This uses a Python script which implements concurrent downloads
(via asyncio) to download workaround and update packages and
configure the repos. This should speed up the process for large
multi-package updates.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This effectively reverts 97618193 - but had to be done manually
and adjusted to maintain support for testing side tags and for
testing multiple tasks, since those features were added since
the update ISO change.
The 'scheduler injects ISOs of packages into the tests' approach
was intended to speed things up, especially for large updates,
and it did, but it had a few drawbacks. It means restarting
older tests from the web UI doesn't work as the ISOs get garbage
collected (you have to re-schedule in this case). And it has the
rather large problem that you can now only schedule tests from
the openQA server (or at least a machine with the openQA asset
share mounted), because the package download and ISO creation
just happen wherever the scheduler is running and assume that
the openQA asset share that will be used by the tests is at
/var/lib/openqa/share in that filesystem.
That's too big of a drawback to continue with this approach, IMO,
so this reverts back to the old way of doing things, with a bit
of refactoring to clean up the flow a little, and with support
for testing side tags and multiple tasks maintained.
As a follow-up I'm going to see if I can replace
_download_packages with a much more efficient downloader script
to mitigate the time this process takes on each test, especially
for large updates.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Seems the bug might just be that plymouth got more sensitive to
fast typing, so instead of waiting, let's try slow typing.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
New Plymouth seems to have a bug where it shows the decryption
prompt briefly then shows a spinner and refreshes it, throwing
away any already-typed input. This is breaking our tests quite
often (any time os-autoinst is "lucky" enough to spot the first
brief appearance of the prompt and start typing). To work around
it, after we first see the prompt, wait for the screen to settle
and re-assert the needle before typing. This should reliably
wait out the refresh cycle.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Plasma 6's color chooser seems to have dropped the nice "basic
colors", so choosing black got harder. Let's try using the HTML
color input box thingy instead, and typing #000000, the HTML
color code for black.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR tries to respond to issue #294.
On Silverblue, this will try:
* flatpak install
* flatpak remote-add
* flatpak list
* flatpak remotes
* flatpak remove
* flatpak update
and also it tests that a flatpak can be built.
Currently, the installation via WebUI is mostly pushing the Next button
which seems to be ok for the production which is based in the US.
This PR makes openQA to select languages when the G-I-S runs
before Anaconda. The particular language is selected based on
the LANGUAGE variable.
The latest version of g-i-s grew a "Previous" button on the
final page, and hitting tab once now activates that, not the
Try button. shift-tab *should* get us to Try on both old and
new versions.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
webUI has been deferred to F40, so we need to expect the old UI
flow on F39 now. This should cover everything, I hope.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We're reverting webUI for Fedora 39.
https://bodhi.fedoraproject.org/updates/FEDORA-2023-73c4f1a802
is the update that implements this; adapt the tests to handle it
(by expecting the old flow when testing that update, and editing
the kickstart to drop anaconda-webui when building the live
image).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We now have a fix for the bug on the new webUI flow where the
language and keyboard screens weren't skipped on the first boot
after install, as intended. language is never *really* skipped -
it just turns into welcome - but keyboard is now being skipped,
which messes up the logic here.
For a short time we need to handle both paths, to get the new
anaconda builds through and new composes built. In a couple of
days we can simplify this to just always assume keyboard will
be skipped on the first boot on Workstation live installs on
F39+.
Also drop handling of auth_required in g-i-s - I'm pretty sure
that bug got fixed years ago - and wait_still_screen for three
seconds on each page, to let animated transitions settle.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We just landed the webUI stuff for F39, so now we need these
conditionals to kick in for F39+, not F40+.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is tailored to the initial deployment of webUI in
Workstation live images only; we may need to tweak flows and
approaches as webUI goes further.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Per https://bodhi.fedoraproject.org/updates/FEDORA-2023-5fd964c1bf#comment-3149533
we kinda need to do this to allow this update through, so long as
we're not going to have dnf obsolete dnf5 or anything like that.
It's a bit unfortunate but I don't see an alternative.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We're seeing a lot of tests fail on 404s when trying to access
the koji-rawhide repo (the repo for the Rawhide build tag, which
we use to get packages tagged since the last compose. nirik is
trying to figure this out from the server end, but for now at
least, let's mark the repo as skip_if_unavailable. This should
mean that if we hit a 404, the test will continue, it just won't
have access to the packages from that repo. Occasionally this
will cause a problem - a false failure or false pass - but this
still seems better than every test that hits it failing. The
false pass case is the most concerning, but I would hope in that
case some other tests from the same update would fail, making it
not an issue.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Per nirik, 'repos/rawhide' is just a symlink to 'repos/fXX-build'
and this could possibly be part of our 404 problem. So let's
try using fXX-build directly instead of the symlink.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This repo gets regenerated a lot, so we should be very aggressive
about metadata expiry. Hopefully this will forestall most of
the cases where we get a 404 trying to access this repo's
metadata files.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We're still getting failures from pagure.io even with the retry
stuff. nirik asked us to add this to help figure out what the
heck is going on there.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This tweaks all pagure.io downloads to be retried a few times,
since we seem to be getting failures quite often. We use curl
for this as it has nice options for it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We drop the line for the update ISO from /etc/fstab before
uploading the image after the cockpit_default test, but we don't
make sure it's set up again before Cockpit tries to use it, in
the subsequent Cockpit tests. I don't know why this didn't fail
on stg before, but it sure as hell is failing in prod...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
I'm attempting a new approach to the update and workaround repos.
Instead of having each update test recreate them for itself -
which is slow and wastes bandwidth - the dispatcher will create
an ISO at test schedule time and pass it as ISO_2. Then the test
just mounts the ISO. This makes the necessary adjustments on the
test side.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Drop the e2fsprogs scratch build workaround we were using for
https://github.com/fedora-silverblue/issue-tracker/issues/470 -
with the new 'use a custom ref and rebase to the official ref'
thing I implemented for update ostree tests, it shouldn't be
necessary any longer.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
I think this is new behaviour in rpm 4.19, or else we would have
run into this before when testing an s390utils update. But it's
easy enough to handle.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
F36 is now EOL, and from F37 onwards, grub is the bootloader in
any situation where it actually matters to do_bootloader (which
is only when we're editing parameters). We do still use syslinux
in the PXE tests on x86_64 BIOS, but we don't edit the parameters
in that case.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It looks like neither of these has been a problem for some time.
The notification needle has not matched for a year. The akonadi
needle doesn't exist any more - it was cleaned up in the 2021
needle cleanup, meaning it hadn't matched for weeks in 2021. I
checked the last several months of KDE app start/stop tests and
don't see any case where there was a stray notification that we
missed. So I think we can just ditch this whole mechanism for
now; if we have problems with these notifications again in future
we can put it back.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
For several releases now, the 'new user mode' of g-i-s is just
gone: https://gitlab.gnome.org/GNOME/gnome-initial-setup/-/issues/12
so this whole path where we used to be able to set up Japanese
input methods on first boot after install doesn't work any more.
We had to set up a whole different route to set the input method
via control center instead (which lives in _graphical_input).
This block is never reached any more, and the needles for it were
cleaned up in 2021.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Since 022865ab we do not use start_with_launcher on KDE any more.
The needle for it has since got lost in an unused needle
cleanup. Let's just drop this branch for now; we can add it back
if we ever need it again.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's a fairly longstanding issue in GDM where switching layout
just doesn't work sometimes:
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/6066#note_1707051
there doesn't seem to be any progress on getting this fixed, and
it's annoying constantly restarting tests that fail on it. So
this just makes us try three times to switch before giving up.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
An lvm2 issue which breaks the installer (#2180557) and anaconda
renaming the .desktop file for the Workstation live welcome
screen, which caused it not to appear -
https://pagure.io/livesys-scripts/pull-request/12 .
Signed-off-by: Adam Williamson <awilliam@redhat.com>
So...there's an ffmpeg update:
https://bodhi.fedoraproject.org/updates/FEDORA-2023-a5e10b188a
which went stable. It includes new sonames of all the ffmpeg
libs. It also pulls in a thing called oneVPL, which has a bug
that breaks ostree composes.
There's a big kf5 update:
https://bodhi.fedoraproject.org/updates/FEDORA-2023-b086a98f78
which contains kf5-kfilemetadata, which is built against ffmpeg.
Neal made sure that update's build of it was built against the
new ffmpeg and submitted both for stable at once - but the tests
on the kf5 update failed because they weren't run against the
new ffmpeg as it wasn't yet stable, and the kf5 update was
ejected from the push because of the failed tests.
So now we have the ffmpeg update stable but not the
kf5-kfilemetadata rebuild for it, which will break KDE stuff,
and the oneVPL issue means ostree composes will all fail.
This adds the ffmpeg update as a workaround so we can re-run the
tests for the kf5 update and get them to pass so we can push it
stable. It also adds the oneVPL update as a workaround so ostree
compose tests don't start failing.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Just using a scratch build for now as my fix hasn't been reviewed
and may have dumb mistakes in it, but it does seem to fix the
openQA test at least.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
A different way to address the same problem as 56936df7 . Let's
just *remove* the repo management packages after we're done
creating the repos. dnf will automatically remove the unused
dependencies too. This fixes the python-cryptography case at
least - I tested.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's this awkward path for the live image install tests on
updates. We run the 'are the correct versions of all the packages
installed' check on these tests to ensure the right versions
actually made it onto the live image. So we don't run
`dnf -y update` at the end of repo_setup_updates on that path,
because if we did that, even if the packages on the live image
were old, we'd update them there and hide the problem.
However, this causes a bit of an ordering issue, because in
order to set up the advisory repo, we need to install a few
packages. What if the update under test includes one of those
packages, or a dependency that wasn't already installed? In
that case, we wind up with the older stable version of the
package (because obviously we can't install the newer version
from the advisory repo *before we've set up the advisory repo*),
don't update it later, and so the 'correct version' check at
the end of the test fails. See:
https://openqa.fedoraproject.org/tests/1778707 for a case of
this happening with a python-cryptography update.
Up till now I was trying to handle this by just updating the
specific packages we install, but that doesn't account for
*dependencies* of them. I looked down the path of trying to
generate a list of all those dependencies and update all of
them but it looks a bit mad. So instead let's try this. On that
specific path, we'll generate the "all installed packages" list
*before* we run repo_setup, so it just doesn't include anything
that gets installed during repo_setup. The implementation is a
bit icky but not too horrible.
We *could* just *always* generate the all installed packages
list earlier, but then that would mean we *wouldn't* catch dep
issues in this kind of package on the other test paths, whereas
currently we do. I don't want to lose that.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is to handle a temporary condition where the screen isn't
present on the KDE base disk images for F38 or F39 yet, so they
only see it on the second boot on update tests, but don't handle
it because we marked it as already 'done'.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
KDE has a welcome tour now, on F38 and Rawhide at least. Let's
"handle" it with extreme prejudice...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The F38 update that breaks this hasn't gone stable due to gating
and the F39 update will be pulled in once the tests are done
and it goes stable, but doing this anyway so I can re-run the
tests on the F38 plasma-workspace update and push it stable,
and rerun all the failed Rawhide tests without waiting for all
the tests on this update to finish first.
We still need to handle 43 only requiring one for now, and we
can't just make it release-dependent until 44 is stable for both
38 and Rawhide, so let's use a needle match temporarily. Only
44 has these eye/pencil icons on this screen.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
As we're not getting composes ATM this isn't being pulled into
tests of subsequent updates, but we need it to be or else there
are issues.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
With Rawhide updates, we quite often run into a situation where
a test runs after a *later* version of the package has already
gone stable. This even happens for stable releases too, though
less often. The current shell-based check just always fails on
this case, but it's usually OK, and manually marking every case
like this with an "it's OK!" comment gets tiring. Instead, let's
use a smarter Python script to do the check. We compare the EVR
of all installed update packages with the EVR of the package
from the update. If it's the same, fine. If the installed package
is lower-versioned, that's always an error, and we fail. If the
installed package is higher-versioned, we check whether the
update already went stable. If it did, then we soft fail, because
probably nothing can go wrong at this point (this is the usual
Rawhide case). If the update did not yet go stable, we still
hard fail, because something can go wrong in this case: if the
update *now* goes stable, the older version from the update may
be tagged over the newer version the test got (presumably from
current stable).
If anything goes wrong with the Bodhi check, or the test is
running on a task not an advisory, we treat both cases as fatal.
The script also gives easier-to-understand output than the old
approach, which should be a bonus.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is safer if the advisory stuff was done on a previous test
run. Hilariously, this exposed a dumb mistake I made years ago
in installedtest.pm and never noticed before: the calls to
advisory_* at the bottom of that file are meant to be in the
post_fail_hook, but they weren't, which meant they got called
by the scheduler. This didn't cause any failures because the
first line caused them to return immediately based on a get_var
call (which it's OK to do in the scheduler), but changing it
to a script_run call (which it's *not* OK to do in scheduling)
caused all the tests to blow up immediately and confused me
*a lot* until I spotted this!
Signed-off-by: Adam Williamson <awilliam@redhat.com>
When I enabled _advisory_post for live and ostree install tests,
the point was to check that updated packages were included in
the install media and used during installation. We shouldn't run
a system update in _repo_setup_updates on this path because it
will hide the problem if the updated packages weren't included.
The INSTALL variable is for this purpose - it was previously
used to skip _advisory_post on the same path. At the same time
let's remove some stray settings of this var on non-update tests
as it serves no purpose there.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Per discussion at https://pagure.io/fedora-ci/general/issue/376
it really feels like this is the right thing to do. There are no
buildroot overrides for Rawhide, so we don't have to worry about
cross-pollution. The buildroot repo only contains builds that
have been tagged stable since the most recent Rawhide compose,
and thus will go into the next one. It makes sense to test later
updates against these. This avoids issues like:
https://openqa.fedoraproject.org/tests/overview?distri=fedora&version=38&build=Update-FEDORA-2022-30a952e331&groupid=2
where the tests of an update failed because it requires another
update which had been submitted and tagged stable previously, but
after the last compose.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is like the existing tests that build network install and
live images then install them, only for Silverblue. First we
build an ostree, using the standard configuration for the release
and subvariant but with the 'advisory' and 'workarounds' repos
included, so it will contain current stable packages plus the
packages from the update and any workarounds. Then we build an
ostree installer image with the ostree embedded, again including
advisory and workarounds repos in the installer build config so
packages from them will be included in the installer environment.
The image is uploaded, which completes the _ostree_build test.
Then an install_default_update_ostree test runs, which does a
standard install and boot from the installer image.
We do make a change that affects other tests, too. We now run
_advisory_post on live image install tests, as well as this new
ostree install image install test. It was skipped before because
of an exception that's really only needed for the netinst image
install test. In that test, packages from the update won't be
included in the installed system, so we can't run _advisory_post
on it. But for ostree and live image build/install tests, the
installed system *should* include packages from the update, so
we should check and make sure that it does.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's no need to run this twice (which can happen on some
paths), so if the first file already exists, just bail. Also,
don't bother uploading the config files any more - that was just
for debug while I was making this stuff work, now it works, and
this saves some time.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is simpler if we just always lowercase $iso, plus it saves
us when somebody (*cough*) messes up the casing.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
mock 3.2 does not allow running as root. This breaks the live
image build tests. It's being reverted upstream, this scratch
build has the reversion backported.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
desktop-backgrounds update went stable, but we also need an
f37-backgrounds update which was only just submitted to fix the
problem.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
podman tests are currently failing for all Rawhide updates. Not
sure what triggered this, but this update seems to fix it, though
it's failing its own test suite so not yet being pushed stable.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We use variables to track test state across modules, sometimes.
As this is all internal to the test logic I didn't bother always
making these variables upper-case, but os-autoinst now treats
lower-case variables as a fatal error, so we have to change.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This issue appeared when we started testing Rawhide updates, but
I only noticed it today. When testing Rawhide updates after
Branch point, the upgrade tests upgrade from Branched to Rawhide.
On Branched, updates-testing is enabled by default. We only
disable it when we reach `upgrade_run`, but by that point we've
already done a `dnf -y update` in `upgrade_preinstall` and
potentially installed other packages in steps between
`upgrade_preinstall` and `upgrade_run`. That can cause problems,
like today all FreeIPA upgrade tests on Rawhide are failing
because there's a newer freeipa in updates-testing for F37 than
is in the current Rawhide compose.
Solve this by disabling updates-testing before we do the update
in `upgrade_preinstall`. To avoid excessive code duplication,
factor out the repo disabling code.
We'll do this twice on upgrade tests now, but it shouldn't be a
problem.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
samba-client-libs with an soname bump made today's Rawhide, a
freeipa rebuilt against it did not, so we need this in overrides
or all FreeIPA tests fail on all Rawhide updates.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Editing the files under /ostree/deploy doesn't work on Rawhide
any more because it's been made read-only. Thanks to Timothée
Ravier for pointing out this way of doing it, which is better
anyway and avoids awful quotation issues in the code.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
A samba update was pushed for F37 without rebuilds of sssd and
freeipa (which needed to be rebuilt against it). Tests of any
of those updates on its own will fail, so including them all as
workarounds so the tests for each should work. I'll make sure
they all get pushed stable.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The file conflict between older webkit2gtk4.1-jsc and new
javascriptcoregtk4.1 is causing all Workstation update tests to
fail on all Rawhide updates. This new version of webkitgtk adds
obsoletes to javascriptcoregtk4.1 which we hope should fix it.
Adding the x86_64 build directly as other arches aren't done
yet, and we only run the Workstation update tests on x86_64
anyway.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
openQA choked badly on
https://bodhi.fedoraproject.org/updates/FEDORA-2022-6256981a71
because it's, well, huge - 87 builds including texlive, which
has hundreds (thousands?) of subpackages. This exposed several
frailties against such updates.
First of all, we set NUMDISKS to at least 2 for *all* update
tests, which should mean they all stash the RPMs from the update
on a non-system disk and avoid problems with space exhaustion.
After that, just extend a few timeouts in particularly fragile
places, including one which is specific to texlive (as I don't
know of any other source package with so many subpackages).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
F35 to F36 FreeIPA server upgrade test is failing because the
latest F36 package is lower-versioned than the latest F35
package, and FreeIPA's upgrade scripts are written to fail if
this is the case. The update bumps the F36 NVR to be higher
than the F35 one.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
bodhi-client should depend on it, but technically since we have
code that calls `koji` directly here, we should probably also
include it in our install anyway, so not marking this as a
workaround.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR changes the way to download the test data into the VM.
Although it does not use a disk image as suggested in one
of the review, it does not clone the entire repository, but
a simple tar.gz file that holds the data which will be
distributed into the directory structure.
This way, the amount of data needed to be downloaded dropped
from approximately 50MB to below 2MB.
Also, the existing test suites were adapted to this situation.
Now we've ditched syslinux in Rawhide, we should just always
expect to see grub if release number is > 36.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It seems when we quit Firefox back to a VT on ppc64le, the system
hangs. Not sure why, but we can deal with it by rebooting the
system and logging back in as root if it happens. Also take the
opportunity to clean up the flow of quit_firefox so we always
check that we get back to a console then wait 5 seconds for the
console to settle, so all the tests that call it can stop doing
that.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
After typing the username, on some Rawhide tests, it's taking
over 30 seconds for the password prompt to appear. This isn't
ideal but we don't want the test to fail on this. Give it up
to 45 seconds.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Wow, so the real way to do config overrides is, uh...obscure.
One file pointing to another file, both with mandatory comment
lines and one with a weird required value. Wat. Anyway, this
works in a VM. I still don't know why the policy for the first
run page isn't working as advertised.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The new way isn't working, so put the old way back but change it
to use user_pref instead of pref to see if that helps, and upload
the files for checking.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Thanks to Mike Kaply in
https://bugzilla.mozilla.org/show_bug.cgi?id=1703903#c18 , this
should avoid Quick Suggest onboarding, "Total Cookie Protection"
onboarding, and future annoying things using the same mechanisms
without using the prefs mechanism or going after each one case
by case.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
I meant to include this in the earlier commit that does the same
for type_very_safely, but forgot.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
I noticed today that we're timing out all the time on these
wait_still_screens in gnome-terminal, because it uses a big
flashing cursor and the similarity between "cursor there" and
"cursor not there" is less than 45 or 42 (it seems to be 38.x).
So let's drop these levels to 38, hopefully that's not too low.
There are probably more places where this is an issue, I'll
change them as I notice them.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We can't use the default similarity_level for wait_still_screen
when there's a flashing cursor - flashing cursor will always
cause the similarity level to be too low and the wait will just
time out at 30 seconds. Cut it to 42.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
check_desktop tries to catch when the overview is open and close
it. But with GNOME 42, it seems the inactive "Activities" button
is shown briefly on login before GNOME opens the overview. If
check_desktop catches that, it will think the overview isn't
open and it doesn't need to do anything. So if we match on first
cycle through the loop, let's wait_still_screen then match again.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
So these kind of things go through perl *and* bash string
interpretation and the escaping can get pretty wacky. Turns out
we need *eight* slashes here to get four through to bash (which
we need to deal with *sed*'s escaping rules), and it only works
in single quotes for some reason, not double quotes.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's a bug in rpm where doing `rpm -q [NVRA]` doesn't work
if the NVRA contains a caret. To make it work you have to add
a literal slash character before the caret character, so we add
a sed command to do that, when we're checking whether packages
from the update actually got installed.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Scratch build because we don't have a single-build update with
the fix, it's likely gonna be included in the 5.24.2 megaupdate.
I don't want to use that whole thing as a workaround, so I did
a 5.24.1 scratch build with the fix instead.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The intent is that if the ps check finds nothing we'll use the
loginctl output, but that doesn't work because script_output
doesn't return the output if the script fails. There's an arg
you can pass to make it do so, but let's just make it always
succeed instead, by adding a ||: to the second grep like we have
for the first.
Also, I noticed this problem because the ps check started not
working on F36 KDE because none of the processes we check for
are shown as running on a tty, so let's add one more that *is*
shown as running on a tty...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
