import mdadm-4.2-rc2_1.el9.2

.gitignore

@@ -0,0 +1 @@
+SOURCES/mdadm-4.2-rc2.tar.xz

.mdadm.metadata

@@ -0,0 +1 @@
+b6e99ec4b0c3953505dc2e6ef6e8f2a71a26207d SOURCES/mdadm-4.2-rc2.tar.xz

SOURCES/disable-Werror.patch

@@ -0,0 +1,11 @@
+--- mdadm/Makefile.orig	2021-07-28 21:39:23.887433859 +0800
++++ mdadm/Makefile	2021-07-28 21:39:37.989432841 +0800
+@@ -50,7 +50,7 @@
+ CC := $(CROSS_COMPILE)gcc
+ endif
+ CXFLAGS ?= -ggdb
+-CWFLAGS = -Wall -Werror -Wstrict-prototypes -Wextra -Wno-unused-parameter
++CWFLAGS = -Wall -Wstrict-prototypes -Wextra -Wno-unused-parameter
+ ifdef WARN_UNUSED
+ CWFLAGS += -Wp,-D_FORTIFY_SOURCE=2 -O3
+ endif

SOURCES/mdadm-2.5.2-static.patch

@@ -0,0 +1,23 @@
+--- mdadm-3.2.1/Makefile.static	2021-01-11 15:46:47.292126848 +0800
++++ mdadm-3.2.1/Makefile	2021-01-11 15:46:10.720192519 +0800
+@@ -248,16 +248,16 @@
+ install : install-bin install-man install-udev
+ 
+ install-static : mdadm.static install-man
+-	$(INSTALL) -D $(STRIP) -m 755 mdadm.static $(DESTDIR)$(BINDIR)/mdadm
++	$(INSTALL) -D $(STRIP) -m 755 mdadm.static $(DESTDIR)$(BINDIR)/mdadm.static
+ 
+ install-tcc : mdadm.tcc install-man
+-	$(INSTALL) -D $(STRIP) -m 755 mdadm.tcc $(DESTDIR)$(BINDIR)/mdadm
++	$(INSTALL) -D $(STRIP) -m 755 mdadm.tcc $(DESTDIR)$(BINDIR)/mdadm.tcc
+ 
+ install-uclibc : mdadm.uclibc install-man
+-	$(INSTALL) -D $(STRIP) -m 755 mdadm.uclibc $(DESTDIR)$(BINDIR)/mdadm
++	$(INSTALL) -D $(STRIP) -m 755 mdadm.uclibc $(DESTDIR)$(BINDIR)/mdadm.uclibc
+ 
+ install-klibc : mdadm.klibc install-man
+-	$(INSTALL) -D $(STRIP) -m 755 mdadm.klibc $(DESTDIR)$(BINDIR)/mdadm
++	$(INSTALL) -D $(STRIP) -m 755 mdadm.klibc $(DESTDIR)$(BINDIR)/mdadm.klibc
+ 
+ install-man: mdadm.8 md.4 mdadm.conf.5 mdmon.8
+ 	$(INSTALL) -D -m 644 mdadm.8 $(DESTDIR)$(MAN8DIR)/mdadm.8

SOURCES/mdadm-3.3-udev.patch

@@ -0,0 +1,13 @@
+--- mdadm/udev-md-raid-assembly.rules~	2018-07-09 18:24:27.450774446 +0800
++++ mdadm/udev-md-raid-assembly.rules	2018-07-09 18:25:12.630735637 +0800
+@@ -5,6 +5,10 @@
+ ENV{ANACONDA}=="?*", GOTO="md_inc_end"
+ # assemble md arrays
+ 
++# In Fedora we handle the raid components in 65-md-incremental.rules so that
++# we can do things like honor anaconda command line options and such
++GOTO="md_inc_end"
++
+ SUBSYSTEM!="block", GOTO="md_inc_end"
+ 
+ # skip non-initialized devices

SOURCES/mdadm-raid-check-sysconfig

@@ -0,0 +1,60 @@
+#!/bin/bash
+#
+# Configuration file for /etc/cron.weekly/raid-check
+#
+# options:
+#	ENABLED - must be yes in order for the raid check to proceed
+#	CHECK - can be either check or repair depending on the type of
+#		operation the user desires.  A check operation will scan
+#		the drives looking for bad sectors and automatically
+#		repairing only bad sectors.  If it finds good sectors that
+#		contain bad data (meaning that the data in a sector does
+#		not agree with what the data from another disk indicates
+#		the data should be, for example the parity block + the other
+#		data blocks would cause us to think that this data block
+#		is incorrect), then it does nothing but increments the
+#		counter in the file /sys/block/$dev/md/mismatch_count.
+#		This allows the sysadmin to inspect the data in the sector
+#		and the data that would be produced by rebuilding the
+#		sector from redundant information and pick the correct
+#		data to keep.  The repair option does the same thing, but
+#		when it encounters a mismatch in the data, it automatically
+#		updates the data to be consistent.  However, since we really
+#		don't know whether it's the parity or the data block that's
+#		correct (or which data block in the case of raid1), it's
+#		luck of the draw whether or not the user gets the right
+#		data instead of the bad data.  This option is the default
+#		option for devices not listed in either CHECK_DEVS or
+#		REPAIR_DEVS.
+#	CHECK_DEVS - a space delimited list of devs that the user specifically
+#		wants to run a check operation on.
+#	REPAIR_DEVS - a space delimited list of devs that the user
+#		specifically wants to run a repair on.
+#	SKIP_DEVS - a space delimited list of devs that should be skipped
+#	NICE - Change the raid check CPU and IO priority in order to make
+#		the system more responsive during lengthy checks.  Valid
+#		values are high, normal, low, idle.
+#	MAXCONCURENT - Limit the number of devices to be checked at a time.
+#		By default all devices will be checked at the same time.
+#
+# Note: the raid-check script intentionaly runs last in the cron.weekly
+# sequence.  This is so we can wait for all the resync operations to complete
+# and then check the mismatch_count on each array without unduly delaying
+# other weekly cron jobs.  If any arrays have a non-0 mismatch_count after
+# the check completes, we echo a warning to stdout which will then me emailed
+# to the admin as long as mails from cron jobs have not been redirected to
+# /dev/null.  We do not wait for repair operations to complete as the
+# md stack will correct any mismatch_cnts automatically.
+#
+# Note2: you can not use symbolic names for the raid devices, such as you
+# /dev/md/root.  The names used in this file must match the names seen in
+# /proc/mdstat and in /sys/block.
+
+ENABLED=yes
+CHECK=check
+NICE=low
+# To check devs /dev/md0 and /dev/md3, use "md0 md3"
+CHECK_DEVS=""
+REPAIR_DEVS=""
+SKIP_DEVS=""
+MAXCONCURRENT=

SOURCES/mdadm.conf

@@ -0,0 +1 @@
+d /run/mdadm 0710 root root -

SOURCES/mdadm.rules

@@ -0,0 +1,67 @@
+# This file causes block devices with Linux RAID (mdadm) signatures to
+# automatically cause mdadm to be run.
+# See udev(8) for syntax
+
+# Don't process any events if anaconda is running as anaconda brings up
+# raid devices manually
+ENV{ANACONDA}=="?*", GOTO="md_end"
+
+# Also don't process disks that are slated to be a multipath device
+ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="md_end"
+
+# We process add events on block devices (since they are ready as soon as
+# they are added to the system), but we must process change events as well
+# on any dm devices (like LUKS partitions or LVM logical volumes) and on
+# md devices because both of these first get added, then get brought live
+# and trigger a change event.  The reason we don't process change events
+# on bare hard disks is because if you stop all arrays on a disk, then
+# run fdisk on the disk to change the partitions, when fdisk exits it
+# triggers a change event, and we want to wait until all the fdisks on
+# all member disks are done before we do anything.  Unfortunately, we have
+# no way of knowing that, so we just have to let those arrays be brought
+# up manually after fdisk has been run on all of the disks.
+
+# First, process all add events (md and dm devices will not really do
+# anything here, just regular disks, and this also won't get any imsm
+# array members either)
+SUBSYSTEM=="block", ACTION=="add", ENV{ID_FS_TYPE}=="linux_raid_member", \
+	IMPORT{program}="/sbin/mdadm -I $env{DEVNAME} --export $devnode --offroot $${DEVLINKS}"
+SUBSYSTEM=="block", ACTION=="add", ENV{ID_FS_TYPE}=="linux_raid_member", \
+	ENV{MD_STARTED}=="*unsafe*", ENV{MD_FOREIGN}=="no", ENV{SYSTEMD_WANTS}+="mdadm-last-resort@$env{MD_DEVICE}.timer"
+SUBSYSTEM=="block", ACTION=="remove", ENV{ID_PATH}=="?*", \
+	ENV{ID_FS_TYPE}=="linux_raid_member", \
+	RUN+="/sbin/mdadm -If $name --path $env{ID_PATH}"
+SUBSYSTEM=="block", ACTION=="remove", ENV{ID_PATH}!="?*", \
+	ENV{ID_FS_TYPE}=="linux_raid_member", \
+	RUN+="/sbin/mdadm -If $name"
+
+# Next, check to make sure the BIOS raid stuff wasn't turned off via cmdline
+IMPORT{cmdline}="noiswmd"
+IMPORT{cmdline}="nodmraid"
+ENV{noiswmd}=="?*", GOTO="md_imsm_inc_end"
+ENV{nodmraid}=="?*", GOTO="md_imsm_inc_end"
+SUBSYSTEM=="block", ACTION=="add", ENV{ID_FS_TYPE}=="isw_raid_member", \
+	RUN+="/sbin/mdadm -I $env{DEVNAME}"
+SUBSYSTEM=="block", ACTION=="remove", ENV{ID_PATH}=="?*", \
+	ENV{ID_FS_TYPE}=="isw_raid_member", \
+	RUN+="/sbin/mdadm -If $name --path $env{ID_PATH}"
+SUBSYSTEM=="block", ACTION=="remove", ENV{ID_PATH}!="?*", \
+	ENV{ID_FS_TYPE}=="isw_raid_member", \
+	RUN+="/sbin/mdadm -If $name"
+LABEL="md_imsm_inc_end"
+
+# Next make sure that this isn't a dm device we should skip for some reason
+ENV{DM_UDEV_RULES_VSN}!="?*", GOTO="dm_change_end"
+ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", GOTO="dm_change_end"
+ENV{DM_SUSPENDED}=="1", GOTO="dm_change_end"
+KERNEL=="dm-*", SUBSYSTEM=="block", ENV{ID_FS_TYPE}=="linux_raid_member", \
+	ACTION=="change", RUN+="/sbin/mdadm -I $env{DEVNAME}"
+LABEL="dm_change_end"
+
+# Finally catch any nested md raid arrays.  If we brought up an md raid
+# array that's part of another md raid array, it won't be ready to be used
+# until the change event that occurs when it becomes live
+KERNEL=="md*", SUBSYSTEM=="block", ENV{ID_FS_TYPE}=="linux_raid_member", \
+	ACTION=="change", RUN+="/sbin/mdadm -I $env{DEVNAME}"
+
+LABEL="md_end"

SOURCES/mdadm_event.conf

@@ -0,0 +1,5 @@
+# Save /proc/mdstat in case of crash in mdadm/mdmon
+
+EVENT=post-create component=mdadm
+	cat /proc/mdstat >> mdstat_data
+	echo "Saved output of /proc/mdstat"

SOURCES/mdmonitor.service

@@ -0,0 +1,12 @@
+[Unit]
+Description=Software RAID monitoring and management
+ConditionPathExists=/etc/mdadm.conf
+
+[Service]
+Type=forking
+PIDFile=/run/mdadm/mdadm.pid
+EnvironmentFile=-/etc/sysconfig/mdmonitor
+ExecStart=/sbin/mdadm --monitor --scan --syslog -f --pid-file=/run/mdadm/mdadm.pid
+
+[Install]
+WantedBy=multi-user.target

SOURCES/raid-check

@@ -0,0 +1,135 @@
+#!/bin/bash
+#
+# This script reads it's configuration from /etc/sysconfig/raid-check
+# Please use that file to enable/disable this script or to set the
+# type of check you wish performed.
+
+# We might be on a kernel with no raid support at all, exit if so
+[ -f /proc/mdstat ] || exit 0
+
+# and exit if we haven't been set up properly
+[ -f /etc/sysconfig/raid-check ] || exit 0
+. /etc/sysconfig/raid-check
+
+# Wait until no more than arg1 arrays in arg2 list are busy
+waitbusy() {
+    local threshold=$(($1 + 1))
+    local dev_list="$2"
+    while true
+    do
+	local busy=0
+	local dev=""
+	for dev in $dev_list; do
+	    local sync_action=`cat /sys/block/$dev/md/sync_action`
+	    if [ "$sync_action" != "idle" ]; then
+		let busy++
+	    fi
+	done
+        [ $busy -lt $threshold ] && break
+	sleep 60
+    done
+}
+
+[ "$ENABLED" != "yes" ] && exit 0
+
+case "$CHECK" in
+    check) ;;
+    repair) ;;
+    *) exit 0;;
+esac
+
+ionice=""
+renice=""
+case $NICE in
+    high)
+	renice="-n -5"
+	;;
+    low)
+	renice="-n 5"
+	ionice="-c2 -n7"
+	;;
+    idle)
+	renice="-n 15"
+	ionice="-c3"
+	;;
+    *)
+	;;
+esac
+
+active_list=`grep "^md.*: active" /proc/mdstat | cut -f 1 -d ' '`
+[ -z "$active_list" ] && exit 0
+
+declare -A check
+dev_list=""
+check_list=""
+for dev in $active_list; do
+    echo $SKIP_DEVS | grep -w $dev >&/dev/null && continue
+    if [ -f /sys/block/$dev/md/sync_action ]; then
+	# Only perform the checks on idle, healthy arrays, but delay
+	# actually writing the check field until the next loop so we
+	# don't switch currently idle arrays to active, which happens
+	# when two or more arrays are on the same physical disk
+	array_state=`cat /sys/block/$dev/md/array_state`
+	if [ "$array_state" != "clean" -a "$array_state" != "active" ]; then
+	    continue
+	fi
+	sync_action=`cat /sys/block/$dev/md/sync_action`
+	if [ "$sync_action" != idle ]; then
+	    continue
+	fi
+	ck=""
+	echo $REPAIR_DEVS | grep -w $dev >&/dev/null && ck="repair"
+	echo $CHECK_DEVS | grep -w $dev >&/dev/null && ck="check"
+	[ -z "$ck" ] && ck=$CHECK
+	dev_list="$dev_list $dev"
+	check[$dev]=$ck
+	[ "$ck" = "check" ] && check_list="$check_list $dev"
+    fi
+done
+[ -z "$dev_list" ] && exit 0
+
+for dev in $dev_list; do
+    #Only run $MAXCONCURRENT checks at a time
+    if [ -n "$MAXCONCURRENT" ]; then
+	waitbusy $((MAXCONCURRENT - 1)) "$dev_list"
+    fi
+    echo "${check[$dev]}" > /sys/block/$dev/md/sync_action
+
+    resync_pid=""
+    wait=10
+    while [ $wait -gt 0 -a -z "$resync_pid" ]; do
+	sleep 6
+	let wait--
+	resync_pid=$(ps -ef | awk -v mddev=$dev 'BEGIN { pattern = "^\\[" mddev "_resync]$" } $8 ~ pattern { print $2 }')
+    done
+    [ -n "$resync_pid" -a -n "$renice" ] &&
+    	renice $renice -p $resync_pid >&/dev/null
+    [ -n "$resync_pid" -a -n "$ionice" ] &&
+    	ionice $ionice -p $resync_pid >&/dev/null
+done
+[ -z "$check_list" ] && exit 0
+
+waitbusy 0 "$check_list"
+
+for dev in $check_list; do
+	mismatch_cnt=`cat /sys/block/$dev/md/mismatch_cnt`
+	# Due to the fact that raid1/10 writes in the kernel are unbuffered,
+	# a raid1 array can have non-0 mismatch counts even when the
+	# array is healthy.  These non-0 counts will only exist in
+	# transient data areas where they don't pose a problem.  However,
+	# since we can't tell the difference between a non-0 count that
+	# is just in transient data or a non-0 count that signifies a
+	# real problem, simply don't check the mismatch_cnt on raid1
+	# devices as it's providing far too many false positives.  But by
+	# leaving the raid1 device in the check list and performing the
+	# check, we still catch and correct any bad sectors there might
+	# be in the device.
+	raid_lvl=`cat /sys/block/$dev/md/level`
+	if [ "$raid_lvl" = "raid1" -o "$raid_lvl" = "raid10" ]; then
+	    continue
+	fi
+	if [ "$mismatch_cnt" -ne 0 ]; then
+		echo "WARNING: mismatch_cnt is not 0 on /dev/$dev"
+	fi
+done
+

SOURCES/raid-check.service

@@ -0,0 +1,6 @@
+[Unit]
+Description=RAID setup health check
+
+[Service]
+Type=oneshot
+ExecStart=/usr/sbin/raid-check

SOURCES/raid-check.timer

@@ -0,0 +1,10 @@
+[Unit]
+Description=Weekly RAID setup health check
+
+[Timer]
+OnCalendar=Sun *-*-* 01:00:00
+Persistent=true
+AccuracySec=24h
+
+[Install]
+WantedBy=timers.target