA9052_WATCHDOG=m
CONFIG_DA9055_WATCHDOG=m
CONFIG_DAVICOM_PHY=m
Linux v4.16-11490-gb284d4d5a678
2018-04-11 16:12:16 +00:00
CONFIG_DAX=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DCB=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_DDR=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DE2104X_DSL=0
CONFIG_DE2104X=m
CONFIG_DE4X5=m
CONFIG_DE_AOC=y
# CONFIG_DEBUG_ALIGN_RODATA is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_BLK_CGROUP is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_DEBUG_HIGHMEM=y
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_DEBUG_INFO_VTA=y
CONFIG_DEBUG_INFO=y
Linux v4.14-12375-g2dcd9c71c1ff
2017-11-18 01:09:35 +00:00
# CONFIG_DEBUG_KERNEL_DC is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_KMEMLEAK_TEST is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_KOBJECT_RELEASE is not set
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_LL is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_DEBUG_NX_TEST=m
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_PINCTRL is not set
Linux v4.10-1242-g9763dd6
2017-02-21 19:21:44 +00:00
# CONFIG_DEBUG_REFCOUNT is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_RT_MUTEXES is not set
Linux v4.16-10608-gf8cf2f16a7c9
2018-04-09 16:22:00 +00:00
# CONFIG_DEBUG_RWSEMS is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
# CONFIG_DEBUG_SG is not set
CONFIG_DEBUG_SHIRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_VM_PGFLAGS is not set
# CONFIG_DEBUG_VM_RB is not set # revisit this if performance isn't horrible
# CONFIG_DEBUG_VM_VMACACHE is not set
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
Linux v4.16-10608-gf8cf2f16a7c9
2018-04-09 16:22:00 +00:00
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
Linux v4.15-10668-g35277995e179
2018-02-05 18:54:33 +00:00
CONFIG_DEBUG_WX=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_DECNET is not set
CONFIG_DEFAULT_CFQ=y
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_DEFXX is not set
# CONFIG_DEPRECATED_PARAM_STRUCT is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_DEV_APPLETALK is not set
Linux v4.10-rc1 (didn't adjust debug options), ARM config updates, minor general config cleanups
2016-12-27 02:51:37 +00:00
CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU=y
Linux v4.10-rc1 (didn't adjust debug options), ARM config updates, minor general config cleanups
2016-12-27 02:51:37 +00:00
CONFIG_DEVFREQ_EVENT_ROCKCHIP_DFI=m
CONFIG_DEVFREQ_GOV_PASSIVE=m
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DEVFREQ_THERMAL=y
# CONFIG_DEVKMEM is not set
CONFIG_DEVMEM=y
reenable CONFIG_DEVPORT
2017-07-18 17:17:57 +00:00
CONFIG_DEVPORT=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_DEVTMPFS=y
# CONFIG_DGAP is not set
# CONFIG_DGNC is not set
CONFIG_DHT11=m
CONFIG_DL2K=m
CONFIG_DLM_DEBUG=y
CONFIG_DLM=m
# CONFIG_DM9000 is not set
CONFIG_DM9102=m
# CONFIG_DMA_API_DEBUG is not set
CONFIG_DMA_BCM2835=m
# CONFIG_DMA_CACHE_RWFO is not set
CONFIG_DMA_CMA=y
# CONFIG_DMADEVICES_DEBUG is not set
# CONFIG_DMADEVICES_VDEBUG is not set
CONFIG_DMADEVICES=y
CONFIG_DMA_ENGINE=y
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
# CONFIG_DMA_FENCE_TRACE is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DMA_OF=y
CONFIG_DMA_OMAP=m
# CONFIG_DMARD06 is not set
# CONFIG_DMARD09 is not set
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_DMARD10=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DMA_SUN4I=m
CONFIG_DMA_SUN6I=m
# CONFIG_DMATEST is not set
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DM_CACHE_CLEANER=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_CRYPT=m
Linux v4.9-8648-g5cc60ae
2016-12-15 19:27:26 +00:00
CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_DEBUG=y
CONFIG_DM_DELAY=m
# CONFIG_DM_ERA is not set
CONFIG_DM_FLAKEY=m
Minor updates for ARM
2017-07-13 16:06:15 +00:00
CONFIG_DMIID=y
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
CONFIG_DM_INTEGRITY=m
Minor updates for ARM
2017-07-13 16:06:15 +00:00
CONFIG_DMI_SYSFS=y
CONFIG_DMI=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_LOG_WRITES=m
CONFIG_DM_MIRROR=y
# CONFIG_DM_MQ_DEFAULT is not set
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_RAID=m
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_SWITCH=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_UEVENT=y
Linux v4.15-6064-g255442c93843
2018-02-01 21:50:49 +00:00
CONFIG_DM_UNSTRIPED=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DM_VERITY_FEC=y
CONFIG_DM_VERITY=m
CONFIG_DM_ZERO=y
Linux v4.12-7934-g9f45efb
2017-07-07 14:59:21 +00:00
CONFIG_DM_ZONED=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DNET=m
CONFIG_DNOTIFY=y
CONFIG_DNS_RESOLVER=m
CONFIG_DOVE_THERMAL=m
CONFIG_DP83640_PHY=m
Linux v4.14-9248-ge60e1ee60630
2017-11-16 17:50:37 +00:00
CONFIG_DP83822_PHY=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DP83848_PHY=m
cleanup some deprecated options, minor arm config tweaks
2017-09-24 14:23:59 +00:00
# CONFIG_DP83867_PHY is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_DPM_WATCHDOG is not set # revisit this in debug
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_DPOT_DAC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DRAGONRISE_FF=y
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_DRM_AMD_ACP=y
Linux v4.14-12375-g2dcd9c71c1ff
2017-11-18 01:09:35 +00:00
# CONFIG_DRM_AMD_DC_FBC is not set
# CONFIG_DRM_AMD_DC_PRE_VEGA is not set
CONFIG_DRM_AMD_DC=y
enable CONFIG_DRM_AMDGPU_CIK (rhbz 1472858)
2017-07-19 18:07:37 +00:00
CONFIG_DRM_AMDGPU_CIK=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set
CONFIG_DRM_AMDGPU=m
enable CONFIG_DRM_AMDGPU_SI so that Southern Island devices work with amdgpu & radv
2018-02-15 22:22:54 +00:00
CONFIG_DRM_AMDGPU_SI=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DRM_AMDGPU_USERPTR=y
CONFIG_DRM_AMD_POWERPLAY=y
CONFIG_DRM_ANALOGIX_ANX78XX=m
CONFIG_DRM_ANALOGIX_DP=m
# CONFIG_DRM_ARCPGU is not set
CONFIG_DRM_ARMADA=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_DRM_AST=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DRM_BOCHS=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_DRM_CIRRUS_QEMU=m
Linux v4.10-9579-gf1ef09f Includes config options from yesterday that were missed
2017-02-24 16:50:29 +00:00
# CONFIG_DRM_DEBUG_MM_SELFTEST is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DRM_DP_AUX_CHARDEV=y
Linux v4.10-rc1 (didn't adjust debug options), ARM config updates, minor general config cleanups
2016-12-27 02:51:37 +00:00
CONFIG_DRM_DUMB_VGA_DAC=m
Minor ARM config updates
2017-07-17 09:23:40 +00:00
CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
Linux v4.13-4257-ge7d0c41ecc2e
2017-09-06 18:29:50 +00:00
CONFIG_DRM_DW_HDMI_CEC=m
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_DRM_DW_HDMI_I2S_AUDIO=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DRM_DW_HDMI=m
CONFIG_DRM_ETNAVIV=m
# CONFIG_DRM_ETNAVIV_REGISTER_LOGGING is not set
Linux v4.15-9939-g4bf772b14675
2018-02-02 20:38:32 +00:00
CONFIG_DRM_ETNAVIV_THERMAL=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DRM_EXYNOS5433_DECON=y
CONFIG_DRM_EXYNOS7_DECON=y
CONFIG_DRM_EXYNOS_DPI=y
CONFIG_DRM_EXYNOS_DP=y
CONFIG_DRM_EXYNOS_DSI=y
CONFIG_DRM_EXYNOS_FIMD=y
CONFIG_DRM_EXYNOS_G2D=y
CONFIG_DRM_EXYNOS_HDMI=y
fix nouveau on Tegra, Enable IOMMU on Exynos
2018-04-12 07:25:54 +00:00
CONFIG_DRM_EXYNOS_IOMMU=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DRM_EXYNOS=m
CONFIG_DRM_EXYNOS_MIC=y
CONFIG_DRM_EXYNOS_MIXER=y
CONFIG_DRM_EXYNOS_VIDI=y
CONFIG_DRM_FBDEV_EMULATION=y
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
CONFIG_DRM_FBDEV_OVERALLOC=100
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_DRM_FSL_DCU is not set
CONFIG_DRM_HDLCD=m
# CONFIG_DRM_HDLCD_SHOW_UNDERRUN is not set
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_DRM_HISI_HIBMC=m
CONFIG_DRM_I2C_ADV7511_AUDIO=y
Filter GPU bridge drivers on all arches, re-enable adv7511
2018-01-29 22:28:36 +00:00
CONFIG_DRM_I2C_ADV7511_CEC=y
CONFIG_DRM_I2C_ADV7511=m
Enable ADV7533 sub module
2017-04-21 10:28:15 +00:00
CONFIG_DRM_I2C_ADV7533=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_NXP_TDA998X=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_IMX_HDMI=m
CONFIG_DRM_IMX_IPUV3=m
CONFIG_DRM_IMX_LDB=m
CONFIG_DRM_IMX=m
CONFIG_DRM_IMX_PARALLEL_DISPLAY=m
CONFIG_DRM_IMX_TVE=m
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
Updates for ARM devices, Build ARM Chromebook specifics on all ARM architectures
2017-05-29 10:10:21 +00:00
CONFIG_DRM_LVDS_ENCODER=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DRM=m
CONFIG_DRM_MALI_DISPLAY=m
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
Enable HDMI on Amlogic Meson SoCs
2017-06-29 17:18:56 +00:00
CONFIG_DRM_MESON_DW_HDMI=m
Update Amlogic meson support
2017-04-03 19:29:35 +00:00
CONFIG_DRM_MESON=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_DRM_MGAG200=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_DRM_MGA is not set
Linux v4.16-2520-g642e7fd23353
2018-04-03 17:18:00 +00:00
CONFIG_DRM_MSM_DSI_10NM_PHY=y
Config improvements for Qualcomm devices
2017-06-26 22:32:58 +00:00
CONFIG_DRM_MSM_DSI_14NM_PHY=y
CONFIG_DRM_MSM_DSI_20NM_PHY=y
CONFIG_DRM_MSM_DSI_28NM_8960_PHY=y
CONFIG_DRM_MSM_DSI_28NM_PHY=y
CONFIG_DRM_MSM_DSI_PLL=y
CONFIG_DRM_MSM_DSI=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DRM_MSM_HDMI_HDCP=y
CONFIG_DRM_MSM=m
# CONFIG_DRM_MSM_REGISTER_LOGGING is not set
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_DRM_MXSFB=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_NOUVEAU=m
- Enable Tiny DRM on ARM platforms - ARM config updates - General config cleanups - Add patch to fix desktop lockups on RPi (vc4) RHBZ# 1389163
2017-03-01 12:12:17 +00:00
CONFIG_DRM_NXP_PTN3460=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV=m
CONFIG_DRM_OMAP_CONNECTOR_DVI=m
CONFIG_DRM_OMAP_CONNECTOR_HDMI=m
CONFIG_DRM_OMAP_ENCODER_OPA362=m
CONFIG_DRM_OMAP_ENCODER_TFP410=m
CONFIG_DRM_OMAP_ENCODER_TPD12S015=m
CONFIG_DRM_OMAP=m
CONFIG_DRM_OMAP_NUM_CRTCS=2
CONFIG_DRM_OMAP_PANEL_DPI=m
CONFIG_DRM_OMAP_PANEL_DSI_CM=m
CONFIG_DRM_OMAP_PANEL_LGPHILIPS_LB035Q02=m
CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11=m
CONFIG_DRM_OMAP_PANEL_SHARP_LS037V7DW01=m
CONFIG_DRM_OMAP_PANEL_SONY_ACX565AKM=m
CONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1=m
CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=m
Linux v4.16-2520-g642e7fd23353
2018-04-03 17:18:00 +00:00
CONFIG_DRM_PANEL_ARM_VERSATILE=m
Linux v4.15-9939-g4bf772b14675
2018-02-02 20:38:32 +00:00
CONFIG_DRM_PANEL_ILITEK_IL9322=m
Linux v4.12-10317-gaf3c8d9
2017-07-10 15:40:53 +00:00
# CONFIG_DRM_PANEL_INNOLUX_P079ZCA is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set
CONFIG_DRM_PANEL_LG_LG4573=m
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
CONFIG_DRM_PANEL_LVDS=m
Linux v4.14-9248-ge60e1ee60630
2017-11-16 17:50:37 +00:00
CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=m
Linux v4.14-9248-ge60e1ee60630
2017-11-16 17:50:37 +00:00
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m
Linux v4.16-2520-g642e7fd23353
2018-04-03 17:18:00 +00:00
CONFIG_DRM_PANEL_RAYDIUM_RM68200=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=m
Linux v4.14-9248-ge60e1ee60630
2017-11-16 17:50:37 +00:00
CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
Linux v4.14-9248-ge60e1ee60630
2017-11-16 17:50:37 +00:00
CONFIG_DRM_PANEL_SEIKO_43WVF1G=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=m
CONFIG_DRM_PANEL_SIMPLE=m
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DRM_PANEL=y
- Enable Tiny DRM on ARM platforms - ARM config updates - General config cleanups - Add patch to fix desktop lockups on RPi (vc4) RHBZ# 1389163
2017-03-01 12:12:17 +00:00
CONFIG_DRM_PARADE_PS8622=m
Linux v4.12-10317-gaf3c8d9
2017-07-10 15:40:53 +00:00
CONFIG_DRM_PL111=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DRM_QXL=m
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_USERPTR=y
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
# CONFIG_DRM_RCAR_DW_HDMI is not set
Linux v4.16-2520-g642e7fd23353
2018-04-03 17:18:00 +00:00
# CONFIG_DRM_RCAR_LVDS is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DRM_ROCKCHIP=m
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_SII902X is not set
Linux v4.14-9248-ge60e1ee60630
2017-11-16 17:50:37 +00:00
CONFIG_DRM_SII9234=m
Turn off CONFIG_DRM_SIL_SII8620 since it has strange dependencies
2017-11-16 19:16:17 +00:00
# CONFIG_DRM_SIL_SII8620 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_DRM_SIS is not set
Enable STi DRM driver
2017-04-02 10:26:39 +00:00
CONFIG_DRM_STI=m
Linux v4.12-10317-gaf3c8d9
2017-07-10 15:40:53 +00:00
# CONFIG_DRM_STM is not set
Minor updates for ARM
2017-07-13 16:06:15 +00:00
CONFIG_DRM_SUN4I_BACKEND=m
Minor updates for sun4i drm drivers
2017-12-04 22:22:54 +00:00
CONFIG_DRM_SUN4I_HDMI_CEC=y
Minor updates for ARM
2017-07-13 16:06:15 +00:00
CONFIG_DRM_SUN4I_HDMI=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DRM_SUN4I=m
Linux v4.16-2520-g642e7fd23353
2018-04-03 17:18:00 +00:00
CONFIG_DRM_SUN8I_DW_HDMI=m
Minor updates for ARM
2017-07-13 16:06:15 +00:00
CONFIG_DRM_SUN8I_MIXER=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_TEGRA_DEBUG is not set
CONFIG_DRM_TEGRA=m
CONFIG_DRM_TEGRA_STAGING=y
CONFIG_DRM_TILCDC=m
CONFIG_DRM_TILCDC_SLAVE_COMPAT=y
- Enable Tiny DRM on ARM platforms - ARM config updates - General config cleanups - Add patch to fix desktop lockups on RPi (vc4) RHBZ# 1389163
2017-03-01 12:12:17 +00:00
CONFIG_DRM_TINYDRM=m
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_DRM_TI_TFP410=m
Updates for ARM devices, Build ARM Chromebook specifics on all ARM architectures
2017-05-29 10:10:21 +00:00
CONFIG_DRM_TOSHIBA_TC358767=m
Linux v4.14-9248-ge60e1ee60630
2017-11-16 17:50:37 +00:00
CONFIG_DRM_TVE200=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DRM_UDL=m
Linux v4.13-rc2
2017-07-24 15:56:42 +00:00
# CONFIG_DRM_VBOXVIDEO is not set
Linux v4.13-4257-ge7d0c41ecc2e
2017-09-06 18:29:50 +00:00
CONFIG_DRM_VC4_HDMI_CEC=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DRM_VC4=m
CONFIG_DRM_VGEM=m
CONFIG_DRM_VIA=m
CONFIG_DRM_VIRTIO_GPU=m
# CONFIG_DS1682 is not set
# CONFIG_DS1803 is not set
Linux v4.14-2229-g894025f24bd0
2017-11-14 18:23:09 +00:00
# CONFIG_DS4424 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_DT3155 is not set
CONFIG_DTC=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_DUMMY_CONSOLE=y
# CONFIG_DUMMY_IRQ is not set
CONFIG_DUMMY=m
Linux v4.10-rc2-183-gc433eb7
2017-01-05 22:23:36 +00:00
CONFIG_DVB_AS102=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
CONFIG_DVB_B2C2_FLEXCOP=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
CONFIG_DVB_B2C2_FLEXCOP_USB=m
CONFIG_DVB_BT8XX=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_PATCH=m
CONFIG_DVB_CORE=m
Linux v4.16-5456-g17dec0a94915
2018-04-04 17:45:22 +00:00
CONFIG_DVB_CXD2099=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DVB_DDBRIDGE=m
Linux v4.13-9219-g015a9e66b9b8
2017-09-08 22:21:55 +00:00
# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set
Linux v4.9-11744-gb0b3a37
2016-12-19 21:11:15 +00:00
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DVB_DM1105=m
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_MAX_ADAPTERS=8
Linux v4.15-11704-ga2e5790d8416
2018-02-07 15:13:24 +00:00
# CONFIG_DVB_MMAP is not set
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DVB_NETUP_UNIDVB=m
CONFIG_DVB_NET=y
CONFIG_DVB_NGENE=m
# CONFIG_DVB_PLATFORM_DRIVERS is not set
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_PT1=m
# CONFIG_DVB_PT3 is not set
# CONFIG_DVB_RTL2832_SDR is not set
CONFIG_DVB_SMIPCIE=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
Linux v4.15-11704-ga2e5790d8416
2018-02-07 15:13:24 +00:00
# CONFIG_DVB_ULE_DEBUG is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_CXUSB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_DIB0700=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_DVBSKY=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_FRIIO=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_OPERA1=m
# CONFIG_DVB_USB_PCTV452E is not set
CONFIG_DVB_USB_RTL28XXU=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_VP7045=m
Linux v4.10-2512-g7bb0338
2017-02-22 15:39:25 +00:00
CONFIG_DVB_USB_ZD1301=m
Linux v4.16-11490-gb284d4d5a678
2018-04-11 16:12:16 +00:00
# CONFIG_DW_AXI_DMAC is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_DW_DMAC_BIG_ENDIAN_IO is not set
CONFIG_DW_DMAC_CORE=m
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=m
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
# CONFIG_DWMAC_DWC_QOS_ETH is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DWMAC_GENERIC=m
Update AllWinner configs
2017-04-04 16:15:55 +00:00
CONFIG_DWMAC_IPQ806X=m
Enable Amlogic (meson) SoCs for ARMv7/aarch64
2016-12-27 04:15:07 +00:00
CONFIG_DWMAC_MESON=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DWMAC_ROCKCHIP=m
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_DWMAC_STI=m
Rebase AllWinner sun8i emac driver to latest proposed upstream
2017-03-20 09:46:22 +00:00
CONFIG_DWMAC_SUN8I=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_DWMAC_SUNXI=m
CONFIG_DW_WATCHDOG=m
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_E1000E=m
CONFIG_E1000=m
CONFIG_E100=m
CONFIG_EARLY_PRINTK_DBGP=y
Linux v4.11-1464-gd3b5d35
2017-05-02 19:04:44 +00:00
CONFIG_EARLY_PRINTK_USB_XDBC=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_EARLY_PRINTK=y
# CONFIG_EBC_C384_WDT is not set
CONFIG_ECHO=m
CONFIG_ECRYPT_FS=m
# CONFIG_ECRYPT_FS_MESSAGING is not set
# CONFIG_EDAC_DEBUG is not set
Linux v4.11-1464-gd3b5d35
2017-05-02 19:04:44 +00:00
CONFIG_EDAC_GHES=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_EDAC_HIGHBANK_L2=m
CONFIG_EDAC_HIGHBANK_MC=m
CONFIG_EDAC_LEGACY_SYSFS=y
CONFIG_EDAC_MV64X60=m
CONFIG_EDAC_SYNOPSYS=m
CONFIG_EDAC=y
CONFIG_EEPROM_93CX6=m
CONFIG_EEPROM_93XX46=m
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=m
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
CONFIG_EEPROM_IDT_89HPESX=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
# CONFIG_EFI_ALLOW_SECURE_BOOT_EXIT is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
CONFIG_EFI_PARTITION=y
# CONFIG_EFI_PGT_DUMP is not set
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
# CONFIG_EFI_SECURE_BOOT_LOCK_DOWN is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_EFI_SIGNATURE_LIST_PARSER is not set
# CONFIG_EFI_TEST is not set
CONFIG_EFIVAR_FS=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS=y
CONFIG_EFI=y
# CONFIG_EFS_FS is not set
CONFIG_EMAC_ROCKCHIP=m
# CONFIG_EMBEDDED is not set
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENC28J60=m
CONFIG_ENCLOSURE_SERVICES=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_ENCRYPTED_KEYS=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_ENIC=m
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_ENVELOPE_DETECTOR=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_EPIC100=m
CONFIG_EPOLL=y
CONFIG_EQUALIZER=m
CONFIG_ET131X=m
CONFIG_ETHERNET=y
CONFIG_ETHOC=m
# CONFIG_EUROTECH_WDT is not set
# CONFIG_EVM is not set
# CONFIG_EXOFS_DEBUG is not set
# CONFIG_EXOFS_FS is not set
# CONFIG_EXPERT is not set
CONFIG_EXPORTFS=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_EXT4_ENCRYPTION=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXTCON_ADC_JACK=m
CONFIG_EXTCON_AXP288=m
CONFIG_EXTCON_GPIO=m
# CONFIG_EXTCON_MAX3355 is not set
CONFIG_EXTCON_MAX8997=m
CONFIG_EXTCON_PALMAS=m
minor QCom config cleanups
2017-07-02 12:04:25 +00:00
CONFIG_EXTCON_QCOM_SPMI_MISC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_EXTCON_RT8973A is not set
# CONFIG_EXTCON_SM5502 is not set
Linux v4.13-4257-ge7d0c41ecc2e
2017-09-06 18:29:50 +00:00
CONFIG_EXTCON_USBC_CROS_EC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_EXTCON_USB_GPIO=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_EXTCON=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_EXTRA_FIRMWARE=""
CONFIG_EXYNOS5420_MCPM=y
CONFIG_EXYNOS_ADC=m
CONFIG_EXYNOS_AUDSS_CLK_CON=m
# CONFIG_EXYNOS_IOMMU_DEBUG is not set
fix nouveau on Tegra, Enable IOMMU on Exynos
2018-04-12 07:25:54 +00:00
CONFIG_EXYNOS_IOMMU=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_EXYNOS_THERMAL=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_EZNPS_GIC is not set
minor cleanup of some of the MFD and associated options (NFC)
2016-06-30 12:53:25 +00:00
# CONFIG_EZX_PCAP is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
# CONFIG_F2FS_FS_ENCRYPTION is not set
CONFIG_F2FS_FS=m
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
CONFIG_F2FS_FS_XATTR=y
# CONFIG_F2FS_IO_TRACE is not set
CONFIG_F2FS_STAT_FS=y
# CONFIG_FAIL_FUTEX is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_FANOTIFY=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_FAT_FS=m
# CONFIG_FAULT_INJECTION is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_ARK is not set
CONFIG_FB_ARMCLCD=y
# CONFIG_FB_ASILIANT is not set
CONFIG_FB_ATY128_BACKLIGHT=y
# CONFIG_FB_ATY128 is not set
CONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_ATY_CT is not set
# CONFIG_FB_ATY_GX is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_DA8XX is not set
CONFIG_FB_EFI=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_IMX is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_MATROX_G is not set
# CONFIG_FB_MATROX_I2C is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_MATROX_MILLENIUM is not set
# CONFIG_FB_MATROX_MYSTIQUE is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_METRONOME is not set
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_FB_MODE_HELPERS=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_FB_MX3 is not set
CONFIG_FB_MXS=m
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_NVIDIA_DEBUG is not set
# CONFIG_FB_NVIDIA_I2C is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_PRE_INIT_FB is not set
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_RADEON_I2C is not set
# CONFIG_FB_RADEON is not set
CONFIG_FB_RIVA_BACKLIGHT=y
# CONFIG_FB_RIVA_DEBUG is not set
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_S3C is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
CONFIG_FB_SIMPLE=y
# CONFIG_FB_SIS is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SM712 is not set
# CONFIG_FB_SM750 is not set
# CONFIG_FB_SMSCUFX is not set
CONFIG_FB_SSD1307=m
# CONFIG_FB_TFT is not set
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_TMIO is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_VIRTUAL=m
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_XGI is not set
# CONFIG_FB_XILINX is not set
CONFIG_FB=y
CONFIG_FCOE_FNIC=m
CONFIG_FCOE=m
# CONFIG_FDDI is not set
CONFIG_FEALNX=m
CONFIG_FEC=m
CONFIG_FHANDLE=y
Linux v4.15-11704-ga2e5790d8416
2018-02-07 15:13:24 +00:00
# CONFIG_FIND_BIT_BENCHMARK is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_FIREWIRE is not set
CONFIG_FIREWIRE_NET=m
CONFIG_FIREWIRE_NOSY=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
# CONFIG_FIREWIRE_SERIAL is not set
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_FIXED_PHY=y
CONFIG_FM10K=m
CONFIG_FMC_CHARDEV=m
CONFIG_FMC_FAKEDEV=m
CONFIG_FMC=m
CONFIG_FMC_TRIVIAL=m
CONFIG_FMC_WRITE_EEPROM=m
# CONFIG_FONTS is not set
CONFIG_FORCEDETH=m
CONFIG_FORCE_MAX_ZONEORDER=11
Linux v4.12-11618-gb86faee6d111
2017-07-14 15:44:07 +00:00
CONFIG_FORTIFY_SOURCE=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_FPGA is not set
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAME_POINTER=y
CONFIG_FRAME_WARN=1024
CONFIG_FRONTSWAP=y
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
CONFIG_FSCACHE=m
CONFIG_FSCACHE_OBJECT_LIST=y
CONFIG_FSCACHE_STATS=y
CONFIG_FS_DAX=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_FS_ENCRYPTION=y
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
CONFIG_FSI=m
Linux v4.12-3441-g1996454
2017-07-05 16:00:04 +00:00
CONFIG_FSI_MASTER_GPIO=m
CONFIG_FSI_MASTER_HUB=m
CONFIG_FSI_SCOM=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_FSL_EDMA is not set
# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_FSL_XGMAC_MDIO is not set
CONFIG_FS_MBCACHE=y
CONFIG_FSNOTIFY=y
# CONFIG_FTL is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_FTRACE=y
Linux v4.15-11930-g581e400ff935
2018-02-08 19:35:33 +00:00
# CONFIG_FTWDT010_WATCHDOG is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_FUNCTION_GRAPH_TRACER is not set
CONFIG_FUNCTION_PROFILER=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUSE_FS=m
CONFIG_FUSION_CTL=m
CONFIG_FUSION_FC=m
# CONFIG_FUSION is not set
CONFIG_FUSION_LAN=m
CONFIG_FUSION_LOGGING=y
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_SAS=m
CONFIG_FUSION_SPI=m
CONFIG_FUTEX=y
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
CONFIG_FW_CFG_SYSFS=m
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# CONFIG_FW_LOADER_USER_HELPER is not set
CONFIG_FW_LOADER=y
CONFIG_GACT_PROB=y
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
CONFIG_GAMEPORT_L4=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_GAMEPORT=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_GAMEPORT_NS558=m
# CONFIG_GCC_PLUGINS is not set
# CONFIG_GCOV_KERNEL is not set
# CONFIG_GDB_SCRIPTS is not set
CONFIG_GENERIC_ADC_BATTERY=m
# CONFIG_GENERIC_ADC_THERMAL is not set
Linux v4.12-3441-g1996454
2017-07-05 16:00:04 +00:00
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PINCONF=y
CONFIG_GENEVE=m
# CONFIG_GEN_RTC is not set
# CONFIG_GENWQE is not set
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_GFS2_FS=m
# CONFIG_GIANFAR is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_DEBUG is not set
CONFIG_GIGASET_M101=m
CONFIG_GIGASET_M105=m
# CONFIG_GLOB_SELFTEST is not set
# CONFIG_GOLDFISH is not set
# CONFIG_GOOGLE_FIRMWARE is not set
# CONFIG_GP2AP020A00F is not set
# CONFIG_GPIO_104_DIO_48E is not set
# CONFIG_GPIO_104_IDIO_16 is not set
CONFIG_GPIO_74X164=m
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ADNP is not set
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_AMDPT is not set
Linux v4.10-rc1 (didn't adjust debug options), ARM config updates, minor general config cleanups
2016-12-27 02:51:37 +00:00
CONFIG_GPIO_AXP209=m
Linux v4.13-9219-g015a9e66b9b8
2017-09-08 22:21:55 +00:00
CONFIG_GPIO_BD9571MWV=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_GPIO_BT8XX is not set
CONFIG_GPIO_DA9052=m
CONFIG_GPIO_DA9055=m
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_DWAPB=m
Linux v4.10-9579-gf1ef09f Includes config options from yesterday that were missed
2017-02-24 16:50:29 +00:00
CONFIG_GPIO_EXAR=m
Linux v4.11-8539-gaf82455
2017-05-05 18:07:47 +00:00
# CONFIG_GPIO_FTGPIO010 is not set
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_GENERIC=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_GPIO_GRGPIO is not set
Linux v4.16-9576-g38c23685b273
2018-04-06 17:00:21 +00:00
# CONFIG_GPIO_HLWD is not set
Only enable GPIO_IT87 on x86, it's not used on other arches
2017-08-22 10:22:25 +00:00
# CONFIG_GPIO_IT87 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_GPIOLIB=y
Linux v4.14-4050-g37cb8e1f8e10
2017-11-15 17:40:48 +00:00
# CONFIG_GPIO_MAX3191X is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_GPIO_MAX7300 is not set
CONFIG_GPIO_MAX7301=m
# CONFIG_GPIO_MAX732X is not set
Linux v4.14-4050-g37cb8e1f8e10
2017-11-15 17:40:48 +00:00
# CONFIG_GPIO_MB86S7X is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_GPIO_MC33880=m
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_MPC8XXX is not set
CONFIG_GPIO_MVEBU=y
CONFIG_GPIO_OMAP=y
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCF857X=m
# CONFIG_GPIO_PCH is not set
Linux v4.15-6064-g255442c93843
2018-02-01 21:50:49 +00:00
# CONFIG_GPIO_PCIE_IDIO_24 is not set
Linux v4.10-9579-gf1ef09f Includes config options from yesterday that were missed
2017-02-24 16:50:29 +00:00
CONFIG_GPIO_PCI_IDIO_16=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_GPIO_PISOSR is not set
CONFIG_GPIO_PL061=y
Add RPi3 GPIO expander, RPi fixes, OMAP serial update, general ARM fixes
2018-03-03 22:51:13 +00:00
CONFIG_GPIO_RASPBERRYPI_EXP=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_GPIO_RDC321X is not set
# CONFIG_GPIO_SCH311X is not set
CONFIG_GPIO_STMPE=y
# CONFIG_GPIO_SX150X is not set
CONFIG_GPIO_SYSCON=m
Linux v4.10-rc1 (didn't adjust debug options), ARM config updates, minor general config cleanups
2016-12-27 02:51:37 +00:00
# CONFIG_GPIO_SYSFS is not set
Linux v4.14-4050-g37cb8e1f8e10
2017-11-15 17:40:48 +00:00
# CONFIG_GPIO_TEGRA186 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_GPIO_TEGRA=y
# CONFIG_GPIO_TPIC2810 is not set
Linux v4.10-rc1 (didn't adjust debug options), ARM config updates, minor general config cleanups
2016-12-27 02:51:37 +00:00
CONFIG_GPIO_TPS65218=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
CONFIG_GPIO_TPS65912=m
Linux v4.13-9219-g015a9e66b9b8
2017-09-08 22:21:55 +00:00
CONFIG_GPIO_TPS68470=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_GPIO_TS4800=m
# CONFIG_GPIO_TS4900 is not set
# CONFIG_GPIO_TS5500 is not set
CONFIG_GPIO_TWL4030=m
CONFIG_GPIO_TWL6040=m
CONFIG_GPIO_VIPERBOARD=m
CONFIG_GPIO_WATCHDOG=m
Linux v4.16-9576-g38c23685b273
2018-04-06 17:00:21 +00:00
# CONFIG_GPIO_WINBOND is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_GPIO_WM8994=m
# CONFIG_GPIO_WS16C48 is not set
CONFIG_GPIO_XILINX=y
Linux v4.12-10317-gaf3c8d9
2017-07-10 15:40:53 +00:00
# CONFIG_GPIO_XRA1403 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_GPIO_ZEVIO is not set
CONFIG_GPIO_ZYNQ=m
CONFIG_GREENASIA_FF=y
# CONFIG_GREYBUS is not set
CONFIG_GS_FPGABOOT=m
CONFIG_GTP=m
Linux v4.14-12891-gc8a0739b185d Also turn off a powerpc crypto drive that was failing to compile
2017-11-20 18:00:57 +00:00
# CONFIG_GUP_BENCHMARK is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_HAMACHI=m
Enable CONFIG_HAMRADIO on arm
2017-04-11 20:51:45 +00:00
CONFIG_HAMRADIO=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_HANGCHECK_TIMER=m
CONFIG_HAPPYMEAL=m
Linux v4.15-10668-g35277995e179
2018-02-05 18:54:33 +00:00
CONFIG_HARDENED_USERCOPY_FALLBACK=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_HARDENED_USERCOPY=y
CONFIG_HAVE_ARM_ARCH_TIMER=y
CONFIG_HAVE_ARM_TWD=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
Linux v4.12-rc1-81-gb23afd3
2017-05-17 15:56:05 +00:00
CONFIG_HD44780=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_HDC100X is not set
CONFIG_HDQ_MASTER_OMAP=m
CONFIG_HEADERS_CHECK=y
CONFIG_HERMES_CACHE_FW_ON_INIT=y
# CONFIG_HERMES is not set
CONFIG_HERMES_PRISM=y
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_HFSPLUS_FS_POSIX_ACL is not set
# CONFIG_HI8435 is not set
CONFIG_HIBERNATION=y
CONFIG_HID_A4TECH=m
Linux v4.11-4395-g89c9fea
2017-05-03 17:50:25 +00:00
CONFIG_HID_ACCUTOUCH=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_ACRUX=m
CONFIG_HID_ALPS=m
CONFIG_HID_APPLEIR=m
CONFIG_HID_APPLE=m
disable a number of unused PATA/SATA drivers on ARM, don't build x86 specific drivers on other arches, minor tweaks to other arch specific configs
2017-10-01 18:33:34 +00:00
# CONFIG_HID_ASUS is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_HID_AUREAL=m
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HID_BELKIN=m
CONFIG_HID_BETOP_FF=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CMEDIA=m
CONFIG_HID_CORSAIR=m
Enable HID_CP2112
2017-12-06 11:05:48 +00:00
CONFIG_HID_CP2112=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
Linux v4.16-9576-g38c23685b273
2018-04-06 17:00:21 +00:00
CONFIG_HID_ELAN=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_HID_ELECOM=m
CONFIG_HID_ELO=m
CONFIG_HID_EMS_FF=m
CONFIG_HID_EZKEY=m
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GENERIC=y
CONFIG_HID_GFRM=m
Linux v4.16-9576-g38c23685b273
2018-04-06 17:00:21 +00:00
# CONFIG_HID_GOOGLE_HAMMER is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_HID_GREENASIA=m
CONFIG_HID_GT683R=m
CONFIG_HID_GYRATION=m
CONFIG_HID_HOLTEK=m
CONFIG_HID_ICADE=m
Linux v4.12-10624-g9967468
2017-07-11 15:21:15 +00:00
CONFIG_HID_ITE=m
Linux v4.15-6064-g255442c93843
2018-02-01 21:50:49 +00:00
CONFIG_HID_JABRA=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_HID_KENSINGTON=m
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
CONFIG_HID_LENOVO=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
CONFIG_HID_LOGITECH=m
CONFIG_HID_MAGICMOUSE=y
Linux v4.9-8648-g5cc60ae
2016-12-15 19:27:26 +00:00
CONFIG_HID_MAYFLASH=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
Linux v4.11-4395-g89c9fea
2017-05-03 17:50:25 +00:00
CONFIG_HID_NTI=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_HID_PENMOUNT=m
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PID=y
CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PRIMAX=m
CONFIG_HID_PRODIKEYS=m
CONFIG_HIDRAW=y
Linux v4.12-10624-g9967468
2017-07-11 15:21:15 +00:00
CONFIG_HID_RETRODE=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_HID_RMI=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SENSOR_ACCEL_3D=m
CONFIG_HID_SENSOR_ALS=m
# CONFIG_HID_SENSOR_CUSTOM_SENSOR is not set
CONFIG_HID_SENSOR_DEVICE_ROTATION=m
CONFIG_HID_SENSOR_GYRO_3D=m
CONFIG_HID_SENSOR_HUB=m
Linux v4.11-10603-g13e0988
2017-05-08 17:38:14 +00:00
CONFIG_HID_SENSOR_HUMIDITY=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
CONFIG_HID_SENSOR_INCLINOMETER_3D=m
CONFIG_HID_SENSOR_MAGNETOMETER_3D=m
# CONFIG_HID_SENSOR_PRESS is not set
# CONFIG_HID_SENSOR_PROX is not set
Linux v4.11-10603-g13e0988
2017-05-08 17:38:14 +00:00
CONFIG_HID_SENSOR_TEMP=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_HID_SONY=m
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_UCLOGIC=m
Linux v4.9-8648-g5cc60ae
2016-12-15 19:27:26 +00:00
CONFIG_HID_UDRAW_PS3=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_HID_WACOM=m
CONFIG_HID_WALTOP=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
CONFIG_HID=y
CONFIG_HID_ZEROPLUS=m
CONFIG_HID_ZYDACRON=m
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
CONFIG_HIGH_RES_TIMERS=y
# CONFIG_HIPPI is not set
CONFIG_HISAX_16_3=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_BKM_A4T=y
# CONFIG_HISAX_DEBUG is not set
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_ENTERNOW_PCI=y
CONFIG_HISAX_EURO=y
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_HFC_SX=y
# CONFIG_HISAX_HFCUSB is not set
CONFIG_HISAX_MAX_CARDS=8
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_SENDCOMPLETE=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_TELES_CS=m
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_W6692=y
# CONFIG_HISILICON_IRQ_MBIGEN is not set
Linux v4.14-9248-ge60e1ee60630
2017-11-16 17:50:37 +00:00
CONFIG_HISI_PMU=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_HIST_TRIGGERS=y
# CONFIG_HMC6352 is not set
# CONFIG_HMC_DRV is not set
CONFIG_HOLTEK_FF=y
# CONFIG_HOSTAP is not set
CONFIG_HOTPLUG_CPU=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_PCIE=y
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG=y
# CONFIG_HP03 is not set
# CONFIG_HP206C is not set
# CONFIG_HPFS_FS is not set
# CONFIG_HP_ILO is not set
# CONFIG_HSI is not set
# CONFIG_HSR is not set
# CONFIG_HSU_DMA is not set
# CONFIG_HSU_DMA_PCI is not set
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_HT16K33=m
minor cleanup of some of the MFD and associated options (NFC)
2016-06-30 12:53:25 +00:00
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_I2CPLD is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_HTC_PASIC3 is not set
CONFIG_HT_IRQ=y
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_HTS221=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_HTU21 is not set
CONFIG_HUGETLBFS=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
# CONFIG_HUGETLB_PAGE is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_HVC_DCC is not set
CONFIG_HW_CONSOLE=y
CONFIG_HWLAT_TRACER=y
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_HWMON=y
CONFIG_HW_PERF_EVENTS=y
CONFIG_HWPOISON_INJECT=m
CONFIG_HW_RANDOM_BCM2835=m
Linux v4.15-6064-g255442c93843
2018-02-01 21:50:49 +00:00
CONFIG_HW_RANDOM_EXYNOS=m
Linux v4.13-6657-g3b9f8ed25dbe
2017-09-07 21:18:25 +00:00
CONFIG_HW_RANDOM_IMX_RNGC=m
Enable Amlogic (meson) SoCs for ARMv7/aarch64
2016-12-27 04:15:07 +00:00
CONFIG_HW_RANDOM_MESON=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_HW_RANDOM_MSM=m
CONFIG_HW_RANDOM_MXC_RNGA=m
CONFIG_HW_RANDOM_OMAP3_ROM=m
CONFIG_HW_RANDOM_OMAP=m
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_HW_RANDOM_ST=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_HW_RANDOM_TIMERIOMEM=m
Linux v4.15-6064-g255442c93843
2018-02-01 21:50:49 +00:00
CONFIG_HW_RANDOM_TPM=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_HW_RANDOM=y
CONFIG_HWSPINLOCK_OMAP=m
CONFIG_HWSPINLOCK_QCOM=m
Linux v4.14-12891-gc8a0739b185d Also turn off a powerpc crypto drive that was failing to compile
2017-11-20 18:00:57 +00:00
CONFIG_HWSPINLOCK=y
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
# CONFIG_HX711 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_HYSDN_CAPI=y
CONFIG_HYSDN=m
CONFIG_HZ_1000=y
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
CONFIG_I2C_ALGOPCF=m
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD756_S4882 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
# CONFIG_I2C_BCM2048 is not set
CONFIG_I2C_BCM2835=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CADENCE=m
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CROS_EC_TUNNEL=m
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEMUX_PINCTRL is not set
Linux v4.13-9219-g015a9e66b9b8
2017-09-08 22:21:55 +00:00
CONFIG_I2C_DESIGNWARE_CORE=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_DESIGNWARE_PCI=m
Linux v4.13-9219-g015a9e66b9b8
2017-09-08 22:21:55 +00:00
CONFIG_I2C_DESIGNWARE_PLATFORM=y
Linux v4.12-10985-g4ca6df134847
2017-07-13 14:16:31 +00:00
CONFIG_I2C_DESIGNWARE_SLAVE=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_I2C_DIOLAN_U2C=m
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_EMEV2 is not set
CONFIG_I2C_EXYNOS5=m
Linux v4.15-10668-g35277995e179
2018-02-05 18:54:33 +00:00
# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_I2C_GPIO=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_HID=m
# CONFIG_I2C_I801 is not set
Linux v4.9-10415-g73e2e0c
2016-12-16 15:42:31 +00:00
CONFIG_I2C_IMX_LPI2C=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_I2C_IMX=m
# CONFIG_I2C_ISCH is not set
Enable Amlogic (meson) SoCs for ARMv7/aarch64
2016-12-27 04:15:07 +00:00
CONFIG_I2C_MESON=m
Linux v4.9-10415-g73e2e0c
2016-12-16 15:42:31 +00:00
CONFIG_I2C_MLXCPLD=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_I2C_MUX_GPIO=m
Minor updates for ARM
2017-07-13 16:06:15 +00:00
CONFIG_I2C_MUX_GPMUX=m
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
CONFIG_I2C_MUX_LTC4306=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_I2C_MUX=m
Linux v4.9-10415-g73e2e0c
2016-12-16 15:42:31 +00:00
CONFIG_I2C_MUX_MLXCPLD=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_MUX_PINCTRL=m
CONFIG_I2C_MUX_REG=m
CONFIG_I2C_MV64XXX=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_NFORCE2_S4985 is not set
# CONFIG_I2C_NOMADIK is not set
# CONFIG_I2C_OCORES is not set
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_I2C_OMAP=y
Only build ParPort support on x86, ARM and s390x long disabled it, only PPC HW that shipped it was long prior to anything we remotely support
2017-09-09 14:15:44 +00:00
# CONFIG_I2C_PARPORT_LIGHT is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_PXA=m
# CONFIG_I2C_PXA_SLAVE is not set
CONFIG_I2C_QUP=m
Build in i2c-rk3x to fix some device boot
2017-07-12 17:30:42 +00:00
CONFIG_I2C_RK3X=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
CONFIG_I2C_S3C2410=m
CONFIG_I2C_SI470X=m
# CONFIG_I2C_SI4713 is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_SLAVE_EEPROM=m
CONFIG_I2C_SLAVE=y
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_I2C_ST=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_I2C_STUB=m
CONFIG_I2C_SUN6I_P2WI=m
# CONFIG_I2C_TAOS_EVM is not set
- Enable Tiny DRM on ARM platforms - ARM config updates - General config cleanups - Add patch to fix desktop lockups on RPi (vc4) RHBZ# 1389163
2017-03-01 12:12:17 +00:00
CONFIG_I2C_TEGRA_BPMP=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_I2C_TEGRA=m
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VERSATILE=m
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
CONFIG_I2C_VIPERBOARD=m
CONFIG_I2C_XILINX=m
CONFIG_I2C=y
# CONFIG_I2O is not set
# CONFIG_I40E_DCB is not set
# CONFIG_I40E_FCOE is not set
CONFIG_I40E=m
CONFIG_I40EVF=m
CONFIG_I6300ESB_WDT=m
CONFIG_I82092=m
# CONFIG_IAQCORE is not set
Linux v4.16-5456-g17dec0a94915
2018-04-04 17:45:22 +00:00
CONFIG_ICE=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_ICPLUS_PHY=m
# CONFIG_ICS932S401 is not set
# CONFIG_IDE is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
# CONFIG_IDMA64 is not set
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_IEEE802154_ADF7242=m
# CONFIG_IEEE802154_AT86RF230_DEBUGFS is not set
CONFIG_IEEE802154_AT86RF230=m
CONFIG_IEEE802154_ATUSB=m
Linux v4.11-4395-g89c9fea
2017-05-03 17:50:25 +00:00
# CONFIG_IEEE802154_CA8210_DEBUGFS is not set
CONFIG_IEEE802154_CA8210=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IEEE802154_CC2520=m
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
CONFIG_IEEE802154=m
Linux v4.16-5456-g17dec0a94915
2018-04-04 17:45:22 +00:00
CONFIG_IEEE802154_MCR20A=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IEEE802154_MRF24J40=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
CONFIG_IFB=m
CONFIG_IGB_DCA=y
CONFIG_IGB_HWMON=y
CONFIG_IGB=m
CONFIG_IGBVF=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_IIO_BUFFER_CB=m
Linux v4.15-1549-g6304672b7f0a
2018-01-30 18:26:27 +00:00
CONFIG_IIO_BUFFER_HW_CONSUMER=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IIO_BUFFER=y
CONFIG_IIO_CONFIGFS=m
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
Linux v4.14-2229-g894025f24bd0
2017-11-14 18:23:09 +00:00
CONFIG_IIO_CROS_EC_ACCEL_LEGACY=m
Updates for ARM devices, Build ARM Chromebook specifics on all ARM architectures
2017-05-29 10:10:21 +00:00
CONFIG_IIO_CROS_EC_BARO=m
Linux v4.11-10603-g13e0988
2017-05-08 17:38:14 +00:00
CONFIG_IIO_CROS_EC_LIGHT_PROX=m
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_IIO_CROS_EC_SENSORS_CORE=m
CONFIG_IIO_CROS_EC_SENSORS=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_IIO_HRTIMER_TRIGGER is not set
CONFIG_IIO_INTERRUPT_TRIGGER=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_IIO_KFIFO_BUF=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IIO=m
Minor updates for ARM
2017-07-13 16:06:15 +00:00
CONFIG_IIO_MUX=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_IIO_SIMPLE_DUMMY is not set
# CONFIG_IIO_SSP_SENSORHUB is not set
CONFIG_IIO_ST_ACCEL_3AXIS=m
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m
CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m
CONFIG_IIO_ST_GYRO_3AXIS=m
CONFIG_IIO_ST_GYRO_I2C_3AXIS=m
CONFIG_IIO_ST_GYRO_SPI_3AXIS=m
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
# CONFIG_IIO_ST_LSM6DSX is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IIO_ST_MAGN_3AXIS=m
CONFIG_IIO_ST_PRESS_I2C=m
CONFIG_IIO_ST_PRESS=m
CONFIG_IIO_ST_PRESS_SPI=m
CONFIG_IIO_SW_DEVICE=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_IIO_SW_TRIGGER=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IIO_SYSFS_TRIGGER=m
CONFIG_IIO_TIGHTLOOP_TRIGGER=m
CONFIG_IIO_TRIGGERED_BUFFER=m
CONFIG_IIO_TRIGGER=y
# CONFIG_IKCONFIG is not set
Enable IMA (rhbz 790008)
2018-02-19 18:40:39 +00:00
CONFIG_IMA_APPRAISE_BOOTPARAM=y
Disable IMA appraise (rhbz 1554474) A recent change to the EFI lockdown patch forces IMA policy to be loaded when secureboot is used. Unfortunately, we don't have all the pieces in place to have all components fully signed. Disable appraisal for now until that gets fixed.
2018-03-12 19:12:50 +00:00
# CONFIG_IMA_APPRAISE is not set
Enable IMA (rhbz 790008)
2018-02-19 18:40:39 +00:00
# CONFIG_IMA_BLACKLIST_KEYRING is not set
CONFIG_IMA_KEYRINGS_PERMIT_SIGNED_BY_BUILTIN_OR_SECONDARY=y
# CONFIG_IMA_LOAD_X509 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IMA_LSM_RULES=y
CONFIG_IMA_MEASURE_PCR_IDX=10
Enable IMA (rhbz 790008)
2018-02-19 18:40:39 +00:00
CONFIG_IMA_READ_POLICY=y
CONFIG_IMA_TRUSTED_KEYRING=y
CONFIG_IMA_WRITE_POLICY=y
CONFIG_IMA=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_IMG_ASCII_LCD is not set
CONFIG_IMX2_WDT=m
CONFIG_IMX7D_ADC=m
Linux v4.11-12441-g56868a4
2017-05-10 14:27:12 +00:00
CONFIG_IMX7_PM_DOMAINS=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IMX_DMA=m
CONFIG_IMX_GPCV2=y
CONFIG_IMX_IPUV3_CORE=m
Linux v4.13-11197-gf007cad159e9
2017-09-11 18:05:08 +00:00
CONFIG_IMX_REMOTEPROC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IMX_SDMA=m
CONFIG_IMX_THERMAL=m
CONFIG_IMX_WEIM=y
# CONFIG_INA2XX_ADC is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
CONFIG_INET6_ESP_OFFLOAD=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET_AH=m
CONFIG_INET_DIAG_DESTROY=y
CONFIG_INET_DIAG=m
CONFIG_INET_ESP=m
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
CONFIG_INET_ESP_OFFLOAD=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_INET_IPCOMP=m
Linux v4.9-2682-ge7aa8c2 (missing secure boot as that is being rebased to the new upstream tree
2016-12-13 22:26:04 +00:00
CONFIG_INET_RAW_DIAG=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_INET_TUNNEL=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET=y
Linux v4.10-9579-gf1ef09f Includes config options from yesterday that were missed
2017-02-24 16:50:29 +00:00
# CONFIG_INFINIBAND_BNXT_RE is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
Disable Infiniband/RDMA on ARMv7 as we no longer have userspace tools
2017-08-31 17:35:16 +00:00
# CONFIG_INFINIBAND_CXGB3 is not set
# CONFIG_INFINIBAND_CXGB4 is not set
Linux v4.16-10608-gf8cf2f16a7c9
2018-04-09 16:22:00 +00:00
# CONFIG_INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI is not set
Linux v4.13-4257-ge7d0c41ecc2e
2017-09-06 18:29:50 +00:00
# CONFIG_INFINIBAND_EXP_USER_ACCESS is not set
Disable Infiniband/RDMA on ARMv7 as we no longer have userspace tools
2017-08-31 17:35:16 +00:00
# CONFIG_INFINIBAND_I40IW is not set
# CONFIG_INFINIBAND_IPOIB_CM is not set
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
# CONFIG_INFINIBAND_IPOIB is not set
# CONFIG_INFINIBAND_ISER is not set
# CONFIG_INFINIBAND_ISERT is not set
# CONFIG_INFINIBAND is not set
# CONFIG_INFINIBAND_MTHCA is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_INFINIBAND_NES_DEBUG is not set
Disable Infiniband/RDMA on ARMv7 as we no longer have userspace tools
2017-08-31 17:35:16 +00:00
# CONFIG_INFINIBAND_NES is not set
# CONFIG_INFINIBAND_OCRDMA is not set
# CONFIG_INFINIBAND_ON_DEMAND_PAGING is not set
Enable a few infiniband options (rhbz 1291902)
2018-04-09 19:38:43 +00:00
CONFIG_INFINIBAND_QEDR=m
Disable Infiniband/RDMA on ARMv7 as we no longer have userspace tools
2017-08-31 17:35:16 +00:00
# CONFIG_INFINIBAND_QIB_DCA is not set
# CONFIG_INFINIBAND_QIB is not set
# CONFIG_INFINIBAND_RDMAVT is not set
# CONFIG_INFINIBAND_SRP is not set
# CONFIG_INFINIBAND_SRPT is not set
# CONFIG_INFINIBAND_USER_ACCESS is not set
# CONFIG_INFINIBAND_USER_MAD is not set
# CONFIG_INFINIBAND_USNIC is not set
# CONFIG_INFINIBAND_VMWARE_PVRDMA is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_INFTL is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_INOTIFY_USER=y
CONFIG_INPUT_88PM80X_ONKEY=m
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_ADXL34X is not set
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_ARIZONA_HAPTICS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_ATLAS_BTNS=m
# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
CONFIG_INPUT_AXP20X_PEK=m
# CONFIG_INPUT_BMA150 is not set
CONFIG_INPUT_CM109=m
CONFIG_INPUT_CMA3000_I2C=m
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_DA9052_ONKEY=m
CONFIG_INPUT_DA9055_ONKEY=m
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
CONFIG_INPUT_E3X0_BUTTON=m
# CONFIG_INPUT_EVBUG is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_GP2A=m
CONFIG_INPUT_GPIO_BEEPER=m
# CONFIG_INPUT_GPIO_DECODER is not set
CONFIG_INPUT_GPIO=m
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
CONFIG_INPUT_GPIO_TILT_POLLED=m
CONFIG_INPUT_IDEAPAD_SLIDEBAR=m
# CONFIG_INPUT_IMS_PCU is not set
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_KXTJ9=m
# CONFIG_INPUT_KXTJ9_POLLED_MODE is not set
CONFIG_INPUT_LEDS=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_INPUT_MATRIXKMAP=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_INPUT_MAX8997_HAPTIC=m
CONFIG_INPUT_MC13783_PWRBUTTON=m
CONFIG_INPUT_MISC=y
Updates for ARM devices, Build ARM Chromebook specifics on all ARM architectures
2017-05-29 10:10:21 +00:00
# CONFIG_INPUT_MMA8450 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSE=y
CONFIG_INPUT_PALMAS_PWRBUTTON=m
CONFIG_INPUT_PCF50633_PMU=m
# CONFIG_INPUT_PCF8574 is not set
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_PM8941_PWRKEY=m
CONFIG_INPUT_PM8XXX_VIBRATOR=m
CONFIG_INPUT_PMIC8XXX_PWRKEY=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_PWM_BEEPER=m
Linux v4.14-rc1
2017-09-18 19:14:22 +00:00
# CONFIG_INPUT_PWM_VIBRA is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_INPUT_REGULATOR_HAPTIC is not set
CONFIG_INPUT_RETU_PWRBUTTON=m
Linux v4.13-9219-g015a9e66b9b8
2017-09-08 22:21:55 +00:00
CONFIG_INPUT_RK805_PWRKEY=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_INPUT_SOC_BUTTON_ARRAY=m
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_TABLET=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_INPUT_TPS65218_PWRBUTTON=m
CONFIG_INPUT_TWL4030_PWRBUTTON=m
CONFIG_INPUT_TWL4030_VIBRA=m
CONFIG_INPUT_TWL6040_VIBRA=m
CONFIG_INPUT_UINPUT=m
CONFIG_INPUT_WISTRON_BTNS=m
CONFIG_INPUT_WM831X_ON=m
CONFIG_INPUT=y
CONFIG_INPUT_YEALINK=m
Enable IMA (rhbz 790008)
2018-02-19 18:40:39 +00:00
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_AUDIT=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_INTEL_IDMA64 is not set
Linux v4.14-12375-g2dcd9c71c1ff
2017-11-18 01:09:35 +00:00
CONFIG_INTEL_SOC_PMIC_CHTDC_TI=m
minor cleanup of some of the MFD and associated options (NFC)
2016-06-30 12:53:25 +00:00
# CONFIG_INTEL_SOC_PMIC is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_INTEL_TH is not set
CONFIG_INTEL_XWAY_PHY=m
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_INV_MPU6050_I2C is not set
# CONFIG_INV_MPU6050_IIO is not set
# CONFIG_INV_MPU6050_SPI is not set
cleanup some deprecated options, minor arm config tweaks
2017-09-24 14:23:59 +00:00
CONFIG_IOMMU_DMA=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
CONFIG_IOMMU_IO_PGTABLE_LPAE=y
CONFIG_IOMMU_SUPPORT=y
Linux v4.11-1464-gd3b5d35
2017-05-02 19:04:44 +00:00
CONFIG_IOSCHED_BFQ=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IOSCHED_CFQ=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IO_STRICT_DEVMEM=y
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
Linux v4.15-6064-g255442c93843
2018-02-01 21:50:49 +00:00
CONFIG_IP6_NF_MATCH_SRH=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
Enable CONFIG_IP6_NF_TARGET_NPT (rhbz 1435884)
2018-01-18 16:59:42 +00:00
CONFIG_IP6_NF_TARGET_NPT=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
# CONFIG_IPACK_BUS is not set
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IPC_NS=y
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_IP_DCCP is not set
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP=m
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_POWEROFF=m
Linux v4.14-9248-ge60e1ee60630
2017-11-16 17:50:37 +00:00
# CONFIG_IPMI_PROC_INTERFACE is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_IP_PNP is not set
CONFIG_IPPP_FILTER=y
# CONFIG_IPQ_GCC_4019 is not set
# CONFIG_IPQ_GCC_806X is not set
Linux v4.12-10317-gaf3c8d9
2017-07-10 15:40:53 +00:00
# CONFIG_IPQ_GCC_8074 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_IPQ_LCC_806X is not set
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_IP_SCTP=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
Linux v4.9-2682-ge7aa8c2 (missing secure boot as that is being rebased to the new upstream tree
2016-12-13 22:26:04 +00:00
CONFIG_IP_SET_HASH_IPMAC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IP_SET_HASH_IPMARK=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_MAC=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
Linux v4.10-rc4-78-g4b19a9e
2017-01-17 22:00:18 +00:00
CONFIG_IPV6_GRE=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IPV6_ILA=m
CONFIG_IPV6_MIP6=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_ROUTER_PREF=y
Linux v4.9-2682-ge7aa8c2 (missing secure boot as that is being rebased to the new upstream tree
2016-12-13 22:26:04 +00:00
CONFIG_IPV6_SEG6_HMAC=y
CONFIG_IPV6_SEG6_INLINE=y
CONFIG_IPV6_SEG6_LWTUNNEL=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6=y
CONFIG_IPVLAN=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_FO=m
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_IPV6=y
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS=m
CONFIG_IP_VS_NQ=m
CONFIG_IP_VS_OVF=m
CONFIG_IP_VS_PE_SIP=m
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_SCTP=y
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SH_TAB_BITS=8
CONFIG_IP_VS_TAB_BITS=12
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_WRR=m
Enable CONFIG_NET_L3_MASTER_DEV (rhbz 1428530)
2017-03-02 19:03:47 +00:00
CONFIG_IPVTAP=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_IPW2100_DEBUG is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200_DEBUG is not set
# CONFIG_IPW2200 is not set
CONFIG_IPWIRELESS=m
Disable IPX and NCPFS These are being deprecated by the kernel community https://marc.info/?l=linux-netdev&m=151067745601327&w=2 Turn them off in advance.
2017-11-15 19:54:28 +00:00
# CONFIG_IPX is not set
Disable IrDA (broken, being dropped upstream)
2017-12-06 04:13:25 +00:00
# CONFIG_IRDA is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IR_ENE=m
CONFIG_IR_FINTEK=m
CONFIG_IR_GPIO_CIR=m
Linux v4.13-9219-g015a9e66b9b8
2017-09-08 22:21:55 +00:00
CONFIG_IR_GPIO_TX=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IR_HIX5HD2=m
CONFIG_IR_IGORPLUGUSB=m
CONFIG_IR_IGUANA=m
# CONFIG_IR_IMG is not set
Linux v4.16-5456-g17dec0a94915
2018-04-04 17:45:22 +00:00
CONFIG_IR_IMON_DECODER=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IR_IMON=m
Linux v4.16-5456-g17dec0a94915
2018-04-04 17:45:22 +00:00
CONFIG_IR_IMON_RAW=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IR_ITE_CIR=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_LIRC_CODEC=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_MCEUSB=m
Enable Amlogic (meson) SoCs for ARMv7/aarch64
2016-12-27 04:15:07 +00:00
CONFIG_IR_MESON=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_NUVOTON=m
Linux v4.13-9219-g015a9e66b9b8
2017-09-08 22:21:55 +00:00
CONFIG_IR_PWM_TX=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IRQ_CROSSBAR=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_REDRAT3=m
# CONFIG_IR_RX51 is not set
CONFIG_IR_SANYO_DECODER=m
Linux v4.9-11744-gb0b3a37
2016-12-19 21:11:15 +00:00
CONFIG_IR_SERIAL=m
CONFIG_IR_SERIAL_TRANSMITTER=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IR_SHARP_DECODER=m
minor IrDA cleanup, add fix for Pine64 boot already in 4.14
2017-12-06 04:33:38 +00:00
# CONFIG_IR_SIR is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IR_SONY_DECODER=m
Linux v4.10-2512-g7bb0338
2017-02-22 15:39:25 +00:00
CONFIG_IR_SPI=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IR_STREAMZAP=m
CONFIG_IR_SUNXI=m
CONFIG_IR_TTUSBIR=m
CONFIG_IR_WINBOND_CIR=m
CONFIG_IR_XMP_DECODER=m
# CONFIG_ISA is not set
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_ISCSI_TARGET_CXGB4=m
CONFIG_ISCSI_TARGET=m
CONFIG_ISCSI_TCP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIDRV=m
# CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_MAINT=m
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVERSION=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_ISDN_DRV_HISAX=m
CONFIG_ISDN_DRV_LOOP=m
CONFIG_ISDN_I4L=m
# CONFIG_ISDN is not set
CONFIG_ISDN_MPP=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_PPP=y
CONFIG_ISDN_TTY_FAX=y
# CONFIG_ISI is not set
CONFIG_ISL29003=m
CONFIG_ISL29020=m
# CONFIG_ISL29125 is not set
CONFIG_ISO9660_FS=m
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_ITCO_WDT=m
# CONFIG_ITG3200 is not set
CONFIG_IWL3945=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_IWL4965=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_IWLDVM=m
CONFIG_IWLEGACY_DEBUGFS=y
CONFIG_IWLEGACY_DEBUG=y
CONFIG_IWLEGACY=m
CONFIG_IWLMVM=m
# CONFIG_IWLWIFI_BCAST_FILTERING is not set
CONFIG_IWLWIFI_DEBUGFS=y
CONFIG_IWLWIFI_DEBUG=y
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
CONFIG_IWLWIFI=m
Linux v4.9-8648-g5cc60ae
2016-12-15 19:27:26 +00:00
# CONFIG_IWLWIFI_PCIE_RTPM is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_IWM is not set
CONFIG_IWMMXT=y
CONFIG_IXGBE_DCA=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE=m
CONFIG_IXGBEVF=m
CONFIG_IXGB=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_FS_XATTR=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
# CONFIG_JFFS2_LZO is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_JFFS2_RTIME=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
# CONFIG_JFFS2_RUBIN is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_STATISTICS is not set
CONFIG_JME=m
CONFIG_JOLIET=y
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_ANALOG=m
# CONFIG_JOYSTICK_AS5011 is not set
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_MAGELLAN=m
Linux v4.12-rc1
2017-05-15 15:20:02 +00:00
CONFIG_JOYSTICK_PSXPAD_SPI_FF=y
CONFIG_JOYSTICK_PSXPAD_SPI=m
Linux v4.16-9576-g38c23685b273
2018-04-06 17:00:21 +00:00
CONFIG_JOYSTICK_PXRC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_WALKERA0701=m
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_ZHENHUA=m
# CONFIG_JSA1212 is not set
CONFIG_JUMP_LABEL=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS=y
CONFIG_KARMA_PARTITION=y
# CONFIG_KASAN is not set
# CONFIG_KCOV is not set
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_KERNEL_MODE_NEON=y
Linux v4.9-11744-gb0b3a37
2016-12-19 21:11:15 +00:00
# CONFIG_KEXEC_FILE is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_KEXEC=y
Updates for ARM devices, Build ARM Chromebook specifics on all ARM architectures
2017-05-29 10:10:21 +00:00
CONFIG_KEYBOARD_ADC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_BCM is not set
# CONFIG_KEYBOARD_CAP11XX is not set
CONFIG_KEYBOARD_CROS_EC=m
Linux v4.12-10317-gaf3c8d9
2017-07-10 15:40:53 +00:00
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_KEYBOARD_GPIO=m
CONFIG_KEYBOARD_GPIO_POLLED=m
CONFIG_KEYBOARD_IMX=m
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
CONFIG_KEYBOARD_MATRIX=m
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_NVEC=y
CONFIG_KEYBOARD_OMAP4=m
# CONFIG_KEYBOARD_OPENCORES is not set
CONFIG_KEYBOARD_PMIC8XXX=m
CONFIG_KEYBOARD_PXA27x=y
Various ARM updates
2017-05-24 11:27:01 +00:00
CONFIG_KEYBOARD_QT1070=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_KEYBOARD_QT2160 is not set
CONFIG_KEYBOARD_SAMSUNG=m
# CONFIG_KEYBOARD_SH_KEYSC is not set
CONFIG_KEYBOARD_SNVS_PWRKEY=m
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_KEYBOARD_ST_KEYSCAN=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_KEYBOARD_STMPE=m
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_SUN4I_LRADC=m
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
CONFIG_KEYBOARD_TEGRA=m
Linux v4.10-9579-gf1ef09f Includes config options from yesterday that were missed
2017-02-24 16:50:29 +00:00
CONFIG_KEYBOARD_TM2_TOUCHKEY=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_KEYBOARD_TWL4030=m
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_KEY_DH_OPERATIONS=y
Linux v4.12-7934-g9f45efb
2017-07-07 14:59:21 +00:00
# CONFIG_KEYSTONE_REMOTEPROC is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_KEYS=y
# CONFIG_KGDB_KDB is not set
CONFIG_KGDB_LOW_LEVEL_TRAP=y
CONFIG_KGDB_SERIAL_CONSOLE=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_KGDB_TESTS=y
CONFIG_KGDB=y
# CONFIG_KMX61 is not set
Linux v4.11-rc1-88-gec3b93a
2017-03-08 15:51:06 +00:00
CONFIG_KPROBE_EVENTS=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_KPROBES_SANITY_TEST is not set
CONFIG_KPROBES=y
CONFIG_KS0108_DELAY=2
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
# CONFIG_KS7010 is not set
# CONFIG_KS8842 is not set
CONFIG_KS8851=m
CONFIG_KS8851_MLL=m
CONFIG_KSM=y
CONFIG_KSZ884X_PCI=m
CONFIG_KUSER_HELPERS=y
CONFIG_KXCJK1013=m
Various ARM updates
2017-05-24 11:27:01 +00:00
CONFIG_KXSD9_I2C=m
CONFIG_KXSD9=m
CONFIG_KXSD9_SPI=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_ETH=m
CONFIG_L2TP_IP=m
CONFIG_L2TP=m
CONFIG_L2TP_V3=y
# CONFIG_LAPB is not set
CONFIG_LATENCYTOP=y
CONFIG_LATTICE_ECP3_CONFIG=m
CONFIG_LBDAF=y
CONFIG_LCD_AMS369FG06=m
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_HX8357=m
CONFIG_LCD_ILI922X=m
CONFIG_LCD_ILI9320=m
CONFIG_LCD_L4F00242T03=m
CONFIG_LCD_LD9040=m
CONFIG_LCD_LMS283GF05=m
CONFIG_LCD_LMS501KF03=m
CONFIG_LCD_LTV350QV=m
CONFIG_LCD_PLATFORM=m
CONFIG_LCD_S6E63M0=m
CONFIG_LCD_TDO24M=m
CONFIG_LCD_VGG2432A4=m
# CONFIG_LDM_DEBUG is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LEDS_AAT1290 is not set
Linux v4.13-9219-g015a9e66b9b8
2017-09-08 22:21:55 +00:00
CONFIG_LEDS_AS3645A=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_BLINKM=m
Linux v4.10-1242-g9763dd6
2017-02-21 19:21:44 +00:00
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_LEDS_CLASS_FLASH=m
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLEVO_MAIL=m
CONFIG_LEDS_DA9052=m
CONFIG_LEDS_DAC124S085=m
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_GPIO_REGISTER=y
# CONFIG_LEDS_IS31FL319X is not set
Enable IS31FL32xx LED driver
2017-11-04 16:22:49 +00:00
CONFIG_LEDS_IS31FL32XX=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_LEDS_KTD2692 is not set
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_LM3642 is not set
Linux v4.15-6064-g255442c93843
2018-02-01 21:50:49 +00:00
CONFIG_LEDS_LM3692X=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_LEDS_LOCOMO is not set
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP3952=m
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP55XX_COMMON is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_MAX8997=m
CONFIG_LEDS_MC13783=m
CONFIG_LEDS_MLXCPLD=m
Linux v4.16-5456-g17dec0a94915
2018-04-04 17:45:22 +00:00
CONFIG_LEDS_MLXREG=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_LEDS_NET48XX is not set
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_LEDS_NIC78BX=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_LEDS_NS2=m
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
Linux v4.10-rc1 (didn't adjust debug options), ARM config updates, minor general config cleanups
2016-12-27 02:51:37 +00:00
CONFIG_LEDS_PM8058=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_LEDS_PWM=m
CONFIG_LEDS_REGULATOR=m
# CONFIG_LEDS_S3C24XX is not set
CONFIG_LEDS_SYSCON=y
CONFIG_LEDS_TCA6507=m
# CONFIG_LEDS_TLC591XX is not set
Linux v4.14-4050-g37cb8e1f8e10
2017-11-15 17:40:48 +00:00
CONFIG_LEDS_TRIGGER_ACTIVITY=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_MTD=y
Linux v4.15-6064-g255442c93843
2018-02-01 21:50:49 +00:00
CONFIG_LEDS_TRIGGER_NETDEV=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_TRANSIENT=m
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_LEDS_USER=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_LEDS_WM831X_STATUS=m
CONFIG_LEDS_WM8350=m
Linux v4.9-2682-ge7aa8c2 (missing secure boot as that is being rebased to the new upstream tree
2016-12-13 22:26:04 +00:00
CONFIG_LED_TRIGGER_PHY=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_LEGACY_PTYS is not set
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
CONFIG_LIB80211_CRYPT_WEP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_LIB80211=m
CONFIG_LIBCRC32C=m
CONFIG_LIBERTAS_CS=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_MESH=y
CONFIG_LIBERTAS_SDIO=m
CONFIG_LIBERTAS_SPI=m
# CONFIG_LIBERTAS_THINFIRM is not set
CONFIG_LIBERTAS_USB=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
# CONFIG_LIBIPW_DEBUG is not set
# CONFIG_LIBNVDIMM is not set
# CONFIG_LIDAR_LITE_V2 is not set
Linux v4.9-2682-ge7aa8c2 (missing secure boot as that is being rebased to the new upstream tree
2016-12-13 22:26:04 +00:00
CONFIG_LIQUIDIO_VF=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_LIRC_BT829=m
CONFIG_LIRC_IMON=m
CONFIG_LIRC_PARALLEL=m
CONFIG_LIRC_SERIAL=m
CONFIG_LIRC_SERIAL_TRANSMITTER=y
CONFIG_LIRC_STAGING=y
Linux v4.15-11704-ga2e5790d8416
2018-02-07 15:13:24 +00:00
CONFIG_LIRC=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_LIRC_ZILOG=m
# CONFIG_LIVEPATCH is not set
# CONFIG_LKDTM is not set
# CONFIG_LLC2 is not set
CONFIG_LLC=m
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_LMP91000=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_LNET is not set
Linux v4.11-8539-gaf82455
2017-05-05 18:07:47 +00:00
# CONFIG_LOAD_UEFI_KEYS is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_LOCKD=m
Linux v4.14-rc5-31-g73d3393ada4f
2017-10-19 20:49:02 +00:00
# CONFIG_LOCK_DOWN_IN_EFI_SECURE_BOOT is not set
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
# CONFIG_LOCK_DOWN_KERNEL is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_LOCKD_V4=y
# CONFIG_LOCK_STAT is not set
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_LOCKUP_DETECTOR=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
# CONFIG_LOGFS is not set
CONFIG_LOGIG940_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGITECH_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO=y
CONFIG_LOOPBACK_TARGET=m
minor cleanup of some of the MFD and associated options (NFC)
2016-06-30 12:53:25 +00:00
# CONFIG_LPC_ICH is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_LP_CONSOLE=y
minor cleanup of some of the MFD and associated options (NFC)
2016-06-30 12:53:25 +00:00
# CONFIG_LPC_SCH is not set
Linux v4.11-rc2-208-g69eea5a
2017-03-16 15:53:14 +00:00
CONFIG_LPFC_NVME_INITIATOR=y
CONFIG_LPFC_NVME_TARGET=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_LSI_ET1011C_PHY=m
CONFIG_LSM_MMAP_MIN_ADDR=32768
Linux v4.13-4257-ge7d0c41ecc2e
2017-09-06 18:29:50 +00:00
# CONFIG_LTC2471 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_LTC2485 is not set
Linux v4.11-10603-g13e0988
2017-05-08 17:38:14 +00:00
# CONFIG_LTC2497 is not set
# CONFIG_LTC2632 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_LTE_GDM724X is not set
# CONFIG_LTR501 is not set
# CONFIG_LUSTRE_FS is not set
Linux v4.16-7248-g06dd3dfeea60
2018-04-05 17:30:09 +00:00
CONFIG_LV0104CS=m
Linux v4.9-2682-ge7aa8c2 (missing secure boot as that is being rebased to the new upstream tree
2016-12-13 22:26:04 +00:00
CONFIG_LWTUNNEL_BPF=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_LWTUNNEL=y
CONFIG_LXT_PHY=m
# CONFIG_M62332 is not set
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_HWSIM=m
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211=m
CONFIG_MAC80211_MESH=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC802154=m
CONFIG_MACB=m
Linux v4.9-11744-gb0b3a37
2016-12-19 21:11:15 +00:00
CONFIG_MACB_PCI=m
Linux v4.12-6090-g9b51f04
2017-07-06 16:11:57 +00:00
CONFIG_MACB_USE_HWSTAMP=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_MACH_ARMADA_370=y
CONFIG_MACH_ARMADA_375=y
CONFIG_MACH_ARMADA_38X=y
CONFIG_MACH_ARMADA_39X=y
CONFIG_MACH_ARMADA_XP=y
# CONFIG_MACH_BROWNSTONE is not set
CONFIG_MACH_DOVE=y
# CONFIG_MACH_FLINT is not set
# CONFIG_MACH_MARVELL_JASPER is not set
Update Amlogic meson support
2017-04-03 19:29:35 +00:00
# CONFIG_MACH_MESON6 is not set
CONFIG_MACH_MESON8B=y
# CONFIG_MACH_MESON8 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MACH_MMP2_DT=y
# CONFIG_MACH_OMAP3517EVM is not set
# CONFIG_MACH_OMAP3_PANDORA is not set
# CONFIG_MACH_OMAP_LDP is not set
CONFIG_MACH_SUN4I=y
CONFIG_MACH_SUN5I=y
CONFIG_MACH_SUN6I=y
CONFIG_MACH_SUN7I=y
CONFIG_MACH_SUN8I=y
CONFIG_MACH_SUN9I=y
CONFIG_MACHZ_WDT=m
CONFIG_MAC_PARTITION=y
CONFIG_MACSEC=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
# CONFIG_MAG3110 is not set
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x0
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
CONFIG_MAGIC_SYSRQ_SERIAL=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MAGIC_SYSRQ=y
# CONFIG_MAILBOX_TEST is not set
CONFIG_MAILBOX=y
Linux v4.14-4050-g37cb8e1f8e10
2017-11-15 17:40:48 +00:00
# CONFIG_MANAGER_SBS is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_MANDATORY_FILE_LOCKING is not set
CONFIG_MANTIS_CORE=m
Linux v4.12-6090-g9b51f04
2017-07-06 16:11:57 +00:00
CONFIG_MARVELL_10G_PHY=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MARVELL_PHY=m
# CONFIG_MAX1027 is not set
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
# CONFIG_MAX11100 is not set
Linux v4.11-10603-g13e0988
2017-05-08 17:38:14 +00:00
# CONFIG_MAX1118 is not set
Updates for ARM devices, Build ARM Chromebook specifics on all ARM architectures
2017-05-29 10:10:21 +00:00
CONFIG_MAX1363=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MAX30100=m
Linux v4.11-10603-g13e0988
2017-05-08 17:38:14 +00:00
# CONFIG_MAX30102 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_MAX44000 is not set
# CONFIG_MAX517 is not set
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
# CONFIG_MAX5481 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_MAX5487 is not set
# CONFIG_MAX5821 is not set
# CONFIG_MAX63XX_WATCHDOG is not set
Linux v4.11-10603-g13e0988
2017-05-08 17:38:14 +00:00
# CONFIG_MAX9611 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_MAXIM_THERMOCOUPLE is not set
CONFIG_MAX_RAW_DEVS=8192
# CONFIG_MC3230 is not set
# CONFIG_MCB is not set
# CONFIG_MCE_AMD_INJ is not set
# CONFIG_MCP320X is not set
# CONFIG_MCP3422 is not set
Linux v4.16-7248-g06dd3dfeea60
2018-04-05 17:30:09 +00:00
CONFIG_MCP4018=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_MCP4131 is not set
# CONFIG_MCP4531 is not set
# CONFIG_MCP4725 is not set
# CONFIG_MCP4922 is not set
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_MCPM=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_CLUSTER is not set
CONFIG_MD_FAULTY=m
CONFIG_MDIO_BCM_UNIMAC=m
CONFIG_MDIO_BITBANG=m
CONFIG_MDIO_BUS_MUX_GPIO=m
CONFIG_MDIO_BUS_MUX=m
CONFIG_MDIO_BUS_MUX_MMIOREG=m
Linux v4.10-rc1 (didn't adjust debug options), ARM config updates, minor general config cleanups
2016-12-27 02:51:37 +00:00
CONFIG_MDIO_GPIO=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_MDIO_HISI_FEMAC is not set
Enable Physlink/SFP functionality, minor cleanups, Tegra DRM FTB fix
2017-09-12 17:26:40 +00:00
CONFIG_MDIO_I2C=m
Linux v4.10-rc1 (didn't adjust debug options), ARM config updates, minor general config cleanups
2016-12-27 02:51:37 +00:00
# CONFIG_MDIO_OCTEON is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MDIO_SUN4I=m
# CONFIG_MDIO_THUNDER is not set
CONFIG_MD_LINEAR=m
# CONFIG_MDM_GCC_9615 is not set
# CONFIG_MDM_LCC_9615 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID456=m
CONFIG_MD=y
CONFIG_MEDIA_ALTERA_CI=m
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
Linux v4.9-11744-gb0b3a37
2016-12-19 21:11:15 +00:00
CONFIG_MEDIA_CEC_DEBUG=y
Linux v4.11-10603-g13e0988
2017-05-08 17:38:14 +00:00
CONFIG_MEDIA_CEC_RC=y
Linux v4.9-11744-gb0b3a37
2016-12-19 21:11:15 +00:00
CONFIG_MEDIA_CEC_SUPPORT=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_MEDIA_CONTROLLER_DVB is not set
CONFIG_MEDIA_CONTROLLER=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_PCI_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_RC_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_SUPPORT=m
# CONFIG_MEDIA_TUNER_MSI001 is not set
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_SAS=m
Linux v4.15-11704-ga2e5790d8416
2018-02-07 15:13:24 +00:00
CONFIG_MELLANOX_PLATFORM=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MEMCG_SWAP_ENABLED=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG=y
CONFIG_MEMORY_FAILURE=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_MEMORY=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_MEMSTICK_DEBUG is not set
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK=m
CONFIG_MEMSTICK_R592=m
CONFIG_MEMSTICK_REALTEK_PCI=m
CONFIG_MEMSTICK_REALTEK_USB=m
CONFIG_MEMSTICK_TIFM_MS=m
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
# CONFIG_MEMTEST is not set
# CONFIG_MEN_A21_WDT is not set
Enable Amlogic (meson) SoCs for ARMv7/aarch64
2016-12-27 04:15:07 +00:00
CONFIG_MESON_EFUSE=m
# CONFIG_MESON_GXBB_WATCHDOG is not set
# CONFIG_MESON_GXL_PHY is not set
Linux v4.14-12375-g2dcd9c71c1ff
2017-11-18 01:09:35 +00:00
# CONFIG_MESON_GX_PM_DOMAINS is not set
Linux v4.13-11197-gf007cad159e9
2017-09-11 18:05:08 +00:00
CONFIG_MESON_GX_SOCINFO=y
Linux v4.14-2229-g894025f24bd0
2017-11-14 18:23:09 +00:00
CONFIG_MESON_IRQ_GPIO=y
Linux v4.14-12375-g2dcd9c71c1ff
2017-11-18 01:09:35 +00:00
# CONFIG_MESON_MX_EFUSE is not set
# CONFIG_MESON_MX_SOCINFO is not set
Update Amlogic meson support
2017-04-03 19:29:35 +00:00
CONFIG_MESON_SARADC=m
CONFIG_MESON_SM=y
Enable Amlogic (meson) SoCs for ARMv7/aarch64
2016-12-27 04:15:07 +00:00
CONFIG_MESON_WATCHDOG=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_MFD_88PM800=m
CONFIG_MFD_88PM805=m
minor cleanup of some of the MFD and associated options (NFC)
2016-06-30 12:53:25 +00:00
# CONFIG_MFD_88PM860X is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_MFD_AAT2870_CORE is not set
Minor ARM config updates
2016-12-20 10:11:24 +00:00
CONFIG_MFD_AC100=m
minor cleanup of some of the MFD and associated options (NFC)
2016-06-30 12:53:25 +00:00
# CONFIG_MFD_ACT8945A is not set
Update config options
2012-07-30 23:13:04 +00:00
# CONFIG_MFD_ARIZONA_I2C is not set
minor cleanup of some of the MFD and associated options (NFC)
2016-06-30 12:53:25 +00:00
# CONFIG_MFD_ARIZONA is not set
# CONFIG_MFD_ARIZONA_SPI is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_MFD_AS3711 is not set
CONFIG_MFD_AS3722=y
minor cleanup of some of the MFD and associated options (NFC)
2016-06-30 12:53:25 +00:00
# CONFIG_MFD_ASIC3 is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_AXP20X_RSB=m
CONFIG_MFD_AXP20X=y
minor cleanup of some of the MFD and associated options (NFC)
2016-06-30 12:53:25 +00:00
# CONFIG_MFD_BCM590XX is not set
Linux v4.13-9219-g015a9e66b9b8
2017-09-08 22:21:55 +00:00
CONFIG_MFD_BD9571MWV=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_MFD_CORE=y
Various ARM updates
2017-05-24 11:27:01 +00:00
# CONFIG_MFD_CPCAP is not set
Linux v4.15-1549-g6304672b7f0a
2018-01-30 18:26:27 +00:00
CONFIG_MFD_CROS_EC_CHARDEV=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MFD_CROS_EC_I2C=m
CONFIG_MFD_CROS_EC=m
CONFIG_MFD_CROS_EC_SPI=m
minor cleanup of some of the MFD and associated options (NFC)
2016-06-30 12:53:25 +00:00
# CONFIG_MFD_CS5535 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9055=y
minor cleanup of some of the MFD and associated options (NFC)
2016-06-30 12:53:25 +00:00
# CONFIG_MFD_DA9062 is not set
Linux v3.11-7890-ge5c832d
2013-09-09 12:29:49 +00:00
# CONFIG_MFD_DA9063 is not set
minor cleanup of some of the MFD and associated options (NFC)
2016-06-30 12:53:25 +00:00
# CONFIG_MFD_DA9150 is not set
Linux v3.19-rc2 - Temporarily disable aarch64patches - Happy New Year
2015-01-05 21:09:49 +00:00
# CONFIG_MFD_DLN2 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MFD_EXYNOS_LPASS=m
minor cleanup of some of the MFD and associated options (NFC)
2016-06-30 12:53:25 +00:00
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_LM3533 is not set
Linux v3.13-3260-g03d11a0
2014-01-22 14:17:27 +00:00
# CONFIG_MFD_LP3943 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_MFD_LP8788 is not set
minor cleanup of some of the MFD and associated options (NFC)
2016-06-30 12:53:25 +00:00
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MFD_MAX77686=y
minor cleanup of some of the MFD and associated options (NFC)
2016-06-30 12:53:25 +00:00
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MFD_MAX8907=m
minor cleanup of some of the MFD and associated options (NFC)
2016-06-30 12:53:25 +00:00
# CONFIG_MFD_MAX8925 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MFD_MAX8997=y
minor cleanup of some of the MFD and associated options (NFC)
2016-06-30 12:53:25 +00:00
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MFD_MC13XXX_SPI=m
Linux v3.17-7639-g90eac7eee2f4
2014-10-13 11:56:44 +00:00
# CONFIG_MFD_MENF21BMC is not set
minor cleanup of some of the MFD and associated options (NFC)
2016-06-30 12:53:25 +00:00
# CONFIG_MFD_MT6397 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MFD_NVEC=y
CONFIG_MFD_OMAP_USB_HOST=y
CONFIG_MFD_PALMAS=y
# CONFIG_MFD_PCF50633 is not set
CONFIG_MFD_PM8XXX=m
CONFIG_MFD_QCOM_RPM=m
# CONFIG_MFD_RC5T583 is not set
minor cleanup of some of the MFD and associated options (NFC)
2016-06-30 12:53:25 +00:00
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RETU is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MFD_RK808=m
Linux v3.17-9670-g0429fbc0bdc2
2014-10-15 12:18:47 +00:00
# CONFIG_MFD_RN5T618 is not set
Linux v3.19-8784-gb2b89ebfc0f0
2015-02-18 21:50:20 +00:00
# CONFIG_MFD_RT5033 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MFD_SEC_CORE=y
minor cleanup of some of the MFD and associated options (NFC)
2016-06-30 12:53:25 +00:00
# CONFIG_MFD_SI476X_CORE is not set
Linux v4.0-3843-gbb0fd7ab0986
2015-04-15 14:47:18 +00:00
# CONFIG_MFD_SKY81452 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MFD_SM501_GPIO=y
CONFIG_MFD_SM501=m
# CONFIG_MFD_SMSC is not set
CONFIG_MFD_SPMI_PMIC=m
CONFIG_MFD_STMPE=y
Linux v4.9-11815-ge93b1cc
2016-12-20 15:51:29 +00:00
CONFIG_MFD_SUN4I_GPADC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MFD_SYSCON=y
CONFIG_MFD_T7L66XB=y
minor cleanup of some of the MFD and associated options (NFC)
2016-06-30 12:53:25 +00:00
# CONFIG_MFD_TC3589X is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MFD_TC6387XB=y
minor cleanup of some of the MFD and associated options (NFC)
2016-06-30 12:53:25 +00:00
# CONFIG_MFD_TC6393XB is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MFD_TI_AM335X_TSCADC=m
Add RPi3 GPIO expander, RPi fixes, OMAP serial update, general ARM fixes
2018-03-03 22:51:13 +00:00
CONFIG_MFD_TI_LMU=m
Linux v4.8-8780-gd230ec7
2016-10-06 18:19:55 +00:00
# CONFIG_MFD_TI_LP873X is not set
Linux v4.12-10317-gaf3c8d9
2017-07-10 15:40:53 +00:00
# CONFIG_MFD_TI_LP87565 is not set
minor cleanup of some of the MFD and associated options (NFC)
2016-06-30 12:53:25 +00:00
# CONFIG_MFD_TIMBERDALE is not set
Linux v4.5-6229-gf7813ad5cbfd - ipmi, mfd, sound merges
2016-03-18 20:52:17 +00:00
# CONFIG_MFD_TPS65086 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TPS65218=m
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS65912_SPI=y
CONFIG_MFD_TPS65912=y
Linux v4.13-9219-g015a9e66b9b8
2017-09-08 22:21:55 +00:00
CONFIG_MFD_TPS68470=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MFD_TPS80031=y
CONFIG_MFD_VEXPRESS_SYSREG=y
CONFIG_MFD_VIPERBOARD=m
CONFIG_MFD_VX855=m
CONFIG_MFD_WL1273_CORE=m
minor cleanup of some of the MFD and associated options (NFC)
2016-06-30 12:53:25 +00:00
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8350 is not set
# CONFIG_MFD_WM8400 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MFD_WM8994=m
# CONFIG_MG_DISK is not set
CONFIG_MICREL_KS8995MA=m
CONFIG_MICREL_PHY=m
Linux v4.12-6090-g9b51f04
2017-07-06 16:11:57 +00:00
CONFIG_MICROCHIP_KSZ=m
CONFIG_MICROCHIP_KSZ_SPI_DRIVER=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MICROCHIP_PHY=m
CONFIG_MICROSEMI_PHY=m
CONFIG_MIGRATION=y
CONFIG_MII=m
initial srpm import
2010-07-29 23:46:31 +00:00
CONFIG_MINIX_FS=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MINIX_SUBPARTITION=y
CONFIG_MISC_FILESYSTEMS=y
Linux v4.15-1549-g6304672b7f0a
2018-01-30 18:26:27 +00:00
CONFIG_MISC_RTSX_PCI=m
CONFIG_MISC_RTSX_USB=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_L1OIP=m
CONFIG_MISDN=m
CONFIG_MISDN_NETJET=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_W6692=m
CONFIG_MKISS=m
Linux v4.14-9248-ge60e1ee60630
2017-11-16 17:50:37 +00:00
CONFIG_MLX4_CORE_GEN2=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MLX4_CORE=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_EN=m
Disable Infiniband/RDMA on ARMv7 as we no longer have userspace tools
2017-08-31 17:35:16 +00:00
# CONFIG_MLX4_INFINIBAND is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MLX5_CORE_EN_DCB=y
CONFIG_MLX5_CORE_EN=y
Linux v4.11-4395-g89c9fea
2017-05-03 17:50:25 +00:00
CONFIG_MLX5_CORE_IPOIB=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MLX5_CORE=m
Try turning off the MLX configs which seem to generate bad divisions?
2017-07-06 20:34:33 +00:00
# CONFIG_MLX5_EN_IPSEC is not set
Linux v4.13-6657-g3b9f8ed25dbe
2017-09-07 21:18:25 +00:00
CONFIG_MLX5_ESWITCH=y
Try turning off the MLX configs which seem to generate bad divisions?
2017-07-06 20:34:33 +00:00
# CONFIG_MLX5_FPGA is not set
Disable Infiniband/RDMA on ARMv7 as we no longer have userspace tools
2017-08-31 17:35:16 +00:00
# CONFIG_MLX5_INFINIBAND is not set
Linux v4.13-6657-g3b9f8ed25dbe
2017-09-07 21:18:25 +00:00
CONFIG_MLX5_MPFS=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_MLX90614 is not set
Linux v4.16-7248-g06dd3dfeea60
2018-04-05 17:30:09 +00:00
CONFIG_MLX90632=m
Linux v4.9-10415-g73e2e0c
2016-12-16 15:42:31 +00:00
CONFIG_MLX_CPLD_PLATFORM=m
Linux v4.12-6090-g9b51f04
2017-07-06 16:11:57 +00:00
CONFIG_MLXFW=m
Linux v4.15-11704-ga2e5790d8416
2018-02-07 15:13:24 +00:00
CONFIG_MLXREG_HOTPLUG=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MLXSW_CORE_HWMON=y
CONFIG_MLXSW_CORE=m
Linux v4.9-2682-ge7aa8c2 (missing secure boot as that is being rebased to the new upstream tree
2016-12-13 22:26:04 +00:00
CONFIG_MLXSW_CORE_THERMAL=y
CONFIG_MLXSW_I2C=m
CONFIG_MLXSW_MINIMAL=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MLXSW_PCI=m
CONFIG_MLXSW_SPECTRUM_DCB=y
CONFIG_MLXSW_SPECTRUM=m
Linux v4.9-2682-ge7aa8c2 (missing secure boot as that is being rebased to the new upstream tree
2016-12-13 22:26:04 +00:00
CONFIG_MLXSW_SWITCHIB=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MLXSW_SWITCHX2=m
# CONFIG_MMA7455_I2C is not set
# CONFIG_MMA7455_SPI is not set
CONFIG_MMA7660=m
Updates for ARM devices, Build ARM Chromebook specifics on all ARM architectures
2017-05-29 10:10:21 +00:00
CONFIG_MMA8452=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_MMA9551 is not set
# CONFIG_MMA9553 is not set
# CONFIG_MMC35240 is not set
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_MMC_ARMMMCI=m
Minor ARM config cleanups, new bcm283x mmc driver (enabling us to get wifi on RPi3)
2017-03-13 10:31:46 +00:00
CONFIG_MMC_BCM2835=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_CB710=m
Linux v4.15-1549-g6304672b7f0a
2018-01-30 18:26:27 +00:00
CONFIG_MMC_CQHCI=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_MMC_DEBUG is not set
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_MMC_DW_EXYNOS=m
Linux v4.16-5456-g17dec0a94915
2018-04-04 17:45:22 +00:00
CONFIG_MMC_DW_HI3798CV200=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_MMC_DW_K3=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MMC_DW=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_MMC_DW_PCI=m
CONFIG_MMC_DW_PLTFM=m
CONFIG_MMC_DW_ROCKCHIP=m
Enable Amlogic (meson) SoCs for ARMv7/aarch64
2016-12-27 04:15:07 +00:00
# CONFIG_MMC_MESON_GX is not set
Linux v4.14-2229-g894025f24bd0
2017-11-14 18:23:09 +00:00
CONFIG_MMC_MESON_MX_SDIO=m
Enable Amlogic (meson) SoCs for ARMv7/aarch64
2016-12-27 04:15:07 +00:00
# CONFIG_MMC_MTK is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MMC_MVSDIO=m
CONFIG_MMC_MXC=m
CONFIG_MMC_OMAP_HS=m
CONFIG_MMC_OMAP=m
Linux v4.13-9219-g015a9e66b9b8
2017-09-08 22:21:55 +00:00
CONFIG_MMC_QCOM_DML=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MMC_REALTEK_PCI=m
CONFIG_MMC_REALTEK_USB=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_MMC_SDHCI_CADENCE=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MMC_SDHCI_DOVE=m
CONFIG_MMC_SDHCI_ESDHC_IMX=m
# CONFIG_MMC_SDHCI_F_SDH30 is not set
CONFIG_MMC_SDHCI_IPROC=m
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_MSM=m
CONFIG_MMC_SDHCI_OF_ARASAN=m
# CONFIG_MMC_SDHCI_OF_AT91 is not set
Raspberry Pi serial console fixes, minor other Pi improvements, Various ARM cleanups, build mmc/pwrseq non modular
2017-09-11 18:17:30 +00:00
CONFIG_MMC_SDHCI_OF_ESDHC=m
Linux v4.14-2229-g894025f24bd0
2017-11-14 18:23:09 +00:00
CONFIG_MMC_SDHCI_OMAP=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_SDHCI_PXAV2=m
CONFIG_MMC_SDHCI_PXAV3=m
CONFIG_MMC_SDHCI_S3C_DMA=y
CONFIG_MMC_SDHCI_S3C=m
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_MMC_SDHCI_ST=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MMC_SDHCI_TEGRA=m
Linux v4.11-4395-g89c9fea
2017-05-03 17:50:25 +00:00
CONFIG_MMC_SDHCI_XENON=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MMC_SDRICOH_CS=m
CONFIG_MMC_SPI=m
CONFIG_MMC_SUNXI=m
# CONFIG_MMC_TEST is not set
CONFIG_MMC_TIFM_SD=m
# CONFIG_MMC_TMIO is not set
disable a number of unused PATA/SATA drivers on ARM, don't build x86 specific drivers on other arches, minor tweaks to other arch specific configs
2017-10-01 18:33:34 +00:00
# CONFIG_MMC_TOSHIBA_PCI is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_USHC=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_WBSD=m
Raspberry Pi serial console fixes, minor other Pi improvements, Various ARM cleanups, build mmc/pwrseq non modular
2017-09-11 18:17:30 +00:00
CONFIG_MMC=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MMP_PDMA=y
CONFIG_MMP_TDMA=y
CONFIG_MMU=y
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
# CONFIG_MODULE_SIG_SHA1 is not set
CONFIG_MODULE_SIG_SHA256=y
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MOST is not set
CONFIG_MOUSE_APPLETOUCH=m
# CONFIG_MOUSE_ATIXL is not set
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C_I2C=y
CONFIG_MOUSE_ELAN_I2C=m
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_MOUSE_VSXXXAA=m
Linux v4.9-2682-ge7aa8c2 (missing secure boot as that is being rebased to the new upstream tree
2016-12-13 22:26:04 +00:00
CONFIG_MOVABLE_NODE=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_MPL115_I2C is not set
CONFIG_MPL115=m
# CONFIG_MPL115_SPI is not set
CONFIG_MPL3115=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_MPLS_ROUTING=m
Various ARM updates
2017-05-24 11:27:01 +00:00
CONFIG_MPU3050_I2C=m
Linux v4.10-2512-g7bb0338
2017-02-22 15:39:25 +00:00
CONFIG_MQ_IOSCHED_DEADLINE=y
Linux v4.11-1464-gd3b5d35
2017-05-02 19:04:44 +00:00
CONFIG_MQ_IOSCHED_KYBER=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_MS5611 is not set
# CONFIG_MS5637 is not set
# CONFIG_MS_BLOCK is not set
CONFIG_MSDOS_FS=m
CONFIG_MSDOS_PARTITION=y
Config improvements for Qualcomm devices
2017-06-26 22:32:58 +00:00
CONFIG_MSM_GCC_8660=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_MSM_GCC_8916 is not set
Config improvements for Qualcomm devices
2017-06-26 22:32:58 +00:00
CONFIG_MSM_GCC_8960=y
CONFIG_MSM_GCC_8974=y
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
# CONFIG_MSM_GCC_8994 is not set
Config improvements for Qualcomm devices
2017-06-26 22:32:58 +00:00
CONFIG_MSM_GCC_8996=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_MSM_IOMMU is not set
# CONFIG_MSM_LCC_8960 is not set
CONFIG_MSM_MMCC_8960=m
CONFIG_MSM_MMCC_8974=m
CONFIG_MSM_MMCC_8996=m
CONFIG_MSPRO_BLOCK=m
CONFIG_MT7601U=m
Linux v4.15-6064-g255442c93843
2018-02-01 21:50:49 +00:00
CONFIG_MT76x2E=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
CONFIG_MTD_BLKDEVS=m
Enable JFFS2 and some MTD modules (rhbz 1474493)
2018-04-09 17:09:44 +00:00
CONFIG_MTD_BLOCK2MTD=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI=m
CONFIG_MTD_CFI_STAA=m
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
# CONFIG_MTD_DOCG3 is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_JEDECPROBE is not set
# CONFIG_MTD_LPDDR2_NVM is not set
# CONFIG_MTD_LPDDR is not set
CONFIG_MTD=m
CONFIG_MTD_M25P80=m
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
Linux v4.12-11618-gb86faee6d111
2017-07-14 15:44:07 +00:00
# CONFIG_MTD_MCHP23K256 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_MTD_MT81xx_NOR is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_NAND_BRCMNAND is not set
CONFIG_MTD_NAND_CAFE=m
# CONFIG_MTD_NAND_DENALI_DT is not set
# CONFIG_MTD_NAND_DENALI is not set
# CONFIG_MTD_NAND_DENALI_PCI is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_DOCG4=m
# CONFIG_MTD_NAND_ECC_BCH is not set
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND_FSMC=m
CONFIG_MTD_NAND_GPIO=m
CONFIG_MTD_NAND_GPMI_NAND=m
# CONFIG_MTD_NAND_HISI504 is not set
CONFIG_MTD_NAND=m
Linux v4.15-1549-g6304672b7f0a
2018-01-30 18:26:27 +00:00
CONFIG_MTD_NAND_MARVELL=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_MTD_NAND_MTK is not set
CONFIG_MTD_NAND_MXC=m
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_OMAP2=m
CONFIG_MTD_NAND_OMAP_BCH=y
CONFIG_MTD_NAND_ORION=m
Linux v4.9-11744-gb0b3a37
2016-12-19 21:11:15 +00:00
# CONFIG_MTD_NAND_OXNAS is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_NAND_PXA3xx=m
CONFIG_MTD_NAND_QCOM=m
CONFIG_MTD_NAND_RICOH=m
CONFIG_MTD_NAND_SUNXI=m
CONFIG_MTD_NAND_TMIO=m
CONFIG_MTD_OF_PARTS=m
# CONFIG_MTD_ONENAND is not set
CONFIG_MTD_ONENAND_OMAP2=m
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_PHYSMAP=m
Linux v4.10-1242-g9763dd6
2017-02-21 19:21:44 +00:00
# CONFIG_MTD_PHYSMAP_OF_GEMINI is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MTD_PHYSMAP_OF=m
CONFIG_MTD_PHYSMAP_OF_VERSATILE=y
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_ROM is not set
Linux v4.15-rc1
2017-11-27 17:15:57 +00:00
# CONFIG_MTD_SHARPSL_PARTS is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_MTD_SLRAM is not set
CONFIG_MTD_SPINAND_MT29F=m
CONFIG_MTD_SPINAND_ONDIEECC=y
CONFIG_MTD_SPI_NOR=m
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
CONFIG_MTD_SST25L=m
CONFIG_MTD_ST_SPI_FSM=m
# CONFIG_MTD_SWAP is not set
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_TS5500 is not set
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_BLOCK is not set
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
Linux v4.16-7248-g06dd3dfeea60
2018-04-05 17:30:09 +00:00
# CONFIG_MTK_MMC is not set
Linux v4.12-3441-g1996454
2017-07-05 16:00:04 +00:00
CONFIG_MULTIPLEXER=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_MUSB_PIO_ONLY is not set
Linux v4.12-3441-g1996454
2017-07-05 16:00:04 +00:00
CONFIG_MUX_ADG792A=m
CONFIG_MUX_GPIO=m
CONFIG_MUX_MMIO=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_MV643XX_ETH=m
CONFIG_MVEBU_CLK_COREDIV=y
CONFIG_MVEBU_CLK_CORE=y
CONFIG_MVEBU_DEVBUS=y
CONFIG_MVEBU_MBUS=y
CONFIG_MVMDIO=m
CONFIG_MVNETA_BM_ENABLE=m
CONFIG_MVNETA=m
CONFIG_MVPP2=m
CONFIG_MV_XOR=y
CONFIG_MWAVE=m
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_PCIE=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_USB=m
CONFIG_MWL8K=m
# CONFIG_MX3_IPU_IRQS is not set
# CONFIG_MX3_IPU is not set
# CONFIG_MXC4005 is not set
# CONFIG_MXC6255 is not set
# CONFIG_MXC_DEBUG_BOARD is not set
CONFIG_MXS_DMA=y
CONFIG_MYRI10GE_DCA=y
CONFIG_MYRI10GE=m
CONFIG_NAMESPACES=y
CONFIG_NATIONAL_PHY=m
CONFIG_NATSEMI=m
# CONFIG_NAU7802 is not set
# CONFIG_NBPFAXI_DMA is not set
# CONFIG_NCP_FS is not set
# CONFIG_ND_BLK is not set
CONFIG_NE2K_PCI=m
CONFIG_NEON=y
# CONFIG_NET_9P_DEBUG is not set
CONFIG_NET_9P=m
Disable Infiniband/RDMA on ARMv7 as we no longer have userspace tools
2017-08-31 17:35:16 +00:00
# CONFIG_NET_9P_RDMA is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NET_9P_VIRTIO=m
Linux v4.11-8539-gaf82455
2017-05-05 18:07:47 +00:00
CONFIG_NET_9P_XEN=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NET_ACT_BPF=m
CONFIG_NET_ACT_CONNMARK=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_ACT_GACT=m
CONFIG_NET_ACT_IFE=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_POLICE=m
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
CONFIG_NET_ACT_SAMPLE=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_SKBMOD=m
CONFIG_NET_ACT_TUNNEL_KEY=m
CONFIG_NET_ACT_VLAN=m
CONFIG_NET_CADENCE=y
CONFIG_NET_CALXEDA_XGMAC=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_U32=m
CONFIG_NET_CLS=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETCONSOLE=m
CONFIG_NET_CORE=y
# CONFIG_NET_DCCPPROBE is not set
CONFIG_NETDEVICES=y
CONFIG_NET_DEVLINK=m
Linux v4.15-6064-g255442c93843
2018-02-01 21:50:49 +00:00
# CONFIG_NETDEVSIM is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NET_DROP_MONITOR=y
CONFIG_NET_DSA_BCM_SF2=m
CONFIG_NET_DSA_HWMON=y
Linux v4.15-6064-g255442c93843
2018-02-01 21:50:49 +00:00
# CONFIG_NET_DSA_LEGACY is not set
Linux v4.11-4395-g89c9fea
2017-05-03 17:50:25 +00:00
CONFIG_NET_DSA_LOOP=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NET_DSA=m
Linux v4.11-4395-g89c9fea
2017-05-03 17:50:25 +00:00
CONFIG_NET_DSA_MT7530=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NET_DSA_MV88E6060=m
CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
CONFIG_NET_DSA_MV88E6XXX=m
Linux v4.16-5456-g17dec0a94915
2018-04-04 17:45:22 +00:00
CONFIG_NET_DSA_MV88E6XXX_PTP=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NET_DSA_QCA8K=m
Linux v4.11-4395-g89c9fea
2017-05-03 17:50:25 +00:00
CONFIG_NET_DSA_SMSC_LAN9303_I2C=m
CONFIG_NET_DSA_SMSC_LAN9303_MDIO=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NET_EMATCH_CANID=m
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_IPSET=m
Linux v4.16-5456-g17dec0a94915
2018-04-04 17:45:22 +00:00
CONFIG_NET_EMATCH_IPT=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH=y
CONFIG_NET_FC=y
CONFIG_NETFILTER_ADVANCED=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK_ACCT=m
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_NETFILTER_XT_MATCH_STATE=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_SET=m
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER=y
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_NET_FOU=m
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
CONFIG_NET_IFE=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NET_IFE_SKBMARK=m
CONFIG_NET_IFE_SKBPRIO=m
CONFIG_NET_IFE_SKBTCINDEX=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPIP=m
CONFIG_NET_IPVTI=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
Enable CONFIG_NET_L3_MASTER_DEV (rhbz 1428530)
2017-03-02 19:03:47 +00:00
CONFIG_NET_L3_MASTER_DEV=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NETLABEL=y
CONFIG_NETLINK_DIAG=m
CONFIG_NET_MPLS_GSO=m
CONFIG_NET_NCSI=y
Linux v4.13-6657-g3b9f8ed25dbe
2017-09-07 21:18:25 +00:00
CONFIG_NET_NSH=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NET_NS=y
CONFIG_NET_PACKET_ENGINE=y
CONFIG_NET_PKTGEN=m
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_NETROM=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_CBQ=m
Linux v4.14-9248-ge60e1ee60630
2017-11-16 17:50:37 +00:00
CONFIG_NET_SCH_CBS=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_CODEL=m
Linux v4.11-4395-g89c9fea
2017-05-03 17:50:25 +00:00
# CONFIG_NET_SCH_DEFAULT is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_PIE=m
CONFIG_NET_SCH_PLUG=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCTPPROBE=m
CONFIG_NET_SWITCHDEV=y
# CONFIG_NET_TCPPROBE is not set
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
# CONFIG_NET_TULIP is not set
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_NET_VENDOR_AGERE=y
Linux v4.9-2682-ge7aa8c2 (missing secure boot as that is being rebased to the new upstream tree
2016-12-13 22:26:04 +00:00
# CONFIG_NET_VENDOR_ALACRITECH is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NET_VENDOR_ALLWINNER=y
CONFIG_NET_VENDOR_ALTEON=y
Enable ena driver
2017-04-07 14:25:16 +00:00
CONFIG_NET_VENDOR_AMAZON=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NET_VENDOR_AMD=y
Enable aQuantia ethernet devices [labbott: Rebased]
2017-07-27 14:21:20 +00:00
CONFIG_NET_VENDOR_AQUANTIA=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_NET_VENDOR_AURORA is not set
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_NET_VENDOR_BROADCOM=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_NET_VENDOR_CHELSIO=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_CISCO is not set
ARM doesn't support the Gemini SoCs
2018-02-10 15:26:17 +00:00
# CONFIG_NET_VENDOR_CORTINA is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_NET_VENDOR_DEC is not set
CONFIG_NET_VENDOR_DLINK=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_NET_VENDOR_EMULEX=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_FARADAY is not set
CONFIG_NET_VENDOR_FREESCALE=y
# CONFIG_NET_VENDOR_FUJITSU is not set
# CONFIG_NET_VENDOR_HISILICON is not set
# CONFIG_NET_VENDOR_HP is not set
Linux v4.13-6657-g3b9f8ed25dbe
2017-09-07 21:18:25 +00:00
# CONFIG_NET_VENDOR_HUAWEI is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_NET_VENDOR_INTEL=y
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_NET_VENDOR_MICROCHIP is not set
CONFIG_NET_VENDOR_MYRI=y
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NET_VENDOR_NETRONOME=y
Linux v4.16-5456-g17dec0a94915
2018-04-04 17:45:22 +00:00
# CONFIG_NET_VENDOR_NI is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_NET_VENDOR_OKI=y
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
CONFIG_NET_VENDOR_RDC=y
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_NET_VENDOR_RENESAS is not set
CONFIG_NET_VENDOR_ROCKER=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_NET_VENDOR_SILAN=y
CONFIG_NET_VENDOR_SIS=y
CONFIG_NET_VENDOR_SMSC=y
Initial support for Socionext Synquacer platform
2017-10-06 16:00:52 +00:00
# CONFIG_NET_VENDOR_SNI is not set
Linux v4.15-6064-g255442c93843
2018-02-01 21:50:49 +00:00
# CONFIG_NET_VENDOR_SOCIONEXT is not set
Linux v4.9-11815-ge93b1cc
2016-12-21 19:03:15 +00:00
# CONFIG_NET_VENDOR_SOLARFLARE is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_NET_VENDOR_TI=y
CONFIG_NET_VENDOR_VIA=y
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_NET_VENDOR_XIRCOM is not set
CONFIG_NET_VRF=m
initial srpm import
2010-07-29 23:46:31 +00:00
CONFIG_NETWORK_FILESYSTEMS=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETXEN_NIC=m
CONFIG_NET=y
CONFIG_NEW_LEDS=y
CONFIG_NFC_DIGITAL=m
# CONFIG_NFC_FDP is not set
CONFIG_NFC_HCI=m
CONFIG_NFC=m
CONFIG_NFC_MICROREAD_I2C=m
CONFIG_NFC_MICROREAD=m
# CONFIG_NFC_MRVL_I2C is not set
CONFIG_NFC_MRVL=m
# CONFIG_NFC_MRVL_SPI is not set
CONFIG_NFC_MRVL_USB=m
CONFIG_NFC_NCI=m
# CONFIG_NFC_NCI_SPI is not set
# CONFIG_NFC_NCI_UART is not set
CONFIG_NFC_NXP_NCI_I2C=m
CONFIG_NFC_NXP_NCI=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_IPV6=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_NF_CONNTRACK_PROCFS=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NFC_PN533_I2C=m
CONFIG_NFC_PN533=m
CONFIG_NFC_PN533_USB=m
CONFIG_NFC_PN544_I2C=m
CONFIG_NFC_PN544=m
CONFIG_NFC_PORT100=m
# CONFIG_NFC_S3FWRN5_I2C is not set
CONFIG_NFC_SHDLC=y
CONFIG_NFC_SIM=m
CONFIG_NFC_ST21NFCA_I2C=m
CONFIG_NFC_ST21NFCA=m
# CONFIG_NFC_ST95HF is not set
# CONFIG_NFC_ST_NCI_I2C is not set
# CONFIG_NFC_ST_NCI is not set
# CONFIG_NFC_ST_NCI_SPI is not set
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NF_CT_NETLINK=m
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
Linux v4.9-2682-ge7aa8c2 (missing secure boot as that is being rebased to the new upstream tree
2016-12-13 22:26:04 +00:00
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NFC_TRF7970A=m
CONFIG_NFC_WILINK=m
CONFIG_NF_DUP_IPV4=m
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_DUP_NETDEV=m
Linux v4.15-6064-g255442c93843
2018-02-01 21:50:49 +00:00
CONFIG_NF_FLOW_TABLE_INET=m
CONFIG_NF_FLOW_TABLE_IPV4=m
CONFIG_NF_FLOW_TABLE_IPV6=m
CONFIG_NF_FLOW_TABLE=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_BRIDGE=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_LOG_IPV6=m
Linux v4.9-2682-ge7aa8c2 (missing secure boot as that is being rebased to the new upstream tree
2016-12-13 22:26:04 +00:00
CONFIG_NF_LOG_NETDEV=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NF_NAT=m
CONFIG_NF_NAT_SNMP_BASIC=m
Linux v4.12-6090-g9b51f04
2017-07-06 16:11:57 +00:00
CONFIG_NFP_APP_FLOWER=y
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
# CONFIG_NFP_DEBUG is not set
CONFIG_NFP=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
# CONFIG_NFP_NET_DEBUG is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NFP_NETVF=m
CONFIG_NF_REJECT_IPV6=m
Linux v4.5-12596-g11caf57f6a4b - asm-generic, pm+acpi, rtc, hwmon, block, mtd, ubifs, nfsd, kbuild, parisc, h8, arm64, armsoc
2016-03-25 14:19:40 +00:00
CONFIG_NFSD_BLOCKLAYOUT=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_NFSD_FLEXFILELAYOUT=y
CONFIG_NFSD=m
CONFIG_NFSD_PNFS=y
CONFIG_NFSD_SCSILAYOUT=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4_SECURITY_LABEL=y
CONFIG_NFSD_V4=y
CONFIG_NFS_FSCACHE=y
CONFIG_NFS_FS=m
Linux v4.9-2682-ge7aa8c2 (missing secure boot as that is being rebased to the new upstream tree
2016-12-13 22:26:04 +00:00
CONFIG_NF_SOCKET_IPV4=m
CONFIG_NF_SOCKET_IPV6=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NFS_SWAP=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3_ACL=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_NFS_V3=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_NFS_V4=m
Linux v4.16-5456-g17dec0a94915
2018-04-04 17:45:22 +00:00
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_TABLES_BRIDGE=y
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_IPV4=y
CONFIG_NF_TABLES_IPV6=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NF_TABLES=m
Linux v4.16-5456-g17dec0a94915
2018-04-04 17:45:22 +00:00
CONFIG_NF_TABLES_NETDEV=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_COUNTER=m
CONFIG_NFT_CT=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_EXTHDR=m
Linux v4.9-2682-ge7aa8c2 (missing secure boot as that is being rebased to the new upstream tree
2016-12-13 22:26:04 +00:00
CONFIG_NFT_FIB_INET=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NFT_FIB_IPV6=m
Linux v4.13-6657-g3b9f8ed25dbe
2017-09-07 21:18:25 +00:00
CONFIG_NFT_FIB_NETDEV=m
Linux v4.15-6064-g255442c93843
2018-02-01 21:50:49 +00:00
CONFIG_NFT_FLOW_OFFLOAD=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_HASH=m
CONFIG_NFT_LIMIT=m
# CONFIG_NFTL is not set
CONFIG_NFT_LOG=m
CONFIG_NFT_MASQ_IPV4=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_META=m
CONFIG_NFT_NAT=m
CONFIG_NFT_NUMGEN=m
Linux v4.9-2682-ge7aa8c2 (missing secure boot as that is being rebased to the new upstream tree
2016-12-13 22:26:04 +00:00
CONFIG_NFT_OBJREF=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NFT_QUEUE=m
CONFIG_NFT_QUOTA=m
CONFIG_NFT_RBTREE=m
CONFIG_NFT_REDIR_IPV4=m
CONFIG_NFT_REDIR_IPV6=m
CONFIG_NFT_REDIR=m
CONFIG_NFT_REJECT_IPV4=m
CONFIG_NFT_REJECT=m
Linux v4.9-2682-ge7aa8c2 (missing secure boot as that is being rebased to the new upstream tree
2016-12-13 22:26:04 +00:00
CONFIG_NFT_RT=m
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
CONFIG_NFT_SET_BITMAP=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NFT_SET_HASH=m
CONFIG_NFT_SET_RBTREE=m
CONFIG_N_GSM=m
CONFIG_N_HDLC=m
# CONFIG_NI903X_WDT is not set
CONFIG_NILFS2_FS=m
CONFIG_NIU=m
# CONFIG_NL80211_TESTMODE is not set
CONFIG_NL80211=y
CONFIG_NLMON=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
initial srpm import
2010-07-29 23:46:31 +00:00
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NLS_CODEPAGE_874=m
initial srpm import
2010-07-29 23:46:31 +00:00
CONFIG_NLS_CODEPAGE_932=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NLS_CODEPAGE_936=m
initial srpm import
2010-07-29 23:46:31 +00:00
CONFIG_NLS_CODEPAGE_949=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
initial srpm import
2010-07-29 23:46:31 +00:00
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NLS_ISO8859_8=m
initial srpm import
2010-07-29 23:46:31 +00:00
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
Linux v3.4-10115-g829f51d
2012-06-02 11:56:45 +00:00
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NLS_MAC_ROMAN=m
Linux v3.4-10115-g829f51d
2012-06-02 11:56:45 +00:00
CONFIG_NLS_MAC_TURKISH=m
initial srpm import
2010-07-29 23:46:31 +00:00
CONFIG_NLS_UTF8=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NLS=y
CONFIG_NMI_LOG_BUF_SHIFT=13
CONFIG_NO_HZ=y
CONFIG_NOP_USB_XCEIV=m
CONFIG_NORTEL_HERMES=m
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
Linux v4.14-9248-ge60e1ee60630
2017-11-16 17:50:37 +00:00
# CONFIG_NOUVEAU_DEBUG_MMU is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NOUVEAU_PLATFORM_DRIVER=y
CONFIG_NOZOMI=m
CONFIG_NR_CPUS=32
Linux v4.11-10603-g13e0988
2017-05-08 17:38:14 +00:00
CONFIG_NR_DEV_DAX=32768
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NS83820=m
Linux v4.13-rc1
2017-07-17 15:39:06 +00:00
CONFIG_NTB_IDT=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_NTB is not set
Linux v4.14-12891-gc8a0739b185d Also turn off a powerpc crypto drive that was failing to compile
2017-11-20 18:00:57 +00:00
CONFIG_NTB_SWITCHTEC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_NTFS_FS is not set
CONFIG_NTP_PPS=y
CONFIG_NVEC_PAZ00=y
CONFIG_NVEC_POWER=y
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_NVME_FC=m
Linux v4.11-8539-gaf82455
2017-05-05 18:07:47 +00:00
CONFIG_NVMEM_IMX_IIM=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NVMEM_IMX_OCOTP=m
Linux v4.14-12375-g2dcd9c71c1ff
2017-11-18 01:09:35 +00:00
# CONFIG_NVMEM_SNVS_LPGPR is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NVMEM_SUNXI_SID=m
Linux v4.14-4050-g37cb8e1f8e10
2017-11-15 17:40:48 +00:00
CONFIG_NVME_MULTIPATH=y
Linux v4.16-7248-g06dd3dfeea60
2018-04-05 17:30:09 +00:00
CONFIG_NVMEM=y
Disable Infiniband/RDMA on ARMv7 as we no longer have userspace tools
2017-08-31 17:35:16 +00:00
# CONFIG_NVME_RDMA is not set
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_NVME_TARGET_FCLOOP=m
CONFIG_NVME_TARGET_FC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_NVME_TARGET_LOOP=m
CONFIG_NVME_TARGET=m
Disable Infiniband/RDMA on ARMv7 as we no longer have userspace tools
2017-08-31 17:35:16 +00:00
# CONFIG_NVME_TARGET_RDMA is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_NVM is not set
# CONFIG_NVRAM is not set
# CONFIG_OABI_COMPAT is not set
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_FS is not set
CONFIG_OCFS2_FS_O2CB=m
# CONFIG_OCFS2_FS_STATS is not set
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OF_ADDRESS=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IOMMU=y
CONFIG_OF_IRQ=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_OF_MDIO=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_OF_NET=y
CONFIG_OF_OVERLAY=y
Linux v4.16-11490-gb284d4d5a678
2018-04-11 16:12:16 +00:00
CONFIG_OF_PMEM=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF=y
# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
# CONFIG_OMAP2_DSS_DEBUGFS is not set
# CONFIG_OMAP2_DSS_DEBUG is not set
CONFIG_OMAP2_DSS_DPI=y
CONFIG_OMAP2_DSS_DSI=y
CONFIG_OMAP2_DSS=m
CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
CONFIG_OMAP2_DSS_RFBI=y
CONFIG_OMAP2_DSS_SDI=y
CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y
CONFIG_OMAP2_DSS_VENC=y
CONFIG_OMAP2PLUS_MBOX=m
CONFIG_OMAP2_VRFB=y
CONFIG_OMAP_32K_TIMER=y
# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
# CONFIG_OMAP3_SDRC_AC_TIMING is not set
# CONFIG_OMAP3_THERMAL is not set
Linux v4.14-9248-ge60e1ee60630
2017-11-16 17:50:37 +00:00
CONFIG_OMAP4_DSS_HDMI_CEC=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_OMAP4_DSS_HDMI=y
CONFIG_OMAP4_THERMAL=y
CONFIG_OMAP5_DSS_HDMI=y
CONFIG_OMAP5_ERRATA_801819=y
CONFIG_OMAP5_THERMAL=y
CONFIG_OMAP_CONTROL_PHY=m
# CONFIG_OMAP_GPMC_DEBUG is not set
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_OMAP_INTERCONNECT=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_OMAP_IOMMU_DEBUG is not set
CONFIG_OMAP_IOMMU=y
CONFIG_OMAP_MBOX_KFIFO_SIZE=256
CONFIG_OMAP_MUX_WARNINGS=y
CONFIG_OMAP_MUX=y
CONFIG_OMAP_OCP2SCP=m
CONFIG_OMAP_PACKAGE_CBB=y
CONFIG_OMAP_PACKAGE_CUS=y
CONFIG_OMAP_REMOTEPROC=m
CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_OMAP_USB2=m
CONFIG_OMAP_WATCHDOG=m
# CONFIG_OMFS_FS is not set
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_OPENVSWITCH_GENEVE=m
CONFIG_OPENVSWITCH_GRE=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_OPENVSWITCH=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_OPENVSWITCH_VXLAN=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_OPROFILE is not set
CONFIG_OPT3001=m
CONFIG_OPTIMIZE_INLINING=y
CONFIG_OPTPROBES=y
CONFIG_ORANGEFS_FS=m
CONFIG_ORINOCO_USB=m
CONFIG_ORION_WATCHDOG=m
CONFIG_OSF_PARTITION=y
Linux v4.12-10985-g4ca6df134847
2017-07-13 14:16:31 +00:00
# CONFIG_OVERLAY_FS_INDEX is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_OVERLAY_FS=m
Linux v4.15-rc4
2017-12-18 17:27:37 +00:00
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
Linux v4.9-11744-gb0b3a37
2016-12-19 21:11:15 +00:00
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_P54_COMMON=m
CONFIG_P54_PCI=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
# CONFIG_P54_SPI_DEFAULT_EEPROM is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_P54_SPI=m
CONFIG_P54_USB=m
CONFIG_PA12203001=m
CONFIG_PACKET_DIAG=m
CONFIG_PACKET=y
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_PALMAS_GPADC=m
# CONFIG_PANEL is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_TIMEOUT=0
CONFIG_PANTHERLORD_FF=y
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT=y
# CONFIG_PARIDE is not set
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
CONFIG_PARMAN=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_PARPORT is not set
Only build ParPort support on x86, ARM and s390x long disabled it, only PPC HW that shipped it was long prior to anything we remotely support
2017-09-09 14:15:44 +00:00
# CONFIG_PARPORT_PC is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PARTITION_ADVANCED=y
disable a number of unused PATA/SATA drivers on ARM, don't build x86 specific drivers on other arches, minor tweaks to other arch specific configs
2017-10-01 18:33:34 +00:00
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARASAN_CF is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_PATA_HPT3X3_DMA is not set
disable a number of unused PATA/SATA drivers on ARM, don't build x86 specific drivers on other arches, minor tweaks to other arch specific configs
2017-10-01 18:33:34 +00:00
# CONFIG_PATA_HPT3X3 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PATA_IMX=m
disable a number of unused PATA/SATA drivers on ARM, don't build x86 specific drivers on other arches, minor tweaks to other arch specific configs
2017-10-01 18:33:34 +00:00
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_PATA_LEGACY is not set
CONFIG_PATA_MARVELL=m
disable a number of unused PATA/SATA drivers on ARM, don't build x86 specific drivers on other arches, minor tweaks to other arch specific configs
2017-10-01 18:33:34 +00:00
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_OPTI is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PATA_PCMCIA=m
disable a number of unused PATA/SATA drivers on ARM, don't build x86 specific drivers on other arches, minor tweaks to other arch specific configs
2017-10-01 18:33:34 +00:00
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RADISYS is not set
disable a number of unused PATA/SATA drivers on ARM, don't build x86 specific drivers on other arches, minor tweaks to other arch specific configs
2017-10-01 18:33:34 +00:00
# CONFIG_PATA_RDC is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
disable a number of unused PATA/SATA drivers on ARM, don't build x86 specific drivers on other arches, minor tweaks to other arch specific configs
2017-10-01 18:33:34 +00:00
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
# CONFIG_PC104 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_PC87413_WDT is not set
CONFIG_PCCARD=y
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
# CONFIG_PCH_GBE is not set
CONFIG_PCI_AARDVARK=y
# CONFIG_PCI_DEBUG is not set
minor config cleanups
2017-05-12 12:08:25 +00:00
# CONFIG_PCI_DRA7XX_EP is not set
# CONFIG_PCI_DRA7XX_HOST is not set
# CONFIG_PCI_DRA7XX is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEAER=y
# CONFIG_PCIE_ALTERA is not set
# CONFIG_PCIE_ARMADA_8K is not set
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM=y
Linux v4.15-11704-ga2e5790d8416
2018-02-07 15:13:24 +00:00
CONFIG_PCIE_CADENCE_HOST=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PCIE_DPC=y
Initial support for Socionext Synquacer platform
2017-10-06 16:00:52 +00:00
# CONFIG_PCIE_DW_HOST_ECAM is not set
minor cleanup, add explicit declare of a couple of options
2017-05-15 08:19:07 +00:00
CONFIG_PCIE_DW_HOST=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_PCIE_DW_PLAT is not set
CONFIG_PCIE_DW=y
CONFIG_PCIE_ECRC=y
Linux v4.14-9248-ge60e1ee60630
2017-11-16 17:50:37 +00:00
CONFIG_PCIE_HISI_STB=y
Various ARM updates
2017-05-24 11:27:01 +00:00
# CONFIG_PCI_ENDPOINT is not set
Linux v4.11-11413-g2868b25
2017-05-09 15:45:07 +00:00
# CONFIG_PCI_ENDPOINT_TEST is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PCIEPORTBUS=y
CONFIG_PCIE_PTM=y
CONFIG_PCIE_QCOM=y
CONFIG_PCIE_ROCKCHIP=y
CONFIG_PCIE_XILINX=y
CONFIG_PCI_EXYNOS=y
Linux v4.11-11413-g2868b25
2017-05-09 15:45:07 +00:00
# CONFIG_PCI_FTPCI100 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PCI_HERMES=m
CONFIG_PCI_HOST_GENERIC=y
CONFIG_PCI_IMX6=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_LAYERSCAPE is not set
minor cleanup, add explicit declare of a couple of options
2017-05-15 08:19:07 +00:00
CONFIG_PCI_MSI_IRQ_DOMAIN=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PCI_MSI=y
CONFIG_PCI_MVEBU=y
CONFIG_PCI_PASID=y
CONFIG_PCIPCWATCHDOG=m
CONFIG_PCI_PRI=y
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
Linux v4.11-11413-g2868b25
2017-05-09 15:45:07 +00:00
CONFIG_PCI_SW_SWITCHTEC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PCI_TEGRA=y
Linux v4.14-9248-ge60e1ee60630
2017-11-16 17:50:37 +00:00
CONFIG_PCI_V3_SEMI=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PCI=y
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_AXNET=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_HERMES=m
# CONFIG_PCMCIA is not set
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_PCNET=m
# CONFIG_PCMCIA_RAYCS is not set
CONFIG_PCMCIA_SMC91C92=m
# CONFIG_PCMCIA_SPECTRUM is not set
# CONFIG_PCMCIA_WL3501 is not set
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_PCNET32=m
CONFIG_PD6729=m
CONFIG_PDA_POWER=m
CONFIG_PDC_ADMA=m
Linux v4.12-7934-g9f45efb
2017-07-07 14:59:21 +00:00
# CONFIG_PERCPU_STATS is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_PERCPU_TEST is not set
CONFIG_PERF_EVENTS=y
CONFIG_PERSISTENT_KEYRINGS=y
# CONFIG_PGTABLE_MAPPING is not set
# CONFIG_PHANTOM is not set
# CONFIG_PHONE is not set
# CONFIG_PHONET is not set
Linux v4.12-3441-g1996454
2017-07-05 16:00:04 +00:00
# CONFIG_PHY_CPCAP_USB is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_PHY_DM816X_USB is not set
CONFIG_PHY_EXYNOS5250_SATA=m
CONFIG_PHY_EXYNOS5_USBDRD=m
CONFIG_PHY_EXYNOS_DP_VIDEO=m
CONFIG_PHY_EXYNOS_MIPI_VIDEO=m
- Enable Tiny DRM on ARM platforms - ARM config updates - General config cleanups - Add patch to fix desktop lockups on RPi (vc4) RHBZ# 1389163
2017-03-01 12:12:17 +00:00
CONFIG_PHY_EXYNOS_PCIE=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PHYLIB=y
Enable Physlink/SFP functionality, minor cleanups, Tegra DRM FTB fix
2017-09-12 17:26:40 +00:00
CONFIG_PHYLINK=m
Linux v4.16-7248-g06dd3dfeea60
2018-04-05 17:30:09 +00:00
# CONFIG_PHY_MAPPHONE_MDM6600 is not set
Enable Amlogic (meson) SoCs for ARMv7/aarch64
2016-12-27 04:15:07 +00:00
CONFIG_PHY_MESON8B_USB2=m
Linux v4.12-3441-g1996454
2017-07-05 16:00:04 +00:00
# CONFIG_PHY_MESON_GXL_USB2 is not set
Linux v4.16-7248-g06dd3dfeea60
2018-04-05 17:30:09 +00:00
CONFIG_PHY_MESON_GXL_USB3=m
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_PHY_MIPHY28LP=m
# CONFIG_PHY_MIPHY365X is not set
minor cleanups
2017-10-15 16:19:59 +00:00
# CONFIG_PHY_MVEBU_CP110_COMPHY is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PHY_MVEBU_SATA=y
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
CONFIG_PHY_QCOM_APQ8064_SATA=m
# CONFIG_PHY_QCOM_IPQ806X_SATA is not set
Linux v4.11-8539-gaf82455
2017-05-05 18:07:47 +00:00
CONFIG_PHY_QCOM_QMP=m
CONFIG_PHY_QCOM_QUSB2=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PHY_QCOM_UFS=m
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
CONFIG_PHY_QCOM_USB_HSIC=m
CONFIG_PHY_QCOM_USB_HS=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PHY_ROCKCHIP_DP=m
CONFIG_PHY_ROCKCHIP_EMMC=m
CONFIG_PHY_ROCKCHIP_INNO_USB2=m
CONFIG_PHY_ROCKCHIP_PCIE=m
CONFIG_PHY_ROCKCHIP_TYPEC=m
CONFIG_PHY_ROCKCHIP_USB=m
CONFIG_PHY_SAMSUNG_USB2=m
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_PHY_STIH407_USB=m
# CONFIG_PHY_STIH41X_USB is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_PHY_ST_SPEAR1310_MIPHY is not set
# CONFIG_PHY_ST_SPEAR1340_MIPHY is not set
CONFIG_PHY_SUN4I_USB=m
CONFIG_PHY_SUN9I_USB=m
CONFIG_PHY_TEGRA_XUSB=m
# CONFIG_PHY_TUSB1210 is not set
Linux v4.13-4257-ge7d0c41ecc2e
2017-09-06 18:29:50 +00:00
# CONFIG_PI433 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_PID_IN_CONTEXTIDR is not set
CONFIG_PID_NS=y
CONFIG_PINCONF=y
# CONFIG_PINCTRL_AMD is not set
CONFIG_PINCTRL_APQ8064=m
CONFIG_PINCTRL_APQ8084=m
CONFIG_PINCTRL_ARMADA_370=y
CONFIG_PINCTRL_ARMADA_XP=y
CONFIG_PINCTRL_AS3722=y
Linux v4.15-6064-g255442c93843
2018-02-01 21:50:49 +00:00
CONFIG_PINCTRL_AXP209=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_PINCTRL_BAYTRAIL is not set
# CONFIG_PINCTRL_BROXTON is not set
Linux v4.12-7934-g9f45efb
2017-07-07 14:59:21 +00:00
# CONFIG_PINCTRL_CANNONLAKE is not set
Linux v4.14-12375-g2dcd9c71c1ff
2017-11-18 01:09:35 +00:00
CONFIG_PINCTRL_CEDARFORK=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_PINCTRL_CHERRYVIEW is not set
CONFIG_PINCTRL_DOVE=y
Linux v4.10-2512-g7bb0338
2017-02-22 15:39:25 +00:00
# CONFIG_PINCTRL_GEMINILAKE is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PINCTRL_IMX6SL=y
# CONFIG_PINCTRL_IPQ4019 is not set
# CONFIG_PINCTRL_IPQ8064 is not set
Linux v4.12-7934-g9f45efb
2017-07-07 14:59:21 +00:00
# CONFIG_PINCTRL_IPQ8074 is not set
# CONFIG_PINCTRL_MCP23S08 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_PINCTRL_MDM9615 is not set
Linux v4.14-12375-g2dcd9c71c1ff
2017-11-18 01:09:35 +00:00
# CONFIG_PINCTRL_MESON8B is not set
# CONFIG_PINCTRL_MESON8 is not set
# CONFIG_PINCTRL_MESON_GXBB is not set
# CONFIG_PINCTRL_MESON_GXL is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PINCTRL_MSM8660=m
CONFIG_PINCTRL_MSM8916=m
CONFIG_PINCTRL_MSM8960=m
Config improvements for Qualcomm devices
2017-06-26 22:32:58 +00:00
# CONFIG_PINCTRL_MSM8994 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_PINCTRL_MSM8996 is not set
Linux v4.15-10668-g35277995e179
2018-02-05 18:54:33 +00:00
CONFIG_PINCTRL_MSM8998=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PINCTRL_MSM8X74=m
CONFIG_PINCTRL_MVEBU=y
CONFIG_PINCTRL_PALMAS=y
CONFIG_PINCTRL_QCOM_SPMI_PMIC=m
CONFIG_PINCTRL_QCOM_SSBI_PMIC=m
Linux v4.13-9219-g015a9e66b9b8
2017-09-08 22:21:55 +00:00
CONFIG_PINCTRL_RK805=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_PINCTRL_SAMSUNG=y
Linux v4.16-5456-g17dec0a94915
2018-04-04 17:45:22 +00:00
# CONFIG_PINCTRL_SDM845 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PINCTRL_SINGLE=y
Linux v4.13-4257-ge7d0c41ecc2e
2017-09-06 18:29:50 +00:00
# CONFIG_PINCTRL_SPRD is not set
# CONFIG_PINCTRL_SPRD_SC9860 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_PINCTRL_SUNRISEPOINT is not set
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
# CONFIG_PINCTRL_SX150X is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PINCTRL=y
CONFIG_PINCTRL_ZYNQ=y
CONFIG_PINMUX=y
CONFIG_PJ4B_ERRATA_4742=y
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_PL310_ERRATA_588369=y
CONFIG_PL310_ERRATA_727915=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PL310_ERRATA_753970=y
CONFIG_PL310_ERRATA_769419=y
CONFIG_PL320_MBOX=y
CONFIG_PL330_DMA=m
Enable Amlogic (meson) SoCs for ARMv7/aarch64
2016-12-27 04:15:07 +00:00
CONFIG_PLATFORM_MHU=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_PLATFORM_SI4713 is not set
# CONFIG_PLAT_SPEAR is not set
# CONFIG_PLIP is not set
CONFIG_PLX_HERMES=m
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_AUTOSLEEP is not set
CONFIG_PMBUS=m
CONFIG_PM_DEBUG=y
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_PM_DEVFREQ=y
CONFIG_PM_GENERIC_DOMAINS_OF=y
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PM_OPP=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_TEST_SUSPEND=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_TRACE=y
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_OBJLAYOUT=m
CONFIG_POSIX_MQUEUE=y
CONFIG_POWER_AVS_OMAP_CLASS3=y
CONFIG_POWER_AVS_OMAP=y
CONFIG_POWER_AVS=y
CONFIG_POWERCAP=y
CONFIG_POWER_RESET_AS3722=y
# CONFIG_POWER_RESET_BRCMKONA is not set
# CONFIG_POWER_RESET_BRCMSTB is not set
CONFIG_POWER_RESET_GPIO_RESTART=y
CONFIG_POWER_RESET_GPIO=y
# CONFIG_POWER_RESET_LTC2952 is not set
CONFIG_POWER_RESET_MSM=y
# CONFIG_POWER_RESET_QNAP is not set
CONFIG_POWER_RESET_RESTART=y
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_POWER_RESET_ST=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_VERSATILE=y
CONFIG_POWER_RESET_VEXPRESS=y
CONFIG_POWER_RESET=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY=y
Linux v4.9-11744-gb0b3a37
2016-12-19 21:11:15 +00:00
# CONFIG_PPC_PTDUMP is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PPDEV=m
CONFIG_PPP_ASYNC=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_PPP_BSDCOMP=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP=m
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPS_CLIENT_GPIO=m
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
# CONFIG_PPS_DEBUG is not set
Linux v4.16-5456-g17dec0a94915
2018-04-04 17:45:22 +00:00
CONFIG_PPS=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PPTP=m
Config options for non debug kernels
2017-11-21 18:44:40 +00:00
# CONFIG_PREEMPTIRQ_EVENTS is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_PREEMPT is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_PRINTER=m
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PRINTK_TIME=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_PRISM54 is not set
CONFIG_PROC_CHILDREN=y
CONFIG_PROC_EVENTS=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_PROC_VMCORE=y
initial srpm import
2010-07-29 23:46:31 +00:00
CONFIG_PROFILING=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_PROVE_LOCKING is not set
# CONFIG_PROVE_RCU_REPEATEDLY is not set
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
CONFIG_PSAMPLE=m
Linux v4.16-10608-gf8cf2f16a7c9
2018-04-09 16:22:00 +00:00
CONFIG_PSTORE_842_COMPRESS=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_PSTORE_CONSOLE is not set
Linux v4.16-10608-gf8cf2f16a7c9
2018-04-09 16:22:00 +00:00
CONFIG_PSTORE_DEFLATE_COMPRESS=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_PSTORE_FTRACE is not set
Linux v4.16-10608-gf8cf2f16a7c9
2018-04-09 16:22:00 +00:00
CONFIG_PSTORE_LZ4_COMPRESS=m
CONFIG_PSTORE_LZ4HC_COMPRESS=m
CONFIG_PSTORE_LZO_COMPRESS=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_PSTORE_PMSG is not set
CONFIG_PSTORE_RAM=m
CONFIG_PSTORE=y
CONFIG_PTP_1588_CLOCK_PCH=m
Linux v4.16-5456-g17dec0a94915
2018-04-04 17:45:22 +00:00
CONFIG_PTP_1588_CLOCK=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PWM_BCM2835=m
CONFIG_PWM_CROS_EC=m
# CONFIG_PWM_FSL_FTM is not set
Linux v4.9-10415-g73e2e0c
2016-12-16 15:42:31 +00:00
CONFIG_PWM_HIBVT=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PWM_IMX=m
Enable Amlogic (meson) SoCs for ARMv7/aarch64
2016-12-27 04:15:07 +00:00
CONFIG_PWM_MESON=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PWM_OMAP_DMTIMER=m
# CONFIG_PWM_PCA9685 is not set
CONFIG_PWM_ROCKCHIP=m
CONFIG_PWM_SAMSUNG=m
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_PWM_STI=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_PWM_STMPE is not set
CONFIG_PWM_SUN4I=m
CONFIG_PWM_SYSFS=y
CONFIG_PWM_TEGRA=m
CONFIG_PWM_TIECAP=m
CONFIG_PWM_TIEHRPWM=m
CONFIG_PWM_TIPWMSS=y
CONFIG_PWM_TWL_LED=m
CONFIG_PWM_TWL=m
CONFIG_PWM=y
Raspberry Pi serial console fixes, minor other Pi improvements, Various ARM cleanups, build mmc/pwrseq non modular
2017-09-11 18:17:30 +00:00
CONFIG_PWRSEQ_EMMC=y
CONFIG_PWRSEQ_SD8787=m
CONFIG_PWRSEQ_SIMPLE=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_PXA_DMA=y
Enable QDF2400 Onboard Networking
2016-12-19 22:42:05 +00:00
# CONFIG_QCA7000 is not set
Linux v4.12-6090-g9b51f04
2017-07-06 16:11:57 +00:00
# CONFIG_QCA7000_SPI is not set
# CONFIG_QCA7000_UART is not set
Linux v4.15-9939-g4bf772b14675
2018-02-02 20:38:32 +00:00
CONFIG_QCOM_A53PLL=m
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_QCOM_ADSP_PIL=m
Linux v4.12-10317-gaf3c8d9
2017-07-10 15:40:53 +00:00
CONFIG_QCOM_APCS_IPC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_QCOM_BAM_DMA=m
Linux v4.15-9939-g4bf772b14675
2018-02-02 20:38:32 +00:00
CONFIG_QCOM_CLK_APCS_MSM8916=m
Minor ARM config updates
2017-01-06 15:44:21 +00:00
CONFIG_QCOM_CLK_RPM=m
CONFIG_QCOM_CLK_SMD_RPM=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_QCOM_COINCELL=m
# CONFIG_QCOM_EBI2 is not set
Enable QDF2400 Onboard Networking
2016-12-19 22:42:05 +00:00
# CONFIG_QCOM_EMAC is not set
Linux v4.13-11197-gf007cad159e9
2017-09-11 18:05:08 +00:00
# CONFIG_QCOM_GLINK_SSR is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_QCOM_GSBI=m
# CONFIG_QCOM_HIDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
Add fix for Tegra GPU display with IOMMU, Add QCom IOMMU for Dragonboard display
2017-07-18 18:37:53 +00:00
CONFIG_QCOM_IOMMU=y
Linux v4.16-7248-g06dd3dfeea60
2018-04-05 17:30:09 +00:00
CONFIG_QCOM_PDC=y
Linux v4.11-10603-g13e0988
2017-05-08 17:38:14 +00:00
CONFIG_QCOM_PM8XXX_XOADC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_QCOM_PM=y
Various ARM updates
2017-05-24 11:27:01 +00:00
CONFIG_QCOM_Q6V5_PIL=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_QCOM_QFPROM=m
Linux v4.14-12375-g2dcd9c71c1ff
2017-11-18 01:09:35 +00:00
CONFIG_QCOM_RMTFS_MEM=m
# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_QCOM_SMD_RPM=m
CONFIG_QCOM_SMEM=m
CONFIG_QCOM_SMP2P=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_QCOM_SMSM=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_QCOM_SPMI_IADC=m
Various ARM updates
2017-05-24 11:27:01 +00:00
CONFIG_QCOM_SPMI_TEMP_ALARM=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_QCOM_SPMI_VADC=m
Linux v4.16-11490-gb284d4d5a678
2018-04-11 16:12:16 +00:00
CONFIG_QCOM_SYSMON=m
Minor ARM config updates
2017-01-06 15:44:21 +00:00
CONFIG_QCOM_TSENS=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_QCOM_WCNSS_CTRL=m
Various ARM updates
2017-05-24 11:27:01 +00:00
CONFIG_QCOM_WCNSS_PIL=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_QCOM_WDT=m
CONFIG_QEDE=m
Linux v4.11-rc1
2017-03-06 15:43:15 +00:00
CONFIG_QEDF=m
Linux v4.10-rc1 (didn't adjust debug options), ARM config updates, minor general config cleanups
2016-12-27 02:51:37 +00:00
CONFIG_QEDI=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_QED=m
CONFIG_QED_SRIOV=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC_DCB=y
CONFIG_QLCNIC_HWMON=y
CONFIG_QLCNIC=m
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLGE=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_QORIQ_CPUFREQ is not set
# CONFIG_QORIQ_THERMAL is not set
# CONFIG_QRTR is not set
CONFIG_QSEMI_PHY=m
Linux v4.12-6090-g9b51f04
2017-07-06 16:11:57 +00:00
CONFIG_QTNFMAC_PEARL_PCIE=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_QUOTACTL=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_QUOTA=y
CONFIG_R3964=m
CONFIG_R6040=m
CONFIG_R8169=m
CONFIG_R8188EU=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_R8712U=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_R8723AU=m # Jes Sorensen maintains this (rhbz 1100162)
Linux v4.14-rc7
2017-10-30 16:51:50 +00:00
CONFIG_R8822BE=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_AZTECH=m
CONFIG_RADIO_CADET=m
CONFIG_RADIO_GEMTEK=m
CONFIG_RADIO_MAXIRADIO=m
# CONFIG_RADIO_MIROPCM20 is not set
CONFIG_RADIO_RTRACK2=m
CONFIG_RADIO_RTRACK=m
CONFIG_RADIO_SAA7706H=m
CONFIG_RADIO_SF16FMI=m
CONFIG_RADIO_SF16FMR2=m
CONFIG_RADIO_SHARK2=m
CONFIG_RADIO_SHARK=m
CONFIG_RADIO_SI470X=y
CONFIG_RADIO_SI4713=m
CONFIG_RADIO_TEA5764=m
# CONFIG_RADIO_TEF6862 is not set
CONFIG_RADIO_TERRATEC=m
CONFIG_RADIO_TRUST=m
CONFIG_RADIO_TYPHOON=m
CONFIG_RADIO_WL1273=m
CONFIG_RADIO_ZOLTRIX=m
CONFIG_RAID_ATTRS=m
# CONFIG_RANDOM32_SELFTEST is not set
Linux v4.11-1464-gd3b5d35
2017-05-02 19:04:44 +00:00
CONFIG_RAS_CEC=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_RASPBERRYPI_FIRMWARE=y
CONFIG_RASPBERRYPI_POWER=y
Linux v4.15-1549-g6304672b7f0a
2018-01-30 18:26:27 +00:00
# CONFIG_RAVE_SP_CORE is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_RAW_DRIVER=y
# CONFIG_RBTREE_TEST is not set
CONFIG_RC_ATI_REMOTE=m
CONFIG_RC_CORE=m
CONFIG_RC_DECODERS=y
CONFIG_RC_DEVICES=y
CONFIG_RC_LOOPBACK=m
CONFIG_RC_MAP=m
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_RC_ST=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_RCU_EXPERT is not set
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_RCU_FAST_NO_HZ=y
CONFIG_RCU_KTHREAD_PRIO=0
CONFIG_RCU_NOCB_CPU_ALL=y
CONFIG_RCU_NOCB_CPU=y
# CONFIG_RCU_PERF_TEST is not set
CONFIG_RCU_TORTURE_TEST=m
# CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP is not set
CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY=3
# CONFIG_RCU_TORTURE_TEST_SLOW_INIT is not set
# CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RD_BZIP2=y
CONFIG_RD_GZIP=y
CONFIG_RD_LZ4=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
Disable Infiniband/RDMA on ARMv7 as we no longer have userspace tools
2017-08-31 17:35:16 +00:00
# CONFIG_RDMA_RXE is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_RDS_DEBUG is not set
# CONFIG_RDS is not set
Disable Infiniband/RDMA on ARMv7 as we no longer have userspace tools
2017-08-31 17:35:16 +00:00
# CONFIG_RDS_RDMA is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_RDS_TCP=m
CONFIG_RD_XZ=y
Linux v3.4-5161-g56edab3
2012-05-23 19:57:04 +00:00
# CONFIG_READABLE_ASM is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_REALTEK_AUTOPM=y
CONFIG_REALTEK_PHY=m
Linux v4.16-rc1
2018-02-12 13:31:25 +00:00
CONFIG_REFCOUNT_FULL=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_REGMAP_I2C=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_REGMAP_IRQ=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_SPI=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_REGMAP_SPMI=m
CONFIG_REGMAP=y
Linux v4.16-5456-g17dec0a94915
2018-04-04 17:45:22 +00:00
# CONFIG_REGULATOR_88PG86X is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_REGULATOR_88PM800 is not set
minor ARM cleanup
2017-06-09 17:08:09 +00:00
CONFIG_REGULATOR_ACT8865=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_REGULATOR_AD5398=m
CONFIG_REGULATOR_ANATOP=m
CONFIG_REGULATOR_AS3722=m
CONFIG_REGULATOR_AXP20X=m
Linux v4.13-9219-g015a9e66b9b8
2017-09-08 22:21:55 +00:00
CONFIG_REGULATOR_BD9571MWV=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_REGULATOR_DA9052=m
CONFIG_REGULATOR_DA9055=m
CONFIG_REGULATOR_DA9210=m
CONFIG_REGULATOR_DA9211=m
# CONFIG_REGULATOR_DEBUG is not set
Minor updates for ARM
2017-07-13 16:06:15 +00:00
CONFIG_REGULATOR_FAN53555=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=m
CONFIG_REGULATOR_ISL6271A=m
CONFIG_REGULATOR_ISL9305=m
Add RPi3 GPIO expander, RPi fixes, OMAP serial update, general ARM fixes
2018-03-03 22:51:13 +00:00
CONFIG_REGULATOR_LM363X=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_LP3972=m
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP8755=m
CONFIG_REGULATOR_LTC3589=m
# CONFIG_REGULATOR_LTC3676 is not set
CONFIG_REGULATOR_MAX1586=m
CONFIG_REGULATOR_MAX77686=m
CONFIG_REGULATOR_MAX77802=m
CONFIG_REGULATOR_MAX8649=m
CONFIG_REGULATOR_MAX8660=m
CONFIG_REGULATOR_MAX8907=m
CONFIG_REGULATOR_MAX8952=m
CONFIG_REGULATOR_MAX8973=m
CONFIG_REGULATOR_MAX8997=m
CONFIG_REGULATOR_MC13783=m
CONFIG_REGULATOR_MC13892=m
# CONFIG_REGULATOR_MT6311 is not set
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_PBIAS=m
CONFIG_REGULATOR_PFUZE100=m
CONFIG_REGULATOR_PV88060=m
# CONFIG_REGULATOR_PV88080 is not set
CONFIG_REGULATOR_PV88090=m
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_REGULATOR_PWM=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_REGULATOR_QCOM_RPM=m
CONFIG_REGULATOR_QCOM_SMD_RPM=m
CONFIG_REGULATOR_QCOM_SPMI=m
CONFIG_REGULATOR_RK808=m
CONFIG_REGULATOR_S2MPA01=m
CONFIG_REGULATOR_S2MPS11=m
CONFIG_REGULATOR_S5M8767=m
CONFIG_REGULATOR_TI_ABB=m
CONFIG_REGULATOR_TPS51632=m
CONFIG_REGULATOR_TPS62360=m
CONFIG_REGULATOR_TPS65023=m
CONFIG_REGULATOR_TPS6507X=m
CONFIG_REGULATOR_TPS65090=m
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
# CONFIG_REGULATOR_TPS65132 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_REGULATOR_TPS65217=m
CONFIG_REGULATOR_TPS65218=m
CONFIG_REGULATOR_TPS6524X=m
CONFIG_REGULATOR_TPS6586X=m
CONFIG_REGULATOR_TPS65910=m
CONFIG_REGULATOR_TPS65912=m
CONFIG_REGULATOR_TPS80031=m
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
CONFIG_REGULATOR_VCTRL=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_REGULATOR_VEXPRESS=m
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
CONFIG_REGULATOR_WM8994=m
CONFIG_REGULATOR=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_FS=m
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_RELAY=y
Linux v4.9-11744-gb0b3a37
2016-12-19 21:11:15 +00:00
# CONFIG_RELOCATABLE_TEST is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_REMOTEPROC=m
Linux v4.14-9248-ge60e1ee60630
2017-11-16 17:50:37 +00:00
CONFIG_RENESAS_PHY=m
Disable CONFIG_RESET_ATTACK_MITIGATION (rhbz 1532058)
2018-01-08 22:37:57 +00:00
# CONFIG_RESET_ATTACK_MITIGATION is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_GPIO=y
Linux v4.13-11197-gf007cad159e9
2017-09-11 18:05:08 +00:00
# CONFIG_RESET_HSDK_V1 is not set
explicitly enable reset simple on ARM
2017-11-27 15:40:21 +00:00
CONFIG_RESET_SIMPLE=y
Linux v4.12-3441-g1996454
2017-07-05 16:00:04 +00:00
# CONFIG_RESET_TI_SCI is not set
# CONFIG_RESET_TI_SYSCON is not set
Linux v4.14-2229-g894025f24bd0
2017-11-14 18:23:09 +00:00
# CONFIG_RFD77402 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_RFD_FTL is not set
CONFIG_RFKILL_GPIO=m
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL=m
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_RIO is not set
CONFIG_RMI4_CORE=m
Linux v4.9-11744-gb0b3a37
2016-12-19 21:11:15 +00:00
CONFIG_RMI4_F03=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
Linux v4.9-11744-gb0b3a37
2016-12-19 21:11:15 +00:00
CONFIG_RMI4_F34=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_RMI4_F54 is not set
Linux v4.9-11744-gb0b3a37
2016-12-19 21:11:15 +00:00
CONFIG_RMI4_F55=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_RMI4_I2C=m
Linux v4.9-11744-gb0b3a37
2016-12-19 21:11:15 +00:00
CONFIG_RMI4_SMB=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_RMI4_SPI=m
Linux v4.13-6657-g3b9f8ed25dbe
2017-09-07 21:18:25 +00:00
# CONFIG_RMNET is not set
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
CONFIG_ROCKCHIP_ANALOGIX_DP=y
minor ARM cleanup
2017-06-09 17:08:09 +00:00
CONFIG_ROCKCHIP_CDN_DP=y
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
CONFIG_ROCKCHIP_DW_HDMI=y
CONFIG_ROCKCHIP_DW_MIPI_DSI=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_ROCKCHIP_EFUSE=m
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
CONFIG_ROCKCHIP_INNO_HDMI=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_ROCKCHIP_IODOMAIN=m
CONFIG_ROCKCHIP_IOMMU=y
Linux v4.14-9248-ge60e1ee60630
2017-11-16 17:50:37 +00:00
CONFIG_ROCKCHIP_LVDS=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_ROCKCHIP_MBOX=y
Linux v4.13-6657-g3b9f8ed25dbe
2017-09-07 21:18:25 +00:00
CONFIG_ROCKCHIP_PHY=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_ROCKCHIP_PM_DOMAINS=y
CONFIG_ROCKCHIP_SARADC=m
CONFIG_ROCKCHIP_THERMAL=m
CONFIG_ROCKER=m
CONFIG_ROCKETPORT=m
CONFIG_ROMFS_FS=m
CONFIG_ROSE=m
CONFIG_RPCSEC_GSS_KRB5=m
Linux v4.10-9579-gf1ef09f Includes config options from yesterday that were missed
2017-02-24 16:50:29 +00:00
# CONFIG_RPMSG_CHAR is not set
Config improvements for Qualcomm devices
2017-06-26 22:32:58 +00:00
CONFIG_RPMSG=m
Linux v4.12-7934-g9f45efb
2017-07-07 14:59:21 +00:00
CONFIG_RPMSG_QCOM_GLINK_RPM=m
Linux v4.13-11197-gf007cad159e9
2017-09-11 18:05:08 +00:00
# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
Linux v4.11-4395-g89c9fea
2017-05-03 17:50:25 +00:00
CONFIG_RPMSG_QCOM_SMD=m
Linux v4.14-12891-gc8a0739b185d Also turn off a powerpc crypto drive that was failing to compile
2017-11-20 18:00:57 +00:00
CONFIG_RPMSG_VIRTIO=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_RPR0521=m
CONFIG_RSI_91X=m
Linux v4.16-5456-g17dec0a94915
2018-04-04 17:45:22 +00:00
CONFIG_RSI_COEX=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_RSI_DEBUGFS=y
CONFIG_RSI_SDIO=m
CONFIG_RSI_USB=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT2500USB=m
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT3290=y
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
# CONFIG_RT2X00_DEBUG is not set
CONFIG_RT2X00_LIB_DEBUGFS=y
CONFIG_RT2X00=m
CONFIG_RT61PCI=m
CONFIG_RT73USB=m
CONFIG_RTC_CLASS=y
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_DRV_88PM80X=m
# CONFIG_RTC_DRV_AB3100 is not set
# CONFIG_RTC_DRV_ABB5ZES3 is not set
CONFIG_RTC_DRV_ABX80X=m
Minor ARM config updates
2016-12-20 10:11:24 +00:00
CONFIG_RTC_DRV_AC100=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_RTC_DRV_ARMADA38X=m
CONFIG_RTC_DRV_AS3722=y
CONFIG_RTC_DRV_BQ32K=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_CMOS=y
Linux v4.15-10668-g35277995e179
2018-02-05 18:54:33 +00:00
CONFIG_RTC_DRV_CROS_EC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_RTC_DRV_DA9052=m
CONFIG_RTC_DRV_DA9055=m
CONFIG_RTC_DRV_DS1286=m
# CONFIG_RTC_DRV_DS1302 is not set
CONFIG_RTC_DRV_DS1305=m
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1307_HWMON=y
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1374_WDT=y
CONFIG_RTC_DRV_DS1390=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS1685_FAMILY=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
Linux v4.12-11618-gb86faee6d111
2017-07-14 15:44:07 +00:00
# CONFIG_RTC_DRV_DS3232_HWMON is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_RTC_DRV_DS3232=m
# CONFIG_RTC_DRV_EFI is not set
CONFIG_RTC_DRV_EM3027=m
# CONFIG_RTC_DRV_EP93XX is not set
CONFIG_RTC_DRV_FM3130=m
Linux v4.12-11618-gb86faee6d111
2017-07-14 15:44:07 +00:00
# CONFIG_RTC_DRV_FTRTC010 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_RTC_DRV_HYM8563=m
CONFIG_RTC_DRV_IMXDI=m
CONFIG_RTC_DRV_ISL12022=m
Linux v4.16-11490-gb284d4d5a678
2018-04-11 16:12:16 +00:00
CONFIG_RTC_DRV_ISL12026=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_RTC_DRV_ISL12057=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_M41T93=m
CONFIG_RTC_DRV_M41T94=m
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_MAX6916=m
CONFIG_RTC_DRV_MAX77686=m
CONFIG_RTC_DRV_MAX8907=m
CONFIG_RTC_DRV_MAX8997=m
CONFIG_RTC_DRV_MC13XXX=m
# CONFIG_RTC_DRV_MCP795 is not set
# CONFIG_RTC_DRV_MOXART is not set
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_MV=m
CONFIG_RTC_DRV_MXC=m
Linux v4.15-10668-g35277995e179
2018-02-05 18:54:33 +00:00
CONFIG_RTC_DRV_MXC_V2=m
Fix null pointer dereference in bcm2835 MMC driver, Minor updates
2017-03-26 20:16:08 +00:00
CONFIG_RTC_DRV_OMAP=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_RTC_DRV_PALMAS=m
CONFIG_RTC_DRV_PCF2123=m
CONFIG_RTC_DRV_PCF2127=m
CONFIG_RTC_DRV_PCF50633=m
CONFIG_RTC_DRV_PCF85063=m
CONFIG_RTC_DRV_PCF8523=m
Linux v4.15-rc1
2017-11-27 17:15:57 +00:00
# CONFIG_RTC_DRV_PCF85363 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_PL030=y
CONFIG_RTC_DRV_PL031=y
CONFIG_RTC_DRV_PM8XXX=m
Linux v4.9-11744-gb0b3a37
2016-12-19 21:11:15 +00:00
CONFIG_RTC_DRV_R7301=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RK808=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_RV3029C2=m
CONFIG_RTC_DRV_RV3029_HWMON=y
# CONFIG_RTC_DRV_RV8803 is not set
CONFIG_RTC_DRV_RX4581=m
# CONFIG_RTC_DRV_RX6110 is not set
CONFIG_RTC_DRV_RX8010=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_S3C=m
CONFIG_RTC_DRV_S5M=m
# CONFIG_RTC_DRV_SA1100 is not set
CONFIG_RTC_DRV_SNVS=m
CONFIG_RTC_DRV_STK17TA8=m
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_RTC_DRV_ST_LPC=m
enable RTC_DRV_SUN6I
2017-04-26 10:45:55 +00:00
CONFIG_RTC_DRV_SUN6I=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_RTC_DRV_SUNXI=m
CONFIG_RTC_DRV_TEGRA=m
# CONFIG_RTC_DRV_TEST is not set
CONFIG_RTC_DRV_TPS6586X=m
CONFIG_RTC_DRV_TPS65910=m
CONFIG_RTC_DRV_TPS80031=m
minor arm cleanup
2017-07-15 11:47:30 +00:00
CONFIG_RTC_DRV_TWL4030=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_RTC_DRV_TWL92330 is not set
CONFIG_RTC_DRV_V3020=m
CONFIG_RTC_DRV_WM831X=m
CONFIG_RTC_DRV_WM8350=m
CONFIG_RTC_DRV_X1205=m
# CONFIG_RTC_DRV_ZYNQMP is not set
# CONFIG_RTC_DS1685_PROC_REGS is not set
CONFIG_RTC_DS1685_SYSFS_REGS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC is not set
Linux v4.12-11618-gb86faee6d111
2017-07-14 15:44:07 +00:00
# CONFIG_RTC_NVMEM is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8188EE=m
CONFIG_RTL8192CE=m
CONFIG_RTL8192CU=m
CONFIG_RTL8192DE=m
CONFIG_RTL8192EE=m
CONFIG_RTL8192E=m
CONFIG_RTL8192SE=m
# CONFIG_RTL8192U is not set
CONFIG_RTL8723AE=m
CONFIG_RTL8723BE=m
enable RTL8723BS as it's used in numerous x86/ARM cheapo devices, assign bugs to me
2017-05-11 14:07:07 +00:00
CONFIG_RTL8723BS=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_RTL8821AE=m
CONFIG_RTL8XXXU=m
CONFIG_RTL8XXXU_UNTESTED=y
CONFIG_RTL_CARDS=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTLLIB=m
# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTLWIFI=m
# CONFIG_RTS5208 is not set
Linux v4.15-11704-ga2e5790d8416
2018-02-07 15:13:24 +00:00
CONFIG_RUNTIME_TESTING_MENU=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_S2IO=m
CONFIG_S3C2410_WATCHDOG=m
# CONFIG_SAMPLES is not set
# CONFIG_SAMSUNG_PM_CHECK is not set
# CONFIG_SAMSUNG_PM_DEBUG is not set
CONFIG_SAMSUNG_USBPHY=m
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_AHCI_PLATFORM=m
CONFIG_SATA_AHCI=y
# CONFIG_SATA_DWC is not set
CONFIG_SATA_HIGHBANK=m
disable a number of unused PATA/SATA drivers on ARM, don't build x86 specific drivers on other arches, minor tweaks to other arch specific configs
2017-10-01 18:33:34 +00:00
# CONFIG_SATA_INIC162X is not set
Add patches which allow specifying a default SATA linkpower management policy for mobile chipsets and set the default LPM policy to "med_power_with_dipm"
2017-12-22 17:01:57 +00:00
CONFIG_SATA_MOBILE_LPM_POLICY=3
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SATA_MV=m
disable a number of unused PATA/SATA drivers on ARM, don't build x86 specific drivers on other arches, minor tweaks to other arch specific configs
2017-10-01 18:33:34 +00:00
# CONFIG_SATA_NV is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SATA_PMP=y
disable a number of unused PATA/SATA drivers on ARM, don't build x86 specific drivers on other arches, minor tweaks to other arch specific configs
2017-10-01 18:33:34 +00:00
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_QSTOR is not set
Enable SATA_SIL24 on ARM rhbz 1553931
2018-03-10 07:41:48 +00:00
CONFIG_SATA_SIL24=m
disable a number of unused PATA/SATA drivers on ARM, don't build x86 specific drivers on other arches, minor tweaks to other arch specific configs
2017-10-01 18:33:34 +00:00
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SATA_ZPODD is not set
# CONFIG_SBC7240_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
CONFIG_SBP_TARGET=m
# CONFIG_SC1200_WDT is not set
# CONFIG_SC520_WDT is not set
CONFIG_SC92031=m
# CONFIG_SCA3000 is not set
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SCHED_DEBUG=y
Linux v4.9-2682-ge7aa8c2 (missing secure boot as that is being rebased to the new upstream tree
2016-12-13 22:26:04 +00:00
# CONFIG_SCHED_MC_PRIO is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SCHED_MC=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_SCHED_SMT=y
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_SCHEDSTATS=y
CONFIG_SCHED_TRACER=y
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
# CONFIG_SCR24X is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_AM53C974=m
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_CHELSIO_FCOE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DMX3191D=m
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_ESAS2R=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_FLASHPOINT=y
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GDTH=m
# CONFIG_SCSI_HISI_SAS is not set
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_HPTIOP=m
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_ISCI=m
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_MPT2SAS is not set
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT3SAS is not set
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
# CONFIG_SCSI_MQ_DEFAULT is not set
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS=m
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=m
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_SCSI_OSD_DPRINT_SENSE=1
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_PMCRAID=m
# CONFIG_SCSI_PPA is not set
CONFIG_SCSI_PROC_FS=y
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_SMARTPQI=m
# CONFIG_SCSI_SNIC_DEBUG_FS is not set
CONFIG_SCSI_SNIC=m
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP=m
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_UFS_DWC_TC_PCI is not set
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFSHCD_PCI=m
# CONFIG_SCSI_UFSHCD_PLATFORM is not set
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_WD719X=m
CONFIG_SCSI=y
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
Linux v4.15-1549-g6304672b7f0a
2018-01-30 18:26:27 +00:00
CONFIG_SD_ADC_MODULATOR=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SDIO_UART=m
CONFIG_SECCOMP=y
CONFIG_SECONDARY_TRUSTED_KEYRING=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_SECURITY_APPARMOR is not set
Merge 2.6.37-rc1-git10 - Pull in 2.6.37-rc1-git10 snapshot - SECURITY_DMESG_RESTRICT added, the principle of least surprise dictates we should probably have it off. If you want to restrict dmesg access you may use the kernel.dmesg_restrict sysctl. - linux-2.6-bluetooth-autosuspend.patch: merged upstream.
2010-11-14 03:18:22 +00:00
# CONFIG_SECURITY_DMESG_RESTRICT is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SECURITYFS=y
Disable Infiniband/RDMA on ARMv7 as we no longer have userspace tools
2017-08-31 17:35:16 +00:00
# CONFIG_SECURITY_INFINIBAND is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SECURITY_LOADPIN is not set
initial srpm import
2010-07-29 23:46:31 +00:00
CONFIG_SECURITY_NETWORK_XFRM=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SECURITY_NETWORK=y
initial srpm import
2010-07-29 23:46:31 +00:00
# CONFIG_SECURITY_PATH is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SECURITY_SELINUX_AVC_STATS=y
initial srpm import
2010-07-29 23:46:31 +00:00
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
initial srpm import
2010-07-29 23:46:31 +00:00
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_DISABLE=y
big config cleanup lots of stuff moved around to be nearer to similar options. some more pointless stuff disabled.
2012-01-13 20:34:32 +00:00
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SECURITY_SELINUX=y
initial srpm import
2010-07-29 23:46:31 +00:00
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SECURITY=y
Enable YAMA (rhbz 1196825)
2015-03-02 15:14:15 +00:00
CONFIG_SECURITY_YAMA=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SENSORS_AD7314=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADC128D818=m
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_ADM9240=m
Various ARM updates
2017-05-24 11:27:01 +00:00
# CONFIG_SENSORS_ADS1015 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_ADT7310=m
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_APDS990X=m
Linux v4.16-9576-g38c23685b273
2018-04-06 17:00:21 +00:00
CONFIG_SENSORS_ARM_SCMI=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SENSORS_ARM_SCPI=m
CONFIG_SENSORS_ASC7621=m
Linux v4.11-1464-gd3b5d35
2017-05-02 19:04:44 +00:00
CONFIG_SENSORS_ASPEED=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_DA9052_ADC=m
CONFIG_SENSORS_DA9055=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FTSTEUTATES=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_G762=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_GPIO_FAN=m
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_HMC5843_I2C is not set
# CONFIG_SENSORS_HMC5843 is not set
# CONFIG_SENSORS_HMC5843_SPI is not set
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_IBMAEM=m
Linux v4.13-4257-ge7d0c41ecc2e
2017-09-06 18:29:50 +00:00
# CONFIG_SENSORS_IBM_CFFPS is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IIO_HWMON=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
CONFIG_SENSORS_INA3221=m
Linux v4.12-3441-g1996454
2017-07-05 16:00:04 +00:00
# CONFIG_SENSORS_IR35221 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SENSORS_ISL29018=m
CONFIG_SENSORS_ISL29028=m
CONFIG_SENSORS_IT87=m
Linux v4.10-rc6-85-g6d04dfc
2017-02-01 21:17:12 +00:00
CONFIG_SENSORS_JC42=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SENSORS_LINEAGE=m
CONFIG_SENSORS_LIS3_I2C=m
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_SENSORS_LIS3_SPI is not set
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_LTC2945=m
CONFIG_SENSORS_LTC2978=m
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_SENSORS_LTC2990=m
CONFIG_SENSORS_LTC3815=m
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4222=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4260=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX1111=m
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
CONFIG_SENSORS_MAX20751=m
CONFIG_SENSORS_MAX31722=m
Linux v4.14-104-g1e19bded7f5d Also flip MAXSMP for generic vs. debug config (see f4861c48b88ff145cc8b50655b61d6c6a411f073)
2017-11-13 19:38:31 +00:00
# CONFIG_SENSORS_MAX31785 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SENSORS_MAX31790=m
CONFIG_SENSORS_MAX34440=m
Linux v4.14-104-g1e19bded7f5d Also flip MAXSMP for generic vs. debug config (see f4861c48b88ff145cc8b50655b61d6c6a411f073)
2017-11-13 19:38:31 +00:00
# CONFIG_SENSORS_MAX6621 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
CONFIG_SENSORS_MAX8688=m
CONFIG_SENSORS_MC13783_ADC=m
CONFIG_SENSORS_MCP3021=m
CONFIG_SENSORS_NCT6683=m
CONFIG_SENSORS_NCT6775=m
CONFIG_SENSORS_NCT7802=m
CONFIG_SENSORS_NCT7904=m
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_POWR1220=m
CONFIG_SENSORS_PWM_FAN=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SHT3x=m
CONFIG_SENSORS_SHTC1=m
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_SMM665 is not set
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47M1=m
Linux v4.10-1242-g9763dd6
2017-02-21 19:21:44 +00:00
# CONFIG_SENSORS_STTS751 is not set
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_SENSORS_TC654=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SENSORS_TC74=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP103=m
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_SENSORS_TMP108=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_TPS40422=m
Linux v4.13-4257-ge7d0c41ecc2e
2017-09-06 18:29:50 +00:00
CONFIG_SENSORS_TPS53679=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SENSORS_TSL2550=m
# CONFIG_SENSORS_TSL2563 is not set
CONFIG_SENSORS_TWL4030_MADC=m
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_VEXPRESS=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_W83627HF=m
Linux v4.15-1549-g6304672b7f0a
2018-01-30 18:26:27 +00:00
CONFIG_SENSORS_W83773G=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83795=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_WM831X=m
CONFIG_SENSORS_WM8350=m
Linux v4.9-2682-ge7aa8c2 (missing secure boot as that is being rebased to the new upstream tree
2016-12-13 22:26:04 +00:00
# CONFIG_SENSORS_XGENE is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SENSORS_ZL6100=m
Linux v4.12-3441-g1996454
2017-07-05 16:00:04 +00:00
# CONFIG_SERIAL_8250_ASPEED_VUART is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SERIAL_8250_BCM2835AUX=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_CS=m
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_EM is not set
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
CONFIG_SERIAL_8250_EXAR=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_FINTEK is not set
# CONFIG_SERIAL_8250_INGENIC is not set
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_MID is not set
CONFIG_SERIAL_8250_MOXA=m
CONFIG_SERIAL_8250_NR_UARTS=32
Add RPi3 GPIO expander, RPi fixes, OMAP serial update, general ARM fixes
2018-03-03 22:51:13 +00:00
CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP=y
CONFIG_SERIAL_8250_OMAP=y
Linux v4.12-rc7
2017-06-26 14:09:55 +00:00
CONFIG_SERIAL_8250_PCI=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_8250_RUNTIME_UARTS=32
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
CONFIG_SERIAL_AMBA_PL010=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CORE=y
Rebase to new HummingBoard 2 DT patch, Minor ARM cleanups. Enable Serial device TTY port controller As the TTY core is built-in only, this has the side effect of making serdev built-in as well. This is needed for devices such as Bluetooth, WiFi, GPS and NFC connected to UARTs on host processors.
2017-04-06 14:51:42 +00:00
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST=y
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_IFX6X60 is not set
CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_KGDB_NMI is not set
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
Enable Amlogic (meson) SoCs for ARMv7/aarch64
2016-12-27 04:15:07 +00:00
CONFIG_SERIAL_MESON_CONSOLE=y
CONFIG_SERIAL_MESON=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SERIAL_MPS2_UART is not set
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MVEBU_CONSOLE=y
CONFIG_SERIAL_MVEBU_UART=y
- Enable Tiny DRM on ARM platforms - ARM config updates - General config cleanups - Add patch to fix desktop lockups on RPi (vc4) RHBZ# 1389163
2017-03-01 12:12:17 +00:00
# CONFIG_SERIAL_NONSTANDARD is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SERIAL_OF_PLATFORM=y
Add RPi3 GPIO expander, RPi fixes, OMAP serial update, general ARM fixes
2018-03-03 22:51:13 +00:00
# CONFIG_SERIAL_OMAP is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SERIAL_PCH_UART is not set
CONFIG_SERIAL_PXA_CONSOLE=y
CONFIG_SERIAL_PXA=y
# CONFIG_SERIAL_RP2 is not set
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
CONFIG_SERIAL_SAMSUNG=y
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_SCCNXP is not set
Enable STi Serial Console
2017-03-16 16:55:56 +00:00
CONFIG_SERIAL_ST_ASC_CONSOLE=y
CONFIG_SERIAL_ST_ASC=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SERIAL_TEGRA=y
# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_SERIAL_UARTLITE_CONSOLE=y
Linux v4.11-11413-g2868b25
2017-05-09 15:45:07 +00:00
CONFIG_SERIAL_UARTLITE_NR_UARTS=1
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIO_ALTERA_PS2=m
CONFIG_SERIO_AMBAKMI=m
# CONFIG_SERIO_APBPS2 is not set
CONFIG_SERIO_ARC_PS2=m
# CONFIG_SERIO_CT82C710 is not set
Enable Physlink/SFP functionality, minor cleanups, Tegra DRM FTB fix
2017-09-12 17:26:40 +00:00
# CONFIG_SERIO_GPIO_PS2 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SERIO_I8042=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_SERIO_LIBPS2=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SERIO_NVEC_PS2=y
CONFIG_SERIO_OLPC_APSP=m
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_RAW=m
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_SUN4I_PS2=m
CONFIG_SERIO=y
Linux v4.9-2682-ge7aa8c2 (missing secure boot as that is being rebased to the new upstream tree
2016-12-13 22:26:04 +00:00
CONFIG_SFC_FALCON=m
CONFIG_SFC_FALCON_MTD=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SFC is not set
Enable Physlink/SFP functionality, minor cleanups, Tegra DRM FTB fix
2017-09-12 17:26:40 +00:00
CONFIG_SFP=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SGI_IOC4 is not set
CONFIG_SGI_PARTITION=y
CONFIG_SH_ETH=m
# CONFIG_SI1145 is not set
CONFIG_SI7005=m
CONFIG_SI7020=m
# CONFIG_SIGMA is not set
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
enable Simple PM Bus on ARM
2017-12-04 08:25:25 +00:00
CONFIG_SIMPLE_PM_BUS=y
Linux v4.15-9939-g4bf772b14675
2018-02-02 20:38:32 +00:00
# CONFIG_SIOX is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SIS190=m
CONFIG_SIS900=m
# CONFIG_SKFP is not set
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKGE_GENESIS=y
CONFIG_SKGE=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_SKY2=m
Linux v4.13-6657-g3b9f8ed25dbe
2017-09-07 21:18:25 +00:00
CONFIG_SLAB_FREELIST_HARDENED=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SLAB_FREELIST_RANDOM=y
Linux v4.12-7934-g9f45efb
2017-07-07 14:59:21 +00:00
CONFIG_SLAB_MERGE_DEFAULT=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SLICOSS is not set
Linux v4.15-9939-g4bf772b14675
2018-02-02 20:38:32 +00:00
CONFIG_SLIMBUS=m
CONFIG_SLIM_QCOM_CTRL=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP=m
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_SLIP_SMART=y
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_SLUB=y
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_SMC911X=m
CONFIG_SMC91X=m
Enable a few infiniband options (rhbz 1291902)
2018-04-09 19:38:43 +00:00
CONFIG_SMC_DIAG=m
CONFIG_SMC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SM_FTL is not set
CONFIG_SMP_ON_UP=y
CONFIG_SMP=y
CONFIG_SMSC911X=m
CONFIG_SMSC9420=m
CONFIG_SMSC_PHY=m
CONFIG_SMSC_SCH311X_WDT=m
CONFIG_SMS_SDIO_DRV=m
# CONFIG_SMS_SIANO_DEBUGFS is not set
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
CONFIG_SMS_USB_DRV=m
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AD1889=m
# CONFIG_SND_ALI5451 is not set
CONFIG_SND_ALOOP=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_AM33XX_SOC_EVM=m
CONFIG_SND_ARMAACI=m
CONFIG_SND_ARM=y
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
# CONFIG_SND_ATMEL_SOC is not set
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
Minor updates for ARM
2017-07-13 16:06:15 +00:00
CONFIG_SND_AUDIO_GRAPH_CARD=m
Linux v4.12-7934-g9f45efb
2017-07-07 14:59:21 +00:00
# CONFIG_SND_AUDIO_GRAPH_SCU_CARD is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SND_AW2 is not set
CONFIG_SND_AZT3328=m
Enable driver for the Behringer BCD 2000 (rhbz 1514945)
2017-11-20 18:11:18 +00:00
CONFIG_SND_BCD2000=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_BCM2835_SOC_I2S=m
CONFIG_SND_BEBOB=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_COMPRESS_OFFLOAD=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5530=m
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_CTXFI=m
initial srpm import
2010-07-29 23:46:31 +00:00
CONFIG_SND_DARLA20=m
CONFIG_SND_DARLA24=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_DAVINCI_SOC_GENERIC_EVM=m
CONFIG_SND_DAVINCI_SOC_I2S=m
CONFIG_SND_DAVINCI_SOC=m
CONFIG_SND_DAVINCI_SOC_MCASP=m
CONFIG_SND_DAVINCI_SOC_VCIF=m
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_DEBUG_VERBOSE is not set
CONFIG_SND_DESIGNWARE_I2S=m
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
CONFIG_SND_DESIGNWARE_PCM=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_DICE=m
CONFIG_SND_DMAENGINE_PCM=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_DYNAMIC_MINORS=y
initial srpm import
2010-07-29 23:46:31 +00:00
CONFIG_SND_ECHO3G=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_EDMA_SOC=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_RADIO=y
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
CONFIG_SND_FIREFACE=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_FIREWIRE_DIGI00X=m
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
CONFIG_SND_FIREWIRE_MOTU=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_FIREWIRE_TASCAM=m
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWORKS=m
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_GINA20=m
CONFIG_SND_GINA24=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_CA0110=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_GENERIC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=0
CONFIG_SND_HDA_INPUT_BEEP=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_SND_HDA_INTEL=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_HDA_PATCH_LOADER=y
Set CONFIG_SND_HDA_POWER_SAVE_DEFAULT=1 on x86_64 only (rhbz 1525561)
2017-12-15 14:39:04 +00:00
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_PREALLOC_SIZE=4096
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_TEGRA=m
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_SND_HRTIMER=m
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
CONFIG_SND_I2S_HI6210_I2S=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_IMX_SOC=m
initial srpm import
2010-07-29 23:46:31 +00:00
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGODJX=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGO=m
minor cleanup, drop some old options
2017-07-18 17:40:06 +00:00
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_ISIGHT=m
CONFIG_SND_JACK=y
CONFIG_SND_KIRKWOOD_SOC_ARMADA370_DB=m
CONFIG_SND_KIRKWOOD_SOC=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_SND=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_MIA=m
CONFIG_SND_MIXART=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_SND_MIXER_OSS=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_MMP_SOC=y
CONFIG_SND_MONA=m
CONFIG_SND_MPU401=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_NM256=m
CONFIG_SND_OMAP_SOC_AM3517EVM=m
CONFIG_SND_OMAP_SOC_DMIC=m
CONFIG_SND_OMAP_SOC_HDMI_AUDIO=m
CONFIG_SND_OMAP_SOC=m
CONFIG_SND_OMAP_SOC_MCBSP=m
CONFIG_SND_OMAP_SOC_MCPDM=m
CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
CONFIG_SND_OMAP_SOC_RX51=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_OXFW=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_PCI=y
# CONFIG_SND_PCMCIA is not set
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_SND_PCM_OSS=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCSP=m
CONFIG_SND_PCXHR=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_PXA910_SOC=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME9652=m
CONFIG_SND_RME96=m
CONFIG_SND_SAMSUNG_PCM=m
CONFIG_SND_SAMSUNG_SPDIF=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_SND_SEQUENCER=m
Linux v4.12-7934-g9f45efb
2017-07-07 14:59:21 +00:00
CONFIG_SND_SEQUENCER_OSS=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_SERIAL_U16550=m
Enable SND_SOC and the button array driver on x86 for Baytrail devices https://lists.fedoraproject.org/pipermail/kernel/2015-January/005719.html Move the common SND_SOC options from the ARM configs to config-generic and enable the Intel ones in config-x86-generic
2015-01-27 19:52:25 +00:00
CONFIG_SND_SIMPLE_CARD=m
Minor updates for ARM
2017-07-13 16:06:15 +00:00
CONFIG_SND_SIMPLE_CARD_UTILS=m
Minor ARM config cleanups
2017-04-25 12:01:29 +00:00
CONFIG_SND_SIMPLE_SCU_CARD=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_SIS7019=m
CONFIG_SND_SOC_AC97_BUS=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_SND_SOC_AC97_CODEC=m
Enable SND_SOC and the button array driver on x86 for Baytrail devices https://lists.fedoraproject.org/pipermail/kernel/2015-January/005719.html Move the common SND_SOC options from the ARM configs to config-generic and enable the Intel ones in config-x86-generic
2015-01-27 19:52:25 +00:00
# CONFIG_SND_SOC_ADAU1701 is not set
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
CONFIG_SND_SOC_ADAU1761_I2C=m
CONFIG_SND_SOC_ADAU1761_SPI=m
Linux v4.16-9576-g38c23685b273
2018-04-06 17:00:21 +00:00
CONFIG_SND_SOC_ADAU7002=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_SOC_ADI_AXI_I2S=m
CONFIG_SND_SOC_ADI_AXI_SPDIF=m
CONFIG_SND_SOC_ADI=m
Enable SND_SOC and the button array driver on x86 for Baytrail devices https://lists.fedoraproject.org/pipermail/kernel/2015-January/005719.html Move the common SND_SOC options from the ARM configs to config-generic and enable the Intel ones in config-x86-generic
2015-01-27 19:52:25 +00:00
# CONFIG_SND_SOC_AK4104 is not set
Linux v4.16-9576-g38c23685b273
2018-04-06 17:00:21 +00:00
CONFIG_SND_SOC_AK4458=m
Enable SND_SOC and the button array driver on x86 for Baytrail devices https://lists.fedoraproject.org/pipermail/kernel/2015-January/005719.html Move the common SND_SOC options from the ARM configs to config-generic and enable the Intel ones in config-x86-generic
2015-01-27 19:52:25 +00:00
# CONFIG_SND_SOC_AK4554 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SND_SOC_AK4613 is not set
Enable SND_SOC and the button array driver on x86 for Baytrail devices https://lists.fedoraproject.org/pipermail/kernel/2015-January/005719.html Move the common SND_SOC options from the ARM configs to config-generic and enable the Intel ones in config-x86-generic
2015-01-27 19:52:25 +00:00
# CONFIG_SND_SOC_AK4642 is not set
# CONFIG_SND_SOC_AK5386 is not set
Linux v4.16-9576-g38c23685b273
2018-04-06 17:00:21 +00:00
CONFIG_SND_SOC_AK5558=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SND_SOC_ALC5623 is not set
CONFIG_SND_SOC_ALL_CODECS=m
CONFIG_SND_SOC_AMD_ACP=m
Linux v4.16-9576-g38c23685b273
2018-04-06 17:00:21 +00:00
CONFIG_SND_SOC_AMD_CZ_DA7219MX98357_MACH=m
Linux v4.14-4050-g37cb8e1f8e10
2017-11-15 17:40:48 +00:00
CONFIG_SND_SOC_AMD_CZ_RT5645_MACH=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SND_SOC_APQ8016_SBC is not set
CONFIG_SND_SOC_ARNDALE_RT5631_ALC5631=m
Linux v4.16-9576-g38c23685b273
2018-04-06 17:00:21 +00:00
CONFIG_SND_SOC_BD28623=m
Linux v4.7-10753-g731c7d3
2016-08-02 09:43:58 +00:00
# CONFIG_SND_SOC_BT_SCO is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SND_SOC_CS35L32 is not set
Linux v4.7-10753-g731c7d3
2016-08-02 09:43:58 +00:00
# CONFIG_SND_SOC_CS35L33 is not set
Linux v4.9-8648-g5cc60ae
2016-12-15 19:27:26 +00:00
CONFIG_SND_SOC_CS35L34=m
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
CONFIG_SND_SOC_CS35L35=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SND_SOC_CS4265 is not set
Enable SND_SOC and the button array driver on x86 for Baytrail devices https://lists.fedoraproject.org/pipermail/kernel/2015-January/005719.html Move the common SND_SOC options from the ARM configs to config-generic and enable the Intel ones in config-x86-generic
2015-01-27 19:52:25 +00:00
# CONFIG_SND_SOC_CS4270 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SND_SOC_CS4271_I2C is not set
Enable SND_SOC and the button array driver on x86 for Baytrail devices https://lists.fedoraproject.org/pipermail/kernel/2015-January/005719.html Move the common SND_SOC options from the ARM configs to config-generic and enable the Intel ones in config-x86-generic
2015-01-27 19:52:25 +00:00
# CONFIG_SND_SOC_CS4271 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SND_SOC_CS4271_SPI is not set
Linux v4.9-8648-g5cc60ae
2016-12-15 19:27:26 +00:00
CONFIG_SND_SOC_CS42L42=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SND_SOC_CS42L51_I2C is not set
# CONFIG_SND_SOC_CS42L52 is not set
# CONFIG_SND_SOC_CS42L56 is not set
# CONFIG_SND_SOC_CS42L73 is not set
CONFIG_SND_SOC_CS42XX8_I2C=m
Linux v4.13-9219-g015a9e66b9b8
2017-09-08 22:21:55 +00:00
CONFIG_SND_SOC_CS43130=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SND_SOC_CS4349 is not set
Linux v4.7-10753-g731c7d3
2016-08-02 09:43:58 +00:00
# CONFIG_SND_SOC_CS53L30 is not set
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
CONFIG_SND_SOC_DIO2125=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_SOC_DMIC=m
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
CONFIG_SND_SOC_ES7134=m
Linux v4.12-7934-g9f45efb
2017-07-07 14:59:21 +00:00
# CONFIG_SND_SOC_ES8316 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_SOC_ES8328_I2C=m
CONFIG_SND_SOC_ES8328=m
CONFIG_SND_SOC_ES8328_SPI=m
CONFIG_SND_SOC_EUKREA_TLV320=m
CONFIG_SND_SOC_FSL_ASOC_CARD=m
CONFIG_SND_SOC_FSL_ASRC=m
CONFIG_SND_SOC_FSL_ESAI=m
CONFIG_SND_SOC_FSL_SAI=m
CONFIG_SND_SOC_FSL_SPDIF=m
CONFIG_SND_SOC_FSL_SSI=m
CONFIG_SND_SOC_FSL_UTILS=m
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
# CONFIG_SND_SOC_GTM601 is not set
- Enable Tiny DRM on ARM platforms - ARM config updates - General config cleanups - Add patch to fix desktop lockups on RPi (vc4) RHBZ# 1389163
2017-03-01 12:12:17 +00:00
CONFIG_SND_SOC_HDAC_HDMI=m
Linux v4.10-rc1 (didn't adjust debug options), ARM config updates, minor general config cleanups
2016-12-27 02:51:37 +00:00
CONFIG_SND_SOC_HDMI_CODEC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_SOC_I2C_AND_SPI=m
# CONFIG_SND_SOC_IMG is not set
CONFIG_SND_SOC_IMX_AUDMUX=m
CONFIG_SND_SOC_IMX_ES8328=m
CONFIG_SND_SOC_IMX_MC13783=m
CONFIG_SND_SOC_IMX_PCM_DMA=m
CONFIG_SND_SOC_IMX_PCM_FIQ=m
CONFIG_SND_SOC_IMX_SGTL5000=m
CONFIG_SND_SOC_IMX_SPDIF=m
CONFIG_SND_SOC_IMX_SSI=m
CONFIG_SND_SOC_IMX_WM8962=m
# CONFIG_SND_SOC_INNO_RK3036 is not set
CONFIG_SND_SOC_LPASS_CPU=m
CONFIG_SND_SOC_LPASS_PLATFORM=m
CONFIG_SND_SOC=m
Linux v4.16-9576-g38c23685b273
2018-04-06 17:00:21 +00:00
CONFIG_SND_SOC_MAX9759=m
Various ARM updates
2017-05-24 11:27:01 +00:00
CONFIG_SND_SOC_MAX98090=m
Linux v4.15-1549-g6304672b7f0a
2018-01-30 18:26:27 +00:00
CONFIG_SND_SOC_MAX98373=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SND_SOC_MAX98504 is not set
# CONFIG_SND_SOC_MAX9860 is not set
Linux v4.16-9576-g38c23685b273
2018-04-06 17:00:21 +00:00
CONFIG_SND_SOC_MAX9867=m
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
CONFIG_SND_SOC_MAX98927=m
Linux v4.9-10415-g73e2e0c
2016-12-16 15:42:31 +00:00
# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set
Config improvements for Qualcomm devices
2017-06-26 22:32:58 +00:00
CONFIG_SND_SOC_MSM8916_WCD_ANALOg=m
CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
Linux v4.10-9579-gf1ef09f Includes config options from yesterday that were missed
2017-02-24 16:50:29 +00:00
# CONFIG_SND_SOC_NAU8540 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SND_SOC_NAU8810 is not set
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
CONFIG_SND_SOC_NAU8824=m
CONFIG_SND_SOC_ODROID=m
Enable SND_SOC and the button array driver on x86 for Baytrail devices https://lists.fedoraproject.org/pipermail/kernel/2015-January/005719.html Move the common SND_SOC options from the ARM configs to config-generic and enable the Intel ones in config-x86-generic
2015-01-27 19:52:25 +00:00
# CONFIG_SND_SOC_PCM1681 is not set
Linux v4.16-9576-g38c23685b273
2018-04-06 17:00:21 +00:00
CONFIG_SND_SOC_PCM1789_I2C=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SND_SOC_PCM179X_I2C is not set
Linux v4.4-8606-g5807fca
2016-01-18 21:41:06 +00:00
# CONFIG_SND_SOC_PCM179X is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SND_SOC_PCM179X_SPI is not set
Linux v4.15-1549-g6304672b7f0a
2018-01-30 18:26:27 +00:00
CONFIG_SND_SOC_PCM186X_I2C=m
CONFIG_SND_SOC_PCM186X_SPI=m
Linux v4.4-8606-g5807fca
2016-01-18 21:41:06 +00:00
# CONFIG_SND_SOC_PCM3168A_I2C is not set
# CONFIG_SND_SOC_PCM3168A_SPI is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_SOC_PCM512x_I2C=m
CONFIG_SND_SOC_PCM512x=m
CONFIG_SND_SOC_PCM512x_SPI=m
CONFIG_SND_SOC_QCOM=m
- Enable Tiny DRM on ARM platforms - ARM config updates - General config cleanups - Add patch to fix desktop lockups on RPi (vc4) RHBZ# 1389163
2017-03-01 12:12:17 +00:00
CONFIG_SND_SOC_RK3288_HDMI_ANALOG=m
CONFIG_SND_SOC_RK3399_GRU_SOUND=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_SOC_ROCKCHIP_I2S=m
CONFIG_SND_SOC_ROCKCHIP=m
CONFIG_SND_SOC_ROCKCHIP_MAX98090=m
Minor updates for ARM
2017-07-13 16:06:15 +00:00
CONFIG_SND_SOC_ROCKCHIP_PDM=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_SOC_ROCKCHIP_RT5645=m
CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
# CONFIG_SND_SOC_RT5616 is not set
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_SND_SOC_RT5631=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_SOC_SAMSUNG=m
CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF=m
CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=m
CONFIG_SND_SOC_SGTL5000=m
Enable SND_SOC and the button array driver on x86 for Baytrail devices https://lists.fedoraproject.org/pipermail/kernel/2015-January/005719.html Move the common SND_SOC options from the ARM configs to config-generic and enable the Intel ones in config-x86-generic
2015-01-27 19:52:25 +00:00
# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_SOC_SMDK_WM8994_PCM=m
CONFIG_SND_SOC_SNOW=m
CONFIG_SND_SOC_SPDIF=m
# CONFIG_SND_SOC_SSM2602_I2C is not set
# CONFIG_SND_SOC_SSM2602_SPI is not set
# CONFIG_SND_SOC_SSM4567 is not set
# CONFIG_SND_SOC_STA32X is not set
# CONFIG_SND_SOC_STA350 is not set
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_SND_SOC_STI=m
CONFIG_SND_SOC_STI_SAS=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_SOC_STORM=m
# CONFIG_SND_SOC_TAS2552 is not set
Enable SND_SOC and the button array driver on x86 for Baytrail devices https://lists.fedoraproject.org/pipermail/kernel/2015-January/005719.html Move the common SND_SOC options from the ARM configs to config-generic and enable the Intel ones in config-x86-generic
2015-01-27 19:52:25 +00:00
# CONFIG_SND_SOC_TAS5086 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SND_SOC_TAS571X is not set
# CONFIG_SND_SOC_TAS5720 is not set
Linux v4.15-1549-g6304672b7f0a
2018-01-30 18:26:27 +00:00
CONFIG_SND_SOC_TAS6424=m
Linux v4.16-9576-g38c23685b273
2018-04-06 17:00:21 +00:00
CONFIG_SND_SOC_TDA7419=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_SOC_TEGRA20_AC97=m
CONFIG_SND_SOC_TEGRA20_DAS=m
Linux v4.13-4257-ge7d0c41ecc2e
2017-09-06 18:29:50 +00:00
CONFIG_SND_SOC_TEGRA20_I2S=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_SOC_TEGRA20_SPDIF=m
CONFIG_SND_SOC_TEGRA30_AHUB=m
CONFIG_SND_SOC_TEGRA30_I2S=m
CONFIG_SND_SOC_TEGRA_ALC5632=m
CONFIG_SND_SOC_TEGRA=m
CONFIG_SND_SOC_TEGRA_MAX98090=m
CONFIG_SND_SOC_TEGRA_RT5640=m
CONFIG_SND_SOC_TEGRA_RT5677=m
- Enable Tiny DRM on ARM platforms - ARM config updates - General config cleanups - Add patch to fix desktop lockups on RPi (vc4) RHBZ# 1389163
2017-03-01 12:12:17 +00:00
CONFIG_SND_SOC_TEGRA_SGTL5000=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_SOC_TEGRA_TRIMSLICE=m
arm: disable dead driver
2017-04-24 08:12:55 +00:00
# CONFIG_SND_SOC_TEGRA_WM8753 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_SOC_TEGRA_WM8903=m
CONFIG_SND_SOC_TEGRA_WM9712=m
# CONFIG_SND_SOC_TFA9879 is not set
CONFIG_SND_SOC_TLV320AIC23_I2C=m
CONFIG_SND_SOC_TLV320AIC23=m
CONFIG_SND_SOC_TLV320AIC23_SPI=m
CONFIG_SND_SOC_TLV320AIC31XX=m
Linux v4.15-1549-g6304672b7f0a
2018-01-30 18:26:27 +00:00
CONFIG_SND_SOC_TLV320AIC32X4_I2C=m
CONFIG_SND_SOC_TLV320AIC32X4_SPI=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_SOC_TLV320AIC3X=m
CONFIG_SND_SOC_TPA6130A2=m
CONFIG_SND_SOC_TS3A227E=m
Linux v4.15-1549-g6304672b7f0a
2018-01-30 18:26:27 +00:00
CONFIG_SND_SOC_TSCS42XX=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_SOC_TWL4030=m
CONFIG_SND_SOC_TWL6040=m
Enable SND_SOC and the button array driver on x86 for Baytrail devices https://lists.fedoraproject.org/pipermail/kernel/2015-January/005719.html Move the common SND_SOC options from the ARM configs to config-generic and enable the Intel ones in config-x86-generic
2015-01-27 19:52:25 +00:00
# CONFIG_SND_SOC_WM8510 is not set
# CONFIG_SND_SOC_WM8523 is not set
Linux v4.13-9219-g015a9e66b9b8
2017-09-08 22:21:55 +00:00
CONFIG_SND_SOC_WM8524=m
Enable SND_SOC and the button array driver on x86 for Baytrail devices https://lists.fedoraproject.org/pipermail/kernel/2015-January/005719.html Move the common SND_SOC options from the ARM configs to config-generic and enable the Intel ones in config-x86-generic
2015-01-27 19:52:25 +00:00
# CONFIG_SND_SOC_WM8580 is not set
# CONFIG_SND_SOC_WM8711 is not set
# CONFIG_SND_SOC_WM8728 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_SOC_WM8731=m
Enable SND_SOC and the button array driver on x86 for Baytrail devices https://lists.fedoraproject.org/pipermail/kernel/2015-January/005719.html Move the common SND_SOC options from the ARM configs to config-generic and enable the Intel ones in config-x86-generic
2015-01-27 19:52:25 +00:00
# CONFIG_SND_SOC_WM8737 is not set
# CONFIG_SND_SOC_WM8741 is not set
# CONFIG_SND_SOC_WM8750 is not set
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_SND_SOC_WM8753=m
Enable SND_SOC and the button array driver on x86 for Baytrail devices https://lists.fedoraproject.org/pipermail/kernel/2015-January/005719.html Move the common SND_SOC options from the ARM configs to config-generic and enable the Intel ones in config-x86-generic
2015-01-27 19:52:25 +00:00
# CONFIG_SND_SOC_WM8770 is not set
# CONFIG_SND_SOC_WM8776 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_SOC_WM8804_I2C=m
CONFIG_SND_SOC_WM8804=m
CONFIG_SND_SOC_WM8804_SPI=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_SND_SOC_WM8903=m
Linux v4.10-rc1 (didn't adjust debug options), ARM config updates, minor general config cleanups
2016-12-27 02:51:37 +00:00
CONFIG_SND_SOC_WM8960=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_SOC_WM8962=m
Linux v4.4-8606-g5807fca
2016-01-18 21:41:06 +00:00
# CONFIG_SND_SOC_WM8974 is not set
Enable SND_SOC and the button array driver on x86 for Baytrail devices https://lists.fedoraproject.org/pipermail/kernel/2015-January/005719.html Move the common SND_SOC options from the ARM configs to config-generic and enable the Intel ones in config-x86-generic
2015-01-27 19:52:25 +00:00
# CONFIG_SND_SOC_WM8978 is not set
Linux v4.7-10753-g731c7d3
2016-08-02 09:43:58 +00:00
# CONFIG_SND_SOC_WM8985 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SND_SOC_XTFPGA_I2S is not set
Linux v4.12-7934-g9f45efb
2017-07-07 14:59:21 +00:00
# CONFIG_SND_SOC_ZX_AUD96P22 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_SONICVIBES=m
# CONFIG_SND_SPI is not set
CONFIG_SND_SUN4I_CODEC=m
CONFIG_SND_SUN4I_I2S=m
CONFIG_SND_SUN4I_SPDIF=m
Linux v4.9-8648-g5cc60ae
2016-12-15 19:27:26 +00:00
CONFIG_SND_SUN8I_CODEC_ANALOG=m
- Enable Tiny DRM on ARM platforms - ARM config updates - General config cleanups - Add patch to fix desktop lockups on RPi (vc4) RHBZ# 1389163
2017-03-01 12:12:17 +00:00
CONFIG_SND_SUN8I_CODEC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_TRIDENT=m
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_HIFACE=m
CONFIG_SND_USB_PODHD=m
CONFIG_SND_USB_POD=m
CONFIG_SND_USB_TONEPORT=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_VARIAX=m
CONFIG_SND_USB=y
# CONFIG_SND_VERBOSE_PRINTK is not set
CONFIG_SND_VERBOSE_PROCFS=y
minor cleanup, drop some old options
2017-07-18 17:40:06 +00:00
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SND_VIRMIDI=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SOC_AM33XX=y
CONFIG_SOC_AM43XX=y
# CONFIG_SOC_BRCMSTB is not set
# CONFIG_SOC_CAMERA is not set
# CONFIG_SOC_DRA7XX is not set
CONFIG_SOC_EXYNOS3250=y
CONFIG_SOC_EXYNOS4212=y
CONFIG_SOC_EXYNOS4412=y
CONFIG_SOC_EXYNOS4415=y
CONFIG_SOC_EXYNOS5250=y
CONFIG_SOC_EXYNOS5260=y
CONFIG_SOC_EXYNOS5410=y
CONFIG_SOC_EXYNOS5420=y
CONFIG_SOC_EXYNOS5440=y
CONFIG_SOC_EXYNOS5800=y
CONFIG_SOC_HAS_REALTIME_COUNTER=y
CONFIG_SOC_IMX50=y
CONFIG_SOC_IMX51=y
CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
Linux v4.16-9576-g38c23685b273
2018-04-06 17:00:21 +00:00
# CONFIG_SOC_IMX6SLL is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SOC_IMX6SL=y
CONFIG_SOC_IMX6SX=y
CONFIG_SOC_IMX6UL=y
CONFIG_SOC_IMX6=y
CONFIG_SOC_IMX7D=y
# CONFIG_SOC_LS1021A is not set
CONFIG_SOC_OMAP3430=y
CONFIG_SOC_OMAP5=y
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_SOC_STIH407=y
# CONFIG_SOC_STIH415 is not set
# CONFIG_SOC_STIH416 is not set
minor merge window cleanups
2017-05-10 17:20:47 +00:00
CONFIG_SOC_TEGRA_FLOWCTRL=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SOC_TI81XX=y
# CONFIG_SOC_TI is not set
# CONFIG_SOC_VF610 is not set
Linux v4.10-9579-gf1ef09f Includes config options from yesterday that were missed
2017-02-24 16:50:29 +00:00
# CONFIG_SOC_ZTE is not set
Linux v4.12-11618-gb86faee6d111
2017-07-14 15:44:07 +00:00
CONFIG_SOFTLOCKUP_DETECTOR=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SOFT_WATCHDOG=m
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_SOLO6X10 is not set
CONFIG_SONY_FF=y
# CONFIG_SONYPI is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
Linux v4.15-9939-g4bf772b14675
2018-02-02 20:38:32 +00:00
CONFIG_SOUNDWIRE_BUS=m
CONFIG_SOUNDWIRE_CADENCE=m
CONFIG_SOUNDWIRE=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SPARSE_RCU_POINTER=y
# CONFIG_SPEAKUP is not set
# CONFIG_SPI_ALTERA is not set
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_SPI_ARMADA_3700=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SPI_AXI_SPI_ENGINE is not set
CONFIG_SPI_BCM2835AUX=m
CONFIG_SPI_BCM2835=m
# CONFIG_SPI_BCM_QSPI is not set
CONFIG_SPI_BITBANG=m
# CONFIG_SPI_BUTTERFLY is not set
CONFIG_SPI_CADENCE=m
# CONFIG_SPI_CADENCE_QUADSPI is not set
CONFIG_SPI_DAVINCI=m
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_DESIGNWARE=m
# CONFIG_SPI_DW_MID_DMA is not set
CONFIG_SPI_DW_MMIO=m
CONFIG_SPI_DW_PCI=m
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_SPI_FSL_LPSPI=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SPI_FSL_QUADSPI=m
# CONFIG_SPI_FSL_SPI is not set
CONFIG_SPI_GPIO=m
CONFIG_SPI_IMX=m
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
CONFIG_SPI_MASTER=y
Linux v4.12-3441-g1996454
2017-07-05 16:00:04 +00:00
# CONFIG_SPI_MESON_SPICC is not set
Enable Amlogic (meson) SoCs for ARMv7/aarch64
2016-12-27 04:15:07 +00:00
CONFIG_SPI_MESON_SPIFC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SPI_MXS=m
# CONFIG_SPI_OC_TINY is not set
CONFIG_SPI_OMAP24XX=m
CONFIG_SPI_ORION=m
CONFIG_SPI_PL022=m
# CONFIG_SPI_PXA2XX is not set
CONFIG_SPI_QUP=m
CONFIG_SPI_ROCKCHIP=m
CONFIG_SPI_S3C64XX=m
# CONFIG_SPI_SC18IS602 is not set
Linux v4.12-3441-g1996454
2017-07-05 16:00:04 +00:00
# CONFIG_SPI_SLAVE is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SPI_SPIDEV=m
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_SPI_ST_SSC4=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SPI_SUN4I=m
CONFIG_SPI_SUN6I=m
CONFIG_SPI_TEGRA114=m
CONFIG_SPI_TEGRA20_SFLASH=m
CONFIG_SPI_TEGRA20_SLINK=m
CONFIG_SPI_TI_QSPI=m
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_TOPCLIFF_PCH is not set
# CONFIG_SPI_XCOMM is not set
CONFIG_SPI_XILINX=m
CONFIG_SPI=y
# CONFIG_SPI_ZYNQMP_GQSPI is not set
CONFIG_SPMI=m
CONFIG_SPMI_MSM_PMIC_ARB=m
Linux v4.15-9939-g4bf772b14675
2018-02-02 20:38:32 +00:00
CONFIG_SPMI_PMIC_CLKDIV=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_ZLIB=y
Linux v4.14-rc1
2017-09-18 19:14:22 +00:00
CONFIG_SQUASHFS_ZSTD=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SRAM=y
Linux v4.11-10603-g13e0988
2017-05-08 17:38:14 +00:00
# CONFIG_SRF04 is not set
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
# CONFIG_SRF08 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_HOST_SOC=y
CONFIG_SSB=m
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_SILENT is not set
# CONFIG_SSFDC is not set
CONFIG_STACK_TRACER=y
CONFIG_STACK_VALIDATION=y
# CONFIG_STAGING_BOARD is not set
CONFIG_STAGING_MEDIA=y
CONFIG_STAGING=y
CONFIG_STANDALONE=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
# CONFIG_STATIC_USERMODEHELPER is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_STE10XP=m
# CONFIG_STE_MODEM_RPROC is not set
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_ST_FDMA=m
CONFIG_STI_MBOX=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_STK3310=m
# CONFIG_STK8312 is not set
# CONFIG_STK8BA50 is not set
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_ST_LPC_WATCHDOG=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_STM_DUMMY is not set
# CONFIG_STM is not set
CONFIG_STMMAC_ETH=m
# CONFIG_STMMAC_PCI is not set
CONFIG_STMMAC_PLATFORM=m
CONFIG_STMPE_I2C=y
CONFIG_STMPE_SPI=y
# CONFIG_STM_SOURCE_CONSOLE is not set
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_ST_REMOTEPROC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_STRICT_DEVMEM=y
Linux v4.10-2512-g7bb0338
2017-02-22 15:39:25 +00:00
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_STRICT_MODULE_RWX=y
Linux v4.13-11197-gf007cad159e9
2017-09-11 18:05:08 +00:00
# CONFIG_STRING_SELFTEST is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_STRIP is not set
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_ST_THERMAL=m
CONFIG_ST_THERMAL_MEMMAP=m
# CONFIG_ST_THERMAL_SYSCFG is not set
Linux v4.15-9939-g4bf772b14675
2018-02-02 20:38:32 +00:00
CONFIG_ST_UVIS25_I2C=m
CONFIG_ST_UVIS25=m
CONFIG_ST_UVIS25_SPI=m
Linux v4.13-11811-g46c1e79fee41
2017-09-14 16:54:39 +00:00
CONFIG_SUN4I_A10_CCU=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SUN4I_EMAC=m
Linux v4.11-10603-g13e0988
2017-05-08 17:38:14 +00:00
CONFIG_SUN4I_GPADC=m
- Enable Tiny DRM on ARM platforms - ARM config updates - General config cleanups - Add patch to fix desktop lockups on RPi (vc4) RHBZ# 1389163
2017-03-01 12:12:17 +00:00
CONFIG_SUN5I_CCU=y
CONFIG_SUN6I_A31_CCU=y
CONFIG_SUN8I_A23_CCU=y
CONFIG_SUN8I_A33_CCU=y
minor ARMv7 sunxi tweaks
2017-10-02 18:09:22 +00:00
CONFIG_SUN8I_A83T_CCU=y
CONFIG_SUN8I_DE2_CCU=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SUN8I_H3_CCU=y
Linux v4.13-11811-g46c1e79fee41
2017-09-14 16:54:39 +00:00
CONFIG_SUN8I_R40_CCU=y
Linux v4.11-13167-g791a9a6
2017-05-11 14:54:57 +00:00
CONFIG_SUN8I_R_CCU=y
- Enable Tiny DRM on ARM platforms - ARM config updates - General config cleanups - Add patch to fix desktop lockups on RPi (vc4) RHBZ# 1389163
2017-03-01 12:12:17 +00:00
CONFIG_SUN8I_V3S_CCU=y
CONFIG_SUN9I_A80_CCU=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
# CONFIG_SUNGEM is not set
CONFIG_SUN_PARTITION=y
CONFIG_SUNRPC_DEBUG=y
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC=m
Disable Infiniband/RDMA on ARMv7 as we no longer have userspace tools
2017-08-31 17:35:16 +00:00
# CONFIG_SUNRPC_XPRT_RDMA is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SUNXI_CCU=y
CONFIG_SUNXI_RSB=m
CONFIG_SUNXI_SRAM=y
CONFIG_SUNXI_WATCHDOG=m
disable a number of unused PATA/SATA drivers on ARM, don't build x86 specific drivers on other arches, minor tweaks to other arch specific configs
2017-10-01 18:33:34 +00:00
# CONFIG_SURFACE_3_BUTTON is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SUSPEND=y
CONFIG_SWAP=y
CONFIG_SWIOTLB=y
CONFIG_SWP_EMULATE=y
# CONFIG_SW_SYNC is not set
# CONFIG_SX9500 is not set
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_SYNC_FILE=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_SYNCLINK_CS is not set
CONFIG_SYNCLINK_GT=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYN_COOKIES=y
# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set
Minor ARM config cleanups
2017-04-25 12:01:29 +00:00
CONFIG_SYSCON_REBOOT_MODE=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SYSCTL=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SYSTEMPORT is not set
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_SYSV_FS is not set
CONFIG_SYSVIPC=y
# CONFIG_T5403 is not set
CONFIG_TABLET_SERIAL_WACOM4=m
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_PEGASUS=m
CONFIG_TARGET_CORE=m
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_TASKS_RCU=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_TASKSTATS=y
CONFIG_TASK_XACCT=y
CONFIG_TCG_ATMEL=m
Linux v4.16-10608-gf8cf2f16a7c9
2018-04-09 16:22:00 +00:00
CONFIG_TCG_CRB=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_TCG_INFINEON is not set
CONFIG_TCG_NSC=m
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
# CONFIG_TCG_TIS_SPI is not set
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
# CONFIG_TCG_TIS_ST33ZP24 is not set
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
Enable IMA (rhbz 790008)
2018-02-19 18:40:39 +00:00
CONFIG_TCG_TIS=y
CONFIG_TCG_TPM=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_TCG_VTPM_PROXY is not set
# CONFIG_TCG_XEN is not set
CONFIG_TCM_FC=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_PSCSI=m
# CONFIG_TCM_QLA2XXX_DEBUG is not set
CONFIG_TCM_QLA2XXX=m
CONFIG_TCM_USER2=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BBR=m
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CDG=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_DCTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_NV=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_MD5SIG=y
# CONFIG_TCS3414 is not set
CONFIG_TCS3472=m
Linux v4.11-13167-g791a9a6
2017-05-11 14:54:57 +00:00
# CONFIG_TEE is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_TEGRA124_EMC=y
CONFIG_TEGRA20_APB_DMA=y
CONFIG_TEGRA20_MC=y
CONFIG_TEGRA_AHB=y
Linux v4.14-12375-g2dcd9c71c1ff
2017-11-18 01:09:35 +00:00
# CONFIG_TEGRA_BPMP_THERMAL is not set
Linux v4.10-rc1 (didn't adjust debug options), ARM config updates, minor general config cleanups
2016-12-27 02:51:37 +00:00
CONFIG_TEGRA_BPMP=y
Linux v4.9-10415-g73e2e0c
2016-12-16 15:42:31 +00:00
CONFIG_TEGRA_GMI=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_TEGRA_HOST1X_FIREWALL=y
CONFIG_TEGRA_HOST1X=m
Linux v4.10-rc1 (didn't adjust debug options), ARM config updates, minor general config cleanups
2016-12-27 02:51:37 +00:00
CONFIG_TEGRA_HSP_MBOX=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_TEGRA_IOMMU_GART=y
CONFIG_TEGRA_IOMMU_SMMU=y
Linux v4.9-10415-g73e2e0c
2016-12-16 15:42:31 +00:00
CONFIG_TEGRA_IVC=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_TEGRA_MC=y
CONFIG_TEGRA_SOCTHERM=m
Linux v4.15-11704-ga2e5790d8416
2018-02-07 15:13:24 +00:00
CONFIG_TEGRA_VDE=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_TEGRA_WATCHDOG=m
CONFIG_TEHUTI=m
CONFIG_TELCLOCK=m
CONFIG_TERANETICS_PHY=m
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_BPF is not set
Linux v4.14-12891-gc8a0739b185d Also turn off a powerpc crypto drive that was failing to compile
2017-11-20 18:00:57 +00:00
# CONFIG_TEST_FIND_BIT is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_TEST_HEXDUMP is not set
Linux v4.13-rc1
2017-07-17 15:39:06 +00:00
# CONFIG_TEST_KMOD is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_TEST_KSTRTOX=y
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_LKM is not set
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
# CONFIG_TEST_PARMAN is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_TEST_POWER is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_RHASHTABLE is not set
Linux v4.10-10320-ge5d56ef
2017-02-27 16:49:14 +00:00
# CONFIG_TEST_SORT is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_STRING_HELPERS is not set
Linux v4.12-11618-gb86faee6d111
2017-07-14 15:44:07 +00:00
# CONFIG_TEST_SYSCTL is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_UUID is not set
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
Linux v4.12-rc1
2017-05-15 15:20:02 +00:00
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
CONFIG_THERMAL=y
CONFIG_THRUSTMASTER_FF=y
# CONFIG_THUMB2_KERNEL is not set
# CONFIG_THUNDERBOLT is not set
CONFIG_TI_ADC081C=m
# CONFIG_TI_ADC0832 is not set
Linux v4.12-3441-g1996454
2017-07-05 16:00:04 +00:00
# CONFIG_TI_ADC084S021 is not set
# CONFIG_TI_ADC108S102 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_TI_ADC12138 is not set
# CONFIG_TI_ADC128S052 is not set
# CONFIG_TI_ADC161S626 is not set
Various ARM updates
2017-05-24 11:27:01 +00:00
CONFIG_TI_ADS1015=m
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
# CONFIG_TI_ADS7950 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_TI_ADS8688 is not set
CONFIG_TI_AM335X_ADC=m
CONFIG_TI_CPPI41=m
CONFIG_TI_CPSW_ALE=m
CONFIG_TI_CPSW=m
CONFIG_TI_CPSW_PHY_SEL=y
Linux v4.11-rc3-161-gebe6482
2017-03-24 15:10:53 +00:00
CONFIG_TI_CPTS_MOD=m
CONFIG_TI_CPTS=y
Linux v4.14-2229-g894025f24bd0
2017-11-14 18:23:09 +00:00
# CONFIG_TI_DAC082S085 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_TI_DAC7512=m
CONFIG_TI_DAVINCI_CPDMA=m
CONFIG_TI_DAVINCI_EMAC=m
CONFIG_TI_DAVINCI_MDIO=m
CONFIG_TI_EDMA=y
CONFIG_TI_EMIF=m
Linux v4.15-9939-g4bf772b14675
2018-02-02 20:38:32 +00:00
CONFIG_TI_EMIF_SRAM=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_TIFM_7XX1=m
CONFIG_TIFM_CORE=m
Linux v4.11-4395-g89c9fea
2017-05-03 17:50:25 +00:00
CONFIG_TIGON3_HWMON=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_TIGON3=m
initial srpm import
2010-07-29 23:46:31 +00:00
# CONFIG_TIMB_DMA is not set
Linux v4.15-9939-g4bf772b14675
2018-02-02 20:38:32 +00:00
CONFIG_TINYDRM_ILI9225=m
- Enable Tiny DRM on ARM platforms - ARM config updates - General config cleanups - Add patch to fix desktop lockups on RPi (vc4) RHBZ# 1389163
2017-03-01 12:12:17 +00:00
CONFIG_TINYDRM_MI0283QT=m
CONFIG_TINYDRM_MIPI_DBI=m
Linux v4.13-4257-ge7d0c41ecc2e
2017-09-06 18:29:50 +00:00
# CONFIG_TINYDRM_REPAPER is not set
# CONFIG_TINYDRM_ST7586 is not set
Linux v4.15-9939-g4bf772b14675
2018-02-02 20:38:32 +00:00
CONFIG_TINYDRM_ST7735R=m
Linux v4.16-5456-g17dec0a94915
2018-04-04 17:45:22 +00:00
CONFIG_TIPC_DIAG=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_TIPC=m
# CONFIG_TIPC_MEDIA_IB is not set
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TI_PIPE3=m
Linux v4.12-10317-gaf3c8d9
2017-07-10 15:40:53 +00:00
# CONFIG_TI_SCI_CLK is not set
Linux v4.9-10415-g73e2e0c
2016-12-16 15:42:31 +00:00
CONFIG_TI_SCI_PROTOCOL=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_TI_SOC_THERMAL=m
minor ARM tweaks
2017-09-04 12:01:29 +00:00
# CONFIG_TI_ST is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_TI_THERMAL=y
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
# CONFIG_TI_TLC4541 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_TLAN is not set
Linux v4.12-6090-g9b51f04
2017-07-06 16:11:57 +00:00
CONFIG_TLS=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_TMD_HERMES is not set
CONFIG_TMP006=m
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
# CONFIG_TMP007 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_TMPFS=y
CONFIG_TOUCHSCREEN_AD7877=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_ADS7846=m
# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
# CONFIG_TOUCHSCREEN_BU21013 is not set
CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=m
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
CONFIG_TOUCHSCREEN_DA9052=m
CONFIG_TOUCHSCREEN_DYNAPRO=m
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_EGALAX=m
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=m
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
CONFIG_TOUCHSCREEN_ELAN=m
CONFIG_TOUCHSCREEN_ELO=m
Linux v4.14-4050-g37cb8e1f8e10
2017-11-15 17:40:48 +00:00
# CONFIG_TOUCHSCREEN_EXC3000 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_TOUCHSCREEN_FT6236 is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
# CONFIG_TOUCHSCREEN_GOODIX is not set
CONFIG_TOUCHSCREEN_GUNZE=m
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
Linux v4.14-4050-g37cb8e1f8e10
2017-11-15 17:40:48 +00:00
# CONFIG_TOUCHSCREEN_HIDEEP is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_TOUCHSCREEN_ILI210X=m
CONFIG_TOUCHSCREEN_IMX6UL_TSC=m
CONFIG_TOUCHSCREEN_INEXIO=m
# CONFIG_TOUCHSCREEN_MAX11801 is not set
CONFIG_TOUCHSCREEN_MC13783=m
CONFIG_TOUCHSCREEN_MCS5000=m
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_MMS114=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_PIXCIR=m
CONFIG_TOUCHSCREEN_RM_TS=m
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
Linux v4.14-4050-g37cb8e1f8e10
2017-11-15 17:40:48 +00:00
# CONFIG_TOUCHSCREEN_S6SY761 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_TOUCHSCREEN_SILEAD=m
CONFIG_TOUCHSCREEN_SIS_I2C=m
CONFIG_TOUCHSCREEN_ST1232=m
Linux v4.12-10317-gaf3c8d9
2017-07-10 15:40:53 +00:00
# CONFIG_TOUCHSCREEN_STMFTS is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_TOUCHSCREEN_STMPE=m
CONFIG_TOUCHSCREEN_SUN4I=m
# CONFIG_TOUCHSCREEN_SUR40 is not set
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_TOUCHSCREEN_TS4800=m
# CONFIG_TOUCHSCREEN_TSC2004 is not set
CONFIG_TOUCHSCREEN_TSC2005=m
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
CONFIG_TOUCHSCREEN_TSC2007_IIO=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_TOUCHSCREEN_TSC2007=m
CONFIG_TOUCHSCREEN_TSC_SERIO=m
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_W90X900=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
Linux v4.10-9579-gf1ef09f Includes config options from yesterday that were missed
2017-02-24 16:50:29 +00:00
CONFIG_TOUCHSCREEN_ZET6223=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_TOUCHSCREEN_ZFORCE=m
# CONFIG_TPL0102 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
Linux v4.14-2229-g894025f24bd0
2017-11-14 18:23:09 +00:00
# CONFIG_TPS68470_PMIC_OPREGION is not set
initial srpm import
2010-07-29 23:46:31 +00:00
# CONFIG_TRACE_BRANCH_PROFILING is not set
Linux v4.0-3843-gbb0fd7ab0986
2015-04-15 14:47:18 +00:00
# CONFIG_TRACE_ENUM_MAP_FILE is not set
Linux v4.12-7934-g9f45efb
2017-07-07 14:59:21 +00:00
CONFIG_TRACE_EVAL_MAP_FILE=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACE_SINK is not set
Linux v4.3-9269-gce5c2d2
2015-11-09 17:56:21 +00:00
# CONFIG_TRACING_EVENTS_GPIO is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_TR is not set
CONFIG_TRUSTED_FOUNDATIONS=y
CONFIG_TRUSTED_KEYS=m
# CONFIG_TS4800_IRQ is not set
# CONFIG_TS4800_WATCHDOG is not set
# CONFIG_TSL2583 is not set
# CONFIG_TSL2x7x is not set
# CONFIG_TSL4531 is not set
# CONFIG_TSYS01 is not set
# CONFIG_TSYS02D is not set
CONFIG_TULIP=m
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_TWL4030_CORE=y
CONFIG_TWL4030_MADC=m
CONFIG_TWL4030_POWER=y
CONFIG_TWL4030_USB=m
CONFIG_TWL4030_WATCHDOG=m
CONFIG_TWL6030_GPADC=m
CONFIG_TWL6030_USB=m
CONFIG_TWL6040_CORE=y
Linux v4.11-8539-gaf82455
2017-05-05 18:07:47 +00:00
CONFIG_TYPEC_FUSB302=m
Linux v4.15-rc2-174-g328b4ed93b69
2017-12-06 17:47:01 +00:00
CONFIG_TYPEC=m
Linux v4.16-7248-g06dd3dfeea60
2018-04-05 17:30:09 +00:00
CONFIG_TYPEC_MUX_PI3USB30532=m
Linux v4.11-8539-gaf82455
2017-05-05 18:07:47 +00:00
CONFIG_TYPEC_TCPCI=m
CONFIG_TYPEC_TCPM=m
Linux v4.14-2229-g894025f24bd0
2017-11-14 18:23:09 +00:00
CONFIG_TYPEC_TPS6598X=m
Linux v4.12-3441-g1996454
2017-07-05 16:00:04 +00:00
CONFIG_TYPEC_UCSI=m
Linux v4.11-8539-gaf82455
2017-05-05 18:07:47 +00:00
CONFIG_TYPEC_WCOVE=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_TYPHOON=m
# CONFIG_UACCESS_WITH_MEMCPY is not set
CONFIG_UBIFS_ATIME_SUPPORT=y
Various ARM updates
2017-05-24 11:27:01 +00:00
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
Linux v4.9-10415-g73e2e0c
2016-12-16 15:42:31 +00:00
CONFIG_UBIFS_FS_ENCRYPTION=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_UBIFS_FS=m
Linux v4.12-rc1
2017-05-15 15:20:02 +00:00
CONFIG_UBIFS_FS_SECURITY=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_UBSAN_ALIGNMENT is not set
# CONFIG_UBSAN is not set
# CONFIG_UBSAN_SANITIZE_ALL is not set
# CONFIG_UCB1400_CORE is not set
Linux v4.12-3441-g1996454
2017-07-05 16:00:04 +00:00
CONFIG_UCSI_ACPI=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_UCSI=m
CONFIG_UDF_FS=m
# CONFIG_UEVENT_HELPER is not set
# CONFIG_UFS_DEBUG is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
CONFIG_UHID=m
CONFIG_UIO_AEC=m
initial srpm import
2010-07-29 23:46:31 +00:00
CONFIG_UIO_CIF=m
Linux v3.8-rc2-116-g5f243b9
2013-01-04 21:16:10 +00:00
# CONFIG_UIO_DMEM_GENIRQ is not set
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_UIO_HV_GENERIC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_UIO=m
Linux v3.11-782-g1d1fdd9
2013-09-04 11:12:06 +00:00
# CONFIG_UIO_MF624 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_UIO_NETX is not set
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_PDRV is not set
CONFIG_UIO_PRUSS=m
CONFIG_UIO_SERCOS3=m
CONFIG_ULI526X=m
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_UNISYSSPAR is not set
Linux v4.15-9939-g4bf772b14675
2018-02-02 20:38:32 +00:00
# CONFIG_UNISYS_VISORBUS is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX_DIAG=m
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_UNIX=y
CONFIG_UNUSED_SYMBOLS=y
Linux v4.11-rc1-88-gec3b93a
2017-03-08 15:51:06 +00:00
CONFIG_UPROBE_EVENTS=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_US5182D is not set
CONFIG_USB_ACM=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_ALI_M5632=y
# CONFIG_USB_AMD5536UDC is not set
CONFIG_USB_AN2720=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_ARMLINUX=y
CONFIG_USB_ATMEL=m
CONFIG_USB_ATM=m
# CONFIG_USB_BDC_UDC is not set
CONFIG_USB_BELKIN=y
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_CATC=m
CONFIG_USB_CDC_PHONET=m
CONFIG_USB_CHAOSKEY=m
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_CHIPIDEA=m
CONFIG_USB_CHIPIDEA_UDC=y
USB_CHIPIDEA_ULPI only does build in to base USB_CHIPIDEA
2017-07-02 14:52:22 +00:00
CONFIG_USB_CHIPIDEA_ULPI=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_USB_CONFIGFS_ACM=y
CONFIG_USB_CONFIGFS_ECM_SUBSET=y
CONFIG_USB_CONFIGFS_ECM=y
CONFIG_USB_CONFIGFS_EEM=y
# CONFIG_USB_CONFIGFS_F_FS is not set
Fix up -CONFIG_USB_CONFIGFS_F_HID
2017-08-29 18:29:53 +00:00
CONFIG_USB_CONFIGFS_F_HID=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_USB_CONFIGFS_F_LB_SS is not set
# CONFIG_USB_CONFIGFS_F_MIDI is not set
# CONFIG_USB_CONFIGFS_F_PRINTER is not set
CONFIG_USB_CONFIGFS_F_TCM=y
# CONFIG_USB_CONFIGFS_F_UAC1 is not set
Linux v4.12-3441-g1996454
2017-07-05 16:00:04 +00:00
# CONFIG_USB_CONFIGFS_F_UAC1_LEGACY is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_USB_CONFIGFS_F_UAC2 is not set
# CONFIG_USB_CONFIGFS_F_UVC is not set
CONFIG_USB_CONFIGFS=m
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_USB_CONFIGFS_NCM=y
CONFIG_USB_CONFIGFS_OBEX=y
# CONFIG_USB_CONFIGFS_RNDIS is not set
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CXACRU=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_DEBUG is not set
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_DSBR=m
# CONFIG_USB_DUMMY_HCD is not set
# CONFIG_USB_DWC2_DEBUG is not set
CONFIG_USB_DWC2_DUAL_ROLE=y
CONFIG_USB_DWC2=m
CONFIG_USB_DWC2_PCI=m
# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
CONFIG_USB_DWC3_DUAL_ROLE=y
CONFIG_USB_DWC3_EXYNOS=m
CONFIG_USB_DWC3=m
CONFIG_USB_DWC3_OF_SIMPLE=m
CONFIG_USB_DWC3_OMAP=m
CONFIG_USB_DWC3_PCI=m
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_USB_DWC3_ST=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_USB_DWC3_ULPI=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_EG20T is not set
CONFIG_USB_EHCI_EXYNOS=m
CONFIG_USB_EHCI_HCD_OMAP=m
CONFIG_USB_EHCI_HCD_ORION=m
CONFIG_USB_EHCI_HCD_PLATFORM=m
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_USB_EHCI_HCD_STI=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_MV is not set
CONFIG_USB_EHCI_MXC=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TEGRA=m
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_EMI26=m
CONFIG_USB_EMI62=m
CONFIG_USB_EPSON2888=y
CONFIG_USB_EZUSB_FX2=m
CONFIG_USB_EZUSB=y
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_FOTG210_UDC is not set
CONFIG_USB_FSL_USB2=m
CONFIG_USB_FTDI_ELAN=m
# CONFIG_USB_FUSB300 is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGETFS is not set
Linux v4.15-rc2-174-g328b4ed93b69
2017-12-06 17:47:01 +00:00
# CONFIG_USB_GADGET_LEGACY is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
CONFIG_USB_GADGET_VBUS_DRAW=100
CONFIG_USB_GADGET_XILINX=m
CONFIG_USB_GL860=m
# CONFIG_USB_GOKU is not set
CONFIG_USB_GPIO_VBUS=m
# CONFIG_USB_GR_UDC is not set
CONFIG_USB_G_SERIAL=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
CONFIG_USB_GSPCA_DTCS033=m
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
CONFIG_USB_GSPCA_KINECT=m
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_STK1135=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
CONFIG_USB_GSPCA_TOUPTEK=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set
CONFIG_USB_HIDDEV=y
CONFIG_USB_HID=y
CONFIG_USB_HSIC_USB3503=m
CONFIG_USB_HSIC_USB4604=m
CONFIG_USB_HSO=m
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
CONFIG_USB_HUB_USB251XB=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_USB_HWA_HCD=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_IMX21_HCD=m
CONFIG_USB_INVENTRA_DMA=y
CONFIG_USB_IOWARRIOR=m
CONFIG_USBIP_CORE=m
# CONFIG_USBIP_DEBUG is not set
CONFIG_USB_IPHETH=m
CONFIG_USBIP_HOST=m
CONFIG_USBIP_VHCI_HCD=m
CONFIG_USBIP_VHCI_HC_PORTS=8
CONFIG_USBIP_VHCI_NR_HCS=1
CONFIG_USBIP_VUDC=m
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1301 is not set
CONFIG_USB_ISP1362_HCD=m
CONFIG_USB_ISP1760=m
CONFIG_USB_KAWETH=m
CONFIG_USB_KC2190=y
CONFIG_USB_KEENE=m
CONFIG_USB_LAN78XX=m
CONFIG_USB_LCD=m
CONFIG_USB_LD=m
CONFIG_USB_LEDS_TRIGGER_USBPORT=m
CONFIG_USB_LED_TRIG=y
CONFIG_USB_LEGOTOWER=m
# CONFIG_USB_LINK_LAYER_TEST is not set
CONFIG_USB_M5602=m
# CONFIG_USB_M66592 is not set
CONFIG_USB_MA901=m
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_MON=y
CONFIG_USB_MR800=m
CONFIG_USB_MUSB_AM335X_CHILD=m
CONFIG_USB_MUSB_AM35X=m
CONFIG_USB_MUSB_DSPS=m
CONFIG_USB_MUSB_DUAL_ROLE=y
CONFIG_USB_MUSB_HDRC=m
CONFIG_USB_MUSB_OMAP2PLUS=m
CONFIG_USB_MUSB_SUNXI=m
# CONFIG_USB_MUSB_TUSB6010 is not set
# CONFIG_USB_MV_U3D is not set
CONFIG_USB_MV_UDC=m
CONFIG_USB_MXS_PHY=m
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_NET2280 is not set
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_NET_CH9200=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_SR9700=m
# CONFIG_USB_NET_SR9800 is not set
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_OHCI_EXYNOS=m
CONFIG_USB_OHCI_HCD_OMAP3=m
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_HCD_PLATFORM=m
# CONFIG_USB_OHCI_HCD_SSB is not set
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_USB_OHCI_HCD_STI=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
minor ARM usb cleanups
2018-03-04 11:27:28 +00:00
CONFIG_USB_OTG_FSM=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_OTG=y
# CONFIG_USB_OXU210HP_HCD is not set
Linux v4.11-8539-gaf82455
2017-05-05 18:07:47 +00:00
CONFIG_USB_PCI=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_USBPCWATCHDOG=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_PHY=y
CONFIG_USB_PRINTER=m
Linux v4.9-11744-gb0b3a37
2016-12-19 21:11:15 +00:00
CONFIG_USB_PULSE8_CEC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_USB_PWC=m
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_R8A66597 is not set
Linux v4.11-10603-g13e0988
2017-05-08 17:38:14 +00:00
CONFIG_USB_RAINSHADOW_CEC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_RIO500 is not set
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
CONFIG_USB_S2255=m
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_DEBUG=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_EMPEG=m
# CONFIG_USB_SERIAL_F81232 is not set
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_USB_SERIAL_F8153X=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MXUPORT is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QT2=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
CONFIG_USB_SERIAL_UPD78F0730=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_WHITEHEAT=m
# CONFIG_USB_SERIAL_WISHBONE is not set
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_XSENS_MT=m
CONFIG_USB_SERIAL=y
CONFIG_USB_SEVSEG=m
CONFIG_USB_SI470X=m
# CONFIG_USB_SI4713 is not set
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SL811_CS is not set
CONFIG_USB_SL811_HCD_ISO=y
CONFIG_USB_SL811_HCD=m
Linux v4.12-3441-g1996454
2017-07-05 16:00:04 +00:00
CONFIG_USB_SNP_UDC_PLAT=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_DATAFAB=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_USB_STORAGE_USBAT=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_USB_STV06XX=m
CONFIG_USB_SUPPORT=y
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_USB_TEST is not set
CONFIG_USB_TI_CPPI41_DMA=y
CONFIG_USB_TMC=m
CONFIG_USB_TRANCEVIBRATOR=m
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_UAS=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_ULPI_BUS=m
CONFIG_USB_ULPI=y
CONFIG_USB_USBNET=m
CONFIG_USB_USS720=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VL600=m
CONFIG_USB_WDM=m
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
CONFIG_USB_WUSB_CBAF=m
CONFIG_USB_WUSB=m
Linux v4.15-9939-g4bf772b14675
2018-02-02 20:38:32 +00:00
CONFIG_USB_XHCI_DBGCAP=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_MVEBU=m
CONFIG_USB_XHCI_PLATFORM=m
CONFIG_USB_XHCI_TEGRA=m
CONFIG_USB_XUSBATM=m
CONFIG_USB=y
CONFIG_USB_YUREX=m
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_ZERO_HNPTEST is not set
CONFIG_USB_ZR364XX=m
# CONFIG_USELIB is not set
CONFIG_USE_OF=y
CONFIG_USERFAULTFD=y
CONFIG_U_SERIAL_CONSOLE=y
# CONFIG_USERIO is not set
CONFIG_USER_NS=y
Linux v4.9-11744-gb0b3a37
2016-12-19 21:11:15 +00:00
# CONFIG_USE_THIN_ARCHIVES is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_UTS_NS=y
CONFIG_UWB_HWA=m
CONFIG_UWB_I1480U=m
CONFIG_UWB=m
CONFIG_UWB_WHCI=m
# CONFIG_V4L2_FLASH_LED_CLASS is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_VCNL4000 is not set
# CONFIG_VDSO is not set
# CONFIG_VEML6070 is not set
CONFIG_VETH=m
CONFIG_VEXPRESS_SYSCFG=y
# CONFIG_VF610_ADC is not set
# CONFIG_VF610_DAC is not set
CONFIG_VFAT_FS=m
CONFIG_VFIO_AMBA=m
Enable VFIO (rhbz 867152)
2012-10-18 12:39:41 +00:00
CONFIG_VFIO_IOMMU_TYPE1=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_VFIO=m
Linux v4.9-7150-gcdb98c2
2016-12-14 18:50:48 +00:00
CONFIG_VFIO_MDEV_DEVICE=m
CONFIG_VFIO_MDEV=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_PCI=m
# CONFIG_VFIO_PLATFORM_AMDXGBE_RESET is not set
CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET=m
CONFIG_VFIO_PLATFORM=m
CONFIG_VFPv3=y
CONFIG_VFP=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_ARB=y
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGA_CONSOLE=y
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
CONFIG_VHOST_NET=m
CONFIG_VHOST_SCSI=m
CONFIG_VHOST_VSOCK=m
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_VELOCITY=m
CONFIG_VIDEO_ADP1653=m
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_AM437X_VPFE=m
CONFIG_VIDEO_AU0828=m
# CONFIG_VIDEO_AU0828_RC is not set
CONFIG_VIDEO_AU0828_V4L2=y
Linux v4.11-10603-g13e0988
2017-05-08 17:38:14 +00:00
# CONFIG_VIDEO_BCM2835 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_VIDEO_CODA=m
CONFIG_VIDEO_CPIA2=m
# CONFIG_VIDEO_CPIA is not set
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX23885=m
# CONFIG_VIDEO_CX25821 is not set
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_DEV=m
# CONFIG_VIDEO_DM355_CCDC is not set
# CONFIG_VIDEO_DM6446_CCDC is not set
# CONFIG_VIDEO_DT3155 is not set
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_VIDEO_EM28XX_RC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_VIDEO_EM28XX_V4L2=m
CONFIG_VIDEO_EXYNOS4_FIMC_IS=m
CONFIG_VIDEO_EXYNOS4_ISP_DMA_CAPTURE=y
CONFIG_VIDEO_EXYNOS_FIMC_LITE=m
CONFIG_VIDEO_FB_IVTV=m
initial srpm import
2010-07-29 23:46:31 +00:00
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_VIDEO_GO7007_LOADER=m
CONFIG_VIDEO_GO7007=m
CONFIG_VIDEO_GO7007_USB=m
CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_HEXIUM_ORION=m
Linux v4.12-7934-g9f45efb
2017-07-07 14:59:21 +00:00
# CONFIG_VIDEO_IMX_MEDIA is not set
- Enable Tiny DRM on ARM platforms - ARM config updates - General config cleanups - Add patch to fix desktop lockups on RPi (vc4) RHBZ# 1389163
2017-03-01 12:12:17 +00:00
CONFIG_VIDEO_IMX_VDOA=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_VIDEO_IVTV_ALSA is not set
Linux v4.10-2512-g7bb0338
2017-02-22 15:39:25 +00:00
# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_M5MOLS is not set
# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set
Linux v4.13-9219-g015a9e66b9b8
2017-09-08 22:21:55 +00:00
CONFIG_VIDEO_MESON_AO_CEC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_VIDEO_MEYE=m
Linux v4.12-7934-g9f45efb
2017-07-07 14:59:21 +00:00
CONFIG_VIDEO_MUX=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_NOON010PC30=m
# CONFIG_VIDEO_OMAP2_VOUT is not set
# CONFIG_VIDEO_OMAP3_DEBUG is not set
CONFIG_VIDEO_OMAP3=m
# CONFIG_VIDEO_OMAP4 is not set
Linux v3.17-2860-gef0625b70dac - Reenable debugging options. - Temporarily disable aarch64patches
2014-10-08 16:10:10 +00:00
# CONFIG_VIDEO_PCI_SKELETON is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_PVRUSB2_DVB=y
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
cleanup some deprecated options, minor arm config tweaks
2017-09-24 14:23:59 +00:00
CONFIG_VIDEO_QCOM_CAMSS=m
Minor updates for ARM
2017-07-13 16:06:15 +00:00
CONFIG_VIDEO_QCOM_VENUS=m
Linux v4.14-9248-ge60e1ee60630
2017-11-16 17:50:37 +00:00
CONFIG_VIDEO_ROCKCHIP_RGA=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_VIDEO_S5P_FIMC=m
CONFIG_VIDEO_S5P_MIPI_CSIS=m
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7134_GO7007=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_SAA7164=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m
Linux v4.10-rc1 (didn't adjust debug options), ARM config updates, minor general config cleanups
2016-12-27 02:51:37 +00:00
# CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC is not set
Linux v4.9-11744-gb0b3a37
2016-12-19 21:11:15 +00:00
CONFIG_VIDEO_SAMSUNG_S5P_CEC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_VIDEO_SAMSUNG_S5P_G2D=m
CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
# CONFIG_VIDEO_SAMSUNG_S5P_TV is not set
# CONFIG_VIDEO_SH_MOBILE_CEU is not set
# CONFIG_VIDEO_SH_MOBILE_CSI2 is not set
# CONFIG_VIDEO_SH_VEU is not set
CONFIG_VIDEO_SOLO6X10=m
CONFIG_VIDEO_SR030PC30=m
Update kernel source location now ftp is retired, Enable STi h407 SoC
2017-03-13 00:34:43 +00:00
CONFIG_VIDEO_STI_BDISP=m
CONFIG_VIDEO_STI_DELTA_DRIVER=m
CONFIG_VIDEO_STI_DELTA=m
CONFIG_VIDEO_STI_DELTA_MJPEG=y
CONFIG_VIDEO_STI_HDMI_CEC=m
# CONFIG_VIDEO_STI_HVA_DEBUGFS is not set
CONFIG_VIDEO_STI_HVA=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_VIDEO_STK1160_AC97=y
CONFIG_VIDEO_STK1160_COMMON=m
CONFIG_VIDEO_STK1160=m
Linux v4.14-9248-ge60e1ee60630
2017-11-16 17:50:37 +00:00
CONFIG_VIDEO_TEGRA_HDMI_CEC=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TUNER=m
# CONFIG_VIDEO_TW5864 is not set
# CONFIG_VIDEO_TW686X_KH is not set
CONFIG_VIDEO_TW686X=m
# CONFIG_VIDEO_TW68 is not set
CONFIG_VIDEO_USBTV=m
CONFIG_VIDEO_USBVISION=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_VIDEO_V4L2=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_VIDEO_VIVID is not set
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_XILINX is not set
CONFIG_VIDEO_ZORAN_AVS6EYES=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_ZR36060=m
# CONFIG_VIPERBOARD_ADC is not set
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_BLK=m
Disable CONFIG_VIRTIO_BLK_SCSI Per comments from Christoph Hellwig lkml.kernel.org/r/<20170917235731.GA31789@infradead.org>
2017-09-19 17:14:46 +00:00
# CONFIG_VIRTIO_BLK_SCSI is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_VIRTIO_CONSOLE=m
CONFIG_VIRTIO_INPUT=m
Linux v4.15-12216-gf9f1e414128e
2018-02-09 22:05:09 +00:00
CONFIG_VIRTIO_MENU=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
CONFIG_VIRTIO_MMIO=m
CONFIG_VIRTIO_NET=m
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_VSOCKETS=m
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_VIRTUALIZATION=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_VITESSE_PHY=m
Linux v4.11-10603-g13e0988
2017-05-08 17:38:14 +00:00
CONFIG_VL6180=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_VME_BUS is not set
# CONFIG_VMXNET3 is not set
CONFIG_VORTEX=m
Linux v4.14-9248-ge60e1ee60630
2017-11-16 17:50:37 +00:00
CONFIG_VSOCKETS_DIAG=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_VSOCKETS=m
Linux v4.11-4395-g89c9fea
2017-05-03 17:50:25 +00:00
CONFIG_VSOCKMON=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
CONFIG_VT_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_VT=y
# CONFIG_VXFS_FS is not set
# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
CONFIG_VXGE=m
CONFIG_VXLAN=m
# CONFIG_VZ89X is not set
CONFIG_W1_CON=y
CONFIG_W1=m
Linux v4.10-rc1 (didn't adjust debug options), ARM config updates, minor general config cleanups
2016-12-27 02:51:37 +00:00
# CONFIG_W1_MASTER_DS1WM is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_GPIO=m
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_MXC=m
CONFIG_W1_SLAVE_BQ27000=m
Linux v4.10-6476-gbc49a78
2017-02-23 17:11:17 +00:00
CONFIG_W1_SLAVE_DS2405=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_W1_SLAVE_DS2406=m
CONFIG_W1_SLAVE_DS2408=m
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
CONFIG_W1_SLAVE_DS2413=m
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2433=m
Linux v4.11-8539-gaf82455
2017-05-05 18:07:47 +00:00
CONFIG_W1_SLAVE_DS2438=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_W1_SLAVE_DS2760=m
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
Linux v4.13-4257-ge7d0c41ecc2e
2017-09-06 18:29:50 +00:00
CONFIG_W1_SLAVE_DS2805=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_W1_SLAVE_DS28E04=m
Linux v4.14-12375-g2dcd9c71c1ff
2017-11-18 01:09:35 +00:00
# CONFIG_W1_SLAVE_DS28E17 is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_THERM=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
# CONFIG_WAFER_WDT is not set
# CONFIG_WAN is not set
Linux v4.13-rc1
2017-07-17 15:39:06 +00:00
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_WATCHDOG_CORE=y
Linux v4.12-10784-g3b06b1a7448e
2017-07-12 14:17:51 +00:00
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
CONFIG_WATCHDOG_SYSFS=y
CONFIG_WATCHDOG=y
# CONFIG_WCN36XX_DEBUGFS is not set
CONFIG_WCN36XX=m
CONFIG_WDAT_WDT=m
CONFIG_WDTPCI=m
Linux v4.13-6657-g3b9f8ed25dbe
2017-09-07 21:18:25 +00:00
CONFIG_WIL6210_DEBUGFS=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_WIL6210_ISR_COR=y
CONFIG_WIL6210=m
# CONFIG_WIL6210_TRACING is not set
# CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set
CONFIG_WILINK_PLATFORM_DATA=y
# CONFIG_WIMAX is not set
CONFIG_WINBOND_840=m
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS=y
CONFIG_WIZNET_W5100=m
CONFIG_WIZNET_W5100_SPI=m
CONFIG_WIZNET_W5300=m
CONFIG_WKUP_M3_IPC=m
CONFIG_WKUP_M3_RPROC=m
CONFIG_WL1251=m
CONFIG_WL1251_SDIO=m
CONFIG_WL1251_SPI=m
CONFIG_WL12XX=m
CONFIG_WL18XX=m
# CONFIG_WLAN_VENDOR_ADMTEK is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_WLAN_VENDOR_ATMEL is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_WLAN_VENDOR_CISCO is not set
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_WLAN_VENDOR_MEDIATEK=y
Linux v4.12-6090-g9b51f04
2017-07-06 16:11:57 +00:00
CONFIG_WLAN_VENDOR_QUANTENNA=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_WLAN=y
CONFIG_WLCORE=m
CONFIG_WLCORE_SDIO=m
CONFIG_WLCORE_SPI=m
# CONFIG_WM831X_POWER is not set
CONFIG_WM831X_WATCHDOG=m
CONFIG_WM8350_POWER=m
CONFIG_WM8350_WATCHDOG=m
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
# CONFIG_WQ_WATCHDOG is not set
Linux v4.10-1242-g9763dd6
2017-02-21 19:21:44 +00:00
# CONFIG_WW_MUTEX_SELFTEST is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_X25 is not set
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
Linux v4.11-1464-gd3b5d35
2017-05-02 19:04:44 +00:00
CONFIG_X86_MCELOG_LEGACY=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_X86_PTDUMP is not set
# CONFIG_XEN is not set
Linux v4.14-12375-g2dcd9c71c1ff
2017-11-18 01:09:35 +00:00
# CONFIG_XEN_PVCALLS_FRONTEND is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_USER=y
CONFIG_XFRM=y
# CONFIG_XFS_DEBUG is not set
CONFIG_XFS_FS=m
Linux v4.16-10608-gf8cf2f16a7c9
2018-04-09 16:22:00 +00:00
CONFIG_XFS_ONLINE_SCRUB=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XILINX_DMA is not set
CONFIG_XILINX_EMACLITE=m
CONFIG_XILINX_GMII2RGMII=m
Linux v4.15-9939-g4bf772b14675
2018-02-02 20:38:32 +00:00
CONFIG_XILINX_VCU=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_XILINX_WATCHDOG=m
CONFIG_XILINX_XADC=m
# CONFIG_XILINX_ZYNQMP_DMA is not set
CONFIG_XILLYBUS=m
CONFIG_XILLYBUS_OF=m
CONFIG_XILLYBUS_PCIE=m
# CONFIG_XIP_KERNEL is not set
CONFIG_XZ_DEC_ARMTHUMB=y
enable appropriate CONFIG_XZ_DEC_$arch options
2014-02-28 18:41:08 +00:00
CONFIG_XZ_DEC_ARM=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_XZ_DEC_IA64=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_XZ_DEC_POWERPC=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_XZ_DEC_SPARC=y
snapshot 2.6.37-git12
2011-01-15 05:56:55 +00:00
# CONFIG_XZ_DEC_TEST is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC=y
CONFIG_YAM=m
CONFIG_YELLOWFIN=m
CONFIG_YENTA=m
CONFIG_Z3FOLD=y
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBUD=y
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_ZD1211RW=m
CONFIG_ZEROPLUS_FF=y
# CONFIG_ZIIRAVE_WATCHDOG is not set
CONFIG_ZISOFS=y
Add script to check config generation The kernel configuration generation currently checks to make sure every option is defined with listnewconfig. It does not check that each option is the same as listnewconfig. This can lead to odd situations where the Fedora configuration does not match what's actually present in the generated config. Add a script to check for these kinds of changes. Based on work done by Miguel Flores Silverio <floresmigu3l@gmail.com>
2016-12-02 22:18:11 +00:00
CONFIG_ZLIB_DEFLATE=y
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
CONFIG_ZLIB_INFLATE=y
Linux v4.15-9939-g4bf772b14675
2018-02-02 20:38:32 +00:00
CONFIG_ZOPT2201=m
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_ZPA2326 is not set
CONFIG_ZRAM=m
Linux v4.13-6657-g3b9f8ed25dbe
2017-09-07 21:18:25 +00:00
# CONFIG_ZRAM_WRITEBACK is not set
Change method of configuration generation The existing method of managing configuration files gets unweildy. Changing individual lines in text files gets difficult without manual organization. Switch to a method of configuration generation that's inspired from the method used inside Red Hat. Each configuration option gets its own file which are then combined to form the configuration files. This makes confirming what's actually enabled much easier.
2016-11-10 18:16:25 +00:00
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_ZSMALLOC=y
CONFIG_ZSWAP=y
Linux v4.11-7650-ga1be8ed
2017-05-04 17:24:40 +00:00
# CONFIG_ZX_TDM is not set
Reference in New Issue Copy Permalink