.gitignore

@@ -1 +1 @@
-SOURCES/mysql-boost-8.0.36.tar.gz
+SOURCES/mysql-boost-8.0.30.tar.gz

.mysql.metadata

@@ -1 +1 @@
-fdbf5b1b37a5d882643695593ca25d0a75eb69ed SOURCES/mysql-boost-8.0.36.tar.gz
+49ff9bc9d2030de79f3e56088ddfe1fa38f87f4a SOURCES/mysql-boost-8.0.30.tar.gz

SOURCES/daemon-scl-helper.sh

@@ -1,43 +0,0 @@
-#!/bin/sh
-
-# This helper script is necessary for having proper SELinux context of daemon
-# process run in SCL environment via systemd unit file.
-# Without this script the process looses SELinux type because /usr/bin/scl
-# has context bin_t and unit_t -> bin_t results in unconfined process running.
-# If this helper script has the same SELinux context as the original binary,
-# the process will have proper SELinux context.
-#
-# This script was designed to be usable the same as the scl command is used,
-# including the collections given as more arguments, separated from binary
-# itself by -- separator.
-# So it is possible to use the list of collections to be enabled via
-# environment file.
-# Thus, instead of:
-#   /usr/bin/scl enable scl1 scl2 -- /path/to/bin arg1 arg2
-# you can use:
-#   /usr/bin/this-script enable scl1 scl2 -- /path/to/bin arg1 arg2
-#
-# Notice: do not forget to set proper SELinux context for this file.
-# The context should be the same as the binary running has.
-#
-# More information at http://bugzilla.redhat.com/show_bug.cgi?id=1172683
-
-action="$1"
-shift
-
-while [ -n "$1" ] && [ "$1" != "--" ] ; do
-  source scl_source "$action" "$1"
-  shift
-done
-
-if [ $# -le 2 ] ; then
-  echo "Usage `basename $0` enable sclname [sclname ...] -- /path/to/bin [arg ...]" >&2
-  exit 1
-fi
-
-shift
-
-exec "$@"
-
-
-

SOURCES/default-authentication-plugin.cnf

@@ -1,12 +0,0 @@
-#
-# MySQL 8.0.4 introduced 'caching_sha2_password' as its default authentication plugin.
-# It is faster and provides better security then the previous default authentication plugin.
-#
-# Until now (09/2018), it does not work with some other software (eg. MariaDB client, MariaDB connectors,  ...)
-#
-# This configuration file changes MySQL default server configuration, so it behaves the same way as in MySQL 5.7.
-#
-# To change the behaviour back to the upstream default, comment out the following lines:
-
-[mysqld]
-default_authentication_plugin=mysql_native_password

SOURCES/mysql-5.6.10-rpmlintrc

@@ -1,48 +0,0 @@
-# Filtered out until upstream fixes them
-# Upstream bug: http://bugs.mysql.com/68518
-addFilter("incorrect-fsf-address")
-
-# Done to avoid _prefix/lib64/tmpfiles.d
-addFilter("E: hardcoded-library-path in %\{_prefix\}/lib/tmpfiles.d")
-
-# Keeping the old summary for now
-addFilter("W: name-repeated-in-summary C MySQL")
-
-# Spellchecked
-addFilter("W: spelling-error %description -l en_US multi -> mulch, mufti")
-addFilter("W: spelling-error %description -l en_US benchmarking -> bench marking, bench-marking, benchmark")
-addFilter("W: spelling-error Summary(en_US) embeddable -> embedded")
-addFilter("W: spelling-error.*embeddable -> embedded")
-
-# As long as the manual is part of the original tarball, we have do to
-# this
-addFilter("mysql.src: W: invalid-url Source0: mysql-5.6.[0-9]+-nodocs.tar.gz")
-
-# Leave the logfile where it is for now
-addFilter("E: non-root-user-log-file /var/log/mysqld.log mysql")
-addFilter("E: non-root-group-log-file /var/log/mysqld.log mysql")
-addFilter("E: non-ghost-file /var/log/mysqld.log")
-addFilter("E: zero-length /var/log/mysqld.log")
-
-addFilter("E: incoherent-logrotate-file /etc/logrotate.d/mysqld")
-
-# Hidden files and zero lenght files is normal for some tests
-addFilter("W: hidden-file-or-dir /usr/share/mysql-test/std_data/.mylogin.cnf")
-addFilter("E: zero-length /usr/share/mysql-test/suite/parts/t/disabled.def")
-addFilter("E: zero-length /usr/share/mysql-test/std_data/bug37631.MYD")
-addFilter("E: zero-length /usr/share/mysql-test/std_data/cluster_7022_table.MYD")
-addFilter("E: zero-length /usr/share/mysql-test/collections/disabled-weekly.list")
-addFilter("E: zero-length /usr/share/mysql-test/collections/disabled-daily.list")
-
-# debuginfo bug?
-addFilter("E: non-standard-dir-perm /usr/src/debug/tmp 01777")
-
-# mysql-config *script* in lib
-addFilter("W: only-non-binary-in-usr-lib")
-
-# missing
-addFilter("W: no-manual-page-for-binary my_safe_process")
-
-# cluster is gone
-addFilter("W: obsolete-not-provided mysql-cluster")
-

SOURCES/mysql-arm32-timer.patch

@@ -1,10 +1,10 @@
 diff --git a/mysql-test/include/mtr_warnings.sql b/mysql-test/include/mtr_warnings.sql
-index 78b09285..b7153445 100644
+index eff14a67..413dfc27 100644
 --- a/mysql-test/include/mtr_warnings.sql
 +++ b/mysql-test/include/mtr_warnings.sql
-@@ -376,6 +376,11 @@ INSERT INTO global_suppressions VALUES
+@@ -363,6 +363,11 @@ INSERT INTO global_suppressions VALUES
- 
+  */
-  ("'mysql_native_password' is deprecated and will be removed in a future release."),
+  ("Manifest file '.*' is not read-only. For better security, please make sure that the file is read-only."),
  
 + /*
 +   ARM32 don't support timers and get this warning in every test.

SOURCES/mysql-c99.patch

@@ -1,12 +0,0 @@
-diff -ur mysql-8.0.35.orig/plugin/innodb_memcached/daemon_memcached/daemon/memcached.c mysql-8.0.35/plugin/innodb_memcached/daemon_memcached/daemon/memcached.c
---- mysql-8.0.35.orig/plugin/innodb_memcached/daemon_memcached/daemon/memcached.c	2023-10-12 13:45:01.000000000 +0200
-+++ mysql-8.0.35/plugin/innodb_memcached/daemon_memcached/daemon/memcached.c	2023-12-19 10:48:46.718006624 +0100
-@@ -4070,7 +4070,7 @@
-     do {
-         while(key_token->length != 0) {
-             /* whether there are more keys to fetch */
--            bool next_get = (key_token + 1)->value;
-+            bool next_get = (key_token + 1)->value != NULL;
- 
-             key = key_token->value;
-             nkey = key_token->length;

SOURCES/mysql-check-upgrade.sh

@@ -1,39 +0,0 @@
-#!/bin/sh
-
-source "`dirname ${BASH_SOURCE[0]}`/mysql-scripts-common"
-
-upgrade_info_file="$datadir/mysql_upgrade_info"
-version=0
-# get version as integer from mysql_upgrade_info file
-if [ -f "$upgrade_info_file" ] && [ -r "$upgrade_info_file" ] ; then
-    version_major=$(cat "$upgrade_info_file" | head -n 1 | sed -e 's/\([0-9]*\)\.\([0-9]*\)\..*$/\1/')
-    version_minor=$(cat "$upgrade_info_file" | head -n 1 | sed -e 's/\([0-9]*\)\.\([0-9]*\)\..*$/\2/')
-    if [[ $version_major =~ ^[0-9]+$ ]] && [[ $version_minor =~ ^[0-9]+$ ]] ; then
-        version=$((version_major*100+version_minor))
-    fi
-fi
-
-# compute current version as integer
-thisversion=$((@MAJOR_VERSION@*100+@MINOR_VERSION@))
-
-# provide warning in cases we should run mysql_upgrade
-if [ $version -ne $thisversion ] ; then
-
-    # give extra warning if some version seems to be skipped
-    if [ $version -gt 0 ] && [ $version -lt 505 ] ; then
-        echo "The datadir located at $datadir seems to be older than of a version 5.5. Please, mind that as a general rule, to upgrade from one release series to another, go to the next series rather than skipping a series." >&2
-    fi
-
-    cat <<EOF >&2
-The datadir located at $datadir needs to be upgraded using 'mysql_upgrade' tool. This can be done using the following steps:
-
-  1. Back-up your data before with 'mysql_upgrade'
-  2. Start the database daemon using 'service @DAEMON_NAME@ start'
-  3. Run 'mysql_upgrade' with a database user that has sufficient privileges
-
-Read more about 'mysql_upgrade' usage at:
-http://dev.mysql.com/doc/refman/5.6/en/mysql-upgrade.html
-EOF
-fi
-
-exit 0

SOURCES/mysql-logrotate-log-path.patch

@@ -1,11 +0,0 @@
---- mysql-8.0.11/support-files/mysql-log-rotate.in.old	2018-09-13 18:43:03.595891364 +0200
-+++ mysql-8.0.11/support-files/mysql-log-rotate.in	2018-09-13 18:43:36.774236649 +0200
-@@ -41,7 +41,7 @@
- # ATTENTION: The /root/.my.cnf file should be readable
- # _ONLY_ by root !
- 
--@localstatedir@/mysqld.log {
-+@LOG_LOCATION@ {
-         # create 600 mysql mysql
-         notifempty
-         daily

SOURCES/mysql-mtr.patch

@@ -1,7 +1,7 @@
 Avoid errors like:
 
 |  Path length (109) is longer than maximum supported length (108) and will be truncated at /usr/lib64/perl5/vendor_perl/Socket.pm line 880, <GEN16094> line 1.
-|  worker[2] mysql-test-run: *** ERROR: Socket path '/builddir/build/BUILDROOT/community-mysql-8.0.24-1.fc35.s390x/usr/share/mysql-test/var/tmp/2' too long,
+|  worker[2] mysql-test-run: *** ERROR: Socket path '/builddir/build/BUILDROOT/mysql-8.0.24-1.fc35.s390x/usr/share/mysql-test/var/tmp/2' too long,
 |  it would be  truncated and thus not possible to use for connection to  MySQL Server. Set a shorter with --tmpdir=<path> option
 
 ===
@@ -26,7 +26,7 @@ The question is why haven't I encountered this issue until recently ?
 After the recent tweaks to the testsuite (between 8.0.24 and 8.0.25 release), the generated --tmpdir path changed from
 |  --tmpdir=/builddir/build/BUILD/mysql-8.0.24/x86_64-redhat-linux-gnu/mysql-test/var/tmp/
 to
-|  --tmpdir=/builddir/build/BUILDROOT/community-mysql-8.0.24-1.fc35.x86_64/usr/share/mysql-test/var/tmp/
+|  --tmpdir=/builddir/build/BUILDROOT/mysql-8.0.24-1.fc35.x86_64/usr/share/mysql-test/var/tmp/
 
 ===
 
@@ -39,7 +39,7 @@ BEFORE:
 AFTER:
 
 |  Installing system database
-|  ### safe_path: /builddir/build/BUILDROOT/community-mysql-8.0.24-1.fc35.x86_64/usr/bin//mysqltest_safe_process --verbose -- /builddir/build/BUILDROOT/community-mysql-8.0.24-1.fc35.x86_64/usr/libexec/mysqld --no-defaults --initialize-insecure --loose-skip-ndbcluster --tmpdir=/builddir/build/BUILDROOT/community-mysql-8.0.24-1.fc35.x86_64/usr/share/mysql-test/var/tmp/ --core-file --datadir=/builddir/build/BUILDROOT/community-mysql-8.0.24-1.fc35.x86_64/usr/share/mysql-test/var/data/ --secure-file-priv=/builddir/build/BUILDROOT/community-mysql-8.0.24-1.fc35.x86_64/usr/share/mysql-test/var --innodb_buffer_pool_size=24M --innodb-log-file-size=5M --innodb_autoextend_increment=8 --character-sets-dir=/builddir/build/BUILDROOT/community-mysql-8.0.24-1.fc35.x86_64/usr/share/community-mysql/charsets --loose-auto_generate_certs=OFF --loose-sha256_password_auto_generate_rsa_keys=OFF --loose-caching_sha2_password_auto_generate_rsa_keys=OFF --init-file=/builddir/build/BUILDROOT/community-mysql-8.0.24-1.fc35.x86_64/usr/share/mysql-test/var/tmp/bootstrap.sql
+|  ### safe_path: /builddir/build/BUILDROOT/mysql-8.0.24-1.fc35.x86_64/usr/bin//mysqltest_safe_process --verbose -- /builddir/build/BUILDROOT/mysql-8.0.24-1.fc35.x86_64/usr/libexec/mysqld --no-defaults --initialize-insecure --loose-skip-ndbcluster --tmpdir=/builddir/build/BUILDROOT/mysql-8.0.24-1.fc35.x86_64/usr/share/mysql-test/var/tmp/ --core-file --datadir=/builddir/build/BUILDROOT/mysql-8.0.24-1.fc35.x86_64/usr/share/mysql-test/var/data/ --secure-file-priv=/builddir/build/BUILDROOT/mysql-8.0.24-1.fc35.x86_64/usr/share/mysql-test/var --innodb_buffer_pool_size=24M --innodb-log-file-size=5M --innodb_autoextend_increment=8 --character-sets-dir=/builddir/build/BUILDROOT/mysql-8.0.24-1.fc35.x86_64/usr/share/mysql/charsets --loose-auto_generate_certs=OFF --loose-sha256_password_auto_generate_rsa_keys=OFF --loose-caching_sha2_password_auto_generate_rsa_keys=OFF --init-file=/builddir/build/BUILDROOT/mysql-8.0.24-1.fc35.x86_64/usr/share/mysql-test/var/tmp/bootstrap.sql
 
 ===
 
@@ -59,32 +59,30 @@ Even though the script warns about the path length, tries to workaround it; it d
 
 I'm not sure whether the output is synchronous, but even if it wasn'tit still looks weird.
 
-| + cd /builddir/build/BUILDROOT/community-mysql-8.0.24-1.fc35.x86_64/usr/share/mysql-test
+| + cd /builddir/build/BUILDROOT/mysql-8.0.24-1.fc35.x86_64/usr/share/mysql-test
 | Logging: ./mysql-test-run.pl  --verbose --parallel=auto --force --retry=2 --suite-timeout=900 --testcase-timeout=30 --mysqld=--binlog-format=mixed --max-test-fail=5 --report-unstable-tests --clean-vardir --suite=main --mem --skip-test-list=platform-specific-tests.list
 | Path length (109) is longer than maximum supported length (108) and will be truncated at /usr/lib64/perl5/vendor_perl/Socket.pm line 880.
-| Too long tmpdir path '/builddir/build/BUILDROOT/community-mysql-8.0.24-1.fc35.x86_64/usr/share/mysql-test/var/tmp'  creating a shorter one
+| Too long tmpdir path '/builddir/build/BUILDROOT/mysql-8.0.24-1.fc35.x86_64/usr/share/mysql-test/var/tmp'  creating a shorter one
 |  - Using tmpdir: '/tmp/XfTFAis2Jl'
 | > Collecting: main
-| > testdir: /builddir/build/BUILDROOT/community-mysql-8.0.24-1.fc35.x86_64/usr/share/mysql-test/t
+| > testdir: /builddir/build/BUILDROOT/mysql-8.0.24-1.fc35.x86_64/usr/share/mysql-test/t
-| > resdir: /builddir/build/BUILDROOT/community-mysql-8.0.24-1.fc35.x86_64/usr/share/mysql-test/r
+| > resdir: /builddir/build/BUILDROOT/mysql-8.0.24-1.fc35.x86_64/usr/share/mysql-test/r
 | > Collecting: i_main
 | Removing old var directory
-| > opt_vardir: /builddir/build/BUILDROOT/community-mysql-8.0.24-1.fc35.x86_64/usr/share/mysql-test/var
+| > opt_vardir: /builddir/build/BUILDROOT/mysql-8.0.24-1.fc35.x86_64/usr/share/mysql-test/var
-| > Removing /builddir/build/BUILDROOT/community-mysql-8.0.24-1.fc35.x86_64/usr/share/mysql-test/var/
+| > Removing /builddir/build/BUILDROOT/mysql-8.0.24-1.fc35.x86_64/usr/share/mysql-test/var/
 | > Removing /dev/shm/var_933_jfTb
 | > Removing /tmp/XfTFAis2Jl/
-| Creating var directory '/builddir/build/BUILDROOT/community-mysql-8.0.24-1.fc35.x86_64/usr/share/mysql-test/var'
+| Creating var directory '/builddir/build/BUILDROOT/mysql-8.0.24-1.fc35.x86_64/usr/share/mysql-test/var'
 | > Creating /dev/shm/var_933_jfTb
 |  - symlinking 'var' to '/dev/shm/var_933_jfTb'
 
 
 
 
-diff --git a/mysql-test/mysql-test-run.pl b/mysql-test/mysql-test-run.pl
+--- mysql-8.0.24/mysql-test/mysql-test-run.pl	2021-05-10 04:29:44.391897891 +0200
-index 26e6c92c..9d85c6d6 100755
++++ mysql-8.0.24/mysql-test/mysql-test-run.pl_patched	2021-05-10 04:38:51.031702753 +0200
---- a/mysql-test/mysql-test-run.pl
+@@ -3374,17 +3374,6 @@ sub setup_vardir() {
-+++ b/mysql-test/mysql-test-run.pl
-@@ -3533,17 +3533,6 @@ sub setup_vardir() {
    mkpath("$opt_vardir/tmp");
    mkpath($opt_tmpdir) if ($opt_tmpdir ne "$opt_vardir/tmp");
  
@@ -101,4 +99,4 @@ index 26e6c92c..9d85c6d6 100755
 -
    # Copy all files from std_data into var/std_data
    # and make them world readable
-   copytree("$glob_mysql_test_dir/std_data", "$opt_vardir/std_data", "0022")
+   copytree("$glob_mysql_test_dir/std_data", "$opt_vardir/std_data", "0022");

SOURCES/mysql-scl-env-check.patch

@@ -1,144 +0,0 @@
-diff -up mysql-8.0.11/scripts/mysqld_safe.sh.p90 mysql-8.0.11/scripts/mysqld_safe.sh
---- mysql-8.0.11/scripts/mysqld_safe.sh.p90	2018-04-08 08:44:49.000000000 +0200
-+++ mysql-8.0.11/scripts/mysqld_safe.sh	2018-06-23 21:28:20.533825845 +0200
-@@ -11,6 +11,12 @@
- # mysql.server works by first doing a cd to the base directory and from there
- # executing mysqld_safe
- 
-+# we want start daemon only inside "scl enable" invocation
-+if ! scl_enabled @SCL_NAME@ ; then
-+    echo "Use \"scl enable @SCL_NAME@ 'service ...'\" invocation"
-+    exit 1
-+fi
-+
- # Initialize script globals
- KILL_MYSQLD=1;
- MYSQLD=
-diff -up mysql-8.0.11/scripts/mysql.init.in.p90 mysql-8.0.11/scripts/mysql.init.in
---- mysql-8.0.11/scripts/mysql.init.in.p90	2018-06-23 21:28:20.531825833 +0200
-+++ mysql-8.0.11/scripts/mysql.init.in	2018-06-23 21:28:20.533825845 +0200
-@@ -71,8 +71,8 @@ start(){
- 	action $"Starting $prog: " /bin/true
- 	ret=0
-     else
--        @libexecdir@/mysql-check-socket || return 1
--        su - $MYUSER -s /bin/bash -c "@libexecdir@/mysql-prepare-db-dir $MYUSER $MYGROUP" || return 4
-+        scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysql-check-socket || return 1
-+        su - $MYUSER -s /bin/bash -c "scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysql-prepare-db-dir $MYUSER $MYGROUP" || return 4
- 
- 	# Pass all the options determined above, to ensure consistent behavior.
- 	# In many cases mysqld_safe would arrive at the same conclusions anyway
-@@ -81,13 +81,13 @@ start(){
- 	# and some users might prefer to configure logging to syslog.)
- 	# Note: set --basedir to prevent probes that might trigger SELinux
- 	# alarms, per bug #547485
--	su - $MYUSER -s /bin/bash -c "$exec   --datadir='$datadir' --socket='$socketfile' \
-+	su - $MYUSER -s /bin/bash -c "scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- $exec   --datadir='$datadir' --socket='$socketfile' \
- 		--pid-file='$pidfile' \
- 		--basedir=@prefix@ --user=$MYUSER" >/dev/null 2>&1 &
- 	safe_pid=$!
- 
- 	# Wait until the daemon is up
--	su - $MYUSER -s /bin/bash -c "@libexecdir@/mysql-wait-ready '$safe_pid'"
-+	su - $MYUSER -s /bin/bash -c "scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysql-wait-ready '$safe_pid'"
- 	ret=$?
- 
- 	if [ $ret -eq 0 ]; then
-@@ -154,6 +154,18 @@ condrestart(){
-     [ -e $lockfile ] && restart || :
- }
- 
-+# We have to re-enable SCL environment, because /sbin/service
-+# clears almost all environment variables.
-+# Since X_SCLS is cleared as well, we lose information about other
-+# collections enabled.
-+source @SCL_SCRIPTS@/service-environment
-+source scl_source enable $@SCL_NAME_UPPER@_SCLS_ENABLED
-+
-+# we want start daemon only inside "scl enable" invocation
-+if ! scl_enabled @SCL_NAME@ ; then
-+    echo "Collection @SCL_NAME@ has to be listed in @SCL_SCRIPTS@/service-environment"
-+    exit 1
-+fi
- 
- # See how we were called.
- case "$1" in
-diff -up mysql-8.0.11/scripts/mysql.service.in.p90 mysql-8.0.11/scripts/mysql.service.in
---- mysql-8.0.11/scripts/mysql.service.in.p90	2018-06-23 21:28:20.531825833 +0200
-+++ mysql-8.0.11/scripts/mysql.service.in	2018-06-23 21:34:19.940881913 +0200
-@@ -32,16 +32,23 @@ After=network.target
- 
- [Service]
- Type=notify
-+NotifyAccess=all
- User=mysql
- Group=mysql
- 
--ExecStartPre=@libexecdir@/mysql-check-socket
--ExecStartPre=@libexecdir@/mysql-prepare-db-dir %n
-+# Load collections set to enabled for this service
-+EnvironmentFile=@SCL_SCRIPTS@/service-environment
-+
-+# We want to start server only inside "scl enable" invocation
-+ExecStartPre=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- /usr/bin/scl_enabled @SCL_NAME@
-+
-+ExecStartPre=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysql-check-socket
-+ExecStartPre=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysql-prepare-db-dir %n
- # Note: we set --basedir to prevent probes that might trigger SELinux alarms,
- # per bug #547485
--ExecStart=@libexecdir@/mysqld --basedir=@prefix@
--ExecStartPost=@libexecdir@/mysql-check-upgrade
--ExecStopPost=@libexecdir@/mysql-wait-stop
-+ExecStart=@libexecdir@/mysqld-scl-helper enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysqld --basedir=@prefix@
-+ExecStartPost=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysql-check-upgrade
-+ExecStopPost=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysql-wait-stop
- 
- # Give a reasonable amount of time for the server to start up/shut down
- TimeoutSec=300
-diff -up mysql-8.0.11/scripts/mysql@.service.in.p90 mysql-8.0.11/scripts/mysql@.service.in
---- mysql-8.0.11/scripts/mysql@.service.in.p90	2018-06-23 21:28:20.531825833 +0200
-+++ mysql-8.0.11/scripts/mysql@.service.in	2018-06-23 21:34:30.583942800 +0200
-@@ -32,16 +32,23 @@ After=network.target
- 
- [Service]
- Type=notify
-+NotifyAccess=all
- User=mysql
- Group=mysql
- 
--ExecStartPre=@libexecdir@/mysql-check-socket --defaults-group-suffix=.%I
--ExecStartPre=@libexecdir@/mysql-prepare-db-dir --defaults-group-suffix=.%I %n
-+# Load collections set to enabled for this service
-+EnvironmentFile=@SCL_SCRIPTS@/service-environment
-+
-+# We want to start server only inside "scl enable" invocation
-+ExecStartPre=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- /usr/bin/scl_enabled @SCL_NAME@
-+
-+ExecStartPre=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysql-check-socket --defaults-group-suffix=.%I
-+ExecStartPre=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysql-prepare-db-dir --defaults-group-suffix=.%I %n
- # Note: we set --basedir to prevent probes that might trigger SELinux alarms,
- # per bug #547485
--ExecStart=@libexecdir@/mysqld --defaults-group-suffix=.%I --basedir=@prefix@
--ExecStartPost=@libexecdir@/mysql-check-upgrade --defaults-group-suffix=.%I
--ExecStopPost=@libexecdir@/mysql-wait-stop --defaults-group-suffix=.%I
-+ExecStart=@libexecdir@/mysqld-scl-helper enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysqld --defaults-group-suffix=.%I --basedir=@prefix@
-+ExecStartPost=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysql-check-upgrade --defaults-group-suffix=.%I
-+ExecStopPost=/usr/bin/scl enable $@SCL_NAME_UPPER@_SCLS_ENABLED -- @libexecdir@/mysql-wait-stop --defaults-group-suffix=.%I
- 
- # Give a reasonable amount of time for the server to start up/shut down
- TimeoutSec=300
-diff -up mysql-8.0.11/support-files/mysql-log-rotate.sh.p90 mysql-8.0.11/support-files/mysql-log-rotate.sh
---- mysql-8.0.11/support-files/mysql-log-rotate.sh.p90	2018-04-08 08:44:49.000000000 +0200
-+++ mysql-8.0.11/support-files/mysql-log-rotate.sh	2018-06-23 21:28:20.533825845 +0200
-@@ -51,9 +51,9 @@
-     postrotate
- 	# just if mysqld is really running
- 	if test -x @bindir@/mysqladmin && \
--	   @bindir@/mysqladmin ping &>/dev/null
-+	   /usr/bin/scl enable @SCL_NAME@ -- @bindir@/mysqladmin ping &>/dev/null
- 	then
--	   @bindir@/mysqladmin flush-logs
-+	   /usr/bin/scl enable @SCL_NAME@ -- @bindir@/mysqladmin flush-logs
- 	fi
-     endscript
- }

SOURCES/mysql-scripts.patch

@@ -1,6 +1,6 @@
---- mysql-8.0.22/scripts/CMakeLists.txt.old	2020-10-26 10:23:30.666696561 +0100
+--- mysql-8.0.22/scripts/CMakeLists.txt.old	2020-10-21 11:08:50.654252563 +0200
-+++ mysql-8.0.22/scripts/CMakeLists.txt	2020-10-26 10:25:14.447914251 +0100
++++ mysql-8.0.22/scripts/CMakeLists.txt	2020-10-21 11:11:33.635935366 +0200
-@@ -507,4 +507,33 @@
+@@ -507,4 +507,30 @@
        )
      ENDIF()
    ENDIF()
@@ -11,13 +11,10 @@
 +    mysql.service
 +    mysql@.service
 +    mysql-prepare-db-dir
-+    mysql-wait-ready
 +    mysql-wait-stop
 +    mysql-check-socket
-+    mysql-check-upgrade
 +    mysql-scripts-common
 +    mysql_config_multilib
-+    mysql.init
 +    my.cnf
 +    server.cnf
 +  )

SOURCES/mysql-sysnice.te

@@ -1,10 +0,0 @@
-
-module mysql-sysnice 1.0;
-
-require {
-	type mysqld_t;
-	class capability sys_nice;
-}
-
-#============= mysqld_t ==============
-allow mysqld_t self:capability sys_nice;

SOURCES/mysql-wait-ready.sh

@@ -1,45 +0,0 @@
-#!/bin/sh
-
-source "`dirname ${BASH_SOURCE[0]}`/mysql-scripts-common"
-
-# This script waits for mysqld to be ready to accept connections
-# (which can be many seconds or even minutes after launch, if there's
-# a lot of crash-recovery work to do).
-# Running this as ExecStartPost is useful so that services declared as
-# "After mysqld" won't be started until the database is really ready.
-
-if [ $# -ne 1 ] ; then
-	echo "You need to pass daemon pid as an argument for this script."
-	exit 20
-fi
-
-# Service file passes us the daemon's PID (actually, mysqld_safe's PID)
-daemon_pid="$1"
-
-# Wait for the server to come up or for the mysqld process to disappear
-ret=0
-while /bin/true; do
-	# Check process still exists
-	if ! [ -d "/proc/${daemon_pid}" ] ; then
-	    ret=1
-	    break
-	fi
-	RESPONSE=`@bindir@/mysqladmin --no-defaults --socket="$socketfile" --user=UNKNOWN_MYSQL_USER ping 2>&1`
-	mret=$?
-	if [ $mret -eq 0 ] ; then
-	    break
-	fi
-	# exit codes 1, 11 (EXIT_CANNOT_CONNECT_TO_SERVICE) are expected,
-	# anything else suggests a configuration error
-	if [ $mret -ne 1 -a $mret -ne 11 ]; then
-            echo "Cannot check for @NICE_PROJECT_NAME@ Daemon startup because of mysqladmin failure." >&2
-	    ret=$mret
-	    break
-	fi
-	# "Access denied" also means the server is alive
-	echo "$RESPONSE" | grep -q "Access denied for user" && break
-
-	sleep 1
-done
-
-exit $ret

SOURCES/mysql.init.in

@@ -1,186 +0,0 @@
-#!/bin/sh
-#
-# @DAEMON_NAME@	This shell script takes care of starting and stopping
-#		the MySQL subsystem (mysqld).
-#
-# chkconfig: - 64 36
-# description:	MySQL database server.
-# processname: mysqld
-# config: @sysconfdir@/my.cnf
-# pidfile: /var/run/@DAEMON_NAME@/@DAEMON_NO_PREFIX@.pid
-### BEGIN INIT INFO
-# Provides: mysqld
-# Required-Start: $local_fs $remote_fs $network $named $syslog $time
-# Required-Stop: $local_fs $remote_fs $network $named $syslog $time
-# Short-Description: start and stop MySQL server
-# Description: MySQL database server
-### END INIT INFO
-
-# Source function library.
-. /etc/rc.d/init.d/functions
-
-# Source networking configuration.
-. /etc/sysconfig/network
-
-
-exec="@bindir@/mysqld_safe"
-prog="@DAEMON_NAME@"
-
-# Set timeouts here so they can be overridden from @sysconfdir@/sysconfig/@DAEMON_NO_PREFIX@
-STARTTIMEOUT=300
-STOPTIMEOUT=60
-
-# User and group the daemon will run under
-MYUSER=mysql
-MYGROUP=mysql
-
-# Edit the following file in order to re-write some of the environment
-# variables defined above, like $STARTTIMEOUT, $STOPTIMEOUT, $exec
-[ -e @sysconfdir@/sysconfig/@DAEMON_NO_PREFIX@ ] && . @sysconfdir@/sysconfig/@DAEMON_NO_PREFIX@
-
-lockfile=/var/lock/subsys/$prog
-
-# get options from my.cnf
-source "@libexecdir@/mysql-scripts-common"
-
-start(){
-    [ -x $exec ] || exit 5
-
-    # check permissions
-    if ! touch $(dirname $socketfile) &>/dev/null ; then
-        action $"Starting $prog: " /bin/false
-        return 4
-    fi
-
-    # check to see if it's already running
-    MYSQLDRUNNING=0
-    if [ -f "$pidfile" ]; then
-	MYSQLPID=`cat "$pidfile" 2>/dev/null`
-	if [ -n "$MYSQLPID" ] && [ -d "/proc/$MYSQLPID" ] ; then
-	    MYSQLDRUNNING=1
-	fi
-    fi
-    RESPONSE=`@bindir@/mysqladmin --no-defaults --socket="$socketfile" --user=UNKNOWN_MYSQL_USER ping 2>&1`
-    if [ $MYSQLDRUNNING = 1 ] && [ $? = 0 ]; then
-	# already running, do nothing
-	action $"Starting $prog: " /bin/true
-	ret=0
-    elif [ $MYSQLDRUNNING = 1 ] && echo "$RESPONSE" | grep -q "Access denied for user"
-    then
-	# already running, do nothing
-	action $"Starting $prog: " /bin/true
-	ret=0
-    else
-        @libexecdir@/mysql-check-socket || return 1
-        su - $MYUSER -s /bin/bash -c "@libexecdir@/mysql-prepare-db-dir $MYUSER $MYGROUP" || return 4
-
-	# Pass all the options determined above, to ensure consistent behavior.
-	# In many cases mysqld_safe would arrive at the same conclusions anyway
-	# but we need to be sure.  (An exception is that we don't force the
-	# log-error setting, since this script doesn't really depend on that,
-	# and some users might prefer to configure logging to syslog.)
-	# Note: set --basedir to prevent probes that might trigger SELinux
-	# alarms, per bug #547485
-	su - $MYUSER -s /bin/bash -c "$exec   --datadir='$datadir' --socket='$socketfile' \
-		--pid-file='$pidfile' \
-		--basedir=@prefix@ --user=$MYUSER" >/dev/null 2>&1 &
-	safe_pid=$!
-
-	# Wait until the daemon is up
-	su - $MYUSER -s /bin/bash -c "@libexecdir@/mysql-wait-ready '$safe_pid'"
-	ret=$?
-
-	if [ $ret -eq 0 ]; then
-	    action $"Starting $prog: " /bin/true
-	    chmod o+r $pidfile >/dev/null 2>&1
-	    touch $lockfile
-	else
-	    action $"Starting $prog: " /bin/false
-	fi
-    fi
-    return $ret
-}
-
-stop(){
-	if [ ! -f "$pidfile" ]; then
-	    # not running; per LSB standards this is "ok"
-	    action $"Stopping $prog: " /bin/true
-	    return 0
-	fi
-	MYSQLPID=`cat "$pidfile" 2>/dev/null`
-	if [ -n "$MYSQLPID" ]; then
-	    if ! [ -d "/proc/$MYSQLPID" ] ; then
-		# process doesn't run anymore
-		action $"Stopping $prog: " /bin/true
-		return 0
-	    fi
-	    /bin/kill "$MYSQLPID" >/dev/null 2>&1
-	    ret=$?
-	    if [ $ret -eq 0 ]; then
-		TIMEOUT="$STOPTIMEOUT"
-		while [ $TIMEOUT -gt 0 ]; do
-		    /bin/kill -0 "$MYSQLPID" >/dev/null 2>&1 || break
-		    sleep 1
-		    let TIMEOUT=${TIMEOUT}-1
-		done
-		if [ $TIMEOUT -eq 0 ]; then
-		    echo "Timeout error occurred trying to stop MySQL Daemon."
-		    ret=1
-		    action $"Stopping $prog: " /bin/false
-		else
-		    rm -f $lockfile
-		    rm -f "$socketfile"
-		    action $"Stopping $prog: " /bin/true
-		fi
-	    else
-		# kill command failed, probably insufficient permissions
-		action $"Stopping $prog: " /bin/false
-		ret=4
-	    fi
-	else
-	    # failed to read pidfile, probably insufficient permissions
-	    action $"Stopping $prog: " /bin/false
-	    ret=4
-	fi
-	return $ret
-}
- 
-restart(){
-    stop
-    start
-}
-
-condrestart(){
-    [ -e $lockfile ] && restart || :
-}
-
-
-# See how we were called.
-case "$1" in
-  start)
-    start
-    ;;
-  stop)
-    stop
-    ;;
-  status)
-    status -p "$pidfile" $prog
-    ;;
-  restart)
-    restart
-    ;;
-  condrestart|try-restart)
-    condrestart
-    ;;
-  reload)
-    exit 3
-    ;;
-  force-reload)
-    restart
-    ;;
-  *)
-    echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload}"
-    exit 2
-esac
-
-exit $?

SOURCES/mysql.rpmlintrc

@@ -0,0 +1,37 @@
+# THIS FILE SERVES FOR WHITELISTING RPMLINT ERRORS AND WARNINGS IN TASKOTRON
+# https://fedoraproject.org/wiki/Taskotron/Tasks/dist.rpmlint#Whitelisting_errors
+
+# (same file in python3 package served as a great example)
+
+
+
+# Spelling errors
+addFilter(r'spelling-error .* en_US (cnf|mysqld|subpackage) ')
+
+# Debug symlinks
+addFilter(r'dangling-relative-symlink /usr/lib/.build-id')
+
+# Testsuite
+#   Some expected tests results are zero-length files
+addFilter(r'(zero-length|pem-certificate|hidden-file-or-dir) /usr/share/mysql-test/*')
+
+# Chroot function
+#   False positive; checked by upstream
+addFilter(r'missing-call-to-chdir-with-chroot')
+
+# Missing documentation
+#   I don't think that's on the upstream priority list
+addFilter(r'no-documentation')
+addFilter(r'no-manual-page-for-binary')
+
+# Cluster is gone
+addFilter("W: obsolete-not-provided mysql-cluster")
+addFilter("W: obsolete-not-provided mysql-bench")
+addFilter("W: obsolete-not-provided community-mysql-bench")
+
+# Config file without noreplace flag
+#   Don't replace logs that may contain old entries
+addFilter(r'conffile-without-noreplace-flag /var/log/mariadb/mariadb.log')
+
+# Seems pretty standard to me ...
+addFilter(r'non-standard-dir-perm /var/log/mysql 750')

SOURCES/mysql.service.in

@@ -40,7 +40,6 @@ ExecStartPre=@libexecdir@/mysql-prepare-db-dir %n
 # Note: we set --basedir to prevent probes that might trigger SELinux alarms,
 # per bug #547485
 ExecStart=@libexecdir@/mysqld --basedir=@prefix@
-ExecStartPost=@libexecdir@/mysql-check-upgrade
 ExecStopPost=@libexecdir@/mysql-wait-stop
 
 # Give a reasonable amount of time for the server to start up/shut down

SOURCES/mysql@.service.in

@@ -40,7 +40,6 @@ ExecStartPre=@libexecdir@/mysql-prepare-db-dir --defaults-group-suffix=.%I %n
 # Note: we set --basedir to prevent probes that might trigger SELinux alarms,
 # per bug #547485
 ExecStart=@libexecdir@/mysqld --defaults-group-suffix=.%I --basedir=@prefix@
-ExecStartPost=@libexecdir@/mysql-check-upgrade --defaults-group-suffix=.%I
 ExecStopPost=@libexecdir@/mysql-wait-stop --defaults-group-suffix=.%I
 
 # Give a reasonable amount of time for the server to start up/shut down

SOURCES/rh-skipped-tests-list-arm.list

@@ -1,9 +1,32 @@
+gis.st_latitude                            : BUG#0 fails on F32+
+gis.st_longitude                           : BUG#0 fails on F32+
+
+perfschema.func_file_io                    : BUG#0 missing hw on 32-bit arm
+perfschema.global_read_lock                : BUG#0 missing hw on 32-bit arm
+perfschema.relaylog                        : BUG#0 missing hw on 32-bit arm
+perfschema.setup_objects                   : BUG#0 missing hw on 32-bit arm
+
+clone.remote_error_basic                   : BUG#0 fails since 8.0.19 on F32+, max_allowed_packet is 0
+
+clone.remote_dml_auto_tune                 : BUG#0
+
+# Unstable
+clone.local_dml_auto_tune                  : BUG#0
+innodb.innodb_bug-13628249                 : BUG#0
+main.grant_dynamic_flush                   : BUG#0
+innodb.innodb_read_only                    : BUG#0
+
+rpl_nogtid.rpl_mixed_mixing_engines        : BUG#0 timeout after 1800 secs or armv7hl
+
 # Failing on C9S & RHEL 9 for MySQL release 8.0.27
 sys_vars.innodb_buffer_pool_size_basic     : BUG#0
 
 # Unstable on aarch64 since MySQL 8.0.28
 innodb_undo.undo_settings                     : BUG#0
-
+perfschema.idx_session_account_connect_attrs  : BUG#0
-# Unstable on aarch64 since MySQL 8.0.36
+perfschema.idx_session_connect_attrs          : BUG#0
-sys_vars.myisam_data_pointer_size_func     : BUG#0
+rpl_gtid.rpl_mixed_temp_table_stored_function : BUG#0
-rpl.rpl_eventlog_psi_memory                : BUG#0
+sysschema.pr_ps_setup_show_enabled            : BUG#0
+perfschema.idx_threads                        : BUG#0
+sys_vars.myisam_data_pointer_size_func        : BUG#0
+federated.federated_server                    : BUG#0

SOURCES/rh-skipped-tests-list-base.list

@@ -1,23 +1,20 @@
-auth_sec.tls12_tls1 : BUG#0
+# Fails on all arches
-auth_sec.tls13_tls1 : BUG#0
+main.subquery_sj_mat_bka_nobnl             : BUG#0 failing since 8.0.24 on F32+
-x.connection_tls_version : BUG#0
+main.derived_limit                         : BUG#0 failing since 8.0.24 on F32+
+main.explain_tree                          : BUG#0 failing since 8.0.24 on F32+
 
-# x86_64
+auth_sec.keyring_file_data_qa              : BUG#0 failing on F32+
-auth_sec.keyring_file_data_qa : BUG#0
+innodb.alter_kill                          : BUG#0 failing on F34+
-main.mysql_load_data_local_dir : BUG#0
+main.mtr_unit_tests                        : BUG#0 failing on F35+
-# i686
-main.ctype_unicode900_as_cs : BUG#0
-collations.chinese : BUG#0
-main.mysql_load_data_local_dir : BUG#0
 
-# x86_64, s390x
+# Fails when -DENABLED_LOCAL_INFILE=ON
-main.mysqld--defaults-file : BUG#0
+main.mysql_load_data_local_dir             : BUG#0 failing on F32+
-main.mysqltest_json : BUG#0
-main.mtr_unit_tests : BUG#0
-main.mysqld--help-notwin : BUG#0
 
-# Unstable since 8.0.27
+# Unstable
-innodb.innodb_read_only-2 : BUG#0
+innodb.innodb_force_recovery               : BUG#0 unstable since 8.0.24 on F32+
+clone.local_dml_auto_tune                  : BUG#0 unstable on x86_64 and i686
+perfschema.threads_mysql                   : BUG#0 unstable on x86_64 and i686
+rpl_gtid.rpl_multi_source_mtr_includes     : BUG#0 unstable on x86_64 and i686
 
 # Failing on 32-bit arches: armv7hl i686 s390x; since MySQL 8.0.25
 x.connection_unixsocket                    : BUG#0
@@ -25,22 +22,38 @@ x.connection_unixsocket_invalid            : BUG#0
 x.connection_unixsocket_lock               : BUG#0
 innodb.innodb_bug-13628249                 : BUG#0
 
+# Failing on C9S & RHEL 9 for MySQL release 8.0.27
+auth_sec.admin_channel_tls                 : BUG#0
+auth_sec.cipher_support                    : BUG#0
+auth_sec.openssl_cert_generation           : BUG#0
+auth_sec.openssl_without_fips              : BUG#0
+auth_sec.ssl_mode                          : BUG#0
+auth_sec.tls                               : BUG#0
+auth_sec.tls12_tls1                        : BUG#0
+binlog.binlog_grant_alter_user             : BUG#0
+main.grant_alter_user_qa                   : BUG#0
+main.grant_user_lock_qa                    : BUG#0
+main.openssl_1                             : BUG#0
+main.ssl_cipher                            : BUG#0
+main.ssl_dynamic                           : BUG#0
+x.connection_openssl                       : BUG#0
+x.connection_openssl_unixsocket            : BUG#0
+x.connection_tls_version                   : BUG#0
+main.slow_log                              : BUG#0
+main.ctype_unicode900_as_cs                : BUG#0
+
+# Failing consistently, but only on C9S ZUUL CI mock build
+main.loaddata_special                      : BUG#0
+
+# Failing on all arches since MySQL 8.0.28
+innodb.trigger_function_lock_compare       : BUG#0
+# Failing only in i686 since MySQL 8.0.28
+main.index_merge_myisam                    : BUG#0
+
 # Failing since MySQL 8.0.29
 main.mysqlpump_bugs                        : BUG#0
+main.slow_log                              : BUG#0
 
 # Failing since MySQL 8.0.30
 auth_sec.fips                              : BUG#0
 rpl.rpl_fips                               : BUG#0
-
-# Failing since MySQL 8.0.35
-binlog.binlog_mysqlbinlog_linux            : BUG#0
-perfschema.idx_session_connect_attrs       : BUG#0
-rpl_gtid.mysqldump_bug33630199             : BUG#0
-
-# Failing since MySQL 8.0.36
-main.generated_invisible_primary_key       : BUG#0
-main.slow_log                              : BUG#0
-main.archive_plugin                        : BUG#0
-main.blackhole_plugin                      : BUG#0
-main.events_read_only                      : BUG#0
-main.log_backtrace                         : BUG#0

SOURCES/rh-skipped-tests-list-ppc.list

@@ -1,5 +1,9 @@
 # ppc64le
 sys_vars.innodb_buffer_pool_size_basic     : BUG#0 fails only on ppc64le on f32+
 
-# Unstable on 8.0.35
+# Failing on RHEL 9 for MySQL release 8.0.27
-rpl.rpl_replica_terminology                : BUG#0
+main.sp-threads                            : BUG#0
+main.dd_upgrade_error                      : BUG#0
+main.dd_upgrade_non_debug                  : BUG#0
+main.dd_upgrade_partition                  : BUG#0
+main.partition_prefixkey_upgrade           : BUG#0

SOURCES/rh-skipped-tests-list-s390.list

@@ -1,5 +1,36 @@
+# Fails since 8.0.21
+x.resource_groups                                 : BUG#0
+
 # Fails since 8.0.22
 main.subquery_bugs                                : BUG#0
 
-# Failing on C9S & RHEL 9 for MySQL release 8.0.33
+# Fails since F32 Mass Rebuild
-main.subquery_sj_all_bka_nobnl                    : BUG#0
+gis.geometry_class_attri_prop                     : BUG#0
+gis.geometry_property_function_issimple           : BUG#0
+gis.gis_bugs_crashes                              : BUG#0
+gis.spatial_analysis_functions_buffer             : BUG#0
+gis.spatial_analysis_functions_centroid           : BUG#0
+gis.spatial_analysis_functions_distance           : BUG#0
+gis.spatial_operators_intersection                : BUG#0
+gis.spatial_operators_union                       : BUG#0
+gis.spatial_operators_symdifference               : BUG#0
+gis.spatial_op_testingfunc_mix                    : BUG#0
+gis.spatial_utility_function_distance_sphere      : BUG#0
+gis.spatial_utility_function_simplify             : BUG#0
+
+main.window_std_var                               : BUG#0
+main.window_std_var_optimized                     : BUG#0
+main.with_recursive                               : BUG#0
+
+# Unstable
+main.grant_dynamic_flush                          : BUG#0
+
+# Failing on C9S & RHEL 9 for MySQL release 8.0.27
+gis.st_symdifference                              : BUG#0
+main.regular_expressions_utf-8                    : BUG#0
+main.subquery_sj_dupsweed                         : BUG#0
+main.subquery_sj_dupsweed_bka                     : BUG#0
+main.subquery_sj_dupsweed_bka_nobnl               : BUG#0
+main.subquery_sj_firstmatch                       : BUG#0
+main.subquery_sj_firstmatch_bka                   : BUG#0
+main.subquery_sj_firstmatch_bka_nobnl             : BUG#0

SOURCES/server.cnf.in

@@ -13,6 +13,6 @@
 [mysqld]
 datadir=@MYSQL_DATADIR@
 socket=@MYSQL_UNIX_ADDR@
-log-error=@LOG_LOCATION@
+log-error=@LOGFILE_RPM@
 pid-file=@PID_FILE_DIR@/@DAEMON_NO_PREFIX@.pid