An lvm2 issue which breaks the installer (#2180557) and anaconda
renaming the .desktop file for the Workstation live welcome
screen, which caused it not to appear -
https://pagure.io/livesys-scripts/pull-request/12 .
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Reasoning:
1. pandoc is not in critpath so will not itself be tested
2. pandoc is widely used and actively maintained
3. package is noarch
4. package has minimal deps
Hopefully this will work for everything. For some reason, the
"use python3-blivet for pykickstart tests" fails mysteriously
sometimes, see e.g.
https://openqa.stg.fedoraproject.org/tests/2672282
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Somehow, the dummy package being python3-kickstart causes the
graphical update tests (only) to fail for pykickstart updates
(that's the source package of python3-kickstart). The CLI and
Cockpit update tests are fine with this and pass.
To workaround this, use python3-blivet as the dummy package for
the graphical update tests when testing an update that contains
python3-kickstart. I've updated the test repo to contain both
dummy packages.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
So...there's an ffmpeg update:
https://bodhi.fedoraproject.org/updates/FEDORA-2023-a5e10b188a
which went stable. It includes new sonames of all the ffmpeg
libs. It also pulls in a thing called oneVPL, which has a bug
that breaks ostree composes.
There's a big kf5 update:
https://bodhi.fedoraproject.org/updates/FEDORA-2023-b086a98f78
which contains kf5-kfilemetadata, which is built against ffmpeg.
Neal made sure that update's build of it was built against the
new ffmpeg and submitted both for stable at once - but the tests
on the kf5 update failed because they weren't run against the
new ffmpeg as it wasn't yet stable, and the kf5 update was
ejected from the push because of the failed tests.
So now we have the ffmpeg update stable but not the
kf5-kfilemetadata rebuild for it, which will break KDE stuff,
and the oneVPL issue means ostree composes will all fail.
This adds the ffmpeg update as a workaround so we can re-run the
tests for the kf5 update and get them to pass so we can push it
stable. It also adds the oneVPL update as a workaround so ostree
compose tests don't start failing.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Move the xauth disablement and the disabling of studies into
_setup_browser, instead of repeating it in a couple of other
places (but *not* doing it in the zezere test, where we should
be doing it). Drop some explicit package installs that should
no longer be needed as Firefox and/or X.org now depend on those
things. Install the current default fonts (Noto), not the old
ones (DejaVu).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Just using a scratch build for now as my fix hasn't been reviewed
and may have dumb mistakes in it, but it does seem to fix the
openQA test at least.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
A different way to address the same problem as 56936df7 . Let's
just *remove* the repo management packages after we're done
creating the repos. dnf will automatically remove the unused
dependencies too. This fixes the python-cryptography case at
least - I tested.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's this awkward path for the live image install tests on
updates. We run the 'are the correct versions of all the packages
installed' check on these tests to ensure the right versions
actually made it onto the live image. So we don't run
`dnf -y update` at the end of repo_setup_updates on that path,
because if we did that, even if the packages on the live image
were old, we'd update them there and hide the problem.
However, this causes a bit of an ordering issue, because in
order to set up the advisory repo, we need to install a few
packages. What if the update under test includes one of those
packages, or a dependency that wasn't already installed? In
that case, we wind up with the older stable version of the
package (because obviously we can't install the newer version
from the advisory repo *before we've set up the advisory repo*),
don't update it later, and so the 'correct version' check at
the end of the test fails. See:
https://openqa.fedoraproject.org/tests/1778707 for a case of
this happening with a python-cryptography update.
Up till now I was trying to handle this by just updating the
specific packages we install, but that doesn't account for
*dependencies* of them. I looked down the path of trying to
generate a list of all those dependencies and update all of
them but it looks a bit mad. So instead let's try this. On that
specific path, we'll generate the "all installed packages" list
*before* we run repo_setup, so it just doesn't include anything
that gets installed during repo_setup. The implementation is a
bit icky but not too horrible.
We *could* just *always* generate the all installed packages
list earlier, but then that would mean we *wouldn't* catch dep
issues in this kind of package on the other test paths, whereas
currently we do. I don't want to lose that.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is to handle a temporary condition where the screen isn't
present on the KDE base disk images for F38 or F39 yet, so they
only see it on the second boot on update tests, but don't handle
it because we marked it as already 'done'.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
KDE has a welcome tour now, on F38 and Rawhide at least. Let's
"handle" it with extreme prejudice...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The F38 update that breaks this hasn't gone stable due to gating
and the F39 update will be pulled in once the tests are done
and it goes stable, but doing this anyway so I can re-run the
tests on the F38 plasma-workspace update and push it stable,
and rerun all the failed Rawhide tests without waiting for all
the tests on this update to finish first.
We still need to handle 43 only requiring one for now, and we
can't just make it release-dependent until 44 is stable for both
38 and Rawhide, so let's use a needle match temporarily. Only
44 has these eye/pencil icons on this screen.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
As we're not getting composes ATM this isn't being pulled into
tests of subsequent updates, but we need it to be or else there
are issues.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
With Rawhide updates, we quite often run into a situation where
a test runs after a *later* version of the package has already
gone stable. This even happens for stable releases too, though
less often. The current shell-based check just always fails on
this case, but it's usually OK, and manually marking every case
like this with an "it's OK!" comment gets tiring. Instead, let's
use a smarter Python script to do the check. We compare the EVR
of all installed update packages with the EVR of the package
from the update. If it's the same, fine. If the installed package
is lower-versioned, that's always an error, and we fail. If the
installed package is higher-versioned, we check whether the
update already went stable. If it did, then we soft fail, because
probably nothing can go wrong at this point (this is the usual
Rawhide case). If the update did not yet go stable, we still
hard fail, because something can go wrong in this case: if the
update *now* goes stable, the older version from the update may
be tagged over the newer version the test got (presumably from
current stable).
If anything goes wrong with the Bodhi check, or the test is
running on a task not an advisory, we treat both cases as fatal.
The script also gives easier-to-understand output than the old
approach, which should be a bonus.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Same conditions as used in main.pm to load the tests in the
normal flow. It makes no sense to do this on non-update tests,
or on the non-matching support server case.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is safer if the advisory stuff was done on a previous test
run. Hilariously, this exposed a dumb mistake I made years ago
in installedtest.pm and never noticed before: the calls to
advisory_* at the bottom of that file are meant to be in the
post_fail_hook, but they weren't, which meant they got called
by the scheduler. This didn't cause any failures because the
first line caused them to return immediately based on a get_var
call (which it's OK to do in the scheduler), but changing it
to a script_run call (which it's *not* OK to do in scheduling)
caused all the tests to blow up immediately and confused me
*a lot* until I spotted this!
Signed-off-by: Adam Williamson <awilliam@redhat.com>
When I enabled _advisory_post for live and ostree install tests,
the point was to check that updated packages were included in
the install media and used during installation. We shouldn't run
a system update in _repo_setup_updates on this path because it
will hide the problem if the updated packages weren't included.
The INSTALL variable is for this purpose - it was previously
used to skip _advisory_post on the same path. At the same time
let's remove some stray settings of this var on non-update tests
as it serves no purpose there.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Per discussion at https://pagure.io/fedora-ci/general/issue/376
it really feels like this is the right thing to do. There are no
buildroot overrides for Rawhide, so we don't have to worry about
cross-pollution. The buildroot repo only contains builds that
have been tagged stable since the most recent Rawhide compose,
and thus will go into the next one. It makes sense to test later
updates against these. This avoids issues like:
https://openqa.fedoraproject.org/tests/overview?distri=fedora&version=38&build=Update-FEDORA-2022-30a952e331&groupid=2
where the tests of an update failed because it requires another
update which had been submitted and tagged stable previously, but
after the last compose.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Also use get_var("TEST") for installer_build - no point trying
to upload these logs for the other tests in the same flavor,
they won't be there.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is like the existing tests that build network install and
live images then install them, only for Silverblue. First we
build an ostree, using the standard configuration for the release
and subvariant but with the 'advisory' and 'workarounds' repos
included, so it will contain current stable packages plus the
packages from the update and any workarounds. Then we build an
ostree installer image with the ostree embedded, again including
advisory and workarounds repos in the installer build config so
packages from them will be included in the installer environment.
The image is uploaded, which completes the _ostree_build test.
Then an install_default_update_ostree test runs, which does a
standard install and boot from the installer image.
We do make a change that affects other tests, too. We now run
_advisory_post on live image install tests, as well as this new
ostree install image install test. It was skipped before because
of an exception that's really only needed for the netinst image
install test. In that test, packages from the update won't be
included in the installed system, so we can't run _advisory_post
on it. But for ostree and live image build/install tests, the
installed system *should* include packages from the update, so
we should check and make sure that it does.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's no need to run this twice (which can happen on some
paths), so if the first file already exists, just bail. Also,
don't bother uploading the config files any more - that was just
for debug while I was making this stuff work, now it works, and
this saves some time.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's one point in the tests where we may log into cockpit for
the second time in one run (it depends how a package update
process goes). When this happens, we don't get prompted again
for admin access, so we need to *not* expect that.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
