The 'universal' flavor has been kinda pointless for some time
now. It dates back to the earliest days of openQA, before Pungi
4 was a thing, when composes were very different; we only built
a boot.iso and some live images nightly for Rawhide, these
weren't even formally grouped as a 'compose' at all (fedfind had
to invent the concept). The TCs/RCs had DVD installer images
(not *Server* DVD, at the time, just a universal DVD installer).
We wanted to run some tests on the DVD image if it was available,
but we still wanted to run them for the nightlies, so we invented
a whole mechanism for that - this 'universal' flavor, with some
complicated logic in fedora_openqa which schedules universal on
the 'best available' image it can find in the compose.
All this is functionally obsolete now. All composes we test are
now run through Pungi (except the live respins, but they aren't
relevant here). In current config, the Server DVD is non-failable
on x86_64 and aarch64, which means it will *always be there* -
if it fails to build, the compose itself fails, so we won't test
it. It's failable for ppc64le, but we don't care that much about
ppc64le; I'm fine with these tests just not running if the Server
DVD happens to fail in a ppc64le compose.
As a cherry on top, some of the 'universal' tests aren't really
universal anyway, they fail if you run them on a netinst (off
the top of my head, all the NFS install tests are like this, as
we use the ISO to populate the NFS share on the server end).
So let's just move all the tests that actually need an installer
image to the Server-dvd-iso flavor. Left over in the 'universal'
flavor are upgrade tests, which don't need an ISO at all - they
boot from hard disk images and run an upgrade using repos. We
can change the scheduler logic to be more simple for these, and
just always schedule them, with no ISO attached. We could even
rename this flavor 'upgrade', but it might not be worth it.
One slight complication is that the split happened to be helping
us avoid too many tests in a single support_server cluster; we
have a cluster of five support_server tests on Server-dvd-iso
and five support_server tests on universal. I try to avoid the
clusters getting too big as you need as many worker instances on
at least one worker host as your largest cluster; if you don't
have that many, the cluster's tests simply never get scheduled.
Requiring folks to have at least ten worker instances on one
host to run these tests is a bit of a big ask. So, to handle
that, we create a support_server_2 and have the former universal
tests use that one instead, so we'll have two separate clusters
on Server-dvd-iso now.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We no longer build 32-bit ARM images and we hadn't had a working
setup for testing them for years anyway.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Upstream https://github.com/os-autoinst/openQA/pull/4973 requires
us to poke things here a bit. This only works with the newer
os-autoinst and openQA (there may be a way to conditionalize it
to work with both, but I can't be bothered figuring it out, let's
just update).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This keeps failing on the accessibility section, and looking at
the screenshots I realized why. When you press 'down', GNOME
doesn't just 'snap' to the new view, it does a smooth downward
scroll. We're often matching *while it's scrolling*, so the
needle match is right at the bottom of the screen. But then the
animation continues, so when we get to the click action (even
though we use click_lastmatch it's not *instant* in openQA),
the thing we're trying to click (the "Accessibility" section
title) is a bit further up the screen, and the click 'misses'.
So, we need to wait out the scroll then re-assert and click.
This unfortunately will make the test take about 30 seconds
longer, but I don't see another way to do it. We could maybe
shave the wait_still_screen to one second...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
I think the shade of grey on the background changed. We'll
probably need more needle updates for the compose tests (the
desktop_login test and different languages), but this covers the
update tests.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Similar to the dedicated tests for these apps, the app can appear
for a split second before the access request, so we match on the
app and don't realize we need to click through the access
request. Handle this the same way we do in the dedicated tests.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In today's Rawhide, for some reason, after we delete the first
file, the second file we want to delete is highlighted.
Previously the other file in the directory was highlighted. No
biggie, just handle both cases.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's a difference in the Info page and we get every font
twice on Silverblue because they're present in two locations.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Another message changed format a bit, and all the messages are
now showing up in syslog instead of packaging.log, so handle
all possibilities here. I had to split the first check into two
commands because I can't seem to make it work if I try and do it
all in one command with bracket groups :/
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We actually get a softfail because we're expecting it; now it's
been fixed not to show up, drop the code that expects it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We're constantly seeing this test fail on an odd problem where
text editor starts *behind* characters. To handle this, check
if we see text editor and if not, hit alt-tab.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This actually hasn't matched for years, we've been falling back
to ctrl-t the entire time. Happened to notice it today while
debugging https://bugzilla.redhat.com/show_bug.cgi?id=2184549
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It always launches in basic mode anyway, and sometimes this key
press doesn't work right and leaves a stray 'b' in the entry
field, which messes things up when we get to the calculation
tests.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
These variants only show up when a security update is in play,
so not very often; this happened today, so now we get to update
them for current KDE.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's a fairly longstanding issue in GDM where switching layout
just doesn't work sometimes:
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/6066#note_1707051
there doesn't seem to be any progress on getting this fixed, and
it's annoying constantly restarting tests that fail on it. So
this just makes us try three times to switch before giving up.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This group was only added to comps today, so it's not in the
comps in the rawhide repo yet (will be after next compose). The
Koji repo doesn't have normal comps so it's not there either.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Try and make sure maximize actually works - wait for still screen
after hitting Done and before trying to maximize.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's a failure mode we hit quite often where, when we run
the text editor after copying the character, it pops up *behind*
the character page. So let's close the page first. When we click
the 'Copy Character' button a notification that the character was
copied is briefly displayed and if we hit esc while it's visible
we dismiss *that* not the character page, so hit esc twice to be
safe. If we miss dismissing the notification, the 'extra' press
is safe, it doesn't quit the app.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Why did I do this? Not sure. I guess I figured it's too much
trouble to get it updated on every pungi-fedora branch? Anyway.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In install_repository_hd_variation , we have two disks attached,
so when we reach the INSTALLATION DESTINATION screen we expect
we have to select the correct target disk. However, as of the
most recent anaconda build in Rawhide, anaconda realizes we're
using a file from the other disk as our install repo, and
'protects' it - i.e. it does not show it on the INSTALLATION
DESTINATION screen, meaning only one disk is shown there, and
when only one disk is shown, it's pre-selected. So when we click,
we actually *un*select it, and the test fails.
Fixing this is a bit awkward; I wanted to add a new variable,
ANACONDA_PROTECTED_DISKS or something, and subtract that from
the NUMDISKS count; but we can't really do that as the enhanced
protection isn't in F38, and we can't easily set variables
differently on different releases (we'd have to set them in the
scheduler code, not just put them in the templates). So we just
code in a doofy condition for this instead. Maybe when F38 is
EOL we can change to the variable approach.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
