Summary:
These require openQA tap networking to allow the server and
client boxes to communicate, and require masquerading (NAT) so
the server at least can reach a repository (dnf/rolekit really,
really do not want to work without a repo connection).
They use the 'parallel' test support to have the server deploy
run first while the client enrol test waits at the grub menu
until the server is done before it goes ahead.
This is all deployed and working on stg. The really tricky bit
was getting all the openvswitch and firewall config right in
ansible.
We *could* do the server deploy test as a follow-on from the
default install test to save the install, but then we'd have to
teach it to change the hostname and set up static networking
post-install. I'm not sure if it's worth doing that.
This requires the corresponding openqa_fedora_tools commit that
adds the hard disks (containing the kickstarts - it's possible
to get them from remote during install, but we have to set up
name resolution or hard code the IP of the server).
Test Plan:
Deploy this and the openqa_fedora_tools commit,
generate the disks, configure the networking (good luck! See
the docs in openqa_fedora_tools) and see if you can run the
tests. If you're using Docker, uh...sorry. You somehow need to
set things up so the workers can use tap interfaces that can
talk to each other and are NATed to the outside world. Have fun.
I can talk you through it on IRC...
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D831
Summary:
you can't use validate_script_output like this, it doesn't just
return a bool, it actually kills the test if the output doesn't
validate. So any time we didn't have anything in /var/tmp/abrt,
the post_fail_hook would die at that point and not upload the
contents of /var/log as we wanted it to.
Note that even script_output will kill the test if the return
code is >0. That's OK in this case, but always be careful with
these subroutines.
Test Plan:
Run a test that fails in post-install but doesn't
produce anything in /var/tmp/abrt (you may have to artificially
break something). Check that it now uploads /var/log. I noticed
this while working on FreeIPA tests...
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D830
Summary:
First off, this revises the anaconda crash handling needles a
bit. We ditch gtk3195 and update anaconda_error to reflect
current F24/Rawhide. We keep the old anaconda_error around for
now as anaconda_error-23, to handle crashes in the F23 two-week
Atomic nightlies. We also add an 'early' variant, which is for
when (I think) the installer crashes very early, before it's
loaded in GTK+ settings; when that happens, the dialog uses a
different font. The screenshot comes from a recent Rawhide test
that crashed.
We also restore the anaconda `post_fail_hook` code to click
the Report button when a crash happens. This was erroneously
removed in D637. Before the Report button is clicked, the
`anaconda-tb` file exists but the libreport stuff in `/var/tmp`
does not. By removing this, we lost the libreport bits from
the uploaded files, which makes it harder to report crashes. So
let's add it back.
Finally we fix the actual tarring and uploading of `/var/tmp`;
also in D637 this got broken because it was being tarred up in
whatever directory the commands happened to be running in, but
we were still trying to upload it from `/var/tmp`.
https://openqa.stg.fedoraproject.org/tests/8444 was run with
these changes, and has `/var/tmp` correctly uploaded.
Test Plan:
Run some test that crashes, make sure the crash
handling all works correctly.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D768
With the arrival of Pungi 4, the scheduler is no longer using
fedfind-provided BUILD and FLAVOR values, but ones derived from
Pungi properties. BUILD is now simply the Pungi compose_id.
FLAVOR is produced by joining the Pungi variant, type, and
format with '-' characters as the separators.
Pungi, unfortunately, does not treat 'Rawhide' as a release, it
synthesizes a release number for Rawhide composes and places
that in the compose ID. To cope with that, for now, the
scheduler will set RAWHIDE to '1' if the compose is a Rawhide
one. As we have to adapt all places where we parse the release
in any case, this commit consolidates them into a fedorabase
subroutine.
For the one place where we also used to parse the 'milestone'
from fedfind, there is a placeholder get_milestone subroutine
which currently returns an empty string, as I don't yet have a
good handle on how to draw the kinds of distinctions fedfind
mapped to 'milestone' from Pungi metadata.
Summary:
Apparently it'll be something like anaconda.core.(PID). This
should result in that getting compressed and uploaded only if it
exists.
Test Plan:
Try and hit the Mystery Crasher and see if we get the
damn core file this time.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D688
Summary:
When anaconda manages to actually crash the python interpreter,
there should be a /tmp/anaconda.core containing the core dump
(per clumens, see calls to 'gcore' in isys.c). Let's upload it.
This might help us track down the mysterious occasional crashes
openQA seems to trigger (RHBZ #1289704)
Test Plan:
Try and trigger a python crash and see if the
file got uploaded. Of course, I did an entire freaking run on
staging and for *ONCE* not one test hit the mysterious crash,
thanks Murphy. I did at least check that this doesn't break
a 'normal' failure, if the file isn't there things don't
explode.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D686
Summary:
This is a bit icky, but it's the easiest way to solve a problem
I've seen a few times, the latest case being
https://openqa.stg.fedoraproject.org/tests/1664 . In that test,
_console_wait_login logs in to tty1 as user, then uefi_
postinstall wants to switch to tty3 and log in as root. When
it does that, sometimes the check_screen loop in console_login
gets hit before the display has actually switched from tty1 to
tty3, so everything gets out of sync.
An alternative would be to have root_console check that it's
either logged in or at the correct tty before handing off to
console_login, but that starts duplicating stuff, and it breaks
in the case the target tty is logged in as a user and the login
prompt is no longer visible...
Test Plan:
Check all tests run as normal, and maybe run UEFI
tests a few times to see that the bug no longer happens (but
it's hard to reliably trigger it anyway).
Reviewers: garretraziel, jskladan
Reviewed By: jskladan
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D683
Summary:
This is a first cut which more or less works for now. Issues:
1) We're not really testing the BUILD, here. All the test does
is try and upgrade to the specified VERSION - so it'll be using
the latest 'stable' for the given VERSION at the time the test
runs. This isn't really that terrible, but especially for TC/RC
validation, we might want to make things a bit more elaborate
and set up the repo for the actual BUILD (and disable the main
repos).
2) We'd actually need --nogpgcheck for non-Rawhide, at one
specific point in the release cycle - after Branching but
before Bodhi activation (which is when we can be sure all
packages are signed). This won't matter until 24 branches, and
maybe releng will have it fixed by then...if not, I'll tweak
it.
3) We don't really test that the upgrade actually *happened*
for desktop, at the moment - the only thing in the old test
that really checked that was where we checked for the fedup
boot menu entry, but that has no analog in dnf. What we should
probably do is check that GUI login works, then switch to a
console and check /etc/fedora-release just as the minimal test
does.
Test Plan:
Run the tests. Note that creating the desktop disk
image doesn't work ATM, so I can't verify the desktop test
works, but the minimal one seems to (with D565). There'll be
a matching diff for openqa_fedora_tools to update the test
case names there.
Reviewers: jskladan, garretraziel
Reviewed By: jskladan, garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D567
Summary:
since we did this live at Flock today, I figured I'd tidy it
up and submit it. This is an 'optional' test, but some people
do run this way so it'd be nice to have it. This adds another
little helper method in anacondatest.pm, for deleting partitions,
which works much like the others added in previous commits.
Test Plan: Schedule a test run, see if the test runs and works.
Reviewers: jskladan, garretraziel
Reviewed By: jskladan, garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D503
Summary:
This adds three new custom storage tests and some needles to
support them, and tweaks the custom storage methods a bit to
address some things that cropped up in writing the tests. A
new method is added for changing the filesystem, as that's
a distinct operation from changing the device type.
This also restores the previous behaviour of select_disks()
where it handled selecting custom partitioning when needed.
Turns out it's pretty common to use regex'es in perl! Who'd'a
thought.
A corresponding commit to add the tests to openqa_fedora_tools
is coming.
There's no post-install step for the tests yet; I'll try and
write those up and add them soon.
Test Plan:
Do a full run, including the new tests, on Alpha RC2 and check
all are scheduled correctly and run correctly. The LVM thinp
test is expected to fail as it catches a genuine bug.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D490
Summary:
This contains several tweaks to storage handling. It adds a
method for disk selection which all the storage tests can
share. It sets up a more extensible approach for main.pm to
run the storage tests, instead of an ever-growing forest of
'else' clauses. Finally it sets up a couple of methods for
changing partitioning schemes on the custom part screen and
uses one of them in the software RAID test; the other will
be used for other custom storage tests.
This kills the two_disks needle. I could keep it and work
it into select_disks, but it doesn't fit naturally and I
really just don't see the point of the needle. The only thing
we lose is we don't check that anaconda actually sees two
disks in the 'attach two disks, only install to one' test
(that's server_sata_multi), but the other multi-disk tests
will serve to catch that case failing for some reason.
What I actually intended to do was add some more tests for
different custom part storage types, but it seemed a good
idea to do some of this cleanup so that can be implemented
efficiently. I'll have followups for that.
Test Plan:
Run all tests and ensure they work exactly as
before (not just that they still pass, but that the correct
test steps are actually scheduled in each case.)
Reviewers: garretraziel, jskladan
Reviewed By: garretraziel, jskladan
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D475
Summary:
Root console in anaconda got broken by RHBZ #1222413 - no
shell on tty2. Decided to clean up console use in general as
part of fixing it.
This creates a class 'fedorabase' and has 'anacondalog' and
'fedoralog' both inherit from it. boot_to_login_screen is
moved there (as it seems appropriate) and it has a new
method, console_login, which basically handles 'get me a
shell on a console': if we're already at one it returns,
if not it'll type the user name and the password *if
necessary* (sometimes it's not) and return once it sees a
prompt. It takes a hash of named parameters for user,
password and 'check', which is whether it should die if it
fails to reach a console or not (some users don't want it
to).
anacondalog and fedoralog both get 'root_console' methods
which do something appropriate and then call
console_login; both have a hash of named parameters,
anacondalog's version only bothers with 'check', while
fedoralog's also accepts 'tty' to pick the tty to use.
This also adjusts all things which try to get to a console
prompt to use either root_console or console_login as
appropriate.
It also tweaks the needle tags a bit, drops some unneeded
needles, and adds a new 'user console prompt' needle; we
really just need two versions of the root prompt needle
and two of the user prompt needle (one for <F23, one for
F23+ - the console font changed in F23, and the @ character
at least doesn't match between the two). I think we still
need the <F23 case for upgrade tests, for now.
Test Plan:
Do a full test run and see that more tests
succeed. I've done a run on happyassassin with a hack to
workaround the SELinux issue for interactive installs,
and the results look good. I also fiddled about a bit to
test some different cases, like forcing a failure in a
live test to test post_fail_hook (and hence root_console)
in that scenario, and forcing failures after some console
commands had been run to check that it DTRT when we've
already reached a console, etc.
Reviewers: jskladan, garretraziel
Reviewed By: jskladan, garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D462
This requires adding products, flavors and needles and test
cases, and tweaking some existing ones to handle the
slightly different behaviour of live images in shared tests.
To handle the different main hub screens in live and non-live,
a less stringent needle is added which is unregistered for
non-live tests, so they don't match on it before they've
finished updating repository metadata.
There are a few small bugfix tweaks in this too, like some
delays in user creation to try and avoid intermittent failures
there.
A new root_logged_in needle is also included, to handle a new
console font in Rawhide - that has nothing strictly to do with
live testing, it just happened to come up while working on
this.
