I don't know exactly why this sometimes shows up highlighted and
sometimes unhighlighted, but hey, it's not wrong either way, so
we just handle it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We never hit this path without a system menu button any more,
due to changes in KDE over time. It hasn't been hit for two years.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Now both GNOME and KDE do offline updates on all supported
releases, we never see an 'update done' screen any more. This
branch is left over from when the KDE offline update branch was
still conditional on release number.
If we ever implement this test on a desktop that doesn't do
offline updates, we can put this back easily enough.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's no need to do all this 'check whether it's selected and
click it if not' stuff (for three different mount points). Just
always click it. If it's already selected, clicking it again
doesn't hurt (one of these stanzas even clicks it *even if it's
selected*!)
If we need to cover both cases, we just need two needles with
the same tag, we don't need separate code paths. In each case,
though, we actually haven't matched one of the needles for ages
(the most recent was part_boot_selected, but now we're using
GPT by default, we won't hit that any more as it'll be the BIOS
boot partition that's selected by default), so delete the needles
we aren't matching any more. If we *do* hit any case where we
need to handle the 'other' state, we can just add the alternative
needle with the same tag.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This has not been hit for a year (on stg; three years on prod).
I *think* it would only be hit if we ran the test on an Everything
image, but as the test is now specifically associated with the
Server install DVD, that doesn't seem likely to happen.
If we somehow *do* hit ext4 pre-selected again, this can still
be handled simply by adding an alternate
anaconda_blivet_part_fs_ext4 needle which matches on ext4 already
being selected; that avoids the need to keep an alternate code
path around.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This branch is very fragile, because the test won't fail if we
miss the match on the security needle. So in practice, we are
never going to notice when the needle goes stale, and we'll just
wind up never triggering this branch and always going down the
other path. That's the current situation: the security_install
needle last matched more than a year ago at least. Let's just
admit the truth here and drop the branch entirely.
Also update the cockpit_updates_restart_ignore needle. This is
in a similar case - we don't really notice when it goes stale,
as the test completes, it just takes a bit longer - but since
this one is quite easy to find, let's just update it instead of
dropping it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This was resolved upstream and we're no longer hitting this bug
in tests on F38, Rawhide or even F37 respins, so we should no
longer need this workaround.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It looks like neither of these has been a problem for some time.
The notification needle has not matched for a year. The akonadi
needle doesn't exist any more - it was cleaned up in the 2021
needle cleanup, meaning it hadn't matched for weeks in 2021. I
checked the last several months of KDE app start/stop tests and
don't see any case where there was a stray notification that we
missed. So I think we can just ditch this whole mechanism for
now; if we have problems with these notifications again in future
we can put it back.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The last one of these was deleted during the last needle cleanup,
but we do actually still occasionally hit the dialog, e.g. in
https://openqa.fedoraproject.org/tests/1837435/modules/kontakt/steps/3
so let's add an updated version of the needle.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
I think the shade of grey on the background changed. We'll
probably need more needle updates for the compose tests (the
desktop_login test and different languages), but this covers the
update tests.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In today's Rawhide, for some reason, after we delete the first
file, the second file we want to delete is highlighted.
Previously the other file in the directory was highlighted. No
biggie, just handle both cases.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's a difference in the Info page and we get every font
twice on Silverblue because they're present in two locations.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This actually hasn't matched for years, we've been falling back
to ctrl-t the entire time. Happened to notice it today while
debugging https://bugzilla.redhat.com/show_bug.cgi?id=2184549
Signed-off-by: Adam Williamson <awilliam@redhat.com>
These variants only show up when a security update is in play,
so not very often; this happened today, so now we get to update
them for current KDE.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The font rendering on this URL bar seems to be slightly unstable
for some reason. We got a 95% match on this needle in
https://openqa.fedoraproject.org/tests/1846906#step/about/10
so let's just bump the level down a bit.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
...for the GNOME icon theme change. This needle isn't hit very
often so it didn't get updated with the others.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
They've dropped the IRC section from this page. We don't really
need three match areas, just the two is sufficient to identify
it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This test hasn't run for a long time due to
https://bugzilla.redhat.com/show_bug.cgi?id=2151607 , now we got
it working again, almost all the needles need updating.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
If the cursor is visible in the middle of the screen, this would
not match. So move the match area a bit
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Contacts now has two burger menus, which is awkward. We need
specific needles to identify each, we can't rely on the generic
needle any more as it won't always open the right menu. We also
need to still work with the old UI for the flatpak.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
KDE has a welcome tour now, on F38 and Rawhide at least. Let's
"handle" it with extreme prejudice...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We still need to handle 43 only requiring one for now, and we
can't just make it release-dependent until 44 is stable for both
38 and Rawhide, so let's use a needle match temporarily. Only
44 has these eye/pencil icons on this screen.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
These are similar to the changes in F37 and Rawhide, but these
needles are specific to F36 somehow so weren't updated in earlier
rounds.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
KDE live installer started looking different on F37 too so we
need a new needle there, plus we need F39 needles now Rawhide is
F39.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In today's F38 and Rawhide, changes to the persistent overlay
stuff result in a boot warning you have to spam through. Let's
handle this as a soft fail so we don't have floods of failed
tests till it's fixed.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Looks like what happened here is font kerning changed (got
better) in the nm-connection-editor spawned from anaconda.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
A lot of these are because anaconda is more KDE-themed on the
KDE live ISO now. The rest are just miscellaneous appearance
changes to KDE apps in recent Rawhide.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Bike route changed again. For the website opened needle, the
URL bar text seems to keep changing slightly, so instead let's
try matching on the big app logo...hopefully that won't change
as much.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Now we sometimes have to scroll the page down to add the addon,
the Remove button isn't always fully visible behind the popup.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
"Additional repositories" is now hidden behind a dropdown we
have to open first. This will make the test fail on anything
older than Fedora-Rawhide-20230121.n.0, but I don't think we
run this test anywhere that would be a problem.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR adds a small test suite to test the Characters applications.
It displays several different groups of characters and then tries
to copy one of the characters and place it into a text editor.
GNOME Software no longer has a welcome screen in any current
Fedora (it was dropped between 35 and 36), but in Rawhide it now
has a popup that prompts you to enable third-party repos which
we need to get rid of, so just convert the welcome screen check
to handle that, and drop all the welcome screen needles.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This test fails on Rawhide (because sddm-on-wayland) but we just
got an F37 respin, where it passes but needs some needle updates.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
All the deleted ones haven't been matched for five months. Drop
match level to 90 on the remaining ones, we got a 96 match for
one of them in today's respin test.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
I don't know why we wind up with so many slightly different
matches on the login screen. It's weird.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
it's really just a dupe of the -problems needles, it turns out,
Lukas was reinventing that wheel. He had to add another one
today because I broke the JSON in this one when I was simplifying
it yesterday, but I think this one on the new -problems needle
are really just dupes.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
* Scarborough provided quite a messy map that resulted
in frequent needle failure. Changing the location
for something better to make it more reliable.
* The zoom test could have failed with a low resolution
image. Adding some timeout to the needle give more
time to load the proper image.
I think these needles are pretty fragile to changes in the
underlying OSM dataset, not just in Maps itself...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The Rawhide 'accept fate' text seems to have lost its Japanese
translation for some reason (I think the string might have had
a terminating period removed). And in one test, the "Extract"
menu item in Archiver was pre-highlighted so the needle didn't
match. Not sure why, but this doesn't seem like a problem, so
let's just handle it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This reverts the last few commits which worked around a focus bug
in GTK. This bug is now (I hope) fixed, so I'm dropping the
workarounds so the tests will confirm whether it's fixed.
