We worked around it in a different way (installing a Plymouth
theme in the base disk image) so these shouldn't be needed any
more.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's a bug in F34/Rawhide lately where the bootsplash isn't
fully cleared when displaying text consoles, this causes all the
login needles not to match. Add several workarounds to make the
most common cases at least work with the bug, failing on it is
not much use.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In some recent tests the text is rendered slightly differently
for some reason. Not sure why, but I don't see a problem with
just adding a variant needle.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Recent live respins were built with livecd-creator rather than
livemedia-creator because the maintainer had trouble with LMC.
This results in grub looking a bit different, we need a variant
needle for it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Remove a bunch of needles that have not been used for some time,
plus a few workarounds that are similarly stale.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
On Rawhide Cloud_Base boots, there's some SSH key and network
information printed above the 'login:' prompt, so we can't
expect empty space there. Also tweak console_login() to clear
the screen after logging in, so the login prompt is cleared and
doesn't confuse things on subsequent runs (like it did first
time we tried this). And add a new user logged in needle, as it
seems after we clear the screen the tilde appears in a slightly
different position and the existing needle doesn't match.
https://openqa.fedoraproject.org/tests/489003#step/_console_wait_login/7
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This reverts commit f66f510832.
Turns out this breaks lots of stuff, so it needs to go back.
I'll have to figure another way to handle the cloud login.
On Rawhide Cloud_Base boots, there's some SSH key and network
information printed above the 'login:' prompt, so we can't
expect empty space there. Let's just hope not looking for the
empty space doesn't break anything else.
https://openqa.fedoraproject.org/tests/489003#step/_console_wait_login/7
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This adds a whole wodge of stuff to support_server to make it
act as a PXE server, then adds a new test which boots from PXE
and so should hit the PXE server. We use the NFS install repo as
that can be relied on to work for a support_server install.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We want to get accurate results from the rest of the upgrade
test and we know about this bug, so let's make it a soft fail
so we can see how the test is functioning otherwise.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
If a test fails to the dracut shell, we currently don't do
anything useful. This should recognize when that happens, and
upload rdsosreport.txt.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It's my second least favorite day of the year again: Stale
Needle Cleanup Day!
This should get rid of all non-anaconda needles that definitely
are not being used any more. Cleanup of all anaconda needles was
in the previous commit.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The --MORE-- text looks different with the UEFI firmware font,
so we need another needle. Also I named the original needle
wrong, bad me.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Per Neal Gompa boot will proceed if we just page through the
error(?) messages displayed when #1618928 happens, so let's do
that to let the tests get further and see what else is broken.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The background is now blue for ppc64le, so add related needles as bypass.
no such problem with ppc64 (BE)
problem initially detected on Rawhide compose 20180204
but still present on f28 compose 20180302
and Rawhide compose 20180513
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1403365 has been
around approximately forever and I still haven't managed to
debug it; let's just make needles for it, as it's not really a
critical bug, the system still *works*.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
For quite a while on i386 the 'enter passphrase' console screen
has used bright white text, for some reason. Let's just have a
variant needle for this instead of worrying too hard about why.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
...I hope. This is necessary as we now have a case where it
needs to match post-install (aarch64 support_server, since
aarch64 is always UEFI).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Time for an annual spring clean. Based on the admin UI's list
of needles that haven't been matched for a long time, but with
some manual tweaking (some are actually still needed).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Because "Rescue Mount" now replaced by "Rescue Shell" string
in expected rescue screen head.
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
Seems like it doesn't display "Initial setup for Fedora 27" any
more, so the old needle doesn't match. We should look into
whether that's a bug, but for now, let's update the needle.
Matching on the user name really isn't doing much good. It just
means we need more variant needles. Let's ditch that part of the
match and just match on the distinctive character sequence ~]$,
which doesn't really occur for any other reason. With this we
can drop the separate 'qwerty' needle (since the qwerty case
will match the regular needle now) and should also handle the
FreeIPA tests that are failing in Rawhide because a logged in
FreeIPA user doesn't just have a sh prompt now.
* New OFW variable to identify Open Firmware (used by PowerPC)
* Few needles changes for PowerPC support
* as requested do not change the timers value below for PowerPC
tests/install_source_graphical.pm (300 to 600)
tests/_boot_to_anaconda.pm (300 to 1200)
This will be handled by TIMEOUT_SCALE in templates
Signed-off-by: Guy Menanteau <menantea@linux.vnet.ibm.com>
There's a bug in current Rawhide causing sourcing of /etc/bashrc
to fail when logging in as a regular user. This results in the
bash prompt looking different, which is currently a hard fail,
and causes most tests to die. It's better to treat this as a
soft fail so the rest of the test can run. So add a needle to
spot this case, and a little finish function the console login
function calls whenever it's successfully logged in, to check
whether it got the no-profile prompt and register a soft fail.
Summary:
This is to handle cases like #1414904 , where the system boots
to emergency mode. We really need logs to try and debug this.
Test Plan:
Force a test to hit emergency mode somehow (right now
you can just run base_services_start on Rawhide over and over
until you hit #1414904, but there's probably an easier way to
do it, I think there's a systemd boot arg to tell it which target
to boot for e.g.) and check logs get uploaded. Also check this
doesn't break log upload for a 'normal' failure.
Reviewers: garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Reviewed By: garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1103
The F25 'desktopencrypt' images built by createhdds boot to a
console passphrase entry screen, not graphical. F24 images
built the same way boot to a graphical passphrase entry screen.
I'm not sure why, but it's not really worth spending a lot of
energy on, I don't think - let's just add a needle to cover
this case.
Summary:
GNOME's update notification criteria are pretty braindead: it
fires the update check timer once on login then once every hour
thereafter, but only actually checks for and notifies of updates
once a day if it's after 6am(?!?!?!). So we have to do a bunch
of fiddling around to ensure we reliably get a notification.
Move the clock to 6am if it's earlier than that, and reset the
'last update check' timer to 48 hours ago, then log in to GNOME
after that.
Note: I thought this still wasn't fully reliable, but I've looked
into all the recent failures of either test on staging and
there's only one which was really 'no update notification came
up', and the logs clearly indicate PK did run an update check,
so I don't think that was a test bug (I think something went
wrong with the update check). The other failures are all 'GNOME
did something wacky', plus one case where the needle didn't quite
match because I think the match area is slightly too tall; I'll
fix that in a second.
Test Plan:
Run the tests on both KDE and GNOME and check they
work properly now (assuming nothing unrelated breaks, like KDE
crashing...)
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1039
Summary:
I started out wanting to fix an issue I noticed today where
graphical upgrade tests were failing because they didn't wait
for the graphical login screen properly; the test was sitting
at the 'full Fedora logo' state of plymouth for a long time,
so the current boot_to_login_screen's wait_still_screen was
triggered by it and the function wound up failing on the
assert_screen, because it was still some time before the real
login screen appeared.
So I tweaked the boot_to_login_screen implementation to work
slightly differently (look for a login screen match, *then* -
if we're dealing with a graphical login - wait_still_screen
to defeat the 'old GPU buffer showing login screen' problem
and assert the login screen again). But while working on it,
I figured we really should consolidate all the various places
that handle the bootloader -> login, we were doing it quite
differently in all sorts of different places. And as part of
that, I converted the base tests to use POSTINSTALL (and thus
go through the shared _wait_login tests) instead of handling
boot themselves. As part of *that*, I tweaked main.pm to not
require all POSTINSTALL tests have the _postinstall suffix on
their names, as it really doesn't make sense, and renamed the
tests.
Test Plan: Run all tests, see if they work.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1015
