rpms/lvm2
7
0
Fork 0
Code Issues Pull Requests Releases Activity
a1b8217005
lvm2/SOURCES/0103-vdo-enhance-lvm_vdo_import.patch
eabdullin d25b3eb897 import UBI lvm2-2.03.14-13.el8_9
2023-11-14 20:01:16 +00:00

565 lines
20 KiB
Diff
Raw Blame History

From 80a59e88c995b9935042e2d3f803b411353bf6d5 Mon Sep 17 00:00:00 2001
From: Zdenek Kabelac <zkabelac@redhat.com>
Date: Thu, 11 May 2023 20:07:37 +0200
Subject: [PATCH 103/115] vdo: enhance lvm_vdo_import
Add support for usage of 'dm-snapshot' for doing whole device conversion
in a snapshot which could be merged once the whole conversion has been
made.
This helps with cases where there would be any unexpected failure in the
middle of conversion process and user can continue using original
device until problem in conversion is fixed.
Import tool now uses 'truncate' tool to create a small backend file (20M) for loop device
to hold COW exception store.
Option --vdo-config has been added to allow specifing location of vdo
configuration file.
Option --no-snapshot allows to use import tool without creation of
snapshot, however recovery after finished VDO conversion and unfinished
lvm2 conversion is then very difficult.
Option --uuid-prefix allow to specify DM UUID prefix for snapshot
device.
Use read with -r.
(cherry picked from commit be6c34212b05d8c59c0ba68e26c56cddf61c9f04)
---
scripts/lvm_import_vdo.sh | 375 ++++++++++++++++++++++++++++----------
1 file changed, 282 insertions(+), 93 deletions(-)
diff --git a/scripts/lvm_import_vdo.sh b/scripts/lvm_import_vdo.sh
index 134c96513..bae4b52d1 100755
--- a/scripts/lvm_import_vdo.sh
+++ b/scripts/lvm_import_vdo.sh
@@ -1,6 +1,6 @@
#!/bin/bash
#
-# Copyright (C) 2021 Red Hat, Inc. All rights reserved.
+# Copyright (C) 2021-2023 Red Hat, Inc. All rights reserved.
#
# This file is part of LVM2.
#
@@ -19,7 +19,7 @@
# Needed utilities:
# lvm, dmsetup,
# vdo,
-# grep, awk, sed, blockdev, readlink, stat, mkdir
+# grep, awk, sed, blockdev, readlink, stat, mkdir, truncate
#
# Conversion is using 'vdo convert' support from VDO manager to move
# existing VDO header by 2M which makes space to place in PV header
@@ -29,6 +29,9 @@
set -euE -o pipefail
TOOL=lvm_import_vdo
+IMPORT_NAME="VDO_${TOOL}_${RANDOM}$$"
+test ${#IMPORT_NAME} -lt 100 || error "Random name \"$IMPORT_NAME\" is too long!"
+TEMPDIR="${TMPDIR:-/tmp}/$IMPORT_NAME"
_SAVEPATH=$PATH
PATH="/sbin:/usr/sbin:/bin:/usr/sbin:$PATH"
@@ -36,26 +39,40 @@ PATH="/sbin:/usr/sbin:/bin:/usr/sbin:$PATH"
# user may override lvm location by setting LVM_BINARY
LVM=${LVM_BINARY:-lvm}
VDO=${VDO_BINARY:-vdo}
-VDOCONF=${VDOCONF:-}
BLOCKDEV="blockdev"
+LOSETUP="losetup"
READLINK="readlink"
READLINK_E="-e"
STAT="stat"
MKDIR="mkdir"
+TRUNCATE="truncate"
DMSETUP="dmsetup"
-TEMPDIR="${TMPDIR:-/tmp}/${TOOL}_${RANDOM}$$"
DM_DEV_DIR="${DM_DEV_DIR:-/dev}"
-
-DEVICENAME=""
+DM_UUID_PREFIX="${DM_UUID_PREFIX:-}"
+DM_VG_NAME=
+DM_LV_NAME=
+VDO_CONFIG=${VDO_CONFIG:-} # can be overriden with --vdo-config
+VDOCONF=
+test -n "$VDO_CONFIG" && VDOCONF="-f $VDO_CONFIG"
+
+DEVICE=
+VGNAME=
+LVNAME=
DEVMAJOR=0
DEVMINOR=0
PROMPTING=""
+USE_VDO_DM_SNAPSHOT=1
+VDO_DM_SNAPSHOT_NAME=
+VDO_DM_SNAPSHOT_DEVICE=
+VDO_SNAPSHOT_LOOP=
DRY=0
VERB=""
FORCE=""
YES=""
+ABORT_AFTER_VDO_CONVERT=0
+VDO_ALLOCATION_PARAMS=
# default name for converted VG and its VDO LV
DEFAULT_NAME="vdovg/vdolvol"
@@ -74,6 +91,9 @@ tool_usage() {
echo " -v | --verbose Be verbose"
echo " -y | --yes Answer \"yes\" at any prompts"
echo " --dry-run Print verbosely commands without running them"
+ echo " --no-snapshot Do not use snapshot for converted VDO device"
+ echo " --uuid-prefix Prefix for DM snapshot uuid"
+ echo " --vdo-config Configuration file for VDO manager"
exit
}
@@ -102,12 +122,79 @@ dry() {
cleanup() {
trap '' 2
+ test -n "$VDO_DM_SNAPSHOT_NAME" && { "$DMSETUP" remove "$VDO_DM_SNAPSHOT_NAME" || true ; }
+ test -n "$VDO_SNAPSHOT_LOOP" && { "$LOSETUP" -d "$VDO_SNAPSHOT_LOOP" || true ; }
+
test -z "$PROMPTING" || echo "No"
- rm -rf "$TEMPDIR"
+ rm -rf "$TEMPDIR" || true
# error exit status for break
exit "${1:-1}"
}
+# Create snapshot target like for persistent snapshot with 16KiB chunksize
+snapshot_target_line_() {
+ echo "0 $("$BLOCKDEV" --getsize "$1") snapshot${3:-} $1 $2 P 32"
+}
+
+snapshot_create_() {
+ VDO_DM_SNAPSHOT_NAME="${IMPORT_NAME}_snap"
+ local file="$TEMPDIR/$VDO_DM_SNAPSHOT_NAME"
+
+ # TODO: maybe use ramdisk via 'brd' device ?)
+ "$TRUNCATE" -s 20M "$file"
+ VDO_SNAPSHOT_LOOP=$("$LOSETUP" -f --show "$file")
+ "$DMSETUP" create "$VDO_DM_SNAPSHOT_NAME" -u "${DM_UUID_PREFIX}-${VDO_DM_SNAPSHOT_NAME}-priv" --table "$(snapshot_target_line_ "$1" "$VDO_SNAPSHOT_LOOP")"
+ VDO_DM_SNAPSHOT_DEVICE="$DM_DEV_DIR/mapper/$VDO_DM_SNAPSHOT_NAME"
+ verbose "Snapshot of VDO device $1 created: $VDO_DM_SNAPSHOT_DEVICE."
+}
+
+snapshot_merge_() {
+ local status
+ local inital_status
+
+ initial_status=( $("$DMSETUP" status "$VDO_DM_SNAPSHOT_NAME") )
+ "$DMSETUP" reload "$VDO_DM_SNAPSHOT_NAME" --table "$(snapshot_target_line_ "$1" "$VDO_SNAPSHOT_LOOP" -merge)"
+ "$DMSETUP" suspend "$VDO_DM_SNAPSHOT_NAME" || {
+ error "ABORTING: Failed to initialize snapshot merge! Origin volume is unchanged."
+ }
+
+ verbose "Merging converted VDO volume..."
+ # Running merging
+ "$DMSETUP" resume "$VDO_DM_SNAPSHOT_NAME"
+
+ #du -h "$TEMPDIR/$VDO_DM_SNAPSHOT_NAME"
+
+ # Loop for a while, till the snapshot is merged.
+ # Should be nearly instantenious.
+ # FIXME: Recovery when something prevents merging is hard
+ for i in $(seq 1 20) ; do
+ status=( $("$DMSETUP" status "$VDO_DM_SNAPSHOT_NAME") )
+ # Check if merging is finished
+ test "${status[3]%/*}" = "${status[4]}" && break
+ # Wait a bit and retry
+ sleep .2
+ done
+ test "${status[3]%/*}" = "${status[4]}" || {
+ # FIXME: Now what shall we do ??? Help....
+ # Keep snapshot in table for possible analysis...
+ VDO_DM_SNAPSHOT_NAME=
+ VDO_SNAPSHOT_LOOP=
+ echo "Initial snapshot status ${initial_status[*]}"
+ echo "Failing merge snapshot status ${status[*]}"
+ error "ABORTING: Snapshot failed to merge! (Administrator required...)"
+ }
+ sync
+ "$DMSETUP" remove "$VDO_DM_SNAPSHOT_NAME" || {
+ sleep 1 # sleep and retry once more
+ "$DMSETUP" remove "$VDO_DM_SNAPSHOT_NAME" || {
+ error "ABORTING: Cannot remove snapshot $VDO_DM_SNAPSHOT_NAME! (check volume autoactivation...)"
+ }
+ }
+ VDO_DM_SNAPSHOT_NAME=
+ "$LOSETUP" -d "$VDO_SNAPSHOT_LOOP"
+ VDO_SNAPSHOT_LOOP=
+}
+
get_enabled_value_() {
case "$1" in
enabled) echo "1" ;;
@@ -221,46 +308,191 @@ parse_yaml_() {
) < "$yaml_file"
}
-# convert existing VDO volume into lvm2 volume
+#
+# Convert VDO volume on LV to VDOPool within this VG
+#
+# This conversion requires the size of VDO virtual volume has to be expressed in the VG's extent size.
+# Currently this enforces a user to reduce the VG extent size to the smaller size (up to 4KiB).
+#
+# TODO: We may eventually relax this condition just like we are doing rounding for convert_non_lv_()
+# Let's if there would be any singly user requiring this feauture.
+# It may allow to better use larger VDO volume size (in TiB ranges).
+#
+convert_lv_() {
+ local vdo_logicalSize=$1
+ local extent_size
+ local pvfree
+
+ pvfree=$("$LVM" lvs -o size --units b --nosuffix --noheadings "$DM_VG_NAME/$DM_LV_NAME")
+ pvfree=$(( pvfree / 1024 )) # to KiB
+ # select largest possible extent size that can exactly express both sizes
+ extent_size=$(get_largest_extent_size_ "$pvfree" "$vdo_logicalSize")
+
+ # validate existing VG extent_size can express virtual VDO size
+ vg_extent_size=$("$LVM" vgs -o vg_extent_size --units b --nosuffix --noheadings "$VGNAME")
+ vg_extent_size=$(( vg_extent_size / 1024 ))
+
+ test "$vg_extent_size" -le "$extent_size" || {
+ error "Please vgchange extent_size to at most $extent_size KiB or extend and align virtual size of VDO device on $vg_extent_size KiB before retrying conversion."
+ }
+ verbose "Renaming existing LV to be used as _vdata volume for VDO pool LV."
+ dry "$LVM" lvrename $YES $VERB "$VGNAME/$DM_LV_NAME" "$VGNAME/${LVNAME}_vpool" || {
+ error "Rename of LV \"$VGNAME/$DM_LV_NAME\" failed, while VDO header has been already moved!"
+ }
+
+ verbose "Converting to VDO pool."
+ dry "$LVM" lvconvert $YES $VERB $FORCE --config "$VDO_ALLOCATION_PARAMS" -Zn -V "${vdo_logicalSize}k" -n "$LVNAME" --type vdo-pool "$VGNAME/${LVNAME}_vpool"
+
+ verbose "Removing now unused VDO entry from VDO configuration."
+ dry "$VDO" remove $VDOCONF $VERB --force --name "$VDONAME"
+}
+
+#
+# Convert VDO volume on a device to VG with VDOPool LV
+#
+# Convert device with the use of snapshot on top of original VDO volume (can be optionally disabled)
+# Once the whole conversion is finished, snapshot is merged (During the short periof time of merging
+# user must ensure there will be no power-off!)
+#
+# For best use the latest version of vdoprepareforlvm tool is required.
+convert_non_lv_() {
+ local vdo_logicalSize=$1
+ local extent_size
+ local output
+ local pvfree
+
+ if [ "$USE_VDO_DM_SNAPSHOT" = "1" ]; then
+ dry snapshot_create_ "$DEVICE"
+ sed "s:$DEVICE:$VDO_DM_SNAPSHOT_DEVICE:" "$TEMPDIR/vdoconf.yml" > "$TEMPDIR/vdo_snap.yml"
+ # Let VDO manager operate on snapshot volume
+ VDOCONF="-f $TEMPDIR/vdo_snap.yml"
+ fi
+
+ verbose "Moving VDO header."
+ output=$(dry "$VDO" convert $VDOCONF --force --name "$VDONAME")
+
+ if [ "$ABORT_AFTER_VDO_CONVERT" != "0" ] ; then
+ verbose "Aborting VDO coversion after moving VDO, volume is useless!"
+ cleanup 0
+ fi
+
+ # Parse result from VDO preparation/conversion tool
+ # New version of the tool provides output with alingment and offset
+ local vdo_length=0
+ local vdo_aligned=0
+ local vdo_offset=0
+ local vdo_non_converted=0
+ while IFS= read -r line ; do
+ case "$line" in
+ "Non converted"*) vdo_non_converted=1 ;;
+ "Length"*) vdo_length=${line##* = } ;;
+ "Conversion completed"*)
+ vdo_aligned=${line##*aligned on }
+ vdo_aligned=${vdo_aligned%%[!0-9]*}
+ vdo_offset=${line##*offset }
+ # backward compatibility with report from older version
+ vdo_offset=${vdo_offset##*by }
+ vdo_offset=${vdo_offset%%[!0-9]*}
+ ;;
+ esac
+ done <<< "$output"
+
+ # In case we operation with snapshot, all lvm2 operation will also run on top of snapshot
+ local devices=${VDO_DM_SNAPSHOT_DEVICE:-$DEVICE}
+
+ dry "$LVM" pvcreate $YES --devices "$devices" --dataalignment "$vdo_offset"b "$devices" || {
+ error "Creation of PV on \"$DEVICE\" failed, while VDO header has been already moved!"
+ }
+
+ # Obtain free space in this new PV
+ # after 'vdo convert' call there is ~(1-2)M free space at the front of the device
+ pvfree=$("$BLOCKDEV" --getsize64 "$DEVICE")
+ pvfree=$(( ( pvfree - vdo_offset ) / 1024 )) # to KiB
+ if [ -n "$vdo_aligned" ] && [ "$vdo_aligned" != "0" ]; then
+ extent_size=$(( vdo_aligned / 1024 ))
+ else
+ extent_size=$(get_largest_extent_size_ "$pvfree" "$vdo_logicalSize")
+ fi
+
+ # Round virtual size to the LOWER size expressed in extent units.
+ # lvm is parsing VDO metadata and can read real full size and use it instead of this smaller value.
+ # To precisely byte-synchronize the size of VDO LV, user can lvresize such VDO LV later.
+ vdo_logicalSize=$(( ( vdo_logicalSize / extent_size ) * extent_size ))
+
+ verbose "Creating VG \"${NAME%/*}\" with extent size $extent_size KiB."
+ dry "$LVM" vgcreate $YES $VERB --devices "$devices" -s "${extent_size}k" "$VGNAME" "$devices" || {
+ error "Creation of VG \"$VGNAME\" failed, while VDO header has been already moved!"
+ }
+
+ verbose "Creating VDO pool data LV from all extents in volume group $VGNAME."
+ dry "$LVM" lvcreate -Zn -Wn -an $YES $VERB --devices "$devices" -l100%VG -n "${LVNAME}_vpool" "$VGNAME" "$devices"
+
+ verbose "Converting to VDO pool."
+ dry "$LVM" lvconvert $YES $VERB $FORCE --devices "$devices" --config "$VDO_ALLOCATION_PARAMS" -Zn -V "${vdo_logicalSize}k" -n "$LVNAME" --type vdo-pool "$VGNAME/${LVNAME}_vpool"
+
+ dry "$LVM" vgchange -an $VERB $FORCE --devices "$devices" "$VGNAME"
+
+ if [ "$USE_VDO_DM_SNAPSHOT" = "1" ]; then
+ if [ -z "$YES" ]; then
+ PROMPTING=yes
+ echo "Warning: Do not interrupt merging process once it starts (VDO data may become irrecoverable)!"
+ echo -n "Do you want to merge converted VDO device \"$DEVICE\" to VDO LV \"$VGNAME/$LVNAME\"? [y|N]: "
+ read -r -n 1 -s ANSWER
+ case "${ANSWER:0:1}" in
+ y|Y ) echo "Yes" ;;
+ * ) echo "No" ; PROMPTING=""; cleanup 1 ;;
+ esac
+ PROMPTING=""
+ YES="-y" # From now, now prompting
+ fi
+
+ dry snapshot_merge_ "$DEVICE"
+ if [ -e "$TEMPDIR/vdo_snap.yml" ]; then
+ dry cp "$TEMPDIR/vdo_snap.yml" "$VDO_CONFIG"
+ else
+ dry rm -f "$VDO_CONFIG"
+ fi
+ verbose "Merging of VDO device finished."
+ fi
+
+ dry "$LVM" lvchange -ay $VERB $FORCE "$VGNAME/$LVNAME"
+}
+
+# Convert existing VDO volume into lvm2 volume
convert2lvm_() {
- local DEVICE=$1
- local VGNAME=${NAME%/*}
- local LVNAME=${NAME#*/}
local VDONAME
local TRVDONAME
- local EXTENTSZ
- local IS_LV=1
local FOUND=""
local MAJOR=0
local MINOR=0
- local DM_VG_NAME
- local DM_LV_NAME
+ VGNAME=${NAME%/*}
+ LVNAME=${NAME#*/}
DM_UUID=""
detect_lv_ "$DEVICE"
case "$DM_UUID" in
LVM-*) eval "$("$DMSETUP" splitname --nameprefixes --noheadings --separator ' ' "$DM_NAME")"
if [ -z "$VGNAME" ] || [ "$VGNAME" = "$LVNAME" ] ; then
VGNAME=$DM_VG_NAME
- verbose "Using existing volume group name $VGNAME."
+ verbose "Using existing volume group name \"$VGNAME\"."
test -n "$LVNAME" || LVNAME=$DM_LV_NAME
- elif test "$VGNAME" != "$DM_VG_NAME" ; then
+ elif [ "$VGNAME" != "$DM_VG_NAME" ]; then
error "Volume group name \"$VGNAME\" does not match name \"$DM_VG_NAME\" for VDO device \"$DEVICE\"."
fi
;;
- *) IS_LV=0
+ *)
# Check if we need to generate unused $VGNANE
if [ -z "$VGNAME" ] || [ "$VGNAME" = "$LVNAME" ] ; then
VGNAME=${DEFAULT_NAME%/*}
# Find largest matching VG name to our 'default' vgname
- LASTVGNAME=$(LC_ALL=C "$LVM" vgs -oname -O-name --noheadings -S name=~${VGNAME} | grep -E "${VGNAME}[0-9]? ?" | head -1 || true)
- if test -n "$LASTVGNAME" ; then
+ LASTVGNAME=$(LC_ALL=C "$LVM" vgs -oname -O-name --noheadings -S name=~"${VGNAME}" | grep -E "${VGNAME}[0-9]? ?" | head -1 || true)
+ if [ -n "$LASTVGNAME" ]; then
LASTVGNAME=${LASTVGNAME#*"${VGNAME}"}
# If the number is becoming too high, try some random number
test "$LASTVGNAME" -gt 99999999 2>/dev/null && LASTVGNAME=$RANDOM
# Generate new unused VG name
VGNAME="${VGNAME}$(( LASTVGNAME + 1 ))"
- verbose "Selected unused volume group name $VGNAME."
+ verbose "Selected unused volume group name \"$VGNAME\"."
fi
fi
# New VG is created, LV name should be always unused.
@@ -269,13 +501,14 @@ convert2lvm_() {
;;
esac
- verbose "Checked whether device $1 is already LV ($IS_LV)."
+ verbose "Checked whether device \"$DEVICE\" is already logical volume."
"$MKDIR" -p -m 0000 "$TEMPDIR" || error "Failed to create $TEMPDIR."
# TODO: might use directly /etc/vdoconf.yml (avoding need of 'vdo' manager)
verbose "Getting YAML VDO configuration."
"$VDO" printConfigFile $VDOCONF >"$TEMPDIR/vdoconf.yml"
+ test -s "$TEMPDIR/vdoconf.yml" || error "Cannot work without VDO configuration"
# Check list of devices in VDO configure file for their major:minor
# and match with given $DEVICE devmajor:devminor
@@ -290,8 +523,8 @@ convert2lvm_() {
}
done
- test -n "$FOUND" || error "Can't find matching device in vdo configuration file."
- verbose "Found matching device $FOUND $MAJOR:$MINOR"
+ test -n "$FOUND" || error "Can't find matching device in VDO configuration file."
+ verbose "Found matching device $FOUND $MAJOR:$MINOR."
VDONAME=$(awk -v DNAME="$FOUND" '/.*VDOService$/ {VNAME=substr($1, 0, length($1) - 1)} /[[:space:]]*device:/ { if ($2 ~ DNAME) {print VNAME}}' "$TEMPDIR/vdoconf.yml")
TRVDONAME=$(echo "$VDONAME" | tr '-' '_')
@@ -313,7 +546,7 @@ convert2lvm_() {
verbose "Converted VDO device has logical/physical size $vdo_logicalSize/$vdo_physicalSize KiB."
- PARAMS=$(cat <<EOF
+ VDO_ALLOCATION_PARAMS=$(cat <<EOF
allocation {
vdo_use_compression = $(get_enabled_value_ "$vdo_compression")
vdo_use_deduplication = $(get_enabled_value_ "$vdo_deduplication")
@@ -338,80 +571,31 @@ allocation {
}
EOF
)
- verbose "VDO conversion paramaters: $PARAMS"
+ verbose "VDO conversion parameters: $VDO_ALLOCATION_PARAMS"
+
+ verbose "Stopping VDO volume."
+ dry "$VDO" stop $VDOCONF --name "$VDONAME"
# If user has not provided '--yes', prompt before conversion
- if test -z "$YES" ; then
+ if [ -z "$YES" ] && [ "$USE_VDO_DM_SNAPSHOT" != "1" ]; then
PROMPTING=yes
echo -n "Convert VDO device \"$DEVICE\" to VDO LV \"$VGNAME/$LVNAME\"? [y|N]: "
- read -n 1 -s ANSWER
+ read -r -n 1 -s ANSWER
case "${ANSWER:0:1}" in
- y|Y ) echo "Yes" ;;
- * ) echo "No" ; PROMPTING=""; exit 1 ;;
+ y|Y ) echo "Yes" ;;
+ * ) echo "No" ; PROMPTING=""; cleanup 1 ;;
esac
PROMPTING=""
- YES="-y" # From now, now prompting
+ YES="-y" # From now, no prompting
fi
- verbose "Stopping VDO volume."
- dry "$VDO" stop $VDOCONF --name "$VDONAME"
-
- if [ "$IS_LV" = "0" ]; then
- verbose "Moving VDO header by 2MiB."
- dry "$VDO" convert $VDOCONF --force --name "$VDONAME"
+ # Make a backup of the existing VDO yaml configuration file
+ test -e "$VDO_CONFIG" && dry cp -a "$VDO_CONFIG" "${VDO_CONFIG}.backup"
- dry "$LVM" pvcreate $YES --dataalignment 2M "$DEVICE" || {
- error "Creation of PV on \"$DEVICE\" failed, while VDO header has been already moved!"
- }
-
- # Obtain free space in this new PV
- # after 'vdo convert' call there is +2M free space at the front of the device
- case "$DRY" in
- 0) pvfree=$("$LVM" pvs -o devsize --units b --nosuffix --noheadings "$DEVICE") ;;
- *) pvfree=$("$BLOCKDEV" --getsize64 "$DEVICE") ;;
- esac
-
- pvfree=$(( pvfree / 1024 - 2048 )) # to KiB
- else
- pvfree=$("$LVM" lvs -o size --units b --nosuffix --noheadings "$DM_VG_NAME/$DM_LV_NAME")
- pvfree=$(( pvfree / 1024 )) # to KiB
- fi
-
- # select largest possible extent size that can exactly express both sizes
- EXTENTSZ=$(get_largest_extent_size_ "$pvfree" "$vdo_logicalSize")
-
- if [ "$IS_LV" = "0" ]; then
- verbose "Creating VG \"${NAME%/*}\" with extent size $EXTENTSZ KiB."
- dry "$LVM" vgcreate $YES $VERB -s "${EXTENTSZ}k" "$VGNAME" "$DEVICE" || {
- error "Creation of VG \"$VGNAME\" failed, while VDO header has been already moved!"
- }
-
- verbose "Creating VDO pool data LV from all extents in volume group $VGNAME."
- dry "$LVM" lvcreate -Zn -Wn $YES $VERB -l100%VG -n "${LVNAME}_vpool" "$VGNAME"
- else
- # validate existing VG extent_size can express virtual VDO size
- vg_extent_size=$("$LVM" vgs -o vg_extent_size --units b --nosuffix --noheadings "$VGNAME" || true)
- vg_extent_size=$(( vg_extent_size / 1024 ))
-
- test "$vg_extent_size" -le "$EXTENTSZ" || {
- error "Please vgchange extent_size to at most $EXTENTSZ KiB or extend and align virtual size of VDO device on $vg_extent_size KiB."
- }
- verbose "Renaming existing LV to be used as _vdata volume for VDO pool LV."
- dry "$LVM" lvrename $YES $VERB "$VGNAME/$DM_LV_NAME" "$VGNAME/${LVNAME}_vpool" || {
- error "Rename of LV \"$VGNAME/$DM_LV_NAME\" failed, while VDO header has been already moved!"
- }
- fi
-
- verbose "Converting to VDO pool."
- dry "$LVM" lvconvert $YES $VERB $FORCE --config "$PARAMS" -Zn -V "${vdo_logicalSize}k" -n "$LVNAME" --type vdo-pool "$VGNAME/${LVNAME}_vpool"
-
- # Note: that this is spelled OPPOSITE the other $IS_LV checks.
- if [ "$IS_LV" = "1" ]; then
- verbose "Removing now-unused VDO entry from VDO config."
- dry "$VDO" remove $VDOCONF $VERB --force --name "$VDONAME"
- fi
-
- rm -fr "$TEMPDIR"
+ case "$DM_UUID" in
+ LVM-*) convert_lv_ "$vdo_logicalSize" ;;
+ *) convert_non_lv_ "$vdo_logicalSize" ;;
+ esac
}
#############################
@@ -431,14 +615,19 @@ do
"-n"|"--name" ) shift; NAME=$1 ;;
"-v"|"--verbose") VERB="-v" ;;
"-y"|"--yes" ) YES="-y" ;;
+ "--abort-after-vdo-convert" ) ABORT_AFTER_VDO_CONVERT=1; USE_VDO_DM_SNAPSHOT=0 ;; # For testing only
"--dry-run" ) DRY="1" ; VERB="-v" ;;
+ "--no-snapshot" ) USE_VDO_DM_SNAPSHOT=0 ;;
+ "--uuid-prefix" ) shift; DM_UUID_PREFIX=$1 ;; # For testing only
+ "--vdo-config" ) shift; VDO_CONFIG=$1 ; VDOCONF="-f $VDO_CONFIG" ;;
"-*") error "Wrong argument \"$1\". (see: $TOOL --help)" ;;
- *) DEVICENAME=$1 ;; # device name does not start with '-'
+ *) DEVICE=$1 ;; # device name does not start with '-'
esac
shift
done
-test -n "$DEVICENAME" || error "Device name is not specified. (see: $TOOL --help)"
+test -n "$DEVICE" || error "Device name is not specified. (see: $TOOL --help)"
+
+convert2lvm_
-# do conversion
-convert2lvm_ "$DEVICENAME"
+cleanup 0
--
2.41.0
Reference in New Issue View Git Blame Copy Permalink