rpms/libguestfs
7
0
Fork 0
Code Issues Pull Requests Releases Activity
0d102d6b35
libguestfs/SOURCES/0042-v2v-Copy-static-IP-address-information-over-for-Wind.patch

424 lines
16 KiB
Diff
Raw Normal View History

import libguestfs-1.40.2-27.module+el8.4.0+9282+0bdec052
2021-05-18 06:51:15 +00:00
From 77606e831f8891b65350effb6502d233d74f8cfc Mon Sep 17 00:00:00 2001
import libguestfs-1.40.2-25.module+el8.3.0+7421+642fe24f
2020-11-03 11:58:07 +00:00
From: "Richard W.M. Jones" <rjones@redhat.com>
Date: Tue, 4 Dec 2018 16:09:42 +0000
Subject: [PATCH] v2v: Copy static IP address information over for Windows
guests (RHBZ#1626503).
For Linux the guest itself remembers the IP address associated with
each MAC address. Thus it doesn't matter if the interface type
changes (ie. to virtio-net), because as long as we preserve the MAC
address the guest will use the same IP address or the same DHCP
configuration.
However on Windows this association is not maintained by MAC address.
In fact the MAC address isn't saved anywhere in the guest registry.
(It seems instead this is likely done through PCI device type and
address which we don't record at the moment and is almost impossible
to preserve.) When a guest which doesn't use DHCP is migrated, the
guest sees the brand new virtio-net devices and doesn't know what to
do with them, and meanwhile the right static IPs are still associated
with the old and now-defunct interfaces in the registry.
We cannot collect the required information from within the guest.
However we can collect it outside the tool by some other means
(eg. using VMware Tools APIs) and present this information to virt-v2v
which then writes it into the Windows guest at firstboot time.
This commit adds the --mac ..:ip:.. sub-option which creates a
Powershell script to set network adapters at firstboot. An option
such as:
--mac 00:0c:29:e6:3d:9d:ip:192.168.0.89,192.168.0.1,24,192.168.0.254
approximately turns into this script:
# Wait for the netkvm (virtio-net) driver to become active.
$adapters = @()
While (-Not $adapters) {
Start-Sleep -Seconds 5
$adapters = Get-NetAdapter -Physical |
Where DriverFileName -eq "netkvm.sys"
}
$mac_address = '00-0c-29-e6-3d-9d'
$ifindex = (Get-NetAdapter -Physical |
Where MacAddress -eq $mac_address).ifIndex
if ($ifindex) {
New-NetIPAddress -InterfaceIndex $ifindex
-IPAddress '192.168.0.89'
-DefaultGateway '192.168.0.1'
-PrefixLength 24
Set-DnsClientServerAddress -InterfaceIndex $ifindex
-ServerAddresses ('192.168.0.254')
}
Thanks: Brett Thurber for diagnosing the problem and suggesting paths
towards a fix.
(cherry picked from commit dfd9fac7435cf2f9293961b6cc1fe316af4feebc)
---
v2v/cmdline.ml | 41 ++++++++++++++++++-----
v2v/cmdline.mli | 1 +
v2v/convert_linux.ml | 2 +-
v2v/convert_windows.ml | 76 +++++++++++++++++++++++++++++++++++++++++-
v2v/modules_list.ml | 2 +-
v2v/modules_list.mli | 2 +-
v2v/types.ml | 8 +++++
v2v/types.mli | 9 +++++
v2v/v2v.ml | 7 ++--
v2v/virt-v2v.pod | 18 ++++++++++
10 files changed, 150 insertions(+), 16 deletions(-)
diff --git a/v2v/cmdline.ml b/v2v/cmdline.ml
index 4d390f249..686631271 100644
--- a/v2v/cmdline.ml
+++ b/v2v/cmdline.ml
@@ -40,11 +40,12 @@ type cmdline = {
print_estimate : bool;
print_source : bool;
root_choice : root_choice;
+ static_ips : static_ip list;
ks : Tools_utils.key_store;
}
(* Matches --mac command line parameters. *)
-let mac_re = PCRE.compile ~anchored:true "([[:xdigit:]]{2}:[[:xdigit:]]{2}:[[:xdigit:]]{2}:[[:xdigit:]]{2}:[[:xdigit:]]{2}:[[:xdigit:]]{2}):(network|bridge):(.*)"
+let mac_re = PCRE.compile ~anchored:true "([[:xdigit:]]{2}:[[:xdigit:]]{2}:[[:xdigit:]]{2}:[[:xdigit:]]{2}:[[:xdigit:]]{2}:[[:xdigit:]]{2}):(network|bridge|ip):(.*)"
let parse_cmdline () =
let compressed = ref false in
@@ -97,6 +98,7 @@ let parse_cmdline () =
in
let network_map = Networks.create () in
+ let static_ips = ref [] in
let add_network str =
match String.split ":" str with
| "", "" ->
@@ -119,11 +121,30 @@ let parse_cmdline () =
if not (PCRE.matches mac_re str) then
error (f_"cannot parse --mac \"%s\" parameter") str;
let mac = PCRE.sub 1 and out = PCRE.sub 3 in
- let vnet_type =
- match PCRE.sub 2 with
- | "network" -> Network | "bridge" -> Bridge
- | _ -> assert false in
- Networks.add_mac network_map mac vnet_type out
+ match PCRE.sub 2 with
+ | "network" ->
+ Networks.add_mac network_map mac Network out
+ | "bridge" ->
+ Networks.add_mac network_map mac Bridge out
+ | "ip" ->
+ let add if_mac_addr if_ip_address if_default_gateway
+ if_prefix_length if_nameservers =
+ List.push_back static_ips
+ { if_mac_addr; if_ip_address; if_default_gateway;
+ if_prefix_length; if_nameservers }
+ in
+ (match String.nsplit "," out with
+ | [] ->
+ error (f_"invalid --mac ip option")
+ | [ip] -> add mac ip None None []
+ | [ip; gw] -> add mac ip (Some gw) None []
+ | ip :: gw :: len :: nameservers ->
+ let len =
+ try int_of_string len with
+ | Failure _ -> error (f_"cannot parse --mac ip prefix length field as an integer: %s") len in
+ add mac ip (Some gw) (Some len) nameservers
+ );
+ | _ -> assert false
in
let no_trim_warning _ =
@@ -211,8 +232,8 @@ let parse_cmdline () =
s_"Input transport";
[ L"in-place" ], Getopt.Set in_place,
s_"Only tune the guest in the input VM";
- [ L"mac" ], Getopt.String ("mac:network|bridge:out", add_mac),
- s_"Map NIC to network or bridge";
+ [ L"mac" ], Getopt.String ("mac:network|bridge|ip:out", add_mac),
+ s_"Map NIC to network or bridge or assign static IP";
[ S 'n'; L"network" ], Getopt.String ("in:out", add_network),
s_"Map network ‘in’ to ‘out’";
[ L"no-copy" ], Getopt.Clear do_copy,
@@ -335,6 +356,7 @@ read the man page virt-v2v(1).
let print_source = !print_source in
let qemu_boot = !qemu_boot in
let root_choice = !root_choice in
+ let static_ips = !static_ips in
(* No arguments and machine-readable mode? Print out some facts
* about what this binary supports.
@@ -351,6 +373,7 @@ read the man page virt-v2v(1).
pr "in-place\n";
pr "io/oo\n";
pr "mac-option\n";
+ pr "mac-ip-option\n";
List.iter (pr "input:%s\n") (Modules_list.input_modules ());
List.iter (pr "output:%s\n") (Modules_list.output_modules ());
List.iter (pr "convert:%s\n") (Modules_list.convert_modules ());
@@ -685,7 +708,7 @@ read the man page virt-v2v(1).
{
compressed; debug_overlays; do_copy; in_place; network_map;
output_alloc; output_format; output_name;
- print_estimate; print_source; root_choice;
+ print_estimate; print_source; root_choice; static_ips;
ks = opthandle.ks;
},
input, output
diff --git a/v2v/cmdline.mli b/v2v/cmdline.mli
index 78601e191..a009e9888 100644
--- a/v2v/cmdline.mli
+++ b/v2v/cmdline.mli
@@ -30,6 +30,7 @@ type cmdline = {
print_estimate : bool;
print_source : bool;
root_choice : Types.root_choice;
+ static_ips : Types.static_ip list;
ks : Tools_utils.key_store;
}
diff --git a/v2v/convert_linux.ml b/v2v/convert_linux.ml
index f9e811c8d..1ada36115 100644
--- a/v2v/convert_linux.ml
+++ b/v2v/convert_linux.ml
@@ -34,7 +34,7 @@ open Linux_kernels
module G = Guestfs
(* The conversion function. *)
-let convert (g : G.guestfs) inspect source output rcaps =
+let convert (g : G.guestfs) inspect source output rcaps _ =
(*----------------------------------------------------------------------*)
(* Inspect the guest first. We already did some basic inspection in
* the common v2v.ml code, but that has to deal with generic guests
diff --git a/v2v/convert_windows.ml b/v2v/convert_windows.ml
index 1db3c0ea6..75e609d61 100644
--- a/v2v/convert_windows.ml
+++ b/v2v/convert_windows.ml
@@ -38,7 +38,7 @@ module G = Guestfs
* time the Windows VM is booted on KVM.
*)
-let convert (g : G.guestfs) inspect source output rcaps =
+let convert (g : G.guestfs) inspect source output rcaps static_ips =
(*----------------------------------------------------------------------*)
(* Inspect the Windows guest. *)
@@ -228,6 +228,8 @@ let convert (g : G.guestfs) inspect source output rcaps =
Registry.with_hive_write g inspect.i_windows_software_hive
update_software_hive;
+ configure_network_interfaces net_driver;
+
fix_ntfs_heads ();
fix_win_esp ();
@@ -603,6 +605,78 @@ if errorlevel 3010 exit /b 0
| None ->
warning (f_"could not find registry key HKLM\\SOFTWARE\\Microsoft\\Windows\\CurrentVersion")
+ and configure_network_interfaces net_driver =
+ (* If we were asked to force network interfaces to have particular
+ * static IP addresses then it is done here by installing a
+ * Powershell script which runs at boot.
+ *)
+ if static_ips <> [] then (
+ let psh_filename = "v2vnetcf.ps1" in
+ let psh = ref [] in
+ let add = List.push_back psh in
+
+ add "# Uncomment this line for lots of debug output.";
+ add "# Set-PSDebug -Trace 1";
+ add "";
+
+ (* If virtio-net was added to the registry, we must wait for
+ * it to be installed at runtime.
+ *)
+ if net_driver = Virtio_net then (
+ add "# Wait for the netkvm (virtio-net) driver to become active.";
+ add "$adapters = @()";
+ add "While (-Not $adapters) {";
+ add " Start-Sleep -Seconds 5";
+ add " $adapters = Get-NetAdapter -Physical | Where DriverFileName -eq \"netkvm.sys\"";
+ add " Write-Host \"adapters = '$adapters'\"";
+ add "}";
+ add ""
+ );
+
+ List.iter (
+ fun { if_mac_addr; if_ip_address; if_default_gateway;
+ if_prefix_length; if_nameservers } ->
+ add (sprintf "$mac_address = '%s'"
+ (String.replace if_mac_addr ":" "-"));
+ add "$ifindex = (Get-NetAdapter -Physical | Where MacAddress -eq $mac_address).ifIndex";
+ add "if ($ifindex) {";
+
+ add " Write-Host \"setting IP address of adapter at $ifindex\"";
+
+ (* New-NetIPAddress command *)
+ let args = ref [] in
+ List.push_back args "-InterfaceIndex";
+ List.push_back args "$ifindex";
+ List.push_back args "-IPAddress";
+ List.push_back args (sprintf "'%s'" if_ip_address);
+ (match if_default_gateway with
+ | None -> ()
+ | Some gw ->
+ List.push_back args "-DefaultGateway";
+ List.push_back args (sprintf "'%s'" gw)
+ );
+ (match if_prefix_length with
+ | None -> ()
+ | Some len ->
+ List.push_back args "-PrefixLength";
+ List.push_back args (string_of_int len)
+ );
+ let cmd1 = "New-NetIPAddress " ^ String.concat " " !args in
+ add (" " ^ cmd1);
+
+ (* Set-DnsClientServerAddress command *)
+ if if_nameservers <> [] then (
+ add (sprintf " Set-DnsClientServerAddress -InterfaceIndex $ifindex -ServerAddresses (%s)"
+ (String.concat "," (List.map (sprintf "'%s'") if_nameservers)))
+ );
+ add "}";
+ add ""
+ ) static_ips;
+
+ (* Install the Powershell script to run at firstboot. *)
+ Windows.install_firstboot_powershell g inspect psh_filename !psh
+ ) (* static_ips <> [] *)
+
and fix_ntfs_heads () =
(* NTFS hardcodes the number of heads on the drive which created
it in the filesystem header. Modern versions of Windows
diff --git a/v2v/modules_list.ml b/v2v/modules_list.ml
index a0a74aaf2..76b3def5d 100644
--- a/v2v/modules_list.ml
+++ b/v2v/modules_list.ml
@@ -38,7 +38,7 @@ type inspection_fn = Types.inspect -> bool
type conversion_fn =
Guestfs.guestfs -> Types.inspect -> Types.source -> Types.output_settings ->
- Types.requested_guestcaps -> Types.guestcaps
+ Types.requested_guestcaps -> Types.static_ip list -> Types.guestcaps
let convert_modules = ref []
diff --git a/v2v/modules_list.mli b/v2v/modules_list.mli
index 3e80d3e23..ad2024755 100644
--- a/v2v/modules_list.mli
+++ b/v2v/modules_list.mli
@@ -34,7 +34,7 @@ type inspection_fn = Types.inspect -> bool
type conversion_fn =
Guestfs.guestfs -> Types.inspect -> Types.source -> Types.output_settings ->
- Types.requested_guestcaps -> Types.guestcaps
+ Types.requested_guestcaps -> Types.static_ip list -> Types.guestcaps
val register_convert_module : inspection_fn -> string -> conversion_fn -> unit
(** [register_convert_module inspect_fn name fn] registers a
diff --git a/v2v/types.ml b/v2v/types.ml
index 714b30014..4ba6117fd 100644
--- a/v2v/types.ml
+++ b/v2v/types.ml
@@ -506,6 +506,14 @@ type root_choice = AskRoot | SingleRoot | FirstRoot | RootDev of string
type output_allocation = Sparse | Preallocated
+type static_ip = {
+ if_mac_addr : string;
+ if_ip_address : string;
+ if_default_gateway : string option;
+ if_prefix_length : int option;
+ if_nameservers : string list;
+}
+
class virtual input = object
method precheck () = ()
method virtual as_options : string
diff --git a/v2v/types.mli b/v2v/types.mli
index f595ab0ef..528d77965 100644
--- a/v2v/types.mli
+++ b/v2v/types.mli
@@ -361,6 +361,15 @@ type root_choice = AskRoot | SingleRoot | FirstRoot | RootDev of string
type output_allocation = Sparse | Preallocated
(** Type of [-oa] (output allocation) option. *)
+type static_ip = {
+ if_mac_addr : string;
+ if_ip_address : string;
+ if_default_gateway : string option;
+ if_prefix_length : int option;
+ if_nameservers : string list;
+}
+(** [--mac ..:ip:..] option. *)
+
(** {2 Input object}
This is subclassed for the various input [-i] options.
diff --git a/v2v/v2v.ml b/v2v/v2v.ml
index 63e809030..d7a868659 100644
--- a/v2v/v2v.ml
+++ b/v2v/v2v.ml
@@ -133,7 +133,7 @@ let rec main () =
| In_place ->
rcaps_from_source source in
- do_convert g inspect source output rcaps in
+ do_convert g inspect source output rcaps cmdline.static_ips in
g#umount_all ();
@@ -556,7 +556,7 @@ and estimate_target_size mpstats overlays =
)
(* Conversion. *)
-and do_convert g inspect source output rcaps =
+and do_convert g inspect source output rcaps interfaces =
(match inspect.i_product_name with
| "unknown" ->
message (f_"Converting the guest to run on KVM")
@@ -572,7 +572,8 @@ and do_convert g inspect source output rcaps =
debug "picked conversion module %s" conversion_name;
debug "requested caps: %s" (string_of_requested_guestcaps rcaps);
let guestcaps =
- convert g inspect source (output :> Types.output_settings) rcaps in
+ convert g inspect source (output :> Types.output_settings) rcaps
+ interfaces in
debug "%s" (string_of_guestcaps guestcaps);
(* Did we manage to install virtio drivers? *)
diff --git a/v2v/virt-v2v.pod b/v2v/virt-v2v.pod
index 9a555c3be..0642d158f 100644
--- a/v2v/virt-v2v.pod
+++ b/v2v/virt-v2v.pod
@@ -368,6 +368,24 @@ Map source NIC MAC address to a network or bridge.
See L</Networks and bridges> below.
+=item B<--mac> aa:bb:cc:dd:ee:ffB<:ip:>ipaddr[,gw[,len[,ns,ns,...]]]
+
+Force a particular interface (controlled by its MAC address) to have a
+static IP address after boot.
+
+The fields in the parameter are: C<ipaddr> is the IP address. C<gw>
+is the optional gateway IP address. C<len> is the subnet mask length
+(an integer). The final parameters are zero or more nameserver IP
+addresses.
+
+This option can be supplied zero or more times.
+
+You only need to use this option for certain broken guests such as
+Windows which are unable to preserve MAC to static IP address mappings
+automatically. You don't need to use it if Windows is using DHCP. It
+is currently ignored for Linux guests since they do not have this
+problem.
+
=item B<--machine-readable>
=item B<--machine-readable>=format
--
import libguestfs-1.40.2-27.module+el8.4.0+9282+0bdec052
2021-05-18 06:51:15 +00:00
2.18.4
import libguestfs-1.40.2-25.module+el8.3.0+7421+642fe24f
2020-11-03 11:58:07 +00:00
Reference in New Issue Copy Permalink