kernel-5.14.0-387.el9

* Sun Nov 19 2023 Jan Stancek <jstancek@redhat.com> [5.14.0-387.el9]
- iommu: Avoid unnecessary cache invalidations (Jerry Snitselaar) [RHEL-10094]
- mm: slab: Do not create kmalloc caches smaller than arch_slab_minalign() (Jerry Snitselaar) [RHEL-10094]
- swiotlb: make io_tlb_default_mem local to swiotlb.c (Jerry Snitselaar) [RHEL-10094]
- swiotlb: optimize get_max_slots() (Jerry Snitselaar) [RHEL-10094]
- swiotlb: use the calculated number of areas (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Avoid memory allocation in iommu_suspend() (Jerry Snitselaar) [RHEL-10094]
- iommu/arm-smmu-v3: Avoid constructing invalid range commands (Jerry Snitselaar) [RHEL-10094]
- iommu: Remove kernel-doc warnings (Jerry Snitselaar) [RHEL-10094]
- iommu: Avoid locking/unlocking for iommu_probe_device() (Jerry Snitselaar) [RHEL-10094]
- iommu: Split iommu_group_add_device() (Jerry Snitselaar) [RHEL-10094]
- iommu: Always destroy the iommu_group during iommu_release_device() (Jerry Snitselaar) [RHEL-10094]
- iommu: Do not export iommu_device_link/unlink() (Jerry Snitselaar) [RHEL-10094]
- iommu: Move the iommu driver sysfs setup into iommu_init/deinit_device() (Jerry Snitselaar) [RHEL-10094]
- iommu: Add iommu_init/deinit_device() paired functions (Jerry Snitselaar) [RHEL-10094]
- iommu: Simplify the __iommu_group_remove_device() flow (Jerry Snitselaar) [RHEL-10094]
- iommu: Inline iommu_group_get_for_dev() into __iommu_probe_device() (Jerry Snitselaar) [RHEL-10094]
- iommu: Use iommu_group_ref_get/put() for dev->iommu_group (Jerry Snitselaar) [RHEL-10094]
- iommu: Have __iommu_probe_device() check for already probed devices (Jerry Snitselaar) [RHEL-10094]
- iommu/amd: Rearrange DTE bit definations (Jerry Snitselaar) [RHEL-10094]
- iommu/amd: Remove unsued extern declaration amd_iommu_init_hardware() (Jerry Snitselaar) [RHEL-10094]
- iommu/amd: Enable PPR/GA interrupt after interrupt handler setup (Jerry Snitselaar) [RHEL-3655]
- iommu/amd: Consolidate PPR log enablement (Jerry Snitselaar) [RHEL-3655]
- iommu/amd: Disable PPR log/interrupt in iommu_disable() (Jerry Snitselaar) [RHEL-3655]
- iommu/amd: Enable separate interrupt for PPR and GA log (Jerry Snitselaar) [RHEL-3655]
- iommu/amd: Refactor IOMMU interrupt handling logic for Event, PPR, and GA logs (Jerry Snitselaar) [RHEL-3655]
- iommu/amd: Handle PPR log overflow (Jerry Snitselaar) [RHEL-3655]
- iommu/amd: Generalize log overflow handling (Jerry Snitselaar) [RHEL-3655]
- iommu/vt-d: Fix to convert mm pfn to dma pfn (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Fix to flush cache of PASID directory table (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Remove rmrr check in domain attaching device path (Jerry Snitselaar) [RHEL-10094]
- iommu: Prevent RESV_DIRECT devices from blocking domains (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Add set_dev_pasid callback for dma domain (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Prepare for set_dev_pasid callback (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Make prq draining code generic (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Remove pasid_mutex (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Add domain_flush_pasid_iotlb() (Jerry Snitselaar) [RHEL-10094]
- iommu: Move global PASID allocation from SVA to core (Jerry Snitselaar) [RHEL-10094]
- iommu: Generalize PASID 0 for normal DMA w/o PASID (Jerry Snitselaar) [RHEL-10094]
- iommu/arm-smmu-qcom: Add SM6375 SMMUv2 (Jerry Snitselaar) [RHEL-10094]
- iommu/arm-smmu-qcom: Add SM6350 DPU compatible (Jerry Snitselaar) [RHEL-10094]
- iommu/arm-smmu-qcom: Add SM6375 DPU compatible (Jerry Snitselaar) [RHEL-10094]
- iommu/arm-smmu-qcom: Sort the compatible list alphabetically (Jerry Snitselaar) [RHEL-10094]
- iommu/arm-smmu-v3: Change vmid alloc strategy from bitmap to ida (Jerry Snitselaar) [RHEL-10094]
- iommu/ipmmu-vmsa: Allow PCIe devices (Jerry Snitselaar) [RHEL-10094]
- iommu/ipmmu-vmsa: Convert to read_poll_timeout_atomic() (Jerry Snitselaar) [RHEL-10094]
- iommufd/selftest: Don't leak the platform device memory when unloading the module (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Implement hw_info for iommu capability query (Jerry Snitselaar) [RHEL-10094]
- iommufd/selftest: Add coverage for IOMMU_GET_HW_INFO ioctl (Jerry Snitselaar) [RHEL-10094]
- iommufd: Add IOMMU_GET_HW_INFO (Jerry Snitselaar) [RHEL-10094]
- iommu: Add new iommu op to get iommu hardware information (Jerry Snitselaar) [RHEL-10094]
- iommu: Move dev_iommu_ops() to private header (Jerry Snitselaar) [RHEL-10094]
- iommufd: Remove iommufd_ref_to_users() (Jerry Snitselaar) [RHEL-10094]
- iommufd/selftest: Make the mock iommu driver into a real driver (Jerry Snitselaar) [RHEL-10094]
- iommufd/selftest: Add IOMMU_TEST_OP_ACCESS_REPLACE_IOAS coverage (Jerry Snitselaar) [RHEL-10094]
- iommufd: Add iommufd_access_replace() API (Jerry Snitselaar) [RHEL-10094]
- iommufd: Use iommufd_access_change_ioas in iommufd_access_destroy_object (Jerry Snitselaar) [RHEL-10094]
- iommufd: Add iommufd_access_change_ioas(_id) helpers (Jerry Snitselaar) [RHEL-10094]
- iommufd: Allow passing in iopt_access_list_id to iopt_remove_access() (Jerry Snitselaar) [RHEL-10094]
- iommufd/selftest: Add a selftest for IOMMU_HWPT_ALLOC (Jerry Snitselaar) [RHEL-10094]
- iommufd/selftest: Return the real idev id from selftest mock_domain (Jerry Snitselaar) [RHEL-10094]
- iommufd: Add IOMMU_HWPT_ALLOC (Jerry Snitselaar) [RHEL-10094]
- iommufd/selftest: Test iommufd_device_replace() (Jerry Snitselaar) [RHEL-10094]
- iommufd: Make destroy_rwsem use a lock class per object type (Jerry Snitselaar) [RHEL-10094]
- iommufd: Add iommufd_device_replace() (Jerry Snitselaar) [RHEL-10094]
- iommu: Introduce a new iommu_group_replace_domain() API (Jerry Snitselaar) [RHEL-10094]
- iommufd: Reorganize iommufd_device_attach into iommufd_device_change_pt (Jerry Snitselaar) [RHEL-10094]
- iommufd: Fix locking around hwpt allocation (Jerry Snitselaar) [RHEL-10094]
- iommufd: Allow a hwpt to be aborted after allocation (Jerry Snitselaar) [RHEL-10094]
- iommufd: Add enforced_cache_coherency to iommufd_hw_pagetable_alloc() (Jerry Snitselaar) [RHEL-10094]
- iommufd: Move putting a hwpt to a helper function (Jerry Snitselaar) [RHEL-10094]
- iommufd: Make sw_msi_start a group global (Jerry Snitselaar) [RHEL-10094]
- iommufd: Use the iommufd_group to avoid duplicate MSI setup (Jerry Snitselaar) [RHEL-10094]
- iommufd: Keep track of each device's reserved regions instead of groups (Jerry Snitselaar) [RHEL-10094]
- iommu: Export iommu_get_resv_regions() (Jerry Snitselaar) [RHEL-10094]
- iommufd: Replace the hwpt->devices list with iommufd_group (Jerry Snitselaar) [RHEL-10094]
- iommufd: Add iommufd_group (Jerry Snitselaar) [RHEL-10094]
- iommufd: Move isolated msi enforcement to iommufd_device_bind() (Jerry Snitselaar) [RHEL-10094]
- dma-pool: remove a __maybe_unused label in atomic_pool_expand (Jerry Snitselaar) [RHEL-10094]
- dma-debug: don't call __dma_entry_alloc_check_leak() under free_entries_lock (Jerry Snitselaar) [RHEL-10094]
- swiotlb: bail out of swiotlb_init_late() if swiotlb is already allocated (Jerry Snitselaar) [RHEL-10094]
- dma-mapping: move arch_dma_set_mask() declaration to header (Jerry Snitselaar) [RHEL-10094]
- swiotlb: unexport is_swiotlb_active (Jerry Snitselaar) [RHEL-10094]
- iommufd: Set end correctly when doing batch carry (Jerry Snitselaar) [RHEL-10094]
- iommufd: IOMMUFD_DESTROY should not increase the refcount (Jerry Snitselaar) [RHEL-10094]
- iommu/sva: Fix signedness bug in iommu_sva_alloc_pasid() (Jerry Snitselaar) [RHEL-10094]
- iommu: Fix crash during syfs iommu_groups/N/type (Jerry Snitselaar) [RHEL-10094]
- drm/nouveau: stop using is_swiotlb_active (Jerry Snitselaar) [RHEL-10094]
- swiotlb: use the atomic counter of total used slabs if available (Jerry Snitselaar) [RHEL-10094]
- swiotlb: remove unused field "used" from struct io_tlb_mem (Jerry Snitselaar) [RHEL-10094]
- dma-remap: use kvmalloc_array/kvfree for larger dma memory remap (Jerry Snitselaar) [RHEL-10094]
- dma-mapping: fix a Kconfig typo (Jerry Snitselaar) [RHEL-10094]
- iommufd: Do not access the area pointer after unlocking (Jerry Snitselaar) [RHEL-10094]
- iommu/amd: Remove extern from function prototypes (Jerry Snitselaar) [RHEL-10094]
- iommu/amd: Use BIT/BIT_ULL macro to define bit fields (Jerry Snitselaar) [RHEL-10094]
- iommu/amd: Fix compile error for unused function (Jerry Snitselaar) [RHEL-10026]
- iommu/amd: Improving Interrupt Remapping Table Invalidation (Jerry Snitselaar) [RHEL-10026]
- iommu/amd: Do not Invalidate IRT when IRTE caching is disabled (Jerry Snitselaar) [RHEL-10026]
- iommu/amd: Introduce Disable IRTE Caching Support (Jerry Snitselaar) [RHEL-10026]
- iommu/amd: Remove the unused struct amd_ir_data.ref (Jerry Snitselaar) [RHEL-10026]
- iommu/amd: Switch amd_iommu_update_ga() to use modify_irte_ga() (Jerry Snitselaar) [RHEL-10026]
- iommu/amd: Update copyright notice (Jerry Snitselaar) [RHEL-10094]
- iommu/amd: Use page mode macros in fetch_pte() (Jerry Snitselaar) [RHEL-10094]
- iommu: Tidy the control flow in iommu_group_store_type() (Jerry Snitselaar) [RHEL-10094]
- iommu: Remove __iommu_group_for_each_dev() (Jerry Snitselaar) [RHEL-10094]
- iommu: Allow IOMMU_RESV_DIRECT to work on ARM (Jerry Snitselaar) [RHEL-10094]
- iommu: Consolidate the default_domain setup to one function (Jerry Snitselaar) [RHEL-10094]
- iommu: Revise iommu_group_alloc_default_domain() (Jerry Snitselaar) [RHEL-10094]
- iommu: Consolidate the code to calculate the target default domain type (Jerry Snitselaar) [RHEL-10094]
- iommu: Remove the assignment of group->domain during default domain alloc (Jerry Snitselaar) [RHEL-10094]
- iommu: Do iommu_group_create_direct_mappings() before attach (Jerry Snitselaar) [RHEL-10094]
- iommu: Fix iommu_probe_device() to attach the right domain (Jerry Snitselaar) [RHEL-10094]
- iommu: Replace iommu_group_do_dma_first_attach with __iommu_device_set_domain (Jerry Snitselaar) [RHEL-10094]
- iommu: Remove iommu_group_do_dma_first_attach() from iommu_group_add_device() (Jerry Snitselaar) [RHEL-10094]
- iommu: Replace __iommu_group_dma_first_attach() with set_domain (Jerry Snitselaar) [RHEL-10094]
- iommu: Use __iommu_group_set_domain() in iommu_change_dev_def_domain() (Jerry Snitselaar) [RHEL-10094]
- iommu: Use __iommu_group_set_domain() for __iommu_attach_group() (Jerry Snitselaar) [RHEL-10094]
- iommu: Make __iommu_group_set_domain() handle error unwind (Jerry Snitselaar) [RHEL-10094]
- iommu: Add for_each_group_device() (Jerry Snitselaar) [RHEL-10094]
- iommu: Replace iommu_group_device_count() with list_count_nodes() (Jerry Snitselaar) [RHEL-10094]
- iommu: Suppress empty whitespaces in prints (Jerry Snitselaar) [RHEL-10094]
- iommu: Use flush queue capability (Jerry Snitselaar) [RHEL-10094]
- iommu: Add a capability for flush queue support (Jerry Snitselaar) [RHEL-10094]
- iommu/iova: Optimize iova_magazine_alloc() (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Remove commented-out code (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Remove two WARN_ON in domain_context_mapping_one() (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Handle the failure case of dmar_reenable_qi() (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Remove unnecessary (void*) conversions (Jerry Snitselaar) [RHEL-10094]
- iommu/virtio: Return size mapped for a detached domain (Jerry Snitselaar) [RHEL-10094]
- iommu/virtio: Detach domain on endpoint release (Jerry Snitselaar) [RHEL-10094]
- iommu/arm-smmu-v3: Set TTL invalidation hint better (Jerry Snitselaar) [RHEL-10094]
- iommu/arm-smmu-v3: Document nesting-related errata (Jerry Snitselaar) [RHEL-10094]
- iommu/arm-smmu-v3: Add explicit feature for nesting (Jerry Snitselaar) [RHEL-10094]
- iommu/arm-smmu-v3: Document MMU-700 erratum 2812531 (Jerry Snitselaar) [RHEL-10094]
- iommu/arm-smmu-v3: Work around MMU-600 erratum 1076982 (Jerry Snitselaar) [RHEL-10094]
- iommu/dma: force bouncing if the size is not cacheline-aligned (Jerry Snitselaar) [RHEL-10094]
- dma-mapping: force bouncing if the kmalloc() size is not cache-line-aligned (Jerry Snitselaar) [RHEL-10094]
- powerpc: move the ARCH_DMA_MINALIGN definition to asm/cache.h (Jerry Snitselaar) [RHEL-10094]
- arm64: enable ARCH_WANT_KMALLOC_DMA_BOUNCE for arm64 (Jerry Snitselaar) [RHEL-10094]
- mm: slab: reduce the kmalloc() minimum alignment if DMA bouncing possible (Jerry Snitselaar) [RHEL-10094]
- arm64: allow kmalloc() caches aligned to the smaller cache_line_size() (Jerry Snitselaar) [RHEL-10094]
- dm-crypt: use ARCH_DMA_MINALIGN instead of ARCH_KMALLOC_MINALIGN (Jerry Snitselaar) [RHEL-10094]
- drivers/spi: use ARCH_DMA_MINALIGN instead of ARCH_KMALLOC_MINALIGN (Jerry Snitselaar) [RHEL-10094]
- drivers/usb: use ARCH_DMA_MINALIGN instead of ARCH_KMALLOC_MINALIGN (Jerry Snitselaar) [RHEL-10094]
- drivers/gpu: use ARCH_DMA_MINALIGN instead of ARCH_KMALLOC_MINALIGN (Jerry Snitselaar) [RHEL-10094]
- drivers/base: use ARCH_DMA_MINALIGN instead of ARCH_KMALLOC_MINALIGN (Jerry Snitselaar) [RHEL-10094]
- mm/slab: limit kmalloc() minimum alignment to dma_get_cache_alignment() (Jerry Snitselaar) [RHEL-10094]
- mm/slab: simplify create_kmalloc_cache() args and make it static (Jerry Snitselaar) [RHEL-10094]
- dma: allow dma_get_cache_alignment() to be overridden by the arch code (Jerry Snitselaar) [RHEL-10094]
- mm/slab: decouple ARCH_KMALLOC_MINALIGN from ARCH_DMA_MINALIGN (Jerry Snitselaar) [RHEL-10094]
- mm: slab: fix comment for ARCH_KMALLOC_MINALIGN (Jerry Snitselaar) [RHEL-10094]
- dma-mapping: name SG DMA flag helpers consistently (Jerry Snitselaar) [RHEL-10094]
- scatterlist: add dedicated config for DMA flags (Jerry Snitselaar) [RHEL-10094]
- iommu/amd/pgtbl_v2: Fix domain max address (Jerry Snitselaar) [RHEL-10007]
- iommu/amd: Handle GALog overflows (Jerry Snitselaar) [RHEL-10094]
- iommu: Make IPMMU_VMSA dependencies more strict (Jerry Snitselaar) [RHEL-10094]
- iommu/arm-smmu-qcom: Fix missing adreno_smmu's (Jerry Snitselaar) [RHEL-10094]
- rhel: configs: Clean up s390 IOMMU configs that no longer exist (Jerry Snitselaar) [RHEL-10094]
- s390/iommu: get rid of S390_CCW_IOMMU and S390_AP_IOMMU (Jerry Snitselaar) [RHEL-10094]
- iommu: Spelling s/cpmxchg64/cmpxchg64/ (Jerry Snitselaar) [RHEL-10094]
- iommu/ipmmu-vmsa: Convert to platform remove callback returning void (Jerry Snitselaar) [RHEL-10094]
- iommu/arm-smmu: Convert to platform remove callback returning void (Jerry Snitselaar) [RHEL-10094]
- iommu/arm-smmu-v3: Convert to platform remove callback returning void (Jerry Snitselaar) [RHEL-10094]
- iommu/arm-smmu: Drop if with an always false condition (Jerry Snitselaar) [RHEL-10094]
- iommu: Remove iommu_group_get_by_id() (Jerry Snitselaar) [RHEL-10094]
- iommu: Make iommu_release_device() static (Jerry Snitselaar) [RHEL-10094]
- iommu: Remove ioasid infrastructure (Jerry Snitselaar) [RHEL-10094]
- iommu/ioasid: Rename INVALID_IOASID (Jerry Snitselaar) [RHEL-10094]
- iommu/sva: Use GFP_KERNEL for pasid allocation (Jerry Snitselaar) [RHEL-10094]
- iommu/sva: Stop using ioasid_set for SVA (Jerry Snitselaar) [RHEL-10094]
- iommu/sva: Remove PASID to mm lookup function (Jerry Snitselaar) [RHEL-10094]
- iommu/sva: Move PASID helpers to sva code (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Remove virtual command interface (Jerry Snitselaar) [RHEL-10094]
- iommu: Use sysfs_emit() for sysfs show (Jerry Snitselaar) [RHEL-10094]
- iommu: Cleanup iommu_change_dev_def_domain() (Jerry Snitselaar) [RHEL-10094]
- iommu: Replace device_lock() with group->mutex (Jerry Snitselaar) [RHEL-10094]
- iommu: Move lock from iommu_change_dev_def_domain() to its caller (Jerry Snitselaar) [RHEL-10094]
- iommu: Same critical region for device release and removal (Jerry Snitselaar) [RHEL-10094]
- iommu: Split iommu_group_remove_device() into helpers (Jerry Snitselaar) [RHEL-10094]
- iommu/ipmmu-vmsa: Call arm_iommu_release_mapping() in release path (Jerry Snitselaar) [RHEL-10094]
- iommu: Use of_property_present() for testing DT property presence (Jerry Snitselaar) [RHEL-10094]
- iommu: Make kobj_type structure constant (Jerry Snitselaar) [RHEL-10094]
- iommu/amd: Add 5 level guest page table support (Jerry Snitselaar) [RHEL-10042]
- iommu/amd: Allocate IOMMU irqs using numa locality info (Jerry Snitselaar) [RHEL-10094]
- iommu/amd: Allocate page table using numa locality info (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Remove BUG_ON in dmar_insert_dev_scope() (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Remove a useless BUG_ON(dev->is_virtfn) (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Remove BUG_ON in map/unmap() (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Remove BUG_ON when domain->pgd is NULL (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Remove BUG_ON in handling iotlb cache invalidation (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Remove BUG_ON on checking valid pfn range (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Make size of operands same in bitwise operations (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Remove PASID supervisor request support (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Use non-privileged mode for all PASIDs (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Remove extern from function prototypes (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Do not use GFP_ATOMIC when not needed (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Remove unnecessary checks in iopf disabling path (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Move PRI handling to IOPF feature path (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Move pfsid and ats_qdep calculation to device probe path (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Move iopf code from SVA to IOPF enabling path (Jerry Snitselaar) [RHEL-10094]
- iommu/vt-d: Allow SVA with device-specific IOPF (Jerry Snitselaar) [RHEL-10094]
- iommu/arm-smmu-v3: Acknowledge pri/event queue overflow if any (Jerry Snitselaar) [RHEL-10094]
- iommu/arm-smmu-qcom: Limit the SMR groups to 128 (Jerry Snitselaar) [RHEL-10094]
- iommu/arm-smmu-v3: Explain why ATS stays disabled with bypass (Jerry Snitselaar) [RHEL-10094]
- iommu/ipmmu-vmsa: remove R-Car H3 ES1.* handling (Jerry Snitselaar) [RHEL-10094]
- swiotlb: Omit total_used and used_hiwater if !CONFIG_DEBUG_FS (Jerry Snitselaar) [RHEL-10094]
- swiotlb: track and report io_tlb_used high water marks in debugfs (Jerry Snitselaar) [RHEL-10094]
- swiotlb: fix debugfs reporting of reserved memory pools (Jerry Snitselaar) [RHEL-10094]
- swiotlb: relocate PageHighMem test away from rmem_swiotlb_setup (Jerry Snitselaar) [RHEL-10094]
- dma-mapping: provide CONFIG_ARCH_DMA_DEFAULT_COHERENT (Jerry Snitselaar) [RHEL-10094]
- dma-mapping: provide a fallback dma_default_coherent (Jerry Snitselaar) [RHEL-10094]
- dma-debug: Use %%pa to format phys_addr_t (Jerry Snitselaar) [RHEL-10094]
- dma-debug: add cacheline to user/kernel space dump messages (Jerry Snitselaar) [RHEL-10094]
- dma-debug: small dma_debug_entry's comment and variable name updates (Jerry Snitselaar) [RHEL-10094]
- dma-direct: cleanup parameters to dma_direct_optimal_gfp_mask (Jerry Snitselaar) [RHEL-10094]
- iommu/sva: Replace pasid_valid() helper with mm_valid_pasid() (Jerry Snitselaar) [RHEL-10094]
- dma-mapping: benchmark: remove MODULE_LICENSE in non-modules (Jerry Snitselaar) [RHEL-10094]
- iommufd/selftest: Cover domain unmap with huge pages and access (Jerry Snitselaar) [RHEL-10094]
- iommufd/selftest: Set varaiable mock_iommu_device storage-class-specifier to static (Jerry Snitselaar) [RHEL-10094]
- iommufd/selftest: Catch overflow of uptr and length (Jerry Snitselaar) [RHEL-10094]
- iommufd/selftest: Add a selftest for iommufd_device_attach() with a hwpt argument (Jerry Snitselaar) [RHEL-10094]
- iommufd/selftest: Make selftest create a more complete mock device (Jerry Snitselaar) [RHEL-10094]
- iommufd/selftest: Rename the remaining mock device_id's to stdev_id (Jerry Snitselaar) [RHEL-10094]
- iommufd/selftest: Rename domain_id to hwpt_id for FIXTURE iommufd_mock_domain (Jerry Snitselaar) [RHEL-10094]
- iommufd/selftest: Rename domain_id to stdev_id for FIXTURE iommufd_ioas (Jerry Snitselaar) [RHEL-10094]
- iommufd/selftest: Rename the sefltest 'device_id' to 'stdev_id' (Jerry Snitselaar) [RHEL-10094]
- iommufd: Make iommufd_hw_pagetable_alloc() do iopt_table_add_domain() (Jerry Snitselaar) [RHEL-10094]
- iommufd: Move iommufd_device to iommufd_private.h (Jerry Snitselaar) [RHEL-10094]
- iommufd: Move ioas related HWPT destruction into iommufd_hw_pagetable_destroy() (Jerry Snitselaar) [RHEL-10094]
- iommufd: Consistently manage hwpt_item (Jerry Snitselaar) [RHEL-10094]
- iommufd: Add iommufd_lock_obj() around the auto-domains hwpts (Jerry Snitselaar) [RHEL-10094]
- iommufd: Assert devices_lock for iommufd_hw_pagetable_has_group() (Jerry Snitselaar) [RHEL-10094]
- iommu/amd: Set page size bitmap during V2 domain allocation (Jerry Snitselaar) [RHEL-10007]
- iommu/amd: Fix sparse warning (Jerry Snitselaar) [RHEL-10007]
- iommu/amd: Remove outdated comment (Jerry Snitselaar) [RHEL-10007]
- iommu/amd: Add command-line option to enable different page table (Jerry Snitselaar) [RHEL-10007]
- iommu/amd: Add support for using AMD IOMMU v2 page table for DMA-API (Jerry Snitselaar) [RHEL-10007]
- iommu/amd: Add support for Guest IO protection (Jerry Snitselaar) [RHEL-10007]
- iommu/amd: Initial support for AMD IOMMU v2 page table (Jerry Snitselaar) [RHEL-10007]
- iommu/amd: Update sanity check when enable PRI/ATS for IOMMU v1 table (Jerry Snitselaar) [RHEL-10007]
- iommu/amd: Refactor amd_iommu_domain_enable_v2 to remove locking (Jerry Snitselaar) [RHEL-10007]
- iommu/ipmmu-vmsa: Remove ipmmu_utlb_disable() (Jerry Snitselaar) [RHEL-10094]
- iommu: Remove detach_dev callbacks (Jerry Snitselaar) [RHEL-10094]
- iommu/ipmmu-vmsa: Update to {map,unmap}_pages (Jerry Snitselaar) [RHEL-10094]
- iommu/ipmmu-vmsa: Clean up bus_set_iommu() (Jerry Snitselaar) [RHEL-10094]
- iommu/ipmmu-vmsa: Fix compatible for rcar-gen4 (Jerry Snitselaar) [RHEL-10094]
- iommu/ipmmu-vmsa: Add support for R-Car Gen4 (Jerry Snitselaar) [RHEL-10094]
- iommu/ipmmu-vmsa: Check for error num after setting mask (Jerry Snitselaar) [RHEL-10094]
- iommu/ipmmu-vmsa: Hook up r8a77980 DT matching code (Jerry Snitselaar) [RHEL-10094]
- iommu/ipmmu-vmsa: Add support for r8a779a0 (Jerry Snitselaar) [RHEL-10094]
- iommu/ipmmu-vmsa: Drop IOVA cookie management (Jerry Snitselaar) [RHEL-10094]
- x86_64: Remove pointless set_64bit() usage (Jerry Snitselaar) [RHEL-10094]
- iommu/amd: Fix possible memory leak of 'domain' (Jerry Snitselaar) [RHEL-800]
- iommu/amd/iommu_v2: Clear pasid state in free path (Jerry Snitselaar) [2223717]
- iommu/amd/iommu_v2: Fix pasid_state refcount dec hit 0 warning on pasid unbind (Jerry Snitselaar) [2223717]
- iommu/amd: Fix DTE_IRQ_PHYS_ADDR_MASK macro (Jerry Snitselaar) [RHEL-800]
- iommu/amd: Fix domain flush size when syncing iotlb (Jerry Snitselaar) [RHEL-800]
- iommu/amd: Add missing domain type checks (Jerry Snitselaar) [RHEL-800]
- iommu/amd: Don't block updates to GATag if guest mode is on (Jerry Snitselaar) [RHEL-800]
- iommu/amd: Fix "Guest Virtual APIC Table Root Pointer" configuration in IRTE (Jerry Snitselaar) [RHEL-800]
- swiotlb: reduce the number of areas to match actual memory pool size (Jerry Snitselaar) [RHEL-800]
- swiotlb: always set the number of areas before allocating the pool (Jerry Snitselaar) [RHEL-800]
- redhat: Enable -Werror for s390x and ppc64le, too (Thomas Huth) [RHEL-12454]
- cachestat: wire up cachestat for other architectures (Thomas Huth) [RHEL-12454]
- genirq: Allow irq_chip registration functions to take a const irq_chip (Thomas Huth) [RHEL-12454]
- scsi: ibmvscsi: Avoid multi-field memset() overflow by aiming at srp (Thomas Huth) [RHEL-12454]
- uaccess: fix type mismatch warnings from access_ok() (Thomas Huth) [RHEL-12454]
- s390/con3270: use proper type for tasklet function (Thomas Huth) [RHEL-12454]
- net/smc: Remove left-over label and code from a previous incomplete backport (Thomas Huth) [RHEL-12454]
- KVM: s390: add tracepoint in gmap notifier (Thomas Huth) [RHEL-11438]
- KVM: s390: add stat counter for shadow gmap events (Thomas Huth) [RHEL-11438]
- powerpc/pseries: Honour current SMT state when DLPAR onlining CPUs (Mamatha Inamdar) [RHEL-5838]
- powerpc: Add HOTPLUG_SMT support (Mamatha Inamdar) [RHEL-5838]
- powerpc/pseries: Initialise CPU hotplug callbacks earlier (Mamatha Inamdar) [RHEL-5838]
- cpu/SMT: Allow enabling partial SMT states via sysfs (Mamatha Inamdar) [RHEL-5838]
- cpu/SMT: Create topology_smt_thread_allowed() (Mamatha Inamdar) [RHEL-5838]
- cpu/SMT: Remove topology_smt_supported() (Mamatha Inamdar) [RHEL-5838]
- cpu/SMT: Store the current/max number of threads (Mamatha Inamdar) [RHEL-5838]
- cpu/SMT: Move smt/control simple exit cases earlier (Mamatha Inamdar) [RHEL-5838]
- cpu/SMT: Move SMT prototypes into cpu_smt.h (Mamatha Inamdar) [RHEL-5838]
- hwmon: (ina3221) Add support for channel summation disable (Steve Best) [RHEL-1899]
- virtchnl: Add header dependencies (Ivan Vecera) [RHEL-15261]
- virtchnl: Add CRC stripping capability (Ivan Vecera) [RHEL-15261]
- virtchnl: fix fake 1-elem arrays for structures allocated as `nents` (Ivan Vecera) [RHEL-15261]
- virtchnl: fix fake 1-elem arrays in structures allocated as `nents + 1` (Ivan Vecera) [RHEL-15261]
- virtchnl: fix fake 1-elem arrays in structs allocated as `nents + 1` - 1 (Ivan Vecera) [RHEL-15261]
- virtchnl: do structure hardening (Ivan Vecera) [RHEL-15261]
- virtchnl: update header and increase header clarity (Ivan Vecera) [RHEL-15261]
- virtchnl: remove unused structure declaration (Ivan Vecera) [RHEL-15261]
- powerpc/iommu: TCEs are incorrectly manipulated with DLPAR add/remove of memory (Mamatha Inamdar) [RHEL-11213]
- powerpc/iommu: Incorrect DDW Table is referenced for SR-IOV device (Mamatha Inamdar) [RHEL-11213]
- powerpc/iommu: DMA address offset is incorrectly calculated with 2MB TCEs (Mamatha Inamdar) [RHEL-11213]
- powerpc/iommu: fix memory leak with using debugfs_lookup() (Mamatha Inamdar) [RHEL-11213]
- powerpc/iommu: Fix iommu_table_in_use for a small default DMA window case (Mamatha Inamdar) [RHEL-11213]
- pseries/iommu/ddw: Fix kdump to work in absence of ibm,dma-window (Mamatha Inamdar) [RHEL-11213]
- powerpc/pseries/iommu: Print ibm,query-pe-dma-windows parameters (Mamatha Inamdar) [RHEL-11213]
- powerpc/pseries/ddw: Do not try direct mapping with persistent memory and one window (Mamatha Inamdar) [RHEL-11213]
- powerpc/pseries/ddw: simplify enable_ddw() (Mamatha Inamdar) [RHEL-11213]
- powerpc/pseries/iommu: Create huge DMA window if no MMIO32 is present (Mamatha Inamdar) [RHEL-11213]
- powerpc/pseries/iommu: Check if the default window in use before removing it (Mamatha Inamdar) [RHEL-11213]
- powerpc/pseries/iommu: Use correct vfree for it_map (Mamatha Inamdar) [RHEL-11213]
- powerpc/pseries/iommu: Add of_node_put() before break (Mamatha Inamdar) [RHEL-11213]
- powerpc/pseries/iommu: Rename "direct window" to "dma window" (Mamatha Inamdar) [RHEL-11213]
- powerpc/pseries/iommu: Make use of DDW for indirect mapping (Mamatha Inamdar) [RHEL-11213]
- powerpc/pseries/iommu: Find existing DDW with given property name (Mamatha Inamdar) [RHEL-11213]
- powerpc/pseries/iommu: Update remove_dma_window() to accept property name (Mamatha Inamdar) [RHEL-11213]
- powerpc/pseries/iommu: Reorganize iommu_table_setparms*() with new helper (Mamatha Inamdar) [RHEL-11213]
- powerpc/pseries/iommu: Add ddw_property_create() and refactor enable_ddw() (Mamatha Inamdar) [RHEL-11213]
- powerpc/pseries/iommu: Allow DDW windows starting at 0x00 (Mamatha Inamdar) [RHEL-11213]
- powerpc/pseries/iommu: Add ddw_list_new_entry() helper (Mamatha Inamdar) [RHEL-11213]
- powerpc/pseries/iommu: Add iommu_pseries_alloc_table() helper (Mamatha Inamdar) [RHEL-11213]
- powerpc/pseries/iommu: Replace hard-coded page shift (Mamatha Inamdar) [RHEL-11213]
- powerpc/kernel/iommu: Add new iommu_table_in_use() helper (Mamatha Inamdar) [RHEL-11213]
- dt-bindings: usb: qcom,dwc3: allow required-opps (Desnes Nunes) [RHEL-13058]
- usb: dwc3: gadget: Reset num TRBs before giving back the request (Desnes Nunes) [RHEL-13058]
- usb: dwc3: gadget: Improve dwc3_gadget_suspend() and dwc3_gadget_resume() (Desnes Nunes) [RHEL-13058]
- usb: dwc3: gadget: Refactor EP0 forced stall/restart into a separate API (Desnes Nunes) [RHEL-13058]
- usb: dwc3: gadget: Execute gadget stop after halting the controller (Desnes Nunes) [RHEL-13058]
- usb: dwc3: gadget: Stall and restart EP0 if host is unresponsive (Desnes Nunes) [RHEL-13058]
- USB: dwc3: gadget: drop dead hibernation code (Desnes Nunes) [RHEL-13058]
- usb: remove dead code in dwc3_gadget_get_irq (Desnes Nunes) [RHEL-13058]
- usb: dwc3: gadget: Change condition for processing suspend event (Desnes Nunes) [RHEL-13058]
- usb: dwc3: gadget: Add 1ms delay after end transfer command without IOC (Desnes Nunes) [RHEL-13058]
- usb: ulpi: Use of_request_module() (Desnes Nunes) [RHEL-13058]
- of: device: Kill of_device_request_module() (Desnes Nunes) [RHEL-13058]
- of: Move the request module helper logic to module.c (Desnes Nunes) [RHEL-13058]
- of: Move of_modalias() to module.c (Desnes Nunes) [RHEL-13058]
- of: Rename of_modalias_node() (Desnes Nunes) [RHEL-13058]
- of: move from strlcpy with unused retval to strscpy (Desnes Nunes) [RHEL-13058]
- of: Update of_device_get_modalias() (Desnes Nunes) [RHEL-13058]
- of: device: Do not ignore error code in of_device_uevent_modalias (Desnes Nunes) [RHEL-13058]
- of: device: Ignore modalias of reused nodes (Desnes Nunes) [RHEL-13058]
- of: Fix modalias string generation (Desnes Nunes) [RHEL-13058]
- usb: typec: Fix fast_role_swap_current show function (Desnes Nunes) [RHEL-13058]
- usb: typec: ucsi: Fix command cancellation (Desnes Nunes) [RHEL-13058]
- USB: dwc3: fix use-after-free on core driver unbind (Desnes Nunes) [RHEL-13058]
- USB: dwc3: qcom: fix NULL-deref on suspend (Desnes Nunes) [RHEL-13058]
- USB: serial: option: add Quectel EM061KGL series (Desnes Nunes) [RHEL-13058]
- usb: typec: tps6598x: Fix broken polling mode after system suspend/resume (Desnes Nunes) [RHEL-13058]
- usb: usbfs: Use consistent mmap functions (Desnes Nunes) [RHEL-13058]
- usb: usbfs: Enforce page requirements for mmap (Desnes Nunes) [RHEL-13058]
- dt-bindings: usb: snps,dwc3: Fix "snps,hsphy_interface" type (Desnes Nunes) [RHEL-13058]
- thunderbolt: Do not touch CL state configuration during discovery (Desnes Nunes) [RHEL-13058]
- thunderbolt: dma_test: Use correct value for absent rings when creating paths (Desnes Nunes) [RHEL-13058]
- xhci: Fix incorrect tracking of free space on transfer rings (Desnes Nunes) [RHEL-13058]
- xhci-pci: Only run d3cold avoidance quirk for s2idle (Desnes Nunes) [RHEL-13058]
- media: ttusb-dec: fix memory leak in ttusb_dec_exit_dvb() (Desnes Nunes) [RHEL-13058]
- media: dvb-usb-v2: rtl28xxu: fix null-ptr-deref in rtl28xxu_i2c_xfer (Desnes Nunes) [RHEL-13058]
- media: dvb-usb-v2: ce6230: fix null-ptr-deref in ce6230_i2c_master_xfer() (Desnes Nunes) [RHEL-13058]
- media: dvb-usb-v2: ec168: fix null-ptr-deref in ec168_i2c_xfer() (Desnes Nunes) [RHEL-13058]
- usb-storage: fix deadlock when a scsi command timeouts more than once (Desnes Nunes) [RHEL-13058]
- usb: dwc3: fix a test for error in dwc3_core_init() (Desnes Nunes) [RHEL-13058]
- usb: typec: tps6598x: Fix fault at module removal (Desnes Nunes) [RHEL-13058]
- usb: typec: altmodes/displayport: fix pin_assignment_show (Desnes Nunes) [RHEL-13058]
- usb: dwc3: debugfs: Resume dwc3 before accessing registers (Desnes Nunes) [RHEL-13058]
- USB: UHCI: adjust zhaoxin UHCI controllers OverCurrent bit value (Desnes Nunes) [RHEL-13058]
- usb: dwc3: fix gadget mode suspend interrupt handler issue (Desnes Nunes) [RHEL-13058]
- USB: usbtmc: Fix direction for 0-length ioctl control messages (Desnes Nunes) [RHEL-13058]
- media: pvrusb2: fix DVB_CORE dependency (Desnes Nunes) [RHEL-13058]
- USB: sisusbvga: Add endpoint checks (Desnes Nunes) [RHEL-13058]
- USB: core: Add routines for endpoint checks in old drivers (Desnes Nunes) [RHEL-13058]
- dt-bindings: usb: snps,dwc3: Add 'snps,parkmode-disable-hs-quirk' quirk (Desnes Nunes) [RHEL-13058]
- usb: dwc3: core: add support for disabling High-speed park mode (Desnes Nunes) [RHEL-13058]
- dt-bindings: usb: ci-hdrc-usb2: allow multiple PHYs (Desnes Nunes) [RHEL-13058]
- usb: chipidea: fix missing goto in `ci_hdrc_probe` (Desnes Nunes) [RHEL-13058]
- usb: typec: ucsi: don't print PPM init deferred errors (Desnes Nunes) [RHEL-13058]
- usb: typec: tcpm: fix multiple times discover svids error (Desnes Nunes) [RHEL-13058]
- USB: dwc3: clean up probe declarations (Desnes Nunes) [RHEL-13058]
- USB: dwc3: refactor clock lookups (Desnes Nunes) [RHEL-13058]
- USB: dwc3: refactor phy handling (Desnes Nunes) [RHEL-13058]
- USB: dwc3: clean up core init error handling (Desnes Nunes) [RHEL-13058]
- USB: dwc3: clean up phy init error handling (Desnes Nunes) [RHEL-13058]
- USB: dwc3: clean up probe error labels (Desnes Nunes) [RHEL-13058]
- USB: dwc3: drop dead hibernation code (Desnes Nunes) [RHEL-13058]
- USB: dwc3: disable autosuspend on unbind (Desnes Nunes) [RHEL-13058]
- USB: dwc3: fix runtime pm imbalance on unbind (Desnes Nunes) [RHEL-13058]
- USB: dwc3: fix runtime pm imbalance on probe errors (Desnes Nunes) [RHEL-13058]
- usb: xhci-mtk: add optional frame count clock (Desnes Nunes) [RHEL-13058]
- dt-bindings: usb: mtk-xhci: add an optional frame count clock (Desnes Nunes) [RHEL-13058]
- usb: xhci: plat: Add USB 3.0 phy support (Desnes Nunes) [RHEL-13058]
- usb: host: xhci-plat: Use dev_is_pci() helper (Desnes Nunes) [RHEL-13058]
- xhci: fix debugfs register accesses while suspended (Desnes Nunes) [RHEL-13058]
- usb: gadget: tegra-xudc: Remove unneeded return variable (Desnes Nunes) [RHEL-13058]
- usb: gadget: tegra-xudc: Fix crash in vbus_draw (Desnes Nunes) [RHEL-13058]
- USB: serial: option: add UNISOC vendor and TOZED LT70C product (Desnes Nunes) [RHEL-13058]
- net: thunderbolt: Fix typos in comments (Desnes Nunes) [RHEL-13058]
- net: thunderbolt: Fix sparse warnings in tbnet_xmit_csum_and_map() (Desnes Nunes) [RHEL-13058]
- net: thunderbolt: Fix sparse warnings in tbnet_check_frame() and tbnet_poll() (Desnes Nunes) [RHEL-13058]
- media: mc-device: remove unnecessary __must_check (Desnes Nunes) [RHEL-13058]
- media: au0828: remove unnecessary (void*) conversions (Desnes Nunes) [RHEL-13058]
- USB: core: Fix docs warning caused by wireless_status feature (Desnes Nunes) [RHEL-13058]
- dt-bindings: Add missing (unevaluated|additional)Properties on child node schemas (Desnes Nunes) [RHEL-13058]
- dt-bindings: usb: mediatek,mtk-xhci: drop assigned-clocks (Desnes Nunes) [RHEL-13058]
- usb: chipidea: imx: avoid unnecessary probe defer (Desnes Nunes) [RHEL-13058]
- usb: typec: ucsi: acpi: add quirk for ASUS Zenbook UM325 (Desnes Nunes) [RHEL-13058]
- usb: dwc3: pci: Change PCI device macros (Desnes Nunes) [RHEL-13058]
- dt-bindings: usb: tps6598x: make interrupts optional (Desnes Nunes) [RHEL-13058]
- dt-bindings: usb: typec-tcpci: convert to DT schema format (Desnes Nunes) [RHEL-13058]
- usb: typec: tcpm: try to get role switch from tcpc fwnode (Desnes Nunes) [RHEL-13058]
- USB: core: Add API to change the wireless_status (Desnes Nunes) [RHEL-13058]
- USB: core: Add wireless_status sysfs attribute (Desnes Nunes) [RHEL-13058]
- ABI: sysfs-bus-usb: add missing sysfs fields (Desnes Nunes) [RHEL-13058]
- ABI: sysfs-bus-usb: use a wildcard for interface name on What (Desnes Nunes) [RHEL-13058]
- ABI: sysfs-bus-usb: better document variable argument (Desnes Nunes) [RHEL-13058]
- thunderbolt: Introduce usb4_port_sb_opcode_err_to_errno() helper (Desnes Nunes) [RHEL-13058]
- media: pvrusb2: clean up unneeded complexity in pvrusb2 class logic (Desnes Nunes) [RHEL-13058]
- usb: move config USB_USS720 to usb's misc Kconfig (Desnes Nunes) [RHEL-13058]
- usb: gadget: f_ecm: Add suspend/resume and remote wakeup support (Desnes Nunes) [RHEL-13058]
- usb: gadget: Handle function suspend feature selector (Desnes Nunes) [RHEL-13058]
- usb: dwc3: Add function suspend and function wakeup support (Desnes Nunes) [RHEL-13058]
- usb: gadget: Add function wakeup support (Desnes Nunes) [RHEL-13058]
- usb: dwc3: Add remote wakeup handling (Desnes Nunes) [RHEL-13058]
- usb: gadget: Properly configure the device for remote wakeup (Desnes Nunes) [RHEL-13058]
- dt-bindings: usb: usb-nop-xceiv: add power-domains property (Desnes Nunes) [RHEL-13058]
- dt-bindings: usb: ci-hdrc-usb2: convert to DT schema format (Desnes Nunes) [RHEL-13058]
- dt-bindings: usb: usbmisc-imx: convert to DT schema (Desnes Nunes) [RHEL-13058]
- thunderbolt: Make use of SI units from units.h (Desnes Nunes) [RHEL-13058]
- thunderbolt: Get rid of redundant 'else' (Desnes Nunes) [RHEL-13058]
- usb: dwc3: host: remove dead code in dwc3_host_get_irq() (Desnes Nunes) [RHEL-13058]
- usb: pci-quirks: Reduce the length of a spinlock section in usb_amd_find_chipset_info() (Desnes Nunes) [RHEL-13058]
- xhci: use pm_ptr() instead of #ifdef for CONFIG_PM conditionals (Desnes Nunes) [RHEL-13058]
- usb: xhci-pci: Set PROBE_PREFER_ASYNCHRONOUS (Desnes Nunes) [RHEL-13058]
- usb: typec: tps6598x: Add support for polling interrupts status (Desnes Nunes) [RHEL-13058]
- usb: dwc3: add several registers dump for debugfs (Desnes Nunes) [RHEL-13058]
- dt-bindings: usb: snps,dwc3: document HS & SS OF graph ports (Desnes Nunes) [RHEL-13058]
- usb: typec: ucsi: add PMIC Glink UCSI driver (Desnes Nunes) [RHEL-13058]
- usb: phy: tegra: Convert to platform remove callback returning void (Desnes Nunes) [RHEL-13058]
- usb: phy: mxs: Convert to platform remove callback returning void (Desnes Nunes) [RHEL-13058]
- usb: phy: generic: Convert to platform remove callback returning void (Desnes Nunes) [RHEL-13058]
- dt-bindings: usb: snps,dwc3: correct i.MX8MQ support (Desnes Nunes) [RHEL-13058]
- USB: serial: quatech2: remove unused qt2_setdevice function (Desnes Nunes) [RHEL-13058]
- usb: typec: tipd: remove unused tps6598x_write16,32 functions (Desnes Nunes) [RHEL-13058]
- usb: typec: tcpm: remove unnecessary (void*) conversions (Desnes Nunes) [RHEL-13058]
- usb: chipidea: debug: remove redundant 'role' debug file (Desnes Nunes) [RHEL-13058]
- xhci: Move xhci MSI sync function to to xhci-pci (Desnes Nunes) [RHEL-13058]
- xhci: Call MSI sync function from xhci-pci instead of generic xhci code (Desnes Nunes) [RHEL-13058]
- xhci: Move functions to cleanup MSI to xhci-pci (Desnes Nunes) [RHEL-13058]
- xhci: move PCI specific MSI/MSIX cleanup away from generic xhci functions (Desnes Nunes) [RHEL-13058]
- xhci: Move functions to setup msi to xhci-pci (Desnes Nunes) [RHEL-13058]
- xhci: Avoid PCI MSI/MSIX interrupt reinitialization at resume (Desnes Nunes) [RHEL-13058]
- xhci: dbc: Provide sysfs option to configure dbc descriptors (Desnes Nunes) [RHEL-13058]
- xhci: mem: Join string literals back (Desnes Nunes) [RHEL-13058]
- xhci: mem: Replace explicit castings with appropriate specifiers (Desnes Nunes) [RHEL-13058]
- xhci: mem: Use while (i--) pattern to clean up (Desnes Nunes) [RHEL-13058]
- xhci: mem: Drop useless return:s (Desnes Nunes) [RHEL-13058]
- xhci: mem: Get rid of redundant 'else' (Desnes Nunes) [RHEL-13058]
- xhci: mem: Use dma_poll_zalloc() instead of explicit memset() (Desnes Nunes) [RHEL-13058]
- xhci: mem: Carefully calculate size for memory allocations (Desnes Nunes) [RHEL-13058]
- redhat/configs: delete ftdi-elan driver config (Desnes Nunes) [RHEL-13058]
- usb: ftdi-elan: Delete driver (Desnes Nunes) [RHEL-13058]
- dt-bindings: usb: Drop unneeded quotes (Desnes Nunes) [RHEL-13058]
- redhat/configs: delete u132-hcd driver config (Desnes Nunes) [RHEL-13058]
- usb: host: u132-hcd: Delete driver (Desnes Nunes) [RHEL-13058]
- usb: host: u132-hcd: Drop if with an always true condition (Desnes Nunes) [RHEL-13058]
- usb: host: u132-hcd: Various style improvements (Desnes Nunes) [RHEL-13058]
- media: pvrusb2: VIDEO_PVRUSB2 depends on DVB_CORE to use dvb_* symbols (Desnes Nunes) [RHEL-13058]
- dt-bindings: usb: dwc3: Add QCM2290 compatible (Desnes Nunes) [RHEL-13058]
- usb: misc: usb3503: support usb3803 and bypass mode (Desnes Nunes) [RHEL-13058]
- usb: misc: usb3503: refactor code to prepare for usb3803 addition (Desnes Nunes) [RHEL-13058]
- dt-bindings: usb: smsc,usb3503: Add usb3803 (Desnes Nunes) [RHEL-13058]
- usb: typec: fusb302: mark OF related data as maybe unused (Desnes Nunes) [RHEL-13058]
- usb: acpi: Switch to use acpi_evaluate_dsm_typed() (Desnes Nunes) [RHEL-13058]
- usb: Use of_property_read_bool() for boolean properties (Desnes Nunes) [RHEL-13058]
- usb: usb251xb: Switch to use dev_err_probe() helper (Desnes Nunes) [RHEL-13058]
- usb: Use of_property_present() for testing DT property presence (Desnes Nunes) [RHEL-13058]
- usb: musb: fix error return code in omap2430_probe() (Desnes Nunes) [RHEL-13058]
- usb: musb: omap2430: Fix probe regression for missing resources (Desnes Nunes) [RHEL-13058]
- thunderbolt: Refactor DROM reading (Desnes Nunes) [RHEL-13058]
- thunderbolt: use `tb_eeprom_get_drom_offset` to discover DROM offset (Desnes Nunes) [RHEL-13058]
- dt-bindings: usb: snps,dwc3: support i.MX8MQ (Desnes Nunes) [RHEL-13058]
- usb: xhci: change some trace event __dynamic_array() to __get_buf() (Desnes Nunes) [RHEL-13058]
- tracing: Acquire buffer from temparary trace sequence (Desnes Nunes) [RHEL-13058]
- usb: dwc3: change some trace event __dynamic_array() to __get_buf() (Desnes Nunes) [RHEL-13058]
- usb: dwc3: core: add external vBus supply support for ulpi phy (Desnes Nunes) [RHEL-13058]
- dt-bindings: usb: dwc3: Add snps,ulpi-ext-vbus-drv quirk (Desnes Nunes) [RHEL-13058]
- dt-bindings: usb: allow evaluated properties in OHCI controllers (Desnes Nunes) [RHEL-13058]
- dt-bindings: usb: usb-device: make "compatible" optional (Desnes Nunes) [RHEL-13058]
- dt-bindings: usb: snps,dwc3: document extcon property (Desnes Nunes) [RHEL-13058]
- dt-bindings: usb: snps,dwc3: Allow power-domains property (Desnes Nunes) [RHEL-13058]
- usb: host: xhci-tegra: Drop using of_irq_parse_one() (Desnes Nunes) [RHEL-13058]
- dt-bindings: Fix SPI and I2C bus node names in examples (Desnes Nunes) [RHEL-13058]
- usb: gadget: Use correct endianness of the wLength field for WebUSB (Desnes Nunes) [RHEL-13058]
- usb: gadget: add WebUSB landing page support (Desnes Nunes) [RHEL-13058]
- usb: dwc3: pci: add support for the Intel Meteor Lake-S (Desnes Nunes) [RHEL-13058]
- usb: dwc3: Fix a typo in field name (Desnes Nunes) [RHEL-13058]
- usb: dwc3: xilinx: Remove unused of_gpio,h (Desnes Nunes) [RHEL-13058]
- usb: dwc3: pci: add support for the Intel Meteor Lake-M (Desnes Nunes) [RHEL-13058]
- USB: dwc3: fix memory leak with using debugfs_lookup() (Desnes Nunes) [RHEL-13058]
- dt-bindings: usb: dwc3-imx8mp: add power domain property (Desnes Nunes) [RHEL-13058]
- ipmi: Explicitly include correct DT includes (Tony Camuso) [RHEL-12707]
- ipmi_si: fix -Wvoid-pointer-to-enum-cast warning (Tony Camuso) [RHEL-12707]
- ipmi: fix potential deadlock on &kcs_bmc->lock (Tony Camuso) [RHEL-12707]
- ipmi_si: fix a memleak in try_smi_init() (Tony Camuso) [RHEL-12707]
- ipmi: Change request_module to request_module_nowait (Tony Camuso) [RHEL-12707]
- ipmi:ssif: Fix a memory leak when scanning for an adapter (Tony Camuso) [RHEL-12707]
- ipmi:ssif: Add check for kstrdup (Tony Camuso) [RHEL-12707]
- ipmi_watchdog: Fix read syscall not responding to signals during sleep (Tony Camuso) [RHEL-12707]
- ipmi:ssif: Drop if blocks with always false condition (Tony Camuso) [RHEL-12707]
- ipmi: fix SSIF not responding under certain cond. (Tony Camuso) [RHEL-12707]
- ipmi:ssif: Add send_retries increment (Tony Camuso) [RHEL-12707]
- char:ipmi:Fix spelling mistake "asychronously" -> "asynchronously" (Tony Camuso) [RHEL-12707]
- ipmi: simplify sysctl registration (Tony Camuso) [RHEL-12707]
- ipmi: ASPEED_BT_IPMI_BMC: select REGMAP_MMIO instead of depending on it (Tony Camuso) [RHEL-12707]
- vfio/mdev: Fix a null-ptr-deref bug for mdev_unregister_parent() (Alex Williamson) [RHEL-14318]
- vfio: Do not allow !ops->dma_unmap in vfio_pin/unpin_pages() (Alex Williamson) [RHEL-14318]
- vfio: align capability structures (Alex Williamson) [RHEL-14318]
- vfio/type1: fix cap_migration information leak (Alex Williamson) [RHEL-14318]
- vfio/fsl-mc: Use module_fsl_mc_driver macro to simplify the code (Alex Williamson) [RHEL-14318]
- vfio: Commonize combine_ranges for use in other VFIO drivers (Alex Williamson) [RHEL-14318]
- kvm/vfio: avoid bouncing the mutex when adding and deleting groups (Alex Williamson) [RHEL-14318]
- kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add() (Alex Williamson) [RHEL-14318]
- docs: vfio: Add vfio device cdev description (Alex Williamson) [RHEL-14318]
- vfio: Compile vfio_group infrastructure optionally (Alex Williamson) [RHEL-14318]
- vfio: Move the IOMMU_CAP_CACHE_COHERENCY check in __vfio_register_dev() (Alex Williamson) [RHEL-14318]
- vfio: Add VFIO_DEVICE_[AT|DE]TACH_IOMMUFD_PT (Alex Williamson) [RHEL-14318]
- vfio: Add VFIO_DEVICE_BIND_IOMMUFD (Alex Williamson) [RHEL-14318]
- vfio: Avoid repeated user pointer cast in vfio_device_fops_unl_ioctl() (Alex Williamson) [RHEL-14318]
- iommufd: Add iommufd_ctx_from_fd() (Alex Williamson) [RHEL-14318]
- vfio: Test kvm pointer in _vfio_device_get_kvm_safe() (Alex Williamson) [RHEL-14318]
- vfio: Add cdev for vfio_device (Alex Williamson) [RHEL-14318]
- vfio: Move device_del() before waiting for the last vfio_device registration refcount (Alex Williamson) [RHEL-14318]
- vfio: Move vfio_device_group_unregister() to be the first operation in unregister (Alex Williamson) [RHEL-14318]
- vfio-iommufd: Add detach_ioas support for emulated VFIO devices (Alex Williamson) [RHEL-14318]
- iommufd/device: Add iommufd_access_detach() API (Alex Williamson) [RHEL-14318]
- iommufd: Call iopt_area_contig_done() under the lock (Alex Williamson) [RHEL-14318]
- vfio-iommufd: Add detach_ioas support for physical VFIO devices (Alex Williamson) [RHEL-14318]
- vfio: Record devid in vfio_device_file (Alex Williamson) [RHEL-14318]
- vfio-iommufd: Split bind/attach into two steps (Alex Williamson) [RHEL-14318]
- vfio-iommufd: Move noiommu compat validation out of vfio_iommufd_bind() (Alex Williamson) [RHEL-14318]
- vfio: Make vfio_df_open() single open for device cdev path (Alex Williamson) [RHEL-14318]
- vfio: Add cdev_device_open_cnt to vfio_group (Alex Williamson) [RHEL-14318]
- vfio: Block device access via device fd until device is opened (Alex Williamson) [RHEL-14318]
- vfio: Pass struct vfio_device_file * to vfio_device_open/close() (Alex Williamson) [RHEL-14318]
- kvm/vfio: Accept vfio device file from userspace (Alex Williamson) [RHEL-14318]
- kvm/vfio: Prepare for accepting vfio device fd (Alex Williamson) [RHEL-14318]
- vfio: Accept vfio device file in the KVM facing kAPI (Alex Williamson) [RHEL-14318]
- vfio: Refine vfio file kAPIs for KVM (Alex Williamson) [RHEL-14318]
- vfio: Allocate per device file structure (Alex Williamson) [RHEL-14318]
- vfio/pci: Allow passing zero-length fd array in VFIO_DEVICE_PCI_HOT_RESET (Alex Williamson) [RHEL-14318]
- vfio/pci: Copy hot-reset device info to userspace in the devices loop (Alex Williamson) [RHEL-14318]
- vfio/pci: Extend VFIO_DEVICE_GET_PCI_HOT_RESET_INFO for vfio device cdev (Alex Williamson) [RHEL-14318]
- vfio: Add helper to search vfio_device in a dev_set (Alex Williamson) [RHEL-14318]
- vfio: Mark cdev usage in vfio_device (Alex Williamson) [RHEL-14318]
- iommufd: Add helper to retrieve iommufd_ctx and devid (Alex Williamson) [RHEL-14318]
- iommufd: Add iommufd_ctx_has_group() (Alex Williamson) [RHEL-14318]
- iommufd: Reserve all negative IDs in the iommufd xarray (Alex Williamson) [RHEL-14318]
- vfio/pci: Move the existing hot reset logic to be a helper (Alex Williamson) [RHEL-14318]
- vfio/pci: Update comment around group_fd get in vfio_pci_ioctl_pci_hot_reset() (Alex Williamson) [RHEL-14318]
- vfio/mdev: Move the compat_class initialization to module init (Alex Williamson) [RHEL-14318]
- vfio/fsl: Create Kconfig sub-menu (Alex Williamson) [RHEL-14318]
- redhat/configs: Disable CONFIG_VFIO_AMBA (Alex Williamson) [RHEL-14318]
- vfio/platform: Cleanup Kconfig (Alex Williamson) [RHEL-14318]
- vfio/pci: Cleanup Kconfig (Alex Williamson) [RHEL-14318]
- vfio/pci-core: Add capability for AtomicOp completer support (Alex Williamson) [RHEL-14318]
- vfio/pci: Clear VFIO_IRQ_INFO_NORESIZE for MSI-X (Alex Williamson) [RHEL-14318]
- vfio/pci: Support dynamic MSI-X (Alex Williamson) [RHEL-14318]
- vfio/pci: Probe and store ability to support dynamic MSI-X (Alex Williamson) [RHEL-14318]
- vfio/pci: Use bitfield for struct vfio_pci_core_device flags (Alex Williamson) [RHEL-14318]
- vfio/pci: Update stale comment (Alex Williamson) [RHEL-14318]
- vfio/pci: Remove interrupt context counter (Alex Williamson) [RHEL-14318]
- vfio/pci: Use xarray for interrupt context storage (Alex Williamson) [RHEL-14318]
- vfio/pci: Move to single error path (Alex Williamson) [RHEL-14318]
- vfio/pci: Prepare for dynamic interrupt context storage (Alex Williamson) [RHEL-14318]
- vfio/pci: Remove negative check on unsigned vector (Alex Williamson) [RHEL-14318]
- vfio/pci: Consolidate irq cleanup on MSI/MSI-X disable (Alex Williamson) [RHEL-14318]
- vfio/ccw: use struct_size() helper (Alex Williamson) [RHEL-14318]
- vfio/ccw: replace one-element array with flexible-array member (Alex Williamson) [RHEL-14318]
- vfio/type1: check pfn valid before converting to struct page (Alex Williamson) [RHEL-14318]
- docs: kvm: vfio: Suggest KVM_DEV_VFIO_GROUP_ADD vs VFIO_GROUP_GET_DEVICE_FD ordering (Alex Williamson) [RHEL-14318]
- vfio: correct kdoc for ops structures (Alex Williamson) [RHEL-14318]
- vfio/pci: Add DVSEC PCI Extended Config Capability to user visible list. (Alex Williamson) [RHEL-14318]
- vfio: Check the presence for iommufd callbacks in __vfio_register_dev() (Alex Williamson) [RHEL-14318]
- vfio/mdev: Uses the vfio emulated iommufd ops set in the mdev sample drivers (Alex Williamson) [RHEL-14318]
- vfio-iommufd: Make vfio_iommufd_emulated_bind() return iommufd_access ID (Alex Williamson) [RHEL-14318]
- vfio-iommufd: No need to record iommufd_ctx in vfio_device (Alex Williamson) [RHEL-14318]
- iommufd: Create access in vfio_iommufd_emulated_bind() (Alex Williamson) [RHEL-14318]
- iommu/iommufd: Pass iommufd_ctx pointer in iommufd_get_ioas() (Alex Williamson) [RHEL-14318]
- nvme: avoid bogus CRTO values (Maurizio Lombardi) [RHEL-11472]
- nvme-pci: do not set the NUMA node of device if it has none (Maurizio Lombardi) [RHEL-11472]
- nvme: host: hwmon: constify pointers to hwmon_channel_info (Maurizio Lombardi) [RHEL-11472]
- nvmet-tcp: pass iov_len instead of sg->length to bvec_set_page() (Maurizio Lombardi) [RHEL-11472]
- nvme-pci: add NVME_QUIRK_BOGUS_NID for Samsung PM9B1 256G and 512G (Maurizio Lombardi) [RHEL-11472]
- scsi: nvme: zns: Set zone limits before revalidating zones (Maurizio Lombardi) [RHEL-11472]
- nvme: don't reject probe due to duplicate IDs for single-ported PCIe devices (Maurizio Lombardi) [RHEL-11472]
- nvme-fc: fix race between error recovery and creating association (Maurizio Lombardi) [RHEL-11472]
- nvme-fc: return non-zero status code when fails to create association (Maurizio Lombardi) [RHEL-11472]
- nvme: fix parameter check in nvme_fault_inject_init() (Maurizio Lombardi) [RHEL-11472]
- nvme: warn only once for legacy uuid attribute (Maurizio Lombardi) [RHEL-11472]
- nvme: forward port sysfs delete fix (Maurizio Lombardi) [RHEL-11472]
- nvme: skip optional id ctrl csi if it failed (Maurizio Lombardi) [RHEL-11472]
- nvme-core: use nvme_ns_head_multipath instead of ns->head->disk (Maurizio Lombardi) [RHEL-11472]
- nvmet-fcloop: Do not wait on completion when unregister fails (Maurizio Lombardi) [RHEL-11472]
- nvme: Increase block size variable size to 32-bit (Maurizio Lombardi) [RHEL-11472]
- nvme-fcloop: no need to return from void function (Maurizio Lombardi) [RHEL-11472]
- nvmet-auth: remove unnecessary break after goto (Maurizio Lombardi) [RHEL-11472]
- nvmet-auth: remove some dead code (Maurizio Lombardi) [RHEL-11472]
- nvme: move sysfs code to a dedicated sysfs.c file (Maurizio Lombardi) [RHEL-11472]
- nvme-fabrics: check hostid using uuid_equal (Maurizio Lombardi) [RHEL-11472]
- nvme-fabrics: unify common code in admin and io queue connect (Maurizio Lombardi) [RHEL-11472]
- nvmet: reorder fields in 'struct nvmefc_fcp_req' (Maurizio Lombardi) [RHEL-11472]
- nvmet: reorder fields in 'struct nvme_dhchap_queue_context' (Maurizio Lombardi) [RHEL-11472]
- nvmet: reorder fields in 'struct nvmf_ctrl_options' (Maurizio Lombardi) [RHEL-11472]
- nvme: reorder fields in 'struct nvme_ctrl' (Maurizio Lombardi) [RHEL-11472]
- nvmet: reorder fields in 'struct nvmet_sq' (Maurizio Lombardi) [RHEL-11472]
- nvme-fabrics: add queue setup helpers (Maurizio Lombardi) [RHEL-11472]
- nvme-pci: cleaning up nvme_pci_init_request (Maurizio Lombardi) [RHEL-11472]
- nvme-rdma: fix typo in comment (Maurizio Lombardi) [RHEL-11472]
- nvme-tcp: fix a possible UAF when failing to allocate an io queue (Maurizio Lombardi) [RHEL-11472]
- nvme-pci: mark Lexar NM760 as IGNORE_DEV_SUBNQN (Maurizio Lombardi) [RHEL-11472]
- nvme-tcp: fix nvme_tcp_term_pdu to match spec (Maurizio Lombardi) [RHEL-11472]
- nvme: send Identify with CNS 06h only to I/O controllers (Maurizio Lombardi) [RHEL-11472]
- nvmet-tcp: Fix a possible UAF in queue intialization setup (John Meneghini) [RHEL-11488 RHEL-11492] {CVE-2023-5178}
- sched: remove wait bookmarks (Carlos Maiolino) [RHEL-5335]
- filemap: remove use of wait bookmarks (Carlos Maiolino) [RHEL-5335]
- ext4: fix rec_len verify error (Carlos Maiolino) [RHEL-5335]
- ext4: remove unused parameter from ext4_mb_new_blocks_simple() (Carlos Maiolino) [RHEL-5335]
- ext4: fix wrong unit use in ext4_mb_new_blocks (Carlos Maiolino) [RHEL-5335]
- ext4: fix wrong unit use in ext4_mb_clear_bb (Carlos Maiolino) [RHEL-5335]
- ext4: treat stripe in block unit (Carlos Maiolino) [RHEL-5335]
- ext4: fix wrong unit use in ext4_mb_find_by_goal (Carlos Maiolino) [RHEL-5335]
- ext4: fix wrong unit use in ext4_mb_normalize_request (Carlos Maiolino) [RHEL-5335]
- ext4: only check dquot_initialize_needed() when debugging (Carlos Maiolino) [RHEL-5335]
- Revert "ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled" (Carlos Maiolino) [RHEL-5335]
- Revert "ext4: remove ac->ac_found > sbi->s_mb_min_to_scan dead check in ext4_mb_check_limits" (Carlos Maiolino) [RHEL-5335]
- ext4: enable the lazy init thread when remounting read/write (Carlos Maiolino) [RHEL-5335]
- ext4: fix fsync for non-directories (Carlos Maiolino) [RHEL-5335]
- ext4: add lockdep annotations for i_data_sem for ea_inode's (Carlos Maiolino) [RHEL-5335]
- ext4: disallow ea_inodes with extended attributes (Carlos Maiolino) [RHEL-5335]
- ext4: set lockdep subclass for the ea_inode in ext4_xattr_inode_cache_find() (Carlos Maiolino) [RHEL-5335]
- ext4: add EA_INODE checking to ext4_iget() (Carlos Maiolino) [RHEL-5335]
- ext4: bail out of ext4_xattr_ibody_get() fails for any reason (Carlos Maiolino) [RHEL-5335]
- ext4: add bounds checking in get_max_inline_xattr_value_size() (Carlos Maiolino) [RHEL-5335]
- ext4: add indication of ro vs r/w mounts in the mount message (Carlos Maiolino) [RHEL-5335]
- ext4: fix deadlock when converting an inline directory in nojournal mode (Carlos Maiolino) [RHEL-5335]
- ext4: improve error recovery code paths in __ext4_remount() (Carlos Maiolino) [RHEL-5335]
- ext4: improve error handling from ext4_dirhash() (Carlos Maiolino) [RHEL-5335]
- ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled (Carlos Maiolino) [RHEL-5335]
- ext4: check iomap type only if ext4_iomap_begin() does not fail (Carlos Maiolino) [RHEL-5335]
- ext4: avoid a potential slab-out-of-bounds in ext4_group_desc_csum (Carlos Maiolino) [RHEL-5335]
- ext4: fix data races when using cached status extents (Carlos Maiolino) [RHEL-5335]
- ext4: avoid deadlock in fs reclaim with page writeback (Carlos Maiolino) [RHEL-5335]
- ext4: fix invalid free tracking in ext4_xattr_move_to_block() (Carlos Maiolino) [RHEL-5335]
- ext4: fix lockdep warning when enabling MMP (Carlos Maiolino) [RHEL-5335]
- ext4: fix WARNING in mb_find_extent (Carlos Maiolino) [RHEL-5335]
- ext4: reflect error codes from ext4_multi_mount_protect() to its callers (Carlos Maiolino) [RHEL-5335]
- ext4: fix use-after-free read in ext4_find_extent for bigalloc + inline (Carlos Maiolino) [RHEL-5335]
- ext4: fix i_disksize exceeding i_size problem in paritally written case (Carlos Maiolino) [RHEL-5335]
- jdb2: Don't refuse invalidation of already invalidated buffers (Carlos Maiolino) [RHEL-5335]
- ext4: fix BUG in ext4_mb_new_inode_pa() due to overflow (Carlos Maiolino) [RHEL-5335]
- ext4: add two helper functions extent_logical_end() and pa_logical_end() (Carlos Maiolino) [RHEL-5335]
- ext4: fix rbtree traversal bug in ext4_mb_use_preallocated (Carlos Maiolino) [RHEL-5335]
- ext4: Remove unused extern variables declaration (Carlos Maiolino) [RHEL-5335]
- ext4: mballoc: Remove useless setting of ac_criteria (Carlos Maiolino) [RHEL-5335]
- ext4: try all groups in ext4_mb_new_blocks_simple (Carlos Maiolino) [RHEL-5335]
- ext4: remove ext4_block_group and ext4_block_group_offset declaration (Carlos Maiolino) [RHEL-5335]
- ext4: add EXT4_MB_HINT_GOAL_ONLY test in ext4_mb_use_preallocated (Carlos Maiolino) [RHEL-5335]
- ext4: fix unit mismatch in ext4_mb_new_blocks_simple (Carlos Maiolino) [RHEL-5335]
- ext4: Remove the logic to trim inode PAs (Carlos Maiolino) [RHEL-5335]
- ext4: Use rbtrees to manage PAs instead of inode i_prealloc_list (Carlos Maiolino) [RHEL-5335]
- ext4: Convert pa->pa_inode_list and pa->pa_obj_lock into a union (Carlos Maiolino) [RHEL-5335]
- ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa() (Carlos Maiolino) [RHEL-5335]
- ext4: Abstract out overlap fix/check logic in ext4_mb_normalize_request() (Carlos Maiolino) [RHEL-5335]
- ext4: Move overlap assert logic into a separate function (Carlos Maiolino) [RHEL-5335]
- ext4: Refactor code in ext4_mb_normalize_request() and ext4_mb_use_preallocated() (Carlos Maiolino) [RHEL-5335]
- ext4: Refactor code related to freeing PAs (Carlos Maiolino) [RHEL-5335]
- ext4: Stop searching if PA doesn't satisfy non-extent file (Carlos Maiolino) [RHEL-5335]
- ext4: convert some BUG_ON's in mballoc to use WARN_RATELIMITED instead (Carlos Maiolino) [RHEL-5335]
- ext4: avoid unnecessary pointer dereference in ext4_mb_normalize_request (Carlos Maiolino) [RHEL-5335]
- ext4: fix typos in mballoc (Carlos Maiolino) [RHEL-5335]
- ext4: simplify calculation of blkoff in ext4_mb_new_blocks_simple (Carlos Maiolino) [RHEL-5335]
- ext4: remove comment code ext4_discard_preallocations (Carlos Maiolino) [RHEL-5335]
- ext4: remove repeat assignment to ac_f_ex (Carlos Maiolino) [RHEL-5335]
- ext4: remove unnecessary goto in ext4_mb_mark_diskspace_used (Carlos Maiolino) [RHEL-5335]
- ext4: remove unnecessary count2 in ext4_free_data_in_buddy (Carlos Maiolino) [RHEL-5335]
- ext4: remove unnecessary exit_meta_group_info tag (Carlos Maiolino) [RHEL-5335]
- ext4: use best found when complex scan of group finishs (Carlos Maiolino) [RHEL-5335]
- ext4: remove ac->ac_found > sbi->s_mb_min_to_scan dead check in ext4_mb_check_limits (Carlos Maiolino) [RHEL-5335]
- ext4: remove dead check in mb_buddy_mark_free (Carlos Maiolino) [RHEL-5335]
- ext4: remove unnecessary check in ext4_mb_new_blocks (Carlos Maiolino) [RHEL-5335]
- ext4: remove unnecessary e4b->bd_buddy_page check in ext4_mb_load_buddy_gfp (Carlos Maiolino) [RHEL-5335]
- ext4: Remove unnecessary release when memory allocation failed in ext4_mb_init_cache (Carlos Maiolino) [RHEL-5335]
- ext4: remove unused return value of ext4_mb_try_best_found and ext4_mb_free_metadata (Carlos Maiolino) [RHEL-5335]
- ext4: add missed brelse in ext4_free_blocks_simple (Carlos Maiolino) [RHEL-5335]
- ext4: protect pa->pa_free in ext4_discard_allocated_blocks (Carlos Maiolino) [RHEL-5335]
- ext4: correct start of used group pa for debug in ext4_mb_use_group_pa (Carlos Maiolino) [RHEL-5335]
- ext4: correct calculation of s_mb_preallocated (Carlos Maiolino) [RHEL-5335]
- ext4: get correct ext4_group_info in ext4_mb_prefetch_fini (Carlos Maiolino) [RHEL-5335]
- ext4: allow to find by goal if EXT4_MB_HINT_GOAL_ONLY is set (Carlos Maiolino) [RHEL-5335]
- ext4: set goal start correctly in ext4_mb_normalize_request (Carlos Maiolino) [RHEL-5335]
- ext4: remove unused group parameter in ext4_block_bitmap_csum_set (Carlos Maiolino) [RHEL-5335]
- ext4: remove unused group parameter in ext4_block_bitmap_csum_verify (Carlos Maiolino) [RHEL-5335]
- ext4: remove unused group parameter in ext4_inode_bitmap_csum_set (Carlos Maiolino) [RHEL-5335]
- ext4: remove unused group parameter in ext4_inode_bitmap_csum_verify (Carlos Maiolino) [RHEL-5335]
- ext4: improve inode table blocks counting in ext4_num_overhead_clusters (Carlos Maiolino) [RHEL-5335]
- ext4: stop trying to verify just initialized bitmap in ext4_read_block_bitmap_nowait (Carlos Maiolino) [RHEL-5335]
- ext4: remove stale comment in ext4_init_block_bitmap (Carlos Maiolino) [RHEL-5335]
- Revert "ext4: remove unnecessary check in ext4_bg_num_gdb_nometa" (Carlos Maiolino) [RHEL-5335]
- ext4: remove unnecessary check in ext4_bg_num_gdb_nometa (Carlos Maiolino) [RHEL-5335]
- ext4: call ext4_bg_num_gdb_[no]meta directly in ext4_num_base_meta_clusters (Carlos Maiolino) [RHEL-5335]
- ext4: correct validation check of inode table in ext4_valid_block_bitmap (Carlos Maiolino) [RHEL-5335]
- ext4: properly handle error of ext4_init_block_bitmap in ext4_read_block_bitmap_nowait (Carlos Maiolino) [RHEL-5335]
- ext4: Move mpage_page_done() calls after error handling (Carlos Maiolino) [RHEL-5335]
- ext4: Move page unlocking out of mpage_submit_page() (Carlos Maiolino) [RHEL-5335]
- ext4: Don't unlock page in ext4_bio_write_page() (Carlos Maiolino) [RHEL-5335]
- ext4: Mark page for delayed dirtying only if it is pinned (Carlos Maiolino) [RHEL-5335]
- ext4: Use nr_to_write directly in mpage_prepare_extent_to_map() (Carlos Maiolino) [RHEL-5335]
- ext4: Update stale comment about write constraints (Carlos Maiolino) [RHEL-5335]
- ext4: convert mext_page_double_lock() to mext_folio_double_lock() (Carlos Maiolino) [RHEL-5335]
- ext4: simplify ext4_readpage_limit() (Carlos Maiolino) [RHEL-5335]
- ext4: fix inode leak in ext4_xattr_inode_create() on an error path (Carlos Maiolino) [RHEL-5335]
- ext4: avoid unaccounted block allocation when expanding inode (Carlos Maiolino) [RHEL-5335]
- ext4: initialize quota before expanding inode in setproject ioctl (Carlos Maiolino) [RHEL-5335]
- ext4: stop providing .writepage hook (Carlos Maiolino) [RHEL-5335]
- mm: export buffer_migrate_folio_norefs() (Carlos Maiolino) [RHEL-5335]
- ext4: switch to using write_cache_pages() for data=journal writeout (Carlos Maiolino) [RHEL-5335]
- jbd2: switch jbd2_submit_inode_data() to use fs-provided hook for data writeout (Carlos Maiolino) [RHEL-5335]
- ext4: switch to using ext4_do_writepages() for ordered data writeout (Carlos Maiolino) [RHEL-5335]
- ext4: move percpu_rwsem protection into ext4_writepages() (Carlos Maiolino) [RHEL-5335]
- ext4: provide ext4_do_writepages() (Carlos Maiolino) [RHEL-5335]
- ext4: add support for writepages calls that cannot map blocks (Carlos Maiolino) [RHEL-5335]
- ext4: drop pointless IO submission from ext4_bio_write_page() (Carlos Maiolino) [RHEL-5335]
- ext4: remove nr_submitted from ext4_bio_write_page() (Carlos Maiolino) [RHEL-5335]
- ext4: remove unneeded check of nr_to_submit (Carlos Maiolino) [RHEL-5335]
- ext4: move keep_towrite handling to ext4_bio_write_page() (Carlos Maiolino) [RHEL-5335]
- ext4: handle redirtying in ext4_bio_write_page() (Carlos Maiolino) [RHEL-5335]
- ext4: make ext4_mb_initialize_context return void (Carlos Maiolino) [RHEL-5335]
- ext4: fix delayed allocation bug in ext4_clu_mapped for bigalloc + inline (Carlos Maiolino) [RHEL-5335]
- ext4: don't fail GETFSUUID when the caller provides a long buffer (Carlos Maiolino) [RHEL-5335]
- ext4: dont return EINVAL from GETFSUUID when reporting UUID length (Carlos Maiolino) [RHEL-5335]
- ext4: fix error code return to user-space in ext4_get_branch() (Carlos Maiolino) [RHEL-5335]
- ext4: replace kmem_cache_create with KMEM_CACHE (Carlos Maiolino) [RHEL-5335]
- ext4: correct inconsistent error msg in nojournal mode (Carlos Maiolino) [RHEL-5335]
- ext4: print file system UUID on mount, remount and unmount (Carlos Maiolino) [RHEL-5335]
- ext4: init quota for 'old.inode' in 'ext4_rename' (Carlos Maiolino) [RHEL-5335]
- ext4: simplify fast-commit CRC calculation (Carlos Maiolino) [RHEL-5335]
- ext4: fix use-after-free in ext4_orphan_cleanup (Carlos Maiolino) [RHEL-5335]
- ext4: don't allow journal inode to have encrypt flag (Carlos Maiolino) [RHEL-5335]
- ext4: fix bug_on in __es_tree_search caused by bad quota inode (Carlos Maiolino) [RHEL-5335]
- ext4: fix bug_on in __es_tree_search caused by bad boot loader inode (Carlos Maiolino) [RHEL-5335]
- ext4: add EXT4_IGET_BAD flag to prevent unexpected bad inode (Carlos Maiolino) [RHEL-5335]
- ext4: add helper to check quota inums (Carlos Maiolino) [RHEL-5335]
- ext4: remove trailing newline from ext4_msg() message (Carlos Maiolino) [RHEL-5335]
- ext4: split ext4_journal_start trace for debug (Carlos Maiolino) [RHEL-5335]
- ext4: check the return value of ext4_xattr_inode_dec_ref() (Carlos Maiolino) [RHEL-5335]
- ext4: remove redundant variable err (Carlos Maiolino) [RHEL-5335]
- ext4: add inode table check in __ext4_get_inode_loc to aovid possible infinite loop (Carlos Maiolino) [RHEL-5335]
- fs/ext4: replace ternary operator with min()/max() and min_t() (Carlos Maiolino) [RHEL-5335]
- ext4: check and assert if marking an no_delete evicting inode dirty (Carlos Maiolino) [RHEL-5335]
- netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c (Florian Westphal) [RHEL-8437] {CVE-2023-42753}
- arm64: dts: imx8mq: Deduplicate PCIe clock-names property (Steve Best) [RHEL-2711]
- arm64: dts: imx8mm-verdin: Do not power down eth-phy (Steve Best) [RHEL-2711]
- arm64: dts: imx8mp: fix address length for LCDIF2 (Steve Best) [RHEL-2711]
- arm64: dts: imx8mp: Fix LCDIF2 node clock order (Steve Best) [RHEL-2711]
- arm64: dts: imx8mp: Drop simple-bus from fsl,imx8mp-media-blk-ctrl (Steve Best) [RHEL-2711]
- Revert "arm64: dts: ls1028a: sl28: get MAC addresses from VPD" (Steve Best) [RHEL-2711]
- arm64: dts: imx8mm: Fix pad control for UART1_DTE_RX (Steve Best) [RHEL-2711]
- arm64: dts: verdin-imx8mp: unify gpio-key node name (Steve Best) [RHEL-2711]
- arm64: dts: ls1028a: sl28: get MAC addresses from VPD (Steve Best) [RHEL-2711]
- arm64: dts: imx8mp: Add LCDIF2 & LDB nodes (Steve Best) [RHEL-2711]
- arm64: dts: imx8mp: use syscon for iomuxc-gpr (Steve Best) [RHEL-2711]
- arm64: dts: imx8mn: update iomuxc-gpr node name (Steve Best) [RHEL-2711]
- arm64: dts: imx8mm: correct iomuxc-gpr compatible (Steve Best) [RHEL-2711]
- net: tun: fix bugs for oversize packet when napi frags enabled (Ricardo Robaina) [RHEL-7186 RHEL-7264] {CVE-2023-3812}
- serial: fsl_lpuart: Reset prior to registration (Steve Best) [RHEL-2715]
- tty: serial: fsl_lpuart: don't break the on-going transfer when global reset (Steve Best) [RHEL-2715]
- tty: serial: fsl_lpuart: count tty buffer overruns (Steve Best) [RHEL-2715]
- tty: serial: fsl_lpuart: Add i.MXRT1050 support (Steve Best) [RHEL-2715]
- tty: serial: fsl_lpuart: add timeout for wait_event_interruptible in .shutdown() (Steve Best) [RHEL-2715]
- Revert "tty: serial: fsl_lpuart: drop earlycon entry for i.MX8QXP" (Steve Best) [RHEL-2715]
- tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp (Steve Best) [RHEL-2715]
- tty: serial: fsl_lpuart: enable two stop bits for lpuart32 (Steve Best) [RHEL-2715]
- tty: serial: fsl_lpuart: fix the wrong mapbase value (Steve Best) [RHEL-2715]
- tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callback (Steve Best) [RHEL-2715]
- Bluetooth: hci_sync: Fix handling of HCI_QUIRK_STRICT_DUPLICATE_FILTER (Bastien Nocera) [RHEL-2530]
- Bluetooth: Fix hci_link_tx_to RCU lock usage (Bastien Nocera) [RHEL-2530]
- redhat/configs: Disable NXP Bluetooth driver by default (Bastien Nocera) [RHEL-2530]
- New configs in net/bluetooth (Bastien Nocera) [RHEL-2530]
- New configs in drivers/bluetooth (Bastien Nocera) [RHEL-2530]
- PCI: Add locking to RMW PCI Express Capability Register accessors (Bastien Nocera) [RHEL-2530]
- Bluetooth: MGMT: Use correct address for memcpy() (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor() (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_event: call disconnect callback before deleting conn (Bastien Nocera) [RHEL-2530]
- Bluetooth: use RCU for hci_conn_params and iterate safely in hci_sync (Bastien Nocera) [RHEL-2530]
- virtio_bt: call scheduler when we free unused buffs (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_conn: Use kmemdup() to replace kzalloc + memcpy (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Add MT7922 bluetooth ID for the Asus Ally (Bastien Nocera) [RHEL-2530]
- Bluetooth: MGMT: Fix marking SCAN_RSP as not connectable (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_event: fix Set CIG Parameters error status handling (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_bcm: do not mark valid bd_addr as invalid (Bastien Nocera) [RHEL-2530]
- Bluetooth: fix use-bdaddr-property quirk (Bastien Nocera) [RHEL-2530]
- Bluetooth: fix invalid-bdaddr quirk for non-persistent setup (Bastien Nocera) [RHEL-2530]
- Bluetooth: L2CAP: Fix use-after-free in l2cap_sock_ready_cb (Bastien Nocera) [RHEL-2530 RHEL-2717] {CVE-2023-40283}
- Bluetooth: L2CAP: Fix use-after-free (Bastien Nocera) [RHEL-2530]
- Bluetooth: btqca: use le32_to_cpu for ver.soc_id (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Add device 6655:8771 to device tables (Bastien Nocera) [RHEL-2530]
- dt-bindings: net: bluetooth: nxp: Add missing type for "fw-init-baudrate" (Bastien Nocera) [RHEL-2530]
- Bluetooth: Fix potential use-after-free when clear keys (Bastien Nocera) [RHEL-2530]
- Bluetooth: HCI: Introduce HCI_QUIRK_BROKEN_LE_CODED (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_conn: fail SCO/ISO via hci_conn_failed if ACL gone early (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_conn: avoid checking uninitialized CIG/CIS ids (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_conn: Fix not allowing valid CIS ID (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_conn: Fix modifying handle while aborting (Bastien Nocera) [RHEL-2530]
- Bluetooth: ISO: handle bound CIS cleanup via hci_conn (Bastien Nocera) [RHEL-2530]
- Bluetooth: ISO: Notify user space about failed bis connections (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_conn: Always allocate unique handles (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_sync: Fix not handling ISO_LINK in hci_abort_conn_sync (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_conn: Consolidate code for aborting connections (Bastien Nocera) [RHEL-2530]
- Bluetooth: ISO: Support multiple BIGs (Bastien Nocera) [RHEL-2530]
- Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C (Bastien Nocera) [RHEL-2530]
- Bluetooth: msft: Extended monitor tracking by address filter (Bastien Nocera) [RHEL-2530]
- Bluetooth: btrtl: Correct the length of the HCI command for drop fw (Bastien Nocera) [RHEL-2530]
- Bluetooth: btrtl: Add Realtek devcoredump support (Bastien Nocera) [RHEL-2530]
- Bluetooth: btrtl: Add missing MODULE_FIRMWARE declarations (Bastien Nocera) [RHEL-2530]
- Bluetooth: ISO: do not emit new LE Create CIS if previous is pending (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_event: Fix parsing of CIS Established Event (Bastien Nocera) [RHEL-2530]
- Bluetooth: ISO: Rework sync_interval to be sync_factor (Bastien Nocera) [RHEL-2530]
- Bluetooth: ISO: Add support for connecting multiple BISes (Bastien Nocera) [RHEL-2530]
- Bluetooth: ISO: use hci_sync for setting CIG parameters (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Fix bluetooth on Intel Macbook 2014 (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_conn: return ERR_PTR instead of NULL when there is no link (Bastien Nocera) [RHEL-2530]
- Bluetooth: SCO: fix sco_conn related locking and validity issues (Bastien Nocera) [RHEL-2530]
- Bluetooth: coredump: fix building with coredump disabled (Bastien Nocera) [RHEL-2530]
- Bluetooth: ISO: fix iso_conn related locking and validity issues (Bastien Nocera) [RHEL-2530]
- Bluetooth: L2CAP: Add missing checks for invalid DCID (Bastien Nocera) [RHEL-2530]
- Bluetooth: ISO: use correct CIS order in Set CIG Parameters event (Bastien Nocera) [RHEL-2530]
- Bluetooth: ISO: don't try to remove CIG if there are bound CIS left (Bastien Nocera) [RHEL-2530]
- Bluetooth: Fix l2cap_disconnect_req deadlock (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_qca: fix debugfs registration (Bastien Nocera) [RHEL-2530]
- Bluetooth: fix debugfs registration (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_sync: add lock to protect HCI_UNREGISTER (Bastien Nocera) [RHEL-2530]
- Bluetooth: Fix use-after-free in hci_remove_ltk/hci_remove_irk (Bastien Nocera) [RHEL-2530]
- Bluetooth: ISO: Fix CIG auto-allocation to select configurable CIG (Bastien Nocera) [RHEL-2530]
- Bluetooth: ISO: consider right CIS when removing CIG at cleanup (Bastien Nocera) [RHEL-2530]
- Bluetooth: btnxpuart: Fix compiler warnings (Bastien Nocera) [RHEL-2530]
- Bluetooth: Unlink CISes when LE disconnects in hci_conn_del (Bastien Nocera) [RHEL-2530]
- Bluetooth: Fix UAF in hci_conn_hash_flush again (Bastien Nocera) [RHEL-2530]
- Bluetooth: Refcnt drop must be placed last in hci_conn_unlink (Bastien Nocera) [RHEL-2530]
- Bluetooth: Fix potential double free caused by hci_conn_unlink (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_sync: Only allow hci_cmd_sync_queue if running (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Add WCN6855 devcoredump support (Bastien Nocera) [RHEL-2530]
- Bluetooth: btnxpuart: Enable flow control before checking boot signature (Bastien Nocera) [RHEL-2530]
- Bluetooth: Cancel sync command before suspend and power off (Bastien Nocera) [RHEL-2530]
- Bluetooth: btrtl: Add the support for RTL8851B (Bastien Nocera) [RHEL-2530]
- Bluetooth: btnxpuart: Fix sparse warnings (Bastien Nocera) [RHEL-2530]
- Bluetooth: btrtl: Firmware format v2 support (Bastien Nocera) [RHEL-2530]
- Bluetooth: Devcoredump: Fix storing u32 without specifying byte order issue (Bastien Nocera) [RHEL-2530]
- Bluetooth: L2CAP: fix "bad unlock balance" in l2cap_disconnect_rsp (Bastien Nocera) [RHEL-2530]
- bluetooth: Add cmd validity checks at the start of hci_sock_ioctl() (Bastien Nocera) [RHEL-2530]
- Revert "Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work" (Bastien Nocera) [RHEL-2530]
- Bluetooth: Add new quirk for broken set random RPA timeout for ATS2851 (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_conn: Fix not matching by CIS ID (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_conn: Add support for linking multiple hcon (Bastien Nocera) [RHEL-2530]
- Bluetooth: vhci: Fix info leak in force_devcd_write() (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_qca: mark OF related data as maybe unused (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_conn: remove extra line in hci_le_big_create_sync (Bastien Nocera) [RHEL-2530]
- Bluetooth: fix inconsistent indenting (Bastien Nocera) [RHEL-2530]
- Bluetooth: btnxpuart: No need to check the received bootloader signature (Bastien Nocera) [RHEL-2530]
- Bluetooth: btnxpuart: Disable Power Save feature on startup (Bastien Nocera) [RHEL-2530]
- Bluetooth: btnxpuart: Deasset UART break before closing serdev device (Bastien Nocera) [RHEL-2530]
- Bluetooth: btnxpuart: Add support to download helper FW file for w8997 (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_bcm: Add Acer Iconia One 7 B1-750 to the bcm_broken_irq_dmi_table (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_bcm: Add Lenovo Yoga Tablet 2 830 / 1050 to the bcm_broken_irq_dmi_table (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_bcm: Limit bcm43430a0 / bcm43430a1 baudrate to 2000000 (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_bcm: Fall back to getting bdaddr from EFI if not set (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_h5: Complements reliable packet processing logic (Bastien Nocera) [RHEL-2530]
- Bluetooth: Enable all supported LE PHY by default (Bastien Nocera) [RHEL-2530]
- Bluetooth: Split bt_iso_qos into dedicated structures (Bastien Nocera) [RHEL-2530]
- Bluetooth: btintel: Add Intel devcoredump support (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Add btusb devcoredump support (Bastien Nocera) [RHEL-2530]
- Bluetooth: Add vhci devcoredump support (Bastien Nocera) [RHEL-2530]
- Bluetooth: Add support for hci devcoredump (Bastien Nocera) [RHEL-2530]
- Bluetooth: btintel: Add LE States quirk support (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6855 (Bastien Nocera) [RHEL-2530]
- Bluetooth: btrtl: check for NULL in btrtl_set_quirks() (Bastien Nocera) [RHEL-2530]
- bluetooth: Add device 13d3:3571 to device tables (Bastien Nocera) [RHEL-2530]
- bluetooth: Add device 0bda:887b to device tables (Bastien Nocera) [RHEL-2530]
- Bluetooth: NXP: select CONFIG_CRC8 (Bastien Nocera) [RHEL-2530]
- Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets (Bastien Nocera) [RHEL-2530]
- dt-bindings: net: bluetooth: Add NXP bluetooth support (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_ldisc: Fix tty_set_termios() return value assumptions (Bastien Nocera) [RHEL-2530]
- Bluetooth: Improve support for Actions Semi ATS2851 based devices (Bastien Nocera) [RHEL-2530]
- Bluetooth: btrtl: add support for the RTL8723CS (Bastien Nocera) [RHEL-2530]
- Bluetooth: Add new quirk for broken local ext features page 2 (Bastien Nocera) [RHEL-2530]
- Bluetooth: btmtkuart: mark OF related data as maybe unused (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_qca: mark OF related data as maybe unused (Bastien Nocera) [RHEL-2530]
- Bluetooth: btmrvl_sdio: mark OF related data as maybe unused (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_ll: drop of_match_ptr for ID table (Bastien Nocera) [RHEL-2530]
- Bluetooth: L2CAP: Delay identity address updates (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_sync: Remove duplicate statement (Bastien Nocera) [RHEL-2530]
- Bluetooth: Convert MSFT filter HCI cmd to hci_sync (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_sync: Don't wait peer's reply when powering off (Bastien Nocera) [RHEL-2530]
- Bluetooth: Add VID/PID 0489/e0e4 for MediaTek MT7922 (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_h5: btrtl: Add support for RTL8821CS (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Add new PID/VID 04ca:3801 for MT7663 (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_sync: Fix smatch warning (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_core: Make hci_conn_hash_add append to the list (Bastien Nocera) [RHEL-2530]
- Bluetooth: btrtl: Add support for RTL8852BS (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_mrvl: Add serdev support for 88W8997 (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_mrvl: use maybe_unused macro for device tree ids (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Do not require hardcoded interface numbers (Bastien Nocera) [RHEL-2530]
- Bluetooth: MGMT: Use BIT macro when defining bitfields (Bastien Nocera) [RHEL-2530]
- Bluetooth: L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp} (Bastien Nocera) [RHEL-2530]
- Bluetooth: Set ISO Data Path on broadcast sink (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_conn: Fix possible UAF (Bastien Nocera) [RHEL-2530]
- Bluetooth: SCO: Fix possible circular locking dependency sco_sock_getsockopt (Bastien Nocera) [RHEL-2530]
- Bluetooth: SCO: Fix possible circular locking dependency on sco_connect_cfm (Bastien Nocera) [RHEL-2530]
- bluetooth: btbcm: Fix logic error in forming the board name. (Bastien Nocera) [RHEL-2530]
- Bluetooth: Fix race condition in hidp_session_thread (Bastien Nocera) [RHEL-2530]
- Bluetooth: Fix printing errors if LE Connection times out (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_conn: Fix not cleaning up on LE Connection failure (Bastien Nocera) [RHEL-2530]
- Bluetooth: HCI: Fix global-out-of-bounds (Bastien Nocera) [RHEL-2530 RHEL-2556] {CVE-2023-28866}
- Bluetooth: mgmt: Fix MGMT add advmon with RSSI command (Bastien Nocera) [RHEL-2530]
- Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work (Bastien Nocera) [RHEL-2530]
- Bluetooth: L2CAP: Fix responding with wrong PDU type (Bastien Nocera) [RHEL-2530]
- Bluetooth: btqcomsmd: Fix command timeout after setting BD address (Bastien Nocera) [RHEL-2530]
- Bluetooth: btinel: Check ACPI handle for NULL before accessing (Bastien Nocera) [RHEL-2530]
- Bluetooth: Remove "Power-on" check from Mesh feature (Bastien Nocera) [RHEL-2530]
- Bluetooth: Fix race condition in hci_cmd_sync_clear (Bastien Nocera) [RHEL-2530]
- Bluetooth: btintel: Iterate only bluetooth device ACPI entries (Bastien Nocera) [RHEL-2530]
- Bluetooth: ISO: fix timestamped HCI ISO data packet parsing (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Remove detection of ISO packets over bulk (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packet (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_sync: Resume adv with no RPA when active scan (Bastien Nocera) [RHEL-2530]
- Bluetooth: btintel: Set Per Platform Antenna Gain(PPAG) (Bastien Nocera) [RHEL-2530]
- Bluetooth: Make sure LE create conn cancel is sent when timeout (Bastien Nocera) [RHEL-2530]
- Bluetooth: Free potentially unfreed SCO connection (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_qca: get wakeup status from serdev device handle (Bastien Nocera) [RHEL-2530]
- Bluetooth: L2CAP: Fix potential user-after-free (Bastien Nocera) [RHEL-2530]
- Bluetooth: MGMT: add CIS feature bits to controller information (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_conn: Refactor hci_bind_bis() since it always succeeds (Bastien Nocera) [RHEL-2530]
- Bluetooth: HCI: Replace zero-length arrays with flexible-array members (Bastien Nocera) [RHEL-2530]
- Bluetooth: qca: Fix sparse warnings (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Add VID:PID 13d3:3529 for Realtek RTL8821CE (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Add new PID/VID 0489:e0f2 for MT7921 (Bastien Nocera) [RHEL-2530]
- Bluetooth: Fix issue with Actions Semi ATS2851 based devices (Bastien Nocera) [RHEL-2530]
- Bluetooth: Use crypto_wait_req (Bastien Nocera) [RHEL-2530]
- Bluetooth: Fix possible deadlock in rfcomm_sk_state_change (Bastien Nocera) [RHEL-2530]
- Bluetooth: ISO: Fix possible circular locking dependency (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_event: Fix Invalid wait context (Bastien Nocera) [RHEL-2530]
- Bluetooth: ISO: Fix possible circular locking dependency (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_sync: fix memory leak in hci_update_adv_data() (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_qca: Fix driver shutdown on closed serdev (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_conn: Fix memory leaks (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_sync: Fix use HCI_OP_LE_READ_BUFFER_SIZE_V2 (Bastien Nocera) [RHEL-2530]
- Bluetooth: Fix a buffer overflow in mgmt_mesh_add() (Bastien Nocera) [RHEL-2530]
- Bluetooth: Wait for HCI_OP_WRITE_AUTH_PAYLOAD_TO to complete (Bastien Nocera) [RHEL-2530]
- Bluetooth: ISO: Avoid circular locking dependency (Bastien Nocera) [RHEL-2530]
- Bluetooth: RFCOMM: don't call kfree_skb() under spin_lock_irqsave() (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_core: don't call kfree_skb() under spin_lock_irqsave() (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_bcsp: don't call kfree_skb() under spin_lock_irqsave() (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_h5: don't call kfree_skb() under spin_lock_irqsave() (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_ll: don't call kfree_skb() under spin_lock_irqsave() (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_qca: don't call kfree_skb() under spin_lock_irqsave() (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: don't call kfree_skb() under spin_lock_irqsave() (Bastien Nocera) [RHEL-2530]
- Bluetooth: btintel: Fix missing free skb in btintel_setup_combined() (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_conn: Fix crash on hci_create_cis_sync (Bastien Nocera) [RHEL-2530]
- Bluetooth: btintel: Fix existing sparce warnings (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Fix existing sparce warning (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Fix new sparce warnings (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Add a new PID/VID 13d3/3549 for RTL8822CU (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0cb8:0xc559 (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Add a new VID/PID 0489/e0f2 for MT7922 (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_bcm4377: Fix missing pci_disable_device() on error in bcm4377_probe() (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Add Realtek 8761BUV support ID 0x2B89:0x8761 (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boards (Bastien Nocera) [RHEL-2530]
- Bluetooth: Add quirk to disable MWS Transport Configuration (Bastien Nocera) [RHEL-2530]
- Bluetooth: Add quirk to disable extended scanning (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_event: Ignore reserved bits in LE Extended Adv Report (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_bcm: Add CYW4373A0 support (Bastien Nocera) [RHEL-2530]
- Bluetooth: Use kzalloc instead of kmalloc/memset (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Add more device IDs for WCN6855 (Bastien Nocera) [RHEL-2530]
- Bluetooth: Fix EALREADY and ELOOP cases in bt_status() (Bastien Nocera) [RHEL-2530]
- Bluetooth: Add CONFIG_BT_LE_L2CAP_ECRED (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Default CONFIG_BT_HCIBTUSB_POLL_SYNC=y (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Add CONFIG_BT_HCIBTUSB_POLL_SYNC (Bastien Nocera) [RHEL-2530]
- virtio_bt: Fix alignment in configuration struct (Bastien Nocera) [RHEL-2530]
- Bluetooth: MGMT: Fix error report for ADD_EXT_ADV_PARAMS (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_core: fix error handling in hci_register_dev() (Bastien Nocera) [RHEL-2530]
- Bluetooth: Use kzalloc instead of kmalloc/memset (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_qca: only assign wakeup with serial port support (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_conn: use HCI dst_type values also for BIS (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Ignore zero length of USB packets on ALT 6 for specific chip (Bastien Nocera) [RHEL-2530]
- Bluetooth: btrtl: Add btrealtek data struct (Bastien Nocera) [RHEL-2530]
- Bluetooth: virtio_bt: fix device removal (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_sync: cancel cmd_timer if hci_open failed (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_sync: Fix not able to set force_static_address (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_sync: Fix not setting static address (Bastien Nocera) [RHEL-2530]
- Bluetooth: Work around SCO over USB HCI design defect (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Introduce generic USB reset (Bastien Nocera) [RHEL-2530]
- btusb: Avoid reset of ISOC endpoint alt settings to zero (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_qca: Fix the teardown problem for real (Bastien Nocera) [RHEL-2530]
- Bluetooth: Fix crash when replugging CSR fake controllers (Bastien Nocera) [RHEL-2530]
- Bluetooth: Fix not cleanup led when bt_init fails (Bastien Nocera) [RHEL-2530]
- Bluetooth: Fix support for Read Local Supported Codecs V2 (Bastien Nocera) [RHEL-2530]
- Bluetooth: Remove codec id field in vendor codec definition (Bastien Nocera) [RHEL-2530]
- Bluetooth: silence a dmesg error message in hci_request.c (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_conn: add missing hci_dev_put() in iso_listen_bis() (Bastien Nocera) [RHEL-2530]
- Bluetooth: 6LoWPAN: add missing hci_dev_put() in get_l2cap_conn() (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Add debug message for CSR controllers (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Fix CSR clones again by re-adding ERR_DATA_REPORTING quirk (Bastien Nocera) [RHEL-2530]
- Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm (Bastien Nocera) [RHEL-2530]
- Bluetooth: virtio_bt: Use skb_put to set length (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_sync: Fix not indicating power state (Bastien Nocera) [RHEL-2530]
- Bluetooth: L2CAP: Fix user-after-free (Bastien Nocera) [RHEL-2530]
- Bluetooth: Call shutdown for HCI_USER_CHANNEL (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_core: Fix not handling link timeouts propertly (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_event: Make sure ISO events don't affect non-ISO connections (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_debugfs: Fix not checking conn->debugfs (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_sysfs: Fix attempting to call device_add multiple times (Bastien Nocera) [RHEL-2530]
- Bluetooth: MGMT: fix zalloc-simple.cocci warnings (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_{ldisc,serdev}: check percpu_init_rwsem() failure (Bastien Nocera) [RHEL-2530]
- Bluetooth: L2CAP: initialize delayed works at l2cap_chan_create() (Bastien Nocera) [RHEL-2530]
- Bluetooth: RFCOMM: Fix possible deadlock on socket shutdown/release (Bastien Nocera) [RHEL-2530]
- Bluetooth: hci_sync: allow advertise when scan without RPA (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Add a new VID/PID 0e8d/0608 for MT7921 (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Add a new PID/VID 13d3/3583 for MT7921 (Bastien Nocera) [RHEL-2530]
- Bluetooth: btintel: Mark Intel controller to support LE_STATES quirk (Bastien Nocera) [RHEL-2530]
- Bluetooth: btintel: Add support for Magnetor (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Add a new PID/VID 13d3/3578 for MT7921 (Bastien Nocera) [RHEL-2530]
- Bluetooth: Add experimental wrapper for MGMT based mesh (Bastien Nocera) [RHEL-2530]
- Bluetooth: Implement support for Mesh (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: mediatek: fix WMT failure during runtime suspend (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Add BT device 0cb8:c549 from RTW8852AE to tables (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Add RTL8761BUV device (Edimax BT-8500) (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: RTL8761BUV consistent naming (Bastien Nocera) [RHEL-2530]
- Bluetooth: btusb: Add Realtek RTL8852C support ID 0x13D3:0x3592 (Bastien Nocera) [RHEL-2530]
- Bluetooth: Move hci_abort_conn to hci_conn.c (Bastien Nocera) [RHEL-2530]
- Bluetooth: Normalize HCI_OP_READ_ENC_KEY_SIZE cmdcmplt (Bastien Nocera) [RHEL-2530]
- Bluetooth: convert hci_update_adv_data to hci_sync (Bastien Nocera) [RHEL-2530]
- Bluetooth: move hci_get_random_address() to hci_sync (Bastien Nocera) [RHEL-2530]
- Bluetooth: Delete unreferenced hci_request code (Bastien Nocera) [RHEL-2530]
- Bluetooth: Move Adv Instance timer to hci_sync (Bastien Nocera) [RHEL-2530]
- Bluetooth: Convert SCO configure_datapath to hci_sync (Bastien Nocera) [RHEL-2530]
- Bluetooth: Delete unused hci_req_stop_discovery() (Bastien Nocera) [RHEL-2530]
- Bluetooth: Rework le_scan_restart for hci_sync (Bastien Nocera) [RHEL-2530]
- Bluetooth: Convert le_scan_disable timeout to hci_sync (Bastien Nocera) [RHEL-2530]
- Bluetooth: clean up error pointer checking (Bastien Nocera) [RHEL-2530]
- regmap: Account for register length in SMBus I/O limits (Mark Langsdorf) [RHEL-1023]
- regmap: Drop initial version of maximum transfer length fixes (Mark Langsdorf) [RHEL-1023]
- regmap: spi-avmm: Fix regmap_bus max_raw_write (Mark Langsdorf) [RHEL-1023]
- drivers: base: cacheinfo: Update cpu_map_populated during CPU Hotplug (Mark Langsdorf) [RHEL-1023]
- drivers: base: cacheinfo: Fix shared_cpu_map changes in event of CPU hotplug (Mark Langsdorf) [RHEL-1023]
- firmware_loader: Fix a NULL vs IS_ERR() check (Mark Langsdorf) [RHEL-1023]
- driver core: class: properly reference count class_dev_iter() (Mark Langsdorf) [RHEL-1023]
- regmap: Account for register length when chunking (Mark Langsdorf) [RHEL-1023]
- device property: make device_property functions take const device * (Mark Langsdorf) [RHEL-1023]
- driver core: update comments in device_rename() (Mark Langsdorf) [RHEL-1023]
- driver core: Don't require dynamic_debug for initcall_debug probe timing (Mark Langsdorf) [RHEL-1023]
- firmware_loader: rework crypto dependencies (Mark Langsdorf) [RHEL-1023]
- firmware_loader: Strip off \n from customized path (Mark Langsdorf) [RHEL-1023]
- cacheinfo: Adjust includes to remove of_device.h (Mark Langsdorf) [RHEL-1023]
- of: Move CPU node related functions to their own file (Mark Langsdorf) [RHEL-1023]
- regmap: allow upshifting register addresses before performing operations (Mark Langsdorf) [RHEL-1023]
- PM: core: Remove unnecessary (void *) conversions (Mark Langsdorf) [RHEL-1023]
- regmap: Pass irq_drv_data as a parameter for set_type_config() (Mark Langsdorf) [RHEL-1023]
- tty: make tty_class a static const structure (Mark Langsdorf) [RHEL-1023]
- driver core: class: remove struct class_interface * from callbacks (Mark Langsdorf) [RHEL-1023]
- driver core: class: mark the struct class in struct class_interface constant (Mark Langsdorf) [RHEL-1023]
- driver core: class: make class_register() take a const * (Mark Langsdorf) [RHEL-1023]
- driver core: class: mark class_release() as taking a const * (Mark Langsdorf) [RHEL-1023]
- pktcdvd: simplify the class_pktcdvd logic (Mark Langsdorf) [RHEL-1023]
- driver core: remove incorrect comment for device_create* (Mark Langsdorf) [RHEL-1023]
- regmap: Factor out single value register syncing (Mark Langsdorf) [RHEL-1023]
- driver core: class: fix slab-use-after-free Read in class_register() (Mark Langsdorf) [RHEL-1023]
- driver core: make sysfs_dev_char_kobj static (Mark Langsdorf) [RHEL-1023]
- driver core: make sysfs_dev_block_kobj static (Mark Langsdorf) [RHEL-1023]
- driver core: class: remove dev_kobj from struct class (Mark Langsdorf) [RHEL-1023]
- driver core: clean up the logic to determine which /sys/dev/ directory to use (Mark Langsdorf) [RHEL-1023]
- driver core: class: remove subsystem private pointer from struct class (Mark Langsdorf) [RHEL-1023]
- driver core: create class_is_registered() (Mark Langsdorf) [RHEL-1023]
- driver core: core: move to use class_to_subsys() (Mark Langsdorf) [RHEL-1023]
- regmap: Removed compressed cache support (Mark Langsdorf) [RHEL-1023]
- firmware_loader: Add debug message with checksum for FW file (Mark Langsdorf) [RHEL-1023]
- redhat/configs: enable the new firmware loader debug logging (Mark Langsdorf) [RHEL-1023]
- base: soc: populate machine name in soc_device_register if empty (Mark Langsdorf) [RHEL-1023]
- driver core: class.c: convert to only use class_to_subsys (Mark Langsdorf) [RHEL-1023]
- driver core: class: implement class_get/put without the private pointer. (Mark Langsdorf) [RHEL-1023]
- zram: fix up permission for the hot_add sysfs file (Mark Langsdorf) [RHEL-1023]
- driver core: class: mark the struct class for sysfs callbacks as constant (Mark Langsdorf) [RHEL-1023]
- driver core: Add CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT (Mark Langsdorf) [RHEL-1023]
- redhat/configs: disable the new fw_devlink option (Mark Langsdorf) [RHEL-1023]
- driver core: bus: constify class_unregister/destroy() (Mark Langsdorf) [RHEL-1023]
- driver core: Add a comment to set_primary_fwnode() on nullifying (Mark Langsdorf) [RHEL-1023]
- driver core: move sysfs_dev_char_kobj out of class.h (Mark Langsdorf) [RHEL-1023]
- driver core: class: fix documentation for class_create() (Mark Langsdorf) [RHEL-1023]
- regmap: Support paging for buses with reg_read()/reg_write() (Mark Langsdorf) [RHEL-1023]
- regmap: Clarify error for unknown cache types (Mark Langsdorf) [RHEL-1023]
- regmap: Handle sparse caches in the default sync (Mark Langsdorf) [RHEL-1023]
- regmap: add a helper to translate the register address (Mark Langsdorf) [RHEL-1023]
- kobject.h remove extern from function prototypes (Greg Kroah-Hartman) [RHEL-1023]
- driver core: device.h: remove extern from function prototypes (Mark Langsdorf) [RHEL-1023]
- driver core: physical_location.h remove extern from function prototypes (Mark Langsdorf) [RHEL-1023]
- driver core: base.h: remove extern from function prototypes (Mark Langsdorf) [RHEL-1023]
- driver core: driver.h: remove extern from function prototypes (Mark Langsdorf) [RHEL-1023]
- driver core: bus.h: remove extern from function prototypes (Mark Langsdorf) [RHEL-1023]
- driver core: class.h: remove extern from function prototypes (Mark Langsdorf) [RHEL-1023]
- driver core: class: use lock_class_key already present in struct subsys_private (Mark Langsdorf) [RHEL-1023]
- device property: Constify a few fwnode APIs (Mark Langsdorf) [RHEL-1023]
- device property: constify fwnode_get_phy_mode() argument (Mark Langsdorf) [RHEL-1023]
- driver core: bus: constify bus_get() (Mark Langsdorf) [RHEL-1023]
- driver core: bus: constify driver_find() (Mark Langsdorf) [RHEL-1023]
- driver core: bus: constify bus_rescan_devices() (Mark Langsdorf) [RHEL-1023]
- driver core: bus: constantify bus_register() (Mark Langsdorf) [RHEL-1023]
- driver core: bus: mark the struct bus_type for sysfs callbacks as constant (Mark Langsdorf) [RHEL-1023]
- workqueue: move to use bus_get_dev_root() (Mark Langsdorf) [RHEL-1023]
- ACPI: LPIT: move to use bus_get_dev_root() (Mark Langsdorf) [RHEL-1023]
- cpu/hotplug: move to use bus_get_dev_root() (Mark Langsdorf) [RHEL-1023]
- EDAC/sysfs: move to use bus_get_dev_root() (Mark Langsdorf) [RHEL-1023]
- x86/umwait: move to use bus_get_dev_root() (Mark Langsdorf) [RHEL-1023]
- x86/microcode: move to use bus_get_dev_root() (Mark Langsdorf) [RHEL-1023]
- irqchip/mbigen: move to use bus_get_dev_root() (Mark Langsdorf) [RHEL-1023]
- s390/smp: move to use bus_get_dev_root() (Mark Langsdorf) [RHEL-1023]
- s390/topology: move to use bus_get_dev_root() (Mark Langsdorf) [RHEL-1023]
- powerpc/fsl: fix compiler warning in fsl_wakeup_sys_init() (Mark Langsdorf) [RHEL-1023]
- powerpc/fsl: move to use bus_get_dev_root() (Mark Langsdorf) [RHEL-1023]
- powerpc/pseries: move to use bus_get_dev_root() (Mark Langsdorf) [RHEL-1023]
- powerpc/powernv: move to use bus_get_dev_root() (Mark Langsdorf) [RHEL-1023]
- powerpc/sysfs: move to use bus_get_dev_root() (Mark Langsdorf) [RHEL-1023]
- arm64: cpufeature: move to use bus_get_dev_root() (Mark Langsdorf) [RHEL-1023]
- platform/x86: ibm_rtl: move to use bus_get_dev_root() (Mark Langsdorf) [RHEL-1023]
- cpufreq: move to use bus_get_dev_root() (Mark Langsdorf) [RHEL-1023]
- cpuidle: move to use bus_get_dev_root() (Mark Langsdorf) [RHEL-1023]
- driver core: bus: move dev_root out of struct bus_type (Mark Langsdorf) [RHEL-1023]
- driver core: device: make device_create*() take a const struct class * (Mark Langsdorf) [RHEL-1023]
- driver core: device: mark struct class in struct device as constant (Mark Langsdorf) [RHEL-1023]
- driver core: device: make device_destroy() take a const class * (Mark Langsdorf) [RHEL-1023]
- driver core: class: make class_create/remove_file*() options const (Mark Langsdorf) [RHEL-1023]
- driver core: class: make class_find_device*() options const (Mark Langsdorf) [RHEL-1023]
- driver core: class: make class_for_each_device() options const (Mark Langsdorf) [RHEL-1023]
- driver core: class: make class_dev_iter_init() options const (Mark Langsdorf) [RHEL-1023]
- driver core: class: remove module * from class_create() (Mark Langsdorf) [RHEL-1023]
- driver core: class: remove struct module owner out of struct class (Mark Langsdorf) [RHEL-1023]
- drivers: remove struct module * setting from struct class (Mark Langsdorf) [RHEL-1023]
- driver core: class: specify the module owner in __class_register() (Mark Langsdorf) [RHEL-1023]
- regmap: cache: Silence checkpatch warning (Mark Langsdorf) [RHEL-1023]
- regmap: cache: Return error in cache sync operations for REGCACHE_NONE (Mark Langsdorf) [RHEL-1023]
- devres: Pass unique name of the resource to devm_add_action() (Mark Langsdorf) [RHEL-1023]
- device property: Clarify description of returned value in some functions (Mark Langsdorf) [RHEL-1023]
- driver core: Make state_synced device attribute writeable (Mark Langsdorf) [RHEL-1023]
- driver core: Add fw_devlink.sync_state command line param (Mark Langsdorf) [RHEL-1023]
- driver core: class: fix block class problem when removing CONFIG_SYSFS_DEPRECATED* (Mark Langsdorf) [RHEL-1023]
- driver core: remove CONFIG_SYSFS_DEPRECATED and CONFIG_SYSFS_DEPRECATED_V2 (Mark Langsdorf) [RHEL-1023]
- regmap-irq: Add no_status support (Mark Langsdorf) [RHEL-1023]
- regmap-irq: Remove unused mask_invert flag (Mark Langsdorf) [RHEL-1023]
- regmap-irq: Remove unused type_invert flag (Mark Langsdorf) [RHEL-1023]
- mfd: rohm-bd718x7: Drop useless mask_invert flag on irqchip (Mark Langsdorf) [RHEL-1023]
- genirq: Allow irq_chip registration functions to take a const irq_chip (Mark Langsdorf) [RHEL-1023]
- PM: domains: fix memory leak with using debugfs_lookup() (Mark Langsdorf) [RHEL-1023]
- driver core: make kobj_type structures constant (Mark Langsdorf) [RHEL-1023]
- kobject: kset_uevent_ops: make uevent() callback take a const * (Mark Langsdorf) [RHEL-1023]
- i3c: fix device.h kernel-doc warnings (Mark Langsdorf) [RHEL-1023]
- i3c: move dev_to_i3cdev() to use container_of_const() (Mark Langsdorf) [RHEL-1023]
- mcb: move to_mcb_device() to use container_of_const() (Mark Langsdorf) [RHEL-1023]
- drivers: hv: move device_to_hv_device to use container_of_const() (Mark Langsdorf) [RHEL-1023]
- platform/x86: wmi: move dev_to_wblock() and dev_to_wdev to use container_of_const() (Mark Langsdorf) [RHEL-1023]
- vio: move to_vio_dev() to use container_of_const() (Mark Langsdorf) [RHEL-1023]
- firewire: move fw_device() and fw_unit() to use container_of_const() (Mark Langsdorf) [RHEL-1023]
- platform/surface: aggregator: move to_ssam_device() to use container_of_const() (Mark Langsdorf) [RHEL-1023]
- driver core: fixup for "driver core: make struct bus_type.uevent() take a const *" (Mark Langsdorf) [RHEL-1023]
- driver core: make struct bus_type.uevent() take a const * (Mark Langsdorf) [RHEL-1023]
- driver core: make struct device_type.uevent() take a const * (Mark Langsdorf) [RHEL-1023]
- kobject: make kobject_namespace take a const * (Mark Langsdorf) [RHEL-1023]
- kobject: kset_uevent_ops: make name() callback take a const * (Mark Langsdorf) [RHEL-1023]
- kobject: kset_uevent_ops: make filter() callback take a const * (Mark Langsdorf) [RHEL-1023]
- kobject: make kobject_get_ownership() take a constant kobject * (Mark Langsdorf) [RHEL-1023]
- kobject: make get_ktype() take a const pointer (Mark Langsdorf) [RHEL-1023]
Resolves: rhbz#2223717, RHEL-8455, RHEL-10007, RHEL-10026, RHEL-10042, RHEL-10094, RHEL-1023, RHEL-11213, RHEL-11438, RHEL-11472, RHEL-11488, RHEL-11492, RHEL-12454, RHEL-12707, RHEL-13058, RHEL-14318, RHEL-15261, RHEL-1899, RHEL-2530, RHEL-2556, RHEL-2711, RHEL-2715, RHEL-2717, RHEL-3655, RHEL-5335, RHEL-5838, RHEL-7186, RHEL-7264, RHEL-800, RHEL-8437

Signed-off-by: Jan Stancek <jstancek@redhat.com>

Makefile.rhelver

@@ -12,7 +12,7 @@ RHEL_MINOR = 4
 #
 # Use this spot to avoid future merge conflicts.
 # Do not trim this comment.
-RHEL_RELEASE = 386
+RHEL_RELEASE = 387
 
 #
 # ZSTREAM

kernel-aarch64-64k-debug-rhel.config

@@ -639,6 +639,7 @@ CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_BREDR=y
 CONFIG_BT_DEBUGFS=y
 CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBCM4377 is not set
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBTSDIO=m
@@ -646,6 +647,7 @@ CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
 CONFIG_BT_HCIBTUSB_BCM=y
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTUSB_MTK=y
+CONFIG_BT_HCIBTUSB_POLL_SYNC=y
 CONFIG_BT_HCIBTUSB_RTL=y
 # CONFIG_BT_HCIUART_AG6XX is not set
 CONFIG_BT_HCIUART_ATH3K=y
@@ -658,12 +660,14 @@ CONFIG_BT_HIDP=m
 # CONFIG_BT_HS is not set
 CONFIG_BT_INTEL=m
 # CONFIG_BT_LEDS is not set
+CONFIG_BT_LE_L2CAP_ECRED=y
 CONFIG_BT_LE=y
 CONFIG_BT=m
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
 # CONFIG_BT_MSFTEXT is not set
 # CONFIG_BT_MTKSDIO is not set
+# CONFIG_BT_NXPUART is not set
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 # CONFIG_BTRFS_FS is not set
@@ -1866,9 +1870,11 @@ CONFIG_FUTEX=y
 # CONFIG_FW_CACHE is not set
 # CONFIG_FW_CFG_SYSFS_CMDLINE is not set
 CONFIG_FW_CFG_SYSFS=y
+# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set
 CONFIG_FW_LOADER_COMPRESS_XZ=y
 CONFIG_FW_LOADER_COMPRESS=y
 CONFIG_FW_LOADER_COMPRESS_ZSTD=y
+CONFIG_FW_LOADER_DEBUG=y
 # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
 # CONFIG_FW_LOADER_USER_HELPER is not set
 CONFIG_FW_LOADER=y
@@ -6448,7 +6454,6 @@ CONFIG_USB_EZUSB_FX2=m
 # CONFIG_USB_FEW_INIT_RETRIES is not set
 # CONFIG_USB_FOTG210_HCD is not set
 # CONFIG_USB_FOTG210_UDC is not set
-CONFIG_USB_FTDI_ELAN=m
 # CONFIG_USB_FUNCTIONFS is not set
 # CONFIG_USB_G_ACM_MS is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -6698,7 +6703,6 @@ CONFIG_USB_TEGRA_XUDC=m
 # CONFIG_USB_TEST is not set
 CONFIG_USB_TMC=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_U132_HCD is not set
 CONFIG_USB_UAS=m
 CONFIG_USB_UEAGLEATM=m
 CONFIG_USB_UHCI_HCD=y
@@ -6741,6 +6745,7 @@ CONFIG_UV_SYSFS=m
 CONFIG_VETH=m
 CONFIG_VEXPRESS_CONFIG=y
 CONFIG_VFAT_FS=m
+# CONFIG_VFIO_AMBA is not set
 CONFIG_VFIO_IOMMU_TYPE1=m
 CONFIG_VFIO=m
 # CONFIG_VFIO_MDEV is not set

kernel-aarch64-64k-rhel.config

@@ -639,6 +639,7 @@ CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_BREDR=y
 CONFIG_BT_DEBUGFS=y
 CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBCM4377 is not set
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBTSDIO=m
@@ -646,6 +647,7 @@ CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
 CONFIG_BT_HCIBTUSB_BCM=y
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTUSB_MTK=y
+CONFIG_BT_HCIBTUSB_POLL_SYNC=y
 CONFIG_BT_HCIBTUSB_RTL=y
 # CONFIG_BT_HCIUART_AG6XX is not set
 CONFIG_BT_HCIUART_ATH3K=y
@@ -658,12 +660,14 @@ CONFIG_BT_HIDP=m
 # CONFIG_BT_HS is not set
 CONFIG_BT_INTEL=m
 # CONFIG_BT_LEDS is not set
+CONFIG_BT_LE_L2CAP_ECRED=y
 CONFIG_BT_LE=y
 CONFIG_BT=m
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
 # CONFIG_BT_MSFTEXT is not set
 # CONFIG_BT_MTKSDIO is not set
+# CONFIG_BT_NXPUART is not set
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 # CONFIG_BTRFS_FS is not set
@@ -1850,9 +1854,11 @@ CONFIG_FUTEX=y
 # CONFIG_FW_CACHE is not set
 # CONFIG_FW_CFG_SYSFS_CMDLINE is not set
 CONFIG_FW_CFG_SYSFS=y
+# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set
 CONFIG_FW_LOADER_COMPRESS_XZ=y
 CONFIG_FW_LOADER_COMPRESS=y
 CONFIG_FW_LOADER_COMPRESS_ZSTD=y
+CONFIG_FW_LOADER_DEBUG=y
 # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
 # CONFIG_FW_LOADER_USER_HELPER is not set
 CONFIG_FW_LOADER=y
@@ -6424,7 +6430,6 @@ CONFIG_USB_EZUSB_FX2=m
 # CONFIG_USB_FEW_INIT_RETRIES is not set
 # CONFIG_USB_FOTG210_HCD is not set
 # CONFIG_USB_FOTG210_UDC is not set
-CONFIG_USB_FTDI_ELAN=m
 # CONFIG_USB_FUNCTIONFS is not set
 # CONFIG_USB_G_ACM_MS is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -6674,7 +6679,6 @@ CONFIG_USB_TEGRA_XUDC=m
 # CONFIG_USB_TEST is not set
 CONFIG_USB_TMC=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_U132_HCD is not set
 CONFIG_USB_UAS=m
 CONFIG_USB_UEAGLEATM=m
 CONFIG_USB_UHCI_HCD=y
@@ -6717,6 +6721,7 @@ CONFIG_UV_SYSFS=m
 CONFIG_VETH=m
 CONFIG_VEXPRESS_CONFIG=y
 CONFIG_VFAT_FS=m
+# CONFIG_VFIO_AMBA is not set
 CONFIG_VFIO_IOMMU_TYPE1=m
 CONFIG_VFIO=m
 # CONFIG_VFIO_MDEV is not set

kernel-aarch64-debug-rhel.config

@@ -636,6 +636,7 @@ CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_BREDR=y
 CONFIG_BT_DEBUGFS=y
 CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBCM4377 is not set
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBTSDIO=m
@@ -643,6 +644,7 @@ CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
 CONFIG_BT_HCIBTUSB_BCM=y
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTUSB_MTK=y
+CONFIG_BT_HCIBTUSB_POLL_SYNC=y
 CONFIG_BT_HCIBTUSB_RTL=y
 # CONFIG_BT_HCIUART_AG6XX is not set
 CONFIG_BT_HCIUART_ATH3K=y
@@ -655,12 +657,14 @@ CONFIG_BT_HIDP=m
 # CONFIG_BT_HS is not set
 CONFIG_BT_INTEL=m
 # CONFIG_BT_LEDS is not set
+CONFIG_BT_LE_L2CAP_ECRED=y
 CONFIG_BT_LE=y
 CONFIG_BT=m
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
 # CONFIG_BT_MSFTEXT is not set
 # CONFIG_BT_MTKSDIO is not set
+# CONFIG_BT_NXPUART is not set
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 # CONFIG_BTRFS_FS is not set
@@ -1863,9 +1867,11 @@ CONFIG_FUTEX=y
 # CONFIG_FW_CACHE is not set
 # CONFIG_FW_CFG_SYSFS_CMDLINE is not set
 CONFIG_FW_CFG_SYSFS=y
+# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set
 CONFIG_FW_LOADER_COMPRESS_XZ=y
 CONFIG_FW_LOADER_COMPRESS=y
 CONFIG_FW_LOADER_COMPRESS_ZSTD=y
+CONFIG_FW_LOADER_DEBUG=y
 # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
 # CONFIG_FW_LOADER_USER_HELPER is not set
 CONFIG_FW_LOADER=y
@@ -6445,7 +6451,6 @@ CONFIG_USB_EZUSB_FX2=m
 # CONFIG_USB_FEW_INIT_RETRIES is not set
 # CONFIG_USB_FOTG210_HCD is not set
 # CONFIG_USB_FOTG210_UDC is not set
-CONFIG_USB_FTDI_ELAN=m
 # CONFIG_USB_FUNCTIONFS is not set
 # CONFIG_USB_G_ACM_MS is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -6695,7 +6700,6 @@ CONFIG_USB_TEGRA_XUDC=m
 # CONFIG_USB_TEST is not set
 CONFIG_USB_TMC=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_U132_HCD is not set
 CONFIG_USB_UAS=m
 CONFIG_USB_UEAGLEATM=m
 CONFIG_USB_UHCI_HCD=y
@@ -6738,6 +6742,7 @@ CONFIG_UV_SYSFS=m
 CONFIG_VETH=m
 CONFIG_VEXPRESS_CONFIG=y
 CONFIG_VFAT_FS=m
+# CONFIG_VFIO_AMBA is not set
 CONFIG_VFIO_IOMMU_TYPE1=m
 CONFIG_VFIO=m
 # CONFIG_VFIO_MDEV is not set

kernel-aarch64-rhel.config

@@ -636,6 +636,7 @@ CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_BREDR=y
 CONFIG_BT_DEBUGFS=y
 CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBCM4377 is not set
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBTSDIO=m
@@ -643,6 +644,7 @@ CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
 CONFIG_BT_HCIBTUSB_BCM=y
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTUSB_MTK=y
+CONFIG_BT_HCIBTUSB_POLL_SYNC=y
 CONFIG_BT_HCIBTUSB_RTL=y
 # CONFIG_BT_HCIUART_AG6XX is not set
 CONFIG_BT_HCIUART_ATH3K=y
@@ -655,12 +657,14 @@ CONFIG_BT_HIDP=m
 # CONFIG_BT_HS is not set
 CONFIG_BT_INTEL=m
 # CONFIG_BT_LEDS is not set
+CONFIG_BT_LE_L2CAP_ECRED=y
 CONFIG_BT_LE=y
 CONFIG_BT=m
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
 # CONFIG_BT_MSFTEXT is not set
 # CONFIG_BT_MTKSDIO is not set
+# CONFIG_BT_NXPUART is not set
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 # CONFIG_BTRFS_FS is not set
@@ -1847,9 +1851,11 @@ CONFIG_FUTEX=y
 # CONFIG_FW_CACHE is not set
 # CONFIG_FW_CFG_SYSFS_CMDLINE is not set
 CONFIG_FW_CFG_SYSFS=y
+# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set
 CONFIG_FW_LOADER_COMPRESS_XZ=y
 CONFIG_FW_LOADER_COMPRESS=y
 CONFIG_FW_LOADER_COMPRESS_ZSTD=y
+CONFIG_FW_LOADER_DEBUG=y
 # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
 # CONFIG_FW_LOADER_USER_HELPER is not set
 CONFIG_FW_LOADER=y
@@ -6421,7 +6427,6 @@ CONFIG_USB_EZUSB_FX2=m
 # CONFIG_USB_FEW_INIT_RETRIES is not set
 # CONFIG_USB_FOTG210_HCD is not set
 # CONFIG_USB_FOTG210_UDC is not set
-CONFIG_USB_FTDI_ELAN=m
 # CONFIG_USB_FUNCTIONFS is not set
 # CONFIG_USB_G_ACM_MS is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -6671,7 +6676,6 @@ CONFIG_USB_TEGRA_XUDC=m
 # CONFIG_USB_TEST is not set
 CONFIG_USB_TMC=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_U132_HCD is not set
 CONFIG_USB_UAS=m
 CONFIG_USB_UEAGLEATM=m
 CONFIG_USB_UHCI_HCD=y
@@ -6714,6 +6718,7 @@ CONFIG_UV_SYSFS=m
 CONFIG_VETH=m
 CONFIG_VEXPRESS_CONFIG=y
 CONFIG_VFAT_FS=m
+# CONFIG_VFIO_AMBA is not set
 CONFIG_VFIO_IOMMU_TYPE1=m
 CONFIG_VFIO=m
 # CONFIG_VFIO_MDEV is not set

kernel-aarch64-rt-debug-rhel.config

@@ -646,6 +646,7 @@ CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_BREDR=y
 CONFIG_BT_DEBUGFS=y
 CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBCM4377 is not set
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBTSDIO=m
@@ -653,6 +654,7 @@ CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
 CONFIG_BT_HCIBTUSB_BCM=y
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTUSB_MTK=y
+CONFIG_BT_HCIBTUSB_POLL_SYNC=y
 CONFIG_BT_HCIBTUSB_RTL=y
 # CONFIG_BT_HCIUART_AG6XX is not set
 CONFIG_BT_HCIUART_ATH3K=y
@@ -665,12 +667,14 @@ CONFIG_BT_HIDP=m
 # CONFIG_BT_HS is not set
 CONFIG_BT_INTEL=m
 # CONFIG_BT_LEDS is not set
+CONFIG_BT_LE_L2CAP_ECRED=y
 CONFIG_BT_LE=y
 CONFIG_BT=m
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
 # CONFIG_BT_MSFTEXT is not set
 # CONFIG_BT_MTKSDIO is not set
+# CONFIG_BT_NXPUART is not set
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 # CONFIG_BTRFS_FS is not set
@@ -1906,9 +1910,11 @@ CONFIG_FUTEX=y
 # CONFIG_FW_CACHE is not set
 # CONFIG_FW_CFG_SYSFS_CMDLINE is not set
 CONFIG_FW_CFG_SYSFS=y
+# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set
 CONFIG_FW_LOADER_COMPRESS_XZ=y
 CONFIG_FW_LOADER_COMPRESS=y
 CONFIG_FW_LOADER_COMPRESS_ZSTD=y
+CONFIG_FW_LOADER_DEBUG=y
 # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
 # CONFIG_FW_LOADER_USER_HELPER is not set
 CONFIG_FW_LOADER=y
@@ -6551,7 +6557,6 @@ CONFIG_USB_EZUSB_FX2=m
 # CONFIG_USB_FEW_INIT_RETRIES is not set
 # CONFIG_USB_FOTG210_HCD is not set
 # CONFIG_USB_FOTG210_UDC is not set
-CONFIG_USB_FTDI_ELAN=m
 # CONFIG_USB_FUNCTIONFS is not set
 # CONFIG_USB_G_ACM_MS is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -6802,7 +6807,6 @@ CONFIG_USB_TEGRA_XUDC=m
 # CONFIG_USB_TEST is not set
 CONFIG_USB_TMC=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_U132_HCD is not set
 CONFIG_USB_UAS=m
 CONFIG_USB_UEAGLEATM=m
 CONFIG_USB_UHCI_HCD=y
@@ -6845,6 +6849,7 @@ CONFIG_UV_SYSFS=m
 CONFIG_VETH=m
 CONFIG_VEXPRESS_CONFIG=y
 CONFIG_VFAT_FS=m
+# CONFIG_VFIO_AMBA is not set
 CONFIG_VFIO_IOMMU_TYPE1=m
 CONFIG_VFIO=m
 # CONFIG_VFIO_MDEV is not set

kernel-aarch64-rt-rhel.config

@@ -646,6 +646,7 @@ CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_BREDR=y
 CONFIG_BT_DEBUGFS=y
 CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBCM4377 is not set
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBTSDIO=m
@@ -653,6 +654,7 @@ CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
 CONFIG_BT_HCIBTUSB_BCM=y
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTUSB_MTK=y
+CONFIG_BT_HCIBTUSB_POLL_SYNC=y
 CONFIG_BT_HCIBTUSB_RTL=y
 # CONFIG_BT_HCIUART_AG6XX is not set
 CONFIG_BT_HCIUART_ATH3K=y
@@ -665,12 +667,14 @@ CONFIG_BT_HIDP=m
 # CONFIG_BT_HS is not set
 CONFIG_BT_INTEL=m
 # CONFIG_BT_LEDS is not set
+CONFIG_BT_LE_L2CAP_ECRED=y
 CONFIG_BT_LE=y
 CONFIG_BT=m
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
 # CONFIG_BT_MSFTEXT is not set
 # CONFIG_BT_MTKSDIO is not set
+# CONFIG_BT_NXPUART is not set
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 # CONFIG_BTRFS_FS is not set
@@ -1890,9 +1894,11 @@ CONFIG_FUTEX=y
 # CONFIG_FW_CACHE is not set
 # CONFIG_FW_CFG_SYSFS_CMDLINE is not set
 CONFIG_FW_CFG_SYSFS=y
+# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set
 CONFIG_FW_LOADER_COMPRESS_XZ=y
 CONFIG_FW_LOADER_COMPRESS=y
 CONFIG_FW_LOADER_COMPRESS_ZSTD=y
+CONFIG_FW_LOADER_DEBUG=y
 # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
 # CONFIG_FW_LOADER_USER_HELPER is not set
 CONFIG_FW_LOADER=y
@@ -6527,7 +6533,6 @@ CONFIG_USB_EZUSB_FX2=m
 # CONFIG_USB_FEW_INIT_RETRIES is not set
 # CONFIG_USB_FOTG210_HCD is not set
 # CONFIG_USB_FOTG210_UDC is not set
-CONFIG_USB_FTDI_ELAN=m
 # CONFIG_USB_FUNCTIONFS is not set
 # CONFIG_USB_G_ACM_MS is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -6778,7 +6783,6 @@ CONFIG_USB_TEGRA_XUDC=m
 # CONFIG_USB_TEST is not set
 CONFIG_USB_TMC=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_U132_HCD is not set
 CONFIG_USB_UAS=m
 CONFIG_USB_UEAGLEATM=m
 CONFIG_USB_UHCI_HCD=y
@@ -6821,6 +6825,7 @@ CONFIG_UV_SYSFS=m
 CONFIG_VETH=m
 CONFIG_VEXPRESS_CONFIG=y
 CONFIG_VFAT_FS=m
+# CONFIG_VFIO_AMBA is not set
 CONFIG_VFIO_IOMMU_TYPE1=m
 CONFIG_VFIO=m
 # CONFIG_VFIO_MDEV is not set

kernel-ppc64le-debug-rhel.config

@@ -496,6 +496,7 @@ CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_BREDR=y
 CONFIG_BT_DEBUGFS=y
 CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBCM4377 is not set
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBTSDIO=m
@@ -503,6 +504,7 @@ CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
 CONFIG_BT_HCIBTUSB_BCM=y
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTUSB_MTK=y
+CONFIG_BT_HCIBTUSB_POLL_SYNC=y
 CONFIG_BT_HCIBTUSB_RTL=y
 # CONFIG_BT_HCIUART_AG6XX is not set
 CONFIG_BT_HCIUART_ATH3K=y
@@ -515,12 +517,14 @@ CONFIG_BT_HIDP=m
 # CONFIG_BT_HS is not set
 CONFIG_BT_INTEL=m
 # CONFIG_BT_LEDS is not set
+CONFIG_BT_LE_L2CAP_ECRED=y
 CONFIG_BT_LE=y
 CONFIG_BT=m
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
 # CONFIG_BT_MSFTEXT is not set
 # CONFIG_BT_MTKSDIO is not set
+# CONFIG_BT_NXPUART is not set
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 # CONFIG_BTRFS_FS is not set
@@ -1624,9 +1628,11 @@ CONFIG_FUTEX=y
 # CONFIG_FW_CACHE is not set
 # CONFIG_FW_CFG_SYSFS_CMDLINE is not set
 CONFIG_FW_CFG_SYSFS=y
+# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set
 CONFIG_FW_LOADER_COMPRESS_XZ=y
 CONFIG_FW_LOADER_COMPRESS=y
 CONFIG_FW_LOADER_COMPRESS_ZSTD=y
+CONFIG_FW_LOADER_DEBUG=y
 # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
 # CONFIG_FW_LOADER_USER_HELPER is not set
 CONFIG_FW_LOADER=y
@@ -5898,7 +5904,6 @@ CONFIG_USB_EPSON2888=y
 CONFIG_USB_EZUSB_FX2=m
 # CONFIG_USB_FEW_INIT_RETRIES is not set
 # CONFIG_USB_FOTG210_HCD is not set
-CONFIG_USB_FTDI_ELAN=m
 # CONFIG_USB_GADGET is not set
 CONFIG_USB_GL860=m
 # CONFIG_USB_GPIO_VBUS is not set
@@ -6118,7 +6123,6 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_TEST is not set
 CONFIG_USB_TMC=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_U132_HCD is not set
 CONFIG_USB_UAS=m
 CONFIG_USB_UEAGLEATM=m
 CONFIG_USB_UHCI_HCD=y
@@ -6158,6 +6162,7 @@ CONFIG_UV_SYSFS=m
 # CONFIG_VEML6070 is not set
 CONFIG_VETH=m
 CONFIG_VFAT_FS=m
+# CONFIG_VFIO_AMBA is not set
 CONFIG_VFIO_IOMMU_TYPE1=m
 CONFIG_VFIO=m
 # CONFIG_VFIO_MDEV is not set
@@ -6350,7 +6355,7 @@ CONFIG_WATCH_QUEUE=y
 # CONFIG_WCN36XX is not set
 # CONFIG_WDAT_WDT is not set
 # CONFIG_WDTPCI is not set
-# CONFIG_WERROR is not set
+CONFIG_WERROR=y
 # CONFIG_WIL6210 is not set
 # CONFIG_WILC1000_SDIO is not set
 # CONFIG_WILC1000_SPI is not set

kernel-ppc64le-rhel.config

@@ -496,6 +496,7 @@ CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_BREDR=y
 CONFIG_BT_DEBUGFS=y
 CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBCM4377 is not set
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBTSDIO=m
@@ -503,6 +504,7 @@ CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
 CONFIG_BT_HCIBTUSB_BCM=y
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTUSB_MTK=y
+CONFIG_BT_HCIBTUSB_POLL_SYNC=y
 CONFIG_BT_HCIBTUSB_RTL=y
 # CONFIG_BT_HCIUART_AG6XX is not set
 CONFIG_BT_HCIUART_ATH3K=y
@@ -515,12 +517,14 @@ CONFIG_BT_HIDP=m
 # CONFIG_BT_HS is not set
 CONFIG_BT_INTEL=m
 # CONFIG_BT_LEDS is not set
+CONFIG_BT_LE_L2CAP_ECRED=y
 CONFIG_BT_LE=y
 CONFIG_BT=m
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
 # CONFIG_BT_MSFTEXT is not set
 # CONFIG_BT_MTKSDIO is not set
+# CONFIG_BT_NXPUART is not set
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 # CONFIG_BTRFS_FS is not set
@@ -1608,9 +1612,11 @@ CONFIG_FUTEX=y
 # CONFIG_FW_CACHE is not set
 # CONFIG_FW_CFG_SYSFS_CMDLINE is not set
 CONFIG_FW_CFG_SYSFS=y
+# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set
 CONFIG_FW_LOADER_COMPRESS_XZ=y
 CONFIG_FW_LOADER_COMPRESS=y
 CONFIG_FW_LOADER_COMPRESS_ZSTD=y
+CONFIG_FW_LOADER_DEBUG=y
 # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
 # CONFIG_FW_LOADER_USER_HELPER is not set
 CONFIG_FW_LOADER=y
@@ -5876,7 +5882,6 @@ CONFIG_USB_EPSON2888=y
 CONFIG_USB_EZUSB_FX2=m
 # CONFIG_USB_FEW_INIT_RETRIES is not set
 # CONFIG_USB_FOTG210_HCD is not set
-CONFIG_USB_FTDI_ELAN=m
 # CONFIG_USB_GADGET is not set
 CONFIG_USB_GL860=m
 # CONFIG_USB_GPIO_VBUS is not set
@@ -6096,7 +6101,6 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_TEST is not set
 CONFIG_USB_TMC=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_U132_HCD is not set
 CONFIG_USB_UAS=m
 CONFIG_USB_UEAGLEATM=m
 CONFIG_USB_UHCI_HCD=y
@@ -6136,6 +6140,7 @@ CONFIG_UV_SYSFS=m
 # CONFIG_VEML6070 is not set
 CONFIG_VETH=m
 CONFIG_VFAT_FS=m
+# CONFIG_VFIO_AMBA is not set
 CONFIG_VFIO_IOMMU_TYPE1=m
 CONFIG_VFIO=m
 # CONFIG_VFIO_MDEV is not set
@@ -6328,7 +6333,7 @@ CONFIG_WATCH_QUEUE=y
 # CONFIG_WCN36XX is not set
 # CONFIG_WDAT_WDT is not set
 # CONFIG_WDTPCI is not set
-# CONFIG_WERROR is not set
+CONFIG_WERROR=y
 # CONFIG_WIL6210 is not set
 # CONFIG_WILC1000_SDIO is not set
 # CONFIG_WILC1000_SPI is not set

kernel-s390x-debug-rhel.config

@@ -495,6 +495,7 @@ CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_BREDR=y
 CONFIG_BT_DEBUGFS=y
 CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBCM4377 is not set
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBTSDIO=m
@@ -502,6 +503,7 @@ CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
 CONFIG_BT_HCIBTUSB_BCM=y
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTUSB_MTK=y
+CONFIG_BT_HCIBTUSB_POLL_SYNC=y
 CONFIG_BT_HCIBTUSB_RTL=y
 # CONFIG_BT_HCIUART_AG6XX is not set
 CONFIG_BT_HCIUART_ATH3K=y
@@ -515,11 +517,13 @@ CONFIG_BT_HIDP=m
 CONFIG_BT_INTEL=m
 # CONFIG_BT is not set
 # CONFIG_BT_LEDS is not set
+CONFIG_BT_LE_L2CAP_ECRED=y
 CONFIG_BT_LE=y
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
 # CONFIG_BT_MSFTEXT is not set
 # CONFIG_BT_MTKSDIO is not set
+# CONFIG_BT_NXPUART is not set
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 # CONFIG_BTRFS_FS is not set
@@ -1627,9 +1631,11 @@ CONFIG_FUTEX=y
 # CONFIG_FW_CACHE is not set
 # CONFIG_FW_CFG_SYSFS_CMDLINE is not set
 CONFIG_FW_CFG_SYSFS=y
+# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set
 CONFIG_FW_LOADER_COMPRESS_XZ=y
 CONFIG_FW_LOADER_COMPRESS=y
 CONFIG_FW_LOADER_COMPRESS_ZSTD=y
+CONFIG_FW_LOADER_DEBUG=y
 # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
 # CONFIG_FW_LOADER_USER_HELPER is not set
 CONFIG_FW_LOADER=y
@@ -4365,8 +4371,6 @@ CONFIG_RV_REACT_PRINTK=y
 CONFIG_RV=y
 CONFIG_RXKAD=y
 CONFIG_RXPERF=m
-CONFIG_S390_AP_IOMMU=y
-CONFIG_S390_CCW_IOMMU=y
 CONFIG_S390_GUEST=y
 CONFIG_S390_HYPFS_FS=y
 CONFIG_S390_PRNG=m
@@ -5889,7 +5893,6 @@ CONFIG_USB_EPSON2888=y
 CONFIG_USB_EZUSB_FX2=m
 # CONFIG_USB_FEW_INIT_RETRIES is not set
 # CONFIG_USB_FOTG210_HCD is not set
-CONFIG_USB_FTDI_ELAN=m
 # CONFIG_USB_GADGET is not set
 CONFIG_USB_GL860=m
 # CONFIG_USB_GPIO_VBUS is not set
@@ -6106,7 +6109,6 @@ CONFIG_USB_STV06XX=m
 # CONFIG_USB_TEST is not set
 CONFIG_USB_TMC=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_U132_HCD is not set
 CONFIG_USB_UAS=m
 CONFIG_USB_UEAGLEATM=m
 CONFIG_USB_UHCI_HCD=y
@@ -6146,6 +6148,7 @@ CONFIG_UV_SYSFS=m
 # CONFIG_VEML6070 is not set
 CONFIG_VETH=m
 CONFIG_VFAT_FS=m
+# CONFIG_VFIO_AMBA is not set
 CONFIG_VFIO_AP=m
 CONFIG_VFIO_CCW=m
 CONFIG_VFIO_IOMMU_TYPE1=m
@@ -6343,7 +6346,7 @@ CONFIG_WATCH_QUEUE=y
 # CONFIG_WCN36XX is not set
 # CONFIG_WDAT_WDT is not set
 # CONFIG_WDTPCI is not set
-# CONFIG_WERROR is not set
+CONFIG_WERROR=y
 # CONFIG_WIL6210 is not set
 # CONFIG_WILC1000_SDIO is not set
 # CONFIG_WILC1000_SPI is not set

kernel-s390x-rhel.config

@@ -495,6 +495,7 @@ CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_BREDR=y
 CONFIG_BT_DEBUGFS=y
 CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBCM4377 is not set
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBTSDIO=m
@@ -502,6 +503,7 @@ CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
 CONFIG_BT_HCIBTUSB_BCM=y
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTUSB_MTK=y
+CONFIG_BT_HCIBTUSB_POLL_SYNC=y
 CONFIG_BT_HCIBTUSB_RTL=y
 # CONFIG_BT_HCIUART_AG6XX is not set
 CONFIG_BT_HCIUART_ATH3K=y
@@ -515,11 +517,13 @@ CONFIG_BT_HIDP=m
 CONFIG_BT_INTEL=m
 # CONFIG_BT is not set
 # CONFIG_BT_LEDS is not set
+CONFIG_BT_LE_L2CAP_ECRED=y
 CONFIG_BT_LE=y
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
 # CONFIG_BT_MSFTEXT is not set
 # CONFIG_BT_MTKSDIO is not set
+# CONFIG_BT_NXPUART is not set
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 # CONFIG_BTRFS_FS is not set
@@ -1611,9 +1615,11 @@ CONFIG_FUTEX=y
 # CONFIG_FW_CACHE is not set
 # CONFIG_FW_CFG_SYSFS_CMDLINE is not set
 CONFIG_FW_CFG_SYSFS=y
+# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set
 CONFIG_FW_LOADER_COMPRESS_XZ=y
 CONFIG_FW_LOADER_COMPRESS=y
 CONFIG_FW_LOADER_COMPRESS_ZSTD=y
+CONFIG_FW_LOADER_DEBUG=y
 # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
 # CONFIG_FW_LOADER_USER_HELPER is not set
 CONFIG_FW_LOADER=y
@@ -4345,8 +4351,6 @@ CONFIG_RV_REACT_PRINTK=y
 CONFIG_RV=y
 CONFIG_RXKAD=y
 CONFIG_RXPERF=m
-CONFIG_S390_AP_IOMMU=y
-CONFIG_S390_CCW_IOMMU=y
 CONFIG_S390_GUEST=y
 CONFIG_S390_HYPFS_FS=y
 CONFIG_S390_PRNG=m
@@ -5867,7 +5871,6 @@ CONFIG_USB_EPSON2888=y
 CONFIG_USB_EZUSB_FX2=m
 # CONFIG_USB_FEW_INIT_RETRIES is not set
 # CONFIG_USB_FOTG210_HCD is not set
-CONFIG_USB_FTDI_ELAN=m
 # CONFIG_USB_GADGET is not set
 CONFIG_USB_GL860=m
 # CONFIG_USB_GPIO_VBUS is not set
@@ -6084,7 +6087,6 @@ CONFIG_USB_STV06XX=m
 # CONFIG_USB_TEST is not set
 CONFIG_USB_TMC=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_U132_HCD is not set
 CONFIG_USB_UAS=m
 CONFIG_USB_UEAGLEATM=m
 CONFIG_USB_UHCI_HCD=y
@@ -6124,6 +6126,7 @@ CONFIG_UV_SYSFS=m
 # CONFIG_VEML6070 is not set
 CONFIG_VETH=m
 CONFIG_VFAT_FS=m
+# CONFIG_VFIO_AMBA is not set
 CONFIG_VFIO_AP=m
 CONFIG_VFIO_CCW=m
 CONFIG_VFIO_IOMMU_TYPE1=m
@@ -6321,7 +6324,7 @@ CONFIG_WATCH_QUEUE=y
 # CONFIG_WCN36XX is not set
 # CONFIG_WDAT_WDT is not set
 # CONFIG_WDTPCI is not set
-# CONFIG_WERROR is not set
+CONFIG_WERROR=y
 # CONFIG_WIL6210 is not set
 # CONFIG_WILC1000_SDIO is not set
 # CONFIG_WILC1000_SPI is not set

kernel-s390x-zfcpdump-rhel.config

@@ -499,6 +499,7 @@ CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_BREDR=y
 CONFIG_BT_DEBUGFS=y
 CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBCM4377 is not set
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBTSDIO=m
@@ -506,6 +507,7 @@ CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
 CONFIG_BT_HCIBTUSB_BCM=y
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTUSB_MTK=y
+CONFIG_BT_HCIBTUSB_POLL_SYNC=y
 CONFIG_BT_HCIBTUSB_RTL=y
 # CONFIG_BT_HCIUART_AG6XX is not set
 CONFIG_BT_HCIUART_ATH3K=y
@@ -519,11 +521,13 @@ CONFIG_BT_HIDP=m
 CONFIG_BT_INTEL=m
 # CONFIG_BT is not set
 # CONFIG_BT_LEDS is not set
+CONFIG_BT_LE_L2CAP_ECRED=y
 CONFIG_BT_LE=y
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
 # CONFIG_BT_MSFTEXT is not set
 # CONFIG_BT_MTKSDIO is not set
+# CONFIG_BT_NXPUART is not set
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 # CONFIG_BTRFS_FS is not set
@@ -1619,9 +1623,11 @@ CONFIG_FUTEX=y
 # CONFIG_FW_CACHE is not set
 # CONFIG_FW_CFG_SYSFS_CMDLINE is not set
 CONFIG_FW_CFG_SYSFS=y
+# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set
 CONFIG_FW_LOADER_COMPRESS_XZ=y
 CONFIG_FW_LOADER_COMPRESS=y
 CONFIG_FW_LOADER_COMPRESS_ZSTD=y
+CONFIG_FW_LOADER_DEBUG=y
 # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
 # CONFIG_FW_LOADER_USER_HELPER is not set
 CONFIG_FW_LOADER=y
@@ -4362,8 +4368,6 @@ CONFIG_RV_REACT_PRINTK=y
 CONFIG_RV=y
 CONFIG_RXKAD=y
 CONFIG_RXPERF=m
-CONFIG_S390_AP_IOMMU=y
-CONFIG_S390_CCW_IOMMU=y
 # CONFIG_S390_GUEST is not set
 # CONFIG_S390_HYPFS_FS is not set
 CONFIG_S390_PRNG=y
@@ -5894,7 +5898,6 @@ CONFIG_USB_EPSON2888=y
 CONFIG_USB_EZUSB_FX2=m
 # CONFIG_USB_FEW_INIT_RETRIES is not set
 # CONFIG_USB_FOTG210_HCD is not set
-CONFIG_USB_FTDI_ELAN=m
 # CONFIG_USB_GADGET is not set
 CONFIG_USB_GL860=m
 # CONFIG_USB_GPIO_VBUS is not set
@@ -6111,7 +6114,6 @@ CONFIG_USB_STV06XX=m
 # CONFIG_USB_TEST is not set
 CONFIG_USB_TMC=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_U132_HCD is not set
 CONFIG_USB_UAS=m
 CONFIG_USB_UEAGLEATM=m
 CONFIG_USB_UHCI_HCD=y
@@ -6151,6 +6153,7 @@ CONFIG_UV_SYSFS=m
 # CONFIG_VEML6070 is not set
 CONFIG_VETH=m
 # CONFIG_VFAT_FS is not set
+# CONFIG_VFIO_AMBA is not set
 CONFIG_VFIO_AP=m
 CONFIG_VFIO_CCW=m
 CONFIG_VFIO_IOMMU_TYPE1=m
@@ -6349,7 +6352,7 @@ CONFIG_WATCH_QUEUE=y
 # CONFIG_WCN36XX is not set
 # CONFIG_WDAT_WDT is not set
 # CONFIG_WDTPCI is not set
-# CONFIG_WERROR is not set
+CONFIG_WERROR=y
 # CONFIG_WIL6210 is not set
 # CONFIG_WILC1000_SDIO is not set
 # CONFIG_WILC1000_SPI is not set

kernel-x86_64-debug-rhel.config

@@ -525,6 +525,7 @@ CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_BREDR=y
 CONFIG_BT_DEBUGFS=y
 CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBCM4377 is not set
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBTSDIO=m
@@ -532,6 +533,7 @@ CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
 CONFIG_BT_HCIBTUSB_BCM=y
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTUSB_MTK=y
+CONFIG_BT_HCIBTUSB_POLL_SYNC=y
 CONFIG_BT_HCIBTUSB_RTL=y
 # CONFIG_BT_HCIUART_AG6XX is not set
 CONFIG_BT_HCIUART_ATH3K=y
@@ -544,12 +546,14 @@ CONFIG_BT_HIDP=m
 # CONFIG_BT_HS is not set
 CONFIG_BT_INTEL=m
 # CONFIG_BT_LEDS is not set
+CONFIG_BT_LE_L2CAP_ECRED=y
 CONFIG_BT_LE=y
 CONFIG_BT=m
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
 # CONFIG_BT_MSFTEXT is not set
 # CONFIG_BT_MTKSDIO is not set
+# CONFIG_BT_NXPUART is not set
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 # CONFIG_BTRFS_FS is not set
@@ -1733,9 +1737,11 @@ CONFIG_FUTEX=y
 # CONFIG_FW_CACHE is not set
 # CONFIG_FW_CFG_SYSFS_CMDLINE is not set
 CONFIG_FW_CFG_SYSFS=y
+# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set
 CONFIG_FW_LOADER_COMPRESS_XZ=y
 CONFIG_FW_LOADER_COMPRESS=y
 CONFIG_FW_LOADER_COMPRESS_ZSTD=y
+CONFIG_FW_LOADER_DEBUG=y
 # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
 CONFIG_FW_LOADER_USER_HELPER=y
 CONFIG_FW_LOADER=y
@@ -6147,7 +6153,6 @@ CONFIG_USB_EPSON2888=y
 CONFIG_USB_EZUSB_FX2=m
 # CONFIG_USB_FEW_INIT_RETRIES is not set
 # CONFIG_USB_FOTG210_HCD is not set
-CONFIG_USB_FTDI_ELAN=m
 # CONFIG_USB_GADGET is not set
 CONFIG_USB_GL860=m
 # CONFIG_USB_GPIO_VBUS is not set
@@ -6366,7 +6371,6 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_TEST is not set
 CONFIG_USB_TMC=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_U132_HCD is not set
 CONFIG_USB_UAS=m
 CONFIG_USB_UEAGLEATM=m
 CONFIG_USB_UHCI_HCD=y
@@ -6408,6 +6412,7 @@ CONFIG_VDPA_SIM_NET=m
 # CONFIG_VEML6070 is not set
 CONFIG_VETH=m
 CONFIG_VFAT_FS=m
+# CONFIG_VFIO_AMBA is not set
 CONFIG_VFIO_IOMMU_TYPE1=m
 CONFIG_VFIO=m
 CONFIG_VFIO_MDEV=m

kernel-x86_64-rhel.config

@@ -525,6 +525,7 @@ CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_BREDR=y
 CONFIG_BT_DEBUGFS=y
 CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBCM4377 is not set
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBTSDIO=m
@@ -532,6 +533,7 @@ CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
 CONFIG_BT_HCIBTUSB_BCM=y
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTUSB_MTK=y
+CONFIG_BT_HCIBTUSB_POLL_SYNC=y
 CONFIG_BT_HCIBTUSB_RTL=y
 # CONFIG_BT_HCIUART_AG6XX is not set
 CONFIG_BT_HCIUART_ATH3K=y
@@ -544,12 +546,14 @@ CONFIG_BT_HIDP=m
 # CONFIG_BT_HS is not set
 CONFIG_BT_INTEL=m
 # CONFIG_BT_LEDS is not set
+CONFIG_BT_LE_L2CAP_ECRED=y
 CONFIG_BT_LE=y
 CONFIG_BT=m
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
 # CONFIG_BT_MSFTEXT is not set
 # CONFIG_BT_MTKSDIO is not set
+# CONFIG_BT_NXPUART is not set
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 # CONFIG_BTRFS_FS is not set
@@ -1717,9 +1721,11 @@ CONFIG_FUTEX=y
 # CONFIG_FW_CACHE is not set
 # CONFIG_FW_CFG_SYSFS_CMDLINE is not set
 CONFIG_FW_CFG_SYSFS=y
+# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set
 CONFIG_FW_LOADER_COMPRESS_XZ=y
 CONFIG_FW_LOADER_COMPRESS=y
 CONFIG_FW_LOADER_COMPRESS_ZSTD=y
+CONFIG_FW_LOADER_DEBUG=y
 # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
 CONFIG_FW_LOADER_USER_HELPER=y
 CONFIG_FW_LOADER=y
@@ -6124,7 +6130,6 @@ CONFIG_USB_EPSON2888=y
 CONFIG_USB_EZUSB_FX2=m
 # CONFIG_USB_FEW_INIT_RETRIES is not set
 # CONFIG_USB_FOTG210_HCD is not set
-CONFIG_USB_FTDI_ELAN=m
 # CONFIG_USB_GADGET is not set
 CONFIG_USB_GL860=m
 # CONFIG_USB_GPIO_VBUS is not set
@@ -6343,7 +6348,6 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_TEST is not set
 CONFIG_USB_TMC=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_U132_HCD is not set
 CONFIG_USB_UAS=m
 CONFIG_USB_UEAGLEATM=m
 CONFIG_USB_UHCI_HCD=y
@@ -6385,6 +6389,7 @@ CONFIG_VDPA_SIM_NET=m
 # CONFIG_VEML6070 is not set
 CONFIG_VETH=m
 CONFIG_VFAT_FS=m
+# CONFIG_VFIO_AMBA is not set
 CONFIG_VFIO_IOMMU_TYPE1=m
 CONFIG_VFIO=m
 CONFIG_VFIO_MDEV=m

kernel-x86_64-rt-debug-rhel.config

@@ -535,6 +535,7 @@ CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_BREDR=y
 CONFIG_BT_DEBUGFS=y
 CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBCM4377 is not set
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBTSDIO=m
@@ -542,6 +543,7 @@ CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
 CONFIG_BT_HCIBTUSB_BCM=y
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTUSB_MTK=y
+CONFIG_BT_HCIBTUSB_POLL_SYNC=y
 CONFIG_BT_HCIBTUSB_RTL=y
 # CONFIG_BT_HCIUART_AG6XX is not set
 CONFIG_BT_HCIUART_ATH3K=y
@@ -554,12 +556,14 @@ CONFIG_BT_HIDP=m
 # CONFIG_BT_HS is not set
 CONFIG_BT_INTEL=m
 # CONFIG_BT_LEDS is not set
+CONFIG_BT_LE_L2CAP_ECRED=y
 CONFIG_BT_LE=y
 CONFIG_BT=m
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
 # CONFIG_BT_MSFTEXT is not set
 # CONFIG_BT_MTKSDIO is not set
+# CONFIG_BT_NXPUART is not set
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 # CONFIG_BTRFS_FS is not set
@@ -1778,9 +1782,11 @@ CONFIG_FUTEX=y
 # CONFIG_FW_CACHE is not set
 # CONFIG_FW_CFG_SYSFS_CMDLINE is not set
 CONFIG_FW_CFG_SYSFS=y
+# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set
 CONFIG_FW_LOADER_COMPRESS_XZ=y
 CONFIG_FW_LOADER_COMPRESS=y
 CONFIG_FW_LOADER_COMPRESS_ZSTD=y
+CONFIG_FW_LOADER_DEBUG=y
 # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
 CONFIG_FW_LOADER_USER_HELPER=y
 CONFIG_FW_LOADER=y
@@ -6250,7 +6256,6 @@ CONFIG_USB_EPSON2888=y
 CONFIG_USB_EZUSB_FX2=m
 # CONFIG_USB_FEW_INIT_RETRIES is not set
 # CONFIG_USB_FOTG210_HCD is not set
-CONFIG_USB_FTDI_ELAN=m
 # CONFIG_USB_GADGET is not set
 CONFIG_USB_GL860=m
 # CONFIG_USB_GPIO_VBUS is not set
@@ -6470,7 +6475,6 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_TEST is not set
 CONFIG_USB_TMC=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_U132_HCD is not set
 CONFIG_USB_UAS=m
 CONFIG_USB_UEAGLEATM=m
 CONFIG_USB_UHCI_HCD=y
@@ -6512,6 +6516,7 @@ CONFIG_VDPA_SIM_NET=m
 # CONFIG_VEML6070 is not set
 CONFIG_VETH=m
 CONFIG_VFAT_FS=m
+# CONFIG_VFIO_AMBA is not set
 CONFIG_VFIO_IOMMU_TYPE1=m
 CONFIG_VFIO=m
 CONFIG_VFIO_MDEV=m

kernel-x86_64-rt-rhel.config

@@ -535,6 +535,7 @@ CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_BREDR=y
 CONFIG_BT_DEBUGFS=y
 CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBCM4377 is not set
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBTSDIO=m
@@ -542,6 +543,7 @@ CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
 CONFIG_BT_HCIBTUSB_BCM=y
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTUSB_MTK=y
+CONFIG_BT_HCIBTUSB_POLL_SYNC=y
 CONFIG_BT_HCIBTUSB_RTL=y
 # CONFIG_BT_HCIUART_AG6XX is not set
 CONFIG_BT_HCIUART_ATH3K=y
@@ -554,12 +556,14 @@ CONFIG_BT_HIDP=m
 # CONFIG_BT_HS is not set
 CONFIG_BT_INTEL=m
 # CONFIG_BT_LEDS is not set
+CONFIG_BT_LE_L2CAP_ECRED=y
 CONFIG_BT_LE=y
 CONFIG_BT=m
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
 # CONFIG_BT_MSFTEXT is not set
 # CONFIG_BT_MTKSDIO is not set
+# CONFIG_BT_NXPUART is not set
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 # CONFIG_BTRFS_FS is not set
@@ -1762,9 +1766,11 @@ CONFIG_FUTEX=y
 # CONFIG_FW_CACHE is not set
 # CONFIG_FW_CFG_SYSFS_CMDLINE is not set
 CONFIG_FW_CFG_SYSFS=y
+# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set
 CONFIG_FW_LOADER_COMPRESS_XZ=y
 CONFIG_FW_LOADER_COMPRESS=y
 CONFIG_FW_LOADER_COMPRESS_ZSTD=y
+CONFIG_FW_LOADER_DEBUG=y
 # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
 CONFIG_FW_LOADER_USER_HELPER=y
 CONFIG_FW_LOADER=y
@@ -6227,7 +6233,6 @@ CONFIG_USB_EPSON2888=y
 CONFIG_USB_EZUSB_FX2=m
 # CONFIG_USB_FEW_INIT_RETRIES is not set
 # CONFIG_USB_FOTG210_HCD is not set
-CONFIG_USB_FTDI_ELAN=m
 # CONFIG_USB_GADGET is not set
 CONFIG_USB_GL860=m
 # CONFIG_USB_GPIO_VBUS is not set
@@ -6447,7 +6452,6 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_TEST is not set
 CONFIG_USB_TMC=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_U132_HCD is not set
 CONFIG_USB_UAS=m
 CONFIG_USB_UEAGLEATM=m
 CONFIG_USB_UHCI_HCD=y
@@ -6489,6 +6493,7 @@ CONFIG_VDPA_SIM_NET=m
 # CONFIG_VEML6070 is not set
 CONFIG_VETH=m
 CONFIG_VFAT_FS=m
+# CONFIG_VFIO_AMBA is not set
 CONFIG_VFIO_IOMMU_TYPE1=m
 CONFIG_VFIO=m
 CONFIG_VFIO_MDEV=m

sources

@@ -1,3 +1,3 @@
-SHA512 (linux-5.14.0-386.el9.tar.xz) = 2c98f02e11b5bda072c64e1a51b824687cd34a13fe5bd7be502c7e7b7355cbfab70d2df32ff2f22a73541bbf1f3cb94667d74744f34c830a277cbd8cbe4e008c
-SHA512 (kernel-abi-stablelists-5.14.0-386.el9.tar.bz2) = e0c962576c4c65a6fede5297dcefb7053302e7bceec292fa78d0c90cf086d9fe186deb31e3a287733c4b468380be5fa8837090f36467f3d47f218c088dd94355
-SHA512 (kernel-kabi-dw-5.14.0-386.el9.tar.bz2) = 3bc50566f89eafd18aedadb1739f8c9736a61870fa7af0bc1c29c06653187e010a389ccdac85b7263245c689ed1da15bce42a54110f21e7ae9619db9d279e6b5
+SHA512 (linux-5.14.0-387.el9.tar.xz) = d6bbb969475f19840add9846152604a694f7d51785faaff7c6b93d014c777c64bce44a186db2d5a7ce0c4bbcd159581fd5cd47e9fc6ca0248c4dad65e6ec4a9c
+SHA512 (kernel-abi-stablelists-5.14.0-387.el9.tar.bz2) = 56373f7492aa9841e3b464c8f2ced6b0d3031ea005ca1e1575ed8db45445586ed46be531ca5d039217e4ed6f1d850e3dfe9605160159c3be9136053ad38b7a2b
+SHA512 (kernel-kabi-dw-5.14.0-387.el9.tar.bz2) = 3bc50566f89eafd18aedadb1739f8c9736a61870fa7af0bc1c29c06653187e010a389ccdac85b7263245c689ed1da15bce42a54110f21e7ae9619db9d279e6b5