kernel/config-x86_64-generic

CONFIG_64BIT=y

# CONFIG_X86_X32 is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_GENERIC_CPU=y

# CONFIG_X86_VSMP is not set
CONFIG_X86_UV=y
CONFIG_UV_MMTIMER=m
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_ACPI_NFIT=m
# CONFIG_ACPI_NFIT_DEBUG is not set
# CONFIG_NUMA_EMU is not set
CONFIG_X86_NUMACHIP=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_NUMA_BALANCING=y

# https://lists.fedoraproject.org/pipermail/kernel/2013-November/004601.html
CONFIG_NR_CPUS=1024
CONFIG_PHYSICAL_START=0x1000000
CONFIG_PHYSICAL_ALIGN=0x1000000

# https://lists.fedoraproject.org/pipermail/kernel/2013-December/004753.html
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536

# enable the 32-bit entry point for Baytrail
CONFIG_EFI_MIXED=y

CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set

CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_STATS=y
CONFIG_AMD_IOMMU_V2=m
# CONFIG_IOMMU_DEBUG is not set
CONFIG_SWIOTLB=y
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_GART_IOMMU is not set

CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_MEM_SOFT_DIRTY=y

CONFIG_KEXEC_JUMP=y
CONFIG_KEXEC_FILE=y
CONFIG_KEXEC_VERIFY_SIG=y
CONFIG_KEXEC_BZIMAGE_VERIFY_SIG=y

CONFIG_ACPI_HOTPLUG_MEMORY=y

# CONFIG_INTEL_SCU_IPC is not set

CONFIG_SCIF_BUS=m
CONFIG_SCIF=m

CONFIG_INTEL_MIC_HOST=m
CONFIG_INTEL_MIC_CARD=m
CONFIG_INTEL_MIC_BUS=m
CONFIG_INTEL_MIC_X100_DMA=m
CONFIG_MIC_COSM=m

# SHPC has half-arsed PCI probing, which makes it load on too many systems
CONFIG_HOTPLUG_PCI_SHPC=m

# CONFIG_CRYPTO_SHA1_MB is not set
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
CONFIG_CRYPTO_SHA1_SSSE3=m
CONFIG_CRYPTO_SHA256_SSSE3=m
CONFIG_CRYPTO_SHA512_SSSE3=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m
CONFIG_CRYPTO_DES3_EDE_X86_64=m
CONFIG_CRYPTO_POLY1305_X86_64=m
CONFIG_CRYPTO_CHACHA20_X86_64=m
# staging crypto
# CONFIG_CRYPTO_SKEIN is not set

# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set

CONFIG_EDAC_AMD64=m
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
CONFIG_EDAC_SBRIDGE=m

# CONFIG_PC8736x_GPIO is not set

# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MOVABLE_NODE is not set
CONFIG_MEMORY_HOTPLUG=y
# CONFIG_ARCH_MEMORY_PROBE is not set
CONFIG_MEMORY_HOTREMOVE=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set 

# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set

CONFIG_SGI_IOC4=m
CONFIG_SGI_XP=m
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set

# CONFIG_VIDEO_CAFE_CCIC is not set

CONFIG_XEN_MAX_DOMAIN_MEMORY=128
# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set
CONFIG_XEN_DEV_EVTCHN=m
CONFIG_XEN_SYS_HYPERVISOR=y
# CONFIG_XEN_MCE_LOG is not set
# CONFIG_XEN_STUB is not set
CONFIG_XEN_PVH=y
CONFIG_XEN_512GB=y

CONFIG_PROVIDE_OHCI1394_DMA_INIT=y

CONFIG_FRAME_WARN=2048

CONFIG_NODES_SHIFT=9

CONFIG_DIRECT_GBPAGES=y

CONFIG_X86_MPPARSE=y

CONFIG_I7300_IDLE=m
CONFIG_IRQ_REMAP=y

CONFIG_X86_X2APIC=y
CONFIG_SPARSE_IRQ=y

CONFIG_RCU_FANOUT=64
# CONFIG_RCU_USER_QS is not set

CONFIG_INTEL_TXT=y

# CONFIG_OF is not set

CONFIG_FUNCTION_GRAPH_TRACER=y

CONFIG_I7300_IDLE=m

# https://fedoraproject.org/wiki/Features/Checkpoint_Restore
CONFIG_CHECKPOINT_RESTORE=y

# Should be 32bit only, but lacks KConfig depends
# CONFIG_XO15_EBOOK is not set

CONFIG_THUNDERBOLT=m

CONFIG_NTB=m
CONFIG_NTB_NETDEV=m
CONFIG_NTB_AMD=m
CONFIG_NTB_INTEL=m
CONFIG_NTB_PINGPONG=m
CONFIG_NTB_PERF=m
CONFIG_NTB_TOOL=m
CONFIG_NTB_TRANSPORT=m

# 10GigE
#
CONFIG_IP1000=m
CONFIG_SFC=m
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_SFC_MTD=y
# CONFIG_SFC_MCDI_LOGGING is not set
# Override MTD stuff because SFC_MTD needs it
CONFIG_MTD_BLOCK=m

CONFIG_HSA_AMD=m

CONFIG_LIBNVDIMM=m
CONFIG_BTT=y
CONFIG_ND_BTT=m
CONFIG_ND_BLK=m

CONFIG_MDIO_OCTEON=m

CONFIG_NO_HZ_FULL=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ_FULL_ALL is not set
# CONFIG_NO_HZ_FULL_SYSIDLE is not set
# CONFIG_CONTEXT_TRACKING_FORCE is not set

# Turn on CONFIG_CMA for THP
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7

# Changes for persistent memory devices
# CONFIG_ZONE_DMA is not set
CONFIG_ZONE_DEVICE=y
CONFIG_NVDIMM_PFN=y
CONFIG_ND_PFN=m

# Staging
CONFIG_STAGING_RDMA=y
# CONFIG_INFINIBAND_AMSO1100 is not set
# CONFIG_INFINIBAND_EHCA is not set
CONFIG_INFINIBAND_HFI1=m
# CONFIG_HFI1_DEBUG_SDMA_ORDER is not set
CONFIG_HFI1_VERBS_31BIT_PSN=y
# CONFIG_SDMA_VERBOSITY is not set
# CONFIG_PRESCAN_RXQ is not set
initial srpm import 2010-07-29 23:46:31 +00:00			`CONFIG_64BIT=y`

Update configs for first 3.5 merge window git snapshot 2012-05-22 02:17:04 +00:00			`# CONFIG_X86_X32 is not set`
initial srpm import 2010-07-29 23:46:31 +00:00			`# CONFIG_MK8 is not set`
			`# CONFIG_MPSC is not set`
			`CONFIG_GENERIC_CPU=y`
Split out the 32bit only options from x86-32 Remove unnecessary duplicates, consolidate. This should reduce having to set the same option twice on 32/64. 2011-08-09 23:32:10 +00:00
initial srpm import 2010-07-29 23:46:31 +00:00			`# CONFIG_X86_VSMP is not set`
Enable SGI UV systems. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1051284 Set CONFIG_X86_UV to 'y' and CONFIG_UV_MMTIMER to 'm' for large SGI boxes. These settings will enable the booting of more than 16 processors. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: glaubitz@physik.fu-berlin.de Cc: jwboyer@redhat.com 2014-01-10 13:18:04 +00:00			`CONFIG_X86_UV=y`
			`CONFIG_UV_MMTIMER=m`
initial srpm import 2010-07-29 23:46:31 +00:00			`CONFIG_NUMA=y`
Branch for 2.6.38 - Rebase trivial patches. - Switch debug configs back on. - config changes: DEBUG_SET_MODULE_RONX=y B43_PHY_N=y RT2800USB_RT33XX=y \| RT2800PCI_RT33XX=y \| experimental WL12XX=m RTL8192CE=m CAN_SLCAN=m SCHED_AUTOGROUP=n 2011-01-10 16:05:09 +00:00			`CONFIG_AMD_NUMA=y`
initial srpm import 2010-07-29 23:46:31 +00:00			`CONFIG_X86_64_ACPI_NUMA=y`
Linux v4.1-11355-g6aaf0da8728c - Add patch to fix KVM sleeping in atomic issue (rhbz 1237143) - Fix errant with_perf disable that removed perf entirely (rhbz 1237266) 2015-06-30 17:01:28 +00:00			`CONFIG_ACPI_NFIT=m`
			`# CONFIG_ACPI_NFIT_DEBUG is not set`
initial srpm import 2010-07-29 23:46:31 +00:00			`# CONFIG_NUMA_EMU is not set`
Enable X86_NUMACHIP 2015-10-07 13:09:01 +00:00			`CONFIG_X86_NUMACHIP=y`
Linux v3.8-rc2-116-g5f243b9 2013-01-04 21:16:10 +00:00			`CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y`
			`CONFIG_NUMA_BALANCING=y`
Split out the 32bit only options from x86-32 Remove unnecessary duplicates, consolidate. This should reduce having to set the same option twice on 32/64. 2011-08-09 23:32:10 +00:00
Linux v3.12-rc7-79-g4f794ee - Set NR_CPUS=1024 on non-debug x86_64 builds (MAXSMP is set on debug) 2013-11-01 12:46:47 +00:00			`# https://lists.fedoraproject.org/pipermail/kernel/2013-November/004601.html`
			`CONFIG_NR_CPUS=1024`
Split out the 32bit only options from x86-32 Remove unnecessary duplicates, consolidate. This should reduce having to set the same option twice on 32/64. 2011-08-09 23:32:10 +00:00			`CONFIG_PHYSICAL_START=0x1000000`
Linux v3.11-3070-gcb3e433 2013-09-04 17:55:03 +00:00			`CONFIG_PHYSICAL_ALIGN=0x1000000`
Split out the 32bit only options from x86-32 Remove unnecessary duplicates, consolidate. This should reduce having to set the same option twice on 32/64. 2011-08-09 23:32:10 +00:00
Change DEFAULT_MMAP_MIN_ADDR to 64k on x86_64 2014-01-07 12:43:52 +00:00			`# https://lists.fedoraproject.org/pipermail/kernel/2013-December/004753.html`
			`CONFIG_DEFAULT_MMAP_MIN_ADDR=65536`

Enable CONFIG_EFI_MIXED. This enables the 32-bit EFI entry point on 64-bit kernels, so hardware like Baytrail devices with 32-bit firmware on a 64-bit cpu can boot the 64-bit kernel. Signed-off-by: Peter Jones <pjones@redhat.com> 2015-04-09 14:24:01 +00:00			`# enable the 32-bit entry point for Baytrail`
			`CONFIG_EFI_MIXED=y`

initial srpm import 2010-07-29 23:46:31 +00:00			`CONFIG_IA32_EMULATION=y`
			`# CONFIG_IA32_AOUT is not set`
Split out the 32bit only options from x86-32 Remove unnecessary duplicates, consolidate. This should reduce having to set the same option twice on 32/64. 2011-08-09 23:32:10 +00:00
			`CONFIG_AMD_IOMMU=y`
			`CONFIG_AMD_IOMMU_STATS=y`
Rebase to Linux 3.3-rc1 The utrace patch is left unapplied as it doesn't apply cleanly any longer 2012-01-20 18:32:57 +00:00			`CONFIG_AMD_IOMMU_V2=m`
initial srpm import 2010-07-29 23:46:31 +00:00			`# CONFIG_IOMMU_DEBUG is not set`
			`CONFIG_SWIOTLB=y`
Disable Calgary IOMMU 2012-01-13 22:22:29 +00:00			`# CONFIG_CALGARY_IOMMU is not set`
Linux v3.12-4849-g10d0c97 Replace x86-allow-1024-cpus.patch with the patch that contains the one hunk not already applied upstream. Don't install the 'trace' alias symlink for 'perf trace'. Seems much too generic to just throw that into /usr/bin 2013-11-12 18:22:52 +00:00			`# CONFIG_GART_IOMMU is not set`
initial srpm import 2010-07-29 23:46:31 +00:00
Turn off THP for 32bit 2013-01-25 16:45:19 +00:00			`CONFIG_TRANSPARENT_HUGEPAGE=y`
Switch to CONFIG_TRANSPARENT_HUGEPAGE_MADVISE instead of always on The benefit of THP has been somewhat questionable overall for a while, and it's been known to cause performance issues with some workloads. Upstream also considers it to be overly complicated and really not worth it on machines with memory in the amounts found on typical desktops/SMB servers. Switch to using it via madvise, which most applications that care about it should likely already be doing. 2014-03-27 22:31:16 +00:00			`CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y`
Enable CGROUP_HUGETLB on ppc64/ppc64p7 and x86_64 (rhbz 1031984) 2013-11-19 13:06:59 +00:00			`CONFIG_CGROUP_HUGETLB=y`
Linux v3.10-6005-gd2b4a64 2013-07-08 19:59:04 +00:00			`CONFIG_MEM_SOFT_DIRTY=y`
Turn off THP for 32bit 2013-01-25 16:45:19 +00:00
initial srpm import 2010-07-29 23:46:31 +00:00			`CONFIG_KEXEC_JUMP=y`
config: Enable kexec bzImage signature verification New kexec syscall (kexec_file_load()) can perform bzimage signature verification. This will re-enable kexec/kdump on secureboot systems using new syscall. Currently kexec/kdump is disabled on secureboot systems. User space (kexec-tools) will be modifed to automatically detect that running system has secureboot enabled and use new syscall instead of old one. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> 2014-09-03 19:46:01 +00:00			`CONFIG_KEXEC_FILE=y`
			`CONFIG_KEXEC_VERIFY_SIG=y`
			`CONFIG_KEXEC_BZIMAGE_VERIFY_SIG=y`
initial srpm import 2010-07-29 23:46:31 +00:00
Linux v3.9-8933-gce85722 - First DRM merge 2013-05-03 12:27:34 +00:00			`CONFIG_ACPI_HOTPLUG_MEMORY=y`
Update to 2.6.38-git21 2011-03-29 21:59:22 +00:00
initial srpm import 2010-07-29 23:46:31 +00:00			`# CONFIG_INTEL_SCU_IPC is not set`

Linux v4.1-11235-gc63f887bdae8 - Reenable debugging options. 2015-06-29 15:24:25 +00:00			`CONFIG_SCIF_BUS=m`
			`CONFIG_SCIF=m`

Enable INTEL_MIC drivers (rhbz 1064086) 2014-02-18 13:59:23 +00:00			`CONFIG_INTEL_MIC_HOST=m`
			`CONFIG_INTEL_MIC_CARD=m`
Linux v3.16-3652-gf19107379dbc - Reenable debugging options. 2014-08-05 10:44:35 +00:00			`CONFIG_INTEL_MIC_BUS=m`
			`CONFIG_INTEL_MIC_X100_DMA=m`
Linux v4.3-6681-g8e483ed 2015-11-05 18:48:38 +00:00			`CONFIG_MIC_COSM=m`
Linux v3.12-2839-gedae583 - Reenable debugging options. 2013-11-11 14:45:46 +00:00
initial srpm import 2010-07-29 23:46:31 +00:00			`# SHPC has half-arsed PCI probing, which makes it load on too many systems`
			`CONFIG_HOTPLUG_PCI_SHPC=m`

Linux v3.17-2860-gef0625b70dac - Reenable debugging options. - Temporarily disable aarch64patches 2014-10-08 16:10:10 +00:00			`# CONFIG_CRYPTO_SHA1_MB is not set`
snapshot 2.6.37-git12 2011-01-15 05:56:55 +00:00			`CONFIG_CRYPTO_AES_X86_64=y`
Rebase to Linux 3.3-rc1 The utrace patch is left unapplied as it doesn't apply cleanly any longer 2012-01-20 18:32:57 +00:00			`CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m`
initial srpm import 2010-07-29 23:46:31 +00:00			`CONFIG_CRYPTO_TWOFISH_X86_64=m`
			`CONFIG_CRYPTO_SALSA20_X86_64=m`
Split out the 32bit only options from x86-32 Remove unnecessary duplicates, consolidate. This should reduce having to set the same option twice on 32/64. 2011-08-09 23:32:10 +00:00			`CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m`
Linux 3.1-git4 (upstream dc47d3810cdc) 2011-11-01 19:13:32 +00:00			`CONFIG_CRYPTO_SHA1_SSSE3=m`
Linux v3.9-8933-gce85722 - First DRM merge 2013-05-03 12:27:34 +00:00			`CONFIG_CRYPTO_SHA256_SSSE3=m`
			`CONFIG_CRYPTO_SHA512_SSSE3=m`
Linux 3.1-git4 (upstream dc47d3810cdc) 2011-11-01 19:13:32 +00:00			`CONFIG_CRYPTO_BLOWFISH_X86_64=m`
			`CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m`
Update configs for first 3.5 merge window git snapshot 2012-05-22 02:17:04 +00:00			`CONFIG_CRYPTO_CAMELLIA_X86_64=m`
Linux v3.9-8933-gce85722 - First DRM merge 2013-05-03 12:27:34 +00:00			`CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m`
			`CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m`
Update config options for 3.7 - Fix module blacklist patch to not leak a reference to the blacklist keyring 2012-10-30 19:49:07 +00:00			`CONFIG_CRYPTO_CAST5_AVX_X86_64=m`
			`CONFIG_CRYPTO_CAST6_AVX_X86_64=m`
Linux v3.10-6005-gd2b4a64 2013-07-08 19:59:04 +00:00			`CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m`
Update config options 2012-07-30 23:13:04 +00:00			`CONFIG_CRYPTO_SERPENT_AVX_X86_64=m`
Linux v3.9-8933-gce85722 - First DRM merge 2013-05-03 12:27:34 +00:00			`CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m`
Update config options 2012-07-30 23:13:04 +00:00			`CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m`
Linux v3.16-3652-gf19107379dbc - Reenable debugging options. 2014-08-05 10:44:35 +00:00			`CONFIG_CRYPTO_DES3_EDE_X86_64=m`
Linux v4.2-2744-g65a99597f044 - Reenable debugging options. 2015-09-01 16:25:34 +00:00			`CONFIG_CRYPTO_POLY1305_X86_64=m`
			`CONFIG_CRYPTO_CHACHA20_X86_64=m`
Linux v3.15-7218-g3f17ea6dea8b - Reenable debugging options. 2014-06-11 17:36:24 +00:00			`# staging crypto`
			`# CONFIG_CRYPTO_SKEIN is not set`
initial srpm import 2010-07-29 23:46:31 +00:00
			`# CONFIG_I2C_ALI1535 is not set`
			`# CONFIG_I2C_ALI1563 is not set`
			`# CONFIG_I2C_ALI15X3 is not set`
			`# CONFIG_I2C_SIS5595 is not set`
			`# CONFIG_I2C_SIS630 is not set`

			`CONFIG_EDAC_AMD64=m`
			`# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set`
Linux 3.1-git6 (upstream 1a67a573b8d) Make CONFIG_EDAC_SBRIDGE only build on x86_64 since it has 64-bit divide errors on 32-bit kernels. 2011-11-04 12:26:47 +00:00			`CONFIG_EDAC_SBRIDGE=m`
initial srpm import 2010-07-29 23:46:31 +00:00
			`# CONFIG_PC8736x_GPIO is not set`

			`# CONFIG_DISCONTIGMEM_MANUAL is not set`
			`CONFIG_SPARSEMEM_MANUAL=y`
			`CONFIG_SPARSEMEM=y`
			`CONFIG_HAVE_MEMORY_PRESENT=y`
			`CONFIG_SPARSEMEM_EXTREME=y`
			`CONFIG_SPARSEMEM_VMEMMAP=y`
Linux v3.8-rc2-116-g5f243b9 2013-01-04 21:16:10 +00:00			`# CONFIG_MOVABLE_NODE is not set`
Reenable MEMORY_HOTPLUG on x86_64 2013-12-18 16:58:16 +00:00			`CONFIG_MEMORY_HOTPLUG=y`
			`# CONFIG_ARCH_MEMORY_PROBE is not set`
Linux v4.4-10454-g3e1e21c 2016-01-22 19:23:22 +00:00			`CONFIG_MEMORY_HOTREMOVE=y`
Linux v4.2-rc1 - Disable debug options. - Add patch to fix perf build 2015-07-06 20:34:35 +00:00			`# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set`
initial srpm import 2010-07-29 23:46:31 +00:00
			`# CONFIG_BLK_DEV_CMD640 is not set`
			`# CONFIG_BLK_DEV_RZ1000 is not set`
			`# CONFIG_BLK_DEV_TRIFLEX is not set`
			`# CONFIG_BLK_DEV_CS5520 is not set`
			`# CONFIG_BLK_DEV_CS5530 is not set`
			`# CONFIG_BLK_DEV_CS5535 is not set`

			`CONFIG_SGI_IOC4=m`
			`CONFIG_SGI_XP=m`
			`CONFIG_SGI_GRU=m`
			`# CONFIG_SGI_GRU_DEBUG is not set`

			`# CONFIG_VIDEO_CAFE_CCIC is not set`

Linux 3.1-git7 (upstream 31555213f) 2011-11-07 16:25:51 +00:00			`CONFIG_XEN_MAX_DOMAIN_MEMORY=128`
Disable Xen balloon memory hotplug support (rhbz 744408) 2011-10-11 12:45:11 +00:00			`# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set`
initial srpm import 2010-07-29 23:46:31 +00:00			`CONFIG_XEN_DEV_EVTCHN=m`
			`CONFIG_XEN_SYS_HYPERVISOR=y`
Update config options 2012-07-30 23:13:04 +00:00			`# CONFIG_XEN_MCE_LOG is not set`
Linux v3.8-7888-gab78265 2013-02-25 13:33:59 +00:00			`# CONFIG_XEN_STUB is not set`
Enable XEN_PVN support (rhbz 1211904) 2015-12-17 19:00:19 +00:00			`CONFIG_XEN_PVH=y`
Linux v4.2-10637-ga794b4f32921 - Rework secure boot patchset 2015-09-09 15:10:06 +00:00			`CONFIG_XEN_512GB=y`
initial srpm import 2010-07-29 23:46:31 +00:00
Split out the 32bit only options from x86-32 Remove unnecessary duplicates, consolidate. This should reduce having to set the same option twice on 32/64. 2011-08-09 23:32:10 +00:00			`CONFIG_PROVIDE_OHCI1394_DMA_INIT=y`
initial srpm import 2010-07-29 23:46:31 +00:00
			`CONFIG_FRAME_WARN=2048`

			`CONFIG_NODES_SHIFT=9`

			`CONFIG_DIRECT_GBPAGES=y`

			`CONFIG_X86_MPPARSE=y`

			`CONFIG_I7300_IDLE=m`
Linux 3.1-git1 (138c4ae9cfda upstream) First take on the upcomming Linux 3.2 kernel. The moving of the ethernet drivers into vendor subdirectories caused a lot of churn in config-generic, but hopefully it's a bit cleaner now. 2011-10-26 22:23:52 +00:00			`CONFIG_IRQ_REMAP=y`
initial srpm import 2010-07-29 23:46:31 +00:00
			`CONFIG_X86_X2APIC=y`
			`CONFIG_SPARSE_IRQ=y`

			`CONFIG_RCU_FANOUT=64`
Update config options for 3.7 - Fix module blacklist patch to not leak a reference to the blacklist keyring 2012-10-30 19:49:07 +00:00			`# CONFIG_RCU_USER_QS is not set`
initial srpm import 2010-07-29 23:46:31 +00:00
			`CONFIG_INTEL_TXT=y`
Split out the 32bit only options from x86-32 Remove unnecessary duplicates, consolidate. This should reduce having to set the same option twice on 32/64. 2011-08-09 23:32:10 +00:00
Linux v4.2-rc1 - Disable debug options. - Add patch to fix perf build 2015-07-06 20:34:35 +00:00			`# CONFIG_OF is not set`
initial srpm import 2010-07-29 23:46:31 +00:00
			`CONFIG_FUNCTION_GRAPH_TRACER=y`

			`CONFIG_I7300_IDLE=m`

Linux v3.8-rc5-218-ga56e160 - Enable NAMESPACES and CHECKPOINT_RESTORE on x86_64 for F19 CRIU feature - Enable CONFIG_DEBUG_ATOMIC_SLEEP 2013-01-30 15:55:31 +00:00			`# https://fedoraproject.org/wiki/Features/Checkpoint_Restore`
			`CONFIG_CHECKPOINT_RESTORE=y`

Split out the 32bit only options from x86-32 Remove unnecessary duplicates, consolidate. This should reduce having to set the same option twice on 32/64. 2011-08-09 23:32:10 +00:00			`# Should be 32bit only, but lacks KConfig depends`
			`# CONFIG_XO15_EBOOK is not set`
3.0-git3 snapshot Testing that this part of the spec still works... Hopefully the next release is indeed 3.1.0... 2011-07-25 02:26:26 +00:00
Linux v3.16-3652-gf19107379dbc - Reenable debugging options. 2014-08-05 10:44:35 +00:00			`CONFIG_THUNDERBOLT=m`

Linux v3.8-6071-g8b5628a - Enable the rtl8192e driver (rhbz 913753) 2013-02-22 13:39:21 +00:00			`CONFIG_NTB=m`
			`CONFIG_NTB_NETDEV=m`
Linux v4.5-rc1 2016-01-25 16:59:05 +00:00			`CONFIG_NTB_AMD=m`
Linux v4.2-rc1 - Disable debug options. - Add patch to fix perf build 2015-07-06 20:34:35 +00:00			`CONFIG_NTB_INTEL=m`
			`CONFIG_NTB_PINGPONG=m`
Linux v4.5-rc1 2016-01-25 16:59:05 +00:00			`CONFIG_NTB_PERF=m`
Linux v4.2-rc1 - Disable debug options. - Add patch to fix perf build 2015-07-06 20:34:35 +00:00			`CONFIG_NTB_TOOL=m`
			`CONFIG_NTB_TRANSPORT=m`
Enable MTD_CHAR/MTD_BLOCK (Needed for SFC) Enable 10gigE on 64-bit only. 2013-04-03 18:31:59 +00:00
			`# 10GigE`
			`#`
			`CONFIG_IP1000=m`
			`CONFIG_SFC=m`
			`CONFIG_SFC_MCDI_MON=y`
			`CONFIG_SFC_SRIOV=y`
			`CONFIG_SFC_MTD=y`
Linux v4.1-5596-gaefbef10e3ae 2015-06-26 13:33:38 +00:00			`# CONFIG_SFC_MCDI_LOGGING is not set`
Enable MTD_CHAR/MTD_BLOCK (Needed for SFC) Enable 10gigE on 64-bit only. 2013-04-03 18:31:59 +00:00			`# Override MTD stuff because SFC_MTD needs it`
			`CONFIG_MTD_BLOCK=m`

Linux v3.19-rc2 - Temporarily disable aarch64patches - Happy New Year 2015-01-05 21:09:49 +00:00			`CONFIG_HSA_AMD=m`

Linux v4.1-11355-g6aaf0da8728c - Add patch to fix KVM sleeping in atomic issue (rhbz 1237143) - Fix errant with_perf disable that removed perf entirely (rhbz 1237266) 2015-06-30 17:01:28 +00:00			`CONFIG_LIBNVDIMM=m`
			`CONFIG_BTT=y`
			`CONFIG_ND_BTT=m`
			`CONFIG_ND_BLK=m`

Linux v4.2-6105-gdd5cdb48edfd - Networking merge 2015-09-03 20:00:15 +00:00			`CONFIG_MDIO_OCTEON=m`

re-enable RCU_FAST_NO_HZ, enable NO_HZ_FULL on x86_64 - I also like to live dangerously. (Re-enable RCU_FAST_NO_HZ which has been off since April 2012. Also enable NO_HZ_FULL on x86_64.) - I added zipped modules ages ago, remove it from TODO. 2014-09-17 18:10:12 +00:00			`CONFIG_NO_HZ_FULL=y`
			`# CONFIG_NO_HZ_IDLE is not set`
Disable NO_HZ_FULL again - Enable early microcode loading (rhbz 1083716) 2014-09-19 18:40:35 +00:00			`# CONFIG_NO_HZ_FULL_ALL is not set`
re-enable RCU_FAST_NO_HZ, enable NO_HZ_FULL on x86_64 - I also like to live dangerously. (Re-enable RCU_FAST_NO_HZ which has been off since April 2012. Also enable NO_HZ_FULL on x86_64.) - I added zipped modules ages ago, remove it from TODO. 2014-09-17 18:10:12 +00:00			`# CONFIG_NO_HZ_FULL_SYSIDLE is not set`
			`# CONFIG_CONTEXT_TRACKING_FORCE is not set`
Enable CONFIG_CMA on x86_64 (rhbz 1278985) 2015-11-10 18:17:55 +00:00
			`# Turn on CONFIG_CMA for THP`
			`CONFIG_CMA=y`
			`# CONFIG_CMA_DEBUG is not set`
			`# CONFIG_CMA_DEBUGFS is not set`
			`CONFIG_CMA_AREAS=7`
Linux v4.4-10454-g3e1e21c 2016-01-22 19:23:22 +00:00
			`# Changes for persistent memory devices`
			`# CONFIG_ZONE_DMA is not set`
			`CONFIG_ZONE_DEVICE=y`
			`CONFIG_NVDIMM_PFN=y`
			`CONFIG_ND_PFN=m`
Linux v4.5-rc1-28-g03c21cb 2016-01-28 17:59:39 +00:00
			`# Staging`
			`CONFIG_STAGING_RDMA=y`
			`# CONFIG_INFINIBAND_AMSO1100 is not set`
			`# CONFIG_INFINIBAND_EHCA is not set`
			`CONFIG_INFINIBAND_HFI1=m`
			`# CONFIG_HFI1_DEBUG_SDMA_ORDER is not set`
			`CONFIG_HFI1_VERBS_31BIT_PSN=y`
			`# CONFIG_SDMA_VERBOSITY is not set`
			`# CONFIG_PRESCAN_RXQ is not set`