If the configuration sets keytab path and principal, run kinit with
custom cache file, and delete the file at the end of the run.
JIRA: COMPOSE-3288
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If a repo or install tree is specified as an absolute path on the local
filesystem, we should either translate it using the configured mappings,
or if no mapping matches, it should be return unchanged. A variant name
can not start with a slash, so attempting that translation does not make
much sense.
JIRA: COMPOSE-3290
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The default is the original behaviour. On F30+ a new option should be
added to config to make it work.
Over time as users move to this option (which requires a new enough
version of lorax), the default should be switched and then the option
removed.
Resolves: https://pagure.io/pungi/issue/1126
Merges: https://pagure.io/pungi/pull-request/1128
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch allows the configuration to express maximum expected size for
ISOs created in createiso and extra_isos phases. If the image is larger
than this limit, a warning is emitted in test phase. The compose itself
is not affected in any way.
JIRA: COMPOSE-2824
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch does not do any actual pushing. It will only extract data
about push targets from the main configuration and store it together
with exact Koji NVR in a well-defined location, and also send the data
to message bus for another service to handle.
JIRA: COMPOSE-3228
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It may make sense to break a big compose into smaller chunks that can be
done independently. This script allows describing the smaller parts,
runs them with correct dependencies and arranges the result to look like
a single big compose.
All parts use the same koji event, that is either obtained from Koji, or
from command line argument.
JIRA: COMPOSE-2654
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We already make this possible for the ostree installer, but it was
missing from the traditional one. The default behaviour is to let lorax
decide, but if user knows better, they can overwrite in configuration.
JIRA: COMPOSE-3188
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Add more details to the documentation for the product_id_allow_missing
setting:
- Pungi expects a product cert for each arch in each variant.
- Pungi will exit with an error by default if a variant+arch's cert is
missing.
- Pungi will log a warning if product_id_allow_missing is True.
Merges: https://pagure.io/pungi/pull-request/1102
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
Document the "productid" files that Pungi creates when the user
configures the "product_id" setting. Describe where to find the
"productid" files, and how they relate to subscription-manager.
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
They are not always wanted, so let's not include them by default.
There's a new option to include the same files that extra files phases
uses, or alternatively they can be configured specifically and put into
the variant subdirectory.
JIRA: COMPOSE-3084
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Up to now it was possible to change the pattern for all images, but
there are use-cases where different variants might want different names.
For example there could be one main variant that should only have
product name in the ISO filename, but addons should still be marked with
variant name.
JIRA: COMPOSE-3041
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This PR adds new pkgset_koji_builds configuration option.
This option allows setting list of extra Koji build NVRs which will be
included in a compose. This is useful in two cases:
a) It allows generating standard composes with few packages update to
certain version to test how the compose behaves when the package is
updated for real.
b) It allows generating compose consisting only from particular builds
when pkgset_koji_tag = '' or None. This is useful when one want to
regenerate the compose with packages which are not tagged in single Koji
tag. This is very useful for ODCS when reproducing old composes.
Merges: https://pagure.io/pungi/pull-request/1049
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
This patch changes the behaviour when both module tag and NSV?C? is
specified. The NSVC are used as a whitelist and only matching modules
will be included in the compose.
Additionally this patch adds filtering based on inheritance: when
finding the latest module for each N:S combination, only the top tag in
which the module is tagged is used. Even if a newer build is available
somewhere deeper in the inheritance, it's not going to be used.
Example inheritance and tagged modules
f29-compose (foo:1:2018:cafe)
└─ f29-candidate (foo:1:2019:cafe)
The compose will use 2018 version, because it's in the topmost tag.
JIRA: COMPOSE-2685
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the same tag is queried with the same event, Pungi can cache the
response and call the API again. Particularly for small composes this
can save up significant amount of time.
Merges: https://pagure.io/pungi/pull-request/1022
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
This is used in multiple places, but not defined anywhere.
Fixes: https://pagure.io/pungi/issue/1028
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This could be used to enable zchunk generation, which can require up to
4 different options. Instead of hardcoding every single one, let's just
allow more direct access to the executed command.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch adds a new gather method called `hybrid`, which uses a `fus`
binary, which must exist somewhere on the `$PATH`. It will call it
multiple times to add multilib packages.
The solver can handle packages, modules and comps groups as input.
However comps groups are never passed in. Pungi will expand it to a list
of packages to avoid issues with comps handling in fus. It ignores
optional packages, and if the group mentions a package that does not
exist, nothing else from the group is included.
Multilib is also handled outside of fus. Pungi will run it, parse the
packages from output, determines multilib packages and adds them as
input. Then it runs the solver again. This is done until nothing new is
added. Usually two passes should be enough.
Source packages and debuginfo are added as a final step. All debuginfo
packages from any included source are added. If the source or debuginfo
package is included in any lookaside repo, it will be skipped.
The tool expects to get a platform stream that should be provided for
modules to depend on. Pungi looks into the modules and gets the platform
from there. If there are more requests, an error is raised.
There is some missing functionality and options that are ignored.
Particularly these are:
* gather_fulltree
* gather_selfhosting
* greedy_method
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We can specify !VERSION_FROM_VERSION in version field during
image_build to expand it to correct release number without any label
information.
Also implemented !RELEASE_FROM_DATE_RESPIN to provide correct
release number. This helps to keep Atomic Host media files name
produced by image_build during bodhi updates compose run
consistent with nightly run.
Fixes: https://pagure.io/pungi/issue/987
Merges: https://pagure.io/pungi/pull-request/995
Signed-off-by: Sinny Kumari <sinny@redhat.com>
If a file has multiple hard links, genisoimage will put the wrong number
on the ISO. This patch can work around it by copying hard-linked files
into a temporary staging directory.
JIRA: COMPOSE-2610
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
PDC is deprecated in upstream. The usecase for getting list of modules
by NS, NSV or NSVC can however be satisfied by querying modules imported
into Koji.
This makes it possible to deprecate PDC configuration.
Merges: https://pagure.io/pungi/pull-request/985
Signed-off-by: Martin Curlej <mcurlej@redhat.com>
* Koji can now be installed from PyPI and it will also pull in rpm. This
needs rpm-devel install on the system. This means we can get kobo from
PyPI as well.
* Using print function should make it work for python 3 virtualenvs.
* Newer we need kobo in 0.6.0 at least, but newer is fine too.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The `add_noarch` option of `get_valid_arches` is broken and doesn't
really do anything (noarch is always present in the result).
This causes packages that have ExclusiveArch including noarch to
actually not be excluded. They should be.
Changing this globally could have a very big impact. Therefore we can
hide it behind a configuration option so that it's opt-in.
JIRA: COMPOSE-2457
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is an optimization for Yum. DNF does not care at all.
The behaviour is configurable, but the default depends on gather
backend, as that is what users should be using to consume the packages
from the repo.
Fixes: https://pagure.io/pungi/issue/951
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
With one compose combining traditional and modular content there might
be different requirements for tag inheritance. This patch adds a new
option that controls whether builds in modular tags should be inherited.
It defaults to False, which is the right option for current MBS
behavior.
JIRA: COMPOSE-2148
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
- Add rpmdevtools and python-unittest2 to the list of packages
required to set up a testing environment
Signed-off-by: Robert Marshall <rmarshall@redhat.com>
A new configuration option is added that allows users to point lorax to
extra repositories. This can be handy if some tools to create the
bootable image are not part of the product itself.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
JIRA: COMPOSE-2253
With this patch the gather_source option is no longer used. Instead, all
sources are always used. If they return at least some input packages,
then a configured method is used and the returned lists of packages from
all sources are merged.
The method used for gathering can be configured for each variant and
gather source separately.
Additional packages are only added to the comps source.
Each gathering step is logged separately. All the logs are preserved for
later inspection.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There are valid use cases for not specifying this option: specifically a
modular compose will get the tags to use from modules listed in the
variants file.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Followup from discussion in: https://pagure.io/pungi/issue/811
It's likely now that for Fedora Atomic Host we'll use this, to work
around other issues, after we fix the FAW change detection.
Signed-off-by: Colin Walters <walters@verbum.org>
The "Phases" section breaks down what Pungi does in detail. Place it
towards the top of the documentation table of contents.
The "Contributing" and "Testing" sections are relevant to developers,
not all users, so move them to the end.
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
It allows specify what ref we want this compose to commit to.
New parameter 'ostree_ref' overrides the default value from the treefile json.
Relates: https://pagure.io/pungi/issue/777
Signed-off-by: Ondrej Nosek <onosek@redhat.com>
A new `buildinstall_topdir` option allows using buildinstall even when
the compose is created on a different volume that Koji is using.
The files are created in this external directory and then copies into
the usual location.
Merges: https://pagure.io/pungi/pull-request/807
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
List all available configuration options and go into some detail on how
modules should be specified. This would probably deserver a more
thorough explanation, but it's still bit in a flux.
Fixes: https://pagure.io/pungi/issue/767
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Options that are currently marked as deprecated do not have any effect
anymore (other than printing warning). We should remove them and update
the message so that we can mark options as deprecated even when they
still work.
Signed-off-by: Ondrej Nosek <onosek@redhat.com>
The file extension in configuration is only used to tell Pungi which
files from the task results should be downloaded. The user has to get it
right or the phase will fail. Each format has a single valid suffix.
Pungi should not require users to specify the suffix, since it can just
as well just know the right value.
The old configuration will continue working, only the extension will be
ignored.
Fixes: https://pagure.io/pungi/issue/753
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
To be more precise, new createrepo parameter "workers" was customized and
new default value was set. This fixes issue #752.
Signed-off-by: Ondrej Nosek <onosek@redhat.com>
Let's not duplicate the list. Productmd exports a list of valid values,
so Pungi should just pick and use that.
Closes: https://pagure.io/pungi/pull-request/773
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This would be useful for modularity. The templates can be added now and
variables set via the existing `lorax_option`.
It's not possible to use custom templates not shipped with lorax, as
passing the path to a random directory is a little bit more tricky.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Currently `None` has to be included to allow using unsigned packages.
ODCS has trouble with including non-string value in the list though, so
we can treat empty string the same way (it's not a valid key ID anyway).
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of the old default value and custom handling introduce new
option `live_images_target` (for consistency with other phases) and use
the usual inheritance rules.
Fixes: https://pagure.io/pungi/issue/749
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It's really just an RPM name, not any random provide or source package
name.
Fixes: https://pagure.io/pungi/issue/725
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
`pungi-gather` (the tool that underlies both the `pkgset` and `gather`
phases) contains profiling code that will log statistics about how long
different function calls take. However, pungi-koji did not contain a
way to pass the ``--profiler`` argument to enable this.
This change adds a new configuration option ``gather_profiler`` which,
when set to true, simply passes the argument to `pungi-koji`. Hopefully
this can help shed some light on what is happening in some of our
longer-running composes.
Merges: https://pagure.io/pungi/pull-request/727
Signed-off-by: Ralph Bean <rbean@redhat.com>
The configuration needs to be more granular than a single global option.
With this patch each tree can enable deltas separately.
Fixes: https://pagure.io/pungi/issue/715
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The config can change the default compose type. This can still be
overwritten by a CLI argument. A `--production` option is now added to
CLI (because that was the default before).
Fixes: https://pagure.io/pungi/issue/694
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It makes no sense to repeat the same configuration for multiple
architectures. Instead we should just list the architectures as another
key in the mapping. There is an option to specify multiple config dicts.
This preserves full backwards compatibility, the old config format is
still accepted.
Fixes: https://pagure.io/pungi/issue/678
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When a package mentioned in comps is not available in the package set,
print a warning about this. Additionally there is a config option that
allows to turn this warning into a fatal error.
Fixes: https://pagure.io/pungi/issue/50
Fixes: https://pagure.io/pungi/issue/683
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Alternatively the call to repoclosure can be turned off. This is
customizable per variant and architecture.
Fixes: https://pagure.io/pungi/issue/676
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The rpmUtils module is provided yum-utils package, which is only
available for Python 2. There is no replacement for the functionality in
DNF.
There is a proposal to add this functionality to rpm itself, but it's
not really moving forward very much:
https://bugzilla.redhat.com/show_bug.cgi?id=1072972
As a short term solution let's copy the needed parts of rpmUtils.arch
module directly to pungi code base.
Fixes: https://pagure.io/pungi/issue/533
Signed-off-by: Qixiang Wan <qwan@redhat.com>
In order to avoid conflicting tags, OSBS allows only one build for a
repo/branch pair at the same time. To avoid race conditions, we should
make sure we always pass in the branch. This commit makes it a required
option.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of adding a new config option, we can just reuse the existing
`media_checksums` value. If the value is good for image checksums, it
should work for extra files as well.
Relates: #591
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The config now uses similar logic what previous commit did for OSTree.
Also we should report error when an unknown generator is used.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Config option 'repo' and 'repo_from' are used in several phases, merge
them with one option 'repo'. 'append' in schema is used for appending
the values from deprecated options to 'repo', so it won't break on any
existing config files that have the old options of 'repo_from' and
'source_repo_from' (which is an alias of 'repo_from').
And 'repo' schema is updated to support repo dict as the value or an
item in the values, a repo dict is just a dict contains repo options,
'baseurl' is required in the dict, like:
{"baseurl": "http://example.com/url/to/repo"}
or:
{"baseurl": "Serer"}
currently this is used in ostree phase to support extra repo options
like:
{"baseurl": "Server", "exclude": "systemd-container"}
Signed-off-by: Qixiang Wan <qwan@redhat.com>
Calling it gather_backend is similar to repoclosure_backend we already
have. It's also more obvious what it does.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We also rename the old multilib module used by dnf code to multilib_yum
to make it clear what is imported where.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
They are not generated as we don't actually document code. The search
page is removed as well (because it does not seem to work).
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Fixes: #462
live_images: additional_repos -> repo
ostree: source_repo_from -> repo_from
extra_source_repos -> repo
ostree_installer: source_repo_from -> repo_from
With the change, the phases have consolidate option names for variant
repos and external repos.
Old option names will continue to work, old names will be converted
to new names after validation automatically if new options are not
specified in config.
Signed-off-by: Qixiang Wan <qwan@redhat.com>
For different cases where runroot is used it's now possible to set
custom weight. The usecase for this is to avoid one builder taking too
many tasks. Especially buildinstall is quite resource intensive, so one
builder taking multiple tasks at the same time leads to very slow
compose time.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
In order to do something meaningful, the class needs to be instantiated
with arguments pointing the blacklist and whitelist.
The `file` multilib method used via `pungi-koji` or `pungi` directly has
no way to pass those in.
The only way this class can be useful would be if someone actually
imported the class directly in their own code. Pungi is not meant to be
used as a library though, so this is not really a supported use case.
Not to mention that the `select` method always returned `False`.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This adds a new option repoclosure_backend that changes what tool is
used for repoclosure.
Checking build dependencies is currently not supported, as `dnf` does
not have the corresponding option.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If gpgkey option is defined in config, set gpgcheck=1 and set
gpgkey=<value> in variant repo files.
Fixes: #487
Signed-off-by: Qixiang Wan <qwan@redhat.com>
Add new key 'repo' to allow specifying multiple repos as the source
repositories. And change 'source_repo_from' to allow specifying multiple
vairant names to use variant repos as source repositories.
Doc of 'source_repo_from' is updated to not mention URL is supported,
though we still support that in code. User should add url of repos in
'repo' key instead of 'source_repo_from'.
Fixes: #508
Signed-off-by: Qixiang Wan <qwan@redhat.com>
The same way live_media and image_build accept additional external repos
or variants list, there is now a `repo` and `repo_from` configuration
key to add these.
Fixes: #486
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Also remove the TODO comment from live images phase: the appliances are
already submitted one task per single arch, so this change is not
necessary.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The internal flag in productmd is meant to indicate that a compose is
not meant for publishing. This is potentially useful to allow filtering
in PDC or similar service.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Sometimes addtional repos are required to get necessary packages for
composing OSTree repository. For example, RHEL doesn't have an 'Everyting'
variant, so composing OSTree repository from any of the RHEL variants
won't work, addtional source repos need to be enabled to achieve that.
The new option "extra_source_repos" enable the ability of allowing extra
source repos.
And a new option 'keep_original_sources' is introduced to keep the
original repos found in tree config file, if this is enabled, Pungi
will not remove the existing source repos from the tree config file,
just add new repos of "source_repo_from" + "extra_source_repos" to
the existing repos.
Signed-off-by: Qixiang Wan <qwan@redhat.com>
Added new option '--version' to pungi-make-ostree, and this can be
enabled in ostree settings with 'version'. The version string will be
added as versioning metadata if this is specified.
Signed-off-by: Qixiang Wan <qwan@redhat.com>
Added new option '--update-summary' to pungi-make-ostree, and this can
be enabled in ostree settings with 'update_summary'. A summary file will
be generated (or re-generated if it was presented in an existing ostree
repo) when it is enabled.
Signed-off-by: Qixiang Wan <qwan@redhat.com>
This is tricky as this early in the process we don't know the compose
ID. The new message gives the full command line that was called.
Relates: #439
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of overloading the `dvd` value, use new value `ostree` that can
be overridden by a config change.
Fixes: https://pagure.io/pungi/issue/418
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The same information can be inferred from definitions in variants.xml:
if the variant has no groups defined, we include packages from all
groups. By the same logic we can also include all groups in the comps
file.
The config validation is updated to give a hint on how to remove the
option from the configuration.
Relates: #29
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>