forked from rpms/kernel
be5a330c20
* Tue Nov 29 2022 Frantisek Hrbata <fhrbata@redhat.com> [5.14.0-203.el9] - udp: Update reuse->has_conns under reuseport_lock. (Xin Long) [2135958] - udp: Remove redundant __udp_sysctl_init() call from udp_init(). (Xin Long) [2135958] - udp: Fix a data-race around sysctl_udp_l3mdev_accept. (Xin Long) [2135958] - udplite: remove udplite_csum_outgoing() (Xin Long) [2135958] - udp: remove inner_udp_hdr() (Xin Long) [2135958] - net: udp: fix alignment problem in udp4_seq_show() (Xin Long) [2135958] - x86/insn: Add AVX512-FP16 instructions to the x86 instruction decoder (Michael Petlan) [2140492] - x86/insn: Add misc instructions to x86 instruction decoder (Michael Petlan) [2140492] - x86/insn: Add AMX instructions to the x86 instruction decoder (Michael Petlan) [2140492] - powerpc/64/kdump: Limit kdump base to 512MB (Mamatha Inamdar) [2127026] - net: wrap the wireless pointers in struct net_device in an ifdef (Íñigo Huguet) [2143376] - s390/pci: add missing EX_TABLE entries to __pcistg_mio_inuser()/__pcilg_mio_inuser() (Tobias Huschle) [2141962] - s390/futex: add missing EX_TABLE entry to __futex_atomic_op() (Tobias Huschle) [2141962] - s390/uaccess: add missing EX_TABLE entries to __clear_user() (Tobias Huschle) [2141962] - s390/boot: add secure boot trailer (Tobias Huschle) [2141966] - intel_idle: Add AlderLake-N support (David Arcari) [2144693] - ipv6: Use ipv6_only_sock() helper in condition. (Ivan Vecera) [2144847] - ipv6: Remove __ipv6_only_sock(). (Ivan Vecera) [2144847] - powerpc/fadump: print start of preserved area (Mamatha Inamdar) [2108291] - powerpc/fadump: align destination address to pagesize (Mamatha Inamdar) [2108291] - powerpc/fadump: fix PT_LOAD segment for boot memory area (Mamatha Inamdar) [2108291] - ethtool: add header/data split indication (Josef Oskera) [2141648] - thermal/core: Add missing EXPORT_SYMBOL_GPL (Al Stone) [2071849] - thermal: Drop obsolete dependency on COMPILE_TEST (Al Stone) [2071849] - thermal: sysfs: Fix cooling_device_stats_setup() error code path (Al Stone) [2071849] - thermal/of: Initialize trip points separately (Al Stone) [2071849] - thermal/of: Use thermal trips stored in the thermal zone (Al Stone) [2071849] - thermal/core: Add thermal_trip in thermal_zone (Al Stone) [2071849] - thermal/core: Rename 'trips' to 'num_trips' (Al Stone) [2071849] - thermal/core: Move thermal_set_delay_jiffies to static (Al Stone) [2071849] - thermal/core: Remove unneeded EXPORT_SYMBOLS (Al Stone) [2071849] - thermal/of: Move thermal_trip structure to thermal.h (Al Stone) [2071849] - thermal/of: Remove the device node pointer for thermal_trip (Al Stone) [2071849] - thermal/of: Replace device node match with device node search (Al Stone) [2071849] - thermal/core: Remove duplicate information when an error occurs (Al Stone) [2071849] - thermal/core: Avoid calling ->get_trip_temp() unnecessarily (Al Stone) [2071849] - thermal/core: Remove DROP_FULL and RAISE_FULL (Al Stone) [2071849] - thermal/core: Use clamp() helper in the stepwise governor (Al Stone) [2071849] - thermal/drivers/tegra: Remove get_trend function (Al Stone) [2071849] - drivers/thermal/devfreq_cooling: Extend the devfreq_cooling_device with ops (Al Stone) [2071849] - drivers/thermal/cpufreq_cooling: Update outdated comments (Al Stone) [2071849] - drivers/thermal/cpufreq_cooling : Refactor thermal_power_cpu_get_power tracing (Al Stone) [2071849] - drivers/thermal/cpufreq_cooling: Use private callback ops for each cooling device (Al Stone) [2071849] - PM: EM: convert power field to micro-Watts precision and align drivers (Al Stone) [2071849] - PM: EM: Use the new .get_cost() callback while registering EM (Al Stone) [2071849] - PM: EM: Decrement policy counter (Al Stone) [2071849] - PM: EM: Mark inefficiencies in CPUFreq (Al Stone) [2071849] - PM: EM: Remove old debugfs files and print all 'flags' (Al Stone) [2071849] - thermal: Directly use ida_alloc()/free() (Al Stone) [2071849] - thermal/drivers/thermal_hwmon: Use hwmon_device_register_for_thermal() (Al Stone) [2071849] - hwmon: Introduce hwmon_device_register_for_thermal (Al Stone) [2071849] - thermal: k3_j72xx_bandgap: Add the bandgap driver support (Al Stone) [2071849] - thermal/drivers/imx_sc_thermal: Fix refcount leak in imx_sc_thermal_probe (Al Stone) [2071849] - thermal/core: Fix memory leak in __thermal_cooling_device_register() (Al Stone) [2071849] - thermal: thermal_of: fix typo on __thermal_bind_params (Al Stone) [2071849] - thermal/drivers/thermal_of: Add change_mode ops support for thermal_of sensor (Al Stone) [2071849] - thermal/governor: Remove deprecated information (Al Stone) [2071849] - thermal: devfreq_cooling: use local ops instead of global ops (Al Stone) [2071849] - thermal: cooling: Check Energy Model type in cpufreq_cooling and devfreq_cooling (Al Stone) [2071849] - thermal: tegra-bpmp: Handle errors in BPMP response (Al Stone) [2071849] - thermal: core: Fix TZ_GET_TRIP NULL pointer dereference (Al Stone) [2071849] - thermal/drivers/imx8mm: Enable ADC when enabling monitor (Al Stone) [2071849] - thermal/drivers: Add TSU driver for RZ/G2L (Al Stone) [2071849] - thermal/drivers/imx: Implement runtime PM support (Al Stone) [2071849] - thermal: core: Reset previous low and high trip during thermal zone init (Al Stone) [2071849] - thermal: Replace pr_warn() with pr_warn_once() in user_space_bind() (Al Stone) [2071849] - thermal: Fix NULL pointer dereferences in of_thermal_ functions (Al Stone) [2071849] - thermal/core: Make the userspace governor deprecated (Al Stone) [2071849] - thermal/core: fix a UAF bug in __thermal_cooling_device_register() (Al Stone) [2071849] - thermal/core: Fix null pointer dereference in thermal_release() (Al Stone) [2071849] - thermal/drivers/netlink: Add the temperature when crossing a trip point (Al Stone) [2071849] - thermal/drivers/thermal_mmio: Constify static struct thermal_mmio_ops (Al Stone) [2071849] - thermal/drivers/devfreq_cooling: use HZ macros (Al Stone) [2071849] - thermal/drivers/tegra-soctherm: Silence message about clamped temperature (Al Stone) [2071849] - thermal: Spelling s/scallbacks/callbacks/ (Al Stone) [2071849] - thermal/core: Fix thermal_cooling_device_register() prototype (Al Stone) [2071849] - thermal/drivers/tegra: Correct compile-testing of drivers (Al Stone) [2071849] - thermal/drivers/tegra: Add driver for Tegra30 thermal sensor (Al Stone) [2071849] - Revert "powerpc/rtas: Implement reentrant rtas call" (Mamatha Inamdar) [2129156] - arm64: dts: imx93: correct gpio-ranges (Steve Best) [2137947] - arm64: dts: imx93: correct s4mu interrupt names (Steve Best) [2137947] - arm64: dts: imx93: add mediamix blk ctrl node (Steve Best) [2137947] - arm64: dts: imx93: add src node (Steve Best) [2137947] - arm64: dts: imx93: add lpspi nodes (Steve Best) [2137947] - arm64: dts: imx93: add lpi2c nodes (Steve Best) [2137947] - arm64: dts: imx93: add a55 pmu (Steve Best) [2137947] - arm64: dts: imx93: add blk ctrl node (Steve Best) [2137947] - arm64: dts: imx93: add s4 mu node (Steve Best) [2137947] - arm64: dts: imx93: add gpio clk (Steve Best) [2137947] - arm64: dts: imx93: correct SDHC clk entry (Steve Best) [2137947] - arm64: defconfig: enable i.MX93 clk & pinctrl (Steve Best) [2137947] - dt-bindings: arm: fsl: add imx93 11x11 evk board (Steve Best) [2137947] - arm64: dts: freescale: add i.MX93 11x11 EVK basic support (Steve Best) [2137947] - arm64: dts: freescale: Add i.MX93 dtsi support (Steve Best) [2137947] - powerpc: Don't select HAVE_IRQ_EXIT_ON_IRQ_STACK (Mamatha Inamdar) [2129351] Resolves: rhbz#2135958, rhbz#2140492, rhbz#2127026, rhbz#2143376, rhbz#2141962, rhbz#2141966, rhbz#2144693, rhbz#2144847, rhbz#2108291, rhbz#2141648, rhbz#2071849, rhbz#2129156, rhbz#2137947, rhbz#2129351 Signed-off-by: Frantisek Hrbata <fhrbata@redhat.com>
68 lines
2.3 KiB
Makefile
68 lines
2.3 KiB
Makefile
RHEL_MAJOR = 9
|
|
RHEL_MINOR = 2
|
|
|
|
#
|
|
# RHEL_RELEASE
|
|
# -------------
|
|
#
|
|
# Represents build number in 'release' part of RPM's name-version-release.
|
|
# name is <package_name>, e.g. kernel
|
|
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
|
|
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
RHEL_RELEASE = 203
|
|
|
|
#
|
|
# ZSTREAM
|
|
# -------
|
|
#
|
|
# This variable controls whether we use zstream numbering or not for the
|
|
# package release. The zstream release keeps the build number of the last
|
|
# build done for ystream for the Beta milestone, and increments a second
|
|
# number for each build. The third number is used for branched builds
|
|
# (eg.: for builds with security fixes or hot fixes done outside of the
|
|
# batch release process).
|
|
#
|
|
# For example, with ZSTREAM unset or set to "no", all builds will contain
|
|
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
|
|
# where X is the build number. With ZSTREAM set to "yes", we will have
|
|
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
|
|
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
|
|
# build number and Z will always be 1 except if you're doing a branched build
|
|
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
|
|
# number will be incremented instead of the Y).
|
|
#
|
|
ZSTREAM ?= no
|
|
|
|
#
|
|
# Early y+1 numbering
|
|
# --------------------
|
|
#
|
|
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
|
|
# First is RHEL_RELEASE inherited/merged from y as-is, second number
|
|
# is incremented with each build starting from 1. After merge from y,
|
|
# it resets back to 1. This way y+1 nvr reflects status of last merge.
|
|
#
|
|
# Example:
|
|
#
|
|
# rhel8.0 rhel-8.1
|
|
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
|
|
# kernel-4.18.0-58.2.el8
|
|
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
|
|
# kernel-4.18.0-60.el8
|
|
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
|
|
#
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
EARLY_YSTREAM ?= no
|
|
EARLY_YBUILD:=
|
|
EARLY_YRELEASE:=
|
|
ifneq ("$(ZSTREAM)", "yes")
|
|
ifeq ("$(EARLY_YSTREAM)","yes")
|
|
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
|
|
endif
|
|
endif
|