rpms/kexec-tools
7
0
Fork 0
Code Issues Pull Requests Releases Activity
Unnamed repository
1,161 Commits 9 Branches 62 Tags 6.3 MiB
Shell 91.1%
Roff 8.9%
ca01cbdfd5
Go to file
Kairui Song ca01cbdfd5 mkdumprd: generate usable kdump initramfs even target is not mounted 
Currently kexec-tools always depend on dump target to be mounted, which
caused some inconvenience for setup.

So for user configured target, allow kdump to start and build initramfs
even if target is not mounted.

When a mounted user configured target is used, the behavior is not
changed.

When a unmounted user configured target is used, mkdumprd will look for
corresponding mount info in fstab, and a entry with noauto option is
founded, mkdumprd will try to mount it inplace with optoins specified
in fstab and do basic checks on the device, then umount it.

If there is no fstab entry, mkdumprd will try to mount it in temporary
path with defaults option, do same basic check and umount it.

If there is a fstab entry but "noauto" option is not used, then there
must be some reason that the target device is not mounted, mkdumprd will
error out.

When path based target is used, there is no behavior change.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2020-05-22 16:14:07 +08:00
.gitignore .gitignore: Update to make it more generic 2016-05-16 10:15:01 +08:00
98-kexec.rules Make udev reload rules quiet during bootup 2018-12-06 17:44:03 +08:00
98-kexec.rules.ppc64 kexec.rules: create dedicated udev rules for ppc64 2019-05-06 16:22:28 +08:00
dracut-early-kdump-module-setup.sh earlykdump: warn when installed kernel version differs from dracut target 2019-01-10 18:16:58 +08:00
dracut-early-kdump.sh kdump-lib: switch to the kexec_file_load() syscall on x86_64 by default 2020-02-06 21:57:14 +08:00
dracut-kdump-capture.service dracut-kdump-capture.service: Use OnFailureJobMode instead of deprecated OnFailureIsolate 2019-06-14 09:44:09 +08:00
dracut-kdump-emergency.service kdump-emergency: fix "Transaction is destructive" emergency failure 2017-03-31 11:54:30 +08:00
dracut-kdump-emergency.target kdump-emergency: fix "Transaction is destructive" emergency failure 2017-03-31 11:54:30 +08:00
dracut-kdump-error-handler.service kdump-error-handler.service: Remove ExecStopPost 2019-11-28 17:46:00 +08:00
dracut-kdump-error-handler.sh Add failure_action as alias of default and make default obsolete 2019-01-22 17:57:53 +08:00
dracut-kdump-wait-for-target.sh Add a hook to wait for kdump target in initqueue 2020-01-29 08:12:45 +08:00
dracut-kdump.sh powerpc: enable the scripts to capture dump on POWERNV platform 2020-02-06 22:13:06 +08:00
dracut-module-setup.sh Add a new option 'rd.znet_ifname' in order to use it in udev rules 2020-04-27 18:21:22 +08:00
dracut-monitor_dd_progress monitor-dd-progress fix 2013-06-25 16:45:59 +08:00
early-kdump-howto.txt Improves the early-kdump-howto.txt document in several points: 2020-03-12 23:31:34 +08:00
fadump-howto.txt fadump: update fadump-howto.txt with some troubleshooting help 2020-05-11 14:08:14 +08:00
kdump-dep-generator.sh kdump-dep-generator: Add kdump service dependencies on the fly 2014-04-17 11:27:31 +08:00
kdump-in-cluster-environment.txt Add fence_kdump support for generic clusters 2014-04-03 14:43:06 +08:00
kdump-lib-initramfs.sh User get_mount_info to replace findmnt calls 2020-05-22 16:14:02 +08:00
kdump-lib.sh mkdumprd: generate usable kdump initramfs even target is not mounted 2020-05-22 16:14:07 +08:00
kdump-udev-throttler Make udev reload rules quiet during bootup 2018-12-06 17:44:03 +08:00
kdump.conf Add final_action option to kdump.conf 2019-01-22 17:58:24 +08:00
kdump.conf.5 Add final_action option to kdump.conf 2019-01-22 17:58:24 +08:00
kdump.service kdumpctl: Add reload support 2018-11-01 22:31:20 +08:00
kdump.sysconfig Disable device dump by default 2019-09-02 17:06:09 +08:00
kdump.sysconfig.aarch64 Disable device dump by default 2019-09-02 17:06:09 +08:00
kdump.sysconfig.i386 Disable device dump by default 2019-09-02 17:06:09 +08:00
kdump.sysconfig.ppc64 Disable device dump by default 2019-09-02 17:06:09 +08:00
kdump.sysconfig.ppc64le Disable device dump by default 2019-09-02 17:06:09 +08:00
kdump.sysconfig.s390x Disable device dump by default 2019-09-02 17:06:09 +08:00
kdump.sysconfig.x86_64 kdump-lib: switch to the kexec_file_load() syscall on x86_64 by default 2020-02-06 21:57:14 +08:00
kdumpctl User get_mount_info to replace findmnt calls 2020-05-22 16:14:02 +08:00
kdumpctl.8 Update man page for new kdumpctl command: reload / rebuild 2019-04-05 02:02:58 +08:00
kexec-kdump-howto.txt kexec-kdump-howto.txt: Add notes about device dump 2019-09-02 17:06:16 +08:00
kexec-tools-2.0.20-eppic-Remove-duplicated-variable-declaration.patch Fix builing failure on Fedora 32 2020-01-29 14:43:47 +08:00
kexec-tools-2.0.20-fix-broken-multiboot2-buliding-for-i386.patch x86: Fix broken multiboot2 buliding for i386 2019-08-02 11:24:03 +08:00
kexec-tools-2.0.20-makedumpfile-Introduce-check-params-option.patch makedumpfile: Introduce --check-params option 2020-03-12 23:32:18 +08:00
kexec-tools-2.0.20-makedumpfile-Remove-duplicated-variable-declarations.patch Fix builing failure on Fedora 32 2020-01-29 14:43:47 +08:00
kexec-tools-2.0.20-Remove-duplicated-variable-declarations.patch Fix builing failure on Fedora 32 2020-01-29 14:43:47 +08:00
kexec-tools.spec Release 2.0.20-12 2020-04-02 01:48:46 +08:00
live-image-kdump-howto.txt Revert "kdumpctl: filter 'root' kernel parameter when running in live images" 2017-04-11 16:03:12 +08:00
mkdumprd mkdumprd: generate usable kdump initramfs even target is not mounted 2020-05-22 16:14:07 +08:00
mkdumprd.8 Remove comma which is redundant 2013-02-16 15:19:41 +08:00
README README: Add a README file 2014-04-02 10:45:36 +08:00
sources Update makedumpfile to 1.6.7 2020-01-29 08:47:42 +08:00
zanata-notes.txt Add a notes for zanata process 2012-12-05 01:23:09 -05:00

README 

Adding a patch to kexec-tools
=============================
There is a mailing list kexec@lists.fedoraproject.org where all the dicussion
related to fedora kexec-tools happen. All the patches are posted there for
inclusion and committed to kexec-tools after review.

So if you want your patches to be included in fedora kexec-tools package,
post these to kexec@lists.fedoraproject.org.

One can subscribe to list and browse through archives here.

https://admin.fedoraproject.org/mailman/listinfo/kexec