Unnamed repository
Go to file
Baoquan He 4841bc6a6d kdump-lib.sh: add extra 64M to default crashkernel if sme/sev is active
It's reported that kdump kernel failed to boot and can't dump vmcore
when crashkernel=192M and SME/SEV is active.

This is because swiotlb will be enabled and reserves 64M memory by
default on system with SME/SEV enabled. Then kdump kernel will be out of
memory after taking 64M away for swiotlb init.

So here add extra 64M memory to default crashkernel value so that kdump
kernel can function well as before. When doing that, search journalctl
for the "Memory Encryption Features active: AMD" to check if SME or SEV
is active. This line of log is printed out in kernel function as below
and the type SME is mutual exclusive with type SEV.
  ***:
  arch/x86/mm/mem_encrypt.c:print_mem_encrypt_feature_info()

Note:
1) The conditional check is relying on journalctl log because I didn't
   find available system interface to check if SEV is active. Even
   though we can check if SME is active via /proc/cpuinfo. For
   consistency, I take the same check for both SME and SEV by searching
   journalctl.

2) The conditional check is relying on journalctl log, means it won't
   work for crashkernel setting in anoconda because the installation
   kernel doesn't have the SME/SEV setting. So customer need manually
   run 'kdumpctl reset-crashkernel' to reset crashkernel to add the
   extra 64M after OS installation.

3) We need watch the line of log printing in
   print_mem_encrypt_feature_info() in kernel just in case people may
   change it in the future.

Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
2023-11-08 09:42:31 +08:00
spec Allow _crashkernel_add to address larger memory ranges 2023-11-08 09:42:31 +08:00
tests tests: use the default crashkernel value 2023-06-20 10:24:25 +08:00
.editorconfig dracut-early-kdump: explicitly use bash 2023-01-30 17:37:23 +08:00
.gitignore unit tests: prepare for kdumpctl and kdump-lib.sh to be unit-tested 2022-04-14 11:44:12 +08:00
.packit.yaml [packit] 2.0.27 upstream release 2023-08-31 11:29:43 +08:00
.shellspec unit tests: add tests for get_grub_kernel_boot_parameter 2022-04-14 11:44:27 +08:00
60-fadump.install fadump: add a kernel install hook to clean up fadump initramfs 2022-12-07 09:42:29 +08:00
60-kdump.install Write to /var/lib/kdump if $KDUMP_BOOTDIR not writable 2021-04-19 16:11:17 +08:00
92-crashkernel.install Prefix reset-crashkernel-{for-installed_kernel,after-update} with underscore 2022-10-20 13:54:10 +08:00
98-kexec.rules Make udev reload rules quiet during bootup 2018-12-06 17:44:03 +08:00
98-kexec.rules.ppc64 powerpc: update fadump sysfs node path 2023-09-01 13:48:28 +08:00
0001-kexec-tools-2.0.27.git.patch [packit] 2.0.27 upstream release 2023-10-10 15:58:01 +08:00
0002-build-fix-tarball-creation.patch [packit] 2.0.27 upstream release 2023-10-10 15:58:01 +08:00
0003-zboot-enable-arm64-kexec_load-for-zboot-image.patch [packit] 2.0.27 upstream release 2023-10-10 15:58:01 +08:00
0004-zboot-add-loongarch-kexec_load-support.patch [packit] 2.0.27 upstream release 2023-10-10 15:58:01 +08:00
crashkernel-howto.txt remind the users to run zipl after calling grubby on s390x 2022-08-03 11:09:55 +08:00
dracut-early-kdump-module-setup.sh dracut-early-kdump-module-setup.sh: install xargs and kdump-lib-initramfs.sh 2021-12-27 09:16:19 +08:00
dracut-early-kdump.sh powerpc: update kdumpctl to load kernel signing key for fadump 2023-10-10 08:42:01 +08:00
dracut-fadump-init-fadump.sh fadump-init: clean up mount points properly 2021-06-30 17:28:45 +08:00
dracut-fadump-module-setup.sh fadump: isolate fadump initramfs image within the default one 2021-06-29 21:35:58 +08:00
dracut-kdump-capture.service kdump-capture.service: switch to journal for stdout 2022-04-02 16:24:32 +08:00
dracut-kdump-emergency.service Merge kdump-error-handler.sh into kdump.sh 2021-09-14 03:25:54 +08:00
dracut-kdump-emergency.target kdump-emergency: fix "Transaction is destructive" emergency failure 2017-03-31 11:54:30 +08:00
dracut-kdump.sh Show how much time kdump has waited for the network to be ready 2023-04-15 06:39:17 +08:00
dracut-module-setup.sh dracut-module-setup: remove dead source_ifcfg_file 2023-04-17 14:49:51 +08:00
dracut-monitor_dd_progress monitor-dd-progress fix 2013-06-25 16:45:59 +08:00
early-kdump-howto.txt Improves the early-kdump-howto.txt document in several points: 2020-03-12 23:31:34 +08:00
fadump-howto.txt powerpc: update fadump sysfs node path 2023-09-01 13:48:28 +08:00
gen-kdump-conf.sh kdump.conf: Remove option override_resettable 2023-09-14 15:01:52 +08:00
gen-kdump-sysconfig.sh kdump.conf: redirect unknown architecture warning to stderr 2023-06-09 10:19:04 +08:00
kdump-dep-generator.sh logger: source the logger file individually 2021-01-20 14:13:44 +08:00
kdump-in-cluster-environment.txt Add fence_kdump support for generic clusters 2014-04-03 14:43:06 +08:00
kdump-lib-initramfs.sh kdump-lib-initramfs: remove is_fs_dump_target 2023-04-17 14:49:51 +08:00
kdump-lib.sh kdump-lib.sh: add extra 64M to default crashkernel if sme/sev is active 2023-11-08 09:42:31 +08:00
kdump-logger.sh Add header comment for POSIX compliant scripts 2021-09-15 23:11:37 +08:00
kdump-migrate-action.sh kdump/ppc64: rebuild initramfs image after migration 2021-07-21 10:53:59 +08:00
kdump-restart.sh kdump/ppc64: rebuild initramfs image after migration 2021-07-21 10:53:59 +08:00
kdump-udev-throttler Make udev reload rules quiet during bootup 2018-12-06 17:44:03 +08:00
kdump.conf.5 kdump.conf: Remove option override_resettable 2023-09-14 15:01:52 +08:00
kdump.service kdumpctl: Move temp file in get_kernel_size to global temp dir 2023-05-16 09:21:13 +08:00
kdumpctl Only try to reset crashkernel when kdump.service is enabled 2023-10-17 13:45:30 +08:00
kdumpctl.8 add man documentation for kdumpctl get-default-crashkernel 2022-04-24 09:35:05 +08:00
kexec-kdump-howto.txt update kexec-kdump-howto 2022-04-24 09:35:05 +08:00
kexec-tools-2.0.23-s390_handle_R_390_PLT32DBL_reloc_entries_in_machine_apply_elf_rel_.patch s390: handle R_390_PLT32DBL reloc entries in machine_apply_elf_rel() 2022-01-26 08:25:43 +08:00
kexec-tools-2.0.26-makedumpfile-Fix-wrong-exclusion-of-slab-pages-on-Linux-6.2.patch makedumpfile: Fix wrong exclusion of slab pages on Linux 6.2-rc1 2023-01-30 17:37:23 +08:00
kexec-tools.spec Release 2.0.27-3 2023-10-17 13:54:48 +08:00
live-image-kdump-howto.txt Revert "kdumpctl: filter 'root' kernel parameter when running in live images" 2017-04-11 16:03:12 +08:00
mkdumprd kdump.conf: Remove option override_resettable 2023-09-14 15:01:52 +08:00
mkdumprd.8 Doc: improve mkdumprd man page 2020-12-11 14:05:08 +08:00
mkfadumprd kdump-lib: make is_zstd_command_available more generic 2023-09-14 15:01:52 +08:00
README README: Add a README file 2014-04-02 10:45:36 +08:00
README.packit [packit] 2.0.27 upstream release 2023-10-10 15:58:01 +08:00
sources [packit] 2.0.27 upstream release 2023-08-31 11:29:43 +08:00
zanata-notes.txt Add a notes for zanata process 2012-12-05 01:23:09 -05:00

Adding a patch to kexec-tools
=============================
There is a mailing list kexec@lists.fedoraproject.org where all the dicussion
related to fedora kexec-tools happen. All the patches are posted there for
inclusion and committed to kexec-tools after review.

So if you want your patches to be included in fedora kexec-tools package,
post these to kexec@lists.fedoraproject.org.

One can subscribe to list and browse through archives here.

https://admin.fedoraproject.org/mailman/listinfo/kexec