Compare commits

...

No commits in common. "imports/c8-beta/mdadm-4.1-8.el8" and "c8" have entirely different histories.

117 changed files with 12618 additions and 2279 deletions

2
.gitignore vendored
View File

@ -1 +1 @@
SOURCES/mdadm-4.1.tar.xz
SOURCES/mdadm-4.2.tar.xz

View File

@ -1 +1 @@
4bbbd02674ac67dc9773f41aace7677aa5374c1c SOURCES/mdadm-4.1.tar.xz
27f240cff200e00c28a486a028bcdb14f67f8790 SOURCES/mdadm-4.2.tar.xz

View File

@ -1,39 +0,0 @@
From 0833f9c3dbaaee202b92ea956f9e2decc7b9593a Mon Sep 17 00:00:00 2001
From: Gioh Kim <gi-oh.kim@profitbricks.com>
Date: Tue, 6 Nov 2018 15:27:42 +0100
Subject: [RHEL7.7 PATCH 01/24] Assemble: keep MD_DISK_FAILFAST and
MD_DISK_WRITEMOSTLY flag
Before updating superblock of slave disks, desired_state value
is set for the target state of the slave disks. But it forgets
to check MD_DISK_FAILFAST and MD_DISK_WRITEMOSTLY flags. Then
start_arrays() calls ADD_NEW_DISK ioctl-call and pass the state
without MD_DISK_FAILFAST and MD_DISK_WRITEMOSTLY.
Currenlty it does not generate any problem because kernel does not
care MD_DISK_FAILFAST or MD_DISK_WRITEMOSTLY flags.
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Assemble.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Assemble.c b/Assemble.c
index a79466c..f39c9e1 100644
--- a/Assemble.c
+++ b/Assemble.c
@@ -1704,6 +1704,9 @@ try_again:
else
desired_state = (1<<MD_DISK_ACTIVE) | (1<<MD_DISK_SYNC);
+ desired_state |= devices[j].i.disk.state & ((1<<MD_DISK_FAILFAST) |
+ (1<<MD_DISK_WRITEMOSTLY));
+
if (!devices[j].uptodate)
continue;
--
2.7.5

View File

@ -0,0 +1,47 @@
From f1cc8ab9ab6a92c3cd94ab7590b46285e214681e Mon Sep 17 00:00:00 2001
From: Lukasz Florczak <lukasz.florczak@linux.intel.com>
Date: Tue, 15 Mar 2022 09:30:30 +0100
Subject: [PATCH 01/83] Unify error message.
Provide the same error message for the same error that can occur in Grow.c and super-intel.c.
Signed-off-by: Lukasz Florczak <lukasz.florczak@linux.intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Grow.c | 4 ++--
super-intel.c | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/Grow.c b/Grow.c
index 9c6fc95e..9a947204 100644
--- a/Grow.c
+++ b/Grow.c
@@ -1001,8 +1001,8 @@ int remove_disks_for_takeover(struct supertype *st,
rv = 1;
sysfs_free(arrays);
if (rv) {
- pr_err("Error. Cannot perform operation on /dev/%s\n", st->devnm);
- pr_err("For this operation it MUST be single array in container\n");
+ pr_err("Error. Cannot perform operation on %s- for this operation "
+ "it MUST be single array in container\n", st->devnm);
return rv;
}
}
diff --git a/super-intel.c b/super-intel.c
index d5fad102..5ffa7636 100644
--- a/super-intel.c
+++ b/super-intel.c
@@ -11683,8 +11683,8 @@ enum imsm_reshape_type imsm_analyze_change(struct supertype *st,
struct imsm_super *mpb = super->anchor;
if (mpb->num_raid_devs > 1) {
- pr_err("Error. Cannot perform operation on %s- for this operation it MUST be single array in container\n",
- geo->dev_name);
+ pr_err("Error. Cannot perform operation on %s- for this operation "
+ "it MUST be single array in container\n", geo->dev_name);
change = -1;
}
}
--
2.38.1

View File

@ -1,77 +0,0 @@
From 6b6112842030309c297a521918d1a2e982426fa3 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.com>
Date: Fri, 9 Nov 2018 17:12:33 +1100
Subject: [RHEL7.7 PATCH 02/24] Document PART-POLICY lines
PART-POLICY has been accepted in mdadm.conf since the same
time that POLICY was accepted, but it was never documented.
So add the missing documentation.
Also fix a bug which would have stopped it from working if
anyone had ever tried to use it.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
mdadm.conf.5 | 24 +++++++++++++++++++++++-
policy.c | 2 +-
2 files changed, 24 insertions(+), 2 deletions(-)
diff --git a/mdadm.conf.5 b/mdadm.conf.5
index 18512cb..47c962a 100644
--- a/mdadm.conf.5
+++ b/mdadm.conf.5
@@ -501,7 +501,7 @@ To update hot plug configuration it is necessary to execute
.B mdadm \-\-udev\-rules
command after changing the config file
-Key words used in the
+Keywords used in the
.I POLICY
line and supported values are:
@@ -565,6 +565,28 @@ be automatically added to that array (or it's container)
as above and the disk will become a spare in remaining cases
.RE
+.TP
+.B PART-POLICY
+This is similar to
+.B POLICY
+and accepts the same keyword assignments. It allows a consistent set
+of policies to applied to each of the partitions of a device.
+
+A
+.B PART-POLICY
+line should set
+.I type=disk
+and identify the path to one or more disk devices. Each partition on
+these disks will be treated according to the
+.I action=
+setting from this line. If a
+.I domain
+is set in the line, then the domain associated with each patition will
+be based on the domain, but with
+.RB \(dq -part N\(dq
+appended, when N is the partition number for the partition that was
+found.
+
.SH EXAMPLE
DEVICE /dev/sd[bcdjkl]1
.br
diff --git a/policy.c b/policy.c
index c0d18a7..258f393 100644
--- a/policy.c
+++ b/policy.c
@@ -300,7 +300,7 @@ static int path_has_part(char *path, char **part)
l--;
if (l < 5 || strncmp(path+l-5, "-part", 5) != 0)
return 0;
- *part = path+l-4;
+ *part = path+l-5;
return 1;
}
--
2.7.5

View File

@ -0,0 +1,33 @@
From 5ce5a15f0bf007e850e15259bba4f53736605fb2 Mon Sep 17 00:00:00 2001
From: Lukasz Florczak <lukasz.florczak@linux.intel.com>
Date: Fri, 25 Mar 2022 12:48:59 +0100
Subject: [PATCH 02/83] mdadm: Fix double free
If there was a size mismatch after creation it would get fixed on grow
in imsm_fix_size_mismatch(), but due to double free "double free or corruption (fasttop)"
error occurs and grow cannot proceed.
Signed-off-by: Lukasz Florczak <lukasz.florczak@linux.intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
super-intel.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/super-intel.c b/super-intel.c
index 5ffa7636..6ff336ee 100644
--- a/super-intel.c
+++ b/super-intel.c
@@ -11783,9 +11783,8 @@ static int imsm_fix_size_mismatch(struct supertype *st, int subarray_index)
st->update_tail = &st->updates;
} else {
imsm_sync_metadata(st);
+ free(update);
}
-
- free(update);
}
ret_val = 0;
exit:
--
2.38.1

View File

@ -0,0 +1,83 @@
From fea026b4849182fc8413014c81456e7215af28d9 Mon Sep 17 00:00:00 2001
From: Mateusz Kusiak <mateusz.kusiak@intel.com>
Date: Wed, 23 Mar 2022 15:05:19 +0100
Subject: [PATCH 03/83] Grow_reshape: Add r0 grow size error message and update
man
Grow size on r0 is not supported for imsm and native metadata.
Add proper error message.
Update man for proper use of --size.
Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Grow.c | 6 ++++++
mdadm.8.in | 19 ++++++++++++-------
2 files changed, 18 insertions(+), 7 deletions(-)
diff --git a/Grow.c b/Grow.c
index 9a947204..aa72490b 100644
--- a/Grow.c
+++ b/Grow.c
@@ -1998,6 +1998,12 @@ int Grow_reshape(char *devname, int fd,
goto release;
}
+ if (array.level == 0) {
+ pr_err("Component size change is not supported for RAID0\n");
+ rv = 1;
+ goto release;
+ }
+
if (reshape_super(st, s->size, UnSet, UnSet, 0, 0, UnSet, NULL,
devname, APPLY_METADATA_CHANGES,
c->verbose > 0)) {
diff --git a/mdadm.8.in b/mdadm.8.in
index be902dba..e2a42425 100644
--- a/mdadm.8.in
+++ b/mdadm.8.in
@@ -459,7 +459,8 @@ number of spare devices.
.TP
.BR \-z ", " \-\-size=
-Amount (in Kilobytes) of space to use from each drive in RAID levels 1/4/5/6.
+Amount (in Kilobytes) of space to use from each drive in RAID levels 1/4/5/6/10
+and for RAID 0 on external metadata.
This must be a multiple of the chunk size, and must leave about 128Kb
of space at the end of the drive for the RAID superblock.
If this is not specified
@@ -478,10 +479,19 @@ To guard against this it can be useful to set the initial size
slightly smaller than the smaller device with the aim that it will
still be larger than any replacement.
+This option can be used with
+.B \-\-create
+for determining initial size of an array. For external metadata,
+it can be used on a volume, but not on a container itself.
+Setting initial size of
+.B RAID 0
+array is only valid for external metadata.
+
This value can be set with
.B \-\-grow
-for RAID level 1/4/5/6 though
+for RAID level 1/4/5/6/10 though
DDF arrays may not be able to support this.
+RAID 0 array size cannot be changed.
If the array was created with a size smaller than the currently
active drives, the extra space can be accessed using
.BR \-\-grow .
@@ -501,11 +511,6 @@ problems the array can be made bigger again with no loss with another
.B "\-\-grow \-\-size="
command.
-This value cannot be used when creating a
-.B CONTAINER
-such as with DDF and IMSM metadata, though it perfectly valid when
-creating an array inside a container.
-
.TP
.BR \-Z ", " \-\-array\-size=
This is only meaningful with
--
2.38.1

View File

@ -1,334 +0,0 @@
From cd72f9d114da206baa01fd56ff2d8ffcc08f3239 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.com>
Date: Fri, 9 Nov 2018 17:12:33 +1100
Subject: [RHEL7.7 PATCH 03/24] policy: support devices with multiple paths.
As new releases of Linux some time change the name of
a path, some distros keep "legacy" names as well. This
is useful, but confuses mdadm which assumes each device has
precisely one path.
So change this assumption: allow a disk to have several
paths, and allow any to match when looking for a policy
which matches a disk.
Reported-and-tested-by: Mariusz Tkaczyk <mariusz.tkaczyk@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Incremental.c | 5 +-
mdadm.h | 2 +-
policy.c | 163 ++++++++++++++++++++++++++++++++--------------------------
3 files changed, 95 insertions(+), 75 deletions(-)
diff --git a/Incremental.c b/Incremental.c
index a4ff7d4..d4d3c35 100644
--- a/Incremental.c
+++ b/Incremental.c
@@ -1080,6 +1080,7 @@ static int partition_try_spare(char *devname, int *dfdp, struct dev_policy *pol,
struct supertype *st2 = NULL;
char *devname = NULL;
unsigned long long devsectors;
+ char *pathlist[2];
if (de->d_ino == 0 || de->d_name[0] == '.' ||
(de->d_type != DT_LNK && de->d_type != DT_UNKNOWN))
@@ -1094,7 +1095,9 @@ static int partition_try_spare(char *devname, int *dfdp, struct dev_policy *pol,
/* This is a partition - skip it */
goto next;
- pol2 = path_policy(de->d_name, type_disk);
+ pathlist[0] = de->d_name;
+ pathlist[1] = NULL;
+ pol2 = path_policy(pathlist, type_disk);
domain_merge(&domlist, pol2, st ? st->ss->name : NULL);
if (domain_test(domlist, pol, st ? st->ss->name : NULL) != 1)
diff --git a/mdadm.h b/mdadm.h
index 387e681..705bd9b 100644
--- a/mdadm.h
+++ b/mdadm.h
@@ -1247,7 +1247,7 @@ extern void policyline(char *line, char *type);
extern void policy_add(char *type, ...);
extern void policy_free(void);
-extern struct dev_policy *path_policy(char *path, char *type);
+extern struct dev_policy *path_policy(char **paths, char *type);
extern struct dev_policy *disk_policy(struct mdinfo *disk);
extern struct dev_policy *devid_policy(int devid);
extern void dev_policy_free(struct dev_policy *p);
diff --git a/policy.c b/policy.c
index 258f393..fa67d55 100644
--- a/policy.c
+++ b/policy.c
@@ -189,15 +189,17 @@ struct dev_policy *pol_find(struct dev_policy *pol, char *name)
return pol;
}
-static char *disk_path(struct mdinfo *disk)
+static char **disk_paths(struct mdinfo *disk)
{
struct stat stb;
int prefix_len;
DIR *by_path;
char symlink[PATH_MAX] = "/dev/disk/by-path/";
- char nm[PATH_MAX];
+ char **paths;
+ int cnt = 0;
struct dirent *ent;
- int rv;
+
+ paths = xmalloc(sizeof(*paths) * (cnt+1));
by_path = opendir(symlink);
if (by_path) {
@@ -214,22 +216,13 @@ static char *disk_path(struct mdinfo *disk)
continue;
if (stb.st_rdev != makedev(disk->disk.major, disk->disk.minor))
continue;
- closedir(by_path);
- return xstrdup(ent->d_name);
+ paths[cnt++] = xstrdup(ent->d_name);
+ paths = xrealloc(paths, sizeof(*paths) * (cnt+1));
}
closedir(by_path);
}
- /* A NULL path isn't really acceptable - use the devname.. */
- sprintf(symlink, "/sys/dev/block/%d:%d", disk->disk.major, disk->disk.minor);
- rv = readlink(symlink, nm, sizeof(nm)-1);
- if (rv > 0) {
- char *dname;
- nm[rv] = 0;
- dname = strrchr(nm, '/');
- if (dname)
- return xstrdup(dname + 1);
- }
- return xstrdup("unknown");
+ paths[cnt] = NULL;
+ return paths;
}
char type_part[] = "part";
@@ -246,18 +239,53 @@ static char *disk_type(struct mdinfo *disk)
return type_disk;
}
-static int pol_match(struct rule *rule, char *path, char *type)
+static int path_has_part(char *path, char **part)
+{
+ /* check if path ends with "-partNN" and
+ * if it does, place a pointer to "-pathNN"
+ * in 'part'.
+ */
+ int l;
+ if (!path)
+ return 0;
+ l = strlen(path);
+ while (l > 1 && isdigit(path[l-1]))
+ l--;
+ if (l < 5 || strncmp(path+l-5, "-part", 5) != 0)
+ return 0;
+ *part = path+l-5;
+ return 1;
+}
+
+static int pol_match(struct rule *rule, char **paths, char *type, char **part)
{
- /* check if this rule matches on path and type */
+ /* Check if this rule matches on any path and type.
+ * If 'part' is not NULL, then 'path' must end in -partN, which
+ * we ignore for matching, and return in *part on success.
+ */
int pathok = 0; /* 0 == no path, 1 == match, -1 == no match yet */
int typeok = 0;
- while (rule) {
+ for (; rule; rule = rule->next) {
if (rule->name == rule_path) {
+ char *p;
+ int i;
if (pathok == 0)
pathok = -1;
- if (path && fnmatch(rule->value, path, 0) == 0)
- pathok = 1;
+ if (!paths)
+ continue;
+ for (i = 0; paths[i]; i++) {
+ if (part) {
+ if (!path_has_part(paths[i], &p))
+ continue;
+ *p = '\0';
+ *part = p+1;
+ }
+ if (fnmatch(rule->value, paths[i], 0) == 0)
+ pathok = 1;
+ if (part)
+ *p = '-';
+ }
}
if (rule->name == rule_type) {
if (typeok == 0)
@@ -265,7 +293,6 @@ static int pol_match(struct rule *rule, char *path, char *type)
if (type && strcmp(rule->value, type) == 0)
typeok = 1;
}
- rule = rule->next;
}
return pathok >= 0 && typeok >= 0;
}
@@ -286,24 +313,6 @@ static void pol_merge(struct dev_policy **pol, struct rule *rule)
pol_new(pol, r->name, r->value, metadata);
}
-static int path_has_part(char *path, char **part)
-{
- /* check if path ends with "-partNN" and
- * if it does, place a pointer to "-pathNN"
- * in 'part'.
- */
- int l;
- if (!path)
- return 0;
- l = strlen(path);
- while (l > 1 && isdigit(path[l-1]))
- l--;
- if (l < 5 || strncmp(path+l-5, "-part", 5) != 0)
- return 0;
- *part = path+l-5;
- return 1;
-}
-
static void pol_merge_part(struct dev_policy **pol, struct rule *rule, char *part)
{
/* copy any name assignments from rule into pol, appending
@@ -352,7 +361,7 @@ static int config_rules_has_path = 0;
* path_policy() gathers policy information for the
* disk described in the given a 'path' and a 'type'.
*/
-struct dev_policy *path_policy(char *path, char *type)
+struct dev_policy *path_policy(char **paths, char *type)
{
struct pol_rule *rules;
struct dev_policy *pol = NULL;
@@ -361,27 +370,24 @@ struct dev_policy *path_policy(char *path, char *type)
rules = config_rules;
while (rules) {
- char *part;
+ char *part = NULL;
if (rules->type == rule_policy)
- if (pol_match(rules->rule, path, type))
+ if (pol_match(rules->rule, paths, type, NULL))
pol_merge(&pol, rules->rule);
if (rules->type == rule_part && strcmp(type, type_part) == 0)
- if (path_has_part(path, &part)) {
- *part = 0;
- if (pol_match(rules->rule, path, type_disk))
- pol_merge_part(&pol, rules->rule, part+1);
- *part = '-';
- }
+ if (pol_match(rules->rule, paths, type_disk, &part))
+ pol_merge_part(&pol, rules->rule, part);
rules = rules->next;
}
/* Now add any metadata-specific internal knowledge
* about this path
*/
- for (i=0; path && superlist[i]; i++)
+ for (i=0; paths[0] && superlist[i]; i++)
if (superlist[i]->get_disk_controller_domain) {
const char *d =
- superlist[i]->get_disk_controller_domain(path);
+ superlist[i]->get_disk_controller_domain(
+ paths[0]);
if (d)
pol_new(&pol, pol_domain, d, superlist[i]->name);
}
@@ -400,22 +406,34 @@ void pol_add(struct dev_policy **pol,
pol_dedup(*pol);
}
+static void free_paths(char **paths)
+{
+ int i;
+
+ if (!paths)
+ return;
+
+ for (i = 0; paths[i]; i++)
+ free(paths[i]);
+ free(paths);
+}
+
/*
* disk_policy() gathers policy information for the
* disk described in the given mdinfo (disk.{major,minor}).
*/
struct dev_policy *disk_policy(struct mdinfo *disk)
{
- char *path = NULL;
+ char **paths = NULL;
char *type = disk_type(disk);
struct dev_policy *pol = NULL;
if (config_rules_has_path)
- path = disk_path(disk);
+ paths = disk_paths(disk);
- pol = path_policy(path, type);
+ pol = path_policy(paths, type);
- free(path);
+ free_paths(paths);
return pol;
}
@@ -756,27 +774,26 @@ int policy_check_path(struct mdinfo *disk, struct map_ent *array)
{
char path[PATH_MAX];
FILE *f = NULL;
- char *id_path = disk_path(disk);
- int rv;
+ char **id_paths = disk_paths(disk);
+ int i;
+ int rv = 0;
- if (!id_path)
- return 0;
+ for (i = 0; id_paths[i]; i++) {
+ snprintf(path, PATH_MAX, FAILED_SLOTS_DIR "/%s", id_paths[i]);
+ f = fopen(path, "r");
+ if (!f)
+ continue;
- snprintf(path, PATH_MAX, FAILED_SLOTS_DIR "/%s", id_path);
- f = fopen(path, "r");
- if (!f) {
- free(id_path);
- return 0;
+ rv = fscanf(f, " %s %x:%x:%x:%x\n",
+ array->metadata,
+ array->uuid,
+ array->uuid+1,
+ array->uuid+2,
+ array->uuid+3);
+ fclose(f);
+ break;
}
-
- rv = fscanf(f, " %s %x:%x:%x:%x\n",
- array->metadata,
- array->uuid,
- array->uuid+1,
- array->uuid+2,
- array->uuid+3);
- fclose(f);
- free(id_path);
+ free_paths(id_paths);
return rv == 5;
}
--
2.7.5

View File

@ -1,137 +0,0 @@
From 4199d3c629c14866505923d19fa50017ee92d2e1 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.com>
Date: Wed, 5 Dec 2018 16:35:00 +1100
Subject: [RHEL7.7 PATCH 04/24] mdcheck: add systemd unit files to run mdcheck.
Having the mdcheck script is not use if is never run.
This patch adds systemd unit files so that it can easily
be run on the first Sunday of each month for 6 hours,
then on every subsequent morning until the check is
finished.
The units still need to be enabled with
systemctl enable mdcheck_start.timer
The timer will only actually be started when an array
which might need it becomes active.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Makefile | 5 ++++-
systemd/mdcheck_continue.service | 18 ++++++++++++++++++
systemd/mdcheck_continue.timer | 13 +++++++++++++
systemd/mdcheck_start.service | 17 +++++++++++++++++
systemd/mdcheck_start.timer | 15 +++++++++++++++
5 files changed, 67 insertions(+), 1 deletion(-)
create mode 100644 systemd/mdcheck_continue.service
create mode 100644 systemd/mdcheck_continue.timer
create mode 100644 systemd/mdcheck_start.service
create mode 100644 systemd/mdcheck_start.timer
diff --git a/Makefile b/Makefile
index 2767ac6..afb62cc 100644
--- a/Makefile
+++ b/Makefile
@@ -276,7 +276,10 @@ install-udev: udev-md-raid-arrays.rules udev-md-raid-assembly.rules udev-md-raid
install-systemd: systemd/mdmon@.service
@for file in mdmon@.service mdmonitor.service mdadm-last-resort@.timer \
- mdadm-last-resort@.service mdadm-grow-continue@.service; \
+ mdadm-last-resort@.service mdadm-grow-continue@.service \
+ mdcheck_start.timer mdcheck_start.service \
+ mdcheck_continue.timer mdcheck_continue.service \
+ ; \
do sed -e 's,BINDIR,$(BINDIR),g' systemd/$$file > .install.tmp.2 && \
$(ECHO) $(INSTALL) -D -m 644 systemd/$$file $(DESTDIR)$(SYSTEMD_DIR)/$$file ; \
$(INSTALL) -D -m 644 .install.tmp.2 $(DESTDIR)$(SYSTEMD_DIR)/$$file ; \
diff --git a/systemd/mdcheck_continue.service b/systemd/mdcheck_continue.service
new file mode 100644
index 0000000..592c607
--- /dev/null
+++ b/systemd/mdcheck_continue.service
@@ -0,0 +1,18 @@
+# This file is part of mdadm.
+#
+# mdadm is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+
+[Unit]
+Description=MD array scrubbing - continuation
+ConditionPathExistsGlob = /var/lib/mdcheck/MD_UUID_*
+
+[Service]
+Type=oneshot
+Environment= MDADM_CHECK_DURATION='"6 hours"'
+EnvironmentFile=-/run/sysconfig/mdadm
+ExecStartPre=-/usr/lib/mdadm/mdadm_env.sh
+ExecStart=/usr/share/mdadm/mdcheck --continue --duration $MDADM_CHECK_DURATION
+
diff --git a/systemd/mdcheck_continue.timer b/systemd/mdcheck_continue.timer
new file mode 100644
index 0000000..3ccfd78
--- /dev/null
+++ b/systemd/mdcheck_continue.timer
@@ -0,0 +1,13 @@
+# This file is part of mdadm.
+#
+# mdadm is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+
+[Unit]
+Description=MD array scrubbing - continuation
+
+[Timer]
+OnCalendar= 1:05:00
+
diff --git a/systemd/mdcheck_start.service b/systemd/mdcheck_start.service
new file mode 100644
index 0000000..812141b
--- /dev/null
+++ b/systemd/mdcheck_start.service
@@ -0,0 +1,17 @@
+# This file is part of mdadm.
+#
+# mdadm is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+
+[Unit]
+Description=MD array scrubbing
+Wants=mdcheck_continue.timer
+
+[Service]
+Type=oneshot
+Environment= MDADM_CHECK_DURATION='"6 hours"'
+EnvironmentFile=-/run/sysconfig/mdadm
+ExecStartPre=-/usr/lib/mdadm/mdadm_env.sh
+ExecStart=/usr/share/mdadm/mdcheck --duration $MDADM_CHECK_DURATION
diff --git a/systemd/mdcheck_start.timer b/systemd/mdcheck_start.timer
new file mode 100644
index 0000000..6480736
--- /dev/null
+++ b/systemd/mdcheck_start.timer
@@ -0,0 +1,15 @@
+# This file is part of mdadm.
+#
+# mdadm is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+
+[Unit]
+Description=MD array scrubbing
+
+[Timer]
+OnCalendar=Sun *-*-1..7 1:00:00
+
+[Install]
+WantedBy= mdmonitor.service
--
2.7.5

View File

@ -0,0 +1,67 @@
From cf9a109209aad285372b67306d54118af6fc522b Mon Sep 17 00:00:00 2001
From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Date: Fri, 14 Jan 2022 16:44:33 +0100
Subject: [PATCH 04/83] udev: adapt rules to systemd v247
New events have been added in kernel 4.14 ("bind" and "unbind").
Systemd maintainer suggests to modify "add|change" branches.
This patches implements their suggestions. There is no issue yet because
new event types are not used in md.
Please see systemd announcement for details[1].
[1] https://lists.freedesktop.org/archives/systemd-devel/2020-November/045646.html
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
udev-md-raid-arrays.rules | 2 +-
udev-md-raid-assembly.rules | 5 +++--
udev-md-raid-safe-timeouts.rules | 2 +-
3 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/udev-md-raid-arrays.rules b/udev-md-raid-arrays.rules
index 13c9076e..2967ace1 100644
--- a/udev-md-raid-arrays.rules
+++ b/udev-md-raid-arrays.rules
@@ -3,7 +3,7 @@
SUBSYSTEM!="block", GOTO="md_end"
# handle md arrays
-ACTION!="add|change", GOTO="md_end"
+ACTION=="remove", GOTO="md_end"
KERNEL!="md*", GOTO="md_end"
# partitions have no md/{array_state,metadata_version}, but should not
diff --git a/udev-md-raid-assembly.rules b/udev-md-raid-assembly.rules
index d668cddd..39b4344b 100644
--- a/udev-md-raid-assembly.rules
+++ b/udev-md-raid-assembly.rules
@@ -30,8 +30,9 @@ LABEL="md_inc"
# remember you can limit what gets auto/incrementally assembled by
# mdadm.conf(5)'s 'AUTO' and selectively whitelist using 'ARRAY'
-ACTION=="add|change", IMPORT{program}="BINDIR/mdadm --incremental --export $devnode --offroot $env{DEVLINKS}"
-ACTION=="add|change", ENV{MD_STARTED}=="*unsafe*", ENV{MD_FOREIGN}=="no", ENV{SYSTEMD_WANTS}+="mdadm-last-resort@$env{MD_DEVICE}.timer"
+ACTION!="remove", IMPORT{program}="BINDIR/mdadm --incremental --export $devnode --offroot $env{DEVLINKS}"
+ACTION!="remove", ENV{MD_STARTED}=="*unsafe*", ENV{MD_FOREIGN}=="no", ENV{SYSTEMD_WANTS}+="mdadm-last-resort@$env{MD_DEVICE}.timer"
+
ACTION=="remove", ENV{ID_PATH}=="?*", RUN+="BINDIR/mdadm -If $name --path $env{ID_PATH}"
ACTION=="remove", ENV{ID_PATH}!="?*", RUN+="BINDIR/mdadm -If $name"
diff --git a/udev-md-raid-safe-timeouts.rules b/udev-md-raid-safe-timeouts.rules
index 12bdcaa8..2e185cee 100644
--- a/udev-md-raid-safe-timeouts.rules
+++ b/udev-md-raid-safe-timeouts.rules
@@ -50,7 +50,7 @@ ENV{DEVTYPE}!="partition", GOTO="md_timeouts_end"
IMPORT{program}="/sbin/mdadm --examine --export $devnode"
-ACTION=="add|change", \
+ACTION!="remove", \
ENV{ID_FS_TYPE}=="linux_raid_member", \
ENV{MD_LEVEL}=="raid[1-9]*", \
TEST=="/sys/block/$parent/device/timeout", \
--
2.38.1

View File

@ -1,83 +0,0 @@
From 7cd7e91ab3de5aa75dc963cb08b0618c1885cf0d Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.com>
Date: Wed, 5 Dec 2018 16:35:00 +1100
Subject: [RHEL7.7 PATCH 05/24] Monitor: add system timer to run --oneshot
periodically
"mdadm --monitor --oneshot" can be used to get a warning
if there are any degraded arrays. It can be helpful to get
this warning periodically while the condition persists.
This patch add a systemd service and timer which can
be enabled with
systemctl enable mdmonitor-oneshot.service
and will then provide daily warnings.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Makefile | 1 +
systemd/mdmonitor-oneshot.service | 15 +++++++++++++++
systemd/mdmonitor-oneshot.timer | 15 +++++++++++++++
3 files changed, 31 insertions(+)
create mode 100644 systemd/mdmonitor-oneshot.service
create mode 100644 systemd/mdmonitor-oneshot.timer
diff --git a/Makefile b/Makefile
index afb62cc..dfe00b0 100644
--- a/Makefile
+++ b/Makefile
@@ -279,6 +279,7 @@ install-systemd: systemd/mdmon@.service
mdadm-last-resort@.service mdadm-grow-continue@.service \
mdcheck_start.timer mdcheck_start.service \
mdcheck_continue.timer mdcheck_continue.service \
+ mdmonitor-oneshot.timer mdmonitor-oneshot.service \
; \
do sed -e 's,BINDIR,$(BINDIR),g' systemd/$$file > .install.tmp.2 && \
$(ECHO) $(INSTALL) -D -m 644 systemd/$$file $(DESTDIR)$(SYSTEMD_DIR)/$$file ; \
diff --git a/systemd/mdmonitor-oneshot.service b/systemd/mdmonitor-oneshot.service
new file mode 100644
index 0000000..fd469b1
--- /dev/null
+++ b/systemd/mdmonitor-oneshot.service
@@ -0,0 +1,15 @@
+# This file is part of mdadm.
+#
+# mdadm is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+
+[Unit]
+Description=Reminder for degraded MD arrays
+
+[Service]
+Environment= MDADM_MONITOR_ARGS=--scan
+EnvironmentFile=-/run/sysconfig/mdadm
+ExecStartPre=-/usr/lib/mdadm/mdadm_env.sh
+ExecStart=BINDIR/mdadm --monitor --oneshot $MDADM_MONITOR_ARGS
diff --git a/systemd/mdmonitor-oneshot.timer b/systemd/mdmonitor-oneshot.timer
new file mode 100644
index 0000000..cb54bda
--- /dev/null
+++ b/systemd/mdmonitor-oneshot.timer
@@ -0,0 +1,15 @@
+# This file is part of mdadm.
+#
+# mdadm is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+
+[Unit]
+Description=Reminder for degraded MD arrays
+
+[Timer]
+OnCalendar= 2:00:00
+
+[Install]
+WantedBy= mdmonitor.service
--
2.7.5

View File

@ -0,0 +1,252 @@
From 83a379cfbd283b387919fe05d44eb4c49e155ad6 Mon Sep 17 00:00:00 2001
From: Lukasz Florczak <lukasz.florczak@linux.intel.com>
Date: Mon, 21 Feb 2022 13:05:20 +0100
Subject: [PATCH 05/83] Replace error prone signal() with sigaction()
Up to this date signal() was used which implementation could vary [1].
Sigaction() call is preferred. This commit introduces replacement
from signal() to sigaction() by the use of signal_s() wrapper.
Also remove redundant signal.h header includes.
[1] https://man7.org/linux/man-pages/man2/signal.2.html
Signed-off-by: Lukasz Florczak <lukasz.florczak@linux.intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Grow.c | 4 ++--
Monitor.c | 5 +++--
managemon.c | 1 -
mdadm.h | 22 ++++++++++++++++++++++
mdmon.c | 1 -
monitor.c | 1 -
probe_roms.c | 6 +++---
raid6check.c | 25 +++++++++++++++----------
util.c | 1 -
9 files changed, 45 insertions(+), 21 deletions(-)
diff --git a/Grow.c b/Grow.c
index aa72490b..18c5719b 100644
--- a/Grow.c
+++ b/Grow.c
@@ -26,7 +26,6 @@
#include <sys/mman.h>
#include <stddef.h>
#include <stdint.h>
-#include <signal.h>
#include <sys/wait.h>
#if ! defined(__BIG_ENDIAN) && ! defined(__LITTLE_ENDIAN)
@@ -3566,7 +3565,8 @@ started:
fd = -1;
mlockall(MCL_FUTURE);
- signal(SIGTERM, catch_term);
+ if (signal_s(SIGTERM, catch_term) == SIG_ERR)
+ goto release;
if (st->ss->external) {
/* metadata handler takes it from here */
diff --git a/Monitor.c b/Monitor.c
index 30c031a2..c0ab5412 100644
--- a/Monitor.c
+++ b/Monitor.c
@@ -26,7 +26,6 @@
#include "md_p.h"
#include "md_u.h"
#include <sys/wait.h>
-#include <signal.h>
#include <limits.h>
#include <syslog.h>
#ifndef NO_LIBUDEV
@@ -435,8 +434,10 @@ static void alert(char *event, char *dev, char *disc, struct alert_info *info)
if (mp) {
FILE *mdstat;
char hname[256];
+
gethostname(hname, sizeof(hname));
- signal(SIGPIPE, SIG_IGN);
+ signal_s(SIGPIPE, SIG_IGN);
+
if (info->mailfrom)
fprintf(mp, "From: %s\n", info->mailfrom);
else
diff --git a/managemon.c b/managemon.c
index bb7334cf..0e9bdf00 100644
--- a/managemon.c
+++ b/managemon.c
@@ -106,7 +106,6 @@
#include "mdmon.h"
#include <sys/syscall.h>
#include <sys/socket.h>
-#include <signal.h>
static void close_aa(struct active_array *aa)
{
diff --git a/mdadm.h b/mdadm.h
index c7268a71..26e7e5cd 100644
--- a/mdadm.h
+++ b/mdadm.h
@@ -46,6 +46,7 @@ extern __off64_t lseek64 __P ((int __fd, __off64_t __offset, int __whence));
#include <string.h>
#include <syslog.h>
#include <stdbool.h>
+#include <signal.h>
/* Newer glibc requires sys/sysmacros.h directly for makedev() */
#include <sys/sysmacros.h>
#ifdef __dietlibc__
@@ -1729,6 +1730,27 @@ static inline char *to_subarray(struct mdstat_ent *ent, char *container)
return &ent->metadata_version[10+strlen(container)+1];
}
+/**
+ * signal_s() - Wrapper for sigaction() with signal()-like interface.
+ * @sig: The signal to set the signal handler to.
+ * @handler: The signal handler.
+ *
+ * Return: previous handler or SIG_ERR on failure.
+ */
+static inline sighandler_t signal_s(int sig, sighandler_t handler)
+{
+ struct sigaction new_act;
+ struct sigaction old_act;
+
+ new_act.sa_handler = handler;
+ new_act.sa_flags = 0;
+
+ if (sigaction(sig, &new_act, &old_act) == 0)
+ return old_act.sa_handler;
+
+ return SIG_ERR;
+}
+
#ifdef DEBUG
#define dprintf(fmt, arg...) \
fprintf(stderr, "%s: %s: "fmt, Name, __func__, ##arg)
diff --git a/mdmon.c b/mdmon.c
index c71e62c6..5570574b 100644
--- a/mdmon.c
+++ b/mdmon.c
@@ -56,7 +56,6 @@
#include <errno.h>
#include <string.h>
#include <fcntl.h>
-#include <signal.h>
#include <dirent.h>
#ifdef USE_PTHREADS
#include <pthread.h>
diff --git a/monitor.c b/monitor.c
index e0d3be67..b877e595 100644
--- a/monitor.c
+++ b/monitor.c
@@ -22,7 +22,6 @@
#include "mdmon.h"
#include <sys/syscall.h>
#include <sys/select.h>
-#include <signal.h>
static char *array_states[] = {
"clear", "inactive", "suspended", "readonly", "read-auto",
diff --git a/probe_roms.c b/probe_roms.c
index 7ea04c7a..94c80c2c 100644
--- a/probe_roms.c
+++ b/probe_roms.c
@@ -22,7 +22,6 @@
#include "probe_roms.h"
#include "mdadm.h"
#include <unistd.h>
-#include <signal.h>
#include <fcntl.h>
#include <sys/mman.h>
#include <sys/stat.h>
@@ -69,7 +68,8 @@ static int probe_address16(const __u16 *ptr, __u16 *val)
void probe_roms_exit(void)
{
- signal(SIGBUS, SIG_DFL);
+ signal_s(SIGBUS, SIG_DFL);
+
if (rom_fd >= 0) {
close(rom_fd);
rom_fd = -1;
@@ -98,7 +98,7 @@ int probe_roms_init(unsigned long align)
if (roms_init())
return -1;
- if (signal(SIGBUS, sigbus) == SIG_ERR)
+ if (signal_s(SIGBUS, sigbus) == SIG_ERR)
rc = -1;
if (rc == 0) {
fd = open("/dev/mem", O_RDONLY);
diff --git a/raid6check.c b/raid6check.c
index a8e6005b..99477761 100644
--- a/raid6check.c
+++ b/raid6check.c
@@ -24,7 +24,6 @@
#include "mdadm.h"
#include <stdint.h>
-#include <signal.h>
#include <sys/mman.h>
#define CHECK_PAGE_BITS (12)
@@ -130,30 +129,36 @@ void raid6_stats(int *disk, int *results, int raid_disks, int chunk_size)
}
int lock_stripe(struct mdinfo *info, unsigned long long start,
- int chunk_size, int data_disks, sighandler_t *sig) {
+ int chunk_size, int data_disks, sighandler_t *sig)
+{
int rv;
+
+ sig[0] = signal_s(SIGTERM, SIG_IGN);
+ sig[1] = signal_s(SIGINT, SIG_IGN);
+ sig[2] = signal_s(SIGQUIT, SIG_IGN);
+
+ if (sig[0] == SIG_ERR || sig[1] == SIG_ERR || sig[2] == SIG_ERR)
+ return 1;
+
if(mlockall(MCL_CURRENT | MCL_FUTURE) != 0) {
return 2;
}
- sig[0] = signal(SIGTERM, SIG_IGN);
- sig[1] = signal(SIGINT, SIG_IGN);
- sig[2] = signal(SIGQUIT, SIG_IGN);
-
rv = sysfs_set_num(info, NULL, "suspend_lo", start * chunk_size * data_disks);
rv |= sysfs_set_num(info, NULL, "suspend_hi", (start + 1) * chunk_size * data_disks);
return rv * 256;
}
-int unlock_all_stripes(struct mdinfo *info, sighandler_t *sig) {
+int unlock_all_stripes(struct mdinfo *info, sighandler_t *sig)
+{
int rv;
rv = sysfs_set_num(info, NULL, "suspend_lo", 0x7FFFFFFFFFFFFFFFULL);
rv |= sysfs_set_num(info, NULL, "suspend_hi", 0);
rv |= sysfs_set_num(info, NULL, "suspend_lo", 0);
- signal(SIGQUIT, sig[2]);
- signal(SIGINT, sig[1]);
- signal(SIGTERM, sig[0]);
+ signal_s(SIGQUIT, sig[2]);
+ signal_s(SIGINT, sig[1]);
+ signal_s(SIGTERM, sig[0]);
if(munlockall() != 0)
return 3;
diff --git a/util.c b/util.c
index 3d05d074..cc94f96e 100644
--- a/util.c
+++ b/util.c
@@ -35,7 +35,6 @@
#include <poll.h>
#include <ctype.h>
#include <dirent.h>
-#include <signal.h>
#include <dlfcn.h>
--
2.38.1

View File

@ -1,83 +0,0 @@
From d7a1fda2769ba272d89de6caeab35d52b73a9c3c Mon Sep 17 00:00:00 2001
From: Mariusz Tkaczyk <mariusz.tkaczyk@intel.com>
Date: Wed, 17 Oct 2018 12:11:41 +0200
Subject: [RHEL7.7 PATCH 06/24] imsm: update metadata correctly while raid10
double degradation
Mdmon calls end_migration() when map state changes from normal to
degraded. It is not valid because in raid 10 double degradation case
mdmon breaks checkpointing but array is still rebuilding.
In this case mdmon has to mark map as degraded and continues marking
recovery checkpoint in metadata. Migration can be finished only if newly
failed device is a rebuilding device.
Add catching double degraded to degraded transition. Migration is
finished but map state doesn't change, array is still degraded.
Update failed_disk_num correctly. If double degradation
happens rebuild will start on the lowest slot, but this variable points
to the first failed slot. If second fail happens while rebuild this
variable shouldn't be updated until rebuild is not finished.
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
super-intel.c | 25 +++++++++++++++++++------
1 file changed, 19 insertions(+), 6 deletions(-)
diff --git a/super-intel.c b/super-intel.c
index 6438987..d2035cc 100644
--- a/super-intel.c
+++ b/super-intel.c
@@ -8136,7 +8136,8 @@ static int mark_failure(struct intel_super *super,
set_imsm_ord_tbl_ent(map2, slot2,
idx | IMSM_ORD_REBUILD);
}
- if (map->failed_disk_num == 0xff)
+ if (map->failed_disk_num == 0xff ||
+ (!is_rebuilding(dev) && map->failed_disk_num > slot))
map->failed_disk_num = slot;
clear_disk_badblocks(super->bbm_log, ord_to_idx(ord));
@@ -8558,13 +8559,25 @@ static void imsm_set_disk(struct active_array *a, int n, int state)
break;
}
if (is_rebuilding(dev)) {
- dprintf_cont("while rebuilding.");
+ dprintf_cont("while rebuilding ");
if (map->map_state != map_state) {
- dprintf_cont(" Map state change");
- end_migration(dev, super, map_state);
+ dprintf_cont("map state change ");
+ if (n == map->failed_disk_num) {
+ dprintf_cont("end migration");
+ end_migration(dev, super, map_state);
+ } else {
+ dprintf_cont("raid10 double degradation, map state change");
+ map->map_state = map_state;
+ }
super->updates_pending++;
- } else if (!rebuild_done) {
+ } else if (!rebuild_done)
break;
+ else if (n == map->failed_disk_num) {
+ /* r10 double degraded to degraded transition */
+ dprintf_cont("raid10 double degradation end migration");
+ end_migration(dev, super, map_state);
+ a->last_checkpoint = 0;
+ super->updates_pending++;
}
/* check if recovery is really finished */
@@ -8575,7 +8588,7 @@ static void imsm_set_disk(struct active_array *a, int n, int state)
}
if (recovery_not_finished) {
dprintf_cont("\n");
- dprintf("Rebuild has not finished yet, state not changed");
+ dprintf_cont("Rebuild has not finished yet, map state changes only if raid10 double degradation happens");
if (a->last_checkpoint < mdi->recovery_start) {
a->last_checkpoint =
mdi->recovery_start;
--
2.7.5

File diff suppressed because it is too large Load Diff

View File

@ -1,43 +0,0 @@
From 563ac108659980b3d1e226fe416254a86656235f Mon Sep 17 00:00:00 2001
From: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Date: Tue, 6 Nov 2018 16:20:17 +0100
Subject: [RHEL7.7 PATCH 07/24] Assemble: mask FAILFAST and WRITEMOSTLY flags
when finding the most recent device
If devices[].i.disk.state has MD_DISK_FAILFAST or MD_DISK_WRITEMOSTLY
flag, it cannot be the most recent device. Both flags should be masked
before checking the state.
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Assemble.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/Assemble.c b/Assemble.c
index f39c9e1..9f75c68 100644
--- a/Assemble.c
+++ b/Assemble.c
@@ -578,6 +578,7 @@ static int load_devices(struct devs *devices, char *devmap,
struct supertype *tst;
int i;
int dfd;
+ int disk_state;
if (tmpdev->used != 1)
continue;
@@ -711,7 +712,9 @@ static int load_devices(struct devs *devices, char *devmap,
devices[devcnt].i.disk.major = major(stb.st_rdev);
devices[devcnt].i.disk.minor = minor(stb.st_rdev);
- if (devices[devcnt].i.disk.state == 6) {
+ disk_state = devices[devcnt].i.disk.state & ~((1<<MD_DISK_FAILFAST) |
+ (1<<MD_DISK_WRITEMOSTLY));
+ if (disk_state == ((1<<MD_DISK_ACTIVE) | (1<<MD_DISK_SYNC))) {
if (most_recent < 0 ||
devices[devcnt].i.events
> devices[most_recent].i.events) {
--
2.7.5

View File

@ -0,0 +1,48 @@
From c23400377bb3d8e98e810cd92dba478dac1dff82 Mon Sep 17 00:00:00 2001
From: Lukasz Florczak <lukasz.florczak@linux.intel.com>
Date: Fri, 18 Mar 2022 09:26:05 +0100
Subject: [PATCH 07/83] mdadm: Update ReadMe
Instead of hardcoded config file path give reference to config manual.
Add missing monitordelay and homecluster parameters.
Signed-off-by: Lukasz Florczak <lukasz.florczak@linux.intel.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
ReadMe.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/ReadMe.c b/ReadMe.c
index 81399765..8f873c48 100644
--- a/ReadMe.c
+++ b/ReadMe.c
@@ -613,7 +613,6 @@ char Help_incr[] =
;
char Help_config[] =
-"The /etc/mdadm.conf config file:\n\n"
" The config file contains, apart from blank lines and comment lines that\n"
" start with a hash(#), array lines, device lines, and various\n"
" configuration lines.\n"
@@ -636,10 +635,12 @@ char Help_config[] =
" than a device must match all of them to be considered.\n"
"\n"
" Other configuration lines include:\n"
-" mailaddr, mailfrom, program used for --monitor mode\n"
-" create, auto used when creating device names in /dev\n"
-" homehost, policy, part-policy used to guide policy in various\n"
-" situations\n"
+" mailaddr, mailfrom, program, monitordelay used for --monitor mode\n"
+" create, auto used when creating device names in /dev\n"
+" homehost, homecluster, policy, part-policy used to guide policy in various\n"
+" situations\n"
+"\n"
+"For more details see mdadm.conf(5).\n"
"\n"
;
--
2.38.1

View File

@ -1,34 +0,0 @@
From 085df42259cba7863cd6ebe5cd0d8492ac5b869e Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.com>
Date: Thu, 6 Dec 2018 10:35:41 +1100
Subject: [RHEL7.7 PATCH 08/24] Grow: avoid overflow in compute_backup_blocks()
With a chunk size of 16Meg and data drive count of 8,
this calculate can easily overflow the 'int' type that
is used for the multiplications.
So force it to use "long" instead.
Reported-and-tested-by: Ed Spiridonov <edo.rus@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Grow.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Grow.c b/Grow.c
index 4436a4d..76f82c0 100644
--- a/Grow.c
+++ b/Grow.c
@@ -1196,7 +1196,8 @@ unsigned long compute_backup_blocks(int nchunk, int ochunk,
/* Find GCD */
a = GCD(a, b);
/* LCM == product / GCD */
- blocks = (ochunk/512) * (nchunk/512) * odata * ndata / a;
+ blocks = (unsigned long)(ochunk/512) * (unsigned long)(nchunk/512) *
+ odata * ndata / a;
return blocks;
}
--
2.7.5

View File

@ -0,0 +1,203 @@
From 24e075c659d0a8718aabefe5af4c97195a188af7 Mon Sep 17 00:00:00 2001
From: Lukasz Florczak <lukasz.florczak@linux.intel.com>
Date: Fri, 18 Mar 2022 09:26:06 +0100
Subject: [PATCH 08/83] mdadm: Update config man regarding default files and
multi-keyword behavior
Simplify default and alternative config file and directory location references
from mdadm(8) as references to mdadm.conf(5). Add FILE section in config man
and explain order and conditions in which default and alternative config files
and directories are used.
Update config man behavior regarding parsing order when multiple keywords/config
files are involved.
Signed-off-by: Lukasz Florczak <lukasz.florczak@linux.intel.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
mdadm.8.in | 30 +++++++++--------------
mdadm.conf.5.in | 65 ++++++++++++++++++++++++++++++++++++++++++++-----
2 files changed, 71 insertions(+), 24 deletions(-)
diff --git a/mdadm.8.in b/mdadm.8.in
index 8b21ffd4..0be02e4a 100644
--- a/mdadm.8.in
+++ b/mdadm.8.in
@@ -266,14 +266,11 @@ the exact meaning of this option in different contexts.
.TP
.BR \-c ", " \-\-config=
-Specify the config file or directory. Default is to use
-.B {CONFFILE}
-and
-.BR {CONFFILE}.d ,
-or if those are missing then
-.B {CONFFILE2}
-and
-.BR {CONFFILE2}.d .
+Specify the config file or directory. If not specified, default config file
+and default conf.d directory will be used. See
+.BR mdadm.conf (5)
+for more details.
+
If the config file given is
.B "partitions"
then nothing will be read, but
@@ -2013,11 +2010,9 @@ The config file is only used if explicitly named with
.B \-\-config
or requested with (a possibly implicit)
.BR \-\-scan .
-In the later case,
-.B {CONFFILE}
-or
-.B {CONFFILE2}
-is used.
+In the later case, default config file is used. See
+.BR mdadm.conf (5)
+for more details.
If
.B \-\-scan
@@ -3346,16 +3341,15 @@ on Monitor mode.
.SS {CONFFILE} (or {CONFFILE2})
-The config file lists which devices may be scanned to see if
-they contain MD super block, and gives identifying information
-(e.g. UUID) about known MD arrays. See
+Default config file. See
.BR mdadm.conf (5)
for more details.
.SS {CONFFILE}.d (or {CONFFILE2}.d)
-A directory containing configuration files which are read in lexical
-order.
+Default directory containing configuration files. See
+.BR mdadm.conf (5)
+for more details.
.SS {MAP_PATH}
When
diff --git a/mdadm.conf.5.in b/mdadm.conf.5.in
index 83edd008..dd331a6a 100644
--- a/mdadm.conf.5.in
+++ b/mdadm.conf.5.in
@@ -88,7 +88,8 @@ but only the major and minor device numbers. It scans
.I /dev
to find the name that matches the numbers.
-If no DEVICE line is present, then "DEVICE partitions containers" is assumed.
+If no DEVICE line is present in any config file,
+then "DEVICE partitions containers" is assumed.
For example:
.IP
@@ -272,6 +273,10 @@ catenated with spaces to form the address.
Note that this value cannot be set via the
.I mdadm
commandline. It is only settable via the config file.
+There should only be one
+.B MAILADDR
+line and it should have only one address. Any subsequent addresses
+are silently ignored.
.TP
.B PROGRAM
@@ -286,7 +291,8 @@ device.
There should only be one
.B program
-line and it should be give only one program.
+line and it should be given only one program. Any subsequent programs
+are silently ignored.
.TP
@@ -295,7 +301,14 @@ The
.B create
line gives default values to be used when creating arrays, new members
of arrays, and device entries for arrays.
-These include:
+
+There should only be one
+.B create
+line. Any subsequent lines will override the previous settings.
+
+Keywords used in the
+.I CREATE
+line and supported values are:
.RS 4
.TP
@@ -475,8 +488,8 @@ The known metadata types are
.B AUTO
should be given at most once. Subsequent lines are silently ignored.
-Thus an earlier config file in a config directory will over-ride
-the setting in a later config file.
+Thus a later config file in a config directory will not overwrite
+the setting in an earlier config file.
.TP
.B POLICY
@@ -594,6 +607,7 @@ The
line lists custom values of MD device's sysfs attributes which will be
stored in sysfs after the array is assembled. Multiple lines are allowed and each
line has to contain the uuid or the name of the device to which it relates.
+Lines are applied in reverse order.
.RS 4
.TP
.B uuid=
@@ -621,7 +635,46 @@ is running in
.B \-\-monitor
mode.
.B \-d/\-\-delay
-command line argument takes precedence over the config file
+command line argument takes precedence over the config file.
+
+If multiple
+.B MINITORDELAY
+lines are provided, only first non-zero value is considered.
+
+.SH FILES
+
+.SS {CONFFILE}
+
+The default config file location, used when
+.I mdadm
+is running without --config option.
+
+.SS {CONFFILE}.d
+
+The default directory with config files. Used when
+.I mdadm
+is running without --config option, after successful reading of the
+.B {CONFFILE}
+default config file. Files in that directory
+are read in lexical order.
+
+
+.SS {CONFFILE2}
+
+Alternative config file that is read, when
+.I mdadm
+is running without --config option and the
+.B {CONFFILE}
+default config file was not opened successfully.
+
+.SS {CONFFILE2}.d
+
+The alternative directory with config files. Used when
+.I mdadm
+is runninng without --config option, after reading the
+.B {CONFFILE2}
+alternative config file whether it was successful or not. Files in
+that directory are read in lexical order.
.SH EXAMPLE
DEVICE /dev/sd[bcdjkl]1
--
2.38.1

View File

@ -1,30 +0,0 @@
From 76d505dec6c9f92564553596fc8350324be82463 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.com>
Date: Thu, 6 Dec 2018 10:36:28 +1100
Subject: [RHEL7.7 PATCH 09/24] Grow: report correct new chunk size.
When using "--grow --chunk=" to change chunk
size, the old chunksize is reported instead of the new.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Grow.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Grow.c b/Grow.c
index 76f82c0..363b209 100644
--- a/Grow.c
+++ b/Grow.c
@@ -3286,7 +3286,7 @@ static int reshape_array(char *container, int fd, char *devname,
goto release;
} else if (verbose >= 0)
printf("chunk size for %s set to %d\n",
- devname, array.chunk_size);
+ devname, info->new_chunk);
}
unfreeze(st);
return 0;
--
2.7.5

View File

@ -0,0 +1,45 @@
From c33bbda5b0e127bb161fd4ad44bcfaa2a5daf153 Mon Sep 17 00:00:00 2001
From: Lukasz Florczak <lukasz.florczak@linux.intel.com>
Date: Fri, 18 Mar 2022 09:26:07 +0100
Subject: [PATCH 09/83] mdadm: Update config manual
Add missing HOMECLUSTER keyword description.
Signed-off-by: Lukasz Florczak <lukasz.florczak@linux.intel.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
mdadm.conf.5.in | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/mdadm.conf.5.in b/mdadm.conf.5.in
index dd331a6a..cd4e6a9d 100644
--- a/mdadm.conf.5.in
+++ b/mdadm.conf.5.in
@@ -439,6 +439,23 @@ from any possible local name. e.g.
.B /dev/md/1_1
or
.BR /dev/md/home_0 .
+
+.TP
+.B HOMECLUSTER
+The
+.B homcluster
+line gives a default value for the
+.B \-\-homecluster=
+option to mdadm. It specifies the cluster name for the md device.
+The md device can be assembled only on the cluster which matches
+the name specified. If
+.B homcluster
+is not provided, mdadm tries to detect the cluster name automatically.
+
+There should only be one
+.B homecluster
+line. Any subsequent lines will be silently ignored.
+
.TP
.B AUTO
A list of names of metadata format can be given, each preceded by a
--
2.38.1

View File

@ -0,0 +1,153 @@
From 913f07d1db4a0078acc26d6ccabe1c315cf9273c Mon Sep 17 00:00:00 2001
From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Date: Thu, 20 Jan 2022 13:18:32 +0100
Subject: [PATCH 10/83] Create, Build: use default_layout()
This code is duplicated for Build mode so make default_layout() extern
and use it. Simplify the function structure.
It introduced change for Build mode, now for raid0 RAID0_ORIG_LAYOUT
will be returned same as for Create.
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Build.c | 23 +------------------
Create.c | 67 ++++++++++++++++++++++++++++++++++----------------------
mdadm.h | 1 +
3 files changed, 43 insertions(+), 48 deletions(-)
diff --git a/Build.c b/Build.c
index 962c2e37..8d6f6f58 100644
--- a/Build.c
+++ b/Build.c
@@ -71,28 +71,7 @@ int Build(char *mddev, struct mddev_dev *devlist,
}
if (s->layout == UnSet)
- switch(s->level) {
- default: /* no layout */
- s->layout = 0;
- break;
- case 10:
- s->layout = 0x102; /* near=2, far=1 */
- if (c->verbose > 0)
- pr_err("layout defaults to n1\n");
- break;
- case 5:
- case 6:
- s->layout = map_name(r5layout, "default");
- if (c->verbose > 0)
- pr_err("layout defaults to %s\n", map_num(r5layout, s->layout));
- break;
- case LEVEL_FAULTY:
- s->layout = map_name(faultylayout, "default");
-
- if (c->verbose > 0)
- pr_err("layout defaults to %s\n", map_num(faultylayout, s->layout));
- break;
- }
+ s->layout = default_layout(NULL, s->level, c->verbose);
/* We need to create the device. It can have no name. */
map_lock(&map);
diff --git a/Create.c b/Create.c
index 0ff1922d..9ea19de0 100644
--- a/Create.c
+++ b/Create.c
@@ -39,39 +39,54 @@ static int round_size_and_verify(unsigned long long *size, int chunk)
return 0;
}
-static int default_layout(struct supertype *st, int level, int verbose)
+/**
+ * default_layout() - Get default layout for level.
+ * @st: metadata requested, could be NULL.
+ * @level: raid level requested.
+ * @verbose: verbose level.
+ *
+ * Try to ask metadata handler first, otherwise use global defaults.
+ *
+ * Return: Layout or &UnSet, return value meaning depends of level used.
+ */
+int default_layout(struct supertype *st, int level, int verbose)
{
int layout = UnSet;
+ mapping_t *layout_map = NULL;
+ char *layout_name = NULL;
if (st && st->ss->default_geometry)
st->ss->default_geometry(st, &level, &layout, NULL);
- if (layout == UnSet)
- switch(level) {
- default: /* no layout */
- layout = 0;
- break;
- case 0:
- layout = RAID0_ORIG_LAYOUT;
- break;
- case 10:
- layout = 0x102; /* near=2, far=1 */
- if (verbose > 0)
- pr_err("layout defaults to n2\n");
- break;
- case 5:
- case 6:
- layout = map_name(r5layout, "default");
- if (verbose > 0)
- pr_err("layout defaults to %s\n", map_num(r5layout, layout));
- break;
- case LEVEL_FAULTY:
- layout = map_name(faultylayout, "default");
+ if (layout != UnSet)
+ return layout;
- if (verbose > 0)
- pr_err("layout defaults to %s\n", map_num(faultylayout, layout));
- break;
- }
+ switch (level) {
+ default: /* no layout */
+ layout = 0;
+ break;
+ case 0:
+ layout = RAID0_ORIG_LAYOUT;
+ break;
+ case 10:
+ layout = 0x102; /* near=2, far=1 */
+ layout_name = "n2";
+ break;
+ case 5:
+ case 6:
+ layout_map = r5layout;
+ break;
+ case LEVEL_FAULTY:
+ layout_map = faultylayout;
+ break;
+ }
+
+ if (layout_map) {
+ layout = map_name(layout_map, "default");
+ layout_name = map_num(layout_map, layout);
+ }
+ if (layout_name && verbose > 0)
+ pr_err("layout defaults to %s\n", layout_name);
return layout;
}
diff --git a/mdadm.h b/mdadm.h
index 26e7e5cd..cd72e711 100644
--- a/mdadm.h
+++ b/mdadm.h
@@ -1512,6 +1512,7 @@ extern int get_linux_version(void);
extern int mdadm_version(char *version);
extern unsigned long long parse_size(char *size);
extern int parse_uuid(char *str, int uuid[4]);
+int default_layout(struct supertype *st, int level, int verbose);
extern int is_near_layout_10(int layout);
extern int parse_layout_10(char *layout);
extern int parse_layout_faulty(char *layout);
--
2.38.1

View File

@ -1,31 +0,0 @@
From 467e6a1b4ece8e552ee638dab7f44a4d235ece1a Mon Sep 17 00:00:00 2001
From: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Date: Fri, 7 Dec 2018 12:04:44 +0100
Subject: [RHEL7.7 PATCH 10/24] policy.c: prevent NULL pointer referencing
paths could be NULL and paths[0] should be followed by NULL pointer
checking.
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
policy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/policy.c b/policy.c
index fa67d55..e3a0671 100644
--- a/policy.c
+++ b/policy.c
@@ -383,7 +383,7 @@ struct dev_policy *path_policy(char **paths, char *type)
/* Now add any metadata-specific internal knowledge
* about this path
*/
- for (i=0; paths[0] && superlist[i]; i++)
+ for (i=0; paths && paths[0] && superlist[i]; i++)
if (superlist[i]->get_disk_controller_domain) {
const char *d =
superlist[i]->get_disk_controller_domain(
--
2.7.5

View File

@ -0,0 +1,382 @@
From 5f21d67472ad08c1e96b4385254adba79aa1c467 Mon Sep 17 00:00:00 2001
From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Date: Thu, 20 Jan 2022 13:18:33 +0100
Subject: [PATCH 11/83] mdadm: add map_num_s()
map_num() returns NULL if key is not defined. This patch adds
alternative, non NULL version for cases where NULL is not expected.
There are many printf() calls where map_num() is called on variable
without NULL verification. It works, even if NULL is passed because
gcc is able to ignore NULL argument quietly but the behavior is
undefined. For safety reasons such usages will use map_num_s() now.
It is a potential point of regression.
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Assemble.c | 6 ++----
Create.c | 2 +-
Detail.c | 4 ++--
Grow.c | 16 ++++++++--------
Query.c | 4 ++--
maps.c | 24 ++++++++++++++++++++++++
mdadm.c | 20 ++++++++++----------
mdadm.h | 2 +-
super-ddf.c | 6 +++---
super-intel.c | 2 +-
super0.c | 2 +-
super1.c | 2 +-
sysfs.c | 9 +++++----
13 files changed, 61 insertions(+), 38 deletions(-)
diff --git a/Assemble.c b/Assemble.c
index 704b8293..9eac9ce0 100644
--- a/Assemble.c
+++ b/Assemble.c
@@ -63,7 +63,7 @@ static void set_array_assembly_status(struct context *c,
struct assembly_array_info *arr)
{
int raid_disks = arr->preexist_cnt + arr->new_cnt;
- char *status_msg = map_num(assemble_statuses, status);
+ char *status_msg = map_num_s(assemble_statuses, status);
if (c->export && result)
*result |= status;
@@ -77,9 +77,7 @@ static void set_array_assembly_status(struct context *c,
fprintf(stderr, " (%d new)", arr->new_cnt);
if (arr->exp_cnt)
fprintf(stderr, " ( + %d for expansion)", arr->exp_cnt);
- if (status_msg)
- fprintf(stderr, " %s", status_msg);
- fprintf(stderr, ".\n");
+ fprintf(stderr, " %s.\n", status_msg);
}
static int name_matches(char *found, char *required, char *homehost, int require_homehost)
diff --git a/Create.c b/Create.c
index 9ea19de0..c84c1ac8 100644
--- a/Create.c
+++ b/Create.c
@@ -83,7 +83,7 @@ int default_layout(struct supertype *st, int level, int verbose)
if (layout_map) {
layout = map_name(layout_map, "default");
- layout_name = map_num(layout_map, layout);
+ layout_name = map_num_s(layout_map, layout);
}
if (layout_name && verbose > 0)
pr_err("layout defaults to %s\n", layout_name);
diff --git a/Detail.c b/Detail.c
index 95d4cc70..ce7a8445 100644
--- a/Detail.c
+++ b/Detail.c
@@ -495,8 +495,8 @@ int Detail(char *dev, struct context *c)
if (array.state & (1 << MD_SB_CLEAN)) {
if ((array.level == 0) ||
(array.level == LEVEL_LINEAR))
- arrayst = map_num(sysfs_array_states,
- sra->array_state);
+ arrayst = map_num_s(sysfs_array_states,
+ sra->array_state);
else
arrayst = "clean";
} else {
diff --git a/Grow.c b/Grow.c
index 18c5719b..8a242b0f 100644
--- a/Grow.c
+++ b/Grow.c
@@ -547,7 +547,7 @@ int Grow_consistency_policy(char *devname, int fd, struct context *c, struct sha
if (s->consistency_policy != CONSISTENCY_POLICY_RESYNC &&
s->consistency_policy != CONSISTENCY_POLICY_PPL) {
pr_err("Operation not supported for consistency policy %s\n",
- map_num(consistency_policies, s->consistency_policy));
+ map_num_s(consistency_policies, s->consistency_policy));
return 1;
}
@@ -578,14 +578,14 @@ int Grow_consistency_policy(char *devname, int fd, struct context *c, struct sha
if (sra->consistency_policy == (unsigned)s->consistency_policy) {
pr_err("Consistency policy is already %s\n",
- map_num(consistency_policies, s->consistency_policy));
+ map_num_s(consistency_policies, s->consistency_policy));
ret = 1;
goto free_info;
} else if (sra->consistency_policy != CONSISTENCY_POLICY_RESYNC &&
sra->consistency_policy != CONSISTENCY_POLICY_PPL) {
pr_err("Current consistency policy is %s, cannot change to %s\n",
- map_num(consistency_policies, sra->consistency_policy),
- map_num(consistency_policies, s->consistency_policy));
+ map_num_s(consistency_policies, sra->consistency_policy),
+ map_num_s(consistency_policies, s->consistency_policy));
ret = 1;
goto free_info;
}
@@ -704,8 +704,8 @@ int Grow_consistency_policy(char *devname, int fd, struct context *c, struct sha
}
ret = sysfs_set_str(sra, NULL, "consistency_policy",
- map_num(consistency_policies,
- s->consistency_policy));
+ map_num_s(consistency_policies,
+ s->consistency_policy));
if (ret)
pr_err("Failed to change array consistency policy\n");
@@ -2241,7 +2241,7 @@ size_change_error:
info.new_layout = UnSet;
if (info.array.level == 6 && info.new_level == UnSet) {
char l[40], *h;
- strcpy(l, map_num(r6layout, info.array.layout));
+ strcpy(l, map_num_s(r6layout, info.array.layout));
h = strrchr(l, '-');
if (h && strcmp(h, "-6") == 0) {
*h = 0;
@@ -2266,7 +2266,7 @@ size_change_error:
info.new_layout = info.array.layout;
else if (info.array.level == 5 && info.new_level == 6) {
char l[40];
- strcpy(l, map_num(r5layout, info.array.layout));
+ strcpy(l, map_num_s(r5layout, info.array.layout));
strcat(l, "-6");
info.new_layout = map_name(r6layout, l);
} else {
diff --git a/Query.c b/Query.c
index 23fbf8aa..adcd231e 100644
--- a/Query.c
+++ b/Query.c
@@ -93,7 +93,7 @@ int Query(char *dev)
else {
printf("%s: %s %s %d devices, %d spare%s. Use mdadm --detail for more detail.\n",
dev, human_size_brief(larray_size,IEC),
- map_num(pers, level), raid_disks,
+ map_num_s(pers, level), raid_disks,
spare_disks, spare_disks == 1 ? "" : "s");
}
st = guess_super(fd);
@@ -131,7 +131,7 @@ int Query(char *dev)
dev,
info.disk.number, info.array.raid_disks,
activity,
- map_num(pers, info.array.level),
+ map_num_s(pers, info.array.level),
mddev);
if (st->ss == &super0)
put_md_name(mddev);
diff --git a/maps.c b/maps.c
index a4fd2797..20fcf719 100644
--- a/maps.c
+++ b/maps.c
@@ -166,6 +166,30 @@ mapping_t sysfs_array_states[] = {
{ NULL, ARRAY_UNKNOWN_STATE }
};
+/**
+ * map_num_s() - Safer alternative of map_num() function.
+ * @map: map to search.
+ * @num: key to match.
+ *
+ * Shall be used only if key existence is quaranted.
+ *
+ * Return: Pointer to name of the element.
+ */
+char *map_num_s(mapping_t *map, int num)
+{
+ char *ret = map_num(map, num);
+
+ assert(ret);
+ return ret;
+}
+
+/**
+ * map_num() - get element name by key.
+ * @map: map to search.
+ * @num: key to match.
+ *
+ * Return: Pointer to name of the element or NULL.
+ */
char *map_num(mapping_t *map, int num)
{
while (map->name) {
diff --git a/mdadm.c b/mdadm.c
index 26299b2e..be40686c 100644
--- a/mdadm.c
+++ b/mdadm.c
@@ -280,8 +280,8 @@ int main(int argc, char *argv[])
else
fprintf(stderr, "-%c", opt);
fprintf(stderr, " would set mdadm mode to \"%s\", but it is already set to \"%s\".\n",
- map_num(modes, newmode),
- map_num(modes, mode));
+ map_num_s(modes, newmode),
+ map_num_s(modes, mode));
exit(2);
} else if (!mode && newmode) {
mode = newmode;
@@ -544,7 +544,7 @@ int main(int argc, char *argv[])
switch(s.level) {
default:
pr_err("layout not meaningful for %s arrays.\n",
- map_num(pers, s.level));
+ map_num_s(pers, s.level));
exit(2);
case UnSet:
pr_err("raid level must be given before layout.\n");
@@ -1248,10 +1248,10 @@ int main(int argc, char *argv[])
if (option_index > 0)
pr_err(":option --%s not valid in %s mode\n",
long_options[option_index].name,
- map_num(modes, mode));
+ map_num_s(modes, mode));
else
pr_err("option -%c not valid in %s mode\n",
- opt, map_num(modes, mode));
+ opt, map_num_s(modes, mode));
exit(2);
}
@@ -1276,7 +1276,7 @@ int main(int argc, char *argv[])
if (s.consistency_policy != CONSISTENCY_POLICY_UNKNOWN &&
s.consistency_policy != CONSISTENCY_POLICY_JOURNAL) {
pr_err("--write-journal is not supported with consistency policy: %s\n",
- map_num(consistency_policies, s.consistency_policy));
+ map_num_s(consistency_policies, s.consistency_policy));
exit(2);
}
}
@@ -1285,12 +1285,12 @@ int main(int argc, char *argv[])
s.consistency_policy != CONSISTENCY_POLICY_UNKNOWN) {
if (s.level <= 0) {
pr_err("--consistency-policy not meaningful with level %s.\n",
- map_num(pers, s.level));
+ map_num_s(pers, s.level));
exit(2);
} else if (s.consistency_policy == CONSISTENCY_POLICY_JOURNAL &&
!s.journaldisks) {
pr_err("--write-journal is required for consistency policy: %s\n",
- map_num(consistency_policies, s.consistency_policy));
+ map_num_s(consistency_policies, s.consistency_policy));
exit(2);
} else if (s.consistency_policy == CONSISTENCY_POLICY_PPL &&
s.level != 5) {
@@ -1300,14 +1300,14 @@ int main(int argc, char *argv[])
(!s.bitmap_file ||
strcmp(s.bitmap_file, "none") == 0)) {
pr_err("--bitmap is required for consistency policy: %s\n",
- map_num(consistency_policies, s.consistency_policy));
+ map_num_s(consistency_policies, s.consistency_policy));
exit(2);
} else if (s.bitmap_file &&
strcmp(s.bitmap_file, "none") != 0 &&
s.consistency_policy != CONSISTENCY_POLICY_BITMAP &&
s.consistency_policy != CONSISTENCY_POLICY_JOURNAL) {
pr_err("--bitmap is not compatible with consistency policy: %s\n",
- map_num(consistency_policies, s.consistency_policy));
+ map_num_s(consistency_policies, s.consistency_policy));
exit(2);
}
}
diff --git a/mdadm.h b/mdadm.h
index cd72e711..09915a00 100644
--- a/mdadm.h
+++ b/mdadm.h
@@ -770,7 +770,7 @@ extern int restore_stripes(int *dest, unsigned long long *offsets,
#endif
#define SYSLOG_FACILITY LOG_DAEMON
-
+extern char *map_num_s(mapping_t *map, int num);
extern char *map_num(mapping_t *map, int num);
extern int map_name(mapping_t *map, char *name);
extern mapping_t r0layout[], r5layout[], r6layout[],
diff --git a/super-ddf.c b/super-ddf.c
index 3f304cdc..8cda23a7 100644
--- a/super-ddf.c
+++ b/super-ddf.c
@@ -1477,13 +1477,13 @@ static void examine_vds(struct ddf_super *sb)
printf("\n");
printf(" unit[%d] : %d\n", i, be16_to_cpu(ve->unit));
printf(" state[%d] : %s, %s%s\n", i,
- map_num(ddf_state, ve->state & 7),
+ map_num_s(ddf_state, ve->state & 7),
(ve->state & DDF_state_morphing) ? "Morphing, ": "",
(ve->state & DDF_state_inconsistent)? "Not Consistent" : "Consistent");
printf(" init state[%d] : %s\n", i,
- map_num(ddf_init_state, ve->init_state&DDF_initstate_mask));
+ map_num_s(ddf_init_state, ve->init_state & DDF_initstate_mask));
printf(" access[%d] : %s\n", i,
- map_num(ddf_access, (ve->init_state & DDF_access_mask) >> 6));
+ map_num_s(ddf_access, (ve->init_state & DDF_access_mask) >> 6));
printf(" Name[%d] : %.16s\n", i, ve->name);
examine_vd(i, sb, ve->guid);
}
diff --git a/super-intel.c b/super-intel.c
index 6ff336ee..ba3bd41f 100644
--- a/super-intel.c
+++ b/super-intel.c
@@ -5625,7 +5625,7 @@ static int init_super_imsm_volume(struct supertype *st, mdu_array_info_t *info,
free(dev);
free(dv);
pr_err("imsm does not support consistency policy %s\n",
- map_num(consistency_policies, s->consistency_policy));
+ map_num_s(consistency_policies, s->consistency_policy));
return 0;
}
diff --git a/super0.c b/super0.c
index b79b97a9..61c9ec1d 100644
--- a/super0.c
+++ b/super0.c
@@ -288,7 +288,7 @@ static void export_examine_super0(struct supertype *st)
{
mdp_super_t *sb = st->sb;
- printf("MD_LEVEL=%s\n", map_num(pers, sb->level));
+ printf("MD_LEVEL=%s\n", map_num_s(pers, sb->level));
printf("MD_DEVICES=%d\n", sb->raid_disks);
if (sb->minor_version >= 90)
printf("MD_UUID=%08x:%08x:%08x:%08x\n",
diff --git a/super1.c b/super1.c
index a12a5bc8..e3e2f954 100644
--- a/super1.c
+++ b/super1.c
@@ -671,7 +671,7 @@ static void export_examine_super1(struct supertype *st)
int len = 32;
int layout;
- printf("MD_LEVEL=%s\n", map_num(pers, __le32_to_cpu(sb->level)));
+ printf("MD_LEVEL=%s\n", map_num_s(pers, __le32_to_cpu(sb->level)));
printf("MD_DEVICES=%d\n", __le32_to_cpu(sb->raid_disks));
for (i = 0; i < 32; i++)
if (sb->set_name[i] == '\n' || sb->set_name[i] == '\0') {
diff --git a/sysfs.c b/sysfs.c
index 2995713d..0d98a65f 100644
--- a/sysfs.c
+++ b/sysfs.c
@@ -689,7 +689,7 @@ int sysfs_set_array(struct mdinfo *info, int vers)
if (info->array.level < 0)
return 0; /* FIXME */
rv |= sysfs_set_str(info, NULL, "level",
- map_num(pers, info->array.level));
+ map_num_s(pers, info->array.level));
if (info->reshape_active && info->delta_disks != UnSet)
raid_disks -= info->delta_disks;
rv |= sysfs_set_num(info, NULL, "raid_disks", raid_disks);
@@ -724,9 +724,10 @@ int sysfs_set_array(struct mdinfo *info, int vers)
}
if (info->consistency_policy == CONSISTENCY_POLICY_PPL) {
- if (sysfs_set_str(info, NULL, "consistency_policy",
- map_num(consistency_policies,
- info->consistency_policy))) {
+ char *policy = map_num_s(consistency_policies,
+ info->consistency_policy);
+
+ if (sysfs_set_str(info, NULL, "consistency_policy", policy)) {
pr_err("This kernel does not support PPL. Falling back to consistency-policy=resync.\n");
info->consistency_policy = CONSISTENCY_POLICY_RESYNC;
}
--
2.38.1

View File

@ -1,36 +0,0 @@
From 757e55435997e355ee9b03e5d913b5496a3c39a8 Mon Sep 17 00:00:00 2001
From: Mariusz Tkaczyk <mariusz.tkaczyk@intel.com>
Date: Tue, 11 Dec 2018 15:04:07 +0100
Subject: [RHEL7.7 PATCH 11/24] policy.c: Fix for compiler error
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
After cd72f9d(policy: support devices with multiple paths.) compilation
on old compilers fails because "p may be used uninitialized
in this function".
Initialize it with NULL to prevent this.
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
policy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/policy.c b/policy.c
index e3a0671..3c53bd3 100644
--- a/policy.c
+++ b/policy.c
@@ -268,7 +268,7 @@ static int pol_match(struct rule *rule, char **paths, char *type, char **part)
for (; rule; rule = rule->next) {
if (rule->name == rule_path) {
- char *p;
+ char *p = NULL;
int i;
if (pathok == 0)
pathok = -1;
--
2.7.5

View File

@ -1,95 +0,0 @@
From a4e96fd8f3f0b5416783237c1cb6ee87e7eff23d Mon Sep 17 00:00:00 2001
From: Mariusz Tkaczyk <mariusz.tkaczyk@intel.com>
Date: Fri, 8 Feb 2019 11:07:10 +0100
Subject: [RHEL7.7 PATCH 12/24] imsm: finish recovery when drive with rebuild
fails
Commit d7a1fda2769b ("imsm: update metadata correctly while raid10 double
degradation") resolves main Imsm double degradation problems but it
omits one case. Now metadata hangs in the rebuilding state if the drive
under rebuild is removed during recovery from double degradation.
The root cause of this problem is comparing new map_state with current
and if they both are degraded assuming that nothing new happens.
Don't rely on map states, just check if device is failed. If the drive
under rebuild fails then finish migration, in other cases update map
state only (second fail means that destination map state can't be normal).
To avoid problems with reassembling move end_migration (called after
double degradation successful recovery) after check if recovery really
finished, for details see (7ce057018 "imsm: fix: rebuild does not
continue after reboot").
Remove redundant code responsible for finishing rebuild process. Function
end_migration do exactly the same. Set last_checkpoint to 0, to prepare
it for the next rebuild.
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
super-intel.c | 26 +++++++++++---------------
1 file changed, 11 insertions(+), 15 deletions(-)
diff --git a/super-intel.c b/super-intel.c
index d2035cc..38a1b6c 100644
--- a/super-intel.c
+++ b/super-intel.c
@@ -8560,26 +8560,22 @@ static void imsm_set_disk(struct active_array *a, int n, int state)
}
if (is_rebuilding(dev)) {
dprintf_cont("while rebuilding ");
- if (map->map_state != map_state) {
- dprintf_cont("map state change ");
+ if (state & DS_FAULTY) {
+ dprintf_cont("removing failed drive ");
if (n == map->failed_disk_num) {
dprintf_cont("end migration");
end_migration(dev, super, map_state);
+ a->last_checkpoint = 0;
} else {
- dprintf_cont("raid10 double degradation, map state change");
+ dprintf_cont("fail detected during rebuild, changing map state");
map->map_state = map_state;
}
super->updates_pending++;
- } else if (!rebuild_done)
- break;
- else if (n == map->failed_disk_num) {
- /* r10 double degraded to degraded transition */
- dprintf_cont("raid10 double degradation end migration");
- end_migration(dev, super, map_state);
- a->last_checkpoint = 0;
- super->updates_pending++;
}
+ if (!rebuild_done)
+ break;
+
/* check if recovery is really finished */
for (mdi = a->info.devs; mdi ; mdi = mdi->next)
if (mdi->recovery_start != MaxSector) {
@@ -8588,7 +8584,7 @@ static void imsm_set_disk(struct active_array *a, int n, int state)
}
if (recovery_not_finished) {
dprintf_cont("\n");
- dprintf_cont("Rebuild has not finished yet, map state changes only if raid10 double degradation happens");
+ dprintf_cont("Rebuild has not finished yet");
if (a->last_checkpoint < mdi->recovery_start) {
a->last_checkpoint =
mdi->recovery_start;
@@ -8598,9 +8594,9 @@ static void imsm_set_disk(struct active_array *a, int n, int state)
}
dprintf_cont(" Rebuild done, still degraded");
- dev->vol.migr_state = 0;
- set_migr_type(dev, 0);
- dev->vol.curr_migr_unit = 0;
+ end_migration(dev, super, map_state);
+ a->last_checkpoint = 0;
+ super->updates_pending++;
for (i = 0; i < map->num_members; i++) {
int idx = get_imsm_ord_tbl_ent(dev, i, MAP_0);
--
2.7.5

View File

@ -1,322 +0,0 @@
From 9f4218274cd4a1e1f356a1617f9a1d09960cf255 Mon Sep 17 00:00:00 2001
From: Pawel Baldysiak <pawel.baldysiak@intel.com>
Date: Mon, 28 Jan 2019 17:10:41 +0100
Subject: [RHEL7.7 PATCH 13/24] imsm: fix reshape for >2TB drives
If reshape is performed on drives larger then 2 TB,
migration checkpoint area that is calculated exeeds 32-bit value.
This checkpoint area is a reserved space threated as backup
during reshape - at the end of the drive, right before metadata.
As a result - wrong space is used and the data that may exists there
is overwritten.
Adding additional field to migration record to track high order 32-bits
of pba of this area. Three other fields that may exceed 32-bit value
for large drives are added as well.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
super-intel.c | 149 +++++++++++++++++++++++++++++++++++++++++-----------------
1 file changed, 107 insertions(+), 42 deletions(-)
diff --git a/super-intel.c b/super-intel.c
index 38a1b6c..1cc7d5f 100644
--- a/super-intel.c
+++ b/super-intel.c
@@ -296,7 +296,7 @@ struct migr_record {
__u32 rec_status; /* Status used to determine how to restart
* migration in case it aborts
* in some fashion */
- __u32 curr_migr_unit; /* 0..numMigrUnits-1 */
+ __u32 curr_migr_unit_lo; /* 0..numMigrUnits-1 */
__u32 family_num; /* Family number of MPB
* containing the RaidDev
* that is migrating */
@@ -306,16 +306,23 @@ struct migr_record {
__u32 dest_depth_per_unit; /* Num member blocks each destMap
* member disk
* advances per unit-of-operation */
- __u32 ckpt_area_pba; /* Pba of first block of ckpt copy area */
- __u32 dest_1st_member_lba; /* First member lba on first
- * stripe of destination */
- __u32 num_migr_units; /* Total num migration units-of-op */
+ __u32 ckpt_area_pba_lo; /* Pba of first block of ckpt copy area */
+ __u32 dest_1st_member_lba_lo; /* First member lba on first
+ * stripe of destination */
+ __u32 num_migr_units_lo; /* Total num migration units-of-op */
__u32 post_migr_vol_cap; /* Size of volume after
* migration completes */
__u32 post_migr_vol_cap_hi; /* Expansion space for LBA64 */
__u32 ckpt_read_disk_num; /* Which member disk in destSubMap[0] the
* migration ckpt record was read from
* (for recovered migrations) */
+ __u32 curr_migr_unit_hi; /* 0..numMigrUnits-1 high order 32 bits */
+ __u32 ckpt_area_pba_hi; /* Pba of first block of ckpt copy area
+ * high order 32 bits */
+ __u32 dest_1st_member_lba_hi; /* First member lba on first stripe of
+ * destination - high order 32 bits */
+ __u32 num_migr_units_hi; /* Total num migration units-of-op
+ * high order 32 bits */
} __attribute__ ((__packed__));
struct md_list {
@@ -1208,6 +1215,38 @@ static unsigned long long imsm_dev_size(struct imsm_dev *dev)
return join_u32(dev->size_low, dev->size_high);
}
+static unsigned long long migr_chkp_area_pba(struct migr_record *migr_rec)
+{
+ if (migr_rec == NULL)
+ return 0;
+ return join_u32(migr_rec->ckpt_area_pba_lo,
+ migr_rec->ckpt_area_pba_hi);
+}
+
+static unsigned long long current_migr_unit(struct migr_record *migr_rec)
+{
+ if (migr_rec == NULL)
+ return 0;
+ return join_u32(migr_rec->curr_migr_unit_lo,
+ migr_rec->curr_migr_unit_hi);
+}
+
+static unsigned long long migr_dest_1st_member_lba(struct migr_record *migr_rec)
+{
+ if (migr_rec == NULL)
+ return 0;
+ return join_u32(migr_rec->dest_1st_member_lba_lo,
+ migr_rec->dest_1st_member_lba_hi);
+}
+
+static unsigned long long get_num_migr_units(struct migr_record *migr_rec)
+{
+ if (migr_rec == NULL)
+ return 0;
+ return join_u32(migr_rec->num_migr_units_lo,
+ migr_rec->num_migr_units_hi);
+}
+
static void set_total_blocks(struct imsm_disk *disk, unsigned long long n)
{
split_ull(n, &disk->total_blocks_lo, &disk->total_blocks_hi);
@@ -1233,6 +1272,33 @@ static void set_imsm_dev_size(struct imsm_dev *dev, unsigned long long n)
split_ull(n, &dev->size_low, &dev->size_high);
}
+static void set_migr_chkp_area_pba(struct migr_record *migr_rec,
+ unsigned long long n)
+{
+ split_ull(n, &migr_rec->ckpt_area_pba_lo, &migr_rec->ckpt_area_pba_hi);
+}
+
+static void set_current_migr_unit(struct migr_record *migr_rec,
+ unsigned long long n)
+{
+ split_ull(n, &migr_rec->curr_migr_unit_lo,
+ &migr_rec->curr_migr_unit_hi);
+}
+
+static void set_migr_dest_1st_member_lba(struct migr_record *migr_rec,
+ unsigned long long n)
+{
+ split_ull(n, &migr_rec->dest_1st_member_lba_lo,
+ &migr_rec->dest_1st_member_lba_hi);
+}
+
+static void set_num_migr_units(struct migr_record *migr_rec,
+ unsigned long long n)
+{
+ split_ull(n, &migr_rec->num_migr_units_lo,
+ &migr_rec->num_migr_units_hi);
+}
+
static unsigned long long per_dev_array_size(struct imsm_map *map)
{
unsigned long long array_size = 0;
@@ -1629,12 +1695,14 @@ void convert_to_4k_imsm_migr_rec(struct intel_super *super)
struct migr_record *migr_rec = super->migr_rec;
migr_rec->blocks_per_unit /= IMSM_4K_DIV;
- migr_rec->ckpt_area_pba /= IMSM_4K_DIV;
- migr_rec->dest_1st_member_lba /= IMSM_4K_DIV;
migr_rec->dest_depth_per_unit /= IMSM_4K_DIV;
split_ull((join_u32(migr_rec->post_migr_vol_cap,
migr_rec->post_migr_vol_cap_hi) / IMSM_4K_DIV),
&migr_rec->post_migr_vol_cap, &migr_rec->post_migr_vol_cap_hi);
+ set_migr_chkp_area_pba(migr_rec,
+ migr_chkp_area_pba(migr_rec) / IMSM_4K_DIV);
+ set_migr_dest_1st_member_lba(migr_rec,
+ migr_dest_1st_member_lba(migr_rec) / IMSM_4K_DIV);
}
void convert_to_4k_imsm_disk(struct imsm_disk *disk)
@@ -1727,8 +1795,8 @@ void examine_migr_rec_imsm(struct intel_super *super)
printf("Normal\n");
else
printf("Contains Data\n");
- printf(" Current Unit : %u\n",
- __le32_to_cpu(migr_rec->curr_migr_unit));
+ printf(" Current Unit : %llu\n",
+ current_migr_unit(migr_rec));
printf(" Family : %u\n",
__le32_to_cpu(migr_rec->family_num));
printf(" Ascending : %u\n",
@@ -1737,16 +1805,15 @@ void examine_migr_rec_imsm(struct intel_super *super)
__le32_to_cpu(migr_rec->blocks_per_unit));
printf(" Dest. Depth Per Unit : %u\n",
__le32_to_cpu(migr_rec->dest_depth_per_unit));
- printf(" Checkpoint Area pba : %u\n",
- __le32_to_cpu(migr_rec->ckpt_area_pba));
- printf(" First member lba : %u\n",
- __le32_to_cpu(migr_rec->dest_1st_member_lba));
- printf(" Total Number of Units : %u\n",
- __le32_to_cpu(migr_rec->num_migr_units));
- printf(" Size of volume : %u\n",
- __le32_to_cpu(migr_rec->post_migr_vol_cap));
- printf(" Expansion space for LBA64 : %u\n",
- __le32_to_cpu(migr_rec->post_migr_vol_cap_hi));
+ printf(" Checkpoint Area pba : %llu\n",
+ migr_chkp_area_pba(migr_rec));
+ printf(" First member lba : %llu\n",
+ migr_dest_1st_member_lba(migr_rec));
+ printf(" Total Number of Units : %llu\n",
+ get_num_migr_units(migr_rec));
+ printf(" Size of volume : %llu\n",
+ join_u32(migr_rec->post_migr_vol_cap,
+ migr_rec->post_migr_vol_cap_hi));
printf(" Record was read from : %u\n",
__le32_to_cpu(migr_rec->ckpt_read_disk_num));
@@ -1759,13 +1826,15 @@ void convert_from_4k_imsm_migr_rec(struct intel_super *super)
struct migr_record *migr_rec = super->migr_rec;
migr_rec->blocks_per_unit *= IMSM_4K_DIV;
- migr_rec->ckpt_area_pba *= IMSM_4K_DIV;
- migr_rec->dest_1st_member_lba *= IMSM_4K_DIV;
migr_rec->dest_depth_per_unit *= IMSM_4K_DIV;
split_ull((join_u32(migr_rec->post_migr_vol_cap,
migr_rec->post_migr_vol_cap_hi) * IMSM_4K_DIV),
&migr_rec->post_migr_vol_cap,
&migr_rec->post_migr_vol_cap_hi);
+ set_migr_chkp_area_pba(migr_rec,
+ migr_chkp_area_pba(migr_rec) * IMSM_4K_DIV);
+ set_migr_dest_1st_member_lba(migr_rec,
+ migr_dest_1st_member_lba(migr_rec) * IMSM_4K_DIV);
}
void convert_from_4k(struct intel_super *super)
@@ -3096,7 +3165,7 @@ static int imsm_create_metadata_checkpoint_update(
return 0;
}
(*u)->type = update_general_migration_checkpoint;
- (*u)->curr_migr_unit = __le32_to_cpu(super->migr_rec->curr_migr_unit);
+ (*u)->curr_migr_unit = current_migr_unit(super->migr_rec);
dprintf("prepared for %u\n", (*u)->curr_migr_unit);
return update_memory_size;
@@ -3397,13 +3466,13 @@ static void getinfo_super_imsm_volume(struct supertype *st, struct mdinfo *info,
case MIGR_GEN_MIGR: {
__u64 blocks_per_unit = blocks_per_migr_unit(super,
dev);
- __u64 units = __le32_to_cpu(migr_rec->curr_migr_unit);
+ __u64 units = current_migr_unit(migr_rec);
unsigned long long array_blocks;
int used_disks;
if (__le32_to_cpu(migr_rec->ascending_migr) &&
(units <
- (__le32_to_cpu(migr_rec->num_migr_units)-1)) &&
+ (get_num_migr_units(migr_rec)-1)) &&
(super->migr_rec->rec_status ==
__cpu_to_le32(UNIT_SRC_IN_CP_AREA)))
units++;
@@ -10697,7 +10766,7 @@ void init_migr_record_imsm(struct supertype *st, struct imsm_dev *dev,
if (array_blocks % __le32_to_cpu(migr_rec->blocks_per_unit))
num_migr_units++;
- migr_rec->num_migr_units = __cpu_to_le32(num_migr_units);
+ set_num_migr_units(migr_rec, num_migr_units);
migr_rec->post_migr_vol_cap = dev->size_low;
migr_rec->post_migr_vol_cap_hi = dev->size_high;
@@ -10714,7 +10783,7 @@ void init_migr_record_imsm(struct supertype *st, struct imsm_dev *dev,
min_dev_sectors = dev_sectors;
close(fd);
}
- migr_rec->ckpt_area_pba = __cpu_to_le32(min_dev_sectors -
+ set_migr_chkp_area_pba(migr_rec, min_dev_sectors -
RAID_DISK_RESERVED_BLOCKS_IMSM_HI);
write_imsm_migr_rec(st);
@@ -10765,8 +10834,7 @@ int save_backup_imsm(struct supertype *st,
start = info->reshape_progress * 512;
for (i = 0; i < new_disks; i++) {
- target_offsets[i] = (unsigned long long)
- __le32_to_cpu(super->migr_rec->ckpt_area_pba) * 512;
+ target_offsets[i] = migr_chkp_area_pba(super->migr_rec) * 512;
/* move back copy area adderss, it will be moved forward
* in restore_stripes() using start input variable
*/
@@ -10845,12 +10913,11 @@ int save_checkpoint_imsm(struct supertype *st, struct mdinfo *info, int state)
if (info->reshape_progress % blocks_per_unit)
curr_migr_unit++;
- super->migr_rec->curr_migr_unit =
- __cpu_to_le32(curr_migr_unit);
+ set_current_migr_unit(super->migr_rec, curr_migr_unit);
super->migr_rec->rec_status = __cpu_to_le32(state);
- super->migr_rec->dest_1st_member_lba =
- __cpu_to_le32(curr_migr_unit *
- __le32_to_cpu(super->migr_rec->dest_depth_per_unit));
+ set_migr_dest_1st_member_lba(super->migr_rec,
+ super->migr_rec->dest_depth_per_unit * curr_migr_unit);
+
if (write_imsm_migr_rec(st) < 0) {
dprintf("imsm: Cannot write migration record outside backup area\n");
return 1;
@@ -10884,8 +10951,8 @@ int recover_backup_imsm(struct supertype *st, struct mdinfo *info)
char *buf = NULL;
int retval = 1;
unsigned int sector_size = super->sector_size;
- unsigned long curr_migr_unit = __le32_to_cpu(migr_rec->curr_migr_unit);
- unsigned long num_migr_units = __le32_to_cpu(migr_rec->num_migr_units);
+ unsigned long curr_migr_unit = current_migr_unit(migr_rec);
+ unsigned long num_migr_units = get_num_migr_units(migr_rec);
char buffer[20];
int skipped_disks = 0;
@@ -10912,11 +10979,9 @@ int recover_backup_imsm(struct supertype *st, struct mdinfo *info)
map_dest = get_imsm_map(id->dev, MAP_0);
new_disks = map_dest->num_members;
- read_offset = (unsigned long long)
- __le32_to_cpu(migr_rec->ckpt_area_pba) * 512;
+ read_offset = migr_chkp_area_pba(migr_rec) * 512;
- write_offset = ((unsigned long long)
- __le32_to_cpu(migr_rec->dest_1st_member_lba) +
+ write_offset = (migr_dest_1st_member_lba(migr_rec) +
pba_of_lba0(map_dest)) * 512;
unit_len = __le32_to_cpu(migr_rec->dest_depth_per_unit) * 512;
@@ -12019,12 +12084,12 @@ static int imsm_manage_reshape(
max_position = sra->component_size * ndata;
source_layout = imsm_level_to_layout(map_src->raid_level);
- while (__le32_to_cpu(migr_rec->curr_migr_unit) <
- __le32_to_cpu(migr_rec->num_migr_units)) {
+ while (current_migr_unit(migr_rec) <
+ get_num_migr_units(migr_rec)) {
/* current reshape position [blocks] */
unsigned long long current_position =
__le32_to_cpu(migr_rec->blocks_per_unit)
- * __le32_to_cpu(migr_rec->curr_migr_unit);
+ * current_migr_unit(migr_rec);
unsigned long long border;
/* Check that array hasn't become failed.
--
2.7.5

View File

@ -0,0 +1,122 @@
From 1066ab83dbe9a4cc20f7db44a40aa2cbb9d5eed6 Mon Sep 17 00:00:00 2001
From: Lukasz Florczak <lukasz.florczak@linux.intel.com>
Date: Fri, 13 May 2022 09:19:42 +0200
Subject: [PATCH 13/83] mdmon: Stop parsing duplicate options
Introduce new function is_duplicate_opt() to check if given option
was already used and prevent setting it again along with an error
message.
Move parsing above in_initrd() check to be able to detect --offroot
option duplicates.
Now help option is executed after parsing to prevent executing commands
like: 'mdmon --help --ndlksnlksajndfjksndafasj'.
Signed-off-by: Lukasz Florczak <lukasz.florczak@linux.intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
mdmon.c | 44 +++++++++++++++++++++++++++++++++++---------
1 file changed, 35 insertions(+), 9 deletions(-)
diff --git a/mdmon.c b/mdmon.c
index 5570574b..c057da63 100644
--- a/mdmon.c
+++ b/mdmon.c
@@ -288,6 +288,15 @@ void usage(void)
exit(2);
}
+static bool is_duplicate_opt(const int opt, const int set_val, const char *long_name)
+{
+ if (opt == set_val) {
+ pr_err("--%s option duplicated!\n", long_name);
+ return true;
+ }
+ return false;
+}
+
static int mdmon(char *devnm, int must_fork, int takeover);
int main(int argc, char *argv[])
@@ -299,6 +308,7 @@ int main(int argc, char *argv[])
int all = 0;
int takeover = 0;
int dofork = 1;
+ bool help = false;
static struct option options[] = {
{"all", 0, NULL, 'a'},
{"takeover", 0, NULL, 't'},
@@ -308,37 +318,50 @@ int main(int argc, char *argv[])
{NULL, 0, NULL, 0}
};
- if (in_initrd()) {
- /*
- * set first char of argv[0] to @. This is used by
- * systemd to signal that the task was launched from
- * initrd/initramfs and should be preserved during shutdown
- */
- argv[0][0] = '@';
- }
-
while ((opt = getopt_long(argc, argv, "thaF", options, NULL)) != -1) {
switch (opt) {
case 'a':
+ if (is_duplicate_opt(all, 1, "all"))
+ exit(1);
container_name = argv[optind-1];
all = 1;
break;
case 't':
+ if (is_duplicate_opt(takeover, 1, "takeover"))
+ exit(1);
takeover = 1;
break;
case 'F':
+ if (is_duplicate_opt(dofork, 0, "foreground"))
+ exit(1);
dofork = 0;
break;
case OffRootOpt:
+ if (is_duplicate_opt(argv[0][0], '@', "offroot"))
+ exit(1);
argv[0][0] = '@';
break;
case 'h':
+ if (is_duplicate_opt(help, true, "help"))
+ exit(1);
+ help = true;
+ break;
default:
usage();
break;
}
}
+
+ if (in_initrd()) {
+ /*
+ * set first char of argv[0] to @. This is used by
+ * systemd to signal that the task was launched from
+ * initrd/initramfs and should be preserved during shutdown
+ */
+ argv[0][0] = '@';
+ }
+
if (all == 0 && container_name == NULL) {
if (argv[optind])
container_name = argv[optind];
@@ -353,6 +376,9 @@ int main(int argc, char *argv[])
if (strcmp(container_name, "/proc/mdstat") == 0)
all = 1;
+ if (help)
+ usage();
+
if (all) {
struct mdstat_ent *mdstat, *e;
int container_len = strlen(container_name);
--
2.38.1

View File

@ -1,101 +0,0 @@
From ebf3be9931f31df54df52b1821479e6a80a4d9c6 Mon Sep 17 00:00:00 2001
From: Dimitri John Ledkov <xnox@ubuntu.com>
Date: Tue, 15 Jan 2019 19:08:37 +0000
Subject: [RHEL7.7 PATCH 14/24] Fix spelling typos.
Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Assemble.c | 2 +-
Create.c | 2 +-
Grow.c | 6 +++---
super-ddf.c | 2 +-
super-intel.c | 2 +-
5 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/Assemble.c b/Assemble.c
index 9f75c68..9f050c1 100644
--- a/Assemble.c
+++ b/Assemble.c
@@ -879,7 +879,7 @@ static int force_array(struct mdinfo *content,
current_events = devices[chosen_drive].i.events;
add_another:
if (c->verbose >= 0)
- pr_err("forcing event count in %s(%d) from %d upto %d\n",
+ pr_err("forcing event count in %s(%d) from %d up to %d\n",
devices[chosen_drive].devname,
devices[chosen_drive].i.disk.raid_disk,
(int)(devices[chosen_drive].i.events),
diff --git a/Create.c b/Create.c
index 04b1dfc..6f1b228 100644
--- a/Create.c
+++ b/Create.c
@@ -823,7 +823,7 @@ int Create(struct supertype *st, char *mddev,
}
bitmap_fd = open(s->bitmap_file, O_RDWR);
if (bitmap_fd < 0) {
- pr_err("weird: %s cannot be openned\n",
+ pr_err("weird: %s cannot be opened\n",
s->bitmap_file);
goto abort_locked;
}
diff --git a/Grow.c b/Grow.c
index 363b209..6d32661 100644
--- a/Grow.c
+++ b/Grow.c
@@ -446,7 +446,7 @@ int Grow_addbitmap(char *devname, int fd, struct context *c, struct shape *s)
if (offset_setable) {
st->ss->getinfo_super(st, mdi, NULL);
if (sysfs_init(mdi, fd, NULL)) {
- pr_err("failed to intialize sysfs.\n");
+ pr_err("failed to initialize sysfs.\n");
free(mdi);
}
rv = sysfs_set_num_signed(mdi, NULL, "bitmap/location",
@@ -2178,7 +2178,7 @@ size_change_error:
memset(&info, 0, sizeof(info));
info.array = array;
if (sysfs_init(&info, fd, NULL)) {
- pr_err("failed to intialize sysfs.\n");
+ pr_err("failed to initialize sysfs.\n");
rv = 1;
goto release;
}
@@ -2903,7 +2903,7 @@ static int impose_level(int fd, int level, char *devname, int verbose)
struct mdinfo info;
if (sysfs_init(&info, fd, NULL)) {
- pr_err("failed to intialize sysfs.\n");
+ pr_err("failed to initialize sysfs.\n");
return 1;
}
diff --git a/super-ddf.c b/super-ddf.c
index 618542c..c095e8a 100644
--- a/super-ddf.c
+++ b/super-ddf.c
@@ -1900,7 +1900,7 @@ static struct vd_config *find_vdcr(struct ddf_super *ddf, unsigned int inst,
return conf;
}
bad:
- pr_err("Could't find disk %d in array %u\n", n, inst);
+ pr_err("Couldn't find disk %d in array %u\n", n, inst);
return NULL;
}
diff --git a/super-intel.c b/super-intel.c
index 1cc7d5f..c399433 100644
--- a/super-intel.c
+++ b/super-intel.c
@@ -10034,7 +10034,7 @@ static void imsm_process_update(struct supertype *st,
break;
}
default:
- pr_err("error: unsuported process update type:(type: %d)\n", type);
+ pr_err("error: unsupported process update type:(type: %d)\n", type);
}
}
--
2.7.5

View File

@ -0,0 +1,41 @@
From 20e114e334ed6ed3280c37a9a08fb95578393d1a Mon Sep 17 00:00:00 2001
From: Mateusz Kusiak <mateusz.kusiak@intel.com>
Date: Thu, 19 May 2022 09:16:08 +0200
Subject: [PATCH 14/83] Grow: block -n on external volumes.
Performing --raid-devices on external metadata volume should be blocked
as it causes unwanted behaviour.
Eg. Performing
mdadm -G /dev/md/volume -l10 -n4
on r0_d2 inside 4 disk container, returns
mdadm: Need 2 spares to avoid degraded array, only have 0.
Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Grow.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/Grow.c b/Grow.c
index 8a242b0f..f6efbc48 100644
--- a/Grow.c
+++ b/Grow.c
@@ -1892,6 +1892,14 @@ int Grow_reshape(char *devname, int fd,
if (retval) {
pr_err("Cannot read superblock for %s\n", devname);
+ close(cfd);
+ free(subarray);
+ return 1;
+ }
+
+ if (s->raiddisks && subarray) {
+ pr_err("--raid-devices operation can be performed on a container only\n");
+ close(cfd);
free(subarray);
return 1;
}
--
2.38.1

View File

@ -1,46 +0,0 @@
From e3615ecb5b6ad8eb408296878aad5628e0e27166 Mon Sep 17 00:00:00 2001
From: Coly Li <colyli@suse.de>
Date: Tue, 12 Feb 2019 12:53:18 +0800
Subject: [RHEL7.7 PATCH 15/24] Detail.c: do not skip first character when
calling xstrdup in Detail()
'Commit b9c9bd9bacaa ("Detail: ensure --export names are acceptable as
shell variables")' duplicates mdi->sys_name to sysdev string by,
char *sysdev = xstrdup(mdi->sys_name + 1);
which skips the first character of mdi->sys_name. Then when running
mdadm --detail <md device> --export, the output looks like,
MD_DEVICE_ev_sda2_ROLE=1
MD_DEVICE_ev_sda2_DEV=/dev/sda2
The first character of md device (between MD_DEVICE and _ROLE/_DEV)
is dropped. The expected output should be,
MD_DEVICE_dev_sda2_ROLE=1
MD_DEVICE_dev_sda2_DEV=/dev/sda2
This patch removes the '+ 1' from calling xstrdup() in Detail(), which
gets the dropped first character back.
Reported-by: Arvin Schnell <aschnell@suse.com>
Fixes: b9c9bd9bacaa ("Detail: ensure --export names are acceptable as 4 shell variables")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Detail.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Detail.c b/Detail.c
index b3e857a..20ea03a 100644
--- a/Detail.c
+++ b/Detail.c
@@ -284,7 +284,7 @@ int Detail(char *dev, struct context *c)
struct mdinfo *mdi;
for (mdi = sra->devs; mdi; mdi = mdi->next) {
char *path;
- char *sysdev = xstrdup(mdi->sys_name + 1);
+ char *sysdev = xstrdup(mdi->sys_name);
char *cp;
path = map_dev(mdi->disk.major,
--
2.7.5

View File

@ -0,0 +1,90 @@
From de064c93e3819d72720e4fba6575265ba10e1553 Mon Sep 17 00:00:00 2001
From: Mateusz Grzonka <mateusz.grzonka@intel.com>
Date: Mon, 13 Jun 2022 12:11:25 +0200
Subject: [PATCH 15/83] Incremental: Fix possible memory and resource leaks
map allocated through map_by_uuid() is not freed if mdfd is invalid.
In addition mdfd is not closed, and mdinfo list is not freed too.
Signed-off-by: Mateusz Grzonka <mateusz.grzonka@intel.com>
Change-Id: I25e726f0e2502cf7e8ce80c2bd7944b3b1e2b9dc
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Incremental.c | 32 +++++++++++++++++++++++---------
1 file changed, 23 insertions(+), 9 deletions(-)
diff --git a/Incremental.c b/Incremental.c
index a57fc323..4d0cd9d6 100644
--- a/Incremental.c
+++ b/Incremental.c
@@ -1499,7 +1499,7 @@ static int Incremental_container(struct supertype *st, char *devname,
return 0;
}
for (ra = list ; ra ; ra = ra->next) {
- int mdfd;
+ int mdfd = -1;
char chosen_name[1024];
struct map_ent *mp;
struct mddev_ident *match = NULL;
@@ -1514,6 +1514,12 @@ static int Incremental_container(struct supertype *st, char *devname,
if (mp) {
mdfd = open_dev(mp->devnm);
+ if (!is_fd_valid(mdfd)) {
+ pr_err("failed to open %s: %s.\n",
+ mp->devnm, strerror(errno));
+ rv = 2;
+ goto release;
+ }
if (mp->path)
strcpy(chosen_name, mp->path);
else
@@ -1573,21 +1579,25 @@ static int Incremental_container(struct supertype *st, char *devname,
c->autof,
trustworthy,
chosen_name, 0);
+
+ if (!is_fd_valid(mdfd)) {
+ pr_err("create_mddev failed with chosen name %s: %s.\n",
+ chosen_name, strerror(errno));
+ rv = 2;
+ goto release;
+ }
}
- if (only && (!mp || strcmp(mp->devnm, only) != 0))
- continue;
- if (mdfd < 0) {
- pr_err("failed to open %s: %s.\n",
- chosen_name, strerror(errno));
- return 2;
+ if (only && (!mp || strcmp(mp->devnm, only) != 0)) {
+ close_fd(&mdfd);
+ continue;
}
assemble_container_content(st, mdfd, ra, c,
chosen_name, &result);
map_free(map);
map = NULL;
- close(mdfd);
+ close_fd(&mdfd);
}
if (c->export && result) {
char sep = '=';
@@ -1610,7 +1620,11 @@ static int Incremental_container(struct supertype *st, char *devname,
}
printf("\n");
}
- return 0;
+
+release:
+ map_free(map);
+ sysfs_free(list);
+ return rv;
}
static void run_udisks(char *arg1, char *arg2)
--
2.38.1

View File

@ -1,70 +0,0 @@
From cab114c5ca870e5f1b57fb2602cd9a038271c2e0 Mon Sep 17 00:00:00 2001
From: Corey Hickey <bugfood-c@fatooh.org>
Date: Mon, 11 Feb 2019 17:18:38 -0800
Subject: [RHEL7.7 PATCH 16/24] Fix reshape for decreasing data offset
...when not changing the number of disks.
This patch needs context to explain. These are the relevant parts of
the original code (condensed and annotated):
if (dir > 0) {
/* Increase data offset (reshape backwards) */
if (data_offset < sd->data_offset + min) {
pr_err("--data-offset too small on %s\n",
dn);
goto release;
}
} else {
/* Decrease data offset (reshape forwards) */
if (data_offset < sd->data_offset - min) {
pr_err("--data-offset too small on %s\n",
dn);
goto release;
}
}
When this code is reached, mdadm has already decided on a reshape
direction. When increasing the data offset, the reshape runs backwards
(dir==1); when decreasing the data offset, the reshape runs forwards
(dir==-1).
The conditional within the backwards reshape is correct: the requested
offset must be larger than the old offset plus a minimum delta; thus the
reshape has room to work.
For the forwards reshape, the requested offset needs to be smaller than
the old offset minus a minimum delta; to do this correctly, the
comparison must be reversed.
Also update the error message.
Note: I have tested this change on a RAID 5 on Linux 4.18.0 and verified
that there were no errors from the kernel and that the device data
remained intact. I do not know if there are considerations for different
RAID levels.
Signed-off-by: Corey Hickey <bugfood-c@fatooh.org>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Grow.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Grow.c b/Grow.c
index 6d32661..764374f 100644
--- a/Grow.c
+++ b/Grow.c
@@ -2613,8 +2613,8 @@ static int set_new_data_offset(struct mdinfo *sra, struct supertype *st,
goto release;
}
if (data_offset != INVALID_SECTORS &&
- data_offset < sd->data_offset - min) {
- pr_err("--data-offset too small on %s\n",
+ data_offset > sd->data_offset - min) {
+ pr_err("--data-offset too large on %s\n",
dn);
goto release;
}
--
2.7.5

View File

@ -0,0 +1,98 @@
From e702f392959d1c2ad2089e595b52235ed97b4e18 Mon Sep 17 00:00:00 2001
From: Kinga Tanska <kinga.tanska@intel.com>
Date: Mon, 6 Jun 2022 12:32:12 +0200
Subject: [PATCH 16/83] Mdmonitor: Fix segfault
Mdadm with "--monitor" parameter requires md device
as an argument to be monitored. If given argument is
not a md device, error shall be returned. Previously
it was not checked and invalid argument caused
segmentation fault. This commit adds checking
that devices passed to mdmonitor are md devices.
Signed-off-by: Kinga Tanska <kinga.tanska@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Monitor.c | 10 +++++++++-
mdadm.h | 1 +
mdopen.c | 17 +++++++++++++++++
3 files changed, 27 insertions(+), 1 deletion(-)
diff --git a/Monitor.c b/Monitor.c
index c0ab5412..4e5802b5 100644
--- a/Monitor.c
+++ b/Monitor.c
@@ -182,6 +182,7 @@ int Monitor(struct mddev_dev *devlist,
continue;
if (strcasecmp(mdlist->devname, "<ignore>") == 0)
continue;
+
st = xcalloc(1, sizeof *st);
if (mdlist->devname[0] == '/')
st->devname = xstrdup(mdlist->devname);
@@ -190,6 +191,8 @@ int Monitor(struct mddev_dev *devlist,
strcpy(strcpy(st->devname, "/dev/md/"),
mdlist->devname);
}
+ if (!is_mddev(mdlist->devname))
+ return 1;
st->next = statelist;
st->devnm[0] = 0;
st->percent = RESYNC_UNKNOWN;
@@ -203,7 +206,12 @@ int Monitor(struct mddev_dev *devlist,
struct mddev_dev *dv;
for (dv = devlist; dv; dv = dv->next) {
- struct state *st = xcalloc(1, sizeof *st);
+ struct state *st;
+
+ if (!is_mddev(dv->devname))
+ return 1;
+
+ st = xcalloc(1, sizeof *st);
mdlist = conf_get_ident(dv->devname);
st->devname = xstrdup(dv->devname);
st->next = statelist;
diff --git a/mdadm.h b/mdadm.h
index 09915a00..d53df169 100644
--- a/mdadm.h
+++ b/mdadm.h
@@ -1636,6 +1636,7 @@ extern int create_mddev(char *dev, char *name, int autof, int trustworthy,
#define FOREIGN 2
#define METADATA 3
extern int open_mddev(char *dev, int report_errors);
+extern int is_mddev(char *dev);
extern int open_container(int fd);
extern int metadata_container_matches(char *metadata, char *devnm);
extern int metadata_subdev_matches(char *metadata, char *devnm);
diff --git a/mdopen.c b/mdopen.c
index 245be537..d18c9319 100644
--- a/mdopen.c
+++ b/mdopen.c
@@ -475,6 +475,23 @@ int open_mddev(char *dev, int report_errors)
return mdfd;
}
+/**
+ * is_mddev() - check that file name passed is an md device.
+ * @dev: file name that has to be checked.
+ * Return: 1 if file passed is an md device, 0 if not.
+ */
+int is_mddev(char *dev)
+{
+ int fd = open_mddev(dev, 1);
+
+ if (fd >= 0) {
+ close(fd);
+ return 1;
+ }
+
+ return 0;
+}
+
char *find_free_devnm(int use_partitions)
{
static char devnm[32];
--
2.38.1

View File

@ -0,0 +1,61 @@
From f5ff2988761625b43eb15555993f2797af29f166 Mon Sep 17 00:00:00 2001
From: Kinga Tanska <kinga.tanska@intel.com>
Date: Mon, 6 Jun 2022 12:32:13 +0200
Subject: [PATCH 17/83] Mdmonitor: Improve logging method
Change logging, and as a result, mdmonitor in verbose
mode will report its configuration.
Signed-off-by: Kinga Tanska <kinga.tanska@intel.com>
Signed-off-by: Oleksandr Shchirskyi <oleksandr.shchirskyi@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Monitor.c | 25 ++++++++++++++-----------
1 file changed, 14 insertions(+), 11 deletions(-)
diff --git a/Monitor.c b/Monitor.c
index 4e5802b5..6ca1ebe5 100644
--- a/Monitor.c
+++ b/Monitor.c
@@ -136,24 +136,27 @@ int Monitor(struct mddev_dev *devlist,
struct mddev_ident *mdlist;
int delay_for_event = c->delay;
- if (!mailaddr) {
+ if (!mailaddr)
mailaddr = conf_get_mailaddr();
- if (mailaddr && ! c->scan)
- pr_err("Monitor using email address \"%s\" from config file\n",
- mailaddr);
- }
- mailfrom = conf_get_mailfrom();
- if (!alert_cmd) {
+ if (!alert_cmd)
alert_cmd = conf_get_program();
- if (alert_cmd && !c->scan)
- pr_err("Monitor using program \"%s\" from config file\n",
- alert_cmd);
- }
+
+ mailfrom = conf_get_mailfrom();
+
if (c->scan && !mailaddr && !alert_cmd && !dosyslog) {
pr_err("No mail address or alert command - not monitoring.\n");
return 1;
}
+
+ if (c->verbose) {
+ pr_err("Monitor is started with delay %ds\n", c->delay);
+ if (mailaddr)
+ pr_err("Monitor using email address %s\n", mailaddr);
+ if (alert_cmd)
+ pr_err("Monitor using program %s\n", alert_cmd);
+ }
+
info.alert_cmd = alert_cmd;
info.mailaddr = mailaddr;
info.mailfrom = mailfrom;
--
2.38.1

View File

@ -1,100 +0,0 @@
From 76b906d2406cdf136f64de77e881eb2d180108d9 Mon Sep 17 00:00:00 2001
From: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Date: Fri, 7 Dec 2018 14:30:09 +0100
Subject: [RHEL7.7 PATCH 17/24] mdadm/tests: add one test case for failfast of
raid1
This creates raid1 device with the failfast option and check all
slaves have the failfast flag. And it does assembling and growing
the raid1 device and check the failfast works fine.
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
tests/05r1-failfast | 74 +++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 74 insertions(+)
create mode 100644 tests/05r1-failfast
diff --git a/tests/05r1-failfast b/tests/05r1-failfast
new file mode 100644
index 0000000..823dd6f
--- /dev/null
+++ b/tests/05r1-failfast
@@ -0,0 +1,74 @@
+
+# create a simple mirror and check failfast flag works
+mdadm -CR $md0 -e1.2 --level=raid1 --failfast -n2 $dev0 $dev1
+check raid1
+if grep -v failfast /sys/block/md0/md/rd*/state > /dev/null
+then
+ die "failfast missing"
+fi
+
+# Removing works with the failfast flag
+mdadm $md0 -f $dev0
+mdadm $md0 -r $dev0
+if grep -v failfast /sys/block/md0/md/rd1/state > /dev/null
+then
+ die "failfast missing"
+fi
+
+# Adding works with the failfast flag
+mdadm $md0 -a --failfast $dev0
+check wait
+if grep -v failfast /sys/block/md0/md/rd0/state > /dev/null
+then
+ die "failfast missing"
+fi
+
+mdadm -S $md0
+
+# Assembling works with the failfast flag
+mdadm -A $md0 $dev0 $dev1
+check raid1
+if grep -v failfast /sys/block/md0/md/rd*/state > /dev/null
+then
+ die "failfast missing"
+fi
+
+# Adding works with the nofailfast flag
+mdadm $md0 -f $dev0
+mdadm $md0 -r $dev0
+mdadm $md0 -a --nofailfast $dev0
+check wait
+if grep failfast /sys/block/md0/md/rd0/state > /dev/null
+then
+ die "failfast should be missing"
+fi
+
+# Assembling with one faulty slave works with the failfast flag
+mdadm $md0 -f $dev0
+mdadm $md0 -r $dev0
+mdadm -S $md0
+mdadm -A $md0 $dev0 $dev1
+check raid1
+mdadm -S $md0
+
+# Spare works with the failfast flag
+mdadm -CR $md0 -e1.2 --level=raid1 --failfast -n2 $dev0 $dev1
+check raid1
+mdadm $md0 -a --failfast $dev2
+check wait
+check spares 1
+if grep -v failfast /sys/block/md0/md/rd*/state > /dev/null
+then
+ die "failfast missing"
+fi
+
+# Grow works with the failfast flag
+mdadm -G $md0 --raid-devices=3
+check wait
+if grep -v failfast /sys/block/md0/md/rd*/state > /dev/null
+then
+ die "failfast missing"
+fi
+mdadm -S $md0
+
+exit 0
--
2.7.5

View File

@ -0,0 +1,73 @@
From 626bc45396c4959f2c4685c2faa7c4f553f4efdf Mon Sep 17 00:00:00 2001
From: Mateusz Grzonka <mateusz.grzonka@intel.com>
Date: Mon, 13 Jun 2022 11:59:34 +0200
Subject: [PATCH 18/83] Fix possible NULL ptr dereferences and memory leaks
In Assemble there was a NULL check for sra variable,
which effectively didn't stop the execution in every case.
That might have resulted in a NULL pointer dereference.
Also in super-ddf, mu variable was set to NULL for some condition,
and then immidiately dereferenced.
Additionally some memory wasn't freed as well.
Signed-off-by: Mateusz Grzonka <mateusz.grzonka@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Assemble.c | 7 ++++++-
super-ddf.c | 9 +++++++--
2 files changed, 13 insertions(+), 3 deletions(-)
diff --git a/Assemble.c b/Assemble.c
index 9eac9ce0..4b213560 100644
--- a/Assemble.c
+++ b/Assemble.c
@@ -1982,7 +1982,12 @@ int assemble_container_content(struct supertype *st, int mdfd,
}
sra = sysfs_read(mdfd, NULL, GET_VERSION|GET_DEVS);
- if (sra == NULL || strcmp(sra->text_version, content->text_version) != 0) {
+ if (sra == NULL) {
+ pr_err("Failed to read sysfs parameters\n");
+ return 1;
+ }
+
+ if (strcmp(sra->text_version, content->text_version) != 0) {
if (content->array.major_version == -1 &&
content->array.minor_version == -2 &&
c->readonly &&
diff --git a/super-ddf.c b/super-ddf.c
index 8cda23a7..abbc8b09 100644
--- a/super-ddf.c
+++ b/super-ddf.c
@@ -5125,13 +5125,16 @@ static struct mdinfo *ddf_activate_spare(struct active_array *a,
*/
vc = find_vdcr(ddf, a->info.container_member, rv->disk.raid_disk,
&n_bvd, &vcl);
- if (vc == NULL)
+ if (vc == NULL) {
+ free(rv);
return NULL;
+ }
mu = xmalloc(sizeof(*mu));
if (posix_memalign(&mu->space, 512, sizeof(struct vcl)) != 0) {
free(mu);
- mu = NULL;
+ free(rv);
+ return NULL;
}
mu->len = ddf->conf_rec_len * 512 * vcl->conf.sec_elmnt_count;
@@ -5161,6 +5164,8 @@ static struct mdinfo *ddf_activate_spare(struct active_array *a,
pr_err("BUG: can't find disk %d (%d/%d)\n",
di->disk.raid_disk,
di->disk.major, di->disk.minor);
+ free(mu);
+ free(rv);
return NULL;
}
vc->phys_refnum[i_prim] = ddf->phys->entries[dl->pdnum].refnum;
--
2.38.1

View File

@ -1,50 +0,0 @@
From 69d084784de196acec8ab703cd1b379af211d624 Mon Sep 17 00:00:00 2001
From: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Date: Fri, 22 Feb 2019 10:15:45 +0100
Subject: [RHEL7.7 PATCH 18/24] mdmon: don't attempt to manage new arrays when
terminating
When mdmon gets a SIGTERM, it stops managing arrays that are clean. If
there is more that one array in the container and one of them is dirty
and the clean one is still present in mdstat, mdmon will treat it as a
new array and start managing it again. This leads to a cycle of
remove_old() / manage_new() calls for the clean array, until the other
one also becomes clean.
Prevent this by not calling manage_new() if sigterm is set. Also, remove
a check for sigterm in manage_new() because the condition will never be
true.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
managemon.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/managemon.c b/managemon.c
index 101231c..29b91ba 100644
--- a/managemon.c
+++ b/managemon.c
@@ -727,9 +727,7 @@ static void manage_new(struct mdstat_ent *mdstat,
dprintf("inst: %s action: %d state: %d\n", inst,
new->action_fd, new->info.state_fd);
- if (sigterm)
- new->info.safe_mode_delay = 1;
- else if (mdi->safe_mode_delay >= 50)
+ if (mdi->safe_mode_delay >= 50)
/* Normal start, mdadm set this. */
new->info.safe_mode_delay = mdi->safe_mode_delay;
else
@@ -803,7 +801,7 @@ void manage(struct mdstat_ent *mdstat, struct supertype *container)
break;
}
}
- if (a == NULL || !a->container)
+ if ((a == NULL || !a->container) && !sigterm)
manage_new(mdstat, container, a);
}
}
--
2.7.5

View File

@ -0,0 +1,301 @@
From 756a15f32338fdf0c562678694bc8991ad6afb90 Mon Sep 17 00:00:00 2001
From: Mateusz Grzonka <mateusz.grzonka@intel.com>
Date: Mon, 13 Jun 2022 12:00:09 +0200
Subject: [PATCH 19/83] imsm: Remove possibility for get_imsm_dev to return
NULL
Returning NULL from get_imsm_dev or __get_imsm_dev will cause segfault.
Guarantee that it never happens.
Signed-off-by: Mateusz Grzonka <mateusz.grzonka@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
super-intel.c | 153 +++++++++++++++++++++++++-------------------------
1 file changed, 78 insertions(+), 75 deletions(-)
diff --git a/super-intel.c b/super-intel.c
index ba3bd41f..3788feb9 100644
--- a/super-intel.c
+++ b/super-intel.c
@@ -851,6 +851,21 @@ static struct disk_info *get_disk_info(struct imsm_update_create_array *update)
return inf;
}
+/**
+ * __get_imsm_dev() - Get device with index from imsm_super.
+ * @mpb: &imsm_super pointer, not NULL.
+ * @index: Device index.
+ *
+ * Function works as non-NULL, aborting in such a case,
+ * when NULL would be returned.
+ *
+ * Device index should be in range 0 up to num_raid_devs.
+ * Function assumes the index was already verified.
+ * Index must be valid, otherwise abort() is called.
+ *
+ * Return: Pointer to corresponding imsm_dev.
+ *
+ */
static struct imsm_dev *__get_imsm_dev(struct imsm_super *mpb, __u8 index)
{
int offset;
@@ -858,30 +873,47 @@ static struct imsm_dev *__get_imsm_dev(struct imsm_super *mpb, __u8 index)
void *_mpb = mpb;
if (index >= mpb->num_raid_devs)
- return NULL;
+ goto error;
/* devices start after all disks */
offset = ((void *) &mpb->disk[mpb->num_disks]) - _mpb;
- for (i = 0; i <= index; i++)
+ for (i = 0; i <= index; i++, offset += sizeof_imsm_dev(_mpb + offset, 0))
if (i == index)
return _mpb + offset;
- else
- offset += sizeof_imsm_dev(_mpb + offset, 0);
-
- return NULL;
+error:
+ pr_err("cannot find imsm_dev with index %u in imsm_super\n", index);
+ abort();
}
+/**
+ * get_imsm_dev() - Get device with index from intel_super.
+ * @super: &intel_super pointer, not NULL.
+ * @index: Device index.
+ *
+ * Function works as non-NULL, aborting in such a case,
+ * when NULL would be returned.
+ *
+ * Device index should be in range 0 up to num_raid_devs.
+ * Function assumes the index was already verified.
+ * Index must be valid, otherwise abort() is called.
+ *
+ * Return: Pointer to corresponding imsm_dev.
+ *
+ */
static struct imsm_dev *get_imsm_dev(struct intel_super *super, __u8 index)
{
struct intel_dev *dv;
if (index >= super->anchor->num_raid_devs)
- return NULL;
+ goto error;
+
for (dv = super->devlist; dv; dv = dv->next)
if (dv->index == index)
return dv->dev;
- return NULL;
+error:
+ pr_err("cannot find imsm_dev with index %u in intel_super\n", index);
+ abort();
}
static inline unsigned long long __le48_to_cpu(const struct bbm_log_block_addr
@@ -4364,8 +4396,7 @@ int check_mpb_migr_compatibility(struct intel_super *super)
for (i = 0; i < super->anchor->num_raid_devs; i++) {
struct imsm_dev *dev_iter = __get_imsm_dev(super->anchor, i);
- if (dev_iter &&
- dev_iter->vol.migr_state == 1 &&
+ if (dev_iter->vol.migr_state == 1 &&
dev_iter->vol.migr_type == MIGR_GEN_MIGR) {
/* This device is migrating */
map0 = get_imsm_map(dev_iter, MAP_0);
@@ -4514,8 +4545,6 @@ static void clear_hi(struct intel_super *super)
}
for (i = 0; i < mpb->num_raid_devs; ++i) {
struct imsm_dev *dev = get_imsm_dev(super, i);
- if (!dev)
- return;
for (n = 0; n < 2; ++n) {
struct imsm_map *map = get_imsm_map(dev, n);
if (!map)
@@ -5836,7 +5865,7 @@ static int add_to_super_imsm_volume(struct supertype *st, mdu_disk_info_t *dk,
struct imsm_dev *_dev = __get_imsm_dev(mpb, 0);
_disk = __get_imsm_disk(mpb, dl->index);
- if (!_dev || !_disk) {
+ if (!_disk) {
pr_err("BUG mpb setup error\n");
return 1;
}
@@ -6171,10 +6200,10 @@ static int write_super_imsm(struct supertype *st, int doclose)
for (i = 0; i < mpb->num_raid_devs; i++) {
struct imsm_dev *dev = __get_imsm_dev(mpb, i);
struct imsm_dev *dev2 = get_imsm_dev(super, i);
- if (dev && dev2) {
- imsm_copy_dev(dev, dev2);
- mpb_size += sizeof_imsm_dev(dev, 0);
- }
+
+ imsm_copy_dev(dev, dev2);
+ mpb_size += sizeof_imsm_dev(dev, 0);
+
if (is_gen_migration(dev2))
clear_migration_record = 0;
}
@@ -9033,29 +9062,26 @@ static int imsm_rebuild_allowed(struct supertype *cont, int dev_idx, int failed)
__u8 state;
dev2 = get_imsm_dev(cont->sb, dev_idx);
- if (dev2) {
- state = imsm_check_degraded(cont->sb, dev2, failed, MAP_0);
- if (state == IMSM_T_STATE_FAILED) {
- map = get_imsm_map(dev2, MAP_0);
- if (!map)
- return 1;
- for (slot = 0; slot < map->num_members; slot++) {
- /*
- * Check if failed disks are deleted from intel
- * disk list or are marked to be deleted
- */
- idx = get_imsm_disk_idx(dev2, slot, MAP_X);
- idisk = get_imsm_dl_disk(cont->sb, idx);
- /*
- * Do not rebuild the array if failed disks
- * from failed sub-array are not removed from
- * container.
- */
- if (idisk &&
- is_failed(&idisk->disk) &&
- (idisk->action != DISK_REMOVE))
- return 0;
- }
+
+ state = imsm_check_degraded(cont->sb, dev2, failed, MAP_0);
+ if (state == IMSM_T_STATE_FAILED) {
+ map = get_imsm_map(dev2, MAP_0);
+ for (slot = 0; slot < map->num_members; slot++) {
+ /*
+ * Check if failed disks are deleted from intel
+ * disk list or are marked to be deleted
+ */
+ idx = get_imsm_disk_idx(dev2, slot, MAP_X);
+ idisk = get_imsm_dl_disk(cont->sb, idx);
+ /*
+ * Do not rebuild the array if failed disks
+ * from failed sub-array are not removed from
+ * container.
+ */
+ if (idisk &&
+ is_failed(&idisk->disk) &&
+ (idisk->action != DISK_REMOVE))
+ return 0;
}
}
return 1;
@@ -10089,7 +10115,6 @@ static void imsm_process_update(struct supertype *st,
int victim = u->dev_idx;
struct active_array *a;
struct intel_dev **dp;
- struct imsm_dev *dev;
/* sanity check that we are not affecting the uuid of
* active arrays, or deleting an active array
@@ -10105,8 +10130,7 @@ static void imsm_process_update(struct supertype *st,
* is active in the container, so checking
* mpb->num_raid_devs is just extra paranoia
*/
- dev = get_imsm_dev(super, victim);
- if (a || !dev || mpb->num_raid_devs == 1) {
+ if (a || mpb->num_raid_devs == 1 || victim >= super->anchor->num_raid_devs) {
dprintf("failed to delete subarray-%d\n", victim);
break;
}
@@ -10140,7 +10164,7 @@ static void imsm_process_update(struct supertype *st,
if (a->info.container_member == target)
break;
dev = get_imsm_dev(super, u->dev_idx);
- if (a || !dev || !check_name(super, name, 1)) {
+ if (a || !check_name(super, name, 1)) {
dprintf("failed to rename subarray-%d\n", target);
break;
}
@@ -10169,10 +10193,6 @@ static void imsm_process_update(struct supertype *st,
struct imsm_update_rwh_policy *u = (void *)update->buf;
int target = u->dev_idx;
struct imsm_dev *dev = get_imsm_dev(super, target);
- if (!dev) {
- dprintf("could not find subarray-%d\n", target);
- break;
- }
if (dev->rwh_policy != u->new_policy) {
dev->rwh_policy = u->new_policy;
@@ -11397,8 +11417,10 @@ static int imsm_create_metadata_update_for_migration(
{
struct intel_super *super = st->sb;
int update_memory_size;
+ int current_chunk_size;
struct imsm_update_reshape_migration *u;
- struct imsm_dev *dev;
+ struct imsm_dev *dev = get_imsm_dev(super, super->current_vol);
+ struct imsm_map *map = get_imsm_map(dev, MAP_0);
int previous_level = -1;
dprintf("(enter) New Level = %i\n", geo->level);
@@ -11415,23 +11437,15 @@ static int imsm_create_metadata_update_for_migration(
u->new_disks[0] = -1;
u->new_chunksize = -1;
- dev = get_imsm_dev(super, u->subdev);
- if (dev) {
- struct imsm_map *map;
+ current_chunk_size = __le16_to_cpu(map->blocks_per_strip) / 2;
- map = get_imsm_map(dev, MAP_0);
- if (map) {
- int current_chunk_size =
- __le16_to_cpu(map->blocks_per_strip) / 2;
-
- if (geo->chunksize != current_chunk_size) {
- u->new_chunksize = geo->chunksize / 1024;
- dprintf("imsm: chunk size change from %i to %i\n",
- current_chunk_size, u->new_chunksize);
- }
- previous_level = map->raid_level;
- }
+ if (geo->chunksize != current_chunk_size) {
+ u->new_chunksize = geo->chunksize / 1024;
+ dprintf("imsm: chunk size change from %i to %i\n",
+ current_chunk_size, u->new_chunksize);
}
+ previous_level = map->raid_level;
+
if (geo->level == 5 && previous_level == 0) {
struct mdinfo *spares = NULL;
@@ -12519,9 +12533,6 @@ static int validate_internal_bitmap_imsm(struct supertype *st)
unsigned long long offset;
struct dl *d;
- if (!dev)
- return -1;
-
if (dev->rwh_policy != RWH_BITMAP)
return 0;
@@ -12567,16 +12578,8 @@ static int add_internal_bitmap_imsm(struct supertype *st, int *chunkp,
return -1;
dev = get_imsm_dev(super, vol_idx);
-
- if (!dev) {
- dprintf("cannot find the device for volume index %d\n",
- vol_idx);
- return -1;
- }
dev->rwh_policy = RWH_BITMAP;
-
*chunkp = calculate_bitmap_chunksize(st, dev);
-
return 0;
}
--
2.38.1

View File

@ -1,58 +0,0 @@
From d2e11da4b7fd0453e942f43e4196dc63b3dbd708 Mon Sep 17 00:00:00 2001
From: Pawel Baldysiak <pawel.baldysiak@intel.com>
Date: Fri, 22 Feb 2019 13:30:27 +0100
Subject: [RHEL7.7 PATCH 19/24] mdmon: wait for previous mdmon to exit during
takeover
Since the patch c76242c5("mdmon: get safe mode delay file descriptor
early"), safe_mode_dalay is set properly by initrd mdmon. But in some
cases with filesystem traffic since the very start of the system, it
might take a while to transit to clean state. Due to fact that new
mdmon does not wait for the old one to exit - it might happen that the
new one switches safe_mode_delay back to seconds, before old one exits.
As the result two mdmons are running concurrently on same array.
Wait for the old mdmon to exit by pinging it with SIGUSR1 signal, just
in case it is sleeping.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
mdmon.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/mdmon.c b/mdmon.c
index 0955fcc..ff985d2 100644
--- a/mdmon.c
+++ b/mdmon.c
@@ -171,6 +171,7 @@ static void try_kill_monitor(pid_t pid, char *devname, int sock)
int fd;
int n;
long fl;
+ int rv;
/* first rule of survival... don't off yourself */
if (pid == getpid())
@@ -201,9 +202,16 @@ static void try_kill_monitor(pid_t pid, char *devname, int sock)
fl &= ~O_NONBLOCK;
fcntl(sock, F_SETFL, fl);
n = read(sock, buf, 100);
- /* Ignore result, it is just the wait that
- * matters
- */
+
+ /* If there is I/O going on it might took some time to get to
+ * clean state. Wait for monitor to exit fully to avoid races.
+ * Ping it with SIGUSR1 in case that it is sleeping */
+ for (n = 0; n < 25; n++) {
+ rv = kill(pid, SIGUSR1);
+ if (rv < 0)
+ break;
+ usleep(200000);
+ }
}
void remove_pidfile(char *devname)
--
2.7.5

View File

@ -1,52 +0,0 @@
From 2b57e4fe041d52ae29866c93a878a11c07223cff Mon Sep 17 00:00:00 2001
From: Pawel Baldysiak <pawel.baldysiak@intel.com>
Date: Fri, 22 Feb 2019 12:56:27 +0100
Subject: [RHEL7.7 PATCH 20/24] Assemble: Fix starting array with initial
reshape checkpoint
If array was stopped during reshape initialization,
there might be a "0" checkpoint recorded in metadata.
If array with such condition (reshape with position 0)
is passed to kernel - it will refuse to start such array.
Treat such array as normal during assemble, Grow_continue() will
reinitialize and start the reshape.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Assemble.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/Assemble.c b/Assemble.c
index 9f050c1..420c7b3 100644
--- a/Assemble.c
+++ b/Assemble.c
@@ -2061,8 +2061,22 @@ int assemble_container_content(struct supertype *st, int mdfd,
spare, &c->backup_file, c->verbose) == 1)
return 1;
- err = sysfs_set_str(content, NULL,
- "array_state", "readonly");
+ if (content->reshape_progress == 0) {
+ /* If reshape progress is 0 - we are assembling the
+ * array that was stopped, before reshape has started.
+ * Array needs to be started as active, Grow_continue()
+ * will start the reshape.
+ */
+ sysfs_set_num(content, NULL, "reshape_position",
+ MaxSector);
+ err = sysfs_set_str(content, NULL,
+ "array_state", "active");
+ sysfs_set_num(content, NULL, "reshape_position", 0);
+ } else {
+ err = sysfs_set_str(content, NULL,
+ "array_state", "readonly");
+ }
+
if (err)
return 1;
--
2.7.5

View File

@ -0,0 +1,85 @@
From 190dc029b141c423e724566cbed5d5afbb10b05a Mon Sep 17 00:00:00 2001
From: Nigel Croxon <ncroxon@redhat.com>
Date: Mon, 18 Apr 2022 13:44:23 -0400
Subject: [PATCH 20/83] Revert "mdadm: fix coredump of mdadm --monitor -r"
This reverts commit 546047688e1c64638f462147c755b58119cabdc8.
The change from commit mdadm: fix coredump of mdadm
--monitor -r broke the printing of the return message when
passing -r to mdadm --manage, the removal of a device from
an array.
If the current code reverts this commit, both issues are
still fixed.
The original problem reported that the fix tried to address
was: The --monitor -r option requires a parameter,
otherwise a null pointer will be manipulated when
converting to integer data, and a core dump will appear.
The original problem was really fixed with:
60815698c0a Refactor parse_num and use it to parse optarg.
Which added a check for NULL in 'optarg' before moving it
to the 'increments' variable.
New issue: When trying to remove a device using the short
argument -r, instead of the long argument --remove, the
output is empty. The problem started when commit
546047688e1c was added.
Steps to Reproduce:
1. create/assemble /dev/md0 device
2. mdadm --manage /dev/md0 -r /dev/vdxx
Actual results:
Nothing, empty output, nothing happens, the device is still
connected to the array.
The output should have stated "mdadm: hot remove failed
for /dev/vdxx: Device or resource busy", if the device was
still active. Or it should remove the device and print
a message:
mdadm: set /dev/vdd faulty in /dev/md0
mdadm: hot removed /dev/vdd from /dev/md0
The following commit should be reverted as it breaks
mdadm --manage -r.
commit 546047688e1c64638f462147c755b58119cabdc8
Author: Wu Guanghao <wuguanghao3@huawei.com>
Date: Mon Aug 16 15:24:51 2021 +0800
mdadm: fix coredump of mdadm --monitor -r
-Nigel
Signed-off-by: Nigel Croxon <ncroxon@redhat.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
ReadMe.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/ReadMe.c b/ReadMe.c
index 8f873c48..bec1be9a 100644
--- a/ReadMe.c
+++ b/ReadMe.c
@@ -81,11 +81,11 @@ char Version[] = "mdadm - v" VERSION " - " VERS_DATE EXTRAVERSION "\n";
* found, it is started.
*/
-char short_options[]="-ABCDEFGIQhVXYWZ:vqbc:i:l:p:m:r:n:x:u:c:d:z:U:N:safRSow1tye:k";
+char short_options[]="-ABCDEFGIQhVXYWZ:vqbc:i:l:p:m:n:x:u:c:d:z:U:N:sarfRSow1tye:k:";
char short_bitmap_options[]=
- "-ABCDEFGIQhVXYWZ:vqb:c:i:l:p:m:r:n:x:u:c:d:z:U:N:sarfRSow1tye:k:";
+ "-ABCDEFGIQhVXYWZ:vqb:c:i:l:p:m:n:x:u:c:d:z:U:N:sarfRSow1tye:k:";
char short_bitmap_auto_options[]=
- "-ABCDEFGIQhVXYWZ:vqb:c:i:l:p:m:r:n:x:u:c:d:z:U:N:sa:rfRSow1tye:k:";
+ "-ABCDEFGIQhVXYWZ:vqb:c:i:l:p:m:n:x:u:c:d:z:U:N:sa:rfRSow1tye:k:";
struct option long_options[] = {
{"manage", 0, 0, ManageOpt},
--
2.38.1

View File

@ -1,59 +0,0 @@
From 227aeaa872d4898273cf87a4253898823d556c43 Mon Sep 17 00:00:00 2001
From: Corey Hickey <bugfood-c@fatooh.org>
Date: Mon, 11 Feb 2019 17:42:27 -0800
Subject: [RHEL7.7 PATCH 21/24] add missing units to --examine
Within the output of "mdadm --examine", there are three sizes reported
on adjacent lines. For example:
$ sudo mdadm --examine /dev/md3
[...]
Avail Dev Size : 17580545024 (8383.06 GiB 9001.24 GB)
Array Size : 17580417024 (16765.99 GiB 18002.35 GB)
Used Dev Size : 11720278016 (5588.66 GiB 6000.78 GB)
[...]
This can be confusing, since the first and third line are in 512-byte
sectors, and the second is in KiB.
Add units to avoid ambiguity.
(I don't particularly like the "KiB" notation, but it is at least
unambiguous.)
Signed-off-by: Corey Hickey <bugfood-c@fatooh.org>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
super1.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/super1.c b/super1.c
index 636a286..b85dc20 100644
--- a/super1.c
+++ b/super1.c
@@ -360,7 +360,7 @@ static void examine_super1(struct supertype *st, char *homehost)
printf(" Raid Level : %s\n", c?c:"-unknown-");
printf(" Raid Devices : %d\n", __le32_to_cpu(sb->raid_disks));
printf("\n");
- printf(" Avail Dev Size : %llu%s\n",
+ printf(" Avail Dev Size : %llu sectors%s\n",
(unsigned long long)__le64_to_cpu(sb->data_size),
human_size(__le64_to_cpu(sb->data_size)<<9));
if (__le32_to_cpu(sb->level) > 0) {
@@ -378,11 +378,11 @@ static void examine_super1(struct supertype *st, char *homehost)
if (ddsks) {
long long asize = __le64_to_cpu(sb->size);
asize = (asize << 9) * ddsks / ddsks_denom;
- printf(" Array Size : %llu%s\n",
+ printf(" Array Size : %llu KiB%s\n",
asize >> 10, human_size(asize));
}
if (sb->size != sb->data_size)
- printf(" Used Dev Size : %llu%s\n",
+ printf(" Used Dev Size : %llu sectors%s\n",
(unsigned long long)__le64_to_cpu(sb->size),
human_size(__le64_to_cpu(sb->size)<<9));
}
--
2.7.5

View File

@ -0,0 +1,31 @@
From 953cc7e5a485a91ddec7312c7a5d7779749fad5f Mon Sep 17 00:00:00 2001
From: Kinga Tanska <kinga.tanska@intel.com>
Date: Tue, 21 Jun 2022 00:10:39 +0800
Subject: [PATCH 21/83] util: replace ioctl use with function
Replace using of ioctl calling to get md array info with
special function prepared to it.
Signed-off-by: Kinga Tanska <kinga.tanska@intel.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
util.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/util.c b/util.c
index cc94f96e..38f0420e 100644
--- a/util.c
+++ b/util.c
@@ -267,7 +267,7 @@ int md_array_active(int fd)
* GET_ARRAY_INFO doesn't provide access to the proper state
* information, so fallback to a basic check for raid_disks != 0
*/
- ret = ioctl(fd, GET_ARRAY_INFO, &array);
+ ret = md_get_array_info(fd, &array);
}
return !ret;
--
2.38.1

View File

@ -1,117 +0,0 @@
From 05501181f18cdccdb0b3cec1d8cf59f0995504d7 Mon Sep 17 00:00:00 2001
From: Pawel Baldysiak <pawel.baldysiak@intel.com>
Date: Fri, 8 Mar 2019 12:19:11 +0100
Subject: [RHEL7.7 PATCH 22/24] imsm: fix spare activation for old matrix
arrays
During spare activation get_extents() calculates metadata reserved space based
on smallest active RAID member or it will take the defaults. Since patch
611d9529("imsm: change reserved space to 4MB") default is extended. If array
was created prior that patch, reserved space is smaller. In case of matrix
RAID - spare is activated in each array one-by-one, so it is spare for first
activation, but treated as "active" during second one.
In case of adding spare drive to old matrix RAID with the size the same as
already existing member drive the routine will take the defaults during second
run and mdmon will refuse to rebuild second volume, claiming that the drive
does not have enough free space.
Add parameter to get_extents(), so the during spare activation reserved space
is always based on smallest active drive - even if given drive is already
active in some other array of matrix RAID.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
super-intel.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/super-intel.c b/super-intel.c
index c399433..5a7c9f8 100644
--- a/super-intel.c
+++ b/super-intel.c
@@ -1313,7 +1313,8 @@ static unsigned long long per_dev_array_size(struct imsm_map *map)
return array_size;
}
-static struct extent *get_extents(struct intel_super *super, struct dl *dl)
+static struct extent *get_extents(struct intel_super *super, struct dl *dl,
+ int get_minimal_reservation)
{
/* find a list of used extents on the given physical device */
struct extent *rv, *e;
@@ -1325,7 +1326,7 @@ static struct extent *get_extents(struct intel_super *super, struct dl *dl)
* regardless of whether the OROM has assigned sectors from the
* IMSM_RESERVED_SECTORS region
*/
- if (dl->index == -1)
+ if (dl->index == -1 || get_minimal_reservation)
reservation = imsm_min_reserved_sectors(super);
else
reservation = MPB_SECTOR_CNT + IMSM_RESERVED_SECTORS;
@@ -1386,7 +1387,7 @@ static __u32 imsm_reserved_sectors(struct intel_super *super, struct dl *dl)
if (dl->index == -1)
return MPB_SECTOR_CNT;
- e = get_extents(super, dl);
+ e = get_extents(super, dl, 0);
if (!e)
return MPB_SECTOR_CNT + IMSM_RESERVED_SECTORS;
@@ -1478,7 +1479,7 @@ static __u32 imsm_min_reserved_sectors(struct intel_super *super)
return rv;
/* find last lba used by subarrays on the smallest active disk */
- e = get_extents(super, dl_min);
+ e = get_extents(super, dl_min, 0);
if (!e)
return rv;
for (i = 0; e[i].size; i++)
@@ -1519,7 +1520,7 @@ int get_spare_criteria_imsm(struct supertype *st, struct spare_criteria *c)
if (!dl)
return -EINVAL;
/* find last lba used by subarrays */
- e = get_extents(super, dl);
+ e = get_extents(super, dl, 0);
if (!e)
return -EINVAL;
for (i = 0; e[i].size; i++)
@@ -7203,7 +7204,7 @@ static int validate_geometry_imsm_volume(struct supertype *st, int level,
pos = 0;
i = 0;
- e = get_extents(super, dl);
+ e = get_extents(super, dl, 0);
if (!e) continue;
do {
unsigned long long esize;
@@ -7261,7 +7262,7 @@ static int validate_geometry_imsm_volume(struct supertype *st, int level,
}
/* retrieve the largest free space block */
- e = get_extents(super, dl);
+ e = get_extents(super, dl, 0);
maxsize = 0;
i = 0;
if (e) {
@@ -7359,7 +7360,7 @@ static int imsm_get_free_size(struct supertype *st, int raiddisks,
if (super->orom && dl->index < 0 && mpb->num_raid_devs)
continue;
- e = get_extents(super, dl);
+ e = get_extents(super, dl, 0);
if (!e)
continue;
for (i = 1; e[i-1].size; i++)
@@ -8846,7 +8847,7 @@ static struct dl *imsm_add_spare(struct intel_super *super, int slot,
/* Does this unused device have the requisite free space?
* It needs to be able to cover all member volumes
*/
- ex = get_extents(super, dl);
+ ex = get_extents(super, dl, 1);
if (!ex) {
dprintf("cannot get extents\n");
continue;
--
2.7.5

View File

@ -0,0 +1,110 @@
From 63902857b98c37c8ac4b837bb01d006b327a4532 Mon Sep 17 00:00:00 2001
From: Heming Zhao <heming.zhao@suse.com>
Date: Tue, 21 Jun 2022 00:10:40 +0800
Subject: [PATCH 22/83] mdadm/super1: restore commit 45a87c2f31335 to fix
clustered slot issue
Commit 9d67f6496c71 ("mdadm:check the nodes when operate clustered
array") modified assignment logic for st->nodes in write_bitmap1(),
which introduced bitmap slot issue:
load_super1 didn't set up supertype.nodes, which made spare disk only
have one slot info. Then it triggered kernel md_bitmap_load_sb to get
wrong bitmap slot data.
For fixing this issue, there are two methods:
1> revert the related code of commit 9d67f6496c71. and restore the code
from former commit 45a87c2f31335 ("super1: add more checks for
NodeNumUpdate option").
st->nodes value would be 0 & 1 under current code logic. i.e.
When adding a spare disk, there is no place to init st->nodes, and
the value is ZERO.
2> keep 9d67f6496c71, add additional ->nodes handling in load_super1(),
let load_super1 to set st->nodes when bitmap is BITMAP_MAJOR_CLUSTERED.
Under current mdadm code logic, load_super1 will be called many
times, any new code in load_super1 will cost mdadm running more time.
And more reason is I prefer as much as possible to limit clustered
code spreading in every corner.
So I used method <1> to fix this issue.
How to trigger:
dd if=/dev/zero bs=1M count=1 oflag=direct of=/dev/sda
dd if=/dev/zero bs=1M count=1 oflag=direct of=/dev/sdb
dd if=/dev/zero bs=1M count=1 oflag=direct of=/dev/sdc
mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda /dev/sdb
mdadm -a /dev/md0 /dev/sdc
mdadm /dev/md0 --fail /dev/sda
mdadm /dev/md0 --remove /dev/sda
mdadm -Ss
mdadm -A /dev/md0 /dev/sdb /dev/sdc
the output of current "mdadm -X /dev/sdc":
(there should be (by default) 4 slot info for correct output)
```
Filename : /dev/sdc
Magic : 6d746962
Version : 5
UUID : a74642f8:a6b1fba8:58e1f8db:cfe7b082
Events : 29
Events Cleared : 0
State : OK
Chunksize : 64 MB
Daemon : 5s flush period
Write Mode : Normal
Sync Size : 306176 (299.00 MiB 313.52 MB)
Bitmap : 5 bits (chunks), 5 dirty (100.0%)
```
And mdadm later operations will trigger kernel output error message:
(triggered by "mdadm -A /dev/md0 /dev/sdb /dev/sdc")
```
kernel: md0: invalid bitmap file superblock: bad magic
kernel: md_bitmap_copy_from_slot can't get bitmap from slot 1
kernel: md-cluster: Could not gather bitmaps from slot 1
kernel: md0: invalid bitmap file superblock: bad magic
kernel: md_bitmap_copy_from_slot can't get bitmap from slot 2
kernel: md-cluster: Could not gather bitmaps from slot 2
kernel: md0: invalid bitmap file superblock: bad magic
kernel: md_bitmap_copy_from_slot can't get bitmap from slot 3
kernel: md-cluster: Could not gather bitmaps from slot 3
kernel: md-cluster: failed to gather all resyn infos
kernel: md0: detected capacity change from 0 to 612352
```
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
super1.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/super1.c b/super1.c
index e3e2f954..3a0c69fd 100644
--- a/super1.c
+++ b/super1.c
@@ -2674,7 +2674,17 @@ static int write_bitmap1(struct supertype *st, int fd, enum bitmap_update update
}
if (bms->version == BITMAP_MAJOR_CLUSTERED) {
- if (__cpu_to_le32(st->nodes) < bms->nodes) {
+ if (st->nodes == 1) {
+ /* the parameter for nodes is not valid */
+ pr_err("Warning: cluster-md at least needs two nodes\n");
+ return -EINVAL;
+ } else if (st->nodes == 0) {
+ /*
+ * parameter "--nodes" is not specified, (eg, add a disk to
+ * clustered raid)
+ */
+ break;
+ } else if (__cpu_to_le32(st->nodes) < bms->nodes) {
/*
* Since the nodes num is not increased, no
* need to check the space enough or not,
--
2.38.1

View File

@ -1,94 +0,0 @@
From 22dc741f63e6403d59c2c14f56fd4791265f9bbb Mon Sep 17 00:00:00 2001
From: Mariusz Tkaczyk <mariusz.tkaczyk@intel.com>
Date: Mon, 1 Apr 2019 16:53:41 +0200
Subject: [RHEL7.7 PATCH 23/24] Create: Block rounding size to max
When passed size is smaller than chunk, mdadm rounds it to 0 but 0 there
means max available space.
Block it for every metadata. Remove the same check from imsm routine.
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Create.c | 23 ++++++++++++++++++++---
super-intel.c | 5 ++---
2 files changed, 22 insertions(+), 6 deletions(-)
diff --git a/Create.c b/Create.c
index 6f1b228..292f92a 100644
--- a/Create.c
+++ b/Create.c
@@ -27,6 +27,18 @@
#include "md_p.h"
#include <ctype.h>
+static int round_size_and_verify(unsigned long long *size, int chunk)
+{
+ if (*size == 0)
+ return 0;
+ *size &= ~(unsigned long long)(chunk - 1);
+ if (*size == 0) {
+ pr_err("Size cannot be smaller than chunk.\n");
+ return 1;
+ }
+ return 0;
+}
+
static int default_layout(struct supertype *st, int level, int verbose)
{
int layout = UnSet;
@@ -248,11 +260,14 @@ int Create(struct supertype *st, char *mddev,
pr_err("unknown level %d\n", s->level);
return 1;
}
+
if (s->size == MAX_SIZE)
/* use '0' to mean 'max' now... */
s->size = 0;
if (s->size && s->chunk && s->chunk != UnSet)
- s->size &= ~(unsigned long long)(s->chunk - 1);
+ if (round_size_and_verify(&s->size, s->chunk))
+ return 1;
+
newsize = s->size * 2;
if (st && ! st->ss->validate_geometry(st, s->level, s->layout, s->raiddisks,
&s->chunk, s->size*2,
@@ -267,7 +282,8 @@ int Create(struct supertype *st, char *mddev,
/* default chunk was just set */
if (c->verbose > 0)
pr_err("chunk size defaults to %dK\n", s->chunk);
- s->size &= ~(unsigned long long)(s->chunk - 1);
+ if (round_size_and_verify(&s->size, s->chunk))
+ return 1;
do_default_chunk = 0;
}
}
@@ -413,7 +429,8 @@ int Create(struct supertype *st, char *mddev,
/* default chunk was just set */
if (c->verbose > 0)
pr_err("chunk size defaults to %dK\n", s->chunk);
- s->size &= ~(unsigned long long)(s->chunk - 1);
+ if (round_size_and_verify(&s->size, s->chunk))
+ return 1;
do_default_chunk = 0;
}
}
diff --git a/super-intel.c b/super-intel.c
index 5a7c9f8..2ba045a 100644
--- a/super-intel.c
+++ b/super-intel.c
@@ -7455,9 +7455,8 @@ static int validate_geometry_imsm(struct supertype *st, int level, int layout,
verbose);
}
- if (size && ((size < 1024) || (*chunk != UnSet &&
- size < (unsigned long long) *chunk))) {
- pr_err("Given size must be greater than 1M and chunk size.\n");
+ if (size && (size < 1024)) {
+ pr_err("Given size must be greater than 1M.\n");
/* Depends on algorithm in Create.c :
* if container was given (dev == NULL) return -1,
* if block device was given ( dev != NULL) return 0.
--
2.7.5

View File

@ -0,0 +1,122 @@
From 76c152ca9851e9fcdf52e8f6e7e6c09b936bdd14 Mon Sep 17 00:00:00 2001
From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Date: Tue, 21 Jun 2022 00:10:41 +0800
Subject: [PATCH 23/83] imsm: introduce get_disk_slot_in_dev()
The routine was added to remove unnecessary get_imsm_dev() and
get_imsm_map() calls, used only to determine disk slot.
Additionally, enum for IMSM return statues was added for further usage.
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
super-intel.c | 47 ++++++++++++++++++++++++++++++++++++-----------
1 file changed, 36 insertions(+), 11 deletions(-)
diff --git a/super-intel.c b/super-intel.c
index 3788feb9..cd1f1e3d 100644
--- a/super-intel.c
+++ b/super-intel.c
@@ -366,6 +366,18 @@ struct migr_record {
};
ASSERT_SIZE(migr_record, 128)
+/**
+ * enum imsm_status - internal IMSM return values representation.
+ * @STATUS_OK: function succeeded.
+ * @STATUS_ERROR: General error ocurred (not specified).
+ *
+ * Typedefed to imsm_status_t.
+ */
+typedef enum imsm_status {
+ IMSM_STATUS_ERROR = -1,
+ IMSM_STATUS_OK = 0,
+} imsm_status_t;
+
struct md_list {
/* usage marker:
* 1: load metadata
@@ -1183,7 +1195,7 @@ static void set_imsm_ord_tbl_ent(struct imsm_map *map, int slot, __u32 ord)
map->disk_ord_tbl[slot] = __cpu_to_le32(ord);
}
-static int get_imsm_disk_slot(struct imsm_map *map, unsigned idx)
+static int get_imsm_disk_slot(struct imsm_map *map, const unsigned int idx)
{
int slot;
__u32 ord;
@@ -1194,7 +1206,7 @@ static int get_imsm_disk_slot(struct imsm_map *map, unsigned idx)
return slot;
}
- return -1;
+ return IMSM_STATUS_ERROR;
}
static int get_imsm_raid_level(struct imsm_map *map)
@@ -1209,6 +1221,23 @@ static int get_imsm_raid_level(struct imsm_map *map)
return map->raid_level;
}
+/**
+ * get_disk_slot_in_dev() - retrieve disk slot from &imsm_dev.
+ * @super: &intel_super pointer, not NULL.
+ * @dev_idx: imsm device index.
+ * @idx: disk index.
+ *
+ * Return: Slot on success, IMSM_STATUS_ERROR otherwise.
+ */
+static int get_disk_slot_in_dev(struct intel_super *super, const __u8 dev_idx,
+ const unsigned int idx)
+{
+ struct imsm_dev *dev = get_imsm_dev(super, dev_idx);
+ struct imsm_map *map = get_imsm_map(dev, MAP_0);
+
+ return get_imsm_disk_slot(map, idx);
+}
+
static int cmp_extent(const void *av, const void *bv)
{
const struct extent *a = av;
@@ -1225,13 +1254,9 @@ static int count_memberships(struct dl *dl, struct intel_super *super)
int memberships = 0;
int i;
- for (i = 0; i < super->anchor->num_raid_devs; i++) {
- struct imsm_dev *dev = get_imsm_dev(super, i);
- struct imsm_map *map = get_imsm_map(dev, MAP_0);
-
- if (get_imsm_disk_slot(map, dl->index) >= 0)
+ for (i = 0; i < super->anchor->num_raid_devs; i++)
+ if (get_disk_slot_in_dev(super, i, dl->index) >= 0)
memberships++;
- }
return memberships;
}
@@ -1941,6 +1966,7 @@ void examine_migr_rec_imsm(struct intel_super *super)
/* first map under migration */
map = get_imsm_map(dev, MAP_0);
+
if (map)
slot = get_imsm_disk_slot(map, super->disks->index);
if (map == NULL || slot > 1 || slot < 0) {
@@ -9655,10 +9681,9 @@ static int apply_update_activate_spare(struct imsm_update_activate_spare *u,
/* count arrays using the victim in the metadata */
found = 0;
for (a = active_array; a ; a = a->next) {
- dev = get_imsm_dev(super, a->info.container_member);
- map = get_imsm_map(dev, MAP_0);
+ int dev_idx = a->info.container_member;
- if (get_imsm_disk_slot(map, victim) >= 0)
+ if (get_disk_slot_in_dev(super, dev_idx, victim) >= 0)
found++;
}
--
2.38.1

View File

@ -0,0 +1,252 @@
From 6d4d9ab295de165e57b5c30e044028dbffb8f297 Mon Sep 17 00:00:00 2001
From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Date: Tue, 21 Jun 2022 00:10:42 +0800
Subject: [PATCH 24/83] imsm: use same slot across container
Autolayout relies on drives order on super->disks list, but
it is not quaranted by readdir() in sysfs_read(). As a result
drive could be put in different slot in second volume.
Make it consistent by reffering to first volume, if exists.
Use enum imsm_status to unify error handling.
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
super-intel.c | 169 ++++++++++++++++++++++++++++++++------------------
1 file changed, 108 insertions(+), 61 deletions(-)
diff --git a/super-intel.c b/super-intel.c
index cd1f1e3d..deef7c87 100644
--- a/super-intel.c
+++ b/super-intel.c
@@ -7522,11 +7522,27 @@ static int validate_geometry_imsm_volume(struct supertype *st, int level,
return 1;
}
-static int imsm_get_free_size(struct supertype *st, int raiddisks,
- unsigned long long size, int chunk,
- unsigned long long *freesize)
+/**
+ * imsm_get_free_size() - get the biggest, common free space from members.
+ * @super: &intel_super pointer, not NULL.
+ * @raiddisks: number of raid disks.
+ * @size: requested size, could be 0 (means max size).
+ * @chunk: requested chunk.
+ * @freesize: pointer for returned size value.
+ *
+ * Return: &IMSM_STATUS_OK or &IMSM_STATUS_ERROR.
+ *
+ * @freesize is set to meaningful value, this can be @size, or calculated
+ * max free size.
+ * super->create_offset value is modified and set appropriately in
+ * merge_extends() for further creation.
+ */
+static imsm_status_t imsm_get_free_size(struct intel_super *super,
+ const int raiddisks,
+ unsigned long long size,
+ const int chunk,
+ unsigned long long *freesize)
{
- struct intel_super *super = st->sb;
struct imsm_super *mpb = super->anchor;
struct dl *dl;
int i;
@@ -7570,12 +7586,10 @@ static int imsm_get_free_size(struct supertype *st, int raiddisks,
/* chunk is in K */
minsize = chunk * 2;
- if (cnt < raiddisks ||
- (super->orom && used && used != raiddisks) ||
- maxsize < minsize ||
- maxsize == 0) {
+ if (cnt < raiddisks || (super->orom && used && used != raiddisks) ||
+ maxsize < minsize || maxsize == 0) {
pr_err("not enough devices with space to create array.\n");
- return 0; /* No enough free spaces large enough */
+ return IMSM_STATUS_ERROR;
}
if (size == 0) {
@@ -7588,37 +7602,69 @@ static int imsm_get_free_size(struct supertype *st, int raiddisks,
}
if (mpb->num_raid_devs > 0 && size && size != maxsize)
pr_err("attempting to create a second volume with size less then remaining space.\n");
- cnt = 0;
- for (dl = super->disks; dl; dl = dl->next)
- if (dl->e)
- dl->raiddisk = cnt++;
-
*freesize = size;
dprintf("imsm: imsm_get_free_size() returns : %llu\n", size);
- return 1;
+ return IMSM_STATUS_OK;
}
-static int reserve_space(struct supertype *st, int raiddisks,
- unsigned long long size, int chunk,
- unsigned long long *freesize)
+/**
+ * autolayout_imsm() - automatically layout a new volume.
+ * @super: &intel_super pointer, not NULL.
+ * @raiddisks: number of raid disks.
+ * @size: requested size, could be 0 (means max size).
+ * @chunk: requested chunk.
+ * @freesize: pointer for returned size value.
+ *
+ * We are being asked to automatically layout a new volume based on the current
+ * contents of the container. If the parameters can be satisfied autolayout_imsm
+ * will record the disks, start offset, and will return size of the volume to
+ * be created. See imsm_get_free_size() for details.
+ * add_to_super() and getinfo_super() detect when autolayout is in progress.
+ * If first volume exists, slots are set consistently to it.
+ *
+ * Return: &IMSM_STATUS_OK on success, &IMSM_STATUS_ERROR otherwise.
+ *
+ * Disks are marked for creation via dl->raiddisk.
+ */
+static imsm_status_t autolayout_imsm(struct intel_super *super,
+ const int raiddisks,
+ unsigned long long size, const int chunk,
+ unsigned long long *freesize)
{
- struct intel_super *super = st->sb;
- struct dl *dl;
- int cnt;
- int rv = 0;
+ int curr_slot = 0;
+ struct dl *disk;
+ int vol_cnt = super->anchor->num_raid_devs;
+ imsm_status_t rv;
- rv = imsm_get_free_size(st, raiddisks, size, chunk, freesize);
- if (rv) {
- cnt = 0;
- for (dl = super->disks; dl; dl = dl->next)
- if (dl->e)
- dl->raiddisk = cnt++;
- rv = 1;
+ rv = imsm_get_free_size(super, raiddisks, size, chunk, freesize);
+ if (rv != IMSM_STATUS_OK)
+ return IMSM_STATUS_ERROR;
+
+ for (disk = super->disks; disk; disk = disk->next) {
+ if (!disk->e)
+ continue;
+
+ if (curr_slot == raiddisks)
+ break;
+
+ if (vol_cnt == 0) {
+ disk->raiddisk = curr_slot;
+ } else {
+ int _slot = get_disk_slot_in_dev(super, 0, disk->index);
+
+ if (_slot == -1) {
+ pr_err("Disk %s is not used in first volume, aborting\n",
+ disk->devname);
+ return IMSM_STATUS_ERROR;
+ }
+ disk->raiddisk = _slot;
+ }
+ curr_slot++;
}
- return rv;
+ return IMSM_STATUS_OK;
}
static int validate_geometry_imsm(struct supertype *st, int level, int layout,
@@ -7654,35 +7700,35 @@ static int validate_geometry_imsm(struct supertype *st, int level, int layout,
}
if (!dev) {
- if (st->sb) {
- struct intel_super *super = st->sb;
- if (!validate_geometry_imsm_orom(st->sb, level, layout,
- raiddisks, chunk, size,
- verbose))
+ struct intel_super *super = st->sb;
+
+ /*
+ * Autolayout mode, st->sb and freesize must be set.
+ */
+ if (!super || !freesize) {
+ pr_vrb("freesize and superblock must be set for autolayout, aborting\n");
+ return 1;
+ }
+
+ if (!validate_geometry_imsm_orom(st->sb, level, layout,
+ raiddisks, chunk, size,
+ verbose))
+ return 0;
+
+ if (super->orom) {
+ imsm_status_t rv;
+ int count = count_volumes(super->hba, super->orom->dpa,
+ verbose);
+ if (super->orom->vphba <= count) {
+ pr_vrb("platform does not support more than %d raid volumes.\n",
+ super->orom->vphba);
return 0;
- /* we are being asked to automatically layout a
- * new volume based on the current contents of
- * the container. If the the parameters can be
- * satisfied reserve_space will record the disks,
- * start offset, and size of the volume to be
- * created. add_to_super and getinfo_super
- * detect when autolayout is in progress.
- */
- /* assuming that freesize is always given when array is
- created */
- if (super->orom && freesize) {
- int count;
- count = count_volumes(super->hba,
- super->orom->dpa, verbose);
- if (super->orom->vphba <= count) {
- pr_vrb("platform does not support more than %d raid volumes.\n",
- super->orom->vphba);
- return 0;
- }
}
- if (freesize)
- return reserve_space(st, raiddisks, size,
- *chunk, freesize);
+
+ rv = autolayout_imsm(super, raiddisks, size, *chunk,
+ freesize);
+ if (rv != IMSM_STATUS_OK)
+ return 0;
}
return 1;
}
@@ -11538,7 +11584,7 @@ enum imsm_reshape_type imsm_analyze_change(struct supertype *st,
unsigned long long current_size;
unsigned long long free_size;
unsigned long long max_size;
- int rv;
+ imsm_status_t rv;
getinfo_super_imsm_volume(st, &info, NULL);
if (geo->level != info.array.level && geo->level >= 0 &&
@@ -11657,9 +11703,10 @@ enum imsm_reshape_type imsm_analyze_change(struct supertype *st,
}
/* check the maximum available size
*/
- rv = imsm_get_free_size(st, dev->vol.map->num_members,
- 0, chunk, &free_size);
- if (rv == 0)
+ rv = imsm_get_free_size(super, dev->vol.map->num_members,
+ 0, chunk, &free_size);
+
+ if (rv != IMSM_STATUS_OK)
/* Cannot find maximum available space
*/
max_size = 0;
--
2.38.1

View File

@ -1,31 +0,0 @@
From 3c9b46cf9ae15a9be98fc47e2080bd9494496246 Mon Sep 17 00:00:00 2001
From: Liwei Song <liwei.song@windriver.com>
Date: Tue, 19 Mar 2019 23:51:05 -0400
Subject: [RHEL7.7 PATCH 24/24] udev: Add udev rules to create by-partuuid for
md device
This rules will create link under /dev/disk/by-partuuid/ for
MD devices partition, with which will support specify
root=PARTUUID=XXX to boot rootfs.
Signed-off-by: Liwei Song <liwei.song@windriver.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
udev-md-raid-arrays.rules | 1 +
1 file changed, 1 insertion(+)
diff --git a/udev-md-raid-arrays.rules b/udev-md-raid-arrays.rules
index c95ec7b..5b99d58 100644
--- a/udev-md-raid-arrays.rules
+++ b/udev-md-raid-arrays.rules
@@ -30,6 +30,7 @@ IMPORT{builtin}="blkid"
OPTIONS+="link_priority=100"
OPTIONS+="watch"
ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}"
+ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_PART_ENTRY_UUID}=="?*", SYMLINK+="disk/by-partuuid/$env{ID_PART_ENTRY_UUID}"
ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}"
ENV{MD_LEVEL}=="raid[1-9]*", ENV{SYSTEMD_WANTS}+="mdmonitor.service"
--
2.7.5

View File

@ -0,0 +1,122 @@
From 9a7df595bbe360132cb37c8b39aa1fd9ac24b43f Mon Sep 17 00:00:00 2001
From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Date: Tue, 21 Jun 2022 00:10:43 +0800
Subject: [PATCH 25/83] imsm: block changing slots during creation
If user specifies drives for array creation, then slot order across
volumes is not preserved.
Ideally, it should be checked in validate_geometry() but it is not
possible in current implementation (order is determined later).
Add verification in add_to_super_imsm_volume() and throw error if
mismatch is detected.
IMSM allows to use only same members within container.
This is not hardware dependency but metadata limitation.
Therefore, 09-imsm-overlap test is removed. Testing it is pointless.
After this patch, creation in this scenario is blocked. Offset
verification is covered in other tests.
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
super-intel.c | 33 ++++++++++++++++++++++-----------
tests/09imsm-overlap | 28 ----------------------------
2 files changed, 22 insertions(+), 39 deletions(-)
delete mode 100644 tests/09imsm-overlap
diff --git a/super-intel.c b/super-intel.c
index deef7c87..8ffe485c 100644
--- a/super-intel.c
+++ b/super-intel.c
@@ -5789,6 +5789,10 @@ static int add_to_super_imsm_volume(struct supertype *st, mdu_disk_info_t *dk,
struct imsm_map *map;
struct dl *dl, *df;
int slot;
+ int autolayout = 0;
+
+ if (!is_fd_valid(fd))
+ autolayout = 1;
dev = get_imsm_dev(super, super->current_vol);
map = get_imsm_map(dev, MAP_0);
@@ -5799,25 +5803,32 @@ static int add_to_super_imsm_volume(struct supertype *st, mdu_disk_info_t *dk,
return 1;
}
- if (!is_fd_valid(fd)) {
- /* we're doing autolayout so grab the pre-marked (in
- * validate_geometry) raid_disk
- */
- for (dl = super->disks; dl; dl = dl->next)
+ for (dl = super->disks; dl ; dl = dl->next) {
+ if (autolayout) {
if (dl->raiddisk == dk->raid_disk)
break;
- } else {
- for (dl = super->disks; dl ; dl = dl->next)
- if (dl->major == dk->major &&
- dl->minor == dk->minor)
- break;
+ } else if (dl->major == dk->major && dl->minor == dk->minor)
+ break;
}
if (!dl) {
- pr_err("%s is not a member of the same container\n", devname);
+ if (!autolayout)
+ pr_err("%s is not a member of the same container.\n",
+ devname);
return 1;
}
+ if (!autolayout && super->current_vol > 0) {
+ int _slot = get_disk_slot_in_dev(super, 0, dl->index);
+
+ if (_slot != dk->raid_disk) {
+ pr_err("Member %s is in %d slot for the first volume, but is in %d slot for a new volume.\n",
+ dl->devname, _slot, dk->raid_disk);
+ pr_err("Raid members are in different order than for the first volume, aborting.\n");
+ return 1;
+ }
+ }
+
if (mpb->num_disks == 0)
if (!get_dev_sector_size(dl->fd, dl->devname,
&super->sector_size))
diff --git a/tests/09imsm-overlap b/tests/09imsm-overlap
deleted file mode 100644
index ff5d2093..00000000
--- a/tests/09imsm-overlap
+++ /dev/null
@@ -1,28 +0,0 @@
-
-. tests/env-imsm-template
-
-# create raid arrays with varying degress of overlap
-mdadm -CR $container -e imsm -n 6 $dev0 $dev1 $dev2 $dev3 $dev4 $dev5
-imsm_check container 6
-
-size=1024
-level=1
-num_disks=2
-mdadm -CR $member0 $dev0 $dev1 -n $num_disks -l $level -z $size
-mdadm -CR $member1 $dev1 $dev2 -n $num_disks -l $level -z $size
-mdadm -CR $member2 $dev2 $dev3 -n $num_disks -l $level -z $size
-mdadm -CR $member3 $dev3 $dev4 -n $num_disks -l $level -z $size
-mdadm -CR $member4 $dev4 $dev5 -n $num_disks -l $level -z $size
-
-udevadm settle
-
-offset=0
-imsm_check member $member0 $num_disks $level $size 1024 $offset
-offset=$((offset+size+4096))
-imsm_check member $member1 $num_disks $level $size 1024 $offset
-offset=$((offset+size+4096))
-imsm_check member $member2 $num_disks $level $size 1024 $offset
-offset=$((offset+size+4096))
-imsm_check member $member3 $num_disks $level $size 1024 $offset
-offset=$((offset+size+4096))
-imsm_check member $member4 $num_disks $level $size 1024 $offset
--
2.38.1

View File

@ -0,0 +1,177 @@
From 70f1ff4291b0388adca1f4c91918ce1175e8b360 Mon Sep 17 00:00:00 2001
From: Lukasz Florczak <lukasz.florczak@linux.intel.com>
Date: Wed, 15 Jun 2022 14:28:39 +0200
Subject: [PATCH 26/83] mdadm: block update=ppl for non raid456 levels
Option ppl should be used only for raid levels 4, 5 and 6. Cancel update
for other levels.
Applied globally for imsm and ddf format.
Additionally introduce is_level456() helper function.
Signed-off-by: Lukasz Florczak <lukasz.florczak@linux.intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Assemble.c | 11 +++++------
Grow.c | 2 +-
Manage.c | 14 ++++++++++++--
mdadm.h | 11 +++++++++++
super0.c | 2 +-
super1.c | 3 +--
6 files changed, 31 insertions(+), 12 deletions(-)
diff --git a/Assemble.c b/Assemble.c
index 4b213560..6df6bfbc 100644
--- a/Assemble.c
+++ b/Assemble.c
@@ -906,8 +906,7 @@ static int force_array(struct mdinfo *content,
* devices in RAID4 or last devices in RAID4/5/6.
*/
delta = devices[j].i.delta_disks;
- if (devices[j].i.array.level >= 4 &&
- devices[j].i.array.level <= 6 &&
+ if (is_level456(devices[j].i.array.level) &&
i/2 >= content->array.raid_disks - delta)
/* OK */;
else if (devices[j].i.array.level == 4 &&
@@ -1226,8 +1225,7 @@ static int start_array(int mdfd,
fprintf(stderr, ".\n");
}
if (content->reshape_active &&
- content->array.level >= 4 &&
- content->array.level <= 6) {
+ is_level456(content->array.level)) {
/* might need to increase the size
* of the stripe cache - default is 256
*/
@@ -1974,7 +1972,8 @@ int assemble_container_content(struct supertype *st, int mdfd,
int start_reshape;
char *avail;
int err;
- int is_raid456, is_clean, all_disks;
+ int is_clean, all_disks;
+ bool is_raid456;
if (sysfs_init(content, mdfd, NULL)) {
pr_err("Unable to initialize sysfs\n");
@@ -2107,7 +2106,7 @@ int assemble_container_content(struct supertype *st, int mdfd,
content->array.state |= 1;
}
- is_raid456 = (content->array.level >= 4 && content->array.level <= 6);
+ is_raid456 = is_level456(content->array.level);
is_clean = content->array.state & 1;
if (enough(content->array.level, content->array.raid_disks,
diff --git a/Grow.c b/Grow.c
index f6efbc48..8c520d42 100644
--- a/Grow.c
+++ b/Grow.c
@@ -2944,7 +2944,7 @@ static int impose_level(int fd, int level, char *devname, int verbose)
}
md_get_array_info(fd, &array);
- if (level == 0 && (array.level >= 4 && array.level <= 6)) {
+ if (level == 0 && is_level456(array.level)) {
/* To convert to RAID0 we need to fail and
* remove any non-data devices. */
int found = 0;
diff --git a/Manage.c b/Manage.c
index f789e0c1..e5e6abe4 100644
--- a/Manage.c
+++ b/Manage.c
@@ -307,7 +307,7 @@ int Manage_stop(char *devname, int fd, int verbose, int will_retry)
* - unfreeze reshape
* - wait on 'sync_completed' for that point to be reached.
*/
- if (mdi && (mdi->array.level >= 4 && mdi->array.level <= 6) &&
+ if (mdi && is_level456(mdi->array.level) &&
sysfs_attribute_available(mdi, NULL, "sync_action") &&
sysfs_attribute_available(mdi, NULL, "reshape_direction") &&
sysfs_get_str(mdi, NULL, "sync_action", buf, 20) > 0 &&
@@ -1679,6 +1679,7 @@ int Update_subarray(char *dev, char *subarray, char *update, struct mddev_ident
{
struct supertype supertype, *st = &supertype;
int fd, rv = 2;
+ struct mdinfo *info = NULL;
memset(st, 0, sizeof(*st));
@@ -1696,6 +1697,13 @@ int Update_subarray(char *dev, char *subarray, char *update, struct mddev_ident
if (mdmon_running(st->devnm))
st->update_tail = &st->updates;
+ info = st->ss->container_content(st, subarray);
+
+ if (strncmp(update, "ppl", 3) == 0 && !is_level456(info->array.level)) {
+ pr_err("RWH policy ppl is supported only for raid4, raid5 and raid6.\n");
+ goto free_super;
+ }
+
rv = st->ss->update_subarray(st, subarray, update, ident);
if (rv) {
@@ -1711,7 +1719,9 @@ int Update_subarray(char *dev, char *subarray, char *update, struct mddev_ident
pr_err("Updated subarray-%s name from %s, UUIDs may have changed\n",
subarray, dev);
- free_super:
+free_super:
+ if (info)
+ free(info);
st->ss->free_super(st);
close(fd);
diff --git a/mdadm.h b/mdadm.h
index d53df169..974415b9 100644
--- a/mdadm.h
+++ b/mdadm.h
@@ -796,6 +796,17 @@ static inline int is_fd_valid(int fd)
return (fd > -1);
}
+/**
+ * is_level456() - check whether given level is between inclusive 4 and 6.
+ * @level: level to check.
+ *
+ * Return: true if condition is met, false otherwise
+ */
+static inline bool is_level456(int level)
+{
+ return (level >= 4 && level <= 6);
+}
+
/**
* close_fd() - verify, close and unset file descriptor.
* @fd: pointer to file descriptor.
diff --git a/super0.c b/super0.c
index 61c9ec1d..37f595ed 100644
--- a/super0.c
+++ b/super0.c
@@ -683,7 +683,7 @@ static int update_super0(struct supertype *st, struct mdinfo *info,
int parity = sb->level == 6 ? 2 : 1;
rv = 0;
- if (sb->level >= 4 && sb->level <= 6 &&
+ if (is_level456(sb->level) &&
sb->reshape_position % (
sb->new_chunk/512 *
(sb->raid_disks - sb->delta_disks - parity))) {
diff --git a/super1.c b/super1.c
index 3a0c69fd..71af860c 100644
--- a/super1.c
+++ b/super1.c
@@ -1530,8 +1530,7 @@ static int update_super1(struct supertype *st, struct mdinfo *info,
* So we reject a revert-reshape unless the
* alignment is good.
*/
- if (__le32_to_cpu(sb->level) >= 4 &&
- __le32_to_cpu(sb->level) <= 6) {
+ if (is_level456(__le32_to_cpu(sb->level))) {
reshape_sectors =
__le64_to_cpu(sb->reshape_position);
reshape_chunk = __le32_to_cpu(sb->new_chunk);
--
2.38.1

View File

@ -0,0 +1,30 @@
From 42e02e613fb0b4a2c0c0d984b9e6e2933875bb44 Mon Sep 17 00:00:00 2001
From: Lukasz Florczak <lukasz.florczak@linux.intel.com>
Date: Fri, 22 Jul 2022 08:43:47 +0200
Subject: [PATCH 27/83] mdadm: Fix array size mismatch after grow
imsm_fix_size_mismatch() is invoked to fix the problem, but it couldn't
proceed due to migration check. This patch allows for intended behavior.
Signed-off-by: Lukasz Florczak <lukasz.florczak@linux.intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
super-intel.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/super-intel.c b/super-intel.c
index 8ffe485c..76b947f5 100644
--- a/super-intel.c
+++ b/super-intel.c
@@ -11854,7 +11854,7 @@ static int imsm_fix_size_mismatch(struct supertype *st, int subarray_index)
unsigned long long d_size = imsm_dev_size(dev);
int u_size;
- if (calc_size == d_size || dev->vol.migr_type == MIGR_GEN_MIGR)
+ if (calc_size == d_size)
continue;
/* There is a difference, confirm that imsm_dev_size is
--
2.38.1

View File

@ -0,0 +1,34 @@
From 751757620afb25a4c02746bf8368a7b5f22352ec Mon Sep 17 00:00:00 2001
From: Lukasz Florczak <lukasz.florczak@linux.intel.com>
Date: Fri, 22 Jul 2022 08:43:48 +0200
Subject: [PATCH 28/83] mdadm: Remove dead code in imsm_fix_size_mismatch
imsm_create_metadata_update_for_size_change() that returns u_size value
could return 0 in the past. As its behavior changed, and returned value
is always the size of imsm_update_size_change structure, check for
u_size is no longer needed.
Signed-off-by: Lukasz Florczak <lukasz.florczak@linux.intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
super-intel.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/super-intel.c b/super-intel.c
index 76b947f5..4ddfcf94 100644
--- a/super-intel.c
+++ b/super-intel.c
@@ -11869,10 +11869,6 @@ static int imsm_fix_size_mismatch(struct supertype *st, int subarray_index)
geo.size = d_size;
u_size = imsm_create_metadata_update_for_size_change(st, &geo,
&update);
- if (u_size < 1) {
- dprintf("imsm: Cannot prepare size change update\n");
- goto exit;
- }
imsm_update_metadata_locally(st, update, u_size);
if (st->update_tail) {
append_metadata_update(st, update, u_size);
--
2.38.1

View File

@ -0,0 +1,40 @@
From c8d1c398505b62d9129a4e711f17e4469f4327ff Mon Sep 17 00:00:00 2001
From: Kinga Tanska <kinga.tanska@intel.com>
Date: Thu, 14 Jul 2022 09:02:10 +0200
Subject: [PATCH 29/83] Monitor: use devname as char array instead of pointer
Device name wasn't filled properly due to incorrect use of strcpy.
Strcpy was used twice. Firstly to fill devname with "/dev/md/"
and then to add chosen name. First strcpy result was overwritten by
second one (as a result <device_name> instead of "/dev/md/<device_name>"
was assigned). This commit changes this implementation to use snprintf
and devname with fixed size.
Signed-off-by: Kinga Tanska <kinga.tanska@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Monitor.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/Monitor.c b/Monitor.c
index 6ca1ebe5..a5b11ae2 100644
--- a/Monitor.c
+++ b/Monitor.c
@@ -190,9 +190,11 @@ int Monitor(struct mddev_dev *devlist,
if (mdlist->devname[0] == '/')
st->devname = xstrdup(mdlist->devname);
else {
- st->devname = xmalloc(8+strlen(mdlist->devname)+1);
- strcpy(strcpy(st->devname, "/dev/md/"),
- mdlist->devname);
+ /* length of "/dev/md/" + device name + terminating byte */
+ size_t _len = sizeof("/dev/md/") + strnlen(mdlist->devname, PATH_MAX);
+
+ st->devname = xcalloc(_len, sizeof(char));
+ snprintf(st->devname, _len, "/dev/md/%s", mdlist->devname);
}
if (!is_mddev(mdlist->devname))
return 1;
--
2.38.1

View File

@ -0,0 +1,133 @@
From 84d969be8f6d8a345b75f558fad26e4f62a558f6 Mon Sep 17 00:00:00 2001
From: Kinga Tanska <kinga.tanska@intel.com>
Date: Thu, 14 Jul 2022 09:02:11 +0200
Subject: [PATCH 30/83] Monitor: use snprintf to fill device name
Safe string functions are propagated in Monitor.c.
Signed-off-by: Kinga Tanska <kinga.tanska@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Monitor.c | 37 ++++++++++++++-----------------------
1 file changed, 14 insertions(+), 23 deletions(-)
diff --git a/Monitor.c b/Monitor.c
index a5b11ae2..93f36ac0 100644
--- a/Monitor.c
+++ b/Monitor.c
@@ -33,8 +33,8 @@
#endif
struct state {
- char *devname;
- char devnm[32]; /* to sync with mdstat info */
+ char devname[MD_NAME_MAX + sizeof("/dev/md/")]; /* length of "/dev/md/" + device name + terminating byte*/
+ char devnm[MD_NAME_MAX]; /* to sync with mdstat info */
unsigned int utime;
int err;
char *spare_group;
@@ -45,9 +45,9 @@ struct state {
int devstate[MAX_DISKS];
dev_t devid[MAX_DISKS];
int percent;
- char parent_devnm[32]; /* For subarray, devnm of parent.
- * For others, ""
- */
+ char parent_devnm[MD_NAME_MAX]; /* For subarray, devnm of parent.
+ * For others, ""
+ */
struct supertype *metadata;
struct state *subarray;/* for a container it is a link to first subarray
* for a subarray it is a link to next subarray
@@ -187,15 +187,8 @@ int Monitor(struct mddev_dev *devlist,
continue;
st = xcalloc(1, sizeof *st);
- if (mdlist->devname[0] == '/')
- st->devname = xstrdup(mdlist->devname);
- else {
- /* length of "/dev/md/" + device name + terminating byte */
- size_t _len = sizeof("/dev/md/") + strnlen(mdlist->devname, PATH_MAX);
-
- st->devname = xcalloc(_len, sizeof(char));
- snprintf(st->devname, _len, "/dev/md/%s", mdlist->devname);
- }
+ snprintf(st->devname, MD_NAME_MAX + sizeof("/dev/md/"),
+ "/dev/md/%s", basename(mdlist->devname));
if (!is_mddev(mdlist->devname))
return 1;
st->next = statelist;
@@ -218,7 +211,7 @@ int Monitor(struct mddev_dev *devlist,
st = xcalloc(1, sizeof *st);
mdlist = conf_get_ident(dv->devname);
- st->devname = xstrdup(dv->devname);
+ snprintf(st->devname, MD_NAME_MAX + sizeof("/dev/md/"), "%s", dv->devname);
st->next = statelist;
st->devnm[0] = 0;
st->percent = RESYNC_UNKNOWN;
@@ -301,7 +294,6 @@ int Monitor(struct mddev_dev *devlist,
for (stp = &statelist; (st = *stp) != NULL; ) {
if (st->from_auto && st->err > 5) {
*stp = st->next;
- free(st->devname);
free(st->spare_group);
free(st);
} else
@@ -554,7 +546,7 @@ static int check_array(struct state *st, struct mdstat_ent *mdstat,
goto disappeared;
if (st->devnm[0] == 0)
- strcpy(st->devnm, fd2devnm(fd));
+ snprintf(st->devnm, MD_NAME_MAX, "%s", fd2devnm(fd));
for (mse2 = mdstat; mse2; mse2 = mse2->next)
if (strcmp(mse2->devnm, st->devnm) == 0) {
@@ -684,7 +676,7 @@ static int check_array(struct state *st, struct mdstat_ent *mdstat,
strncmp(mse->metadata_version, "external:", 9) == 0 &&
is_subarray(mse->metadata_version+9)) {
char *sl;
- strcpy(st->parent_devnm, mse->metadata_version + 10);
+ snprintf(st->parent_devnm, MD_NAME_MAX, "%s", mse->metadata_version + 10);
sl = strchr(st->parent_devnm, '/');
if (sl)
*sl = 0;
@@ -772,14 +764,13 @@ static int add_new_arrays(struct mdstat_ent *mdstat, struct state **statelist,
continue;
}
- st->devname = xstrdup(name);
+ snprintf(st->devname, MD_NAME_MAX + sizeof("/dev/md/"), "%s", name);
if ((fd = open(st->devname, O_RDONLY)) < 0 ||
md_get_array_info(fd, &array) < 0) {
/* no such array */
if (fd >= 0)
close(fd);
put_md_name(st->devname);
- free(st->devname);
if (st->metadata) {
st->metadata->ss->free_super(st->metadata);
free(st->metadata);
@@ -791,7 +782,7 @@ static int add_new_arrays(struct mdstat_ent *mdstat, struct state **statelist,
st->next = *statelist;
st->err = 1;
st->from_auto = 1;
- strcpy(st->devnm, mse->devnm);
+ snprintf(st->devnm, MD_NAME_MAX, "%s", mse->devnm);
st->percent = RESYNC_UNKNOWN;
st->expected_spares = -1;
if (mse->metadata_version &&
@@ -799,8 +790,8 @@ static int add_new_arrays(struct mdstat_ent *mdstat, struct state **statelist,
"external:", 9) == 0 &&
is_subarray(mse->metadata_version+9)) {
char *sl;
- strcpy(st->parent_devnm,
- mse->metadata_version+10);
+ snprintf(st->parent_devnm, MD_NAME_MAX,
+ "%s", mse->metadata_version + 10);
sl = strchr(st->parent_devnm, '/');
*sl = 0;
} else
--
2.38.1

View File

@ -0,0 +1,42 @@
From 14ae4c37bce9a53da08d59d6c2d7e0946e9c9f47 Mon Sep 17 00:00:00 2001
From: Logan Gunthorpe <logang@deltatee.com>
Date: Wed, 22 Jun 2022 14:25:06 -0600
Subject: [PATCH 31/83] Makefile: Don't build static build with everything and
everything-test
Running the test suite requires building everything, but it seems to be
difficult to build the static version of mdadm now seeing there
is no readily available static udev library.
The test suite doesn't need the static binary so just don't build it
with the everything or everything-test targets.
Leave the mdadm.static and install-static targets in place in case
someone still has a use case for the static binary.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
Makefile | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Makefile b/Makefile
index bf126033..ec1f99ed 100644
--- a/Makefile
+++ b/Makefile
@@ -182,9 +182,9 @@ check_rundir:
echo "***** or set CHECK_RUN_DIR=0"; exit 1; \
fi
-everything: all mdadm.static swap_super test_stripe raid6check \
+everything: all swap_super test_stripe raid6check \
mdadm.Os mdadm.O2 man
-everything-test: all mdadm.static swap_super test_stripe \
+everything-test: all swap_super test_stripe \
mdadm.Os mdadm.O2 man
# mdadm.uclibc doesn't work on x86-64
# mdadm.tcc doesn't work..
--
2.38.1

View File

@ -0,0 +1,141 @@
From 679bd9508a30b2a0a1baecc9a21dd6c7d8d8d7dc Mon Sep 17 00:00:00 2001
From: Logan Gunthorpe <logang@deltatee.com>
Date: Wed, 22 Jun 2022 14:25:07 -0600
Subject: [PATCH 32/83] DDF: Cleanup validate_geometry_ddf_container()
Move the function up so that the function declaration is not necessary
and remove the unused arguments to the function.
No functional changes are intended but will help with a bug fix in the
next patch.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
super-ddf.c | 88 ++++++++++++++++++++++++-----------------------------
1 file changed, 39 insertions(+), 49 deletions(-)
diff --git a/super-ddf.c b/super-ddf.c
index abbc8b09..9d867f69 100644
--- a/super-ddf.c
+++ b/super-ddf.c
@@ -503,13 +503,6 @@ struct ddf_super {
static int load_super_ddf_all(struct supertype *st, int fd,
void **sbp, char *devname);
static int get_svd_state(const struct ddf_super *, const struct vcl *);
-static int
-validate_geometry_ddf_container(struct supertype *st,
- int level, int layout, int raiddisks,
- int chunk, unsigned long long size,
- unsigned long long data_offset,
- char *dev, unsigned long long *freesize,
- int verbose);
static int validate_geometry_ddf_bvd(struct supertype *st,
int level, int layout, int raiddisks,
@@ -3322,6 +3315,42 @@ static int reserve_space(struct supertype *st, int raiddisks,
return 1;
}
+static int
+validate_geometry_ddf_container(struct supertype *st,
+ int level, int raiddisks,
+ unsigned long long data_offset,
+ char *dev, unsigned long long *freesize,
+ int verbose)
+{
+ int fd;
+ unsigned long long ldsize;
+
+ if (level != LEVEL_CONTAINER)
+ return 0;
+ if (!dev)
+ return 1;
+
+ fd = dev_open(dev, O_RDONLY|O_EXCL);
+ if (fd < 0) {
+ if (verbose)
+ pr_err("ddf: Cannot open %s: %s\n",
+ dev, strerror(errno));
+ return 0;
+ }
+ if (!get_dev_size(fd, dev, &ldsize)) {
+ close(fd);
+ return 0;
+ }
+ close(fd);
+ if (freesize) {
+ *freesize = avail_size_ddf(st, ldsize >> 9, INVALID_SECTORS);
+ if (*freesize == 0)
+ return 0;
+ }
+
+ return 1;
+}
+
static int validate_geometry_ddf(struct supertype *st,
int level, int layout, int raiddisks,
int *chunk, unsigned long long size,
@@ -3347,11 +3376,9 @@ static int validate_geometry_ddf(struct supertype *st,
level = LEVEL_CONTAINER;
if (level == LEVEL_CONTAINER) {
/* Must be a fresh device to add to a container */
- return validate_geometry_ddf_container(st, level, layout,
- raiddisks, *chunk,
- size, data_offset, dev,
- freesize,
- verbose);
+ return validate_geometry_ddf_container(st, level, raiddisks,
+ data_offset, dev,
+ freesize, verbose);
}
if (!dev) {
@@ -3449,43 +3476,6 @@ static int validate_geometry_ddf(struct supertype *st,
return 1;
}
-static int
-validate_geometry_ddf_container(struct supertype *st,
- int level, int layout, int raiddisks,
- int chunk, unsigned long long size,
- unsigned long long data_offset,
- char *dev, unsigned long long *freesize,
- int verbose)
-{
- int fd;
- unsigned long long ldsize;
-
- if (level != LEVEL_CONTAINER)
- return 0;
- if (!dev)
- return 1;
-
- fd = dev_open(dev, O_RDONLY|O_EXCL);
- if (fd < 0) {
- if (verbose)
- pr_err("ddf: Cannot open %s: %s\n",
- dev, strerror(errno));
- return 0;
- }
- if (!get_dev_size(fd, dev, &ldsize)) {
- close(fd);
- return 0;
- }
- close(fd);
- if (freesize) {
- *freesize = avail_size_ddf(st, ldsize >> 9, INVALID_SECTORS);
- if (*freesize == 0)
- return 0;
- }
-
- return 1;
-}
-
static int validate_geometry_ddf_bvd(struct supertype *st,
int level, int layout, int raiddisks,
int *chunk, unsigned long long size,
--
2.38.1

View File

@ -0,0 +1,49 @@
From 2b93288a5650bb811932836f67f30d63c5ddcfbd Mon Sep 17 00:00:00 2001
From: Logan Gunthorpe <logang@deltatee.com>
Date: Wed, 22 Jun 2022 14:25:08 -0600
Subject: [PATCH 33/83] DDF: Fix NULL pointer dereference in
validate_geometry_ddf()
A relatively recent patch added a call to validate_geometry() in
Manage_add() that has level=LEVEL_CONTAINER and chunk=NULL.
This causes some ddf tests to segfault which aborts the test suite.
To fix this, avoid dereferencing chunk when the level is
LEVEL_CONTAINER or LEVEL_NONE.
Fixes: 1f5d54a06df0 ("Manage: Call validate_geometry when adding drive to external container")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
super-ddf.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/super-ddf.c b/super-ddf.c
index 9d867f69..949e7d15 100644
--- a/super-ddf.c
+++ b/super-ddf.c
@@ -3369,9 +3369,6 @@ static int validate_geometry_ddf(struct supertype *st,
* If given BVDs, we make an SVD, changing all the GUIDs in the process.
*/
- if (*chunk == UnSet)
- *chunk = DEFAULT_CHUNK;
-
if (level == LEVEL_NONE)
level = LEVEL_CONTAINER;
if (level == LEVEL_CONTAINER) {
@@ -3381,6 +3378,9 @@ static int validate_geometry_ddf(struct supertype *st,
freesize, verbose);
}
+ if (*chunk == UnSet)
+ *chunk = DEFAULT_CHUNK;
+
if (!dev) {
mdu_array_info_t array = {
.level = level,
--
2.38.1

View File

@ -0,0 +1,85 @@
From 548e9b916f86c06e2cdb50d8f49633f9bec66c7e Mon Sep 17 00:00:00 2001
From: Logan Gunthorpe <logang@deltatee.com>
Date: Wed, 22 Jun 2022 14:25:09 -0600
Subject: [PATCH 34/83] mdadm/Grow: Fix use after close bug by closing after
fork
The test 07reshape-grow fails most of the time. But it succeeds around
1 in 5 times. When it does succeed, it causes the tests to die because
mdadm has segfaulted.
The segfault was caused by mdadm attempting to repoen a file
descriptor that was already closed. The backtrace of the segfault
was:
#0 __strncmp_avx2 () at ../sysdeps/x86_64/multiarch/strcmp-avx2.S:101
#1 0x000056146e31d44b in devnm2devid (devnm=0x0) at util.c:956
#2 0x000056146e31dab4 in open_dev_flags (devnm=0x0, flags=0)
at util.c:1072
#3 0x000056146e31db22 in open_dev (devnm=0x0) at util.c:1079
#4 0x000056146e3202e8 in reopen_mddev (mdfd=4) at util.c:2244
#5 0x000056146e329f36 in start_array (mdfd=4,
mddev=0x7ffc55342450 "/dev/md0", content=0x7ffc55342860,
st=0x56146fc78660, ident=0x7ffc55342f70, best=0x56146fc6f5d0,
bestcnt=10, chosen_drive=0, devices=0x56146fc706b0, okcnt=5,
sparecnt=0, rebuilding_cnt=0, journalcnt=0, c=0x7ffc55342e90,
clean=1, avail=0x56146fc78720 "\001\001\001\001\001",
start_partial_ok=0, err_ok=0, was_forced=0)
at Assemble.c:1206
#6 0x000056146e32c36e in Assemble (st=0x56146fc78660,
mddev=0x7ffc55342450 "/dev/md0", ident=0x7ffc55342f70,
devlist=0x56146fc6e2d0, c=0x7ffc55342e90)
at Assemble.c:1914
#7 0x000056146e312ac9 in main (argc=11, argv=0x7ffc55343238)
at mdadm.c:1510
The file descriptor was closed early in Grow_continue(). The noted commit
moved the close() call to close the fd above the fork which caused the
parent process to return with a closed fd.
This meant reshape_array() and Grow_continue() would return in the parent
with the fd forked. The fd would eventually be passed to reopen_mddev()
which returned an unhandled NULL from fd2devnm() which would then be
dereferenced in devnm2devid.
Fix this by moving the close() call below the fork. This appears to
fix the 07revert-grow test. While we're at it, switch to using
close_fd() to invalidate the file descriptor.
Fixes: 77b72fa82813 ("mdadm/Grow: prevent md's fd from being occupied during delayed time")
Cc: Alex Wu <alexwu@synology.com>
Cc: BingJing Chang <bingjingc@synology.com>
Cc: Danny Shih <dannyshih@synology.com>
Cc: ChangSyun Peng <allenpeng@synology.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
Grow.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Grow.c b/Grow.c
index 8c520d42..97f22c75 100644
--- a/Grow.c
+++ b/Grow.c
@@ -3514,7 +3514,6 @@ started:
return 0;
}
- close(fd);
/* Now we just need to kick off the reshape and watch, while
* handling backups of the data...
* This is all done by a forked background process.
@@ -3535,6 +3534,9 @@ started:
break;
}
+ /* Close unused file descriptor in the forked process */
+ close_fd(&fd);
+
/* If another array on the same devices is busy, the
* reshape will wait for them. This would mean that
* the first section that we suspend will stay suspended
--
2.38.1

View File

@ -0,0 +1,36 @@
From 9ae62977b51dab0f4bb46b1c8ea5ebd1705b2f4d Mon Sep 17 00:00:00 2001
From: Logan Gunthorpe <logang@deltatee.com>
Date: Wed, 22 Jun 2022 14:25:10 -0600
Subject: [PATCH 35/83] monitor: Avoid segfault when calling NULL
get_bad_blocks
Not all struct superswitch implement a get_bad_blocks() function,
yet mdmon seems to call it without checking for NULL and thus
occasionally segfaults in the test 10ddf-geometry.
Fix this by checking for NULL before calling it.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
monitor.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/monitor.c b/monitor.c
index b877e595..820a93d0 100644
--- a/monitor.c
+++ b/monitor.c
@@ -311,6 +311,9 @@ static int check_for_cleared_bb(struct active_array *a, struct mdinfo *mdi)
struct md_bb *bb;
int i;
+ if (!ss->get_bad_blocks)
+ return -1;
+
/*
* Get a list of bad blocks for an array, then read list of
* acknowledged bad blocks from kernel and compare it against metadata
--
2.38.1

View File

@ -0,0 +1,78 @@
From 6c9d9260633f2c8491985b0782cf0fbd7e51651b Mon Sep 17 00:00:00 2001
From: Logan Gunthorpe <logang@deltatee.com>
Date: Wed, 22 Jun 2022 14:25:11 -0600
Subject: [PATCH 36/83] mdadm: Fix mdadm -r remove option regression
The commit noted below globally adds a parameter to the -r option but missed
the fact that -r is used for another purpose: --remove.
After that commit, a command such as:
mdadm /dev/md0 -r /dev/loop0
will do nothing seeing the device parameter will be consumed as a
argument to the -r option; thus, there will only be one device
seen one the command line, devs_found will only be 1 and nothing will
happen.
This caused the 01r5integ and 01raid6integ tests to hang indefinitely
as mdadm did not remove the failed device. With the device not removed,
it would not be readded. Then the loop waiting for the array status to
change would loop forever.
This commit was recently reverted, but the legitimate fix for the
monitor operations was still not fixed. So add specific monitor
short ops to re-fix the --monitor -r option.
Fixes: 546047688e1c ("mdadm: fix coredump of mdadm --monitor -r")
Fixes: 190dc029b141 ("Revert "mdadm: fix coredump of mdadm --monitor -r"")
Cc: Wu Guanghao <wuguanghao3@huawei.com>
Cc: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
ReadMe.c | 1 +
mdadm.c | 1 +
mdadm.h | 1 +
3 files changed, 3 insertions(+)
diff --git a/ReadMe.c b/ReadMe.c
index bec1be9a..7518a32a 100644
--- a/ReadMe.c
+++ b/ReadMe.c
@@ -82,6 +82,7 @@ char Version[] = "mdadm - v" VERSION " - " VERS_DATE EXTRAVERSION "\n";
*/
char short_options[]="-ABCDEFGIQhVXYWZ:vqbc:i:l:p:m:n:x:u:c:d:z:U:N:sarfRSow1tye:k:";
+char short_monitor_options[]="-ABCDEFGIQhVXYWZ:vqbc:i:l:p:m:r:n:x:u:c:d:z:U:N:safRSow1tye:k:";
char short_bitmap_options[]=
"-ABCDEFGIQhVXYWZ:vqb:c:i:l:p:m:n:x:u:c:d:z:U:N:sarfRSow1tye:k:";
char short_bitmap_auto_options[]=
diff --git a/mdadm.c b/mdadm.c
index be40686c..d0c5e6de 100644
--- a/mdadm.c
+++ b/mdadm.c
@@ -227,6 +227,7 @@ int main(int argc, char *argv[])
shortopt = short_bitmap_auto_options;
break;
case 'F': newmode = MONITOR;
+ shortopt = short_monitor_options;
break;
case 'G': newmode = GROW;
shortopt = short_bitmap_options;
diff --git a/mdadm.h b/mdadm.h
index 974415b9..163f4a49 100644
--- a/mdadm.h
+++ b/mdadm.h
@@ -419,6 +419,7 @@ enum mode {
};
extern char short_options[];
+extern char short_monitor_options[];
extern char short_bitmap_options[];
extern char short_bitmap_auto_options[];
extern struct option long_options[];
--
2.38.1

View File

@ -0,0 +1,42 @@
From 41edf6f45895193f4a523cb0a08d639c9ff9ccc9 Mon Sep 17 00:00:00 2001
From: Logan Gunthorpe <logang@deltatee.com>
Date: Wed, 22 Jun 2022 14:25:12 -0600
Subject: [PATCH 37/83] mdadm: Fix optional --write-behind parameter
The commit noted below changed the behaviour of --write-behind to
require an argument. This broke the 06wrmostly test with the error:
mdadm: Invalid value for maximum outstanding write-behind writes: (null).
Must be between 0 and 16383.
To fix this, check if optarg is NULL before parising it, as the origial
code did.
Fixes: 60815698c0ac ("Refactor parse_num and use it to parse optarg.")
Cc: Mateusz Grzonka <mateusz.grzonka@intel.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
mdadm.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/mdadm.c b/mdadm.c
index d0c5e6de..56722ed9 100644
--- a/mdadm.c
+++ b/mdadm.c
@@ -1201,8 +1201,9 @@ int main(int argc, char *argv[])
case O(BUILD, WriteBehind):
case O(CREATE, WriteBehind):
s.write_behind = DEFAULT_MAX_WRITE_BEHIND;
- if (parse_num(&s.write_behind, optarg) != 0 ||
- s.write_behind < 0 || s.write_behind > 16383) {
+ if (optarg &&
+ (parse_num(&s.write_behind, optarg) != 0 ||
+ s.write_behind < 0 || s.write_behind > 16383)) {
pr_err("Invalid value for maximum outstanding write-behind writes: %s.\n\tMust be between 0 and 16383.\n",
optarg);
exit(2);
--
2.38.1

View File

@ -0,0 +1,38 @@
From 7539254342bc591717b0051734cc6c09c1b88640 Mon Sep 17 00:00:00 2001
From: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Date: Wed, 22 Jun 2022 14:25:13 -0600
Subject: [PATCH 38/83] tests/00raid0: add a test that validates raid0 with
layout fails for 0.9
329dfc28debb disallows the creation of raid0 with layouts for 0.9
metadata. This test confirms the new behavior.
Signed-off-by: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
tests/00raid0 | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/tests/00raid0 b/tests/00raid0
index 8bc18985..e6b21cc4 100644
--- a/tests/00raid0
+++ b/tests/00raid0
@@ -6,11 +6,9 @@ check raid0
testdev $md0 3 $mdsize2_l 512
mdadm -S $md0
-# now with version-0.90 superblock
+# verify raid0 with layouts fail for 0.90
mdadm -CR $md0 -e0.90 -l0 -n4 $dev0 $dev1 $dev2 $dev3
-check raid0
-testdev $md0 4 $mdsize0 512
-mdadm -S $md0
+check opposite_result
# now with no superblock
mdadm -B $md0 -l0 -n5 $dev0 $dev1 $dev2 $dev3 $dev4
--
2.38.1

View File

@ -0,0 +1,99 @@
From 14c2161edb77d7294199e8aa7daa9f9d1d0ad5d7 Mon Sep 17 00:00:00 2001
From: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Date: Wed, 22 Jun 2022 14:25:14 -0600
Subject: [PATCH 39/83] tests: fix raid0 tests for 0.90 metadata
Some of the test cases fail because raid0 creation fails with the error,
"0.90 metadata does not support layouts for RAID0" added by commit,
329dfc28debb. Fix some of the test cases by switching from raid0 to
linear level for 0.9 metadata where possible.
Signed-off-by: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
tests/00raid0 | 4 ++--
tests/00readonly | 4 ++++
tests/03r0assem | 6 +++---
tests/04r0update | 4 ++--
tests/04update-metadata | 2 +-
5 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/tests/00raid0 b/tests/00raid0
index e6b21cc4..9b8896cb 100644
--- a/tests/00raid0
+++ b/tests/00raid0
@@ -20,8 +20,8 @@ mdadm -S $md0
# now same again with different chunk size
for chunk in 4 32 256
do
- mdadm -CR $md0 -e0.90 -l raid0 --chunk $chunk -n3 $dev0 $dev1 $dev2
- check raid0
+ mdadm -CR $md0 -e0.90 -l linear --chunk $chunk -n3 $dev0 $dev1 $dev2
+ check linear
testdev $md0 3 $mdsize0 $chunk
mdadm -S $md0
diff --git a/tests/00readonly b/tests/00readonly
index 28b0fa13..39202487 100644
--- a/tests/00readonly
+++ b/tests/00readonly
@@ -4,6 +4,10 @@ for metadata in 0.9 1.0 1.1 1.2
do
for level in linear raid0 raid1 raid4 raid5 raid6 raid10
do
+ if [[ $metadata == "0.9" && $level == "raid0" ]];
+ then
+ continue
+ fi
mdadm -CR $md0 -l $level -n 4 --metadata=$metadata \
$dev1 $dev2 $dev3 $dev4 --assume-clean
check nosync
diff --git a/tests/03r0assem b/tests/03r0assem
index 6744e322..44df0645 100644
--- a/tests/03r0assem
+++ b/tests/03r0assem
@@ -68,9 +68,9 @@ mdadm -S $md2
### Now for version 0...
mdadm --zero-superblock $dev0 $dev1 $dev2
-mdadm -CR $md2 -l0 --metadata=0.90 -n3 $dev0 $dev1 $dev2
-check raid0
-tst="testdev $md2 3 $mdsize0 512"
+mdadm -CR $md2 -llinear --metadata=0.90 -n3 $dev0 $dev1 $dev2
+check linear
+tst="testdev $md2 3 $mdsize0 1"
$tst
uuid=`mdadm -Db $md2 | sed 's/.*UUID=//'`
diff --git a/tests/04r0update b/tests/04r0update
index 73ee3b9f..b95efb06 100644
--- a/tests/04r0update
+++ b/tests/04r0update
@@ -1,7 +1,7 @@
# create a raid0, re-assemble with a different super-minor
-mdadm -CR -e 0.90 $md0 -l0 -n3 $dev0 $dev1 $dev2
-testdev $md0 3 $mdsize0 512
+mdadm -CR -e 0.90 $md0 -llinear -n3 $dev0 $dev1 $dev2
+testdev $md0 3 $mdsize0 1
minor1=`mdadm -E $dev0 | sed -n -e 's/.*Preferred Minor : //p'`
mdadm -S /dev/md0
diff --git a/tests/04update-metadata b/tests/04update-metadata
index 232fc1ff..08c14af7 100644
--- a/tests/04update-metadata
+++ b/tests/04update-metadata
@@ -8,7 +8,7 @@ set -xe
dlist="$dev0 $dev1 $dev2 $dev3"
-for ls in raid0/4 linear/4 raid1/1 raid5/3 raid6/2
+for ls in linear/4 raid1/1 raid5/3 raid6/2
do
s=${ls#*/} l=${ls%/*}
mdadm -CR --assume-clean -e 0.90 $md0 --level $l -n 4 -c 64 $dlist
--
2.38.1

View File

@ -0,0 +1,39 @@
From de045db607b1ac4b70fc2a8878463e029c2ab1dc Mon Sep 17 00:00:00 2001
From: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Date: Wed, 22 Jun 2022 14:25:15 -0600
Subject: [PATCH 40/83] tests/04update-metadata: avoid passing chunk size to
raid1
'04update-metadata' test fails with error, "specifying chunk size is
forbidden for this level" added by commit, 5b30a34aa4b5e. Hence,
correcting the test to ignore passing chunk size to raid1.
Signed-off-by: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@oracle.com>
[logang@deltatee.com: fix if/then style and dropped unrelated hunk]
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
tests/04update-metadata | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/tests/04update-metadata b/tests/04update-metadata
index 08c14af7..2b72a303 100644
--- a/tests/04update-metadata
+++ b/tests/04update-metadata
@@ -11,7 +11,11 @@ dlist="$dev0 $dev1 $dev2 $dev3"
for ls in linear/4 raid1/1 raid5/3 raid6/2
do
s=${ls#*/} l=${ls%/*}
- mdadm -CR --assume-clean -e 0.90 $md0 --level $l -n 4 -c 64 $dlist
+ if [[ $l == 'raid1' ]]; then
+ mdadm -CR --assume-clean -e 0.90 $md0 --level $l -n 4 $dlist
+ else
+ mdadm -CR --assume-clean -e 0.90 $md0 --level $l -n 4 -c 64 $dlist
+ fi
testdev $md0 $s 19904 64
mdadm -S $md0
mdadm -A $md0 --update=metadata $dlist
--
2.38.1

View File

@ -0,0 +1,31 @@
From a2c832465fc75202e244327b2081231dfa974617 Mon Sep 17 00:00:00 2001
From: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Date: Wed, 22 Jun 2022 14:25:16 -0600
Subject: [PATCH 41/83] tests/02lineargrow: clear the superblock at every
iteration
This fixes 02lineargrow test as prior metadata causes --add operation
to misbehave.
Signed-off-by: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
tests/02lineargrow | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tests/02lineargrow b/tests/02lineargrow
index e05c219d..595bf9f2 100644
--- a/tests/02lineargrow
+++ b/tests/02lineargrow
@@ -20,4 +20,6 @@ do
testdev $md0 3 $sz 1
mdadm -S $md0
+ mdadm --zero /dev/loop2
+ mdadm --zero /dev/loop3
done
--
2.38.1

View File

@ -0,0 +1,88 @@
From a7bfcc716e235664dfb3b6c5a9590273e611ac72 Mon Sep 17 00:00:00 2001
From: Logan Gunthorpe <logang@deltatee.com>
Date: Wed, 22 Jun 2022 14:25:17 -0600
Subject: [PATCH 42/83] mdadm/test: Add a mode to repeat specified tests
Many tests fail infrequently or rarely. To help find these, add
an option to run the tests multiple times by specifying --loop=N.
If --loop=0 is specified, the test will be looped forever.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
test | 36 ++++++++++++++++++++++++------------
1 file changed, 24 insertions(+), 12 deletions(-)
diff --git a/test b/test
index 711a3c7a..da6db5e0 100755
--- a/test
+++ b/test
@@ -10,6 +10,7 @@ devlist=
savelogs=0
exitonerror=1
+loop=1
prefix='[0-9][0-9]'
# use loop devices by default if doesn't specify --dev
@@ -117,6 +118,7 @@ do_help() {
--logdir=directory Directory to save all logfiles in
--save-logs Usually use with --logdir together
--keep-going | --no-error Don't stop on error, ie. run all tests
+ --loop=N Run tests N times (0 to run forever)
--dev=loop|lvm|ram|disk Use loop devices (default), LVM, RAM or disk
--disks= Provide a bunch of physical devices for test
--volgroup=name LVM volume group for LVM test
@@ -211,6 +213,9 @@ parse_args() {
--keep-going | --no-error )
exitonerror=0
;;
+ --loop=* )
+ loop="${i##*=}"
+ ;;
--disable-multipath )
unset MULTIPATH
;;
@@ -263,19 +268,26 @@ main() {
echo "Testing on linux-$(uname -r) kernel"
[ "$savelogs" == "1" ] &&
echo "Saving logs to $logdir"
- if [ "x$TESTLIST" != "x" ]
- then
- for script in ${TESTLIST[@]}
- do
- do_test $testdir/$script
- done
- else
- for script in $testdir/$prefix $testdir/$prefix*[^~]
- do
- do_test $script
- done
- fi
+ while true; do
+ if [ "x$TESTLIST" != "x" ]
+ then
+ for script in ${TESTLIST[@]}
+ do
+ do_test $testdir/$script
+ done
+ else
+ for script in $testdir/$prefix $testdir/$prefix*[^~]
+ do
+ do_test $script
+ done
+ fi
+
+ let loop=$loop-1
+ if [ "$loop" == "0" ]; then
+ break
+ fi
+ done
exit 0
}
--
2.38.1

View File

@ -0,0 +1,120 @@
From 28520bf114b3b0515a48ff44fff4ecbe9ed6dfad Mon Sep 17 00:00:00 2001
From: Logan Gunthorpe <logang@deltatee.com>
Date: Wed, 22 Jun 2022 14:25:18 -0600
Subject: [PATCH 43/83] mdadm/test: Mark and ignore broken test failures
Add functionality to continue if a test marked as broken fails.
To mark a test as broken, a file with the same name but with the suffix
'.broken' should exist. The first line in the file will be printed with
a KNOWN BROKEN message; the rest of the file can describe the how the
test is broken.
Also adds --skip-broken and --skip-always-broken to skip all the tests
that have a .broken file or to skip all tests whose .broken file's first
line contains the keyword always.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
test | 37 +++++++++++++++++++++++++++++++++++--
1 file changed, 35 insertions(+), 2 deletions(-)
diff --git a/test b/test
index da6db5e0..61d9ee83 100755
--- a/test
+++ b/test
@@ -10,6 +10,8 @@ devlist=
savelogs=0
exitonerror=1
+ctrl_c_error=0
+skipbroken=0
loop=1
prefix='[0-9][0-9]'
@@ -36,6 +38,7 @@ die() {
ctrl_c() {
exitonerror=1
+ ctrl_c_error=1
}
# mdadm always adds --quiet, and we want to see any unexpected messages
@@ -80,8 +83,21 @@ mdadm() {
do_test() {
_script=$1
_basename=`basename $_script`
+ _broken=0
+
if [ -f "$_script" ]
then
+ if [ -f "${_script}.broken" ]; then
+ _broken=1
+ _broken_msg=$(head -n1 "${_script}.broken" | tr -d '\n')
+ if [ "$skipbroken" == "all" ]; then
+ return
+ elif [ "$skipbroken" == "always" ] &&
+ [[ "$_broken_msg" == *always* ]]; then
+ return
+ fi
+ fi
+
rm -f $targetdir/stderr
# this might have been reset: restore the default.
echo 2000 > /proc/sys/dev/raid/speed_limit_max
@@ -98,10 +114,15 @@ do_test() {
else
save_log fail
_fail=1
+ if [ "$_broken" == "1" ]; then
+ echo " (KNOWN BROKEN TEST: $_broken_msg)"
+ fi
fi
[ "$savelogs" == "1" ] &&
mv -f $targetdir/log $logdir/$_basename.log
- [ "$_fail" == "1" -a "$exitonerror" == "1" ] && exit 1
+ [ "$ctrl_c_error" == "1" ] && exit 1
+ [ "$_fail" == "1" -a "$exitonerror" == "1" \
+ -a "$_broken" == "0" ] && exit 1
fi
}
@@ -119,6 +140,8 @@ do_help() {
--save-logs Usually use with --logdir together
--keep-going | --no-error Don't stop on error, ie. run all tests
--loop=N Run tests N times (0 to run forever)
+ --skip-broken Skip tests that are known to be broken
+ --skip-always-broken Skip tests that are known to always fail
--dev=loop|lvm|ram|disk Use loop devices (default), LVM, RAM or disk
--disks= Provide a bunch of physical devices for test
--volgroup=name LVM volume group for LVM test
@@ -216,6 +239,12 @@ parse_args() {
--loop=* )
loop="${i##*=}"
;;
+ --skip-broken )
+ skipbroken=all
+ ;;
+ --skip-always-broken )
+ skipbroken=always
+ ;;
--disable-multipath )
unset MULTIPATH
;;
@@ -279,7 +308,11 @@ main() {
else
for script in $testdir/$prefix $testdir/$prefix*[^~]
do
- do_test $script
+ case $script in
+ *.broken) ;;
+ *)
+ do_test $script
+ esac
done
fi
--
2.38.1

View File

@ -0,0 +1,447 @@
From daa86d6634761796ada1f535c13e47fdd3cc95eb Mon Sep 17 00:00:00 2001
From: Logan Gunthorpe <logang@deltatee.com>
Date: Wed, 22 Jun 2022 14:25:19 -0600
Subject: [PATCH 44/83] tests: Add broken files for all broken tests
Each broken file contains the rough frequency of brokeness as well
as a brief explanation of what happens when it breaks. Estimates
of failure rates are not statistically significant and can vary
run to run.
This is really just a view from my window. Tests were done on a
small VM with the default loop devices, not real hardware. We've
seen different kernel configurations can cause bugs to appear as well
(ie. different block schedulers). It may also be that different race
conditions will be seen on machines with different performance
characteristics.
These annotations were done with the kernel currently in md/md-next:
facef3b96c5b ("md: Notify sysfs sync_completed in md_reap_sync_thread()")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
tests/01r5integ.broken | 7 ++++
tests/01raid6integ.broken | 7 ++++
tests/04r5swap.broken | 7 ++++
tests/07autoassemble.broken | 8 ++++
tests/07autodetect.broken | 5 +++
tests/07changelevelintr.broken | 9 +++++
tests/07changelevels.broken | 9 +++++
tests/07reshape5intr.broken | 45 ++++++++++++++++++++++
tests/07revert-grow.broken | 31 +++++++++++++++
tests/07revert-shrink.broken | 9 +++++
tests/07testreshape5.broken | 12 ++++++
tests/09imsm-assemble.broken | 6 +++
tests/09imsm-create-fail-rebuild.broken | 5 +++
tests/09imsm-overlap.broken | 7 ++++
tests/10ddf-assemble-missing.broken | 6 +++
tests/10ddf-fail-create-race.broken | 7 ++++
tests/10ddf-fail-two-spares.broken | 5 +++
tests/10ddf-incremental-wrong-order.broken | 9 +++++
tests/14imsm-r1_2d-grow-r1_3d.broken | 5 +++
tests/14imsm-r1_2d-takeover-r0_2d.broken | 6 +++
tests/18imsm-r10_4d-takeover-r0_2d.broken | 5 +++
tests/18imsm-r1_2d-takeover-r0_1d.broken | 6 +++
tests/19raid6auto-repair.broken | 5 +++
tests/19raid6repair.broken | 5 +++
24 files changed, 226 insertions(+)
create mode 100644 tests/01r5integ.broken
create mode 100644 tests/01raid6integ.broken
create mode 100644 tests/04r5swap.broken
create mode 100644 tests/07autoassemble.broken
create mode 100644 tests/07autodetect.broken
create mode 100644 tests/07changelevelintr.broken
create mode 100644 tests/07changelevels.broken
create mode 100644 tests/07reshape5intr.broken
create mode 100644 tests/07revert-grow.broken
create mode 100644 tests/07revert-shrink.broken
create mode 100644 tests/07testreshape5.broken
create mode 100644 tests/09imsm-assemble.broken
create mode 100644 tests/09imsm-create-fail-rebuild.broken
create mode 100644 tests/09imsm-overlap.broken
create mode 100644 tests/10ddf-assemble-missing.broken
create mode 100644 tests/10ddf-fail-create-race.broken
create mode 100644 tests/10ddf-fail-two-spares.broken
create mode 100644 tests/10ddf-incremental-wrong-order.broken
create mode 100644 tests/14imsm-r1_2d-grow-r1_3d.broken
create mode 100644 tests/14imsm-r1_2d-takeover-r0_2d.broken
create mode 100644 tests/18imsm-r10_4d-takeover-r0_2d.broken
create mode 100644 tests/18imsm-r1_2d-takeover-r0_1d.broken
create mode 100644 tests/19raid6auto-repair.broken
create mode 100644 tests/19raid6repair.broken
diff --git a/tests/01r5integ.broken b/tests/01r5integ.broken
new file mode 100644
index 00000000..20737637
--- /dev/null
+++ b/tests/01r5integ.broken
@@ -0,0 +1,7 @@
+fails rarely
+
+Fails about 1 in every 30 runs with a sha mismatch error:
+
+ c49ab26e1b01def7874af9b8a6d6d0c29fdfafe6 /dev/md0 does not match
+ 15dc2f73262f811ada53c65e505ceec9cf025cb9 /dev/md0 with /dev/loop3
+ missing
diff --git a/tests/01raid6integ.broken b/tests/01raid6integ.broken
new file mode 100644
index 00000000..1df735f0
--- /dev/null
+++ b/tests/01raid6integ.broken
@@ -0,0 +1,7 @@
+fails infrequently
+
+Fails about 1 in 5 with a sha mismatch:
+
+ 8286c2bc045ae2cfe9f8b7ae3a898fa25db6926f /dev/md0 does not match
+ a083a0738b58caab37fd568b91b177035ded37df /dev/md0 with /dev/loop2 and
+ /dev/loop3 missing
diff --git a/tests/04r5swap.broken b/tests/04r5swap.broken
new file mode 100644
index 00000000..e38987db
--- /dev/null
+++ b/tests/04r5swap.broken
@@ -0,0 +1,7 @@
+always fails
+
+Fails with errors:
+
+ mdadm: /dev/loop0 has no superblock - assembly aborted
+
+ ERROR: no recovery happening
diff --git a/tests/07autoassemble.broken b/tests/07autoassemble.broken
new file mode 100644
index 00000000..8be09407
--- /dev/null
+++ b/tests/07autoassemble.broken
@@ -0,0 +1,8 @@
+always fails
+
+Prints lots of messages, but the array doesn't assemble. Error
+possibly related to:
+
+ mdadm: /dev/md/1 is busy - skipping
+ mdadm: no recogniseable superblock on /dev/md/testing:0
+ mdadm: /dev/md/2 is busy - skipping
diff --git a/tests/07autodetect.broken b/tests/07autodetect.broken
new file mode 100644
index 00000000..294954a1
--- /dev/null
+++ b/tests/07autodetect.broken
@@ -0,0 +1,5 @@
+always fails
+
+Fails with error:
+
+ ERROR: no resync happening
diff --git a/tests/07changelevelintr.broken b/tests/07changelevelintr.broken
new file mode 100644
index 00000000..284b4906
--- /dev/null
+++ b/tests/07changelevelintr.broken
@@ -0,0 +1,9 @@
+always fails
+
+Fails with errors:
+
+ mdadm: this change will reduce the size of the array.
+ use --grow --array-size first to truncate array.
+ e.g. mdadm --grow /dev/md0 --array-size 56832
+
+ ERROR: no reshape happening
diff --git a/tests/07changelevels.broken b/tests/07changelevels.broken
new file mode 100644
index 00000000..9b930d93
--- /dev/null
+++ b/tests/07changelevels.broken
@@ -0,0 +1,9 @@
+always fails
+
+Fails with errors:
+
+ mdadm: /dev/loop0 is smaller than given size. 18976K < 19968K + metadata
+ mdadm: /dev/loop1 is smaller than given size. 18976K < 19968K + metadata
+ mdadm: /dev/loop2 is smaller than given size. 18976K < 19968K + metadata
+
+ ERROR: /dev/md0 isn't a block device.
diff --git a/tests/07reshape5intr.broken b/tests/07reshape5intr.broken
new file mode 100644
index 00000000..efe52a66
--- /dev/null
+++ b/tests/07reshape5intr.broken
@@ -0,0 +1,45 @@
+always fails
+
+This patch, recently added to md-next causes the test to always fail:
+
+7e6ba434cc60 ("md: don't unregister sync_thread with reconfig_mutex
+held")
+
+The new error is simply:
+
+ ERROR: no reshape happening
+
+Before the patch, the error seen is below.
+
+--
+
+fails infrequently
+
+Fails roughly 1 in 4 runs with errors:
+
+ mdadm: Merging with already-assembled /dev/md/0
+ mdadm: cannot re-read metadata from /dev/loop6 - aborting
+
+ ERROR: no reshape happening
+
+Also have seen a random deadlock:
+
+ INFO: task mdadm:109702 blocked for more than 30 seconds.
+ Not tainted 5.18.0-rc3-eid-vmlocalyes-dbg-00095-g3c2b5427979d #2040
+ "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
+ task:mdadm state:D stack: 0 pid:109702 ppid: 1 flags:0x00004000
+ Call Trace:
+ <TASK>
+ __schedule+0x67e/0x13b0
+ schedule+0x82/0x110
+ mddev_suspend+0x2e1/0x330
+ suspend_lo_store+0xbd/0x140
+ md_attr_store+0xcb/0x130
+ sysfs_kf_write+0x89/0xb0
+ kernfs_fop_write_iter+0x202/0x2c0
+ new_sync_write+0x222/0x330
+ vfs_write+0x3bc/0x4d0
+ ksys_write+0xd9/0x180
+ __x64_sys_write+0x43/0x50
+ do_syscall_64+0x3b/0x90
+ entry_SYSCALL_64_after_hwframe+0x44/0xae
diff --git a/tests/07revert-grow.broken b/tests/07revert-grow.broken
new file mode 100644
index 00000000..9b6db86f
--- /dev/null
+++ b/tests/07revert-grow.broken
@@ -0,0 +1,31 @@
+always fails
+
+This patch, recently added to md-next causes the test to always fail:
+
+7e6ba434cc60 ("md: don't unregister sync_thread with reconfig_mutex held")
+
+The errors are:
+
+ mdadm: No active reshape to revert on /dev/loop0
+ ERROR: active raid5 not found
+
+Before the patch, the error seen is below.
+
+--
+
+fails rarely
+
+Fails about 1 in every 30 runs with errors:
+
+ mdadm: Merging with already-assembled /dev/md/0
+ mdadm: backup file /tmp/md-backup inaccessible: No such file or directory
+ mdadm: failed to add /dev/loop1 to /dev/md/0: Invalid argument
+ mdadm: failed to add /dev/loop2 to /dev/md/0: Invalid argument
+ mdadm: failed to add /dev/loop3 to /dev/md/0: Invalid argument
+ mdadm: failed to add /dev/loop0 to /dev/md/0: Invalid argument
+ mdadm: /dev/md/0 assembled from 1 drive - need all 5 to start it
+ (use --run to insist).
+
+ grep: /sys/block/md*/md/sync_action: No such file or directory
+
+ ERROR: active raid5 not found
diff --git a/tests/07revert-shrink.broken b/tests/07revert-shrink.broken
new file mode 100644
index 00000000..c33c39ec
--- /dev/null
+++ b/tests/07revert-shrink.broken
@@ -0,0 +1,9 @@
+always fails
+
+Fails with errors:
+
+ mdadm: this change will reduce the size of the array.
+ use --grow --array-size first to truncate array.
+ e.g. mdadm --grow /dev/md0 --array-size 53760
+
+ ERROR: active raid5 not found
diff --git a/tests/07testreshape5.broken b/tests/07testreshape5.broken
new file mode 100644
index 00000000..a8ce03e4
--- /dev/null
+++ b/tests/07testreshape5.broken
@@ -0,0 +1,12 @@
+always fails
+
+Test seems to run 'test_stripe' at $dir directory, but $dir is never
+set. If $dir is adjusted to $PWD, the test still fails with:
+
+ mdadm: /dev/loop2 is not suitable for this array.
+ mdadm: create aborted
+ ++ return 1
+ ++ cmp -s -n 8192 /dev/md0 /tmp/RandFile
+ ++ echo cmp failed
+ cmp failed
+ ++ exit 2
diff --git a/tests/09imsm-assemble.broken b/tests/09imsm-assemble.broken
new file mode 100644
index 00000000..a6d4d5cf
--- /dev/null
+++ b/tests/09imsm-assemble.broken
@@ -0,0 +1,6 @@
+fails infrequently
+
+Fails roughly 1 in 10 runs with errors:
+
+ mdadm: /dev/loop2 is still in use, cannot remove.
+ /dev/loop2 removal from /dev/md/container should have succeeded
diff --git a/tests/09imsm-create-fail-rebuild.broken b/tests/09imsm-create-fail-rebuild.broken
new file mode 100644
index 00000000..40c4b294
--- /dev/null
+++ b/tests/09imsm-create-fail-rebuild.broken
@@ -0,0 +1,5 @@
+always fails
+
+Fails with error:
+
+ **Error**: Array size mismatch - expected 3072, actual 16384
diff --git a/tests/09imsm-overlap.broken b/tests/09imsm-overlap.broken
new file mode 100644
index 00000000..e7ccab76
--- /dev/null
+++ b/tests/09imsm-overlap.broken
@@ -0,0 +1,7 @@
+always fails
+
+Fails with errors:
+
+ **Error**: Offset mismatch - expected 15360, actual 0
+ **Error**: Offset mismatch - expected 15360, actual 0
+ /dev/md/vol3 failed check
diff --git a/tests/10ddf-assemble-missing.broken b/tests/10ddf-assemble-missing.broken
new file mode 100644
index 00000000..bfd8d103
--- /dev/null
+++ b/tests/10ddf-assemble-missing.broken
@@ -0,0 +1,6 @@
+always fails
+
+Fails with errors:
+
+ ERROR: /dev/md/vol0 has unexpected state on /dev/loop10
+ ERROR: unexpected number of online disks on /dev/loop10
diff --git a/tests/10ddf-fail-create-race.broken b/tests/10ddf-fail-create-race.broken
new file mode 100644
index 00000000..6c0df023
--- /dev/null
+++ b/tests/10ddf-fail-create-race.broken
@@ -0,0 +1,7 @@
+usually fails
+
+Fails about 9 out of 10 times with many errors:
+
+ mdadm: cannot open MISSING: No such file or directory
+ ERROR: non-degraded array found
+ ERROR: disk 0 not marked as failed in meta data
diff --git a/tests/10ddf-fail-two-spares.broken b/tests/10ddf-fail-two-spares.broken
new file mode 100644
index 00000000..eeea56d9
--- /dev/null
+++ b/tests/10ddf-fail-two-spares.broken
@@ -0,0 +1,5 @@
+fails infrequently
+
+Fails roughly 1 in 3 with error:
+
+ ERROR: /dev/md/vol1 should be optimal in meta data
diff --git a/tests/10ddf-incremental-wrong-order.broken b/tests/10ddf-incremental-wrong-order.broken
new file mode 100644
index 00000000..a5af3bab
--- /dev/null
+++ b/tests/10ddf-incremental-wrong-order.broken
@@ -0,0 +1,9 @@
+always fails
+
+Fails with errors:
+ ERROR: sha1sum of /dev/md/vol0 has changed
+ ERROR: /dev/md/vol0 has unexpected state on /dev/loop10
+ ERROR: unexpected number of online disks on /dev/loop10
+ ERROR: /dev/md/vol0 has unexpected state on /dev/loop8
+ ERROR: unexpected number of online disks on /dev/loop8
+ ERROR: sha1sum of /dev/md/vol0 has changed
diff --git a/tests/14imsm-r1_2d-grow-r1_3d.broken b/tests/14imsm-r1_2d-grow-r1_3d.broken
new file mode 100644
index 00000000..4ef1d406
--- /dev/null
+++ b/tests/14imsm-r1_2d-grow-r1_3d.broken
@@ -0,0 +1,5 @@
+always fails
+
+Fails with error:
+
+ mdadm/tests/func.sh: line 325: dvsize/chunk: division by 0 (error token is "chunk")
diff --git a/tests/14imsm-r1_2d-takeover-r0_2d.broken b/tests/14imsm-r1_2d-takeover-r0_2d.broken
new file mode 100644
index 00000000..89cd4e57
--- /dev/null
+++ b/tests/14imsm-r1_2d-takeover-r0_2d.broken
@@ -0,0 +1,6 @@
+always fails
+
+Fails with error:
+
+ tests/func.sh: line 325: dvsize/chunk: division by 0 (error token
+ is "chunk")
diff --git a/tests/18imsm-r10_4d-takeover-r0_2d.broken b/tests/18imsm-r10_4d-takeover-r0_2d.broken
new file mode 100644
index 00000000..a27399f5
--- /dev/null
+++ b/tests/18imsm-r10_4d-takeover-r0_2d.broken
@@ -0,0 +1,5 @@
+fails rarely
+
+Fails about 1 run in 100 with message:
+
+ ERROR: size is wrong for /dev/md/vol0: 2 * 5120 (chunk=128) = 20480, not 0
diff --git a/tests/18imsm-r1_2d-takeover-r0_1d.broken b/tests/18imsm-r1_2d-takeover-r0_1d.broken
new file mode 100644
index 00000000..aa1982e6
--- /dev/null
+++ b/tests/18imsm-r1_2d-takeover-r0_1d.broken
@@ -0,0 +1,6 @@
+always fails
+
+Fails with error:
+
+ tests/func.sh: line 325: dvsize/chunk: division by 0 (error token
+ is "chunk")
diff --git a/tests/19raid6auto-repair.broken b/tests/19raid6auto-repair.broken
new file mode 100644
index 00000000..e91a1425
--- /dev/null
+++ b/tests/19raid6auto-repair.broken
@@ -0,0 +1,5 @@
+always fails
+
+Fails with:
+
+ "should detect errors"
diff --git a/tests/19raid6repair.broken b/tests/19raid6repair.broken
new file mode 100644
index 00000000..e91a1425
--- /dev/null
+++ b/tests/19raid6repair.broken
@@ -0,0 +1,5 @@
+always fails
+
+Fails with:
+
+ "should detect errors"
--
2.38.1

View File

@ -0,0 +1,316 @@
From 239b3cc0b5da87e966746533b1873c439db54b16 Mon Sep 17 00:00:00 2001
From: Mateusz Grzonka <mateusz.grzonka@intel.com>
Date: Fri, 12 Aug 2022 16:36:02 +0200
Subject: [PATCH 45/83] mdadm: Replace obsolete usleep with nanosleep
According to POSIX.1-2001, usleep is considered obsolete.
Replace it with a wrapper that uses nanosleep, as recommended in man.
Add handy macros for conversions between msec, usec and nsec.
Signed-off-by: Mateusz Grzonka <mateusz.grzonka@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Assemble.c | 2 +-
Grow.c | 4 ++--
Manage.c | 10 +++++-----
managemon.c | 8 ++++----
mdadm.h | 4 ++++
mdmon.c | 4 ++--
super-intel.c | 6 +++---
util.c | 42 +++++++++++++++++++++++++++++++++---------
8 files changed, 54 insertions(+), 26 deletions(-)
diff --git a/Assemble.c b/Assemble.c
index 6df6bfbc..be2160b4 100644
--- a/Assemble.c
+++ b/Assemble.c
@@ -1947,7 +1947,7 @@ out:
break;
close(mdfd);
}
- usleep(usecs);
+ sleep_for(0, USEC_TO_NSEC(usecs), true);
usecs <<= 1;
}
}
diff --git a/Grow.c b/Grow.c
index 97f22c75..5780635a 100644
--- a/Grow.c
+++ b/Grow.c
@@ -954,7 +954,7 @@ int start_reshape(struct mdinfo *sra, int already_running,
err = sysfs_set_str(sra, NULL, "sync_action",
"reshape");
if (err)
- sleep(1);
+ sleep_for(1, 0, true);
} while (err && errno == EBUSY && cnt-- > 0);
}
return err;
@@ -5058,7 +5058,7 @@ int Grow_continue_command(char *devname, int fd,
}
st->ss->getinfo_super(st, content, NULL);
if (!content->reshape_active)
- sleep(3);
+ sleep_for(3, 0, true);
else
break;
} while (cnt-- > 0);
diff --git a/Manage.c b/Manage.c
index e5e6abe4..a142f8bd 100644
--- a/Manage.c
+++ b/Manage.c
@@ -244,7 +244,7 @@ int Manage_stop(char *devname, int fd, int verbose, int will_retry)
"array_state",
"inactive")) < 0 &&
errno == EBUSY) {
- usleep(200000);
+ sleep_for(0, MSEC_TO_NSEC(200), true);
count--;
}
if (err) {
@@ -328,7 +328,7 @@ int Manage_stop(char *devname, int fd, int verbose, int will_retry)
sysfs_get_ll(mdi, NULL, "sync_max", &old_sync_max) == 0) {
/* must be in the critical section - wait a bit */
delay -= 1;
- usleep(100000);
+ sleep_for(0, MSEC_TO_NSEC(100), true);
}
if (sysfs_set_str(mdi, NULL, "sync_action", "frozen") != 0)
@@ -405,7 +405,7 @@ int Manage_stop(char *devname, int fd, int verbose, int will_retry)
* quite started yet. Wait a bit and
* check 'sync_action' to see.
*/
- usleep(10000);
+ sleep_for(0, MSEC_TO_NSEC(10), true);
sysfs_get_str(mdi, NULL, "sync_action", buf, sizeof(buf));
if (strncmp(buf, "reshape", 7) != 0)
break;
@@ -447,7 +447,7 @@ done:
count = 25; err = 0;
while (count && fd >= 0 &&
(err = ioctl(fd, STOP_ARRAY, NULL)) < 0 && errno == EBUSY) {
- usleep(200000);
+ sleep_for(0, MSEC_TO_NSEC(200), true);
count --;
}
if (fd >= 0 && err) {
@@ -1105,7 +1105,7 @@ int Manage_remove(struct supertype *tst, int fd, struct mddev_dev *dv,
ret = sysfs_unique_holder(devnm, rdev);
if (ret < 2)
break;
- usleep(100 * 1000); /* 100ms */
+ sleep_for(0, MSEC_TO_NSEC(100), true);
} while (--count > 0);
if (ret == 0) {
diff --git a/managemon.c b/managemon.c
index 0e9bdf00..a7bfa8f6 100644
--- a/managemon.c
+++ b/managemon.c
@@ -207,7 +207,7 @@ static void replace_array(struct supertype *container,
remove_old();
while (pending_discard) {
while (discard_this == NULL)
- sleep(1);
+ sleep_for(1, 0, true);
remove_old();
}
pending_discard = old;
@@ -568,7 +568,7 @@ static void manage_member(struct mdstat_ent *mdstat,
updates = NULL;
while (update_queue_pending || update_queue) {
check_update_queue(container);
- usleep(15*1000);
+ sleep_for(0, MSEC_TO_NSEC(15), true);
}
replace_array(container, a, newa);
if (sysfs_set_str(&a->info, NULL,
@@ -822,7 +822,7 @@ static void handle_message(struct supertype *container, struct metadata_update *
if (msg->len <= 0)
while (update_queue_pending || update_queue) {
check_update_queue(container);
- usleep(15*1000);
+ sleep_for(0, MSEC_TO_NSEC(15), true);
}
if (msg->len == 0) { /* ping_monitor */
@@ -836,7 +836,7 @@ static void handle_message(struct supertype *container, struct metadata_update *
wakeup_monitor();
while (monitor_loop_cnt - cnt < 0)
- usleep(10 * 1000);
+ sleep_for(0, MSEC_TO_NSEC(10), true);
} else if (msg->len == -1) { /* ping_manager */
struct mdstat_ent *mdstat = mdstat_read(1, 0);
diff --git a/mdadm.h b/mdadm.h
index 163f4a49..add9c0b6 100644
--- a/mdadm.h
+++ b/mdadm.h
@@ -1720,6 +1720,10 @@ extern int cluster_get_dlmlock(void);
extern int cluster_release_dlmlock(void);
extern void set_dlm_hooks(void);
+#define MSEC_TO_NSEC(msec) ((msec) * 1000000)
+#define USEC_TO_NSEC(usec) ((usec) * 1000)
+extern void sleep_for(unsigned int sec, long nsec, bool wake_after_interrupt);
+
#define _ROUND_UP(val, base) (((val) + (base) - 1) & ~(base - 1))
#define ROUND_UP(val, base) _ROUND_UP(val, (typeof(val))(base))
#define ROUND_UP_PTR(ptr, base) ((typeof(ptr)) \
diff --git a/mdmon.c b/mdmon.c
index c057da63..e9d035eb 100644
--- a/mdmon.c
+++ b/mdmon.c
@@ -99,7 +99,7 @@ static int clone_monitor(struct supertype *container)
if (rc)
return rc;
while (mon_tid == -1)
- usleep(10);
+ sleep_for(0, USEC_TO_NSEC(10), true);
pthread_attr_destroy(&attr);
mgr_tid = syscall(SYS_gettid);
@@ -209,7 +209,7 @@ static void try_kill_monitor(pid_t pid, char *devname, int sock)
rv = kill(pid, SIGUSR1);
if (rv < 0)
break;
- usleep(200000);
+ sleep_for(0, MSEC_TO_NSEC(200), true);
}
}
diff --git a/super-intel.c b/super-intel.c
index 4ddfcf94..4d82af3d 100644
--- a/super-intel.c
+++ b/super-intel.c
@@ -5275,7 +5275,7 @@ static int get_super_block(struct intel_super **super_list, char *devnm, char *d
/* retry the load if we might have raced against mdmon */
if (err == 3 && devnm && mdmon_running(devnm))
for (retry = 0; retry < 3; retry++) {
- usleep(3000);
+ sleep_for(0, MSEC_TO_NSEC(3), true);
err = load_and_parse_mpb(dfd, s, NULL, keep_fd);
if (err != 3)
break;
@@ -5377,7 +5377,7 @@ static int load_super_imsm(struct supertype *st, int fd, char *devname)
if (mdstat && mdmon_running(mdstat->devnm) && getpid() != mdmon_pid(mdstat->devnm)) {
for (retry = 0; retry < 3; retry++) {
- usleep(3000);
+ sleep_for(0, MSEC_TO_NSEC(3), true);
rv = load_and_parse_mpb(fd, super, devname, 0);
if (rv != 3)
break;
@@ -12084,7 +12084,7 @@ int wait_for_reshape_imsm(struct mdinfo *sra, int ndata)
close(fd);
return 1;
}
- usleep(30000);
+ sleep_for(0, MSEC_TO_NSEC(30), true);
} else
break;
} while (retry--);
diff --git a/util.c b/util.c
index 38f0420e..ca48d976 100644
--- a/util.c
+++ b/util.c
@@ -166,7 +166,7 @@ retry:
pr_err("error %d when get PW mode on lock %s\n", errno, str);
/* let's try several times if EAGAIN happened */
if (dlm_lock_res->lksb.sb_status == EAGAIN && retry_count < 10) {
- sleep(10);
+ sleep_for(10, 0, true);
retry_count++;
goto retry;
}
@@ -1085,7 +1085,7 @@ int open_dev_excl(char *devnm)
int i;
int flags = O_RDWR;
dev_t devid = devnm2devid(devnm);
- long delay = 1000;
+ unsigned int delay = 1; // miliseconds
sprintf(buf, "%d:%d", major(devid), minor(devid));
for (i = 0; i < 25; i++) {
@@ -1098,8 +1098,8 @@ int open_dev_excl(char *devnm)
}
if (errno != EBUSY)
return fd;
- usleep(delay);
- if (delay < 200000)
+ sleep_for(0, MSEC_TO_NSEC(delay), true);
+ if (delay < 200)
delay *= 2;
}
return -1;
@@ -1123,7 +1123,7 @@ void wait_for(char *dev, int fd)
{
int i;
struct stat stb_want;
- long delay = 1000;
+ unsigned int delay = 1; // miliseconds
if (fstat(fd, &stb_want) != 0 ||
(stb_want.st_mode & S_IFMT) != S_IFBLK)
@@ -1135,8 +1135,8 @@ void wait_for(char *dev, int fd)
(stb.st_mode & S_IFMT) == S_IFBLK &&
(stb.st_rdev == stb_want.st_rdev))
return;
- usleep(delay);
- if (delay < 200000)
+ sleep_for(0, MSEC_TO_NSEC(delay), true);
+ if (delay < 200)
delay *= 2;
}
if (i == 25)
@@ -1821,7 +1821,7 @@ int hot_remove_disk(int mdfd, unsigned long dev, int force)
while ((ret = ioctl(mdfd, HOT_REMOVE_DISK, dev)) == -1 &&
errno == EBUSY &&
cnt-- > 0)
- usleep(10000);
+ sleep_for(0, MSEC_TO_NSEC(10), true);
return ret;
}
@@ -1834,7 +1834,7 @@ int sys_hot_remove_disk(int statefd, int force)
while ((ret = write(statefd, "remove", 6)) == -1 &&
errno == EBUSY &&
cnt-- > 0)
- usleep(10000);
+ sleep_for(0, MSEC_TO_NSEC(10), true);
return ret == 6 ? 0 : -1;
}
@@ -2375,3 +2375,27 @@ out:
close(fd_zero);
return ret;
}
+
+/**
+ * sleep_for() - Sleeps for specified time.
+ * @sec: Seconds to sleep for.
+ * @nsec: Nanoseconds to sleep for, has to be less than one second.
+ * @wake_after_interrupt: If set, wake up if interrupted.
+ *
+ * Function immediately returns if error different than EINTR occurs.
+ */
+void sleep_for(unsigned int sec, long nsec, bool wake_after_interrupt)
+{
+ struct timespec delay = {.tv_sec = sec, .tv_nsec = nsec};
+
+ assert(nsec < MSEC_TO_NSEC(1000));
+
+ do {
+ errno = 0;
+ nanosleep(&delay, &delay);
+ if (errno != 0 && errno != EINTR) {
+ pr_err("Error sleeping for %us %ldns: %s\n", sec, nsec, strerror(errno));
+ return;
+ }
+ } while (!wake_after_interrupt && errno == EINTR);
+}
--
2.38.1

View File

@ -0,0 +1,36 @@
From 39b381252c32275079344d30de18b76fda4bba26 Mon Sep 17 00:00:00 2001
From: Logan Gunthorpe <logang@deltatee.com>
Date: Wed, 27 Jul 2022 15:52:45 -0600
Subject: [PATCH 46/83] tests/00readonly: Run udevadm settle before setting ro
In some recent kernel versions, 00readonly fails with:
mdadm: failed to set readonly for /dev/md0: Device or resource busy
ERROR: array is not read-only!
This was traced down to a race condition with udev holding a reference
to the block device at the same time as trying to set it read only.
To fix this, call udevadm settle before setting the array read only.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
tests/00readonly | 1 +
1 file changed, 1 insertion(+)
diff --git a/tests/00readonly b/tests/00readonly
index 39202487..afe243b3 100644
--- a/tests/00readonly
+++ b/tests/00readonly
@@ -12,6 +12,7 @@ do
$dev1 $dev2 $dev3 $dev4 --assume-clean
check nosync
check $level
+ udevadm settle
mdadm -ro $md0
check readonly
state=$(cat /sys/block/md0/md/array_state)
--
2.38.1

View File

@ -0,0 +1,119 @@
From b7671c82010ffc04dfaecff2dd19ef8b2283e2b6 Mon Sep 17 00:00:00 2001
From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Date: Tue, 19 Jul 2022 14:48:21 +0200
Subject: [PATCH 47/83] tests: add test for names
Current behavior is not documented and tested. This test is a base for
future improvements. It is enough to test it only with native metadata,
because it is generic code. Generated properties are passed to metadata
handler.
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
tests/00createnames | 93 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 93 insertions(+)
create mode 100644 tests/00createnames
diff --git a/tests/00createnames b/tests/00createnames
new file mode 100644
index 00000000..64b81b92
--- /dev/null
+++ b/tests/00createnames
@@ -0,0 +1,93 @@
+set -x -e
+
+# Test how <devname> and --name= are handled for create mode.
+# We need to check three properties, generated from those parameters:
+# - devnode name
+# - link in /dev/md/ (MD_DEVNAME property from --detail --export)
+# - name in metadata (MD_NAME property from --examine --export)
+
+function _verify() {
+ local DEVNODE_NAME="$1"
+ local WANTED_LINK="$2"
+ local WANTED_NAME="$3"
+
+ local RES="$(mdadm -D --export $DEVNODE_NAME | grep MD_DEVNAME)"
+ if [[ "$?" != "0" ]]; then
+ echo "Cannot get details for $DEVNODE_NAME - unexpected devnode."
+ exit 1
+ fi
+
+ if [[ "$WANTED_LINK" != "empty" ]]; then
+ local EXPECTED="MD_DEVNAME=$WANTED_LINK"
+ if [[ "$RES" != "$EXPECTED" ]]; then
+ echo "$RES doesn't match $EXPECTED."
+ exit 1
+ fi
+ fi
+
+
+ local RES="$(mdadm -E --export $dev0 | grep MD_NAME)"
+ if [[ "$?" != "0" ]]; then
+ echo "Cannot get metadata from $dev0."
+ exit 1
+ fi
+
+ local EXPECTED="MD_NAME=$(hostname):$WANTED_NAME"
+ if [[ "$RES" != "$EXPECTED" ]]; then
+ echo "$RES doesn't match $EXPECTED."
+ exit 1
+ fi
+}
+
+function _create() {
+ local DEVNAME=$1
+ local NAME=$2
+
+ if [[ -z "$NAME" ]]; then
+ mdadm -CR "$DEVNAME" -l0 -n 1 $dev0 --force
+ else
+ mdadm -CR "$DEVNAME" --name="$NAME" -l0 -n 1 $dev0 --force
+ fi
+
+ if [[ "$?" != "0" ]]; then
+ echo "Cannot create device."
+ exit 1
+ fi
+}
+
+# The most trivial case.
+_create "/dev/md/name"
+_verify "/dev/md127" "name" "name"
+mdadm -S "/dev/md127"
+
+_create "name"
+_verify "/dev/md127" "name" "name"
+mdadm -S "/dev/md127"
+
+# Use 'mdX' as name.
+_create "/dev/md/md0"
+_verify "/dev/md127" "md0" "md0"
+mdadm -S "/dev/md127"
+
+_create "md0"
+_verify "/dev/md127" "md0" "md0"
+mdadm -S "/dev/md127"
+
+# <devnode> is used to create MD_DEVNAME but, name is used to create MD_NAME.
+_create "/dev/md/devnode" "name"
+_verify "/dev/md127" "devnode" "name"
+mdadm -S "/dev/md127"
+
+_create "devnode" "name"
+_verify "/dev/md127" "devnode" "name"
+mdadm -S "/dev/md127"
+
+# Devnode points to /dev/ directory. MD_DEVNAME doesn't exist.
+_create "/dev/md0"
+_verify "/dev/md0" "empty" "0"
+mdadm -S "/dev/md0"
+
+# Devnode points to /dev/ directory and name is set.
+_create "/dev/md0" "name"
+_verify "/dev/md0" "empty" "name"
+mdadm -S "/dev/md0"
--
2.38.1

View File

@ -0,0 +1,176 @@
From e4a030a0d3a953b8e74c118200e58dc83c2fc608 Mon Sep 17 00:00:00 2001
From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Date: Tue, 19 Jul 2022 14:48:22 +0200
Subject: [PATCH 48/83] mdadm: remove symlink option
The option is not used. Remove it from code.
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
ReadMe.c | 1 -
config.c | 7 +------
mdadm.8.in | 9 ---------
mdadm.c | 20 --------------------
mdadm.conf.5.in | 15 ---------------
mdadm.h | 2 --
6 files changed, 1 insertion(+), 53 deletions(-)
diff --git a/ReadMe.c b/ReadMe.c
index 7518a32a..7f94847e 100644
--- a/ReadMe.c
+++ b/ReadMe.c
@@ -147,7 +147,6 @@ struct option long_options[] = {
{"nofailfast",0, 0, NoFailFast},
{"re-add", 0, 0, ReAdd},
{"homehost", 1, 0, HomeHost},
- {"symlinks", 1, 0, Symlinks},
{"data-offset",1, 0, DataOffset},
{"nodes",1, 0, Nodes}, /* also for --assemble */
{"home-cluster",1, 0, ClusterName},
diff --git a/config.c b/config.c
index 9c725457..dc1620c1 100644
--- a/config.c
+++ b/config.c
@@ -194,7 +194,6 @@ struct mddev_dev *load_containers(void)
struct createinfo createinfo = {
.autof = 2, /* by default, create devices with standard names */
- .symlinks = 1,
.names = 0, /* By default, stick with numbered md devices. */
.bblist = 1, /* Use a bad block list by default */
#ifdef DEBIAN
@@ -310,11 +309,7 @@ static void createline(char *line)
if (!createinfo.supertype)
pr_err("metadata format %s unknown, ignoring\n",
w+9);
- } else if (strncasecmp(w, "symlinks=yes", 12) == 0)
- createinfo.symlinks = 1;
- else if (strncasecmp(w, "symlinks=no", 11) == 0)
- createinfo.symlinks = 0;
- else if (strncasecmp(w, "names=yes", 12) == 0)
+ } else if (strncasecmp(w, "names=yes", 12) == 0)
createinfo.names = 1;
else if (strncasecmp(w, "names=no", 11) == 0)
createinfo.names = 0;
diff --git a/mdadm.8.in b/mdadm.8.in
index 0be02e4a..f2736226 100644
--- a/mdadm.8.in
+++ b/mdadm.8.in
@@ -1048,11 +1048,6 @@ simultaneously. If not specified, this defaults to 4.
Specify journal device for the RAID-4/5/6 array. The journal device
should be a SSD with reasonable lifetime.
-.TP
-.BR \-\-symlinks
-Auto creation of symlinks in /dev to /dev/md, option --symlinks must
-be 'no' or 'yes' and work with --create and --build.
-
.TP
.BR \-k ", " \-\-consistency\-policy=
Specify how the array maintains consistency in case of unexpected shutdown.
@@ -1405,10 +1400,6 @@ Reshape can be continued later using the
.B \-\-continue
option for the grow command.
-.TP
-.BR \-\-symlinks
-See this option under Create and Build options.
-
.SH For Manage mode:
.TP
diff --git a/mdadm.c b/mdadm.c
index 56722ed9..180f7a9c 100644
--- a/mdadm.c
+++ b/mdadm.c
@@ -59,7 +59,6 @@ int main(int argc, char *argv[])
struct mddev_dev *dv;
mdu_array_info_t array;
int devs_found = 0;
- char *symlinks = NULL;
int grow_continue = 0;
/* autof indicates whether and how to create device node.
* bottom 3 bits are style. Rest (when shifted) are number of parts
@@ -663,13 +662,6 @@ int main(int argc, char *argv[])
case O(ASSEMBLE,Auto): /* auto-creation of device node */
c.autof = parse_auto(optarg, "--auto flag", 0);
continue;
-
- case O(CREATE,Symlinks):
- case O(BUILD,Symlinks):
- case O(ASSEMBLE,Symlinks): /* auto creation of symlinks in /dev to /dev/md */
- symlinks = optarg;
- continue;
-
case O(BUILD,'f'): /* force honouring '-n 1' */
case O(BUILD,Force): /* force honouring '-n 1' */
case O(GROW,'f'): /* ditto */
@@ -1325,18 +1317,6 @@ int main(int argc, char *argv[])
exit(2);
}
- if (symlinks) {
- struct createinfo *ci = conf_get_create_info();
-
- if (strcasecmp(symlinks, "yes") == 0)
- ci->symlinks = 1;
- else if (strcasecmp(symlinks, "no") == 0)
- ci->symlinks = 0;
- else {
- pr_err("option --symlinks must be 'no' or 'yes'\n");
- exit(2);
- }
- }
/* Ok, got the option parsing out of the way
* hopefully it's mostly right but there might be some stuff
* missing
diff --git a/mdadm.conf.5.in b/mdadm.conf.5.in
index cd4e6a9d..bc2295c2 100644
--- a/mdadm.conf.5.in
+++ b/mdadm.conf.5.in
@@ -338,21 +338,6 @@ missing device entries should be created.
The name of the metadata format to use if none is explicitly given.
This can be useful to impose a system-wide default of version-1 superblocks.
-.TP
-.B symlinks=no
-Normally when creating devices in
-.B /dev/md/
-.I mdadm
-will create a matching symlink from
-.B /dev/
-with a name starting
-.B md
-or
-.BR md_ .
-Give
-.B symlinks=no
-to suppress this symlink creation.
-
.TP
.B names=yes
Since Linux 2.6.29 it has been possible to create
diff --git a/mdadm.h b/mdadm.h
index add9c0b6..93e72786 100644
--- a/mdadm.h
+++ b/mdadm.h
@@ -394,7 +394,6 @@ struct createinfo {
int gid;
int autof;
int mode;
- int symlinks;
int names;
int bblist;
struct supertype *supertype;
@@ -442,7 +441,6 @@ enum special_options {
BackupFile,
HomeHost,
AutoHomeHost,
- Symlinks,
AutoDetect,
Waitclean,
DetailPlatform,
--
2.38.1

View File

@ -0,0 +1,232 @@
From ae5dfc56b7a96805d5a0b50eaf93b9fec8604298 Mon Sep 17 00:00:00 2001
From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Date: Tue, 19 Jul 2022 14:48:23 +0200
Subject: [PATCH 49/83] mdadm: move data_offset to struct shape
Data offset is a shape property so move it there to remove additional
parameter from some functions.
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Create.c | 16 ++++++++--------
Grow.c | 7 +++----
mdadm.c | 20 +++++++++-----------
mdadm.h | 5 ++---
4 files changed, 22 insertions(+), 26 deletions(-)
diff --git a/Create.c b/Create.c
index c84c1ac8..e06ec2ae 100644
--- a/Create.c
+++ b/Create.c
@@ -95,7 +95,7 @@ int Create(struct supertype *st, char *mddev,
char *name, int *uuid,
int subdevs, struct mddev_dev *devlist,
struct shape *s,
- struct context *c, unsigned long long data_offset)
+ struct context *c)
{
/*
* Create a new raid array.
@@ -288,7 +288,7 @@ int Create(struct supertype *st, char *mddev,
newsize = s->size * 2;
if (st && ! st->ss->validate_geometry(st, s->level, s->layout, s->raiddisks,
&s->chunk, s->size*2,
- data_offset, NULL,
+ s->data_offset, NULL,
&newsize, s->consistency_policy,
c->verbose >= 0))
return 1;
@@ -323,10 +323,10 @@ int Create(struct supertype *st, char *mddev,
info.array.working_disks = 0;
dnum = 0;
for (dv = devlist; dv; dv = dv->next)
- if (data_offset == VARIABLE_OFFSET)
+ if (s->data_offset == VARIABLE_OFFSET)
dv->data_offset = INVALID_SECTORS;
else
- dv->data_offset = data_offset;
+ dv->data_offset = s->data_offset;
for (dv=devlist; dv && !have_container; dv=dv->next, dnum++) {
char *dname = dv->devname;
@@ -342,7 +342,7 @@ int Create(struct supertype *st, char *mddev,
missing_disks ++;
continue;
}
- if (data_offset == VARIABLE_OFFSET) {
+ if (s->data_offset == VARIABLE_OFFSET) {
doff = strchr(dname, ':');
if (doff) {
*doff++ = 0;
@@ -350,7 +350,7 @@ int Create(struct supertype *st, char *mddev,
} else
dv->data_offset = INVALID_SECTORS;
} else
- dv->data_offset = data_offset;
+ dv->data_offset = s->data_offset;
dfd = open(dname, O_RDONLY);
if (dfd < 0) {
@@ -535,7 +535,7 @@ int Create(struct supertype *st, char *mddev,
if (!st->ss->validate_geometry(st, s->level, s->layout,
s->raiddisks,
&s->chunk, minsize*2,
- data_offset,
+ s->data_offset,
NULL, NULL,
s->consistency_policy, 0)) {
pr_err("devices too large for RAID level %d\n", s->level);
@@ -754,7 +754,7 @@ int Create(struct supertype *st, char *mddev,
}
}
if (!st->ss->init_super(st, &info.array, s, name, c->homehost, uuid,
- data_offset))
+ s->data_offset))
goto abort_locked;
total_slots = info.array.nr_disks;
diff --git a/Grow.c b/Grow.c
index 5780635a..868bdc3a 100644
--- a/Grow.c
+++ b/Grow.c
@@ -1775,7 +1775,6 @@ static int reshape_container(char *container, char *devname,
int Grow_reshape(char *devname, int fd,
struct mddev_dev *devlist,
- unsigned long long data_offset,
struct context *c, struct shape *s)
{
/* Make some changes in the shape of an array.
@@ -1821,7 +1820,7 @@ int Grow_reshape(char *devname, int fd,
return 1;
}
- if (data_offset != INVALID_SECTORS && array.level != 10 &&
+ if (s->data_offset != INVALID_SECTORS && array.level != 10 &&
(array.level < 4 || array.level > 6)) {
pr_err("--grow --data-offset not yet supported\n");
return 1;
@@ -2179,7 +2178,7 @@ size_change_error:
if ((s->level == UnSet || s->level == array.level) &&
(s->layout_str == NULL) &&
(s->chunk == 0 || s->chunk == array.chunk_size) &&
- data_offset == INVALID_SECTORS &&
+ s->data_offset == INVALID_SECTORS &&
(s->raiddisks == 0 || s->raiddisks == array.raid_disks)) {
/* Nothing more to do */
if (!changed && c->verbose >= 0)
@@ -2379,7 +2378,7 @@ size_change_error:
}
sync_metadata(st);
rv = reshape_array(container, fd, devname, st, &info, c->force,
- devlist, data_offset, c->backup_file,
+ devlist, s->data_offset, c->backup_file,
c->verbose, 0, 0, 0);
frozen = 0;
}
diff --git a/mdadm.c b/mdadm.c
index 180f7a9c..845e4466 100644
--- a/mdadm.c
+++ b/mdadm.c
@@ -49,7 +49,6 @@ int main(int argc, char *argv[])
int i;
unsigned long long array_size = 0;
- unsigned long long data_offset = INVALID_SECTORS;
struct mddev_ident ident;
char *configfile = NULL;
int devmode = 0;
@@ -79,6 +78,7 @@ int main(int argc, char *argv[])
.layout = UnSet,
.bitmap_chunk = UnSet,
.consistency_policy = CONSISTENCY_POLICY_UNKNOWN,
+ .data_offset = INVALID_SECTORS,
};
char sys_hostname[256];
@@ -479,15 +479,15 @@ int main(int argc, char *argv[])
case O(CREATE,DataOffset):
case O(GROW,DataOffset):
- if (data_offset != INVALID_SECTORS) {
+ if (s.data_offset != INVALID_SECTORS) {
pr_err("data-offset may only be specified one. Second value is %s.\n", optarg);
exit(2);
}
if (mode == CREATE && strcmp(optarg, "variable") == 0)
- data_offset = VARIABLE_OFFSET;
+ s.data_offset = VARIABLE_OFFSET;
else
- data_offset = parse_size(optarg);
- if (data_offset == INVALID_SECTORS) {
+ s.data_offset = parse_size(optarg);
+ if (s.data_offset == INVALID_SECTORS) {
pr_err("invalid data-offset: %s\n",
optarg);
exit(2);
@@ -1416,7 +1416,7 @@ int main(int argc, char *argv[])
exit(1);
}
- if (c.backup_file && data_offset != INVALID_SECTORS) {
+ if (c.backup_file && s.data_offset != INVALID_SECTORS) {
pr_err("--backup-file and --data-offset are incompatible\n");
exit(2);
}
@@ -1587,8 +1587,7 @@ int main(int argc, char *argv[])
rv = Create(ss, devlist->devname,
ident.name, ident.uuid_set ? ident.uuid : NULL,
- devs_found-1, devlist->next,
- &s, &c, data_offset);
+ devs_found - 1, devlist->next, &s, &c);
break;
case MISC:
if (devmode == 'E') {
@@ -1706,10 +1705,9 @@ int main(int argc, char *argv[])
c.verbose);
else if (s.size > 0 || s.raiddisks || s.layout_str ||
s.chunk != 0 || s.level != UnSet ||
- data_offset != INVALID_SECTORS) {
+ s.data_offset != INVALID_SECTORS) {
rv = Grow_reshape(devlist->devname, mdfd,
- devlist->next,
- data_offset, &c, &s);
+ devlist->next, &c, &s);
} else if (s.consistency_policy != CONSISTENCY_POLICY_UNKNOWN) {
rv = Grow_consistency_policy(devlist->devname, mdfd, &c, &s);
} else if (array_size == 0)
diff --git a/mdadm.h b/mdadm.h
index 93e72786..adb7cdaa 100644
--- a/mdadm.h
+++ b/mdadm.h
@@ -595,6 +595,7 @@ struct shape {
int assume_clean;
int write_behind;
unsigned long long size;
+ unsigned long long data_offset;
int consistency_policy;
};
@@ -1431,7 +1432,6 @@ extern int Grow_addbitmap(char *devname, int fd,
struct context *c, struct shape *s);
extern int Grow_reshape(char *devname, int fd,
struct mddev_dev *devlist,
- unsigned long long data_offset,
struct context *c, struct shape *s);
extern int Grow_restart(struct supertype *st, struct mdinfo *info,
int *fdlist, int cnt, char *backup_file, int verbose);
@@ -1462,8 +1462,7 @@ extern int Create(struct supertype *st, char *mddev,
char *name, int *uuid,
int subdevs, struct mddev_dev *devlist,
struct shape *s,
- struct context *c,
- unsigned long long data_offset);
+ struct context *c);
extern int Detail(char *dev, struct context *c);
extern int Detail_Platform(struct superswitch *ss, int scan, int verbose, int export, char *controller_path);
--
2.38.1

View File

@ -0,0 +1,162 @@
From 27ad4900501c615b7c6b266bf23948e5606dba53 Mon Sep 17 00:00:00 2001
From: Logan Gunthorpe <logang@deltatee.com>
Date: Wed, 27 Jul 2022 15:52:46 -0600
Subject: [PATCH 50/83] mdadm: Don't open md device for CREATE and ASSEMBLE
The mdadm command tries to open the md device for most modes, first
thing, no matter what. When running to create or assemble an array,
in most cases, the md device will not exist, the open call will fail
and everything will proceed correctly.
However, when running tests, a create or assembly command may be run
shortly after stopping an array and the old md device file may still
be around. Then, if create_on_open is set in the kernel, a new md
device will be created when mdadm does its initial open.
When mdadm gets around to creating the new device with the new_array
parameter it issues this error:
mdadm: Fail to create md0 when using
/sys/module/md_mod/parameters/new_array, fallback to creation via node
This is because an mddev was already created by the kernel with the
earlier open() call and thus the new one being created will fail with
EEXIST. The mdadm command will still successfully be created due to
falling back to the node creation method. However, the error message
itself will fail any test that's running it.
This issue is a race condition that is very rare, but a recent change
in the kernel caused this to happen more frequently: about 1 in 50
times.
To fix this, don't bother trying to open the md device for CREATE,
ASSEMBLE and BUILD commands, as the file descriptor will never be used
anyway even if it is successfully openned. The mdfd has not been used
for these commands since:
7f91af49ad09 ("Delay creation of array devices for assemble/build/create")
The checks that were done on the open device can be changed to being
done with stat.
Side note: it would be nice to disable create_on_open as well to help
solve this, but it seems the work for this was never finished. By default,
mdadm will create using the old node interface when a name is specified
unless the user specifically puts names=yes in a config file, which
doesn't seem to be common or desirable to require this..
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
lib.c | 12 ++++++++++++
mdadm.c | 40 ++++++++++++++++++++--------------------
mdadm.h | 1 +
3 files changed, 33 insertions(+), 20 deletions(-)
diff --git a/lib.c b/lib.c
index 7e3e3d47..e395b28d 100644
--- a/lib.c
+++ b/lib.c
@@ -164,6 +164,18 @@ char *stat2devnm(struct stat *st)
return devid2devnm(st->st_rdev);
}
+bool stat_is_md_dev(struct stat *st)
+{
+ if ((S_IFMT & st->st_mode) != S_IFBLK)
+ return false;
+ if (major(st->st_rdev) == MD_MAJOR)
+ return true;
+ if (major(st->st_rdev) == (unsigned)get_mdp_major())
+ return true;
+
+ return false;
+}
+
char *fd2devnm(int fd)
{
struct stat stb;
diff --git a/mdadm.c b/mdadm.c
index 845e4466..972adb52 100644
--- a/mdadm.c
+++ b/mdadm.c
@@ -1329,6 +1329,9 @@ int main(int argc, char *argv[])
if (mode == MANAGE || mode == BUILD || mode == CREATE ||
mode == GROW || (mode == ASSEMBLE && ! c.scan)) {
+ struct stat stb;
+ int ret;
+
if (devs_found < 1) {
pr_err("an md device must be given in this mode\n");
exit(2);
@@ -1341,6 +1344,12 @@ int main(int argc, char *argv[])
mdfd = open_mddev(devlist->devname, 1);
if (mdfd < 0)
exit(1);
+
+ ret = fstat(mdfd, &stb);
+ if (ret) {
+ pr_err("fstat failed on %s.\n", devlist->devname);
+ exit(1);
+ }
} else {
char *bname = basename(devlist->devname);
@@ -1348,30 +1357,21 @@ int main(int argc, char *argv[])
pr_err("Name %s is too long.\n", devlist->devname);
exit(1);
}
- /* non-existent device is OK */
- mdfd = open_mddev(devlist->devname, 0);
- }
- if (mdfd == -2) {
- pr_err("device %s exists but is not an md array.\n", devlist->devname);
- exit(1);
- }
- if ((int)ident.super_minor == -2) {
- struct stat stb;
- if (mdfd < 0) {
+
+ ret = stat(devlist->devname, &stb);
+ if (ident.super_minor == -2 && ret != 0) {
pr_err("--super-minor=dev given, and listed device %s doesn't exist.\n",
- devlist->devname);
+ devlist->devname);
+ exit(1);
+ }
+
+ if (!ret && !stat_is_md_dev(&stb)) {
+ pr_err("device %s exists but is not an md array.\n", devlist->devname);
exit(1);
}
- fstat(mdfd, &stb);
- ident.super_minor = minor(stb.st_rdev);
- }
- if (mdfd >= 0 && mode != MANAGE && mode != GROW) {
- /* We don't really want this open yet, we just might
- * have wanted to check some things
- */
- close(mdfd);
- mdfd = -1;
}
+ if (ident.super_minor == -2)
+ ident.super_minor = minor(stb.st_rdev);
}
if (s.raiddisks) {
diff --git a/mdadm.h b/mdadm.h
index adb7cdaa..8208b81e 100644
--- a/mdadm.h
+++ b/mdadm.h
@@ -1672,6 +1672,7 @@ void *super1_make_v0(struct supertype *st, struct mdinfo *info, mdp_super_t *sb0
extern char *stat2kname(struct stat *st);
extern char *fd2kname(int fd);
extern char *stat2devnm(struct stat *st);
+bool stat_is_md_dev(struct stat *st);
extern char *fd2devnm(int fd);
extern void udev_block(char *devnm);
extern void udev_unblock(void);
--
2.38.1

View File

@ -0,0 +1,231 @@
From 7211116c295ba1f9e1fcbdc2dd2d3762855062e1 Mon Sep 17 00:00:00 2001
From: Mateusz Kusiak <mateusz.kusiak@intel.com>
Date: Thu, 28 Jul 2022 20:20:53 +0800
Subject: [PATCH 51/83] Grow: Split Grow_reshape into helper function
Grow_reshape should be split into helper functions given its size.
- Add helper function for preparing reshape on external metadata.
- Close cfd file descriptor.
Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Grow.c | 125 ++++++++++++++++++++++++++++++--------------------------
mdadm.h | 1 +
util.c | 14 +++++++
3 files changed, 81 insertions(+), 59 deletions(-)
diff --git a/Grow.c b/Grow.c
index 868bdc3a..0f07a894 100644
--- a/Grow.c
+++ b/Grow.c
@@ -1773,6 +1773,65 @@ static int reshape_container(char *container, char *devname,
char *backup_file, int verbose,
int forked, int restart, int freeze_reshape);
+/**
+ * prepare_external_reshape() - prepares update on external metadata if supported.
+ * @devname: Device name.
+ * @subarray: Subarray.
+ * @st: Supertype.
+ * @container: Container.
+ * @cfd: Container file descriptor.
+ *
+ * Function checks that the requested reshape is supported on external metadata,
+ * and performs an initial check that the container holds the pre-requisite
+ * spare devices (mdmon owns final validation).
+ *
+ * Return: 0 on success, else 1
+ */
+static int prepare_external_reshape(char *devname, char *subarray,
+ struct supertype *st, char *container,
+ const int cfd)
+{
+ struct mdinfo *cc = NULL;
+ struct mdinfo *content = NULL;
+
+ if (st->ss->load_container(st, cfd, NULL)) {
+ pr_err("Cannot read superblock for %s\n", devname);
+ return 1;
+ }
+
+ if (!st->ss->container_content)
+ return 1;
+
+ cc = st->ss->container_content(st, subarray);
+ for (content = cc; content ; content = content->next) {
+ /*
+ * check if reshape is allowed based on metadata
+ * indications stored in content.array.status
+ */
+ if (is_bit_set(&content->array.state, MD_SB_BLOCK_VOLUME) ||
+ is_bit_set(&content->array.state, MD_SB_BLOCK_CONTAINER_RESHAPE)) {
+ pr_err("Cannot reshape arrays in container with unsupported metadata: %s(%s)\n",
+ devname, container);
+ goto error;
+ }
+ if (content->consistency_policy == CONSISTENCY_POLICY_PPL) {
+ pr_err("Operation not supported when ppl consistency policy is enabled\n");
+ goto error;
+ }
+ if (content->consistency_policy == CONSISTENCY_POLICY_BITMAP) {
+ pr_err("Operation not supported when write-intent bitmap consistency policy is enabled\n");
+ goto error;
+ }
+ }
+ sysfs_free(cc);
+ if (mdmon_running(container))
+ st->update_tail = &st->updates;
+ return 0;
+error:
+ sysfs_free(cc);
+ return 1;
+}
+
int Grow_reshape(char *devname, int fd,
struct mddev_dev *devlist,
struct context *c, struct shape *s)
@@ -1799,7 +1858,7 @@ int Grow_reshape(char *devname, int fd,
struct supertype *st;
char *subarray = NULL;
- int frozen;
+ int frozen = 0;
int changed = 0;
char *container = NULL;
int cfd = -1;
@@ -1808,7 +1867,7 @@ int Grow_reshape(char *devname, int fd,
int added_disks;
struct mdinfo info;
- struct mdinfo *sra;
+ struct mdinfo *sra = NULL;
if (md_get_array_info(fd, &array) < 0) {
pr_err("%s is not an active md array - aborting\n",
@@ -1865,13 +1924,7 @@ int Grow_reshape(char *devname, int fd,
}
}
- /* in the external case we need to check that the requested reshape is
- * supported, and perform an initial check that the container holds the
- * pre-requisite spare devices (mdmon owns final validation)
- */
if (st->ss->external) {
- int retval;
-
if (subarray) {
container = st->container_devnm;
cfd = open_dev_excl(st->container_devnm);
@@ -1887,13 +1940,12 @@ int Grow_reshape(char *devname, int fd,
return 1;
}
- retval = st->ss->load_container(st, cfd, NULL);
-
- if (retval) {
- pr_err("Cannot read superblock for %s\n", devname);
- close(cfd);
+ rv = prepare_external_reshape(devname, subarray, st,
+ container, cfd);
+ if (rv > 0) {
free(subarray);
- return 1;
+ close(cfd);
+ goto release;
}
if (s->raiddisks && subarray) {
@@ -1902,51 +1954,6 @@ int Grow_reshape(char *devname, int fd,
free(subarray);
return 1;
}
-
- /* check if operation is supported for metadata handler */
- if (st->ss->container_content) {
- struct mdinfo *cc = NULL;
- struct mdinfo *content = NULL;
-
- cc = st->ss->container_content(st, subarray);
- for (content = cc; content ; content = content->next) {
- int allow_reshape = 1;
-
- /* check if reshape is allowed based on metadata
- * indications stored in content.array.status
- */
- if (content->array.state &
- (1 << MD_SB_BLOCK_VOLUME))
- allow_reshape = 0;
- if (content->array.state &
- (1 << MD_SB_BLOCK_CONTAINER_RESHAPE))
- allow_reshape = 0;
- if (!allow_reshape) {
- pr_err("cannot reshape arrays in container with unsupported metadata: %s(%s)\n",
- devname, container);
- sysfs_free(cc);
- free(subarray);
- return 1;
- }
- if (content->consistency_policy ==
- CONSISTENCY_POLICY_PPL) {
- pr_err("Operation not supported when ppl consistency policy is enabled\n");
- sysfs_free(cc);
- free(subarray);
- return 1;
- }
- if (content->consistency_policy ==
- CONSISTENCY_POLICY_BITMAP) {
- pr_err("Operation not supported when write-intent bitmap is enabled\n");
- sysfs_free(cc);
- free(subarray);
- return 1;
- }
- }
- sysfs_free(cc);
- }
- if (mdmon_running(container))
- st->update_tail = &st->updates;
}
added_disks = 0;
diff --git a/mdadm.h b/mdadm.h
index 8208b81e..941a5f38 100644
--- a/mdadm.h
+++ b/mdadm.h
@@ -1539,6 +1539,7 @@ extern int stat_is_blkdev(char *devname, dev_t *rdev);
extern bool is_dev_alive(char *path);
extern int get_mdp_major(void);
extern int get_maj_min(char *dev, int *major, int *minor);
+extern bool is_bit_set(int *val, unsigned char index);
extern int dev_open(char *dev, int flags);
extern int open_dev(char *devnm);
extern void reopen_mddev(int mdfd);
diff --git a/util.c b/util.c
index ca48d976..26ffdcea 100644
--- a/util.c
+++ b/util.c
@@ -1027,6 +1027,20 @@ int get_maj_min(char *dev, int *major, int *minor)
*e == 0);
}
+/**
+ * is_bit_set() - get bit value by index.
+ * @val: value.
+ * @index: index of the bit (LSB numbering).
+ *
+ * Return: bit value.
+ */
+bool is_bit_set(int *val, unsigned char index)
+{
+ if ((*val) & (1 << index))
+ return true;
+ return false;
+}
+
int dev_open(char *dev, int flags)
{
/* like 'open', but if 'dev' matches %d:%d, create a temp
--
2.38.1

View File

@ -0,0 +1,36 @@
From 5c3c3df646dd3b7e8df81152f08e9ac4ddccc671 Mon Sep 17 00:00:00 2001
From: Kinga Tanska <kinga.tanska@intel.com>
Date: Fri, 19 Aug 2022 02:55:46 +0200
Subject: [PATCH 52/83] Assemble: check if device is container before
scheduling force-clean update
Up to now using assemble with force flag making each array as clean.
Force-clean should not be done for the container. This commit add
check if device is different than container before cleaning.
Signed-off-by: Kinga Tanska <kinga.tanska@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Assemble.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/Assemble.c b/Assemble.c
index be2160b4..1dd82a8c 100644
--- a/Assemble.c
+++ b/Assemble.c
@@ -1809,10 +1809,9 @@ try_again:
}
#endif
}
- if (c->force && !clean &&
+ if (c->force && !clean && content->array.level != LEVEL_CONTAINER &&
!enough(content->array.level, content->array.raid_disks,
- content->array.layout, clean,
- avail)) {
+ content->array.layout, clean, avail)) {
change += st->ss->update_super(st, content, "force-array",
devices[chosen_drive].devname, c->verbose,
0, NULL);
--
2.38.1

View File

@ -0,0 +1,112 @@
From 171e9743881edf2dfb163ddff483566fbf913ccd Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Fri, 26 Aug 2022 08:55:56 +1000
Subject: [PATCH 53/83] super1: report truncated device
When the metadata is at the start of the device, it is possible that it
describes a device large than the one it is actually stored on. When
this happens, report it loudly in --examine.
....
Unused Space : before=1968 sectors, after=-2047 sectors DEVICE TOO SMALL
State : clean TRUNCATED DEVICE
....
Also report in --assemble so that the failure which the kernel will
report will be explained.
mdadm: Device /dev/sdb is not large enough for data described in superblock
mdadm: no RAID superblock on /dev/sdb
mdadm: /dev/sdb has no superblock - assembly aborted
Scenario can be demonstrated as follows:
mdadm: Note: this array has metadata at the start and
may not be suitable as a boot device. If you plan to
store '/boot' on this device please ensure that
your boot-loader understands md/v1.x metadata, or use
--metadata=0.90
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md/test started.
mdadm: stopped /dev/md/test
Unused Space : before=1968 sectors, after=-2047 sectors DEVICE TOO SMALL
State : clean TRUNCATED DEVICE
Unused Space : before=1968 sectors, after=-2047 sectors DEVICE TOO SMALL
State : clean TRUNCATED DEVICE
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
super1.c | 35 ++++++++++++++++++++++++++++-------
1 file changed, 28 insertions(+), 7 deletions(-)
diff --git a/super1.c b/super1.c
index 71af860c..58345e68 100644
--- a/super1.c
+++ b/super1.c
@@ -406,12 +406,18 @@ static void examine_super1(struct supertype *st, char *homehost)
st->ss->getinfo_super(st, &info, NULL);
if (info.space_after != 1 &&
- !(__le32_to_cpu(sb->feature_map) & MD_FEATURE_NEW_OFFSET))
- printf(" Unused Space : before=%llu sectors, after=%llu sectors\n",
- info.space_before, info.space_after);
-
- printf(" State : %s\n",
- (__le64_to_cpu(sb->resync_offset)+1)? "active":"clean");
+ !(__le32_to_cpu(sb->feature_map) & MD_FEATURE_NEW_OFFSET)) {
+ printf(" Unused Space : before=%llu sectors, ",
+ info.space_before);
+ if (info.space_after < INT64_MAX)
+ printf("after=%llu sectors\n", info.space_after);
+ else
+ printf("after=-%llu sectors DEVICE TOO SMALL\n",
+ UINT64_MAX - info.space_after);
+ }
+ printf(" State : %s%s\n",
+ (__le64_to_cpu(sb->resync_offset)+1) ? "active":"clean",
+ (info.space_after > INT64_MAX) ? " TRUNCATED DEVICE" : "");
printf(" Device UUID : ");
for (i=0; i<16; i++) {
if ((i&3)==0 && i != 0)
@@ -2206,6 +2212,7 @@ static int load_super1(struct supertype *st, int fd, char *devname)
tst.ss = &super1;
for (tst.minor_version = 0; tst.minor_version <= 2;
tst.minor_version++) {
+ tst.ignore_hw_compat = st->ignore_hw_compat;
switch(load_super1(&tst, fd, devname)) {
case 0: super = tst.sb;
if (bestvers == -1 ||
@@ -2312,7 +2319,6 @@ static int load_super1(struct supertype *st, int fd, char *devname)
free(super);
return 2;
}
- st->sb = super;
bsb = (struct bitmap_super_s *)(((char*)super)+MAX_SB_SIZE);
@@ -2322,6 +2328,21 @@ static int load_super1(struct supertype *st, int fd, char *devname)
if (st->data_offset == INVALID_SECTORS)
st->data_offset = __le64_to_cpu(super->data_offset);
+ if (st->minor_version >= 1 &&
+ st->ignore_hw_compat == 0 &&
+ (dsize < (__le64_to_cpu(super->data_offset) +
+ __le64_to_cpu(super->size))
+ ||
+ dsize < (__le64_to_cpu(super->data_offset) +
+ __le64_to_cpu(super->data_size)))) {
+ if (devname)
+ pr_err("Device %s is not large enough for data described in superblock\n",
+ devname);
+ free(super);
+ return 2;
+ }
+ st->sb = super;
+
/* Now check on the bitmap superblock */
if ((__le32_to_cpu(super->feature_map)&MD_FEATURE_BITMAP_OFFSET) == 0)
return 0;
--
2.38.1

View File

@ -0,0 +1,616 @@
From 1a386f804d8392b849b3362da6b0157b0db83091 Mon Sep 17 00:00:00 2001
From: Mateusz Grzonka <mateusz.grzonka@intel.com>
Date: Fri, 12 Aug 2022 16:52:12 +0200
Subject: [PATCH 54/83] mdadm: Correct typos, punctuation and grammar in man
Signed-off-by: Mateusz Grzonka <mateusz.grzonka@intel.com>
Reviewed-by: Wol <anthony@youngman.org.uk>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
mdadm.8.in | 178 ++++++++++++++++++++++++++---------------------------
1 file changed, 88 insertions(+), 90 deletions(-)
diff --git a/mdadm.8.in b/mdadm.8.in
index f2736226..70c79d1e 100644
--- a/mdadm.8.in
+++ b/mdadm.8.in
@@ -158,7 +158,7 @@ adding new spares and removing faulty devices.
.B Misc
This is an 'everything else' mode that supports operations on active
arrays, operations on component devices such as erasing old superblocks, and
-information gathering operations.
+information-gathering operations.
.\"This mode allows operations on independent devices such as examine MD
.\"superblocks, erasing old superblocks and stopping active arrays.
@@ -231,12 +231,12 @@ mode to be assumed.
.TP
.BR \-h ", " \-\-help
-Display general help message or, after one of the above options, a
+Display a general help message or, after one of the above options, a
mode-specific help message.
.TP
.B \-\-help\-options
-Display more detailed help about command line parsing and some commonly
+Display more detailed help about command-line parsing and some commonly
used options.
.TP
@@ -266,7 +266,7 @@ the exact meaning of this option in different contexts.
.TP
.BR \-c ", " \-\-config=
-Specify the config file or directory. If not specified, default config file
+Specify the config file or directory. If not specified, the default config file
and default conf.d directory will be used. See
.BR mdadm.conf (5)
for more details.
@@ -379,7 +379,7 @@ When creating an array, the
.B homehost
will be recorded in the metadata. For version-1 superblocks, it will
be prefixed to the array name. For version-0.90 superblocks, part of
-the SHA1 hash of the hostname will be stored in the later half of the
+the SHA1 hash of the hostname will be stored in the latter half of the
UUID.
When reporting information about an array, any array which is tagged
@@ -388,7 +388,7 @@ for the given homehost will be reported as such.
When using Auto-Assemble, only arrays tagged for the given homehost
will be allowed to use 'local' names (i.e. not ending in '_' followed
by a digit string). See below under
-.BR "Auto Assembly" .
+.BR "Auto-Assembly" .
The special name "\fBany\fP" can be used as a wild card. If an array
is created with
@@ -403,7 +403,7 @@ When
.I mdadm
needs to print the name for a device it normally finds the name in
.B /dev
-which refers to the device and is shortest. When a path component is
+which refers to the device and is the shortest. When a path component is
given with
.B \-\-prefer
.I mdadm
@@ -478,9 +478,9 @@ still be larger than any replacement.
This option can be used with
.B \-\-create
-for determining initial size of an array. For external metadata,
+for determining the initial size of an array. For external metadata,
it can be used on a volume, but not on a container itself.
-Setting initial size of
+Setting the initial size of
.B RAID 0
array is only valid for external metadata.
@@ -545,20 +545,20 @@ Clustered arrays do not support this parameter yet.
.TP
.BR \-c ", " \-\-chunk=
-Specify chunk size of kilobytes. The default when creating an
+Specify chunk size in kilobytes. The default when creating an
array is 512KB. To ensure compatibility with earlier versions, the
default when building an array with no persistent metadata is 64KB.
This is only meaningful for RAID0, RAID4, RAID5, RAID6, and RAID10.
RAID4, RAID5, RAID6, and RAID10 require the chunk size to be a power
-of 2. In any case it must be a multiple of 4KB.
+of 2, with minimal chunk size being 4KB.
A suffix of 'K', 'M', 'G' or 'T' can be given to indicate Kilobytes,
Megabytes, Gigabytes or Terabytes respectively.
.TP
.BR \-\-rounding=
-Specify rounding factor for a Linear array. The size of each
+Specify the rounding factor for a Linear array. The size of each
component will be rounded down to a multiple of this size.
This is a synonym for
.B \-\-chunk
@@ -655,7 +655,8 @@ option to set subsequent failure modes.
and "flush" will clear any persistent faults.
The layout options for RAID10 are one of 'n', 'o' or 'f' followed
-by a small number. The default is 'n2'. The supported options are:
+by a small number signifying the number of copies of each datablock.
+The default is 'n2'. The supported options are:
.I 'n'
signals 'near' copies. Multiple copies of one data block are at
@@ -673,7 +674,7 @@ signals 'far' copies
(multiple copies have very different offsets).
See md(4) for more detail about 'near', 'offset', and 'far'.
-The number is the number of copies of each datablock. 2 is normal, 3
+As for the number of copies of each data block, 2 is normal, 3
can be useful. This number can be at most equal to the number of
devices in the array. It does not need to divide evenly into that
number (e.g. it is perfectly legal to have an 'n2' layout for an array
@@ -684,7 +685,7 @@ A bug introduced in Linux 3.14 means that RAID0 arrays
started using a different layout. This could lead to
data corruption. Since Linux 5.4 (and various stable releases that received
backports), the kernel will not accept such an array unless
-a layout is explictly set. It can be set to
+a layout is explicitly set. It can be set to
.RB ' original '
or
.RB ' alternate '.
@@ -760,13 +761,13 @@ or by selecting a different consistency policy with
.TP
.BR \-\-bitmap\-chunk=
-Set the chunksize of the bitmap. Each bit corresponds to that many
+Set the chunk size of the bitmap. Each bit corresponds to that many
Kilobytes of storage.
-When using a file based bitmap, the default is to use the smallest
-size that is at-least 4 and requires no more than 2^21 chunks.
+When using a file-based bitmap, the default is to use the smallest
+size that is at least 4 and requires no more than 2^21 chunks.
When using an
.B internal
-bitmap, the chunksize defaults to 64Meg, or larger if necessary to
+bitmap, the chunk size defaults to 64Meg, or larger if necessary to
fit the bitmap into the available space.
A suffix of 'K', 'M', 'G' or 'T' can be given to indicate Kilobytes,
@@ -840,7 +841,7 @@ can be used with that command to avoid the automatic resync.
.BR \-\-backup\-file=
This is needed when
.B \-\-grow
-is used to increase the number of raid-devices in a RAID5 or RAID6 if
+is used to increase the number of raid devices in a RAID5 or RAID6 if
there are no spare devices available, or to shrink, change RAID level
or layout. See the GROW MODE section below on RAID\-DEVICES CHANGES.
The file must be stored on a separate device, not on the RAID array
@@ -879,7 +880,7 @@ When creating an array,
.B \-\-data\-offset
can be specified as
.BR variable .
-In the case each member device is expected to have a offset appended
+In the case each member device is expected to have an offset appended
to the name, separated by a colon. This makes it possible to recreate
exactly an array which has varying data offsets (as can happen when
different versions of
@@ -943,7 +944,7 @@ Insist that
.I mdadm
accept the geometry and layout specified without question. Normally
.I mdadm
-will not allow creation of an array with only one device, and will try
+will not allow the creation of an array with only one device, and will try
to create a RAID5 array with one missing drive (as this makes the
initial resync work faster). With
.BR \-\-force ,
@@ -1004,7 +1005,7 @@ number added, e.g.
If the md device name is in a 'standard' format as described in DEVICE
NAMES, then it will be created, if necessary, with the appropriate
device number based on that name. If the device name is not in one of these
-formats, then a unused device number will be allocated. The device
+formats, then an unused device number will be allocated. The device
number will be considered unused if there is no active array for that
number, and there is no entry in /dev for that number and with a
non-standard name. Names that are not in 'standard' format are only
@@ -1032,25 +1033,25 @@ then
.B \-\-add
can be used to add some extra devices to be included in the array.
In most cases this is not needed as the extra devices can be added as
-spares first, and then the number of raid-disks can be changed.
-However for RAID0, it is not possible to add spares. So to increase
+spares first, and then the number of raid disks can be changed.
+However, for RAID0 it is not possible to add spares. So to increase
the number of devices in a RAID0, it is necessary to set the new
number of devices, and to add the new devices, in the same command.
.TP
.BR \-\-nodes
-Only works when the array is for clustered environment. It specifies
+Only works when the array is created for a clustered environment. It specifies
the maximum number of nodes in the cluster that will use this device
simultaneously. If not specified, this defaults to 4.
.TP
.BR \-\-write-journal
Specify journal device for the RAID-4/5/6 array. The journal device
-should be a SSD with reasonable lifetime.
+should be an SSD with a reasonable lifetime.
.TP
.BR \-k ", " \-\-consistency\-policy=
-Specify how the array maintains consistency in case of unexpected shutdown.
+Specify how the array maintains consistency in the case of an unexpected shutdown.
Only relevant for RAID levels with redundancy.
Currently supported options are:
.RS
@@ -1058,7 +1059,7 @@ Currently supported options are:
.TP
.B resync
Full resync is performed and all redundancy is regenerated when the array is
-started after unclean shutdown.
+started after an unclean shutdown.
.TP
.B bitmap
@@ -1067,8 +1068,8 @@ Resync assisted by a write-intent bitmap. Implicitly selected when using
.TP
.B journal
-For RAID levels 4/5/6, journal device is used to log transactions and replay
-after unclean shutdown. Implicitly selected when using
+For RAID levels 4/5/6, the journal device is used to log transactions and replay
+after an unclean shutdown. Implicitly selected when using
.BR \-\-write\-journal .
.TP
@@ -1237,7 +1238,7 @@ This can be useful if
reports a different "Preferred Minor" to
.BR \-\-detail .
In some cases this update will be performed automatically
-by the kernel driver. In particular the update happens automatically
+by the kernel driver. In particular, the update happens automatically
at the first write to an array with redundancy (RAID level 1 or
greater) on a 2.6 (or later) kernel.
@@ -1277,7 +1278,7 @@ For version-1 superblocks, this involves updating the name.
The
.B home\-cluster
option will change the cluster name as recorded in the superblock and
-bitmap. This option only works for clustered environment.
+bitmap. This option only works for a clustered environment.
The
.B resync
@@ -1390,10 +1391,10 @@ This option should be used with great caution.
.TP
.BR \-\-freeze\-reshape
-Option is intended to be used in start-up scripts during initrd boot phase.
-When array under reshape is assembled during initrd phase, this option
-stops reshape after reshape critical section is being restored. This happens
-before file system pivot operation and avoids loss of file system context.
+This option is intended to be used in start-up scripts during the initrd boot phase.
+When the array under reshape is assembled during the initrd phase, this option
+stops the reshape after the reshape-critical section has been restored. This happens
+before the file system pivot operation and avoids loss of filesystem context.
Losing file system context would cause reshape to be broken.
Reshape can be continued later using the
@@ -1437,9 +1438,9 @@ re\-add a device that was previously removed from an array.
If the metadata on the device reports that it is a member of the
array, and the slot that it used is still vacant, then the device will
be added back to the array in the same position. This will normally
-cause the data for that device to be recovered. However based on the
+cause the data for that device to be recovered. However, based on the
event count on the device, the recovery may only require sections that
-are flagged a write-intent bitmap to be recovered or may not require
+are flagged by a write-intent bitmap to be recovered or may not require
any recovery at all.
When used on an array that has no metadata (i.e. it was built with
@@ -1447,13 +1448,12 @@ When used on an array that has no metadata (i.e. it was built with
it will be assumed that bitmap-based recovery is enough to make the
device fully consistent with the array.
-When used with v1.x metadata,
.B \-\-re\-add
-can be accompanied by
+can also be accompanied by
.BR \-\-update=devicesize ,
.BR \-\-update=bbl ", or"
.BR \-\-update=no\-bbl .
-See the description of these option when used in Assemble mode for an
+See descriptions of these options when used in Assemble mode for an
explanation of their use.
If the device name given is
@@ -1480,7 +1480,7 @@ Add a device as a spare. This is similar to
except that it does not attempt
.B \-\-re\-add
first. The device will be added as a spare even if it looks like it
-could be an recent member of the array.
+could be a recent member of the array.
.TP
.BR \-r ", " \-\-remove
@@ -1497,12 +1497,12 @@ and names like
.B set-A
can be given to
.BR \-\-remove .
-The first causes all failed device to be removed. The second causes
+The first causes all failed devices to be removed. The second causes
any device which is no longer connected to the system (i.e an 'open'
returns
.BR ENXIO )
to be removed.
-The third will remove a set as describe below under
+The third will remove a set as described below under
.BR \-\-fail .
.TP
@@ -1519,7 +1519,7 @@ For RAID10 arrays where the number of copies evenly divides the number
of devices, the devices can be conceptually divided into sets where
each set contains a single complete copy of the data on the array.
Sometimes a RAID10 array will be configured so that these sets are on
-separate controllers. In this case all the devices in one set can be
+separate controllers. In this case, all the devices in one set can be
failed by giving a name like
.B set\-A
or
@@ -1549,9 +1549,9 @@ This can follow a list of
.B \-\-replace
devices. The devices listed after
.B \-\-with
-will be preferentially used to replace the devices listed after
+will preferentially be used to replace the devices listed after
.BR \-\-replace .
-These device must already be spare devices in the array.
+These devices must already be spare devices in the array.
.TP
.BR \-\-write\-mostly
@@ -1574,8 +1574,8 @@ the device is found or <slot>:missing in case the device is not found.
.TP
.BR \-\-add-journal
-Add journal to an existing array, or recreate journal for RAID-4/5/6 array
-that lost a journal device. To avoid interrupting on-going write opertions,
+Add a journal to an existing array, or recreate journal for a RAID-4/5/6 array
+that lost a journal device. To avoid interrupting ongoing write operations,
.B \-\-add-journal
only works for array in Read-Only state.
@@ -1631,9 +1631,9 @@ Print details of one or more md devices.
.TP
.BR \-\-detail\-platform
Print details of the platform's RAID capabilities (firmware / hardware
-topology) for a given metadata format. If used without argument, mdadm
+topology) for a given metadata format. If used without an argument, mdadm
will scan all controllers looking for their capabilities. Otherwise, mdadm
-will only look at the controller specified by the argument in form of an
+will only look at the controller specified by the argument in the form of an
absolute filepath or a link, e.g.
.IR /sys/devices/pci0000:00/0000:00:1f.2 .
@@ -1742,8 +1742,8 @@ the block where the superblock would be is overwritten even if it
doesn't appear to be valid.
.B Note:
-Be careful to call \-\-zero\-superblock with clustered raid, make sure
-array isn't used or assembled in other cluster node before execute it.
+Be careful when calling \-\-zero\-superblock with clustered raid. Make sure
+the array isn't used or assembled in another cluster node before executing it.
.TP
.B \-\-kill\-subarray=
@@ -1790,7 +1790,7 @@ For each md device given, or each device in /proc/mdstat if
is given, arrange for the array to be marked clean as soon as possible.
.I mdadm
will return with success if the array uses external metadata and we
-successfully waited. For native arrays this returns immediately as the
+successfully waited. For native arrays, this returns immediately as the
kernel handles dirty-clean transitions at shutdown. No action is taken
if safe-mode handling is disabled.
@@ -1830,7 +1830,7 @@ uses to help track which arrays are currently being assembled.
.TP
.BR \-\-run ", " \-R
-Run any array assembled as soon as a minimal number of devices are
+Run any array assembled as soon as a minimal number of devices is
available, rather than waiting until all expected devices are present.
.TP
@@ -1860,7 +1860,7 @@ Only used with \-\-fail. The 'path' given will be recorded so that if
a new device appears at the same location it can be automatically
added to the same array. This allows the failed device to be
automatically replaced by a new device without metadata if it appears
-at specified path. This option is normally only set by a
+at specified path. This option is normally only set by an
.I udev
script.
@@ -1961,7 +1961,7 @@ Usage:
.PP
This usage assembles one or more RAID arrays from pre-existing components.
For each array, mdadm needs to know the md device, the identity of the
-array, and a number of component-devices. These can be found in a number of ways.
+array, and the number of component devices. These can be found in a number of ways.
In the first usage example (without the
.BR \-\-scan )
@@ -2001,7 +2001,7 @@ The config file is only used if explicitly named with
.B \-\-config
or requested with (a possibly implicit)
.BR \-\-scan .
-In the later case, default config file is used. See
+In the latter case, the default config file is used. See
.BR mdadm.conf (5)
for more details.
@@ -2039,14 +2039,14 @@ detects that udev is not configured, it will create the devices in
.B /dev
itself.
-In Linux kernels prior to version 2.6.28 there were two distinctly
-different types of md devices that could be created: one that could be
+In Linux kernels prior to version 2.6.28 there were two distinct
+types of md devices that could be created: one that could be
partitioned using standard partitioning tools and one that could not.
-Since 2.6.28 that distinction is no longer relevant as both type of
+Since 2.6.28 that distinction is no longer relevant as both types of
devices can be partitioned.
.I mdadm
will normally create the type that originally could not be partitioned
-as it has a well defined major number (9).
+as it has a well-defined major number (9).
Prior to 2.6.28, it is important that mdadm chooses the correct type
of array device to use. This can be controlled with the
@@ -2066,7 +2066,7 @@ can also be given in the configuration file as a word starting
.B auto=
on the ARRAY line for the relevant array.
-.SS Auto Assembly
+.SS Auto-Assembly
When
.B \-\-assemble
is used with
@@ -2122,11 +2122,11 @@ See
.IR mdadm.conf (5)
for further details.
-Note: Auto assembly cannot be used for assembling and activating some
+Note: Auto-assembly cannot be used for assembling and activating some
arrays which are undergoing reshape. In particular as the
.B backup\-file
-cannot be given, any reshape which requires a backup-file to continue
-cannot be started by auto assembly. An array which is growing to more
+cannot be given, any reshape which requires a backup file to continue
+cannot be started by auto-assembly. An array which is growing to more
devices and has passed the critical section can be assembled using
auto-assembly.
@@ -2233,7 +2233,7 @@ When creating a partition based array, using
.I mdadm
with version-1.x metadata, the partition type should be set to
.B 0xDA
-(non fs-data). This type selection allows for greater precision since
+(non fs-data). This type of selection allows for greater precision since
using any other [RAID auto-detect (0xFD) or a GNU/Linux partition (0x83)],
might create problems in the event of array recovery through a live cdrom.
@@ -2249,7 +2249,7 @@ when creating a v0.90 array will silently override any
setting.
.\"If the
.\".B \-\-size
-.\"option is given, it is not necessary to list any component-devices in this command.
+.\"option is given, it is not necessary to list any component devices in this command.
.\"They can be added later, before a
.\".B \-\-run.
.\"If no
@@ -2263,7 +2263,7 @@ requested with the
.B \-\-bitmap
option or a different consistency policy is selected with the
.B \-\-consistency\-policy
-option. In any case space for a bitmap will be reserved so that one
+option. In any case, space for a bitmap will be reserved so that one
can be added later with
.BR "\-\-grow \-\-bitmap=internal" .
@@ -2313,7 +2313,7 @@ will firstly mark
as faulty in
.B /dev/md0
and will then remove it from the array and finally add it back
-in as a spare. However only one md array can be affected by a single
+in as a spare. However, only one md array can be affected by a single
command.
When a device is added to an active array, mdadm checks to see if it
@@ -2458,14 +2458,14 @@ config file to be examined.
If the device contains RAID metadata, a file will be created in the
.I directory
and the metadata will be written to it. The file will be the same
-size as the device and have the metadata written in the file at the
-same locate that it exists in the device. However the file will be "sparse" so
+size as the device and will have the metadata written at the
+same location as it exists in the device. However, the file will be "sparse" so
that only those blocks containing metadata will be allocated. The
total space used will be small.
-The file name used in the
+The filename used in the
.I directory
-will be the base name of the device. Further if any links appear in
+will be the base name of the device. Further, if any links appear in
.I /dev/disk/by-id
which point to the device, then hard links to the file will be created
in
@@ -2567,7 +2567,7 @@ and if the destination array has a failed drive but no spares.
If any devices are listed on the command line,
.I mdadm
-will only monitor those devices. Otherwise all arrays listed in the
+will only monitor those devices, otherwise, all arrays listed in the
configuration file will be monitored. Further, if
.B \-\-scan
is given, then any other md devices that appear in
@@ -2624,10 +2624,10 @@ check, repair). (syslog priority: Warning)
.BI Rebuild NN
Where
.I NN
-is a two-digit number (ie. 05, 48). This indicates that rebuild
-has passed that many percent of the total. The events are generated
-with fixed increment since 0. Increment size may be specified with
-a commandline option (default is 20). (syslog priority: Warning)
+is a two-digit number (eg. 05, 48). This indicates that the rebuild
+has reached that percentage of the total. The events are generated
+at a fixed increment from 0. The increment size may be specified with
+a command-line option (the default is 20). (syslog priority: Warning)
.TP
.B RebuildFinished
@@ -2735,8 +2735,8 @@ When
detects that an array in a spare group has fewer active
devices than necessary for the complete array, and has no spare
devices, it will look for another array in the same spare group that
-has a full complement of working drive and a spare. It will then
-attempt to remove the spare from the second drive and add it to the
+has a full complement of working drives and a spare. It will then
+attempt to remove the spare from the second array and add it to the
first.
If the removal succeeds but the adding fails, then it is added back to
the original array.
@@ -2750,10 +2750,8 @@ and then follow similar steps as above if a matching spare is found.
.SH GROW MODE
The GROW mode is used for changing the size or shape of an active
array.
-For this to work, the kernel must support the necessary change.
-Various types of growth are being added during 2.6 development.
-Currently the supported changes include
+During the kernel 2.6 era the following changes were added:
.IP \(bu 4
change the "size" attribute for RAID1, RAID4, RAID5 and RAID6.
.IP \(bu 4
@@ -2796,8 +2794,8 @@ use more than half of a spare device for backup space.
.SS SIZE CHANGES
Normally when an array is built the "size" is taken from the smallest
-of the drives. If all the small drives in an arrays are, one at a
-time, removed and replaced with larger drives, then you could have an
+of the drives. If all the small drives in an arrays are, over time,
+removed and replaced with larger drives, then you could have an
array of large drives with only a small amount used. In this
situation, changing the "size" with "GROW" mode will allow the extra
space to start being used. If the size is increased in this way, a
@@ -2812,7 +2810,7 @@ after growing, or to reduce its size
.B prior
to shrinking the array.
-Also the size of an array cannot be changed while it has an active
+Also, the size of an array cannot be changed while it has an active
bitmap. If an array has a bitmap, it must be removed before the size
can be changed. Once the change is complete a new bitmap can be created.
@@ -2892,7 +2890,7 @@ long time. A
is required. If the array is not simultaneously being grown or
shrunk, so that the array size will remain the same - for example,
reshaping a 3-drive RAID5 into a 4-drive RAID6 - the backup file will
-be used not just for a "cricital section" but throughout the reshape
+be used not just for a "critical section" but throughout the reshape
operation, as described below under LAYOUT CHANGES.
.SS CHUNK-SIZE AND LAYOUT CHANGES
@@ -2910,7 +2908,7 @@ slowly.
If the reshape is interrupted for any reason, this backup file must be
made available to
.B "mdadm --assemble"
-so the array can be reassembled. Consequently the file cannot be
+so the array can be reassembled. Consequently, the file cannot be
stored on the device being reshaped.
--
2.38.1

View File

@ -0,0 +1,91 @@
From fc6fd4063769f4194c3fb8f77b32b2819e140fb9 Mon Sep 17 00:00:00 2001
From: Mateusz Kusiak <mateusz.kusiak@intel.com>
Date: Thu, 18 Aug 2022 11:47:21 +0200
Subject: [PATCH 55/83] Manage: Block unsafe member failing
Kernel may or may not block mdadm from removing member device if it
will cause arrays failed state. It depends on raid personality
implementation in kernel.
Add verification on requested removal path (#mdadm --set-faulty
command).
Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Manage.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 52 insertions(+), 1 deletion(-)
diff --git a/Manage.c b/Manage.c
index a142f8bd..b1d0e630 100644
--- a/Manage.c
+++ b/Manage.c
@@ -1285,6 +1285,50 @@ int Manage_with(struct supertype *tst, int fd, struct mddev_dev *dv,
return -1;
}
+/**
+ * is_remove_safe() - Check if remove is safe.
+ * @array: Array info.
+ * @fd: Array file descriptor.
+ * @devname: Name of device to remove.
+ * @verbose: Verbose.
+ *
+ * The function determines if array will be operational
+ * after removing &devname.
+ *
+ * Return: True if array will be operational, false otherwise.
+ */
+bool is_remove_safe(mdu_array_info_t *array, const int fd, char *devname, const int verbose)
+{
+ dev_t devid = devnm2devid(devname + 5);
+ struct mdinfo *mdi = sysfs_read(fd, NULL, GET_DEVS | GET_DISKS | GET_STATE);
+
+ if (!mdi) {
+ if (verbose)
+ pr_err("Failed to read sysfs attributes for %s\n", devname);
+ return false;
+ }
+
+ char *avail = xcalloc(array->raid_disks, sizeof(char));
+
+ for (mdi = mdi->devs; mdi; mdi = mdi->next) {
+ if (mdi->disk.raid_disk < 0)
+ continue;
+ if (!(mdi->disk.state & (1 << MD_DISK_SYNC)))
+ continue;
+ if (makedev(mdi->disk.major, mdi->disk.minor) == devid)
+ continue;
+ avail[mdi->disk.raid_disk] = 1;
+ }
+ sysfs_free(mdi);
+
+ bool is_enough = enough(array->level, array->raid_disks,
+ array->layout, (array->state & 1),
+ avail);
+
+ free(avail);
+ return is_enough;
+}
+
int Manage_subdevs(char *devname, int fd,
struct mddev_dev *devlist, int verbose, int test,
char *update, int force)
@@ -1598,7 +1642,14 @@ int Manage_subdevs(char *devname, int fd,
break;
case 'f': /* set faulty */
- /* FIXME check current member */
+ if (!is_remove_safe(&array, fd, dv->devname, verbose)) {
+ pr_err("Cannot remove %s from %s, array will be failed.\n",
+ dv->devname, devname);
+ if (sysfd >= 0)
+ close(sysfd);
+ goto abort;
+ }
+
if ((sysfd >= 0 && write(sysfd, "faulty", 6) != 6) ||
(sysfd < 0 && ioctl(fd, SET_DISK_FAULTY,
rdev))) {
--
2.38.1

View File

@ -0,0 +1,112 @@
From 55c10e4de13abe3e6934895e1fff7d2d20d0b2c2 Mon Sep 17 00:00:00 2001
From: Pawel Baldysiak <pawel.baldysiak@intel.com>
Date: Thu, 1 Sep 2022 11:20:31 +0200
Subject: [PATCH 56/83] Monitor: Fix statelist memory leaks
Free statelist in error path in Monitor initialization.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Monitor.c | 40 +++++++++++++++++++++++++++++++---------
1 file changed, 31 insertions(+), 9 deletions(-)
diff --git a/Monitor.c b/Monitor.c
index 93f36ac0..b4e954c6 100644
--- a/Monitor.c
+++ b/Monitor.c
@@ -74,6 +74,7 @@ static int add_new_arrays(struct mdstat_ent *mdstat, struct state **statelist,
int test, struct alert_info *info);
static void try_spare_migration(struct state *statelist, struct alert_info *info);
static void link_containers_with_subarrays(struct state *list);
+static void free_statelist(struct state *statelist);
#ifndef NO_LIBUDEV
static int check_udev_activity(void);
#endif
@@ -128,7 +129,6 @@ int Monitor(struct mddev_dev *devlist,
*/
struct state *statelist = NULL;
- struct state *st2;
int finished = 0;
struct mdstat_ent *mdstat = NULL;
char *mailfrom;
@@ -185,12 +185,14 @@ int Monitor(struct mddev_dev *devlist,
continue;
if (strcasecmp(mdlist->devname, "<ignore>") == 0)
continue;
+ if (!is_mddev(mdlist->devname)) {
+ free_statelist(statelist);
+ return 1;
+ }
st = xcalloc(1, sizeof *st);
snprintf(st->devname, MD_NAME_MAX + sizeof("/dev/md/"),
"/dev/md/%s", basename(mdlist->devname));
- if (!is_mddev(mdlist->devname))
- return 1;
st->next = statelist;
st->devnm[0] = 0;
st->percent = RESYNC_UNKNOWN;
@@ -206,8 +208,10 @@ int Monitor(struct mddev_dev *devlist,
for (dv = devlist; dv; dv = dv->next) {
struct state *st;
- if (!is_mddev(dv->devname))
+ if (!is_mddev(dv->devname)) {
+ free_statelist(statelist);
return 1;
+ }
st = xcalloc(1, sizeof *st);
mdlist = conf_get_ident(dv->devname);
@@ -294,16 +298,16 @@ int Monitor(struct mddev_dev *devlist,
for (stp = &statelist; (st = *stp) != NULL; ) {
if (st->from_auto && st->err > 5) {
*stp = st->next;
- free(st->spare_group);
+ if (st->spare_group)
+ free(st->spare_group);
+
free(st);
} else
stp = &st->next;
}
}
- for (st2 = statelist; st2; st2 = statelist) {
- statelist = st2->next;
- free(st2);
- }
+
+ free_statelist(statelist);
if (pidfile)
unlink(pidfile);
@@ -1056,6 +1060,24 @@ static void link_containers_with_subarrays(struct state *list)
}
}
+/**
+ * free_statelist() - Frees statelist.
+ * @statelist: statelist to free
+ */
+static void free_statelist(struct state *statelist)
+{
+ struct state *tmp = NULL;
+
+ while (statelist) {
+ if (statelist->spare_group)
+ free(statelist->spare_group);
+
+ tmp = statelist;
+ statelist = statelist->next;
+ free(tmp);
+ }
+}
+
#ifndef NO_LIBUDEV
/* function: check_udev_activity
* Description: Function waits for udev to finish
--
2.38.1

View File

@ -0,0 +1,64 @@
From ea7a02a3294aae223e1329aed5da7f4aa3ac05c5 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Old=C5=99ich=20Jedli=C4=8Dka?= <oldium.pro@gmail.com>
Date: Wed, 31 Aug 2022 19:57:29 +0200
Subject: [PATCH 57/83] mdadm: added support for Intel Alderlake RST on VMD
platform
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Alderlake RST on VMD uses RstVmdV UEFI variable name, so detect it.
Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
Reviewed-by: Kinga Tanska <kinga.tanska@linux.intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
platform-intel.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/platform-intel.c b/platform-intel.c
index 5a8729e7..757f0b1b 100644
--- a/platform-intel.c
+++ b/platform-intel.c
@@ -512,7 +512,8 @@ static const struct imsm_orom *find_imsm_hba_orom(struct sys_dev *hba)
#define AHCI_PROP "RstSataV"
#define AHCI_SSATA_PROP "RstsSatV"
#define AHCI_TSATA_PROP "RsttSatV"
-#define VMD_PROP "RstUefiV"
+#define VROC_VMD_PROP "RstUefiV"
+#define RST_VMD_PROP "RstVmdV"
#define VENDOR_GUID \
EFI_GUID(0x193dfefa, 0xa445, 0x4302, 0x99, 0xd8, 0xef, 0x3a, 0xad, 0x1a, 0x04, 0xc6)
@@ -605,6 +606,7 @@ const struct imsm_orom *find_imsm_efi(struct sys_dev *hba)
struct orom_entry *ret;
static const char * const sata_efivars[] = {AHCI_PROP, AHCI_SSATA_PROP,
AHCI_TSATA_PROP};
+ static const char * const vmd_efivars[] = {VROC_VMD_PROP, RST_VMD_PROP};
unsigned long i;
if (check_env("IMSM_TEST_AHCI_EFI") || check_env("IMSM_TEST_SCU_EFI"))
@@ -636,10 +638,16 @@ const struct imsm_orom *find_imsm_efi(struct sys_dev *hba)
break;
case SYS_DEV_VMD:
- if (!read_efi_variable(&orom, sizeof(orom), VMD_PROP,
- VENDOR_GUID))
- break;
- return NULL;
+ for (i = 0; i < ARRAY_SIZE(vmd_efivars); i++) {
+ if (!read_efi_variable(&orom, sizeof(orom),
+ vmd_efivars[i], VENDOR_GUID))
+ break;
+ }
+
+ if (i == ARRAY_SIZE(vmd_efivars))
+ return NULL;
+
+ break;
default:
return NULL;
}
--
2.38.1

View File

@ -0,0 +1,111 @@
From ea109700563d93704ebdc540c7770d874369f667 Mon Sep 17 00:00:00 2001
From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Date: Fri, 9 Sep 2022 15:50:33 +0200
Subject: [PATCH 58/83] mdadm: Add Documentation entries to systemd services
Add documentation section.
Copied from Debian.
Cc: Felix Lechner <felix.lechner@lease-up.com>
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
systemd/mdadm-grow-continue@.service | 1 +
systemd/mdadm-last-resort@.service | 1 +
systemd/mdcheck_continue.service | 3 ++-
systemd/mdcheck_start.service | 1 +
systemd/mdmon@.service | 1 +
systemd/mdmonitor-oneshot.service | 1 +
systemd/mdmonitor.service | 1 +
7 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/systemd/mdadm-grow-continue@.service b/systemd/mdadm-grow-continue@.service
index 9fdc8ec7..64b8254a 100644
--- a/systemd/mdadm-grow-continue@.service
+++ b/systemd/mdadm-grow-continue@.service
@@ -8,6 +8,7 @@
[Unit]
Description=Manage MD Reshape on /dev/%I
DefaultDependencies=no
+Documentation=man:mdadm(8)
[Service]
ExecStart=BINDIR/mdadm --grow --continue /dev/%I
diff --git a/systemd/mdadm-last-resort@.service b/systemd/mdadm-last-resort@.service
index efeb3f63..e9381125 100644
--- a/systemd/mdadm-last-resort@.service
+++ b/systemd/mdadm-last-resort@.service
@@ -2,6 +2,7 @@
Description=Activate md array %I even though degraded
DefaultDependencies=no
ConditionPathExists=!/sys/devices/virtual/block/%i/md/sync_action
+Documentation=man:mdadm(8)
[Service]
Type=oneshot
diff --git a/systemd/mdcheck_continue.service b/systemd/mdcheck_continue.service
index 854317f1..f5324905 100644
--- a/systemd/mdcheck_continue.service
+++ b/systemd/mdcheck_continue.service
@@ -7,7 +7,8 @@
[Unit]
Description=MD array scrubbing - continuation
-ConditionPathExistsGlob = /var/lib/mdcheck/MD_UUID_*
+ConditionPathExistsGlob=/var/lib/mdcheck/MD_UUID_*
+Documentation=man:mdadm(8)
[Service]
Type=oneshot
diff --git a/systemd/mdcheck_start.service b/systemd/mdcheck_start.service
index 3bb3d130..703a6583 100644
--- a/systemd/mdcheck_start.service
+++ b/systemd/mdcheck_start.service
@@ -8,6 +8,7 @@
[Unit]
Description=MD array scrubbing
Wants=mdcheck_continue.timer
+Documentation=man:mdadm(8)
[Service]
Type=oneshot
diff --git a/systemd/mdmon@.service b/systemd/mdmon@.service
index 77533958..97a1acd9 100644
--- a/systemd/mdmon@.service
+++ b/systemd/mdmon@.service
@@ -9,6 +9,7 @@
Description=MD Metadata Monitor on /dev/%I
DefaultDependencies=no
Before=initrd-switch-root.target
+Documentation=man:mdmon(8)
[Service]
# mdmon should never complain due to lack of a platform,
diff --git a/systemd/mdmonitor-oneshot.service b/systemd/mdmonitor-oneshot.service
index 373955a2..ba86b44e 100644
--- a/systemd/mdmonitor-oneshot.service
+++ b/systemd/mdmonitor-oneshot.service
@@ -7,6 +7,7 @@
[Unit]
Description=Reminder for degraded MD arrays
+Documentation=man:mdadm(8)
[Service]
Environment=MDADM_MONITOR_ARGS=--scan
diff --git a/systemd/mdmonitor.service b/systemd/mdmonitor.service
index 46f7b880..9c364785 100644
--- a/systemd/mdmonitor.service
+++ b/systemd/mdmonitor.service
@@ -8,6 +8,7 @@
[Unit]
Description=MD array monitor
DefaultDependencies=no
+Documentation=man:mdadm(8)
[Service]
Environment= MDADM_MONITOR_ARGS=--scan
--
2.38.1

View File

@ -0,0 +1,32 @@
From f7cbd810b639eb946ba1b3bddb1faefb9696de42 Mon Sep 17 00:00:00 2001
From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Date: Fri, 9 Sep 2022 15:50:34 +0200
Subject: [PATCH 59/83] ReadMe: fix command-line help
Make command-line help consistent with manual page.
Copied from Debian.
Cc: Felix Lechner <felix.lechner@lease-up.com>
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
ReadMe.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/ReadMe.c b/ReadMe.c
index 7f94847e..50a5e36d 100644
--- a/ReadMe.c
+++ b/ReadMe.c
@@ -477,7 +477,7 @@ char Help_assemble[] =
;
char Help_manage[] =
-"Usage: mdadm arraydevice options component devices...\n"
+"Usage: mdadm [mode] arraydevice [options] <component devices...>\n"
"\n"
"This usage is for managing the component devices within an array.\n"
"The --manage option is not needed and is assumed if the first argument\n"
--
2.38.1

View File

@ -0,0 +1,257 @@
From 6f2af6a48c541f207cb727a31fb86de2cd04fc21 Mon Sep 17 00:00:00 2001
From: Kinga Tanska <kinga.tanska@intel.com>
Date: Fri, 2 Sep 2022 08:49:23 +0200
Subject: [PATCH 60/83] mdadm: replace container level checking with inline
To unify all containers checks in code, is_container() function is
added and propagated.
Signed-off-by: Kinga Tanska <kinga.tanska@intel.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Assemble.c | 7 +++----
Create.c | 6 +++---
Grow.c | 6 +++---
Incremental.c | 4 ++--
mdadm.h | 14 ++++++++++++++
super-ddf.c | 6 +++---
super-intel.c | 4 ++--
super0.c | 2 +-
super1.c | 2 +-
sysfs.c | 2 +-
10 files changed, 33 insertions(+), 20 deletions(-)
diff --git a/Assemble.c b/Assemble.c
index 1dd82a8c..8b0af0c9 100644
--- a/Assemble.c
+++ b/Assemble.c
@@ -1120,7 +1120,7 @@ static int start_array(int mdfd,
i/2, mddev);
}
- if (content->array.level == LEVEL_CONTAINER) {
+ if (is_container(content->array.level)) {
sysfs_rules_apply(mddev, content);
if (c->verbose >= 0) {
pr_err("Container %s has been assembled with %d drive%s",
@@ -1549,8 +1549,7 @@ try_again:
*/
trustworthy = LOCAL;
- if (name[0] == 0 &&
- content->array.level == LEVEL_CONTAINER) {
+ if (!name[0] && is_container(content->array.level)) {
name = content->text_version;
trustworthy = METADATA;
}
@@ -1809,7 +1808,7 @@ try_again:
}
#endif
}
- if (c->force && !clean && content->array.level != LEVEL_CONTAINER &&
+ if (c->force && !clean && !is_container(content->array.level) &&
!enough(content->array.level, content->array.raid_disks,
content->array.layout, clean, avail)) {
change += st->ss->update_super(st, content, "force-array",
diff --git a/Create.c b/Create.c
index e06ec2ae..953e7372 100644
--- a/Create.c
+++ b/Create.c
@@ -487,7 +487,7 @@ int Create(struct supertype *st, char *mddev,
st->minor_version >= 1)
/* metadata at front */
warn |= check_partitions(fd, dname, 0, 0);
- else if (s->level == 1 || s->level == LEVEL_CONTAINER ||
+ else if (s->level == 1 || is_container(s->level) ||
(s->level == 0 && s->raiddisks == 1))
/* partitions could be meaningful */
warn |= check_partitions(fd, dname, freesize*2, s->size*2);
@@ -997,7 +997,7 @@ int Create(struct supertype *st, char *mddev,
* again returns container info.
*/
st->ss->getinfo_super(st, &info_new, NULL);
- if (st->ss->external && s->level != LEVEL_CONTAINER &&
+ if (st->ss->external && !is_container(s->level) &&
!same_uuid(info_new.uuid, info.uuid, 0)) {
map_update(&map, fd2devnm(mdfd),
info_new.text_version,
@@ -1040,7 +1040,7 @@ int Create(struct supertype *st, char *mddev,
map_unlock(&map);
free(infos);
- if (s->level == LEVEL_CONTAINER) {
+ if (is_container(s->level)) {
/* No need to start. But we should signal udev to
* create links */
sysfs_uevent(&info, "change");
diff --git a/Grow.c b/Grow.c
index 0f07a894..e362403a 100644
--- a/Grow.c
+++ b/Grow.c
@@ -2175,7 +2175,7 @@ size_change_error:
devname, s->size);
}
changed = 1;
- } else if (array.level != LEVEL_CONTAINER) {
+ } else if (!is_container(array.level)) {
s->size = get_component_size(fd)/2;
if (s->size == 0)
s->size = array.size;
@@ -2231,7 +2231,7 @@ size_change_error:
info.component_size = s->size*2;
info.new_level = s->level;
info.new_chunk = s->chunk * 1024;
- if (info.array.level == LEVEL_CONTAINER) {
+ if (is_container(info.array.level)) {
info.delta_disks = UnSet;
info.array.raid_disks = s->raiddisks;
} else if (s->raiddisks)
@@ -2344,7 +2344,7 @@ size_change_error:
printf("layout for %s set to %d\n",
devname, array.layout);
}
- } else if (array.level == LEVEL_CONTAINER) {
+ } else if (is_container(array.level)) {
/* This change is to be applied to every array in the
* container. This is only needed when the metadata imposes
* restraints of the various arrays in the container.
diff --git a/Incremental.c b/Incremental.c
index 4d0cd9d6..5a5f4c4c 100644
--- a/Incremental.c
+++ b/Incremental.c
@@ -244,7 +244,7 @@ int Incremental(struct mddev_dev *devlist, struct context *c,
c->autof = ci->autof;
name_to_use = info.name;
- if (name_to_use[0] == 0 && info.array.level == LEVEL_CONTAINER) {
+ if (name_to_use[0] == 0 && is_container(info.array.level)) {
name_to_use = info.text_version;
trustworthy = METADATA;
}
@@ -472,7 +472,7 @@ int Incremental(struct mddev_dev *devlist, struct context *c,
/* 7/ Is there enough devices to possibly start the array? */
/* 7a/ if not, finish with success. */
- if (info.array.level == LEVEL_CONTAINER) {
+ if (is_container(info.array.level)) {
char devnm[32];
/* Try to assemble within the container */
sysfs_uevent(sra, "change");
diff --git a/mdadm.h b/mdadm.h
index 941a5f38..3673494e 100644
--- a/mdadm.h
+++ b/mdadm.h
@@ -1924,3 +1924,17 @@ enum r0layout {
* This is true for native and DDF, IMSM allows 16.
*/
#define MD_NAME_MAX 32
+
+/**
+ * is_container() - check if @level is &LEVEL_CONTAINER
+ * @level: level value
+ *
+ * return:
+ * 1 if level is equal to &LEVEL_CONTAINER, 0 otherwise.
+ */
+static inline int is_container(const int level)
+{
+ if (level == LEVEL_CONTAINER)
+ return 1;
+ return 0;
+}
diff --git a/super-ddf.c b/super-ddf.c
index 949e7d15..9d1e3b94 100644
--- a/super-ddf.c
+++ b/super-ddf.c
@@ -3325,7 +3325,7 @@ validate_geometry_ddf_container(struct supertype *st,
int fd;
unsigned long long ldsize;
- if (level != LEVEL_CONTAINER)
+ if (!is_container(level))
return 0;
if (!dev)
return 1;
@@ -3371,7 +3371,7 @@ static int validate_geometry_ddf(struct supertype *st,
if (level == LEVEL_NONE)
level = LEVEL_CONTAINER;
- if (level == LEVEL_CONTAINER) {
+ if (is_container(level)) {
/* Must be a fresh device to add to a container */
return validate_geometry_ddf_container(st, level, raiddisks,
data_offset, dev,
@@ -3488,7 +3488,7 @@ static int validate_geometry_ddf_bvd(struct supertype *st,
struct dl *dl;
unsigned long long maxsize;
/* ddf/bvd supports lots of things, but not containers */
- if (level == LEVEL_CONTAINER) {
+ if (is_container(level)) {
if (verbose)
pr_err("DDF cannot create a container within an container\n");
return 0;
diff --git a/super-intel.c b/super-intel.c
index 4d82af3d..b0565610 100644
--- a/super-intel.c
+++ b/super-intel.c
@@ -6727,7 +6727,7 @@ static int validate_geometry_imsm_container(struct supertype *st, int level,
struct intel_super *super = NULL;
int rv = 0;
- if (level != LEVEL_CONTAINER)
+ if (!is_container(level))
return 0;
if (!dev)
return 1;
@@ -7692,7 +7692,7 @@ static int validate_geometry_imsm(struct supertype *st, int level, int layout,
* if given unused devices create a container
* if given given devices in a container create a member volume
*/
- if (level == LEVEL_CONTAINER)
+ if (is_container(level))
/* Must be a fresh device to add to a container */
return validate_geometry_imsm_container(st, level, raiddisks,
data_offset, dev,
diff --git a/super0.c b/super0.c
index 37f595ed..93876e2e 100644
--- a/super0.c
+++ b/super0.c
@@ -1273,7 +1273,7 @@ static int validate_geometry0(struct supertype *st, int level,
if (get_linux_version() < 3001000)
tbmax = 2;
- if (level == LEVEL_CONTAINER) {
+ if (is_container(level)) {
if (verbose)
pr_err("0.90 metadata does not support containers\n");
return 0;
diff --git a/super1.c b/super1.c
index 58345e68..0b505a7e 100644
--- a/super1.c
+++ b/super1.c
@@ -2830,7 +2830,7 @@ static int validate_geometry1(struct supertype *st, int level,
unsigned long long overhead;
int fd;
- if (level == LEVEL_CONTAINER) {
+ if (is_container(level)) {
if (verbose)
pr_err("1.x metadata does not support containers\n");
return 0;
diff --git a/sysfs.c b/sysfs.c
index 0d98a65f..ca1d888f 100644
--- a/sysfs.c
+++ b/sysfs.c
@@ -763,7 +763,7 @@ int sysfs_add_disk(struct mdinfo *sra, struct mdinfo *sd, int resume)
rv = sysfs_set_num(sra, sd, "offset", sd->data_offset);
rv |= sysfs_set_num(sra, sd, "size", (sd->component_size+1) / 2);
- if (sra->array.level != LEVEL_CONTAINER) {
+ if (!is_container(sra->array.level)) {
if (sra->consistency_policy == CONSISTENCY_POLICY_PPL) {
rv |= sysfs_set_num(sra, sd, "ppl_sector", sd->ppl_sector);
rv |= sysfs_set_num(sra, sd, "ppl_size", sd->ppl_size);
--
2.38.1

View File

@ -0,0 +1,58 @@
From 8b668d4aa3305af5963162b7499b128bd71f8f29 Mon Sep 17 00:00:00 2001
From: Lukasz Florczak <lukasz.florczak@linux.intel.com>
Date: Thu, 22 Sep 2022 08:29:50 +0200
Subject: [PATCH 61/83] Mdmonitor: Omit non-md devices
Fix segfault commit [1] introduced check whether given device is
mddevice, but it happend to terminate Mdmonitor if at least one of given
devices didn't fulfill that condition. In result Mdmonitor service was
no longer started on boot (with --scan option) when config contained some
non-existent array entry.
This commit introduces ommiting non-md devices so scan option can still
be used when config is wrong and allow Mdmonitor service to run on boot.
Giving a list of devices to monitor containing non-existing or
non-md devices will result in monitoring only confirmed mddevices.
[1] https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/commit/?id=e702f392959d1c2ad2089e595b52235ed97b4e18
Signed-off-by: Lukasz Florczak <lukasz.florczak@linux.intel.com>
Signed-off-by: Jes Sorensen <jsorensen@fb.com>
---
Monitor.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/Monitor.c b/Monitor.c
index b4e954c6..7d7dc4d2 100644
--- a/Monitor.c
+++ b/Monitor.c
@@ -185,10 +185,8 @@ int Monitor(struct mddev_dev *devlist,
continue;
if (strcasecmp(mdlist->devname, "<ignore>") == 0)
continue;
- if (!is_mddev(mdlist->devname)) {
- free_statelist(statelist);
- return 1;
- }
+ if (!is_mddev(mdlist->devname))
+ continue;
st = xcalloc(1, sizeof *st);
snprintf(st->devname, MD_NAME_MAX + sizeof("/dev/md/"),
@@ -208,10 +206,8 @@ int Monitor(struct mddev_dev *devlist,
for (dv = devlist; dv; dv = dv->next) {
struct state *st;
- if (!is_mddev(dv->devname)) {
- free_statelist(statelist);
- return 1;
- }
+ if (!is_mddev(dv->devname))
+ continue;
st = xcalloc(1, sizeof *st);
mdlist = conf_get_ident(dv->devname);
--
2.38.1

View File

@ -0,0 +1,233 @@
From 3698867194f27fdd7824b8bdd172d619a2c087cc Mon Sep 17 00:00:00 2001
From: Mateusz Grzonka <mateusz.grzonka@intel.com>
Date: Wed, 7 Sep 2022 14:56:49 +0200
Subject: [PATCH 62/83] Mdmonitor: Split alert() into separate functions
Signed-off-by: Mateusz Grzonka <mateusz.grzonka@intel.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
Monitor.c | 186 ++++++++++++++++++++++++++++--------------------------
1 file changed, 95 insertions(+), 91 deletions(-)
diff --git a/Monitor.c b/Monitor.c
index 7d7dc4d2..0036e8cd 100644
--- a/Monitor.c
+++ b/Monitor.c
@@ -66,7 +66,7 @@ struct alert_info {
static int make_daemon(char *pidfile);
static int check_one_sharer(int scan);
static void write_autorebuild_pid(void);
-static void alert(char *event, char *dev, char *disc, struct alert_info *info);
+static void alert(const char *event, const char *dev, const char *disc, struct alert_info *info);
static int check_array(struct state *st, struct mdstat_ent *mdstat,
int test, struct alert_info *info,
int increments, char *prefer);
@@ -407,111 +407,115 @@ static void write_autorebuild_pid()
}
}
-static void alert(char *event, char *dev, char *disc, struct alert_info *info)
+static void execute_alert_cmd(const char *event, const char *dev, const char *disc, struct alert_info *info)
+{
+ int pid = fork();
+
+ switch (pid) {
+ default:
+ waitpid(pid, NULL, 0);
+ break;
+ case -1:
+ pr_err("Cannot fork to execute alert command");
+ break;
+ case 0:
+ execl(info->alert_cmd, info->alert_cmd, event, dev, disc, NULL);
+ exit(2);
+ }
+}
+
+static void send_event_email(const char *event, const char *dev, const char *disc, struct alert_info *info)
+{
+ FILE *mp, *mdstat;
+ char hname[256];
+ char buf[BUFSIZ];
+ int n;
+
+ mp = popen(Sendmail, "w");
+ if (!mp) {
+ pr_err("Cannot open pipe stream for sendmail.\n");
+ return;
+ }
+
+ gethostname(hname, sizeof(hname));
+ signal(SIGPIPE, SIG_IGN);
+ if (info->mailfrom)
+ fprintf(mp, "From: %s\n", info->mailfrom);
+ else
+ fprintf(mp, "From: %s monitoring <root>\n", Name);
+ fprintf(mp, "To: %s\n", info->mailaddr);
+ fprintf(mp, "Subject: %s event on %s:%s\n\n", event, dev, hname);
+ fprintf(mp, "This is an automatically generated mail message. \n");
+ fprintf(mp, "A %s event had been detected on md device %s.\n\n", event, dev);
+
+ if (disc && disc[0] != ' ')
+ fprintf(mp,
+ "It could be related to component device %s.\n\n", disc);
+ if (disc && disc[0] == ' ')
+ fprintf(mp, "Extra information:%s.\n\n", disc);
+
+ mdstat = fopen("/proc/mdstat", "r");
+ if (!mdstat) {
+ pr_err("Cannot open /proc/mdstat\n");
+ pclose(mp);
+ return;
+ }
+
+ fprintf(mp, "The /proc/mdstat file currently contains the following:\n\n");
+ while ((n = fread(buf, 1, sizeof(buf), mdstat)) > 0)
+ n = fwrite(buf, 1, n, mp);
+ fclose(mdstat);
+ pclose(mp);
+}
+
+static void log_event_to_syslog(const char *event, const char *dev, const char *disc)
{
int priority;
+ /* Log at a different severity depending on the event.
+ *
+ * These are the critical events: */
+ if (strncmp(event, "Fail", 4) == 0 ||
+ strncmp(event, "Degrade", 7) == 0 ||
+ strncmp(event, "DeviceDisappeared", 17) == 0)
+ priority = LOG_CRIT;
+ /* Good to know about, but are not failures: */
+ else if (strncmp(event, "Rebuild", 7) == 0 ||
+ strncmp(event, "MoveSpare", 9) == 0 ||
+ strncmp(event, "Spares", 6) != 0)
+ priority = LOG_WARNING;
+ /* Everything else: */
+ else
+ priority = LOG_INFO;
+ if (disc && disc[0] != ' ')
+ syslog(priority,
+ "%s event detected on md device %s, component device %s", event, dev, disc);
+ else if (disc)
+ syslog(priority, "%s event detected on md device %s: %s", event, dev, disc);
+ else
+ syslog(priority, "%s event detected on md device %s", event, dev);
+}
+
+static void alert(const char *event, const char *dev, const char *disc, struct alert_info *info)
+{
if (!info->alert_cmd && !info->mailaddr && !info->dosyslog) {
time_t now = time(0);
printf("%1.15s: %s on %s %s\n", ctime(&now) + 4,
event, dev, disc?disc:"unknown device");
}
- if (info->alert_cmd) {
- int pid = fork();
- switch(pid) {
- default:
- waitpid(pid, NULL, 0);
- break;
- case -1:
- break;
- case 0:
- execl(info->alert_cmd, info->alert_cmd,
- event, dev, disc, NULL);
- exit(2);
- }
- }
+ if (info->alert_cmd)
+ execute_alert_cmd(event, dev, disc, info);
+
if (info->mailaddr && (strncmp(event, "Fail", 4) == 0 ||
strncmp(event, "Test", 4) == 0 ||
strncmp(event, "Spares", 6) == 0 ||
strncmp(event, "Degrade", 7) == 0)) {
- FILE *mp = popen(Sendmail, "w");
- if (mp) {
- FILE *mdstat;
- char hname[256];
-
- gethostname(hname, sizeof(hname));
- signal_s(SIGPIPE, SIG_IGN);
-
- if (info->mailfrom)
- fprintf(mp, "From: %s\n", info->mailfrom);
- else
- fprintf(mp, "From: %s monitoring <root>\n",
- Name);
- fprintf(mp, "To: %s\n", info->mailaddr);
- fprintf(mp, "Subject: %s event on %s:%s\n\n",
- event, dev, hname);
-
- fprintf(mp,
- "This is an automatically generated mail message from %s\n", Name);
- fprintf(mp, "running on %s\n\n", hname);
-
- fprintf(mp,
- "A %s event had been detected on md device %s.\n\n", event, dev);
-
- if (disc && disc[0] != ' ')
- fprintf(mp,
- "It could be related to component device %s.\n\n", disc);
- if (disc && disc[0] == ' ')
- fprintf(mp, "Extra information:%s.\n\n", disc);
-
- fprintf(mp, "Faithfully yours, etc.\n");
-
- mdstat = fopen("/proc/mdstat", "r");
- if (mdstat) {
- char buf[8192];
- int n;
- fprintf(mp,
- "\nP.S. The /proc/mdstat file currently contains the following:\n\n");
- while ((n = fread(buf, 1, sizeof(buf),
- mdstat)) > 0)
- n = fwrite(buf, 1, n, mp);
- fclose(mdstat);
- }
- pclose(mp);
- }
+ send_event_email(event, dev, disc, info);
}
- /* log the event to syslog maybe */
- if (info->dosyslog) {
- /* Log at a different severity depending on the event.
- *
- * These are the critical events: */
- if (strncmp(event, "Fail", 4) == 0 ||
- strncmp(event, "Degrade", 7) == 0 ||
- strncmp(event, "DeviceDisappeared", 17) == 0)
- priority = LOG_CRIT;
- /* Good to know about, but are not failures: */
- else if (strncmp(event, "Rebuild", 7) == 0 ||
- strncmp(event, "MoveSpare", 9) == 0 ||
- strncmp(event, "Spares", 6) != 0)
- priority = LOG_WARNING;
- /* Everything else: */
- else
- priority = LOG_INFO;
-
- if (disc && disc[0] != ' ')
- syslog(priority,
- "%s event detected on md device %s, component device %s", event, dev, disc);
- else if (disc)
- syslog(priority,
- "%s event detected on md device %s: %s",
- event, dev, disc);
- else
- syslog(priority,
- "%s event detected on md device %s",
- event, dev);
- }
+ if (info->dosyslog)
+ log_event_to_syslog(event, dev, disc);
}
static int check_array(struct state *st, struct mdstat_ent *mdstat,
--
2.38.1

View File

@ -0,0 +1,41 @@
From f40ac0e7e6043361ad12e9db97c07e56c3977cf6 Mon Sep 17 00:00:00 2001
From: Blazej Kucman <blazej.kucman@intel.com>
Date: Mon, 19 Dec 2022 11:21:57 +0100
Subject: [PATCH 63/83] Monitor: block if monitor modes are combined.
Block monitoring start if --scan mode and MD devices list are combined.
Signed-off-by: Blazej Kucman <blazej.kucman@intel.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
Monitor.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/Monitor.c b/Monitor.c
index 0036e8cd..188cb8be 100644
--- a/Monitor.c
+++ b/Monitor.c
@@ -123,7 +123,7 @@ int Monitor(struct mddev_dev *devlist,
* and if we can get_disk_info and find a name
* Then we hot-remove and hot-add to the other array
*
- * If devlist is NULL, then we can monitor everything because --scan
+ * If devlist is NULL, then we can monitor everything if --scan
* was given. We get an initial list from config file and add anything
* that appears in /proc/mdstat
*/
@@ -136,6 +136,11 @@ int Monitor(struct mddev_dev *devlist,
struct mddev_ident *mdlist;
int delay_for_event = c->delay;
+ if (devlist && c->scan) {
+ pr_err("Devices list and --scan option cannot be combined - not monitoring.\n");
+ return 1;
+ }
+
if (!mailaddr)
mailaddr = conf_get_mailaddr();
--
2.38.1

View File

@ -0,0 +1,119 @@
From 725e37cd14866906ba28c970394b9f7a4cd97413 Mon Sep 17 00:00:00 2001
From: Blazej Kucman <blazej.kucman@intel.com>
Date: Mon, 19 Dec 2022 11:21:58 +0100
Subject: [PATCH 64/83] Update mdadm Monitor manual.
- describe monitor work modes,
- clarify the turning off condition,
- describe the mdmonitor.service as a prefered management way.
Signed-off-by: Blazej Kucman <blazej.kucman@intel.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
mdadm.8.in | 71 ++++++++++++++++++++++++++++++++++++++----------------
1 file changed, 50 insertions(+), 21 deletions(-)
diff --git a/mdadm.8.in b/mdadm.8.in
index 70c79d1e..64f71ed1 100644
--- a/mdadm.8.in
+++ b/mdadm.8.in
@@ -2548,13 +2548,33 @@ Usage:
.I options... devices...
.PP
-This usage causes
+Monitor option can work in two modes:
+.IP \(bu 4
+system wide mode, follow all md devices based on
+.B /proc/mdstat,
+.IP \(bu 4
+follow only specified MD devices in command line.
+.PP
+
+.B \-\-scan -
+indicates system wide mode. Option causes the
+.I monitor
+to track all md devices that appear in
+.B /proc/mdstat.
+If it is not set, then at least one
+.B device
+must be specified.
+
+Monitor usage causes
.I mdadm
to periodically poll a number of md arrays and to report on any events
noticed.
-.I mdadm
-will never exit once it decides that there are arrays to be checked,
-so it should normally be run in the background.
+
+In both modes,
+.I monitor
+will work as long as there is an active array with redundancy and it is defined to follow (for
+.B \-\-scan
+every array is followed).
As well as reporting events,
.I mdadm
@@ -2565,15 +2585,6 @@ or
.B domain
and if the destination array has a failed drive but no spares.
-If any devices are listed on the command line,
-.I mdadm
-will only monitor those devices, otherwise, all arrays listed in the
-configuration file will be monitored. Further, if
-.B \-\-scan
-is given, then any other md devices that appear in
-.B /proc/mdstat
-will also be monitored.
-
The result of monitoring the arrays is the generation of events.
These events are passed to a separate program (if specified) and may
be mailed to a given E-mail address.
@@ -2586,16 +2597,34 @@ device if relevant (such as a component device that has failed).
If
.B \-\-scan
-is given, then a program or an E-mail address must be specified on the
-command line or in the config file. If neither are available, then
+is given, then a
+.B program
+or an
+.B e-mail
+address must be specified on the
+command line or in the config file. If neither are available, then
.I mdadm
will not monitor anything.
-Without
-.B \-\-scan,
-.I mdadm
-will continue monitoring as long as something was found to monitor. If
-no program or email is given, then each event is reported to
-.BR stdout .
+For devices given directly in command line, without
+.B program
+or
+.B email
+specified, each event is reported to
+.BR stdout.
+
+Note: For systems where
+.If mdadm monitor
+is configured via systemd,
+.B mdmonitor(mdmonitor.service)
+should be configured. The service is designed to be primary solution for array monitoring,
+it is configured to work in system wide mode.
+It is automatically started and stopped according to current state and types of MD arrays in system.
+The service may require additional configuration, like
+.B e-mail
+or
+.B delay.
+That should be done in
+.B mdadm.conf.
The different events are:
--
2.38.1

View File

@ -0,0 +1,38 @@
From 434b3b9bb96a76dc12f693b64cf23b581781e20b Mon Sep 17 00:00:00 2001
From: Blazej Kucman <blazej.kucman@intel.com>
Date: Tue, 20 Dec 2022 12:07:51 +0100
Subject: [PATCH 65/83] Grow: fix possible memory leak.
Signed-off-by: Blazej Kucman <blazej.kucman@intel.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
Grow.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/Grow.c b/Grow.c
index e362403a..b73ec2ae 100644
--- a/Grow.c
+++ b/Grow.c
@@ -432,6 +432,7 @@ int Grow_addbitmap(char *devname, int fd, struct context *c, struct shape *s)
if (((disk.state & (1 << MD_DISK_WRITEMOSTLY)) == 0) &&
(strcmp(s->bitmap_file, "clustered") == 0)) {
pr_err("%s disks marked write-mostly are not supported with clustered bitmap\n",devname);
+ free(mdi);
return 1;
}
fd2 = dev_open(dv, O_RDWR);
@@ -453,8 +454,10 @@ int Grow_addbitmap(char *devname, int fd, struct context *c, struct shape *s)
pr_err("failed to load super-block.\n");
}
close(fd2);
- if (rv)
+ if (rv) {
+ free(mdi);
return 1;
+ }
}
if (offset_setable) {
st->ss->getinfo_super(st, mdi, NULL);
--
2.38.1

View File

@ -0,0 +1,148 @@
From 7fcbfd7c620e2dcd3b539d18e93cb503ee3a8a62 Mon Sep 17 00:00:00 2001
From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Date: Wed, 21 Dec 2022 12:50:17 +0100
Subject: [PATCH 66/83] mdadm: create ident_init()
Add a wrapper for repeated initializations in mdadm.c and config.c.
Move includes up.
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
config.c | 45 +++++++++++++++++++++++++++++----------------
mdadm.c | 16 ++--------------
mdadm.h | 7 +++++--
3 files changed, 36 insertions(+), 32 deletions(-)
diff --git a/config.c b/config.c
index dc1620c1..eeedd0c6 100644
--- a/config.c
+++ b/config.c
@@ -119,6 +119,34 @@ int match_keyword(char *word)
return -1;
}
+/**
+ * ident_init() - Set defaults.
+ * @ident: ident pointer, not NULL.
+ */
+inline void ident_init(struct mddev_ident *ident)
+{
+ assert(ident);
+
+ ident->assembled = false;
+ ident->autof = 0;
+ ident->bitmap_fd = -1;
+ ident->bitmap_file = NULL;
+ ident->container = NULL;
+ ident->devices = NULL;
+ ident->devname = NULL;
+ ident->level = UnSet;
+ ident->member = NULL;
+ ident->name[0] = 0;
+ ident->next = NULL;
+ ident->raid_disks = UnSet;
+ ident->spare_group = NULL;
+ ident->spare_disks = 0;
+ ident->st = NULL;
+ ident->super_minor = UnSet;
+ ident->uuid[0] = 0;
+ ident->uuid_set = 0;
+}
+
struct conf_dev {
struct conf_dev *next;
char *name;
@@ -363,22 +391,7 @@ void arrayline(char *line)
struct mddev_ident mis;
struct mddev_ident *mi;
- mis.uuid_set = 0;
- mis.super_minor = UnSet;
- mis.level = UnSet;
- mis.raid_disks = UnSet;
- mis.spare_disks = 0;
- mis.devices = NULL;
- mis.devname = NULL;
- mis.spare_group = NULL;
- mis.autof = 0;
- mis.next = NULL;
- mis.st = NULL;
- mis.bitmap_fd = -1;
- mis.bitmap_file = NULL;
- mis.name[0] = 0;
- mis.container = NULL;
- mis.member = NULL;
+ ident_init(&mis);
for (w = dl_next(line); w != line; w = dl_next(w)) {
if (w[0] == '/' || strchr(w, '=') == NULL) {
diff --git a/mdadm.c b/mdadm.c
index 972adb52..74fdec31 100644
--- a/mdadm.c
+++ b/mdadm.c
@@ -107,25 +107,13 @@ int main(int argc, char *argv[])
srandom(time(0) ^ getpid());
- ident.uuid_set = 0;
- ident.level = UnSet;
- ident.raid_disks = UnSet;
- ident.super_minor = UnSet;
- ident.devices = 0;
- ident.spare_group = NULL;
- ident.autof = 0;
- ident.st = NULL;
- ident.bitmap_fd = -1;
- ident.bitmap_file = NULL;
- ident.name[0] = 0;
- ident.container = NULL;
- ident.member = NULL;
-
if (get_linux_version() < 2006015) {
pr_err("This version of mdadm does not support kernels older than 2.6.15\n");
exit(1);
}
+ ident_init(&ident);
+
while ((option_index = -1),
(opt = getopt_long(argc, argv, shortopt, long_options,
&option_index)) != -1) {
diff --git a/mdadm.h b/mdadm.h
index 3673494e..23ffe977 100644
--- a/mdadm.h
+++ b/mdadm.h
@@ -33,8 +33,10 @@ extern __off64_t lseek64 __P ((int __fd, __off64_t __offset, int __whence));
# endif
#endif
+#include <assert.h>
#include <sys/types.h>
#include <sys/stat.h>
+#include <stdarg.h>
#include <stdint.h>
#include <stdlib.h>
#include <time.h>
@@ -1552,6 +1554,8 @@ extern void enable_fds(int devices);
extern void manage_fork_fds(int close_all);
extern int continue_via_systemd(char *devnm, char *service_name);
+extern void ident_init(struct mddev_ident *ident);
+
extern int parse_auto(char *str, char *msg, int config);
extern struct mddev_ident *conf_get_ident(char *dev);
extern struct mddev_dev *conf_get_devs(void);
@@ -1779,8 +1783,7 @@ static inline sighandler_t signal_s(int sig, sighandler_t handler)
#define dprintf_cont(fmt, arg...) \
({ if (0) fprintf(stderr, fmt, ##arg); 0; })
#endif
-#include <assert.h>
-#include <stdarg.h>
+
static inline int xasprintf(char **strp, const char *fmt, ...) {
va_list ap;
int ret;
--
2.38.1

View File

@ -0,0 +1,287 @@
From 2568ce89ea5c26225e8984733adc2ea7559d853a Mon Sep 17 00:00:00 2001
From: Mateusz Kusiak <mateusz.kusiak@intel.com>
Date: Mon, 2 Jan 2023 09:35:15 +0100
Subject: [PATCH 67/83] mdadm: Add option validation for --update-subarray
Subset of options available for "--update" is not same as for "--update-subarray".
Define maps and enum for update options and use them instead of direct comparisons.
Add proper error message.
Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
ReadMe.c | 31 +++++++++++++++++
maps.c | 31 +++++++++++++++++
mdadm.c | 104 +++++++++++++++++--------------------------------------
mdadm.h | 32 ++++++++++++++++-
4 files changed, 124 insertions(+), 74 deletions(-)
diff --git a/ReadMe.c b/ReadMe.c
index 50a5e36d..bd8d50d2 100644
--- a/ReadMe.c
+++ b/ReadMe.c
@@ -655,3 +655,34 @@ char *mode_help[mode_count] = {
[GROW] = Help_grow,
[INCREMENTAL] = Help_incr,
};
+
+/**
+ * fprint_update_options() - Print valid update options depending on the mode.
+ * @outf: File (output stream)
+ * @update_mode: Used to distinguish update and update_subarray
+ */
+void fprint_update_options(FILE *outf, enum update_opt update_mode)
+{
+ int counter = UOPT_NAME, breakpoint = UOPT_HELP;
+ mapping_t *map = update_options;
+
+ if (!outf)
+ return;
+ if (update_mode == UOPT_SUBARRAY_ONLY) {
+ breakpoint = UOPT_SUBARRAY_ONLY;
+ fprintf(outf, "Valid --update options for update-subarray are:\n\t");
+ } else
+ fprintf(outf, "Valid --update options are:\n\t");
+ while (map->num) {
+ if (map->num >= breakpoint)
+ break;
+ fprintf(outf, "'%s', ", map->name);
+ if (counter % 5 == 0)
+ fprintf(outf, "\n\t");
+ counter++;
+ map++;
+ }
+ if ((counter - 1) % 5)
+ fprintf(outf, "\n");
+ fprintf(outf, "\r");
+}
diff --git a/maps.c b/maps.c
index 20fcf719..b586679a 100644
--- a/maps.c
+++ b/maps.c
@@ -165,6 +165,37 @@ mapping_t sysfs_array_states[] = {
{ "broken", ARRAY_BROKEN },
{ NULL, ARRAY_UNKNOWN_STATE }
};
+/**
+ * mapping_t update_options - stores supported update options.
+ */
+mapping_t update_options[] = {
+ { "name", UOPT_NAME },
+ { "ppl", UOPT_PPL },
+ { "no-ppl", UOPT_NO_PPL },
+ { "bitmap", UOPT_BITMAP },
+ { "no-bitmap", UOPT_NO_BITMAP },
+ { "sparc2.2", UOPT_SPARC22 },
+ { "super-minor", UOPT_SUPER_MINOR },
+ { "summaries", UOPT_SUMMARIES },
+ { "resync", UOPT_RESYNC },
+ { "uuid", UOPT_UUID },
+ { "homehost", UOPT_HOMEHOST },
+ { "home-cluster", UOPT_HOME_CLUSTER },
+ { "nodes", UOPT_NODES },
+ { "devicesize", UOPT_DEVICESIZE },
+ { "bbl", UOPT_BBL },
+ { "no-bbl", UOPT_NO_BBL },
+ { "force-no-bbl", UOPT_FORCE_NO_BBL },
+ { "metadata", UOPT_METADATA },
+ { "revert-reshape", UOPT_REVERT_RESHAPE },
+ { "layout-original", UOPT_LAYOUT_ORIGINAL },
+ { "layout-alternate", UOPT_LAYOUT_ALTERNATE },
+ { "layout-unspecified", UOPT_LAYOUT_UNSPECIFIED },
+ { "byteorder", UOPT_BYTEORDER },
+ { "help", UOPT_HELP },
+ { "?", UOPT_HELP },
+ { NULL, UOPT_UNDEFINED}
+};
/**
* map_num_s() - Safer alternative of map_num() function.
diff --git a/mdadm.c b/mdadm.c
index 74fdec31..f5f505fe 100644
--- a/mdadm.c
+++ b/mdadm.c
@@ -100,7 +100,7 @@ int main(int argc, char *argv[])
char *dump_directory = NULL;
int print_help = 0;
- FILE *outf;
+ FILE *outf = NULL;
int mdfd = -1;
int locked = 0;
@@ -723,7 +723,11 @@ int main(int argc, char *argv[])
continue;
case O(ASSEMBLE,'U'): /* update the superblock */
- case O(MISC,'U'):
+ case O(MISC,'U'): {
+ enum update_opt updateopt = map_name(update_options, c.update);
+ enum update_opt print_mode = UOPT_HELP;
+ const char *error_addon = "update option";
+
if (c.update) {
pr_err("Can only update one aspect of superblock, both %s and %s given.\n",
c.update, optarg);
@@ -733,83 +737,37 @@ int main(int argc, char *argv[])
pr_err("Only subarrays can be updated in misc mode\n");
exit(2);
}
+
c.update = optarg;
- if (strcmp(c.update, "sparc2.2") == 0)
- continue;
- if (strcmp(c.update, "super-minor") == 0)
- continue;
- if (strcmp(c.update, "summaries") == 0)
- continue;
- if (strcmp(c.update, "resync") == 0)
- continue;
- if (strcmp(c.update, "uuid") == 0)
- continue;
- if (strcmp(c.update, "name") == 0)
- continue;
- if (strcmp(c.update, "homehost") == 0)
- continue;
- if (strcmp(c.update, "home-cluster") == 0)
- continue;
- if (strcmp(c.update, "nodes") == 0)
- continue;
- if (strcmp(c.update, "devicesize") == 0)
- continue;
- if (strcmp(c.update, "bitmap") == 0)
- continue;
- if (strcmp(c.update, "no-bitmap") == 0)
- continue;
- if (strcmp(c.update, "bbl") == 0)
- continue;
- if (strcmp(c.update, "no-bbl") == 0)
- continue;
- if (strcmp(c.update, "force-no-bbl") == 0)
- continue;
- if (strcmp(c.update, "ppl") == 0)
- continue;
- if (strcmp(c.update, "no-ppl") == 0)
- continue;
- if (strcmp(c.update, "metadata") == 0)
- continue;
- if (strcmp(c.update, "revert-reshape") == 0)
- continue;
- if (strcmp(c.update, "layout-original") == 0 ||
- strcmp(c.update, "layout-alternate") == 0 ||
- strcmp(c.update, "layout-unspecified") == 0)
- continue;
- if (strcmp(c.update, "byteorder") == 0) {
+
+ if (devmode == UpdateSubarray) {
+ print_mode = UOPT_SUBARRAY_ONLY;
+ error_addon = "update-subarray option";
+
+ if (updateopt > UOPT_SUBARRAY_ONLY && updateopt < UOPT_HELP)
+ updateopt = UOPT_UNDEFINED;
+ }
+
+ switch (updateopt) {
+ case UOPT_UNDEFINED:
+ pr_err("'--update=%s' is invalid %s. ",
+ c.update, error_addon);
+ outf = stderr;
+ case UOPT_HELP:
+ if (!outf)
+ outf = stdout;
+ fprint_update_options(outf, print_mode);
+ exit(outf == stdout ? 0 : 2);
+ case UOPT_BYTEORDER:
if (ss) {
pr_err("must not set metadata type with --update=byteorder.\n");
exit(2);
}
- for(i = 0; !ss && superlist[i]; i++)
- ss = superlist[i]->match_metadata_desc(
- "0.swap");
- if (!ss) {
- pr_err("INTERNAL ERROR cannot find 0.swap\n");
- exit(2);
- }
-
- continue;
+ default:
+ break;
}
- if (strcmp(c.update,"?") == 0 ||
- strcmp(c.update, "help") == 0) {
- outf = stdout;
- fprintf(outf, "%s: ", Name);
- } else {
- outf = stderr;
- fprintf(outf,
- "%s: '--update=%s' is invalid. ",
- Name, c.update);
- }
- fprintf(outf, "Valid --update options are:\n"
- " 'sparc2.2', 'super-minor', 'uuid', 'name', 'nodes', 'resync',\n"
- " 'summaries', 'homehost', 'home-cluster', 'byteorder', 'devicesize',\n"
- " 'bitmap', 'no-bitmap', 'metadata', 'revert-reshape'\n"
- " 'bbl', 'no-bbl', 'force-no-bbl', 'ppl', 'no-ppl'\n"
- " 'layout-original', 'layout-alternate', 'layout-unspecified'\n"
- );
- exit(outf == stdout ? 0 : 2);
-
+ continue;
+ }
case O(MANAGE,'U'):
/* update=devicesize is allowed with --re-add */
if (devmode != 'A') {
diff --git a/mdadm.h b/mdadm.h
index 23ffe977..51f1db2d 100644
--- a/mdadm.h
+++ b/mdadm.h
@@ -497,6 +497,36 @@ enum special_options {
ConsistencyPolicy,
};
+enum update_opt {
+ UOPT_NAME = 1,
+ UOPT_PPL,
+ UOPT_NO_PPL,
+ UOPT_BITMAP,
+ UOPT_NO_BITMAP,
+ UOPT_SUBARRAY_ONLY,
+ UOPT_SPARC22,
+ UOPT_SUPER_MINOR,
+ UOPT_SUMMARIES,
+ UOPT_RESYNC,
+ UOPT_UUID,
+ UOPT_HOMEHOST,
+ UOPT_HOME_CLUSTER,
+ UOPT_NODES,
+ UOPT_DEVICESIZE,
+ UOPT_BBL,
+ UOPT_NO_BBL,
+ UOPT_FORCE_NO_BBL,
+ UOPT_METADATA,
+ UOPT_REVERT_RESHAPE,
+ UOPT_LAYOUT_ORIGINAL,
+ UOPT_LAYOUT_ALTERNATE,
+ UOPT_LAYOUT_UNSPECIFIED,
+ UOPT_BYTEORDER,
+ UOPT_HELP,
+ UOPT_UNDEFINED
+};
+extern void fprint_update_options(FILE *outf, enum update_opt update_mode);
+
enum prefix_standard {
JEDEC,
IEC
@@ -777,7 +807,7 @@ extern char *map_num(mapping_t *map, int num);
extern int map_name(mapping_t *map, char *name);
extern mapping_t r0layout[], r5layout[], r6layout[],
pers[], modes[], faultylayout[];
-extern mapping_t consistency_policies[], sysfs_array_states[];
+extern mapping_t consistency_policies[], sysfs_array_states[], update_options[];
extern char *map_dev_preferred(int major, int minor, int create,
char *prefer);
--
2.38.1

View File

@ -0,0 +1,54 @@
From db10eab68e652f141169b7240e057d110d626c3d Mon Sep 17 00:00:00 2001
From: Mateusz Kusiak <mateusz.kusiak@intel.com>
Date: Mon, 2 Jan 2023 09:35:16 +0100
Subject: [PATCH 68/83] Fix --update-subarray on active volume
Options: bitmap, ppl and name should not be updated when array is active.
Those features are mutually exclusive and share the same data area in IMSM (danger of overwriting by kernel).
Remove check for active subarrays from super-intel.
Since ddf is not supported, apply it globally for all options.
Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
Manage.c | 7 +++++++
super-intel.c | 5 -----
2 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/Manage.c b/Manage.c
index b1d0e630..5a9ea316 100644
--- a/Manage.c
+++ b/Manage.c
@@ -1745,6 +1745,13 @@ int Update_subarray(char *dev, char *subarray, char *update, struct mddev_ident
goto free_super;
}
+ if (is_subarray_active(subarray, st->devnm)) {
+ if (verbose >= 0)
+ pr_err("Subarray %s in %s is active, cannot update %s\n",
+ subarray, dev, update);
+ goto free_super;
+ }
+
if (mdmon_running(st->devnm))
st->update_tail = &st->updates;
diff --git a/super-intel.c b/super-intel.c
index b0565610..5f93f3d3 100644
--- a/super-intel.c
+++ b/super-intel.c
@@ -7914,11 +7914,6 @@ static int update_subarray_imsm(struct supertype *st, char *subarray,
char *ep;
int vol;
- if (is_subarray_active(subarray, st->devnm)) {
- pr_err("Unable to update name of active subarray\n");
- return 2;
- }
-
if (!check_name(super, name, 0))
return 2;
--
2.38.1

View File

@ -0,0 +1,77 @@
From 2257de106cbf17a7f1df33a10cfd2be0d5a064cb Mon Sep 17 00:00:00 2001
From: Mateusz Kusiak <mateusz.kusiak@intel.com>
Date: Mon, 2 Jan 2023 09:35:17 +0100
Subject: [PATCH 69/83] Add code specific update options to enum.
Some of update options aren't taken from user input, but are hard-coded
as strings.
Include those options in enum.
Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
maps.c | 21 +++++++++++++++++++++
mdadm.h | 15 +++++++++++++++
2 files changed, 36 insertions(+)
diff --git a/maps.c b/maps.c
index b586679a..c59036f1 100644
--- a/maps.c
+++ b/maps.c
@@ -194,6 +194,27 @@ mapping_t update_options[] = {
{ "byteorder", UOPT_BYTEORDER },
{ "help", UOPT_HELP },
{ "?", UOPT_HELP },
+ /*
+ * Those enries are temporary and will be removed in this patchset.
+ *
+ * Before update_super:update can be changed to enum,
+ * all update_super sub-functions must be adapted first.
+ * Update options will be passed as string (as it is for now),
+ * and then mapped, so all options must be handled temporarily.
+ *
+ * Those options code specific and should not be accessible for user.
+ */
+ { "force-one", UOPT_SPEC_FORCE_ONE },
+ { "force-array", UOPT_SPEC_FORCE_ARRAY },
+ { "assemble", UOPT_SPEC_ASSEMBLE },
+ { "linear-grow-new", UOPT_SPEC_LINEAR_GROW_NEW },
+ { "linear-grow-update", UOPT_SPEC_LINEAR_GROW_UPDATE },
+ { "_reshape_progress", UOPT_SPEC__RESHAPE_PROGRESS },
+ { "writemostly", UOPT_SPEC_WRITEMOSTLY },
+ { "readwrite", UOPT_SPEC_READWRITE },
+ { "failfast", UOPT_SPEC_FAILFAST },
+ { "nofailfast", UOPT_SPEC_NOFAILFAST },
+ { "revert-reshape-nobackup", UOPT_SPEC_REVERT_RESHAPE_NOBACKUP },
{ NULL, UOPT_UNDEFINED}
};
diff --git a/mdadm.h b/mdadm.h
index 51f1db2d..31db25f5 100644
--- a/mdadm.h
+++ b/mdadm.h
@@ -523,6 +523,21 @@ enum update_opt {
UOPT_LAYOUT_UNSPECIFIED,
UOPT_BYTEORDER,
UOPT_HELP,
+ UOPT_USER_ONLY,
+ /*
+ * Code specific options, cannot be set by the user
+ */
+ UOPT_SPEC_FORCE_ONE,
+ UOPT_SPEC_FORCE_ARRAY,
+ UOPT_SPEC_ASSEMBLE,
+ UOPT_SPEC_LINEAR_GROW_NEW,
+ UOPT_SPEC_LINEAR_GROW_UPDATE,
+ UOPT_SPEC__RESHAPE_PROGRESS,
+ UOPT_SPEC_WRITEMOSTLY,
+ UOPT_SPEC_READWRITE,
+ UOPT_SPEC_FAILFAST,
+ UOPT_SPEC_NOFAILFAST,
+ UOPT_SPEC_REVERT_RESHAPE_NOBACKUP,
UOPT_UNDEFINED
};
extern void fprint_update_options(FILE *outf, enum update_opt update_mode);
--
2.38.1

View File

@ -0,0 +1,106 @@
From 35aa44c549290e22f285896684c704acb53b7717 Mon Sep 17 00:00:00 2001
From: Mateusz Kusiak <mateusz.kusiak@intel.com>
Date: Mon, 2 Jan 2023 09:35:18 +0100
Subject: [PATCH 70/83] super-ddf: Remove update_super_ddf.
This is not supported by ddf.
It hides errors by returning success status for some updates.
Remove update_super_dff().
Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
super-ddf.c | 70 -----------------------------------------------------
1 file changed, 70 deletions(-)
diff --git a/super-ddf.c b/super-ddf.c
index 9d1e3b94..309812df 100644
--- a/super-ddf.c
+++ b/super-ddf.c
@@ -2139,75 +2139,6 @@ static void getinfo_super_ddf_bvd(struct supertype *st, struct mdinfo *info, cha
}
}
-static int update_super_ddf(struct supertype *st, struct mdinfo *info,
- char *update,
- char *devname, int verbose,
- int uuid_set, char *homehost)
-{
- /* For 'assemble' and 'force' we need to return non-zero if any
- * change was made. For others, the return value is ignored.
- * Update options are:
- * force-one : This device looks a bit old but needs to be included,
- * update age info appropriately.
- * assemble: clear any 'faulty' flag to allow this device to
- * be assembled.
- * force-array: Array is degraded but being forced, mark it clean
- * if that will be needed to assemble it.
- *
- * newdev: not used ????
- * grow: Array has gained a new device - this is currently for
- * linear only
- * resync: mark as dirty so a resync will happen.
- * uuid: Change the uuid of the array to match what is given
- * homehost: update the recorded homehost
- * name: update the name - preserving the homehost
- * _reshape_progress: record new reshape_progress position.
- *
- * Following are not relevant for this version:
- * sparc2.2 : update from old dodgey metadata
- * super-minor: change the preferred_minor number
- * summaries: update redundant counters.
- */
- int rv = 0;
-// struct ddf_super *ddf = st->sb;
-// struct vd_config *vd = find_vdcr(ddf, info->container_member);
-// struct virtual_entry *ve = find_ve(ddf);
-
- /* we don't need to handle "force-*" or "assemble" as
- * there is no need to 'trick' the kernel. When the metadata is
- * first updated to activate the array, all the implied modifications
- * will just happen.
- */
-
- if (strcmp(update, "grow") == 0) {
- /* FIXME */
- } else if (strcmp(update, "resync") == 0) {
-// info->resync_checkpoint = 0;
- } else if (strcmp(update, "homehost") == 0) {
- /* homehost is stored in controller->vendor_data,
- * or it is when we are the vendor
- */
-// if (info->vendor_is_local)
-// strcpy(ddf->controller.vendor_data, homehost);
- rv = -1;
- } else if (strcmp(update, "name") == 0) {
- /* name is stored in virtual_entry->name */
-// memset(ve->name, ' ', 16);
-// strncpy(ve->name, info->name, 16);
- rv = -1;
- } else if (strcmp(update, "_reshape_progress") == 0) {
- /* We don't support reshape yet */
- } else if (strcmp(update, "assemble") == 0 ) {
- /* Do nothing, just succeed */
- rv = 0;
- } else
- rv = -1;
-
-// update_all_csum(ddf);
-
- return rv;
-}
-
static void make_header_guid(char *guid)
{
be32 stamp;
@@ -5211,7 +5142,6 @@ struct superswitch super_ddf = {
.match_home = match_home_ddf,
.uuid_from_super= uuid_from_super_ddf,
.getinfo_super = getinfo_super_ddf,
- .update_super = update_super_ddf,
.avail_size = avail_size_ddf,
--
2.38.1

View File

@ -0,0 +1,212 @@
From 0a9e39383d3bf63e1f5cf10f64200083a1af8091 Mon Sep 17 00:00:00 2001
From: Mateusz Kusiak <mateusz.kusiak@intel.com>
Date: Mon, 2 Jan 2023 09:35:19 +0100
Subject: [PATCH 71/83] super0: refactor the code for enum
It prepares update_super0 for change context->update to enum.
Change if else statements to switch.
Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
super0.c | 102 ++++++++++++++++++++++++++++++++++---------------------
1 file changed, 63 insertions(+), 39 deletions(-)
diff --git a/super0.c b/super0.c
index 93876e2e..d9f5bff4 100644
--- a/super0.c
+++ b/super0.c
@@ -502,19 +502,39 @@ static int update_super0(struct supertype *st, struct mdinfo *info,
int rv = 0;
int uuid[4];
mdp_super_t *sb = st->sb;
+ enum update_opt update_enum = map_name(update_options, update);
- if (strcmp(update, "homehost") == 0 &&
- homehost) {
- /* note that 'homehost' is special as it is really
+ if (update_enum == UOPT_HOMEHOST && homehost) {
+ /*
+ * note that 'homehost' is special as it is really
* a "uuid" update.
*/
uuid_set = 0;
- update = "uuid";
+ update_enum = UOPT_UUID;
info->uuid[0] = sb->set_uuid0;
info->uuid[1] = sb->set_uuid1;
}
- if (strcmp(update, "sparc2.2")==0 ) {
+ switch (update_enum) {
+ case UOPT_UUID:
+ if (!uuid_set && homehost) {
+ char buf[20];
+ memcpy(info->uuid+2,
+ sha1_buffer(homehost, strlen(homehost), buf),
+ 8);
+ }
+ sb->set_uuid0 = info->uuid[0];
+ sb->set_uuid1 = info->uuid[1];
+ sb->set_uuid2 = info->uuid[2];
+ sb->set_uuid3 = info->uuid[3];
+ if (sb->state & (1<<MD_SB_BITMAP_PRESENT)) {
+ struct bitmap_super_s *bm;
+ bm = (struct bitmap_super_s *)(sb+1);
+ uuid_from_super0(st, uuid);
+ memcpy(bm->uuid, uuid, 16);
+ }
+ break;
+ case UOPT_SPARC22: {
/* 2.2 sparc put the events in the wrong place
* So we copy the tail of the superblock
* up 4 bytes before continuing
@@ -527,12 +547,15 @@ static int update_super0(struct supertype *st, struct mdinfo *info,
if (verbose >= 0)
pr_err("adjusting superblock of %s for 2.2/sparc compatibility.\n",
devname);
- } else if (strcmp(update, "super-minor") ==0) {
+ break;
+ }
+ case UOPT_SUPER_MINOR:
sb->md_minor = info->array.md_minor;
if (verbose > 0)
pr_err("updating superblock of %s with minor number %d\n",
devname, info->array.md_minor);
- } else if (strcmp(update, "summaries") == 0) {
+ break;
+ case UOPT_SUMMARIES: {
unsigned int i;
/* set nr_disks, active_disks, working_disks,
* failed_disks, spare_disks based on disks[]
@@ -559,7 +582,9 @@ static int update_super0(struct supertype *st, struct mdinfo *info,
sb->spare_disks++;
} else if (i >= sb->raid_disks && sb->disks[i].number == 0)
sb->disks[i].state = 0;
- } else if (strcmp(update, "force-one")==0) {
+ break;
+ }
+ case UOPT_SPEC_FORCE_ONE: {
/* Not enough devices for a working array, so
* bring this one up-to-date.
*/
@@ -569,7 +594,9 @@ static int update_super0(struct supertype *st, struct mdinfo *info,
if (sb->events_hi != ehi ||
sb->events_lo != elo)
rv = 1;
- } else if (strcmp(update, "force-array")==0) {
+ break;
+ }
+ case UOPT_SPEC_FORCE_ARRAY:
/* degraded array and 'force' requested, so
* maybe need to mark it 'clean'
*/
@@ -579,7 +606,8 @@ static int update_super0(struct supertype *st, struct mdinfo *info,
sb->state |= (1 << MD_SB_CLEAN);
rv = 1;
}
- } else if (strcmp(update, "assemble")==0) {
+ break;
+ case UOPT_SPEC_ASSEMBLE: {
int d = info->disk.number;
int wonly = sb->disks[d].state & (1<<MD_DISK_WRITEMOSTLY);
int failfast = sb->disks[d].state & (1<<MD_DISK_FAILFAST);
@@ -609,7 +637,9 @@ static int update_super0(struct supertype *st, struct mdinfo *info,
sb->reshape_position = info->reshape_progress;
rv = 1;
}
- } else if (strcmp(update, "linear-grow-new") == 0) {
+ break;
+ }
+ case UOPT_SPEC_LINEAR_GROW_NEW:
memset(&sb->disks[info->disk.number], 0, sizeof(sb->disks[0]));
sb->disks[info->disk.number].number = info->disk.number;
sb->disks[info->disk.number].major = info->disk.major;
@@ -617,7 +647,8 @@ static int update_super0(struct supertype *st, struct mdinfo *info,
sb->disks[info->disk.number].raid_disk = info->disk.raid_disk;
sb->disks[info->disk.number].state = info->disk.state;
sb->this_disk = sb->disks[info->disk.number];
- } else if (strcmp(update, "linear-grow-update") == 0) {
+ break;
+ case UOPT_SPEC_LINEAR_GROW_UPDATE:
sb->raid_disks = info->array.raid_disks;
sb->nr_disks = info->array.nr_disks;
sb->active_disks = info->array.active_disks;
@@ -628,29 +659,15 @@ static int update_super0(struct supertype *st, struct mdinfo *info,
sb->disks[info->disk.number].minor = info->disk.minor;
sb->disks[info->disk.number].raid_disk = info->disk.raid_disk;
sb->disks[info->disk.number].state = info->disk.state;
- } else if (strcmp(update, "resync") == 0) {
- /* make sure resync happens */
+ break;
+ case UOPT_RESYNC:
+ /*
+ * make sure resync happens
+ */
sb->state &= ~(1<<MD_SB_CLEAN);
sb->recovery_cp = 0;
- } else if (strcmp(update, "uuid") == 0) {
- if (!uuid_set && homehost) {
- char buf[20];
- char *hash = sha1_buffer(homehost,
- strlen(homehost),
- buf);
- memcpy(info->uuid+2, hash, 8);
- }
- sb->set_uuid0 = info->uuid[0];
- sb->set_uuid1 = info->uuid[1];
- sb->set_uuid2 = info->uuid[2];
- sb->set_uuid3 = info->uuid[3];
- if (sb->state & (1<<MD_SB_BITMAP_PRESENT)) {
- struct bitmap_super_s *bm;
- bm = (struct bitmap_super_s*)(sb+1);
- uuid_from_super0(st, uuid);
- memcpy(bm->uuid, uuid, 16);
- }
- } else if (strcmp(update, "metadata") == 0) {
+ break;
+ case UOPT_METADATA:
/* Create some v1.0 metadata to match ours but make the
* ctime bigger. Also update info->array.*_version.
* We need to arrange that store_super writes out
@@ -670,7 +687,8 @@ static int update_super0(struct supertype *st, struct mdinfo *info,
uuid_from_super0(st, info->uuid);
st->other = super1_make_v0(st, info, st->sb);
}
- } else if (strcmp(update, "revert-reshape") == 0) {
+ break;
+ case UOPT_REVERT_RESHAPE:
rv = -2;
if (sb->minor_version <= 90)
pr_err("No active reshape to revert on %s\n",
@@ -702,16 +720,22 @@ static int update_super0(struct supertype *st, struct mdinfo *info,
sb->new_chunk = sb->chunk_size;
sb->chunk_size = tmp;
}
- } else if (strcmp(update, "no-bitmap") == 0) {
+ break;
+ case UOPT_NO_BITMAP:
sb->state &= ~(1<<MD_SB_BITMAP_PRESENT);
- } else if (strcmp(update, "_reshape_progress")==0)
+ break;
+ case UOPT_SPEC__RESHAPE_PROGRESS:
sb->reshape_position = info->reshape_progress;
- else if (strcmp(update, "writemostly")==0)
+ break;
+ case UOPT_SPEC_WRITEMOSTLY:
sb->state |= (1<<MD_DISK_WRITEMOSTLY);
- else if (strcmp(update, "readwrite")==0)
+ break;
+ case UOPT_SPEC_READWRITE:
sb->state &= ~(1<<MD_DISK_WRITEMOSTLY);
- else
+ break;
+ default:
rv = -1;
+ }
sb->sb_csum = calc_sb0_csum(sb);
return rv;
--
2.38.1

View File

@ -0,0 +1,302 @@
From 7e8daba8b7937716dce8ea28298a4e2e72cb829e Mon Sep 17 00:00:00 2001
From: Mateusz Kusiak <mateusz.kusiak@intel.com>
Date: Mon, 2 Jan 2023 09:35:20 +0100
Subject: [PATCH 72/83] super1: refactor the code for enum
It prepares update_super1 for change context->update to enum.
Change if else statements into switch.
Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
super1.c | 152 +++++++++++++++++++++++++++++++++----------------------
1 file changed, 91 insertions(+), 61 deletions(-)
diff --git a/super1.c b/super1.c
index 0b505a7e..b0a97016 100644
--- a/super1.c
+++ b/super1.c
@@ -1218,30 +1218,55 @@ static int update_super1(struct supertype *st, struct mdinfo *info,
int rv = 0;
struct mdp_superblock_1 *sb = st->sb;
bitmap_super_t *bms = (bitmap_super_t*)(((char*)sb) + MAX_SB_SIZE);
+ enum update_opt update_enum = map_name(update_options, update);
- if (strcmp(update, "homehost") == 0 &&
- homehost) {
- /* Note that 'homehost' is special as it is really
+ if (update_enum == UOPT_HOMEHOST && homehost) {
+ /*
+ * Note that 'homehost' is special as it is really
* a "name" update.
*/
char *c;
- update = "name";
+ update_enum = UOPT_NAME;
c = strchr(sb->set_name, ':');
if (c)
- strncpy(info->name, c+1, 31 - (c-sb->set_name));
+ snprintf(info->name, sizeof(info->name), "%s", c+1);
else
- strncpy(info->name, sb->set_name, 32);
- info->name[32] = 0;
+ snprintf(info->name, sizeof(info->name), "%s", sb->set_name);
}
- if (strcmp(update, "force-one")==0) {
+ switch (update_enum) {
+ case UOPT_NAME: {
+ int namelen;
+
+ if (!info->name[0])
+ snprintf(info->name, sizeof(info->name), "%d", info->array.md_minor);
+ memset(sb->set_name, 0, sizeof(sb->set_name));
+
+ namelen = strnlen(homehost, MD_NAME_MAX) + 1 + strnlen(info->name, MD_NAME_MAX);
+ if (homehost &&
+ strchr(info->name, ':') == NULL &&
+ namelen < MD_NAME_MAX) {
+ strcpy(sb->set_name, homehost);
+ strcat(sb->set_name, ":");
+ strcat(sb->set_name, info->name);
+ } else {
+ namelen = min((int)strnlen(info->name, MD_NAME_MAX),
+ (int)sizeof(sb->set_name) - 1);
+ memcpy(sb->set_name, info->name, namelen);
+ memset(&sb->set_name[namelen], '\0',
+ sizeof(sb->set_name) - namelen);
+ }
+ break;
+ }
+ case UOPT_SPEC_FORCE_ONE:
/* Not enough devices for a working array,
* so bring this one up-to-date
*/
if (sb->events != __cpu_to_le64(info->events))
rv = 1;
sb->events = __cpu_to_le64(info->events);
- } else if (strcmp(update, "force-array")==0) {
+ break;
+ case UOPT_SPEC_FORCE_ARRAY:
/* Degraded array and 'force' requests to
* maybe need to mark it 'clean'.
*/
@@ -1254,7 +1279,8 @@ static int update_super1(struct supertype *st, struct mdinfo *info,
rv = 1;
sb->resync_offset = MaxSector;
}
- } else if (strcmp(update, "assemble")==0) {
+ break;
+ case UOPT_SPEC_ASSEMBLE: {
int d = info->disk.number;
int want;
if (info->disk.state & (1<<MD_DISK_ACTIVE))
@@ -1287,7 +1313,9 @@ static int update_super1(struct supertype *st, struct mdinfo *info,
__cpu_to_le64(info->reshape_progress);
rv = 1;
}
- } else if (strcmp(update, "linear-grow-new") == 0) {
+ break;
+ }
+ case UOPT_SPEC_LINEAR_GROW_NEW: {
int i;
int fd;
int max = __le32_to_cpu(sb->max_dev);
@@ -1330,7 +1358,9 @@ static int update_super1(struct supertype *st, struct mdinfo *info,
ds - __le64_to_cpu(sb->data_offset));
}
}
- } else if (strcmp(update, "linear-grow-update") == 0) {
+ break;
+ }
+ case UOPT_SPEC_LINEAR_GROW_UPDATE: {
int max = __le32_to_cpu(sb->max_dev);
int i = info->disk.number;
if (max > MAX_DEVS || i > MAX_DEVS)
@@ -1342,19 +1372,20 @@ static int update_super1(struct supertype *st, struct mdinfo *info,
sb->raid_disks = __cpu_to_le32(info->array.raid_disks);
sb->dev_roles[info->disk.number] =
__cpu_to_le16(info->disk.raid_disk);
- } else if (strcmp(update, "resync") == 0) {
- /* make sure resync happens */
- sb->resync_offset = 0ULL;
- } else if (strcmp(update, "uuid") == 0) {
+ break;
+ }
+ case UOPT_UUID:
copy_uuid(sb->set_uuid, info->uuid, super1.swapuuid);
if (__le32_to_cpu(sb->feature_map) & MD_FEATURE_BITMAP_OFFSET)
memcpy(bms->uuid, sb->set_uuid, 16);
- } else if (strcmp(update, "no-bitmap") == 0) {
+ break;
+ case UOPT_NO_BITMAP:
sb->feature_map &= ~__cpu_to_le32(MD_FEATURE_BITMAP_OFFSET);
if (bms->version == BITMAP_MAJOR_CLUSTERED && !IsBitmapDirty(devname))
sb->resync_offset = MaxSector;
- } else if (strcmp(update, "bbl") == 0) {
+ break;
+ case UOPT_BBL: {
/* only possible if there is room after the bitmap, or if
* there is no bitmap
*/
@@ -1383,14 +1414,12 @@ static int update_super1(struct supertype *st, struct mdinfo *info,
bb_offset = bitmap_offset + bm_sectors;
while (bb_offset < (long)sb_offset + 8 + 32*2 &&
bb_offset + 8+8 <= (long)data_offset)
- /* too close to bitmap, and room to grow */
bb_offset += 8;
if (bb_offset + 8 <= (long)data_offset) {
sb->bblog_size = __cpu_to_le16(8);
sb->bblog_offset = __cpu_to_le32(bb_offset);
}
} else {
- /* 1.0 - Put bbl just before super block */
if (bm_sectors && bitmap_offset < 0)
space = -bitmap_offset - bm_sectors;
else
@@ -1401,7 +1430,9 @@ static int update_super1(struct supertype *st, struct mdinfo *info,
sb->bblog_offset = __cpu_to_le32((unsigned)-8);
}
}
- } else if (strcmp(update, "no-bbl") == 0) {
+ break;
+ }
+ case UOPT_NO_BBL:
if (sb->feature_map & __cpu_to_le32(MD_FEATURE_BAD_BLOCKS))
pr_err("Cannot remove active bbl from %s\n",devname);
else {
@@ -1409,12 +1440,14 @@ static int update_super1(struct supertype *st, struct mdinfo *info,
sb->bblog_shift = 0;
sb->bblog_offset = 0;
}
- } else if (strcmp(update, "force-no-bbl") == 0) {
+ break;
+ case UOPT_FORCE_NO_BBL:
sb->feature_map &= ~ __cpu_to_le32(MD_FEATURE_BAD_BLOCKS);
sb->bblog_size = 0;
sb->bblog_shift = 0;
sb->bblog_offset = 0;
- } else if (strcmp(update, "ppl") == 0) {
+ break;
+ case UOPT_PPL: {
unsigned long long sb_offset = __le64_to_cpu(sb->super_offset);
unsigned long long data_offset = __le64_to_cpu(sb->data_offset);
unsigned long long data_size = __le64_to_cpu(sb->data_size);
@@ -1464,37 +1497,26 @@ static int update_super1(struct supertype *st, struct mdinfo *info,
sb->ppl.offset = __cpu_to_le16(offset);
sb->ppl.size = __cpu_to_le16(space);
sb->feature_map |= __cpu_to_le32(MD_FEATURE_PPL);
- } else if (strcmp(update, "no-ppl") == 0) {
+ break;
+ }
+ case UOPT_NO_PPL:
sb->feature_map &= ~__cpu_to_le32(MD_FEATURE_PPL |
MD_FEATURE_MUTLIPLE_PPLS);
- } else if (strcmp(update, "name") == 0) {
- if (info->name[0] == 0)
- sprintf(info->name, "%d", info->array.md_minor);
- memset(sb->set_name, 0, sizeof(sb->set_name));
- if (homehost &&
- strchr(info->name, ':') == NULL &&
- strlen(homehost)+1+strlen(info->name) < 32) {
- strcpy(sb->set_name, homehost);
- strcat(sb->set_name, ":");
- strcat(sb->set_name, info->name);
- } else {
- int namelen;
-
- namelen = min((int)strlen(info->name),
- (int)sizeof(sb->set_name) - 1);
- memcpy(sb->set_name, info->name, namelen);
- memset(&sb->set_name[namelen], '\0',
- sizeof(sb->set_name) - namelen);
- }
- } else if (strcmp(update, "devicesize") == 0 &&
- __le64_to_cpu(sb->super_offset) <
- __le64_to_cpu(sb->data_offset)) {
- /* set data_size to device size less data_offset */
+ break;
+ case UOPT_DEVICESIZE:
+ if (__le64_to_cpu(sb->super_offset) >=
+ __le64_to_cpu(sb->data_offset))
+ break;
+ /*
+ * set data_size to device size less data_offset
+ */
struct misc_dev_info *misc = (struct misc_dev_info*)
(st->sb + MAX_SB_SIZE + BM_SUPER_SIZE);
sb->data_size = __cpu_to_le64(
misc->device_size - __le64_to_cpu(sb->data_offset));
- } else if (strncmp(update, "revert-reshape", 14) == 0) {
+ break;
+ case UOPT_SPEC_REVERT_RESHAPE_NOBACKUP:
+ case UOPT_REVERT_RESHAPE:
rv = -2;
if (!(sb->feature_map &
__cpu_to_le32(MD_FEATURE_RESHAPE_ACTIVE)))
@@ -1512,7 +1534,7 @@ static int update_super1(struct supertype *st, struct mdinfo *info,
* If that couldn't happen, the "-nobackup" version
* will be used.
*/
- if (strcmp(update, "revert-reshape-nobackup") == 0 &&
+ if (update_enum == UOPT_SPEC_REVERT_RESHAPE_NOBACKUP &&
sb->reshape_position == 0 &&
(__le32_to_cpu(sb->delta_disks) > 0 ||
(__le32_to_cpu(sb->delta_disks) == 0 &&
@@ -1575,32 +1597,40 @@ static int update_super1(struct supertype *st, struct mdinfo *info,
}
done:;
}
- } else if (strcmp(update, "_reshape_progress") == 0)
+ break;
+ case UOPT_SPEC__RESHAPE_PROGRESS:
sb->reshape_position = __cpu_to_le64(info->reshape_progress);
- else if (strcmp(update, "writemostly") == 0)
+ break;
+ case UOPT_SPEC_WRITEMOSTLY:
sb->devflags |= WriteMostly1;
- else if (strcmp(update, "readwrite") == 0)
+ break;
+ case UOPT_SPEC_READWRITE:
sb->devflags &= ~WriteMostly1;
- else if (strcmp(update, "failfast") == 0)
+ break;
+ case UOPT_SPEC_FAILFAST:
sb->devflags |= FailFast1;
- else if (strcmp(update, "nofailfast") == 0)
+ break;
+ case UOPT_SPEC_NOFAILFAST:
sb->devflags &= ~FailFast1;
- else if (strcmp(update, "layout-original") == 0 ||
- strcmp(update, "layout-alternate") == 0 ||
- strcmp(update, "layout-unspecified") == 0) {
+ break;
+ case UOPT_LAYOUT_ORIGINAL:
+ case UOPT_LAYOUT_ALTERNATE:
+ case UOPT_LAYOUT_UNSPECIFIED:
if (__le32_to_cpu(sb->level) != 0) {
pr_err("%s: %s only supported for RAID0\n",
- devname?:"", update);
+ devname ?: "", map_num(update_options, update_enum));
rv = -1;
- } else if (strcmp(update, "layout-unspecified") == 0) {
+ } else if (update_enum == UOPT_LAYOUT_UNSPECIFIED) {
sb->feature_map &= ~__cpu_to_le32(MD_FEATURE_RAID0_LAYOUT);
sb->layout = 0;
} else {
sb->feature_map |= __cpu_to_le32(MD_FEATURE_RAID0_LAYOUT);
- sb->layout = __cpu_to_le32(update[7] == 'o' ? 1 : 2);
+ sb->layout = __cpu_to_le32(update_enum == UOPT_LAYOUT_ORIGINAL ? 1 : 2);
}
- } else
+ break;
+ default:
rv = -1;
+ }
sb->sb_csum = calc_sb_1_csum(sb);
--
2.38.1

View File

@ -0,0 +1,106 @@
From 4345e135c4c7dd04bb15bad140dfc4747f677738 Mon Sep 17 00:00:00 2001
From: Mateusz Kusiak <mateusz.kusiak@intel.com>
Date: Mon, 2 Jan 2023 09:35:21 +0100
Subject: [PATCH 73/83] super-intel: refactor the code for enum
It prepares super-intel for change context->update to enum.
Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
super-intel.c | 37 +++++++++++++++++++++++++------------
1 file changed, 25 insertions(+), 12 deletions(-)
diff --git a/super-intel.c b/super-intel.c
index 5f93f3d3..85fb7f17 100644
--- a/super-intel.c
+++ b/super-intel.c
@@ -3930,7 +3930,8 @@ static int update_super_imsm(struct supertype *st, struct mdinfo *info,
mpb = super->anchor;
- if (strcmp(update, "uuid") == 0) {
+ switch (map_name(update_options, update)) {
+ case UOPT_UUID:
/* We take this to mean that the family_num should be updated.
* However that is much smaller than the uuid so we cannot really
* allow an explicit uuid to be given. And it is hard to reliably
@@ -3954,10 +3955,14 @@ static int update_super_imsm(struct supertype *st, struct mdinfo *info,
}
if (rv == 0)
mpb->orig_family_num = info->uuid[0];
- } else if (strcmp(update, "assemble") == 0)
+ break;
+ case UOPT_SPEC_ASSEMBLE:
rv = 0;
- else
+ break;
+ default:
rv = -1;
+ break;
+ }
/* successful update? recompute checksum */
if (rv == 0)
@@ -7889,17 +7894,25 @@ static int kill_subarray_imsm(struct supertype *st, char *subarray_id)
return 0;
}
-static int get_rwh_policy_from_update(char *update)
+/**
+ * get_rwh_policy_from_update() - Get the rwh policy for update option.
+ * @update: Update option.
+ */
+static int get_rwh_policy_from_update(enum update_opt update)
{
- if (strcmp(update, "ppl") == 0)
+ switch (update) {
+ case UOPT_PPL:
return RWH_MULTIPLE_DISTRIBUTED;
- else if (strcmp(update, "no-ppl") == 0)
+ case UOPT_NO_PPL:
return RWH_MULTIPLE_OFF;
- else if (strcmp(update, "bitmap") == 0)
+ case UOPT_BITMAP:
return RWH_BITMAP;
- else if (strcmp(update, "no-bitmap") == 0)
+ case UOPT_NO_BITMAP:
return RWH_OFF;
- return -1;
+ default:
+ break;
+ }
+ return UOPT_UNDEFINED;
}
static int update_subarray_imsm(struct supertype *st, char *subarray,
@@ -7909,7 +7922,7 @@ static int update_subarray_imsm(struct supertype *st, char *subarray,
struct intel_super *super = st->sb;
struct imsm_super *mpb = super->anchor;
- if (strcmp(update, "name") == 0) {
+ if (map_name(update_options, update) == UOPT_NAME) {
char *name = ident->name;
char *ep;
int vol;
@@ -7943,7 +7956,7 @@ static int update_subarray_imsm(struct supertype *st, char *subarray,
}
super->updates_pending++;
}
- } else if (get_rwh_policy_from_update(update) != -1) {
+ } else if (get_rwh_policy_from_update(map_name(update_options, update)) != UOPT_UNDEFINED) {
int new_policy;
char *ep;
int vol = strtoul(subarray, &ep, 10);
@@ -7951,7 +7964,7 @@ static int update_subarray_imsm(struct supertype *st, char *subarray,
if (*ep != '\0' || vol >= super->anchor->num_raid_devs)
return 2;
- new_policy = get_rwh_policy_from_update(update);
+ new_policy = get_rwh_policy_from_update(map_name(update_options, update));
if (st->update_tail) {
struct imsm_update_rwh_policy *u = xmalloc(sizeof(*u));
--
2.38.1

View File

@ -0,0 +1,424 @@
From 03312b5240438ffc3b63114bdc87e911222f01e5 Mon Sep 17 00:00:00 2001
From: Mateusz Kusiak <mateusz.kusiak@intel.com>
Date: Mon, 2 Jan 2023 09:35:22 +0100
Subject: [PATCH 74/83] Change update to enum in update_super and
update_subarray
Use already existing enum, change update_super and update_subarray
update to enum globally.
Refactor function references also.
Remove code specific options from update_options.
Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
Assemble.c | 14 +++++++++-----
Examine.c | 2 +-
Grow.c | 9 +++++----
Manage.c | 14 ++++++++------
maps.c | 21 ---------------------
mdadm.h | 12 +++++++++---
super-intel.c | 16 ++++++++--------
super0.c | 9 ++++-----
super1.c | 17 ++++++++---------
9 files changed, 52 insertions(+), 62 deletions(-)
diff --git a/Assemble.c b/Assemble.c
index 8b0af0c9..dba910cd 100644
--- a/Assemble.c
+++ b/Assemble.c
@@ -695,12 +695,16 @@ static int load_devices(struct devs *devices, char *devmap,
} else if (strcmp(c->update, "revert-reshape") == 0 &&
c->invalid_backup)
err = tst->ss->update_super(tst, content,
- "revert-reshape-nobackup",
+ UOPT_SPEC_REVERT_RESHAPE_NOBACKUP,
devname, c->verbose,
ident->uuid_set,
c->homehost);
else
- err = tst->ss->update_super(tst, content, c->update,
+ /*
+ * Mapping is temporary, will be removed in this patchset
+ */
+ err = tst->ss->update_super(tst, content,
+ map_name(update_options, c->update),
devname, c->verbose,
ident->uuid_set,
c->homehost);
@@ -960,7 +964,7 @@ static int force_array(struct mdinfo *content,
continue;
}
content->events = devices[most_recent].i.events;
- tst->ss->update_super(tst, content, "force-one",
+ tst->ss->update_super(tst, content, UOPT_SPEC_FORCE_ONE,
devices[chosen_drive].devname, c->verbose,
0, NULL);
@@ -1788,7 +1792,7 @@ try_again:
if (!(devices[j].i.array.state & 1))
clean = 0;
- if (st->ss->update_super(st, &devices[j].i, "assemble", NULL,
+ if (st->ss->update_super(st, &devices[j].i, UOPT_SPEC_ASSEMBLE, NULL,
c->verbose, 0, NULL)) {
if (c->force) {
if (c->verbose >= 0)
@@ -1811,7 +1815,7 @@ try_again:
if (c->force && !clean && !is_container(content->array.level) &&
!enough(content->array.level, content->array.raid_disks,
content->array.layout, clean, avail)) {
- change += st->ss->update_super(st, content, "force-array",
+ change += st->ss->update_super(st, content, UOPT_SPEC_FORCE_ARRAY,
devices[chosen_drive].devname, c->verbose,
0, NULL);
was_forced = 1;
diff --git a/Examine.c b/Examine.c
index 9574a3cc..c9605a60 100644
--- a/Examine.c
+++ b/Examine.c
@@ -117,7 +117,7 @@ int Examine(struct mddev_dev *devlist,
}
if (c->SparcAdjust)
- st->ss->update_super(st, NULL, "sparc2.2",
+ st->ss->update_super(st, NULL, UOPT_SPARC22,
devlist->devname, 0, 0, NULL);
/* Ok, its good enough to try, though the checksum could be wrong */
diff --git a/Grow.c b/Grow.c
index b73ec2ae..82d5d2ea 100644
--- a/Grow.c
+++ b/Grow.c
@@ -196,7 +196,7 @@ int Grow_Add_device(char *devname, int fd, char *newdev)
info.disk.minor = minor(rdev);
info.disk.raid_disk = d;
info.disk.state = (1 << MD_DISK_SYNC) | (1 << MD_DISK_ACTIVE);
- if (st->ss->update_super(st, &info, "linear-grow-new", newdev,
+ if (st->ss->update_super(st, &info, UOPT_SPEC_LINEAR_GROW_NEW, newdev,
0, 0, NULL) != 0) {
pr_err("Preparing new metadata failed on %s\n", newdev);
close(nfd);
@@ -254,7 +254,7 @@ int Grow_Add_device(char *devname, int fd, char *newdev)
info.array.active_disks = nd+1;
info.array.working_disks = nd+1;
- if (st->ss->update_super(st, &info, "linear-grow-update", dv,
+ if (st->ss->update_super(st, &info, UOPT_SPEC_LINEAR_GROW_UPDATE, dv,
0, 0, NULL) != 0) {
pr_err("Updating metadata failed on %s\n", dv);
close(fd2);
@@ -668,7 +668,7 @@ int Grow_consistency_policy(char *devname, int fd, struct context *c, struct sha
goto free_info;
}
- ret = st->ss->update_super(st, sra, "ppl",
+ ret = st->ss->update_super(st, sra, UOPT_PPL,
devname,
c->verbose, 0, NULL);
if (ret) {
@@ -4950,7 +4950,8 @@ int Grow_restart(struct supertype *st, struct mdinfo *info, int *fdlist,
continue;
st->ss->getinfo_super(st, &dinfo, NULL);
dinfo.reshape_progress = info->reshape_progress;
- st->ss->update_super(st, &dinfo, "_reshape_progress",
+ st->ss->update_super(st, &dinfo,
+ UOPT_SPEC__RESHAPE_PROGRESS,
NULL,0, 0, NULL);
st->ss->store_super(st, fdlist[j]);
st->ss->free_super(st);
diff --git a/Manage.c b/Manage.c
index 5a9ea316..87b8aa0c 100644
--- a/Manage.c
+++ b/Manage.c
@@ -605,6 +605,7 @@ int attempt_re_add(int fd, int tfd, struct mddev_dev *dv,
struct mdinfo mdi;
int duuid[4];
int ouuid[4];
+ enum update_opt update_enum = map_name(update_options, update);
dev_st->ss->getinfo_super(dev_st, &mdi, NULL);
dev_st->ss->uuid_from_super(dev_st, ouuid);
@@ -666,23 +667,23 @@ int attempt_re_add(int fd, int tfd, struct mddev_dev *dv,
if (dv->writemostly == FlagSet)
rv = dev_st->ss->update_super(
- dev_st, NULL, "writemostly",
+ dev_st, NULL, UOPT_SPEC_WRITEMOSTLY,
devname, verbose, 0, NULL);
if (dv->writemostly == FlagClear)
rv = dev_st->ss->update_super(
- dev_st, NULL, "readwrite",
+ dev_st, NULL, UOPT_SPEC_READWRITE,
devname, verbose, 0, NULL);
if (dv->failfast == FlagSet)
rv = dev_st->ss->update_super(
- dev_st, NULL, "failfast",
+ dev_st, NULL, UOPT_SPEC_FAILFAST,
devname, verbose, 0, NULL);
if (dv->failfast == FlagClear)
rv = dev_st->ss->update_super(
- dev_st, NULL, "nofailfast",
+ dev_st, NULL, UOPT_SPEC_NOFAILFAST,
devname, verbose, 0, NULL);
if (update)
rv = dev_st->ss->update_super(
- dev_st, NULL, update,
+ dev_st, NULL, update_enum,
devname, verbose, 0, NULL);
if (rv == 0)
rv = dev_st->ss->store_super(dev_st, tfd);
@@ -1731,6 +1732,7 @@ int Update_subarray(char *dev, char *subarray, char *update, struct mddev_ident
struct supertype supertype, *st = &supertype;
int fd, rv = 2;
struct mdinfo *info = NULL;
+ enum update_opt update_enum = map_name(update_options, update);
memset(st, 0, sizeof(*st));
@@ -1762,7 +1764,7 @@ int Update_subarray(char *dev, char *subarray, char *update, struct mddev_ident
goto free_super;
}
- rv = st->ss->update_subarray(st, subarray, update, ident);
+ rv = st->ss->update_subarray(st, subarray, update_enum, ident);
if (rv) {
if (verbose >= 0)
diff --git a/maps.c b/maps.c
index c59036f1..b586679a 100644
--- a/maps.c
+++ b/maps.c
@@ -194,27 +194,6 @@ mapping_t update_options[] = {
{ "byteorder", UOPT_BYTEORDER },
{ "help", UOPT_HELP },
{ "?", UOPT_HELP },
- /*
- * Those enries are temporary and will be removed in this patchset.
- *
- * Before update_super:update can be changed to enum,
- * all update_super sub-functions must be adapted first.
- * Update options will be passed as string (as it is for now),
- * and then mapped, so all options must be handled temporarily.
- *
- * Those options code specific and should not be accessible for user.
- */
- { "force-one", UOPT_SPEC_FORCE_ONE },
- { "force-array", UOPT_SPEC_FORCE_ARRAY },
- { "assemble", UOPT_SPEC_ASSEMBLE },
- { "linear-grow-new", UOPT_SPEC_LINEAR_GROW_NEW },
- { "linear-grow-update", UOPT_SPEC_LINEAR_GROW_UPDATE },
- { "_reshape_progress", UOPT_SPEC__RESHAPE_PROGRESS },
- { "writemostly", UOPT_SPEC_WRITEMOSTLY },
- { "readwrite", UOPT_SPEC_READWRITE },
- { "failfast", UOPT_SPEC_FAILFAST },
- { "nofailfast", UOPT_SPEC_NOFAILFAST },
- { "revert-reshape-nobackup", UOPT_SPEC_REVERT_RESHAPE_NOBACKUP },
{ NULL, UOPT_UNDEFINED}
};
diff --git a/mdadm.h b/mdadm.h
index 31db25f5..5dc94390 100644
--- a/mdadm.h
+++ b/mdadm.h
@@ -1011,7 +1011,7 @@ extern struct superswitch {
* it will resume going in the opposite direction.
*/
int (*update_super)(struct supertype *st, struct mdinfo *info,
- char *update,
+ enum update_opt update,
char *devname, int verbose,
int uuid_set, char *homehost);
@@ -1137,9 +1137,15 @@ extern struct superswitch {
/* Permit subarray's to be deleted from inactive containers */
int (*kill_subarray)(struct supertype *st,
char *subarray_id); /* optional */
- /* Permit subarray's to be modified */
+ /**
+ * update_subarray() - Permit subarray to be modified.
+ * @st: Supertype.
+ * @subarray: Subarray name.
+ * @update: Update option.
+ * @ident: Optional identifiers.
+ */
int (*update_subarray)(struct supertype *st, char *subarray,
- char *update, struct mddev_ident *ident); /* optional */
+ enum update_opt update, struct mddev_ident *ident);
/* Check if reshape is supported for this external format.
* st is obtained from super_by_fd() where st->subarray[0] is
* initialized to indicate if reshape is being performed at the
diff --git a/super-intel.c b/super-intel.c
index 85fb7f17..1f5f6eda 100644
--- a/super-intel.c
+++ b/super-intel.c
@@ -3893,8 +3893,8 @@ struct mdinfo *getinfo_super_disks_imsm(struct supertype *st)
}
static int update_super_imsm(struct supertype *st, struct mdinfo *info,
- char *update, char *devname, int verbose,
- int uuid_set, char *homehost)
+ enum update_opt update, char *devname,
+ int verbose, int uuid_set, char *homehost)
{
/* For 'assemble' and 'force' we need to return non-zero if any
* change was made. For others, the return value is ignored.
@@ -3930,7 +3930,7 @@ static int update_super_imsm(struct supertype *st, struct mdinfo *info,
mpb = super->anchor;
- switch (map_name(update_options, update)) {
+ switch (update) {
case UOPT_UUID:
/* We take this to mean that the family_num should be updated.
* However that is much smaller than the uuid so we cannot really
@@ -6538,7 +6538,7 @@ static int validate_ppl_imsm(struct supertype *st, struct mdinfo *info,
if (mdmon_running(st->container_devnm))
st->update_tail = &st->updates;
- if (st->ss->update_subarray(st, subarray, "ppl", NULL)) {
+ if (st->ss->update_subarray(st, subarray, UOPT_PPL, NULL)) {
pr_err("Failed to update subarray %s\n",
subarray);
} else {
@@ -7916,13 +7916,13 @@ static int get_rwh_policy_from_update(enum update_opt update)
}
static int update_subarray_imsm(struct supertype *st, char *subarray,
- char *update, struct mddev_ident *ident)
+ enum update_opt update, struct mddev_ident *ident)
{
/* update the subarray currently referenced by ->current_vol */
struct intel_super *super = st->sb;
struct imsm_super *mpb = super->anchor;
- if (map_name(update_options, update) == UOPT_NAME) {
+ if (update == UOPT_NAME) {
char *name = ident->name;
char *ep;
int vol;
@@ -7956,7 +7956,7 @@ static int update_subarray_imsm(struct supertype *st, char *subarray,
}
super->updates_pending++;
}
- } else if (get_rwh_policy_from_update(map_name(update_options, update)) != UOPT_UNDEFINED) {
+ } else if (get_rwh_policy_from_update(update) != UOPT_UNDEFINED) {
int new_policy;
char *ep;
int vol = strtoul(subarray, &ep, 10);
@@ -7964,7 +7964,7 @@ static int update_subarray_imsm(struct supertype *st, char *subarray,
if (*ep != '\0' || vol >= super->anchor->num_raid_devs)
return 2;
- new_policy = get_rwh_policy_from_update(map_name(update_options, update));
+ new_policy = get_rwh_policy_from_update(update);
if (st->update_tail) {
struct imsm_update_rwh_policy *u = xmalloc(sizeof(*u));
diff --git a/super0.c b/super0.c
index d9f5bff4..a7c5f813 100644
--- a/super0.c
+++ b/super0.c
@@ -491,7 +491,7 @@ static struct mdinfo *container_content0(struct supertype *st, char *subarray)
}
static int update_super0(struct supertype *st, struct mdinfo *info,
- char *update,
+ enum update_opt update,
char *devname, int verbose,
int uuid_set, char *homehost)
{
@@ -502,20 +502,19 @@ static int update_super0(struct supertype *st, struct mdinfo *info,
int rv = 0;
int uuid[4];
mdp_super_t *sb = st->sb;
- enum update_opt update_enum = map_name(update_options, update);
- if (update_enum == UOPT_HOMEHOST && homehost) {
+ if (update == UOPT_HOMEHOST && homehost) {
/*
* note that 'homehost' is special as it is really
* a "uuid" update.
*/
uuid_set = 0;
- update_enum = UOPT_UUID;
+ update = UOPT_UUID;
info->uuid[0] = sb->set_uuid0;
info->uuid[1] = sb->set_uuid1;
}
- switch (update_enum) {
+ switch (update) {
case UOPT_UUID:
if (!uuid_set && homehost) {
char buf[20];
diff --git a/super1.c b/super1.c
index b0a97016..f7020320 100644
--- a/super1.c
+++ b/super1.c
@@ -1208,7 +1208,7 @@ static struct mdinfo *container_content1(struct supertype *st, char *subarray)
}
static int update_super1(struct supertype *st, struct mdinfo *info,
- char *update, char *devname, int verbose,
+ enum update_opt update, char *devname, int verbose,
int uuid_set, char *homehost)
{
/* NOTE: for 'assemble' and 'force' we need to return non-zero
@@ -1218,15 +1218,14 @@ static int update_super1(struct supertype *st, struct mdinfo *info,
int rv = 0;
struct mdp_superblock_1 *sb = st->sb;
bitmap_super_t *bms = (bitmap_super_t*)(((char*)sb) + MAX_SB_SIZE);
- enum update_opt update_enum = map_name(update_options, update);
- if (update_enum == UOPT_HOMEHOST && homehost) {
+ if (update == UOPT_HOMEHOST && homehost) {
/*
* Note that 'homehost' is special as it is really
* a "name" update.
*/
char *c;
- update_enum = UOPT_NAME;
+ update = UOPT_NAME;
c = strchr(sb->set_name, ':');
if (c)
snprintf(info->name, sizeof(info->name), "%s", c+1);
@@ -1234,7 +1233,7 @@ static int update_super1(struct supertype *st, struct mdinfo *info,
snprintf(info->name, sizeof(info->name), "%s", sb->set_name);
}
- switch (update_enum) {
+ switch (update) {
case UOPT_NAME: {
int namelen;
@@ -1534,7 +1533,7 @@ static int update_super1(struct supertype *st, struct mdinfo *info,
* If that couldn't happen, the "-nobackup" version
* will be used.
*/
- if (update_enum == UOPT_SPEC_REVERT_RESHAPE_NOBACKUP &&
+ if (update == UOPT_SPEC_REVERT_RESHAPE_NOBACKUP &&
sb->reshape_position == 0 &&
(__le32_to_cpu(sb->delta_disks) > 0 ||
(__le32_to_cpu(sb->delta_disks) == 0 &&
@@ -1618,14 +1617,14 @@ static int update_super1(struct supertype *st, struct mdinfo *info,
case UOPT_LAYOUT_UNSPECIFIED:
if (__le32_to_cpu(sb->level) != 0) {
pr_err("%s: %s only supported for RAID0\n",
- devname ?: "", map_num(update_options, update_enum));
+ devname ?: "", map_num(update_options, update));
rv = -1;
- } else if (update_enum == UOPT_LAYOUT_UNSPECIFIED) {
+ } else if (update == UOPT_LAYOUT_UNSPECIFIED) {
sb->feature_map &= ~__cpu_to_le32(MD_FEATURE_RAID0_LAYOUT);
sb->layout = 0;
} else {
sb->feature_map |= __cpu_to_le32(MD_FEATURE_RAID0_LAYOUT);
- sb->layout = __cpu_to_le32(update_enum == UOPT_LAYOUT_ORIGINAL ? 1 : 2);
+ sb->layout = __cpu_to_le32(update == UOPT_LAYOUT_ORIGINAL ? 1 : 2);
}
break;
default:
--
2.38.1

View File

@ -0,0 +1,279 @@
From f2e8393bd7223c419aaa33c45feeb5c75440b986 Mon Sep 17 00:00:00 2001
From: Mateusz Kusiak <mateusz.kusiak@intel.com>
Date: Mon, 2 Jan 2023 09:35:23 +0100
Subject: [PATCH 75/83] Manage&Incremental: code refactor, string to enum
Prepare Manage and Incremental for later changing context->update to enum.
Change update from string to enum in multiple functions and pass enum
where already possible.
Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
---
Grow.c | 8 ++++----
Incremental.c | 8 ++++----
Manage.c | 35 +++++++++++++++++------------------
mdadm.c | 23 ++++++++++++++++++-----
mdadm.h | 4 ++--
5 files changed, 45 insertions(+), 33 deletions(-)
diff --git a/Grow.c b/Grow.c
index 82d5d2ea..8f5cf07d 100644
--- a/Grow.c
+++ b/Grow.c
@@ -605,12 +605,12 @@ int Grow_consistency_policy(char *devname, int fd, struct context *c, struct sha
}
if (subarray) {
- char *update;
+ enum update_opt update;
if (s->consistency_policy == CONSISTENCY_POLICY_PPL)
- update = "ppl";
+ update = UOPT_PPL;
else
- update = "no-ppl";
+ update = UOPT_NO_PPL;
sprintf(container_dev, "/dev/%s", st->container_devnm);
@@ -3243,7 +3243,7 @@ static int reshape_array(char *container, int fd, char *devname,
* level and frozen, we can safely add them.
*/
if (devlist) {
- if (Manage_subdevs(devname, fd, devlist, verbose, 0, NULL, 0))
+ if (Manage_subdevs(devname, fd, devlist, verbose, 0, UOPT_UNDEFINED, 0))
goto release;
}
diff --git a/Incremental.c b/Incremental.c
index 5a5f4c4c..ff3548c0 100644
--- a/Incremental.c
+++ b/Incremental.c
@@ -1025,7 +1025,7 @@ static int array_try_spare(char *devname, int *dfdp, struct dev_policy *pol,
close(dfd);
*dfdp = -1;
rv = Manage_subdevs(chosen->sys_name, mdfd, &devlist,
- -1, 0, NULL, 0);
+ -1, 0, UOPT_UNDEFINED, 0);
close(mdfd);
}
if (verbose > 0) {
@@ -1666,7 +1666,7 @@ static void remove_from_member_array(struct mdstat_ent *memb,
if (subfd >= 0) {
rv = Manage_subdevs(memb->devnm, subfd, devlist, verbose,
- 0, NULL, 0);
+ 0, UOPT_UNDEFINED, 0);
if (rv & 2) {
if (sysfs_init(&mmdi, -1, memb->devnm))
pr_err("unable to initialize sysfs for: %s\n",
@@ -1758,7 +1758,7 @@ int IncrementalRemove(char *devname, char *id_path, int verbose)
free_mdstat(mdstat);
} else {
rv |= Manage_subdevs(ent->devnm, mdfd, &devlist,
- verbose, 0, NULL, 0);
+ verbose, 0, UOPT_UNDEFINED, 0);
if (rv & 2) {
/* Failed due to EBUSY, try to stop the array.
* Give udisks a chance to unmount it first.
@@ -1770,7 +1770,7 @@ int IncrementalRemove(char *devname, char *id_path, int verbose)
devlist.disposition = 'r';
rv = Manage_subdevs(ent->devnm, mdfd, &devlist,
- verbose, 0, NULL, 0);
+ verbose, 0, UOPT_UNDEFINED, 0);
end:
close(mdfd);
free_mdstat(ent);
diff --git a/Manage.c b/Manage.c
index 87b8aa0c..594e3d2c 100644
--- a/Manage.c
+++ b/Manage.c
@@ -598,14 +598,12 @@ static void add_set(struct mddev_dev *dv, int fd, char set_char)
int attempt_re_add(int fd, int tfd, struct mddev_dev *dv,
struct supertype *dev_st, struct supertype *tst,
- unsigned long rdev,
- char *update, char *devname, int verbose,
- mdu_array_info_t *array)
+ unsigned long rdev, enum update_opt update,
+ char *devname, int verbose, mdu_array_info_t *array)
{
struct mdinfo mdi;
int duuid[4];
int ouuid[4];
- enum update_opt update_enum = map_name(update_options, update);
dev_st->ss->getinfo_super(dev_st, &mdi, NULL);
dev_st->ss->uuid_from_super(dev_st, ouuid);
@@ -683,7 +681,7 @@ int attempt_re_add(int fd, int tfd, struct mddev_dev *dv,
devname, verbose, 0, NULL);
if (update)
rv = dev_st->ss->update_super(
- dev_st, NULL, update_enum,
+ dev_st, NULL, update,
devname, verbose, 0, NULL);
if (rv == 0)
rv = dev_st->ss->store_super(dev_st, tfd);
@@ -715,8 +713,8 @@ skip_re_add:
int Manage_add(int fd, int tfd, struct mddev_dev *dv,
struct supertype *tst, mdu_array_info_t *array,
int force, int verbose, char *devname,
- char *update, unsigned long rdev, unsigned long long array_size,
- int raid_slot)
+ enum update_opt update, unsigned long rdev,
+ unsigned long long array_size, int raid_slot)
{
unsigned long long ldsize;
struct supertype *dev_st;
@@ -1332,7 +1330,7 @@ bool is_remove_safe(mdu_array_info_t *array, const int fd, char *devname, const
int Manage_subdevs(char *devname, int fd,
struct mddev_dev *devlist, int verbose, int test,
- char *update, int force)
+ enum update_opt update, int force)
{
/* Do something to each dev.
* devmode can be
@@ -1727,12 +1725,13 @@ int autodetect(void)
return rv;
}
-int Update_subarray(char *dev, char *subarray, char *update, struct mddev_ident *ident, int verbose)
+int Update_subarray(char *dev, char *subarray, enum update_opt update,
+ struct mddev_ident *ident, int verbose)
{
struct supertype supertype, *st = &supertype;
int fd, rv = 2;
struct mdinfo *info = NULL;
- enum update_opt update_enum = map_name(update_options, update);
+ char *update_verb = map_num(update_options, update);
memset(st, 0, sizeof(*st));
@@ -1750,7 +1749,7 @@ int Update_subarray(char *dev, char *subarray, char *update, struct mddev_ident
if (is_subarray_active(subarray, st->devnm)) {
if (verbose >= 0)
pr_err("Subarray %s in %s is active, cannot update %s\n",
- subarray, dev, update);
+ subarray, dev, update_verb);
goto free_super;
}
@@ -1759,23 +1758,23 @@ int Update_subarray(char *dev, char *subarray, char *update, struct mddev_ident
info = st->ss->container_content(st, subarray);
- if (strncmp(update, "ppl", 3) == 0 && !is_level456(info->array.level)) {
+ if (update == UOPT_PPL && !is_level456(info->array.level)) {
pr_err("RWH policy ppl is supported only for raid4, raid5 and raid6.\n");
goto free_super;
}
- rv = st->ss->update_subarray(st, subarray, update_enum, ident);
+ rv = st->ss->update_subarray(st, subarray, update, ident);
if (rv) {
if (verbose >= 0)
pr_err("Failed to update %s of subarray-%s in %s\n",
- update, subarray, dev);
+ update_verb, subarray, dev);
} else if (st->update_tail)
flush_metadata_updates(st);
else
st->ss->sync_metadata(st);
- if (rv == 0 && strcmp(update, "name") == 0 && verbose >= 0)
+ if (rv == 0 && update == UOPT_NAME && verbose >= 0)
pr_err("Updated subarray-%s name from %s, UUIDs may have changed\n",
subarray, dev);
@@ -1816,10 +1815,10 @@ int move_spare(char *from_devname, char *to_devname, dev_t devid)
sprintf(devname, "%d:%d", major(devid), minor(devid));
devlist.disposition = 'r';
- if (Manage_subdevs(from_devname, fd2, &devlist, -1, 0, NULL, 0) == 0) {
+ if (Manage_subdevs(from_devname, fd2, &devlist, -1, 0, UOPT_UNDEFINED, 0) == 0) {
devlist.disposition = 'a';
if (Manage_subdevs(to_devname, fd1, &devlist, -1, 0,
- NULL, 0) == 0) {
+ UOPT_UNDEFINED, 0) == 0) {
/* make sure manager is aware of changes */
ping_manager(to_devname);
ping_manager(from_devname);
@@ -1829,7 +1828,7 @@ int move_spare(char *from_devname, char *to_devname, dev_t devid)
}
else
Manage_subdevs(from_devname, fd2, &devlist,
- -1, 0, NULL, 0);
+ -1, 0, UOPT_UNDEFINED, 0);
}
close(fd1);
close(fd2);
diff --git a/mdadm.c b/mdadm.c
index f5f505fe..d06e2820 100644
--- a/mdadm.c
+++ b/mdadm.c
@@ -1402,10 +1402,22 @@ int main(int argc, char *argv[])
/* readonly, add/remove, readwrite, runstop */
if (c.readonly > 0)
rv = Manage_ro(devlist->devname, mdfd, c.readonly);
- if (!rv && devs_found>1)
- rv = Manage_subdevs(devlist->devname, mdfd,
- devlist->next, c.verbose, c.test,
- c.update, c.force);
+ if (!rv && devs_found > 1) {
+ /*
+ * This is temporary and will be removed in next patches
+ * Null c.update will cause segfault
+ */
+ if (c.update)
+ rv = Manage_subdevs(devlist->devname, mdfd,
+ devlist->next, c.verbose, c.test,
+ map_name(update_options, c.update),
+ c.force);
+ else
+ rv = Manage_subdevs(devlist->devname, mdfd,
+ devlist->next, c.verbose, c.test,
+ UOPT_UNDEFINED,
+ c.force);
+ }
if (!rv && c.readonly < 0)
rv = Manage_ro(devlist->devname, mdfd, c.readonly);
if (!rv && c.runstop > 0)
@@ -1931,7 +1943,8 @@ static int misc_list(struct mddev_dev *devlist,
continue;
}
rv |= Update_subarray(dv->devname, c->subarray,
- c->update, ident, c->verbose);
+ map_name(update_options, c->update),
+ ident, c->verbose);
continue;
case Dump:
rv |= Dump_metadata(dv->devname, dump_directory, c, ss);
diff --git a/mdadm.h b/mdadm.h
index 5dc94390..924f4b63 100644
--- a/mdadm.h
+++ b/mdadm.h
@@ -1478,7 +1478,7 @@ extern int Manage_stop(char *devname, int fd, int quiet,
int will_retry);
extern int Manage_subdevs(char *devname, int fd,
struct mddev_dev *devlist, int verbose, int test,
- char *update, int force);
+ enum update_opt update, int force);
extern int autodetect(void);
extern int Grow_Add_device(char *devname, int fd, char *newdev);
extern int Grow_addbitmap(char *devname, int fd,
@@ -1532,7 +1532,7 @@ extern int Monitor(struct mddev_dev *devlist,
extern int Kill(char *dev, struct supertype *st, int force, int verbose, int noexcl);
extern int Kill_subarray(char *dev, char *subarray, int verbose);
-extern int Update_subarray(char *dev, char *subarray, char *update, struct mddev_ident *ident, int quiet);
+extern int Update_subarray(char *dev, char *subarray, enum update_opt update, struct mddev_ident *ident, int quiet);
extern int Wait(char *dev);
extern int WaitClean(char *dev, int verbose);
extern int SetAction(char *dev, char *action);
--
2.38.1

Some files were not shown because too many files have changed in this diff Show More