Import from CS git

.gitignore

@@ -1,3 +1,3 @@
+SOURCES/1.7.2.tar.gz
 SOURCES/eppic_050615.tar.gz
-SOURCES/kexec-tools-2.0.20.tar.xz
-SOURCES/makedumpfile-1.6.7.tar.gz
+SOURCES/kexec-tools-2.0.26.tar.xz

.kexec-tools.metadata

@@ -1,3 +1,3 @@
+24bce02cd42cdbb960ada4d9e733355582e35784 SOURCES/1.7.2.tar.gz
 a096c8e0892b559f40b01916aae240652f75b68a SOURCES/eppic_050615.tar.gz
-5d9acd2e741d356d4a48fe4f2d63f66ba431051d SOURCES/kexec-tools-2.0.20.tar.xz
-42941a0219d57d99909616778835e5d9ba890711 SOURCES/makedumpfile-1.6.7.tar.gz
+27cea5d032ec1e93506b8110222420abf754df2d SOURCES/kexec-tools-2.0.26.tar.xz

SOURCES/60-kdump.install

@@ -0,0 +1,36 @@
+#!/usr/bin/bash
+
+COMMAND="$1"
+KERNEL_VERSION="$2"
+KDUMP_INITRD_DIR_ABS="$3"
+KERNEL_IMAGE="$4"
+
+if ! [[ ${KERNEL_INSTALL_MACHINE_ID-x} ]]; then
+    exit 0
+fi
+
+if [[ -d "$KDUMP_INITRD_DIR_ABS" ]]; then
+    KDUMP_INITRD="initrdkdump"
+else
+    # If `KDUMP_BOOTDIR` is not writable, then the kdump
+    # initrd must have been placed at `/var/lib/kdump`
+    if [[ ! -w "/boot" ]]; then
+        KDUMP_INITRD_DIR_ABS="/var/lib/kdump"
+    else
+        KDUMP_INITRD_DIR_ABS="/boot"
+    fi
+    KDUMP_INITRD="initramfs-${KERNEL_VERSION}kdump.img"
+fi
+
+ret=0
+case "$COMMAND" in
+    add)
+        # Do nothing, kdump initramfs is strictly host only
+        # and managed by kdump service
+        ;;
+    remove)
+        rm -f -- "$KDUMP_INITRD_DIR_ABS/$KDUMP_INITRD"
+        ret=$?
+        ;;
+esac
+exit $ret

SOURCES/98-kexec.rules.ppc64

@@ -1,15 +1,22 @@
-SUBSYSTEM=="cpu", ACTION=="online", GOTO="kdump_reload"
-SUBSYSTEM=="memory", ACTION=="online", GOTO="kdump_reload"
-SUBSYSTEM=="memory", ACTION=="offline", GOTO="kdump_reload"
+SUBSYSTEM=="cpu", ACTION=="online", GOTO="kdump_reload_cpu"
+SUBSYSTEM=="memory", ACTION=="online", GOTO="kdump_reload_mem"
+SUBSYSTEM=="memory", ACTION=="offline", GOTO="kdump_reload_mem"
 
 GOTO="kdump_reload_end"
 
-LABEL="kdump_reload"
-
 # If kdump is not loaded, calling kdump-udev-throttle will end up
 # doing nothing, but systemd-run will always generate extra logs for
 # each call, so trigger the kdump-udev-throttler only if kdump
 # service is active to avoid unnecessary logs
+
+LABEL="kdump_reload_mem"
+
 RUN+="/bin/sh -c '/usr/bin/systemctl is-active kdump.service || exit 0; /usr/bin/systemd-run --quiet --no-block /usr/lib/udev/kdump-udev-throttler'"
 
+GOTO="kdump_reload_end"
+
+LABEL="kdump_reload_cpu"
+
+RUN+="/bin/sh -c '/usr/bin/systemctl is-active kdump.service || exit 0; ! test -f /sys/kernel/fadump_enabled || cat /sys/kernel/fadump_enabled | grep 0  || exit 0; /usr/bin/systemd-run --quiet --no-block /usr/lib/udev/kdump-udev-throttler'"
+
 LABEL="kdump_reload_end"

SOURCES/dracut-early-kdump-module-setup.sh

@@ -1,7 +1,6 @@
 #!/bin/bash
 
 . /etc/sysconfig/kdump
-. /lib/kdump/kdump-lib.sh
 
 KDUMP_KERNEL=""
 KDUMP_INITRD=""
@@ -21,18 +20,15 @@ depends() {
 }
 
 prepare_kernel_initrd() {
-    KDUMP_BOOTDIR=$(check_boot_dir "${KDUMP_BOOTDIR}")
-    if [ -z "$KDUMP_KERNELVER" ]; then
-        kdump_kver=`uname -r`
-        if [ "$kernel" != "$kdump_kver" ]; then
-            dwarn "Using current kernel version '$kdump_kver' for early kdump," \
-                "but the initramfs is generated for kernel version '$kernel'"
-        fi
-    else
-        kdump_kver=$KDUMP_KERNELVER
+    . /lib/kdump/kdump-lib.sh
+
+    prepare_kdump_bootinfo
+
+    # $kernel is a variable from dracut
+    if [ "$KDUMP_KERNELVER" != $kernel ]; then
+        dwarn "Using kernel version '$KDUMP_KERNELVER' for early kdump," \
+            "but the initramfs is generated for kernel version '$kernel'"
     fi
-    KDUMP_KERNEL="${KDUMP_BOOTDIR}/${KDUMP_IMG}-${kdump_kver}${KDUMP_IMG_EXT}"
-    KDUMP_INITRD="${KDUMP_BOOTDIR}/initramfs-${kdump_kver}kdump.img"
 }
 
 install() {
@@ -53,13 +49,16 @@ install() {
     inst_simple "/etc/sysconfig/kdump"
     inst_binary "/usr/sbin/kexec"
     inst_binary "/usr/bin/gawk" "/usr/bin/awk"
+    inst_binary "/usr/bin/logger" "/usr/bin/logger"
+    inst_binary "/usr/bin/printf" "/usr/bin/printf"
     inst_script "/lib/kdump/kdump-lib.sh" "/lib/kdump-lib.sh"
+    inst_script "/lib/kdump/kdump-logger.sh" "/lib/kdump-logger.sh"
     inst_hook cmdline 00 "$moddir/early-kdump.sh"
     inst_binary "$KDUMP_KERNEL"
     inst_binary "$KDUMP_INITRD"
 
-    ln_r "$KDUMP_KERNEL" "${KDUMP_BOOTDIR}/${KDUMP_IMG}-earlykdump${KDUMP_IMG_EXT}"
-    ln_r "$KDUMP_INITRD" "${KDUMP_BOOTDIR}/initramfs-earlykdump.img"
+    ln_r "$KDUMP_KERNEL" "/boot/kernel-earlykdump"
+    ln_r "$KDUMP_INITRD" "/boot/initramfs-earlykdump"
 
     chmod -x "${initdir}/$KDUMP_KERNEL"
 }

SOURCES/dracut-early-kdump.sh

@@ -12,14 +12,20 @@ EARLY_KEXEC_ARGS=""
 . /etc/sysconfig/kdump
 . /lib/dracut-lib.sh
 . /lib/kdump-lib.sh
+. /lib/kdump-logger.sh
+
+#initiate the kdump logger
+dlog_init
+if [ $? -ne 0 ]; then
+        echo "failed to initiate the kdump logger."
+        exit 1
+fi
 
 prepare_parameters()
 {
     EARLY_KDUMP_CMDLINE=$(prepare_cmdline "${KDUMP_COMMANDLINE}" "${KDUMP_COMMANDLINE_REMOVE}" "${KDUMP_COMMANDLINE_APPEND}")
-    KDUMP_BOOTDIR=$(check_boot_dir "${KDUMP_BOOTDIR}")
-
-    EARLY_KDUMP_KERNEL="${KDUMP_BOOTDIR}/${KDUMP_IMG}-earlykdump${KDUMP_IMG_EXT}"
-    EARLY_KDUMP_INITRD="${KDUMP_BOOTDIR}/initramfs-earlykdump.img"
+    EARLY_KDUMP_KERNEL="/boot/kernel-earlykdump"
+    EARLY_KDUMP_INITRD="/boot/initramfs-earlykdump"
 }
 
 early_kdump_load()
@@ -30,7 +36,7 @@ early_kdump_load()
     fi
 
     if is_fadump_capable; then
-        echo "WARNING: early kdump doesn't support fadump."
+        dwarn "WARNING: early kdump doesn't support fadump."
         return 1
     fi
 
@@ -43,19 +49,21 @@ early_kdump_load()
 
     EARLY_KEXEC_ARGS=$(prepare_kexec_args "${KEXEC_ARGS}")
 
-    if is_secure_boot_enforced; then
-        echo "Secure Boot is enabled. Using kexec file based syscall."
-        EARLY_KEXEC_ARGS="$EARLY_KEXEC_ARGS -s"
-    fi
+    # Here, only output the messages, but do not save these messages
+    # to a file because the target disk may not be mounted yet, the
+    # earlykdump is too early.
+    ddebug "earlykdump: $KEXEC ${EARLY_KEXEC_ARGS} $standard_kexec_args \
+	--command-line=$EARLY_KDUMP_CMDLINE --initrd=$EARLY_KDUMP_INITRD \
+	$EARLY_KDUMP_KERNEL"
 
     $KEXEC ${EARLY_KEXEC_ARGS} $standard_kexec_args \
         --command-line="$EARLY_KDUMP_CMDLINE" \
         --initrd=$EARLY_KDUMP_INITRD $EARLY_KDUMP_KERNEL
     if [ $? == 0 ]; then
-        echo "kexec: loaded early-kdump kernel"
+        dinfo "kexec: loaded early-kdump kernel"
         return 0
     else
-        echo "kexec: failed to load early-kdump kernel"
+        derror "kexec: failed to load early-kdump kernel"
         return 1
     fi
 }
@@ -63,10 +71,10 @@ early_kdump_load()
 set_early_kdump()
 {
     if getargbool 0 rd.earlykdump; then
-        echo "early-kdump is enabled."
+        dinfo "early-kdump is enabled."
         early_kdump_load
     else
-        echo "early-kdump is disabled."
+        dinfo "early-kdump is disabled."
     fi
 
     return 0

SOURCES/dracut-fadump-init-fadump.sh

@@ -0,0 +1,48 @@
+#!/bin/sh
+export PATH=/usr/bin:/usr/sbin
+export SYSTEMD_IN_INITRD=lenient
+
+[ -e /proc/mounts ] ||
+	(mkdir -p /proc && mount -t proc -o nosuid,noexec,nodev proc /proc)
+
+grep -q '^sysfs /sys sysfs' /proc/mounts ||
+	(mkdir -p /sys && mount -t sysfs -o nosuid,noexec,nodev sysfs /sys)
+
+grep -q '^none / ' /proc/mounts || grep -q '^rootfs / ' /proc/mounts && ROOTFS_IS_RAMFS=1
+
+if [ -f /proc/device-tree/rtas/ibm,kernel-dump ] || [ -f /proc/device-tree/ibm,opal/dump/mpipl-boot ]; then
+	mkdir /newroot
+	mount -t ramfs ramfs /newroot
+
+	if [ $ROOTFS_IS_RAMFS ]; then
+		for FILE in $(ls -A /fadumproot/); do
+			mv /fadumproot/$FILE /newroot/
+		done
+		exec switch_root /newroot /init
+	else
+		mkdir /newroot/sys /newroot/proc /newroot/dev /newroot/run /newroot/oldroot
+
+		grep -q '^devtmpfs /dev devtmpfs' /proc/mounts && mount --move /dev /newroot/dev
+		grep -q '^tmpfs /run tmpfs' /proc/mounts && mount --move /run /newroot/run
+		mount --move /sys /newroot/sys
+		mount --move /proc /newroot/proc
+
+		cp --reflink=auto --sparse=auto --preserve=mode,timestamps,links -dfr /fadumproot/. /newroot/
+		cd /newroot && pivot_root . oldroot
+
+		loop=1
+		while [ $loop ]; do
+			unset loop
+			while read -r _ mp _; do
+				case $mp in
+				/oldroot/*) umount -d "$mp" && loop=1 ;;
+				esac
+			done </proc/mounts
+		done
+		umount -d -l oldroot
+
+		exec /init
+	fi
+else
+	exec /init.dracut
+fi

SOURCES/dracut-fadump-module-setup.sh

@@ -0,0 +1,23 @@
+#!/bin/bash
+
+check() {
+    return 255
+}
+
+depends() {
+    return 0
+}
+
+install() {
+    mv -f "$initdir/init" "$initdir/init.dracut"
+    inst_script "$moddir/init-fadump.sh" /init
+    chmod a+x "$initdir/init"
+
+    # Install required binaries for the init script (init-fadump.sh)
+    inst_multiple sh modprobe grep mkdir mount
+    if dracut_module_included "squash"; then
+        inst_multiple cp pivot_root umount
+    else
+        inst_multiple ls mv switch_root
+    fi
+}

SOURCES/dracut-kdump.sh

@@ -5,7 +5,6 @@ if [ -f /etc/fadump.initramfs ] && [ ! -f /proc/device-tree/rtas/ibm,kernel-dump
     exit 0
 fi
 
-exec &> /dev/console
 . /lib/dracut-lib.sh
 . /lib/kdump-lib-initramfs.sh
 
@@ -22,7 +21,7 @@ do_dump()
     _ret=$?
 
     if [ $_ret -ne 0 ]; then
-        echo "kdump: saving vmcore failed"
+        derror "saving vmcore failed"
     fi
 
     return $_ret
@@ -36,7 +35,7 @@ do_kdump_pre()
         "$KDUMP_PRE"
         _ret=$?
         if [ $_ret -ne 0 ]; then
-            echo "kdump: $KDUMP_PRE exited with $_ret status"
+            derror "$KDUMP_PRE exited with $_ret status"
             return $_ret
         fi
     fi
@@ -47,7 +46,7 @@ do_kdump_pre()
             "$file"
             _ret=$?
             if [ $_ret -ne 0 ]; then
-                echo "kdump: $file exited with $_ret status"
+                derror "$file exited with $_ret status"
             fi
         done
     fi
@@ -63,7 +62,7 @@ do_kdump_post()
             "$file" "$1"
             _ret=$?
             if [ $_ret -ne 0 ]; then
-                echo "kdump: $file exited with $_ret status"
+                derror "$file exited with $_ret status"
             fi
         done
     fi
@@ -72,7 +71,7 @@ do_kdump_post()
         "$KDUMP_POST" "$1"
         _ret=$?
         if [ $_ret -ne 0 ]; then
-            echo "kdump: $KDUMP_POST exited with $_ret status"
+            derror "$KDUMP_POST exited with $_ret status"
         fi
     fi
 }
@@ -88,7 +87,7 @@ dump_raw()
 
     [ -b "$_raw" ] || return 1
 
-    echo "kdump: saving to raw disk $_raw"
+    dinfo "saving to raw disk $_raw"
 
     if ! $(echo -n $CORE_COLLECTOR|grep -q makedumpfile); then
         _src_size=`ls -l /proc/vmcore | cut -d' ' -f5`
@@ -96,21 +95,25 @@ dump_raw()
         monitor_dd_progress $_src_size_mb &
     fi
 
-    echo "kdump: saving vmcore"
+    dinfo "saving vmcore"
     $CORE_COLLECTOR /proc/vmcore | dd of=$_raw bs=$DD_BLKSIZE >> /tmp/dd_progress_file 2>&1 || return 1
     sync
 
-    echo "kdump: saving vmcore complete"
+    dinfo "saving vmcore complete"
     return 0
 }
 
 dump_ssh()
 {
+    local _ret=0
+    local _exitcode=0 _exitcode2=0
     local _opt="-i $1 -o BatchMode=yes -o StrictHostKeyChecking=yes"
     local _dir="$KDUMP_PATH/$HOST_IP-$DATEDIR"
     local _host=$2
+    local _vmcore="vmcore"
+    local _ipv6_addr="" _username=""
 
-    echo "kdump: saving to $_host:$_dir"
+    dinfo "saving to $_host:$_dir"
 
     cat /var/lib/random-seed > /dev/urandom
     ssh -q $_opt $_host mkdir -p $_dir || return 1
@@ -118,17 +121,54 @@ dump_ssh()
     save_vmcore_dmesg_ssh ${DMESG_COLLECTOR} ${_dir} "${_opt}" $_host
     save_opalcore_ssh ${_dir} "${_opt}" $_host
 
-    echo "kdump: saving vmcore"
+    dinfo "saving vmcore"
 
-    if [ "${CORE_COLLECTOR%%[[:blank:]]*}" = "scp" ]; then
-        scp -q $_opt /proc/vmcore "$_host:$_dir/vmcore-incomplete" || return 1
-        ssh $_opt $_host "mv $_dir/vmcore-incomplete $_dir/vmcore" || return 1
-    else
-        $CORE_COLLECTOR /proc/vmcore | ssh $_opt $_host "dd bs=512 of=$_dir/vmcore-incomplete" || return 1
-        ssh $_opt $_host "mv $_dir/vmcore-incomplete $_dir/vmcore.flat" || return 1
+    if is_ipv6_address "$_host"; then
+        _username=${_host%@*}
+        _ipv6_addr="[${_host#*@}]"
+    fi
+
+    if [ "${CORE_COLLECTOR%%[[:blank:]]*}" = "scp" ]; then
+        if [ -n "$_username" ] && [ -n "$_ipv6_addr" ]; then
+            scp -q $_opt /proc/vmcore "$_username@$_ipv6_addr:$_dir/vmcore-incomplete"
+        else
+            scp -q $_opt /proc/vmcore "$_host:$_dir/vmcore-incomplete"
+        fi
+        _exitcode=$?
+    else
+        $CORE_COLLECTOR /proc/vmcore | ssh $_opt $_host "umask 0077 && dd bs=512 of=$_dir/vmcore-incomplete"
+        _exitcode=$?
+        _vmcore="vmcore.flat"
+    fi
+
+    if [ $_exitcode -eq 0 ]; then
+        ssh $_opt $_host "mv $_dir/vmcore-incomplete $_dir/$_vmcore"
+        _exitcode2=$?
+        if [ $_exitcode2 -ne 0 ]; then
+            derror "moving vmcore failed, _exitcode:$_exitcode2"
+        else
+            dinfo "saving vmcore complete"
+        fi
+    else
+        derror "saving vmcore failed, _exitcode:$_exitcode"
+    fi
+
+    dinfo "saving the $KDUMP_LOG_FILE to $_host:$_dir/"
+    save_log
+    if [ -n "$_username" ] && [ -n "$_ipv6_addr" ]; then
+        scp -q $_opt $KDUMP_LOG_FILE "$_username@$_ipv6_addr:$_dir/"
+    else
+        scp -q $_opt $KDUMP_LOG_FILE "$_host:$_dir/"
+    fi
+    _ret=$?
+    if [ $_ret -ne 0 ]; then
+        derror "saving log file failed, _exitcode:$_ret"
+    fi
+
+    if [ $_exitcode -ne 0 ] || [ $_exitcode2 -ne 0 ];then
+        return 1
     fi
 
-    echo "kdump: saving vmcore complete"
     return 0
 }
 
@@ -136,6 +176,9 @@ save_opalcore_ssh() {
     local _path=$1
     local _opts="$2"
     local _location=$3
+    local _user_name="" _ipv6addr=""
+
+    ddebug "_path=$_path _opts=$_opts _location=$_location"
 
     if [ ! -f $OPALCORE ]; then
         # Check if we are on an old kernel that uses a different path
@@ -146,15 +189,25 @@ save_opalcore_ssh() {
         fi
     fi
 
-    echo "kdump: saving opalcore"
-    scp $_opts $OPALCORE $_location:$_path/opalcore-incomplete
+    if is_ipv6_address "$_host"; then
+        _user_name=${_location%@*}
+        _ipv6addr="[${_location#*@}]"
+    fi
+
+    dinfo "saving opalcore:$OPALCORE to $_location:$_path"
+
+    if [ -n "$_user_name" ] && [ -n "$_ipv6addr" ]; then
+        scp $_opts $OPALCORE $_user_name@$_ipv6addr:$_path/opalcore-incomplete
+    else
+        scp $_opts $OPALCORE $_location:$_path/opalcore-incomplete
+    fi
     if [ $? -ne 0 ]; then
-        echo "kdump: saving opalcore failed"
+        derror "saving opalcore failed"
        return 1
     fi
 
     ssh $_opts $_location mv $_path/opalcore-incomplete $_path/opalcore
-    echo "kdump: saving opalcore complete"
+    dinfo "saving opalcore complete"
     return 0
 }
 
@@ -164,15 +217,15 @@ save_vmcore_dmesg_ssh() {
     local _opts="$3"
     local _location=$4
 
-    echo "kdump: saving vmcore-dmesg.txt"
-    $_dmesg_collector /proc/vmcore | ssh $_opts $_location "dd of=$_path/vmcore-dmesg-incomplete.txt"
+    dinfo "saving vmcore-dmesg.txt to $_location:$_path"
+    $_dmesg_collector /proc/vmcore | ssh $_opts $_location "umask 0077 && dd of=$_path/vmcore-dmesg-incomplete.txt"
     _exitcode=$?
 
     if [ $_exitcode -eq 0 ]; then
         ssh -q $_opts $_location mv $_path/vmcore-dmesg-incomplete.txt $_path/vmcore-dmesg.txt
-        echo "kdump: saving vmcore-dmesg.txt complete"
+        dinfo "saving vmcore-dmesg.txt complete"
     else
-        echo "kdump: saving vmcore-dmesg.txt failed"
+        derror "saving vmcore-dmesg.txt failed"
     fi
 }
 
@@ -182,12 +235,12 @@ get_host_ip()
     if is_nfs_dump_target || is_ssh_dump_target
     then
         kdumpnic=$(getarg kdumpnic=)
-        [ -z "$kdumpnic" ] && echo "kdump: failed to get kdumpnic!" && return 1
+        [ -z "$kdumpnic" ] && derror "failed to get kdumpnic!" && return 1
         _host=`ip addr show dev $kdumpnic|grep '[ ]*inet'`
-        [ $? -ne 0 ] && echo "kdump: wrong kdumpnic: $kdumpnic" && return 1
+        [ $? -ne 0 ] && derror "wrong kdumpnic: $kdumpnic" && return 1
         _host=`echo $_host | head -n 1 | cut -d' ' -f2`
         _host="${_host%%/*}"
-        [ -z "$_host" ] && echo "kdump: wrong kdumpnic: $kdumpnic" && return 1
+        [ -z "$_host" ] && derror "wrong kdumpnic: $kdumpnic" && return 1
         HOST_IP=$_host
     fi
     return 0
@@ -196,7 +249,7 @@ get_host_ip()
 read_kdump_conf()
 {
     if [ ! -f "$KDUMP_CONF" ]; then
-        echo "kdump: $KDUMP_CONF not found"
+        derror "$KDUMP_CONF not found"
         return
     fi
 
@@ -240,7 +293,7 @@ fence_kdump_notify
 
 get_host_ip
 if [ $? -ne 0 ]; then
-    echo "kdump: get_host_ip exited with non-zero status!"
+    derror "get_host_ip exited with non-zero status!"
     exit 1
 fi
 
@@ -250,7 +303,7 @@ fi
 
 do_kdump_pre
 if [ $? -ne 0 ]; then
-    echo "kdump: kdump_pre script exited with non-zero status!"
+    derror "kdump_pre script exited with non-zero status!"
     do_final_action
     # During systemd service to reboot the machine, stop this shell script running
     exit 1
@@ -261,7 +314,7 @@ DUMP_RETVAL=$?
 
 do_kdump_post $DUMP_RETVAL
 if [ $? -ne 0 ]; then
-    echo "kdump: kdump_post script exited with non-zero status!"
+    derror "kdump_post script exited with non-zero status!"
 fi
 
 if [ $DUMP_RETVAL -ne 0 ]; then

SOURCES/dracut-module-setup.sh

@@ -1,11 +1,27 @@
 #!/bin/bash
 
-. $dracutfunctions
-. /lib/kdump/kdump-lib.sh
+_save_kdump_netifs() {
+    local _name
 
-if ! [[ -d "${initdir}/tmp" ]]; then
-    mkdir -p "${initdir}/tmp"
-fi
+    if [[ -n $2 ]]; then
+        _name=$2
+    else
+        _name=$1
+    fi
+    unique_netifs[$1]=$_name
+}
+
+_get_kdump_netifs() {
+    echo -n "${!unique_netifs[@]}"
+}
+
+kdump_module_init() {
+    if ! [[ -d "${initdir}/tmp" ]]; then
+        mkdir -p "${initdir}/tmp"
+    fi
+
+    . /lib/kdump/kdump-lib.sh
+}
 
 check() {
     [[ $debug ]] && set -x
@@ -20,24 +36,41 @@ check() {
 depends() {
     local _dep="base shutdown"
 
-    is_squash_available() {
-        for kmodule in squashfs overlay loop; do
-            if [ -z "$KDUMP_KERNELVER" ]; then
-                modprobe --dry-run $kmodule &>/dev/null || return 1
-            else
-                modprobe -S $KDUMP_KERNELVER --dry-run $kmodule &>/dev/null || return 1
-            fi
-        done
+    kdump_module_init
+
+    add_opt_module() {
+        [[ " $omit_dracutmodules " != *\ $1\ * ]] && _dep="$_dep $1"
     }
 
-    if is_squash_available && ! is_fadump_capable; then
-        _dep="$_dep squash"
+    if is_squash_available; then
+        add_opt_module squash
     else
         dwarning "Required modules to build a squashed kdump image is missing!"
     fi
 
+    add_opt_module watchdog-modules
+    if is_wdt_active; then
+        add_opt_module watchdog
+    fi
+
+    if is_ssh_dump_target; then
+        _dep="$_dep ssh-client"
+    fi
+
+    if is_lvm2_thinp_dump_target; then
+        if grep -q lvmthinpool-monitor <<< $(dracut --list-modules); then
+            add_opt_module lvmthinpool-monitor
+        else
+            dwarning "Required lvmthinpool-monitor modules is missing! Please upgrade dracut >= 057."
+        fi
+    fi
+
+    if [ "$(uname -m)" = "s390x" ]; then
+        _dep="$_dep znet"
+    fi
+
     if [ -n "$( find /sys/devices -name drm )" ] || [ -d /sys/module/hyperv_fb ]; then
-        _dep="$_dep drm"
+        add_opt_module drm
     fi
 
     if is_generic_fence_kdump || is_pcs_fence_kdump; then
@@ -45,7 +78,6 @@ depends() {
     fi
 
     echo $_dep
-    return 0
 }
 
 kdump_is_bridge() {
@@ -76,6 +108,17 @@ source_ifcfg_file() {
     fi
 }
 
+add_dns_netdev() {
+    local _server _route
+
+    _server=$1
+    _route=`/sbin/ip -o route get to $_server 2>&1`
+    [ $? != 0 ] && echo "DNS server $_server unreachable"
+
+    _netdev=$(get_ip_route_field "$_route" "dev")
+    _save_kdump_netifs "$_netdev" "$(kdump_setup_ifname $_netdev)"
+}
+
 # $1: netdev name
 kdump_setup_dns() {
     local _nameserver _dns
@@ -83,8 +126,8 @@ kdump_setup_dns() {
 
     source_ifcfg_file $1
 
-    [ -n "$DNS1" ] && echo "nameserver=$DNS1" > "$_dnsfile"
-    [ -n "$DNS2" ] && echo "nameserver=$DNS2" >> "$_dnsfile"
+    [ -n "$DNS1" ] && echo "nameserver=$DNS1" > "$_dnsfile" && add_dns_netdev "$DNS1"
+    [ -n "$DNS2" ] && echo "nameserver=$DNS2" >> "$_dnsfile" && add_dns_netdev "$DNS2"
 
     while read content;
     do
@@ -96,16 +139,127 @@ kdump_setup_dns() {
 
         if [ ! -f $_dnsfile ] || [ ! $(cat $_dnsfile | grep -q $_dns) ]; then
             echo "nameserver=$_dns" >> "$_dnsfile"
+            add_dns_netdev "$_dns"
         fi
     done < "/etc/resolv.conf"
 }
 
+# $1: repeat times
+# $2: string to be repeated
+# $3: separator
+repeatedly_join_str() {
+    local _count="$1"
+    local _str="$2"
+    local _separator="$3"
+    local i _res
+
+    if [[ "$_count" -le 0 ]]; then
+        echo -n ""
+        return
+    fi
+
+    i=0
+    _res="$_str"
+    ((_count--))
+
+    while [[ "$i" -lt "$_count" ]]; do
+        ((i++))
+        _res="${_res}${_separator}${_str}"
+    done
+    echo -n "$_res"
+}
+
+# $1: prefix
+# $2: ipv6_flag="-6" indicates it's IPv6
+# Given a prefix, calculate the netmask (equivalent of "ipcalc -m")
+# by concatenating three parts,
+#  1) the groups with all bits set 1
+#  2) a group with partial bits set to 0
+#  3) the groups with all bits set to 0
+cal_netmask_by_prefix() {
+    local _prefix="$1"
+    local _ipv6_flag="$2" _ipv6
+    local _bits_per_octet=8
+    local _count _res _octets_per_group _octets_total _seperator _total_groups
+    local _max_group_value _max_group_value_repr _bits_per_group _tmp _zero_bits
+
+    if [[ "$_ipv6_flag" == "-6" ]]; then
+        _ipv6=1
+    else
+        _ipv6=0
+    fi
+
+    if [[ "$_prefix" -lt 0  ||  "$_prefix" -gt 128 ]] || \
+        ( ((!_ipv6)) && [[ "$_prefix" -gt 32 ]] ); then
+        derror "Bad prefix:$_prefix for calculating netmask"
+        exit 1
+    fi
+
+    if ((_ipv6)); then
+        _octets_per_group=2
+        _octets_total=16
+        _seperator=":"
+    else
+        _octets_per_group=1
+        _octets_total=4
+        _seperator="."
+    fi
+
+    _total_groups=$((_octets_total/_octets_per_group))
+    _bits_per_group=$((_octets_per_group * _bits_per_octet))
+    _max_group_value=$(((1 << _bits_per_group) - 1))
+
+    if ((_ipv6)); then
+        _max_group_value_repr=$(printf "%x" $_max_group_value)
+    else
+        _max_group_value_repr="$_max_group_value"
+    fi
+
+    _count=$((_prefix/_octets_per_group/_bits_per_octet))
+    _first_part=$(repeatedly_join_str "$_count" "$_max_group_value_repr" "$_seperator")
+    _res="$_first_part"
+
+    _tmp=$((_octets_total*_bits_per_octet-_prefix))
+    _zero_bits=$(expr $_tmp % $_bits_per_group)
+    if [[ "$_zero_bits" -ne 0 ]]; then
+        _second_part=$((_max_group_value >> _zero_bits << _zero_bits))
+        if ((_ipv6)); then
+            _second_part=$(printf "%x" $_second_part)
+        fi
+        ((_count++))
+        if [[ -z "$_first_part" ]]; then
+            _res="$_second_part"
+        else
+            _res="${_first_part}${_seperator}${_second_part}"
+        fi
+    fi
+
+    _count=$((_total_groups-_count))
+    if [[ "$_count" -eq 0 ]]; then
+        echo -n "$_res"
+        return
+    fi
+
+    if ((_ipv6)) && [[ "$_count" -gt 1 ]] ; then
+        # use condensed notion for IPv6
+        _third_part=":"
+    else
+        _third_part=$(repeatedly_join_str "$_count" "0" "$_seperator")
+    fi
+
+    if [[ -z "$_res" ]] && ((!_ipv6)) ; then
+        echo -n "${_third_part}"
+    else
+        echo -n "${_res}${_seperator}${_third_part}"
+    fi
+}
+
 #$1: netdev name
 #$2: srcaddr
 #if it use static ip echo it, or echo null
 kdump_static_ip() {
-    local _netdev="$1" _srcaddr="$2" _ipv6_flag
-    local _netmask _gateway _ipaddr _target _nexthop
+    local _netdev="$1" _srcaddr="$2" kdumpnic="$3" _ipv6_flag
+    local _netmask _gateway _ipaddr _target _nexthop _prefix
 
     _ipaddr=$(ip addr show dev $_netdev permanent | awk "/ $_srcaddr\/.* /{print \$2}")
 
@@ -123,7 +277,12 @@ kdump_static_ip() {
             _srcaddr="[$_srcaddr]"
             _gateway="[$_gateway]"
         else
-            _netmask=$(ipcalc -m $_ipaddr | cut -d'=' -f2)
+            _prefix=$(cut -d'/' -f2 <<< "$_ipaddr")
+            _netmask=$(cal_netmask_by_prefix "$_prefix" "$_ipv6_flag")
+            if [[ "$?" -ne 0 ]]; then
+                derror "Failed to calculate netmask for $_ipaddr"
+                exit 1
+            fi
         fi
         echo -n "${_srcaddr}::${_gateway}:${_netmask}::"
     fi
@@ -136,7 +295,7 @@ kdump_static_ip() {
             _target="[$_target]"
             _nexthop="[$_nexthop]"
         fi
-        echo "rd.route=$_target:$_nexthop:$_netdev"
+        echo "rd.route=$_target:$_nexthop:$kdumpnic"
     done >> ${initdir}/etc/cmdline.d/45route-static.conf
 }
 
@@ -167,7 +326,7 @@ kdump_setup_ifname() {
     # fadump to kdump. Skip prefixing 'kdump-' in this case as adding
     # another prefix may truncate the ifname. Since an ifname with
     # 'kdump-' is already persistent, this should be fine.
-    if [[ $1 =~ eth* ]] && [[ ! $1 =~ ^kdump-* ]]; then
+    if [[ $1 =~ ^eth.* ]] && [[ ! $1 =~ ^kdump-* ]]; then
         _ifname="kdump-$1"
     else
         _ifname="$1"
@@ -176,11 +335,80 @@ kdump_setup_ifname() {
     echo "$_ifname"
 }
 
+kdump_install_nm_netif_allowlist() {
+    local _netif _except_netif _netif_allowlist _netif_allowlist_nm_conf
+
+    for _netif in $1; do
+        _per_mac=$(kdump_get_perm_addr "$_netif")
+        if [[ "$_per_mac" != 'not set' ]]; then
+            _except_netif="mac:$_per_mac"
+        else
+            _except_netif="interface-name:${unique_netifs[${_netif}]}"
+        fi
+        _netif_allowlist="${_netif_allowlist}except:${_except_netif};"
+    done
+
+    _netif_allowlist_nm_conf=${initdir}/tmp/netif_allowlist_nm_conf
+    cat << EOF > "$_netif_allowlist_nm_conf"
+[device-others]
+match-device=${_netif_allowlist}
+managed=false
+EOF
+
+    inst "$_netif_allowlist_nm_conf" "/etc/NetworkManager/conf.d/10-kdump-netif_allowlist.conf"
+    rm -f "$_netif_allowlist_nm_conf"
+}
+
+_get_nic_driver() {
+    ethtool -i "$1" | sed -n -E "s/driver: (.*)/\1/p"
+}
+
+_get_hpyerv_physical_driver() {
+    local _physical_nic
+
+    _physical_nic=$(find /sys/class/net/"$1"/ -name 'lower_*' | sed -En "s/\/.*lower_(.*)/\1/p")
+    [[ -n $_physical_nic ]] || return
+    _get_nic_driver "$_physical_nic"
+}
+
+kdump_install_nic_driver() {
+    local _netif _driver _drivers
+
+    _drivers=()
+
+    for _netif in $1; do
+        [[ $_netif == lo ]] && continue
+        _driver=$(_get_nic_driver "$_netif")
+        if [[ -z $_driver ]]; then
+            derror "Failed to get the driver of $_netif"
+            exit 1
+        fi
+
+        if [[ $_driver == "802.1Q VLAN Support" ]]; then
+            # ethtool somehow doesn't return the driver name for a VLAN NIC
+            _driver=8021q
+        elif [[ $_driver == "team" ]]; then
+            # install the team mode drivers like team_mode_roundrobin.ko as well
+            _driver='=drivers/net/team'
+        elif [[ $_driver == "hv_netvsc" ]]; then
+            # A Hyper-V VM may have accelerated networking
+            # https://learn.microsoft.com/en-us/azure/virtual-network/accelerated-networking-overview
+            # Install the driver of physical NIC as well
+            _drivers+=("$(_get_hpyerv_physical_driver "$_netif")")
+        fi
+
+        _drivers+=("$_driver")
+    done
+
+    [[ -n ${_drivers[*]} ]] || return
+    instmods "${_drivers[@]}"
+}
+
 kdump_setup_bridge() {
     local _netdev=$1
     local _brif _dev _mac _kdumpdev
     for _dev in `ls /sys/class/net/$_netdev/brif/`; do
-        _kdumpdev=$_dev
+        _kdumpdev=""
         if kdump_is_bond "$_dev"; then
             kdump_setup_bond "$_dev"
         elif kdump_is_team "$_dev"; then
@@ -192,6 +420,8 @@ kdump_setup_bridge() {
             _kdumpdev=$(kdump_setup_ifname $_dev)
             echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/41bridge.conf
         fi
+        _save_kdump_netifs "$_dev" "$_kdumpdev"
+        [[ -z $_kdumpdev ]] && _kdumpdev=$_dev
         _brif+="$_kdumpdev,"
     done
     echo " bridge=$_netdev:$(echo $_brif | sed -e 's/,$//')" >> ${initdir}/etc/cmdline.d/41bridge.conf
@@ -203,6 +433,7 @@ kdump_setup_bond() {
     for _dev in `cat /sys/class/net/$_netdev/bonding/slaves`; do
         _mac=$(kdump_get_perm_addr $_dev)
         _kdumpdev=$(kdump_setup_ifname $_dev)
+        _save_kdump_netifs "$_dev" "$_kdumpdev"
         echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/42bond.conf
         _slaves+="$_kdumpdev,"
     done
@@ -221,6 +452,7 @@ kdump_setup_team() {
     for _dev in `teamnl $_netdev ports | awk -F':' '{print $2}'`; do
         _mac=$(kdump_get_perm_addr $_dev)
         _kdumpdev=$(kdump_setup_ifname $_dev)
+        _save_kdump_netifs "$_dev" "$_kdumpdev"
         echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/44team.conf
         _slaves+="$_kdumpdev,"
     done
@@ -244,14 +476,10 @@ kdump_setup_vlan() {
     local _netmac="$(kdump_get_mac_addr $_phydev)"
     local _kdumpdev
 
-    #Just support vlan over bond, it is not easy
-    #to support all other complex setup
+    #Just support vlan over bond and team
     if kdump_is_bridge "$_phydev"; then
         derror "Vlan over bridge is not supported!"
         exit 1
-    elif kdump_is_team "$_phydev"; then
-        derror "Vlan over team is not supported!"
-        exit 1
     elif kdump_is_bond "$_phydev"; then
         kdump_setup_bond "$_phydev"
 	echo " vlan=$(kdump_setup_ifname $_netdev):$_phydev" > ${initdir}/etc/cmdline.d/43vlan.conf
@@ -259,6 +487,38 @@ kdump_setup_vlan() {
         _kdumpdev="$(kdump_setup_ifname $_phydev)"
 	echo " vlan=$(kdump_setup_ifname $_netdev):$_kdumpdev ifname=$_kdumpdev:$_netmac" > ${initdir}/etc/cmdline.d/43vlan.conf
     fi
+    _save_kdump_netifs "$_phydev" "$_kdumpdev"
+}
+
+# find online znet device
+# return ifname (_netdev)
+# code reaped from the list_configured function of
+# https://github.com/hreinecke/s390-tools/blob/master/zconf/znetconf
+find_online_znet_device() {
+	local CCWGROUPBUS_DEVICEDIR="/sys/bus/ccwgroup/devices"
+	local NETWORK_DEVICES d ifname ONLINE
+
+	[ ! -d "$CCWGROUPBUS_DEVICEDIR" ] && return
+	NETWORK_DEVICES=$(find $CCWGROUPBUS_DEVICEDIR)
+	for d in $NETWORK_DEVICES
+	do
+		[ ! -f "$d/online" ] && continue
+		read ONLINE < $d/online
+		if [ $ONLINE -ne 1 ]; then
+			continue
+		fi
+		# determine interface name, if there (only for qeth and if
+		# device is online)
+		if [ -f $d/if_name ]
+		then
+			read ifname < $d/if_name
+		elif [ -d $d/net ]
+		then
+			ifname=$(ls $d/net/)
+		fi
+		[ -n "$ifname" ] && break
+	done
+	echo -n "$ifname"
 }
 
 # setup s390 znet cmdline
@@ -269,33 +529,56 @@ kdump_setup_znet() {
 
     source_ifcfg_file $_netdev
 
+    [[ -z "$NETTYPE" ]] && return
+    [[ -z "$SUBCHANNELS" ]] && return
+
     for i in $OPTIONS; do
         _options=${_options},$i
     done
-    echo rd.znet=${NETTYPE},${SUBCHANNELS}${_options} rd.znet_ifname=$_netdev:${SUBCHANNELS} > ${initdir}/etc/cmdline.d/30znet.conf
+    echo rd.znet=${NETTYPE},${SUBCHANNELS}${_options} rd.znet_ifname=$(kdump_setup_ifname $_netdev):${SUBCHANNELS} > ${initdir}/etc/cmdline.d/30znet.conf
+}
+
+_get_nic_driver() {
+    ethtool -i "$1" | sed -n -E "s/driver: (.*)/\1/p"
+}
+
+_rename_hypver_netdev() {
+    local _udev_rule_dir
+
+    _udev_rule_dir=${initdir}/etc/udev/rules.d
+    mkdir -p "$_udev_rule_dir"
+    printf 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="hv_netvsc", ATTR{address}=="%s", ATTR{type}=="1", NAME="%s"\n' "$2" "$1" > "${_udev_rule_dir}/80-hv_netvsc-ifname.rules"
 }
 
 # Setup dracut to bringup a given network interface
 kdump_setup_netdev() {
     local _netdev=$1 _srcaddr=$2
-    local _static _proto _ip_conf _ip_opts _ifname_opts
+    local _static _proto _ip_conf _ip_opts _ifname_opts kdumpnic
     local _netmac=$(kdump_get_mac_addr $_netdev)
+    local _znet_netdev
 
-    if [ "$(uname -m)" = "s390x" ]; then
-        kdump_setup_znet $_netdev
+    kdumpnic=$(kdump_setup_ifname $_netdev)
+
+    _znet_netdev=$(find_online_znet_device)
+    if [[ -n "$_znet_netdev" ]]; then
+        $(kdump_setup_znet "$_znet_netdev")
+        if [[ $? != 0 ]]; then
+            derror "Failed to set up znet"
+            exit 1
+        fi
     fi
 
-    _static=$(kdump_static_ip $_netdev $_srcaddr)
+    _static=$(kdump_static_ip $_netdev $_srcaddr $kdumpnic)
     if [ -n "$_static" ]; then
         _proto=none
     elif is_ipv6_address $_srcaddr; then
-        _proto=either6
+        _proto=auto6
     else
         _proto=dhcp
     fi
 
     _ip_conf="${initdir}/etc/cmdline.d/40ip.conf"
-    _ip_opts=" ip=${_static}$(kdump_setup_ifname $_netdev):${_proto}"
+    _ip_opts=" ip=${_static}$kdumpnic:${_proto}"
 
     # dracut doesn't allow duplicated configuration for same NIC, even they're exactly the same.
     # so we have to avoid adding duplicates
@@ -315,9 +598,14 @@ kdump_setup_netdev() {
     elif kdump_is_vlan "$_netdev"; then
         kdump_setup_vlan "$_netdev"
     else
-        _ifname_opts=" ifname=$(kdump_setup_ifname $_netdev):$_netmac"
-        echo "$_ifname_opts" >> $_ip_conf
+        if [[ $(_get_nic_driver "$1") != hv_netvsc ]]; then
+            _ifname_opts=" ifname=$kdumpnic:$_netmac"
+            echo "$_ifname_opts" >> $_ip_conf
+        else
+            _rename_hypver_netdev "$kdumpnic" "$_netmac"
+        fi
     fi
+    _save_kdump_netifs "$_netdev" "$_kdumpdev"
 
     kdump_setup_dns "$_netdev"
 
@@ -606,7 +894,7 @@ kdump_check_iscsi_targets () {
     # If our prerequisites are not met, fail anyways.
     type -P iscsistart >/dev/null || return 1
 
-    kdump_check_setup_iscsi() (
+    kdump_check_setup_iscsi() {
         local _dev
         _dev=$1
 
@@ -616,7 +904,7 @@ kdump_check_iscsi_targets () {
             cd ..
         done
         [[ -d iscsi_session ]] && kdump_setup_iscsi_device "$PWD"
-    )
+    }
 
     [[ $hostonly ]] || [[ $mount_needs ]] && {
         for_each_host_dev_and_slaves_all kdump_check_setup_iscsi
@@ -759,9 +1047,33 @@ remove_cpu_online_rule() {
     sed -i '/SUBSYSTEM=="cpu"/d' $file
 }
 
-install() {
-    local arch
+kdump_install_systemd_conf() {
+    local failure_action=$(get_option_value "failure_action")
 
+    # Kdump turns out to require longer default systemd mount timeout
+    # than 1st kernel(90s by default), we use default 300s for kdump.
+    grep -r "^[[:space:]]*DefaultTimeoutStartSec=" ${initdir}/etc/systemd/system.conf* &>/dev/null
+    if [ $? -ne 0 ]; then
+        mkdir -p ${initdir}/etc/systemd/system.conf.d
+        echo "[Manager]" > ${initdir}/etc/systemd/system.conf.d/kdump.conf
+        echo "DefaultTimeoutStartSec=300s" >> ${initdir}/etc/systemd/system.conf.d/kdump.conf
+    fi
+
+    # Forward logs to console directly, and don't read Kmsg, this avoids
+    # unneccessary memory consumption and make console output more useful.
+    # Only do so for non fadump image.
+    mkdir -p ${initdir}/etc/systemd/journald.conf.d
+    echo "[Journal]" > ${initdir}/etc/systemd/journald.conf.d/kdump.conf
+    echo "Storage=volatile" >> ${initdir}/etc/systemd/journald.conf.d/kdump.conf
+    echo "ReadKMsg=no" >> ${initdir}/etc/systemd/journald.conf.d/kdump.conf
+    echo "ForwardToConsole=yes" >> ${initdir}/etc/systemd/journald.conf.d/kdump.conf
+}
+
+install() {
+    declare -A unique_netifs
+    local arch _netifs
+
+    kdump_module_init
     kdump_install_conf
     remove_sysctl_conf
 
@@ -789,11 +1101,15 @@ install() {
     inst "/bin/head" "/bin/head"
     inst "/sbin/makedumpfile" "/sbin/makedumpfile"
     inst "/sbin/vmcore-dmesg" "/sbin/vmcore-dmesg"
+    inst "/usr/bin/printf" "/sbin/printf"
+    inst "/usr/bin/logger" "/sbin/logger"
+    inst "/usr/bin/chmod" "/sbin/chmod"
     inst "/lib/kdump/kdump-lib.sh" "/lib/kdump-lib.sh"
     inst "/lib/kdump/kdump-lib-initramfs.sh" "/lib/kdump-lib-initramfs.sh"
+    inst "/lib/kdump/kdump-logger.sh" "/lib/kdump-logger.sh"
     inst "$moddir/kdump.sh" "/usr/bin/kdump.sh"
     inst "$moddir/kdump-capture.service" "$systemdsystemunitdir/kdump-capture.service"
-    ln_r "$systemdsystemunitdir/kdump-capture.service" "$systemdsystemunitdir/initrd.target.wants/kdump-capture.service"
+    systemctl -q --root "$initdir" add-wants initrd.target kdump-capture.service
     inst "$moddir/kdump-error-handler.sh" "/usr/bin/kdump-error-handler.sh"
     inst "$moddir/kdump-error-handler.service" "$systemdsystemunitdir/kdump-error-handler.service"
     # Replace existing emergency service and emergency target
@@ -807,6 +1123,14 @@ install() {
     # at some point of time.
     kdump_check_iscsi_targets
 
+    _netifs=$(_get_kdump_netifs)
+    if [[ -n "$_netifs" ]]; then
+        kdump_install_nm_netif_allowlist "$_netifs"
+        kdump_install_nic_driver "$_netifs"
+    fi
+
+    kdump_install_systemd_conf
+
     # For the lvm type target under kdump, in /etc/lvm/lvm.conf we can
     # safely replace "reserved_memory=XXXX"(default value is 8192) with
     # "reserved_memory=1024" to lower memory pressure under kdump. We do
@@ -816,25 +1140,15 @@ install() {
       's/\(^[[:space:]]*reserved_memory[[:space:]]*=\)[[:space:]]*[[:digit:]]*/\1 1024/' \
       ${initdir}/etc/lvm/lvm.conf &>/dev/null
 
-    # Kdump turns out to require longer default systemd mount timeout
-    # than 1st kernel(90s by default), we use default 300s for kdump.
-    grep -r "^[[:space:]]*DefaultTimeoutStartSec=" ${initdir}/etc/systemd/system.conf* &>/dev/null
-    if [ $? -ne 0 ]; then
-        mkdir -p ${initdir}/etc/systemd/system.conf.d
-        echo "[Manager]" > ${initdir}/etc/systemd/system.conf.d/kdump.conf
-        echo "DefaultTimeoutStartSec=300s" >> ${initdir}/etc/systemd/system.conf.d/kdump.conf
-    fi
+    # Skip initrd-cleanup.service and initrd-parse-etc.service becasue we don't
+    # need to switch root. Instead of removing them, we use ConditionPathExists
+    # to check if /proc/vmcore exists to determine if we are in kdump.
+    sed -i '/\[Unit\]/a ConditionPathExists=!\/proc\/vmcore' \
+        "${initdir}/${systemdsystemunitdir}/initrd-cleanup.service" &> /dev/null
 
-    if ! is_fadump_capable; then
-        # Forward logs to console directly, this avoids unneccessary memory
-        # consumption and make console output more useful.
-        # Only do so for non fadump image.
-        mkdir -p ${initdir}/etc/systemd/journald.conf.d
-        echo "[Journal]" > ${initdir}/etc/systemd/journald.conf.d/kdump.conf
-        echo "Storage=none" >> ${initdir}/etc/systemd/journald.conf.d/kdump.conf
-        echo "ForwardToConsole=yes" >> ${initdir}/etc/systemd/journald.conf.d/kdump.conf
+    sed -i '/\[Unit\]/a ConditionPathExists=!\/proc\/vmcore' \
+        "${initdir}/${systemdsystemunitdir}/initrd-parse-etc.service" &> /dev/null
 
-        # Save more memory by dropping switch root capability
-        dracut_no_switch_root
-    fi
+    # Save more memory by dropping switch root capability
+    dracut_no_switch_root
 }

SOURCES/fadump-howto.txt

@@ -104,6 +104,11 @@ For the recommended value of X, see 'FADump Memory Requirements' section.
 
    # grubby --args="fadump=on crashkernel=6G" --update-kernel=/boot/vmlinuz-`uname -r`
 
+By default, FADump reserved memory will be initialized as CMA area to make the
+memory available through CMA allocator on the production kernel. We can opt out
+of this, making reserved memory unavailable to production kernel, by booting the
+linux kernel with 'fadump=nocma' instead of 'fadump=on'.
+
 The term 'boot memory' means size of the low memory chunk that is required for
 a kernel to boot successfully when booted with restricted memory.  By default,
 the boot memory size will be the larger of 5% of system RAM or 256MB.
@@ -219,12 +224,16 @@ Things to remember:
    dracut_args --add "network"
 
 4) If FADump is configured to capture vmcore to a remote dump target using SSH
-   or NFS protocol, the network interface is renamed to kdump-<interface-name>
-   if <interface-name> is generic, for example, *eth#, or net#. This problem
-   occurs because the vmcore capture scripts in the initial RAM disk (initrd)
-   add the kdump- prefix to the network interface name to secure persistent
-   naming. As the same initrd is used for production kernel boot, the interface
-   name is changed for the production kernel too.
+   or NFS protocol, the corresponding network interface '<interface-name>' is
+   renamed to 'kdump-<interface-name>', if it is generic (like *eth# or net#).
+   It happens because vmcore capture scripts in the initial RAM disk (initrd)
+   add the 'kdump-' prefix to the network interface name to secure persistent
+   naming. And as capture kernel and production kernel use the same initrd in
+   case of FADump, the interface name is changed for the production kernel too.
+   This is likely to impact network configuration setup for production kernel.
+   So, it is recommended to use a non-generic name for a network interface,
+   before setting up FADump to capture vmcore to a remote dump target based on
+   that network interface, to avoid running into network configuration issues.
 
 Dump Triggering methods:
 
@@ -326,9 +335,14 @@ the original command line completely.
 
 How to disable FADump:
 
-Remove "fadump=on" from kernel cmdline parameters:
+Remove "fadump=on"/"fadump=nocma" from kernel cmdline parameters OR replace
+it with "fadump=off" kernel cmdline parameter:
 
    # grubby --update-kernel=/boot/vmlinuz-`uname -r` --remove-args="fadump=on"
+or
+   # grubby --update-kernel=/boot/vmlinuz-`uname -r` --remove-args="fadump=nocma"
+OR
+   # grubby --update-kernel=/boot/vmlinuz-`uname -r` --args="fadump=off"
 
 If KDump is to be used as the dump capturing mechanism, update the crashkernel
 parameter (Else, remove "crashkernel=" parameter too, using grubby):

SOURCES/gen-kdump-conf.sh

@@ -1,3 +1,12 @@
+#!/bin/bash
+# $1: target arch
+
+
+SED_EXP=""
+
+generate()
+{
+	sed "$SED_EXP" << EOF
 # This file contains a series of commands to perform (in order) in the kdump
 # kernel after a kernel crash in the crash kernel(1st kernel) has happened.
 #
@@ -21,7 +30,7 @@
 #             <mnt>/<path>/%HOST-%DATE/, supports DNS.
 #
 # ssh <user@server>
-#           - Will scp /proc/vmcore to <user@server>:<path>/%HOST-%DATE/,
+#           - Will save /proc/vmcore to <user@server>:<path>/%HOST-%DATE/,
 #             supports DNS.
 #             NOTE: make sure the user has write permissions on the server.
 #
@@ -62,9 +71,9 @@
 #             as the initrd will automatically be populated with a
 #             config file appropriate for the running kernel.
 #             The default core_collector for raw/ssh dump is:
-#             "makedumpfile -F -l --message-level 1 -d 31".
+#             "makedumpfile -F -l --message-level 7 -d 31".
 #             The default core_collector for other targets is:
-#             "makedumpfile -l --message-level 1 -d 31".
+#             "makedumpfile -l --message-level 7 -d 31".
 #
 #             "makedumpfile -F" will create a flattened vmcore.
 #             You need to use "makedumpfile -R" to rearrange the dump data to
@@ -166,10 +175,12 @@
 #ext4 LABEL=/boot
 #ext4 UUID=03138356-5e61-4ab3-b58e-27507ac41937
 #nfs my.server.com:/export/tmp
+#nfs [2001:db8::1:2:3:4]:/export/tmp
 #ssh user@my.server.com
+#ssh user@2001:db8::1:2:3:4
 #sshkey /root/.ssh/kdump_id_rsa
 path /var/crash
-core_collector makedumpfile -l --message-level 1 -d 31
+core_collector makedumpfile -l --message-level 7 -d 31
 #core_collector scp
 #kdump_post /var/crash/scripts/kdump-post.sh
 #kdump_pre /var/crash/scripts/kdump-pre.sh
@@ -181,3 +192,32 @@ core_collector makedumpfile -l --message-level 1 -d 31
 #dracut_args --omit-drivers "cfg80211 snd" --add-drivers "ext2 ext3"
 #fence_kdump_args -p 7410 -f auto -c 0 -i 10
 #fence_kdump_nodes node1 node2
+EOF
+}
+
+update_param()
+{
+	SED_EXP="${SED_EXP}s/^$1.*$/$1 $2/;"
+}
+
+case "$1" in
+aarch64)
+	;;
+i386)
+	;;
+ppc64)
+	;;
+ppc64le)
+	;;
+s390x)
+	update_param core_collector \
+		"makedumpfile -c --message-level 7 -d 31"
+	;;
+x86_64)
+	;;
+*)
+	echo "Warning: Unknown architecture '$1', using default kdump.conf template."
+	;;
+esac
+
+generate

SOURCES/kdump-dep-generator.sh

@@ -4,6 +4,7 @@
 # http://www.freedesktop.org/wiki/Software/systemd/Generators/
 
 . /usr/lib/kdump/kdump-lib.sh
+. /usr/lib/kdump/kdump-logger.sh
 
 # If invokded with no arguments for testing purpose, output to /tmp to
 # avoid overriding the existing.

SOURCES/kdump-lib-initramfs.sh

@@ -1,10 +1,12 @@
 # These variables and functions are useful in 2nd kernel
 
 . /lib/kdump-lib.sh
+. /lib/kdump-logger.sh
 
 KDUMP_PATH="/var/crash"
+KDUMP_LOG_FILE="/run/initramfs/kexec-dmesg.log"
 CORE_COLLECTOR=""
-DEFAULT_CORE_COLLECTOR="makedumpfile -l --message-level 1 -d 31"
+DEFAULT_CORE_COLLECTOR="makedumpfile -l --message-level 7 -d 31"
 DMESG_COLLECTOR="/sbin/vmcore-dmesg"
 FAILURE_ACTION="systemctl reboot -f"
 DATEDIR=`date +%Y-%m-%d-%T`
@@ -20,6 +22,13 @@ KDUMP_POST=""
 NEWROOT="/sysroot"
 OPALCORE="/sys/firmware/opal/mpipl/core"
 
+#initiate the kdump logger
+dlog_init
+if [ $? -ne 0 ]; then
+    echo "failed to initiate the kdump logger."
+    exit 1
+fi
+
 get_kdump_confs()
 {
     local config_opt config_val
@@ -94,34 +103,37 @@ get_kdump_confs()
     fi
 }
 
+# store the kexec kernel log to a file.
+save_log()
+{
+    dmesg -T > $KDUMP_LOG_FILE
+
+    if command -v journalctl > /dev/null; then
+        journalctl -ab >> $KDUMP_LOG_FILE
+    fi
+    chmod 600 $KDUMP_LOG_FILE
+}
+
 # dump_fs <mount point>
 dump_fs()
 {
+    local _exitcode
     local _mp=$1
-    local _dev=$(get_mount_info SOURCE target $_mp -f)
-    local _op=$(get_mount_info OPTIONS target $_mp -f)
+    ddebug "dump_fs _mp=$_mp"
 
-    # If dump path have a corresponding device entry but not mounted, mount it.
-    if [ -n "$_dev" ] || [ "$_dev" == "rootfs" ]; then
-        if ! is_mounted "$_mp"; then
-            echo "kdump: dump target $_dev is not mounted, trying to mount..."
-            mkdir -p $_mp
-            mount -o $_op $_dev $_mp
-
-            if [ $? -ne 0 ]; then
-                echo "kdump: mounting failed (mount point: $_mp, option: $_op)"
-                return 1
-            fi
+    if ! is_mounted "$_mp"; then
+        dinfo "dump path \"$_mp\" is not mounted, trying to mount..."
+        mount --target $_mp
+        if [ $? -ne 0 ]; then
+            derror "failed to dump to \"$_mp\", it's not a mount point!"
+            return 1
         fi
-    else
-        echo "kdump: failed to dump to \"$_mp\", it's not a mount point!"
-        return 1
     fi
 
     # Remove -F in makedumpfile case. We don't want a flat format dump here.
     [[ $CORE_COLLECTOR = *makedumpfile* ]] && CORE_COLLECTOR=`echo $CORE_COLLECTOR | sed -e "s/-F//g"`
 
-    echo "kdump: saving to $_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/"
+    dinfo "saving to $_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/"
 
     mount -o remount,rw $_mp || return 1
     mkdir -p $_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR || return 1
@@ -129,12 +141,29 @@ dump_fs()
     save_vmcore_dmesg_fs ${DMESG_COLLECTOR} "$_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/"
     save_opalcore_fs "$_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/"
 
-    echo "kdump: saving vmcore"
-    $CORE_COLLECTOR /proc/vmcore $_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/vmcore-incomplete || return 1
-    mv $_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/vmcore-incomplete $_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/vmcore
-    sync
+    dinfo "saving vmcore"
+    $CORE_COLLECTOR /proc/vmcore $_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/vmcore-incomplete
+    _exitcode=$?
+    if [ $_exitcode -eq 0 ]; then
+        sync -f "$_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/vmcore-incomplete"
+        _sync_exitcode=$?
+        if [ $_sync_exitcode -eq 0 ]; then
+            mv "$_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/vmcore-incomplete" "$_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/vmcore"
+            dinfo "saving vmcore complete"
+        else
+            derror "sync vmcore failed, _exitcode:$_sync_exitcode"
+            return 1
+        fi
+    else
+        derror "saving vmcore failed, _exitcode:$_exitcode"
+    fi
 
-    echo "kdump: saving vmcore complete"
+    dinfo "saving the $KDUMP_LOG_FILE to $_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/"
+    save_log
+    mv $KDUMP_LOG_FILE $_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/
+    if [ $_exitcode -ne 0 ]; then
+        return 1
+    fi
 
     # improper kernel cmdline can cause the failure of echo, we can ignore this kind of failure
     return 0
@@ -144,19 +173,20 @@ save_vmcore_dmesg_fs() {
     local _dmesg_collector=$1
     local _path=$2
 
-    echo "kdump: saving vmcore-dmesg.txt"
+    dinfo "saving vmcore-dmesg.txt to ${_path}"
     $_dmesg_collector /proc/vmcore > ${_path}/vmcore-dmesg-incomplete.txt
     _exitcode=$?
     if [ $_exitcode -eq 0 ]; then
         mv ${_path}/vmcore-dmesg-incomplete.txt ${_path}/vmcore-dmesg.txt
+        chmod 600 ${_path}/vmcore-dmesg.txt
 
         # Make sure file is on disk. There have been instances where later
         # saving vmcore failed and system rebooted without sync and there
         # was no vmcore-dmesg.txt available.
         sync
-        echo "kdump: saving vmcore-dmesg.txt complete"
+        dinfo "saving vmcore-dmesg.txt complete"
     else
-        echo "kdump: saving vmcore-dmesg.txt failed"
+        derror "saving vmcore-dmesg.txt failed"
     fi
 }
 
@@ -172,43 +202,47 @@ save_opalcore_fs() {
         fi
     fi
 
-    echo "kdump: saving opalcore"
+    dinfo "saving opalcore:$OPALCORE to ${_path}/opalcore"
     cp $OPALCORE ${_path}/opalcore
     if [ $? -ne 0 ]; then
-        echo "kdump: saving opalcore failed"
+        derror "saving opalcore failed"
         return 1
     fi
 
     sync
-    echo "kdump: saving opalcore complete"
+    dinfo "saving opalcore complete"
     return 0
 }
 
 dump_to_rootfs()
 {
 
-    echo "Kdump: trying to bring up rootfs device"
+    dinfo "Trying to bring up rootfs device"
     systemctl start dracut-initqueue
-    echo "Kdump: waiting for rootfs mount, will timeout after 90 seconds"
+    dinfo "Waiting for rootfs mount, will timeout after 90 seconds"
     systemctl start sysroot.mount
 
+    ddebug "NEWROOT=$NEWROOT"
+
     dump_fs $NEWROOT
 }
 
 kdump_emergency_shell()
 {
     echo "PS1=\"kdump:\\\${PWD}# \"" >/etc/profile
+    ddebug "Switching to dracut emergency..."
     /bin/dracut-emergency
     rm -f /etc/profile
 }
 
 do_failure_action()
 {
-    echo "Kdump: Executing failure action $FAILURE_ACTION"
+    dinfo "Executing failure action $FAILURE_ACTION"
     eval $FAILURE_ACTION
 }
 
 do_final_action()
 {
+    dinfo "Executing final action $FINAL_ACTION"
     eval $FINAL_ACTION
 }

SOURCES/kdump-lib.sh

@@ -7,6 +7,7 @@ DEFAULT_PATH="/var/crash/"
 FENCE_KDUMP_CONFIG_FILE="/etc/sysconfig/fence_kdump"
 FENCE_KDUMP_SEND="/usr/libexec/fence_kdump_send"
 FADUMP_ENABLED_SYS_NODE="/sys/kernel/fadump_enabled"
+LVM_CONF="/etc/lvm/lvm.conf"
 
 is_fadump_capable()
 {
@@ -19,13 +20,19 @@ is_fadump_capable()
     return 1
 }
 
-perror_exit() {
-    echo $@ >&2
-    exit 1
+is_squash_available() {
+    for kmodule in squashfs overlay loop; do
+        if [ -z "$KDUMP_KERNELVER" ]; then
+            modprobe --dry-run $kmodule &>/dev/null || return 1
+        else
+            modprobe -S $KDUMP_KERNELVER --dry-run $kmodule &>/dev/null || return 1
+        fi
+    done
 }
 
-perror() {
-    echo $@ >&2
+perror_exit() {
+    derror "$@"
+    exit 1
 }
 
 is_ssh_dump_target()
@@ -56,6 +63,15 @@ is_fs_dump_target()
     egrep -q "^ext[234]|^xfs|^btrfs|^minix" /etc/kdump.conf
 }
 
+is_lvm2_thinp_device()
+{
+    _device_path=$1
+    _lvm2_thin_device=$(lvm lvs -S 'lv_layout=sparse && lv_layout=thin' \
+        --nosuffix --noheadings -o vg_name,lv_name "$_device_path" 2> /dev/null)
+
+    [ -n "$_lvm2_thin_device" ]
+}
+
 strip_comments()
 {
     echo $@ | sed -e 's/\(.*\)#.*/\1/'
@@ -155,6 +171,12 @@ is_dump_to_rootfs()
     grep -E "^(failure_action|default)[[:space:]]dump_to_rootfs" /etc/kdump.conf >/dev/null
 }
 
+is_lvm2_thinp_dump_target()
+{
+    _target=$(get_block_dump_target)
+    [ -n "$_target" ] && is_lvm2_thinp_device "$_target"
+}
+
 get_failure_action_target()
 {
     local _target
@@ -309,9 +331,9 @@ kdump_get_persistent_dev() {
     echo $(get_persistent_dev "$dev")
 }
 
-is_atomic()
+is_ostree()
 {
-    grep -q "ostree" /proc/cmdline
+    test -f /run/ostree-booted
 }
 
 # fixme, try the best to decide whether the ipv6 addr is allocated by slaac or dhcp6
@@ -458,28 +480,33 @@ get_ifcfg_filename() {
     echo -n "${ifcfg_file}"
 }
 
-# returns 0 when omission of watchdog module is desired in dracut_args
+# returns 0 when omission of a module is desired in dracut_args
 # returns 1 otherwise
-is_wdt_mod_omitted() {
-	local dracut_args
-	local ret=1
+is_dracut_mod_omitted() {
+    local dracut_args dracut_mod=$1
 
-	dracut_args=$(grep  "^dracut_args" /etc/kdump.conf)
-	[[ -z $dracut_args ]] && return $ret
+    set -- $(grep  "^dracut_args" /etc/kdump.conf)
+    while [ $# -gt 0 ]; do
+        case $1 in
+            -o|--omit)
+                [[ " ${2//[^[:alnum:]]/ } " ==  *" $dracut_mod "* ]] && return 0
+        esac
+        shift
+    done
 
-	eval set -- $dracut_args
-	while :; do
-		[[ -z $1 ]] && break
-		case $1 in
-			-o|--omit)
-				echo $2 | grep -qw "watchdog"
-				[[ $? == 0 ]] && ret=0
-				break
-		esac
-		shift
-	done
+    return 1
+}
 
-	return $ret
+is_wdt_active() {
+    local active
+
+    [ -d /sys/class/watchdog ] || return 1
+    for dir in /sys/class/watchdog/*; do
+        [ -f "$dir/state" ] || continue
+        active=$(< "$dir/state")
+        [ "$active" =  "active" ] && return 0
+    done
+    return 1
 }
 
 # If "dracut_args" contains "--mount" information, use it
@@ -502,13 +529,26 @@ get_dracut_args_target()
     echo $1 | grep "\-\-mount" | sed "s/.*--mount .\(.*\)/\1/" | cut -d' ' -f1
 }
 
+get_reserved_mem_size()
+{
+	local reserved_mem_size=0
+
+	if is_fadump_capable; then
+		reserved_mem_size=$(< /sys/kernel/fadump/mem_reserved)
+	else
+		reserved_mem_size=$(< /sys/kernel/kexec_crash_size)
+	fi
+
+	echo "$reserved_mem_size"
+}
+
 check_crash_mem_reserved()
 {
     local mem_reserved
 
-    mem_reserved=$(cat /sys/kernel/kexec_crash_size)
+    mem_reserved=$(get_reserved_mem_size)
     if [ $mem_reserved -eq 0 ]; then
-        echo "No memory reserved for crash kernel"
+        derror "No memory reserved for crash kernel"
         return 1
     fi
 
@@ -518,7 +558,7 @@ check_crash_mem_reserved()
 check_kdump_feasibility()
 {
     if [ ! -e /sys/kernel/kexec_crash_loaded ]; then
-        echo "Kdump is not supported on this kernel"
+        derror "Kdump is not supported on this kernel"
         return 1
     fi
     check_crash_mem_reserved
@@ -528,7 +568,7 @@ check_kdump_feasibility()
 check_current_kdump_status()
 {
     if [ ! -f /sys/kernel/kexec_crash_loaded ];then
-        echo "Perhaps CONFIG_CRASH_DUMP is not enabled in kernel"
+        derror "Perhaps CONFIG_CRASH_DUMP is not enabled in kernel"
         return 1
     fi
 
@@ -611,11 +651,16 @@ is_secure_boot_enforced()
     local secure_boot_file setup_mode_file
     local secure_boot_byte setup_mode_byte
 
-    # On powerpc, os-secureboot-enforcing DT property indicates whether secureboot
-    # is enforced. Return success, if it is found.
+    # On powerpc, secure boot is enforced if:
+    #   host secure boot: /ibm,secure-boot/os-secureboot-enforcing DT property exists
+    #   guest secure boot: /ibm,secure-boot >= 2
     if [ -f /proc/device-tree/ibm,secureboot/os-secureboot-enforcing ]; then
 		return 0
     fi
+    if [ -f /proc/device-tree/ibm,secure-boot ] && \
+       [ $(lsprop /proc/device-tree/ibm,secure-boot | tail -1) -ge 2 ]; then
+		return 0
+    fi
 
     # Detect secure boot on x86 and arm64
     secure_boot_file=$(find /sys/firmware/efi/efivars -name SecureBoot-* 2>/dev/null)
@@ -656,8 +701,7 @@ prepare_kexec_args()
             found_elf_args=`echo $kexec_args | grep elf32-core-headers`
             if [ -n "$found_elf_args" ]
             then
-                echo -n "Warning: elf32-core-headers overrides correct elf64 setting"
-                echo
+                dwarn "Warning: elf32-core-headers overrides correct elf64 setting"
             else
                 kexec_args="$kexec_args --elf64-core-headers"
             fi
@@ -669,27 +713,151 @@ prepare_kexec_args()
             fi
         fi
     fi
+
+    # For secureboot enabled machines, use new kexec file based syscall.
+    # Old syscall will always fail as it does not have capability to do
+    # kernel signature verification.
+    if is_secure_boot_enforced; then
+        dinfo "Secure Boot is enabled. Using kexec file based syscall."
+        kexec_args="$kexec_args -s"
+    fi
+
     echo $kexec_args
 }
 
-check_boot_dir()
+# prepare_kdump_kernel <kdump_kernelver>
+# This function return kdump_kernel given a kernel version.
+prepare_kdump_kernel()
 {
-    local kdump_bootdir=$1
-    #If user specify a boot dir for kdump kernel, let's use it. Otherwise
-    #check whether it's a atomic host. If yes parse the subdirectory under
-    #/boot; If not just find it under /boot.
-    if [ -n "$kdump_bootdir" ]; then
-        echo "$kdump_bootdir"
-        return
+    local kdump_kernelver=$1
+    local dir img boot_dirlist boot_imglist kdump_kernel machine_id
+    read -r machine_id < /etc/machine-id
+
+    boot_dirlist=${KDUMP_BOOTDIR:-"/boot /boot/efi /efi /"}
+    boot_imglist="$KDUMP_IMG-$kdump_kernelver$KDUMP_IMG_EXT $machine_id/$kdump_kernelver/$KDUMP_IMG"
+
+    # The kernel of OSTree based systems is not in the standard locations.
+    if is_ostree; then
+        boot_dirlist="$(echo /boot/ostree/*) $boot_dirlist"
     fi
 
-    if ! is_atomic || [ "$(uname -m)" = "s390x" ]; then
-        kdump_bootdir="/boot"
-    else
-        eval $(cat /proc/cmdline| grep "BOOT_IMAGE" | cut -d' ' -f1)
-        kdump_bootdir="/boot"$(dirname $BOOT_IMAGE)
+    # Use BOOT_IMAGE as reference if possible, strip the GRUB root device prefix in (hd0,gpt1) format
+    boot_img="$(grep -P -o '^BOOT_IMAGE=(\S+)' /proc/cmdline | sed "s/^BOOT_IMAGE=\((\S*)\)\?\(\S*\)/\2/")"
+    if [[ "$boot_img" == *"$kdump_kernelver" ]]; then
+        boot_imglist="$boot_img $boot_imglist"
     fi
-    echo $kdump_bootdir
+
+    for dir in $boot_dirlist; do
+        for img in $boot_imglist; do
+            if [[ -f "$dir/$img" ]]; then
+                kdump_kernel=$(echo "$dir/$img" | tr -s '/')
+                break 2
+            fi
+        done
+    done
+    echo "$kdump_kernel"
+}
+
+#
+# Detect initrd and kernel location, results are stored in global enviromental variables:
+# KDUMP_BOOTDIR, KDUMP_KERNELVER, KDUMP_KERNEL, DEFAULT_INITRD, and KDUMP_INITRD
+#
+# Expectes KDUMP_BOOTDIR, KDUMP_IMG, KDUMP_IMG_EXT, KDUMP_KERNELVER to be loaded from config already
+# and will prefer already set values so user can specify custom kernel/initramfs location
+#
+prepare_kdump_bootinfo()
+{
+    local boot_initrdlist nondebug_kernelver debug_kernelver
+    local default_initrd_base var_target_initrd_dir
+
+    if [[ -z $KDUMP_KERNELVER ]]; then
+        KDUMP_KERNELVER=$(uname -r)
+
+        # Fadump uses the regular bootloader, unlike kdump. So, use the same version
+        # for default kernel and capture kernel unless specified explicitly with
+        # KDUMP_KERNELVER option.
+        if ! is_fadump_capable; then
+            nondebug_kernelver=$(sed -n -e 's/\(.*\)+debug$/\1/p' <<< "$KDUMP_KERNELVER")
+        fi
+    fi
+
+    # Use nondebug kernel if possible, because debug kernel will consume more memory and may oom.
+    if [[ -n $nondebug_kernelver ]]; then
+        dinfo "Trying to use $nondebug_kernelver."
+        debug_kernelver=$KDUMP_KERNELVER
+        KDUMP_KERNELVER=$nondebug_kernelver
+    fi
+
+    KDUMP_KERNEL=$(prepare_kdump_kernel "$KDUMP_KERNELVER")
+
+    if ! [[ -e $KDUMP_KERNEL ]]; then
+        if [[ -n $debug_kernelver ]]; then
+            dinfo "Fallback to using debug kernel"
+            KDUMP_KERNELVER=$debug_kernelver
+            KDUMP_KERNEL=$(prepare_kdump_kernel "$KDUMP_KERNELVER")
+        fi
+    fi
+
+    if ! [[ -e $KDUMP_KERNEL ]]; then
+        derror "Failed to detect kdump kernel location"
+        return 1
+    fi
+
+    if [[ "$KDUMP_KERNEL" == *"+debug" ]]; then
+        dwarn "Using debug kernel, you may need to set a larger crashkernel than the default value."
+    fi
+
+    # Set KDUMP_BOOTDIR to where kernel image is stored
+    KDUMP_BOOTDIR=$(dirname "$KDUMP_KERNEL")
+
+    # Default initrd should just stay aside of kernel image, try to find it in KDUMP_BOOTDIR
+    boot_initrdlist="initramfs-$KDUMP_KERNELVER.img initrd"
+    for initrd in $boot_initrdlist; do
+        if [[ -f "$KDUMP_BOOTDIR/$initrd" ]]; then
+            default_initrd_base="$initrd"
+            DEFAULT_INITRD="$KDUMP_BOOTDIR/$default_initrd_base"
+            break
+        fi
+    done
+
+    # Create kdump initrd basename from default initrd basename
+    # initramfs-5.7.9-200.fc32.x86_64.img => initramfs-5.7.9-200.fc32.x86_64kdump.img
+    # initrd => initrdkdump
+    if [[ -z $default_initrd_base ]]; then
+        kdump_initrd_base=initramfs-${KDUMP_KERNELVER}kdump.img
+    elif [[ $default_initrd_base == *.* ]]; then
+        kdump_initrd_base=${default_initrd_base%.*}kdump.${DEFAULT_INITRD##*.}
+    else
+        kdump_initrd_base=${default_initrd_base}kdump
+    fi
+
+    # Place kdump initrd in $(/var/lib/kdump) if $(KDUMP_BOOTDIR) not writable
+    if [[ ! -w $KDUMP_BOOTDIR ]]; then
+        var_target_initrd_dir="/var/lib/kdump"
+        mkdir -p "$var_target_initrd_dir"
+        KDUMP_INITRD="$var_target_initrd_dir/$kdump_initrd_base"
+    else
+        KDUMP_INITRD="$KDUMP_BOOTDIR/$kdump_initrd_base"
+    fi
+}
+
+get_watchdog_drvs()
+{
+    local _wdtdrvs _drv _dir
+
+    for _dir in /sys/class/watchdog/*; do
+        # device/modalias will return driver of this device
+        [[ -f "$_dir/device/modalias" ]] || continue
+        _drv=$(< "$_dir/device/modalias")
+        _drv=$(modprobe --set-version "$KDUMP_KERNELVER" -R $_drv 2>/dev/null)
+        for i in $_drv; do
+            if ! [[ " $_wdtdrvs " == *" $i "* ]]; then
+                _wdtdrvs="$_wdtdrvs $i"
+            fi
+        done
+    done
+
+    echo $_wdtdrvs
 }
 
 #
@@ -734,12 +902,212 @@ prepare_cmdline()
         cmdline=$(append_cmdline "${cmdline}" disable_cpu_apicid ${id})
     fi
 
-    # Disable efifb if hyperv_fb is in use, hyperv_fb will relocate the framebuffer
-    # but kexec_file_load always use original screen_info and in second kernel efifb
-    # will try to access an invalid framebuffer address
-    if [ -d /sys/module/hyperv_fb ]; then
-        cmdline=$(append_cmdline "$cmdline" "video=efifb:off")
-    fi
+    # If any watchdog is used, set it's pretimeout to 0. pretimeout let
+    # watchdog panic the kernel first, and reset the system after the
+    # panic. If the system is already in kdump, panic is not helpful
+    # and only increase the chance of watchdog failure.
+    for i in $(get_watchdog_drvs); do
+        cmdline+=" $i.pretimeout=0"
+
+        if [[ $i == hpwdt ]]; then
+            # hpwdt have a special parameter kdumptimeout, is's only suppose
+            # to be set to non-zero in first kernel. In kdump, non-zero
+            # value could prevent the watchdog from resetting the system.
+            cmdline+=" $i.kdumptimeout=0"
+        fi
+    done
 
     echo ${cmdline}
 }
+
+#get system memory size in the unit of GB
+get_system_size()
+{
+    result=$(cat /proc/iomem  | grep "System RAM" | awk -F ":" '{ print $1 }' | tr [:lower:] [:upper:] | paste -sd+)
+    result="+$result"
+    # replace '-' with '+0x' and '+' with '-0x'
+    sum=$( echo $result | sed -e 's/-/K0x/g' | sed -e 's/+/-0x/g' | sed -e 's/K/+/g' )
+    size=$(printf "%d\n" $(($sum)))
+
+    # in MB unit
+    let size=$size/1024/1024
+    # since RHEL-8.5 kernel round up total memory to 128M, so should user space
+    let size=($size+127)/128
+    let size=$size*128
+    # in GB unit
+    let size=$size/1024
+
+    echo $size
+}
+
+get_recommend_size()
+{
+    local mem_size=$1
+    local _ck_cmdline=$2
+    local OLDIFS="$IFS"
+
+    last_sz=""
+    last_unit=""
+
+    start=${_ck_cmdline: :1}
+    if [ $mem_size -lt $start ]; then
+        echo "0M"
+        return
+    fi
+    IFS=','
+    for i in $_ck_cmdline; do
+        end=$(echo $i | awk -F "-" '{ print $2 }' | awk -F ":" '{ print $1 }')
+        recommend=$(echo $i | awk -F "-" '{ print $2 }' | awk -F ":" '{ print $2 }')
+        size=${end: : -1}
+        unit=${end: -1}
+        if [ $unit == 'T' ]; then
+            let size=$size*1024
+        fi
+        if [ $mem_size -lt $size ]; then
+            echo $recommend
+            IFS="$OLDIFS"
+            return
+        fi
+    done
+    IFS="$OLDIFS"
+}
+
+# return recommended size based on current system RAM size
+kdump_get_arch_recommend_size()
+{
+    if ! [[ -r "/proc/iomem" ]] ; then
+        echo "Error, can not access /proc/iomem."
+        return 1
+    fi
+    arch=$(lscpu | grep Architecture | awk -F ":" '{ print $2 }' | tr [:lower:] [:upper:])
+
+    if [ $arch == "X86_64" ] || [ $arch == "S390X" ]; then
+        ck_cmdline="1G-4G:160M,4G-64G:192M,64G-1T:256M,1T-:512M"
+    elif [ $arch == "AARCH64" ]; then
+        ck_cmdline="2G-:448M"
+    elif [ $arch == "PPC64LE" ]; then
+        if is_fadump_capable; then
+            ck_cmdline="4G-16G:768M,16G-64G:1G,64G-128G:2G,128G-1T:4G,1T-2T:6G,2T-4T:12G,4T-8T:20G,8T-16T:36G,16T-32T:64G,32T-64T:128G,64T-:180G"
+        else
+            ck_cmdline="2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G"
+        fi
+    fi
+
+    ck_cmdline=$(echo $ck_cmdline | sed -e 's/-:/-102400T:/g')
+    sys_mem=$(get_system_size)
+    result=$(get_recommend_size $sys_mem "$ck_cmdline")
+    echo $result
+    return 0
+}
+
+# Print all underlying crypt devices of a block device
+# print nothing if device is not on top of a crypt device
+# $1: the block device to be checked in maj:min format
+get_luks_crypt_dev()
+{
+    local _type
+
+    [[ -b /dev/block/$1 ]] || return 1
+
+    _type=$(blkid -u filesystem,crypto -o export -- "/dev/block/$1" | \
+            sed -n -E "s/^TYPE=(.*)$/\1/p")
+    [[ $_type == "crypto_LUKS" ]] && echo $1
+
+    for _x in /sys/dev/block/$1/slaves/*; do
+        [[ -f $_x/dev ]] || continue
+        [[ $_x/subsystem -ef /sys/class/block ]] || continue
+        get_luks_crypt_dev "$(< "$_x/dev")"
+    done
+}
+
+# kdump_get_maj_min <device>
+# Prints the major and minor of a device node.
+# Example:
+# $ get_maj_min /dev/sda2
+# 8:2
+kdump_get_maj_min() {
+    local _majmin
+    _majmin="$(stat -L -c '%t:%T' "$1" 2> /dev/null)"
+    printf "%s" "$((0x${_majmin%:*})):$((0x${_majmin#*:}))"
+}
+
+get_all_kdump_crypt_dev()
+{
+    local _dev _crypt
+
+    for _dev in $(get_block_dump_target); do
+        _crypt=$(get_luks_crypt_dev $(kdump_get_maj_min "$_dev"))
+        [[ -n "$_crypt" ]] && echo $_crypt
+    done
+}
+
+check_vmlinux()
+{
+    # Use readelf to check if it's a valid ELF
+    readelf -h $1 &>/dev/null || return 1
+}
+
+get_vmlinux_size()
+{
+    local size=0
+
+    while read _type _offset _virtaddr _physaddr _fsize _msize _flg _aln; do
+        size=$(( $size + $_msize ))
+    done <<< $(readelf -l -W $1 | grep "^  LOAD" 2>/dev/stderr)
+
+    echo $size
+}
+
+try_decompress()
+{
+    # The obscure use of the "tr" filter is to work around older versions of
+    # "grep" that report the byte offset of the line instead of the pattern.
+
+    # Try to find the header ($1) and decompress from here
+    for pos in `tr "$1\n$2" "\n$2=" < "$4" | grep -abo "^$2"`
+    do
+        if ! type -P $3 > /dev/null; then
+            ddebug "Signiature detected but '$3' is missing, skip this decompressor"
+            break
+        fi
+
+        pos=${pos%%:*}
+        tail -c+$pos "$img" | $3 > $5 2> /dev/null
+        if check_vmlinux $5; then
+            ddebug "Kernel is extracted with '$3'"
+            return 0
+        fi
+    done
+
+    return 1
+}
+
+# Borrowed from linux/scripts/extract-vmlinux
+get_kernel_size()
+{
+    # Prepare temp files:
+    local img=$1 tmp=$(mktemp /tmp/vmlinux-XXX)
+    trap "rm -f $tmp" 0
+
+    # Try to check if it's a vmlinux already
+    check_vmlinux $img && get_vmlinux_size $img && return 0
+
+    # That didn't work, so retry after decompression.
+    try_decompress '\037\213\010' xy    gunzip    $img $tmp || \
+    try_decompress '\3757zXZ\000' abcde unxz      $img $tmp || \
+    try_decompress 'BZh'          xy    bunzip2   $img $tmp || \
+    try_decompress '\135\0\0\0'   xxx   unlzma    $img $tmp || \
+    try_decompress '\211\114\132' xy    'lzop -d' $img $tmp || \
+    try_decompress '\002!L\030'   xxx   'lz4 -d'  $img $tmp || \
+    try_decompress '(\265/\375'   xxx   unzstd    $img $tmp
+
+    # Finally check for uncompressed images or objects:
+    [[ $? -eq 0 ]] && get_vmlinux_size $tmp && return 0
+
+    # Fallback to use iomem
+    local _size=0
+    for _seg in $(cat /proc/iomem  | grep -E "Kernel (code|rodata|data|bss)" | cut -d ":" -f 1); do
+	    _size=$(( $_size + 0x${_seg#*-} - 0x${_seg%-*} ))
+    done
+    echo $_size
+}

SOURCES/kdump-logger.sh

@@ -0,0 +1,348 @@
+#!/bin/bash
+#
+# This comes from the dracut-logger.sh
+#
+# The logger defined 4 logging levels:
+#   - ddebug (4)
+#     The DEBUG Level designates fine-grained informational events that are most
+#     useful to debug an application.
+#   - dinfo (3)
+#     The INFO level designates informational messages that highlight the
+#     progress of the application at coarse-grained level.
+#   - dwarn (2)
+#     The WARN level designates potentially harmful situations.
+#   - derror (1)
+#     The ERROR level designates error events that might still allow the
+#     application to continue running.
+#
+# Logging is controlled by following global variables:
+#   - @var kdump_stdloglvl - logging level to standard error (console output)
+#   - @var kdump_sysloglvl - logging level to syslog (by logger command)
+#   - @var kdump_kmsgloglvl - logging level to /dev/kmsg (only for boot-time)
+#
+# If any of the variables is not set, the function dlog_init() sets it to default:
+#   - In the first kernel:
+#     - @var kdump_stdloglvl = 3 (info)
+#     - @var kdump_sysloglvl = 0 (no logging)
+#     - @var kdump_kmsgloglvl = 0 (no logging)
+#
+#   -In the second kernel:
+#    - @var kdump_stdloglvl = 0 (no logging)
+#    - @var kdump_sysloglvl = 3 (info)
+#    - @var kdump_kmsgloglvl = 0 (no logging)
+#
+# First of all you have to start with dlog_init() function which initializes
+# required variables. Don't call any other logging function before that one!
+#
+
+# Define vairables for the log levels in this module.
+kdump_stdloglvl=""
+kdump_sysloglvl=""
+kdump_kmsgloglvl=""
+
+# The dracut-lib.sh is only available in the second kernel, and it won't
+# be used in the first kernel because the dracut-lib.sh is invisible in
+# the first kernel.
+if [ -f /lib/dracut-lib.sh ]; then
+    . /lib/dracut-lib.sh
+fi
+
+# @brief Get the log level from kernel command line.
+# @retval 1 if something has gone wrong
+# @retval 0 on success.
+#
+get_kdump_loglvl()
+{
+    (type -p getarg) && kdump_sysloglvl=$(getarg rd.kdumploglvl)
+    [ -z "$kdump_sysloglvl" ] && return 1;
+
+    (type -p isdigit) && isdigit $kdump_sysloglvl
+    [ $? -ne 0 ] && return 1;
+
+    return 0
+}
+
+# @brief Check the log level.
+# @retval 1 if something has gone wrong
+# @retval 0 on success.
+#
+check_loglvl()
+{
+    case "$1" in
+        0|1|2|3|4)
+            return 0
+           ;;
+        *)
+            return 1
+            ;;
+        esac
+}
+
+# @brief Initializes Logger.
+# @retval 1 if something has gone wrong
+# @retval 0 on success.
+#
+dlog_init() {
+    local ret=0; local errmsg
+
+    if [ -s /proc/vmcore ];then
+        get_kdump_loglvl
+        if [ $? -ne 0 ];then
+            logger -t "kdump[$$]" -p warn -- "Kdump is using the default log level(3)."
+            kdump_sysloglvl=3
+        fi
+        kdump_stdloglvl=0
+        kdump_kmsgloglvl=0
+    else
+        kdump_stdloglvl=$KDUMP_STDLOGLVL
+        kdump_sysloglvl=$KDUMP_SYSLOGLVL
+        kdump_kmsgloglvl=$KDUMP_KMSGLOGLVL
+    fi
+
+    [ -z "$kdump_stdloglvl" ] && kdump_stdloglvl=3
+    [ -z "$kdump_sysloglvl" ] && kdump_sysloglvl=0
+    [ -z "$kdump_kmsgloglvl" ] && kdump_kmsgloglvl=0
+
+    for loglvl in "$kdump_stdloglvl" "$kdump_kmsgloglvl" "$kdump_sysloglvl"; do
+        check_loglvl "$loglvl"
+        if [ $? -ne 0 ]; then
+            echo "Illegal log level: $kdump_stdloglvl $kdump_kmsgloglvl $kdump_sysloglvl"
+            return 1
+        fi
+    done
+
+    # Skip initialization if it's already done.
+    [ -n "$kdump_maxloglvl" ] && return 0
+
+    if [[ $UID -ne 0 ]]; then
+        kdump_kmsgloglvl=0
+        kdump_sysloglvl=0
+    fi
+
+    if [[ $kdump_sysloglvl -gt 0 ]]; then
+        if [[ -d /run/systemd/journal ]] \
+            && type -P systemd-cat &>/dev/null \
+            && systemctl --quiet is-active systemd-journald.socket &>/dev/null; then
+            readonly _systemdcatfile="/var/tmp/systemd-cat"
+            mkfifo "$_systemdcatfile" &>/dev/null
+            readonly _dlogfd=15
+            systemd-cat -t 'kdump' --level-prefix=true <"$_systemdcatfile" &
+            exec 15>"$_systemdcatfile"
+        elif ! [ -S /dev/log -a -w /dev/log ] || ! command -v logger >/dev/null; then
+            # We cannot log to syslog, so turn this facility off.
+            kdump_kmsgloglvl=$kdump_sysloglvl
+            kdump_sysloglvl=0
+            ret=1
+            errmsg="No '/dev/log' or 'logger' included for syslog logging"
+        fi
+    fi
+
+    local lvl; local maxloglvl_l=0
+    for lvl in $kdump_stdloglvl $kdump_sysloglvl $kdump_kmsgloglvl; do
+        [[ $lvl -gt $maxloglvl_l ]] && maxloglvl_l=$lvl
+    done
+    readonly kdump_maxloglvl=$maxloglvl_l
+    export kdump_maxloglvl
+
+    if [[ $kdump_stdloglvl -lt 4 ]] && [[ $kdump_kmsgloglvl -lt 4 ]] && [[ $kdump_sysloglvl -lt 4 ]]; then
+        unset ddebug
+        ddebug() { :; };
+    fi
+
+    if [[ $kdump_stdloglvl -lt 3 ]] && [[ $kdump_kmsgloglvl -lt 3 ]] && [[ $kdump_sysloglvl -lt 3 ]]; then
+        unset dinfo
+        dinfo() { :; };
+    fi
+
+    if [[ $kdump_stdloglvl -lt 2 ]] && [[ $kdump_kmsgloglvl -lt 2 ]] && [[ $kdump_sysloglvl -lt 2 ]]; then
+        unset dwarn
+        dwarn() { :; };
+        unset dwarning
+        dwarning() { :; };
+    fi
+
+    if [[ $kdump_stdloglvl -lt 1 ]] && [[ $kdump_kmsgloglvl -lt 1 ]] && [[ $kdump_sysloglvl -lt 1 ]]; then
+        unset derror
+        derror() { :; };
+    fi
+
+    [ -n "$errmsg" ] && derror "$errmsg"
+
+    return $ret
+}
+
+## @brief Converts numeric level to logger priority defined by POSIX.2.
+#
+# @param lvl Numeric logging level in range from 1 to 4.
+# @retval 1 if @a lvl is out of range.
+# @retval 0 if @a lvl is correct.
+# @result Echoes logger priority.
+_lvl2syspri() {
+    case "$1" in
+        1) echo error;;
+        2) echo warning;;
+        3) echo info;;
+        4) echo debug;;
+        *) return 1;;
+    esac
+}
+
+## @brief Converts logger numeric level to syslog log level
+#
+# @param lvl Numeric logging level in range from 1 to 4.
+# @retval 1 if @a lvl is out of range.
+# @retval 0 if @a lvl is correct.
+# @result Echoes kernel console numeric log level
+#
+# Conversion is done as follows:
+#
+# <tt>
+#   none     -> LOG_EMERG (0)
+#   none     -> LOG_ALERT (1)
+#   none     -> LOG_CRIT (2)
+#   ERROR(1) -> LOG_ERR (3)
+#   WARN(2)  -> LOG_WARNING (4)
+#   none     -> LOG_NOTICE (5)
+#   INFO(3)  -> LOG_INFO (6)
+#   DEBUG(4) -> LOG_DEBUG (7)
+# </tt>
+#
+# @see /usr/include/sys/syslog.h
+_dlvl2syslvl() {
+    local lvl
+
+    case "$1" in
+        1) lvl=3;;
+        2) lvl=4;;
+        3) lvl=6;;
+        4) lvl=7;;
+        *) return 1;;
+    esac
+
+    # The number is constructed by multiplying the facility by 8 and then
+    # adding the level.
+    # About The Syslog Protocol, please refer to the RFC5424 for more details.
+    echo $((24+$lvl))
+}
+
+## @brief Prints to stderr, to syslog and/or /dev/kmsg given message with
+#  given level (priority).
+#
+# @param lvl Numeric logging level.
+# @param msg Message.
+# @retval 0 It's always returned, even if logging failed.
+#
+# @note This function is not supposed to be called manually. Please use
+# dinfo(), ddebug(), or others instead which wrap this one.
+#
+# This is core logging function which logs given message to standard error
+# and/or syslog (with POSIX shell command <tt>logger</tt>) and/or to /dev/kmsg.
+# The format is following:
+#
+# <tt>X: some message</tt>
+#
+# where @c X is the first letter of logging level. See module description for
+# details on that.
+#
+# Message to syslog is sent with tag @c kdump. Priorities are mapped as
+# following:
+#   - @c ERROR to @c error
+#   - @c WARN to @c warning
+#   - @c INFO to @c info
+#   - @c DEBUG to @c debug
+_do_dlog() {
+    local lvl="$1"; shift
+    local msg="$*"
+
+    [[ $lvl -le $kdump_stdloglvl ]] && printf -- 'kdump: %s\n' "$msg" >&2
+
+    if [[ $lvl -le $kdump_sysloglvl ]]; then
+        if [[ "$_dlogfd" ]]; then
+            printf -- "<%s>%s\n" "$(($(_dlvl2syslvl $lvl) & 7))" "$msg" >&$_dlogfd
+        else
+            logger -t "kdump[$$]" -p $(_lvl2syspri $lvl) -- "$msg"
+        fi
+    fi
+
+    [[ $lvl -le $kdump_kmsgloglvl ]] && \
+        echo "<$(_dlvl2syslvl $lvl)>kdump[$$] $msg" >/dev/kmsg
+}
+
+## @brief Internal helper function for _do_dlog()
+#
+# @param lvl Numeric logging level.
+# @param msg Message.
+# @retval 0 It's always returned, even if logging failed.
+#
+# @note This function is not supposed to be called manually. Please use
+# dinfo(), ddebug(), or others instead which wrap this one.
+#
+# This function calls _do_dlog() either with parameter msg, or if
+# none is given, it will read standard input and will use every line as
+# a message.
+#
+# This enables:
+# dwarn "This is a warning"
+# echo "This is a warning" | dwarn
+dlog() {
+    [ -z "$kdump_maxloglvl" ] && return 0
+    [[ $1 -le $kdump_maxloglvl ]] || return 0
+
+    if [[ $# -gt 1 ]]; then
+        _do_dlog "$@"
+    else
+        while read line || [ -n "$line" ]; do
+            _do_dlog "$1" "$line"
+        done
+    fi
+}
+
+## @brief Logs message at DEBUG level (4)
+#
+# @param msg Message.
+# @retval 0 It's always returned, even if logging failed.
+ddebug() {
+    set +x
+    dlog 4 "$@"
+    [ -n "$debug" ] && set -x || :
+}
+
+## @brief Logs message at INFO level (3)
+#
+# @param msg Message.
+# @retval 0 It's always returned, even if logging failed.
+dinfo() {
+    set +x
+    dlog 3 "$@"
+    [ -n "$debug" ] && set -x || :
+}
+
+## @brief Logs message at WARN level (2)
+#
+# @param msg Message.
+# @retval 0 It's always returned, even if logging failed.
+dwarn() {
+    set +x
+    dlog 2 "$@"
+    [ -n "$debug" ] && set -x || :
+}
+
+## @brief It's an alias to dwarn() function.
+#
+# @param msg Message.
+# @retval 0 It's always returned, even if logging failed.
+dwarning() {
+    set +x
+    dwarn "$@"
+    [ -n "$debug" ] && set -x || :
+}
+
+## @brief Logs message at ERROR level (1)
+#
+# @param msg Message.
+# @retval 0 It's always returned, even if logging failed.
+derror() {
+    set +x
+    dlog 1 "$@"
+    [ -n "$debug" ] && set -x || :
+}

SOURCES/kdump-migrate-action.sh

@@ -0,0 +1,8 @@
+#!/bin/sh
+
+systemctl is-active kdump
+if [ $? -ne 0 ]; then
+        exit 0
+fi
+
+/usr/lib/kdump/kdump-restart.sh

SOURCES/kdump-restart.sh

@@ -0,0 +1,8 @@
+#!/bin/bash
+export PATH="$PATH:/usr/bin:/usr/sbin"
+
+exec >>/var/log/kdump-migration.log 2>&1
+
+echo "kdump: Partition Migration detected. Rebuilding initramfs image to reload."
+/usr/bin/kdumpctl rebuild
+/usr/bin/kdumpctl reload

SOURCES/kdump.conf.5

@@ -85,9 +85,9 @@ for the running kernel.
 .PP
 Note 1: About default core collector:
 The default core_collector for raw/ssh dump is:
-"makedumpfile -F -l --message-level 1 -d 31".
+"makedumpfile -F -l --message-level 7 -d 31".
 The default core_collector for other targets is:
-"makedumpfile -l --message-level 1 -d 31".
+"makedumpfile -l --message-level 7 -d 31".
 Even if core_collector option is commented out in kdump.conf, makedumpfile
 is the default core collector and kdump uses it internally.
 If one does not want makedumpfile as default core_collector, then they
@@ -98,6 +98,11 @@ vmcore.flat, you will need to use "makedumpfile -R" to rearrange the
 dump data from standard input to a normal dumpfile (readable with analysis
 tools).
 ie. "makedumpfile -R vmcore < vmcore.flat"
+.PP
+Note 3: If specified core_collector simply copy the vmcore file to the
+dump target (eg: cp, scp), the vmcore could be significantly large.
+Please make sure the dump target has enough space, at leaset larger
+than the system's RAM.
 
 .RE
 
@@ -113,8 +118,11 @@ All files under /etc/kdump/post.d are collectively sorted
 and executed in lexical order, before binary or script
 specified kdump_post parameter is executed.
 .PP
-Note that scripts written for use with this directive must use
-the /bin/bash interpreter.
+Note that scripts written for use with this directive must use the /bin/bash
+interpreter. And since these scripts run in kdump enviroment, the reference to
+the storage or network device in the scripts should adhere to the section
+\'Supported dump target types and requirements\' in kexec-kdump-howto.txt.
+
 .RE
 
 .B kdump_pre <binary | script>
@@ -134,8 +142,11 @@ kdump_pre parameter is executed.
 Even if the binary or script in /etc/kdump/pre.d directory
 returns non 0 exit status, the processing is continued.
 .PP
-Note that scripts written for this directive must use
-the /bin/bash interpreter.
+Note that scripts written for use with this directive must use the /bin/bash
+interpreter. And since these scripts run in kdump enviroment, the reference to
+the storage or network device in the scripts should adhere to the section
+\'Supported dump target types and requirements\' in kexec-kdump-howto.txt.
+
 .RE
 
 .B extra_bins <binaries | shell scripts>
@@ -307,11 +318,11 @@ Above will effectively be translated to:
 cp --sparse=always /proc/vmcore <dest-path>/vmcore
 .TP
 ex2.
-core_collector "makedumpfile -l --message-level 1 -d 31"
+core_collector "makedumpfile -l --message-level 7 -d 31"
 
 Above will effectively be translated to:
 
-makedumpfile -l --message-level 1 -d 31 /proc/vmcore <dest-path>/vmcore
+makedumpfile -l --message-level 7 -d 31 /proc/vmcore <dest-path>/vmcore
 .PP
 For dump targets like raw and ssh, in general, core collector should expect
 one argument (source file) and should output the processed core on standard
@@ -328,11 +339,11 @@ Above will effectively be translated to.
 cat /proc/vmcore | dd of=<target-device>
 .TP
 ex4.
-core_collector "makedumpfile -F -l --message-level 1 -d 31"
+core_collector "makedumpfile -F -l --message-level 7 -d 31"
 
 Above will effectively be translated to.
 
-makedumpfile -F -l --message-level 1 -d 31 | dd of=<target-device>
+makedumpfile -F -l --message-level 7 -d 31 | dd of=<target-device>
 .PP
 ssh dumps examples
 .TP
@@ -344,11 +355,11 @@ Above will effectively be translated to.
 cat /proc/vmcore | ssh <options> <remote-location> "dd of=path/vmcore"
 .TP
 ex6.
-core_collector "makedumpfile -F -l --message-level 1 -d 31"
+core_collector "makedumpfile -F -l --message-level 7 -d 31"
 
 Above will effectively be translated to.
 
-makedumpfile -F -l --message-level 1 -d 31 | ssh <options> <remote-location> "dd of=path/vmcore"
+makedumpfile -F -l --message-level 7 -d 31 | ssh <options> <remote-location> "dd of=path/vmcore"
 
 There is one exception to standard output rule for ssh dumps. And that is
 scp. As scp can handle ssh destinations for file transfers, one can

SOURCES/kdump.service

@@ -2,6 +2,7 @@
 Description=Crash recovery kernel arming
 After=network.target network-online.target remote-fs.target basic.target
 DefaultDependencies=no
+ConditionKernelCommandLine=crashkernel
 
 [Service]
 Type=oneshot

SOURCES/kdump.sysconfig

@@ -17,7 +17,7 @@ KDUMP_COMMANDLINE=""
 # This variable lets us remove arguments from the current kdump commandline
 # as taken from either KDUMP_COMMANDLINE above, or from /proc/cmdline
 # NOTE: some arguments such as crashkernel will always be removed
-KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug quiet log_buf_len"
+KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug quiet log_buf_len ignition.firstboot"
 
 # This variable lets us append arguments to the current kdump commandline
 # after processed by KDUMP_COMMANDLINE_REMOVE
@@ -35,3 +35,19 @@ KEXEC_ARGS=""
 
 #What is the image type used for kdump
 KDUMP_IMG="vmlinuz"
+
+# Logging is controlled by following variables in the first kernel:
+#   - @var KDUMP_STDLOGLVL - logging level to standard error (console output)
+#   - @var KDUMP_SYSLOGLVL - logging level to syslog (by logger command)
+#   - @var KDUMP_KMSGLOGLVL - logging level to /dev/kmsg (only for boot-time)
+#
+# In the second kernel, kdump will use the rd.kdumploglvl option to set the
+# log level in the above KDUMP_COMMANDLINE_APPEND.
+#   - @var rd.kdumploglvl - logging level to syslog (by logger command)
+#   - for example: add the rd.kdumploglvl=3 option to KDUMP_COMMANDLINE_APPEND
+#
+# Logging levels: no logging(0), error(1),warn(2),info(3),debug(4)
+#
+# KDUMP_STDLOGLVL=3
+# KDUMP_SYSLOGLVL=0
+# KDUMP_KMSGLOGLVL=0

SOURCES/kdump.sysconfig.aarch64

@@ -17,7 +17,7 @@ KDUMP_COMMANDLINE=""
 # This variable lets us remove arguments from the current kdump commandline
 # as taken from either KDUMP_COMMANDLINE above, or from /proc/cmdline
 # NOTE: some arguments such as crashkernel will always be removed
-KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug quiet log_buf_len swiotlb"
+KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug quiet log_buf_len swiotlb ignition.firstboot"
 
 # This variable lets us append arguments to the current kdump commandline
 # after processed by KDUMP_COMMANDLINE_REMOVE
@@ -28,10 +28,26 @@ KDUMP_COMMANDLINE_APPEND="irqpoll nr_cpus=1 reset_devices cgroup_disable=memory
 #
 # Example:
 #   KEXEC_ARGS="--elf32-core-headers"
-KEXEC_ARGS=""
+KEXEC_ARGS="-s"
 
 #Where to find the boot image
 #KDUMP_BOOTDIR="/boot"
 
 #What is the image type used for kdump
 KDUMP_IMG="vmlinuz"
+
+# Logging is controlled by following variables in the first kernel:
+#   - @var KDUMP_STDLOGLVL - logging level to standard error (console output)
+#   - @var KDUMP_SYSLOGLVL - logging level to syslog (by logger command)
+#   - @var KDUMP_KMSGLOGLVL - logging level to /dev/kmsg (only for boot-time)
+#
+# In the second kernel, kdump will use the rd.kdumploglvl option to set the
+# log level in the above KDUMP_COMMANDLINE_APPEND.
+#   - @var rd.kdumploglvl - logging level to syslog (by logger command)
+#   - for example: add the rd.kdumploglvl=3 option to KDUMP_COMMANDLINE_APPEND
+#
+# Logging levels: no logging(0), error(1),warn(2),info(3),debug(4)
+#
+# KDUMP_STDLOGLVL=3
+# KDUMP_SYSLOGLVL=0
+# KDUMP_KMSGLOGLVL=0

SOURCES/kdump.sysconfig.i386

@@ -17,7 +17,7 @@ KDUMP_COMMANDLINE=""
 # This variable lets us remove arguments from the current kdump commandline
 # as taken from either KDUMP_COMMANDLINE above, or from /proc/cmdline
 # NOTE: some arguments such as crashkernel will always be removed
-KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug quiet log_buf_len swiotlb"
+KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug quiet log_buf_len swiotlb ignition.firstboot"
 
 # This variable lets us append arguments to the current kdump commandline
 # after processed by KDUMP_COMMANDLINE_REMOVE
@@ -38,3 +38,19 @@ KDUMP_IMG="vmlinuz"
 
 #What is the images extension.  Relocatable kernels don't have one
 KDUMP_IMG_EXT=""
+
+# Logging is controlled by following variables in the first kernel:
+#   - @var KDUMP_STDLOGLVL - logging level to standard error (console output)
+#   - @var KDUMP_SYSLOGLVL - logging level to syslog (by logger command)
+#   - @var KDUMP_KMSGLOGLVL - logging level to /dev/kmsg (only for boot-time)
+#
+# In the second kernel, kdump will use the rd.kdumploglvl option to set the
+# log level in the above KDUMP_COMMANDLINE_APPEND.
+#   - @var rd.kdumploglvl - logging level to syslog (by logger command)
+#   - for example: add the rd.kdumploglvl=3 option to KDUMP_COMMANDLINE_APPEND
+#
+# Logging levels: no logging(0), error(1),warn(2),info(3),debug(4)
+#
+# KDUMP_STDLOGLVL=3
+# KDUMP_SYSLOGLVL=0
+# KDUMP_KMSGLOGLVL=0

SOURCES/kdump.sysconfig.ppc64

@@ -17,7 +17,7 @@ KDUMP_COMMANDLINE=""
 # This variable lets us remove arguments from the current kdump commandline
 # as taken from either KDUMP_COMMANDLINE above, or from /proc/cmdline
 # NOTE: some arguments such as crashkernel will always be removed
-KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug quiet log_buf_len swiotlb"
+KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug quiet log_buf_len swiotlb ignition.firstboot"
 
 # This variable lets us append arguments to the current kdump commandline
 # after processed by KDUMP_COMMANDLINE_REMOVE
@@ -40,3 +40,19 @@ KDUMP_IMG="vmlinuz"
 KDUMP_IMG_EXT=""
 
 #Specify the action after failure
+
+# Logging is controlled by following variables in the first kernel:
+#   - @var KDUMP_STDLOGLVL - logging level to standard error (console output)
+#   - @var KDUMP_SYSLOGLVL - logging level to syslog (by logger command)
+#   - @var KDUMP_KMSGLOGLVL - logging level to /dev/kmsg (only for boot-time)
+#
+# In the second kernel, kdump will use the rd.kdumploglvl option to set the
+# log level in the above KDUMP_COMMANDLINE_APPEND.
+#   - @var rd.kdumploglvl - logging level to syslog (by logger command)
+#   - for example: add the rd.kdumploglvl=3 option to KDUMP_COMMANDLINE_APPEND
+#
+# Logging levels: no logging(0), error(1),warn(2),info(3),debug(4)
+#
+# KDUMP_STDLOGLVL=3
+# KDUMP_SYSLOGLVL=0
+# KDUMP_KMSGLOGLVL=0

SOURCES/kdump.sysconfig.ppc64le

@@ -17,7 +17,7 @@ KDUMP_COMMANDLINE=""
 # This variable lets us remove arguments from the current kdump commandline
 # as taken from either KDUMP_COMMANDLINE above, or from /proc/cmdline
 # NOTE: some arguments such as crashkernel will always be removed
-KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug quiet log_buf_len swiotlb"
+KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug quiet log_buf_len swiotlb ignition.firstboot"
 
 # This variable lets us append arguments to the current kdump commandline
 # after processed by KDUMP_COMMANDLINE_REMOVE
@@ -40,3 +40,19 @@ KDUMP_IMG="vmlinuz"
 KDUMP_IMG_EXT=""
 
 #Specify the action after failure
+
+# Logging is controlled by following variables in the first kernel:
+#   - @var KDUMP_STDLOGLVL - logging level to standard error (console output)
+#   - @var KDUMP_SYSLOGLVL - logging level to syslog (by logger command)
+#   - @var KDUMP_KMSGLOGLVL - logging level to /dev/kmsg (only for boot-time)
+#
+# In the second kernel, kdump will use the rd.kdumploglvl option to set the
+# log level in the above KDUMP_COMMANDLINE_APPEND.
+#   - @var rd.kdumploglvl - logging level to syslog (by logger command)
+#   - for example: add the rd.kdumploglvl=3 option to KDUMP_COMMANDLINE_APPEND
+#
+# Logging levels: no logging(0), error(1),warn(2),info(3),debug(4)
+#
+# KDUMP_STDLOGLVL=3
+# KDUMP_SYSLOGLVL=0
+# KDUMP_KMSGLOGLVL=0

SOURCES/kdump.sysconfig.s390x

@@ -17,7 +17,7 @@ KDUMP_COMMANDLINE=""
 # This variable lets us remove arguments from the current kdump commandline
 # as taken from either KDUMP_COMMANDLINE above, or from /proc/cmdline
 # NOTE: some arguments such as crashkernel will always be removed
-KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug quiet log_buf_len swiotlb"
+KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug quiet log_buf_len swiotlb prot_virt ignition.firstboot zfcp.allow_lun_scan"
 
 # This variable lets us append arguments to the current kdump commandline
 # after processed by KDUMP_COMMANDLINE_REMOVE
@@ -31,7 +31,7 @@ MKDUMPRD_ARGS=""
 #
 # Example:
 #   KEXEC_ARGS="--elf32-core-headers"
-KEXEC_ARGS=""
+KEXEC_ARGS="-s"
 
 #Where to find the boot image
 #KDUMP_BOOTDIR="/boot"
@@ -41,3 +41,19 @@ KDUMP_IMG="vmlinuz"
 
 #What is the images extension.  Relocatable kernels don't have one
 KDUMP_IMG_EXT=""
+
+# Logging is controlled by following variables in the first kernel:
+#   - @var KDUMP_STDLOGLVL - logging level to standard error (console output)
+#   - @var KDUMP_SYSLOGLVL - logging level to syslog (by logger command)
+#   - @var KDUMP_KMSGLOGLVL - logging level to /dev/kmsg (only for boot-time)
+#
+# In the second kernel, kdump will use the rd.kdumploglvl option to set the
+# log level in the above KDUMP_COMMANDLINE_APPEND.
+#   - @var rd.kdumploglvl - logging level to syslog (by logger command)
+#   - for example: add the rd.kdumploglvl=3 option to KDUMP_COMMANDLINE_APPEND
+#
+# Logging levels: no logging(0), error(1),warn(2),info(3),debug(4)
+#
+# KDUMP_STDLOGLVL=3
+# KDUMP_SYSLOGLVL=0
+# KDUMP_KMSGLOGLVL=0

SOURCES/kdump.sysconfig.x86_64

@@ -17,7 +17,7 @@ KDUMP_COMMANDLINE=""
 # This variable lets us remove arguments from the current kdump commandline
 # as taken from either KDUMP_COMMANDLINE above, or from /proc/cmdline
 # NOTE: some arguments such as crashkernel will always be removed
-KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug quiet log_buf_len swiotlb"
+KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug quiet log_buf_len swiotlb ignition.firstboot"
 
 # This variable lets us append arguments to the current kdump commandline
 # after processed by KDUMP_COMMANDLINE_REMOVE
@@ -38,3 +38,19 @@ KDUMP_IMG="vmlinuz"
 
 #What is the images extension.  Relocatable kernels don't have one
 KDUMP_IMG_EXT=""
+
+# Logging is controlled by following variables in the first kernel:
+#   - @var KDUMP_STDLOGLVL - logging level to standard error (console output)
+#   - @var KDUMP_SYSLOGLVL - logging level to syslog (by logger command)
+#   - @var KDUMP_KMSGLOGLVL - logging level to /dev/kmsg (only for boot-time)
+#
+# In the second kernel, kdump will use the rd.kdumploglvl option to set the
+# log level in the above KDUMP_COMMANDLINE_APPEND.
+#   - @var rd.kdumploglvl - logging level to syslog (by logger command)
+#   - for example: add the rd.kdumploglvl=3 option to KDUMP_COMMANDLINE_APPEND
+#
+# Logging levels: no logging(0), error(1),warn(2),info(3),debug(4)
+#
+# KDUMP_STDLOGLVL=3
+# KDUMP_SYSLOGLVL=0
+# KDUMP_KMSGLOGLVL=0

SOURCES/kdumpctl.8

@@ -44,6 +44,11 @@ impossible to use password authentication during kdump.
 .TP
 .I showmem
 Prints the size of reserved memory for crash kernel in megabytes.
+.TP
+.I estimate
+Estimate a suitable crashkernel value for current machine. This is a
+best-effort estimate. It will print a recommanded crashkernel value
+based on current kdump setup, and list some details of memory usage.
 
 .SH "SEE ALSO"
 .BR kdump.conf (5),

SOURCES/kexec-kdump-howto.txt

@@ -524,17 +524,91 @@ to send over the necessary ssh key file. Restart the kdump service via
 Advanced Setups
 ===============
 
-Kdump boot directory
---------------------
+About /etc/sysconfig/kdump
+------------------------------
+
+Currently, there are a few options in /etc/sysconfig/kdump, which are
+usually used to control the behavior of kdump kernel. Basically, all of
+these options have default values, usually we do not need to change them,
+but sometimes, we may modify them in order to better control the behavior
+of kdump kernel such as debug, etc.
+
+-KDUMP_BOOTDIR
 
 Usually kdump kernel is the same as 1st kernel. So kdump will try to find
 kdump kernel under /boot according to /proc/cmdline. E.g we execute below
 command and get an output:
 	cat /proc/cmdline
 	BOOT_IMAGE=/xxx/vmlinuz-3.yyy.zzz  root=xxxx .....
-Then kdump kernel will be /boot/xxx/vmlinuz-3.yyy.zzz.
-However a variable KDUMP_BOOTDIR in /etc/sysconfig/kdump is provided to
-user if kdump kernel is put in a different directory.
+
+Then kdump kernel will be /boot/xxx/vmlinuz-3.yyy.zzz. However, this option
+is provided to user if kdump kernel is put in a different directory.
+
+-KDUMP_IMG
+
+This represents the image type used for kdump. The default value is "vmlinuz".
+
+-KDUMP_IMG_EXT
+
+This represents the images extension. Relocatable kernels don't have one.
+Currently, it is a null string by default.
+
+-KEXEC_ARGS
+
+Any additional kexec arguments required. For example:
+KEXEC_ARGS="--elf32-core-headers".
+
+In most situations, this should be left empty. But, sometimes we hope to get
+additional kexec loading debugging information, we can add the '-d' option
+for the debugging.
+
+-KDUMP_KERNELVER
+
+This is a kernel version string for the kdump kernel. If the version is not
+specified, the init script will try to find a kdump kernel with the same
+version number as the running kernel.
+
+-KDUMP_COMMANDLINE
+
+The value of 'KDUMP_COMMANDLINE' will be passed to kdump kernel as command
+line parameters, this will likely match the contents of the grub kernel line.
+
+In general, if a command line is not specified, which means that it is a null
+string such as KDUMP_COMMANDLINE="", the default will be taken automatically
+from the '/proc/cmdline'.
+
+-KDUMP_COMMANDLINE_REMOVE
+
+This option allows us to remove arguments from the current kdump command line.
+If we don't specify any parameters for the KDUMP_COMMANDLINE, it will inherit
+all values from the '/proc/cmdline', which is not expected. As you know, some
+default kernel parameters could affect kdump, furthermore, that could cause
+the failure of kdump kernel boot.
+
+In addition, the option is also helpful to debug the kdump kernel, we can use
+this option to change kdump kernel command line.
+
+For more kernel parameters, please refer to kernel document.
+
+-KDUMP_COMMANDLINE_APPEND
+
+This option allows us to append arguments to the current kdump command line
+after processed by the KDUMP_COMMANDLINE_REMOVE. For kdump kernel, some
+specific modules require to be disabled like the mce, cgroup, numa, hest_disable,
+etc. Those modules may waste memory or kdump kernel doesn't need them,
+furthermore, there may affect kdump kernel boot.
+
+Just like above option, it can be used to disable or enable some kernel
+modules so that we can exclude any errors for kdump kernel, this is very
+meaningful for debugging.
+
+-KDUMP_STDLOGLVL | KDUMP_SYSLOGLVL | KDUMP_KMSGLOGLVL
+
+These variables are used to control the kdump log level in the first kernel.
+In the second kernel, kdump will use the rd.kdumploglvl option to set the log
+level in the above KDUMP_COMMANDLINE_APPEND.
+
+Logging levels: no logging(0), error(1), warn(2), info(3), debug(4)
 
 Kdump Post-Capture Executable
 -----------------------------
@@ -547,6 +621,9 @@ If /etc/kdump/post.d directory exist, All files in the directory are
 collectively sorted and executed in lexical order, before binary or script
 specified kdump_post parameter is executed.
 
+In these scripts, the reference to the storage or network device should adhere
+to the section 'Supported dump target types and requirements'
+
 Kdump Pre-Capture Executable
 ----------------------------
 
@@ -560,6 +637,9 @@ kdump_pre parameter is executed.
 Even if the binary or script in /etc/kdump/pre.d directory returns non 0
 exit status, the processing is continued.
 
+In these scripts, the reference to the storage or network device should adhere
+to the section 'Supported dump target types and requirements'
+
 Extra Binaries
 --------------
 
@@ -613,7 +693,7 @@ is a dump filtering and compression utility provided with kexec-tools. On
 some architectures, it can drastically reduce the size of your vmcore files,
 which becomes very useful on systems with large amounts of memory.
 
-A typical setup is 'core_collector makedumpfile -F -l --message-level 1 -d 31',
+A typical setup is 'core_collector makedumpfile -F -l --message-level 7 -d 31',
 but check the output of '/sbin/makedumpfile --help' for a list of all available
 options (-i and -g don't need to be specified, they're automatically taken care
 of). Note that use of makedumpfile requires that the kernel-debuginfo package
@@ -633,11 +713,11 @@ First one is source file and second one is target file. For ex.
 
 - ex2.
 
-  core_collector "makedumpfile -l --message-level 1 -d 31"
+  core_collector "makedumpfile -l --message-level 7 -d 31"
 
   Above will effectively be translated to:
 
-  makedumpfile -l --message-level 1 -d 31 /proc/vmcore <dest-path>/vmcore
+  makedumpfile -l --message-level 7 -d 31 /proc/vmcore <dest-path>/vmcore
 
 For dump targets like raw and ssh, in general, core collector should expect
 one argument (source file) and should output the processed core on standard
@@ -656,11 +736,11 @@ raw dumps core_collector examples:
 
 - ex4.
 
-  core_collector "makedumpfile -F -l --message-level 1 -d 31"
+  core_collector "makedumpfile -F -l --message-level 7 -d 31"
 
   Above will effectively be translated to.
 
-  makedumpfile -F -l --message-level 1 -d 31 | dd of=<target-device>
+  makedumpfile -F -l --message-level 7 -d 31 | dd of=<target-device>
 
 ssh dumps core_collector examples:
 
@@ -674,11 +754,11 @@ ssh dumps core_collector examples:
 
 - ex6.
 
-  core_collector "makedumpfile -F -l --message-level 1 -d 31"
+  core_collector "makedumpfile -F -l --message-level 7 -d 31"
 
   Above will effectively be translated to.
 
-  makedumpfile -F -l --message-level 1 -d 31 | ssh <options> <remote-location> "dd of=path/vmcore"
+  makedumpfile -F -l --message-level 7 -d 31 | ssh <options> <remote-location> "dd of=path/vmcore"
 
 There is one exception to standard output rule for ssh dumps. And that is
 scp. As scp can handle ssh destinations for file transfers, one can
@@ -696,9 +776,9 @@ About default core collector
 ----------------------------
 
 Default core_collector for ssh/raw dump is:
-"makedumpfile -F -l --message-level 1 -d 31".
+"makedumpfile -F -l --message-level 7 -d 31".
 Default core_collector for other targets is:
-"makedumpfile -l --message-level 1 -d 31".
+"makedumpfile -l --message-level 7 -d 31".
 
 Even if core_collector option is commented out in kdump.conf, makedumpfile
 is default core collector and kdump uses it internally.
@@ -885,3 +965,83 @@ Debugging Tips
   minicom -C /tmp/console-logs
 
   Now minicom should be logging serial console in file console-logs.
+
+- Using the logger to output kdump log messages
+
+  You can configure the kdump log level for the first kernel in the
+  /etc/sysconfig/kdump. For example:
+
+  KDUMP_STDLOGLVL=3
+  KDUMP_SYSLOGLVL=0
+  KDUMP_KMSGLOGLVL=0
+
+  The above configurations indicate that kdump messages will be printed
+  to the console, and the KDUMP_STDLOGLVL is set to 3(info), but the
+  KDUMP_SYSLOGLVL and KDUMP_KMSGLOGLVL are set to 0(no logging). This
+  is also the current default log levels in the first kernel.
+
+  In the second kernel, you can add the 'rd.kdumploglvl=X' option to the
+  KDUMP_COMMANDLINE_APPEND in the /etc/sysconfig/kdump so that you can also
+  set the log levels for the second kernel. The 'X' represents the logging
+  levels, the default log level is 3(info) in the second kernel, for example:
+
+  # cat /etc/sysconfig/kdump |grep rd.kdumploglvl
+  KDUMP_COMMANDLINE_APPEND="irqpoll nr_cpus=1 reset_devices cgroup_disable=memory mce=off numa=off udev.children-max=2 panic=10 acpi_no_memhotplug transparent_hugepage=never nokaslr hest_disable novmcoredd rd.kdumploglvl=3"
+
+  Logging levels: no logging(0), error(1),warn(2),info(3),debug(4)
+
+  The ERROR level designates error events that might still allow the application
+  to continue running.
+
+  The WARN level designates potentially harmful situations.
+
+  The INFO level designates informational messages that highlight the progress
+  of the application at coarse-grained level.
+
+  The DEBUG level designates fine-grained informational events that are most
+  useful to debug an application.
+
+  Note: if you set the log level to 0, that will disable the logs at the
+  corresponding log level, which indicates that it has no log output.
+
+  At present, the logger works in both the first kernel(kdump service debugging)
+  and the second kernel.
+
+  In the first kernel, you can find the historical logs with the journalctl
+  command and check kdump service debugging information. In addition, the
+  'kexec -d' debugging messages are also saved to /var/log/kdump.log in the
+  first kernel. For example:
+
+  [root@ibm-z-109 ~]# ls -al /var/log/kdump.log
+  -rw-r--r--. 1 root root 63238 Oct 28 06:40 /var/log/kdump.log
+
+  If you want to get the debugging information of building kdump initramfs, you
+  can enable the '--debug' option for the dracut_args in the /etc/kdump.conf, and
+  then rebuild the kdump initramfs as below:
+
+  # systemctl restart kdump.service
+
+  That will rebuild the kdump initramfs and gerenate some logs to journald, you
+  can find the dracut logs with the journalctl command.
+
+  In the second kernel, kdump will automatically put the kexec-dmesg.log to a same
+  directory with the vmcore, the log file includes the debugging messages like dmesg
+  and journald logs. For example:
+
+  [root@ibm-z-109 ~]# ls -al /var/crash/127.0.0.1-2020-10-28-02\:01\:23/
+  drwxr-xr-x. 2 root root       67 Oct 28 02:02 .
+  drwxr-xr-x. 6 root root      154 Oct 28 02:01 ..
+  -rw-r--r--. 1 root root    21164 Oct 28 02:01 kexec-dmesg.log
+  -rw-------. 1 root root 74238698 Oct 28 02:01 vmcore
+  -rw-r--r--. 1 root root    17532 Oct 28 02:01 vmcore-dmesg.txt
+
+  If you want to get more debugging information in the second kernel, you can add
+  the 'rd.debug' option to the KDUMP_COMMANDLINE_APPEND in the /etc/sysconfig/kdump,
+  and then reload them in order to make the changes take effect.
+
+  In addition, you can also add the 'rd.memdebug=X' option to the KDUMP_COMMANDLINE_APPEND
+  in the /etc/sysconfig/kdump in order to output the additional information about
+  kernel module memory consumption during loading.
+
+  For more details, please refer to the /etc/sysconfig/kdump, or the man page of
+  dracut.cmdline and kdump.conf.

SOURCES/kexec-tools-2.0.20-Cleanup-move-it-back-from-util_lib-elf_info.c.patch

@@ -1,181 +0,0 @@
-From a7c4cb8e998571cb3dd62e907935a1e052b15d6c Mon Sep 17 00:00:00 2001
-From: Lianbo Jiang <lijiang@redhat.com>
-Date: Fri, 23 Aug 2019 20:05:38 +0800
-Subject: [PATCH 3/5] Cleanup: move it back from util_lib/elf_info.c
-
-Some code related to vmcore-dmesg.c is put into the util_lib, which
-is not very reasonable, so lets move it back and tidy up those code.
-
-In addition, that will also help to limit the size of vmcore-dmesg.txt
-in vmcore-dmesg.c instead of elf_info.c.
-
-Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
-Signed-off-by: Simon Horman <horms@verge.net.au>
----
- util_lib/elf_info.c         | 48 +++++++++----------------------------
- util_lib/include/elf_info.h |  2 +-
- vmcore-dmesg/vmcore-dmesg.c | 30 ++++++++++++++++++++++-
- 3 files changed, 41 insertions(+), 39 deletions(-)
-
-diff --git a/util_lib/elf_info.c b/util_lib/elf_info.c
-index 5d0efaafab53..2bce5cb1713c 100644
---- a/util_lib/elf_info.c
-+++ b/util_lib/elf_info.c
-@@ -531,19 +531,7 @@ static int32_t read_file_s32(int fd, uint64_t addr)
- 	return read_file_u32(fd, addr);
- }
- 
--static void write_to_stdout(char *buf, unsigned int nr)
--{
--	ssize_t ret;
--
--	ret = write(STDOUT_FILENO, buf, nr);
--	if (ret != nr) {
--		fprintf(stderr, "Failed to write out the dmesg log buffer!:"
--			" %s\n", strerror(errno));
--		exit(54);
--	}
--}
--
--static void dump_dmesg_legacy(int fd)
-+static void dump_dmesg_legacy(int fd, void (*handler)(char*, unsigned int))
- {
- 	uint64_t log_buf, log_buf_offset;
- 	unsigned log_end, logged_chars, log_end_wrapped;
-@@ -604,7 +592,8 @@ static void dump_dmesg_legacy(int fd)
- 	 */
- 	logged_chars = log_end < log_buf_len ? log_end : log_buf_len;
- 
--	write_to_stdout(buf + (log_buf_len - logged_chars), logged_chars);
-+	if (handler)
-+		handler(buf + (log_buf_len - logged_chars), logged_chars);
- }
- 
- static inline uint16_t struct_val_u16(char *ptr, unsigned int offset)
-@@ -623,7 +612,7 @@ static inline uint64_t struct_val_u64(char *ptr, unsigned int offset)
- }
- 
- /* Read headers of log records and dump accordingly */
--static void dump_dmesg_structured(int fd)
-+static void dump_dmesg_structured(int fd, void (*handler)(char*, unsigned int))
- {
- #define OUT_BUF_SIZE	4096
- 	uint64_t log_buf, log_buf_offset, ts_nsec;
-@@ -733,7 +722,8 @@ static void dump_dmesg_structured(int fd)
- 				out_buf[len++] = c;
- 
- 			if (len >= OUT_BUF_SIZE - 64) {
--				write_to_stdout(out_buf, len);
-+				if (handler)
-+					handler(out_buf, len);
- 				len = 0;
- 			}
- 		}
-@@ -752,16 +742,16 @@ static void dump_dmesg_structured(int fd)
- 			current_idx += loglen;
- 	}
- 	free(buf);
--	if (len)
--		write_to_stdout(out_buf, len);
-+	if (len && handler)
-+		handler(out_buf, len);
- }
- 
--static void dump_dmesg(int fd)
-+void dump_dmesg(int fd, void (*handler)(char*, unsigned int))
- {
- 	if (log_first_idx_vaddr)
--		dump_dmesg_structured(fd);
-+		dump_dmesg_structured(fd, handler);
- 	else
--		dump_dmesg_legacy(fd);
-+		dump_dmesg_legacy(fd, handler);
- }
- 
- int read_elf(int fd)
-@@ -808,22 +798,6 @@ int read_elf(int fd)
- 	return 0;
- }
- 
--int read_elf_vmcore(int fd)
--{
--	int ret;
--
--	ret = read_elf(fd);
--	if (ret > 0) {
--		fprintf(stderr, "Unable to read ELF information"
--			" from vmcore\n");
--		return ret;
--	}
--
--	dump_dmesg(fd);
--
--	return 0;
--}
--
- int read_phys_offset_elf_kcore(int fd, unsigned long *phys_off)
- {
- 	int ret;
-diff --git a/util_lib/include/elf_info.h b/util_lib/include/elf_info.h
-index c328a1b0ecf2..4bc9279ba603 100644
---- a/util_lib/include/elf_info.h
-+++ b/util_lib/include/elf_info.h
-@@ -30,6 +30,6 @@ int get_pt_load(int idx,
- 	unsigned long long *virt_end);
- int read_phys_offset_elf_kcore(int fd, unsigned long *phys_off);
- int read_elf(int fd);
--int read_elf_vmcore(int fd);
-+void dump_dmesg(int fd, void (*handler)(char*, unsigned int));
- 
- #endif /* ELF_INFO_H */
-diff --git a/vmcore-dmesg/vmcore-dmesg.c b/vmcore-dmesg/vmcore-dmesg.c
-index bebc348a657e..fe7df8ec372c 100644
---- a/vmcore-dmesg/vmcore-dmesg.c
-+++ b/vmcore-dmesg/vmcore-dmesg.c
-@@ -5,6 +5,34 @@ typedef Elf32_Nhdr Elf_Nhdr;
- 
- extern const char *fname;
- 
-+static void write_to_stdout(char *buf, unsigned int nr)
-+{
-+	ssize_t ret;
-+
-+	ret = write(STDOUT_FILENO, buf, nr);
-+	if (ret != nr) {
-+		fprintf(stderr, "Failed to write out the dmesg log buffer!:"
-+			" %s\n", strerror(errno));
-+		exit(54);
-+	}
-+}
-+
-+static int read_vmcore_dmesg(int fd, void (*handler)(char*, unsigned int))
-+{
-+	int ret;
-+
-+	ret = read_elf(fd);
-+	if (ret > 0) {
-+		fprintf(stderr, "Unable to read ELF information"
-+			" from vmcore\n");
-+		return ret;
-+	}
-+
-+	dump_dmesg(fd, handler);
-+
-+	return 0;
-+}
-+
- int main(int argc, char **argv)
- {
- 	ssize_t ret;
-@@ -23,7 +51,7 @@ int main(int argc, char **argv)
- 		return 2;
- 	}
- 
--	ret = read_elf_vmcore(fd);
-+	ret = read_vmcore_dmesg(fd, write_to_stdout);
- 	
- 	close(fd);
- 
--- 
-2.17.1
-

SOURCES/kexec-tools-2.0.20-Cleanup-remove-the-read_elf_kcore.patch

@@ -1,84 +0,0 @@
-From 545c811050a375f79e0fa0e107cb35b9ae3a1599 Mon Sep 17 00:00:00 2001
-From: Lianbo Jiang <lijiang@redhat.com>
-Date: Fri, 23 Aug 2019 20:05:36 +0800
-Subject: [PATCH 1/5] Cleanup: remove the read_elf_kcore()
-
-Here, no need to wrap the read_elf() again, lets invoke it directly.
-So remove the read_elf_kcore() and clean up redundant code.
-
-Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
-Signed-off-by: Simon Horman <horms@verge.net.au>
----
- kexec/arch/arm64/kexec-arm64.c |  2 +-
- util_lib/elf_info.c            | 15 ++-------------
- util_lib/include/elf_info.h    |  2 +-
- 3 files changed, 4 insertions(+), 15 deletions(-)
-
-diff --git a/kexec/arch/arm64/kexec-arm64.c b/kexec/arch/arm64/kexec-arm64.c
-index eb3a3a37307c..6ad3b0a134b3 100644
---- a/kexec/arch/arm64/kexec-arm64.c
-+++ b/kexec/arch/arm64/kexec-arm64.c
-@@ -889,7 +889,7 @@ int get_phys_base_from_pt_load(unsigned long *phys_offset)
- 		return EFAILED;
- 	}
- 
--	read_elf_kcore(fd);
-+	read_elf(fd);
- 
- 	for (i = 0; get_pt_load(i,
- 		    &phys_start, NULL, &virt_start, NULL);
-diff --git a/util_lib/elf_info.c b/util_lib/elf_info.c
-index 90a3b21662e7..d9397ecd8626 100644
---- a/util_lib/elf_info.c
-+++ b/util_lib/elf_info.c
-@@ -764,7 +764,7 @@ static void dump_dmesg(int fd)
- 		dump_dmesg_legacy(fd);
- }
- 
--static int read_elf(int fd)
-+int read_elf(int fd)
- {
- 	int ret;
- 
-@@ -824,24 +824,13 @@ int read_elf_vmcore(int fd)
- 	return 0;
- }
- 
--int read_elf_kcore(int fd)
--{
--	int ret;
--
--	ret = read_elf(fd);
--	if (ret != 0)
--		return ret;
--
--	return 0;
--}
--
- int read_phys_offset_elf_kcore(int fd, unsigned long *phys_off)
- {
- 	int ret;
- 
- 	*phys_off = UINT64_MAX;
- 
--	ret = read_elf_kcore(fd);
-+	ret = read_elf(fd);
- 	if (!ret) {
- 		/* If we have a valid 'PHYS_OFFSET' by now,
- 		 * return it to the caller now.
-diff --git a/util_lib/include/elf_info.h b/util_lib/include/elf_info.h
-index 1a4debd2d4ba..c328a1b0ecf2 100644
---- a/util_lib/include/elf_info.h
-+++ b/util_lib/include/elf_info.h
-@@ -29,7 +29,7 @@ int get_pt_load(int idx,
- 	unsigned long long *virt_start,
- 	unsigned long long *virt_end);
- int read_phys_offset_elf_kcore(int fd, unsigned long *phys_off);
--int read_elf_kcore(int fd);
-+int read_elf(int fd);
- int read_elf_vmcore(int fd);
- 
- #endif /* ELF_INFO_H */
--- 
-2.17.1
-

SOURCES/kexec-tools-2.0.20-Fix-an-error-definition-about-the-variable-fname.patch

@@ -1,47 +0,0 @@
-From 14ad054e7baa788a6629385ffe5e0f1996b7de02 Mon Sep 17 00:00:00 2001
-From: Lianbo Jiang <lijiang@redhat.com>
-Date: Fri, 23 Aug 2019 20:05:37 +0800
-Subject: [PATCH 2/5] Fix an error definition about the variable 'fname'
-
-The variable 'fname' is mistakenly defined two twice, the first definition
-is in the vmcore-dmesg.c, and the second definition is in the elf_info.c.
-That is confused and incorrect although it's a static type, because the
-value of variable 'fname' is not assigned(set) in elf_info.c. Anyway, its
-value will be always 'null' when printing an error information.
-
-Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
-Signed-off-by: Simon Horman <horms@verge.net.au>
----
- util_lib/elf_info.c         | 2 +-
- vmcore-dmesg/vmcore-dmesg.c | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/util_lib/elf_info.c b/util_lib/elf_info.c
-index d9397ecd8626..5d0efaafab53 100644
---- a/util_lib/elf_info.c
-+++ b/util_lib/elf_info.c
-@@ -20,7 +20,7 @@
- /* The 32bit and 64bit note headers make it clear we don't care */
- typedef Elf32_Nhdr Elf_Nhdr;
- 
--static const char *fname;
-+const char *fname;
- static Elf64_Ehdr ehdr;
- static Elf64_Phdr *phdr;
- static int num_pt_loads;
-diff --git a/vmcore-dmesg/vmcore-dmesg.c b/vmcore-dmesg/vmcore-dmesg.c
-index 7a386b380291..bebc348a657e 100644
---- a/vmcore-dmesg/vmcore-dmesg.c
-+++ b/vmcore-dmesg/vmcore-dmesg.c
-@@ -3,7 +3,7 @@
- /* The 32bit and 64bit note headers make it clear we don't care */
- typedef Elf32_Nhdr Elf_Nhdr;
- 
--static const char *fname;
-+extern const char *fname;
- 
- int main(int argc, char **argv)
- {
--- 
-2.17.1
-

SOURCES/kexec-tools-2.0.20-Limit-the-size-of-vmcore-dmesg.txt-to-2G.patch

@@ -1,55 +0,0 @@
-From fa3f0ed47f3e6dbee485722d13713ad495571b7e Mon Sep 17 00:00:00 2001
-From: Lianbo Jiang <lijiang@redhat.com>
-Date: Fri, 23 Aug 2019 20:05:39 +0800
-Subject: [PATCH 4/5] Limit the size of vmcore-dmesg.txt to 2G
-
-With some corrupted vmcore files, the vmcore-dmesg.txt file may grow
-forever till the kdump disk becomes full, and also probably causes
-the disk error messages as follow:
-...
-sd 0:0:0:0: [sda] tag#6 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
-sd 0:0:0:0: [sda] tag#6 CDB: Read(10) 28 00 08 06 4c 98 00 00 08 00
-blk_update_request: I/O error, dev sda, sector 134630552
-sd 0:0:0:0: [sda] tag#7 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
-sd 0:0:0:0: [sda] tag#7 CDB: Read(10) 28 00 08 06 4c 98 00 00 08 00
-blk_update_request: I/O error, dev sda, sector 134630552
-...
-
-If vmcore-dmesg.txt occupies the whole disk, the vmcore can not be
-saved, this is also a problem.
-
-Lets limit the size of vmcore-dmesg.txt to avoid such problems.
-
-Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
-Signed-off-by: Simon Horman <horms@verge.net.au>
----
- vmcore-dmesg/vmcore-dmesg.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
-diff --git a/vmcore-dmesg/vmcore-dmesg.c b/vmcore-dmesg/vmcore-dmesg.c
-index fe7df8ec372c..81c2a58c9d86 100644
---- a/vmcore-dmesg/vmcore-dmesg.c
-+++ b/vmcore-dmesg/vmcore-dmesg.c
-@@ -5,9 +5,19 @@ typedef Elf32_Nhdr Elf_Nhdr;
- 
- extern const char *fname;
- 
-+/* stole this macro from kernel printk.c */
-+#define LOG_BUF_LEN_MAX (uint32_t)(1 << 31)
-+
- static void write_to_stdout(char *buf, unsigned int nr)
- {
- 	ssize_t ret;
-+	static uint32_t n_bytes = 0;
-+
-+	n_bytes += nr;
-+	if (n_bytes > LOG_BUF_LEN_MAX) {
-+		fprintf(stderr, "The vmcore-dmesg.txt over 2G in size is not supported.\n");
-+		exit(53);
-+	}
- 
- 	ret = write(STDOUT_FILENO, buf, nr);
- 	if (ret != nr) {
--- 
-2.17.1
-

SOURCES/kexec-tools-2.0.20-arm64-kdump-deal-with-a-lot-of-resource-entries-in-p.patch

@@ -1,82 +0,0 @@
-From 2572b8d702e452624bdb8d7b7c39f458e7dcf2ce Mon Sep 17 00:00:00 2001
-From: AKASHI Takahiro <takahiro.akashi@linaro.org>
-Date: Wed, 18 Dec 2019 11:42:32 -0500
-Subject: [PATCH 3/3] arm64: kdump: deal with a lot of resource entries in
- /proc/iomem
-
-As described in the commit ("arm64: kexec: allocate memory space avoiding
-reserved regions"), /proc/iomem now has a lot of "reserved" entries, and
-it's not just enough to have a fixed size of memory range array.
-
-With this patch, kdump is allowed to handle arbitrary number of memory
-ranges, using mem_regions_alloc_and_xxx() functions.
-
-Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
-Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
-Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
-Signed-off-by: Simon Horman <horms@verge.net.au>
----
- kexec/arch/arm64/crashdump-arm64.c | 25 ++++++++++---------------
- 1 file changed, 10 insertions(+), 15 deletions(-)
-
-diff --git a/kexec/arch/arm64/crashdump-arm64.c b/kexec/arch/arm64/crashdump-arm64.c
-index 4fd7aa8fd43c..38d1a0f3000d 100644
---- a/kexec/arch/arm64/crashdump-arm64.c
-+++ b/kexec/arch/arm64/crashdump-arm64.c
-@@ -23,13 +23,8 @@
- #include "kexec-elf.h"
- #include "mem_regions.h"
- 
--/* memory ranges on crashed kernel */
--static struct memory_range system_memory_ranges[CRASH_MAX_MEMORY_RANGES];
--static struct memory_ranges system_memory_rgns = {
--	.size = 0,
--	.max_size = CRASH_MAX_MEMORY_RANGES,
--	.ranges = system_memory_ranges,
--};
-+/* memory ranges of crashed kernel */
-+static struct memory_ranges system_memory_rgns;
- 
- /* memory range reserved for crashkernel */
- struct memory_range crash_reserved_mem;
-@@ -82,7 +77,7 @@ static uint64_t get_kernel_page_offset(void)
-  *
-  * This function is called once for each memory region found in /proc/iomem.
-  * It locates system RAM and crashkernel reserved memory and places these to
-- * variables, respectively, system_memory_ranges and crash_reserved_mem.
-+ * variables, respectively, system_memory_rgns and usablemem_rgns.
-  */
- 
- static int iomem_range_callback(void *UNUSED(data), int UNUSED(nr),
-@@ -90,11 +85,11 @@ static int iomem_range_callback(void *UNUSED(data), int UNUSED(nr),
- 				unsigned long long length)
- {
- 	if (strncmp(str, CRASH_KERNEL, strlen(CRASH_KERNEL)) == 0)
--		return mem_regions_add(&usablemem_rgns,
--				       base, length, RANGE_RAM);
-+		return mem_regions_alloc_and_add(&usablemem_rgns,
-+						base, length, RANGE_RAM);
- 	else if (strncmp(str, SYSTEM_RAM, strlen(SYSTEM_RAM)) == 0)
--		return mem_regions_add(&system_memory_rgns,
--				       base, length, RANGE_RAM);
-+		return mem_regions_alloc_and_add(&system_memory_rgns,
-+						base, length, RANGE_RAM);
- 	else if (strncmp(str, KERNEL_CODE, strlen(KERNEL_CODE)) == 0)
- 		elf_info.kern_paddr_start = base;
- 	else if (strncmp(str, KERNEL_DATA, strlen(KERNEL_DATA)) == 0)
-@@ -135,9 +130,9 @@ static int crash_get_memory_ranges(void)
- 
- 	dbgprint_mem_range("Reserved memory range", &crash_reserved_mem, 1);
- 
--	if (mem_regions_exclude(&system_memory_rgns, &crash_reserved_mem)) {
--		fprintf(stderr,
--			"Error: Number of crash memory ranges excedeed the max limit\n");
-+	if (mem_regions_alloc_and_exclude(&system_memory_rgns,
-+						&crash_reserved_mem)) {
-+		fprintf(stderr, "Cannot allocate memory for ranges\n");
- 		return -ENOMEM;
- 	}
- 
--- 
-2.7.4
-

SOURCES/kexec-tools-2.0.20-arm64-kexec-allocate-memory-space-avoiding-reserved-.patch

@@ -1,248 +0,0 @@
-From f736104f533290b4ce6fbfbca74abde9ffd3888c Mon Sep 17 00:00:00 2001
-From: AKASHI Takahiro <takahiro.akashi@linaro.org>
-Date: Wed, 18 Dec 2019 11:42:31 -0500
-Subject: [PATCH 2/3] arm64: kexec: allocate memory space avoiding reserved
- regions
-
-On UEFI/ACPI-only system, some memory regions, including but not limited
-to UEFI memory map and ACPI tables, must be preserved across kexec'ing.
-Otherwise, they can be corrupted and result in early failure in booting
-a new kernel.
-
-In recent kernels, /proc/iomem now has an extended file format like:
-
- 40000000-5871ffff : System RAM
-   41800000-426affff : Kernel code
-   426b0000-42aaffff : reserved
-   42ab0000-42c64fff : Kernel data
-   54400000-583fffff : Crash kernel
-   58590000-585effff : reserved
-   58700000-5871ffff : reserved
- 58720000-58b5ffff : reserved
- 58b60000-5be3ffff : System RAM
-   58b61000-58b61fff : reserved
-
-where the "reserved" entries at the top level or under System RAM (and
-its descendant resources) are ones of such kind and should not be regarded
-as usable memory ranges where several free spaces for loading kexec data
-will be allocated.
-
-With this patch, get_memory_ranges() will handle this format of file
-correctly. Note that, for safety, unknown regions, in addition to
-"reserved" ones, will also be excluded.
-
-Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
-Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
-Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
-Signed-off-by: Simon Horman <horms@verge.net.au>
----
- kexec/arch/arm64/kexec-arm64.c | 153 +++++++++++++++++++++++++----------------
- 1 file changed, 94 insertions(+), 59 deletions(-)
-
-diff --git a/kexec/arch/arm64/kexec-arm64.c b/kexec/arch/arm64/kexec-arm64.c
-index 6ad3b0a134b3..45ebc54a9b6f 100644
---- a/kexec/arch/arm64/kexec-arm64.c
-+++ b/kexec/arch/arm64/kexec-arm64.c
-@@ -10,7 +10,9 @@
- #include <inttypes.h>
- #include <libfdt.h>
- #include <limits.h>
-+#include <stdio.h>
- #include <stdlib.h>
-+#include <string.h>
- #include <sys/stat.h>
- #include <linux/elf-em.h>
- #include <elf.h>
-@@ -29,6 +31,7 @@
- #include "fs2dt.h"
- #include "iomem.h"
- #include "kexec-syscall.h"
-+#include "mem_regions.h"
- #include "arch/options.h"
- 
- #define ROOT_NODE_ADDR_CELLS_DEFAULT 1
-@@ -905,19 +908,33 @@ int get_phys_base_from_pt_load(unsigned long *phys_offset)
- 	return 0;
- }
- 
-+static bool to_be_excluded(char *str)
-+{
-+	if (!strncmp(str, SYSTEM_RAM, strlen(SYSTEM_RAM)) ||
-+	    !strncmp(str, KERNEL_CODE, strlen(KERNEL_CODE)) ||
-+	    !strncmp(str, KERNEL_DATA, strlen(KERNEL_DATA)) ||
-+	    !strncmp(str, CRASH_KERNEL, strlen(CRASH_KERNEL)))
-+		return false;
-+	else
-+		return true;
-+}
-+
- /**
-- * get_memory_ranges_iomem_cb - Helper for get_memory_ranges_iomem.
-+ * get_memory_ranges - Try to get the memory ranges from
-+ * /proc/iomem.
-  */
--
--static int get_memory_ranges_iomem_cb(void *data, int nr, char *str,
--	unsigned long long base, unsigned long long length)
-+int get_memory_ranges(struct memory_range **range, int *ranges,
-+	unsigned long kexec_flags)
- {
--	int ret;
- 	unsigned long phys_offset = UINT64_MAX;
--	struct memory_range *r;
--
--	if (nr >= KEXEC_SEGMENT_MAX)
--		return -1;
-+	FILE *fp;
-+	const char *iomem = proc_iomem();
-+	char line[MAX_LINE], *str;
-+	unsigned long long start, end;
-+	int n, consumed;
-+	struct memory_ranges memranges;
-+	struct memory_range *last, excl_range;
-+	int ret;
- 
- 	if (!try_read_phys_offset_from_kcore) {
- 		/* Since kernel version 4.19, 'kcore' contains
-@@ -951,17 +968,72 @@ static int get_memory_ranges_iomem_cb(void *data, int nr, char *str,
- 		try_read_phys_offset_from_kcore = true;
- 	}
- 
--	r = (struct memory_range *)data + nr;
-+	fp = fopen(iomem, "r");
-+	if (!fp)
-+		die("Cannot open %s\n", iomem);
-+
-+	memranges.ranges = NULL;
-+	memranges.size = memranges.max_size  = 0;
-+
-+	while (fgets(line, sizeof(line), fp) != 0) {
-+		n = sscanf(line, "%llx-%llx : %n", &start, &end, &consumed);
-+		if (n != 2)
-+			continue;
-+		str = line + consumed;
-+
-+		if (!strncmp(str, SYSTEM_RAM, strlen(SYSTEM_RAM))) {
-+			ret = mem_regions_alloc_and_add(&memranges,
-+					start, end - start + 1, RANGE_RAM);
-+			if (ret) {
-+				fprintf(stderr,
-+					"Cannot allocate memory for ranges\n");
-+				fclose(fp);
-+				return -ENOMEM;
-+			}
- 
--	if (!strncmp(str, SYSTEM_RAM, strlen(SYSTEM_RAM)))
--		r->type = RANGE_RAM;
--	else if (!strncmp(str, IOMEM_RESERVED, strlen(IOMEM_RESERVED)))
--		r->type = RANGE_RESERVED;
--	else
--		return 1;
-+			dbgprintf("%s:+[%d] %016llx - %016llx\n", __func__,
-+				memranges.size - 1,
-+				memranges.ranges[memranges.size - 1].start,
-+				memranges.ranges[memranges.size - 1].end);
-+		} else if (to_be_excluded(str)) {
-+			if (!memranges.size)
-+				continue;
-+
-+			/*
-+			 * Note: mem_regions_exclude() doesn't guarantee
-+			 * that the ranges are sorted out, but as long as
-+			 * we cope with /proc/iomem, we only operate on
-+			 * the last entry and so it is safe.
-+			 */
- 
--	r->start = base;
--	r->end = base + length - 1;
-+			/* The last System RAM range */
-+			last = &memranges.ranges[memranges.size - 1];
-+
-+			if (last->end < start)
-+				/* New resource outside of System RAM */
-+				continue;
-+			if (end < last->start)
-+				/* Already excluded by parent resource */
-+				continue;
-+
-+			excl_range.start = start;
-+			excl_range.end = end;
-+			ret = mem_regions_alloc_and_exclude(&memranges, &excl_range);
-+			if (ret) {
-+				fprintf(stderr,
-+					"Cannot allocate memory for ranges (exclude)\n");
-+				fclose(fp);
-+				return -ENOMEM;
-+			}
-+			dbgprintf("%s:-      %016llx - %016llx\n",
-+					__func__, start, end);
-+		}
-+	}
-+
-+	fclose(fp);
-+
-+	*range = memranges.ranges;
-+	*ranges = memranges.size;
- 
- 	/* As a fallback option, we can try determining the PHYS_OFFSET
- 	 * value from the '/proc/iomem' entries as well.
-@@ -982,52 +1054,15 @@ static int get_memory_ranges_iomem_cb(void *data, int nr, char *str,
- 	 * between the user-space and kernel space 'PHYS_OFFSET'
- 	 * value.
- 	 */
--	set_phys_offset(r->start, "iomem");
--
--	dbgprintf("%s: %016llx - %016llx : %s", __func__, r->start,
--		r->end, str);
--
--	return 0;
--}
--
--/**
-- * get_memory_ranges_iomem - Try to get the memory ranges from
-- * /proc/iomem.
-- */
-+	if (memranges.size)
-+		set_phys_offset(memranges.ranges[0].start, "iomem");
- 
--static int get_memory_ranges_iomem(struct memory_range *array,
--	unsigned int *count)
--{
--	*count = kexec_iomem_for_each_line(NULL,
--		get_memory_ranges_iomem_cb, array);
--
--	if (!*count) {
--		dbgprintf("%s: failed: No RAM found.\n", __func__);
--		return EFAILED;
--	}
-+	dbgprint_mem_range("System RAM ranges;",
-+				memranges.ranges, memranges.size);
- 
- 	return 0;
- }
- 
--/**
-- * get_memory_ranges - Try to get the memory ranges some how.
-- */
--
--int get_memory_ranges(struct memory_range **range, int *ranges,
--	unsigned long kexec_flags)
--{
--	static struct memory_range array[KEXEC_SEGMENT_MAX];
--	unsigned int count;
--	int result;
--
--	result = get_memory_ranges_iomem(array, &count);
--
--	*range = result ? NULL : array;
--	*ranges = result ? 0 : count;
--
--	return result;
--}
--
- int arch_compat_trampoline(struct kexec_info *info)
- {
- 	return 0;
--- 
-2.7.4
-

SOURCES/kexec-tools-2.0.20-kexec-add-variant-helper-functions-for-handling-memo.patch

@@ -1,89 +0,0 @@
-From cf977b1af9ec67fabcc6a625589c49c52d07b11d Mon Sep 17 00:00:00 2001
-From: AKASHI Takahiro <takahiro.akashi@linaro.org>
-Date: Wed, 18 Dec 2019 11:42:30 -0500
-Subject: [PATCH 1/3] kexec: add variant helper functions for handling memory
- regions
-
-mem_regions_alloc_and_add() and mem_regions_alloc_and_exclude() are
-functionally equivalent to, respectively, mem_regions_add() and
-mem_regions_exclude() except the formers will re-allocate memory
-dynamically when no more entries are available in 'ranges' array.
-
-Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
-Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
-Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
-Signed-off-by: Simon Horman <horms@verge.net.au>
----
- kexec/mem_regions.c | 42 ++++++++++++++++++++++++++++++++++++++++++
- kexec/mem_regions.h |  7 +++++++
- 2 files changed, 49 insertions(+)
-
-diff --git a/kexec/mem_regions.c b/kexec/mem_regions.c
-index 50c8abccb93a..ad7d3f13fd84 100644
---- a/kexec/mem_regions.c
-+++ b/kexec/mem_regions.c
-@@ -125,3 +125,45 @@ int mem_regions_exclude(struct memory_ranges *ranges,
- 	}
- 	return 0;
- }
-+
-+#define KEXEC_MEMORY_RANGES 16
-+
-+int mem_regions_alloc_and_add(struct memory_ranges *ranges,
-+			      unsigned long long base,
-+			      unsigned long long length, int type)
-+{
-+	void *new_ranges;
-+
-+	if (ranges->size >= ranges->max_size) {
-+		new_ranges = realloc(ranges->ranges,
-+				sizeof(struct memory_range) *
-+				(ranges->max_size + KEXEC_MEMORY_RANGES));
-+		if (!new_ranges)
-+			return -1;
-+
-+		ranges->ranges = new_ranges;
-+		ranges->max_size += KEXEC_MEMORY_RANGES;
-+	}
-+
-+	return mem_regions_add(ranges, base, length, type);
-+}
-+
-+int mem_regions_alloc_and_exclude(struct memory_ranges *ranges,
-+				  const struct memory_range *range)
-+{
-+	void *new_ranges;
-+
-+	/* for safety, we should have at least one free entry in ranges */
-+	if (ranges->size >= ranges->max_size) {
-+		new_ranges = realloc(ranges->ranges,
-+				sizeof(struct memory_range) *
-+				(ranges->max_size + KEXEC_MEMORY_RANGES));
-+		if (!new_ranges)
-+			return -1;
-+
-+		ranges->ranges = new_ranges;
-+		ranges->max_size += KEXEC_MEMORY_RANGES;
-+	}
-+
-+	return mem_regions_exclude(ranges, range);
-+}
-diff --git a/kexec/mem_regions.h b/kexec/mem_regions.h
-index ae9e972b0206..e306d67e3261 100644
---- a/kexec/mem_regions.h
-+++ b/kexec/mem_regions.h
-@@ -12,4 +12,11 @@ int mem_regions_exclude(struct memory_ranges *ranges,
- int mem_regions_add(struct memory_ranges *ranges, unsigned long long base,
-                     unsigned long long length, int type);
- 
-+int mem_regions_alloc_and_exclude(struct memory_ranges *ranges,
-+				  const struct memory_range *range);
-+
-+int mem_regions_alloc_and_add(struct memory_ranges *ranges,
-+			      unsigned long long base,
-+			      unsigned long long length, int type);
-+
- #endif
--- 
-2.7.4
-

SOURCES/kexec-tools-2.0.20-makedumpfile-PATCH-Align-PMD_SECTION_MASK-with-PHYS_MASK.patch

@@ -1,36 +0,0 @@
-From 7242ae4cb5288df626f464ced0a8b60fd669100b Mon Sep 17 00:00:00 2001
-From: Michal Suchanek <msuchanek@suse.de>
-Date: Mon, 16 Mar 2020 19:39:58 +0100
-Subject: [PATCH 6/7] [PATCH] Align PMD_SECTION_MASK with PHYS_MASK
-
-Reportedly on some arm64 systems makedumpfile loops forever exhausting
-all memory when filtering kernel core. It turns out the reason is it
-cannot resolve some addresses because the PMD mask is wrong. When
-physical address mask allows up to 48bits pmd mask should allow the
-same.
-I suppose you would need a system that needs physical addresses over 1TB
-to be able to reproduce this. This may be either because you have a lot
-of memory or because the firmware mapped some memory above 1TB for some
-reason.
-
-Signed-off-by: Michal Suchanek <msuchanek@suse.de>
----
- arch/arm64.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/makedumpfile-1.6.7/arch/arm64.c b/makedumpfile-1.6.7/arch/arm64.c
-index 43164cc..54d60b4 100644
---- a/makedumpfile-1.6.7/arch/arm64.c
-+++ b/makedumpfile-1.6.7/arch/arm64.c
-@@ -81,7 +81,7 @@ static unsigned long kimage_voffset;
-  * Remove the highest order bits that are not a part of the
-  * physical address in a section
-  */
--#define PMD_SECTION_MASK	((1UL << 40) - 1)
-+#define PMD_SECTION_MASK	((1UL << PHYS_MASK_SHIFT) - 1)
- 
- #define PMD_TYPE_MASK		3
- #define PMD_TYPE_SECT		1
--- 
-2.7.5
-

SOURCES/kexec-tools-2.0.20-makedumpfile-PATCH-Avoid-false-positive-failure-in-mem_seciton-va.patch

@@ -1,80 +0,0 @@
-From 81b79c514ff6fc881f1df4cb04ecb2d7cb22badc Mon Sep 17 00:00:00 2001
-From: Kazuhito Hagio <k-hagio-ab@nec.com>
-Date: Wed, 19 Feb 2020 12:48:13 -0500
-Subject: [PATCH] [PATCH] Avoid false-positive failure in mem_seciton
- validation
-
-Currently in get_mem_section(), we check whether SYMBOL(mem_section)
-is a pointer to the array or a pointer to the pointer to the array
-for some cases.
-
-However, with commit e113f1c974c8 ("[PATCH] cope with not-present
-mem section") relaxing the check, there was a report that the function
-failed because both of two validate_mem_section() calls return TRUE.
-
-Avoid the false-positive failure by not calling the second one if the
-first one returns TRUE.
-
-Reported-by: Pingfan Liu <piliu@redhat.com>
-Acked-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
-Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
----
- makedumpfile.c | 29 ++++++-----------------------
- 1 file changed, 6 insertions(+), 23 deletions(-)
-
-diff --git a/makedumpfile-1.6.7/makedumpfile.c b/makedumpfile-1.6.7/makedumpfile.c
-index f5860a1..4c4251e 100644
---- a/makedumpfile-1.6.7/makedumpfile.c
-+++ b/makedumpfile-1.6.7/makedumpfile.c
-@@ -3472,7 +3472,6 @@ static int
- get_mem_section(unsigned int mem_section_size, unsigned long *mem_maps,
- 		unsigned int num_section)
- {
--	unsigned long mem_section_ptr;
- 	int ret = FALSE;
- 	unsigned long *mem_sec = NULL;
- 
-@@ -3484,34 +3483,18 @@ get_mem_section(unsigned int mem_section_size, unsigned long *mem_maps,
- 	ret = validate_mem_section(mem_sec, SYMBOL(mem_section),
- 				   mem_section_size, mem_maps, num_section);
- 
--	if (is_sparsemem_extreme()) {
--		int symbol_valid = ret;
--		int pointer_valid;
--		int mem_maps_size = sizeof(*mem_maps) * num_section;
--		unsigned long *mem_maps_ex = NULL;
-+	if (!ret && is_sparsemem_extreme()) {
-+		unsigned long mem_section_ptr;
-+
- 		if (!readmem(VADDR, SYMBOL(mem_section), &mem_section_ptr,
- 			     sizeof(mem_section_ptr)))
- 			goto out;
- 
--		if ((mem_maps_ex = malloc(mem_maps_size)) == NULL) {
--			ERRMSG("Can't allocate memory for the mem_maps. %s\n",
--			    strerror(errno));
--			goto out;
--		}
-+		ret = validate_mem_section(mem_sec, mem_section_ptr,
-+				mem_section_size, mem_maps, num_section);
- 
--		pointer_valid = validate_mem_section(mem_sec,
--						     mem_section_ptr,
--						     mem_section_size,
--						     mem_maps_ex,
--						     num_section);
--		if (pointer_valid)
--			memcpy(mem_maps, mem_maps_ex, mem_maps_size);
--		if (mem_maps_ex)
--			free(mem_maps_ex);
--		ret = symbol_valid ^ pointer_valid;
--		if (!ret) {
-+		if (!ret)
- 			ERRMSG("Could not validate mem_section.\n");
--		}
- 	}
- out:
- 	if (mem_sec != NULL)
--- 
-2.7.5
-

SOURCES/kexec-tools-2.0.20-makedumpfile-PATCH-Fix-cd_header-offset-overflow-with-large-pfn.patch

@@ -1,42 +0,0 @@
-From 6e4b2dfaed5e5e5c617e0e45f969c1f571c13e27 Mon Sep 17 00:00:00 2001
-From: Jialong Chen <chenjialong@huawei.com>
-Date: Mon, 23 Mar 2020 16:42:01 -0400
-Subject: [PATCH 7/7] [PATCH] Fix cd_header offset overflow with large pfn
-
-In function write_kdump_pages_and_bitmap_cyclic(), cd_header->offset is
-calculated by the following formula:
-
-    cd_header->offset
-        = (DISKDUMP_HEADER_BLOCKS + dh->sub_hdr_size + dh->bitmap_blocks)
-        * dh->block_size;
-
-However, the variables of the right side are only int and unsigned int,
-so if dh->bitmap_blocks is very large, it causes an interger overflow.
-
-As a result, makedumpfile created a broken vmcore in a system with a
-physical address range from 0x602770ecf000 to 0x6027ffffffff, and the
-crash utility failed during session initialization, ending with the
-error message "crash: vmlinux and vmcore do not match!".
-
-Signed-off-by: Jialong Chen <chenjialong@huawei.com>
-Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
----
- diskdump_mod.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/makedumpfile-1.6.7/diskdump_mod.h b/makedumpfile-1.6.7/diskdump_mod.h
-index 2676817..3733953 100644
---- a/makedumpfile-1.6.7/diskdump_mod.h
-+++ b/makedumpfile-1.6.7/diskdump_mod.h
-@@ -22,7 +22,7 @@
- #define DISK_DUMP_SIGNATURE		"DISKDUMP"
- #define KDUMP_SIGNATURE			"KDUMP   "
- #define SIG_LEN (sizeof(DUMP_PARTITION_SIGNATURE) - 1)
--#define DISKDUMP_HEADER_BLOCKS		(1)
-+#define DISKDUMP_HEADER_BLOCKS		(1UL)
- 
- /*
-  * These are all remnants of the old "diskdump" facility,
--- 
-2.7.5
-

SOURCES/kexec-tools-2.0.20-makedumpfile-PATCH-Introduce-check-params-option.patch

@@ -1,255 +0,0 @@
-From 989152e113bfcb4fbfbad6f3aed6f43be4455919 Mon Sep 17 00:00:00 2001
-From: Kazuhito Hagio <k-hagio-ab@nec.com>
-Date: Tue, 25 Feb 2020 16:04:55 -0500
-Subject: [PATCH 4/7] [PATCH] Introduce --check-params option
-
-Currently it's difficult to check whether a makedumpfile command-line
-is valid or not without an actual panic.  This is inefficient and if
-a wrong configuration is not tested, you will miss the vmcore when an
-actual panic occurs.
-
-In order for kdump facilities like kexec-tools to be able to check
-the specified command-line parameters in advance, introduce the
---check-params option that only checks them and exits immediately.
-
-Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
----
- makedumpfile.8 |  5 ++++
- makedumpfile.c | 75 +++++++++++++++++++++++++++++++++++++++++++++-------------
- makedumpfile.h |  2 ++
- print_info.c   |  4 ++++
- 4 files changed, 69 insertions(+), 17 deletions(-)
-
-diff --git a/makedumpfile-1.6.7/makedumpfile.8 b/makedumpfile-1.6.7/makedumpfile.8
-index bf156a8..c5d4806 100644
---- a/makedumpfile-1.6.7/makedumpfile.8
-+++ b/makedumpfile-1.6.7/makedumpfile.8
-@@ -632,6 +632,11 @@ Show help message and LZO/snappy support status (enabled/disabled).
- \fB\-v\fR
- Show the version of makedumpfile.
- 
-+.TP
-+\fB\-\-check-params\fR
-+Only check whether the command-line parameters are valid or not, and exit.
-+Preferable to be given as the first parameter.
-+
- .SH ENVIRONMENT VARIABLES
- 
- .TP 8
-diff --git a/makedumpfile-1.6.7/makedumpfile.c b/makedumpfile-1.6.7/makedumpfile.c
-index 607e07f..f5860a1 100644
---- a/makedumpfile-1.6.7/makedumpfile.c
-+++ b/makedumpfile-1.6.7/makedumpfile.c
-@@ -10972,12 +10972,6 @@ check_param_for_creating_dumpfile(int argc, char *argv[])
- 	if (info->flag_generate_vmcoreinfo || info->flag_rearrange)
- 		return FALSE;
- 
--	if ((message_level < MIN_MSG_LEVEL)
--	    || (MAX_MSG_LEVEL < message_level)) {
--		message_level = DEFAULT_MSG_LEVEL;
--		MSG("Message_level is invalid.\n");
--		return FALSE;
--	}
- 	if ((info->flag_compress && info->flag_elf_dumpfile)
- 	    || (info->flag_read_vmcoreinfo && info->name_vmlinux)
- 	    || (info->flag_read_vmcoreinfo && info->name_xen_syms))
-@@ -11007,6 +11001,11 @@ check_param_for_creating_dumpfile(int argc, char *argv[])
- 	if (info->flag_partial_dmesg && !info->flag_dmesg)
- 		return FALSE;
- 
-+	if (info->flag_excludevm && !info->working_dir) {
-+		MSG("-%c requires --work-dir\n", OPT_EXCLUDE_UNUSED_VM);
-+		return FALSE;
-+	}
-+
- 	if ((argc == optind + 2) && !info->flag_flatten
- 				 && !info->flag_split
- 				 && !info->flag_sadump_diskset) {
-@@ -11402,6 +11401,23 @@ int show_mem_usage(void)
- 	return TRUE;
- }
- 
-+static int set_message_level(char *str_ml)
-+{
-+	int ml;
-+
-+	ml = atoi(str_ml);
-+	if ((ml < MIN_MSG_LEVEL) || (MAX_MSG_LEVEL < ml)) {
-+		message_level = DEFAULT_MSG_LEVEL;
-+		MSG("Message_level(%d) is invalid.\n", ml);
-+		return FALSE;
-+	}
-+
-+	if (info->flag_check_params)
-+		return TRUE;
-+
-+	message_level = ml;
-+	return TRUE;
-+}
- 
- static struct option longopts[] = {
- 	{"split", no_argument, NULL, OPT_SPLIT},
-@@ -11423,6 +11439,7 @@ static struct option longopts[] = {
- 	{"splitblock-size", required_argument, NULL, OPT_SPLITBLOCK_SIZE},
- 	{"work-dir", required_argument, NULL, OPT_WORKING_DIR},
- 	{"num-threads", required_argument, NULL, OPT_NUM_THREADS},
-+	{"check-params", no_argument, NULL, OPT_CHECK_PARAMS},
- 	{0, 0, 0, 0}
- };
- 
-@@ -11521,7 +11538,8 @@ main(int argc, char *argv[])
- 			info->flag_compress = DUMP_DH_COMPRESSED_LZO;
- 			break;
- 		case OPT_MESSAGE_LEVEL:
--			message_level = atoi(optarg);
-+			if (!set_message_level(optarg))
-+				goto out;
- 			break;
- 		case OPT_DUMP_DMESG:
- 			info->flag_dmesg = 1;
-@@ -11584,6 +11602,10 @@ main(int argc, char *argv[])
- 		case OPT_NUM_THREADS:
- 			info->num_threads = MAX(atoi(optarg), 0);
- 			break;
-+		case OPT_CHECK_PARAMS:
-+			info->flag_check_params = TRUE;
-+			message_level = DEFAULT_MSG_LEVEL;
-+			break;
- 		case '?':
- 			MSG("Commandline parameter is invalid.\n");
- 			MSG("Try `makedumpfile --help' for more information.\n");
-@@ -11593,11 +11615,9 @@ main(int argc, char *argv[])
- 	if (flag_debug)
- 		message_level |= ML_PRINT_DEBUG_MSG;
- 
--	if (info->flag_excludevm && !info->working_dir) {
--		ERRMSG("Error: -%c requires --work-dir\n", OPT_EXCLUDE_UNUSED_VM);
--		ERRMSG("Try `makedumpfile --help' for more information\n");
--		return COMPLETED;
--	}
-+	if (info->flag_check_params)
-+		/* suppress debugging messages */
-+		message_level = DEFAULT_MSG_LEVEL;
- 
- 	if (info->flag_show_usage) {
- 		print_usage();
-@@ -11628,6 +11648,9 @@ main(int argc, char *argv[])
- 			MSG("Try `makedumpfile --help' for more information.\n");
- 			goto out;
- 		}
-+		if (info->flag_check_params)
-+			goto check_ok;
-+
- 		if (!open_files_for_generating_vmcoreinfo())
- 			goto out;
- 
-@@ -11651,6 +11674,9 @@ main(int argc, char *argv[])
- 			MSG("Try `makedumpfile --help' for more information.\n");
- 			goto out;
- 		}
-+		if (info->flag_check_params)
-+			goto check_ok;
-+
- 		if (!check_dump_file(info->name_dumpfile))
- 			goto out;
- 
-@@ -11671,6 +11697,9 @@ main(int argc, char *argv[])
- 			MSG("Try `makedumpfile --help' for more information.\n");
- 			goto out;
- 		}
-+		if (info->flag_check_params)
-+			goto check_ok;
-+
- 		if (!check_dump_file(info->name_dumpfile))
- 			goto out;
- 
-@@ -11684,6 +11713,9 @@ main(int argc, char *argv[])
- 			MSG("Try `makedumpfile --help' for more information.\n");
- 			goto out;
- 		}
-+		if (info->flag_check_params)
-+			goto check_ok;
-+
- 		if (!check_dump_file(info->name_dumpfile))
- 			goto out;
- 		if (!dump_dmesg())
-@@ -11697,6 +11729,9 @@ main(int argc, char *argv[])
- 			MSG("Try `makedumpfile --help' for more information.\n");
- 			goto out;
- 		}
-+		if (info->flag_check_params)
-+			goto check_ok;
-+
- 		if (!populate_kernel_version())
- 			goto out;
- 
-@@ -11715,6 +11750,9 @@ main(int argc, char *argv[])
- 			MSG("Try `makedumpfile --help' for more information.\n");
- 			goto out;
- 		}
-+		if (info->flag_check_params)
-+			goto check_ok;
-+
- 		if (info->flag_split) {
- 			for (i = 0; i < info->num_dumpfile; i++) {
- 				SPLITTING_FD_BITMAP(i) = -1;
-@@ -11742,13 +11780,16 @@ main(int argc, char *argv[])
- 			MSG("The dumpfile is saved to %s.\n", info->name_dumpfile);
- 		}
- 	}
-+check_ok:
- 	retcd = COMPLETED;
- out:
--	MSG("\n");
--	if (retcd != COMPLETED)
--		MSG("makedumpfile Failed.\n");
--	else if (!info->flag_mem_usage)
--		MSG("makedumpfile Completed.\n");
-+	if (!info->flag_check_params) {
-+		MSG("\n");
-+		if (retcd != COMPLETED)
-+			MSG("makedumpfile Failed.\n");
-+		else if (!info->flag_mem_usage)
-+			MSG("makedumpfile Completed.\n");
-+	}
- 
- 	free_for_parallel();
- 
-diff --git a/makedumpfile-1.6.7/makedumpfile.h b/makedumpfile-1.6.7/makedumpfile.h
-index 7217407..03fb4ce 100644
---- a/makedumpfile-1.6.7/makedumpfile.h
-+++ b/makedumpfile-1.6.7/makedumpfile.h
-@@ -1301,6 +1301,7 @@ struct DumpInfo {
- 	int		flag_read_vmcoreinfo;    /* flag of reading vmcoreinfo file */
- 	int		flag_show_usage;     /* flag of showing usage */
- 	int		flag_show_version;   /* flag of showing version */
-+	int		flag_check_params;   /* only check parameters */
- 	int		flag_flatten;        /* flag of outputting flattened
- 						format to a standard out */
- 	int		flag_rearrange;      /* flag of creating dumpfile from
-@@ -2362,6 +2363,7 @@ struct elf_prstatus {
- #define OPT_WORKING_DIR         OPT_START+15
- #define OPT_NUM_THREADS         OPT_START+16
- #define OPT_PARTIAL_DMESG       OPT_START+17
-+#define OPT_CHECK_PARAMS        OPT_START+18
- 
- /*
-  * Function Prototype.
-diff --git a/makedumpfile-1.6.7/print_info.c b/makedumpfile-1.6.7/print_info.c
-index 0be12ea..e0c38b4 100644
---- a/makedumpfile-1.6.7/print_info.c
-+++ b/makedumpfile-1.6.7/print_info.c
-@@ -321,6 +321,10 @@ print_usage(void)
- 	MSG("  [-v]:\n");
- 	MSG("      Show the version of makedumpfile.\n");
- 	MSG("\n");
-+	MSG("  [--check-params]:\n");
-+	MSG("      Only check whether the command-line parameters are valid or not, and exit.\n");
-+	MSG("      Preferable to be given as the first parameter.\n");
-+	MSG("\n");
- 	MSG("  VMLINUX:\n");
- 	MSG("      This is a pathname to the first kernel's vmlinux.\n");
- 	MSG("      This file must have the debug information of the first kernel to analyze\n");
--- 
-2.7.5
-

SOURCES/kexec-tools-2.0.20-makedumpfile-PATCH-Makefile-Fix-build-errors-in-static-build.patch

@@ -1,65 +0,0 @@
-From 12250baa02584dc713cdb1a12fb366f643fdc8b3 Mon Sep 17 00:00:00 2001
-From: Kazuhito Hagio <k-hagio-ab@nec.com>
-Date: Mon, 9 Mar 2020 17:17:31 -0400
-Subject: [PATCH 5/7] [PATCH] Makefile: Fix build errors in static build
-
-When building makedumpfile statically (without LINKTYPE=dynamic),
-the following error is observed:
-
-  /usr/bin/ld: /usr/lib/makedumpfile-1.6.7/gcc/x86_64-redhat-linux/9/../../../../lib64/libdw.a(lzma.o): in function `__libdw_unlzma':
-  (.text+0xbd): undefined reference to `lzma_auto_decoder'
-  /usr/bin/ld: (.text+0x23a): undefined reference to `lzma_code'
-  /usr/bin/ld: (.text+0x269): undefined reference to `lzma_end'
-  /usr/bin/ld: (.text+0x2aa): undefined reference to `lzma_end'
-  /usr/bin/ld: (.text+0x3ac): undefined reference to `lzma_end'
-  /usr/bin/ld: (.text+0x427): undefined reference to `lzma_end'
-  /usr/bin/ld: (.text+0x62b): undefined reference to `lzma_end'
-  collect2: error: ld returned 1 exit status
-  make: *** [Makefile:97: makedumpfile] Error 1
-
-Also, when doing it with USESNAPPY=on:
-
-  /usr/bin/ld: /usr/local/lib64/libsnappy.a(snappy.cc.o): in function `snappy::internal::WorkingMemory::WorkingMemory(unsigned long)':
-  snappy.cc:(.text+0x7d4): undefined reference to `std::allocator<char>::allocator()'
-  /usr/bin/ld: snappy.cc:(.text+0x803): undefined reference to `std::allocator<char>::~allocator()'
-  /usr/bin/ld: snappy.cc:(.text+0x853): undefined reference to `std::allocator<char>::~allocator()'
-  /usr/bin/ld: /usr/local/lib64/libsnappy.a(snappy.cc.o): in function `snappy::internal::WorkingMemory::~WorkingMemory()':
-  snappy.cc:(.text+0x87e): undefined reference to `std::allocator<char>::allocator()'
-  /usr/bin/ld: snappy.cc:(.text+0x8a8): undefined reference to `std::allocator<char>::~allocator()'
-  ...
-
-Fix these errors by adding -llzma and -lstd++ to LIBS respectively
-if LINKTYPE=dynamic is not specified.
-
-Reported-by: Prabhakar Kushwaha <prabhakar.pkin@gmail.com>
-Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
----
- Makefile | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
-diff --git a/makedumpfile-1.6.7/Makefile b/makedumpfile-1.6.7/Makefile
-index 868eea6..ef20672 100644
---- a/makedumpfile-1.6.7/Makefile
-+++ b/makedumpfile-1.6.7/Makefile
-@@ -52,7 +52,7 @@ OBJ_ARCH=$(patsubst %.c,%.o,$(SRC_ARCH))
- 
- LIBS = -ldw -lbz2 -ldl -lelf -lz
- ifneq ($(LINKTYPE), dynamic)
--LIBS := -static $(LIBS)
-+LIBS := -static $(LIBS) -llzma
- endif
- 
- ifeq ($(USELZO), on)
-@@ -62,6 +62,9 @@ endif
- 
- ifeq ($(USESNAPPY), on)
- LIBS := -lsnappy $(LIBS)
-+ifneq ($(LINKTYPE), dynamic)
-+LIBS := $(LIBS) -lstdc++
-+endif
- CFLAGS += -DUSESNAPPY
- endif
- 
--- 
-2.7.5
-

SOURCES/kexec-tools-2.0.20-makedumpfile-PATCH-Remove-duplicated-variable-definitions.patch

@@ -1,103 +0,0 @@
-From 399f2c9a3acd5bd913e50a4dde52dee6527b297e Mon Sep 17 00:00:00 2001
-From: Kairui Song <kasong@redhat.com>
-Date: Wed, 29 Jan 2020 13:37:13 +0800
-Subject: [PATCH 2/7] [PATCH] Remove duplicated variable definitions
-
-When building on Fedora 32 (with GCC 10), following error is observed:
-
-/usr/bin/ld: erase_info.o:/tmp/makedumpfile/makedumpfile.h:2010: multiple definition of
- `crash_reserved_mem_nr'; elf_info.o:/tmp/makedumpfile/makedumpfile.h:2010: first defined here
-/usr/bin/ld: erase_info.o:/tmp/makedumpfile/makedumpfile.h:2009: multiple definition of
- `crash_reserved_mem'; elf_info.o:/tmp/makedumpfile/makedumpfile.h:2009: first defined here
-/usr/bin/ld: erase_info.o:/tmp/makedumpfile/makedumpfile.h:1278: multiple definition of
- `parallel_info_t'; elf_info.o:/tmp/makedumpfile/makedumpfile.h:1278: first defined here
-/usr/bin/ld: erase_info.o:/tmp/makedumpfile/makedumpfile.h:1265: multiple definition of
- `splitting_info_t'; elf_info.o:/tmp/makedumpfile/makedumpfile.h:1265: first defined here
-...
-collect2: error: ld returned 1 exit status
-make: *** [Makefile:97: makedumpfile] Error 1
-
-These variables are wrongly defined multiple times. So remove the
-duplicated definitions.
-
-Signed-off-by: Kairui Song <kasong@redhat.com>
-Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
----
- makedumpfile.c | 8 ++++----
- makedumpfile.h | 8 ++++----
- 2 files changed, 8 insertions(+), 8 deletions(-)
-
-diff --git a/makedumpfile-1.6.7/makedumpfile.c b/makedumpfile-1.6.7/makedumpfile.c
-index e290fbd..ae7336a 100644
---- a/makedumpfile-1.6.7/makedumpfile.c
-+++ b/makedumpfile-1.6.7/makedumpfile.c
-@@ -10954,7 +10954,7 @@ check_param_for_reassembling_dumpfile(int argc, char *argv[])
- 		return FALSE;
- 
- 	if ((info->splitting_info
--	    = malloc(sizeof(splitting_info_t) * info->num_dumpfile))
-+	    = malloc(sizeof(struct splitting_info) * info->num_dumpfile))
- 	    == NULL) {
- 		MSG("Can't allocate memory for splitting_info.\n");
- 		return FALSE;
-@@ -11042,7 +11042,7 @@ check_param_for_creating_dumpfile(int argc, char *argv[])
- 			return FALSE;
- 		}
- 		if ((info->splitting_info
--		    = malloc(sizeof(splitting_info_t) * info->num_dumpfile))
-+		    = malloc(sizeof(struct splitting_info) * info->num_dumpfile))
- 		    == NULL) {
- 			MSG("Can't allocate memory for splitting_info.\n");
- 			return FALSE;
-@@ -11077,13 +11077,13 @@ check_param_for_creating_dumpfile(int argc, char *argv[])
- 
- 	if (info->num_threads) {
- 		if ((info->parallel_info =
--		     malloc(sizeof(parallel_info_t) * info->num_threads))
-+		     malloc(sizeof(struct parallel_info) * info->num_threads))
- 		    == NULL) {
- 			MSG("Can't allocate memory for parallel_info.\n");
- 			return FALSE;
- 		}
- 
--		memset(info->parallel_info, 0, sizeof(parallel_info_t)
-+		memset(info->parallel_info, 0, sizeof(struct parallel_info)
- 							* info->num_threads);
- 	}
- 
-diff --git a/makedumpfile-1.6.7/makedumpfile.h b/makedumpfile-1.6.7/makedumpfile.h
-index 68d9691..7217407 100644
---- a/makedumpfile-1.6.7/makedumpfile.h
-+++ b/makedumpfile-1.6.7/makedumpfile.h
-@@ -1262,7 +1262,7 @@ struct splitting_info {
- 	mdf_pfn_t		end_pfn;
- 	off_t			offset_eraseinfo;
- 	unsigned long		size_eraseinfo;
--} splitting_info_t;
-+};
- 
- struct parallel_info {
- 	int			fd_memory;
-@@ -1275,7 +1275,7 @@ struct parallel_info {
- #ifdef USELZO
- 	lzo_bytep		wrkmem;
- #endif
--} parallel_info_t;
-+};
- 
- struct ppc64_vmemmap {
- 	unsigned long		phys;
-@@ -2006,8 +2006,8 @@ struct memory_range {
- };
- 
- #define CRASH_RESERVED_MEM_NR   8
--struct memory_range crash_reserved_mem[CRASH_RESERVED_MEM_NR];
--int crash_reserved_mem_nr;
-+extern struct memory_range crash_reserved_mem[CRASH_RESERVED_MEM_NR];
-+extern int crash_reserved_mem_nr;
- 
- unsigned long read_vmcoreinfo_symbol(char *str_symbol);
- int readmem(int type_addr, unsigned long long addr, void *bufptr, size_t size);
--- 
-2.7.5
-

SOURCES/kexec-tools-2.0.20-makedumpfile-PATCH-cope-with-not-present-mem-section.patch

@@ -1,65 +0,0 @@
-From e113f1c974c820f9633dc0073eda525d7575f365 Mon Sep 17 00:00:00 2001
-From: Pingfan Liu <piliu@redhat.com>
-Date: Mon, 20 Jan 2020 10:25:24 +0800
-Subject: [PATCH 3/7] [PATCH] cope with not-present mem section
-
-After kernel commit ba72b4c8cf60 ("mm/sparsemem: support sub-section
-hotplug"), when hot-removed, section_mem_map is still encoded with section
-start pfn, not NULL. This break the current makedumpfile.
-
-  # makedumpfile -x vmlinux -l -d 31 vmcore vmcore.dump
-  get_mem_section: Could not validate mem_section.
-  get_mm_sparsemem: Can't get the address of mem_section.
-
-  makedumpfile Failed.
-
-Whatever section_mem_map coding info after hot-removed, it is reliable
-just to work on SECTION_MARKED_PRESENT bit. Fixing makedumpfile by this
-way.
-
-[ This issue occurs on kernel 5.3 through 5.5, and should be fixed by
-commit 1f503443e7df ("mm/sparse.c: reset section's mem_map when fully
-deactivated") in 5.6-rc1, 5.5.3 and 5.4.19. ]
-
-Signed-off-by: Pingfan Liu <piliu@redhat.com>
-To: kexec@lists.infradead.org
-Cc: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
-Cc: Baoquan He <bhe@redhat.com>
-Cc: David Hildenbrand <david@redhat.com>
-Cc: Andrew Morton <akpm@linux-foundation.org>
-Cc: Dan Williams <dan.j.williams@intel.com>
-Cc: Oscar Salvador <osalvador@suse.de>
-Cc: Michal Hocko <mhocko@kernel.org>
-Cc: Qian Cai <cai@lca.pw>
----
- makedumpfile.c | 6 +-----
- 1 file changed, 1 insertion(+), 5 deletions(-)
-
-diff --git a/makedumpfile-1.6.7/makedumpfile.c b/makedumpfile-1.6.7/makedumpfile.c
-index ae7336a..607e07f 100644
---- a/makedumpfile-1.6.7/makedumpfile.c
-+++ b/makedumpfile-1.6.7/makedumpfile.c
-@@ -3406,8 +3406,6 @@ section_mem_map_addr(unsigned long addr, unsigned long *map_mask)
- 	map = ULONG(mem_section + OFFSET(mem_section.section_mem_map));
- 	mask = SECTION_MAP_MASK;
- 	*map_mask = map & ~mask;
--	if (map == 0x0)
--		*map_mask |= SECTION_MARKED_PRESENT;
- 	map &= mask;
- 	free(mem_section);
- 
-@@ -3453,10 +3451,8 @@ validate_mem_section(unsigned long *mem_sec,
- 			mem_map = NOT_MEMMAP_ADDR;
- 		} else {
- 			mem_map = section_mem_map_addr(section, &map_mask);
-+			/* for either no mem_map or hot-removed */
- 			if (!(map_mask & SECTION_MARKED_PRESENT)) {
--				return FALSE;
--			}
--			if (mem_map == 0) {
- 				mem_map = NOT_MEMMAP_ADDR;
- 			} else {
- 				mem_map = sparse_decode_mem_map(mem_map,
--- 
-2.7.5
-

SOURCES/kexec-tools-2.0.20-makedumpfile-PATCH-sadump-kaslr-fix-failure-of-calculating-kaslr.patch

@@ -1,213 +0,0 @@
-From 3c0cf7a93cff83f1e711e241eb47fcb096a451c5 Mon Sep 17 00:00:00 2001
-From: HATAYAMA Daisuke <d.hatayama@fujitsu.com>
-Date: Thu, 9 Jul 2020 18:27:49 +0900
-Subject: [PATCH] [PATCH] sadump, kaslr: fix failure of calculating
- kaslr_offset due to an sadump format restriction
-
-We faced recently a memory dump collected by sadump where unused part
-of register values are non-zero. For the crash dump, calculating
-kaslr_offset fails because it is based on the assumption that unused
-part of register values in the sadump format are always zero cleared.
-
-The problem is that used and unused part of register values are
-rigorously indistinguishable in the sadump format. Although there is
-kernel data structure that represents a map between logical cpu
-numbers and lapic ids, they cannot be used in order to calculate
-kaslr_offset.
-
-To fix this, we have no choice but use a trial-and-error approach: try
-to use each entry of register values in order until we find a good
-pair of cr3 and idtr by which we can refer to linux_banner symbol as
-expected.
-
-Signed-off-by: HATAYAMA Daisuke <d.hatayama@fujitsu.com>
----
- sadump_info.c | 129 +++++++++++++++++++++++++++++++++++++++++-----------------
- 1 file changed, 91 insertions(+), 38 deletions(-)
-
-diff --git a/makedumpfile-1.6.7/sadump_info.c b/makedumpfile-1.6.7/sadump_info.c
-index 72a077b4f408..410c6bc2a909 100644
---- a/makedumpfile-1.6.7/sadump_info.c
-+++ b/makedumpfile-1.6.7/sadump_info.c
-@@ -101,6 +101,7 @@ static int lookup_diskset(unsigned long long whole_offset, int *diskid,
- 			  unsigned long long *disk_offset);
- static int max_mask_cpu(void);
- static int cpu_online_mask_init(void);
-+static int linux_banner_sanity_check(ulong cr3);
- static int per_cpu_init(void);
- static int get_data_from_elf_note_desc(const char *note_buf, uint32_t n_descsz,
- 				       char *name, uint32_t n_type, char **data);
-@@ -1293,6 +1294,30 @@ finish:
- 	return ret;
- }
- 
-+static int linux_banner_sanity_check(ulong cr3)
-+{
-+	unsigned long linux_banner_paddr;
-+	char buf[sizeof("Linux version")];
-+
-+	linux_banner_paddr = vtop4_x86_64_pagetable(SYMBOL(linux_banner), cr3);
-+	if (linux_banner_paddr == NOT_PADDR) {
-+		DEBUG_MSG("sadump: linux_banner address translation failed\n");
-+		return FALSE;
-+	}
-+
-+	if (!readmem(PADDR, linux_banner_paddr, &buf, sizeof(buf))) {
-+		DEBUG_MSG("sadump: reading linux_banner failed\n");
-+		return FALSE;
-+	}
-+
-+	if (!STRNEQ(buf, "Linux version")) {
-+		DEBUG_MSG("sadump: linux_banner sanity check failed\n");
-+		return FALSE;
-+	}
-+
-+	return TRUE;
-+}
-+
- /*
-  * Calculate kaslr_offset and phys_base
-  *
-@@ -1370,59 +1395,85 @@ calc_kaslr_offset(void)
- {
- 	struct sadump_header *sh = si->sh_memory;
- 	uint64_t idtr = 0, cr3 = 0, idtr_paddr;
--	struct sadump_smram_cpu_state smram, zero;
-+	struct sadump_smram_cpu_state smram;
- 	int apicid;
- 	unsigned long divide_error_vmcore, divide_error_vmlinux;
- 	unsigned long kaslr_offset, phys_base;
- 	unsigned long kaslr_offset_kdump, phys_base_kdump;
-+	int sanity_check_passed = FALSE;
- 
--	memset(&zero, 0, sizeof(zero));
- 	for (apicid = 0; apicid < sh->nr_cpus; ++apicid) {
-+
-+		DEBUG_MSG("sadump: apicid: %d\n", apicid);
-+
- 		if (!get_smram_cpu_state(apicid, &smram)) {
- 			ERRMSG("get_smram_cpu_state error\n");
- 			return FALSE;
- 		}
- 
--		if (memcmp(&smram, &zero, sizeof(smram)) != 0)
--			break;
--	}
--	if (apicid >= sh->nr_cpus) {
--		ERRMSG("Can't get smram state\n");
--		return FALSE;
--	}
-+		idtr = ((uint64_t)smram.IdtUpper)<<32|(uint64_t)smram.IdtLower;
- 
--	idtr = ((uint64_t)smram.IdtUpper)<<32 | (uint64_t)smram.IdtLower;
--	if ((SYMBOL(pti_init) != NOT_FOUND_SYMBOL) ||
--	    (SYMBOL(kaiser_init) != NOT_FOUND_SYMBOL))
--		cr3 = smram.Cr3 & ~(CR3_PCID_MASK|PTI_USER_PGTABLE_MASK);
--	else
--		cr3 = smram.Cr3 & ~CR3_PCID_MASK;
-+		if (!smram.Cr3 || !idtr) {
-+			DEBUG_MSG("sadump: cr3: %lx idt: %lx, skipped\n",
-+				  smram.Cr3, idtr);
-+			continue;
-+		}
- 
--	/* Convert virtual address of IDT table to physical address */
--	if ((idtr_paddr = vtop4_x86_64_pagetable(idtr, cr3)) == NOT_PADDR)
--		return FALSE;
-+		if ((SYMBOL(pti_init) != NOT_FOUND_SYMBOL) ||
-+		    (SYMBOL(kaiser_init) != NOT_FOUND_SYMBOL))
-+			cr3 = smram.Cr3 & ~(CR3_PCID_MASK|PTI_USER_PGTABLE_MASK);
-+		else
-+			cr3 = smram.Cr3 & ~CR3_PCID_MASK;
- 
--	/* Now we can calculate kaslr_offset and phys_base */
--	divide_error_vmlinux = SYMBOL(divide_error);
--	divide_error_vmcore = get_vec0_addr(idtr_paddr);
--	kaslr_offset = divide_error_vmcore - divide_error_vmlinux;
--	phys_base = idtr_paddr -
--		(SYMBOL(idt_table) + kaslr_offset - __START_KERNEL_map);
-+		/* Convert virtual address of IDT table to physical address */
-+		idtr_paddr = vtop4_x86_64_pagetable(idtr, cr3);
-+		if (idtr_paddr == NOT_PADDR) {
-+			DEBUG_MSG("sadump: converting IDT physical address "
-+				  "failed.\n");
-+			continue;
-+		}
- 
--	info->kaslr_offset = kaslr_offset;
--	info->phys_base = phys_base;
-+		/* Now we can calculate kaslr_offset and phys_base */
-+		divide_error_vmlinux = SYMBOL(divide_error);
-+		divide_error_vmcore = get_vec0_addr(idtr_paddr);
-+		kaslr_offset = divide_error_vmcore - divide_error_vmlinux;
-+		phys_base = idtr_paddr -
-+			(SYMBOL(idt_table)+kaslr_offset-__START_KERNEL_map);
- 
--	DEBUG_MSG("sadump: idtr=%" PRIx64 "\n", idtr);
--	DEBUG_MSG("sadump: cr3=%" PRIx64 "\n", cr3);
--	DEBUG_MSG("sadump: idtr(phys)=%" PRIx64 "\n", idtr_paddr);
--	DEBUG_MSG("sadump: devide_error(vmlinux)=%lx\n",
--		divide_error_vmlinux);
--	DEBUG_MSG("sadump: devide_error(vmcore)=%lx\n",
--		divide_error_vmcore);
-+		info->kaslr_offset = kaslr_offset;
-+		info->phys_base = phys_base;
- 
--	/* Reload symbol */
--	if (!get_symbol_info())
--		return FALSE;
-+		DEBUG_MSG("sadump: idtr=%" PRIx64 "\n", idtr);
-+		DEBUG_MSG("sadump: cr3=%" PRIx64 "\n", cr3);
-+		DEBUG_MSG("sadump: idtr(phys)=%" PRIx64 "\n", idtr_paddr);
-+		DEBUG_MSG("sadump: devide_error(vmlinux)=%lx\n",
-+			  divide_error_vmlinux);
-+		DEBUG_MSG("sadump: devide_error(vmcore)=%lx\n",
-+			  divide_error_vmcore);
-+
-+		/* Reload symbol */
-+		if (!get_symbol_info()) {
-+			ERRMSG("Reading symbol table failed\n");
-+			return FALSE;
-+		}
-+
-+		/* Sanity check */
-+		if (linux_banner_sanity_check(cr3)) {
-+			sanity_check_passed = TRUE;
-+			break;
-+		}
-+
-+		info->kaslr_offset = 0;
-+		info->phys_base = 0;
-+	}
-+
-+	if (!sanity_check_passed) {
-+		ERRMSG("failed to calculate kaslr_offset and phys_base; "
-+		       "default to 0\n");
-+		info->kaslr_offset = 0;
-+		info->phys_base = 0;
-+		return TRUE;
-+	}
- 
- 	/*
- 	 * Check if current kaslr_offset/phys_base is for 1st kernel or 2nd
-@@ -1430,13 +1481,15 @@ calc_kaslr_offset(void)
- 	 * from vmcoreinfo
- 	 */
- 	if (get_kaslr_offset_from_vmcoreinfo(cr3, &kaslr_offset_kdump,
--					    &phys_base_kdump)) {
-+					     &phys_base_kdump)) {
- 		info->kaslr_offset = kaslr_offset_kdump;
- 		info->phys_base = phys_base_kdump;
- 
- 		/* Reload symbol */
--		if (!get_symbol_info())
-+		if (!get_symbol_info()) {
-+			ERRMSG("Reading symbol table failed\n");
- 			return FALSE;
-+		}
- 	}
- 
- 	DEBUG_MSG("sadump: kaslr_offset=%lx\n", info->kaslr_offset);
--- 
-2.7.4
-

SOURCES/kexec-tools-2.0.20-vmcore-dmesg-vmcore-dmesg.c-Fix-shifting-error-repor.patch

@@ -1,38 +0,0 @@
-From a46c686f615a86933134c0924c3391ba598a02b8 Mon Sep 17 00:00:00 2001
-From: Bhupesh Sharma <bhsharma@redhat.com>
-Date: Tue, 10 Sep 2019 15:51:49 +0530
-Subject: [PATCH 5/5] vmcore-dmesg/vmcore-dmesg.c: Fix shifting error reported
- by cppcheck
-
-Running 'cppcheck' static code analyzer (see cppcheck(1))
- on 'vmcore-dmesg/vmcore-dmesg.c' shows the following
-shifting error:
-
-$ cppcheck  --enable=all  vmcore-dmesg/vmcore-dmesg.c
-Checking vmcore-dmesg/vmcore-dmesg.c ...
-[vmcore-dmesg/vmcore-dmesg.c:17]: (error) Shifting signed 32-bit value by 31 bits is undefined behaviour
-
-Fix the same via this patch.
-
-Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
-Signed-off-by: Simon Horman <horms@verge.net.au>
----
- vmcore-dmesg/vmcore-dmesg.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/vmcore-dmesg/vmcore-dmesg.c b/vmcore-dmesg/vmcore-dmesg.c
-index 81c2a58c9d86..122e53672e01 100644
---- a/vmcore-dmesg/vmcore-dmesg.c
-+++ b/vmcore-dmesg/vmcore-dmesg.c
-@@ -6,7 +6,7 @@ typedef Elf32_Nhdr Elf_Nhdr;
- extern const char *fname;
- 
- /* stole this macro from kernel printk.c */
--#define LOG_BUF_LEN_MAX (uint32_t)(1 << 31)
-+#define LOG_BUF_LEN_MAX (uint32_t)(1U << 31)
- 
- static void write_to_stdout(char *buf, unsigned int nr)
- {
--- 
-2.17.1
-

SOURCES/kexec-tools-2.0.26-makedumpfile-sadump-fix-failure-of-reading-memory-when-5-le.patch

@@ -0,0 +1,72 @@
+From 58553ad03187f0cf208d6c4a0dc026c6338e5edd Mon Sep 17 00:00:00 2001
+From: "Daisuke Hatayama (Fujitsu)" <d.hatayama@fujitsu.com>
+Date: Wed, 29 Mar 2023 12:44:10 +0000
+Subject: [PATCH] [PATCH] sadump: fix failure of reading memory when 5-level
+ paging is enabled
+
+makedumpfile fails as follows for memory dumps collected by sadump
+when 5-level paging is enabled on the corresponding systems:
+
+    # makedumpfile -l -d 31 -x ./vmlinux ./dump.sadump dump.sadump-ld31
+    __vtop4_x86_64: Can't get a valid pgd.
+    ...snip...
+    __vtop4_x86_64: Can't get a valid pgd.
+    calc_kaslr_offset: failed to calculate kaslr_offset and phys_base; default to 0
+    __vtop4_x86_64: Can't get a valid pgd.
+    readmem: Can't convert a virtual address(ffffffff82fce960) to physical address.
+    readmem: type_addr: 0, addr:ffffffff82fce960, size:1024
+    cpu_online_mask_init: Can't read cpu_online_mask memory.
+
+    makedumpfile Failed.
+
+This is because 5-level paging support has not been done yet for
+sadump; the work of the 5-level paging support was done by the commit
+30a3214a7193e94c551c0cebda5918a72a35c589 (PATCH 4/4 arch/x86_64: Add
+5-level paging support) but that was focused on the core part only.
+
+Having said that, most of things has already been finished in the
+commit. What needs to be newly added for sadump is just how to check
+if 5-level paging is enabled for a given memory dump.
+
+For that purpose, let's refer to CR4.LA57, bit 12 of CR4, representing
+whether 5-level paging is enabled or not. We can do this because
+memory dumps collected by sadump have SMRAM as note information and
+they include CR4 together with the other control registers.
+
+Signed-off-by: HATAYAMA Daisuke <d.hatayama@fujitsu.com>
+---
+ sadump_info.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/makedumpfile-1.7.2/sadump_info.c b/makedumpfile-1.7.2/sadump_info.c
+index adfa8dc..2c44068 100644
+--- a/makedumpfile-1.7.2/sadump_info.c
++++ b/makedumpfile-1.7.2/sadump_info.c
+@@ -1362,6 +1362,7 @@ static int linux_banner_sanity_check(ulong cr3)
+ #define PTI_USER_PGTABLE_BIT		(info->page_shift)
+ #define PTI_USER_PGTABLE_MASK		(1 << PTI_USER_PGTABLE_BIT)
+ #define CR3_PCID_MASK			0xFFFull
++#define CR4_LA57			(1 << 12)
+ int
+ calc_kaslr_offset(void)
+ {
+@@ -1397,6 +1398,8 @@ calc_kaslr_offset(void)
+ 		else
+ 			cr3 = smram.Cr3 & ~CR3_PCID_MASK;
+ 
++		NUMBER(pgtable_l5_enabled) = !!(smram.Cr4 & CR4_LA57);
++
+ 		/* Convert virtual address of IDT table to physical address */
+ 		idtr_paddr = vtop4_x86_64_pagetable(idtr, cr3);
+ 		if (idtr_paddr == NOT_PADDR) {
+@@ -1417,6 +1420,7 @@ calc_kaslr_offset(void)
+ 
+ 		DEBUG_MSG("sadump: idtr=%" PRIx64 "\n", idtr);
+ 		DEBUG_MSG("sadump: cr3=%" PRIx64 "\n", cr3);
++		DEBUG_MSG("sadump: cr4=%" PRIx32 "\n", smram.Cr4);
+ 		DEBUG_MSG("sadump: idtr(phys)=%" PRIx64 "\n", idtr_paddr);
+ 		DEBUG_MSG("sadump: devide_error(vmlinux)=%lx\n",
+ 			  divide_error_vmlinux);
+-- 
+2.31.1
+

SOURCES/mkdumprd

@@ -6,18 +6,30 @@
 # Written by Cong Wang <amwang@redhat.com>
 #
 
+if [ -f /etc/sysconfig/kdump ]; then
+	. /etc/sysconfig/kdump
+fi
+
 [[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
 . $dracutbasedir/dracut-functions.sh
 . /lib/kdump/kdump-lib.sh
+. /lib/kdump/kdump-logger.sh
 export IN_KDUMP=1
 
+#initiate the kdump logger
+dlog_init
+if [ $? -ne 0 ]; then
+	echo "failed to initiate the kdump logger."
+	exit 1
+fi
+
 conf_file="/etc/kdump.conf"
 SSH_KEY_LOCATION="/root/.ssh/kdump_id_rsa"
 SAVE_PATH=$(get_save_path)
 OVERRIDE_RESETTABLE=0
 
 extra_modules=""
-dracut_args="--quiet --hostonly --hostonly-cmdline --hostonly-i18n --hostonly-mode strict -o \"plymouth dash resume ifcfg earlykdump\""
+dracut_args="--add kdumpbase --quiet --hostonly --hostonly-cmdline --hostonly-i18n --hostonly-mode strict --hostonly-nics '' -o \"plymouth dash resume ifcfg earlykdump\" --compress=xz"
 
 readonly MKDUMPRD_TMPDIR="$(mktemp -d -t mkdumprd.XXXXXX)"
 [ -d "$MKDUMPRD_TMPDIR" ] || perror_exit "dracut: mktemp -p -d -t dracut.XXXXXX failed."
@@ -33,28 +45,10 @@ trap '
 # clean up after ourselves no matter how we die.
 trap 'exit 1;' SIGINT
 
-is_wdt_addition_needed() {
-	local active
-
-	is_wdt_mod_omitted
-	[[ $? -eq 0 ]] && return 1
-	[[ -d /sys/class/watchdog/ ]] || return 1
-	for dir in /sys/class/watchdog/*; do
-		[[ -f "$dir/state" ]] || continue
-		active=$(< "$dir/state")
-		[[ "$active" =  "active" ]] && return 0
-	done
-	return 1
-}
-
 add_dracut_arg() {
     dracut_args="$dracut_args $@"
 }
 
-add_dracut_module() {
-    add_dracut_arg "--add" "\"$1\""
-}
-
 add_dracut_mount() {
     add_dracut_arg "--mount" "\"$1\""
 }
@@ -74,8 +68,8 @@ to_mount() {
 
     if [[ "$_fstype" == "nfs"* ]]; then
         _pdev=$_target
-        _options=$(echo $_options | sed 's/,addr=[^,]*//')
-        _options=$(echo $_options | sed 's/,proto=[^,]*//')
+        _options=$(echo $_options | sed 's/,\(mount\)\?addr=[^,]*//g')
+        _options=$(echo $_options | sed 's/,\(mount\)\?proto=[^,]*//g')
         _options=$(echo $_options | sed 's/,clientaddr=[^,]*//')
     else
         # for non-nfs _target converting to use udev persistent name
@@ -177,8 +171,8 @@ check_size() {
     fi
 
     if [ $avail -lt $memtotal ]; then
-        echo "Warning: There might not be enough space to save a vmcore."
-        echo "         The size of $2 should be greater than $memtotal kilo bytes."
+        dwarn "Warning: There might not be enough space to save a vmcore."
+        dwarn "         The size of $2 should be greater than $memtotal kilo bytes."
     fi
 }
 
@@ -246,11 +240,11 @@ check_user_configured_target()
 # $1: core_collector config value
 verify_core_collector() {
     local _cmd="${1%% *}"
-    local _params="${1#* }"
+    local _params="${1#${_cmd}}"
 
     if [ "$_cmd" != "makedumpfile" ]; then
         if is_raw_dump_target; then
-            echo "Warning: specifying a non-makedumpfile core collector, you will have to recover the vmcore manually."
+            dwarn "Warning: specifying a non-makedumpfile core collector, you will have to recover the vmcore manually."
         fi
         return
     fi
@@ -311,7 +305,6 @@ get_override_resettable()
     fi
 }
 
-
 # $1: function name
 for_each_block_target()
 {
@@ -326,8 +319,6 @@ for_each_block_target()
     return 0
 }
 
-
-
 #judge if a specific device with $1 is unresettable
 #return false if unresettable.
 is_unresettable()
@@ -340,7 +331,7 @@ is_unresettable()
         resettable="$(cat $path)"
         [ $resettable -eq 0 -a "$OVERRIDE_RESETTABLE" -eq 0 ] && {
             local device=$(udevadm info --query=all --path=/sys/dev/block/$1 | awk -F= '/DEVNAME/{print $2}')
-            echo "Error: Can not save vmcore because device $device is unresettable"
+            derror "Error: Can not save vmcore because device $device is unresettable"
             return 0
         }
     fi
@@ -364,32 +355,15 @@ check_resettable()
     return 1
 }
 
-# $1: maj:min
-is_crypt()
-{
-    local majmin=$1 dev line ID_FS_TYPE=""
-
-    line=$(udevadm info --query=property --path=/sys/dev/block/$majmin \
-            | grep "^ID_FS_TYPE")
-    eval "$line"
-    [[ "$ID_FS_TYPE" = "crypto_LUKS" ]] && {
-        dev=$(udevadm info --query=all --path=/sys/dev/block/$majmin | awk -F= '/DEVNAME/{print $2}')
-        echo "Device $dev is encrypted."
-        return 0
-    }
-    return 1
-}
-
 check_crypt()
 {
-    local _ret _target
+    local _dev
 
-    for_each_block_target is_crypt
-    _ret=$?
-
-    [ $_ret -eq 0 ] && return
-
-    return 1
+    for _dev in $(get_kdump_targets); do
+        if [[ -n $(get_luks_crypt_dev "$(get_maj_min "$_dev")") ]]; then
+            derror "Device $_dev is encrypted." && return 1
+        fi
+    done
 }
 
 if ! check_resettable; then
@@ -397,7 +371,7 @@ if ! check_resettable; then
 fi
 
 if ! check_crypt; then
-    echo "Warning: Encrypted device is in dump path. User will prompted for password during second kernel boot." 
+    dwarn "Warning: Encrypted device is in dump path. User will prompted for password during second kernel boot." 
 fi
 
 # firstly get right SSH_KEY_LOCATION
@@ -407,14 +381,6 @@ if [ -f "$keyfile" ]; then
     SSH_KEY_LOCATION=$(/usr/bin/readlink -m $keyfile)
 fi
 
-if [ "$(uname -m)" = "s390x" ]; then
-    add_dracut_module "znet"
-fi
-
-if is_wdt_addition_needed; then
-    add_dracut_arg "-a" "watchdog"
-fi
-
 while read config_opt config_val;
 do
     # remove inline comments after the end of a directive.
@@ -443,7 +409,6 @@ do
         then
             mkdir_save_path_ssh $config_val
             check_size ssh $config_val
-            add_dracut_module "ssh-client"
             add_dracut_sshkey "$SSH_KEY_LOCATION"
         else
             perror_exit "Bad ssh dump target $config_val"
@@ -467,16 +432,21 @@ then
     add_dracut_arg "--add-drivers" \"$extra_modules\"
 fi
 
+# TODO: The below check is not needed anymore with the introduction of
+#       'zz-fadumpinit' module, that isolates fadump's capture kernel initrd,
+#       but still sysroot.mount unit gets generated based on 'root=' kernel
+#       parameter available in fadump case. So, find a way to fix that first
+#       before removing this check.
 if ! is_fadump_capable; then
     # The 2nd rootfs mount stays behind the normal dump target mount,
     # so it doesn't affect the logic of check_dump_fs_modified().
     is_dump_to_rootfs && add_mount "$(to_dev_name $(get_root_fs_device))"
 
-    add_dracut_arg "--no-hostonly-default-device"
+	add_dracut_arg "--no-hostonly-default-device"
+
+	if fips-mode-setup --is-enabled 2> /dev/null; then
+		add_dracut_arg --add-device "$(findmnt -n -o SOURCE --target /boot)"
+	fi
 fi
 
 echo "$dracut_args $@" | xargs dracut
-
-_rc=$?
-sync
-exit $_rc

SOURCES/mkdumprd.8

@@ -15,7 +15,13 @@ be loaded in the initramfs (based on configuration retrieved from
 \fI/etc/kdump.conf)\fR
 
 \fBmkdumprd\fR add a new \fBdracut\fR module 99kdumpbase and use \fBdracut\fR
-utility to generate the initramfs.
+utility to generate the initramfs. When generating a kdump initramfs, \fBmkdumprd\fR
+will determine how much disk space is available, if the dump target's available
+space is not greater than the total system memory, \fBmkdumprd\fR will print a
+warning to remind that there might not be enough space to save a vmcore. The
+warning covers extreme scenarios such as the slab explodes with non-zero data or
+a full vmcore, etc. Therefore, need to prevent users from having minimum disk
+space for crash dump.
 
 \fBmkdumprd\fR was not intended for casual use outside of the service
 initialization script for the kdump utility, and should not be run manually.  If

SOURCES/mkfadumprd

@@ -0,0 +1,64 @@
+#!/bin/bash --norc
+# Generate an initramfs image that isolates dump capture capability within
+# the default initramfs using zz-fadumpinit dracut module.
+
+if [ -f /etc/sysconfig/kdump ]; then
+	. /etc/sysconfig/kdump
+fi
+
+[[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
+. $dracutbasedir/dracut-functions.sh
+. /lib/kdump/kdump-lib.sh
+. /lib/kdump/kdump-logger.sh
+
+#initiate the kdump logger
+if ! dlog_init; then
+	echo "mkfadumprd: failed to initiate the kdump logger."
+	exit 1
+fi
+
+readonly MKFADUMPRD_TMPDIR="$(mktemp -d -t mkfadumprd.XXXXXX)"
+[ -d "$MKFADUMPRD_TMPDIR" ] || perror_exit "mkfadumprd: mktemp -d -t mkfadumprd.XXXXXX failed."
+trap '
+    ret=$?;
+    [[ -d $MKFADUMPRD_TMPDIR ]] && rm --one-file-system -rf -- "$MKFADUMPRD_TMPDIR";
+    exit $ret;
+    ' EXIT
+
+# clean up after ourselves no matter how we die.
+trap 'exit 1;' SIGINT
+
+MKDUMPRD="/sbin/mkdumprd -f"
+# Default boot initramfs to be rebuilt
+REBUILD_INITRD="$1" && shift
+TARGET_INITRD="$1" && shift
+FADUMP_INITRD="$MKFADUMPRD_TMPDIR/fadump.img"
+
+### First build an initramfs with dump capture capability
+# this file tells the initrd is fadump enabled
+touch "$MKFADUMPRD_TMPDIR/fadump.initramfs"
+ddebug "rebuild fadump initrd: $FADUMP_INITRD $DEFAULT_INITRD $KDUMP_KERNELVER"
+if ! $MKDUMPRD "$FADUMP_INITRD" -i "$MKFADUMPRD_TMPDIR/fadump.initramfs" /etc/fadump.initramfs; then
+	perror_exit "mkfadumprd: failed to build image with dump capture support"
+fi
+
+### Unpack the initramfs having dump capture capability
+mkdir -p "$MKFADUMPRD_TMPDIR/fadumproot"
+if ! (pushd "$MKFADUMPRD_TMPDIR/fadumproot" > /dev/null && lsinitrd --unpack "$FADUMP_INITRD" && \
+	popd > /dev/null); then
+	derror "mkfadumprd: failed to unpack '$MKFADUMPRD_TMPDIR'"
+	exit 1
+fi
+
+### Pack it into the normal boot initramfs with zz-fadumpinit module
+_dracut_isolate_args="--rebuild $REBUILD_INITRD --add zz-fadumpinit \
+	-i $MKFADUMPRD_TMPDIR/fadumproot /fadumproot \
+	-i $MKFADUMPRD_TMPDIR/fadumproot/usr/lib/dracut/loaded-kernel-modules.txt
+	   /usr/lib/dracut/fadump-kernel-modules.txt"
+
+if is_squash_available; then
+	_dracut_isolate_args="$_dracut_isolate_args --add squash"
+fi
+if ! dracut --force --quiet $_dracut_isolate_args $@ "$TARGET_INITRD"; then
+	perror_exit "mkfadumprd: failed to setup '$TARGET_INITRD' with dump capture capability"
+fi

SOURCES/rhelonly-kexec-tools-2.0.20-makedumpfile-arm64-Add-support-for-ARMv8.2-LVA-52-bi.patch

@@ -0,0 +1,88 @@
+From 0f632fa180e5a44219ab6bbe0879c3583f8c65cf Mon Sep 17 00:00:00 2001
+From: Pingfan Liu <piliu@redhat.com>
+Date: Tue, 9 Nov 2021 11:24:22 +0800
+Subject: [PATCH] RHEL-only
+
+Cope with RHEL8 kernel
+
+Signed-off-by: Pingfan Liu <piliu@redhat.com>
+---
+ arch/arm64.c   | 14 +++++++++++++-
+ makedumpfile.c |  2 ++
+ makedumpfile.h |  1 +
+ 3 files changed, 16 insertions(+), 1 deletion(-)
+
+diff --git a/makedumpfile-1.7.2/arch/arm64.c b/makedumpfile-1.7.2/arch/arm64.c
+index 1072178..95beae6 100644
+--- a/makedumpfile-1.7.2/arch/arm64.c
++++ b/makedumpfile-1.7.2/arch/arm64.c
+@@ -50,6 +50,7 @@ static int va_bits;
+ static int vabits_actual;
+ static int flipped_va;
+ static unsigned long kimage_voffset;
++static int max_user_va_bits;
+ 
+ #define SZ_4K			4096
+ #define SZ_16K			16384
+@@ -108,7 +109,7 @@ typedef unsigned long pgdval_t;
+ #define PGDIR_SHIFT		ARM64_HW_PGTABLE_LEVEL_SHIFT(4 - (pgtable_level))
+ #define PGDIR_SIZE		(_AC(1, UL) << PGDIR_SHIFT)
+ #define PGDIR_MASK		(~(PGDIR_SIZE-1))
+-#define PTRS_PER_PGD		(1 << ((va_bits) - PGDIR_SHIFT))
++#define PTRS_PER_PGD           (1 << ((max_user_va_bits) - PGDIR_SHIFT))
+ 
+ /*
+  * Section address mask and size definitions.
+@@ -449,6 +450,17 @@ get_machdep_info_arm64(void)
+ 		ERRMSG("Can't determine platform config values\n");
+ 		return FALSE;
+ 	}
++	if (NUMBER(MAX_USER_VA_BITS) != NOT_FOUND_NUMBER) {
++		max_user_va_bits = NUMBER(MAX_USER_VA_BITS);
++		DEBUG_MSG("max_user_va_bits : %d (vmcoreinfo)\n",
++		                max_user_va_bits);
++	}
++	if (!max_user_va_bits) {
++		max_user_va_bits = va_bits;
++		DEBUG_MSG("max_user_va_bits : %d (default = va_bits)\n",
++		                max_user_va_bits);
++	}
++
+ 
+ 	kimage_voffset = NUMBER(kimage_voffset);
+ 	info->section_size_bits = SECTIONS_SIZE_BITS;
+diff --git a/makedumpfile-1.7.2/makedumpfile.c b/makedumpfile-1.7.2/makedumpfile.c
+index 3ad4443..018ea4c 100644
+--- a/makedumpfile-1.7.2/makedumpfile.c
++++ b/makedumpfile-1.7.2/makedumpfile.c
+@@ -2417,6 +2417,7 @@ write_vmcoreinfo_data(void)
+ 
+ 	WRITE_NUMBER("HUGETLB_PAGE_DTOR", HUGETLB_PAGE_DTOR);
+ #ifdef __aarch64__
++	WRITE_NUMBER("MAX_USER_VA_BITS", MAX_USER_VA_BITS);
+ 	WRITE_NUMBER("VA_BITS", VA_BITS);
+ 	/* WRITE_NUMBER("TCR_EL1_T1SZ", TCR_EL1_T1SZ); should not exists */
+ 	WRITE_NUMBER_UNSIGNED("PHYS_OFFSET", PHYS_OFFSET);
+@@ -2863,6 +2864,7 @@ read_vmcoreinfo(void)
+ 	READ_NUMBER("phys_base", phys_base);
+ 	READ_NUMBER("KERNEL_IMAGE_SIZE", KERNEL_IMAGE_SIZE);
+ #ifdef __aarch64__
++	READ_NUMBER("MAX_USER_VA_BITS", MAX_USER_VA_BITS);
+ 	READ_NUMBER("VA_BITS", VA_BITS);
+ 	READ_NUMBER("TCR_EL1_T1SZ", TCR_EL1_T1SZ);
+ 	READ_NUMBER_UNSIGNED("PHYS_OFFSET", PHYS_OFFSET);
+diff --git a/makedumpfile-1.7.2/makedumpfile.h b/makedumpfile-1.7.2/makedumpfile.h
+index e59239d..b6236dd 100644
+--- a/makedumpfile-1.7.2/makedumpfile.h
++++ b/makedumpfile-1.7.2/makedumpfile.h
+@@ -2064,6 +2064,7 @@ struct number_table {
+ 	long	phys_base;
+ 	long	KERNEL_IMAGE_SIZE;
+ #ifdef __aarch64__
++	long    MAX_USER_VA_BITS;
+ 	long 	VA_BITS;
+ 	long	TCR_EL1_T1SZ;
+ 	unsigned long	PHYS_OFFSET;
+-- 
+2.31.1
+

SOURCES/rhonly-kexec-tools-2.0.18-makedumpfile-arm64-Add-support-for-ARMv8.2-LVA-52-bi.patch

@@ -1,235 +0,0 @@
-From: Bhupesh Sharma <bhsharma@redhat.com>
-Date: Wed, 6 Feb 2019 12:31:29 +0530
-Subject: [PATCH] makedumpfile/arm64: Add support for ARMv8.2-LVA (52-bit
- user-space VA support)
-
-With ARMv8.2-LVA architecture extension availability, arm64 hardware
-which supports this extension can support upto 52-bit virtual
-addresses. It is specially useful for having a 52-bit user-space virtual
-address space while the kernel can still retain 48-bit virtual
-addresses.
-
-Since at the moment we enable the support of this extension in the
-kernel via a CONFIG flag (CONFIG_ARM64_USER_VA_BITS_52), so there are
-no clear mechanisms in user-space to determine this CONFIG
-flag value and use it to determine the user-space VA address range
-values.
-
-'makedumpfile' can instead use 'MAX_USER_VA_BITS' value to
-determine the maximum virtual physical address supported by user-space.
-If 'MAX_USER_VA_BITS' value is greater than 'VA_BITS' than we are
-running a use-case where user-space is 52-bit and underlying kernel is
-still 48-bit. The increased 'PTRS_PER_PGD' value for such cases can then
-be calculated as is done by the underlying kernel (see kernel file
-'arch/arm64/include/asm/pgtable-hwdef.h' for details):
-
-  #define PTRS_PER_PGD          (1 << (MAX_USER_VA_BITS - PGDIR_SHIFT))
-
-I have sent a kernel patch upstream to add 'MAX_USER_VA_BITS' to
-vmcoreinfo for arm64 (see [0]).
-
-This patch is in accordance with ARMv8 Architecture Reference Manual
-version D.a
-
-[0].
-http://lists.infradead.org/pipermail/kexec/2019-February/022411.html
-
-Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
-
----
- arch/arm64.c   | 109 ++++++++++++++++++++++++++++++++++++++++++---------------
- makedumpfile.c |   2 ++
- makedumpfile.h |   1 +
- 3 files changed, 83 insertions(+), 29 deletions(-)
-
-diff --git a/makedumpfile-1.6.7/arch/arm64.c b/makedumpfile-1.6.7/arch/arm64.c
-index 0535193..5fcf59d 100644
---- a/makedumpfile-1.6.7/arch/arm64.c
-+++ b/makedumpfile-1.6.7/arch/arm64.c
-@@ -41,6 +41,7 @@ typedef struct {
- 
- static int pgtable_level;
- static int va_bits;
-+static int max_user_va_bits;
- static unsigned long kimage_voffset;
- 
- #define SZ_4K			(4 * 1024)
-@@ -61,7 +62,7 @@ static unsigned long kimage_voffset;
- 
- #define PAGE_MASK		(~(PAGESIZE() - 1))
- #define PGDIR_SHIFT		((PAGESHIFT() - 3) * pgtable_level + 3)
--#define PTRS_PER_PGD		(1 << (va_bits - PGDIR_SHIFT))
-+#define PTRS_PER_PGD		(1 << ((max_user_va_bits) - PGDIR_SHIFT))
- #define PUD_SHIFT		get_pud_shift_arm64()
- #define PUD_SIZE		(1UL << PUD_SHIFT)
- #define PUD_MASK		(~(PUD_SIZE - 1))
-@@ -73,6 +74,10 @@ static unsigned long kimage_voffset;
- #define PTRS_PER_PMD		PTRS_PER_PTE
- 
- #define PAGE_PRESENT		(1 << 0)
-+
-+/*
-+ * Section address mask and size definitions.
-+ */
- #define SECTIONS_SIZE_BITS	30
- /* Highest possible physical address supported */
- #define PHYS_MASK_SHIFT		48
-@@ -284,14 +289,83 @@ get_stext_symbol(void)
- 	return(found ? kallsym : FALSE);
- }
- 
-+static int
-+get_va_bits_from_stext_arm64(void)
-+{
-+	ulong _stext;
-+
-+	_stext = get_stext_symbol();
-+	if (!_stext) {
-+		ERRMSG("Can't get the symbol of _stext.\n");
-+		return FALSE;
-+	}
-+
-+	/* Derive va_bits as per arch/arm64/Kconfig */
-+	if ((_stext & PAGE_OFFSET_36) == PAGE_OFFSET_36) {
-+		va_bits = 36;
-+	} else if ((_stext & PAGE_OFFSET_39) == PAGE_OFFSET_39) {
-+		va_bits = 39;
-+	} else if ((_stext & PAGE_OFFSET_42) == PAGE_OFFSET_42) {
-+		va_bits = 42;
-+	} else if ((_stext & PAGE_OFFSET_47) == PAGE_OFFSET_47) {
-+		va_bits = 47;
-+	} else if ((_stext & PAGE_OFFSET_48) == PAGE_OFFSET_48) {
-+		va_bits = 48;
-+	} else {
-+		ERRMSG("Cannot find a proper _stext for calculating VA_BITS\n");
-+		return FALSE;
-+	}
-+
-+	DEBUG_MSG("va_bits      : %d\n", va_bits);
-+
-+	return TRUE;
-+}
-+
-+static void
-+get_page_offset_arm64(void)
-+{
-+	info->page_offset = (0xffffffffffffffffUL) << (va_bits - 1);
-+
-+	DEBUG_MSG("page_offset  : %lx\n", info->page_offset);
-+}
-+
- int
- get_machdep_info_arm64(void)
- {
- 	/* Check if va_bits is still not initialized. If still 0, call
- 	 * get_versiondep_info() to initialize the same.
- 	 */
-+	if (NUMBER(VA_BITS) != NOT_FOUND_NUMBER) {
-+		va_bits = NUMBER(VA_BITS);
-+		DEBUG_MSG("va_bits    : %d (vmcoreinfo)\n",
-+				va_bits);
-+	}
-+
-+	/* Check if va_bits is still not initialized. If still 0, call
-+	 * get_versiondep_info() to initialize the same from _stext
-+	 * symbol.
-+	 */
- 	if (!va_bits)
--		get_versiondep_info_arm64();
-+		if (get_va_bits_from_stext_arm64() == ERROR)
-+			return ERROR;
-+
-+	get_page_offset_arm64();
-+
-+	if (NUMBER(MAX_USER_VA_BITS) != NOT_FOUND_NUMBER) {
-+		max_user_va_bits = NUMBER(MAX_USER_VA_BITS);
-+		DEBUG_MSG("max_user_va_bits : %d (vmcoreinfo)\n",
-+				max_user_va_bits);
-+	}
-+
-+	/* Check if max_user_va_bits is still not initialized.
-+	 * If still 0, its not available in vmcoreinfo and its
-+	 * safe to initialize it with va_bits.
-+	 */
-+	if (!max_user_va_bits) {
-+		max_user_va_bits = va_bits;
-+		DEBUG_MSG("max_user_va_bits : %d (default = va_bits)\n",
-+				max_user_va_bits);
-+	}
- 
- 	if (!calculate_plat_config()) {
- 		ERRMSG("Can't determine platform config values\n");
-@@ -330,34 +404,11 @@ get_xen_info_arm64(void)
- int
- get_versiondep_info_arm64(void)
- {
--	ulong _stext;
--
--	_stext = get_stext_symbol();
--	if (!_stext) {
--		ERRMSG("Can't get the symbol of _stext.\n");
--		return FALSE;
--	}
--
--	/* Derive va_bits as per arch/arm64/Kconfig */
--	if ((_stext & PAGE_OFFSET_36) == PAGE_OFFSET_36) {
--		va_bits = 36;
--	} else if ((_stext & PAGE_OFFSET_39) == PAGE_OFFSET_39) {
--		va_bits = 39;
--	} else if ((_stext & PAGE_OFFSET_42) == PAGE_OFFSET_42) {
--		va_bits = 42;
--	} else if ((_stext & PAGE_OFFSET_47) == PAGE_OFFSET_47) {
--		va_bits = 47;
--	} else if ((_stext & PAGE_OFFSET_48) == PAGE_OFFSET_48) {
--		va_bits = 48;
--	} else {
--		ERRMSG("Cannot find a proper _stext for calculating VA_BITS\n");
--		return FALSE;
--	}
--
--	info->page_offset = (0xffffffffffffffffUL) << (va_bits - 1);
-+	if (!va_bits)
-+		if (get_va_bits_from_stext_arm64() == ERROR)
-+			return ERROR;
- 
--	DEBUG_MSG("va_bits      : %d\n", va_bits);
--	DEBUG_MSG("page_offset  : %lx\n", info->page_offset);
-+	get_page_offset_arm64();
- 
- 	return TRUE;
- }
-diff --git a/makedumpfile-1.6.7/makedumpfile.c b/makedumpfile-1.6.7/makedumpfile.c
-index d76a435..c8906b5 100644
---- a/makedumpfile-1.6.7/makedumpfile.c
-+++ b/makedumpfile-1.6.7/makedumpfile.c
-@@ -2313,6 +2313,7 @@ write_vmcoreinfo_data(void)
- 
- 	WRITE_NUMBER("HUGETLB_PAGE_DTOR", HUGETLB_PAGE_DTOR);
- #ifdef __aarch64__
-+	WRITE_NUMBER("MAX_USER_VA_BITS", MAX_USER_VA_BITS);
- 	WRITE_NUMBER("VA_BITS", VA_BITS);
- 	WRITE_NUMBER_UNSIGNED("PHYS_OFFSET", PHYS_OFFSET);
- 	WRITE_NUMBER_UNSIGNED("kimage_voffset", kimage_voffset);
-@@ -2719,6 +2720,7 @@ read_vmcoreinfo(void)
- 	READ_NUMBER("phys_base", phys_base);
- 	READ_NUMBER("KERNEL_IMAGE_SIZE", KERNEL_IMAGE_SIZE);
- #ifdef __aarch64__
-+	READ_NUMBER("MAX_USER_VA_BITS", MAX_USER_VA_BITS);
- 	READ_NUMBER("VA_BITS", VA_BITS);
- 	READ_NUMBER_UNSIGNED("PHYS_OFFSET", PHYS_OFFSET);
- 	READ_NUMBER_UNSIGNED("kimage_voffset", kimage_voffset);
-diff --git a/makedumpfile-1.6.7/makedumpfile.h b/makedumpfile-1.6.7/makedumpfile.h
-index 24b2f69..cccb52a 100644
---- a/makedumpfile-1.6.7/makedumpfile.h
-+++ b/makedumpfile-1.6.7/makedumpfile.h
-@@ -1937,6 +1937,7 @@ struct number_table {
- 	long	phys_base;
- 	long	KERNEL_IMAGE_SIZE;
- #ifdef __aarch64__
-+	long 	MAX_USER_VA_BITS;
- 	long 	VA_BITS;
- 	unsigned long	PHYS_OFFSET;
- 	unsigned long	kimage_voffset;
--- 
-2.7.5
-

SOURCES/supported-kdump-targets.txt

@@ -35,7 +35,8 @@ updating lists accordingly.
 Supported Dump targets
 ----------------------
 storage:
-        LVM volume (no thinp)
+        LVM volume
+        Thin provisioning volume
         FC disks (qla2xxx, lpfc, bnx2fc, bfa)
         software initiator based iSCSI
         software RAID (mdraid)
@@ -79,7 +80,6 @@ Unsupported Dump targets
 ------------------------
 storage:
         BIOS RAID
-        Thin provisioning volume
         Software iSCSI with iBFT (bnx2i, cxgb3i, cxgb4i)
         Software iSCSI with hybrid (be2iscsi)
         FCoE

SPECS/kexec-tools.spec

@@ -1,6 +1,6 @@
 Name: kexec-tools
-Version: 2.0.20
-Release: 34%{?dist}.1
+Version: 2.0.26
+Release: 14%{?dist}.2
 License: GPLv2
 Group: Applications/System
 Summary: The kexec/kdump userspace component
@@ -12,8 +12,8 @@ Source3: kdump.sysconfig.x86_64
 Source4: kdump.sysconfig.i386
 Source5: kdump.sysconfig.ppc64
 Source7: mkdumprd
-Source8: kdump.conf
-Source9: http://downloads.sourceforge.net/project/makedumpfile/makedumpfile/1.6.7/makedumpfile-1.6.7.tar.gz
+Source8: gen-kdump-conf.sh
+Source9: https://github.com/makedumpfile/makedumpfile/archive/1.7.2.tar.gz
 Source10: kexec-kdump-howto.txt
 Source12: mkdumprd.8
 Source13: 98-kexec.rules
@@ -34,6 +34,11 @@ Source28: supported-kdump-targets.txt
 Source29: kdump-udev-throttler
 Source30: kdump.sysconfig.aarch64
 Source31: fadump-howto.txt
+Source32: 60-kdump.install
+Source33: kdump-logger.sh
+Source34: kdump-migrate-action.sh
+Source35: kdump-restart.sh
+Source36: mkfadumprd
 
 #######################################
 # These are sources for mkdumpramfs
@@ -50,15 +55,23 @@ Source107: dracut-kdump-emergency.target
 Source108: dracut-early-kdump.sh
 Source109: dracut-early-kdump-module-setup.sh
 
+Source200: dracut-fadump-init-fadump.sh
+Source201: dracut-fadump-module-setup.sh
+
+%ifarch ppc64 ppc64le
+Requires(post): servicelog
+Recommends: keyutils
+%endif
+
 Requires(post): systemd-units
 Requires(preun): systemd-units
 Requires(postun): systemd-units
 Requires(pre): coreutils sed zlib 
-Requires: dracut >= 049-24
+Requires: dracut >= 049-129
 Requires: dracut-network >= 049
 Requires: dracut-squash >= 049
 Requires: ethtool
-BuildRequires: zlib-devel zlib zlib-static elfutils-devel glib2-devel bzip2-devel ncurses-devel bison flex lzo-devel snappy-devel
+BuildRequires: zlib-devel zlib zlib-static elfutils-devel glib2-devel bzip2-devel ncurses-devel bison flex lzo-devel snappy-devel libzstd-devel
 BuildRequires: pkgconfig intltool gettext 
 BuildRequires: systemd-units
 BuildRequires: automake autoconf libtool
@@ -85,6 +98,7 @@ ExcludeArch: i686
 #
 # Patches 401 through 500 are meant for s390 kexec-tools enablement
 #
+
 #
 # Patches 501 through 600 are meant for ARM kexec-tools enablement
 #
@@ -94,26 +108,10 @@ ExcludeArch: i686
 #
 Patch601: rhelonly-kexec-tools-2.0.16-koji-build-fail-workaround.patch
 Patch602: rhelonly-kexec-tools-2.0.18-eppic-fix-issues-with-hardening-flags.patch
-Patch603: rhonly-kexec-tools-2.0.18-makedumpfile-arm64-Add-support-for-ARMv8.2-LVA-52-bi.patch
-Patch604: kexec-tools-2.0.20-Cleanup-remove-the-read_elf_kcore.patch
-Patch605: kexec-tools-2.0.20-Fix-an-error-definition-about-the-variable-fname.patch
-Patch606: kexec-tools-2.0.20-Cleanup-move-it-back-from-util_lib-elf_info.c.patch
-Patch607: kexec-tools-2.0.20-Limit-the-size-of-vmcore-dmesg.txt-to-2G.patch
-Patch608: kexec-tools-2.0.20-vmcore-dmesg-vmcore-dmesg.c-Fix-shifting-error-repor.patch
-Patch609: kexec-tools-2.0.20-kexec-add-variant-helper-functions-for-handling-memo.patch
-Patch610: kexec-tools-2.0.20-arm64-kexec-allocate-memory-space-avoiding-reserved-.patch
-Patch611: kexec-tools-2.0.20-arm64-kdump-deal-with-a-lot-of-resource-entries-in-p.patch
 
 # Patches 701 onward for makedumpfile
-Patch701: kexec-tools-2.0.20-makedumpfile-PATCH-Remove-duplicated-variable-definitions.patch
-Patch702: kexec-tools-2.0.20-makedumpfile-PATCH-cope-with-not-present-mem-section.patch
-Patch703: kexec-tools-2.0.20-makedumpfile-PATCH-Introduce-check-params-option.patch
-Patch704: kexec-tools-2.0.20-makedumpfile-PATCH-Makefile-Fix-build-errors-in-static-build.patch
-Patch705: kexec-tools-2.0.20-makedumpfile-PATCH-Align-PMD_SECTION_MASK-with-PHYS_MASK.patch
-Patch706: kexec-tools-2.0.20-makedumpfile-PATCH-Fix-cd_header-offset-overflow-with-large-pfn.patch
-Patch707: kexec-tools-2.0.20-makedumpfile-PATCH-Avoid-false-positive-failure-in-mem_seciton-va.patch
-Patch708: kexec-tools-2.0.20-makedumpfile-PATCH-sadump-kaslr-fix-failure-of-calculating-kaslr.patch
-
+Patch701: rhelonly-kexec-tools-2.0.20-makedumpfile-arm64-Add-support-for-ARMv8.2-LVA-52-bi.patch
+Patch702: kexec-tools-2.0.26-makedumpfile-sadump-fix-failure-of-reading-memory-when-5-le.patch
 
 %description
 kexec-tools provides /usr/sbin/kexec binary that facilitates a new
@@ -131,23 +129,9 @@ tar -z -x -v -f %{SOURCE19}
 
 %patch601 -p1
 %patch602 -p1
-%patch603 -p1
-%patch604 -p1
-%patch605 -p1
-%patch606 -p1
-%patch607 -p1
-%patch608 -p1
-%patch609 -p1
-%patch610 -p1
-%patch611 -p1
+
 %patch701 -p1
 %patch702 -p1
-%patch703 -p1
-%patch704 -p1
-%patch705 -p1
-%patch706 -p1
-%patch707 -p1
-%patch708 -p1
 
 %ifarch ppc
 %define archdef ARCH=ppc
@@ -174,11 +158,14 @@ cp %{SOURCE27} .
 cp %{SOURCE28} .
 cp %{SOURCE31} .
 
+# Generate sysconfig file
+%{SOURCE8} %{_target_cpu} > kdump.conf
+
 make
 %ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64
 make -C eppic/libeppic
-make -C makedumpfile-1.6.7 LINKTYPE=dynamic USELZO=on USESNAPPY=on
-make -C makedumpfile-1.6.7 LDFLAGS="$LDFLAGS -I../eppic/libeppic -L../eppic/libeppic" eppic_makedumpfile.so
+make -C makedumpfile-1.7.2 LINKTYPE=dynamic USELZO=on USESNAPPY=on USEZSTD=on
+make -C makedumpfile-1.7.2 LDFLAGS="$LDFLAGS -I../eppic/libeppic -L../eppic/libeppic" eppic_makedumpfile.so
 %endif
 
 %install
@@ -197,6 +184,7 @@ mkdir -p $RPM_BUILD_ROOT%{_unitdir}
 mkdir -p -m755 $RPM_BUILD_ROOT%{_bindir}
 mkdir -p -m755 $RPM_BUILD_ROOT%{_libdir}
 mkdir -p -m755 $RPM_BUILD_ROOT%{_prefix}/lib/kdump
+mkdir -p -m755 $RPM_BUILD_ROOT%{_sharedstatedir}/kdump
 install -m 755 %{SOURCE1} $RPM_BUILD_ROOT%{_bindir}/kdumpctl
 
 install -m 755 build/sbin/kexec $RPM_BUILD_ROOT/usr/sbin/kexec
@@ -210,12 +198,14 @@ SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig.%{_target_cpu}
 install -m 644 $SYSCONFIG $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/kdump
 
 install -m 755 %{SOURCE7} $RPM_BUILD_ROOT/usr/sbin/mkdumprd
-install -m 644 %{SOURCE8} $RPM_BUILD_ROOT%{_sysconfdir}/kdump.conf
+install -m 755 %{SOURCE36} $RPM_BUILD_ROOT/usr/sbin/mkfadumprd
+install -m 644 kdump.conf $RPM_BUILD_ROOT%{_sysconfdir}/kdump.conf
 install -m 644 kexec/kexec.8 $RPM_BUILD_ROOT%{_mandir}/man8/kexec.8
 install -m 644 %{SOURCE12} $RPM_BUILD_ROOT%{_mandir}/man8/mkdumprd.8
 install -m 644 %{SOURCE25} $RPM_BUILD_ROOT%{_mandir}/man8/kdumpctl.8
 install -m 755 %{SOURCE20} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-lib.sh
 install -m 755 %{SOURCE23} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-lib-initramfs.sh
+install -m 755 %{SOURCE33} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-logger.sh
 %ifnarch s390x ppc64 ppc64le
 # For s390x the ELF header is created in the kdump kernel and therefore kexec
 # udev rules are not required
@@ -223,6 +213,8 @@ install -m 644 %{SOURCE13} $RPM_BUILD_ROOT%{_udevrulesdir}/98-kexec.rules
 %endif
 %ifarch ppc64 ppc64le
 install -m 644 %{SOURCE14} $RPM_BUILD_ROOT%{_udevrulesdir}/98-kexec.rules
+install -m 755 %{SOURCE34} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-migrate-action.sh
+install -m 755 %{SOURCE35} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-restart.sh
 %endif
 %ifnarch s390x
 install -m 755 %{SOURCE29} $RPM_BUILD_ROOT%{_udevrulesdir}/../kdump-udev-throttler
@@ -230,19 +222,22 @@ install -m 755 %{SOURCE29} $RPM_BUILD_ROOT%{_udevrulesdir}/../kdump-udev-throttl
 install -m 644 %{SOURCE15} $RPM_BUILD_ROOT%{_mandir}/man5/kdump.conf.5
 install -m 644 %{SOURCE16} $RPM_BUILD_ROOT%{_unitdir}/kdump.service
 install -m 755 -D %{SOURCE22} $RPM_BUILD_ROOT%{_prefix}/lib/systemd/system-generators/kdump-dep-generator.sh
+install -m 755 -D %{SOURCE32} $RPM_BUILD_ROOT%{_prefix}/lib/kernel/install.d/60-kdump.install
+
 
 %ifarch %{ix86} x86_64 ppc64 s390x ppc64le aarch64
-install -m 755 makedumpfile-1.6.7/makedumpfile $RPM_BUILD_ROOT/usr/sbin/makedumpfile
-install -m 644 makedumpfile-1.6.7/makedumpfile.8.gz $RPM_BUILD_ROOT/%{_mandir}/man8/makedumpfile.8.gz
-install -m 644 makedumpfile-1.6.7/makedumpfile.conf.5.gz $RPM_BUILD_ROOT/%{_mandir}/man5/makedumpfile.conf.5.gz
-install -m 644 makedumpfile-1.6.7/makedumpfile.conf $RPM_BUILD_ROOT/%{_sysconfdir}/makedumpfile.conf.sample
-install -m 755 makedumpfile-1.6.7/eppic_makedumpfile.so $RPM_BUILD_ROOT/%{_libdir}/eppic_makedumpfile.so
+install -m 755 makedumpfile-1.7.2/makedumpfile $RPM_BUILD_ROOT/usr/sbin/makedumpfile
+install -m 644 makedumpfile-1.7.2/makedumpfile.8 $RPM_BUILD_ROOT/%{_mandir}/man8/makedumpfile.8
+install -m 644 makedumpfile-1.7.2/makedumpfile.conf.5 $RPM_BUILD_ROOT/%{_mandir}/man5/makedumpfile.conf.5
+install -m 644 makedumpfile-1.7.2/makedumpfile.conf $RPM_BUILD_ROOT/%{_sysconfdir}/makedumpfile.conf.sample
+install -m 755 makedumpfile-1.7.2/eppic_makedumpfile.so $RPM_BUILD_ROOT/%{_libdir}/eppic_makedumpfile.so
 mkdir -p $RPM_BUILD_ROOT/usr/share/makedumpfile/eppic_scripts/
-install -m 644 makedumpfile-1.6.7/eppic_scripts/* $RPM_BUILD_ROOT/usr/share/makedumpfile/eppic_scripts/
+install -m 644 makedumpfile-1.7.2/eppic_scripts/* $RPM_BUILD_ROOT/usr/share/makedumpfile/eppic_scripts/
 %endif
 
 %define remove_dracut_prefix() %(echo -n %1|sed 's/.*dracut-//g')
 %define remove_dracut_early_kdump_prefix() %(echo -n %1|sed 's/.*dracut-early-kdump-//g')
+%define remove_dracut_fadump_prefix() %(echo -n %1|sed 's/.*dracut-fadump-//g')
 
 # deal with dracut modules
 mkdir -p -m755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase
@@ -261,6 +256,13 @@ cp %{SOURCE108} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlyk
 cp %{SOURCE109} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_early_kdump_prefix %{SOURCE109}}
 chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_prefix %{SOURCE108}}
 chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99earlykdump/%{remove_dracut_early_kdump_prefix %{SOURCE109}}
+%ifarch ppc64 ppc64le
+mkdir -p -m755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99zz-fadumpinit
+cp %{SOURCE200} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99zz-fadumpinit/%{remove_dracut_fadump_prefix %{SOURCE200}}
+cp %{SOURCE201} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99zz-fadumpinit/%{remove_dracut_fadump_prefix %{SOURCE201}}
+chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99zz-fadumpinit/%{remove_dracut_fadump_prefix %{SOURCE200}}
+chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99zz-fadumpinit/%{remove_dracut_fadump_prefix %{SOURCE201}}
+%endif
 
 
 %define dracutlibdir %{_prefix}/lib/dracut
@@ -273,6 +275,13 @@ mv $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/* $RPM_BUILD_ROOT/%{d
 %systemd_post kdump.service
 
 touch /etc/kdump.conf
+
+%ifarch ppc64 ppc64le
+servicelog_notify --remove --command=/usr/lib/kdump/kdump-migrate-action.sh 2>/dev/null
+servicelog_notify --add --command=/usr/lib/kdump/kdump-migrate-action.sh --match='refcode="#MIGRATE" and serviceable=0' --type=EVENT --method=pairs_stdin
+%endif
+
+
 # This portion of the script is temporary.  Its only here
 # to fix up broken boxes that require special settings 
 # in /etc/sysconfig/kdump.  It will be removed when 
@@ -300,6 +309,9 @@ fi
 %systemd_postun_with_restart kdump.service
 
 %preun
+%ifarch ppc64 ppc64le
+servicelog_notify --remove --command=/usr/lib/kdump/kdump-migrate-action.sh
+%endif
 # Package removal, not upgrade
 %systemd_preun kdump.service
 
@@ -340,6 +352,7 @@ done
 /usr/sbin/kexec
 /usr/sbin/makedumpfile
 /usr/sbin/mkdumprd
+/usr/sbin/mkfadumprd
 /usr/sbin/vmcore-dmesg
 %{_bindir}/*
 %{_datadir}/kdump
@@ -358,6 +371,7 @@ done
 %dir %{_sysconfdir}/kdump
 %dir %{_sysconfdir}/kdump/pre.d
 %dir %{_sysconfdir}/kdump/post.d
+%dir %{_sharedstatedir}/kdump
 %{_mandir}/man8/kdumpctl.8.gz
 %{_mandir}/man8/kexec.8.gz
 %{_mandir}/man8/makedumpfile.8.gz
@@ -366,6 +380,7 @@ done
 %{_mandir}/man5/*
 %{_unitdir}/kdump.service
 %{_prefix}/lib/systemd/system-generators/kdump-dep-generator.sh
+%{_prefix}/lib/kernel/install.d/60-kdump.install
 %doc News
 %license COPYING
 %doc TODO
@@ -381,8 +396,304 @@ done
 %endif
 
 %changelog
-* Wed Oct 28 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-34.1
+* Tue Jul 30 2024 Pingfan Liu <piliu@redhat.com> - 2.0.26-14.2
+- Use the correct regex to match eth.*
+
+* Tue Jun 18 2024 Pingfan Liu <piliu@redhat.com> - 2.0.26-14.1
+- mkdumprd: Fix makedumpfile parameter check
+
+* Wed Feb 21 2024 Pingfan Liu <piliu@redhat.com> - 2.0.26-14
+- dracut-module-setup: Skip initrd-cleanup and initrd-parse-etc in kdump
+
+* Fri Feb  2 2024 Pingfan Liu <piliu@redhat.com> - 2.0.26-13
+- dracut-module-setup.sh: also install the driver of physical NIC for Hyper-V VM with accelerated networking
+
+* Wed Nov 22 2023 Pingfan Liu <piliu@redhat.com> - 2.0.26-12
+- kdumpctl: Only returns immediately after an error occurs in check_*_modified
+
+* Thu Nov  9 2023 Pingfan Liu <piliu@redhat.com> - 2.0.26-11
+- powerpc: update kdumpctl to load kernel signing key for fadump
+- powerpc: update kdumpctl to remove deletion of kernel signing key once loaded
+
+* Tue Sep 26 2023 Pingfan Liu <piliu@redhat.com> - 2.0.26-10
+- Introduce a function to get reserved memory size
+
+* Tue Sep 19 2023 Pingfan Liu <piliu@redhat.com> - 2.0.26-9
+- Add lvm thin provision to kdump supported-kdump-targets.txt
+
+* Thu Aug 10 2023 Pingfan Liu <piliu@redhat.com> - 2.0.26-8
+- mkdumprd: Use the correct syntax to redirect the stderr to null
+- mkdumprd: call dracut with --add-device to install the drivers needed by /boot partition automatically for FIPS
+- Add NICs that handle DNS queries to the allowlist
+
+* Wed Jul 12 2023 Pingfan Liu <piliu@redhat.com> - 2.0.26-7
+- Revert "Revert "Append both nofail and x-systemd.before to kdump mount target"
+
+* Thu Jun 29 2023 Pingfan Liu <piliu@redhat.com> - 2.0.26-6
+- dracut-module-setup.sh: skip installing driver for the loopback interface
+- Reduce kdump memory consumption by only installing needed NIC drivers
+
+* Tue Jun 13 2023 Pingfan Liu <piliu@redhat.com> - 2.0.26-5
+- Revert "Append both nofail and x-systemd.before to kdump mount target"
+
+* Wed May 31 2023 Pingfan Liu <piliu@redhat.com> - 2.0.26-4
+- Only rename the virtual Azure Hyper-V network interface
+
+* Tue May 16 2023 Pingfan Liu <piliu@redhat.com> - 2.0.26-3
+- Don't rename Azure Hyper-V network interface
+
+* Thu Apr 20 2023 Pingfan Liu <piliu@redhat.com> - 2.0.26-2
+- sadump: fix failure of reading memory when 5-level paging is enabled
+
+* Tue Apr  4 2023 Pingfan Liu <piliu@redhat.com> - 2.0.25-7
+- Rebase makedumpfile to 1.7.2
+
+* Tue Mar 14 2023 Pingfan Liu <piliu@redhat.com> - 2.0.25-6
+- sysconfig: add zfcp.allow_lun_scan to KDUMP_COMMANDLINE_REMOVE on s390
+
+* Wed Jan 18 2023 Pingfan Liu <piliu@redhat.com> - 2.0.25-5
+- dracut-module-setup: Fix invalid rd.znet command line entry
+- dracut-module-setup: Fix persistent nic name on s390
+
+* Mon Jan  9 2023 Pingfan Liu <piliu@redhat.com> - 2.0.25-4
+- Don't check fs modified when dump target is lvm2 thinp
+- Add dependency of dracut lvmthinpool-monitor module
+- lvm.conf should be check modified if lvm2 thinp enabled
+- Add lvm2 thin provision dump target checker
+- Fix the sync issue for dump_fs
+
+* Fri Dec  2 2022 Pingfan Liu <piliu@redhat.com> - 2.0.25-3
+- kdump.conf: use a simple generator script to maintain
+- Reduce kdump memory consumption by not letting NetworkManager manage unneeded network interfaces
+
+* Mon Oct 17 2022 Pingfan Liu <piliu@redhat.com> - 2.0.25-2
+- mkdumprd: Improve error messages on non-existing NFS target directories
+- fadump: avoid non-debug kernel use for fadump case
+
+* Sun Sep 18 2022 Pingfan Liu <piliu@redhat.com> - 2.0.24-7
+- kdumpctl: make the kdump.log root-readable-only
+
+* Mon Jul 18 2022 Pingfan Liu <piliu@redhat.com> - 2.0.24-6
+- kdump-lib: Add the CoreOS kernel dir to the boot_dirlist
+- kdump-lib: attempt to fix BOOT_IMAGE detection
+- kdump-lib: change how ostree based systems are detected
+- kdump-lib: clear up references to Atomic/CoreOS
+
+* Mon Jul 4 2022 Pingfan Liu <piliu@redhat.com> - 2.0.24-5
+- kdump-lib: use non-debug kernels first
+
+* Tue Jun 21 2022 Pingfan Liu <piliu@redhat.com> - 2.0.24-4
+- kdump-lib.sh: Check the output of blkid with sed instead of eval
+
+* Fri Jun 10 2022 Pingfan Liu <piliu@redhat.com> - 2.0.24-3
+- kdump.sysconfig*: add ignition.firstboot to KDUMP_COMMANDLINE_REMOVE
+
+* Fri May 27 2022 Pingfan Liu <piliu@redhat.com> - 2.0.24-2
+- kdumpctl: fix missed dollar sign
+
+* Thu May  5 2022 Pingfan Liu <piliu@redhat.com> - 2.0.24-1
+- kdumpctl: sync the $TARGET_INITRD after rebuild
+- Avoid false-positive mem_section validation with vmlinux
+- Rebase kexec-tools to 2.0.24
+- Rebase makedumpfile to 1.7.1
+
+* Fri Apr 15 2022 Pingfan Liu <piliu@redhat.com> - 2.0.20-69
+- s390: add support for --reuse-cmdline
+- use slurp_proc_file() in get_command_line()
+- add slurp_proc_file()
+- s390: use KEXEC_ALL_OPTIONS
+- s390: add variable command line size
+- util_lib/elf_info: harden parsing of printk buffer
+- print error when reading with unsupported compression
+- use cycle detection when parsing the prink log_buf
+- use pointer arithmetics for dump_dmesg
+- add generic cycle detection
+
+* Thu Jan 27 2022 Pingfan Liu <piliu@redhat.com> - 2.0.20-68
+- Revert "Remove trace_buf_size and trace_event from the kernel bootparameters of the kdump kernel"
+
+* Fri Dec 24 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-67
+- Remove trace_buf_size and trace_event from the kernel bootparameters of the kdump kernel
+
+* Fri Dec 10 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-66
+- kdump/ppc64: suppress the error message "Could not find a registered notification tool" from servicelog_notify
+- Enable zstd compression for makedumpfile in kexec-tools.spec
+
+* Thu Dec  2 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-65
+- mkdumprd: drop mountaddr/mountproto nfs mount options 
+
+* Fri Nov 26 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-64
+- add keytuils as a weak dependency for POWER
+
+* Fri Nov 19 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-63
+- Document/kexec-kdump-howto.txt: fix escape
+
+* Wed Nov 17 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-62
+- Document/kexec-kdump-howto.txt: improve notes for kdump_pre  and kdump_post scripts
+
+* Tue Nov  9 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-61
+- rebase makedumpfile to 1.7.0
+
+* Fri Oct 22 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-60
+- fadump-init: clean up mount points properly
+- fadump: kdumpctl should check the modules used by the fadump initramfs
+- fadump: isolate fadump initramfs image within the default one
+- mkdumprd: Use xz for squash image compression
+
+* Mon Oct 18 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-59
+- makedumpfile: printk: use committed/finalized state values
+- makedumpfile: printk: add support for lockless ringbuffer
+- kexec-tools: printk: Use %zu to format size_t
+- kexec-tools: printk: Use ULL suffix for 64-bit constants
+- kexec-tools: printk: add support for lockless ringbuffer
+
+* Sun Oct 17 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-58
+- kdumpctl: fix fragile loops over find output
+
+* Fri Aug 27 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-57
+- kdumpctl: enable secure boot on ppc64le LPARs
+
+* Fri Aug  6 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-56
+- kdumpctl: fix a typo
+
+* Mon Aug  2 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-55
+- kdump/ppc64: migration action registration clean up
+
+* Fri Jul 23 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-54
+- kdump/ppc64: rebuild initramfs image after migration
+- Check the existence of /sys/bus/ccwgroup/devices/*/online beforehand
+- kdump.sysconfig.s390: Remove "prot_virt" from kdump kernel cmdline
+
+* Fri Jul  2 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-53
+- check for invalid physical address of /proc/kcore when making ELF dumpfile
+- check for invalid physical address of /proc/kcore when finding max_paddr
+- fix format issue in find_online_znet_device
+- check the existence of /sys/bus/ccwgroup/devices before trying to find online network device
+- kdump-lib.sh: fix a warning in prepare_kdump_bootinfo()
+
+* Thu Jun 17 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-52
+- Write to `/var/lib/kdump` if $KDUMP_BOOTDIR not writable
+- Iterate /sys/bus/ccwgroup/devices to tell if we should set up rd.znet
+- mkdumprd: display the absolute path of dump location in the check_user_configured_target()
+
+* Wed Jun  2 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-51
+- Stop reloading kdump service on CPU hotplug event for FADump
+- fadump: improve fadump-howto.txt about remote dump target setup
+
+* Tue May 25 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-50
+- rd.route should use the name from kdump_setup_ifname
+- get kdump ifname once in kdump_install_netdev
+
+* Tue May 25 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-49
+- kdump-lib.sh: fix the case if no enough total RAM for kdump  in get_recommend_size()
+
+* Thu May 20 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-48
+- kdumpctl: Add kdumpctl estimate
+- mkdumprd: make use of the new get_luks_crypt_dev helper
+- kdump-lib.sh: introduce a helper to get all crypt dev used by kdump
+- kdump-lib.sh: introduce a helper to get underlying crypt device
+- RHEL-only: keep total memory size coherent to RHEL-only kernel patch
+- Show write byte size in report messages
+- Add shorthand --show-stats option to show report stats
+- Add --dry-run option to prevent writing the dumpfile
+- kdump-lib.sh: introduce functions to return recommened mem size
+
+* Mon May 10 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-47
+- Implement IP netmask calculation to replace "ipcalc -m"
+- kdumpctl: fix check_config error when kdump.conf is empty
+- Fix incorrect vmcore permissions when dumped through ssh
+- Fix incorrect permissions on kdump dmesg file
+
+* Mon Jan 25 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-45
+- origin/rhel-8.4.0) Revert "Revert "Append both nofail and x-systemd.before to kdump mount target""
+- kdump.conf: add ipv6 example for nfs and ssh dump
+- fix kdump failure of saving vmcore with the scp + ipv6 method
+
+* Fri Jan 22 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-44
+- module-setup.sh: don't polute the namespace unnecessarily
+- module-setup.sh: don't source $dracutfunctions
+- logger: source the logger file individually
+- dracut-module-setup.sh: enable ForwardToConsole=yes in fadump mode
+
+* Fri Jan 15 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-43
+- Always include watchdog-modules
+- mkdumprd: Ensure kdumpbase is added
+- Move watchdog detect and install code to module-setup.sh
+- Add a helper to omit non-mandatory dracut module
+- Move some dracut module dependencies checks to module-setup.sh
+- Set watchdog's pretimeout to zero in kdump kernel
+- kdump-lib.sh: Use a more generic helper to detect omitted dracut module
+- Fix the watchdog drivers detection code
+- Add a helper for detecting watchdog drivers
+- Remove a redundant nfs check
+- kdumpctl: split the driver detection from fs dection function
+- kdump.service: use ConditionKernelCommandLine=crashkernel
+- Revert "Append both nofail and x-systemd.before to kdump mount target"
+- Revert "Don's try to restart dracut-initqueue if it's already failed"
+- Fix dump_fs mount point detection and fallback mount
+- kdump.conf: Update doc about core_collector for ssh target
+- Save the final failure information to log file if saving vmcore failed
+- Doc: Improve the kdump sysconfig document
+- kdumpctl: fix a variable expansion in check_fence_kdump_config()
+- Fedora 33 rhpkg build bug
+
+* Tue Dec 22 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-42
+- makedumpfile: add support for ARMv8.2 LVA 52 bits
+
+* Fri Dec 18 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-41
+- Doc: improve mkdumprd man page
+
+* Tue Dec 15 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-40
+- Rework on dracut-module-setup.sh: Use systemctl call to replace ln_r
+
+* Tue Dec 15 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-39
+- dracut-module-setup.sh: Use systemctl call to replace ln_r
+
+* Fri Dec 11 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-38
+- Don's try to restart dracut-initqueue if it's already failed
+- fadump-howto: update about 'nocma' and 'off' options for 'fadump=' parameter
+- dracut-module-setup.sh: use auto6 for ipv6
+- module-setup.sh: enable vlan on team interface
+- Fix rootfs detection in dump_fs
+- Remove RHEL-only patch: kexec-tools-2.0.18-makedumpfile-arm64-Add-support-for-ARMv8.2-LVA-52-bi.patch
+- Rebase to makedumpfile-1.6.8 (step1)
+
+* Fri Nov 13 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-37
+- Doc: improve the usage documentation of the logger
+- Update the kdump sysconfig
+- Capitalize the configuration name of log level
+- Add the rd.kdumploglvl option to control log level in the second kernel
+- Appropriately converts logger numeric level to syslog log level
+- Remove unused log levels for kdump logger
+- Add sanity checks for the log levels
+- Add code comments to help better understanding
+- Doc: add a documentation for the usage of logger
+- Improve debugging in the kdump kernel
+- kdumpctl: add the '-d' option to enable the kexec loading debugging messages
+- kdump.sysconfig: add the kdump logger configurations
+- enable the logger for kdump
+- introduce the kdump logger from the dracut
+
+* Fri Nov  6 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-36
+- arm64: Enable 'kexec_file_load' by default
+- Fix, Add a kernel install hook to clean up kdump initramfs
+
+* Fri Oct 30 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-35
+- module-setup.sh: Instead of drop journalctl log, just don't read kmsg
+- s390x: enable the kexec file load by default
+- increase makdumpfile default message level to 7
+- Rework check_config and warn on any duplicated option
+- kdumpctl: Error out if path is set more than once.
+- Don't drop journalctl content if failure action is "shell"
+- dracut-module-install: Move systemd conf install code to a function
+- kdump-lib.sh: Remove is_atomic
+- Refactor kernel image and initrd detection code
+- early-kdump: Use consistent symbol link for kernel and initramfs
+- kdump-lib: strip grub device from kdump_bootdir
+- kdumpctl: fix driver change detection on latest Fedora
+- Revert "kdump-lib: disable efifb if hyperv_fb is in use"
 - kdump-lib.sh: detect secure boot on s390
+- Add a kernel install hook to clean up kdump initramfs
 
 * Wed Aug 19 2020 Pingfan Liu <piliu@redhat.com> - 2.0.20-34
 - kdump-lib: disable efifb if hyperv_fb is in use