skopeo/containers-registries.conf.5.md
Jindrich Novy d0bf879d20 skopeo-1.2.2-2.el9
- use rhel-shortnames only from trusted registries
- sync with config files from current versions of vendored projects

Signed-off-by: Jindrich Novy <jnovy@redhat.com>
2021-03-03 09:57:04 +01:00

286 lines
12 KiB
Markdown

% CONTAINERS-REGISTRIES.CONF(5) System-wide registry configuration file
% Brent Baude
% Aug 2017
# NAME
containers-registries.conf - Syntax of System Registry Configuration File
# DESCRIPTION
The CONTAINERS-REGISTRIES configuration file is a system-wide configuration
file for container image registries. The file format is TOML.
Container engines will use the `$HOME/.config/containers/registries.conf` if it exists, otherwise they will use `/etc/containers/registries.conf`
### GLOBAL SETTINGS
`unqualified-search-registries`
: An array of _host_[`:`_port_] registries to try when pulling an unqualified image, in order.
### NAMESPACED `[[registry]]` SETTINGS
The bulk of the configuration is represented as an array of `[[registry]]`
TOML tables; the settings may therefore differ among different registries
as well as among different namespaces/repositories within a registry.
#### Choosing a `[[registry]]` TOML table
Given an image name, a single `[[registry]]` TOML table is chosen based on its `prefix` field.
`prefix`
: A prefix of the user-specified image name, i.e. using one of the following formats:
- _host_[`:`_port_]
- _host_[`:`_port_]`/`_namespace_[`/`_namespace_…]
- _host_[`:`_port_]`/`_namespace_[`/`_namespace_…]`/`_repo_
- _host_[`:`_port_]`/`_namespace_[`/`_namespace_…]`/`_repo_(`:`_tag|`@`_digest_)
The user-specified image name must start with the specified `prefix` (and continue
with the appropriate separator) for a particular `[[registry]]` TOML table to be
considered; (only) the TOML table with the longest match is used.
As a special case, the `prefix` field can be missing; if so, it defaults to the value
of the `location` field (described below).
#### Per-namespace settings
`insecure`
: `true` or `false`.
By default, container runtimes require TLS when retrieving images from a registry.
If `insecure` is set to `true`, unencrypted HTTP as well as TLS connections with untrusted
certificates are allowed.
`blocked`
: `true` or `false`.
If `true`, pulling images with matching names is forbidden.
#### Remapping and mirroring registries
The user-specified image reference is, primarily, a "logical" image name, always used for naming
the image. By default, the image reference also directly specifies the registry and repository
to use, but the following options can be used to redirect the underlying accesses
to different registry servers or locations (e.g. to support configurations with no access to the
internet without having to change `Dockerfile`s, or to add redundancy).
`location`
: Accepts the same format as the `prefix` field, and specifies the physical location
of the `prefix`-rooted namespace.
By default, this equal to `prefix` (in which case `prefix` can be omitted and the
`[[registry]]` TOML table can only specify `location`).
Example: Given
```
prefix = "example.com/foo"
location = "internal-registry-for-example.net/bar"
```
requests for the image `example.com/foo/myimage:latest` will actually work with the
`internal-registry-for-example.net/bar/myimage:latest` image.
`mirror`
: An array of TOML tables specifying (possibly-partial) mirrors for the
`prefix`-rooted namespace.
The mirrors are attempted in the specified order; the first one that can be
contacted and contains the image will be used (and if none of the mirrors contains the image,
the primary location specified by the `registry.location` field, or using the unmodified
user-specified reference, is tried last).
Each TOML table in the `mirror` array can contain the following fields, with the same semantics
as if specified in the `[[registry]]` TOML table directly:
- `location`
- `insecure`
`mirror-by-digest-only`
: `true` or `false`.
If `true`, mirrors will only be used during pulling if the image reference includes a digest.
Referencing an image by digest ensures that the same is always used
(whereas referencing an image by a tag may cause different registries to return
different images if the tag mapping is out of sync).
Note that if this is `true`, images referenced by a tag will only use the primary
registry, failing if that registry is not accessible.
*Note*: Redirection and mirrors are currently processed only when reading images, not when pushing
to a registry; that may change in the future.
#### Short-Name Aliasing
The use of unqualified-search registries entails an ambiguity as it is
unclear from which registry a given image, referenced by a short name,
may be pulled from.
As mentioned in the note at the end of this man page, using short names is
subject to the risk of hitting squatted registry namespaces. If the
unqualified-search registries are set to `["registry1.com", "registry2.com"]`
an attacker may take over a namespace of registry1.com such that an image may
be pulled from registry1.com instead of the intended source registry2.com.
While it is highly recommended to always use fully-qualified image references,
existing deployments using short names may not be easily changed. To
circumvent the aforementioned ambiguity, so called short-name aliases can be
configured that point to a fully-qualified image
reference.
Short-name aliases can be configured in the `[aliases]` table in the form of
`"name"="value"` with the left-hand `name` being the short name (e.g., "image")
and the right-hand `value` being the fully-qualified image reference (e.g.,
"registry.com/namespace/image"). Note that neither "name" nor "value" can
include a tag or digest. Moreover, "name" must be a short name and hence
cannot include a registry domain or refer to localhost.
When pulling a short name, the configured aliases table will be used for
resolving the short name. If a matching alias is found, it will be used
without further consulting the unqualified-search registries list. If no
matching alias is found, the behavior can be controlled via the
`short-name-mode` option as described below.
Note that tags and digests are stripped off a user-specified short name for
alias resolution. Hence, "image", "image:tag" and "image@digest" all resolve
to the same alias (i.e., "image"). Stripped off tags and digests are later
appended to the resolved alias.
Further note that drop-in configuration files (see containers-registries.conf.d(5))
can override aliases in the specific loading order of the files. If the "value" of
an alias is empty (i.e., ""), the alias will be erased. However, a given
"name" may only be specified once in a single config file.
#### Short-Name Aliasing: Modes
The `short-name-mode` option supports three modes to control the behaviour of
short-name resolution.
* `enforcing`: If only one unqualified-search registry is set, use it as there
is no ambiguity. If there is more than one registry and the user program is
running in a terminal (i.e., stdout & stdin are a TTY), prompt the user to
select one of the specified search registries. If the program is not running
in a terminal, the ambiguity cannot be resolved which will lead to an error.
* `permissive`: Behaves as enforcing but does not lead to an error if the
program is not running in a terminal. Instead, fallback to using all
unqualified-search registries.
* `disabled`: Use all unqualified-search registries without prompting.
If `short-name-mode` is not specified at all or left empty, default to the
`permissive` mode. If the user-specified short name was not aliased already,
the `enforcing` and `permissive` mode if prompted, will record a new alias
after a successful pull. Note that the recorded alias will be written to
`/var/cache/containers/short-name-aliases.conf` for root to have a clear
separation between possibly human-edited registries.conf files and the
machine-generated `short-name-aliases-conf`. Note that `$HOME/.cache` is used
for rootless users. If an alias is specified in a
`registries.conf` file and also the machine-generated
`short-name-aliases.conf`, the `short-name-aliases.conf` file has precedence.
#### Normalization of docker.io references
The Docker Hub `docker.io` is handled in a special way: every push and pull
operation gets internally normalized with `/library` if no other specific
namespace is defined (for example on `docker.io/namespace/image`).
(Note that the above-described normalization happens to match the behavior of
Docker.)
This means that a pull of `docker.io/alpine` will be internally translated to
`docker.io/library/alpine`. A pull of `docker.io/user/alpine` will not be
rewritten because this is already the correct remote path.
Therefore, to remap or mirror the `docker.io` images in the (implied) `/library`
namespace (or that whole namespace), the prefix and location fields in this
configuration file must explicitly include that `/library` namespace. For
example `prefix = "docker.io/library/alpine"` and not `prefix =
"docker.io/alpine"`. The latter would match the `docker.io/alpine/*`
repositories but not the `docker.io/[library/]alpine` image).
### EXAMPLE
```
unqualified-search-registries = ["example.com"]
[[registry]]
prefix = "example.com/foo"
insecure = false
blocked = false
location = "internal-registry-for-example.com/bar"
[[registry.mirror]]
location = "example-mirror-0.local/mirror-for-foo"
[[registry.mirror]]
location = "example-mirror-1.local/mirrors/foo"
insecure = true
```
Given the above, a pull of `example.com/foo/image:latest` will try:
1. `example-mirror-0.local/mirror-for-foo/image:latest`
2. `example-mirror-1.local/mirrors/foo/image:latest`
3. `internal-registry-for-example.net/bar/image:latest`
in order, and use the first one that exists.
## VERSION 1 FORMAT - DEPRECATED
VERSION 1 format is still supported but it does not support
using registry mirrors, longest-prefix matches, or location rewriting.
The TOML format is used to build a simple list of registries under three
categories: `registries.search`, `registries.insecure`, and `registries.block`.
You can list multiple registries using a comma separated list.
Search registries are used when the caller of a container runtime does not fully specify the
container image that they want to execute. These registries are prepended onto the front
of the specified container image until the named image is found at a registry.
Note that insecure registries can be used for any registry, not just the registries listed
under search.
The `registries.insecure` and `registries.block` lists have the same meaning as the
`insecure` and `blocked` fields in the current version.
### EXAMPLE
The following example configuration defines two searchable registries, one
insecure registry, and two blocked registries.
```
[registries.search]
registries = ['registry1.com', 'registry2.com']
[registries.insecure]
registries = ['registry3.com']
[registries.block]
registries = ['registry.untrusted.com', 'registry.unsafe.com']
```
# NOTE: RISK OF USING UNQUALIFIED IMAGE NAMES
We recommend always using fully qualified image names including the registry
server (full dns name), namespace, image name, and tag
(e.g., registry.redhat.io/ubi8/ubi:latest). When using short names, there is
always an inherent risk that the image being pulled could be spoofed. For
example, a user wants to pull an image named `foobar` from a registry and
expects it to come from myregistry.com. If myregistry.com is not first in the
search list, an attacker could place a different `foobar` image at a registry
earlier in the search list. The user would accidentally pull and run the
attacker's image and code rather than the intended content. We recommend only
adding registries which are completely trusted, i.e. registries which don't
allow unknown or anonymous users to create accounts with arbitrary names. This
will prevent an image from being spoofed, squatted or otherwise made insecure.
If it is necessary to use one of these registries, it should be added at the
end of the list.
It is recommended to use fully-qualified images for pulling as
the destination registry is unambiguous. Pulling by digest
(i.e., quay.io/repository/name@digest) further eliminates the ambiguity of
tags.
# SEE ALSO
containers-certs.d(5)
# HISTORY
Dec 2019, Warning added for unqualified image names by Tom Sweeney <tsweeney@redhat.com>
Mar 2019, Added additional configuration format by Sascha Grunert <sgrunert@suse.com>
Aug 2018, Renamed to containers-registries.conf(5) by Valentin Rothberg <vrothberg@suse.com>
Jun 2018, Updated by Tom Sweeney <tsweeney@redhat.com>
Aug 2017, Originally compiled by Brent Baude <bbaude@redhat.com>