.gitignore

@@ -1,5 +1 @@
-.build*
-clog
-*.src.rpm
-*/
-/mdadm-4.*.tar.xz
+SOURCES/mdadm-4.2.tar.xz

.mdadm.metadata

@@ -0,0 +1 @@
+27f240cff200e00c28a486a028bcdb14f67f8790 SOURCES/mdadm-4.2.tar.xz

0001-Remove-hardcoded-checkpoint-interval-checking.patch

@@ -1,64 +0,0 @@
-From aec3b907de48be54106600a1ecb69d1231f4801d Mon Sep 17 00:00:00 2001
-From: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Date: Thu, 18 Jan 2024 11:30:15 +0100
-Subject: [PATCH 01/41] Remove hardcoded checkpoint interval checking
-
-Mdmon assumes that kernel marks checkpoint every 1/16 of the volume size
-and that the checkpoints are equal in size. This is not true, kernel may
-mark checkpoints more frequently depending on several factors, including
-sync speed. This results in checkpoints reported by mdadm --examine
-falling behind the one reported by kernel.
-
-Remove hardcoded checkpoint interval checking.
-
-Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- monitor.c | 22 ++++++----------------
- 1 file changed, 6 insertions(+), 16 deletions(-)
-
-diff --git a/monitor.c b/monitor.c
-index 4acec678..b8d9e881 100644
---- a/monitor.c
-+++ b/monitor.c
-@@ -564,22 +564,10 @@ static int read_and_act(struct active_array *a, fd_set *fds)
- 		}
- 	}
- 
--	/* Check for recovery checkpoint notifications.  We need to be a
--	 * minimum distance away from the last checkpoint to prevent
--	 * over checkpointing.  Note reshape checkpointing is handled
--	 * in the second branch.
-+	/* Handle reshape checkpointing
- 	 */
--	if (sync_completed > a->last_checkpoint &&
--	    sync_completed - a->last_checkpoint > a->info.component_size >> 4 &&
--	    a->curr_action > reshape) {
--		/* A (non-reshape) sync_action has reached a checkpoint.
--		 * Record the updated position in the metadata
--		 */
--		a->last_checkpoint = sync_completed;
--		a->container->ss->set_array_state(a, a->curr_state <= clean);
--	} else if ((a->curr_action == idle && a->prev_action == reshape) ||
--		   (a->curr_action == reshape &&
--		    sync_completed > a->last_checkpoint)) {
-+	if ((a->curr_action == idle && a->prev_action == reshape) ||
-+	    (a->curr_action == reshape && sync_completed > a->last_checkpoint)) {
- 		/* Reshape has progressed or completed so we need to
- 		 * update the array state - and possibly the array size
- 		 */
-@@ -607,8 +595,10 @@ static int read_and_act(struct active_array *a, fd_set *fds)
- 		a->last_checkpoint = sync_completed;
- 	}
- 
--	if (sync_completed > a->last_checkpoint)
-+	if (sync_completed > a->last_checkpoint) {
- 		a->last_checkpoint = sync_completed;
-+		a->container->ss->set_array_state(a, a->curr_state <= clean);
-+	}
- 
- 	if (sync_completed >= a->info.component_size)
- 		a->last_checkpoint = 0;
--- 
-2.40.1
-

0002-monitor-refactor-checkpoint-update.patch

@@ -1,96 +0,0 @@
-From cf87fe75fd83dac008ea116c2c52ec69783fdf6a Mon Sep 17 00:00:00 2001
-From: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Date: Thu, 18 Jan 2024 11:30:16 +0100
-Subject: [PATCH 02/41] monitor: refactor checkpoint update
-
-"if" statements of checkpoint updates have too many responsibilties.
-This results in unclear code flow and duplicated code.
-
-Refactor checkpoint update code and simplify "if" statements.
-
-Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- monitor.c | 51 +++++++++++++++++++++++++--------------------------
- 1 file changed, 25 insertions(+), 26 deletions(-)
-
-diff --git a/monitor.c b/monitor.c
-index b8d9e881..be0bec78 100644
---- a/monitor.c
-+++ b/monitor.c
-@@ -412,6 +412,7 @@ static int read_and_act(struct active_array *a, fd_set *fds)
- 	int ret = 0;
- 	int count = 0;
- 	struct timeval tv;
-+	bool write_checkpoint = false;
- 
- 	a->next_state = bad_word;
- 	a->next_action = bad_action;
-@@ -564,40 +565,38 @@ static int read_and_act(struct active_array *a, fd_set *fds)
- 		}
- 	}
- 
--	/* Handle reshape checkpointing
--	 */
--	if ((a->curr_action == idle && a->prev_action == reshape) ||
--	    (a->curr_action == reshape && sync_completed > a->last_checkpoint)) {
--		/* Reshape has progressed or completed so we need to
--		 * update the array state - and possibly the array size
--		 */
-+	/* Update reshape checkpoint, depending if it finished or progressed */
-+	if (a->curr_action == idle && a->prev_action == reshape) {
-+		char buf[SYSFS_MAX_BUF_SIZE];
-+
- 		if (sync_completed != 0)
- 			a->last_checkpoint = sync_completed;
--		/* We might need to update last_checkpoint depending on
--		 * the reason that reshape finished.
--		 * if array reshape is really finished:
--		 *        set check point to the end, this allows
--		 *        set_array_state() to finalize reshape in metadata
--		 * if reshape if broken: do not set checkpoint to the end
--		 *        this allows for reshape restart from checkpoint
-+
-+		/*
-+		 * If reshape really finished, set checkpoint to the end to finalize it.
-+		 * Do not set checkpoint if reshape is broken.
-+		 * Reshape will restart from last checkpoint.
- 		 */
--		if ((a->curr_action != reshape) &&
--		    (a->prev_action == reshape)) {
--			char buf[SYSFS_MAX_BUF_SIZE];
--			if ((sysfs_get_str(&a->info, NULL,
--					  "reshape_position",
--					  buf,
--					  sizeof(buf)) >= 0) &&
--			     str_is_none(buf) == true)
-+		if (sysfs_get_str(&a->info, NULL, "reshape_position", buf, sizeof(buf)) >= 0)
-+			if (str_is_none(buf) == true)
- 				a->last_checkpoint = a->info.component_size;
--		}
--		a->container->ss->set_array_state(a, a->curr_state <= clean);
--		a->last_checkpoint = sync_completed;
-+
-+		write_checkpoint = true;
- 	}
- 
--	if (sync_completed > a->last_checkpoint) {
-+	if (a->curr_action >= reshape && sync_completed > a->last_checkpoint) {
-+		/* Update checkpoint if neither reshape nor idle action */
- 		a->last_checkpoint = sync_completed;
-+
-+		write_checkpoint = true;
-+	}
-+
-+	/* Save checkpoint */
-+	if (write_checkpoint) {
- 		a->container->ss->set_array_state(a, a->curr_state <= clean);
-+
-+		if (a->curr_action <= reshape)
-+			a->last_checkpoint = sync_completed;
- 	}
- 
- 	if (sync_completed >= a->info.component_size)
--- 
-2.40.1
-

0003-Super-intel-Fix-first-checkpoint-restart.patch

@@ -1,47 +0,0 @@
-From fdb7e802f4cf64d067c3abaafa35056e2bc1ed43 Mon Sep 17 00:00:00 2001
-From: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Date: Thu, 18 Jan 2024 11:30:17 +0100
-Subject: [PATCH 03/41] Super-intel: Fix first checkpoint restart
-
-When imsm based array is stopped after reaching first checkpoint and
-then assembled, first checkpoint is reported as 0.
-
-This behaviour is valid only for initial checkpoint, if the array was
-stopped while performing some action.
-
-Last checkpoint value is not taken from metadata but always starts
-with 0 and it's incremented when sync_completed in sysfs changes.
-
-In simplification, read_and_act() is responsible for checkpoint updates
-and is executed each time sysfs checkpoint update happens. For first
-checkpoint it is executed twice and due to marking checkpoint before
-triggering any action on the array, it is impossible to read
-sync_completed from sysfs in just two iterations.
-
-The workaround to this is not marking any checkpoint for first
-sysfs checkpoint after RAID assembly, to preserve checkpoint value
-stored in metadata.
-
-Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- super-intel.c | 3 +++
- 1 file changed, 3 insertions(+)
-
-diff --git a/super-intel.c b/super-intel.c
-index dbea235d..e61f3f6f 100644
---- a/super-intel.c
-+++ b/super-intel.c
-@@ -8771,6 +8771,9 @@ static int imsm_set_array_state(struct active_array *a, int consistent)
- 		super->updates_pending++;
- 	}
- 
-+	if (a->prev_action == idle)
-+		goto skip_mark_checkpoint;
-+
- mark_checkpoint:
- 	/* skip checkpointing for general migration,
- 	 * it is controlled in mdadm
--- 
-2.40.1
-

0004-Grow-Move-update_tail-assign-to-Grow_reshape.patch

@@ -1,61 +0,0 @@
-From ea2ca7ed3dbbf881ce08d80fe371f2aaf05011c3 Mon Sep 17 00:00:00 2001
-From: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Date: Thu, 18 Jan 2024 11:30:18 +0100
-Subject: [PATCH 04/41] Grow: Move update_tail assign to Grow_reshape()
-
-Due to e919fb0af245 ("FIX: Enable metadata updates for raid0") code
-can't enter super-intel.c:3415, resulting in checkpoint not being
-saved to metadata for second volume in matrix raid array.
-This results in checkpoint being stuck at last value for the
-first volume.
-
-Move st->update_tail to Grow_reshape() so it is assigned for each
-volume.
-
-Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Grow.c | 13 +++++++------
- 1 file changed, 7 insertions(+), 6 deletions(-)
-
-diff --git a/Grow.c b/Grow.c
-index f95dae82..5498e54f 100644
---- a/Grow.c
-+++ b/Grow.c
-@@ -2085,9 +2085,10 @@ int Grow_reshape(char *devname, int fd,
- 			if (!mdmon_running(st->container_devnm))
- 				start_mdmon(st->container_devnm);
- 			ping_monitor(container);
--			if (mdmon_running(st->container_devnm) &&
--					st->update_tail == NULL)
--				st->update_tail = &st->updates;
-+			if (mdmon_running(st->container_devnm) == false) {
-+				pr_err("No mdmon found. Grow cannot continue.\n");
-+				goto release;
-+			}
- 		}
- 
- 		if (s->size == MAX_SIZE)
-@@ -3048,6 +3049,8 @@ static int reshape_array(char *container, int fd, char *devname,
- 		dprintf("Cannot get array information.\n");
- 		goto release;
- 	}
-+	if (st->update_tail == NULL)
-+		st->update_tail = &st->updates;
- 	if (array.level == 0 && info->component_size == 0) {
- 		get_dev_size(fd, NULL, &array_size);
- 		info->component_size = array_size / array.raid_disks;
-@@ -5152,9 +5155,7 @@ int Grow_continue_command(char *devname, int fd,
- 			start_mdmon(container);
- 		ping_monitor(container);
- 
--		if (mdmon_running(container))
--			st->update_tail = &st->updates;
--		else {
-+		if (mdmon_running(container) == false) {
- 			pr_err("No mdmon found. Grow cannot continue.\n");
- 			ret_val = 1;
- 			goto Grow_continue_command_exit;
--- 
-2.40.1
-

0005-Add-understanding-output-section-in-man.patch

@@ -1,56 +0,0 @@
-From 37eeae381a8ed07a1fabb64184fe45d95a861496 Mon Sep 17 00:00:00 2001
-From: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Date: Thu, 18 Jan 2024 11:30:19 +0100
-Subject: [PATCH 05/41] Add understanding output section in man
-
-Add new section in man for explaining mdadm outputs.
-Describe checkpoint entry.
-
-Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- mdadm.8.in | 21 ++++++++++++++++++++-
- 1 file changed, 20 insertions(+), 1 deletion(-)
-
-diff --git a/mdadm.8.in b/mdadm.8.in
-index 96a4a08e..9ba66825 100644
---- a/mdadm.8.in
-+++ b/mdadm.8.in
-@@ -3179,7 +3179,7 @@ environment.  This can be useful for testing or for disaster
- recovery.  You should be aware that interoperability may be
- compromised by setting this value.
- 
--These change can also be suppressed by adding 
-+These change can also be suppressed by adding
- .B mdadm.imsm.test=1
- to the kernel command line. This makes it easy to test IMSM
- code in a virtual machine that doesn't have IMSM virtual hardware.
-@@ -3454,6 +3454,25 @@ is any string.  These names are supported by
- since version 3.3 provided they are enabled in
- .IR mdadm.conf .
- 
-+.SH UNDERSTANDING OUTPUT
-+
-+.TP
-+EXAMINE
-+
-+.TP
-+.B checkpoint
-+Checkpoint value is reported when array is performing some action including
-+resync, recovery or reshape. Checkpoints allow resuming action from certain
-+point if it was interrupted.
-+
-+Checkpoint is reported as combination of two values: current migration unit
-+and number of blocks per unit. By multiplying those values and dividing by
-+array size checkpoint progress percentage can be obtained in relation to
-+current progress reported in /proc/mdstat. Checkpoint is also related to (and
-+sometimes based on) sysfs entry sync_completed but depending on action units
-+may differ. Even if units are the same, it should not be expected that
-+checkpoint and sync_completed will be exact match nor updated simultaneously.
-+
- .SH NOTE
- .I mdadm
- was previously known as
--- 
-2.40.1
-

0006-Create-add_disk_to_super-fix-resource-leak.patch

@@ -1,48 +0,0 @@
-From b8f5523a795b8f7e56dfbc139ce7f64728b67726 Mon Sep 17 00:00:00 2001
-From: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Date: Tue, 20 Feb 2024 11:56:07 +0100
-Subject: [PATCH 06/41] Create: add_disk_to_super() fix resource leak
-
-Fixes resource leak in add_disk_to_super().
-
-Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Create.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
-diff --git a/Create.c b/Create.c
-index 8082f54a..7e9170b6 100644
---- a/Create.c
-+++ b/Create.c
-@@ -279,8 +279,10 @@ static int add_disk_to_super(int mdfd, struct shape *s, struct context *c,
- 			       dv->devname);
- 			return 1;
- 		}
--		if (!fstat_is_blkdev(fd, dv->devname, &rdev))
-+		if (!fstat_is_blkdev(fd, dv->devname, &rdev)) {
-+			close(fd);
- 			return 1;
-+		}
- 		info->disk.major = major(rdev);
- 		info->disk.minor = minor(rdev);
- 	}
-@@ -289,6 +291,7 @@ static int add_disk_to_super(int mdfd, struct shape *s, struct context *c,
- 	if (st->ss->add_to_super(st, &info->disk, fd, dv->devname,
- 				 dv->data_offset)) {
- 		ioctl(mdfd, STOP_ARRAY, NULL);
-+		close(fd);
- 		return 1;
- 	}
- 	st->ss->getinfo_super(st, info, NULL);
-@@ -297,6 +300,7 @@ static int add_disk_to_super(int mdfd, struct shape *s, struct context *c,
- 		*zero_pid = write_zeroes_fork(fd, s, st, dv);
- 		if (*zero_pid <= 0) {
- 			ioctl(mdfd, STOP_ARRAY, NULL);
-+			close(fd);
- 			return 1;
- 		}
- 	}
--- 
-2.40.1
-

0007-mdadm-signal_s-init-variables.patch

@@ -1,35 +0,0 @@
-From 38cb95dd28fa790ae6d90b169f1fd2b1d09a02f2 Mon Sep 17 00:00:00 2001
-From: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Date: Tue, 20 Feb 2024 11:56:08 +0100
-Subject: [PATCH 07/41] mdadm: signal_s() init variables
-
-Init sigaction structs in signal_s().
-This approach might throw warnings for GCC 4.x and lower.
-
-Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- mdadm.h | 5 ++---
- 1 file changed, 2 insertions(+), 3 deletions(-)
-
-diff --git a/mdadm.h b/mdadm.h
-index 1f28b3e7..75c887e4 100644
---- a/mdadm.h
-+++ b/mdadm.h
-@@ -1856,11 +1856,10 @@ static inline char *to_subarray(struct mdstat_ent *ent, char *container)
-  */
- static inline sighandler_t signal_s(int sig, sighandler_t handler)
- {
--	struct sigaction new_act;
--	struct sigaction old_act;
-+	struct sigaction new_act = {0};
-+	struct sigaction old_act = {0};
- 
- 	new_act.sa_handler = handler;
--	new_act.sa_flags = 0;
- 
- 	if (sigaction(sig, &new_act, &old_act) == 0)
- 		return old_act.sa_handler;
--- 
-2.40.1
-

0008-Monitor-open-file-before-check-in-check_one_sharer.patch

@@ -1,48 +0,0 @@
-From b7d7837128e90c8b496ebc3d88eda1a8ff477392 Mon Sep 17 00:00:00 2001
-From: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Date: Tue, 20 Feb 2024 11:56:09 +0100
-Subject: [PATCH 08/41] Monitor: open file before check in check_one_sharer()
-
-Open file before performing checks in check_one_sharer() to avoid
-file tampering.
-Remove redundant access check.
-
-Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Monitor.c | 13 +++++--------
- 1 file changed, 5 insertions(+), 8 deletions(-)
-
-diff --git a/Monitor.c b/Monitor.c
-index 824a69fc..7cee95d4 100644
---- a/Monitor.c
-+++ b/Monitor.c
-@@ -451,20 +451,17 @@ static int check_one_sharer(int scan)
- 		return 2;
- 	}
- 
--	if (access(AUTOREBUILD_PID_PATH, F_OK) != 0)
--		return 0;
--
--	if (!is_file(AUTOREBUILD_PID_PATH)) {
--		pr_err("%s is not a regular file.\n", AUTOREBUILD_PID_PATH);
--		return 2;
--	}
--
- 	fp = fopen(AUTOREBUILD_PID_PATH, "r");
- 	if (!fp) {
- 		pr_err("Cannot open %s file.\n", AUTOREBUILD_PID_PATH);
- 		return 2;
- 	}
- 
-+	if (!is_file(AUTOREBUILD_PID_PATH)) {
-+		pr_err("%s is not a regular file.\n", AUTOREBUILD_PID_PATH);
-+		return 2;
-+	}
-+
- 	if (fscanf(fp, "%d", &pid) != 1) {
- 		pr_err("Cannot read pid from %s file.\n", AUTOREBUILD_PID_PATH);
- 		fclose(fp);
--- 
-2.40.1
-

0009-Grow-remove-dead-condition-in-Grow_reshape.patch

@@ -1,34 +0,0 @@
-From e44d13f466e30c018887cd5aaf1212ed9f510813 Mon Sep 17 00:00:00 2001
-From: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Date: Tue, 20 Feb 2024 11:56:10 +0100
-Subject: [PATCH 09/41] Grow: remove dead condition in Grow_reshape()
-
-Remove dead "if" condition from Grow_reshape(). Sysfs read check is
-performed earlier in the code.
-
-Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Grow.c | 6 +-----
- 1 file changed, 1 insertion(+), 5 deletions(-)
-
-diff --git a/Grow.c b/Grow.c
-index 5498e54f..c69a342d 100644
---- a/Grow.c
-+++ b/Grow.c
-@@ -2098,11 +2098,7 @@ int Grow_reshape(char *devname, int fd,
- 			/* got truncated to 32bit, write to
- 			 * component_size instead
- 			 */
--			if (sra)
--				rv = sysfs_set_num(sra, NULL,
--						   "component_size", s->size);
--			else
--				rv = -1;
-+			rv = sysfs_set_num(sra, NULL, "component_size", s->size);
- 		} else {
- 			rv = md_set_array_info(fd, &array);
- 
--- 
-2.40.1
-

0010-super1-check-fd-before-passing-to-get_dev_size-in-ad.patch

@@ -1,34 +0,0 @@
-From 7ccf947eb595c1bb729c32ba18ce171dada76a68 Mon Sep 17 00:00:00 2001
-From: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Date: Tue, 20 Feb 2024 11:56:11 +0100
-Subject: [PATCH 10/41] super1: check fd before passing to get_dev_size() in
- add_to_super1()
-
-Check if file descriptor is valid before passing it to get_dev_size() in
-add_to_super().
-
-Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- super1.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
-diff --git a/super1.c b/super1.c
-index 871d19f0..5439b7bb 100644
---- a/super1.c
-+++ b/super1.c
-@@ -1752,7 +1752,10 @@ static int add_to_super1(struct supertype *st, mdu_disk_info_t *dk,
- 	di->devname = devname;
- 	di->disk = *dk;
- 	di->data_offset = data_offset;
--	get_dev_size(fd, NULL, &di->dev_size);
-+
-+	if (is_fd_valid(fd))
-+		get_dev_size(fd, NULL, &di->dev_size);
-+
- 	di->next = NULL;
- 	*dip = di;
- 
--- 
-2.40.1
-

0011-mdmon-refactor-md-device-name-check-in-main.patch

@@ -1,66 +0,0 @@
-From c8772da4b53307546a9a374507bcec3398fc82c4 Mon Sep 17 00:00:00 2001
-From: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Date: Tue, 20 Feb 2024 11:56:12 +0100
-Subject: [PATCH 11/41] mdmon: refactor md device name check in main()
-
-Refactor mdmon main function to verify if fd is valid prior to checking
-device name. This is due to static code analysis complaining after
-change b938519e7719 ("util: remove obsolete code from get_md_name").
-
-Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- mdmon.c | 21 +++++++++++----------
- 1 file changed, 11 insertions(+), 10 deletions(-)
-
-diff --git a/mdmon.c b/mdmon.c
-index a2038fe6..5fdb5cdb 100644
---- a/mdmon.c
-+++ b/mdmon.c
-@@ -302,12 +302,12 @@ static int mdmon(char *devnm, int must_fork, int takeover);
- int main(int argc, char *argv[])
- {
- 	char *container_name = NULL;
--	char *devnm = NULL;
- 	int status = 0;
- 	int opt;
- 	int all = 0;
- 	int takeover = 0;
- 	int dofork = 1;
-+	int mdfd = -1;
- 	bool help = false;
- 	static struct option options[] = {
- 		{"all", 0, NULL, 'a'},
-@@ -410,19 +410,20 @@ int main(int argc, char *argv[])
- 		free_mdstat(mdstat);
- 
- 		return status;
--	} else {
--		int mdfd = open_mddev(container_name, 0);
--		devnm = fd2devnm(mdfd);
-+	}
-+
-+	mdfd = open_mddev(container_name, 0);
-+	if (is_fd_valid(mdfd)) {
-+		char *devnm = fd2devnm(mdfd);
- 
- 		close(mdfd);
--	}
- 
--	if (!devnm) {
--		pr_err("%s is not a valid md device name\n",
--			container_name);
--		return 1;
-+		if (devnm)
-+			return mdmon(devnm, dofork && do_fork(), takeover);
- 	}
--	return mdmon(devnm, dofork && do_fork(), takeover);
-+
-+	pr_err("%s is not a valid md device name\n", container_name);
-+	return 1;
- }
- 
- static int mdmon(char *devnm, int must_fork, int takeover)
--- 
-2.40.1
-

0012-test-run-tests-on-system-level-mdadm.patch

@@ -1,138 +0,0 @@
-From 4c12714d1ca06533fe7a887966df2558fd2f96b2 Mon Sep 17 00:00:00 2001
-From: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Date: Tue, 20 Feb 2024 17:04:44 +0100
-Subject: [PATCH 12/41] test: run tests on system level mdadm
-
-The tests run with MDADM_NO_SYSTEMCTL flag by default, however it has
-no effect on udev. In case of external metadata, even if flag is set,
-udev will trigger systemd to launch mdmon.
-
-This commit changes test execution level, so the tests are run on system
-level mdadm, meaning local build must be installed prior to running
-tests.
-
-Add warning that the tests are run on system level mdadm and local
-build must be installed first.
-
-Do not call mdadm with "quiet" as it makes it not display critical
-messages necessary for debug.
-
-Remove forcing speed_limit and add restoring system speed_limit_max
-after test execution.
-
-Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- test          | 27 ++++++++++++++++++---------
- tests/func.sh |  1 -
- 2 files changed, 18 insertions(+), 10 deletions(-)
-
-diff --git a/test b/test
-index 49a36c3b..338c2db4 100755
---- a/test
-+++ b/test
-@@ -1,11 +1,12 @@
- #!/bin/bash
- #
- # run test suite for mdadm
--mdadm=$PWD/mdadm
-+mdadm=`which mdadm`
- targetdir="/var/tmp"
- logdir="$targetdir"
- config=/tmp/mdadm.conf
- testdir=$PWD/tests
-+system_speed_limit=`cat /proc/sys/dev/raid/speed_limit_max`
- devlist=
- 
- savelogs=0
-@@ -20,9 +21,6 @@ DEVTYPE=loop
- INTEGRITY=yes
- LVM_VOLGROUP=mdtest
- 
--# make sure to test local mdmon, not system one
--export MDADM_NO_SYSTEMCTL=1
--
- # assume md0, md1, md2 exist in /dev
- md0=/dev/md0
- md1=/dev/md1
-@@ -41,7 +39,10 @@ ctrl_c() {
- 	ctrl_c_error=1
- }
- 
--# mdadm always adds --quiet, and we want to see any unexpected messages
-+restore_system_speed_limit() {
-+	echo $system_speed_limit > /proc/sys/dev/raid/speed_limit_max
-+}
-+
- mdadm() {
- 	rm -f $targetdir/stderr
- 	case $* in
-@@ -63,10 +64,10 @@ mdadm() {
- 					$mdadm --zero $args > /dev/null
- 			}
- 		done
--		$mdadm 2> $targetdir/stderr --quiet "$@" --auto=yes
-+		$mdadm 2> $targetdir/stderr "$@" --auto=yes
- 		;;
- 	* )
--		$mdadm 2> $targetdir/stderr --quiet "$@"
-+		$mdadm 2> $targetdir/stderr "$@"
- 		;;
- 	esac
- 	rv=$?
-@@ -99,8 +100,6 @@ do_test() {
- 		fi
- 
- 		rm -f $targetdir/stderr
--		# this might have been reset: restore the default.
--		echo 2000 > /proc/sys/dev/raid/speed_limit_max
- 		do_clean
- 		# source script in a subshell, so it has access to our
- 		# namespace, but cannot change it.
-@@ -122,6 +121,7 @@ do_test() {
- 				echo "  (KNOWN BROKEN TEST: $_broken_msg)"
- 			fi
- 		fi
-+		restore_system_speed_limit
- 		[ "$savelogs" == "1" ] &&
- 			mv -f $targetdir/log $logdir/$_basename.log
- 		[ "$ctrl_c_error" == "1" ] && exit 1
-@@ -299,7 +299,15 @@ parse_args() {
- 	done
- }
- 
-+print_warning() {
-+	cat <<-EOF
-+	Warning! Tests are performed on system level mdadm!
-+	If you want to test local build, you need to install it first!
-+	EOF
-+}
-+
- main() {
-+	print_warning
- 	do_setup
- 
- 	echo "Testing on linux-$(uname -r) kernel"
-@@ -329,6 +337,7 @@ main() {
- 			break
- 		fi
- 	done
-+
- 	exit 0
- }
- 
-diff --git a/tests/func.sh b/tests/func.sh
-index 1c1a28a2..b474442b 100644
---- a/tests/func.sh
-+++ b/tests/func.sh
-@@ -213,7 +213,6 @@ do_setup() {
- 	path1=$dev7
- 	ulimit -c unlimited
- 	[ -f /proc/mdstat ] || modprobe md_mod
--	echo 2000 > /proc/sys/dev/raid/speed_limit_max
- 	echo 0 > /sys/module/md_mod/parameters/start_ro
- }
- 
--- 
-2.40.1
-

0013-Monitor-Allow-no-PID-in-check_one_sharer.patch

@@ -1,43 +0,0 @@
-From 3c3ddeeccc1eb4accb62ce9920de430a564be806 Mon Sep 17 00:00:00 2001
-From: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Date: Wed, 28 Feb 2024 16:37:20 +0100
-Subject: [PATCH 13/41] Monitor: Allow no PID in check_one_sharer()
-
-Commit 5fb5479ad100 ("Monitor: open file before check in
-check_one_sharer()") introduced a regression that prohibits monitor
-from starting if PID file does not exist.
-
-Add check for no PID file.
-Add missing fclose().
-
-Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Monitor.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/Monitor.c b/Monitor.c
-index 7cee95d4..9be2b528 100644
---- a/Monitor.c
-+++ b/Monitor.c
-@@ -453,12 +453,17 @@ static int check_one_sharer(int scan)
- 
- 	fp = fopen(AUTOREBUILD_PID_PATH, "r");
- 	if (!fp) {
-+		/* PID file does not exist */
-+		if (errno == ENOENT)
-+			return 0;
-+
- 		pr_err("Cannot open %s file.\n", AUTOREBUILD_PID_PATH);
- 		return 2;
- 	}
- 
- 	if (!is_file(AUTOREBUILD_PID_PATH)) {
- 		pr_err("%s is not a regular file.\n", AUTOREBUILD_PID_PATH);
-+		fclose(fp);
- 		return 2;
- 	}
- 
--- 
-2.40.1
-

0014-super-intel-respect-IMSM_DEVNAME_AS_SERIAL-flag.patch

@@ -1,47 +0,0 @@
-From d1cd231ae41d98b2555dbff08d0c79876b5059fe Mon Sep 17 00:00:00 2001
-From: Kinga Tanska <kinga.tanska@intel.com>
-Date: Tue, 27 Feb 2024 07:36:39 +0100
-Subject: [PATCH 14/41] super-intel: respect IMSM_DEVNAME_AS_SERIAL flag
-
-IMSM_DEVNAME_AS_SERIAL flag was respected only when searching
-serial using nvme or scsi device wasn't successful. This
-flag shall be applied first, to have user settings with
-the highest priority.
-
-Signed-off-by: Kinga Tanska <kinga.tanska@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- super-intel.c | 12 ++++++------
- 1 file changed, 6 insertions(+), 6 deletions(-)
-
-diff --git a/super-intel.c b/super-intel.c
-index e61f3f6f..4babec9f 100644
---- a/super-intel.c
-+++ b/super-intel.c
-@@ -4174,17 +4174,17 @@ static int imsm_read_serial(int fd, char *devname,
- 
- 	memset(buf, 0, sizeof(buf));
- 
-+	if (check_env("IMSM_DEVNAME_AS_SERIAL")) {
-+		memset(serial, 0, serial_buf_len);
-+		fd2devname(fd, (char *) serial);
-+		return 0;
-+	}
-+
- 	rv = nvme_get_serial(fd, buf, sizeof(buf));
- 
- 	if (rv)
- 		rv = scsi_get_serial(fd, buf, sizeof(buf));
- 
--	if (rv && check_env("IMSM_DEVNAME_AS_SERIAL")) {
--		memset(serial, 0, MAX_RAID_SERIAL_LEN);
--		fd2devname(fd, (char *) serial);
--		return 0;
--	}
--
- 	if (rv != 0) {
- 		if (devname)
- 			pr_err("Failed to retrieve serial for %s\n",
--- 
-2.40.1
-

0015-mdadm-remove-TODO.patch

@@ -1,236 +0,0 @@
-From a944da4e1a56cd926e6b21f5aaebc13198265419 Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Fri, 23 Feb 2024 15:51:42 +0100
-Subject: [PATCH 15/41] mdadm: remove TODO
-
-This file is not updated in 16 years.
-No reasons to keep it. Remove it.
-
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- TODO | 213 -----------------------------------------------------------
- 1 file changed, 213 deletions(-)
- delete mode 100644 TODO
-
-diff --git a/TODO b/TODO
-deleted file mode 100644
-index 279d20db..00000000
---- a/TODO
-+++ /dev/null
-@@ -1,213 +0,0 @@
-- - add 'name' field to metadata type and use it.
-- - use validate_geometry more
-- - metadata should be able to check/reject bitmap stuff.
--
--DDF:
--  Three new metadata types:
--    ddf - used only to create a container.
--    ddf-bvd - used to create an array in a container
--    ddf-svd - used to create a secondary array from bvds.
--
--  Usage:
--    mdadm -C /dev/ddf1 /dev/sd[abcdef]
--    mdadm -C /dev/md1 -e ddf /dev/sd[a-f]
--    mdadm -C /dev/md1 -l container /dev/sd[a-f]
--
--        Each of these create a new ddf container using all those
--	devices.  The name 'ddf*' signals that ddf metadata should be used.
--	'-e ddf' only supports one level - 'container'.  'container' is only
--	supported by ddf.
--
--    mdadm -C /dev/md1 -l0 -n4 /dev/ddf1 # or maybe not ???
--    mdadm -C /dev/md1 -l1 -n2 /dev/sda /dev/sdb
--	If exactly one device is given, and it is a container, we select
--	devices from that container.
--	If devices are given that are already in use, they must be in use by
--	a container, and the array is created in the container.
--	If devices given are bvds, we slip under the hood to make
--	  the svd arrays.
--
--    mdadm -A /dev/ddf ......
--	base drives make a container.  Anything in that container is started
--	 auto-read-only.
--	 if /dev/ddf is already assembled, we assemble bvds and svds inside it.
--
--
--2005-dec-20
--  Want an incremental assembly mode to work nicely with udev.
--  Core usage would be something like
--       mdadm --incr-assemble /dev/newdevice
--  This would
--     - examine the device to determine  uuid etc.
--     - look for a match in /etc/mdadm.conf, abort if not found
--     - find that device and collect current contents
--     - perform an 'assemble' analysis to make sure we have the best set of devices.
--     - remove or add devices as appropriate
--     - possibly start the array if it was complete
--
--   Other usages could involve
--     - specify which array to auto-add to.
--       This requires an existing array for uuid matching... is there any point?
--
--     -
--
--
--2004-june-02
--  * Don't print 'errors' flag, it is meaningless. DONE
--  * Handle new superblock format
--  * create device file on demand, particularly partitionable devices. DONE
--      BUT figure a way to create the partition devices.
--              auto=partN
--  * Use Event: interface to listen for events. DONE, untested
--  * Make sure mdadm -As can assemble multi-level RAIDs ok.
--  * --build to build raid1 or multipath arrays 
--       clean or not ???
--  
------------------------------------------------------------------------------
--* mdadm --monitor to monitor failed multipath paths and re-instate them.
--
--* Maybe make "--help" fit in 80x24 and have a --long-help with more info. DONE
--
--
--* maybe "missing" instead of <bold>missing</> in doco DONE
--* possibly wait for resync to start, or even finish while assembling.- NO
--
--* -Db should have a devices= entry if possible. - DONE
--* when assembling multipath arrays, ignore any error indicators. - DONE
--* rationalise --monitor usage:
--     mdadm --monitor
--  doesn't do as expected. DONE
--
--* --assemble could have a --update option. - DONE
--  following word can be:
--	sparc2.2
--	super-minor
--
--* mdadm /dev/md11, where md11 is raid0 can segfault, particularly when looking in the 
--   [UU_UUU] string ... which doesn't exist !
--It should be more sensible.  DONE
--
--Example:
--
--from  Raimund Sacherer <raimund.sacherer@ngit.at>
--
--mke2fs -m0 -q /dev/ram1 300
--mount -n -t ext2 /dev/ram1 /tmp
--echo DEVICE /dev/[sh]* >> /tmp/mdadm.conf
--mdadm -Esb /dev/[sh]* 2>/dev/null >> /tmp/mdadm.conf
--mdadm -ARsc /tmp/mdadm.conf
--umount /tmp
--
--
--?? Allow -S /dev/md? - current complains subsequent not a/d/r - DONE
--
--* new "Query" mode to subsume --detail and --examine.
--   --query or -Q, takes a device and tells if it is an MD device,
--   and also tells in a raid superblock is found. 
-- DONE
--
--* write mdstat.c to parse /proc/mdstat file
--   Build list of arrays:  name, rebuild-percent
--  DONE
--
--* parse /proc/partitions and map major/minor into /dev/* names,
--  and use that for default DEVICE list ????
--
--* --detail --scan to read /proc/mdstat, and then iterate over these,
--    but assume --brief.  --verbose can override
--    check each subdevice to see if it is in conf_get_devs.
--    Warn if not.
--  DONE, but don't warn yet...
--
--* Support multipath ... maybe...
--  maybe DONE
--
--* --follow to syslog 
--
--* --follow to move spares around DONE
--
--* --follow to notice other events: DONE
--     rebuild started
--     spare activated
--     spare removed
--     spare added
--
--------------------------------------
--- --examine --scan scans all drives and build an mdadm.conf file DONE
--
--- check superblock checksum in examine DONE
--- report "chunk" or "rounding" depending on raid level DONE
--- report "linear" instead of "-1" for raid level DONE
--- decode ayout depending on raid level DONE
--- --verbose and --force flags. DONE
--
--- set md_minor, *_disks for Create  - DONE
--- for create raid5, how to choose between 
--   all working, but not insync
--   one missing, one spare, insync  DONE (--force)
--- and for raid1 - some failed drives...  (missing)
--
--- when RUN_ARRAY, make sure *_disks counts are right
--
--- get --detail to extract extra stuff from superblock,
--   like uuid  DONE
--- --detail --brief to give a config file line DONE
--- parse config file. DONE
--- test...
--
--- when --assemble --scan, if an underlying device is an md device, 
--  then try to assemble that device first.
--
--
--- mdadm -S /dev/md0 /dev/md1 gives internal error FIXED
--
--- mdadm --detail --scan print summary of what it can find? DONE
--
--
-----------
--Assemble doesn't add spares. - DONE
--Create to allow "missing" name for devices.
--Create to accept "--force" for do exactly what is requested
--- get Assemble to upgrade devices if force flag.
--ARRAY lines in config file to have super_minor=n
--ARRAY lines in config file to have device=pattern, and only accept
--   those devices
--   If UUID given, insist on that
--   If not, but super_minor given, require all found with that minor
--    to have same uuid
--   If only device given, all valid supers on those devices must have 
--    same uuid
--allow /dev/mdX as first argument before any options
--Possible --dry-run option for create and assemble--force
--
--Assemble to check that all devices mentioned in superblock
--  are present.
--
--New mode: --Monitor (or --Follow)
--  Periodically check status of all arrays (listed in config file).
--  Log every event and apparent cause - or differences
--  Email and alert - or run a program - for important events
--  Move spares around if necessary.
--
--  An Array line can have a spare-group= field that indicates that
--   the array shares spares with other arrays with the same
--   spare-group name.
--   If an array has a failed and no spares, then check all other
--     arrays in the spare group.  If one has no failures and a spare,
--     then consider that spare.
--    Choose the smallest considered spare that is large enough.
--    If there is one, then hot-remove it from it's home, and
--    hot-add it to the array in question.
--
--  --mail-to address  
--  --alert-handler program
--  
--  Will also extract information from /proc/mdstat if present,
--  and consider 20% marks in rebuild as events.
--
--  Events are:
--     drive fails  - causes mail to be sent
--     rebuild started
--     spare activated
--     spare removed
--     spare added
--- 
-2.40.1
-

0016-mdadm-remove-makedist.patch

@@ -1,119 +0,0 @@
-From 84d5e05d6fa6bbe6f4a3bdbdb1165dcc463b5207 Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Fri, 23 Feb 2024 15:51:43 +0100
-Subject: [PATCH 16/41] mdadm: remove makedist
-
-Archives are generated kernel.org automation, no need to submit
-them manually, so remove legacy solution.
-
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- makedist | 96 --------------------------------------------------------
- 1 file changed, 96 deletions(-)
- delete mode 100755 makedist
-
-diff --git a/makedist b/makedist
-deleted file mode 100755
-index 0c4b39eb..00000000
---- a/makedist
-+++ /dev/null
-@@ -1,96 +0,0 @@
--#!/bin/sh
--# avoid silly sorting
--export LANG=C
--arg=$1
--target=~/public_html/source/mdadm
--if [ " $arg" = " test" ]
--then
--  target=/tmp/mdadm-test
--  rm -rf $target
--  mkdir -p $target
--fi
--if [ -d $target ]
--then :
--else echo $target is not a directory
--     exit 2
--fi
--set `grep '^#define VERSION' ReadMe.c `
--version=`echo $3 | sed -e 's/"//g'`
--grep "^.TH MDADM 8 .. v$version" mdadm.8.in > /dev/null 2>&1 ||
-- {
--   echo mdadm.8.in does not mention version $version.
--   exit 1
-- }
--grep "^.TH MDMON 8 .. v$version" mdmon.8 > /dev/null 2>&1 ||
-- {
--   echo mdmon.8 does not mention version $version.
--   exit 1
-- }
--rpmv=`echo $version | tr - _`
--grep "^Version: *$rpmv$" mdadm.spec > /dev/null 2>&1 ||
-- {
--   echo mdadm.spec does not mention version $version.
--   exit 1
-- }
--if [ -f ANNOUNCE-$version ]
--then :
--else
--   echo ANNOUNCE-$version does not exist
--   exit 1
--fi
--if grep "^ANNOUNCE-$version\$" inventory
--then :
--else { cat inventory ; echo ANNOUNCE-$version ; } | sort -o inventory
--fi
--
--echo version = $version
--base=mdadm-$rpmv.tar.gz
--if [ " $arg" != " diff" ]
--then
--  if [ -f $target/$base ]
--  then
--    echo $target/$base exists.
--    exit 1
--  fi
--  trap "rm $target/$base; exit" 1 2 3
--  git archive --prefix=mdadm-$rpmv/ HEAD | gzip --best > $target/$base
--  chmod a+r $target/$base
--  ls -l $target/$base
--  if tar tzf $target/$base | sed 's,[^/]*/,,' | sort | diff -u inventory -
--  then : correct files found
--  else echo "Extra files, or inventory is out-of-date"
--       rm $target/$base
--       exit 1
--  fi
--  rpmbuild -ta $target/$base || exit 1
--  find ~/rpmbuild/RPMS -name "*mdadm-$version-*" \
--     -exec cp {} $target/RPM \;
--  cp ANNOUNCE-$version $target/ANNOUNCE
--  cp ChangeLog $target/ChangeLog
--  if [ " $arg" != " test" ]
--  then
--    echo -n "Confirm signing this release? "
--    read a
--    if [ " $a" != " y" ]; then echo OK - bye. ; exit 1; fi
--    if zcat $target/$base | gpg -ba > $target/$base.sign && gpg -ba $target/ANNOUNCE
--    then
--      kup put $target/$base  $target/$base.sign \
--	  /pub/linux/utils/raid/mdadm/mdadm-$version.tar.gz
--      kup put $target/ANNOUNCE $target/ANNOUNCE.asc /pub/linux/utils/raid/mdadm/ANNOUNCE
--    else
--      echo signing failed
--      exit 1
--    fi
--  fi
--else
--  if [ ! -f $target/$base ]
--  then
--    echo $target/$base does not exist.
--    exit 1
--  fi
--  ( cd .. ; ln -s mdadm.v2 mdadm-$version ; tar chf - --exclude=.git --exclude="TAGS" --exclude='*,v' --exclude='*~' --exclude='*.o' --exclude mdadm --exclude=mdadm'.[^ch0-9]' --exclude=RCS mdadm-$version ; rm mdadm-$version ) | gzip --best > /var/tmp/mdadm-new.tgz
--  mkdir /var/tmp/mdadm-old ; zcat $target/$base | ( cd /var/tmp/mdadm-old ; tar xf - )
--  mkdir /var/tmp/mdadm-new ; zcat /var/tmp/mdadm-new.tgz | ( cd /var/tmp/mdadm-new ; tar xf - )
--  diff -ru /var/tmp/mdadm-old /var/tmp/mdadm-new
--  rm -rf /var/tmp/mdadm-old /var/tmp/mdadm-new /var/tmp/mdadm-new.tgz
--fi
--- 
-2.40.1
-

0017-mdadm-remove-mdadm.spec.patch

@@ -1,69 +0,0 @@
-From 9cdcc193cec92c624841d5b70f1b96daafdc4314 Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Fri, 23 Feb 2024 15:51:44 +0100
-Subject: [PATCH 17/41] mdadm: remove mdadm.spec
-
-This file is outdated, distributions have their own specs.
-
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- mdadm.spec | 47 -----------------------------------------------
- 1 file changed, 47 deletions(-)
- delete mode 100644 mdadm.spec
-
-diff --git a/mdadm.spec b/mdadm.spec
-deleted file mode 100644
-index 12e7859a..00000000
---- a/mdadm.spec
-+++ /dev/null
-@@ -1,47 +0,0 @@
--Summary:     mdadm is used for controlling Linux md devices (aka RAID arrays)
--Name:        mdadm
--Version:     4.3
--Release:     1
--Source:      https://www.kernel.org/pub/linux/utils/raid/mdadm/mdadm-%{version}.tar.gz
--URL:         https://neil.brown.name/blog/mdadm
--License:     GPL
--Group:       Utilities/System
--BuildRoot:   %{_tmppath}/%{name}-root
--Obsoletes:   mdctl
--
--%description
--mdadm is a program that can be used to create, manage, and monitor
--Linux MD (Software RAID) devices.
--
--%prep
--%setup -q
--# we want to install in /sbin, not /usr/sbin...
--%define _exec_prefix %{nil}
--
--%build
--# This is a debatable issue. The author of this RPM spec file feels that
--# people who install RPMs (especially given that the default RPM options
--# will strip the binary) are not going to be running gdb against the
--# program.
--make CXFLAGS="$RPM_OPT_FLAGS" SYSCONFDIR="%{_sysconfdir}"
--
--%install
--make DESTDIR=$RPM_BUILD_ROOT MANDIR=%{_mandir} BINDIR=%{_sbindir} install
--install -D -m644 mdadm.conf-example $RPM_BUILD_ROOT/%{_sysconfdir}/mdadm.conf
--
--%clean
--rm -rf $RPM_BUILD_ROOT
--
--%files
--%defattr(-,root,root)
--%doc TODO ChangeLog mdadm.conf-example COPYING
--%{_sbindir}/mdadm
--%{_sbindir}/mdmon
--/usr/lib/udev/rules.d/01-md-raid-creating.rules
--/usr/lib/udev/rules.d/63-md-raid-arrays.rules
--/usr/lib/udev/rules.d/64-md-raid-assembly.rules
--/usr/lib/udev/rules.d/69-md-clustered-confirm-device.rules
--%config(noreplace,missingok)/%{_sysconfdir}/mdadm.conf
--%{_mandir}/man*/md*
--
--%changelog
--- 
-2.40.1
-

0018-mdadm-remove-mkinitramfs-stuff.patch

@@ -1,209 +0,0 @@
-From 9282e1169f19676553a82dd49f780285a16e3b9a Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Fri, 23 Feb 2024 15:51:45 +0100
-Subject: [PATCH 18/41] mdadm: remove mkinitramfs stuff
-
-This script uses mdadm.static which is known to not be abandoned
-(probably not working) from years. Mdadm is integrated with dracut
-and mkinitramfs these days.
-
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- README.initramfs | 122 -----------------------------------------------
- mkinitramfs      |  55 ---------------------
- 2 files changed, 177 deletions(-)
- delete mode 100644 README.initramfs
- delete mode 100644 mkinitramfs
-
-diff --git a/README.initramfs b/README.initramfs
-deleted file mode 100644
-index c5fa6680..00000000
---- a/README.initramfs
-+++ /dev/null
-@@ -1,122 +0,0 @@
--Assembling md arrays at boot time.
-----------------------------------
--December 2005
--
--These notes apply to 2.6 kernels only and, in some cases,
--to 2.6.15 or later.
--
--Md arrays can be assembled at boot time using the 'autodetect' functionality
--which is triggered by storing components of an array in partitions of type
--'fd' - Linux Raid Autodetect.
--They can also be assembled by specifying the component devices in a
--kernel parameter such as
--  md=0,/dev/sda,/dev/sdb
--In this case, /dev/md0 will be assembled (because of the 0) from the listed
--devices.
--
--These mechanisms, while useful, do not provide complete functionality
--and are unlikely to be extended.  The preferred way to assemble md
--arrays at boot time is using 'mdadm'.  To assemble an array which
--contains the root filesystem, mdadm needs to be run before that
--filesystem is mounted, and so needs to be run from an initial-ram-fs.
--It is how this can work that is the primary focus of this document.
--
--It should be noted up front that only the array containing the root
--filesystem should be assembled from the initramfs.  Any other arrays
--should be assembled under the control of files on the main filesystem
--as this enhanced flexibility and maintainability.
--
--A minimal initramfs for assembling md arrays can be created using 3
--files and one directory.  These are:
--
--/bin           Directory
--/bin/mdadm     statically linked mdadm binary
--/bin/busybox   statically linked busybox binary
--/bin/sh        hard link to /bin/busybox
--/init          a shell script which call mdadm appropriately.
--
--An example init script is:
--
--==============================================
--#!/bin/sh
--
--echo 'Auto-assembling boot md array'
--mkdir /proc
--mount -t proc proc /proc
--if [ -n "$rootuuid" ]
--then arg=--uuid=$rootuuid
--elif [ -n "$mdminor" ]
--then arg=--super-minor=$mdminor
--else arg=--super-minor=0
--fi
--echo "Using $arg"
--mdadm -Acpartitions $arg --auto=part /dev/mda
--cd /
--mount /dev/mda1 /root ||  mount /dev/mda /root
--umount /proc
--cd /root
--exec chroot . /sbin/init < /dev/console > /dev/console 2>&1
--=============================================
--
--This could certainly be extended, or merged into a larger init script.
--Though tested and in production use, it is not presented here as
--"The Right Way" to do it, but as a useful example.
--Some key points are:
--
--  /proc needs to be mounted so that /proc/partitions can be accessed
--  by mdadm, and so that /proc/filesystems can be accessed by mount.
--
--  The uuid of the array can be passed in as a kernel parameter
--  (rootuuid).  As the kernel doesn't use this value, it is made available
--  in the environment for /init
--
--  If no uuid is given, we default to md0, (--super-minor=0) which is a
--  commonly used to store the root filesystem.  This may not work in
--  all situations.
--
--  We assemble the array as a partitionable array (/dev/mda) even if we
--  end up using the whole array.  There is no cost in using the partitionable
--  interface, and in this context it is simpler.
--
--  We try mounting both /dev/mda1 and /dev/mda as they are the most like
--  part of the array to contain the root filesystem.
--
--  The --auto flag is given to mdadm so that it will create /dev/md*
--  files automatically.  This is needed as /dev will not contain
--  and md files, and udev will not create them (as udev only created device
--  files after the device exists, and mdadm need the device file to create
--  the device).  Note that the created md files may not exist in /dev
--  of the mounted root filesystem.  This needs to be deal with separately
--  from mdadm - possibly using udev.
--
--  We do not need to create device files for the components which will
--  be assembled into /dev/mda.  mdadm finds the major/minor numbers from
--  /proc/partitions and creates a temporary /dev file if one doesn't already
--  exist.
--
--The script "mkinitramfs" which is included with the mdadm distribution
--can be used to create a minimal initramfs.  It creates a file called
--'init.cpio.gz' which can be specified as an 'initrd' to lilo or grub
--(or whatever boot loader is being used).
--
--
--
--
--Resume from an md array
-------------------------
--
--If you want to make use of the suspend-to-disk/resume functionality in Linux,
--and want to have swap on an md array, you will need to assemble the array
--before resume is possible.
--However, because the array is active in the resumed image, you do not want
--anything written to any drives during the resume process, such as superblock
--updates or array resync.
--
--This can be achieved in 2.6.15-rc1 and later kernels using the
--'start_readonly' module parameter.
--Simply include the command
--  echo 1 > /sys/module/md_mod/parameters/start_ro
--before assembling the array with 'mdadm'.
--You can then echo
--  9:0
--or whatever is appropriate to /sys/power/resume to trigger the resume.
-diff --git a/mkinitramfs b/mkinitramfs
-deleted file mode 100644
-index c6275ddb..00000000
---- a/mkinitramfs
-+++ /dev/null
-@@ -1,55 +0,0 @@
--#!/bin/sh
--
--# make sure we are being run in the right directory...
--if [ -f mkinitramfs ]
--then :
--else
--  echo >&2 mkinitramfs must be run from the mdadm source directory.
--  exit 1
--fi
--if [ -f /bin/busybox ]
--then : good, it exists
--  case `file /bin/busybox` in
--   *statically* ) : good ;;
--   * ) echo >&2 mkinitramfs: /bin/busybox is not statically linked: cannot proceed.
--       exit 1
--  esac
--else
--  echo >&2 "mkinitramfs: /bin/busybox doesn't exist - please install it statically linked."
--    exit 1
--fi
--
--rm -rf initramfs
--mkdir initramfs
--mkdir initramfs/bin
--make mdadm.static
--cp mdadm.static initramfs/bin/mdadm
--cp /bin/busybox initramfs/bin/busybox
--ln initramfs/bin/busybox initramfs/bin/sh
--cat <<- END > initramfs/init
--	#!/bin/sh
--
--	echo 'Auto-assembling boot md array'
--	mkdir /proc
--	mount -t proc proc /proc
--	if [ -n "$rootuuid" ]
--	then arg=--uuid=$rootuuid
--	elif [ -n "$mdminor" ]
--	then arg=--super-minor=$mdminor
--	else arg=--super-minor=0
--	fi
--	echo "Using $arg"
--	mdadm -Acpartitions $arg --auto=part /dev/mda
--	cd /
--	mount /dev/mda1 /root ||  mount /dev/mda /root
--	umount /proc
--	cd /root
--	exec chroot . /sbin/init < /dev/console > /dev/console 2>&1
--END
--chmod +x initramfs/init
--
--(cd initramfs
-- find init bin | cpio -o -H newc | gzip --best
--) > init.cpio.gz
--rm -rf initramfs
--ls -l init.cpio.gz
--- 
-2.40.1
-

0020-Detail-remove-duplicated-code.patch

@@ -1,75 +0,0 @@
-From 60c19530dd7cc6b38a75695a0a3d004bbe60d430 Mon Sep 17 00:00:00 2001
-From: Kinga Tanska <kinga.tanska@intel.com>
-Date: Tue, 27 Feb 2024 03:36:14 +0100
-Subject: [PATCH 20/41] Detail: remove duplicated code
-
-Remove duplicated code from Detail(), where MD_UUID and MD_DEVNAME
-are being set. Superblock is no longer required to print system
-properties. Now it tries to obtain map in two ways.
-
-Signed-off-by: Kinga Tanska <kinga.tanska@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Detail.c | 33 +++++++++++++--------------------
- 1 file changed, 13 insertions(+), 20 deletions(-)
-
-diff --git a/Detail.c b/Detail.c
-index aaa3dd6e..f23ec16f 100644
---- a/Detail.c
-+++ b/Detail.c
-@@ -226,6 +226,9 @@ int Detail(char *dev, struct context *c)
- 		str = map_num(pers, array.level);
- 
- 	if (c->export) {
-+		char nbuf[64];
-+		struct map_ent *mp = NULL, *map = NULL;
-+
- 		if (array.raid_disks) {
- 			if (str)
- 				printf("MD_LEVEL=%s\n", str);
-@@ -247,32 +250,22 @@ int Detail(char *dev, struct context *c)
- 				       array.minor_version);
- 		}
- 
--		if (st && st->sb && info) {
--			char nbuf[64];
--			struct map_ent *mp, *map = NULL;
--
--			fname_from_uuid(st, info, nbuf, ':');
--			printf("MD_UUID=%s\n", nbuf + 5);
-+		if (info)
- 			mp = map_by_uuid(&map, info->uuid);
-+		if (!mp)
-+			mp = map_by_devnm(&map, fd2devnm(fd));
- 
--			if (mp && mp->path && strncmp(mp->path, DEV_MD_DIR, DEV_MD_DIR_LEN) == 0)
-+		if (mp) {
-+			__fname_from_uuid(mp->uuid, 0, nbuf, ':');
-+			printf("MD_UUID=%s\n", nbuf + 5);
-+			if (mp->path && strncmp(mp->path, DEV_MD_DIR, DEV_MD_DIR_LEN) == 0)
- 				printf("MD_DEVNAME=%s\n", mp->path + DEV_MD_DIR_LEN);
-+		}
- 
-+		map_free(map);
-+		if (st && st->sb) {
- 			if (st->ss->export_detail_super)
- 				st->ss->export_detail_super(st);
--			map_free(map);
--		} else {
--			struct map_ent *mp, *map = NULL;
--			char nbuf[64];
--			mp = map_by_devnm(&map, fd2devnm(fd));
--			if (mp) {
--				__fname_from_uuid(mp->uuid, 0, nbuf, ':');
--				printf("MD_UUID=%s\n", nbuf+5);
--			}
--			if (mp && mp->path && strncmp(mp->path, DEV_MD_DIR, DEV_MD_DIR_LEN) == 0)
--				printf("MD_DEVNAME=%s\n", mp->path + DEV_MD_DIR_LEN);
--
--			map_free(map);
- 		}
- 		if (!c->no_devices && sra) {
- 			struct mdinfo *mdi;
--- 
-2.40.1
-

0021-mdadm-Add-functions-for-spare-criteria-verification.patch

@@ -1,286 +0,0 @@
-From 0c0f09cb035b6a27a1d11c54836742a9945a5014 Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Thu, 29 Feb 2024 12:52:05 +0100
-Subject: [PATCH 21/41] mdadm: Add functions for spare criteria verification
-
-It is done similar way in few places. As a result, two almost identical
-functions (dev_size_from_id() and dev_sector_size_from_id()) are
-removed. Now, it uses same file descriptor to send two ioctls.
-
-Two extern functions are added, in next patches
-disk_fd_matches_criteria() is used.
-
-Next optimization is inline zeroing struct spare_criteria. With that,
-we don't need to reset values in get_spare_criteria_imsm().
-
-Dedicated boolean field for checking if criteria are filled is added.
-We don't need to execute the code if it is not set.
-
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Incremental.c |   2 +-
- Monitor.c     |  14 +------
- mdadm.h       |   6 ++-
- super-intel.c |   4 +-
- util.c        | 112 ++++++++++++++++++++++++++------------------------
- 5 files changed, 67 insertions(+), 71 deletions(-)
-
-diff --git a/Incremental.c b/Incremental.c
-index 30c07c03..2b5a5859 100644
---- a/Incremental.c
-+++ b/Incremental.c
-@@ -874,7 +874,7 @@ static int array_try_spare(char *devname, int *dfdp, struct dev_policy *pol,
- 		struct domainlist *dl = NULL;
- 		struct mdinfo *sra;
- 		unsigned long long devsize, freesize = 0;
--		struct spare_criteria sc = {0, 0};
-+		struct spare_criteria sc = {0};
- 
- 		if (is_subarray(mp->metadata))
- 			continue;
-diff --git a/Monitor.c b/Monitor.c
-index 9be2b528..1ece8712 100644
---- a/Monitor.c
-+++ b/Monitor.c
-@@ -1070,22 +1070,12 @@ static dev_t choose_spare(struct state *from, struct state *to,
- 	for (d = from->raid; !dev && d < MAX_DISKS; d++) {
- 		if (from->devid[d] > 0 && from->devstate[d] == 0) {
- 			struct dev_policy *pol;
--			unsigned long long dev_size;
--			unsigned int dev_sector_size;
- 
- 			if (to->metadata->ss->external &&
- 			    test_partition_from_id(from->devid[d]))
- 				continue;
- 
--			if (sc->min_size &&
--			    dev_size_from_id(from->devid[d], &dev_size) &&
--			    dev_size < sc->min_size)
--				continue;
--
--			if (sc->sector_size &&
--			    dev_sector_size_from_id(from->devid[d],
--						    &dev_sector_size) &&
--			    sc->sector_size != dev_sector_size)
-+			if (devid_matches_criteria(from->devid[d], sc) == false)
- 				continue;
- 
- 			pol = devid_policy(from->devid[d]);
-@@ -1170,12 +1160,12 @@ static void try_spare_migration(struct state *statelist)
- {
- 	struct state *from;
- 	struct state *st;
--	struct spare_criteria sc;
- 
- 	link_containers_with_subarrays(statelist);
- 	for (st = statelist; st; st = st->next)
- 		if (st->active < st->raid && st->spare == 0 && !st->err) {
- 			struct domainlist *domlist = NULL;
-+			struct spare_criteria sc = {0};
- 			int d;
- 			struct state *to = st;
- 
-diff --git a/mdadm.h b/mdadm.h
-index 75c887e4..e8abd730 100644
---- a/mdadm.h
-+++ b/mdadm.h
-@@ -430,6 +430,7 @@ struct createinfo {
- };
- 
- struct spare_criteria {
-+	bool criteria_set;
- 	unsigned long long min_size;
- 	unsigned int sector_size;
- };
-@@ -1368,8 +1369,6 @@ extern struct supertype *dup_super(struct supertype *st);
- extern int get_dev_size(int fd, char *dname, unsigned long long *sizep);
- extern int get_dev_sector_size(int fd, char *dname, unsigned int *sectsizep);
- extern int must_be_container(int fd);
--extern int dev_size_from_id(dev_t id, unsigned long long *size);
--extern int dev_sector_size_from_id(dev_t id, unsigned int *size);
- void wait_for(char *dev, int fd);
- 
- /*
-@@ -1708,6 +1707,9 @@ extern int assemble_container_content(struct supertype *st, int mdfd,
- #define	INCR_UNSAFE	2
- #define	INCR_ALREADY	4
- #define	INCR_YES	8
-+
-+extern bool devid_matches_criteria(dev_t devid, struct spare_criteria *sc);
-+extern bool disk_fd_matches_criteria(int disk_fd, struct spare_criteria *sc);
- extern struct mdinfo *container_choose_spares(struct supertype *st,
- 					      struct spare_criteria *criteria,
- 					      struct domainlist *domlist,
-diff --git a/super-intel.c b/super-intel.c
-index 4babec9f..39ec4754 100644
---- a/super-intel.c
-+++ b/super-intel.c
-@@ -1748,9 +1748,6 @@ int get_spare_criteria_imsm(struct supertype *st, struct spare_criteria *c)
- 	int i;
- 	unsigned long long size = 0;
- 
--	c->min_size = 0;
--	c->sector_size = 0;
--
- 	if (!super)
- 		return -EINVAL;
- 	/* find first active disk in array */
-@@ -1774,6 +1771,7 @@ int get_spare_criteria_imsm(struct supertype *st, struct spare_criteria *c)
- 
- 	c->min_size = size * 512;
- 	c->sector_size = super->sector_size;
-+	c->criteria_set = true;
- 
- 	return 0;
- }
-diff --git a/util.c b/util.c
-index b1454473..041e78cf 100644
---- a/util.c
-+++ b/util.c
-@@ -1266,40 +1266,6 @@ struct supertype *super_by_fd(int fd, char **subarrayp)
- 	return st;
- }
- 
--int dev_size_from_id(dev_t id, unsigned long long *size)
--{
--	char buf[20];
--	int fd;
--
--	sprintf(buf, "%d:%d", major(id), minor(id));
--	fd = dev_open(buf, O_RDONLY);
--	if (fd < 0)
--		return 0;
--	if (get_dev_size(fd, NULL, size)) {
--		close(fd);
--		return 1;
--	}
--	close(fd);
--	return 0;
--}
--
--int dev_sector_size_from_id(dev_t id, unsigned int *size)
--{
--	char buf[20];
--	int fd;
--
--	sprintf(buf, "%d:%d", major(id), minor(id));
--	fd = dev_open(buf, O_RDONLY);
--	if (fd < 0)
--		return 0;
--	if (get_dev_sector_size(fd, NULL, size)) {
--		close(fd);
--		return 1;
--	}
--	close(fd);
--	return 0;
--}
--
- struct supertype *dup_super(struct supertype *orig)
- {
- 	struct supertype *st;
-@@ -2088,6 +2054,60 @@ void append_metadata_update(struct supertype *st, void *buf, int len)
- unsigned int __invalid_size_argument_for_IOC = 0;
- #endif
- 
-+/**
-+ * disk_fd_matches_criteria() - check if device matches spare criteria.
-+ * @disk_fd: file descriptor of the disk.
-+ * @sc: criteria to test.
-+ *
-+ * Return: true if disk matches criteria, false otherwise.
-+ */
-+bool disk_fd_matches_criteria(int disk_fd, struct spare_criteria *sc)
-+{
-+	unsigned int dev_sector_size = 0;
-+	unsigned long long dev_size = 0;
-+
-+	if (!sc->criteria_set)
-+		return true;
-+
-+	if (!get_dev_size(disk_fd, NULL, &dev_size) || dev_size < sc->min_size)
-+		return false;
-+
-+	if (!get_dev_sector_size(disk_fd, NULL, &dev_sector_size) ||
-+	    sc->sector_size != dev_sector_size)
-+		return false;
-+
-+	return true;
-+}
-+
-+/**
-+ * devid_matches_criteria() - check if device referenced by devid matches spare criteria.
-+ * @devid: devid of the device to check.
-+ * @sc: criteria to test.
-+ *
-+ * Return: true if disk matches criteria, false otherwise.
-+ */
-+bool devid_matches_criteria(dev_t devid, struct spare_criteria *sc)
-+{
-+	char buf[NAME_MAX];
-+	bool ret;
-+	int fd;
-+
-+	if (!sc->criteria_set)
-+		return true;
-+
-+	snprintf(buf, NAME_MAX, "%d:%d", major(devid), minor(devid));
-+
-+	fd = dev_open(buf, O_RDONLY);
-+	if (!is_fd_valid(fd))
-+		return false;
-+
-+	/* Error code inherited */
-+	ret = disk_fd_matches_criteria(fd, sc);
-+
-+	close(fd);
-+	return ret;
-+}
-+
- /* Pick all spares matching given criteria from a container
-  * if min_size == 0 do not check size
-  * if domlist == NULL do not check domains
-@@ -2111,28 +2131,13 @@ struct mdinfo *container_choose_spares(struct supertype *st,
- 	dp = &disks->devs;
- 	disks->array.spare_disks = 0;
- 	while (*dp) {
--		int found = 0;
-+		bool found = false;
-+
- 		d = *dp;
- 		if (d->disk.state == 0) {
--			/* check if size is acceptable */
--			unsigned long long dev_size;
--			unsigned int dev_sector_size;
--			int size_valid = 0;
--			int sector_size_valid = 0;
--
- 			dev_t dev = makedev(d->disk.major,d->disk.minor);
- 
--			if (!criteria->min_size ||
--			   (dev_size_from_id(dev,  &dev_size) &&
--			    dev_size >= criteria->min_size))
--				size_valid = 1;
--
--			if (!criteria->sector_size ||
--			    (dev_sector_size_from_id(dev, &dev_sector_size) &&
--			     criteria->sector_size == dev_sector_size))
--				sector_size_valid = 1;
--
--			found = size_valid && sector_size_valid;
-+			found = devid_matches_criteria(dev, criteria);
- 
- 			/* check if domain matches */
- 			if (found && domlist) {
-@@ -2141,7 +2146,8 @@ struct mdinfo *container_choose_spares(struct supertype *st,
- 					pol_add(&pol, pol_domain,
- 						spare_group, NULL);
- 				if (domain_test(domlist, pol, metadata) != 1)
--					found = 0;
-+					found = false;
-+
- 				dev_policy_free(pol);
- 			}
- 		}
--- 
-2.40.1
-

0022-mdadm-drop-get_required_spare_criteria.patch

@@ -1,357 +0,0 @@
-From f656201188d73cdc2726265f1348f8ffbf7587be Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Thu, 29 Feb 2024 12:52:06 +0100
-Subject: [PATCH 22/41] mdadm: drop get_required_spare_criteria()
-
-Only IMSM implements get_spare_criteria, so load_super() in
-get_required_spare_criteria() is dead code. It is moved inside
-metadata handler, because only IMSM implements it.
-
-Give possibility to provide devnode to be opened. With that we can hide
-load_container() used only to fill spare criteria inside handler
-and simplify implementation in generic code.
-
-Add helper function for testing spare criteria in Incremental and
-error messages.
-
-File descriptor in get_spare_criteria_imsm() is always opened on purpose.
-New functionality added in next patches will require it. For the same
-reason, function is moved to other place.
-
-No functional changes.
-
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Incremental.c |  77 ++++++++++++++++++++++----------
- Monitor.c     |  35 +++------------
- mdadm.h       |   5 +--
- super-intel.c | 120 +++++++++++++++++++++++++++++++++-----------------
- 4 files changed, 140 insertions(+), 97 deletions(-)
-
-diff --git a/Incremental.c b/Incremental.c
-index 2b5a5859..66c2cc86 100644
---- a/Incremental.c
-+++ b/Incremental.c
-@@ -833,6 +833,53 @@ container_members_max_degradation(struct map_ent *map, struct map_ent *me)
- 	return max_degraded;
- }
- 
-+/**
-+ * incremental_external_test_spare_criteria() - helper to test spare criteria.
-+ * @st: supertype, must be not NULL, it is duplicated here.
-+ * @container_devnm: devnm of the container.
-+ * @disk_fd: file descriptor of device to tested.
-+ * @verbose: verbose flag.
-+ *
-+ * The function is used on new drive verification path to check if it can be added to external
-+ * container. To test spare criteria, metadata must be loaded. It duplicates super to not mess in
-+ * original one.
-+ * Function is executed if superblock supports get_spare_criteria(), otherwise success is returned.
-+ */
-+mdadm_status_t incremental_external_test_spare_criteria(struct supertype *st, char *container_devnm,
-+							int disk_fd, int verbose)
-+{
-+	mdadm_status_t rv = MDADM_STATUS_ERROR;
-+	char container_devname[PATH_MAX];
-+	struct spare_criteria sc = {0};
-+	struct supertype *dup;
-+
-+	if (!st->ss->get_spare_criteria)
-+		return MDADM_STATUS_SUCCESS;
-+
-+	dup = dup_super(st);
-+	snprintf(container_devname, PATH_MAX, "/dev/%s", container_devnm);
-+
-+	if (dup->ss->get_spare_criteria(dup, container_devname, &sc) != 0) {
-+		if (verbose > 1)
-+			pr_err("Failed to get spare criteria for %s\n", container_devname);
-+		goto out;
-+	}
-+
-+	if (!disk_fd_matches_criteria(disk_fd, &sc)) {
-+		if (verbose > 1)
-+			pr_err("Disk does not match spare criteria for %s\n", container_devname);
-+		goto out;
-+	}
-+
-+	rv = MDADM_STATUS_SUCCESS;
-+
-+out:
-+	dup->ss->free_super(dup);
-+	free(dup);
-+
-+	return rv;
-+}
-+
- static int array_try_spare(char *devname, int *dfdp, struct dev_policy *pol,
- 			   struct map_ent *target, int bare,
- 			   struct supertype *st, int verbose)
-@@ -873,8 +920,7 @@ static int array_try_spare(char *devname, int *dfdp, struct dev_policy *pol,
- 		struct supertype *st2;
- 		struct domainlist *dl = NULL;
- 		struct mdinfo *sra;
--		unsigned long long devsize, freesize = 0;
--		struct spare_criteria sc = {0};
-+		unsigned long long freesize = 0;
- 
- 		if (is_subarray(mp->metadata))
- 			continue;
-@@ -925,34 +971,19 @@ static int array_try_spare(char *devname, int *dfdp, struct dev_policy *pol,
- 		if (sra->array.failed_disks == -1)
- 			sra->array.failed_disks = container_members_max_degradation(map, mp);
- 
--		get_dev_size(dfd, NULL, &devsize);
- 		if (sra->component_size == 0) {
--			/* true for containers, here we must read superblock
--			 * to obtain minimum spare size */
--			struct supertype *st3 = dup_super(st2);
--			int mdfd = open_dev(mp->devnm);
--			if (mdfd < 0) {
--				free(st3);
-+			/* true for containers */
-+			if (incremental_external_test_spare_criteria(st2, mp->devnm, dfd, verbose))
- 				goto next;
--			}
--			if (st3->ss->load_container &&
--			    !st3->ss->load_container(st3, mdfd, mp->path)) {
--				if (st3->ss->get_spare_criteria)
--					st3->ss->get_spare_criteria(st3, &sc);
--				st3->ss->free_super(st3);
--			}
--			free(st3);
--			close(mdfd);
- 		}
--		if ((sra->component_size > 0 &&
--		     st2->ss->validate_geometry(st2, sra->array.level, sra->array.layout,
-+
-+		if (sra->component_size > 0 &&
-+		    st2->ss->validate_geometry(st2, sra->array.level, sra->array.layout,
- 						sra->array.raid_disks, &sra->array.chunk_size,
- 						sra->component_size,
- 						sra->devs ? sra->devs->data_offset : INVALID_SECTORS,
- 						devname, &freesize, sra->consistency_policy,
--						0) &&
--		     freesize < sra->component_size) ||
--		    (sra->component_size == 0 && devsize < sc.min_size)) {
-+						0) && freesize < sra->component_size) {
- 			if (verbose > 1)
- 				pr_err("not adding %s to %s as it is too small\n",
- 					devname, mp->path);
-diff --git a/Monitor.c b/Monitor.c
-index 1ece8712..6b4560ae 100644
---- a/Monitor.c
-+++ b/Monitor.c
-@@ -1008,34 +1008,6 @@ static int add_new_arrays(struct mdstat_ent *mdstat, struct state **statelist)
- 	return new_found;
- }
- 
--static int get_required_spare_criteria(struct state *st,
--				       struct spare_criteria *sc)
--{
--	int fd;
--
--	if (!st->metadata || !st->metadata->ss->get_spare_criteria) {
--		sc->min_size = 0;
--		sc->sector_size = 0;
--		return 0;
--	}
--
--	fd = open(st->devname, O_RDONLY);
--	if (fd < 0)
--		return 1;
--	if (st->metadata->ss->external)
--		st->metadata->ss->load_container(st->metadata, fd, st->devname);
--	else
--		st->metadata->ss->load_super(st->metadata, fd, st->devname);
--	close(fd);
--	if (!st->metadata->sb)
--		return 1;
--
--	st->metadata->ss->get_spare_criteria(st->metadata, sc);
--	st->metadata->ss->free_super(st->metadata);
--
--	return 0;
--}
--
- static int check_donor(struct state *from, struct state *to)
- {
- 	struct state *sub;
-@@ -1178,8 +1150,11 @@ static void try_spare_migration(struct state *statelist)
- 				/* member of a container */
- 				to = to->parent;
- 
--			if (get_required_spare_criteria(to, &sc))
--				continue;
-+			if (to->metadata->ss->get_spare_criteria)
-+				if (to->metadata->ss->get_spare_criteria(to->metadata, to->devname,
-+									 &sc))
-+					continue;
-+
- 			if (to->metadata->ss->external) {
- 				/* We must make sure there is
- 				 * no suitable spare in container already.
-diff --git a/mdadm.h b/mdadm.h
-index e8abd730..cbc586f5 100644
---- a/mdadm.h
-+++ b/mdadm.h
-@@ -1116,10 +1116,9 @@ extern struct superswitch {
- 	 * Return spare criteria for array:
- 	 * - minimum disk size can be used in array;
- 	 * - sector size can be used in array.
--	 * Return values: 0 - for success and -EINVAL on error.
- 	 */
--	int (*get_spare_criteria)(struct supertype *st,
--				  struct spare_criteria *sc);
-+	mdadm_status_t (*get_spare_criteria)(struct supertype *st, char *mddev_path,
-+					     struct spare_criteria *sc);
- 	/* Find somewhere to put a bitmap - possibly auto-size it - and
- 	 * update the metadata to record this.  The array may be newly
- 	 * created, in which case data_size may be updated, or it might
-diff --git a/super-intel.c b/super-intel.c
-index 39ec4754..7ad391ac 100644
---- a/super-intel.c
-+++ b/super-intel.c
-@@ -1736,46 +1736,6 @@ static __u32 imsm_min_reserved_sectors(struct intel_super *super)
- 	return  (remainder < rv) ? remainder : rv;
- }
- 
--/*
-- * Return minimum size of a spare and sector size
-- * that can be used in this array
-- */
--int get_spare_criteria_imsm(struct supertype *st, struct spare_criteria *c)
--{
--	struct intel_super *super = st->sb;
--	struct dl *dl;
--	struct extent *e;
--	int i;
--	unsigned long long size = 0;
--
--	if (!super)
--		return -EINVAL;
--	/* find first active disk in array */
--	dl = super->disks;
--	while (dl && (is_failed(&dl->disk) || dl->index == -1))
--		dl = dl->next;
--	if (!dl)
--		return -EINVAL;
--	/* find last lba used by subarrays */
--	e = get_extents(super, dl, 0);
--	if (!e)
--		return -EINVAL;
--	for (i = 0; e[i].size; i++)
--		continue;
--	if (i > 0)
--		size = e[i-1].start + e[i-1].size;
--	free(e);
--
--	/* add the amount of space needed for metadata */
--	size += imsm_min_reserved_sectors(super);
--
--	c->min_size = size * 512;
--	c->sector_size = super->sector_size;
--	c->criteria_set = true;
--
--	return 0;
--}
--
- static bool is_gen_migration(struct imsm_dev *dev);
- 
- #define IMSM_4K_DIV 8
-@@ -11295,6 +11255,84 @@ static const char *imsm_get_disk_controller_domain(const char *path)
- 	return drv;
- }
- 
-+/**
-+ * get_spare_criteria_imsm() - set spare criteria.
-+ * @st: supertype.
-+ * @mddev_path: path to md device devnode, it must be container.
-+ * @c: spare_criteria struct to fill, not NULL.
-+ *
-+ * If superblock is not loaded, use mddev_path to load_container. It must be given in this case.
-+ * Filles size and sector size accordingly to superblock.
-+ */
-+mdadm_status_t get_spare_criteria_imsm(struct supertype *st, char *mddev_path,
-+				       struct spare_criteria *c)
-+{
-+	mdadm_status_t ret = MDADM_STATUS_ERROR;
-+	bool free_superblock = false;
-+	unsigned long long size = 0;
-+	struct intel_super *super;
-+	struct extent *e;
-+	struct dl *dl;
-+	int i;
-+
-+	/* If no superblock and no mddev_path, we cannot load superblock. */
-+	assert(st->sb || mddev_path);
-+
-+	if (mddev_path) {
-+		int fd = open(mddev_path, O_RDONLY);
-+
-+		if (!is_fd_valid(fd))
-+			return MDADM_STATUS_ERROR;
-+
-+		if (!st->sb) {
-+			if (load_container_imsm(st, fd, st->devnm)) {
-+				close(fd);
-+				return MDADM_STATUS_ERROR;
-+			}
-+			free_superblock = true;
-+		}
-+		close(fd);
-+	}
-+
-+	super = st->sb;
-+
-+	/* find first active disk in array */
-+	dl = super->disks;
-+	while (dl && (is_failed(&dl->disk) || dl->index == -1))
-+		dl = dl->next;
-+
-+	if (!dl)
-+		goto out;
-+
-+	/* find last lba used by subarrays */
-+	e = get_extents(super, dl, 0);
-+	if (!e)
-+		goto out;
-+
-+	for (i = 0; e[i].size; i++)
-+		continue;
-+	if (i > 0)
-+		size = e[i - 1].start + e[i - 1].size;
-+	free(e);
-+
-+	/* add the amount of space needed for metadata */
-+	size += imsm_min_reserved_sectors(super);
-+
-+	c->min_size = size * 512;
-+	c->sector_size = super->sector_size;
-+	c->criteria_set = true;
-+	ret = MDADM_STATUS_SUCCESS;
-+
-+out:
-+	if (free_superblock)
-+		free_super_imsm(st);
-+
-+	if (ret != MDADM_STATUS_SUCCESS)
-+		c->criteria_set = false;
-+
-+	return ret;
-+}
-+
- static char *imsm_find_array_devnm_by_subdev(int subdev, char *container)
- {
- 	static char devnm[32];
-@@ -11425,7 +11463,7 @@ static struct mdinfo *get_spares_for_grow(struct supertype *st)
- {
- 	struct spare_criteria sc;
- 
--	get_spare_criteria_imsm(st, &sc);
-+	get_spare_criteria_imsm(st, NULL, &sc);
- 	return container_choose_spares(st, &sc, NULL, NULL, NULL, 0);
- }
- 
--- 
-2.40.1
-

0023-Manage-fix-check-after-dereference-issue.patch

@@ -1,64 +0,0 @@
-From e97ca3583c96591af0e4863c12c394074a51c84d Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Thu, 29 Feb 2024 12:52:07 +0100
-Subject: [PATCH 23/41] Manage: fix check after dereference issue
-
-The code dereferences dev_st earlier without checking, it gives SAST
-problem.
-
-dev_st is needed for attempt_re_add(), but it is executed only if
-dv->disposition != 'S', so move disposition check up.
-
-tst is a must to reach this place, dup_super() have to return valid
-pointer, all it needs to check is if load_super() returns superblock.
-
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Manage.c | 26 ++++++++++++--------------
- 1 file changed, 12 insertions(+), 14 deletions(-)
-
-diff --git a/Manage.c b/Manage.c
-index 30302ac8..77b79cf5 100644
---- a/Manage.c
-+++ b/Manage.c
-@@ -794,25 +794,23 @@ int Manage_add(int fd, int tfd, struct mddev_dev *dv,
- 		 * simply re-add it.
- 		 */
- 
--		if (array->not_persistent == 0) {
-+		if (array->not_persistent == 0 && dv->disposition != 'S') {
-+			int rv = 0;
-+
- 			dev_st = dup_super(tst);
- 			dev_st->ss->load_super(dev_st, tfd, NULL);
--			if (dev_st->sb && dv->disposition != 'S') {
--				int rv;
- 
--				rv = attempt_re_add(fd, tfd, dv, dev_st, tst,
--						    rdev, update, devname,
--						    verbose, array);
--				dev_st->ss->free_super(dev_st);
--				if (rv) {
--					free(dev_st);
--					return rv;
--				}
--			}
--			if (dev_st) {
-+			if (dev_st->sb) {
-+				rv = attempt_re_add(fd, tfd, dv, dev_st, tst, rdev, update,
-+						    devname, verbose, array);
-+
- 				dev_st->ss->free_super(dev_st);
--				free(dev_st);
- 			}
-+
-+			free(dev_st);
-+
-+			if (rv)
-+				return rv;
- 		}
- 		if (dv->disposition == 'M') {
- 			if (verbose > 0)
--- 
-2.40.1
-

0024-Manage-implement-manage_add_external.patch

@@ -1,184 +0,0 @@
-From 29273f606542d915a3ddf37bb084f4eff54fcc3b Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Thu, 29 Feb 2024 12:52:08 +0100
-Subject: [PATCH 24/41] Manage: implement manage_add_external()
-
-Move external add code to separate function. It is easier to control
-error path now. Error messages are adjusted.
-
-No functional changes.
-
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Manage.c | 147 ++++++++++++++++++++++++++++++++-----------------------
- 1 file changed, 86 insertions(+), 61 deletions(-)
-
-diff --git a/Manage.c b/Manage.c
-index 77b79cf5..b3e216cb 100644
---- a/Manage.c
-+++ b/Manage.c
-@@ -695,6 +695,91 @@ skip_re_add:
- 	return 0;
- }
- 
-+/**
-+ * manage_add_external() - Add disk to external container.
-+ * @st: external supertype pointer, must not be NULL, superblock is released here.
-+ * @fd: container file descriptor, must not have O_EXCL mode.
-+ * @disk_fd: device to add file descriptor.
-+ * @disk_name: name of the device to add.
-+ * @disc: disk info.
-+ *
-+ * Superblock is released here because any open fd with O_EXCL will block sysfs_add_disk().
-+ */
-+mdadm_status_t manage_add_external(struct supertype *st, int fd, char *disk_name,
-+				   mdu_disk_info_t *disc)
-+{
-+	mdadm_status_t rv = MDADM_STATUS_ERROR;
-+	char container_devpath[MD_NAME_MAX];
-+	struct mdinfo new_mdi;
-+	struct mdinfo *sra = NULL;
-+	int container_fd;
-+	int disk_fd = -1;
-+
-+	snprintf(container_devpath, MD_NAME_MAX, "%s", fd2devnm(fd));
-+
-+	container_fd = open_dev_excl(container_devpath);
-+	if (!is_fd_valid(container_fd)) {
-+		pr_err("Failed to get exclusive access to container %s\n", container_devpath);
-+		return MDADM_STATUS_ERROR;
-+	}
-+
-+	/* Check if metadata handler is able to accept the drive */
-+	if (!st->ss->validate_geometry(st, LEVEL_CONTAINER, 0, 1, NULL, 0, 0, disk_name, NULL,
-+				       0, 1))
-+		goto out;
-+
-+	Kill(disk_name, NULL, 0, -1, 0);
-+
-+	disk_fd = dev_open(disk_name, O_RDWR | O_EXCL | O_DIRECT);
-+	if (!is_fd_valid(disk_fd)) {
-+		pr_err("Failed to exclusively open %s\n", disk_name);
-+		goto out;
-+	}
-+
-+	if (st->ss->add_to_super(st, disc, disk_fd, disk_name, INVALID_SECTORS))
-+		goto out;
-+
-+	if (!mdmon_running(st->container_devnm))
-+		st->ss->sync_metadata(st);
-+
-+	sra = sysfs_read(container_fd, NULL, 0);
-+	if (!sra) {
-+		pr_err("Failed to read sysfs for %s\n", disk_name);
-+		goto out;
-+	}
-+
-+	sra->array.level = LEVEL_CONTAINER;
-+	/* Need to set data_offset and component_size */
-+	st->ss->getinfo_super(st, &new_mdi, NULL);
-+	new_mdi.disk.major = disc->major;
-+	new_mdi.disk.minor = disc->minor;
-+	new_mdi.recovery_start = 0;
-+
-+	st->ss->free_super(st);
-+
-+	if (sysfs_add_disk(sra, &new_mdi, 0) != 0) {
-+		pr_err("Failed to add %s to container %s\n", disk_name, container_devpath);
-+		goto out;
-+	}
-+	ping_monitor(container_devpath);
-+	rv = MDADM_STATUS_SUCCESS;
-+
-+out:
-+	close(container_fd);
-+
-+	if (sra)
-+		sysfs_free(sra);
-+
-+	if (rv != MDADM_STATUS_SUCCESS && is_fd_valid(disk_fd))
-+		/* Metadata handler records this descriptor, so release it only on failure. */
-+		close(disk_fd);
-+
-+	if (st->sb)
-+		st->ss->free_super(st);
-+
-+	return rv;
-+}
-+
- int Manage_add(int fd, int tfd, struct mddev_dev *dv,
- 	       struct supertype *tst, mdu_array_info_t *array,
- 	       int force, int verbose, char *devname,
-@@ -966,68 +1051,8 @@ int Manage_add(int fd, int tfd, struct mddev_dev *dv,
- 	if (dv->failfast == FlagSet)
- 		disc.state |= (1 << MD_DISK_FAILFAST);
- 	if (tst->ss->external) {
--		/* add a disk
--		 * to an external metadata container */
--		struct mdinfo new_mdi;
--		struct mdinfo *sra;
--		int container_fd;
--		char devnm[32];
--		int dfd;
--
--		strcpy(devnm, fd2devnm(fd));
--
--		container_fd = open_dev_excl(devnm);
--		if (container_fd < 0) {
--			pr_err("add failed for %s: could not get exclusive access to container\n",
--			       dv->devname);
--			tst->ss->free_super(tst);
-+		if (manage_add_external(tst, fd, dv->devname, &disc) != MDADM_STATUS_SUCCESS)
- 			goto unlock;
--		}
--
--		/* Check if metadata handler is able to accept the drive */
--		if (!tst->ss->validate_geometry(tst, LEVEL_CONTAINER, 0, 1, NULL,
--		    0, 0, dv->devname, NULL, 0, 1)) {
--			close(container_fd);
--			goto unlock;
--		}
--
--		Kill(dv->devname, NULL, 0, -1, 0);
--		dfd = dev_open(dv->devname, O_RDWR | O_EXCL|O_DIRECT);
--		if (tst->ss->add_to_super(tst, &disc, dfd,
--					  dv->devname, INVALID_SECTORS)) {
--			close(dfd);
--			close(container_fd);
--			goto unlock;
--		}
--		if (!mdmon_running(tst->container_devnm))
--			tst->ss->sync_metadata(tst);
--
--		sra = sysfs_read(container_fd, NULL, 0);
--		if (!sra) {
--			pr_err("add failed for %s: sysfs_read failed\n",
--			       dv->devname);
--			close(container_fd);
--			tst->ss->free_super(tst);
--			goto unlock;
--		}
--		sra->array.level = LEVEL_CONTAINER;
--		/* Need to set data_offset and component_size */
--		tst->ss->getinfo_super(tst, &new_mdi, NULL);
--		new_mdi.disk.major = disc.major;
--		new_mdi.disk.minor = disc.minor;
--		new_mdi.recovery_start = 0;
--		/* Make sure fds are closed as they are O_EXCL which
--		 * would block add_disk */
--		tst->ss->free_super(tst);
--		if (sysfs_add_disk(sra, &new_mdi, 0) != 0) {
--			pr_err("add new device to external metadata failed for %s\n", dv->devname);
--			close(container_fd);
--			sysfs_free(sra);
--			goto unlock;
--		}
--		ping_monitor(devnm);
--		sysfs_free(sra);
--		close(container_fd);
- 	} else {
- 		tst->ss->free_super(tst);
- 		if (ioctl(fd, ADD_NEW_DISK, &disc)) {
--- 
-2.40.1
-

0025-mdadm-introduce-sysfs_get_container_devnm.patch

@@ -1,138 +0,0 @@
-From 14a8657940be34a781222b4b715bd09eb80d1057 Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Thu, 29 Feb 2024 12:52:09 +0100
-Subject: [PATCH 25/41] mdadm: introduce sysfs_get_container_devnm()
-
-There at least two places where it is done directly, so replace them
-with function. Print message about creating external array, add "/dev/"
-prefix to refer directly to devnode.
-
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Create.c | 21 ++++++++++-----------
- Manage.c | 14 ++++----------
- mdadm.h  |  2 ++
- sysfs.c  | 23 +++++++++++++++++++++++
- 4 files changed, 39 insertions(+), 21 deletions(-)
-
-diff --git a/Create.c b/Create.c
-index 7e9170b6..0b776266 100644
---- a/Create.c
-+++ b/Create.c
-@@ -1142,24 +1142,23 @@ int Create(struct supertype *st, struct mddev_ident *ident, int subdevs,
- 
- 	if (did_default && c->verbose >= 0) {
- 		if (is_subarray(info.text_version)) {
--			char devnm[32];
--			char *ep;
-+			char devnm[MD_NAME_MAX];
- 			struct mdinfo *mdi;
- 
--			strncpy(devnm, info.text_version+1, 32);
--			devnm[31] = 0;
--			ep = strchr(devnm, '/');
--			if (ep)
--				*ep = 0;
-+			sysfs_get_container_devnm(&info, devnm);
- 
- 			mdi = sysfs_read(-1, devnm, GET_VERSION);
-+			if (!mdi) {
-+				pr_err("Cannot open sysfs for container %s\n", devnm);
-+				goto abort_locked;
-+			}
-+
-+			pr_info("Creating array inside %s container /dev/%s\n", mdi->text_version,
-+				devnm);
- 
--			pr_info("Creating array inside %s container %s\n",
--				mdi?mdi->text_version:"managed", devnm);
- 			sysfs_free(mdi);
- 		} else
--			pr_info("Defaulting to version %s metadata\n",
--				info.text_version);
-+			pr_info("Defaulting to version %s metadata\n", info.text_version);
- 	}
- 
- 	map_update(&map, fd2devnm(mdfd), info.text_version,
-diff --git a/Manage.c b/Manage.c
-index b3e216cb..969d0ea9 100644
---- a/Manage.c
-+++ b/Manage.c
-@@ -178,7 +178,7 @@ int Manage_stop(char *devname, int fd, int verbose, int will_retry)
- 	struct map_ent *map = NULL;
- 	struct mdinfo *mdi;
- 	char devnm[32];
--	char container[32];
-+	char container[MD_NAME_MAX] = {0};
- 	int err;
- 	int count;
- 	char buf[SYSFS_MAX_BUF_SIZE];
-@@ -192,15 +192,9 @@ int Manage_stop(char *devname, int fd, int verbose, int will_retry)
- 	 * to stop is probably a bad idea.
- 	 */
- 	mdi = sysfs_read(fd, NULL, GET_LEVEL|GET_COMPONENT|GET_VERSION);
--	if (mdi && is_subarray(mdi->text_version)) {
--		char *sl;
--		strncpy(container, mdi->text_version+1, sizeof(container));
--		container[sizeof(container)-1] = 0;
--		sl = strchr(container, '/');
--		if (sl)
--			*sl = 0;
--	} else
--		container[0] = 0;
-+	if (mdi && is_subarray(mdi->text_version))
-+		sysfs_get_container_devnm(mdi, container);
-+
- 	close(fd);
- 	count = 5;
- 	while (((fd = ((devname[0] == '/')
-diff --git a/mdadm.h b/mdadm.h
-index cbc586f5..39b86bd0 100644
---- a/mdadm.h
-+++ b/mdadm.h
-@@ -777,6 +777,8 @@ enum sysfs_read_flags {
- 
- #define SYSFS_MAX_BUF_SIZE 64
- 
-+extern void sysfs_get_container_devnm(struct mdinfo *mdi, char *buf);
-+
- /* If fd >= 0, get the array it is open on,
-  * else use devnm.
-  */
-diff --git a/sysfs.c b/sysfs.c
-index f95ef701..230b842e 100644
---- a/sysfs.c
-+++ b/sysfs.c
-@@ -74,6 +74,29 @@ void sysfs_free(struct mdinfo *sra)
- 	}
- }
- 
-+/**
-+ * sysfs_get_container_devnm() - extract container device name.
-+ * @mdi: md_info describes member array, with GET_VERSION option.
-+ * @buf: buf to fill, must be MD_NAME_MAX.
-+ *
-+ * External array version is in format {/,-}<container_devnm>/<array_index>
-+ * Extract container_devnm from it and safe it in @buf.
-+ */
-+void sysfs_get_container_devnm(struct mdinfo *mdi, char *buf)
-+{
-+	char *p;
-+
-+	assert(is_subarray(mdi->text_version));
-+
-+	/* Skip first special sign */
-+	snprintf(buf, MD_NAME_MAX, "%s", mdi->text_version + 1);
-+
-+	/* Remove array index */
-+	p = strchr(buf, '/');
-+	if (p)
-+		*p = 0;
-+}
-+
- int sysfs_open(char *devnm, char *devname, char *attr)
- {
- 	char fname[MAX_SYSFS_PATH_LEN];
--- 
-2.40.1
-

0026-mdadm.h-Introduce-custom-device-policies.patch

@@ -1,115 +0,0 @@
-From 1fef0c6ff54c2710f75a239dd8a5e0ffb0068e86 Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Thu, 29 Feb 2024 12:52:10 +0100
-Subject: [PATCH 26/41] mdadm.h: Introduce custom device policies
-
-The approach proposed here is to test drive policies outside
-validate_geometry() separately per every drive and add determined
-policies to list. The implementation reuses dev_policy we have in
-mdadm.
-
-This concept addresses following problems:
-- test drives if they fit together to criteria required by metadata
-  handler,
-- test all drives assigned to the container even if some of them are not
-  target of the request, mdmon is free to use any drive in the same
-  container,
-- extensibility, new policies can be added to handler easy,
-- fix issues related to imsm controller domain verifying.
-
-Add superswitch function. It is used in next patches.
-
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- mdadm.h | 54 ++++++++++++++++++++++++++++++++++++------------------
- 1 file changed, 36 insertions(+), 18 deletions(-)
-
-diff --git a/mdadm.h b/mdadm.h
-index 39b86bd0..889f4a0f 100644
---- a/mdadm.h
-+++ b/mdadm.h
-@@ -940,6 +940,23 @@ struct reshape {
- 	unsigned long long new_size; /* New size of array in sectors */
- };
- 
-+/**
-+ * struct dev_policy - Data structure for policy management.
-+ * @next: pointer to next dev_policy.
-+ * @name: policy name, category.
-+ * @metadata: the metadata type it affects.
-+ * @value: value of the policy.
-+ *
-+ * The functions to manipulate dev_policy lists do not free elements, so they must be statically
-+ * allocated. @name and @metadata can be compared by address.
-+ */
-+typedef struct dev_policy {
-+	struct dev_policy *next;
-+	char *name;
-+	const char *metadata;
-+	const char *value;
-+} dev_policy_t;
-+
- /* A superswitch provides entry point to a metadata handler.
-  *
-  * The superswitch primarily operates on some "metadata" that
-@@ -1168,6 +1185,25 @@ extern struct superswitch {
- 				 char *subdev, unsigned long long *freesize,
- 				 int consistency_policy, int verbose);
- 
-+	/**
-+	 * test_and_add_drive_policies() - test new and add custom policies from metadata handler.
-+	 * @pols: list of currently recorded policies.
-+	 * @disk_fd: file descriptor of the device to check.
-+	 * @verbose: verbose flag.
-+	 *
-+	 * Used by IMSM to verify all drives in container/array, against requirements not recored
-+	 * in superblock, like controller type for IMSM. It should check all drives even if
-+	 * they are not actually used, because mdmon or kernel are free to use any drive assigned to
-+	 * container automatically.
-+	 *
-+	 * Generating and comparison methods belong to metadata handler. It is not mandatory to be
-+	 * implemented.
-+	 *
-+	 * Return: MDADM_STATUS_SUCCESS is expected on success.
-+	 */
-+	mdadm_status_t (*test_and_add_drive_policies)(dev_policy_t **pols, int disk_fd,
-+						      const int verbose);
-+
- 	/* Return a linked list of 'mdinfo' structures for all arrays
- 	 * in the container.  For non-containers, it is like
- 	 * getinfo_super with an allocated mdinfo.*/
-@@ -1372,23 +1408,6 @@ extern int get_dev_sector_size(int fd, char *dname, unsigned int *sectsizep);
- extern int must_be_container(int fd);
- void wait_for(char *dev, int fd);
- 
--/*
-- * Data structures for policy management.
-- * Each device can have a policy structure that lists
-- * various name/value pairs each possibly with a metadata associated.
-- * The policy list is sorted by name/value/metadata
-- */
--struct dev_policy {
--	struct dev_policy *next;
--	char *name;	/* None of these strings are allocated.  They are
--			 * all just references to strings which are known
--			 * to exist elsewhere.
--			 * name and metadata can be compared by address equality.
--			 */
--	const char *metadata;
--	const char *value;
--};
--
- extern char pol_act[], pol_domain[], pol_metadata[], pol_auto[];
- 
- /* iterate over the sublist starting at list, having the same
-@@ -1430,7 +1449,6 @@ extern struct dev_policy *disk_policy(struct mdinfo *disk);
- extern struct dev_policy *devid_policy(int devid);
- extern void dev_policy_free(struct dev_policy *p);
- 
--//extern void pol_new(struct dev_policy **pol, char *name, char *val, char *metadata);
- extern void pol_add(struct dev_policy **pol, char *name, char *val, char *metadata);
- extern struct dev_policy *pol_find(struct dev_policy *pol, char *name);
- 
--- 
-2.40.1
-

0027-mdadm-test_and_add-device-policies-implementation.patch

@@ -1,144 +0,0 @@
-From 5a2e194cb31569880a26356b8594ddca6e3b3828 Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Thu, 29 Feb 2024 12:52:11 +0100
-Subject: [PATCH 27/41] mdadm: test_and_add device policies implementation
-
-Add support for three scenarios:
-- obtaining array wide policies via fd,
-- obtaining array wide policies via struct mdinfo,
-- getting policies for particular drive from the request.
-
-Add proper functions and make them extern. These functions are used
-in next patches.
-
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- mdadm.h  |  7 +++++
- policy.c | 93 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 100 insertions(+)
-
-diff --git a/mdadm.h b/mdadm.h
-index 889f4a0f..af2bc714 100644
---- a/mdadm.h
-+++ b/mdadm.h
-@@ -1452,6 +1452,13 @@ extern void dev_policy_free(struct dev_policy *p);
- extern void pol_add(struct dev_policy **pol, char *name, char *val, char *metadata);
- extern struct dev_policy *pol_find(struct dev_policy *pol, char *name);
- 
-+extern mdadm_status_t drive_test_and_add_policies(struct supertype *st, dev_policy_t **pols,
-+						  int fd, const int verbose);
-+extern mdadm_status_t sysfs_test_and_add_drive_policies(struct supertype *st, dev_policy_t **pols,
-+							struct mdinfo *mdi, const int verbose);
-+extern mdadm_status_t mddev_test_and_add_drive_policies(struct supertype *st, dev_policy_t **pols,
-+							int array_fd, const int verbose);
-+
- enum policy_action {
- 	act_default,
- 	act_include,
-diff --git a/policy.c b/policy.c
-index eee9ef63..4b85f62d 100644
---- a/policy.c
-+++ b/policy.c
-@@ -397,6 +397,99 @@ struct dev_policy *path_policy(char **paths, char *type)
- 	return pol;
- }
- 
-+/**
-+ * drive_test_and_add_policies() - get policies for drive and add them to pols.
-+ * @st: supertype.
-+ * @pols: pointer to pointer of first list entry, cannot be NULL, may point to NULL.
-+ * @fd: device descriptor.
-+ * @verbose: verbose flag.
-+ *
-+ * If supertype doesn't support this functionality return success. Use metadata handler to get
-+ * policies.
-+ */
-+mdadm_status_t drive_test_and_add_policies(struct supertype *st, dev_policy_t **pols, int fd,
-+					   const int verbose)
-+{
-+	if (!st->ss->test_and_add_drive_policies)
-+		return MDADM_STATUS_SUCCESS;
-+
-+	if (st->ss->test_and_add_drive_policies(pols, fd, verbose) == MDADM_STATUS_SUCCESS) {
-+		/* After successful call list cannot be empty */
-+		assert(*pols);
-+		return MDADM_STATUS_SUCCESS;
-+	}
-+
-+	return MDADM_STATUS_ERROR;
-+}
-+
-+/**
-+ * sysfs_test_and_add_policies() - get policies for mddev and add them to pols.
-+ * @st: supertype.
-+ * @pols: pointer to pointer of first list entry, cannot be NULL, may point to NULL.
-+ * @mdi: mdinfo describes the MD array, must have GET_DISKS option.
-+ * @verbose: verbose flag.
-+ *
-+ * If supertype doesn't support this functionality return success. To get policies, all disks
-+ * connected to mddev are analyzed.
-+ */
-+mdadm_status_t sysfs_test_and_add_drive_policies(struct supertype *st, dev_policy_t **pols,
-+						 struct mdinfo *mdi, const int verbose)
-+{
-+	struct mdinfo *sd;
-+
-+	if (!st->ss->test_and_add_drive_policies)
-+		return MDADM_STATUS_SUCCESS;
-+
-+	for (sd = mdi->devs; sd; sd = sd->next) {
-+		char *devpath = map_dev(sd->disk.major, sd->disk.minor, 0);
-+		int fd = dev_open(devpath, O_RDONLY);
-+		int rv;
-+
-+		if (!is_fd_valid(fd)) {
-+			pr_err("Cannot open fd for %s\n", devpath);
-+			return MDADM_STATUS_ERROR;
-+		}
-+
-+		rv = drive_test_and_add_policies(st, pols, fd, verbose);
-+		close(fd);
-+
-+		if (rv)
-+			return MDADM_STATUS_ERROR;
-+	}
-+
-+	return MDADM_STATUS_SUCCESS;
-+}
-+
-+/**
-+ * mddev_test_and_add_policies() - get policies for mddev and add them to pols.
-+ * @st: supertype.
-+ * @pols: pointer to pointer of first list entry, cannot be NULL, may point to NULL.
-+ * @array_fd: MD device descriptor.
-+ * @verbose: verbose flag.
-+ *
-+ * If supertype doesn't support this functionality return success. Use fd to extract disks.
-+ */
-+mdadm_status_t mddev_test_and_add_drive_policies(struct supertype *st, dev_policy_t **pols,
-+						 int array_fd, const int verbose)
-+{
-+	struct mdinfo *sra;
-+	int ret;
-+
-+	if (!st->ss->test_and_add_drive_policies)
-+		return MDADM_STATUS_SUCCESS;
-+
-+	sra = sysfs_read(array_fd, NULL, GET_DEVS);
-+	if (!sra) {
-+		pr_err("Cannot load sysfs for %s\n", fd2devnm(array_fd));
-+		return MDADM_STATUS_ERROR;
-+	}
-+
-+	ret = sysfs_test_and_add_drive_policies(st, pols, sra, verbose);
-+
-+	sysfs_free(sra);
-+	return ret;
-+}
-+
- void pol_add(struct dev_policy **pol,
- 		    char *name, char *val,
- 		    char *metadata)
--- 
-2.40.1
-

0028-Create-Use-device-policies.patch

@@ -1,124 +0,0 @@
-From f5a39b66f794322f30828389ddd488d17f578ad5 Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Thu, 29 Feb 2024 12:52:12 +0100
-Subject: [PATCH 28/41] Create: Use device policies
-
-Generate and compare policies, abort if policies do not match.
-It is tested for both create modes, with container and disk list
-specified directly. It is used if supertype supports it.
-
-For a case when disk list is specified, container may contain more
-devices, so additional check on container is done to analyze all disks.
-
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Create.c | 31 +++++++++++++++++++++++++------
- 1 file changed, 25 insertions(+), 6 deletions(-)
-
-diff --git a/Create.c b/Create.c
-index 0b776266..4397ff49 100644
---- a/Create.c
-+++ b/Create.c
-@@ -497,6 +497,7 @@ int Create(struct supertype *st, struct mddev_ident *ident, int subdevs,
- 	 */
- 	int mdfd;
- 	unsigned long long minsize = 0, maxsize = 0;
-+	dev_policy_t *custom_pols = NULL;
- 	char *mindisc = NULL;
- 	char *maxdisc = NULL;
- 	char *name = ident->name;
-@@ -588,6 +589,9 @@ int Create(struct supertype *st, struct mddev_ident *ident, int subdevs,
- 				first_missing = subdevs * 2;
- 				second_missing = subdevs * 2;
- 				insert_point = subdevs * 2;
-+
-+				if (mddev_test_and_add_drive_policies(st, &custom_pols, fd, 1))
-+					exit(1);
- 			}
- 		}
- 		if (fd >= 0)
-@@ -739,7 +743,7 @@ int Create(struct supertype *st, struct mddev_ident *ident, int subdevs,
- 			close(dfd);
- 			exit(2);
- 		}
--		close(dfd);
-+
- 		info.array.working_disks++;
- 		if (dnum < s->raiddisks && dv->disposition != 'j')
- 			info.array.active_disks++;
-@@ -812,6 +816,11 @@ int Create(struct supertype *st, struct mddev_ident *ident, int subdevs,
- 			}
- 		}
- 
-+		if (drive_test_and_add_policies(st, &custom_pols, dfd, 1))
-+			exit(1);
-+
-+		close(dfd);
-+
- 		if (dv->disposition == 'j')
- 			goto skip_size_check;  /* skip write journal for size check */
- 
-@@ -886,6 +895,7 @@ int Create(struct supertype *st, struct mddev_ident *ident, int subdevs,
- 			close(fd);
- 		}
- 	}
-+
- 	if (missing_disks == dnum && !have_container) {
- 		pr_err("Subdevs can't be all missing\n");
- 		return 1;
-@@ -1140,25 +1150,30 @@ int Create(struct supertype *st, struct mddev_ident *ident, int subdevs,
- 		goto abort_locked;
- 	}
- 
--	if (did_default && c->verbose >= 0) {
-+	if (did_default) {
- 		if (is_subarray(info.text_version)) {
- 			char devnm[MD_NAME_MAX];
- 			struct mdinfo *mdi;
- 
- 			sysfs_get_container_devnm(&info, devnm);
- 
--			mdi = sysfs_read(-1, devnm, GET_VERSION);
-+			mdi = sysfs_read(-1, devnm, GET_VERSION | GET_DEVS);
- 			if (!mdi) {
- 				pr_err("Cannot open sysfs for container %s\n", devnm);
- 				goto abort_locked;
- 			}
- 
--			pr_info("Creating array inside %s container /dev/%s\n", mdi->text_version,
--				devnm);
-+			if (sysfs_test_and_add_drive_policies(st, &custom_pols, mdi, 1))
-+				goto abort_locked;
-+
-+			if (c->verbose >= 0)
-+				pr_info("Creating array inside %s container /dev/%s\n",
-+					mdi->text_version, devnm);
- 
- 			sysfs_free(mdi);
--		} else
-+		} else if (c->verbose >= 0) {
- 			pr_info("Defaulting to version %s metadata\n", info.text_version);
-+		}
- 	}
- 
- 	map_update(&map, fd2devnm(mdfd), info.text_version,
-@@ -1328,6 +1343,8 @@ int Create(struct supertype *st, struct mddev_ident *ident, int subdevs,
- 	udev_unblock();
- 	close(mdfd);
- 	sysfs_uevent(&info, "change");
-+	dev_policy_free(custom_pols);
-+
- 	return 0;
- 
-  abort:
-@@ -1339,5 +1356,7 @@ int Create(struct supertype *st, struct mddev_ident *ident, int subdevs,
- 
- 	if (mdfd >= 0)
- 		close(mdfd);
-+
-+	dev_policy_free(custom_pols);
- 	return 1;
- }
--- 
-2.40.1
-

0029-Manage-check-device-policies-in-manage_add_external.patch

@@ -1,60 +0,0 @@
-From 1251db34616bf4890d86664abc5186e9106e9073 Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Thu, 29 Feb 2024 12:52:13 +0100
-Subject: [PATCH 29/41] Manage: check device policies in manage_add_external()
-
-Only IMSM is going to use device policies so it is added to
-manage_add_external(). Test policies before adding the drive to
-container.
-
-The change blocks adding new device to the container which already
-contains not matching devices
-
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Manage.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
-diff --git a/Manage.c b/Manage.c
-index 969d0ea9..96e5ee54 100644
---- a/Manage.c
-+++ b/Manage.c
-@@ -704,6 +704,7 @@ mdadm_status_t manage_add_external(struct supertype *st, int fd, char *disk_name
- {
- 	mdadm_status_t rv = MDADM_STATUS_ERROR;
- 	char container_devpath[MD_NAME_MAX];
-+	struct dev_policy *pols = NULL;
- 	struct mdinfo new_mdi;
- 	struct mdinfo *sra = NULL;
- 	int container_fd;
-@@ -722,6 +723,9 @@ mdadm_status_t manage_add_external(struct supertype *st, int fd, char *disk_name
- 				       0, 1))
- 		goto out;
- 
-+	if (mddev_test_and_add_drive_policies(st, &pols, container_fd, 1))
-+		goto out;
-+
- 	Kill(disk_name, NULL, 0, -1, 0);
- 
- 	disk_fd = dev_open(disk_name, O_RDWR | O_EXCL | O_DIRECT);
-@@ -730,6 +734,9 @@ mdadm_status_t manage_add_external(struct supertype *st, int fd, char *disk_name
- 		goto out;
- 	}
- 
-+	if (drive_test_and_add_policies(st, &pols, disk_fd, 1))
-+		goto out;
-+
- 	if (st->ss->add_to_super(st, disc, disk_fd, disk_name, INVALID_SECTORS))
- 		goto out;
- 
-@@ -760,6 +767,7 @@ mdadm_status_t manage_add_external(struct supertype *st, int fd, char *disk_name
- 
- out:
- 	close(container_fd);
-+	dev_policy_free(pols);
- 
- 	if (sra)
- 		sysfs_free(sra);
--- 
-2.40.1
-

0030-Monitor-Incremental-use-device-policies.patch

@@ -1,142 +0,0 @@
-From 51a9f2fc5e982f3bcbf88fe1bf30c0bf55bfd49c Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Thu, 29 Feb 2024 12:52:14 +0100
-Subject: [PATCH 30/41] Monitor, Incremental: use device policies
-
-spare_criteria is expanded to contain policies which will be generated
-by handler's get_spare_criteria() function. It provides a way to
-test device for metadata specific policies earlier than during
-add_do_super(), when device is already removed from previous
-array/container for Monitor.
-
-For Incremental, it ensures that all criteria are tested when trying
-spare. It is not tested when device contains valid metadata.
-
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Incremental.c |  2 +-
- Monitor.c     |  3 ++-
- mdadm.h       |  5 +++--
- util.c        | 13 +++++++++----
- 4 files changed, 15 insertions(+), 8 deletions(-)
-
-diff --git a/Incremental.c b/Incremental.c
-index 66c2cc86..958ba9ba 100644
---- a/Incremental.c
-+++ b/Incremental.c
-@@ -865,7 +865,7 @@ mdadm_status_t incremental_external_test_spare_criteria(struct supertype *st, ch
- 		goto out;
- 	}
- 
--	if (!disk_fd_matches_criteria(disk_fd, &sc)) {
-+	if (!disk_fd_matches_criteria(dup, disk_fd, &sc)) {
- 		if (verbose > 1)
- 			pr_err("Disk does not match spare criteria for %s\n", container_devname);
- 		goto out;
-diff --git a/Monitor.c b/Monitor.c
-index 6b4560ae..9b016bc3 100644
---- a/Monitor.c
-+++ b/Monitor.c
-@@ -1047,7 +1047,7 @@ static dev_t choose_spare(struct state *from, struct state *to,
- 			    test_partition_from_id(from->devid[d]))
- 				continue;
- 
--			if (devid_matches_criteria(from->devid[d], sc) == false)
-+			if (devid_matches_criteria(to->metadata, from->devid[d], sc) == false)
- 				continue;
- 
- 			pol = devid_policy(from->devid[d]);
-@@ -1195,6 +1195,7 @@ static void try_spare_migration(struct state *statelist)
- 				}
- 			}
- 			domain_free(domlist);
-+			dev_policy_free(sc.pols);
- 		}
- }
- 
-diff --git a/mdadm.h b/mdadm.h
-index af2bc714..cfa11391 100644
---- a/mdadm.h
-+++ b/mdadm.h
-@@ -433,6 +433,7 @@ struct spare_criteria {
- 	bool criteria_set;
- 	unsigned long long min_size;
- 	unsigned int sector_size;
-+	struct dev_policy *pols;
- };
- 
- typedef enum mdadm_status {
-@@ -1734,8 +1735,8 @@ extern int assemble_container_content(struct supertype *st, int mdfd,
- #define	INCR_ALREADY	4
- #define	INCR_YES	8
- 
--extern bool devid_matches_criteria(dev_t devid, struct spare_criteria *sc);
--extern bool disk_fd_matches_criteria(int disk_fd, struct spare_criteria *sc);
-+extern bool devid_matches_criteria(struct supertype *st, dev_t devid, struct spare_criteria *sc);
-+extern bool disk_fd_matches_criteria(struct supertype *st, int disk_fd, struct spare_criteria *sc);
- extern struct mdinfo *container_choose_spares(struct supertype *st,
- 					      struct spare_criteria *criteria,
- 					      struct domainlist *domlist,
-diff --git a/util.c b/util.c
-index 041e78cf..05ad3343 100644
---- a/util.c
-+++ b/util.c
-@@ -2056,12 +2056,13 @@ unsigned int __invalid_size_argument_for_IOC = 0;
- 
- /**
-  * disk_fd_matches_criteria() - check if device matches spare criteria.
-+ * @st: supertype, not NULL.
-  * @disk_fd: file descriptor of the disk.
-  * @sc: criteria to test.
-  *
-  * Return: true if disk matches criteria, false otherwise.
-  */
--bool disk_fd_matches_criteria(int disk_fd, struct spare_criteria *sc)
-+bool disk_fd_matches_criteria(struct supertype *st, int disk_fd, struct spare_criteria *sc)
- {
- 	unsigned int dev_sector_size = 0;
- 	unsigned long long dev_size = 0;
-@@ -2076,17 +2077,21 @@ bool disk_fd_matches_criteria(int disk_fd, struct spare_criteria *sc)
- 	    sc->sector_size != dev_sector_size)
- 		return false;
- 
-+	if (drive_test_and_add_policies(st, &sc->pols, disk_fd, 0))
-+		return false;
-+
- 	return true;
- }
- 
- /**
-  * devid_matches_criteria() - check if device referenced by devid matches spare criteria.
-+ * @st: supertype, not NULL.
-  * @devid: devid of the device to check.
-  * @sc: criteria to test.
-  *
-  * Return: true if disk matches criteria, false otherwise.
-  */
--bool devid_matches_criteria(dev_t devid, struct spare_criteria *sc)
-+bool devid_matches_criteria(struct supertype *st, dev_t devid, struct spare_criteria *sc)
- {
- 	char buf[NAME_MAX];
- 	bool ret;
-@@ -2102,7 +2107,7 @@ bool devid_matches_criteria(dev_t devid, struct spare_criteria *sc)
- 		return false;
- 
- 	/* Error code inherited */
--	ret = disk_fd_matches_criteria(fd, sc);
-+	ret = disk_fd_matches_criteria(st, fd, sc);
- 
- 	close(fd);
- 	return ret;
-@@ -2137,7 +2142,7 @@ struct mdinfo *container_choose_spares(struct supertype *st,
- 		if (d->disk.state == 0) {
- 			dev_t dev = makedev(d->disk.major,d->disk.minor);
- 
--			found = devid_matches_criteria(dev, criteria);
-+			found = devid_matches_criteria(st, dev, criteria);
- 
- 			/* check if domain matches */
- 			if (found && domlist) {
--- 
-2.40.1
-

0031-imsm-test_and_add_device_policies-implementation.patch

@@ -1,187 +0,0 @@
-From e21aea08eb706939a38f7dc5cf9509a9afd45f8a Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Thu, 29 Feb 2024 12:52:15 +0100
-Subject: [PATCH 31/41] imsm: test_and_add_device_policies() implementation
-
-This patch removes get_disk_controller_domain_imsm() in favour of
-test_and_add_device_policies_imsm(). It is used by
-create, add and mdmonitor.
-
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- platform-intel.h |   1 -
- super-intel.c    | 123 ++++++++++++++++++++++++++++++++++-------------
- 2 files changed, 90 insertions(+), 34 deletions(-)
-
-diff --git a/platform-intel.h b/platform-intel.h
-index ce29d3da..3c2bc595 100644
---- a/platform-intel.h
-+++ b/platform-intel.h
-@@ -262,7 +262,6 @@ int disk_attached_to_hba(int fd, const char *hba_path);
- int devt_attached_to_hba(dev_t dev, const char *hba_path);
- char *devt_to_devpath(dev_t dev, int dev_level, char *buf);
- int path_attached_to_hba(const char *disk_path, const char *hba_path);
--const char *get_sys_dev_type(enum sys_dev_type);
- const struct orom_entry *get_orom_entry_by_device_id(__u16 dev_id);
- const struct imsm_orom *get_orom_by_device_id(__u16 device_id);
- struct sys_dev *device_by_id(__u16 device_id);
-diff --git a/super-intel.c b/super-intel.c
-index 7ad391ac..77140455 100644
---- a/super-intel.c
-+++ b/super-intel.c
-@@ -11220,39 +11220,90 @@ abort:
- 	return retval;
- }
- 
--static char disk_by_path[] = "/dev/disk/by-path/";
--
--static const char *imsm_get_disk_controller_domain(const char *path)
--{
--	char disk_path[PATH_MAX];
--	char *drv=NULL;
--	struct stat st;
--
--	strncpy(disk_path, disk_by_path, PATH_MAX);
--	strncat(disk_path, path, PATH_MAX - strlen(disk_path) - 1);
--	if (stat(disk_path, &st) == 0) {
--		struct sys_dev* hba;
--		char *path;
--
--		path = devt_to_devpath(st.st_rdev, 1, NULL);
--		if (path == NULL)
--			return "unknown";
--		hba = find_disk_attached_hba(-1, path);
--		if (hba && hba->type == SYS_DEV_SAS)
--			drv = "isci";
--		else if (hba && (hba->type == SYS_DEV_SATA || hba->type == SYS_DEV_SATA_VMD))
--			drv = "ahci";
--		else if (hba && hba->type == SYS_DEV_VMD)
--			drv = "vmd";
--		else if (hba && hba->type == SYS_DEV_NVME)
--			drv = "nvme";
--		else
--			drv = "unknown";
--		dprintf("path: %s hba: %s attached: %s\n",
--			path, (hba) ? hba->path : "NULL", drv);
--		free(path);
-+/**
-+ * test_and_add_drive_controller_policy_imsm() - add disk controller to policies list.
-+ * @type: Policy type to search on list.
-+ * @pols: List of currently recorded policies.
-+ * @disk_fd: File descriptor of the device to check.
-+ * @hba: The hba disk is attached, could be NULL if verification is disabled.
-+ * @verbose: verbose flag.
-+ *
-+ * IMSM cares about drive physical placement. If @hba is not set, it adds unknown policy.
-+ * If there is no controller policy on pols we are free to add first one. If there is a policy then,
-+ * new must be the same - no controller mixing allowed.
-+ */
-+static mdadm_status_t
-+test_and_add_drive_controller_policy_imsm(const char * const type, dev_policy_t **pols, int disk_fd,
-+					  struct sys_dev *hba, const int verbose)
-+{
-+	const char *controller_policy = get_sys_dev_type(SYS_DEV_UNKNOWN);
-+	struct dev_policy *pol = pol_find(*pols, (char *)type);
-+	char devname[MAX_RAID_SERIAL_LEN];
-+
-+	if (hba)
-+		controller_policy = get_sys_dev_type(hba->type);
-+
-+	if (!pol) {
-+		pol_add(pols, (char *)type, (char *)controller_policy, "imsm");
-+		return MDADM_STATUS_SUCCESS;
- 	}
--	return drv;
-+
-+	if (strcmp(pol->value, controller_policy) == 0)
-+		return MDADM_STATUS_SUCCESS;
-+
-+	fd2devname(disk_fd, devname);
-+	pr_vrb("Intel(R) raid controller \"%s\" found for %s, but \"%s\" was detected earlier\n",
-+	       controller_policy, devname, pol->value);
-+	pr_vrb("Disks under different controllers cannot be used, aborting\n");
-+
-+	return MDADM_STATUS_ERROR;
-+}
-+
-+struct imsm_drive_policy {
-+	char *type;
-+	mdadm_status_t (*test_and_add_drive_policy)(const char * const type,
-+						    struct dev_policy **pols, int disk_fd,
-+						    struct sys_dev *hba, const int verbose);
-+};
-+
-+struct imsm_drive_policy imsm_policies[] = {
-+	{"controller", test_and_add_drive_controller_policy_imsm},
-+};
-+
-+mdadm_status_t test_and_add_drive_policies_imsm(struct dev_policy **pols, int disk_fd,
-+						const int verbose)
-+{
-+	struct imsm_drive_policy *imsm_pol;
-+	struct sys_dev *hba = NULL;
-+	char path[PATH_MAX];
-+	mdadm_status_t ret;
-+	unsigned int i;
-+
-+	/* If imsm platform verification is disabled, do not search for hba. */
-+	if (check_no_platform() != 1) {
-+		if (!diskfd_to_devpath(disk_fd, 1, path)) {
-+			pr_vrb("IMSM: Failed to retrieve device path by file descriptor.\n");
-+			return MDADM_STATUS_ERROR;
-+		}
-+
-+		hba = find_disk_attached_hba(disk_fd, path);
-+		if (!hba) {
-+			pr_vrb("IMSM: Failed to find hba for %s\n", path);
-+			return MDADM_STATUS_ERROR;
-+		}
-+	}
-+
-+	for (i = 0; i < ARRAY_SIZE(imsm_policies); i++) {
-+		imsm_pol = &imsm_policies[i];
-+
-+		ret = imsm_pol->test_and_add_drive_policy(imsm_pol->type, pols, disk_fd, hba,
-+							  verbose);
-+		if (ret != MDADM_STATUS_SUCCESS)
-+			/* Inherit error code */
-+			return ret;
-+	}
-+
-+	return MDADM_STATUS_SUCCESS;
- }
- 
- /**
-@@ -11280,6 +11331,7 @@ mdadm_status_t get_spare_criteria_imsm(struct supertype *st, char *mddev_path,
- 
- 	if (mddev_path) {
- 		int fd = open(mddev_path, O_RDONLY);
-+		mdadm_status_t rv;
- 
- 		if (!is_fd_valid(fd))
- 			return MDADM_STATUS_ERROR;
-@@ -11291,7 +11343,12 @@ mdadm_status_t get_spare_criteria_imsm(struct supertype *st, char *mddev_path,
- 			}
- 			free_superblock = true;
- 		}
-+
-+		rv = mddev_test_and_add_drive_policies(st, &c->pols, fd, 0);
- 		close(fd);
-+
-+		if (rv != MDADM_STATUS_SUCCESS)
-+			goto out;
- 	}
- 
- 	super = st->sb;
-@@ -13026,7 +13083,7 @@ struct superswitch super_imsm = {
- 	.update_subarray = update_subarray_imsm,
- 	.load_container	= load_container_imsm,
- 	.default_geometry = default_geometry_imsm,
--	.get_disk_controller_domain = imsm_get_disk_controller_domain,
-+	.test_and_add_drive_policies = test_and_add_drive_policies_imsm,
- 	.reshape_super  = imsm_reshape_super,
- 	.manage_reshape = imsm_manage_reshape,
- 	.recover_backup = recover_backup_imsm,
--- 
-2.40.1
-

0032-mdadm-drop-get_disk_controller_domain.patch

@@ -1,75 +0,0 @@
-From e492d2ac143e7f02d6c262130d42a4422e8295d5 Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Thu, 29 Feb 2024 12:52:16 +0100
-Subject: [PATCH 32/41] mdadm: drop get_disk_controller_domain()
-
-This function is unused now. Drop it.
-Controller for IMSM is a device policy and is separated from user defined
-domains.
-
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- mdadm.h  | 15 ---------------
- policy.c | 13 -------------
- 2 files changed, 28 deletions(-)
-
-diff --git a/mdadm.h b/mdadm.h
-index cfa11391..3fedca48 100644
---- a/mdadm.h
-+++ b/mdadm.h
-@@ -1286,21 +1286,6 @@ extern struct superswitch {
- 	 */
- 	struct mdinfo *(*activate_spare)(struct active_array *a,
- 					 struct metadata_update **updates);
--	/*
--	 * Return statically allocated string that represents metadata specific
--	 * controller domain of the disk. The domain is used in disk domain
--	 * matching functions. Disks belong to the same domain if the they have
--	 * the same domain from mdadm.conf and belong the same metadata domain.
--	 * Returning NULL or not providing this handler means that metadata
--	 * does not distinguish the differences between disks that belong to
--	 * different controllers. They are in the domain specified by
--	 * configuration file (mdadm.conf).
--	 * In case when the metadata has the notion of domains based on disk
--	 * it shall return NULL for disks that do not belong to the controller
--	 * the supported domains. Such disks will form another domain and won't
--	 * be mixed with supported ones.
--	 */
--	const char *(*get_disk_controller_domain)(const char *path);
- 
- 	/* for external backup area */
- 	int (*recover_backup)(struct supertype *st, struct mdinfo *info);
-diff --git a/policy.c b/policy.c
-index 4b85f62d..404f9b5d 100644
---- a/policy.c
-+++ b/policy.c
-@@ -365,7 +365,6 @@ struct dev_policy *path_policy(char **paths, char *type)
- {
- 	struct pol_rule *rules;
- 	struct dev_policy *pol = NULL;
--	int i;
- 
- 	rules = config_rules;
- 
-@@ -380,18 +379,6 @@ struct dev_policy *path_policy(char **paths, char *type)
- 		rules = rules->next;
- 	}
- 
--	/* Now add any metadata-specific internal knowledge
--	 * about this path
--	 */
--	for (i=0; paths && paths[0] && superlist[i]; i++)
--		if (superlist[i]->get_disk_controller_domain) {
--			const char *d =
--				superlist[i]->get_disk_controller_domain(
--					paths[0]);
--			if (d)
--				pol_new(&pol, pol_domain, d, superlist[i]->name);
--		}
--
- 	pol_sort(&pol);
- 	pol_dedup(pol);
- 	return pol;
--- 
-2.40.1
-

0033-Revert-policy.c-Avoid-to-take-spare-without-defined-.patch

@@ -1,42 +0,0 @@
-From 933bb500b80cca6f4e9237382f7d8ac852978471 Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Thu, 29 Feb 2024 12:52:17 +0100
-Subject: [PATCH 33/41] Revert "policy.c: Avoid to take spare without defined
- domain by imsm"
-
-This reverts commit 3bf9495270d7 ("policy.c: Avoid to take spare without
-defined domain by imsm").
-
-IMSM does not require to be special now because it doesn't create disk
-controller domain.
-
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- policy.c | 4 ----
- 1 file changed, 4 deletions(-)
-
-diff --git a/policy.c b/policy.c
-index 404f9b5d..dfaafdc0 100644
---- a/policy.c
-+++ b/policy.c
-@@ -759,7 +759,6 @@ int domain_test(struct domainlist *dom, struct dev_policy *pol,
- 	 *  1:  has domains, all match
- 	 */
- 	int found_any = -1;
--	int has_one_domain = 1;
- 	struct dev_policy *p;
- 
- 	pol = pol_find(pol, pol_domain);
-@@ -769,9 +768,6 @@ int domain_test(struct domainlist *dom, struct dev_policy *pol,
- 			dom = dom->next;
- 		if (!dom || strcmp(dom->dom, p->value) != 0)
- 			return 0;
--		if (has_one_domain && metadata && strcmp(metadata, "imsm") == 0)
--			found_any = -1;
--		has_one_domain = 0;
- 	}
- 	return found_any;
- }
--- 
-2.40.1
-

0034-mdadm-remove-inventory-file.patch

@@ -1,307 +0,0 @@
-From 9c63130e8974033969569fb9d0b373d1d1478cf7 Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Wed, 6 Mar 2024 13:45:53 +0100
-Subject: [PATCH 34/41] mdadm: remove inventory file
-
-It is a file with repo content list. It is outdated already.
-Remove it.
-
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- inventory | 284 ------------------------------------------------------
- 1 file changed, 284 deletions(-)
- delete mode 100755 inventory
-
-diff --git a/inventory b/inventory
-deleted file mode 100755
-index c4801b49..00000000
---- a/inventory
-+++ /dev/null
-@@ -1,284 +0,0 @@
--
--.gitignore
--ANNOUNCE-3.0
--ANNOUNCE-3.0.1
--ANNOUNCE-3.0.2
--ANNOUNCE-3.0.3
--ANNOUNCE-3.1
--ANNOUNCE-3.1.1
--ANNOUNCE-3.1.2
--ANNOUNCE-3.1.3
--ANNOUNCE-3.1.4
--ANNOUNCE-3.1.5
--ANNOUNCE-3.2
--ANNOUNCE-3.2.1
--ANNOUNCE-3.2.2
--ANNOUNCE-3.2.3
--ANNOUNCE-3.2.4
--ANNOUNCE-3.2.5
--ANNOUNCE-3.2.6
--ANNOUNCE-3.3
--ANNOUNCE-3.3.1
--ANNOUNCE-3.3.2
--ANNOUNCE-3.3.3
--ANNOUNCE-3.3.4
--ANNOUNCE-3.4
--ANNOUNCE-4.0
--ANNOUNCE-4.1
--ANNOUNCE-4.2
--Assemble.c
--Build.c
--COPYING
--ChangeLog
--Create.c
--Detail.c
--Dump.c
--Examine.c
--Grow.c
--INSTALL
--Incremental.c
--Kill.c
--Makefile
--Manage.c
--Monitor.c
--Query.c
--README.initramfs
--ReadMe.c
--TODO
--bitmap.c
--bitmap.h
--clustermd_tests/
--clustermd_tests/00r10_Create
--clustermd_tests/00r1_Create
--clustermd_tests/01r10_Grow_bitmap-switch
--clustermd_tests/01r10_Grow_resize
--clustermd_tests/01r1_Grow_add
--clustermd_tests/01r1_Grow_bitmap-switch
--clustermd_tests/01r1_Grow_resize
--clustermd_tests/02r10_Manage_add
--clustermd_tests/02r10_Manage_add-spare
--clustermd_tests/02r10_Manage_re-add
--clustermd_tests/02r1_Manage_add
--clustermd_tests/02r1_Manage_add-spare
--clustermd_tests/02r1_Manage_re-add
--clustermd_tests/03r10_switch-recovery
--clustermd_tests/03r10_switch-resync
--clustermd_tests/03r1_switch-recovery
--clustermd_tests/03r1_switch-resync
--clustermd_tests/cluster_conf
--clustermd_tests/func.sh
--config.c
--coverity-gcc-hack.h
--crc32.c
--crc32.h
--crc32c.c
--dlink.c
--dlink.h
--external-reshape-design.txt
--inventory
--lib.c
--makedist
--managemon.c
--mapfile.c
--maps.c
--md.4
--md5.h
--md_p.h
--md_u.h
--mdadm.8.in
--mdadm.c
--mdadm.conf-example
--mdadm.conf.5
--mdadm.h
--mdadm.spec
--mdmon-design.txt
--mdmon.8
--mdmon.c
--mdmon.h
--mdopen.c
--mdstat.c
--misc/
--misc/mdcheck
--misc/syslog-events
--mkinitramfs
--monitor.c
--msg.c
--msg.h
--part.h
--platform-intel.c
--platform-intel.h
--policy.c
--probe_roms.c
--probe_roms.h
--pwgr.c
--raid5extend.c
--raid6check.8
--raid6check.c
--restripe.c
--sg_io.c
--sha1.c
--sha1.h
--super-ddf.c
--super-gpt.c
--super-intel.c
--super-mbr.c
--super0.c
--super1.c
--swap_super.c
--sysfs.c
--systemd/
--systemd/SUSE-mdadm_env.sh
--systemd/mdadm-grow-continue@.service
--systemd/mdadm-last-resort@.service
--systemd/mdadm-last-resort@.timer
--systemd/mdadm.shutdown
--systemd/mdcheck_continue.service
--systemd/mdcheck_continue.timer
--systemd/mdcheck_start.service
--systemd/mdcheck_start.timer
--systemd/mdmon@.service
--systemd/mdmonitor-oneshot.service
--systemd/mdmonitor-oneshot.timer
--systemd/mdmonitor.service
--test
--tests/
--tests/00linear
--tests/00multipath
--tests/00names
--tests/00raid0
--tests/00raid1
--tests/00raid10
--tests/00raid4
--tests/00raid5
--tests/00raid6
--tests/00readonly
--tests/01r1fail
--tests/01r5fail
--tests/01r5integ
--tests/01raid6integ
--tests/01replace
--tests/02lineargrow
--tests/02r1add
--tests/02r1grow
--tests/02r5grow
--tests/02r6grow
--tests/03assem-incr
--tests/03r0assem
--tests/03r5assem
--tests/03r5assem-failed
--tests/03r5assemV1
--tests/04r0update
--tests/04r1update
--tests/04r5swap
--tests/04update-metadata
--tests/04update-uuid
--tests/05r1-add-internalbitmap
--tests/05r1-add-internalbitmap-v1a
--tests/05r1-add-internalbitmap-v1b
--tests/05r1-add-internalbitmap-v1c
--tests/05r1-bitmapfile
--tests/05r1-failfast
--tests/05r1-grow-external
--tests/05r1-grow-internal
--tests/05r1-grow-internal-1
--tests/05r1-internalbitmap
--tests/05r1-internalbitmap-v1a
--tests/05r1-internalbitmap-v1b
--tests/05r1-internalbitmap-v1c
--tests/05r1-n3-bitmapfile
--tests/05r1-re-add
--tests/05r1-re-add-nosuper
--tests/05r1-remove-internalbitmap
--tests/05r1-remove-internalbitmap-v1a
--tests/05r1-remove-internalbitmap-v1b
--tests/05r1-remove-internalbitmap-v1c
--tests/05r5-bitmapfile
--tests/05r5-internalbitmap
--tests/05r6-bitmapfile
--tests/05r6tor0
--tests/06name
--tests/06sysfs
--tests/06wrmostly
--tests/07autoassemble
--tests/07autodetect
--tests/07changelevelintr
--tests/07changelevels
--tests/07layouts
--tests/07reshape5intr
--tests/07revert-grow
--tests/07revert-inplace
--tests/07revert-shrink
--tests/07testreshape5
--tests/09imsm-assemble
--tests/09imsm-create-fail-rebuild
--tests/09imsm-overlap
--tests/10ddf-assemble-missing
--tests/10ddf-create
--tests/10ddf-create-fail-rebuild
--tests/10ddf-fail-create-race
--tests/10ddf-fail-readd
--tests/10ddf-fail-readd-readonly
--tests/10ddf-fail-spare
--tests/10ddf-fail-stop-readd
--tests/10ddf-fail-twice
--tests/10ddf-fail-two-spares
--tests/10ddf-geometry
--tests/10ddf-incremental-wrong-order
--tests/10ddf-sudden-degraded
--tests/11spare-migration
--tests/12imsm-r0_2d-grow-r0_3d
--tests/12imsm-r0_2d-grow-r0_4d
--tests/12imsm-r0_2d-grow-r0_5d
--tests/12imsm-r0_3d-grow-r0_4d
--tests/12imsm-r5_3d-grow-r5_4d
--tests/12imsm-r5_3d-grow-r5_5d
--tests/13imsm-r0_r0_2d-grow-r0_r0_4d
--tests/13imsm-r0_r0_2d-grow-r0_r0_5d
--tests/13imsm-r0_r0_3d-grow-r0_r0_4d
--tests/13imsm-r0_r5_3d-grow-r0_r5_4d
--tests/13imsm-r0_r5_3d-grow-r0_r5_5d
--tests/13imsm-r5_r0_3d-grow-r5_r0_4d
--tests/13imsm-r5_r0_3d-grow-r5_r0_5d
--tests/14imsm-r0_3d-r5_3d-migrate-r5_4d-r5_4d
--tests/14imsm-r0_3d_no_spares-migrate-r5_3d
--tests/14imsm-r0_r0_2d-takeover-r10_4d
--tests/14imsm-r10_4d-grow-r10_5d
--tests/14imsm-r10_r5_4d-takeover-r0_2d
--tests/14imsm-r1_2d-grow-r1_3d
--tests/14imsm-r1_2d-takeover-r0_2d
--tests/14imsm-r5_3d-grow-r5_5d-no-spares
--tests/14imsm-r5_3d-migrate-r4_3d
--tests/15imsm-r0_3d_64k-migrate-r0_3d_256k
--tests/15imsm-r5_3d_4k-migrate-r5_3d_256k
--tests/15imsm-r5_3d_64k-migrate-r5_3d_256k
--tests/15imsm-r5_6d_4k-migrate-r5_6d_256k
--tests/15imsm-r5_r0_3d_64k-migrate-r5_r0_3d_256k
--tests/16imsm-r0_3d-migrate-r5_4d
--tests/16imsm-r0_5d-migrate-r5_6d
--tests/16imsm-r5_3d-migrate-r0_3d
--tests/16imsm-r5_5d-migrate-r0_5d
--tests/18imsm-1d-takeover-r0_1d
--tests/18imsm-1d-takeover-r1_2d
--tests/18imsm-r0_2d-takeover-r10_4d
--tests/18imsm-r10_4d-takeover-r0_2d
--tests/18imsm-r1_2d-takeover-r0_1d
--tests/19raid6auto-repair
--tests/19raid6check
--tests/19raid6repair
--tests/19repair-does-not-destroy
--tests/20raid5journal
--tests/21raid5cache
--tests/ToTest
--tests/env-ddf-template
--tests/env-imsm-template
--tests/func.sh
--tests/imsm-grow-template
--tests/utils
--udev-md-clustered-confirm-device.rules
--udev-md-raid-arrays.rules
--udev-md-raid-assembly.rules
--udev-md-raid-creating.rules
--udev-md-raid-safe-timeouts.rules
--util.c
--uuid.c
--xmalloc.c
--- 
-2.40.1
-

0035-udev.c-Do-not-require-libudev.h-if-DNO_LIBUDEV.patch

@@ -1,31 +0,0 @@
-From 1750758c7ff526e3560433f6235e5cfa35cf646a Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Wed, 6 Mar 2024 15:50:55 +0100
-Subject: [PATCH 35/41] udev.c: Do not require libudev.h if DNO_LIBUDEV
-
-libudev may not be presented at all, do not require it.
-
-Reported-by: Boian Bonev <bbonev@ipacct.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- udev.c | 3 +++
- 1 file changed, 3 insertions(+)
-
-diff --git a/udev.c b/udev.c
-index bc4722b0..066e6ab1 100644
---- a/udev.c
-+++ b/udev.c
-@@ -26,7 +26,10 @@
- #include	<signal.h>
- #include	<limits.h>
- #include	<syslog.h>
-+
-+#ifndef NO_LIBUDEV
- #include	<libudev.h>
-+#endif
- 
- static char *unblock_path;
- 
--- 
-2.40.1
-

0036-util.c-add-limits.h-include-for-NAME_MAX-definition.patch

@@ -1,29 +0,0 @@
-From 8bda86099089b44129ef6206764f9de47a45f0db Mon Sep 17 00:00:00 2001
-From: Alexander Kanavin <alex@linutronix.de>
-Date: Tue, 12 Mar 2024 11:01:50 +0100
-Subject: [PATCH 36/41] util.c: add limits.h include for NAME_MAX definition
-
-Add limits.h include for NAME_MAX definition.
-
-Signed-off-by: Alexander Kanavin <alex@linutronix.de>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- util.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/util.c b/util.c
-index 05ad3343..49a9c6e2 100644
---- a/util.c
-+++ b/util.c
-@@ -36,7 +36,7 @@
- #include	<ctype.h>
- #include	<dirent.h>
- #include	<dlfcn.h>
--
-+#include	<limits.h>
- 
- /*
-  * following taken from linux/blkpg.h because they aren't
--- 
-2.40.1
-

0037-mdadm-set-swapuuid-in-all-handlers.patch

@@ -1,59 +0,0 @@
-From 1c8327950566449e206e613c11c8232032f26787 Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Mon, 18 Mar 2024 16:19:29 +0100
-Subject: [PATCH 37/41] mdadm: set swapuuid in all handlers
-
-It is not set, so it should be 0 but it may vary on compilation
-settings. Set it always to 0.
-
-metadata should care to set UUID and read in proper endianness so it
-doesn't follow super1 concept of swapuuid to depend on endianness.
-
-It is not an attempt to fix endianness issues.
-
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- super-ddf.c   | 1 +
- super-intel.c | 1 +
- super0.c      | 2 ++
- 3 files changed, 4 insertions(+)
-
-diff --git a/super-ddf.c b/super-ddf.c
-index 7571e3b7..94ac5ff3 100644
---- a/super-ddf.c
-+++ b/super-ddf.c
-@@ -5162,6 +5162,7 @@ struct superswitch super_ddf = {
- 	.default_geometry = default_geometry_ddf,
- 
- 	.external	= 1,
-+	.swapuuid	= 0,
- 
- /* for mdmon */
- 	.open_new       = ddf_open_new,
-diff --git a/super-intel.c b/super-intel.c
-index 77140455..e1754f29 100644
---- a/super-intel.c
-+++ b/super-intel.c
-@@ -13116,6 +13116,7 @@ struct superswitch super_imsm = {
- 	.validate_ppl	= validate_ppl_imsm,
- 
- 	.external	= 1,
-+	.swapuuid	= 0,
- 	.name = "imsm",
- 
- /* for mdmon */
-diff --git a/super0.c b/super0.c
-index a7c5f813..9b8a1bd6 100644
---- a/super0.c
-+++ b/super0.c
-@@ -1369,5 +1369,7 @@ struct superswitch super0 = {
- 	.locate_bitmap = locate_bitmap0,
- 	.write_bitmap = write_bitmap0,
- 	.free_super = free_super0,
-+
-+	.swapuuid = 0,
- 	.name = "0.90",
- };
--- 
-2.40.1
-

0038-mdadm-Fix-native-detail-export.patch

@@ -1,247 +0,0 @@
-From ba65d917d121dfb9876053e6f62dbd4ebf2e028c Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Mon, 18 Mar 2024 16:19:30 +0100
-Subject: [PATCH 38/41] mdadm: Fix native --detail --export
-
-Mentioned commit (see Fixes) causes that UUID is not swapped as expected
-for native superblock. Fix this problem.
-
-For detail, we should avoid superblock calls, we can have information
-about supertype from map, use that.
-
-Simplify fname_from_uuid() by removing dependencies to metadata
-handler, it is not needed. Decision is taken at compile time, expect
-super1 but this function is not used by super1. Add warning about that.
-Remove separator, it is always ':'.
-
-Fixes: 60c19530dd7c ("Detail: remove duplicated code")
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Detail.c      | 26 +++++++++++++++++++++++++-
- mdadm.h       |  3 +--
- super-ddf.c   | 10 +++++-----
- super-intel.c | 16 ++++++++--------
- util.c        | 24 +++++++++++++-----------
- 5 files changed, 52 insertions(+), 27 deletions(-)
-
-diff --git a/Detail.c b/Detail.c
-index f23ec16f..55a086d3 100644
---- a/Detail.c
-+++ b/Detail.c
-@@ -49,6 +49,30 @@ static int add_device(const char *dev, char ***p_devices,
- 	return n_devices + 1;
- }
- 
-+/**
-+ * detail_fname_from_uuid() - generate uuid string with special super1 handling.
-+ * @mp: map entry to parse.
-+ * @buf: buf to write.
-+ *
-+ * Hack to workaround an issue with super1 superblocks. It swapuuid set in order for assembly
-+ * to work, but can't have it set if we want this printout to match all the other uuid printouts
-+ * in super1.c, so we force swapuuid to 1 to make our printout match the rest of super1.
-+ *
-+ * Always convert uuid if host is big endian.
-+ */
-+char *detail_fname_from_uuid(struct map_ent *mp, char *buf)
-+{
-+#if __BYTE_ORDER == BIG_ENDIAN
-+	bool swap = true;
-+#else
-+	bool swap = false;
-+#endif
-+	if (strncmp(mp->metadata, "1.", 2) == 0)
-+		swap = true;
-+
-+	return __fname_from_uuid(mp->uuid, swap, buf, ':');
-+}
-+
- int Detail(char *dev, struct context *c)
- {
- 	/*
-@@ -256,7 +280,7 @@ int Detail(char *dev, struct context *c)
- 			mp = map_by_devnm(&map, fd2devnm(fd));
- 
- 		if (mp) {
--			__fname_from_uuid(mp->uuid, 0, nbuf, ':');
-+			detail_fname_from_uuid(mp, nbuf);
- 			printf("MD_UUID=%s\n", nbuf + 5);
- 			if (mp->path && strncmp(mp->path, DEV_MD_DIR, DEV_MD_DIR_LEN) == 0)
- 				printf("MD_DEVNAME=%s\n", mp->path + DEV_MD_DIR_LEN);
-diff --git a/mdadm.h b/mdadm.h
-index 3fedca48..a363708a 100644
---- a/mdadm.h
-+++ b/mdadm.h
-@@ -1696,8 +1696,7 @@ extern const int uuid_zero[4];
- extern int same_uuid(int a[4], int b[4], int swapuuid);
- extern void copy_uuid(void *a, int b[4], int swapuuid);
- extern char *__fname_from_uuid(int id[4], int swap, char *buf, char sep);
--extern char *fname_from_uuid(struct supertype *st,
--			     struct mdinfo *info, char *buf, char sep);
-+extern char *fname_from_uuid(struct mdinfo *info, char *buf);
- extern unsigned long calc_csum(void *super, int bytes);
- extern int enough(int level, int raid_disks, int layout, int clean,
- 		   char *avail);
-diff --git a/super-ddf.c b/super-ddf.c
-index 94ac5ff3..21426c75 100644
---- a/super-ddf.c
-+++ b/super-ddf.c
-@@ -1617,7 +1617,7 @@ static void brief_examine_super_ddf(struct supertype *st, int verbose)
- 	struct mdinfo info;
- 	char nbuf[64];
- 	getinfo_super_ddf(st, &info, NULL);
--	fname_from_uuid(st, &info, nbuf, ':');
-+	fname_from_uuid(&info, nbuf);
- 
- 	printf("ARRAY metadata=ddf UUID=%s\n", nbuf + 5);
- }
-@@ -1632,7 +1632,7 @@ static void brief_examine_subarrays_ddf(struct supertype *st, int verbose)
- 	unsigned int i;
- 	char nbuf[64];
- 	getinfo_super_ddf(st, &info, NULL);
--	fname_from_uuid(st, &info, nbuf, ':');
-+	fname_from_uuid(&info, nbuf);
- 
- 	for (i = 0; i < be16_to_cpu(ddf->virt->max_vdes); i++) {
- 		struct virtual_entry *ve = &ddf->virt->entries[i];
-@@ -1645,7 +1645,7 @@ static void brief_examine_subarrays_ddf(struct supertype *st, int verbose)
- 		ddf->currentconf =&vcl;
- 		vcl.vcnum = i;
- 		uuid_from_super_ddf(st, info.uuid);
--		fname_from_uuid(st, &info, nbuf1, ':');
-+		fname_from_uuid(&info, nbuf1);
- 		_ddf_array_name(namebuf, ddf, i);
- 		printf("ARRAY%s%s container=%s member=%d UUID=%s\n",
- 		       namebuf[0] == '\0' ? "" : " " DEV_MD_DIR, namebuf,
-@@ -1658,7 +1658,7 @@ static void export_examine_super_ddf(struct supertype *st)
- 	struct mdinfo info;
- 	char nbuf[64];
- 	getinfo_super_ddf(st, &info, NULL);
--	fname_from_uuid(st, &info, nbuf, ':');
-+	fname_from_uuid(&info, nbuf);
- 	printf("MD_METADATA=ddf\n");
- 	printf("MD_LEVEL=container\n");
- 	printf("MD_UUID=%s\n", nbuf+5);
-@@ -1798,7 +1798,7 @@ static void brief_detail_super_ddf(struct supertype *st, char *subarray)
- 		return;
- 	else
- 		uuid_of_ddf_subarray(ddf, vcnum, info.uuid);
--	fname_from_uuid(st, &info, nbuf,':');
-+	fname_from_uuid(&info, nbuf);
- 	printf(" UUID=%s", nbuf + 5);
- }
- 
-diff --git a/super-intel.c b/super-intel.c
-index e1754f29..ff2590fe 100644
---- a/super-intel.c
-+++ b/super-intel.c
-@@ -2217,7 +2217,7 @@ static void examine_super_imsm(struct supertype *st, char *homehost)
- 	else
- 		printf("not supported\n");
- 	getinfo_super_imsm(st, &info, NULL);
--	fname_from_uuid(st, &info, nbuf, ':');
-+	fname_from_uuid(&info, nbuf);
- 	printf("           UUID : %s\n", nbuf + 5);
- 	sum = __le32_to_cpu(mpb->check_sum);
- 	printf("       Checksum : %08x %s\n", sum,
-@@ -2242,7 +2242,7 @@ static void examine_super_imsm(struct supertype *st, char *homehost)
- 
- 		super->current_vol = i;
- 		getinfo_super_imsm(st, &info, NULL);
--		fname_from_uuid(st, &info, nbuf, ':');
-+		fname_from_uuid(&info, nbuf);
- 		print_imsm_dev(super, dev, nbuf + 5, super->disks->index);
- 	}
- 	for (i = 0; i < mpb->num_disks; i++) {
-@@ -2267,7 +2267,7 @@ static void brief_examine_super_imsm(struct supertype *st, int verbose)
- 	char nbuf[64];
- 
- 	getinfo_super_imsm(st, &info, NULL);
--	fname_from_uuid(st, &info, nbuf, ':');
-+	fname_from_uuid(&info, nbuf);
- 	printf("ARRAY metadata=imsm UUID=%s\n", nbuf + 5);
- }
- 
-@@ -2284,13 +2284,13 @@ static void brief_examine_subarrays_imsm(struct supertype *st, int verbose)
- 		return;
- 
- 	getinfo_super_imsm(st, &info, NULL);
--	fname_from_uuid(st, &info, nbuf, ':');
-+	fname_from_uuid(&info, nbuf);
- 	for (i = 0; i < super->anchor->num_raid_devs; i++) {
- 		struct imsm_dev *dev = get_imsm_dev(super, i);
- 
- 		super->current_vol = i;
- 		getinfo_super_imsm(st, &info, NULL);
--		fname_from_uuid(st, &info, nbuf1, ':');
-+		fname_from_uuid(&info, nbuf1);
- 		printf("ARRAY " DEV_MD_DIR "%.16s container=%s member=%d UUID=%s\n",
- 		       dev->volume, nbuf + 5, i, nbuf1 + 5);
- 	}
-@@ -2304,7 +2304,7 @@ static void export_examine_super_imsm(struct supertype *st)
- 	char nbuf[64];
- 
- 	getinfo_super_imsm(st, &info, NULL);
--	fname_from_uuid(st, &info, nbuf, ':');
-+	fname_from_uuid(&info, nbuf);
- 	printf("MD_METADATA=imsm\n");
- 	printf("MD_LEVEL=container\n");
- 	printf("MD_UUID=%s\n", nbuf+5);
-@@ -2324,7 +2324,7 @@ static void detail_super_imsm(struct supertype *st, char *homehost,
- 		super->current_vol = strtoul(subarray, NULL, 10);
- 
- 	getinfo_super_imsm(st, &info, NULL);
--	fname_from_uuid(st, &info, nbuf, ':');
-+	fname_from_uuid(&info, nbuf);
- 	printf("\n              UUID : %s\n", nbuf + 5);
- 
- 	super->current_vol = temp_vol;
-@@ -2341,7 +2341,7 @@ static void brief_detail_super_imsm(struct supertype *st, char *subarray)
- 		super->current_vol = strtoul(subarray, NULL, 10);
- 
- 	getinfo_super_imsm(st, &info, NULL);
--	fname_from_uuid(st, &info, nbuf, ':');
-+	fname_from_uuid(&info, nbuf);
- 	printf(" UUID=%s", nbuf + 5);
- 
- 	super->current_vol = temp_vol;
-diff --git a/util.c b/util.c
-index 49a9c6e2..03336d6f 100644
---- a/util.c
-+++ b/util.c
-@@ -589,19 +589,21 @@ char *__fname_from_uuid(int id[4], int swap, char *buf, char sep)
- 
- }
- 
--char *fname_from_uuid(struct supertype *st, struct mdinfo *info,
--		      char *buf, char sep)
--{
--	// dirty hack to work around an issue with super1 superblocks...
--	// super1 superblocks need swapuuid set in order for assembly to
--	// work, but can't have it set if we want this printout to match
--	// all the other uuid printouts in super1.c, so we force swapuuid
--	// to 1 to make our printout match the rest of super1
-+/**
-+ * fname_from_uuid() - generate uuid string. Should not be used with super1.
-+ * @info: info with uuid
-+ * @buf: buf to fill.
-+ *
-+ * This routine should not be used with super1. See detail_fname_from_uuid() for details. It does
-+ * not use superswitch swapuuid as it should be 0 but it has to do UUID conversion if host is big
-+ * endian- left for backward compatibility.
-+ */
-+char *fname_from_uuid(struct mdinfo *info, char *buf)
-+{
- #if __BYTE_ORDER == BIG_ENDIAN
--	return __fname_from_uuid(info->uuid, 1, buf, sep);
-+	return __fname_from_uuid(info->uuid, true, buf, ':');
- #else
--	return __fname_from_uuid(info->uuid, (st->ss == &super1) ? 1 :
--				 st->ss->swapuuid, buf, sep);
-+	return __fname_from_uuid(info->uuid, false, buf, ':');
- #endif
- }
- 
--- 
-2.40.1
-

0039-sysfs-remove-vers-parameter-from-sysfs_set_array.patch

@@ -1,87 +0,0 @@
-From de23e12a39cfc94575e1173293fe9e15337ee999 Mon Sep 17 00:00:00 2001
-From: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Date: Mon, 18 Mar 2024 16:53:31 +0100
-Subject: [PATCH 39/41] sysfs: remove vers parameter from sysfs_set_array
-
-9003 was passed directly to sysfs_set_array() since md_get_version()
-always returned this value. md_get_version() was removed long ago.
-
-Remove dead version check from sysfs_set_array().
-Remove "vers" argument and fix function calls.
-
-Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Assemble.c | 2 +-
- mdadm.h    | 2 +-
- sysfs.c    | 6 ++----
- util.c     | 3 +--
- 4 files changed, 5 insertions(+), 8 deletions(-)
-
-diff --git a/Assemble.c b/Assemble.c
-index 9d042055..f6c5b99e 100644
---- a/Assemble.c
-+++ b/Assemble.c
-@@ -1988,7 +1988,7 @@ int assemble_container_content(struct supertype *st, int mdfd,
- 	 * and ignoring special character on the first place.
- 	 */
- 	if (strcmp(sra->text_version + 1, content->text_version + 1) != 0) {
--		if (sysfs_set_array(content, 9003) != 0) {
-+		if (sysfs_set_array(content) != 0) {
- 			sysfs_free(sra);
- 			return 1;
- 		}
-diff --git a/mdadm.h b/mdadm.h
-index a363708a..ae2106a2 100644
---- a/mdadm.h
-+++ b/mdadm.h
-@@ -811,7 +811,7 @@ extern int sysfs_attribute_available(struct mdinfo *sra, struct mdinfo *dev,
- extern int sysfs_get_str(struct mdinfo *sra, struct mdinfo *dev,
- 			 char *name, char *val, int size);
- extern int sysfs_set_safemode(struct mdinfo *sra, unsigned long ms);
--extern int sysfs_set_array(struct mdinfo *info, int vers);
-+extern int sysfs_set_array(struct mdinfo *info);
- extern int sysfs_add_disk(struct mdinfo *sra, struct mdinfo *sd, int resume);
- extern int sysfs_disk_to_scsi_id(int fd, __u32 *id);
- extern int sysfs_unique_holder(char *devnm, long rdev);
-diff --git a/sysfs.c b/sysfs.c
-index 230b842e..4ded1672 100644
---- a/sysfs.c
-+++ b/sysfs.c
-@@ -678,7 +678,7 @@ int sysfs_set_safemode(struct mdinfo *sra, unsigned long ms)
- 	return sysfs_set_str(sra, NULL, "safe_mode_delay", delay);
- }
- 
--int sysfs_set_array(struct mdinfo *info, int vers)
-+int sysfs_set_array(struct mdinfo *info)
- {
- 	int rv = 0;
- 	char ver[100];
-@@ -702,9 +702,7 @@ int sysfs_set_array(struct mdinfo *info, int vers)
- 			if (strlen(buf) >= 9 && buf[9] == '-')
- 				ver[9] = '-';
- 
--		if ((vers % 100) < 2 ||
--		    sysfs_set_str(info, NULL, "metadata_version",
--				  ver) < 0) {
-+		if (sysfs_set_str(info, NULL, "metadata_version", ver) < 0) {
- 			pr_err("This kernel does not support external metadata.\n");
- 			return 1;
- 		}
-diff --git a/util.c b/util.c
-index 03336d6f..9e837045 100644
---- a/util.c
-+++ b/util.c
-@@ -1867,8 +1867,7 @@ int set_array_info(int mdfd, struct supertype *st, struct mdinfo *info)
- 	int rv;
- 
- 	if (st->ss->external)
--		return sysfs_set_array(info, 9003);
--		
-+		return sysfs_set_array(info);
- 	memset(&inf, 0, sizeof(inf));
- 	inf.major_version = info->array.major_version;
- 	inf.minor_version = info->array.minor_version;
--- 
-2.40.1
-

0040-mdadm-fix-grow-segfault-for-IMSM.patch

@@ -1,55 +0,0 @@
-From ae996e81232b8ba991e763dfa15577a0af358358 Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Mon, 18 Mar 2024 17:28:42 +0100
-Subject: [PATCH 40/41] mdadm: fix grow segfault for IMSM
-
-If sc is not initialized, there is possibility that sc.pols is not zeroed
-and it causes segfault.
-
-Add missing initialization.
-Add missing dev_policy_free() in two places.
-
-Fixes: f656201188d7 ("mdadm: drop get_required_spare_criteria()")
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Incremental.c | 1 +
- super-intel.c | 9 +++++++--
- 2 files changed, 8 insertions(+), 2 deletions(-)
-
-diff --git a/Incremental.c b/Incremental.c
-index 958ba9ba..83db0712 100644
---- a/Incremental.c
-+++ b/Incremental.c
-@@ -874,6 +874,7 @@ mdadm_status_t incremental_external_test_spare_criteria(struct supertype *st, ch
- 	rv = MDADM_STATUS_SUCCESS;
- 
- out:
-+	dev_policy_free(sc.pols);
- 	dup->ss->free_super(dup);
- 	free(dup);
- 
-diff --git a/super-intel.c b/super-intel.c
-index ff2590fe..70f3c4ef 100644
---- a/super-intel.c
-+++ b/super-intel.c
-@@ -11518,10 +11518,15 @@ static int imsm_reshape_is_allowed_on_container(struct supertype *st,
-  */
- static struct mdinfo *get_spares_for_grow(struct supertype *st)
- {
--	struct spare_criteria sc;
-+	struct spare_criteria sc = {0};
-+	struct mdinfo *spares;
- 
- 	get_spare_criteria_imsm(st, NULL, &sc);
--	return container_choose_spares(st, &sc, NULL, NULL, NULL, 0);
-+	spares = container_choose_spares(st, &sc, NULL, NULL, NULL, 0);
-+
-+	dev_policy_free(sc.pols);
-+
-+	return spares;
- }
- 
- /******************************************************************************
--- 
-2.40.1
-

0041-Remove-all-if-zeros-pt.2.patch

@@ -1,85 +0,0 @@
-From da4d58b6d01ed8b0149b777eba7818861fde8c80 Mon Sep 17 00:00:00 2001
-From: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Date: Tue, 19 Mar 2024 11:15:29 +0100
-Subject: [PATCH 41/41] Remove all "if zeros" pt.2
-
-Commit e15e8b00cbce ("Remove all "if zeros"") did not remove all "if 0"
-code blocks.
-
-This commit is cleanup for that commit.
-
-Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Build.c  |  6 ------
- Grow.c   | 13 +------------
- super1.c | 11 -----------
- 3 files changed, 1 insertion(+), 29 deletions(-)
-
-diff --git a/Build.c b/Build.c
-index 1fbf8596..1be90e41 100644
---- a/Build.c
-+++ b/Build.c
-@@ -156,12 +156,6 @@ int Build(struct mddev_ident *ident, struct mddev_dev *devlist, struct shape *s,
- 		bitmap_fd = open(s->bitmap_file, O_RDWR);
- 		if (bitmap_fd < 0) {
- 			int major = BITMAP_MAJOR_HI;
--#if 0
--			if (s->bitmap_chunk == UnSet) {
--				pr_err("%s cannot be opened.\n", s->bitmap_file);
--				goto abort;
--			}
--#endif
- 			bitmapsize = s->size >> 9; /* FIXME wrong for RAID10 */
- 			if (CreateBitmap(s->bitmap_file, 1, NULL,
- 					 s->bitmap_chunk, c->delay,
-diff --git a/Grow.c b/Grow.c
-index c69a342d..074f1995 100644
---- a/Grow.c
-+++ b/Grow.c
-@@ -4413,19 +4413,8 @@ static void validate(int afd, int bfd, unsigned long long offset)
- 		lseek64(afd, __le64_to_cpu(bsb2.arraystart)*512, 0);
- 		if ((unsigned long long)read(afd, abuf, len) != len)
- 			fail("read first from array failed");
--		if (memcmp(bbuf, abuf, len) != 0) {
--#if 0
--			int i;
--			printf("offset=%llu len=%llu\n",
--			       (unsigned long long)__le64_to_cpu(bsb2.arraystart)*512, len);
--			for (i=0; i<len; i++)
--				if (bbuf[i] != abuf[i]) {
--					printf("first diff byte %d\n", i);
--					break;
--				}
--#endif
-+		if (memcmp(bbuf, abuf, len) != 0)
- 			fail("data1 compare failed");
--		}
- 	}
- 	if (bsb2.length2) {
- 		unsigned long long len = __le64_to_cpu(bsb2.length2)*512;
-diff --git a/super1.c b/super1.c
-index 5439b7bb..81d29a65 100644
---- a/super1.c
-+++ b/super1.c
-@@ -575,17 +575,6 @@ static void examine_super1(struct supertype *st, char *homehost)
- 			inconsistent = 1;
- 		}
- 	}
--#if 0
--	/* This is confusing too */
--	faulty = 0;
--	for (i = 0; i < __le32_to_cpu(sb->max_dev); i++) {
--		int role = __le16_to_cpu(sb->dev_roles[i]);
--		if (role == MD_DISK_ROLE_FAULTY)
--			faulty++;
--	}
--	if (faulty)
--		printf(" %d failed", faulty);
--#endif
- 	printf(" ('A' == active, '.' == missing, 'R' == replacing)");
- 	printf("\n");
- 	for (d = 0; d < __le32_to_cpu(sb->max_dev); d++) {
--- 
-2.40.1
-

0042-mdadm-Move-pr_vrb-define-to-mdadm.h.patch

@@ -1,44 +0,0 @@
-From cc75b0faaa016e54d569486c9a7abe6c39cb883a Mon Sep 17 00:00:00 2001
-From: Blazej Kucman <blazej.kucman@intel.com>
-Date: Fri, 22 Mar 2024 12:51:15 +0100
-Subject: [PATCH 42/66] mdadm: Move pr_vrb define to mdadm.h
-
-Move pr_vrb define from super-intel.c to mdadm.h to make it widely
-available. This change will be used in the next patches.
-
-Signed-off-by: Blazej Kucman <blazej.kucman@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- mdadm.h       | 2 ++
- super-intel.c | 2 --
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/mdadm.h b/mdadm.h
-index ae2106a2..fbb161ba 100644
---- a/mdadm.h
-+++ b/mdadm.h
-@@ -1911,6 +1911,8 @@ static inline int xasprintf(char **strp, const char *fmt, ...) {
- 
- #define pr_info(fmt, args...) printf("%s: "fmt, Name, ##args)
- 
-+#define pr_vrb(fmt, arg...) ((void)(verbose && pr_err(fmt, ##arg)))
-+
- void *xmalloc(size_t len);
- void *xrealloc(void *ptr, size_t len);
- void *xcalloc(size_t num, size_t size);
-diff --git a/super-intel.c b/super-intel.c
-index 70f3c4ef..212387ec 100644
---- a/super-intel.c
-+++ b/super-intel.c
-@@ -393,8 +393,6 @@ struct md_list {
- 	struct md_list *next;
- };
- 
--#define pr_vrb(fmt, arg...) (void) (verbose && pr_err(fmt, ##arg))
--
- static __u8 migr_type(struct imsm_dev *dev)
- {
- 	if (dev->vol.migr_type == MIGR_VERIFY &&
--- 
-2.41.0
-

0043-Add-reading-Opal-NVMe-encryption-information.patch

@@ -1,463 +0,0 @@
-From cc48406887b3bc439e3462e8e4d20f992e81b87e Mon Sep 17 00:00:00 2001
-From: Blazej Kucman <blazej.kucman@intel.com>
-Date: Fri, 22 Mar 2024 12:51:16 +0100
-Subject: [PATCH 43/66] Add reading Opal NVMe encryption information
-
-For NVMe devices with Opal support, encryption information, status and
-ability are determined based on Opal Level 0 discovery response. Technical
-documentation used is given in the implementation.
-
-Ability in general describes what type of encryption is supported, Status
-describes in what state the disk with encryption support is. The current
-patch includes only the implementation of reading encryption information,
-functions will be used in one of the next patches.
-
-Motivation for adding this functionality is to block mixing of disks in
-IMSM arrays with encryption enabled and disabled. The main goal is to not
-allow stealing data by rebuilding array to not encrypted drive which can be
-read elsewhere.
-
-Value ENA_OTHER from enum encryption_ability will be used in the next
-patch.
-
-Signed-off-by: Blazej Kucman <blazej.kucman@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Makefile           |   4 +-
- drive_encryption.c | 362 +++++++++++++++++++++++++++++++++++++++++++++
- drive_encryption.h |  32 ++++
- 3 files changed, 396 insertions(+), 2 deletions(-)
- create mode 100644 drive_encryption.c
- create mode 100644 drive_encryption.h
-
-diff --git a/Makefile b/Makefile
-index cbdba49a..7c221a89 100644
---- a/Makefile
-+++ b/Makefile
-@@ -170,7 +170,7 @@ OBJS = mdadm.o config.o policy.o mdstat.o  ReadMe.o uuid.o util.o maps.o lib.o u
-        mdopen.o super0.o super1.o super-ddf.o super-intel.o bitmap.o \
-        super-mbr.o super-gpt.o \
-        restripe.o sysfs.o sha1.o mapfile.o crc32.o sg_io.o msg.o xmalloc.o \
--       platform-intel.o probe_roms.o crc32c.o
-+       platform-intel.o probe_roms.o crc32c.o drive_encryption.o
- 
- CHECK_OBJS = restripe.o uuid.o sysfs.o maps.o lib.o xmalloc.o dlink.o
- 
-@@ -183,7 +183,7 @@ MON_OBJS = mdmon.o monitor.o managemon.o uuid.o util.o maps.o mdstat.o sysfs.o c
- 	Kill.o sg_io.o dlink.o ReadMe.o super-intel.o \
- 	super-mbr.o super-gpt.o \
- 	super-ddf.o sha1.o crc32.o msg.o bitmap.o xmalloc.o \
--	platform-intel.o probe_roms.o crc32c.o
-+	platform-intel.o probe_roms.o crc32c.o drive_encryption.o
- 
- MON_SRCS = $(patsubst %.o,%.c,$(MON_OBJS))
- 
-diff --git a/drive_encryption.c b/drive_encryption.c
-new file mode 100644
-index 00000000..b44585a7
---- /dev/null
-+++ b/drive_encryption.c
-@@ -0,0 +1,362 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Read encryption information for Opal and ATA devices.
-+ *
-+ * Copyright (C) 2024 Intel Corporation
-+ *	Author: Blazej Kucman <blazej.kucman@intel.com>
-+ */
-+
-+#include "mdadm.h"
-+
-+#include <asm/types.h>
-+#include <linux/nvme_ioctl.h>
-+#include "drive_encryption.h"
-+
-+/*
-+ * Opal defines
-+ * TCG Storage Opal SSC 2.01 chapter 3.3.3
-+ * NVM ExpressTM Revision 1.4c, chapter 5
-+ */
-+#define TCG_SECP_01 (0x01)
-+#define TCG_SECP_00 (0x00)
-+#define OPAL_DISCOVERY_COMID (0x0001)
-+#define OPAL_LOCKING_FEATURE (0x0002)
-+#define OPAL_IO_BUFFER_LEN 2048
-+#define OPAL_DISCOVERY_FEATURE_HEADER_LEN (4)
-+
-+/*
-+ * NVMe defines
-+ * NVM ExpressTM Revision 1.4c, chapter 5
-+ */
-+#define NVME_SECURITY_RECV (0x82)
-+#define NVME_IDENTIFY (0x06)
-+#define NVME_IDENTIFY_RESPONSE_LEN 4096
-+#define NVME_OACS_BYTE_POSITION (256)
-+#define NVME_IDENTIFY_CONTROLLER_DATA (1)
-+
-+typedef enum drive_feature_support_status {
-+	/* Drive feature is supported. */
-+	DRIVE_FEAT_SUP_ST = 0,
-+	/* Drive feature is not supported. */
-+	DRIVE_FEAT_NOT_SUP_ST,
-+	/* Drive feature support check failed. */
-+	DRIVE_FEAT_CHECK_FAILED_ST
-+} drive_feat_sup_st;
-+
-+/* TCG Storage Opal SSC 2.01 chapter 3.1.1.3 */
-+typedef struct opal_locking_feature {
-+	/* feature header */
-+	__u16 feature_code;
-+	__u8 reserved : 4;
-+	__u8 version : 4;
-+	__u8 description_length;
-+	/* feature description */
-+	__u8 locking_supported : 1;
-+	__u8 locking_enabled : 1;
-+	__u8 locked : 1;
-+	__u8 media_encryption : 1;
-+	__u8 mbr_enabled : 1;
-+	__u8 mbr_done : 1;
-+	__u8 mbr_shadowing_not_supported : 1;
-+	__u8 hw_reset_for_dor_supported : 1;
-+	__u8 reserved1[11];
-+} __attribute__((__packed__)) opal_locking_feature_t;
-+
-+/* TCG Storage Opal SSC 2.01 chapter 3.1.1.1 */
-+typedef struct opal_level0_header {
-+	__u32 length;
-+	__u32 version;
-+	__u64 reserved;
-+	__u8 vendor_specific[32];
-+} opal_level0_header_t;
-+
-+/**
-+ * NVM ExpressTM Revision 1.4c, Figure 249
-+ * Structure specifies only OACS filed, which is needed in the current use case.
-+ */
-+typedef struct nvme_identify_ctrl {
-+	__u8 reserved[255];
-+	__u16 oacs;
-+	__u8 reserved2[3839];
-+} nvme_identify_ctrl_t;
-+
-+/* SCSI Primary Commands - 4 (SPC-4), Table 512 */
-+typedef struct supported_security_protocols {
-+	__u8  reserved[6];
-+	__u16 list_length;
-+	__u8  list[504];
-+} supported_security_protocols_t;
-+
-+/**
-+ * get_opal_locking_feature_description() - get opal locking feature description.
-+ * @response: response from Opal Discovery Level 0.
-+ *
-+ * Based on the documentation TCG Storage Opal SSC 2.01 chapter 3.1.1,
-+ * a Locking feature is searched for in Opal Level 0 Discovery response.
-+ *
-+ * Return: if locking feature is found, pointer to struct %opal_locking_feature_t, NULL otherwise.
-+ */
-+static opal_locking_feature_t *get_opal_locking_feature_description(__u8 *response)
-+{
-+	opal_level0_header_t *response_header = (opal_level0_header_t *)response;
-+	int features_length = __be32_to_cpu(response_header->length);
-+	int current_position = sizeof(*response_header);
-+
-+	while (current_position < features_length) {
-+		opal_locking_feature_t *feature;
-+
-+		feature = (opal_locking_feature_t *)(response + current_position);
-+
-+		if (__be16_to_cpu(feature->feature_code) == OPAL_LOCKING_FEATURE)
-+			return feature;
-+
-+		current_position += feature->description_length + OPAL_DISCOVERY_FEATURE_HEADER_LEN;
-+	}
-+
-+	return NULL;
-+}
-+
-+/**
-+ * nvme_security_recv_ioctl() - nvme security receive ioctl.
-+ * @disk_fd: a disk file descriptor.
-+ * @sec_protocol: security protocol.
-+ * @comm_id: command id.
-+ * @response_buffer: response buffer to fill out.
-+ * @buf_size: response buffer size.
-+ * @verbose: verbose flag.
-+ *
-+ * Based on the documentations TCG Storage Opal SSC 2.01 chapter 3.3.3 and
-+ * NVM ExpressTM Revision 1.4c, chapter 5.25,
-+ * read security receive command via ioctl().
-+ * On success, @response_buffer is completed.
-+ *
-+ * Return: %MDADM_STATUS_SUCCESS on success, %MDADM_STATUS_ERROR otherwise.
-+ */
-+static mdadm_status_t
-+nvme_security_recv_ioctl(int disk_fd, __u8 sec_protocol, __u16 comm_id, void *response_buffer,
-+			 size_t buf_size, const int verbose)
-+{
-+	struct nvme_admin_cmd nvme_cmd = {0};
-+	int status;
-+
-+	nvme_cmd.opcode = NVME_SECURITY_RECV;
-+	nvme_cmd.cdw10 = sec_protocol << 24 | comm_id << 8;
-+	nvme_cmd.cdw11 = buf_size;
-+	nvme_cmd.data_len = buf_size;
-+	nvme_cmd.addr = (__u64)response_buffer;
-+
-+	status = ioctl(disk_fd, NVME_IOCTL_ADMIN_CMD, &nvme_cmd);
-+	if (status != 0) {
-+		pr_vrb("Failed to read NVMe security receive ioctl() for device /dev/%s, status: %d\n",
-+		       fd2kname(disk_fd), status);
-+		return MDADM_STATUS_ERROR;
-+	}
-+
-+	return MDADM_STATUS_SUCCESS;
-+}
-+
-+/**
-+ * nvme_identify_ioctl() - NVMe identify ioctl.
-+ * @disk_fd: a disk file descriptor.
-+ * @response_buffer: response buffer to fill out.
-+ * @buf_size: response buffer size.
-+ * @verbose: verbose flag.
-+ *
-+ * Based on the documentations TCG Storage Opal SSC 2.01 chapter 3.3.3 and
-+ * NVM ExpressTM Revision 1.4c, chapter 5.25,
-+ * read NVMe identify via ioctl().
-+ * On success, @response_buffer will be completed.
-+ *
-+ * Return: %MDADM_STATUS_SUCCESS on success, %MDADM_STATUS_ERROR otherwise.
-+ */
-+static mdadm_status_t
-+nvme_identify_ioctl(int disk_fd, void *response_buffer, size_t buf_size, const int verbose)
-+{
-+	struct nvme_admin_cmd nvme_cmd = {0};
-+	int status;
-+
-+	nvme_cmd.opcode = NVME_IDENTIFY;
-+	nvme_cmd.cdw10 = NVME_IDENTIFY_CONTROLLER_DATA;
-+	nvme_cmd.data_len = buf_size;
-+	nvme_cmd.addr = (__u64)response_buffer;
-+
-+	status = ioctl(disk_fd, NVME_IOCTL_ADMIN_CMD, &nvme_cmd);
-+	if (status != 0) {
-+		pr_vrb("Failed to read NVMe identify ioctl() for device /dev/%s, status: %d\n",
-+		       fd2kname(disk_fd), status);
-+		return MDADM_STATUS_ERROR;
-+	}
-+
-+	return MDADM_STATUS_SUCCESS;
-+}
-+
-+/**
-+ * is_sec_prot_01h_supported() - check if security protocol 01h supported.
-+ * @security_protocols: struct with response from disk (NVMe, SATA) describing supported
-+ * security protocols.
-+ *
-+ * Return: true if TCG_SECP_01 found, false otherwise.
-+ */
-+static bool is_sec_prot_01h_supported(supported_security_protocols_t *security_protocols)
-+{
-+	int list_length = be16toh(security_protocols->list_length);
-+	int index;
-+
-+	for (index = 0 ; index < list_length; index++) {
-+		if (security_protocols->list[index] == TCG_SECP_01)
-+			return true;
-+	}
-+
-+	return false;
-+}
-+
-+/**
-+ * is_sec_prot_01h_supported_nvme() - check if security protocol 01h supported for given NVMe disk.
-+ * @disk_fd: a disk file descriptor.
-+ * @verbose: verbose flag.
-+ *
-+ * Return: %DRIVE_FEAT_SUP_ST if TCG_SECP_01 supported, %DRIVE_FEAT_NOT_SUP_ST if not supported,
-+ * %DRIVE_FEAT_CHECK_FAILED_ST if failed to check.
-+ */
-+static drive_feat_sup_st is_sec_prot_01h_supported_nvme(int disk_fd, const int verbose)
-+{
-+	supported_security_protocols_t security_protocols = {0};
-+
-+	/* security_protocol: TCG_SECP_00, comm_id: not applicable */
-+	if (nvme_security_recv_ioctl(disk_fd, TCG_SECP_00, 0x0, &security_protocols,
-+				     sizeof(security_protocols), verbose))
-+		return DRIVE_FEAT_CHECK_FAILED_ST;
-+
-+	if (is_sec_prot_01h_supported(&security_protocols))
-+		return DRIVE_FEAT_SUP_ST;
-+
-+	return DRIVE_FEAT_NOT_SUP_ST;
-+}
-+
-+/**
-+ * is_nvme_sec_send_recv_supported() - check if Security Send and Security Receive is supported.
-+ * @disk_fd: a disk file descriptor.
-+ * @verbose: verbose flag.
-+ *
-+ * Check if "Optional Admin Command Support" bit 0 is set in NVMe identify.
-+ * Bit 0 set to 1 means controller supports the Security Send and Security Receive commands.
-+ *
-+ * Return: %DRIVE_FEAT_SUP_ST if security send/receive supported,
-+ * %DRIVE_FEAT_NOT_SUP_ST if not supported, %DRIVE_FEAT_CHECK_FAILED_ST if check failed.
-+ */
-+static drive_feat_sup_st is_nvme_sec_send_recv_supported(int disk_fd, const int verbose)
-+{
-+	nvme_identify_ctrl_t nvme_identify = {0};
-+	int status = 0;
-+
-+	status = nvme_identify_ioctl(disk_fd, &nvme_identify, sizeof(nvme_identify), verbose);
-+	if (status)
-+		return DRIVE_FEAT_CHECK_FAILED_ST;
-+
-+	if ((__le16_to_cpu(nvme_identify.oacs) & 0x1) == 0x1)
-+		return DRIVE_FEAT_SUP_ST;
-+
-+	return DRIVE_FEAT_NOT_SUP_ST;
-+}
-+
-+/**
-+ * get_opal_encryption_information() - get Opal encryption information.
-+ * @buffer: buffer with Opal Level 0 Discovery response.
-+ * @information: struct to fill out, describing encryption status of disk.
-+ *
-+ * If Locking feature frame is in response from Opal Level 0 discovery, &encryption_information_t
-+ * structure is completed with status and ability otherwise the status is set to &None.
-+ * For possible encryption statuses and abilities,
-+ * please refer to enums &encryption_status and &encryption_ability.
-+ *
-+ * Return: %MDADM_STATUS_SUCCESS on success, %MDADM_STATUS_ERROR otherwise.
-+ */
-+static mdadm_status_t get_opal_encryption_information(__u8 *buffer,
-+						      encryption_information_t *information)
-+{
-+	opal_locking_feature_t *opal_locking_feature =
-+					get_opal_locking_feature_description(buffer);
-+
-+	if (!opal_locking_feature)
-+		return MDADM_STATUS_ERROR;
-+
-+	if (opal_locking_feature->locking_supported == 1) {
-+		information->ability = ENC_ABILITY_SED;
-+
-+		if (opal_locking_feature->locking_enabled == 0)
-+			information->status = ENC_STATUS_UNENCRYPTED;
-+		else if (opal_locking_feature->locked == 1)
-+			information->status = ENC_STATUS_LOCKED;
-+		else
-+			information->status = ENC_STATUS_UNLOCKED;
-+	} else {
-+		information->ability = ENC_ABILITY_NONE;
-+		information->status = ENC_STATUS_UNENCRYPTED;
-+	}
-+
-+	return MDADM_STATUS_SUCCESS;
-+}
-+
-+/**
-+ * get_nvme_opal_encryption_information() - get NVMe Opal encryption information.
-+ * @disk_fd: a disk file descriptor.
-+ * @information: struct to fill out, describing encryption status of disk.
-+ * @verbose: verbose flag.
-+ *
-+ * In case the disk supports Opal Level 0 discovery, &encryption_information_t structure
-+ * is completed with status and ability based on ioctl response,
-+ * otherwise the ability is set to %ENC_ABILITY_NONE and &status to %ENC_STATUS_UNENCRYPTED.
-+ * As the current use case does not need the knowledge of Opal support, if there is no support,
-+ * %MDADM_STATUS_SUCCESS will be returned, with the values described above.
-+ * For possible encryption statuses and abilities,
-+ * please refer to enums &encryption_status and &encryption_ability.
-+ *
-+ * %MDADM_STATUS_SUCCESS on success, %MDADM_STATUS_ERROR otherwise.
-+ */
-+mdadm_status_t
-+get_nvme_opal_encryption_information(int disk_fd, encryption_information_t *information,
-+				     const int verbose)
-+{
-+	__u8 buffer[OPAL_IO_BUFFER_LEN];
-+	int sec_send_recv_supported = 0;
-+	int protocol_01h_supported = 0;
-+	mdadm_status_t status;
-+
-+	information->ability = ENC_ABILITY_NONE;
-+	information->status = ENC_STATUS_UNENCRYPTED;
-+
-+	sec_send_recv_supported = is_nvme_sec_send_recv_supported(disk_fd, verbose);
-+	if (sec_send_recv_supported == DRIVE_FEAT_CHECK_FAILED_ST)
-+		return MDADM_STATUS_ERROR;
-+
-+	/* Opal not supported */
-+	if (sec_send_recv_supported == DRIVE_FEAT_NOT_SUP_ST)
-+		return MDADM_STATUS_SUCCESS;
-+
-+	/**
-+	 * sec_send_recv_supported determine that it should be possible to read
-+	 * supported sec protocols
-+	 */
-+	protocol_01h_supported = is_sec_prot_01h_supported_nvme(disk_fd, verbose);
-+	if (protocol_01h_supported == DRIVE_FEAT_CHECK_FAILED_ST)
-+		return MDADM_STATUS_ERROR;
-+
-+	/* Opal not supported */
-+	if (sec_send_recv_supported == DRIVE_FEAT_SUP_ST &&
-+	    protocol_01h_supported == DRIVE_FEAT_NOT_SUP_ST)
-+		return MDADM_STATUS_SUCCESS;
-+
-+	if (nvme_security_recv_ioctl(disk_fd, TCG_SECP_01, OPAL_DISCOVERY_COMID, (void *)&buffer,
-+				     OPAL_IO_BUFFER_LEN, verbose))
-+		return MDADM_STATUS_ERROR;
-+
-+	status = get_opal_encryption_information((__u8 *)&buffer, information);
-+	if (status)
-+		pr_vrb("Locking feature description not found in Level 0 discovery response. Device /dev/%s.\n",
-+		       fd2kname(disk_fd));
-+
-+	if (information->ability == ENC_ABILITY_NONE)
-+		assert(information->status == ENC_STATUS_UNENCRYPTED);
-+
-+	return status;
-+}
-diff --git a/drive_encryption.h b/drive_encryption.h
-new file mode 100644
-index 00000000..82c2c624
---- /dev/null
-+++ b/drive_encryption.h
-@@ -0,0 +1,32 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+/*
-+ * Read encryption information for Opal and ATA devices.
-+ *
-+ * Copyright (C) 2024 Intel Corporation
-+ *	Author: Blazej Kucman <blazej.kucman@intel.com>
-+ */
-+
-+typedef enum encryption_status {
-+	/* The drive is not currently encrypted. */
-+	ENC_STATUS_UNENCRYPTED = 0,
-+	/* The drive is encrypted and the data is not accessible. */
-+	ENC_STATUS_LOCKED,
-+	/* The drive is encrypted but the data is accessible in unencrypted form. */
-+	ENC_STATUS_UNLOCKED
-+} encryption_status_t;
-+
-+typedef enum encryption_ability {
-+	ENC_ABILITY_NONE = 0,
-+	ENC_ABILITY_OTHER,
-+	/* Self encrypted drive */
-+	ENC_ABILITY_SED
-+} encryption_ability_t;
-+
-+typedef struct encryption_information {
-+	encryption_ability_t ability;
-+	encryption_status_t status;
-+} encryption_information_t;
-+
-+mdadm_status_t
-+get_nvme_opal_encryption_information(int disk_fd, struct encryption_information *information,
-+				     const int verbose);
--- 
-2.41.0
-

0044-Add-reading-SATA-encryption-information.patch

@@ -1,459 +0,0 @@
-From df38df3052c3386c0fd076e0d534b4f688b5c8a4 Mon Sep 17 00:00:00 2001
-From: Blazej Kucman <blazej.kucman@intel.com>
-Date: Fri, 22 Mar 2024 12:51:17 +0100
-Subject: [PATCH 44/66] Add reading SATA encryption information
-
-Functionality reads information about SATA disk encryption. Technical
-documentation used is given in the implementation.
-
-The implementation is able to recognized two encryption standards for SATA
-drives, OPAL and ATA security.
-
-If the SATA drive supports OPAL, encryption status and ability are
-determined based on Opal Level 0 discovery response, for ATA security,
-based on ATA identify response. If SATA supports OPAL, ability is set to
-"SED", for ATA security to "Other".
-
-SED(Self-Encrypting Drive) is commonly used to describe drive which using
-OPAL or Enterprise standards developed by Trusted Computing Group. Ability
-"Other" is used for ATA security because we rely only on information from
-ATA identify which describe the overall state of encryption.
-
-It is allowed to mix disks with different encryption ability such as "SED"
-and "Other" and it is not security gap.
-
-Motivation for adding this functionality is to block mixing of disks in
-IMSM arrays with encryption enabled and disabled. The main goal is to not
-allow stealing data by rebuilding array to not encrypted drive which can be
-read elsewhere.
-
-For SATA Opal drives, libata allow_tmp parameter enabled is required, which
-is necessary for Opal Security commands to work, therefore, if the
-parameter is not enabled, SATA Opal disk cannot be used in case the
-encryption will be checked by metadata.
-
-Implemented functions will be used in one of the next patches. In one of
-the next patches, a flag will be added to enable disabling SATA Opal
-encryption checking due to allow_tpm kernel setting dependency.
-
-Signed-off-by: Blazej Kucman <blazej.kucman@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- drive_encryption.c | 318 +++++++++++++++++++++++++++++++++++++++++++++
- drive_encryption.h |   3 +
- mdadm.h            |   1 +
- sysfs.c            |  29 +++++
- 4 files changed, 351 insertions(+)
-
-diff --git a/drive_encryption.c b/drive_encryption.c
-index b44585a7..d520f0c7 100644
---- a/drive_encryption.c
-+++ b/drive_encryption.c
-@@ -10,8 +10,12 @@
- 
- #include <asm/types.h>
- #include <linux/nvme_ioctl.h>
-+#include <scsi/sg.h>
-+#include <scsi/scsi.h>
- #include "drive_encryption.h"
- 
-+#define DEFAULT_SECTOR_SIZE (512)
-+
- /*
-  * Opal defines
-  * TCG Storage Opal SSC 2.01 chapter 3.3.3
-@@ -34,6 +38,35 @@
- #define NVME_OACS_BYTE_POSITION (256)
- #define NVME_IDENTIFY_CONTROLLER_DATA (1)
- 
-+/*
-+ * ATA defines
-+ * ATA/ATAPI Command Set ATA8-ACS
-+ * SCSI / ATA Translation - 3 (SAT-3)
-+ * SCSI Primary Commands - 4 (SPC-4)
-+ * AT Attachment-8 - ATA Serial Transport (ATA8-AST)
-+ * ATA Command Pass-Through
-+ */
-+#define ATA_IDENTIFY (0xec)
-+#define ATA_TRUSTED_RECEIVE (0x5c)
-+#define ATA_SECURITY_WORD_POSITION (128)
-+#define HDIO_DRIVE_CMD (0x031f)
-+#define ATA_TRUSTED_COMPUTING_POS (48)
-+#define ATA_PASS_THROUGH_12 (0xa1)
-+#define ATA_IDENTIFY_RESPONSE_LEN (512)
-+#define ATA_PIO_DATA_IN (4)
-+#define SG_CHECK_CONDITION (0x02)
-+#define ATA_STATUS_RETURN_DESCRIPTOR (0x09)
-+#define ATA_PT_INFORMATION_AVAILABLE_ASCQ (0x1d)
-+#define ATA_PT_INFORMATION_AVAILABLE_ASC (0x00)
-+#define ATA_INQUIRY_LENGTH (0x0c)
-+#define SG_INTERFACE_ID 'S'
-+#define SG_IO_TIMEOUT (60000)
-+#define SG_SENSE_SIZE (32)
-+#define SENSE_DATA_CURRENT_FIXED (0x70)
-+#define SENSE_DATA_CURRENT_DESC (0x72)
-+#define SENSE_CURRENT_RES_DESC_POS (8)
-+#define SG_DRIVER_SENSE	(0x08)
-+
- typedef enum drive_feature_support_status {
- 	/* Drive feature is supported. */
- 	DRIVE_FEAT_SUP_ST = 0,
-@@ -87,6 +120,27 @@ typedef struct supported_security_protocols {
- 	__u8  list[504];
- } supported_security_protocols_t;
- 
-+/* ATA/ATAPI Command Set - 3 (ACS-3), Table 45 */
-+typedef struct ata_security_status {
-+	__u16 security_supported : 1;
-+	__u16 security_enabled : 1;
-+	__u16 security_locked : 1;
-+	__u16 security_frozen : 1;
-+	__u16 security_count_expired : 1;
-+	__u16 enhanced_security_erase_supported : 1;
-+	__u16 reserved1 : 2;
-+	__u16 security_level : 1;
-+	__u16 reserved2 : 7;
-+} __attribute__((__packed__)) ata_security_status_t;
-+
-+/* ATA/ATAPI Command Set - 3 (ACS-3), Table 45 */
-+typedef struct ata_trusted_computing {
-+	__u16 tc_feature :1;
-+	__u16 reserved : 13;
-+	__u16 var1 : 1;
-+	__u16 var2 : 1;
-+} __attribute__((__packed__)) ata_trusted_computing_t;
-+
- /**
-  * get_opal_locking_feature_description() - get opal locking feature description.
-  * @response: response from Opal Discovery Level 0.
-@@ -360,3 +414,267 @@ get_nvme_opal_encryption_information(int disk_fd, encryption_information_t *info
- 
- 	return status;
- }
-+
-+/**
-+ * ata_pass_through12_ioctl() - ata pass through12 ioctl.
-+ * @disk_fd: a disk file descriptor.
-+ * @ata_command: ata command.
-+ * @sec_protocol: security protocol.
-+ * @comm_id: additional command id.
-+ * @response_buffer: response buffer to fill out.
-+ * @buf_size: response buffer size.
-+ * @verbose: verbose flag.
-+ *
-+ * Based on the documentations ATA Command Pass-Through, chapter 13.2.2 and
-+ * ATA Translation - 3 (SAT-3), send read ata pass through 12 command via ioctl().
-+ * On success, @response_buffer will be completed.
-+ *
-+ * Return: %MDADM_STATUS_SUCCESS on success, %MDADM_STATUS_ERROR on fail.
-+ */
-+static mdadm_status_t
-+ata_pass_through12_ioctl(int disk_fd, __u8 ata_command,  __u8 sec_protocol, __u16 comm_id,
-+			 void *response_buffer, size_t buf_size, const int verbose)
-+{
-+	__u8 cdb[ATA_INQUIRY_LENGTH] = {0};
-+	__u8 sense[SG_SENSE_SIZE] = {0};
-+	__u8 *sense_desc = NULL;
-+	sg_io_hdr_t sg = {0};
-+
-+	/*
-+	 * ATA Command Pass-Through, chapter 13.2.2
-+	 * SCSI Primary Commands - 4 (SPC-4)
-+	 * ATA Translation - 3 (SAT-3)
-+	 */
-+	cdb[0] = ATA_PASS_THROUGH_12;
-+	/* protocol, bits 1-4 */
-+	cdb[1] = ATA_PIO_DATA_IN << 1;
-+	/* Bytes: CK_COND=1, T_DIR = 1, BYTE_BLOCK = 1, Length in Sector Count = 2 */
-+	cdb[2] = 0x2E;
-+	cdb[3] = sec_protocol;
-+	/* Sector count */
-+	cdb[4] = buf_size / DEFAULT_SECTOR_SIZE;
-+	cdb[6] = (comm_id) & 0xFF;
-+	cdb[7] = (comm_id >> 8) & 0xFF;
-+	cdb[9] = ata_command;
-+
-+	sg.interface_id = SG_INTERFACE_ID;
-+	sg.cmd_len = sizeof(cdb);
-+	sg.mx_sb_len = sizeof(sense);
-+	sg.dxfer_direction = SG_DXFER_FROM_DEV;
-+	sg.dxfer_len = buf_size;
-+	sg.dxferp = response_buffer;
-+	sg.cmdp = cdb;
-+	sg.sbp = sense;
-+	sg.timeout = SG_IO_TIMEOUT;
-+	sg.usr_ptr = NULL;
-+
-+	if (ioctl(disk_fd, SG_IO, &sg) < 0) {
-+		pr_vrb("Failed ata passthrough12 ioctl. Device: /dev/%s.\n", fd2kname(disk_fd));
-+		return MDADM_STATUS_ERROR;
-+	}
-+
-+	if ((sg.status && sg.status != SG_CHECK_CONDITION) || sg.host_status ||
-+	    (sg.driver_status && sg.driver_status != SG_DRIVER_SENSE)) {
-+		pr_vrb("Failed ata passthrough12 ioctl. Device: /dev/%s.\n", fd2kname(disk_fd));
-+		pr_vrb("SG_IO error: ATA_12 Status: %d Host Status: %d, Driver Status: %d\n",
-+		       sg.status, sg.host_status, sg.driver_status);
-+		return MDADM_STATUS_ERROR;
-+	}
-+
-+	/* verify expected sense response code */
-+	if (!(sense[0] == SENSE_DATA_CURRENT_DESC || sense[0] == SENSE_DATA_CURRENT_FIXED)) {
-+		pr_vrb("Failed ata passthrough12 ioctl. Device: /dev/%s.\n", fd2kname(disk_fd));
-+		return MDADM_STATUS_ERROR;
-+	}
-+
-+	sense_desc = sense + SENSE_CURRENT_RES_DESC_POS;
-+	/* verify sense data current response with descriptor format */
-+	if (sense[0] == SENSE_DATA_CURRENT_DESC &&
-+	    !(sense_desc[0] == ATA_STATUS_RETURN_DESCRIPTOR &&
-+	    sense_desc[1] == ATA_INQUIRY_LENGTH)) {
-+		pr_vrb("Failed ata passthrough12 ioctl. Device: /dev/%s. Sense data ASC: %d, ASCQ: %d.\n",
-+		       fd2kname(disk_fd), sense[2], sense[3]);
-+		return MDADM_STATUS_ERROR;
-+	}
-+
-+	/* verify sense data current response with fixed format */
-+	if (sense[0] == SENSE_DATA_CURRENT_FIXED &&
-+	    !(sense[12] == ATA_PT_INFORMATION_AVAILABLE_ASC &&
-+	    sense[13] == ATA_PT_INFORMATION_AVAILABLE_ASCQ)) {
-+		pr_vrb("Failed ata passthrough12 ioctl. Device: /dev/%s. Sense data ASC: %d, ASCQ: %d.\n",
-+		       fd2kname(disk_fd), sense[12], sense[13]);
-+		return MDADM_STATUS_ERROR;
-+	}
-+
-+	return MDADM_STATUS_SUCCESS;
-+}
-+
-+/**
-+ * is_sec_prot_01h_supported_ata() - check if security protocol 01h supported for given SATA disk.
-+ * @disk_fd: a disk file descriptor.
-+ * @verbose: verbose flag.
-+ *
-+ * Return: %DRIVE_FEAT_SUP_ST if TCG_SECP_01 supported, %DRIVE_FEAT_NOT_SUP_ST if not supported,
-+ * %DRIVE_FEAT_CHECK_FAILED_ST if failed.
-+ */
-+static drive_feat_sup_st is_sec_prot_01h_supported_ata(int disk_fd, const int verbose)
-+{
-+	supported_security_protocols_t security_protocols;
-+
-+	mdadm_status_t result = ata_pass_through12_ioctl(disk_fd, ATA_TRUSTED_RECEIVE, TCG_SECP_00,
-+							 0x0, &security_protocols,
-+							 sizeof(security_protocols), verbose);
-+	if (result)
-+		return DRIVE_FEAT_CHECK_FAILED_ST;
-+
-+	if (is_sec_prot_01h_supported(&security_protocols))
-+		return DRIVE_FEAT_SUP_ST;
-+
-+	return DRIVE_FEAT_NOT_SUP_ST;
-+}
-+
-+/**
-+ * is_ata_trusted_computing_supported() - check if ata trusted computing supported.
-+ * @buffer: buffer with ATA identify response, not NULL.
-+ *
-+ * Return: true if trusted computing bit set, false otherwise.
-+ */
-+bool is_ata_trusted_computing_supported(__u16 *buffer)
-+{
-+	/* Added due to warnings from the compiler about a possible uninitialized variable below. */
-+	assert(buffer);
-+
-+	__u16 security_tc_frame = __le16_to_cpu(buffer[ATA_TRUSTED_COMPUTING_POS]);
-+	ata_trusted_computing_t *security_tc = (ata_trusted_computing_t *)&security_tc_frame;
-+
-+	if (security_tc->tc_feature == 1)
-+		return true;
-+
-+	return false;
-+}
-+
-+/**
-+ * get_ata_standard_security_status() - get ATA disk encryption information from ATA identify.
-+ * @buffer: buffer with response from ATA identify, not NULL.
-+ * @information: struct to fill out, describing encryption status of disk.
-+ *
-+ * The function based on the Security status frame from ATA identify,
-+ * completed encryption information.
-+ * For possible encryption statuses and abilities,
-+ * please refer to enums &encryption_status and &encryption_ability.
-+ *
-+ * Return: %MDADM_STATUS_SUCCESS on success, %MDADM_STATUS_ERROR on fail.
-+ */
-+static mdadm_status_t get_ata_standard_security_status(__u16 *buffer,
-+						       struct encryption_information *information)
-+{
-+	/* Added due to warnings from the compiler about a possible uninitialized variable below. */
-+	assert(buffer);
-+
-+	__u16 security_status_frame = __le16_to_cpu(buffer[ATA_SECURITY_WORD_POSITION]);
-+	ata_security_status_t *security_status = (ata_security_status_t *)&security_status_frame;
-+
-+	if (!security_status->security_supported) {
-+		information->ability = ENC_ABILITY_NONE;
-+		information->status = ENC_STATUS_UNENCRYPTED;
-+
-+		return MDADM_STATUS_SUCCESS;
-+	}
-+
-+	information->ability = ENC_ABILITY_OTHER;
-+
-+	if (security_status->security_enabled == 0)
-+		information->status = ENC_STATUS_UNENCRYPTED;
-+	else if (security_status->security_locked == 1)
-+		information->status = ENC_STATUS_LOCKED;
-+	else
-+		information->status = ENC_STATUS_UNLOCKED;
-+
-+	return MDADM_STATUS_SUCCESS;
-+}
-+
-+/**
-+ * is_ata_opal() - check if SATA disk support Opal.
-+ * @disk_fd: a disk file descriptor.
-+ * @buffer: buffer with ATA identify response.
-+ * @verbose: verbose flag.
-+ *
-+ * Return: %DRIVE_FEAT_SUP_ST if TCG_SECP_01 supported, %DRIVE_FEAT_NOT_SUP_ST if not supported,
-+ * %DRIVE_FEAT_CHECK_FAILED_ST if failed to check.
-+ */
-+static drive_feat_sup_st is_ata_opal(int disk_fd, __u16 *buffer_identify, const int verbose)
-+{
-+	bool tc_status = is_ata_trusted_computing_supported(buffer_identify);
-+	drive_feat_sup_st tcg_sec_prot_status;
-+
-+	if (!tc_status)
-+		return DRIVE_FEAT_NOT_SUP_ST;
-+
-+	tcg_sec_prot_status = is_sec_prot_01h_supported_ata(disk_fd, verbose);
-+
-+	if (tcg_sec_prot_status == DRIVE_FEAT_CHECK_FAILED_ST) {
-+		pr_vrb("Failed to verify if security protocol 01h supported. Device /dev/%s.\n",
-+		       fd2kname(disk_fd));
-+		return DRIVE_FEAT_CHECK_FAILED_ST;
-+	}
-+
-+	if (tc_status && tcg_sec_prot_status == DRIVE_FEAT_SUP_ST)
-+		return DRIVE_FEAT_SUP_ST;
-+
-+	return DRIVE_FEAT_NOT_SUP_ST;
-+}
-+
-+/**
-+ * get_ata_encryption_information() - get ATA disk encryption information.
-+ * @disk_fd: a disk file descriptor.
-+ * @information: struct to fill out, describing encryption status of disk.
-+ * @verbose: verbose flag.
-+ *
-+ * The function reads information about encryption, if the disk supports Opal,
-+ * the information is completed based on Opal Level 0 discovery, otherwise,
-+ * based on ATA security status frame from ATA identification response.
-+ * For possible encryption statuses and abilities,
-+ * please refer to enums &encryption_status and &encryption_ability.
-+ *
-+ * Based on the documentations ATA/ATAPI Command Set ATA8-ACS and
-+ * AT Attachment-8 - ATA Serial Transport (ATA8-AST).
-+ *
-+ * Return: %MDADM_STATUS_SUCCESS on success, %MDADM_STATUS_ERROR on fail.
-+ */
-+mdadm_status_t
-+get_ata_encryption_information(int disk_fd, struct encryption_information *information,
-+			       const int verbose)
-+{
-+	__u8 buffer_opal_level0_discovery[OPAL_IO_BUFFER_LEN] = {0};
-+	__u16 buffer_identify[ATA_IDENTIFY_RESPONSE_LEN] = {0};
-+	drive_feat_sup_st ata_opal_status;
-+	mdadm_status_t status;
-+
-+	/* Get disk ATA identification */
-+	status = ata_pass_through12_ioctl(disk_fd, ATA_IDENTIFY, 0x0, 0x0, buffer_identify,
-+					  sizeof(buffer_identify), verbose);
-+	if (status == MDADM_STATUS_ERROR)
-+		return MDADM_STATUS_ERROR;
-+
-+	if (is_ata_trusted_computing_supported(buffer_identify) &&
-+	    !sysfs_is_libata_allow_tpm_enabled(verbose)) {
-+		pr_vrb("For SATA with Trusted Computing support, required libata.tpm_enabled=1.\n");
-+		return MDADM_STATUS_ERROR;
-+	}
-+
-+	ata_opal_status = is_ata_opal(disk_fd, buffer_identify, verbose);
-+	if (ata_opal_status == DRIVE_FEAT_CHECK_FAILED_ST)
-+		return MDADM_STATUS_ERROR;
-+
-+	if (ata_opal_status == DRIVE_FEAT_NOT_SUP_ST)
-+		return get_ata_standard_security_status(buffer_identify, information);
-+
-+	/* SATA Opal */
-+	status = ata_pass_through12_ioctl(disk_fd, ATA_TRUSTED_RECEIVE, TCG_SECP_01,
-+					  OPAL_DISCOVERY_COMID, buffer_opal_level0_discovery,
-+					  OPAL_IO_BUFFER_LEN, verbose);
-+	if (status != MDADM_STATUS_SUCCESS)
-+		return MDADM_STATUS_ERROR;
-+
-+	return get_opal_encryption_information(buffer_opal_level0_discovery, information);
-+}
-diff --git a/drive_encryption.h b/drive_encryption.h
-index 82c2c624..77c7f10f 100644
---- a/drive_encryption.h
-+++ b/drive_encryption.h
-@@ -30,3 +30,6 @@ typedef struct encryption_information {
- mdadm_status_t
- get_nvme_opal_encryption_information(int disk_fd, struct encryption_information *information,
- 				     const int verbose);
-+mdadm_status_t
-+get_ata_encryption_information(int disk_fd, struct encryption_information *information,
-+			       const int verbose);
-diff --git a/mdadm.h b/mdadm.h
-index fbb161ba..52a66b9a 100644
---- a/mdadm.h
-+++ b/mdadm.h
-@@ -853,6 +853,7 @@ extern int restore_stripes(int *dest, unsigned long long *offsets,
- 			   int source, unsigned long long read_offset,
- 			   unsigned long long start, unsigned long long length,
- 			   char *src_buf);
-+extern bool sysfs_is_libata_allow_tpm_enabled(const int verbose);
- 
- #ifndef Sendmail
- #define Sendmail "/usr/lib/sendmail -t"
-diff --git a/sysfs.c b/sysfs.c
-index 4ded1672..20fe1e9e 100644
---- a/sysfs.c
-+++ b/sysfs.c
-@@ -1121,3 +1121,32 @@ void sysfsline(char *line)
- 	sr->next = sysfs_rules;
- 	sysfs_rules = sr;
- }
-+
-+/**
-+ * sysfs_is_libata_allow_tpm_enabled() - check if libata allow_tmp is enabled.
-+ * @verbose: verbose flag.
-+ *
-+ * Check if libata allow_tmp flag is set, this is required for SATA Opal Security commands to work.
-+ *
-+ * Return: true if allow_tpm enable, false otherwise.
-+ */
-+bool sysfs_is_libata_allow_tpm_enabled(const int verbose)
-+{
-+	const char *path = "/sys/module/libata/parameters/allow_tpm";
-+	const char *expected_value = "1";
-+	int fd = open(path, O_RDONLY);
-+	char buf[3];
-+
-+	if (!is_fd_valid(fd)) {
-+		pr_vrb("Failed open file descriptor to %s. Cannot check libata allow_tpm param.\n",
-+		       path);
-+		return false;
-+	}
-+
-+	sysfs_fd_get_str(fd, buf, sizeof(buf));
-+	close(fd);
-+
-+	if (strncmp(buf, expected_value, 1) == 0)
-+		return true;
-+	return false;
-+}
--- 
-2.41.0
-

0045-Add-key-ENCRYPTION_NO_VERIFY-to-conf.patch

@@ -1,163 +0,0 @@
-From 336e13fc5ef43bc5b4633a9dadac5f7208e6c241 Mon Sep 17 00:00:00 2001
-From: Blazej Kucman <blazej.kucman@intel.com>
-Date: Fri, 22 Mar 2024 12:51:18 +0100
-Subject: [PATCH 45/66] Add key ENCRYPTION_NO_VERIFY to conf
-
-Add ENCRYPTION_NO_VERIFY config key and allow to disable checking
-encryption status for given type of drives.
-
-The key is introduced because of SATA Opal disks for which TPM commands
-must be enabled in libata kernel module, (libata.allow_tpm=1), otherwise
-it is impossible to verify encryption status. TPM commands are disabled by
-default.
-
-Currently the key only supports the "sata_opal" value, if necessary,
-the functionality is ready to support more types of disks. This
-functionality will be used in the next patches.
-
-Signed-off-by: Blazej Kucman <blazej.kucman@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- config.c           | 25 ++++++++++++++++++++++++-
- drive_encryption.c | 16 ++++++++++++----
- mdadm.conf.5.in    | 13 +++++++++++++
- mdadm.h            |  1 +
- 4 files changed, 50 insertions(+), 5 deletions(-)
-
-diff --git a/config.c b/config.c
-index 44f7dd2f..b46d71cb 100644
---- a/config.c
-+++ b/config.c
-@@ -81,7 +81,7 @@ char DefaultAltConfDir[] = CONFFILE2 ".d";
- 
- enum linetype { Devices, Array, Mailaddr, Mailfrom, Program, CreateDev,
- 		Homehost, HomeCluster, AutoMode, Policy, PartPolicy, Sysfs,
--		MonitorDelay, LTEnd };
-+		MonitorDelay, EncryptionNoVerify, LTEnd };
- char *keywords[] = {
- 	[Devices]  = "devices",
- 	[Array]    = "array",
-@@ -96,6 +96,7 @@ char *keywords[] = {
- 	[PartPolicy]="part-policy",
- 	[Sysfs]    = "sysfs",
- 	[MonitorDelay] = "monitordelay",
-+	[EncryptionNoVerify] = "ENCRYPTION_NO_VERIFY",
- 	[LTEnd]    = NULL
- };
- 
-@@ -729,6 +730,19 @@ void monitordelayline(char *line)
- 	}
- }
- 
-+static bool sata_opal_encryption_no_verify;
-+void encryption_no_verify_line(char *line)
-+{
-+	char *word;
-+
-+	for (word = dl_next(line); word != line; word = dl_next(word)) {
-+		if (strcasecmp(word, "sata_opal") == 0)
-+			sata_opal_encryption_no_verify = true;
-+		else
-+			pr_err("unrecognised word on ENCRYPTION_NO_VERIFY line: %s\n", word);
-+	}
-+}
-+
- char auto_yes[] = "yes";
- char auto_no[] = "no";
- char auto_homehost[] = "homehost";
-@@ -913,6 +927,9 @@ void conf_file(FILE *f)
- 		case MonitorDelay:
- 			monitordelayline(line);
- 			break;
-+		case EncryptionNoVerify:
-+			encryption_no_verify_line(line);
-+			break;
- 		default:
- 			pr_err("Unknown keyword %s\n", line);
- 		}
-@@ -1075,6 +1092,12 @@ int conf_get_monitor_delay(void)
- 	return monitor_delay;
- }
- 
-+bool conf_get_sata_opal_encryption_no_verify(void)
-+{
-+	load_conffile();
-+	return sata_opal_encryption_no_verify;
-+}
-+
- struct createinfo *conf_get_create_info(void)
- {
- 	load_conffile();
-diff --git a/drive_encryption.c b/drive_encryption.c
-index d520f0c7..6b2bd358 100644
---- a/drive_encryption.c
-+++ b/drive_encryption.c
-@@ -656,10 +656,18 @@ get_ata_encryption_information(int disk_fd, struct encryption_information *infor
- 	if (status == MDADM_STATUS_ERROR)
- 		return MDADM_STATUS_ERROR;
- 
--	if (is_ata_trusted_computing_supported(buffer_identify) &&
--	    !sysfs_is_libata_allow_tpm_enabled(verbose)) {
--		pr_vrb("For SATA with Trusted Computing support, required libata.tpm_enabled=1.\n");
--		return MDADM_STATUS_ERROR;
-+	/* Possible OPAL support, further checks require tpm_enabled.*/
-+	if (is_ata_trusted_computing_supported(buffer_identify)) {
-+		/* OPAL SATA encryption checking disabled. */
-+		if (conf_get_sata_opal_encryption_no_verify())
-+			return MDADM_STATUS_SUCCESS;
-+
-+		if (!sysfs_is_libata_allow_tpm_enabled(verbose)) {
-+			pr_vrb("Detected SATA drive /dev/%s with Trusted Computing support.\n",
-+			       fd2kname(disk_fd));
-+			pr_vrb("Cannot verify encryption state. Requires libata.tpm_enabled=1.\n");
-+			return MDADM_STATUS_ERROR;
-+		}
- 	}
- 
- 	ata_opal_status = is_ata_opal(disk_fd, buffer_identify, verbose);
-diff --git a/mdadm.conf.5.in b/mdadm.conf.5.in
-index 787e51e9..afb0a296 100644
---- a/mdadm.conf.5.in
-+++ b/mdadm.conf.5.in
-@@ -636,6 +636,17 @@ If multiple
- .B MINITORDELAY
- lines are provided, only first non-zero value is considered.
- 
-+.TP
-+.B ENCRYPTION_NO_VERIFY
-+The
-+.B ENCRYPTION_NO_VERIFY
-+disables encryption verification for devices with particular encryption support detected.
-+Currently, only verification of SATA OPAL encryption can be disabled.
-+It does not disable ATA security encryption verification.
-+Available parameter
-+.I "sata_opal".
-+
-+
- .SH FILES
- 
- .SS {CONFFILE}
-@@ -744,6 +755,8 @@ SYSFS uuid=bead5eb6:31c17a27:da120ba2:7dfda40d group_thread_cnt=4
- sync_speed_max=1000000
- .br
- MONITORDELAY 60
-+.br
-+ENCRYPTION_NO_VERIFY sata_opal
- 
- .SH SEE ALSO
- .BR mdadm (8),
-diff --git a/mdadm.h b/mdadm.h
-index 52a66b9a..2640b396 100644
---- a/mdadm.h
-+++ b/mdadm.h
-@@ -1673,6 +1673,7 @@ extern char *conf_get_program(void);
- extern char *conf_get_homehost(int *require_homehostp);
- extern char *conf_get_homecluster(void);
- extern int conf_get_monitor_delay(void);
-+extern bool conf_get_sata_opal_encryption_no_verify(void);
- extern char *conf_line(FILE *file);
- extern char *conf_word(FILE *file, int allow_key);
- extern void print_quoted(char *str);
--- 
-2.41.0
-

0046-imsm-print-disk-encryption-information.patch

@@ -1,217 +0,0 @@
-From bf62ed5d9642aa60abf4ac2d1d89f173bd66ae48 Mon Sep 17 00:00:00 2001
-From: Blazej Kucman <blazej.kucman@intel.com>
-Date: Fri, 22 Mar 2024 12:51:19 +0100
-Subject: [PATCH 46/66] imsm: print disk encryption information
-
-Print SATA/NVMe disk encryption information in --detail-platform.
-Encryption Ability and Status will be printed for each disk.
-
-There is one exception, Opal SATA drives encryption is not checked when
-ENCRYPTION_NO_VERIFY key with "sata_opal" value is set in conf, for this
-reason such drives are treated as without encryption support.
-
-To test this feature, drives SATA/NVMe with Opal support or SATA drives
-with encryption support have to be used.
-
-Example outputs of --detail-platform:
-
-Non Opal, encryption enabled, SATA drive:
-Port0 : /dev/sdc (CVPR050600G3120LGN)
-        Encryption(Ability|Status): Other|Unlocked
-
-NVMe drive without Opal support:
-NVMe under VMD : /dev/nvme2n1 (PHLF737302GB1P0GGN)
-        Encryption(Ability|Status): None|Unencrypted
-
-Unencrypted SATA drive with OPAL support:
-
-- default allow_tpm, we will get an error from mdadm:
-          Port6 : /dev/sdi (CVTS4246015V180IGN)
-mdadm: Detected SATA drive /dev/sdi with Trusted Computing support.
-mdadm: Cannot verify encryption state. Requires libata.tpm_enabled=1.
-mdadm: Failed to get drive encrytpion information.
-
--  default "allow_tpm" and config entry "ENCRYPTION_NO_VERIFY sata_opal":
-Port6 : /dev/sdi (CVTS4246015V180IGN)
-        Encryption(Ability|Status): None|Unencrypted
-
-- added "libata.allow_tpm=1" to boot parameters(requires reboot),
-the status will be read correctly:
-Port6 : /dev/sdi (CVTS4246015V180IGN)
-        Encryption(Ability|Status): SED|Unencrypted
-
-Signed-off-by: Blazej Kucman <blazej.kucman@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- drive_encryption.c | 36 ++++++++++++++++++++++++++++++++++++
- drive_encryption.h |  2 ++
- mdadm.conf.5.in    |  3 +++
- super-intel.c      | 42 ++++++++++++++++++++++++++++++++++++++----
- 4 files changed, 79 insertions(+), 4 deletions(-)
-
-diff --git a/drive_encryption.c b/drive_encryption.c
-index 6b2bd358..27da9621 100644
---- a/drive_encryption.c
-+++ b/drive_encryption.c
-@@ -141,6 +141,42 @@ typedef struct ata_trusted_computing {
- 	__u16 var2 : 1;
- } __attribute__((__packed__)) ata_trusted_computing_t;
- 
-+mapping_t encryption_ability_map[] = {
-+	{ "None", ENC_ABILITY_NONE },
-+	{ "Other", ENC_ABILITY_OTHER },
-+	{ "SED", ENC_ABILITY_SED },
-+	{ NULL, UnSet }
-+};
-+
-+mapping_t encryption_status_map[] = {
-+	{ "Unencrypted", ENC_STATUS_UNENCRYPTED },
-+	{ "Locked", ENC_STATUS_LOCKED },
-+	{ "Unlocked", ENC_STATUS_UNLOCKED },
-+	{ NULL, UnSet }
-+};
-+
-+/**
-+ * get_encryption_ability_string() - get encryption ability name string.
-+ * @ability: encryption ability enum.
-+ *
-+ * Return: encryption ability string.
-+ */
-+const char *get_encryption_ability_string(enum encryption_ability ability)
-+{
-+	return map_num_s(encryption_ability_map, ability);
-+}
-+
-+/**
-+ * get_encryption_status_string() - get encryption status name string.
-+ * @ability: encryption status enum.
-+ *
-+ * Return: encryption status string.
-+ */
-+const char *get_encryption_status_string(enum encryption_status status)
-+{
-+	return map_num_s(encryption_status_map, status);
-+}
-+
- /**
-  * get_opal_locking_feature_description() - get opal locking feature description.
-  * @response: response from Opal Discovery Level 0.
-diff --git a/drive_encryption.h b/drive_encryption.h
-index 77c7f10f..0cb8ff1b 100644
---- a/drive_encryption.h
-+++ b/drive_encryption.h
-@@ -33,3 +33,5 @@ get_nvme_opal_encryption_information(int disk_fd, struct encryption_information
- mdadm_status_t
- get_ata_encryption_information(int disk_fd, struct encryption_information *information,
- 			       const int verbose);
-+const char *get_encryption_ability_string(enum encryption_ability ability);
-+const char *get_encryption_status_string(enum encryption_status status);
-diff --git a/mdadm.conf.5.in b/mdadm.conf.5.in
-index afb0a296..14302a91 100644
---- a/mdadm.conf.5.in
-+++ b/mdadm.conf.5.in
-@@ -643,6 +643,9 @@ The
- disables encryption verification for devices with particular encryption support detected.
- Currently, only verification of SATA OPAL encryption can be disabled.
- It does not disable ATA security encryption verification.
-+Currently effective only for
-+.I IMSM
-+metadata.
- Available parameter
- .I "sata_opal".
- 
-diff --git a/super-intel.c b/super-intel.c
-index 212387ec..fbd1c11f 100644
---- a/super-intel.c
-+++ b/super-intel.c
-@@ -27,6 +27,7 @@
- #include <scsi/sg.h>
- #include <ctype.h>
- #include <dirent.h>
-+#include "drive_encryption.h"
- 
- /* MPB == Metadata Parameter Block */
- #define MPB_SIGNATURE "Intel Raid ISM Cfg Sig. "
-@@ -2349,12 +2350,41 @@ static int imsm_read_serial(int fd, char *devname, __u8 *serial,
- 			    size_t serial_buf_len);
- static void fd2devname(int fd, char *name);
- 
--static int ahci_enumerate_ports(const char *hba_path, int port_count, int host_base, int verbose)
-+void print_encryption_information(int disk_fd, enum sys_dev_type hba_type)
-+{
-+	struct encryption_information information = {0};
-+	mdadm_status_t status = MDADM_STATUS_SUCCESS;
-+	const char *indent = "                  ";
-+
-+	switch (hba_type) {
-+	case SYS_DEV_VMD:
-+	case SYS_DEV_NVME:
-+		status = get_nvme_opal_encryption_information(disk_fd, &information, 1);
-+		break;
-+	case SYS_DEV_SATA:
-+	case SYS_DEV_SATA_VMD:
-+		status = get_ata_encryption_information(disk_fd, &information, 1);
-+		break;
-+	default:
-+		return;
-+	}
-+
-+	if (status) {
-+		pr_err("Failed to get drive encryption information.\n");
-+		return;
-+	}
-+
-+	printf("%sEncryption(Ability|Status): %s|%s\n", indent,
-+	       get_encryption_ability_string(information.ability),
-+	       get_encryption_status_string(information.status));
-+}
-+
-+static int ahci_enumerate_ports(struct sys_dev *hba, int port_count, int host_base, int verbose)
- {
- 	/* dump an unsorted list of devices attached to AHCI Intel storage
- 	 * controller, as well as non-connected ports
- 	 */
--	int hba_len = strlen(hba_path) + 1;
-+	int hba_len = strlen(hba->path) + 1;
- 	struct dirent *ent;
- 	DIR *dir;
- 	char *path = NULL;
-@@ -2390,7 +2420,7 @@ static int ahci_enumerate_ports(const char *hba_path, int port_count, int host_b
- 		path = devt_to_devpath(makedev(major, minor), 1, NULL);
- 		if (!path)
- 			continue;
--		if (!path_attached_to_hba(path, hba_path)) {
-+		if (!path_attached_to_hba(path, hba->path)) {
- 			free(path);
- 			path = NULL;
- 			continue;
-@@ -2493,6 +2523,8 @@ static int ahci_enumerate_ports(const char *hba_path, int port_count, int host_b
- 				printf(" (%s)\n", buf);
- 			else
- 				printf(" ()\n");
-+
-+			print_encryption_information(fd, hba->type);
- 			close(fd);
- 		}
- 		free(path);
-@@ -2557,6 +2589,8 @@ static int print_nvme_info(struct sys_dev *hba)
- 		else
- 			printf("()\n");
- 
-+		print_encryption_information(fd, hba->type);
-+
- skip:
- 		close_fd(&fd);
- 	}
-@@ -2812,7 +2846,7 @@ static int detail_platform_imsm(int verbose, int enumerate_only, char *controlle
- 				hba->path, get_sys_dev_type(hba->type));
- 			if (hba->type == SYS_DEV_SATA || hba->type == SYS_DEV_SATA_VMD) {
- 				host_base = ahci_get_port_count(hba->path, &port_count);
--				if (ahci_enumerate_ports(hba->path, port_count, host_base, verbose)) {
-+				if (ahci_enumerate_ports(hba, port_count, host_base, verbose)) {
- 					if (verbose > 0)
- 						pr_err("failed to enumerate ports on %s controller at %s.\n",
- 							get_sys_dev_type(hba->type), hba->pci_id);
--- 
-2.41.0
-

0047-imsm-drive-encryption-policy-implementation.patch

@@ -1,114 +0,0 @@
-From acb8f13be88c224eb1e01f72c1e1fda955bc80ba Mon Sep 17 00:00:00 2001
-From: Blazej Kucman <blazej.kucman@intel.com>
-Date: Fri, 22 Mar 2024 12:51:20 +0100
-Subject: [PATCH 47/66] imsm: drive encryption policy implementation
-
-IMSM cares about drive encryption state. It is not allowed to mix disks
-with different encryption state within one md device. This policy will
-verify that attempt to use disks with different encryption states will
-fail. Verification is performed for devices NVMe/SATA Opal and SATA.
-
-There is one exception, Opal SATA drives encryption is not checked when
-ENCRYPTION_NO_VERIFY key with "sata_opal" value is set in conf, for this
-reason such drives are treated as without encryption support.
-
-Signed-off-by: Blazej Kucman <blazej.kucman@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- super-intel.c | 73 +++++++++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 73 insertions(+)
-
-diff --git a/super-intel.c b/super-intel.c
-index fbd1c11f..1faab607 100644
---- a/super-intel.c
-+++ b/super-intel.c
-@@ -11291,6 +11291,78 @@ test_and_add_drive_controller_policy_imsm(const char * const type, dev_policy_t
- 	return MDADM_STATUS_ERROR;
- }
- 
-+/**
-+ * test_and_add_drive_encryption_policy_imsm() - add disk encryption to policies list.
-+ * @type: policy type to search in the list.
-+ * @pols: list of currently recorded policies.
-+ * @disk_fd: file descriptor of the device to check.
-+ * @hba: The hba to which the drive is attached, could be NULL if verification is disabled.
-+ * @verbose: verbose flag.
-+ *
-+ * IMSM cares about drive encryption state. It is not allowed to mix disks with different
-+ * encryption state within one md device.
-+ * If there is no encryption policy on pols we are free to add first one.
-+ * If there is a policy then, new must be the same.
-+ */
-+static mdadm_status_t
-+test_and_add_drive_encryption_policy_imsm(const char * const type, dev_policy_t **pols, int disk_fd,
-+					  struct sys_dev *hba, const int verbose)
-+{
-+	struct dev_policy *expected_policy = pol_find(*pols, (char *)type);
-+	struct encryption_information information = {0};
-+	char *encryption_state = "Unknown";
-+	int status = MDADM_STATUS_SUCCESS;
-+	bool encryption_checked = true;
-+	char devname[PATH_MAX];
-+
-+	if (!hba)
-+		goto check_policy;
-+
-+	switch (hba->type) {
-+	case SYS_DEV_NVME:
-+	case SYS_DEV_VMD:
-+		status = get_nvme_opal_encryption_information(disk_fd, &information, verbose);
-+		break;
-+	case SYS_DEV_SATA:
-+	case SYS_DEV_SATA_VMD:
-+		status = get_ata_encryption_information(disk_fd, &information, verbose);
-+		break;
-+	default:
-+		encryption_checked = false;
-+	}
-+
-+	if (status) {
-+		fd2devname(disk_fd, devname);
-+		pr_vrb("Failed to read encryption information of device %s\n", devname);
-+		return MDADM_STATUS_ERROR;
-+	}
-+
-+	if (encryption_checked) {
-+		if (information.status == ENC_STATUS_LOCKED) {
-+			fd2devname(disk_fd, devname);
-+			pr_vrb("Device %s is in Locked state, cannot use. Aborting.\n", devname);
-+			return MDADM_STATUS_ERROR;
-+		}
-+		encryption_state = (char *)get_encryption_status_string(information.status);
-+	}
-+
-+check_policy:
-+	if (expected_policy) {
-+		if (strcmp(expected_policy->value, encryption_state) == 0)
-+			return MDADM_STATUS_SUCCESS;
-+
-+		fd2devname(disk_fd, devname);
-+		pr_vrb("Encryption status \"%s\" detected for disk %s, but \"%s\" status was detected eariler.\n",
-+		       encryption_state, devname, expected_policy->value);
-+		pr_vrb("Disks with different encryption status cannot be used.\n");
-+		return MDADM_STATUS_ERROR;
-+	}
-+
-+	pol_add(pols, (char *)type, encryption_state, "imsm");
-+
-+	return MDADM_STATUS_SUCCESS;
-+}
-+
- struct imsm_drive_policy {
- 	char *type;
- 	mdadm_status_t (*test_and_add_drive_policy)(const char * const type,
-@@ -11300,6 +11372,7 @@ struct imsm_drive_policy {
- 
- struct imsm_drive_policy imsm_policies[] = {
- 	{"controller", test_and_add_drive_controller_policy_imsm},
-+	{"encryption", test_and_add_drive_encryption_policy_imsm}
- };
- 
- mdadm_status_t test_and_add_drive_policies_imsm(struct dev_policy **pols, int disk_fd,
--- 
-2.41.0
-

0049-mdadm-Add-MAINTAINERS.md.patch

@@ -1,66 +0,0 @@
-From 21d6c5d96a5a467b5877ba1d38106b3746005bcc Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Tue, 26 Mar 2024 13:21:11 +0100
-Subject: [PATCH 49/66] mdadm: Add MAINTAINERS.md
-
-Describe rules maintainer should follow.
-
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- MAINTAINERS.md | 44 ++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 44 insertions(+)
- create mode 100644 MAINTAINERS.md
-
-diff --git a/MAINTAINERS.md b/MAINTAINERS.md
-new file mode 100644
-index 00000000..9c79ba87
---- /dev/null
-+++ b/MAINTAINERS.md
-@@ -0,0 +1,44 @@
-+# Maintainer tools
-+
-+Useful tools used in daily routines:
-+- [checkpatch](https://docs.kernel.org/dev-tools/checkpatch.html)
-+- [kup](https://korg.docs.kernel.org/kup.html)
-+- [Auto-publishing](https://korg.docs.kernel.org/kup.html#auto-publishing-with-git-archive-signer)
-+- [b4](https://b4.docs.kernel.org/en/latest/)
-+
-+# Checklist before applying patch
-+
-+We don't have CI testing yet, so all those steps must be performed manually:
-+- Style check with [checkpatch](https://docs.kernel.org/dev-tools/checkpatch.html):
-+
-+  This is the current code style follows. We are not strict to all rules. It must be run
-+  by **checkpatch --no-tree**, see README.md.
-+
-+- [Commit style](https://www.kernel.org/doc/html/v4.10/process/submitting-patches.html):
-+
-+  It doesn't need to be followed as strictly as is in kernel but changes should be logically
-+  separated. Submitter should care at least to mention "It is used in next patches" if unused
-+  externs/files are added in patch. We love: *Reported-by:*, *Suggested-by:*, *Fixes:* tags.
-+
-+- Compilation, ideally on various gcc versions.
-+- Mdadm test suite execution.
-+- Consider requesting new tests from submitter, especially for new functionalities.
-+- Ensure that maintainer *sign-off* is added, before pushing.
-+
-+# Making a release
-+
-+Assuming that maintainer is certain that release is safe, following steps must be done:
-+
-+- Update versions strings in release commit, please refer to previous releases for examples.
-+
-+- Create GPG signed tag and push it to repo. Use same format as was used previously, prefixed by
-+  **mdadm-**, e.g. **mdadm-3.1.2**, **mdadm-4.1**.
-+
-+- [Auto-publishing](https://korg.docs.kernel.org/kup.html#auto-publishing-with-git-archive-signer):
-+
-+  Adopt script to our release tag model. When ready, push signed note to repository. If it is done
-+  correctly, then *(sig)* is added to the package automatically generated by kernel.org automation.
-+  There is no need to upload archive manually.
-+
-+- Update CHANGELOG.md.
-+- Write "ANNOUNCE" mail to linux-raid@kernel.org to notify community.
--- 
-2.41.0
-

0050-mdadm-Add-README.md.patch

@@ -1,106 +0,0 @@
-From 256edaef3d43a112356762aaea4a48f021f45aec Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Tue, 26 Mar 2024 13:21:12 +0100
-Subject: [PATCH 50/66] mdadm: Add README.md
-
-Describe supported metadata types, add step-by-step patch sending
-instruction, mention minimally supported kernel version and licensing.
-
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- README.md | 83 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 83 insertions(+)
- create mode 100644 README.md
-
-diff --git a/README.md b/README.md
-new file mode 100644
-index 00000000..64f2ecec
---- /dev/null
-+++ b/README.md
-@@ -0,0 +1,83 @@
-+**mdadm** is a utility used to create and manage **software RAID** devices implemented through
-+**Multiple devices driver (MD)** in kernel. It supports following RAID metadata formats:
-+
-+* [Linux native RAID](https://raid.wiki.kernel.org/index.php/RAID_superblock_formats):
-+
-+  Known as **native** or **native RAID**. First and default metadata format. Metadata management
-+  is implemented in **MD driver**.
-+
-+* Matrix Storage Manager Support (no reference, metadata format documentation is proprietary).
-+
-+  Known as **IMSM**. Metadata format developed and maintained by **Intel®** as a part of **VROC**
-+  solution. There are some functional differences between **native** and **imsm**. The most
-+  important difference is that the metadata is managed from userspace.
-+
-+  **CAUTION:** **imsm** is compatible with **Intel RST**, however it is not officially supported.
-+  You are using it on your own risk.
-+
-+* [Common RAID DDF Specification Revision](https://www.snia.org/sites/default/files/SNIA_DDF_Technical_Position_v2.0.pdf)
-+
-+    **IMPORTANT:** DDF is in **maintenance only** mode. There is no active development around it.
-+    Please do not use it in new solutions.
-+
-+# How to Contribute
-+
-+ **mdadm** is hosted on [kernel.org](https://kernel.org/). You can access repository
-+[here](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git).
-+
-+It is maintained similarly to kernel, using *mailing list*. Patches must be send through email.
-+Please familiarize with general kernel
-+[submitting patches](https://www.kernel.org/doc/html/v4.17/process/submitting-patches.html)
-+documentation. Formatting, tags and commit message guidelines applies to **mdadm**.
-+
-+## Sending patches step-by-step
-+
-+To maximize change of patches being taken, follow this instruction when submitting:
-+
-+1. Create possibly logically separated commits and generate patches:
-+
-+   Use ``git format-patch --cover-letter --signoff -v <nr>`` to create patches:
-+   * ``--cover-letter`` can be skipped if it is only one patch;
-+   * ``--signoff`` adds sign-off tag;
-+   * ``-v <nr>`` indicates review revision number, sender should increment it before resending.
-+
-+2. Check style of every patch with kernel
-+   [checkpatch](https://docs.kernel.org/dev-tools/checkpatch.html) script:
-+
-+   It is important to keep same coding style that is why in **mdadm**
-+   [kernel coding style](https://www.kernel.org/doc/html/v4.10/process/coding-style.html)
-+   is preferred. ``checkpath --no-tree <patch_file>`` can be used to verify patches.
-+   Following checkpatch issues can be ignored:
-+   - New typedefs.
-+   - comparing with *True/False*.
-+   - kernel *MAINTAINERS* file warning.
-+   - *extern* keyword in headers.
-+
-+3. Send patches using ``git send-mail --to=linux-raid@vger.kernel.org <cover-letter> <patch1> <patch2> (...)``
-+
-+# Maintainers
-+
-+It is good practice to add **mdadm maintainers** to recipients for patches:
-+
-+- Jes Sorensen <jes@trained-monkey.org>;
-+- Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>;
-+
-+Adding **MD maintainers** could be reasonable, especially if patches may affect MD driver:
-+
-+- Song Liu <song@kernel.org>;
-+- Yu Kuai <yukuai3@huawei.com>;
-+
-+# Reviewers
-+
-+**mdadm** utility is not part of kernel tree, so there is no certificated *Reviewers* list. Everyone
-+can comment on mailing list, last decision (and merging) belongs to maintainers.
-+
-+# Minimal supported kernel version
-+
-+We do not support kernel versions below **v3.10**. Please be aware that maintainers may remove
-+workarounds and fixes for legacy issues.
-+
-+# License
-+
-+It is released under the terms of the **GNU General Public License version 2** as published
-+by the **Free Software Foundation**.
--- 
-2.41.0
-

0051-Create.c-fix-uclibc-build.patch

@@ -1,41 +0,0 @@
-From 52bead95d2957437c691891fcdc49bd6afccdd49 Mon Sep 17 00:00:00 2001
-From: Fabrice Fontaine <fontaine.fabrice@gmail.com>
-Date: Fri, 12 Apr 2024 18:45:13 +0200
-Subject: [PATCH 51/66] Create.c: fix uclibc build
-
-Define FALLOC_FL_ZERO_RANGE if needed as FALLOC_FL_ZERO_RANGE is only
-defined for aarch64 on uclibc-ng resulting in the following or1k build
-failure since commit 577fd10486d8d1472a6b559066f344ac30a3a391:
-
-Create.c: In function 'write_zeroes_fork':
-Create.c:155:35: error: 'FALLOC_FL_ZERO_RANGE' undeclared (first use in this function)
-  155 |                 if (fallocate(fd, FALLOC_FL_ZERO_RANGE | FALLOC_FL_KEEP_SIZE,
-      |                                   ^~~~~~~~~~~~~~~~~~~~
-
-Fixes:
- - http://autobuild.buildroot.org/results/0e04bcdb591ca5642053e1f7e31384f06581e989
-
-Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Create.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
-diff --git a/Create.c b/Create.c
-index 4397ff49..d94253b1 100644
---- a/Create.c
-+++ b/Create.c
-@@ -32,6 +32,10 @@
- #include	<sys/signalfd.h>
- #include	<sys/wait.h>
- 
-+#ifndef FALLOC_FL_ZERO_RANGE
-+#define FALLOC_FL_ZERO_RANGE 16
-+#endif
-+
- static int round_size_and_verify(unsigned long long *size, int chunk)
- {
- 	if (*size == 0)
--- 
-2.41.0
-

0052-mdadm-pass-struct-context-for-external-reshapes.patch

@@ -1,309 +0,0 @@
-From bdc2c56998abf76141294b04facf20217cfd1911 Mon Sep 17 00:00:00 2001
-From: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Date: Mon, 29 Apr 2024 15:07:13 +0200
-Subject: [PATCH 52/66] mdadm: pass struct context for external reshapes
-
-This patch alters mutiple functions calls so the context is passed to
-external reshape functions.
-
-There are two main reasons behind it:
-- reduces number of arguments passed and unifies them,
-- imsm code will make use of context in incoming patches.
-
-Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Assemble.c    |  7 ++----
- Grow.c        | 68 +++++++++++++++++++++------------------------------
- mdadm.c       |  2 +-
- mdadm.h       | 11 +++------
- super-intel.c |  6 ++---
- 5 files changed, 37 insertions(+), 57 deletions(-)
-
-diff --git a/Assemble.c b/Assemble.c
-index f6c5b99e..f5e9ab1f 100644
---- a/Assemble.c
-+++ b/Assemble.c
-@@ -1197,9 +1197,7 @@ static int start_array(int mdfd,
- 			rv = sysfs_set_str(content, NULL,
- 					   "array_state", "readonly");
- 			if (rv == 0)
--				rv = Grow_continue(mdfd, st, content,
--						   c->backup_file, 0,
--						   c->freeze_reshape);
-+				rv = Grow_continue(mdfd, st, content, 0, c);
- 		} else if (c->readonly &&
- 			   sysfs_attribute_available(content, NULL,
- 						     "array_state")) {
-@@ -2180,8 +2178,7 @@ int assemble_container_content(struct supertype *st, int mdfd,
- 				st->update_tail = &st->updates;
- 		}
- 
--		err = Grow_continue(mdfd, st, content, c->backup_file,
--				    0, c->freeze_reshape);
-+		err = Grow_continue(mdfd, st, content, 0, c);
- 	} else switch(content->array.level) {
- 		case LEVEL_LINEAR:
- 		case LEVEL_MULTIPATH:
-diff --git a/Grow.c b/Grow.c
-index 074f1995..f477b438 100644
---- a/Grow.c
-+++ b/Grow.c
-@@ -864,8 +864,7 @@ static void wait_reshape(struct mdinfo *sra)
- 
- static int reshape_super(struct supertype *st, unsigned long long size,
- 			 int level, int layout, int chunksize, int raid_disks,
--			 int delta_disks, char *backup_file, char *dev,
--			 int direction, int verbose)
-+			 int delta_disks, char *dev, int direction, struct context *c)
- {
- 	/* nothing extra to check in the native case */
- 	if (!st->ss->external)
-@@ -876,9 +875,8 @@ static int reshape_super(struct supertype *st, unsigned long long size,
- 		return 1;
- 	}
- 
--	return st->ss->reshape_super(st, size, level, layout, chunksize,
--				     raid_disks, delta_disks, backup_file, dev,
--				     direction, verbose);
-+	return st->ss->reshape_super(st, size, level, layout, chunksize, raid_disks,
-+				     delta_disks, dev, direction, c);
- }
- 
- static void sync_metadata(struct supertype *st)
-@@ -1764,9 +1762,8 @@ static int reshape_container(char *container, char *devname,
- 			     int mdfd,
- 			     struct supertype *st,
- 			     struct mdinfo *info,
--			     int force,
--			     char *backup_file, int verbose,
--			     int forked, int restart, int freeze_reshape);
-+			     struct context *c,
-+			     int forked, int restart);
- 
- /**
-  * prepare_external_reshape() - prepares update on external metadata if supported.
-@@ -2004,9 +2001,8 @@ int Grow_reshape(char *devname, int fd,
- 			goto release;
- 		}
- 
--		if (reshape_super(st, s->size, UnSet, UnSet, 0, 0, UnSet, NULL,
--				  devname, APPLY_METADATA_CHANGES,
--				  c->verbose > 0)) {
-+		if (reshape_super(st, s->size, UnSet, UnSet, 0, 0, UnSet,
-+				  devname, APPLY_METADATA_CHANGES, c)) {
- 			rv = 1;
- 			goto release;
- 		}
-@@ -2124,10 +2120,8 @@ size_change_error:
- 			int err = errno;
- 
- 			/* restore metadata */
--			if (reshape_super(st, orig_size, UnSet, UnSet, 0, 0,
--					  UnSet, NULL, devname,
--					  ROLLBACK_METADATA_CHANGES,
--					  c->verbose) == 0)
-+			if (reshape_super(st, orig_size, UnSet, UnSet, 0, 0, UnSet,
-+			                  devname, ROLLBACK_METADATA_CHANGES, c) == 0)
- 				sync_metadata(st);
- 			pr_err("Cannot set device size for %s: %s\n",
- 				devname, strerror(err));
-@@ -2338,8 +2332,7 @@ size_change_error:
- 		 */
- 		close_fd(&fd);
- 		rv = reshape_container(container, devname, -1, st, &info,
--				       c->force, c->backup_file, c->verbose,
--				       0, 0, 0);
-+				       c, 0, 0);
- 		frozen = 0;
- 	} else {
- 		/* get spare devices from external metadata
-@@ -2356,13 +2349,13 @@ size_change_error:
- 		}
- 
- 		/* Impose these changes on a single array.  First
--		 * check that the metadata is OK with the change. */
-+		 * check that the metadata is OK with the change.
-+		 */
- 
- 		if (reshape_super(st, 0, info.new_level,
- 				  info.new_layout, info.new_chunk,
- 				  info.array.raid_disks, info.delta_disks,
--				  c->backup_file, devname,
--				  APPLY_METADATA_CHANGES, c->verbose)) {
-+				  devname, APPLY_METADATA_CHANGES, c)) {
- 			rv = 1;
- 			goto release;
- 		}
-@@ -3668,9 +3661,8 @@ int reshape_container(char *container, char *devname,
- 		      int mdfd,
- 		      struct supertype *st,
- 		      struct mdinfo *info,
--		      int force,
--		      char *backup_file, int verbose,
--		      int forked, int restart, int freeze_reshape)
-+		      struct context *c,
-+		      int forked, int restart)
- {
- 	struct mdinfo *cc = NULL;
- 	int rv = restart;
-@@ -3683,8 +3675,7 @@ int reshape_container(char *container, char *devname,
- 	    reshape_super(st, 0, info->new_level,
- 			  info->new_layout, info->new_chunk,
- 			  info->array.raid_disks, info->delta_disks,
--			  backup_file, devname, APPLY_METADATA_CHANGES,
--			  verbose)) {
-+			  devname, APPLY_METADATA_CHANGES, c)) {
- 		unfreeze(st);
- 		return 1;
- 	}
-@@ -3695,7 +3686,7 @@ int reshape_container(char *container, char *devname,
- 	 */
- 	ping_monitor(container);
- 
--	if (!forked && !freeze_reshape)
-+	if (!forked && !c->freeze_reshape)
- 		if (continue_via_systemd(container, GROW_SERVICE, NULL))
- 			return 0;
- 
-@@ -3705,7 +3696,7 @@ int reshape_container(char *container, char *devname,
- 		unfreeze(st);
- 		return 1;
- 	default: /* parent */
--		if (!freeze_reshape)
-+		if (!c->freeze_reshape)
- 			printf("%s: multi-array reshape continues in background\n", Name);
- 		return 0;
- 	case 0: /* child */
-@@ -3802,12 +3793,12 @@ int reshape_container(char *container, char *devname,
- 			flush_mdmon(container);
- 
- 		rv = reshape_array(container, fd, adev, st,
--				   content, force, NULL, INVALID_SECTORS,
--				   backup_file, verbose, 1, restart,
--				   freeze_reshape);
-+				   content, c->force, NULL, INVALID_SECTORS,
-+				   c->backup_file, c->verbose, 1, restart,
-+				   c->freeze_reshape);
- 		close(fd);
- 
--		if (freeze_reshape) {
-+		if (c->freeze_reshape) {
- 			sysfs_free(cc);
- 			exit(0);
- 		}
-@@ -4970,8 +4961,7 @@ int Grow_restart(struct supertype *st, struct mdinfo *info, int *fdlist,
- 	return 1;
- }
- 
--int Grow_continue_command(char *devname, int fd,
--			  char *backup_file, int verbose)
-+int Grow_continue_command(char *devname, int fd, struct context *c)
- {
- 	int ret_val = 0;
- 	struct supertype *st = NULL;
-@@ -5157,7 +5147,7 @@ int Grow_continue_command(char *devname, int fd,
- 
- 	/* continue reshape
- 	 */
--	ret_val = Grow_continue(fd, st, content, backup_file, 1, 0);
-+	ret_val = Grow_continue(fd, st, content, 1, c);
- 
- Grow_continue_command_exit:
- 	if (cfd > -1)
-@@ -5171,7 +5161,7 @@ Grow_continue_command_exit:
- }
- 
- int Grow_continue(int mdfd, struct supertype *st, struct mdinfo *info,
--		  char *backup_file, int forked, int freeze_reshape)
-+		  int forked, struct context *c)
- {
- 	int ret_val = 2;
- 
-@@ -5187,14 +5177,12 @@ int Grow_continue(int mdfd, struct supertype *st, struct mdinfo *info,
- 		st->ss->load_container(st, cfd, st->container_devnm);
- 		close(cfd);
- 		ret_val = reshape_container(st->container_devnm, NULL, mdfd,
--					    st, info, 0, backup_file, 0,
--					    forked, 1 | info->reshape_active,
--					    freeze_reshape);
-+					    st, info, c, forked, 1 | info->reshape_active);
- 	} else
- 		ret_val = reshape_array(NULL, mdfd, "array", st, info, 1,
--					NULL, INVALID_SECTORS, backup_file,
-+					NULL, INVALID_SECTORS, c->backup_file,
- 					0, forked, 1 | info->reshape_active,
--					freeze_reshape);
-+					c->freeze_reshape);
- 
- 	return ret_val;
- }
-diff --git a/mdadm.c b/mdadm.c
-index 3f191288..d18619db 100644
---- a/mdadm.c
-+++ b/mdadm.c
-@@ -1636,7 +1636,7 @@ int main(int argc, char *argv[])
- 				c.delay = DEFAULT_BITMAP_DELAY;
- 			rv = Grow_addbitmap(ident.devname, mdfd, &c, &s);
- 		} else if (grow_continue)
--			rv = Grow_continue_command(ident.devname, mdfd, c.backup_file, c.verbose);
-+			rv = Grow_continue_command(ident.devname, mdfd, &c);
- 		else if (s.size > 0 || s.raiddisks || s.layout_str ||
- 			 s.chunk != 0 || s.level != UnSet ||
- 			 s.data_offset != INVALID_SECTORS) {
-diff --git a/mdadm.h b/mdadm.h
-index 2640b396..0ade4beb 100644
---- a/mdadm.h
-+++ b/mdadm.h
-@@ -1235,9 +1235,8 @@ extern struct superswitch {
- 	int (*reshape_super)(struct supertype *st,
- 			     unsigned long long size, int level,
- 			     int layout, int chunksize, int raid_disks,
--			     int delta_disks, char *backup, char *dev,
--			     int direction,
--			     int verbose); /* optional */
-+			     int delta_disks, char *dev, int direction,
-+			     struct context *c);
- 	int (*manage_reshape)( /* optional */
- 		int afd, struct mdinfo *sra, struct reshape *reshape,
- 		struct supertype *st, unsigned long blocks,
-@@ -1541,8 +1540,7 @@ extern int Grow_reshape(char *devname, int fd,
- extern int Grow_restart(struct supertype *st, struct mdinfo *info,
- 			int *fdlist, int cnt, char *backup_file, int verbose);
- extern int Grow_continue(int mdfd, struct supertype *st,
--			 struct mdinfo *info, char *backup_file,
--			 int forked, int freeze_reshape);
-+			 struct mdinfo *info, int forked, struct context *c);
- extern int Grow_consistency_policy(char *devname, int fd,
- 				   struct context *c, struct shape *s);
- 
-@@ -1552,8 +1550,7 @@ extern int restore_backup(struct supertype *st,
- 			  int spares,
- 			  char **backup_filep,
- 			  int verbose);
--extern int Grow_continue_command(char *devname, int fd,
--				 char *backup_file, int verbose);
-+extern int Grow_continue_command(char *devname, int fd, struct context *c);
- 
- extern int Assemble(struct supertype *st, char *mddev,
- 		    struct mddev_ident *ident,
-diff --git a/super-intel.c b/super-intel.c
-index 1faab607..417da267 100644
---- a/super-intel.c
-+++ b/super-intel.c
-@@ -12153,10 +12153,8 @@ exit:
- }
- 
- static int imsm_reshape_super(struct supertype *st, unsigned long long size,
--			      int level,
--			      int layout, int chunksize, int raid_disks,
--			      int delta_disks, char *backup, char *dev,
--			      int direction, int verbose)
-+			      int level, int layout, int chunksize, int raid_disks,
-+			      int delta_disks, char *dev, int direction, struct context *c)
- {
- 	int ret_val = 1;
- 	struct geo_params geo;
--- 
-2.41.0
-

0053-mdadm-use-struct-context-in-reshape_super.patch

@@ -1,296 +0,0 @@
-From 0acda7053df653022e46fa3b7caf1f4d4ba31a66 Mon Sep 17 00:00:00 2001
-From: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Date: Mon, 29 Apr 2024 15:07:14 +0200
-Subject: [PATCH 53/66] mdadm: use struct context in reshape_super()
-
-reshape_super() takes too many arguments. Change passing params in
-favor of single struct.
-
-Add devname pointer and change direction members to struct shape
-and use it for reshape_super().
-
-Create reshape_array_size() and reshape_array_non_size() to handle
-reshape_super() calls.
-
-Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Grow.c        | 93 +++++++++++++++++++++++++++++++++++++--------------
- mdadm.h       | 18 +++++-----
- super-intel.c | 43 +++++++++++++++---------
- 3 files changed, 105 insertions(+), 49 deletions(-)
-
-diff --git a/Grow.c b/Grow.c
-index f477b438..87ed9214 100644
---- a/Grow.c
-+++ b/Grow.c
-@@ -862,9 +862,7 @@ static void wait_reshape(struct mdinfo *sra)
- 	close(fd);
- }
- 
--static int reshape_super(struct supertype *st, unsigned long long size,
--			 int level, int layout, int chunksize, int raid_disks,
--			 int delta_disks, char *dev, int direction, struct context *c)
-+static int reshape_super(struct supertype *st, struct shape *shape, struct context *c)
- {
- 	/* nothing extra to check in the native case */
- 	if (!st->ss->external)
-@@ -875,8 +873,65 @@ static int reshape_super(struct supertype *st, unsigned long long size,
- 		return 1;
- 	}
- 
--	return st->ss->reshape_super(st, size, level, layout, chunksize, raid_disks,
--				     delta_disks, dev, direction, c);
-+	return st->ss->reshape_super(st, shape, c);
-+}
-+
-+/**
-+ * reshape_super_size() - Reshape array, size only.
-+ *
-+ * @st: supertype.
-+ * @devname: device name.
-+ * @size: component size.
-+ * @dir metadata changes direction
-+ * Returns: 0 on success, 1 otherwise.
-+ *
-+ * This function is solely used to change size of the volume.
-+ * Setting size is not valid for container.
-+ * Size is only change that can be rolled back, thus the @dir param.
-+ */
-+static int reshape_super_size(struct supertype *st, char *devname,
-+			      unsigned long long size, change_dir_t direction,
-+			      struct context *c)
-+{
-+	struct shape shape = {0};
-+
-+	shape.level = UnSet;
-+	shape.layout = UnSet;
-+	shape.delta_disks = UnSet;
-+	shape.dev = devname;
-+	shape.size = size;
-+	shape.direction = direction;
-+
-+	return reshape_super(st, &shape, c);
-+}
-+
-+/**
-+ * reshape_super_non_size() - Reshape array, non size changes.
-+ *
-+ * @st: supertype.
-+ * @devname: device name.
-+ * @info: superblock info.
-+ * Returns: 0 on success, 1 otherwise.
-+ *
-+ * This function is used for any external array changes but size.
-+ * It handles both volumes and containers.
-+ * For changes other than size, rollback is not possible.
-+ */
-+static int reshape_super_non_size(struct supertype *st, char *devname,
-+				  struct mdinfo *info, struct context *c)
-+{
-+	struct shape shape = {0};
-+	/* Size already set to zero, not updating size */
-+	shape.level = info->new_level;
-+	shape.layout = info->new_layout;
-+	shape.chunk = info->new_chunk;
-+	shape.raiddisks = info->array.raid_disks;
-+	shape.delta_disks = info->delta_disks;
-+	shape.dev = devname;
-+	/* Rollback not possible for non size changes */
-+	shape.direction = APPLY_METADATA_CHANGES;
-+
-+	return reshape_super(st, &shape, c);
- }
- 
- static void sync_metadata(struct supertype *st)
-@@ -1979,9 +2034,8 @@ int Grow_reshape(char *devname, int fd,
- 	}
- 
- 	/* ========= set size =============== */
--	if (s->size > 0 &&
--	    (s->size == MAX_SIZE || s->size != (unsigned)array.size)) {
--		unsigned long long orig_size = get_component_size(fd)/2;
-+	if (s->size > 0 && (s->size == MAX_SIZE || s->size != (unsigned)array.size)) {
-+		unsigned long long orig_size = get_component_size(fd) / 2;
- 		unsigned long long min_csize;
- 		struct mdinfo *mdi;
- 		int raid0_takeover = 0;
-@@ -2001,8 +2055,7 @@ int Grow_reshape(char *devname, int fd,
- 			goto release;
- 		}
- 
--		if (reshape_super(st, s->size, UnSet, UnSet, 0, 0, UnSet,
--				  devname, APPLY_METADATA_CHANGES, c)) {
-+		if (reshape_super_size(st, devname, s->size, APPLY_METADATA_CHANGES, c)) {
- 			rv = 1;
- 			goto release;
- 		}
-@@ -2120,8 +2173,8 @@ size_change_error:
- 			int err = errno;
- 
- 			/* restore metadata */
--			if (reshape_super(st, orig_size, UnSet, UnSet, 0, 0, UnSet,
--			                  devname, ROLLBACK_METADATA_CHANGES, c) == 0)
-+			if (reshape_super_size(st, devname, orig_size,
-+					       ROLLBACK_METADATA_CHANGES, c) == 0)
- 				sync_metadata(st);
- 			pr_err("Cannot set device size for %s: %s\n",
- 				devname, strerror(err));
-@@ -2351,11 +2404,7 @@ size_change_error:
- 		/* Impose these changes on a single array.  First
- 		 * check that the metadata is OK with the change.
- 		 */
--
--		if (reshape_super(st, 0, info.new_level,
--				  info.new_layout, info.new_chunk,
--				  info.array.raid_disks, info.delta_disks,
--				  devname, APPLY_METADATA_CHANGES, c)) {
-+		if (reshape_super_non_size(st, devname, &info, c)) {
- 			rv = 1;
- 			goto release;
- 		}
-@@ -3668,14 +3717,8 @@ int reshape_container(char *container, char *devname,
- 	int rv = restart;
- 	char last_devnm[32] = "";
- 
--	/* component_size is not meaningful for a container,
--	 * so pass '0' meaning 'no change'
--	 */
--	if (!restart &&
--	    reshape_super(st, 0, info->new_level,
--			  info->new_layout, info->new_chunk,
--			  info->array.raid_disks, info->delta_disks,
--			  devname, APPLY_METADATA_CHANGES, c)) {
-+	/* component_size is not meaningful for a container */
-+	if (!restart && reshape_super_non_size(st, devname, info, c)) {
- 		unfreeze(st);
- 		return 1;
- 	}
-diff --git a/mdadm.h b/mdadm.h
-index 0ade4beb..2ff3e463 100644
---- a/mdadm.h
-+++ b/mdadm.h
-@@ -594,6 +594,11 @@ enum flag_mode {
- 	FlagDefault, FlagSet, FlagClear,
- };
- 
-+typedef enum {
-+	ROLLBACK_METADATA_CHANGES,
-+	APPLY_METADATA_CHANGES
-+} change_dir_t;
-+
- /* structures read from config file */
- /* List of mddevice names and identifiers
-  * Identifiers can be:
-@@ -667,7 +672,9 @@ struct context {
- };
- 
- struct shape {
-+	char	*dev;
- 	int	raiddisks;
-+	int	delta_disks;
- 	int	sparedisks;
- 	int	journaldisks;
- 	int	level;
-@@ -682,6 +689,7 @@ struct shape {
- 	unsigned long long size;
- 	unsigned long long data_offset;
- 	int	consistency_policy;
-+	change_dir_t direction;
- };
- 
- /* List of device names - wildcards expanded */
-@@ -1229,14 +1237,8 @@ extern struct superswitch {
- 	 * initialized to indicate if reshape is being performed at the
- 	 * container or subarray level
- 	 */
--#define APPLY_METADATA_CHANGES		1
--#define ROLLBACK_METADATA_CHANGES	0
--
--	int (*reshape_super)(struct supertype *st,
--			     unsigned long long size, int level,
--			     int layout, int chunksize, int raid_disks,
--			     int delta_disks, char *dev, int direction,
--			     struct context *c);
-+
-+	int (*reshape_super)(struct supertype *st, struct shape *shape, struct context *c);
- 	int (*manage_reshape)( /* optional */
- 		int afd, struct mdinfo *sra, struct reshape *reshape,
- 		struct supertype *st, unsigned long blocks,
-diff --git a/super-intel.c b/super-intel.c
-index 417da267..1a8a7b12 100644
---- a/super-intel.c
-+++ b/super-intel.c
-@@ -12152,26 +12152,37 @@ exit:
- 	return ret_val;
- }
- 
--static int imsm_reshape_super(struct supertype *st, unsigned long long size,
--			      int level, int layout, int chunksize, int raid_disks,
--			      int delta_disks, char *dev, int direction, struct context *c)
-+/**
-+ * shape_to_geo() - fill geo_params from shape.
-+ *
-+ * @shape: array details.
-+ * @geo: new geometry params.
-+ * Returns: 0 on success, 1 otherwise.
-+ */
-+static void shape_to_geo(struct shape *shape, struct geo_params *geo)
-+{
-+	assert(shape);
-+	assert(geo);
-+
-+	geo->dev_name = shape->dev;
-+	geo->size = shape->size;
-+	geo->level = shape->level;
-+	geo->layout = shape->layout;
-+	geo->chunksize = shape->chunk;
-+	geo->raid_disks = shape->raiddisks;
-+}
-+
-+static int imsm_reshape_super(struct supertype *st, struct shape *shape, struct context *c)
- {
- 	int ret_val = 1;
--	struct geo_params geo;
-+	struct geo_params geo = {0};
- 
- 	dprintf("(enter)\n");
- 
--	memset(&geo, 0, sizeof(struct geo_params));
--
--	geo.dev_name = dev;
-+	shape_to_geo(shape, &geo);
- 	strcpy(geo.devnm, st->devnm);
--	geo.size = size;
--	geo.level = level;
--	geo.layout = layout;
--	geo.chunksize = chunksize;
--	geo.raid_disks = raid_disks;
--	if (delta_disks != UnSet)
--		geo.raid_disks += delta_disks;
-+	if (shape->delta_disks != UnSet)
-+		geo.raid_disks += shape->delta_disks;
- 
- 	dprintf("for level      : %i\n", geo.level);
- 	dprintf("for raid_disks : %i\n", geo.raid_disks);
-@@ -12182,7 +12193,7 @@ static int imsm_reshape_super(struct supertype *st, unsigned long long size,
- 		int old_raid_disks = 0;
- 
- 		if (imsm_reshape_is_allowed_on_container(
--			    st, &geo, &old_raid_disks, direction)) {
-+			    st, &geo, &old_raid_disks, shape->direction)) {
- 			struct imsm_update_reshape *u = NULL;
- 			int len;
- 
-@@ -12236,7 +12247,7 @@ static int imsm_reshape_super(struct supertype *st, unsigned long long size,
- 			goto exit_imsm_reshape_super;
- 		}
- 		super->current_vol = dev->index;
--		change = imsm_analyze_change(st, &geo, direction);
-+		change = imsm_analyze_change(st, &geo, shape->direction);
- 		switch (change) {
- 		case CH_TAKEOVER:
- 			ret_val = imsm_takeover(st, &geo);
--- 
-2.41.0
-

0054-imsm-add-support-for-literal-RAID-10.patch

@@ -1,184 +0,0 @@
-From 27550b13297adbdefe42fe4eb785b7fde1c0ed91 Mon Sep 17 00:00:00 2001
-From: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Date: Mon, 29 Apr 2024 15:07:15 +0200
-Subject: [PATCH 54/66] imsm: add support for literal RAID 10
-
-As for now, IMSM supports only 4 drive RAID 1+0. This patch is first in
-series to add support for literal RAID 10 (with more than 4 drives) to
-imsm.
-
-Allow setting RAID 10 as raid level for imsm arrays.
-
-Add update_imsm_raid_level() to handle raid level updates. Set RAID10 as
-default level for imsm R0 to R10 migrations. Replace magic numbers with
-defined values for RAID level checks/assigns.
-
-Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- super-intel.c | 67 ++++++++++++++++++++++++++++++++++++---------------
- 1 file changed, 48 insertions(+), 19 deletions(-)
-
-diff --git a/super-intel.c b/super-intel.c
-index 1a8a7b12..a7efc8df 100644
---- a/super-intel.c
-+++ b/super-intel.c
-@@ -166,7 +166,8 @@ struct imsm_map {
- 	__u8  raid_level;
- #define IMSM_T_RAID0 0
- #define IMSM_T_RAID1 1
--#define IMSM_T_RAID5 5		/* since metadata version 1.2.02 ? */
-+#define IMSM_T_RAID5 5
-+#define IMSM_T_RAID10 10
- 	__u8  num_members;	/* number of member disks */
- 	__u8  num_domains;	/* number of parity domains */
- 	__u8  failed_disk_num;  /* valid only when state is degraded */
-@@ -1259,14 +1260,42 @@ static int get_imsm_disk_slot(struct imsm_map *map, const unsigned int idx)
- 
- 	return IMSM_STATUS_ERROR;
- }
-+/**
-+ * update_imsm_raid_level() - update raid level appropriately in &imsm_map.
-+ * @map:	&imsm_map pointer.
-+ * @new_level:	MD style level.
-+ *
-+ * For backward compatibility reasons we need to differentiate RAID10.
-+ * In the past IMSM RAID10 was presented as RAID1.
-+ * Keep compatibility unless it is not explicitly updated by UEFI driver.
-+ *
-+ * Routine needs num_members to be set and (optionally) raid_level.
-+ */
-+static void update_imsm_raid_level(struct imsm_map *map, int new_level)
-+{
-+	if (new_level != IMSM_T_RAID10) {
-+		map->raid_level = new_level;
-+		return;
-+	}
-+
-+	if (map->num_members == 4) {
-+		if (map->raid_level == IMSM_T_RAID10 || map->raid_level == IMSM_T_RAID1)
-+			return;
-+
-+		map->raid_level = IMSM_T_RAID1;
-+		return;
-+	}
-+
-+	map->raid_level = IMSM_T_RAID10;
-+}
- 
- static int get_imsm_raid_level(struct imsm_map *map)
- {
--	if (map->raid_level == 1) {
-+	if (map->raid_level == IMSM_T_RAID1) {
- 		if (map->num_members == 2)
--			return 1;
-+			return IMSM_T_RAID1;
- 		else
--			return 10;
-+			return IMSM_T_RAID10;
- 	}
- 
- 	return map->raid_level;
-@@ -5678,7 +5707,7 @@ static int init_super_imsm_volume(struct supertype *st, mdu_array_info_t *info,
- 	set_pba_of_lba0(map, super->create_offset);
- 	map->blocks_per_strip = __cpu_to_le16(info_to_blocks_per_strip(info));
- 	map->failed_disk_num = ~0;
--	if (info->level > 0)
-+	if (info->level > IMSM_T_RAID0)
- 		map->map_state = (info->state ? IMSM_T_STATE_NORMAL
- 				  : IMSM_T_STATE_UNINITIALIZED);
- 	else
-@@ -5686,16 +5715,15 @@ static int init_super_imsm_volume(struct supertype *st, mdu_array_info_t *info,
- 						      IMSM_T_STATE_NORMAL;
- 	map->ddf = 1;
- 
--	if (info->level == 1 && info->raid_disks > 2) {
-+	if (info->level == IMSM_T_RAID1 && info->raid_disks > 2) {
- 		free(dev);
- 		free(dv);
--		pr_err("imsm does not support more than 2 disksin a raid1 volume\n");
-+		pr_err("imsm does not support more than 2 disks in a raid1 volume\n");
- 		return 0;
- 	}
-+	map->num_members = info->raid_disks;
- 
--	map->raid_level = info->level;
--	if (info->level == 10)
--		map->raid_level = 1;
-+	update_imsm_raid_level(map, info->level);
- 	set_num_domains(map);
- 
- 	size_per_member += NUM_BLOCKS_DIRTY_STRIPE_REGION;
-@@ -5703,7 +5731,6 @@ static int init_super_imsm_volume(struct supertype *st, mdu_array_info_t *info,
- 							     size_per_member /
- 							     BLOCKS_PER_KB));
- 
--	map->num_members = info->raid_disks;
- 	update_num_data_stripes(map, array_blocks);
- 	for (i = 0; i < map->num_members; i++) {
- 		/* initialized in add_to_super */
-@@ -8275,7 +8302,7 @@ static struct mdinfo *container_content_imsm(struct supertype *st, char *subarra
- 			info_d->data_offset = pba_of_lba0(map);
- 			info_d->component_size = calc_component_size(map, dev);
- 
--			if (map->raid_level == 5) {
-+			if (map->raid_level == IMSM_T_RAID5) {
- 				info_d->ppl_sector = this->ppl_sector;
- 				info_d->ppl_size = this->ppl_size;
- 				if (this->consistency_policy == CONSISTENCY_POLICY_PPL &&
-@@ -9533,7 +9560,7 @@ static int apply_reshape_migration_update(struct imsm_update_reshape_migration *
- 			}
- 
- 			to_state = map->map_state;
--			if ((u->new_level == 5) && (map->raid_level == 0)) {
-+			if ((u->new_level == IMSM_T_RAID5) && (map->raid_level == IMSM_T_RAID0)) {
- 				map->num_members++;
- 				/* this should not happen */
- 				if (u->new_disks[0] < 0) {
-@@ -9544,11 +9571,13 @@ static int apply_reshape_migration_update(struct imsm_update_reshape_migration *
- 					to_state = IMSM_T_STATE_NORMAL;
- 			}
- 			migrate(new_dev, super, to_state, MIGR_GEN_MIGR);
-+
- 			if (u->new_level > -1)
--				map->raid_level = u->new_level;
-+				update_imsm_raid_level(map, u->new_level);
-+
- 			migr_map = get_imsm_map(new_dev, MAP_1);
--			if ((u->new_level == 5) &&
--			    (migr_map->raid_level == 0)) {
-+			if ((u->new_level == IMSM_T_RAID5) &&
-+			    (migr_map->raid_level == IMSM_T_RAID0)) {
- 				int ord = map->num_members - 1;
- 				migr_map->num_members--;
- 				if (u->new_disks[0] < 0)
-@@ -9584,7 +9613,7 @@ static int apply_reshape_migration_update(struct imsm_update_reshape_migration *
- 
- 			/* add disk
- 			 */
--			if (u->new_level != 5 || migr_map->raid_level != 0 ||
-+			if (u->new_level != IMSM_T_RAID5 || migr_map->raid_level != IMSM_T_RAID0 ||
- 			    migr_map->raid_level == map->raid_level)
- 				goto skip_disk_add;
- 
-@@ -9963,7 +9992,7 @@ static int apply_takeover_update(struct imsm_update_takeover *u,
- 		/* update map */
- 		map->num_members /= map->num_domains;
- 		map->map_state = IMSM_T_STATE_NORMAL;
--		map->raid_level = 0;
-+		update_imsm_raid_level(map, IMSM_T_RAID0);
- 		set_num_domains(map);
- 		update_num_data_stripes(map, imsm_dev_size(dev));
- 		map->failed_disk_num = -1;
-@@ -10007,7 +10036,7 @@ static int apply_takeover_update(struct imsm_update_takeover *u,
- 		map = get_imsm_map(dev_new, MAP_0);
- 
- 		map->map_state = IMSM_T_STATE_DEGRADED;
--		map->raid_level = 1;
-+		update_imsm_raid_level(map, IMSM_T_RAID10);
- 		set_num_domains(map);
- 		map->num_members = map->num_members * map->num_domains;
- 		update_num_data_stripes(map, imsm_dev_size(dev));
--- 
-2.41.0
-

0055-imsm-refactor-RAID-level-handling.patch

@@ -1,345 +0,0 @@
-From 191e6ddb1388236c5c54baf5020a87c996be941f Mon Sep 17 00:00:00 2001
-From: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Date: Mon, 29 Apr 2024 15:07:16 +0200
-Subject: [PATCH 55/66] imsm: refactor RAID level handling
-
-Add imsm_level_ops struct for better handling and unifying raid level
-support. Add helper methods and move "orom_has_raid[...]" methods from
-header to source file.
-
-RAID 1e is not supported under Linux, remove RAID 1e associated code.
-
-Refactor imsm_analyze_change() and is_raid_level_supported().
-Remove hardcoded check for 4 drives and make devNumChange a multiplier
-for RAID 10.
-
-Refactor printing supported raid levels.
-
-Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- platform-intel.c |  57 ++++++++++++++++++++++++
- platform-intel.h |  32 ++++++--------
- super-intel.c    | 111 ++++++++++++++++++++++++++++-------------------
- 3 files changed, 138 insertions(+), 62 deletions(-)
-
-diff --git a/platform-intel.c b/platform-intel.c
-index ac282bc5..40e8fb82 100644
---- a/platform-intel.c
-+++ b/platform-intel.c
-@@ -32,6 +32,63 @@
- 
- #define NVME_SUBSYS_PATH "/sys/devices/virtual/nvme-subsystem/"
- 
-+static bool imsm_orom_has_raid0(const struct imsm_orom *orom)
-+{
-+	return imsm_rlc_has_bit(orom, IMSM_OROM_RLC_RAID0);
-+}
-+
-+static bool imsm_orom_has_raid1(const struct imsm_orom *orom)
-+{
-+	return imsm_rlc_has_bit(orom, IMSM_OROM_RLC_RAID1);
-+}
-+
-+static bool imsm_orom_has_raid10(const struct imsm_orom *orom)
-+{
-+	return imsm_rlc_has_bit(orom, IMSM_OROM_RLC_RAID10);
-+}
-+
-+static bool imsm_orom_has_raid5(const struct imsm_orom *orom)
-+{
-+	return imsm_rlc_has_bit(orom, IMSM_OROM_RLC_RAID5);
-+}
-+
-+/* IMSM platforms do not define how many disks are allowed for each level,
-+ * but there are some global limitations we need to follow.
-+ */
-+static bool imsm_orom_support_raid_disks_count_raid0(const int raid_disks)
-+{
-+	return true;
-+}
-+
-+static bool imsm_orom_support_raid_disks_count_raid1(const int raid_disks)
-+{
-+	if (raid_disks == 2)
-+		return true;
-+	return false;
-+}
-+
-+static bool imsm_orom_support_raid_disks_count_raid5(const int raid_disks)
-+{
-+	if (raid_disks > 2)
-+		return true;
-+	return false;
-+}
-+
-+static bool imsm_orom_support_raid_disks_count_raid10(const int raid_disks)
-+{
-+	if (raid_disks == 4)
-+		return true;
-+	return false;
-+}
-+
-+struct imsm_level_ops imsm_level_ops[] = {
-+		{0, imsm_orom_has_raid0, imsm_orom_support_raid_disks_count_raid0, "raid0"},
-+		{1, imsm_orom_has_raid1, imsm_orom_support_raid_disks_count_raid1, "raid1"},
-+		{5, imsm_orom_has_raid5, imsm_orom_support_raid_disks_count_raid5, "raid5"},
-+		{10, imsm_orom_has_raid10, imsm_orom_support_raid_disks_count_raid10, "raid10"},
-+		{-1, NULL, NULL, NULL}
-+};
-+
- static int devpath_to_ll(const char *dev_path, const char *entry,
- 			 unsigned long long *val);
- 
-diff --git a/platform-intel.h b/platform-intel.h
-index 3c2bc595..dcc5aaa7 100644
---- a/platform-intel.h
-+++ b/platform-intel.h
-@@ -109,25 +109,21 @@ struct imsm_orom {
- 	#define IMSM_OROM_CAPABILITIES_TPV (1 << 10)
- } __attribute__((packed));
- 
--static inline int imsm_orom_has_raid0(const struct imsm_orom *orom)
--{
--	return !!(orom->rlc & IMSM_OROM_RLC_RAID0);
--}
--static inline int imsm_orom_has_raid1(const struct imsm_orom *orom)
--{
--	return !!(orom->rlc & IMSM_OROM_RLC_RAID1);
--}
--static inline int imsm_orom_has_raid1e(const struct imsm_orom *orom)
--{
--	return !!(orom->rlc & IMSM_OROM_RLC_RAID1E);
--}
--static inline int imsm_orom_has_raid10(const struct imsm_orom *orom)
--{
--	return !!(orom->rlc & IMSM_OROM_RLC_RAID10);
--}
--static inline int imsm_orom_has_raid5(const struct imsm_orom *orom)
-+/* IMSM metadata requirements for each level */
-+struct imsm_level_ops {
-+	int level;
-+	bool (*is_level_supported)(const struct imsm_orom *);
-+	bool (*is_raiddisks_count_supported)(const int);
-+	char *name;
-+};
-+
-+extern struct imsm_level_ops imsm_level_ops[];
-+
-+static inline bool imsm_rlc_has_bit(const struct imsm_orom *orom, const unsigned short bit)
- {
--	return !!(orom->rlc & IMSM_OROM_RLC_RAID5);
-+	if (orom->rlc & bit)
-+		return true;
-+	return false;
- }
- 
- /**
-diff --git a/super-intel.c b/super-intel.c
-index a7efc8df..da17265d 100644
---- a/super-intel.c
-+++ b/super-intel.c
-@@ -2681,6 +2681,15 @@ static int ahci_get_port_count(const char *hba_path, int *port_count)
- 	return host_base;
- }
- 
-+static void print_imsm_level_capability(const struct imsm_orom *orom)
-+{
-+	int idx;
-+
-+	for (idx = 0; imsm_level_ops[idx].name; idx++)
-+		if (imsm_level_ops[idx].is_level_supported(orom))
-+			printf("%s ", imsm_level_ops[idx].name);
-+}
-+
- static void print_imsm_capability(const struct imsm_orom *orom)
- {
- 	printf("       Platform : Intel(R) ");
-@@ -2699,12 +2708,11 @@ static void print_imsm_capability(const struct imsm_orom *orom)
- 			printf("        Version : %d.%d.%d.%d\n", orom->major_ver,
- 			       orom->minor_ver, orom->hotfix_ver, orom->build);
- 	}
--	printf("    RAID Levels :%s%s%s%s%s\n",
--	       imsm_orom_has_raid0(orom) ? " raid0" : "",
--	       imsm_orom_has_raid1(orom) ? " raid1" : "",
--	       imsm_orom_has_raid1e(orom) ? " raid1e" : "",
--	       imsm_orom_has_raid10(orom) ? " raid10" : "",
--	       imsm_orom_has_raid5(orom) ? " raid5" : "");
-+
-+	printf("    RAID Levels : ");
-+	print_imsm_level_capability(orom);
-+	printf("\n");
-+
- 	printf("    Chunk Sizes :%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
- 	       imsm_orom_has_chunk(orom, 2) ? " 2k" : "",
- 	       imsm_orom_has_chunk(orom, 4) ? " 4k" : "",
-@@ -2739,12 +2747,11 @@ static void print_imsm_capability_export(const struct imsm_orom *orom)
- 	if (orom->major_ver || orom->minor_ver || orom->hotfix_ver || orom->build)
- 		printf("IMSM_VERSION=%d.%d.%d.%d\n", orom->major_ver, orom->minor_ver,
- 				orom->hotfix_ver, orom->build);
--	printf("IMSM_SUPPORTED_RAID_LEVELS=%s%s%s%s%s\n",
--			imsm_orom_has_raid0(orom) ? "raid0 " : "",
--			imsm_orom_has_raid1(orom) ? "raid1 " : "",
--			imsm_orom_has_raid1e(orom) ? "raid1e " : "",
--			imsm_orom_has_raid5(orom) ? "raid10 " : "",
--			imsm_orom_has_raid10(orom) ? "raid5 " : "");
-+
-+	printf("IMSM_SUPPORTED_RAID_LEVELS=");
-+	print_imsm_level_capability(orom);
-+	printf("\n");
-+
- 	printf("IMSM_SUPPORTED_CHUNK_SIZES=%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
- 			imsm_orom_has_chunk(orom, 2) ? "2k " : "",
- 			imsm_orom_has_chunk(orom, 4) ? "4k " : "",
-@@ -6992,26 +6999,41 @@ static unsigned long long merge_extents(struct intel_super *super, const bool ex
- 	return free_size - reservation_size;
- }
- 
--static int is_raid_level_supported(const struct imsm_orom *orom, int level, int raiddisks)
-+/**
-+ * is_raid_level_supported() - check if this count of drives and level is supported by platform.
-+ * @orom: hardware properties, could be NULL.
-+ * @level: requested raid level.
-+ * @raiddisks: requested disk count.
-+ *
-+ * IMSM UEFI/OROM does not provide information about supported count of raid disks
-+ * for particular level. That is why it is hardcoded.
-+ * It is recommended to not allow of usage other levels than supported,
-+ * IMSM code is not tested against different level implementations.
-+ *
-+ * Return: true if supported, false otherwise.
-+ */
-+static bool is_raid_level_supported(const struct imsm_orom *orom, int level, int raiddisks)
- {
--	if (level < 0 || level == 6 || level == 4)
--		return 0;
-+	int idx;
- 
--	/* if we have an orom prevent invalid raid levels */
--	if (orom)
--		switch (level) {
--		case 0: return imsm_orom_has_raid0(orom);
--		case 1:
--			if (raiddisks > 2)
--				return imsm_orom_has_raid1e(orom);
--			return imsm_orom_has_raid1(orom) && raiddisks == 2;
--		case 10: return imsm_orom_has_raid10(orom) && raiddisks == 4;
--		case 5: return imsm_orom_has_raid5(orom) && raiddisks > 2;
--		}
--	else
--		return 1; /* not on an Intel RAID platform so anything goes */
-+	for (idx = 0; imsm_level_ops[idx].name; idx++) {
-+		if (imsm_level_ops[idx].level == level)
-+			break;
-+	}
- 
--	return 0;
-+	if (!imsm_level_ops[idx].name)
-+		return false;
-+
-+	if (!imsm_level_ops[idx].is_raiddisks_count_supported(raiddisks))
-+		return false;
-+
-+	if (!orom)
-+		return true;
-+
-+	if (imsm_level_ops[idx].is_level_supported(orom))
-+		return true;
-+
-+	return false;
- }
- 
- static int
-@@ -11962,18 +11984,17 @@ enum imsm_reshape_type imsm_analyze_change(struct supertype *st,
- 	int change = -1;
- 	int check_devs = 0;
- 	int chunk;
--	/* number of added/removed disks in operation result */
--	int devNumChange = 0;
- 	/* imsm compatible layout value for array geometry verification */
- 	int imsm_layout = -1;
-+	int raid_disks = geo->raid_disks;
- 	imsm_status_t rv;
- 
- 	getinfo_super_imsm_volume(st, &info, NULL);
--	if (geo->level != info.array.level && geo->level >= 0 &&
-+	if (geo->level != info.array.level && geo->level >= IMSM_T_RAID0 &&
- 	    geo->level != UnSet) {
- 		switch (info.array.level) {
--		case 0:
--			if (geo->level == 5) {
-+		case IMSM_T_RAID0:
-+			if (geo->level == IMSM_T_RAID5) {
- 				change = CH_MIGRATION;
- 				if (geo->layout != ALGORITHM_LEFT_ASYMMETRIC) {
- 					pr_err("Error. Requested Layout not supported (left-asymmetric layout is supported only)!\n");
-@@ -11982,20 +12003,20 @@ enum imsm_reshape_type imsm_analyze_change(struct supertype *st,
- 				}
- 				imsm_layout =  geo->layout;
- 				check_devs = 1;
--				devNumChange = 1; /* parity disk added */
--			} else if (geo->level == 10) {
-+				raid_disks += 1; /* parity disk added */
-+			} else if (geo->level == IMSM_T_RAID10) {
- 				change = CH_TAKEOVER;
- 				check_devs = 1;
--				devNumChange = 2; /* two mirrors added */
-+				raid_disks *= 2; /* mirrors added */
- 				imsm_layout = 0x102; /* imsm supported layout */
- 			}
- 			break;
--		case 1:
--		case 10:
-+		case IMSM_T_RAID1:
-+		case IMSM_T_RAID10:
- 			if (geo->level == 0) {
- 				change = CH_TAKEOVER;
- 				check_devs = 1;
--				devNumChange = -(geo->raid_disks/2);
-+				raid_disks /= 2;
- 				imsm_layout = 0; /* imsm raid0 layout */
- 			}
- 			break;
-@@ -12011,10 +12032,10 @@ enum imsm_reshape_type imsm_analyze_change(struct supertype *st,
- 	if (geo->layout != info.array.layout &&
- 	    (geo->layout != UnSet && geo->layout != -1)) {
- 		change = CH_MIGRATION;
--		if (info.array.layout == 0 && info.array.level == 5 &&
-+		if (info.array.layout == 0 && info.array.level == IMSM_T_RAID5 &&
- 		    geo->layout == 5) {
- 			/* reshape 5 -> 4 */
--		} else if (info.array.layout == 5 && info.array.level == 5 &&
-+		} else if (info.array.layout == 5 && info.array.level == IMSM_T_RAID5 &&
- 			   geo->layout == 0) {
- 			/* reshape 4 -> 5 */
- 			geo->layout = 0;
-@@ -12033,7 +12054,7 @@ enum imsm_reshape_type imsm_analyze_change(struct supertype *st,
- 
- 	if (geo->chunksize > 0 && geo->chunksize != UnSet &&
- 	    geo->chunksize != info.array.chunk_size) {
--		if (info.array.level == 10) {
-+		if (info.array.level == IMSM_T_RAID10) {
- 			pr_err("Error. Chunk size change for RAID 10 is not supported.\n");
- 			change = -1;
- 			goto analyse_change_exit;
-@@ -12058,14 +12079,16 @@ enum imsm_reshape_type imsm_analyze_change(struct supertype *st,
- 		rv = imsm_analyze_expand(st, geo, &info, direction);
- 		if (rv != IMSM_STATUS_OK)
- 			goto analyse_change_exit;
-+		raid_disks = geo->raid_disks;
- 		change = CH_ARRAY_SIZE;
- 	}
- 
- 	chunk = geo->chunksize / 1024;
-+
- 	if (!validate_geometry_imsm(st,
- 				    geo->level,
- 				    imsm_layout,
--				    geo->raid_disks + devNumChange,
-+				    raid_disks,
- 				    &chunk,
- 				    geo->size, INVALID_SECTORS,
- 				    0, 0, info.consistency_policy, 1))
--- 
-2.41.0
-

0056-imsm-bump-minimal-version.patch

@@ -1,180 +0,0 @@
-From ec7e873ba6643a9e5e74311b00ede66a3d2e36c9 Mon Sep 17 00:00:00 2001
-From: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Date: Mon, 29 Apr 2024 15:07:17 +0200
-Subject: [PATCH 56/66] imsm: bump minimal version
-
-IMSM version 1.3 (called ATTRIBS) brought attributes used to define array
-properties which require support in driver. The goal of this change was
-to avoid changing version when adding new features.
-
-For some reasons migration has never been completed and currently (after
-10 years of implementing) IMSM can use older versions.
-
-It is right time to finally switch it. There is no point in using old
-versions, use 1.3.00 as minimal one.
-
-Define JD_VERSION used by Windows driver.
-
-Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- super-intel.c | 87 ++++++++++++++++++++++-----------------------------
- 1 file changed, 38 insertions(+), 49 deletions(-)
-
-diff --git a/super-intel.c b/super-intel.c
-index da17265d..4b168add 100644
---- a/super-intel.c
-+++ b/super-intel.c
-@@ -32,14 +32,19 @@
- /* MPB == Metadata Parameter Block */
- #define MPB_SIGNATURE "Intel Raid ISM Cfg Sig. "
- #define MPB_SIG_LEN (strlen(MPB_SIGNATURE))
--#define MPB_VERSION_RAID0 "1.0.00"
--#define MPB_VERSION_RAID1 "1.1.00"
--#define MPB_VERSION_MANY_VOLUMES_PER_ARRAY "1.2.00"
--#define MPB_VERSION_3OR4_DISK_ARRAY "1.2.01"
--#define MPB_VERSION_RAID5 "1.2.02"
--#define MPB_VERSION_5OR6_DISK_ARRAY "1.2.04"
--#define MPB_VERSION_CNG "1.2.06"
-+
-+/* Legacy IMSM versions:
-+ * MPB_VERSION_RAID0 1.0.00
-+ * MPB_VERSION_RAID1 1.1.00
-+ * MPB_VERSION_MANY_VOLUMES_PER_ARRAY 1.2.00
-+ * MPB_VERSION_3OR4_DISK_ARRAY 1.2.01
-+ * MPB_VERSION_RAID5 1.2.02
-+ * MPB_VERSION_5OR6_DISK_ARRAY 1.2.04
-+ * MPB_VERSION_CNG 1.2.06
-+ */
-+
- #define MPB_VERSION_ATTRIBS "1.3.00"
-+#define MPB_VERSION_ATTRIBS_JD "2.0.00"
- #define MAX_SIGNATURE_LENGTH  32
- #define MAX_RAID_SERIAL_LEN   16
- 
-@@ -5512,51 +5517,46 @@ static unsigned long long info_to_blocks_per_member(mdu_array_info_t *info,
- 		return (size * 2) & ~(info_to_blocks_per_strip(info) - 1);
- }
- 
-+static void imsm_write_signature(struct imsm_super *mpb)
-+{
-+	/* It is safer to eventually truncate version rather than left it not NULL ended */
-+	snprintf((char *) mpb->sig, MAX_SIGNATURE_LENGTH, MPB_SIGNATURE MPB_VERSION_ATTRIBS);
-+}
-+
- static void imsm_update_version_info(struct intel_super *super)
- {
- 	/* update the version and attributes */
- 	struct imsm_super *mpb = super->anchor;
--	char *version;
- 	struct imsm_dev *dev;
- 	struct imsm_map *map;
- 	int i;
- 
-+	mpb->attributes |= MPB_ATTRIB_CHECKSUM_VERIFY;
-+
- 	for (i = 0; i < mpb->num_raid_devs; i++) {
- 		dev = get_imsm_dev(super, i);
- 		map = get_imsm_map(dev, MAP_0);
-+
- 		if (__le32_to_cpu(dev->size_high) > 0)
- 			mpb->attributes |= MPB_ATTRIB_2TB;
- 
--		/* FIXME detect when an array spans a port multiplier */
--		#if 0
--		mpb->attributes |= MPB_ATTRIB_PM;
--		#endif
--
--		if (mpb->num_raid_devs > 1 ||
--		    mpb->attributes != MPB_ATTRIB_CHECKSUM_VERIFY) {
--			version = MPB_VERSION_ATTRIBS;
--			switch (get_imsm_raid_level(map)) {
--			case 0: mpb->attributes |= MPB_ATTRIB_RAID0; break;
--			case 1: mpb->attributes |= MPB_ATTRIB_RAID1; break;
--			case 10: mpb->attributes |= MPB_ATTRIB_RAID10; break;
--			case 5: mpb->attributes |= MPB_ATTRIB_RAID5; break;
--			}
--		} else {
--			if (map->num_members >= 5)
--				version = MPB_VERSION_5OR6_DISK_ARRAY;
--			else if (dev->status == DEV_CLONE_N_GO)
--				version = MPB_VERSION_CNG;
--			else if (get_imsm_raid_level(map) == 5)
--				version = MPB_VERSION_RAID5;
--			else if (map->num_members >= 3)
--				version = MPB_VERSION_3OR4_DISK_ARRAY;
--			else if (get_imsm_raid_level(map) == 1)
--				version = MPB_VERSION_RAID1;
--			else
--				version = MPB_VERSION_RAID0;
-+		switch (get_imsm_raid_level(map)) {
-+		case IMSM_T_RAID0:
-+			mpb->attributes |= MPB_ATTRIB_RAID0;
-+			break;
-+		case IMSM_T_RAID1:
-+			mpb->attributes |= MPB_ATTRIB_RAID1;
-+			break;
-+		case IMSM_T_RAID5:
-+			mpb->attributes |= MPB_ATTRIB_RAID5;
-+			break;
-+		case IMSM_T_RAID10:
-+			mpb->attributes |= MPB_ATTRIB_RAID10;
-+			break;
- 		}
--		strcpy(((char *) mpb->sig) + strlen(MPB_SIGNATURE), version);
- 	}
-+
-+	imsm_write_signature(mpb);
- }
- 
- /**
-@@ -5785,7 +5785,6 @@ static int init_super_imsm(struct supertype *st, mdu_array_info_t *info,
- 	struct intel_super *super;
- 	struct imsm_super *mpb;
- 	size_t mpb_size;
--	char *version;
- 
- 	if (data_offset != INVALID_SECTORS) {
- 		pr_err("data-offset not supported by imsm\n");
-@@ -5828,13 +5827,7 @@ static int init_super_imsm(struct supertype *st, mdu_array_info_t *info,
- 		return 0;
- 	}
- 
--	mpb->attributes = MPB_ATTRIB_CHECKSUM_VERIFY;
--
--	version = (char *) mpb->sig;
--	strcpy(version, MPB_SIGNATURE);
--	version += strlen(MPB_SIGNATURE);
--	strcpy(version, MPB_VERSION_RAID0);
--
-+	imsm_update_version_info(super);
- 	return 1;
- }
- 
-@@ -6208,7 +6201,6 @@ static union {
- 
- static int write_super_imsm_spare(struct intel_super *super, struct dl *d)
- {
--	struct imsm_super *mpb = super->anchor;
- 	struct imsm_super *spare = &spare_record.anchor;
- 	__u32 sum;
- 
-@@ -6217,14 +6209,11 @@ static int write_super_imsm_spare(struct intel_super *super, struct dl *d)
- 
- 	spare->mpb_size = __cpu_to_le32(sizeof(struct imsm_super));
- 	spare->generation_num = __cpu_to_le32(1UL);
--	spare->attributes = MPB_ATTRIB_CHECKSUM_VERIFY;
- 	spare->num_disks = 1;
- 	spare->num_raid_devs = 0;
--	spare->cache_size = mpb->cache_size;
- 	spare->pwr_cycle_count = __cpu_to_le32(1);
- 
--	snprintf((char *) spare->sig, MAX_SIGNATURE_LENGTH,
--		 MPB_SIGNATURE MPB_VERSION_RAID0);
-+	imsm_write_signature(spare);
- 
- 	spare->disk[0] = d->disk;
- 	if (__le32_to_cpu(d->disk.total_blocks_hi) > 0)
--- 
-2.41.0
-

0057-imsm-define-RAID_10-attribute.patch

@@ -1,67 +0,0 @@
-From 610fc2ee6fc09e828b14e8fa221b3f4f70fc7b2b Mon Sep 17 00:00:00 2001
-From: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Date: Mon, 29 Apr 2024 15:07:18 +0200
-Subject: [PATCH 57/66] imsm: define RAID_10 attribute
-
-Add MPB_ATTRIB_RAID10_EXT attribute to support RAID 10
-with more than 4 drives.
-
-Allow more than 4 drives in imsm_orom_support_raid_disks_raid10().
-
-This is one of last patches for introducing R10D4+ to imsm.
-Only small adjustments in reshape behaviours are needed.
-
-Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- platform-intel.c | 3 ++-
- super-intel.c    | 5 +++++
- 2 files changed, 7 insertions(+), 1 deletion(-)
-
-diff --git a/platform-intel.c b/platform-intel.c
-index 40e8fb82..15a9fa5a 100644
---- a/platform-intel.c
-+++ b/platform-intel.c
-@@ -76,7 +76,8 @@ static bool imsm_orom_support_raid_disks_count_raid5(const int raid_disks)
- 
- static bool imsm_orom_support_raid_disks_count_raid10(const int raid_disks)
- {
--	if (raid_disks == 4)
-+	/* raid_disks count must be higher than 4 and even */
-+	if (raid_disks >= 4 && (raid_disks & 1) == 0)
- 		return true;
- 	return false;
- }
-diff --git a/super-intel.c b/super-intel.c
-index 4b168add..2d309316 100644
---- a/super-intel.c
-+++ b/super-intel.c
-@@ -62,6 +62,8 @@
- #define MPB_ATTRIB_RAIDCNG		__cpu_to_le32(0x00000020)
- /* supports expanded stripe sizes of  256K, 512K and 1MB */
- #define MPB_ATTRIB_EXP_STRIPE_SIZE	__cpu_to_le32(0x00000040)
-+/* supports RAID10 with more than 4 drives */
-+#define MPB_ATTRIB_RAID10_EXT		__cpu_to_le32(0x00000080)
- 
- /* The OROM Support RST Caching of Volumes */
- #define MPB_ATTRIB_NVM			__cpu_to_le32(0x02000000)
-@@ -89,6 +91,7 @@
- 					MPB_ATTRIB_RAID10          | \
- 					MPB_ATTRIB_RAID5           | \
- 					MPB_ATTRIB_EXP_STRIPE_SIZE | \
-+					MPB_ATTRIB_RAID10_EXT      | \
- 					MPB_ATTRIB_BBM)
- 
- /* Define attributes that are unused but not harmful */
-@@ -5552,6 +5555,8 @@ static void imsm_update_version_info(struct intel_super *super)
- 			break;
- 		case IMSM_T_RAID10:
- 			mpb->attributes |= MPB_ATTRIB_RAID10;
-+			if (map->num_members > 4)
-+				mpb->attributes |= MPB_ATTRIB_RAID10_EXT;
- 			break;
- 		}
- 	}
--- 
-2.41.0
-

0058-imsm-simplify-imsm_check_attributes.patch

@@ -1,153 +0,0 @@
-From e0e56f4b2ed514f5049eb96b4ff8f7fdf30a4c49 Mon Sep 17 00:00:00 2001
-From: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Date: Mon, 29 Apr 2024 15:07:19 +0200
-Subject: [PATCH 58/66] imsm: simplify imsm_check_attributes()
-
-imsm_check_attributes() is too complex for that it really does.
-
-Remove repeating code and simplify the function.
-Fix function calls.
-
-Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- super-intel.c | 106 ++++++++------------------------------------------
- 1 file changed, 16 insertions(+), 90 deletions(-)
-
-diff --git a/super-intel.c b/super-intel.c
-index 2d309316..d60915e8 100644
---- a/super-intel.c
-+++ b/super-intel.c
-@@ -2135,91 +2135,18 @@ void convert_from_4k(struct intel_super *super)
- 	mpb->check_sum = __gen_imsm_checksum(mpb);
- }
- 
--/*******************************************************************************
-- * function: imsm_check_attributes
-- * Description: Function checks if features represented by attributes flags
-- *		are supported by mdadm.
-- * Parameters:
-- *		attributes - Attributes read from metadata
-- * Returns:
-- *		0 - passed attributes contains unsupported features flags
-- *		1 - all features are supported
-- ******************************************************************************/
--static int imsm_check_attributes(__u32 attributes)
-+/**
-+ * imsm_check_attributes() - Check if features represented by attributes flags are supported.
-+ *
-+ * @attributes: attributes read from metadata.
-+ * Returns: true if all features are supported, false otherwise.
-+ */
-+static bool imsm_check_attributes(__u32 attributes)
- {
--	int ret_val = 1;
--	__u32 not_supported = MPB_ATTRIB_SUPPORTED^0xffffffff;
--
--	not_supported &= ~MPB_ATTRIB_IGNORED;
--
--	not_supported &= attributes;
--	if (not_supported) {
--		pr_err("(IMSM): Unsupported attributes : %x\n",
--			(unsigned)__le32_to_cpu(not_supported));
--		if (not_supported & MPB_ATTRIB_CHECKSUM_VERIFY) {
--			dprintf("\t\tMPB_ATTRIB_CHECKSUM_VERIFY \n");
--			not_supported ^= MPB_ATTRIB_CHECKSUM_VERIFY;
--		}
--		if (not_supported & MPB_ATTRIB_2TB) {
--			dprintf("\t\tMPB_ATTRIB_2TB\n");
--			not_supported ^= MPB_ATTRIB_2TB;
--		}
--		if (not_supported & MPB_ATTRIB_RAID0) {
--			dprintf("\t\tMPB_ATTRIB_RAID0\n");
--			not_supported ^= MPB_ATTRIB_RAID0;
--		}
--		if (not_supported & MPB_ATTRIB_RAID1) {
--			dprintf("\t\tMPB_ATTRIB_RAID1\n");
--			not_supported ^= MPB_ATTRIB_RAID1;
--		}
--		if (not_supported & MPB_ATTRIB_RAID10) {
--			dprintf("\t\tMPB_ATTRIB_RAID10\n");
--			not_supported ^= MPB_ATTRIB_RAID10;
--		}
--		if (not_supported & MPB_ATTRIB_RAID1E) {
--			dprintf("\t\tMPB_ATTRIB_RAID1E\n");
--			not_supported ^= MPB_ATTRIB_RAID1E;
--		}
--		if (not_supported & MPB_ATTRIB_RAID5) {
--		dprintf("\t\tMPB_ATTRIB_RAID5\n");
--			not_supported ^= MPB_ATTRIB_RAID5;
--		}
--		if (not_supported & MPB_ATTRIB_RAIDCNG) {
--			dprintf("\t\tMPB_ATTRIB_RAIDCNG\n");
--			not_supported ^= MPB_ATTRIB_RAIDCNG;
--		}
--		if (not_supported & MPB_ATTRIB_BBM) {
--			dprintf("\t\tMPB_ATTRIB_BBM\n");
--		not_supported ^= MPB_ATTRIB_BBM;
--		}
--		if (not_supported & MPB_ATTRIB_CHECKSUM_VERIFY) {
--			dprintf("\t\tMPB_ATTRIB_CHECKSUM_VERIFY (== MPB_ATTRIB_LEGACY)\n");
--			not_supported ^= MPB_ATTRIB_CHECKSUM_VERIFY;
--		}
--		if (not_supported & MPB_ATTRIB_EXP_STRIPE_SIZE) {
--			dprintf("\t\tMPB_ATTRIB_EXP_STRIP_SIZE\n");
--			not_supported ^= MPB_ATTRIB_EXP_STRIPE_SIZE;
--		}
--		if (not_supported & MPB_ATTRIB_2TB_DISK) {
--			dprintf("\t\tMPB_ATTRIB_2TB_DISK\n");
--			not_supported ^= MPB_ATTRIB_2TB_DISK;
--		}
--		if (not_supported & MPB_ATTRIB_NEVER_USE2) {
--			dprintf("\t\tMPB_ATTRIB_NEVER_USE2\n");
--			not_supported ^= MPB_ATTRIB_NEVER_USE2;
--		}
--		if (not_supported & MPB_ATTRIB_NEVER_USE) {
--			dprintf("\t\tMPB_ATTRIB_NEVER_USE\n");
--			not_supported ^= MPB_ATTRIB_NEVER_USE;
--		}
--
--		if (not_supported)
--			dprintf("(IMSM): Unknown attributes : %x\n", not_supported);
--
--		ret_val = 0;
--	}
-+	if ((attributes & (MPB_ATTRIB_SUPPORTED | MPB_ATTRIB_IGNORED)) == attributes)
-+		return true;
- 
--	return ret_val;
-+	return false;
- }
- 
- static void getinfo_super_imsm(struct supertype *st, struct mdinfo *info, char *map);
-@@ -2247,11 +2174,10 @@ static void examine_super_imsm(struct supertype *st, char *homehost)
- 	creation_time = __le64_to_cpu(mpb->creation_time);
- 	printf("  Creation Time : %.24s\n",
- 		creation_time ? ctime(&creation_time) : "Unknown");
--	printf("     Attributes : ");
--	if (imsm_check_attributes(mpb->attributes))
--		printf("All supported\n");
--	else
--		printf("not supported\n");
-+
-+	printf("     Attributes : %08x (%s)\n", mpb->attributes,
-+	       imsm_check_attributes(mpb->attributes) ? "supported" : "not supported");
-+
- 	getinfo_super_imsm(st, &info, NULL);
- 	fname_from_uuid(&info, nbuf);
- 	printf("           UUID : %s\n", nbuf + 5);
-@@ -8182,9 +8108,9 @@ static struct mdinfo *container_content_imsm(struct supertype *st, char *subarra
- 	int current_vol = super->current_vol;
- 
- 	/* do not assemble arrays when not all attributes are supported */
--	if (imsm_check_attributes(mpb->attributes) == 0) {
-+	if (imsm_check_attributes(mpb->attributes) == false) {
- 		sb_errors = 1;
--		pr_err("Unsupported attributes in IMSM metadata.Arrays activation is blocked.\n");
-+		pr_err("Unsupported attributes in IMSM metadata. Arrays activation is blocked.\n");
- 	}
- 
- 	/* count spare devices, not used in maps
--- 
-2.41.0
-

0059-imsm-support-RAID-10-with-more-than-4-drives.patch

@@ -1,168 +0,0 @@
-From 44463edeb303a464c4a44fcea184b267aeb53302 Mon Sep 17 00:00:00 2001
-From: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Date: Mon, 29 Apr 2024 15:07:20 +0200
-Subject: [PATCH 59/66] imsm: support RAID 10 with more than 4 drives
-
-VROC UEFI driver does not support RAID 10 with more than 4 drives.
-Add user prompts if such layout is being created and for R0->R10
-reshapes.
-
-Refactor ask() function:
-- simplify the code,
-- remove dialog reattempts,
-- do no pass '?' sign on function calls,
-- highlight default option on output.
-
-This patch completes adding support for R10D4+ to IMSM.
-
-Signed-off-by: Mateusz Kusiak <mateusz.kusiak@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Create.c      |  9 ++++++++-
- super-intel.c | 14 ++++++++++++--
- util.c        | 39 +++++++++++++++++++++++++--------------
- 3 files changed, 45 insertions(+), 17 deletions(-)
-
-diff --git a/Create.c b/Create.c
-index d94253b1..d033eb68 100644
---- a/Create.c
-+++ b/Create.c
-@@ -965,6 +965,13 @@ int Create(struct supertype *st, struct mddev_ident *ident, int subdevs,
- 		return 1;
- 	}
- 
-+	if (st->ss == &super_imsm && s->level == 10 && s->raiddisks > 4) {
-+		/* Print no matter runstop was specifed */
-+		pr_err("Warning! VROC UEFI driver does not support RAID10 in requested layout.\n");
-+		pr_err("Array won't be suitable as boot device.\n");
-+		warn = 1;
-+	}
-+
- 	if (!have_container && s->level > 0 && ((maxsize-s->size)*100 > maxsize)) {
- 		if (c->runstop != 1 || c->verbose >= 0)
- 			pr_err("largest drive (%s) exceeds size (%lluK) by more than 1%%\n",
-@@ -984,7 +991,7 @@ int Create(struct supertype *st, struct mddev_ident *ident, int subdevs,
- 
- 	if (warn) {
- 		if (c->runstop!= 1) {
--			if (!ask("Continue creating array? ")) {
-+			if (!ask("Continue creating array")) {
- 				pr_err("create aborted.\n");
- 				return 1;
- 			}
-diff --git a/super-intel.c b/super-intel.c
-index d60915e8..2b8b6fda 100644
---- a/super-intel.c
-+++ b/super-intel.c
-@@ -523,6 +523,7 @@ enum imsm_reshape_type {
- 	CH_TAKEOVER,
- 	CH_MIGRATION,
- 	CH_ARRAY_SIZE,
-+	CH_ABORT
- };
- 
- /* definition of messages passed to imsm_process_update */
-@@ -11898,7 +11899,7 @@ success:
- ****************************************************************************/
- enum imsm_reshape_type imsm_analyze_change(struct supertype *st,
- 					   struct geo_params *geo,
--					   int direction)
-+					   int direction, struct context *c)
- {
- 	struct mdinfo info;
- 	int change = -1;
-@@ -11925,6 +11926,14 @@ enum imsm_reshape_type imsm_analyze_change(struct supertype *st,
- 				check_devs = 1;
- 				raid_disks += 1; /* parity disk added */
- 			} else if (geo->level == IMSM_T_RAID10) {
-+				if (geo->level == IMSM_T_RAID10 && geo->raid_disks > 2 &&
-+				    !c->force) {
-+					pr_err("Warning! VROC UEFI driver does not support RAID10 in requested layout.\n");
-+					pr_err("Array won't be suitable as boot device.\n");
-+					pr_err("Note: You can omit this check with \"--force\"\n");
-+					if (ask("Do you want to continue") < 1)
-+						return CH_ABORT;
-+				}
- 				change = CH_TAKEOVER;
- 				check_devs = 1;
- 				raid_disks *= 2; /* mirrors added */
-@@ -12219,7 +12228,7 @@ static int imsm_reshape_super(struct supertype *st, struct shape *shape, struct
- 			goto exit_imsm_reshape_super;
- 		}
- 		super->current_vol = dev->index;
--		change = imsm_analyze_change(st, &geo, shape->direction);
-+		change = imsm_analyze_change(st, &geo, shape->direction, c);
- 		switch (change) {
- 		case CH_TAKEOVER:
- 			ret_val = imsm_takeover(st, &geo);
-@@ -12262,6 +12271,7 @@ static int imsm_reshape_super(struct supertype *st, struct shape *shape, struct
- 				free(u);
- 		}
- 		break;
-+		case CH_ABORT:
- 		default:
- 			ret_val = 1;
- 		}
-diff --git a/util.c b/util.c
-index 9e837045..4fbf11c4 100644
---- a/util.c
-+++ b/util.c
-@@ -725,23 +725,33 @@ int stat_is_blkdev(char *devname, dev_t *rdev)
- 	return 1;
- }
- 
-+/**
-+ * ask() - prompt user for "yes/no" dialog.
-+ * @mesg: message to be printed, without '?' sign.
-+ * Returns: 1 if 'Y/y', 0 otherwise.
-+ *
-+ * The default value is 'N/n', thus the caps on "N" on prompt.
-+ */
- int ask(char *mesg)
- {
--	char *add = "";
--	int i;
--	for (i = 0; i < 5; i++) {
--		char buf[100];
--		fprintf(stderr, "%s%s", mesg, add);
--		fflush(stderr);
--		if (fgets(buf, 100, stdin)==NULL)
--			return 0;
--		if (buf[0]=='y' || buf[0]=='Y')
--			return 1;
--		if (buf[0]=='n' || buf[0]=='N')
--			return 0;
--		add = "(y/n) ";
-+	char buf[3] = {0};
-+
-+	fprintf(stderr, "%s [y/N]? ", mesg);
-+	fflush(stderr);
-+	if (fgets(buf, 3, stdin) == NULL)
-+		return 0;
-+	if (strlen(buf) == 1) {
-+		pr_err("assuming no.\n");
-+		return 0;
- 	}
--	pr_err("assuming 'no'\n");
-+	if (buf[1] != '\n')
-+		goto bad_option;
-+	if (toupper(buf[0]) == 'Y')
-+		return 1;
-+	if (toupper(buf[0]) == 'N')
-+		return 0;
-+bad_option:
-+	pr_err("bad option.\n");
- 	return 0;
- }
- 
-@@ -1868,6 +1878,7 @@ int set_array_info(int mdfd, struct supertype *st, struct mdinfo *info)
- 
- 	if (st->ss->external)
- 		return sysfs_set_array(info);
-+
- 	memset(&inf, 0, sizeof(inf));
- 	inf.major_version = info->array.major_version;
- 	inf.minor_version = info->array.minor_version;
--- 
-2.41.0
-

0060-tests-01r5fail-enhance.patch

@@ -1,41 +0,0 @@
-From d399c494c6364a6b6d0f965c08443fdc79d1e248 Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Thu, 18 Apr 2024 18:23:19 +0800
-Subject: [PATCH 60/66] tests/01r5fail enhance
-
-After removing dev0, the recovery starts because it already has a spare
-disk. It's good to check recovery. But it's not right to check recovery
-after adding dev3. Because the recovery may finish. It depends on the
-recovery performance of the testing machine. If the recovery finishes,
-it will fail. But dev3 is only added as a spare disk, we can't expect
-there is a recovery happens.
-
-So remove the codes about adding dev3.
-
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- tests/01r5fail | 6 +-----
- 1 file changed, 1 insertion(+), 5 deletions(-)
-
-diff --git a/tests/01r5fail b/tests/01r5fail
-index 873dba58..c210d6e7 100644
---- a/tests/01r5fail
-+++ b/tests/01r5fail
-@@ -17,11 +17,7 @@ check wait
- mdadm $md0 --fail $dev0
- mdadm $md0 --remove $dev3 $dev0
- check recovery
--check state _UUU
--
--mdadm $md0 -a $dev3
--check recovery
- check wait
- check state UUUU
- 
--mdadm -S $md0
-\ No newline at end of file
-+mdadm -S $md0
--- 
-2.41.0
-

0061-tests-01r5integ.broken.patch

@@ -1,32 +0,0 @@
-From a20cb3872c02241e4f0f7cc26933a43bac7d1cbb Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Thu, 18 Apr 2024 18:23:20 +0800
-Subject: [PATCH 61/66] tests/01r5integ.broken
-
-01r5integ can be run successfully 152 times without error with
-kernel 6.9.0-rc4 and mdadm - v4.3-51-g52bead95. So remove this
-one broken case.
-
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- tests/01r5integ.broken | 7 -------
- 1 file changed, 7 deletions(-)
- delete mode 100644 tests/01r5integ.broken
-
-diff --git a/tests/01r5integ.broken b/tests/01r5integ.broken
-deleted file mode 100644
-index 20737637..00000000
---- a/tests/01r5integ.broken
-+++ /dev/null
-@@ -1,7 +0,0 @@
--fails rarely
--
--Fails about 1 in every 30 runs with a sha mismatch error:
--
--    c49ab26e1b01def7874af9b8a6d6d0c29fdfafe6 /dev/md0 does not match
--    15dc2f73262f811ada53c65e505ceec9cf025cb9 /dev/md0 with /dev/loop3
--    missing
--- 
-2.41.0
-

0062-tests-01raid6integ.broken-can-be-removed.patch

@@ -1,31 +0,0 @@
-From 896948b14ad26f15590269dce50ac4896284dc29 Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Thu, 18 Apr 2024 18:23:21 +0800
-Subject: [PATCH 62/66] tests/01raid6integ.broken can be removed
-
-01raid6integ can be run successfully with kernel 6.9.0-rc3.
-So remove 01raid6integ.broken.
-
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- tests/01raid6integ.broken | 7 -------
- 1 file changed, 7 deletions(-)
- delete mode 100644 tests/01raid6integ.broken
-
-diff --git a/tests/01raid6integ.broken b/tests/01raid6integ.broken
-deleted file mode 100644
-index 1df735f0..00000000
---- a/tests/01raid6integ.broken
-+++ /dev/null
-@@ -1,7 +0,0 @@
--fails infrequently
--
--Fails about 1 in 5 with a sha mismatch:
--
--    8286c2bc045ae2cfe9f8b7ae3a898fa25db6926f /dev/md0 does not match
--    a083a0738b58caab37fd568b91b177035ded37df /dev/md0 with /dev/loop2 and
--    /dev/loop3 missing
--- 
-2.41.0
-

0063-Makefile-Move-pie-to-LDFLAGS.patch

@@ -1,38 +0,0 @@
-From 893a55831e5abbcd15b171db66fa1f389fb61506 Mon Sep 17 00:00:00 2001
-From: Fabrice Fontaine <fontaine.fabrice@gmail.com>
-Date: Tue, 7 May 2024 19:32:16 +0200
-Subject: [PATCH 63/66] Makefile: Move -pie to LDFLAGS
-
-Move -pie from LDLIBS to LDFLAGS and make LDFLAGS configurable to allow
-the user to drop it by setting their own LDFLAGS (e.g. PIE could be
-enabled or disabled by the buildsystem such as buildroot).
-
-Suggested-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Makefile | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/Makefile b/Makefile
-index 7c221a89..adac7905 100644
---- a/Makefile
-+++ b/Makefile
-@@ -132,12 +132,12 @@ CFLAGS += -DUSE_PTHREADS
- MON_LDFLAGS += -pthread
- endif
- 
--LDFLAGS = -Wl,-z,now,-z,noexecstack
-+LDFLAGS ?= -pie -Wl,-z,now,-z,noexecstack
- 
- # If you want a static binary, you might uncomment these
- # LDFLAGS += -static
- # STRIP = -s
--LDLIBS = -ldl -pie
-+LDLIBS = -ldl
- 
- # To explicitly disable libudev, set -DNO_LIBUDEV in CXFLAGS
- ifeq (, $(findstring -DNO_LIBUDEV,  $(CXFLAGS)))
--- 
-2.41.0
-

0064-tests-23rdev-lifetime-fix-a-typo.patch

@@ -1,30 +0,0 @@
-From a0174749426f49a04f11ae0e728cb0a681bfa465 Mon Sep 17 00:00:00 2001
-From: Yu Kuai <yukuai3@huawei.com>
-Date: Thu, 9 May 2024 09:10:59 +0800
-Subject: [PATCH 64/66] tests/23rdev-lifetime: fix a typo
-
-"pill" was wrong, while it should be "kill", test will still pass while
-test thread will not be cleaned up.
-
-Signed-off-by: Yu Kuai <yukuai3@huawei.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- tests/23rdev-lifetime | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/tests/23rdev-lifetime b/tests/23rdev-lifetime
-index 1750b0db..03b61de4 100644
---- a/tests/23rdev-lifetime
-+++ b/tests/23rdev-lifetime
-@@ -4,7 +4,7 @@ pid=""
- runtime=2
- 
- clean_up_test() {
--	pill -9 $pid
-+	kill -9 $pid
- 	echo clear > /sys/block/md0/md/array_state
- }
- 
--- 
-2.41.0
-

0065-util.c-change-devnm-to-const-in-mdmon-functions.patch

@@ -1,55 +0,0 @@
-From b0f4e8e30f38d83f7e3f53d01d72d4cb3b4d42d7 Mon Sep 17 00:00:00 2001
-From: Kinga Stefaniuk <kinga.stefaniuk@intel.com>
-Date: Tue, 7 May 2024 05:38:55 +0200
-Subject: [PATCH 65/66] util.c: change devnm to const in mdmon functions
-
-Devnm shall not be changed inside mdmon_running()
-and mdmon_pid() functions, change this parameter to const.
-
-Signed-off-by: Kinga Stefaniuk <kinga.stefaniuk@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- mdadm.h | 4 ++--
- util.c  | 4 ++--
- 2 files changed, 4 insertions(+), 4 deletions(-)
-
-diff --git a/mdadm.h b/mdadm.h
-index 2ff3e463..1ba541fc 100644
---- a/mdadm.h
-+++ b/mdadm.h
-@@ -1768,8 +1768,8 @@ extern int is_subarray_active(char *subarray, char *devname);
- extern int open_subarray(char *dev, char *subarray, struct supertype *st, int quiet);
- extern struct superswitch *version_to_superswitch(char *vers);
- 
--extern int mdmon_running(char *devnm);
--extern int mdmon_pid(char *devnm);
-+extern int mdmon_running(const char *devnm);
-+extern int mdmon_pid(const char *devnm);
- extern int check_env(char *name);
- extern __u32 random32(void);
- extern void random_uuid(__u8 *buf);
-diff --git a/util.c b/util.c
-index 4fbf11c4..e2b490e1 100644
---- a/util.c
-+++ b/util.c
-@@ -1902,7 +1902,7 @@ unsigned long long min_recovery_start(struct mdinfo *array)
- 	return recovery_start;
- }
- 
--int mdmon_pid(char *devnm)
-+int mdmon_pid(const char *devnm)
- {
- 	char path[100];
- 	char pid[10];
-@@ -1922,7 +1922,7 @@ int mdmon_pid(char *devnm)
- 	return atoi(pid);
- }
- 
--int mdmon_running(char *devnm)
-+int mdmon_running(const char *devnm)
- {
- 	int pid = mdmon_pid(devnm);
- 	if (pid <= 0)
--- 
-2.41.0
-

0066-Wait-for-mdmon-when-it-is-stared-via-systemd.patch

@@ -1,121 +0,0 @@
-From aa1cc5815d2b14a8b47add18cfaa8264e19c10ce Mon Sep 17 00:00:00 2001
-From: Kinga Stefaniuk <kinga.stefaniuk@intel.com>
-Date: Tue, 7 May 2024 05:38:56 +0200
-Subject: [PATCH 66/66] Wait for mdmon when it is stared via systemd
-
-When mdmon is being started it may need few seconds to start.
-For now, we didn't wait for it. Introduce wait_for_mdmon()
-function, which waits up to 5 seconds for mdmon to start completely.
-
-Signed-off-by: Kinga Stefaniuk <kinga.stefaniuk@intel.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Assemble.c |  4 ++--
- Grow.c     |  7 ++++---
- mdadm.h    |  2 ++
- util.c     | 29 +++++++++++++++++++++++++++++
- 4 files changed, 37 insertions(+), 5 deletions(-)
-
-diff --git a/Assemble.c b/Assemble.c
-index f5e9ab1f..83dced19 100644
---- a/Assemble.c
-+++ b/Assemble.c
-@@ -2173,8 +2173,8 @@ int assemble_container_content(struct supertype *st, int mdfd,
- 			if (!mdmon_running(st->container_devnm))
- 				start_mdmon(st->container_devnm);
- 			ping_monitor(st->container_devnm);
--			if (mdmon_running(st->container_devnm) &&
--			    st->update_tail == NULL)
-+			if (wait_for_mdmon(st->container_devnm) == MDADM_STATUS_SUCCESS &&
-+			    !st->update_tail)
- 				st->update_tail = &st->updates;
- 		}
- 
-diff --git a/Grow.c b/Grow.c
-index 87ed9214..1923c27c 100644
---- a/Grow.c
-+++ b/Grow.c
-@@ -2134,7 +2134,7 @@ int Grow_reshape(char *devname, int fd,
- 			if (!mdmon_running(st->container_devnm))
- 				start_mdmon(st->container_devnm);
- 			ping_monitor(container);
--			if (mdmon_running(st->container_devnm) == false) {
-+			if (wait_for_mdmon(st->container_devnm) != MDADM_STATUS_SUCCESS) {
- 				pr_err("No mdmon found. Grow cannot continue.\n");
- 				goto release;
- 			}
-@@ -3218,7 +3218,8 @@ static int reshape_array(char *container, int fd, char *devname,
- 			if (!mdmon_running(container))
- 				start_mdmon(container);
- 			ping_monitor(container);
--			if (mdmon_running(container) && st->update_tail == NULL)
-+			if (wait_for_mdmon(container) == MDADM_STATUS_SUCCESS &&
-+			    !st->update_tail)
- 				st->update_tail = &st->updates;
- 		}
- 	}
-@@ -5173,7 +5174,7 @@ int Grow_continue_command(char *devname, int fd, struct context *c)
- 			start_mdmon(container);
- 		ping_monitor(container);
- 
--		if (mdmon_running(container) == false) {
-+		if (wait_for_mdmon(container) != MDADM_STATUS_SUCCESS) {
- 			pr_err("No mdmon found. Grow cannot continue.\n");
- 			ret_val = 1;
- 			goto Grow_continue_command_exit;
-diff --git a/mdadm.h b/mdadm.h
-index 1ba541fc..b71d7b32 100644
---- a/mdadm.h
-+++ b/mdadm.h
-@@ -1770,6 +1770,8 @@ extern struct superswitch *version_to_superswitch(char *vers);
- 
- extern int mdmon_running(const char *devnm);
- extern int mdmon_pid(const char *devnm);
-+extern mdadm_status_t wait_for_mdmon(const char *devnm);
-+
- extern int check_env(char *name);
- extern __u32 random32(void);
- extern void random_uuid(__u8 *buf);
-diff --git a/util.c b/util.c
-index e2b490e1..bf79742f 100644
---- a/util.c
-+++ b/util.c
-@@ -1932,6 +1932,35 @@ int mdmon_running(const char *devnm)
- 	return 0;
- }
- 
-+/*
-+ * wait_for_mdmon() - Waits for mdmon within specified time.
-+ * @devnm: Device for which mdmon should start.
-+ *
-+ * Function waits for mdmon to start. It may need few seconds
-+ * to start, we set timeout to 5, it should be sufficient.
-+ * Do not wait if mdmon has been started.
-+ *
-+ * Return: MDADM_STATUS_SUCCESS if mdmon is running, error code otherwise.
-+ */
-+mdadm_status_t wait_for_mdmon(const char *devnm)
-+{
-+	const time_t mdmon_timeout = 5;
-+	time_t start_time = time(0);
-+
-+	if (mdmon_running(devnm))
-+		return MDADM_STATUS_SUCCESS;
-+
-+	pr_info("Waiting for mdmon to start\n");
-+	while (time(0) - start_time < mdmon_timeout) {
-+		sleep_for(0, MSEC_TO_NSEC(200), true);
-+		if (mdmon_running(devnm))
-+			return MDADM_STATUS_SUCCESS;
-+	};
-+
-+	pr_err("Timeout waiting for mdmon\n");
-+	return MDADM_STATUS_ERROR;
-+}
-+
- int start_mdmon(char *devnm)
- {
- 	int i;
--- 
-2.41.0
-

0067-mdadm-Change-main-repository-to-Github.patch

@@ -1,193 +0,0 @@
-From 3f90be087fa62c0c7ed76c2ac26752f0ac3a89e7 Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Tue, 7 May 2024 17:35:09 +0200
-Subject: [PATCH 067/201] mdadm: Change main repository to Github
-
-Now github will be used for tracking mdadm, adjust README.md.
-Daily routines will be automated on Github, there is not need to
-decribe them.
-
-Adjust release process, it must be published to both repositories.
-
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- MAINTAINERS.md | 41 ++++++++----------------
- README.md      | 86 ++++++++++++++++++++++++++++----------------------
- 2 files changed, 61 insertions(+), 66 deletions(-)
-
-diff --git a/MAINTAINERS.md b/MAINTAINERS.md
-index 9c79ba87..e5b635f0 100644
---- a/MAINTAINERS.md
-+++ b/MAINTAINERS.md
-@@ -1,44 +1,29 @@
- # Maintainer tools
- 
--Useful tools used in daily routines:
-+Useful tools for mdadm maintenance:
- - [checkpatch](https://docs.kernel.org/dev-tools/checkpatch.html)
- - [kup](https://korg.docs.kernel.org/kup.html)
- - [Auto-publishing](https://korg.docs.kernel.org/kup.html#auto-publishing-with-git-archive-signer)
- - [b4](https://b4.docs.kernel.org/en/latest/)
- 
--# Checklist before applying patch
--
--We don't have CI testing yet, so all those steps must be performed manually:
--- Style check with [checkpatch](https://docs.kernel.org/dev-tools/checkpatch.html):
--
--  This is the current code style follows. We are not strict to all rules. It must be run
--  by **checkpatch --no-tree**, see README.md.
--
--- [Commit style](https://www.kernel.org/doc/html/v4.10/process/submitting-patches.html):
--
--  It doesn't need to be followed as strictly as is in kernel but changes should be logically
--  separated. Submitter should care at least to mention "It is used in next patches" if unused
--  externs/files are added in patch. We love: *Reported-by:*, *Suggested-by:*, *Fixes:* tags.
--
--- Compilation, ideally on various gcc versions.
--- Mdadm test suite execution.
--- Consider requesting new tests from submitter, especially for new functionalities.
--- Ensure that maintainer *sign-off* is added, before pushing.
--
- # Making a release
- 
- Assuming that maintainer is certain that release is safe, following steps must be done:
- 
--- Update versions strings in release commit, please refer to previous releases for examples.
-+- Make and push release commit:
-+  - Update versions strings, refer to previous releases for examples.
-+  - Update CHANGELOG.md.
-+
-+- Create GPG signed tag and push it to both remotes. Use same format as was used previously,
-+  prefixed by **mdadm-**, e.g. **mdadm-3.1.2**, **mdadm-4.1**.
- 
--- Create GPG signed tag and push it to repo. Use same format as was used previously, prefixed by
--  **mdadm-**, e.g. **mdadm-3.1.2**, **mdadm-4.1**.
-+- Run kernel.org
-+  [Auto-publishing](https://korg.docs.kernel.org/kup.html#auto-publishing-with-git-archive-signer):
- 
--- [Auto-publishing](https://korg.docs.kernel.org/kup.html#auto-publishing-with-git-archive-signer):
-+  Adopt script to our release tag model. When ready, push signed note to kernel.org repository. If
-+  it is done correctly, then *(sig)* is added to the package automatically generated by
-+  kernel.org automation. There is no need to upload archive manually.
- 
--  Adopt script to our release tag model. When ready, push signed note to repository. If it is done
--  correctly, then *(sig)* is added to the package automatically generated by kernel.org automation.
--  There is no need to upload archive manually.
-+- Add release entry on Github.
- 
--- Update CHANGELOG.md.
- - Write "ANNOUNCE" mail to linux-raid@kernel.org to notify community.
-diff --git a/README.md b/README.md
-index 64f2ecec..486c8929 100644
---- a/README.md
-+++ b/README.md
-@@ -20,58 +20,68 @@
-     **IMPORTANT:** DDF is in **maintenance only** mode. There is no active development around it.
-     Please do not use it in new solutions.
- 
--# How to Contribute
--
-- **mdadm** is hosted on [kernel.org](https://kernel.org/). You can access repository
--[here](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git).
-+# Questions and Support
-+
-+This Github site is **not** right place to ask if your are looking for:
-+- support from Linux Raid Community;
-+- support with kernel issues;
-+
-+This is the place where development of mdadm application is done. Please, do not use for
-+looking for support. You should always ask on [Mailing List](https://lore.kernel.org/linux-raid/).
-+
-+Please use issues if you have confirmation that issue you are experiencing is related to mdadm
-+components:
-+- mdadm;
-+- mdmon;
-+- raid6check;
-+- swap_super;
-+- test_stripe;
-+- systemd services ( see systemd/);
-+- udev rules;
-+- manual pages (including md.man)
-+
-+For example:
-+- mdadm issues (e.g segfaults, memory leaks, crashes, bad communication with MD driver);
-+- feature requests for mdadm;
-+- suggestions or minor fixes requested (e.g. better error messages);
-+
-+Generally, if you are not sure it is better to ask on
-+[Mailing List](https://lore.kernel.org/linux-raid/) first.
- 
--It is maintained similarly to kernel, using *mailing list*. Patches must be send through email.
--Please familiarize with general kernel
--[submitting patches](https://www.kernel.org/doc/html/v4.17/process/submitting-patches.html)
--documentation. Formatting, tags and commit message guidelines applies to **mdadm**.
-+# How to Contribute
- 
--## Sending patches step-by-step
-+Effective immediately [Github](https://github.com/md-raid-utilities/mdadm) is the primary
-+location for **mdadm**. Use pull request to contribute.
- 
--To maximize change of patches being taken, follow this instruction when submitting:
-+It was originally hosted on [kernel.org](https://kernel.org/). You can access the old repository
-+[here](https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git).
- 
--1. Create possibly logically separated commits and generate patches:
-+Patches sent through Mailing list are accepted but Github is preferred. Sent then to ML only
-+if you cannot use Github. Please add "mdadm:" to the subject to allow automation to create Github
-+Pull Request and run checks.
- 
--   Use ``git format-patch --cover-letter --signoff -v <nr>`` to create patches:
--   * ``--cover-letter`` can be skipped if it is only one patch;
--   * ``--signoff`` adds sign-off tag;
--   * ``-v <nr>`` indicates review revision number, sender should increment it before resending.
-+**NOTE:** Maintainers may ask you to send RFC to mailing list if the proposed code requires
-+consultation with kernel developers.
- 
--2. Check style of every patch with kernel
--   [checkpatch](https://docs.kernel.org/dev-tools/checkpatch.html) script:
-+Kernel coding style is used. Please familiarize with general kernel
-+[submitting patches](https://www.kernel.org/doc/html/v4.17/process/submitting-patches.html)
-+documentation. Formatting, tags and commit message guidelines applies to **mdadm**.
- 
--   It is important to keep same coding style that is why in **mdadm**
--   [kernel coding style](https://www.kernel.org/doc/html/v4.10/process/coding-style.html)
--   is preferred. ``checkpath --no-tree <patch_file>`` can be used to verify patches.
--   Following checkpatch issues can be ignored:
--   - New typedefs.
--   - comparing with *True/False*.
--   - kernel *MAINTAINERS* file warning.
--   - *extern* keyword in headers.
-+[Checkpatch](https://docs.kernel.org/dev-tools/checkpatch.html) script is run on
-+every patch in pull request so be sure that your commits are not generating
-+issues. There are some excludes, so the best is to follow github checkpatch action result.
- 
--3. Send patches using ``git send-mail --to=linux-raid@vger.kernel.org <cover-letter> <patch1> <patch2> (...)``
-+Pull Request are closed by `Rebase and Merge` option, so it requires to keep every commit
-+meaningful. Kernel style requires that. The review changes must be pushed with **push --force**
-+to the chosen branch, then Pull Request will be automatically updated.
- 
--# Maintainers
-+# Maintainers of mdadm repository on kernel.org
- 
--It is good practice to add **mdadm maintainers** to recipients for patches:
-+If there are differences between github and kernel.org, please contact kernel.org mdadm maintainers:
- 
- - Jes Sorensen <jes@trained-monkey.org>;
- - Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>;
- 
--Adding **MD maintainers** could be reasonable, especially if patches may affect MD driver:
--
--- Song Liu <song@kernel.org>;
--- Yu Kuai <yukuai3@huawei.com>;
--
--# Reviewers
--
--**mdadm** utility is not part of kernel tree, so there is no certificated *Reviewers* list. Everyone
--can comment on mailing list, last decision (and merging) belongs to maintainers.
--
- # Minimal supported kernel version
- 
- We do not support kernel versions below **v3.10**. Please be aware that maintainers may remove
--- 
-2.41.0
-

0069-mdadm-Fix-compilation-for-32-bit-arch.patch

@@ -1,62 +0,0 @@
-From c5879860eac64ddd7bec4ba50c9adbfebcbf1d2e Mon Sep 17 00:00:00 2001
-From: Blazej Kucman <blazej.kucman@intel.com>
-Date: Wed, 15 May 2024 13:26:28 +0200
-Subject: [PATCH 1/1] mdadm: Fix compilation for 32-bit arch
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Casting void pointer to __u64 works for 64-bit arch but fails to compile
-on 32-bit arch like i686.
-
-Fail on i686 platform:
-drive_encryption.c: In function ‘nvme_security_recv_ioctl’:
-drive_encryption.c:236:25: error: cast from pointer to integer of
-different size [-Werror=pointer-to-int-cast]
-  236 |         nvme_cmd.addr = (__u64)response_buffer;
-      |                         ^
-drive_encryption.c: In function ‘nvme_identify_ioctl’:
-drive_encryption.c:271:25: error: cast from pointer to integer of
-different size [-Werror=pointer-to-int-cast]
-  271 |         nvme_cmd.addr = (__u64)response_buffer;
-      |                         ^
-cc1: all warnings being treated as errors
-make: *** [Makefile:211: drive_encryption.o] Error 1
-
-This change adds cast void pointer to uintptr_t first to ensure that
-proper pointer size is used for casting from pointer type. Then is safe to
-cast it to __u64 because it is tracked as u_int, regardless it is 32-bit
-or 64-bit arch.
-
-Reported-by: Xiao Ni <xni@redhat.com>
-Fixes: cc48406887b3 ("Add reading Opal NVMe encryption information")
-Signed-off-by: Blazej Kucman <blazej.kucman@intel.com>
----
- drive_encryption.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/drive_encryption.c b/drive_encryption.c
-index 27da9621..a4ad799f 100644
---- a/drive_encryption.c
-+++ b/drive_encryption.c
-@@ -233,7 +233,7 @@ nvme_security_recv_ioctl(int disk_fd, __u8 sec_protocol, __u16 comm_id, void *re
- 	nvme_cmd.cdw10 = sec_protocol << 24 | comm_id << 8;
- 	nvme_cmd.cdw11 = buf_size;
- 	nvme_cmd.data_len = buf_size;
--	nvme_cmd.addr = (__u64)response_buffer;
-+	nvme_cmd.addr = (__u64)(uintptr_t)response_buffer;
- 
- 	status = ioctl(disk_fd, NVME_IOCTL_ADMIN_CMD, &nvme_cmd);
- 	if (status != 0) {
-@@ -268,7 +268,7 @@ nvme_identify_ioctl(int disk_fd, void *response_buffer, size_t buf_size, const i
- 	nvme_cmd.opcode = NVME_IDENTIFY;
- 	nvme_cmd.cdw10 = NVME_IDENTIFY_CONTROLLER_DATA;
- 	nvme_cmd.data_len = buf_size;
--	nvme_cmd.addr = (__u64)response_buffer;
-+	nvme_cmd.addr = (__u64)(uintptr_t)response_buffer;
- 
- 	status = ioctl(disk_fd, NVME_IOCTL_ADMIN_CMD, &nvme_cmd);
- 	if (status != 0) {
--- 
-2.41.0
-

0070-add-checking-of-return-status-on-fstat-calls.patch

@@ -1,267 +0,0 @@
-From 95673c7d83c8ac7f2aeb91a34ead2971ba30e96e Mon Sep 17 00:00:00 2001
-From: Nigel Croxon <ncroxon@redhat.com>
-Date: Mon, 20 May 2024 09:36:50 -0400
-Subject: [PATCH 070/157] add checking of return status on fstat calls
-
-There are a few places we don't check the return status when
-calling fstat for success. Clean up the calls by adding a
-check before continuing.
-
-Signed-off-by: Nigel Croxon <ncroxon@redhat.com>
----
- Assemble.c    | 41 +++++++++++++++++++++++------------------
- Dump.c        | 11 +++++++++--
- Grow.c        | 12 ++++++++----
- config.c      |  3 ++-
- mdstat.c      |  3 ++-
- super-ddf.c   |  8 ++++++--
- super-intel.c |  8 ++++++--
- 7 files changed, 56 insertions(+), 30 deletions(-)
-
-diff --git a/Assemble.c b/Assemble.c
-index 83dced19..58dc2c5e 100644
---- a/Assemble.c
-+++ b/Assemble.c
-@@ -652,7 +652,9 @@ static int load_devices(struct devs *devices, char *devmap,
- 			/* prepare useful information in info structures */
- 			struct stat stb2;
- 			int err;
--			fstat(mdfd, &stb2);
-+
-+			if (fstat(mdfd, &stb2) != 0)
-+				goto error;
- 
- 			if (c->update == UOPT_UUID && !ident->uuid_set)
- 				random_uuid((__u8 *)ident->uuid);
-@@ -675,13 +677,10 @@ static int load_devices(struct devs *devices, char *devmap,
- 				       devname);
- 				if (dfd >= 0)
- 					close(dfd);
--				close(mdfd);
--				free(devices);
--				free(devmap);
- 				tst->ss->free_super(tst);
- 				free(tst);
- 				*stp = st;
--				return -1;
-+				goto error;
- 			}
- 			tst->ss->getinfo_super(tst, content, devmap + devcnt * content->array.raid_disks);
- 
-@@ -715,12 +714,9 @@ static int load_devices(struct devs *devices, char *devmap,
- 					       map_num(update_options, c->update), tst->ss->name);
- 				tst->ss->free_super(tst);
- 				free(tst);
--				close(mdfd);
- 				close(dfd);
--				free(devices);
--				free(devmap);
- 				*stp = st;
--				return -1;
-+				goto error;
- 			}
- 			if (c->update == UOPT_UUID &&
- 			    !ident->uuid_set) {
-@@ -751,18 +747,23 @@ static int load_devices(struct devs *devices, char *devmap,
- 				       devname);
- 				if (dfd >= 0)
- 					close(dfd);
--				close(mdfd);
--				free(devices);
--				free(devmap);
- 				tst->ss->free_super(tst);
- 				free(tst);
- 				*stp = st;
--				return -1;
-+				goto error;
- 			}
- 			tst->ss->getinfo_super(tst, content, devmap + devcnt * content->array.raid_disks);
- 		}
- 
--		fstat(dfd, &stb);
-+		if (fstat(dfd, &stb) != 0) {
-+			close(dfd);
-+			free(devices);
-+			free(devmap);
-+			tst->ss->free_super(tst);
-+			free(tst);
-+			*stp = st;
-+			return -1;
-+		}
- 		close(dfd);
- 
- 		if (c->verbose > 0)
-@@ -842,12 +843,9 @@ static int load_devices(struct devs *devices, char *devmap,
- 				       inargv ? "the list" :
- 				       "the\n      DEVICE list in mdadm.conf"
- 					);
--				close(mdfd);
--				free(devices);
--				free(devmap);
- 				free(best);
- 				*stp = st;
--				return -1;
-+				goto error;
- 			}
- 			if (best[i] == -1 || (devices[best[i]].i.events
- 					      < devices[devcnt].i.events))
-@@ -863,6 +861,13 @@ static int load_devices(struct devs *devices, char *devmap,
- 	*bestp = best;
- 	*stp = st;
- 	return devcnt;
-+
-+error:
-+	close(mdfd);
-+	free(devices);
-+	free(devmap);
-+	return -1;
-+
- }
- 
- static int force_array(struct mdinfo *content,
-diff --git a/Dump.c b/Dump.c
-index 736bcb60..81b94940 100644
---- a/Dump.c
-+++ b/Dump.c
-@@ -37,6 +37,7 @@ int Dump_metadata(char *dev, char *dir, struct context *c,
- 	unsigned long long size;
- 	DIR *dirp;
- 	struct dirent *de;
-+	int ret = 0;
- 
- 	if (stat(dir, &stb) != 0 ||
- 	    (S_IFMT & stb.st_mode) != S_IFDIR) {
-@@ -112,9 +113,15 @@ int Dump_metadata(char *dev, char *dir, struct context *c,
- 	}
- 	if (c->verbose >= 0)
- 		printf("%s saved as %s.\n", dev, fname);
--	fstat(fd, &dstb);
--	close(fd);
-+
- 	close(fl);
-+	ret = fstat(fd, &dstb);
-+	close(fd);
-+	if (ret) {
-+		unlink(fname);
-+		free(fname);
-+		return 1;
-+	}
- 	if ((dstb.st_mode & S_IFMT) != S_IFBLK) {
- 		/* Not a block device, so cannot create links */
- 		free(fname);
-diff --git a/Grow.c b/Grow.c
-index 1923c27c..963792d0 100644
---- a/Grow.c
-+++ b/Grow.c
-@@ -1223,13 +1223,14 @@ int reshape_open_backup_file(char *backup_file,
- 	 * way this will not notice, but it is better than
- 	 * nothing.
- 	 */
--	fstat(*fdlist, &stb);
-+	if (fstat(*fdlist, &stb) != 0)
-+		goto error;
- 	dev = stb.st_dev;
--	fstat(fd, &stb);
-+	if (fstat(fd, &stb) != 0)
-+		goto error;
- 	if (stb.st_rdev == dev) {
- 		pr_err("backup file must NOT be on the array being reshaped.\n");
--		close(*fdlist);
--		return 0;
-+		goto error;
- 	}
- 
- 	memset(buf, 0, 512);
-@@ -1255,6 +1256,9 @@ int reshape_open_backup_file(char *backup_file,
- 	}
- 
- 	return 1;
-+error:
-+	close(*fdlist);
-+	return 0;
- }
- 
- unsigned long compute_backup_blocks(int nchunk, int ochunk,
-diff --git a/config.c b/config.c
-index b46d71cb..612e700d 100644
---- a/config.c
-+++ b/config.c
-@@ -949,7 +949,8 @@ void conf_file_or_dir(FILE *f)
- 	struct dirent *dp;
- 	struct fname *list = NULL;
- 
--	fstat(fileno(f), &st);
-+	if (fstat(fileno(f), &st) != 0)
-+		return;
- 	if (S_ISREG(st.st_mode))
- 		conf_file(f);
- 	else if (!S_ISDIR(st.st_mode))
-diff --git a/mdstat.c b/mdstat.c
-index 2fd792c5..e233f094 100644
---- a/mdstat.c
-+++ b/mdstat.c
-@@ -348,7 +348,8 @@ void mdstat_wait_fd(int fd, const sigset_t *sigmask)
- 
- 	if (fd >= 0) {
- 		struct stat stb;
--		fstat(fd, &stb);
-+		if (fstat(fd, &stb) != 0)
-+			return;
- 		if ((stb.st_mode & S_IFMT) == S_IFREG)
- 			/* Must be a /proc or /sys fd, so expect
- 			 * POLLPRI
-diff --git a/super-ddf.c b/super-ddf.c
-index 21426c75..311001c1 100644
---- a/super-ddf.c
-+++ b/super-ddf.c
-@@ -1053,7 +1053,10 @@ static int load_ddf_local(int fd, struct ddf_super *super,
- 		     0);
- 	dl->devname = devname ? xstrdup(devname) : NULL;
- 
--	fstat(fd, &stb);
-+	if (fstat(fd, &stb) != 0) {
-+		free(dl);
-+		return 1;
-+	}
- 	dl->major = major(stb.st_rdev);
- 	dl->minor = minor(stb.st_rdev);
- 	dl->next = super->dlist;
-@@ -2786,7 +2789,8 @@ static int add_to_super_ddf(struct supertype *st,
- 	/* This is device numbered dk->number.  We need to create
- 	 * a phys_disk entry and a more detailed disk_data entry.
- 	 */
--	fstat(fd, &stb);
-+	if (fstat(fd, &stb) != 0)
-+		return 1;
- 	n = find_unused_pde(ddf);
- 	if (n == DDF_NOTFOUND) {
- 		pr_err("No free slot in array, cannot add disk\n");
-diff --git a/super-intel.c b/super-intel.c
-index 2b8b6fda..4d257371 100644
---- a/super-intel.c
-+++ b/super-intel.c
-@@ -4239,7 +4239,10 @@ load_imsm_disk(int fd, struct intel_super *super, char *devname, int keep_fd)
- 
- 	dl = xcalloc(1, sizeof(*dl));
- 
--	fstat(fd, &stb);
-+	if (fstat(fd, &stb) != 0) {
-+		free(dl);
-+		return 1;
-+	}
- 	dl->major = major(stb.st_rdev);
- 	dl->minor = minor(stb.st_rdev);
- 	dl->next = super->disks;
-@@ -5981,7 +5984,8 @@ static int add_to_super_imsm(struct supertype *st, mdu_disk_info_t *dk,
- 	if (super->current_vol >= 0)
- 		return add_to_super_imsm_volume(st, dk, fd, devname);
- 
--	fstat(fd, &stb);
-+	if (fstat(fd, &stb) != 0)
-+		return 1;
- 	dd = xcalloc(sizeof(*dd), 1);
- 	dd->major = major(stb.st_rdev);
- 	dd->minor = minor(stb.st_rdev);
--- 
-2.41.0
-

0071-super-intel-fix-typo-in-error-msg.patch

@@ -1,28 +0,0 @@
-From c7790592bb7d050a990a9accb50de8f584879169 Mon Sep 17 00:00:00 2001
-From: Blazej Kucman <blazej.kucman@intel.com>
-Date: Wed, 22 May 2024 11:13:17 +0200
-Subject: [PATCH 071/157] super-intel: fix typo in error msg
-
-Fix typo in encryption policy error msg.
-
-Signed-off-by: Blazej Kucman <blazej.kucman@intel.com>
----
- super-intel.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/super-intel.c b/super-intel.c
-index 4d257371..95856322 100644
---- a/super-intel.c
-+++ b/super-intel.c
-@@ -11328,7 +11328,7 @@ check_policy:
- 			return MDADM_STATUS_SUCCESS;
- 
- 		fd2devname(disk_fd, devname);
--		pr_vrb("Encryption status \"%s\" detected for disk %s, but \"%s\" status was detected eariler.\n",
-+		pr_vrb("Encryption status \"%s\" detected for disk %s, but \"%s\" status was detected earlier.\n",
- 		       encryption_state, devname, expected_policy->value);
- 		pr_vrb("Disks with different encryption status cannot be used.\n");
- 		return MDADM_STATUS_ERROR;
--- 
-2.41.0
-

0072-mdadm-super-intel-remove-dead-code.patch

@@ -1,45 +0,0 @@
-From 49145d4f574b21a6c0612ce691f255732cb91832 Mon Sep 17 00:00:00 2001
-From: Nigel Croxon <ncroxon@redhat.com>
-Date: Wed, 22 May 2024 16:05:25 -0400
-Subject: [PATCH 072/157] mdadm: super-intel remove dead code
-
-Execution cannot reach this statement: "while (devlist) { dv = de...".
-Local variable "err" is assigned only once, to a constant value,
-making it effectively constant throughout its scope.
-Remove dead code.
-
-Signed-off-by: Nigel Croxon <ncroxon@redhat.com>
----
- super-intel.c | 9 ---------
- 1 file changed, 9 deletions(-)
-
-diff --git a/super-intel.c b/super-intel.c
-index 95856322..d1b737c7 100644
---- a/super-intel.c
-+++ b/super-intel.c
-@@ -7046,7 +7046,6 @@ get_devices(const char *hba_path)
- 	struct md_list *dv;
- 	struct dirent *ent;
- 	DIR *dir;
--	int err = 0;
- 
- #if DEBUG_LOOP
- 	devlist = get_loop_devices();
-@@ -7088,14 +7087,6 @@ get_devices(const char *hba_path)
- 		dv->next = devlist;
- 		devlist = dv;
- 	}
--	if (err) {
--		while(devlist) {
--			dv = devlist;
--			devlist = devlist->next;
--			free(dv->devname);
--			free(dv);
--		}
--	}
- 	closedir(dir);
- 	return devlist;
- }
--- 
-2.41.0
-

0073-mdadm-super-intel-fix-bad-shift.patch

@@ -1,55 +0,0 @@
-From 5c30864146412fcdfdcfddcdd94c5c449d9ddbed Mon Sep 17 00:00:00 2001
-From: Nigel Croxon <ncroxon@redhat.com>
-Date: Wed, 22 May 2024 16:53:22 -0400
-Subject: [PATCH 073/157] mdadm: super-intel fix bad shift
-
-In the expression "1 << i", left shifting by more than 31 bits has undefined behavior.
-The shift amount, "i", is as much as 63. The operand has type "int" (32 bits) and will
-be shifted as an "int". The fix is to change to a 64 bit int.
-
-Signed-off-by: Nigel Croxon <ncroxon@redhat.com>
----
- super-intel.c | 11 ++++++-----
- 1 file changed, 6 insertions(+), 5 deletions(-)
-
-diff --git a/super-intel.c b/super-intel.c
-index d1b737c7..0287a618 100644
---- a/super-intel.c
-+++ b/super-intel.c
-@@ -2343,7 +2343,8 @@ void print_encryption_information(int disk_fd, enum sys_dev_type hba_type)
- 	       get_encryption_status_string(information.status));
- }
- 
--static int ahci_enumerate_ports(struct sys_dev *hba, int port_count, int host_base, int verbose)
-+static int ahci_enumerate_ports(struct sys_dev *hba, unsigned long port_count, int host_base,
-+				int verbose)
- {
- 	/* dump an unsorted list of devices attached to AHCI Intel storage
- 	 * controller, as well as non-connected ports
-@@ -2357,7 +2358,7 @@ static int ahci_enumerate_ports(struct sys_dev *hba, int port_count, int host_ba
- 
- 	if (port_count > (int)sizeof(port_mask) * 8) {
- 		if (verbose > 0)
--			pr_err("port_count %d out of range\n", port_count);
-+			pr_err("port_count %ld out of range\n", port_count);
- 		return 2;
- 	}
- 
-@@ -2499,11 +2500,11 @@ static int ahci_enumerate_ports(struct sys_dev *hba, int port_count, int host_ba
- 	if (dir)
- 		closedir(dir);
- 	if (err == 0) {
--		int i;
-+		unsigned long i;
- 
- 		for (i = 0; i < port_count; i++)
--			if (port_mask & (1 << i))
--				printf("          Port%d : - no device attached -\n", i);
-+			if (port_mask & (1L << i))
-+				printf("          Port%ld : - no device attached -\n", i);
- 	}
- 
- 	return err;
--- 
-2.41.0
-

0074-mdadm-deprecate-bitmap-custom-file.patch

@@ -1,438 +0,0 @@
-From 50b100768a115526f5029113af957658ef76b383 Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Fri, 29 Mar 2024 15:21:54 +0100
-Subject: [PATCH 074/157] mdadm: deprecate bitmap custom file
-
-This option has been deprecated in kernel by Christoph in commit
-0ae1c9d38426 ("md: deprecate bitmap file support"). Do the same in
-mdadm.
-
-With this change, user must acknowledge it, it is not
-skippable. The implementation of custom bitmap file looks like it's
-abandoned. It cannot be done by Incremental so it is not respected by
-any udev based system and it seems to not be recorded by metadata.
-User must assemble such volume manually.
-
-Tests for bitmap custom file are removed because now they will not
-pass because interaction with user is mandatory.
-
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- mdadm.8.in               | 34 +++++++++----------
- mdadm.c                  | 70 +++++++++++++++++++++++++++-------------
- tests/05r1-bitmapfile    | 49 ----------------------------
- tests/05r1-grow-external | 33 -------------------
- tests/05r1-n3-bitmapfile | 53 ------------------------------
- tests/05r5-bitmapfile    | 49 ----------------------------
- tests/05r6-bitmapfile    | 49 ----------------------------
- 7 files changed, 62 insertions(+), 275 deletions(-)
- delete mode 100644 tests/05r1-bitmapfile
- delete mode 100644 tests/05r1-grow-external
- delete mode 100644 tests/05r1-n3-bitmapfile
- delete mode 100644 tests/05r5-bitmapfile
- delete mode 100644 tests/05r6-bitmapfile
-
-diff --git a/mdadm.8.in b/mdadm.8.in
-index 9ba66825..aa0c5403 100644
---- a/mdadm.8.in
-+++ b/mdadm.8.in
-@@ -727,29 +727,25 @@ same as
- 
- .TP
- .BR \-b ", " \-\-bitmap=
--Specify a file to store a write-intent bitmap in.  The file should not
--exist unless
--.B \-\-force
--is also given.  The same file should be provided
--when assembling the array.  If the word
--.B "internal"
--is given, then the bitmap is stored with the metadata on the array,
--and so is replicated on all devices.  If the word
--.B "none"
--is given with
--.B \-\-grow
--mode, then any bitmap that is present is removed. If the word
--.B "clustered"
--is given, the array is created for a clustered environment. One bitmap
--is created for each node as defined by the
-+Specify how to store a write-intent bitmap.  Following values are supported:
-+
-+.B internal
-+- the bitmap is stored with the metadata on the array and so is replicated on all devices.
-+
-+.B clustered
-+- the array is created for a clustered environment. One bitmap is created for each node as defined
-+by the
- .B \-\-nodes
- parameter and are stored internally.
- 
--To help catch typing errors, the filename must contain at least one
--slash ('/') if it is a real file (not 'internal' or 'none').
-+.B none
-+- create array with no bitmap or remove any present bitmap (grow mode).
- 
--Note: external bitmaps are only known to work on ext2 and ext3.
--Storing bitmap files on other filesystems may result in serious problems.
-+Setting bitmap for file is deprecated and should not be used. The file should not exist unless
-+.B \-\-force
-+is also given. The same file should be provided when assembling the array. The file name must
-+contain at least one slash ('/'). Bitmap files are only known to work on ext2 and ext3. Storing
-+bitmap files on other filesystems may result in serious problems.
- 
- When creating an array on devices which are 100G or larger,
- .I mdadm
-diff --git a/mdadm.c b/mdadm.c
-index d18619db..0b99fad4 100644
---- a/mdadm.c
-+++ b/mdadm.c
-@@ -29,6 +29,51 @@
- #include "md_p.h"
- #include <ctype.h>
- 
-+/**
-+ * set_bitmap_value() - set bitmap value.
-+ * @s: Shape.
-+ * @c: Context.
-+ * @val: value to set.
-+ *
-+ * Validate and set bitmap. Context is needed for setting nodes for clustered bitmap.
-+ */
-+static mdadm_status_t set_bitmap_value(struct shape *s, struct context *c, char *val)
-+{
-+	if (s->bitmap_file) {
-+		pr_err("--bitmap cannot be set twice. Second value: \"%s\".\n", val);
-+		return MDADM_STATUS_ERROR;
-+	}
-+
-+	if (strcmp(val, "internal") == 0 || strcmp(optarg, STR_COMMON_NONE) == 0) {
-+		s->bitmap_file = val;
-+		return MDADM_STATUS_SUCCESS;
-+	}
-+
-+	if (strcmp(val, "clustered") == 0) {
-+		s->bitmap_file = val;
-+		/* Set the default number of cluster nodes
-+		 * to 4 if not already set by user
-+		 */
-+		if (c->nodes < 1)
-+			c->nodes = 4;
-+		return MDADM_STATUS_SUCCESS;
-+	}
-+
-+	if (strchr(val, '/')) {
-+		pr_info("Custom write-intent bitmap file option is deprecated.\n");
-+		if (ask("Do you want to continue? (y/n)")) {
-+			s->bitmap_file = val;
-+			return MDADM_STATUS_SUCCESS;
-+		}
-+
-+		return MDADM_STATUS_ERROR;
-+	}
-+
-+	pr_err("--bitmap value must contain a '/' or be 'internal', 'clustered' or 'none'\n");
-+	pr_err("Current value is \"%s\"", val);
-+	return MDADM_STATUS_ERROR;
-+}
-+
- static int scan_assemble(struct supertype *ss,
- 			 struct context *c,
- 			 struct mddev_ident *ident);
-@@ -1094,30 +1139,9 @@ int main(int argc, char *argv[])
- 		case O(CREATE,Bitmap): /* here we create the bitmap */
- 		case O(GROW,'b'):
- 		case O(GROW,Bitmap):
--			if (s.bitmap_file) {
--				pr_err("bitmap cannot be set twice. Second value: %s.\n", optarg);
-+			if (set_bitmap_value(&s, &c, optarg))
- 				exit(2);
--			}
--			if (strcmp(optarg, "internal") == 0 ||
--			    strcmp(optarg, STR_COMMON_NONE) == 0 ||
--			    strchr(optarg, '/') != NULL) {
--				s.bitmap_file = optarg;
--				continue;
--			}
--			if (strcmp(optarg, "clustered") == 0) {
--				s.bitmap_file = optarg;
--				/* Set the default number of cluster nodes
--				 * to 4 if not already set by user
--				 */
--				if (c.nodes < 1)
--					c.nodes = 4;
--				continue;
--			}
--			/* probable typo */
--			pr_err("bitmap file must contain a '/', or be 'internal', or be 'clustered', or 'none'\n"
--				"       not '%s'\n", optarg);
--			exit(2);
--
-+			continue;
- 		case O(GROW,BitmapChunk):
- 		case O(BUILD,BitmapChunk):
- 		case O(CREATE,BitmapChunk): /* bitmap chunksize */
-diff --git a/tests/05r1-bitmapfile b/tests/05r1-bitmapfile
-deleted file mode 100644
-index f384f0ea..00000000
---- a/tests/05r1-bitmapfile
-+++ /dev/null
-@@ -1,49 +0,0 @@
--
--#
--# create a raid1 with a bitmap file
--#
--bmf=$targetdir/bitmap
--rm -f $bmf
--mdadm --create --run $md0 --level=1 -n2 --delay=1  --bitmap $bmf $dev1 $dev2
--check wait
--testdev $md0 1 $mdsize1a 64
--mdadm -S $md0
--
--mdadm --assemble $md0 --bitmap=$bmf $dev1 $dev2
--testdev $md0 1 $mdsize1a 64
--dirty1=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--sleep 4
--dirty2=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--
--if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ]
--then  echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2"
--  exit 1
--fi
--mdadm $md0 -f $dev1
--testdev $md0 1 $mdsize1a 64
--sleep 4
--dirty3=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--if [ $dirty3 -lt 400 ]
--then
--   echo >&2 "ERROR dirty count $dirty3 is too small"
--   exit 2
--fi
--
--mdadm -S $md0
--
--mdadm --assemble -R $md0 --bitmap=$bmf $dev2
--dirty4=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--mdadm --zero $dev1 # force --add, not --re-add
--mdadm $md0 --add $dev1
--#it is too fast# check recovery
--
--check wait
--sleep 4
--dirty5=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--
--if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ]
--then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5"
--  exit 1
--fi
--
--mdadm -S $md0
-diff --git a/tests/05r1-grow-external b/tests/05r1-grow-external
-deleted file mode 100644
-index 69da3e90..00000000
---- a/tests/05r1-grow-external
-+++ /dev/null
-@@ -1,33 +0,0 @@
--
--#
--# create a raid1 array, add an external bitmap
--#
--mdadm --create --run $md0 -l 1 -n 2 $dev1 $dev2
--check wait
--testdev $md0 1 $mdsize1a 64
--
--bmf=$targetdir/bm
--rm -f $bmf
--#mdadm -E $dev1
--mdadm --grow $md0 --bitmap=$bmf --delay=1 || { mdadm -X $bmf ; exit 1; }
--dirty1=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--sleep 4
--dirty2=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--
--testdev $md0 1 $mdsize1a 64
--dirty3=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--sleep 4
--dirty4=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--
--#echo $dirty1 $dirty2 $dirty3 $dirty4
--if [ $dirty2 -ne 0 -o $dirty4 -ne 0 -o $dirty3 -lt 400 ]
--then
--   echo bad dirty counts
--   exit 1
--fi
--
--# now to remove the bitmap
--check bitmap
--mdadm --grow $md0 --bitmap=none
--check nobitmap
--mdadm -S $md0
-diff --git a/tests/05r1-n3-bitmapfile b/tests/05r1-n3-bitmapfile
-deleted file mode 100644
-index f1c3f1ee..00000000
---- a/tests/05r1-n3-bitmapfile
-+++ /dev/null
-@@ -1,53 +0,0 @@
--
--#
--# create a raid1 with 3 devices and a bitmap file
--# make  sure resync does right thing.
--#
--#
--bmf=$targetdir/bitmap
--rm -f $bmf
--mdadm --create -e0.90 --run $md0 --level=1 -n3 --delay=1  --bitmap $bmf $dev1 $dev2 $dev3
--check wait
--testdev $md0 1 $mdsize0 64
--mdadm -S $md0
--
--mdadm --assemble $md0 --bitmap=$bmf $dev1 $dev2 $dev3
--testdev $md0 1 $mdsize0 64
--dirty1=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--sleep 4
--dirty2=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--
--if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ]
--then  echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2"
--  exit 1
--fi
--mdadm $md0 -f $dev2
--testdev $md0 1 $mdsize0 64
--sleep 4
--dirty3=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--if [ $dirty3 -lt 400 ]
--then
--   echo >&2 "ERROR dirty count $dirty3 is too small"
--   exit 2
--fi
--
--mdadm -S $md0
--
--mdadm --assemble -R $md0 --bitmap=$bmf $dev1 $dev3
--check nosync
--mdadm --zero-superblock $dev2
--mdadm $md0 --add $dev2
--check recovery
--
--dirty4=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--check wait
--sleep 4
--dirty5=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--
--if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ]
--then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5"
--  exit 1
--fi
--
--mdadm -S $md0
--exit 0
-diff --git a/tests/05r5-bitmapfile b/tests/05r5-bitmapfile
-deleted file mode 100644
-index 6d173d88..00000000
---- a/tests/05r5-bitmapfile
-+++ /dev/null
-@@ -1,49 +0,0 @@
--
--#
--# create a raid1 with a bitmap file
--#
--bmf=$targetdir/bitmap
--rm -f $bmf
--mdadm --create --run $md0 --level=5 -n3 --delay=1  --bitmap $bmf $dev1 $dev2 $dev3
--check wait
--testdev $md0 2 $mdsize1 512
--mdadm -S $md0
--
--mdadm --assemble $md0 --bitmap=$bmf $dev1 $dev2 $dev3
--testdev $md0 2 $mdsize1 512
--dirty1=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--sleep 4
--dirty2=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--
--if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ]
--then  echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2"
--  exit 1
--fi
--mdadm $md0 -f $dev1
--testdev $md0 2 $mdsize1 512
--sleep 4
--dirty3=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--if [ $dirty3 -lt 400 ]
--then
--   echo >&2 "ERROR dirty count $dirty3 is too small"
--   exit 2
--fi
--
--mdadm -S $md0
--
--mdadm --assemble -R $md0 --bitmap=$bmf $dev2 $dev3
--mdadm --zero $dev1 # force add, not re-add
--mdadm $md0 --add $dev1
--check recovery
--
--dirty4=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--check wait
--sleep 4
--dirty5=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--
--if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ]
--then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5"
--  exit 1
--fi
--
--mdadm -S $md0
-diff --git a/tests/05r6-bitmapfile b/tests/05r6-bitmapfile
-deleted file mode 100644
-index d11896db..00000000
---- a/tests/05r6-bitmapfile
-+++ /dev/null
-@@ -1,49 +0,0 @@
--
--#
--# create a raid1 with a bitmap file
--#
--bmf=$targetdir/bitmap
--rm -f $bmf
--mdadm --create --run $md0 --level=6 -n4 --delay=1  --bitmap $bmf $dev1 $dev2 $dev3 $dev4
--check wait
--testdev $md0 2 $mdsize1 512
--mdadm -S $md0
--
--mdadm --assemble $md0 --bitmap=$bmf $dev1 $dev2 $dev3 $dev4
--testdev $md0 2 $mdsize1 512
--dirty1=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--sleep 4
--dirty2=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--
--if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ]
--then  echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2"
--  exit 1
--fi
--mdadm $md0 -f $dev3
--testdev $md0 2 $mdsize1 512
--sleep 4
--dirty3=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--if [ $dirty3 -lt 400 ]
--then
--   echo >&2 "ERROR dirty count $dirty3 is too small"
--   exit 2
--fi
--
--mdadm -S $md0
--
--mdadm --assemble -R $md0 --bitmap=$bmf $dev1 $dev2 $dev4
--mdadm --zero $dev3 # force --add, not --re-add
--mdadm $md0 --add $dev3
--check recovery
--
--dirty4=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--check wait
--sleep 4
--dirty5=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--
--if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ]
--then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5"
--  exit 1
--fi
--
--mdadm -S $md0
--- 
-2.41.0
-

0075-Makefile-fix-make-s-detection.patch

@@ -1,31 +0,0 @@
-From 906922ee321d64e2ce8458147e67d4892696fb58 Mon Sep 17 00:00:00 2001
-From: Valery Ushakov <valery.ushakov@bell-sw.com>
-Date: Wed, 22 May 2024 17:07:38 +0300
-Subject: [PATCH 075/157] Makefile: fix make -s detection
-
-Only check the first word of MAKEFLAGS for 's', that's where all the
-single letter options are collected.
-
-MAKEFLAGS contains _all_ make flags, so if any command line argument
-contains a letter 's', the silent test will be false positive.  Think
-e.g. make 'DESTDIR=.../aports/main/mdadm/pkg/mdadm' install
----
- Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/Makefile b/Makefile
-index adac7905..446710bd 100644
---- a/Makefile
-+++ b/Makefile
-@@ -157,7 +157,7 @@ ifndef UDEVDIR
-  UDEVDIR = /lib/udev
- endif
- 
--ifeq (,$(findstring s,$(MAKEFLAGS)))
-+ifeq (,$(findstring s,$(firstword -$(MAKEFLAGS))))
- 	ECHO=echo
- else
- 	ECHO=:
--- 
-2.41.0
-

0076-Change-some-error-messages-to-info-level.patch

@@ -1,81 +0,0 @@
-From 13a0e92a3ed70c52246a0f0572dee61203994327 Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Wed, 22 May 2024 16:50:38 +0800
-Subject: [PATCH 076/157] Change some error messages to info level
-
-These logs are not error logs. Change them to info level.
-
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Assemble.c | 16 ++++++----------
- Manage.c   |  2 +-
- util.c     |  4 ++--
- 3 files changed, 9 insertions(+), 13 deletions(-)
-
-diff --git a/Assemble.c b/Assemble.c
-index 58dc2c5e..0e6da593 100644
---- a/Assemble.c
-+++ b/Assemble.c
-@@ -1214,23 +1214,19 @@ static int start_array(int mdfd,
- 		if (rv == 0) {
- 			sysfs_rules_apply(mddev, content);
- 			if (c->verbose >= 0) {
--				pr_err("%s has been started with %d drive%s",
-+				pr_info("%s has been started with %d drive%s",
- 				       mddev, okcnt, okcnt==1?"":"s");
- 				if (okcnt < (unsigned)content->array.raid_disks)
--					fprintf(stderr, " (out of %d)",
--						content->array.raid_disks);
-+					printf(" (out of %d)", content->array.raid_disks);
- 				if (rebuilding_cnt)
--					fprintf(stderr, "%s %d rebuilding",
--						sparecnt?",":" and",
-+					printf("%s %d rebuilding", sparecnt?",":" and",
- 						rebuilding_cnt);
- 				if (sparecnt)
--					fprintf(stderr, " and %d spare%s",
--						sparecnt,
-+					printf(" and %d spare%s", sparecnt,
- 						sparecnt == 1 ? "" : "s");
- 				if (content->journal_clean)
--					fprintf(stderr, " and %d journal",
--						journalcnt);
--				fprintf(stderr, ".\n");
-+					printf(" and %d journal", journalcnt);
-+				printf(".\n");
- 			}
- 			if (content->reshape_active &&
- 			    is_level456(content->array.level)) {
-diff --git a/Manage.c b/Manage.c
-index 96e5ee54..5db72b77 100644
---- a/Manage.c
-+++ b/Manage.c
-@@ -463,7 +463,7 @@ done:
- 	}
- 
- 	if (verbose >= 0)
--		pr_err("stopped %s\n", devname);
-+		pr_info("stopped %s\n", devname);
- 	map_lock(&map);
- 	map_remove(&map, devnm);
- 	map_unlock(&map);
-diff --git a/util.c b/util.c
-index bf79742f..48c97545 100644
---- a/util.c
-+++ b/util.c
-@@ -633,9 +633,9 @@ int check_ext2(int fd, char *name)
- 	bsize = sb[24]|(sb[25]|(sb[26]|sb[27]<<8)<<8)<<8;
- 	size = sb[4]|(sb[5]|(sb[6]|sb[7]<<8)<<8)<<8;
- 	size <<= bsize;
--	pr_err("%s appears to contain an ext2fs file system\n",
-+	pr_info("%s appears to contain an ext2fs file system\n",
- 		name);
--	cont_err("size=%lluK  mtime=%s", size, ctime(&mtime));
-+	pr_info("size=%lluK  mtime=%s", size, ctime(&mtime));
- 	return 1;
- }
- 
--- 
-2.41.0
-

0077-mdadm-Start-update_opt-from-0.patch

@@ -1,40 +0,0 @@
-From 296398299391b10650bdd79d986b115588e60590 Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Wed, 22 May 2024 16:50:39 +0800
-Subject: [PATCH 077/157] mdadm: Start update_opt from 0
-
-Before f2e8393bd722 ('Manage&Incremental: code refactor, string to enum'), it uses
-NULL to represent it doesn't need to update. So init UOPT_UNDEFINED to 0. This
-problem is found by test case 05r6tor0.
-
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- mdadm.h | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/mdadm.h b/mdadm.h
-index b71d7b32..40818941 100644
---- a/mdadm.h
-+++ b/mdadm.h
-@@ -535,7 +535,8 @@ enum special_options {
- };
- 
- enum update_opt {
--	UOPT_NAME = 1,
-+	UOPT_UNDEFINED = 0,
-+	UOPT_NAME,
- 	UOPT_PPL,
- 	UOPT_NO_PPL,
- 	UOPT_BITMAP,
-@@ -575,7 +576,6 @@ enum update_opt {
- 	UOPT_SPEC_FAILFAST,
- 	UOPT_SPEC_NOFAILFAST,
- 	UOPT_SPEC_REVERT_RESHAPE_NOBACKUP,
--	UOPT_UNDEFINED
- };
- extern void fprint_update_options(FILE *outf, enum update_opt update_mode);
- 
--- 
-2.41.0
-

0078-Don-t-control-reshape-speed-in-daemon.patch

@@ -1,49 +0,0 @@
-From f79f7189aa25b9da51736f2c578a51c2c4fe7706 Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Wed, 22 May 2024 16:50:40 +0800
-Subject: [PATCH 078/157] Don't control reshape speed in daemon
-
-It tries to set the max sync speed in reshape. This should be done by
-administrators by control interfaces /proc/sys/dev/raid/speed_limit_max/min.
-
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- Grow.c | 7 -------
- 1 file changed, 7 deletions(-)
-
-diff --git a/Grow.c b/Grow.c
-index 963792d0..b135930d 100644
---- a/Grow.c
-+++ b/Grow.c
-@@ -4488,7 +4488,6 @@ int child_monitor(int afd, struct mdinfo *sra, struct reshape *reshape,
- 	 */
- 	char *buf;
- 	int degraded = -1;
--	unsigned long long speed;
- 	unsigned long long suspend_point, array_size;
- 	unsigned long long backup_point, wait_point;
- 	unsigned long long reshape_completed;
-@@ -4544,10 +4543,6 @@ int child_monitor(int afd, struct mdinfo *sra, struct reshape *reshape,
- 	if (posix_memalign((void**)&buf, 4096, disks * chunk))
- 		/* Don't start the 'reshape' */
- 		return 0;
--	if (reshape->before.data_disks == reshape->after.data_disks) {
--		sysfs_get_ll(sra, NULL, "sync_speed_min", &speed);
--		sysfs_set_num(sra, NULL, "sync_speed_min", 200000);
--	}
- 
- 	if (increasing) {
- 		array_size = sra->component_size * reshape->after.data_disks;
-@@ -4680,8 +4675,6 @@ int child_monitor(int afd, struct mdinfo *sra, struct reshape *reshape,
- 	sysfs_set_num(sra, NULL, "suspend_lo", 0);
- 	sysfs_set_num(sra, NULL, "sync_min", 0);
- 
--	if (reshape->before.data_disks == reshape->after.data_disks)
--		sysfs_set_num(sra, NULL, "sync_speed_min", speed);
- 	free(buf);
- 	return done;
- }
--- 
-2.41.0
-

0079-mdadm-tests-test-enhance.patch

@@ -1,119 +0,0 @@
-From 6e8af9475cf0ac22f7ac167040dbf92fbfdd97ab Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Wed, 22 May 2024 16:50:41 +0800
-Subject: [PATCH 079/157] mdadm/tests: test enhance
-
-There are two changes.
-First, if md module is not loaded, it gives error when reading
-speed_limit_max. So read the value after loading md module which
-is done in do_setup
-
-Second, sometimes the test reports error sync action doesn't
-happen. But dmesg shows sync action is done. So limit the sync
-speed before test. It doesn't affect the test run time. Because
-check wait sets the max speed before waiting sync action. And
-recording speed_limit_max/min in do_setup.
-
-Fixes: 4c12714d1ca0 ('test: run tests on system level mdadm')
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- test          | 10 +++++-----
- tests/func.sh | 26 +++++++++++++++++++++++---
- 2 files changed, 28 insertions(+), 8 deletions(-)
-
-diff --git a/test b/test
-index 338c2db4..ff403293 100755
---- a/test
-+++ b/test
-@@ -6,7 +6,10 @@ targetdir="/var/tmp"
- logdir="$targetdir"
- config=/tmp/mdadm.conf
- testdir=$PWD/tests
--system_speed_limit=`cat /proc/sys/dev/raid/speed_limit_max`
-+system_speed_limit_max=0
-+system_speed_limit_min=0
-+test_speed_limit_min=100
-+test_speed_limit_max=500
- devlist=
- 
- savelogs=0
-@@ -39,10 +42,6 @@ ctrl_c() {
- 	ctrl_c_error=1
- }
- 
--restore_system_speed_limit() {
--	echo $system_speed_limit > /proc/sys/dev/raid/speed_limit_max
--}
--
- mdadm() {
- 	rm -f $targetdir/stderr
- 	case $* in
-@@ -103,6 +102,7 @@ do_test() {
- 		do_clean
- 		# source script in a subshell, so it has access to our
- 		# namespace, but cannot change it.
-+		control_system_speed_limit
- 		echo -ne "$_script... "
- 		if ( set -ex ; . $_script ) &> $targetdir/log
- 		then
-diff --git a/tests/func.sh b/tests/func.sh
-index b474442b..221cff15 100644
---- a/tests/func.sh
-+++ b/tests/func.sh
-@@ -136,6 +136,23 @@ check_env() {
- 	fi
- }
- 
-+record_system_speed_limit() {
-+	system_speed_limit_max=`cat /proc/sys/dev/raid/speed_limit_max`
-+	system_speed_limit_min=`cat /proc/sys/dev/raid/speed_limit_min`
-+}
-+
-+# To avoid sync action finishes before checking it, it needs to limit
-+# the sync speed
-+control_system_speed_limit() {
-+	echo $test_speed_limit_min > /proc/sys/dev/raid/speed_limit_min
-+	echo $test_speed_limit_max > /proc/sys/dev/raid/speed_limit_max
-+}
-+
-+restore_system_speed_limit() {
-+	echo $system_speed_limit_min > /proc/sys/dev/raid/speed_limit_max
-+	echo $system_speed_limit_max > /proc/sys/dev/raid/speed_limit_max
-+}
-+
- do_setup() {
- 	trap cleanup 0 1 3 15
- 	trap ctrl_c 2
-@@ -214,6 +231,7 @@ do_setup() {
- 	ulimit -c unlimited
- 	[ -f /proc/mdstat ] || modprobe md_mod
- 	echo 0 > /sys/module/md_mod/parameters/start_ro
-+	record_system_speed_limit
- }
- 
- # check various things
-@@ -265,15 +283,17 @@ check() {
- 		fi
- 	;;
- 	wait )
--		p=`cat /proc/sys/dev/raid/speed_limit_max`
--		echo 2000000 > /proc/sys/dev/raid/speed_limit_max
-+		min=`cat /proc/sys/dev/raid/speed_limit_min`
-+		max=`cat /proc/sys/dev/raid/speed_limit_max`
-+		echo 200000 > /proc/sys/dev/raid/speed_limit_max
- 		sleep 0.1
- 		while grep -Eq '(resync|recovery|reshape|check|repair) *=' /proc/mdstat ||
- 			grep -v idle > /dev/null /sys/block/md*/md/sync_action
- 		do
- 			sleep 0.5
- 		done
--		echo $p > /proc/sys/dev/raid/speed_limit_max
-+		echo $min > /proc/sys/dev/raid/speed_limit_min
-+		echo $max > /proc/sys/dev/raid/speed_limit_max
- 	;;
- 	state )
- 		grep -sq "blocks.*\[$2\]\$" /proc/mdstat ||
--- 
-2.41.0
-

0080-mdadm-tests-test-don-t-fail-when-systemd-reports-err.patch

@@ -1,31 +0,0 @@
-From 73ba062ef93d0a57360a2d5200bc7a8f8781e7b6 Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Wed, 22 May 2024 16:50:42 +0800
-Subject: [PATCH 080/157] mdadm/tests: test don't fail when systemd reports
- error
-
-Sometimes systemd reports error in dmesg and test fails. Add
-a condition to avoid this failure.
-
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- test | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/test b/test
-index ff403293..3da53f87 100755
---- a/test
-+++ b/test
-@@ -109,7 +109,7 @@ do_test() {
- 			if [ -f "${_script}.inject_error" ]; then
- 				echo "dmesg checking is skipped because test inject error"
- 			else
--				dmesg | grep -iq "error\|call trace\|segfault" &&
-+				dmesg | grep -iq "error\|call trace\|segfault" | grep -v "systemd" &&
- 					die "dmesg prints errors when testing $_basename!"
- 			fi
- 			echo "succeeded"
--- 
-2.41.0
-

0081-mdadm-tests-names_template-enhance.patch

@@ -1,109 +0,0 @@
-From 41706a91568472d10153bf4ada3c3f0d93ef327a Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Wed, 22 May 2024 16:50:43 +0800
-Subject: [PATCH 081/157] mdadm/tests: names_template enhance
-
-For super1, if the length of hostname is >= 32, it doesn't add hostname
-in metadata name. Fix this problem by checking the length of hostname.
-Because other cases may use need to check this, so do the check in
-do_setup.
-
-And this patch adds a check if link /dev/md/name exists.
-
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- test                           |  5 +++++
- tests/func.sh                  | 13 +++++++++++++
- tests/templates/names_template | 14 ++++++++++++--
- 3 files changed, 30 insertions(+), 2 deletions(-)
-
-diff --git a/test b/test
-index 3da53f87..814ce199 100755
---- a/test
-+++ b/test
-@@ -11,6 +11,11 @@ system_speed_limit_min=0
- test_speed_limit_min=100
- test_speed_limit_max=500
- devlist=
-+# If super1 metadata name doesn't have the same hostname with machine,
-+# it's treated as foreign.
-+# For example, /dev/md0 is created, stops it, then assemble it, the
-+# device node will be /dev/md127 (127 is choosed by mdadm autumatically)
-+is_foreign="no"
- 
- savelogs=0
- exitonerror=1
-diff --git a/tests/func.sh b/tests/func.sh
-index 221cff15..cfe83e55 100644
---- a/tests/func.sh
-+++ b/tests/func.sh
-@@ -153,6 +153,18 @@ restore_system_speed_limit() {
- 	echo $system_speed_limit_max > /proc/sys/dev/raid/speed_limit_max
- }
- 
-+is_raid_foreign() {
-+
-+	# If the length of hostname is >= 32, super1 doesn't use
-+	# hostname in metadata
-+	hostname=$(hostname)
-+	if [ `expr length $(hostname)` -lt 32 ]; then
-+		is_foreign="no"
-+	else
-+		is_foreign="yes"
-+	fi
-+}
-+
- do_setup() {
- 	trap cleanup 0 1 3 15
- 	trap ctrl_c 2
-@@ -232,6 +244,7 @@ do_setup() {
- 	[ -f /proc/mdstat ] || modprobe md_mod
- 	echo 0 > /sys/module/md_mod/parameters/start_ro
- 	record_system_speed_limit
-+	is_raid_foreign
- }
- 
- # check various things
-diff --git a/tests/templates/names_template b/tests/templates/names_template
-index 1b6cd14b..88ad5b8c 100644
---- a/tests/templates/names_template
-+++ b/tests/templates/names_template
-@@ -30,6 +30,7 @@ function names_verify() {
- 	local DEVNODE_NAME="$1"
- 	local WANTED_LINK="$2"
- 	local WANTED_NAME="$3"
-+	local EXPECTED=""
- 
- 	local RES="$(mdadm -D --export $DEVNODE_NAME | grep MD_DEVNAME)"
- 	if [[ "$?" != "0" ]]; then
-@@ -38,7 +39,12 @@ function names_verify() {
- 	fi
- 
- 	if [[ "$WANTED_LINK" != "empty" ]]; then
--		local EXPECTED="MD_DEVNAME=$WANTED_LINK"
-+		EXPECTED="MD_DEVNAME=$WANTED_LINK"
-+
-+		if [ ! -b /dev/md/$WANTED_LINK ]; then
-+			echo "/dev/md/$WANTED_LINK doesn't exit"
-+			exit 1
-+		fi
- 	fi
- 
- 	if [[ "$RES" != "$EXPECTED" ]]; then
-@@ -52,7 +58,11 @@ function names_verify() {
- 		exit 1
- 	fi
- 
--	local EXPECTED="MD_NAME=$(hostname):$WANTED_NAME"
-+	if [ $is_foreign == "no" ]; then
-+		EXPECTED="MD_NAME=$(hostname):$WANTED_NAME"
-+	else
-+		EXPECTED="MD_NAME=$WANTED_NAME"
-+	fi
- 	if [[ "$RES" != "$EXPECTED" ]]; then
- 		echo "$RES doesn't match $EXPECTED."
- 		exit 1
--- 
-2.41.0
-

0082-mdadm-tests-03assem-incr-enhance.patch

@@ -1,67 +0,0 @@
-From 23f45965a0abe3506885c8e8005ee79473a66422 Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Wed, 22 May 2024 16:50:44 +0800
-Subject: [PATCH 082/157] mdadm/tests: 03assem-incr enhance
-
-It fails when hostname lenght > 32. Because the super1 metadata name
-doesn't include hostname when hostname length > 32. Then mdadm thinks
-the array is a foreign array if no device link is specified when
-assembling the array. It chooses a minor number from 127.
-
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- test               |  3 +++
- tests/03assem-incr | 20 +++++++++++++-------
- 2 files changed, 16 insertions(+), 7 deletions(-)
-
-diff --git a/test b/test
-index 814ce199..1fce6be2 100755
---- a/test
-+++ b/test
-@@ -33,6 +33,9 @@ LVM_VOLGROUP=mdtest
- md0=/dev/md0
- md1=/dev/md1
- md2=/dev/md2
-+# if user doesn't specify minor number, mdadm chooses minor number
-+# automatically from 127.
-+md127=/dev/md127
- mdp0=/dev/md_d0
- mdp1=/dev/md_d1
- 
-diff --git a/tests/03assem-incr b/tests/03assem-incr
-index 38880a7f..21215a34 100644
---- a/tests/03assem-incr
-+++ b/tests/03assem-incr
-@@ -9,15 +9,21 @@ set -x -e
- levels=(raid0 raid1 raid5)
- 
- if [ "$LINEAR" == "yes" ]; then
--  levels+=( linear )
-+	levels+=( linear )
- fi
- 
- for l in ${levels[@]}
- do
--  mdadm -CR $md0 -l $l -n5 $dev0 $dev1 $dev2 $dev3 $dev4 --assume-clean
--  mdadm -S md0
--  mdadm -I $dev1
--  mdadm -I $dev3
--  mdadm -A /dev/md0  $dev0 $dev1 $dev2 $dev3 $dev4
--  mdadm -S /dev/md0
-+	mdadm -CR $md0 -l $l -n5 $dev0 $dev1 $dev2 $dev3 $dev4 --assume-clean
-+	mdadm -S $md0
-+	mdadm -I $dev1
-+	mdadm -I $dev3
-+	mdadm -A $md0  $dev0 $dev1 $dev2 $dev3 $dev4
-+	# If one array is foreign (metadata name doesn't have the machine's
-+	# hostname), mdadm chooses a minor number automatically from 127
-+	if [ $is_foreign == "no" ]; then
-+		mdadm -S $md0
-+	else
-+		mdadm -S $md127
-+	fi
- done
--- 
-2.41.0
-

0083-mdadm-tests-03r0assem-enhance.patch

@@ -1,38 +0,0 @@
-From f136d9a8b7d8fdfd7539b96707bc9a03528754aa Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Wed, 22 May 2024 16:50:45 +0800
-Subject: [PATCH 083/157] mdadm/tests 03r0assem enhance
-
-dcc22ae74a864 ('super1: remove support for name= in config') already
-removes name= support. So remove related test codes in 03r0assem.
-
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- tests/03r0assem | 10 ----------
- 1 file changed, 10 deletions(-)
-
-diff --git a/tests/03r0assem b/tests/03r0assem
-index f7c29e8c..4bf8b9e8 100644
---- a/tests/03r0assem
-+++ b/tests/03r0assem
-@@ -33,16 +33,6 @@ mdadm -As -c $conf $md2
- $tst
- mdadm -S $md2
- 
--{
--  echo DEVICE $devlist
--  echo array $md2 name=2
--} > $conf
--
--mdadm -As -c $conf $md2
--$tst
--mdadm -S $md2
--
--
- {
-   echo DEVICE $devlist
-   echo array $md2 devices=$dev0,$dev1,$dev2
--- 
-2.41.0
-

0084-mdadm-tests-remove-03r5assem-failed.patch

@@ -1,35 +0,0 @@
-From 5c1133ba8d026d65362953f25178fbf974b78ce9 Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Wed, 22 May 2024 16:50:46 +0800
-Subject: [PATCH 084/157] mdadm/tests: remove 03r5assem-failed
-
-03r5assem can run successfully with kernel 6.9.0-rc4
-
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- tests/03r5assem-failed | 12 ------------
- 1 file changed, 12 deletions(-)
- delete mode 100644 tests/03r5assem-failed
-
-diff --git a/tests/03r5assem-failed b/tests/03r5assem-failed
-deleted file mode 100644
-index d38241df..00000000
---- a/tests/03r5assem-failed
-+++ /dev/null
-@@ -1,12 +0,0 @@
--
--# Create an array, fail one device while array is active, stop array,
--# then re-assemble listing the failed device first.
--
--mdadm -CR $md1 -l5 -n4 $dev0 $dev1 $dev2 $dev3
--check wait
--
--echo 2000 > /sys/block/md1/md/safe_mode_delay
--mkfs $md1
--mdadm $md1 -f $dev0
--mdadm -S $md1
--mdadm -A $md1 $dev0 $dev1 $dev2 $dev3 || exit 1
--- 
-2.41.0
-

0085-mdadm-tests-03r5assemV1.patch

@@ -1,52 +0,0 @@
-From 6077e9248acda8c70df58fabc8de23195c19a0cf Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Wed, 22 May 2024 16:50:47 +0800
-Subject: [PATCH 085/157] mdadm/tests: 03r5assemV1
-
-dcc22ae74a864 ('super1: remove support for name= in config') already
-removes name= support. So remove related test codes in 03r5assemV1.
-
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- tests/03r5assemV1 | 17 -----------------
- 1 file changed, 17 deletions(-)
-
-diff --git a/tests/03r5assemV1 b/tests/03r5assemV1
-index bca0c583..6026011e 100644
---- a/tests/03r5assemV1
-+++ b/tests/03r5assemV1
-@@ -31,14 +31,6 @@ conf=$targetdir/mdadm.conf
- mdadm -As -c $conf $md1
- eval $tst
- 
--{
--  echo DEVICE $devlist
--  echo array $md1 name=one
--} > $conf
--
--mdadm -As -c $conf
--eval $tst
--
- {
-   echo DEVICE $devlist
-   echo array $md1 devices=$dev0,$dev1,$dev2,$dev3,$dev4
-@@ -88,15 +80,6 @@ mdadm -As -c $conf $md1
- check state U_U
- eval $tst
- 
--{
--  echo DEVICE $devlist
--  echo array $md1 name=one
--} > $conf
--
--mdadm -As -c $conf
--check state U_U
--eval $tst
--
- {
-   echo DEVICE $devlist
-   echo array $md1 devices=$dev0,$dev1,$dev2
--- 
-2.41.0
-

0086-mdadm-tests-remove-04r5swap.broken.patch

@@ -1,30 +0,0 @@
-From b9b8eaef49e075ce68846abb7cf0ca47c1ba9f2f Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Wed, 22 May 2024 16:50:48 +0800
-Subject: [PATCH 086/157] mdadm/tests: remove 04r5swap.broken
-
-04r5swap can run successfully with kernel 6.9.0-rc4
-
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- tests/04r5swap.broken | 7 -------
- 1 file changed, 7 deletions(-)
- delete mode 100644 tests/04r5swap.broken
-
-diff --git a/tests/04r5swap.broken b/tests/04r5swap.broken
-deleted file mode 100644
-index e38987db..00000000
---- a/tests/04r5swap.broken
-+++ /dev/null
-@@ -1,7 +0,0 @@
--always fails
--
--Fails with errors:
--
--  mdadm: /dev/loop0 has no superblock - assembly aborted
--
--   ERROR: no recovery happening
--- 
-2.41.0
-

0087-tests-04update-metadata-skip-linear.patch

@@ -1,116 +0,0 @@
-From 9808f110c5aea5454e9f56b2b660612a57adb347 Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Wed, 22 May 2024 16:50:49 +0800
-Subject: [PATCH 087/157] tests/04update-metadata skip linear
-
-Add one check that if kernel doesn't support linear/multipath, it can
-skip linear/multipath testing.
-
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- test                    |  3 +++
- tests/04update-metadata | 35 ++++++++++++++++++++---------------
- tests/func.sh           |  2 ++
- 3 files changed, 25 insertions(+), 15 deletions(-)
-
-diff --git a/test b/test
-index 1fce6be2..f09994e7 100755
---- a/test
-+++ b/test
-@@ -17,6 +17,9 @@ devlist=
- # device node will be /dev/md127 (127 is choosed by mdadm autumatically)
- is_foreign="no"
- 
-+skipping_linear="no"
-+skipping_multipath="no"
-+
- savelogs=0
- exitonerror=1
- ctrl_c_error=0
-diff --git a/tests/04update-metadata b/tests/04update-metadata
-index 2b72a303..c748770c 100644
---- a/tests/04update-metadata
-+++ b/tests/04update-metadata
-@@ -8,24 +8,29 @@ set -xe
- 
- dlist="$dev0 $dev1 $dev2 $dev3"
- 
--for ls in linear/4 raid1/1 raid5/3 raid6/2
-+if [ $skipping_linear == "yes" ]; then
-+	level_list="raid1/1 raid5/3 raid6/2"
-+else
-+	level_list="linear/4 raid1/1 raid5/3 raid6/2"
-+fi
-+for ls in $level_list
- do
--  s=${ls#*/} l=${ls%/*}
--  if [[ $l == 'raid1' ]]; then
--	mdadm -CR --assume-clean -e 0.90 $md0 --level $l -n 4 $dlist
--  else
--	mdadm -CR --assume-clean -e 0.90 $md0 --level $l -n 4 -c 64 $dlist
--  fi
--  testdev $md0 $s 19904 64
--  mdadm -S $md0
--  mdadm -A $md0 --update=metadata $dlist
--  testdev $md0 $s 19904 64 check
--  mdadm -S $md0
-+	s=${ls#*/} l=${ls%/*}
-+	if [[ $l == 'raid1' ]]; then
-+		mdadm -CR --assume-clean -e 0.90 $md0 --level $l -n 4 $dlist
-+	else
-+		mdadm -CR --assume-clean -e 0.90 $md0 --level $l -n 4 -c 64 $dlist
-+	fi
-+	testdev $md0 $s 19904 64
-+	mdadm -S $md0
-+	mdadm -A $md0 --update=metadata $dlist
-+	testdev $md0 $s 19904 64 check
-+	mdadm -S $md0
- done
- 
- if mdadm -A $md0 --update=metadata $dlist
- then echo >&2 should fail with v1.0 metadata
--     exit 1
-+	exit 1
- fi
- 
- mdadm -CR -e 0.90 $md0 --level=6 -n4 -c32 $dlist
-@@ -33,7 +38,7 @@ mdadm -S $md0
- 
- if mdadm -A $md0 --update=metadata $dlist
- then echo >&2 should fail during resync
--     exit 1
-+	exit 1
- fi
- mdadm -A $md0 $dlist
- mdadm --wait $md0 || true
-@@ -48,5 +53,5 @@ mdadm -S $md0
- 
- if mdadm -A $md0 --update=metadata $dlist
- then echo >&2 should fail when bitmap present
--     exit 1
-+	exit 1
- fi
-diff --git a/tests/func.sh b/tests/func.sh
-index cfe83e55..db55542d 100644
---- a/tests/func.sh
-+++ b/tests/func.sh
-@@ -125,6 +125,7 @@ check_env() {
- 		MULTIPATH="yes"
- 	if [ "$MULTIPATH" != "yes" ]; then
- 		echo "test: skipping tests for multipath, which is removed in upstream 6.8+ kernels"
-+		skipping_multipath="yes"
- 	fi
- 
- 	# Check whether to run linear tests
-@@ -133,6 +134,7 @@ check_env() {
- 		LINEAR="yes"
- 	if [ "$LINEAR" != "yes" ]; then
- 		echo "test: skipping tests for linear, which is removed in upstream 6.8+ kernels"
-+		skipping_linear="yes"
- 	fi
- }
- 
--- 
-2.41.0
-

0088-mdadm-tests-05r5-internalbitmap.patch

@@ -1,68 +0,0 @@
-From 7664a3851476cfcda931d35f495d03f51707bac9 Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Wed, 22 May 2024 16:50:50 +0800
-Subject: [PATCH 088/157] mdadm/tests: 05r5-internalbitmap
-
-It's not right to compare bitmap bits with a number after io comes.
-Because maybe those bits are already flused. Remove the related
-tests.
-
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- tests/05r5-internalbitmap | 21 +++++++++------------
- 1 file changed, 9 insertions(+), 12 deletions(-)
-
-diff --git a/tests/05r5-internalbitmap b/tests/05r5-internalbitmap
-index 13dc5921..1a64482f 100644
---- a/tests/05r5-internalbitmap
-+++ b/tests/05r5-internalbitmap
-@@ -9,21 +9,20 @@ mdadm -S $md0
- 
- mdadm --assemble $md0 $dev1 $dev2 $dev3
- testdev $md0 2 $mdsize1 512
--dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- sleep 4
--dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
-+dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- 
--if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ]
--then  echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2"
-+if [ $dirty1 -ne 0 ]
-+then  echo >&2 "ERROR bad 'dirty' counts: $dirty1"
-   exit 1
- fi
- mdadm $md0 -f $dev1
- testdev $md0 2 $mdsize1 512
- sleep 4
--dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--if [ $dirty3 -lt 400 ]
-+dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
-+if [ $dirty2 -lt 400 ]
- then
--   echo >&2 "ERROR dirty count $dirty3 is too small"
-+   echo >&2 "ERROR dirty count $dirty2 is too small"
-    exit 2
- fi
- 
-@@ -33,14 +32,12 @@ mdadm --assemble -R $md0  $dev2 $dev3
- mdadm --zero $dev1 # force --add, not --re-add
- mdadm $md0 --add $dev1
- check recovery
--
--dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- check wait
- sleep 4
--dirty5=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
-+dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- 
--if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ]
--then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5"
-+if [ $dirty3 -ne 0 ]
-+then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty3"
-   exit 1
- fi
- 
--- 
-2.41.0
-

0089-mdadm-tests-06name-enhance.patch

@@ -1,38 +0,0 @@
-From 6e7d850a57d40e18d525d0739a4f4226f6057d91 Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Wed, 22 May 2024 16:50:52 +0800
-Subject: [PATCH 089/157] mdadm/tests: 06name enhance
-
-It needs to check hostname in metadata name if one array is
-local. Add the check in this case.
-
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- tests/06name | 10 ++++++++--
- 1 file changed, 8 insertions(+), 2 deletions(-)
-
-diff --git a/tests/06name b/tests/06name
-index 86eaab69..c3213f6c 100644
---- a/tests/06name
-+++ b/tests/06name
-@@ -3,8 +3,14 @@ set -x
- # create an array with a name
- 
- mdadm -CR $md0 -l0 -n2 --metadata=1 --name="Fred" $dev0 $dev1
--mdadm -E $dev0 | grep 'Name : Fred' > /dev/null || exit 1
--mdadm -D $md0 | grep 'Name : Fred' > /dev/null || exit 1
-+
-+if [ $is_foreign == "no" ]; then
-+	mdadm -E $dev0 | grep "Name : $(hostname):Fred" > /dev/null || exit 1
-+	mdadm -D $md0 | grep "Name : $(hostname):Fred" > /dev/null || exit 1
-+else
-+	mdadm -E $dev0 | grep "Name : Fred" > /dev/null || exit 1
-+	mdadm -D $md0 | grep "Name : Fred" > /dev/null || exit 1
-+fi
- mdadm -S $md0
- 
- mdadm -A $md0 --name="Fred" $devlist
--- 
-2.41.0
-

0090-mdadm-tests-07autoassemble.patch

@@ -1,108 +0,0 @@
-From 63e99a49cc02cbe4d1777b477719078897fc8308 Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Wed, 22 May 2024 16:50:53 +0800
-Subject: [PATCH 090/157] mdadm/tests: 07autoassemble
-
-This test is used to test stacked array auto assemble.
-
-There are two different cases depends on if array is foreign or not.
-If the array is foreign, the stacked array (md0 is on md1 and md2)
-can't be assembled with name md0. Because udev rule will run when md1
-and md2 are assembled and mdadm -I doesn't specify homehost. So it
-will treat stacked array (md0) as foreign array and choose md127 as
-the device node name (/dev/md127)
-
-Add the case that stacked array is local.
-
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- test                        |  2 ++
- tests/07autoassemble        | 37 +++++++++++++++++++++++++++++++++++--
- tests/07autoassemble.broken |  8 --------
- 3 files changed, 37 insertions(+), 10 deletions(-)
- delete mode 100644 tests/07autoassemble.broken
-
-diff --git a/test b/test
-index f09994e7..4a88de58 100755
---- a/test
-+++ b/test
-@@ -39,6 +39,8 @@ md2=/dev/md2
- # if user doesn't specify minor number, mdadm chooses minor number
- # automatically from 127.
- md127=/dev/md127
-+md126=/dev/md126
-+md125=/dev/md125
- mdp0=/dev/md_d0
- mdp1=/dev/md_d1
- 
-diff --git a/tests/07autoassemble b/tests/07autoassemble
-index e689be7c..9dc78149 100644
---- a/tests/07autoassemble
-+++ b/tests/07autoassemble
-@@ -10,7 +10,14 @@ mdadm -Ss
- mdadm -As -c /dev/null --homehost=testing -vvv
- testdev $md1 1 $mdsize1a 64
- testdev $md2 1 $mdsize1a 64
--testdev $md0 2 $mdsize11a 512
-+# md1 and md2 will be incremental assemble by udev rule. And
-+# the testing machines' hostname is not testing. The md0 will
-+# be considered as a foreign array. It can use 0 as metadata
-+# name. md127 will be used
-+testdev $md127 2 $mdsize11a 512
-+mdadm --stop $md127
-+mdadm --zero-superblock $md1
-+mdadm --zero-superblock $md2
- mdadm -Ss
- 
- mdadm --zero-superblock $dev0 $dev1 $dev2 $dev3
-@@ -20,5 +27,31 @@ mdadm -CR $md0 -l0 -n2 $md1 $dev2  --homehost=testing
- mdadm -Ss
- mdadm -As -c /dev/null --homehost=testing -vvv
- testdev $md1 1 $mdsize1a 64
--testdev $md0 1 $[mdsize1a+mdsize11a] 512
-+testdev $md127 1 $[mdsize1a+mdsize11a] 512
-+mdadm --stop $md127
-+mdadm --zero-superblock $md1
-+mdadm -Ss
-+
-+# Don't specify homehost when creating raid and use the test
-+# machine's homehost. For super1.2, if homehost name's length
-+# is > 32, it doesn't use homehost name in metadata name and
-+# the array will be treated as foreign array
-+mdadm --zero-superblock $dev0 $dev1 $dev2 $dev3
-+mdadm -CR $md1 -l1 -n2 $dev0 $dev1
-+mdadm -CR $md2 -l1 -n2 $dev2 $dev3
-+mdadm -CR $md0 -l0 -n2 $md1 $md2
-+mdadm -Ss
-+mdadm -As -c /dev/null
-+if [ $is_foreign == "yes" ]; then
-+	# md127 is md1
-+	testdev $md127 1 $mdsize1a 64
-+	# md126 is md0, udev rule incremental assemble it
-+	testdev $md126 2 $mdsize11a 512
-+	# md125 is md2
-+	testdev $md125 1 $mdsize1a 64
-+else
-+	testdev $md1 1 $mdsize1a 64
-+	testdev $md2 1 $mdsize1a 64
-+	testdev $md0 2 $mdsize11a 512
-+fi
- mdadm -Ss
-diff --git a/tests/07autoassemble.broken b/tests/07autoassemble.broken
-deleted file mode 100644
-index 8be09407..00000000
---- a/tests/07autoassemble.broken
-+++ /dev/null
-@@ -1,8 +0,0 @@
--always fails
--
--Prints lots of messages, but the array doesn't assemble. Error
--possibly related to:
--
--  mdadm: /dev/md/1 is busy - skipping
--  mdadm: no recogniseable superblock on /dev/md/testing:0
--  mdadm: /dev/md/2 is busy - skipping
--- 
-2.41.0
-

0091-mdadm-tests-07autodetect.broken-can-be-removed.patch

@@ -1,28 +0,0 @@
-From 1d0c61f4baa49bc218687017ccb2e3a664351390 Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Wed, 22 May 2024 16:50:54 +0800
-Subject: [PATCH 091/157] mdadm/tests: 07autodetect.broken can be removed
-
-07autodetect can run successfully without error in kernel 6.9.0-rc5.
-
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- tests/07autodetect.broken | 5 -----
- 1 file changed, 5 deletions(-)
- delete mode 100644 tests/07autodetect.broken
-
-diff --git a/tests/07autodetect.broken b/tests/07autodetect.broken
-deleted file mode 100644
-index 294954a1..00000000
---- a/tests/07autodetect.broken
-+++ /dev/null
-@@ -1,5 +0,0 @@
--always fails
--
--Fails with error:
--
--    ERROR: no resync happening
--- 
-2.41.0
-

0092-mdadm-tests-07changelevelintr.patch

@@ -1,73 +0,0 @@
-From cd3b2350bef136b20c81190371fb0b60d62a0365 Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Wed, 22 May 2024 16:50:55 +0800
-Subject: [PATCH 092/157] mdadm/tests: 07changelevelintr
-
-It needs to specify a 2 powered array size when updating array size.
-If not, it can't change chunksize.
-
-And sometimes it reports error reshape doesn't happen. In fact the
-reshape has finished. It doesn't need to wait before checking
-reshape action. Because check function waits itself.
-
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- tests/07changelevelintr        | 9 +++++----
- tests/07changelevelintr.broken | 9 ---------
- 2 files changed, 5 insertions(+), 13 deletions(-)
- delete mode 100644 tests/07changelevelintr.broken
-
-diff --git a/tests/07changelevelintr b/tests/07changelevelintr
-index 18c63092..d921f2b2 100644
---- a/tests/07changelevelintr
-+++ b/tests/07changelevelintr
-@@ -27,11 +27,9 @@ checkgeo() {
- }
- 
- restart() {
-- sleep 0.5
-  check reshape
-  mdadm -S $md0
-  mdadm -A $md0 $devs --backup-file=$bu
-- sleep 0.5
-  check reshape
- }
- 
-@@ -49,13 +47,16 @@ mdadm -G $md0 --layout rs --backup-file=$bu
- restart
- checkgeo md0 raid5 5 $[128*1024] 3
- 
--mdadm -G $md0 --array-size 58368
-+# It needs to shrink array size first. Choose a value that
-+# is power of 2 for array size. If not, it can't change
-+# chunk size.
-+mdadm -G $md0 --array-size 51200
- mdadm -G $md0 --raid-disks 4 -c 64 --backup-file=$bu
- restart
- checkgeo md0 raid5 4 $[64*1024] 3
- 
- devs="$dev0 $dev1 $dev2 $dev3"
--mdadm -G $md0 --array-size 19456
-+mdadm -G $md0 --array-size 18432
- mdadm -G $md0 -n 2 -c 256 --backup-file=$bu
- restart
- checkgeo md0 raid5 2 $[256*1024] 3
-diff --git a/tests/07changelevelintr.broken b/tests/07changelevelintr.broken
-deleted file mode 100644
-index 284b4906..00000000
---- a/tests/07changelevelintr.broken
-+++ /dev/null
-@@ -1,9 +0,0 @@
--always fails
--
--Fails with errors:
--
--  mdadm: this change will reduce the size of the array.
--         use --grow --array-size first to truncate array.
--         e.g. mdadm --grow /dev/md0 --array-size 56832
--
--  ERROR: no reshape happening
--- 
-2.41.0
-

0093-mdadm-tests-disable-selinux.patch

@@ -1,68 +0,0 @@
-From b914aa25ee1fe3e0bd97f58bdf2bfdd185992a79 Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Wed, 22 May 2024 16:50:56 +0800
-Subject: [PATCH 093/157] mdadm/tests: disable selinux
-
-Sometimes systemd service fails because selinux. Disable selinux
-during testing now. We can enable it in future when having a better
-method.
-
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- test          |  3 +++
- tests/func.sh | 10 ++++++++++
- 2 files changed, 13 insertions(+)
-
-diff --git a/test b/test
-index 4a88de58..47f53ad7 100755
---- a/test
-+++ b/test
-@@ -16,6 +16,8 @@ devlist=
- # For example, /dev/md0 is created, stops it, then assemble it, the
- # device node will be /dev/md127 (127 is choosed by mdadm autumatically)
- is_foreign="no"
-+#disable selinux
-+sys_selinux="Permissive"
- 
- skipping_linear="no"
- skipping_multipath="no"
-@@ -351,6 +353,7 @@ main() {
- 		fi
- 	done
- 
-+	restore_selinux
- 	exit 0
- }
- 
-diff --git a/tests/func.sh b/tests/func.sh
-index db55542d..b2e4d122 100644
---- a/tests/func.sh
-+++ b/tests/func.sh
-@@ -167,6 +167,15 @@ is_raid_foreign() {
- 	fi
- }
- 
-+record_selinux() {
-+	sys_selinux=`getenforce`
-+	setenforce Permissive
-+}
-+
-+restore_selinux() {
-+	setenforce $sys_selinux
-+}
-+
- do_setup() {
- 	trap cleanup 0 1 3 15
- 	trap ctrl_c 2
-@@ -247,6 +256,7 @@ do_setup() {
- 	echo 0 > /sys/module/md_mod/parameters/start_ro
- 	record_system_speed_limit
- 	is_raid_foreign
-+	record_selinux
- }
- 
- # check various things
--- 
-2.41.0
-

0094-mdadm-platform-intel-buffer-overflow-detected.patch

@@ -1,44 +0,0 @@
-From 827e1870f320545796d907f50af594e901399417 Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Tue, 28 May 2024 16:44:39 +0800
-Subject: [PATCH 094/157] mdadm/platform-intel: buffer overflow detected
-
-mdadm -CR /dev/md0 -l1 -n2 /dev/nvme0n1 /dev/nvme2n1
-*** buffer overflow detected ***: terminated
-Aborted (core dumped)
-
-It doesn't happen 100% and it depends on the building environment.
-It can be fixed by replacing sprintf with snprintf.
-
-Fixes: d835518b6b53 ('imsm: nvme multipath support')
-Reported-by: Guang Wu <guazhang@redhat.com>
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- platform-intel.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/platform-intel.c b/platform-intel.c
-index 15a9fa5a..d6a53533 100644
---- a/platform-intel.c
-+++ b/platform-intel.c
-@@ -907,14 +907,14 @@ char *get_nvme_multipath_dev_hw_path(const char *dev_path)
- 		return NULL;
- 
- 	for (ent = readdir(dir); ent; ent = readdir(dir)) {
--		char buf[strlen(dev_path) + strlen(ent->d_name) + 1];
-+		char buf[PATH_MAX];
- 
- 		/* Check if dir is a controller, ignore namespaces*/
- 		if (!(strncmp(ent->d_name, "nvme", 4) == 0) ||
- 		    (strrchr(ent->d_name, 'n') != &ent->d_name[0]))
- 			continue;
- 
--		sprintf(buf, "%s/%s", dev_path, ent->d_name);
-+		snprintf(buf, PATH_MAX, "%s/%s", dev_path, ent->d_name);
- 		rp = realpath(buf, NULL);
- 		break;
- 	}
--- 
-2.41.0
-

0095-mdadm-tests-bitmap-cases-enhance.patch

@@ -1,279 +0,0 @@
-From c006602b313e2f6062b51aad37d93dccd29649de Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Tue, 28 May 2024 21:51:47 +0800
-Subject: [PATCH 095/157] mdadm/tests: bitmap cases enhance
-
-It fails because bitmap dirty number is smaller than 400 sometimes. It's not
-good to compare bitmap dirty bits with a number. It depends on the test
-machine, it can flush soon before checking the number. So remove related codes.
-
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- tests/05r1-grow-internal      | 11 ++++-------
- tests/05r1-grow-internal-1    | 12 ++++--------
- tests/05r1-internalbitmap     | 22 ++++++++++------------
- tests/05r1-internalbitmap-v1a | 22 ++++++++++------------
- tests/05r1-internalbitmap-v1b | 23 ++++++++++-------------
- tests/05r1-internalbitmap-v1c | 22 ++++++++++------------
- 6 files changed, 48 insertions(+), 64 deletions(-)
-
-diff --git a/tests/05r1-grow-internal b/tests/05r1-grow-internal
-index 24b3aece..f7fff989 100644
---- a/tests/05r1-grow-internal
-+++ b/tests/05r1-grow-internal
-@@ -8,18 +8,15 @@ testdev $md0 1 $mdsize1a 64
- 
- #mdadm -E $dev1
- mdadm --grow $md0 --bitmap=internal --bitmap-chunk=4 --delay=1 || { mdadm -X $dev2 ; exit 1; }
--dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- sleep 4
--dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
-+dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- 
- testdev $md0 1 $mdsize1a 64
--dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- sleep 4
--dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
-+dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- 
--#echo $dirty1 $dirty2 $dirty3 $dirty4
--if [ $dirty2 -ne 0 -o $dirty4 -ne 0 -o $dirty3 -lt 400 ]
--then
-+if [ $dirty1 -ne 0 -o $dirty2 -ne 0 ]
-+then  echo >&2 "ERROR bad 'dirty' counts: dirty1 $dirty1, dirty2 $dirty2"
-    echo bad dirty counts
-    exit 1
- fi
-diff --git a/tests/05r1-grow-internal-1 b/tests/05r1-grow-internal-1
-index 2f0d8237..f0f8349f 100644
---- a/tests/05r1-grow-internal-1
-+++ b/tests/05r1-grow-internal-1
-@@ -8,19 +8,15 @@ testdev $md0 1 $mdsize1b 64
- 
- #mdadm -E $dev1
- mdadm --grow $md0 --bitmap=internal --bitmap-chunk=4 --delay=1
--dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- sleep 4
--dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
-+dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- 
- testdev $md0 1 $mdsize1b 64
--dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- sleep 4
--dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
-+dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- 
--#echo $dirty1 $dirty2 $dirty3 $dirty4
--if [ $dirty2 -ne 0 -o $dirty4 -ne 0 -o $dirty3 -lt 400 ]
--then
--   echo bad dirty counts
-+if [ $dirty1 -ne 0 -o $dirty2 -ne 0 ]
-+then  echo >&2 "ERROR bad 'dirty' counts: dirty1 $dirty1, dirty2 $dirty2"
-    exit 1
- fi
- 
-diff --git a/tests/05r1-internalbitmap b/tests/05r1-internalbitmap
-index dd7232a7..f1a2843e 100644
---- a/tests/05r1-internalbitmap
-+++ b/tests/05r1-internalbitmap
-@@ -9,21 +9,20 @@ mdadm -S $md0
- 
- mdadm --assemble $md0 $dev1 $dev2
- testdev $md0 1 $mdsize0 64
--dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- sleep 4
--dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
-+dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- 
--if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ]
--then  echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2"
-+if [ $dirty1 -ne 0 ]
-+then  echo >&2 "ERROR bad 'dirty' counts: $dirty1"
-   exit 1
- fi
- mdadm $md0 -f $dev1
- testdev $md0 1 $mdsize0 64
- sleep 4
--dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--if [ $dirty3 -lt 400 ]
--then
--   echo >&2 "ERROR dirty count $dirty3 is too small"
-+total=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) bits.*/\1/p'`
-+dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
-+if [ $dirty2 -ne $total ]
-+then  echo >&2 "ERROR bad 'dirty' counts: total $total, dirty2 $dirty2"
-    exit 2
- fi
- 
-@@ -34,13 +33,12 @@ mdadm --zero-superblock $dev1
- mdadm $md0 --add $dev1
- check recovery
- 
--dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- check wait
- sleep 4
--dirty5=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
-+dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- 
--if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ]
--then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5"
-+if [ $dirty3 -ne 0 ]
-+then  echo >&2 "ERROR bad 'dirty' counts: $dirty3"
-   exit 1
- fi
- 
-diff --git a/tests/05r1-internalbitmap-v1a b/tests/05r1-internalbitmap-v1a
-index 3ddc082f..cf3f3972 100644
---- a/tests/05r1-internalbitmap-v1a
-+++ b/tests/05r1-internalbitmap-v1a
-@@ -10,21 +10,20 @@ mdadm -S $md0
- 
- mdadm --assemble $md0 $dev1 $dev2
- testdev $md0 1 $mdsize1b 64
--dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- sleep 4
--dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
-+dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- 
--if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ]
--then  echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2"
-+if [ $dirty1 -ne 0 ]
-+then  echo >&2 "ERROR bad 'dirty' counts: $dirty1"
-   exit 1
- fi
- mdadm $md0 -f $dev1
- testdev $md0 1 $mdsize1b 64
- sleep 4
--dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--if [ $dirty3 -lt 400 ]
--then
--   echo >&2 "ERROR dirty count $dirty3 is too small"
-+total=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) bits.*/\1/p'`
-+dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
-+if [ $dirty2 -ne $total ]
-+then  echo >&2 "ERROR bad 'dirty' counts: total $total, dirty2 $dirty2"
-    exit 2
- fi
- 
-@@ -35,13 +34,12 @@ mdadm --assemble -R $md0  $dev2
- mdadm $md0 --add $dev1
- check recovery
- 
--dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- check wait
- sleep 4
--dirty5=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
-+dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- 
--if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ]
--then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5"
-+if [ $dirty3 -ne 0 ]
-+then  echo >&2 "ERROR bad 'dirty' counts: $dirty3"
-   exit 1
- fi
- 
-diff --git a/tests/05r1-internalbitmap-v1b b/tests/05r1-internalbitmap-v1b
-index 40f7abea..4952887e 100644
---- a/tests/05r1-internalbitmap-v1b
-+++ b/tests/05r1-internalbitmap-v1b
-@@ -11,21 +11,20 @@ mdadm -S $md0
- mdadm --assemble $md0 $dev1 $dev2
- check bitmap
- testdev $md0 1 $mdsize11 64
--dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- sleep 4
--dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
-+dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- 
--if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ]
--then  echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2"
-+if [ $dirty1 -ne 0 ]
-+then  echo >&2 "ERROR bad 'dirty' counts: $dirty1"
-   exit 1
- fi
- mdadm $md0 -f $dev1
- testdev $md0 1 $mdsize11 64
- sleep 4
--dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--if [ $dirty3 -lt 400 ]
--then
--   echo >&2 "ERROR dirty count $dirty3 is too small"
-+total=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) bits.*/\1/p'`
-+dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
-+if [ $dirty2 -ne $total ]
-+then  echo >&2 "ERROR bad 'dirty' counts: total $total, dirty2 $dirty2"
-    exit 2
- fi
- 
-@@ -35,14 +34,12 @@ mdadm --zero-superblock $dev1
- mdadm --assemble -R $md0  $dev2
- mdadm $md0 --add $dev1
- check recovery
--
--dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- check wait
- sleep 4
--dirty5=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
-+dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- 
--if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ]
--then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5"
-+if [ $dirty3 -ne 0 ]
-+then  echo >&2 "ERROR bad 'dirty' counts: $dirty3"
-   exit 1
- fi
- 
-diff --git a/tests/05r1-internalbitmap-v1c b/tests/05r1-internalbitmap-v1c
-index 2eaea59b..e1e4472f 100644
---- a/tests/05r1-internalbitmap-v1c
-+++ b/tests/05r1-internalbitmap-v1c
-@@ -10,21 +10,20 @@ mdadm -S $md0
- 
- mdadm --assemble $md0 $dev1 $dev2
- testdev $md0 1 $mdsize12 64
--dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- sleep 4
--dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
-+dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- 
--if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ]
--then  echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2"
-+if [ $dirty1 -ne 0 ]
-+then  echo >&2 "ERROR bad 'dirty' counts: $dirty1"
-   exit 1
- fi
- mdadm $md0 -f $dev1
- testdev $md0 1 $mdsize12 64
- sleep 4
--dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
--if [ $dirty3 -lt 400 ]
--then
--   echo >&2 "ERROR dirty count $dirty3 is too small"
-+total=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) bits.*/\1/p'`
-+dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
-+if [ $dirty2 -ne $total ]
-+then  echo >&2 "ERROR bad 'dirty' counts: total $total, dirty2 $dirty2"
-    exit 2
- fi
- 
-@@ -35,13 +34,12 @@ mdadm --assemble -R $md0  $dev2
- mdadm $md0 --add $dev1
- check recovery
- 
--dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- check wait
- sleep 4
--dirty5=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
-+dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'`
- 
--if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ]
--then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5"
-+if [ $dirty3 -ne 0 ]
-+then  echo >&2 "ERROR bad 'dirty' counts: $dirty3"
-   exit 1
- fi
- 
--- 
-2.41.0
-

0096-mdadm-tests-04update-uuid.patch

@@ -1,39 +0,0 @@
-From 19cde79fda386329f69ead15ca6ae26527fab707 Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Tue, 28 May 2024 21:51:48 +0800
-Subject: [PATCH 096/157] mdadm/tests: 04update-uuid
-
-Patch 50b100768a11('mdadm: deprecate bitmap custom file') needs to confirm when
-creating raid device with bitmap file.
-
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- tests/04update-uuid | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/tests/04update-uuid b/tests/04update-uuid
-index a4409e78..25314ab5 100644
---- a/tests/04update-uuid
-+++ b/tests/04update-uuid
-@@ -25,7 +25,7 @@ mdadm -S /dev/md0
- 
- # now if we have a bitmap, that needs updating too.
- rm -f $targetdir/bitmap
--mdadm -CR --assume-clean -b $targetdir/bitmap $md0 -l5 -n3 $dev0 $dev1 $dev2
-+yes | mdadm -CR --assume-clean -b $targetdir/bitmap $md0 -l5 -n3 $dev0 $dev1 $dev2
- mdadm -S /dev/md0
- mdadm -A /dev/md0 -b $targetdir/bitmap --update=uuid --uuid=0123456789abcdef:fedcba9876543210 $dev0 $dev1 $dev2
- no_errors
-@@ -41,7 +41,7 @@ mdadm -S /dev/md0
- 
- # and bitmap for version1
- rm -f $targetdir/bitmap
--mdadm -CR --assume-clean -e1.1 -b $targetdir/bitmap $md0 -l5 -n3 $dev0 $dev1 $dev2
-+yes | mdadm -CR --assume-clean -e1.1 -b $targetdir/bitmap $md0 -l5 -n3 $dev0 $dev1 $dev2
- mdadm -S /dev/md0
- mdadm -A /dev/md0 -b $targetdir/bitmap --update=uuid --uuid=0123456789abcdef:fedcba9876543210 $dev0 $dev1 $dev2
- no_errors
--- 
-2.41.0
-

0097-mdadm-tests-05r1-re-add-nosuper.patch

@@ -1,30 +0,0 @@
-From c36477fac2e485fd294e5cb48d411b548c654f30 Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Tue, 28 May 2024 21:51:49 +0800
-Subject: [PATCH 097/157] mdadm/tests: 05r1-re-add-nosuper
-
-Patch 50b100768a11('mdadm: deprecate bitmap custom file') needs to confirm when
-creating raid device with bitmap file.
-
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- tests/05r1-re-add-nosuper | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/tests/05r1-re-add-nosuper b/tests/05r1-re-add-nosuper
-index 058d602d..7d41fd7b 100644
---- a/tests/05r1-re-add-nosuper
-+++ b/tests/05r1-re-add-nosuper
-@@ -6,7 +6,7 @@
- #
- bmf=$targetdir/bitmap2
- rm -f $bmf
--mdadm -B $md0 -l1 -n2 -b$bmf -d1 $dev1 $dev2
-+yes | mdadm -B $md0 -l1 -n2 -b$bmf -d1 $dev1 $dev2
- check resync
- check wait
- testdev $md0 1 $size 1
--- 
-2.41.0
-

0098-mdadm-tests-remove-strace-test.patch

@@ -1,44 +0,0 @@
-From c5a4fe7874f94b3f172027043f9a94b037f4d4dd Mon Sep 17 00:00:00 2001
-From: Xiao Ni <xni@redhat.com>
-Date: Tue, 28 May 2024 21:51:50 +0800
-Subject: [PATCH 098/157] mdadm/tests: remove strace test
-
-Some tests will fail if the test env doesn't have strace
-commands. So remove the dependency.
-
-Signed-off-by: Xiao Ni <xni@redhat.com>
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- tests/07revert-grow    | 2 +-
- tests/07revert-inplace | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/tests/07revert-grow b/tests/07revert-grow
-index c8c4e855..333483dc 100644
---- a/tests/07revert-grow
-+++ b/tests/07revert-grow
-@@ -43,7 +43,7 @@ testdev $md0 2 $mdsize1 512
- mdadm -G $md0 -n 5
- sleep 3
- mdadm -S $md0
--strace -o /tmp/str ./mdadm -A $md0 --update=revert-reshape $devlist4
-+mdadm -A $md0 --update=revert-reshape $devlist4
- check wait
- check raid10
- testdev $md0 2 $mdsize1 512
-diff --git a/tests/07revert-inplace b/tests/07revert-inplace
-index a73eb977..776324ac 100644
---- a/tests/07revert-inplace
-+++ b/tests/07revert-inplace
-@@ -37,7 +37,7 @@ testdev $md0 3 $mdsize1 64
- mdadm -G $md0 -c 32
- sleep 2
- mdadm -S $md0
--strace -o /tmp/str ./mdadm -A $md0 --update=revert-reshape $devlist5
-+mdadm -A $md0 --update=revert-reshape $devlist5
- check wait
- check raid10
- testdev $md0 3 $mdsize1 64
--- 
-2.41.0
-

0099-mdadm.h-provide-basename-if-GLIBC-is-not-avialable.patch

@@ -1,37 +0,0 @@
-From 9dbd11e091f84eb0bf9d717283774816c4c4453d Mon Sep 17 00:00:00 2001
-From: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
-Date: Tue, 21 May 2024 16:26:33 +0200
-Subject: [PATCH 099/157] mdadm.h: provide basename if GLIBC is not avialable
-
-If GNU basename is not avilable, define it. It is safer to use that
-rather than include libgen.h with XPG basename() definition.
-
-Fixes:#12
-
-Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
----
- mdadm.h | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
-diff --git a/mdadm.h b/mdadm.h
-index 40818941..e9f764a2 100644
---- a/mdadm.h
-+++ b/mdadm.h
-@@ -223,6 +223,14 @@ struct dlm_lksb {
- struct __una_u16 { __u16 x; } __attribute__ ((packed));
- struct __una_u32 { __u32 x; } __attribute__ ((packed));
- 
-+/*
-+ * Ensure GNU basename behavior on GLIBC less systems.
-+ */
-+#ifndef __GLIBC__
-+#define basename(path) \
-+       (strrchr((path), '/') ? strrchr((path),'/') + 1 : (path))
-+#endif
-+
- static inline __u16 __get_unaligned16(const void *p)
- {
- 	const struct __una_u16 *ptr = (const struct __una_u16 *)p;
--- 
-2.41.0
-