import kexec-tools-2.0.20-57.el8

This commit is contained in:
CentOS Sources 2021-11-09 04:53:52 -05:00 committed by Stepan Oksanichenko
parent 0d79822752
commit 2793b39ac3
18 changed files with 923 additions and 66 deletions

View File

@ -1,15 +1,22 @@
SUBSYSTEM=="cpu", ACTION=="online", GOTO="kdump_reload"
SUBSYSTEM=="memory", ACTION=="online", GOTO="kdump_reload"
SUBSYSTEM=="memory", ACTION=="offline", GOTO="kdump_reload"
SUBSYSTEM=="cpu", ACTION=="online", GOTO="kdump_reload_cpu"
SUBSYSTEM=="memory", ACTION=="online", GOTO="kdump_reload_mem"
SUBSYSTEM=="memory", ACTION=="offline", GOTO="kdump_reload_mem"
GOTO="kdump_reload_end"
LABEL="kdump_reload"
# If kdump is not loaded, calling kdump-udev-throttle will end up
# doing nothing, but systemd-run will always generate extra logs for
# each call, so trigger the kdump-udev-throttler only if kdump
# service is active to avoid unnecessary logs
LABEL="kdump_reload_mem"
RUN+="/bin/sh -c '/usr/bin/systemctl is-active kdump.service || exit 0; /usr/bin/systemd-run --quiet --no-block /usr/lib/udev/kdump-udev-throttler'"
GOTO="kdump_reload_end"
LABEL="kdump_reload_cpu"
RUN+="/bin/sh -c '/usr/bin/systemctl is-active kdump.service || exit 0; ! test -f /sys/kernel/fadump_enabled || cat /sys/kernel/fadump_enabled | grep 0 || exit 0; /usr/bin/systemd-run --quiet --no-block /usr/lib/udev/kdump-udev-throttler'"
LABEL="kdump_reload_end"

View File

@ -136,7 +136,7 @@ dump_ssh()
fi
_exitcode=$?
else
$CORE_COLLECTOR /proc/vmcore | ssh $_opt $_host "dd bs=512 of=$_dir/vmcore-incomplete"
$CORE_COLLECTOR /proc/vmcore | ssh $_opt $_host "umask 0077 && dd bs=512 of=$_dir/vmcore-incomplete"
_exitcode=$?
_vmcore="vmcore.flat"
fi
@ -218,7 +218,7 @@ save_vmcore_dmesg_ssh() {
local _location=$4
dinfo "saving vmcore-dmesg.txt to $_location:$_path"
$_dmesg_collector /proc/vmcore | ssh $_opts $_location "dd of=$_path/vmcore-dmesg-incomplete.txt"
$_dmesg_collector /proc/vmcore | ssh $_opts $_location "umask 0077 && dd of=$_path/vmcore-dmesg-incomplete.txt"
_exitcode=$?
if [ $_exitcode -eq 0 ]; then

View File

@ -233,7 +233,7 @@ cal_netmask_by_prefix() {
#$2: srcaddr
#if it use static ip echo it, or echo null
kdump_static_ip() {
local _netdev="$1" _srcaddr="$2" _ipv6_flag
local _netdev="$1" _srcaddr="$2" kdumpnic="$3" _ipv6_flag
local _netmask _gateway _ipaddr _target _nexthop _prefix
_ipaddr=$(ip addr show dev $_netdev permanent | awk "/ $_srcaddr\/.* /{print \$2}")
@ -270,7 +270,7 @@ kdump_static_ip() {
_target="[$_target]"
_nexthop="[$_nexthop]"
fi
echo "rd.route=$_target:$_nexthop:$_netdev"
echo "rd.route=$_target:$_nexthop:$kdumpnic"
done >> ${initdir}/etc/cmdline.d/45route-static.conf
}
@ -391,6 +391,37 @@ kdump_setup_vlan() {
fi
}
# find online znet device
# return ifname (_netdev)
# code reaped from the list_configured function of
# https://github.com/hreinecke/s390-tools/blob/master/zconf/znetconf
find_online_znet_device() {
local CCWGROUPBUS_DEVICEDIR="/sys/bus/ccwgroup/devices"
local NETWORK_DEVICES d ifname ONLINE
[ ! -d "$CCWGROUPBUS_DEVICEDIR" ] && return
NETWORK_DEVICES=$(find $CCWGROUPBUS_DEVICEDIR)
for d in $NETWORK_DEVICES
do
[ ! -f "$d/online" ] && continue
read ONLINE < $d/online
if [ $ONLINE -ne 1 ]; then
continue
fi
# determine interface name, if there (only for qeth and if
# device is online)
if [ -f $d/if_name ]
then
read ifname < $d/if_name
elif [ -d $d/net ]
then
ifname=$(ls $d/net/)
fi
[ -n "$ifname" ] && break
done
echo -n "$ifname"
}
# setup s390 znet cmdline
# $1: netdev name
kdump_setup_znet() {
@ -408,14 +439,22 @@ kdump_setup_znet() {
# Setup dracut to bringup a given network interface
kdump_setup_netdev() {
local _netdev=$1 _srcaddr=$2
local _static _proto _ip_conf _ip_opts _ifname_opts
local _static _proto _ip_conf _ip_opts _ifname_opts kdumpnic
local _netmac=$(kdump_get_mac_addr $_netdev)
local _znet_netdev
if [ "$(uname -m)" = "s390x" ]; then
kdump_setup_znet $_netdev
kdumpnic=$(kdump_setup_ifname $_netdev)
_znet_netdev=$(find_online_znet_device)
if [[ -n "$_znet_netdev" ]]; then
$(kdump_setup_znet "$_znet_netdev")
if [[ $? != 0 ]]; then
derror "Failed to set up znet"
exit 1
fi
fi
_static=$(kdump_static_ip $_netdev $_srcaddr)
_static=$(kdump_static_ip $_netdev $_srcaddr $kdumpnic)
if [ -n "$_static" ]; then
_proto=none
elif is_ipv6_address $_srcaddr; then
@ -425,7 +464,7 @@ kdump_setup_netdev() {
fi
_ip_conf="${initdir}/etc/cmdline.d/40ip.conf"
_ip_opts=" ip=${_static}$(kdump_setup_ifname $_netdev):${_proto}"
_ip_opts=" ip=${_static}$kdumpnic:${_proto}"
# dracut doesn't allow duplicated configuration for same NIC, even they're exactly the same.
# so we have to avoid adding duplicates
@ -445,7 +484,7 @@ kdump_setup_netdev() {
elif kdump_is_vlan "$_netdev"; then
kdump_setup_vlan "$_netdev"
else
_ifname_opts=" ifname=$(kdump_setup_ifname $_netdev):$_netmac"
_ifname_opts=" ifname=$kdumpnic:$_netmac"
echo "$_ifname_opts" >> $_ip_conf
fi
@ -944,6 +983,7 @@ install() {
inst "/sbin/vmcore-dmesg" "/sbin/vmcore-dmesg"
inst "/usr/bin/printf" "/sbin/printf"
inst "/usr/bin/logger" "/sbin/logger"
inst "/usr/bin/chmod" "/sbin/chmod"
inst "/lib/kdump/kdump-lib.sh" "/lib/kdump-lib.sh"
inst "/lib/kdump/kdump-lib-initramfs.sh" "/lib/kdump-lib-initramfs.sh"
inst "/lib/kdump/kdump-logger.sh" "/lib/kdump-logger.sh"

View File

@ -224,12 +224,16 @@ Things to remember:
dracut_args --add "network"
4) If FADump is configured to capture vmcore to a remote dump target using SSH
or NFS protocol, the network interface is renamed to kdump-<interface-name>
if <interface-name> is generic, for example, *eth#, or net#. This problem
occurs because the vmcore capture scripts in the initial RAM disk (initrd)
add the kdump- prefix to the network interface name to secure persistent
naming. As the same initrd is used for production kernel boot, the interface
name is changed for the production kernel too.
or NFS protocol, the corresponding network interface '<interface-name>' is
renamed to 'kdump-<interface-name>', if it is generic (like *eth# or net#).
It happens because vmcore capture scripts in the initial RAM disk (initrd)
add the 'kdump-' prefix to the network interface name to secure persistent
naming. And as capture kernel and production kernel use the same initrd in
case of FADump, the interface name is changed for the production kernel too.
This is likely to impact network configuration setup for production kernel.
So, it is recommended to use a non-generic name for a network interface,
before setting up FADump to capture vmcore to a remote dump target based on
that network interface, to avoid running into network configuration issues.
Dump Triggering methods:

View File

@ -111,6 +111,7 @@ save_log()
if command -v journalctl > /dev/null; then
journalctl -ab >> $KDUMP_LOG_FILE
fi
chmod 600 $KDUMP_LOG_FILE
}
# dump_fs <mount point>
@ -171,6 +172,7 @@ save_vmcore_dmesg_fs() {
_exitcode=$?
if [ $_exitcode -eq 0 ]; then
mv ${_path}/vmcore-dmesg-incomplete.txt ${_path}/vmcore-dmesg.txt
chmod 600 ${_path}/vmcore-dmesg.txt
# Make sure file is on disk. There have been instances where later
# saving vmcore failed and system rebooted without sync and there

View File

@ -694,7 +694,7 @@ prepare_kdump_bootinfo()
local boot_imglist boot_dirlist boot_initrdlist curr_kver="$(uname -r)"
local machine_id
if [ -z "$KDUMP_KERNELVER"]; then
if [ -z "$KDUMP_KERNELVER" ]; then
KDUMP_KERNELVER="$(uname -r)"
fi
@ -834,3 +834,192 @@ prepare_cmdline()
echo ${cmdline}
}
#get system memory size in the unit of GB
get_system_size()
{
result=$(cat /proc/iomem | grep "System RAM" | awk -F ":" '{ print $1 }' | tr [:lower:] [:upper:] | paste -sd+)
result="+$result"
# replace '-' with '+0x' and '+' with '-0x'
sum=$( echo $result | sed -e 's/-/K0x/g' | sed -e 's/+/-0x/g' | sed -e 's/K/+/g' )
size=$(printf "%d\n" $(($sum)))
# in MB unit
let size=$size/1024/1024
# since RHEL-8.5 kernel round up total memory to 128M, so should user space
let size=($size+127)/128
let size=$size*128
# in GB unit
let size=$size/1024
echo $size
}
get_recommend_size()
{
local mem_size=$1
local _ck_cmdline=$2
local OLDIFS="$IFS"
last_sz=""
last_unit=""
start=${_ck_cmdline: :1}
if [ $mem_size -lt $start ]; then
echo "0M"
return
fi
IFS=','
for i in $_ck_cmdline; do
end=$(echo $i | awk -F "-" '{ print $2 }' | awk -F ":" '{ print $1 }')
recommend=$(echo $i | awk -F "-" '{ print $2 }' | awk -F ":" '{ print $2 }')
size=${end: : -1}
unit=${end: -1}
if [ $unit == 'T' ]; then
let size=$size*1024
fi
if [ $mem_size -lt $size ]; then
echo $recommend
IFS="$OLDIFS"
return
fi
done
IFS="$OLDIFS"
}
# return recommended size based on current system RAM size
kdump_get_arch_recommend_size()
{
if ! [[ -r "/proc/iomem" ]] ; then
echo "Error, can not access /proc/iomem."
return 1
fi
arch=$(lscpu | grep Architecture | awk -F ":" '{ print $2 }' | tr [:lower:] [:upper:])
if [ $arch == "X86_64" ] || [ $arch == "S390X" ]; then
ck_cmdline="1G-4G:160M,4G-64G:192M,64G-1T:256M,1T-:512M"
elif [ $arch == "AARCH64" ]; then
ck_cmdline="2G-:448M"
elif [ $arch == "PPC64LE" ]; then
if is_fadump_capable; then
ck_cmdline="4G-16G:768M,16G-64G:1G,64G-128G:2G,128G-1T:4G,1T-2T:6G,2T-4T:12G,4T-8T:20G,8T-16T:36G,16T-32T:64G,32T-64T:128G,64T-:180G"
else
ck_cmdline="2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G"
fi
fi
ck_cmdline=$(echo $ck_cmdline | sed -e 's/-:/-102400T:/g')
sys_mem=$(get_system_size)
result=$(get_recommend_size $sys_mem "$ck_cmdline")
echo $result
return 0
}
# Print all underlying crypt devices of a block device
# print nothing if device is not on top of a crypt device
# $1: the block device to be checked in maj:min format
get_luks_crypt_dev()
{
[[ -b /dev/block/$1 ]] || return 1
local _type=$(eval "$(blkid -u filesystem,crypto -o export -- /dev/block/$1); echo \$TYPE")
[[ $_type == "crypto_LUKS" ]] && echo $1
for _x in /sys/dev/block/$1/slaves/*; do
[[ -f $_x/dev ]] || continue
[[ $_x/subsystem -ef /sys/class/block ]] || continue
get_luks_crypt_dev "$(< "$_x/dev")"
done
}
# kdump_get_maj_min <device>
# Prints the major and minor of a device node.
# Example:
# $ get_maj_min /dev/sda2
# 8:2
kdump_get_maj_min() {
local _majmin
_majmin="$(stat -L -c '%t:%T' "$1" 2> /dev/null)"
printf "%s" "$((0x${_majmin%:*})):$((0x${_majmin#*:}))"
}
get_all_kdump_crypt_dev()
{
local _dev _crypt
for _dev in $(get_block_dump_target); do
_crypt=$(get_luks_crypt_dev $(kdump_get_maj_min "$_dev"))
[[ -n "$_crypt" ]] && echo $_crypt
done
}
check_vmlinux()
{
# Use readelf to check if it's a valid ELF
readelf -h $1 &>/dev/null || return 1
}
get_vmlinux_size()
{
local size=0
while read _type _offset _virtaddr _physaddr _fsize _msize _flg _aln; do
size=$(( $size + $_msize ))
done <<< $(readelf -l -W $1 | grep "^ LOAD" 2>/dev/stderr)
echo $size
}
try_decompress()
{
# The obscure use of the "tr" filter is to work around older versions of
# "grep" that report the byte offset of the line instead of the pattern.
# Try to find the header ($1) and decompress from here
for pos in `tr "$1\n$2" "\n$2=" < "$4" | grep -abo "^$2"`
do
if ! type -P $3 > /dev/null; then
ddebug "Signiature detected but '$3' is missing, skip this decompressor"
break
fi
pos=${pos%%:*}
tail -c+$pos "$img" | $3 > $5 2> /dev/null
if check_vmlinux $5; then
ddebug "Kernel is extracted with '$3'"
return 0
fi
done
return 1
}
# Borrowed from linux/scripts/extract-vmlinux
get_kernel_size()
{
# Prepare temp files:
local img=$1 tmp=$(mktemp /tmp/vmlinux-XXX)
trap "rm -f $tmp" 0
# Try to check if it's a vmlinux already
check_vmlinux $img && get_vmlinux_size $img && return 0
# That didn't work, so retry after decompression.
try_decompress '\037\213\010' xy gunzip $img $tmp || \
try_decompress '\3757zXZ\000' abcde unxz $img $tmp || \
try_decompress 'BZh' xy bunzip2 $img $tmp || \
try_decompress '\135\0\0\0' xxx unlzma $img $tmp || \
try_decompress '\211\114\132' xy 'lzop -d' $img $tmp || \
try_decompress '\002!L\030' xxx 'lz4 -d' $img $tmp || \
try_decompress '(\265/\375' xxx unzstd $img $tmp
# Finally check for uncompressed images or objects:
[[ $? -eq 0 ]] && get_vmlinux_size $tmp && return 0
# Fallback to use iomem
local _size=0
for _seg in $(cat /proc/iomem | grep -E "Kernel (code|rodata|data|bss)" | cut -d ":" -f 1); do
_size=$(( $_size + 0x${_seg#*-} - 0x${_seg%-*} ))
done
echo $_size
}

View File

@ -0,0 +1,8 @@
#!/bin/sh
systemctl is-active kdump
if [ $? -ne 0 ]; then
exit 0
fi
/usr/lib/kdump/kdump-restart.sh

8
SOURCES/kdump-restart.sh Normal file
View File

@ -0,0 +1,8 @@
#!/bin/bash
export PATH="$PATH:/usr/bin:/usr/sbin"
exec >>/var/log/kdump-migration.log 2>&1
echo "kdump: Partition Migration detected. Rebuilding initramfs image to reload."
/usr/bin/kdumpctl rebuild
/usr/bin/kdumpctl reload

View File

@ -17,7 +17,7 @@ KDUMP_COMMANDLINE=""
# This variable lets us remove arguments from the current kdump commandline
# as taken from either KDUMP_COMMANDLINE above, or from /proc/cmdline
# NOTE: some arguments such as crashkernel will always be removed
KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug quiet log_buf_len swiotlb"
KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug quiet log_buf_len swiotlb prot_virt"
# This variable lets us append arguments to the current kdump commandline
# after processed by KDUMP_COMMANDLINE_REMOVE

View File

@ -237,12 +237,7 @@ restore_default_initrd()
check_config()
{
local -A _opt_rec
while read config_opt config_val; do
if [ -z "$config_val" ]; then
derror "Invalid kdump config value for option $config_opt"
return 1
fi
while read -r config_opt config_val; do
case "$config_opt" in
dracut_args)
if [[ $config_val == *--mount* ]]; then
@ -269,12 +264,20 @@ check_config()
derror "Deprecated kdump config option: $config_opt. Refer to kdump.conf manpage for alternatives."
return 1
;;
'')
continue
;;
*)
derror "Invalid kdump config option $config_opt"
return 1
;;
esac
if [[ -z "$config_val" ]]; then
derror "Invalid kdump config value for option '$config_opt'"
return 1
fi
if [ -n "${_opt_rec[$config_opt]}" ]; then
if [ $config_opt == _target ]; then
derror "More than one dump targets specified"
@ -1246,6 +1249,97 @@ rebuild() {
return $?
}
do_estimate() {
local kdump_mods
local -A large_mods
local baseline
local kernel_size mod_size initrd_size baseline_size runtime_size reserved_size estimated_size recommended_size
local size_mb=$(( 1024 * 1024 ))
setup_initrd
if [ ! -f "$TARGET_INITRD" ]; then
derror "kdumpctl estimate: kdump initramfs is not built yet."
exit 1
fi
kdump_mods="$(lsinitrd "$TARGET_INITRD" -f /usr/lib/dracut/loaded-kernel-modules.txt | tr '\n' ' ')"
baseline=$(kdump_get_arch_recommend_size)
if [[ "${baseline: -1}" == "M" ]]; then
baseline=${baseline%M}
elif [[ "${baseline: -1}" == "G" ]]; then
baseline=$(( ${baseline%G} * 1024 ))
elif [[ "${baseline: -1}" == "T" ]]; then
baseline=$(( ${baseline%Y} * 1048576 ))
fi
# The default value when using crashkernel=auto
baseline_size=$((baseline * size_mb))
# Current reserved crashkernel size
reserved_size=$(cat /sys/kernel/kexec_crash_size)
# A pre-estimated value for userspace usage and kernel
# runtime allocation, 64M should good for most cases
runtime_size=$((64 * size_mb))
# Kernel image size
kernel_size=$(get_kernel_size "$KDUMP_KERNEL")
# Kdump initramfs size
initrd_size=$(du -b "$TARGET_INITRD" | awk '{print $1}')
# Kernel modules static size after loaded
mod_size=0
while read -r _name _size _; do
if [[ ! " $kdump_mods " == *" $_name "* ]]; then
continue
fi
mod_size=$((mod_size + _size))
# Mark module with static size larger than 2M as large module
if [[ $((_size / size_mb)) -ge 1 ]]; then
large_mods[$_name]=$_size
fi
done <<< "$(< /proc/modules)"
# Extra memory usage required for LUKS2 decryption
crypt_size=0
for _dev in $(get_all_kdump_crypt_dev); do
_crypt_info=$(cryptsetup luksDump "/dev/block/$_dev")
[[ $(echo "$_crypt_info" | sed -n "s/^Version:\s*\(.*\)/\1/p" ) == "2" ]] || continue
for _mem in $(echo "$_crypt_info" | sed -n "s/\sMemory:\s*\(.*\)/\1/p" | sort -n ); do
crypt_size=$((crypt_size + _mem * 1024))
break
done
done
[[ $crypt_size -ne 0 ]] && echo -e "Encrypted kdump target requires extra memory, assuming using the keyslot with minimun memory requirement\n"
estimated_size=$((kernel_size + mod_size + initrd_size + runtime_size + crypt_size))
if [[ $baseline_size -gt $estimated_size ]]; then
recommended_size=$baseline_size
else
recommended_size=$estimated_size
fi
echo "Reserved crashkernel: $((reserved_size / size_mb))M"
echo "Recommended crashkernel: $((recommended_size / size_mb))M"
echo
echo "Kernel image size: $((kernel_size / size_mb))M"
echo "Kernel modules size: $((mod_size / size_mb))M"
echo "Initramfs size: $((initrd_size / size_mb))M"
echo "Runtime reservation: $((runtime_size / size_mb))M"
[[ $crypt_size -ne 0 ]] && \
echo "LUKS required size: $((crypt_size / size_mb))M"
echo -n "Large modules:"
if [[ "${#large_mods[@]}" -eq 0 ]]; then
echo " <none>"
else
echo ""
for _mod in "${!large_mods[@]}"; do
echo " $_mod: ${large_mods[$_mod]}"
done
fi
if [[ $reserved_size -lt $recommended_size ]]; then
echo "WARNING: Current crashkernel size is lower than recommended size $((recommended_size / size_mb))M."
fi
}
if [ ! -f "$KDUMP_CONFIG_FILE" ]; then
derror "Error: No kdump config file found!"
exit 1
@ -1301,8 +1395,11 @@ main ()
showmem)
show_reserved_mem
;;
estimate)
do_estimate
;;
*)
dinfo $"Usage: $0 {start|stop|status|restart|reload|rebuild|propagate|showmem}"
dinfo $"Usage: $0 {estimate|start|stop|status|restart|reload|rebuild|propagate|showmem}"
exit 1
esac
}

View File

@ -44,6 +44,11 @@ impossible to use password authentication during kdump.
.TP
.I showmem
Prints the size of reserved memory for crash kernel in megabytes.
.TP
.I estimate
Estimate a suitable crashkernel value for current machine. This is a
best-effort estimate. It will print a recommanded crashkernel value
based on current kdump setup, and list some details of memory usage.
.SH "SEE ALSO"
.BR kdump.conf (5),

View File

@ -0,0 +1,177 @@
From 3422e1d6bc3511c5af9cb05ba74ad97dd93ffd7f Mon Sep 17 00:00:00 2001
From: Julien Thierry <jthierry@redhat.com>
Date: Tue, 24 Nov 2020 10:45:24 +0000
Subject: [PATCH] [PATCH 1/2] Add --dry-run option to prevent writing the
dumpfile
Add a --dry-run option to run all operations without writing the
dump to the output file.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
---
makedumpfile.8 | 6 ++++++
makedumpfile.c | 37 ++++++++++++++++++++++++++++++-------
makedumpfile.h | 2 ++
print_info.c | 3 +++
4 files changed, 41 insertions(+), 7 deletions(-)
diff --git a/makedumpfile-1.6.8/makedumpfile.8 b/makedumpfile-1.6.8/makedumpfile.8
index b68a7e3..5e902cd 100644
--- a/makedumpfile-1.6.8/makedumpfile.8
+++ b/makedumpfile-1.6.8/makedumpfile.8
@@ -637,6 +637,12 @@ Show the version of makedumpfile.
Only check whether the command-line parameters are valid or not, and exit.
Preferable to be given as the first parameter.
+.TP
+\fB\-\-dry-run\fR
+Do not write the output dump file while still performing operations specified
+by other options.
+This option cannot be used with the --dump-dmesg, --reassemble and -g options.
+
.SH ENVIRONMENT VARIABLES
.TP 8
diff --git a/makedumpfile-1.6.8/makedumpfile.c b/makedumpfile-1.6.8/makedumpfile.c
index ecd63fa..8c80c49 100644
--- a/makedumpfile-1.6.8/makedumpfile.c
+++ b/makedumpfile-1.6.8/makedumpfile.c
@@ -1372,6 +1372,8 @@ open_dump_file(void)
if (info->flag_flatten) {
fd = STDOUT_FILENO;
info->name_dumpfile = filename_stdout;
+ } else if (info->flag_dry_run) {
+ fd = -1;
} else if ((fd = open(info->name_dumpfile, open_flags,
S_IRUSR|S_IWUSR)) < 0) {
ERRMSG("Can't open the dump file(%s). %s\n",
@@ -4711,6 +4713,9 @@ write_and_check_space(int fd, void *buf, size_t buf_size, char *file_name)
{
int status, written_size = 0;
+ if (info->flag_dry_run)
+ return TRUE;
+
while (written_size < buf_size) {
status = write(fd, buf + written_size,
buf_size - written_size);
@@ -4748,13 +4753,12 @@ write_buffer(int fd, off_t offset, void *buf, size_t buf_size, char *file_name)
}
if (!write_and_check_space(fd, &fdh, sizeof(fdh), file_name))
return FALSE;
- } else {
- if (lseek(fd, offset, SEEK_SET) == failed) {
- ERRMSG("Can't seek the dump file(%s). %s\n",
- file_name, strerror(errno));
- return FALSE;
- }
+ } else if (!info->flag_dry_run &&
+ lseek(fd, offset, SEEK_SET) == failed) {
+ ERRMSG("Can't seek the dump file(%s). %s\n", file_name, strerror(errno));
+ return FALSE;
}
+
if (!write_and_check_space(fd, buf, buf_size, file_name))
return FALSE;
@@ -9112,7 +9116,7 @@ close_dump_memory(void)
void
close_dump_file(void)
{
- if (info->flag_flatten)
+ if (info->flag_flatten || info->flag_dry_run)
return;
if (close(info->fd_dumpfile) < 0)
@@ -10985,6 +10989,11 @@ check_param_for_generating_vmcoreinfo(int argc, char *argv[])
return FALSE;
+ if (info->flag_dry_run) {
+ MSG("--dry-run cannot be used with -g.\n");
+ return FALSE;
+ }
+
return TRUE;
}
@@ -11029,6 +11038,11 @@ check_param_for_reassembling_dumpfile(int argc, char *argv[])
|| info->flag_exclude_xen_dom || info->flag_split)
return FALSE;
+ if (info->flag_dry_run) {
+ MSG("--dry-run cannot be used with --reassemble.\n");
+ return FALSE;
+ }
+
if ((info->splitting_info
= malloc(sizeof(struct splitting_info) * info->num_dumpfile))
== NULL) {
@@ -11057,6 +11071,11 @@ check_param_for_creating_dumpfile(int argc, char *argv[])
|| (info->flag_read_vmcoreinfo && info->name_xen_syms))
return FALSE;
+ if (info->flag_dry_run && info->flag_dmesg) {
+ MSG("--dry-run cannot be used with --dump-dmesg.\n");
+ return FALSE;
+ }
+
if (info->flag_flatten && info->flag_split)
return FALSE;
@@ -11520,6 +11539,7 @@ static struct option longopts[] = {
{"work-dir", required_argument, NULL, OPT_WORKING_DIR},
{"num-threads", required_argument, NULL, OPT_NUM_THREADS},
{"check-params", no_argument, NULL, OPT_CHECK_PARAMS},
+ {"dry-run", no_argument, NULL, OPT_DRY_RUN},
{0, 0, 0, 0}
};
@@ -11686,6 +11706,9 @@ main(int argc, char *argv[])
info->flag_check_params = TRUE;
message_level = DEFAULT_MSG_LEVEL;
break;
+ case OPT_DRY_RUN:
+ info->flag_dry_run = TRUE;
+ break;
case '?':
MSG("Commandline parameter is invalid.\n");
MSG("Try `makedumpfile --help' for more information.\n");
diff --git a/makedumpfile-1.6.8/makedumpfile.h b/makedumpfile-1.6.8/makedumpfile.h
index 5f50080..4c4222c 100644
--- a/makedumpfile-1.6.8/makedumpfile.h
+++ b/makedumpfile-1.6.8/makedumpfile.h
@@ -1322,6 +1322,7 @@ struct DumpInfo {
int flag_vmemmap; /* kernel supports vmemmap address space */
int flag_excludevm; /* -e - excluding unused vmemmap pages */
int flag_use_count; /* _refcount is named _count in struct page */
+ int flag_dry_run; /* do not create a vmcore file */
unsigned long vaddr_for_vtop; /* virtual address for debugging */
long page_size; /* size of page */
long page_shift;
@@ -2425,6 +2426,7 @@ struct elf_prstatus {
#define OPT_NUM_THREADS OPT_START+16
#define OPT_PARTIAL_DMESG OPT_START+17
#define OPT_CHECK_PARAMS OPT_START+18
+#define OPT_DRY_RUN OPT_START+19
/*
* Function Prototype.
diff --git a/makedumpfile-1.6.8/print_info.c b/makedumpfile-1.6.8/print_info.c
index e0c38b4..d2b0cb7 100644
--- a/makedumpfile-1.6.8/print_info.c
+++ b/makedumpfile-1.6.8/print_info.c
@@ -308,6 +308,9 @@ print_usage(void)
MSG(" the crashkernel range, then calculates the page number of different kind per\n");
MSG(" vmcoreinfo. So currently /proc/kcore need be specified explicitly.\n");
MSG("\n");
+ MSG(" [--dry-run]:\n");
+ MSG(" This option runs makedumpfile without writting output dump file.\n");
+ MSG("\n");
MSG(" [-D]:\n");
MSG(" Print debugging message.\n");
MSG("\n");
--
2.29.2

View File

@ -0,0 +1,107 @@
From 6f3e75a558ed50d6ff0b42e3f61c099b2005b7bb Mon Sep 17 00:00:00 2001
From: Julien Thierry <jthierry@redhat.com>
Date: Tue, 24 Nov 2020 10:45:25 +0000
Subject: [PATCH] [PATCH 2/2] Add shorthand --show-stats option to show report
stats
Provide shorthand --show-stats option to enable report messages
without needing to set a particular value for message-level.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
---
makedumpfile.8 | 5 +++++
makedumpfile.c | 9 ++++++++-
makedumpfile.h | 1 +
print_info.c | 7 ++++++-
4 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/makedumpfile-1.6.8/makedumpfile.8 b/makedumpfile-1.6.8/makedumpfile.8
index 5e902cd..dcca2dd 100644
--- a/makedumpfile-1.6.8/makedumpfile.8
+++ b/makedumpfile-1.6.8/makedumpfile.8
@@ -643,6 +643,11 @@ Do not write the output dump file while still performing operations specified
by other options.
This option cannot be used with the --dump-dmesg, --reassemble and -g options.
+.TP
+\fB\-\-show-stats\fR
+Display report messages. This is an alternative to enabling bit 4 in the level
+provided to --message-level.
+
.SH ENVIRONMENT VARIABLES
.TP 8
diff --git a/makedumpfile-1.6.8/makedumpfile.c b/makedumpfile-1.6.8/makedumpfile.c
index 8c80c49..ba0003a 100644
--- a/makedumpfile-1.6.8/makedumpfile.c
+++ b/makedumpfile-1.6.8/makedumpfile.c
@@ -11540,13 +11540,14 @@ static struct option longopts[] = {
{"num-threads", required_argument, NULL, OPT_NUM_THREADS},
{"check-params", no_argument, NULL, OPT_CHECK_PARAMS},
{"dry-run", no_argument, NULL, OPT_DRY_RUN},
+ {"show-stats", no_argument, NULL, OPT_SHOW_STATS},
{0, 0, 0, 0}
};
int
main(int argc, char *argv[])
{
- int i, opt, flag_debug = FALSE;
+ int i, opt, flag_debug = FALSE, flag_show_stats = FALSE;
if ((info = calloc(1, sizeof(struct DumpInfo))) == NULL) {
ERRMSG("Can't allocate memory for the pagedesc cache. %s.\n",
@@ -11709,6 +11710,9 @@ main(int argc, char *argv[])
case OPT_DRY_RUN:
info->flag_dry_run = TRUE;
break;
+ case OPT_SHOW_STATS:
+ flag_show_stats = TRUE;
+ break;
case '?':
MSG("Commandline parameter is invalid.\n");
MSG("Try `makedumpfile --help' for more information.\n");
@@ -11718,6 +11722,9 @@ main(int argc, char *argv[])
if (flag_debug)
message_level |= ML_PRINT_DEBUG_MSG;
+ if (flag_show_stats)
+ message_level |= ML_PRINT_REPORT_MSG;
+
if (info->flag_check_params)
/* suppress debugging messages */
message_level = DEFAULT_MSG_LEVEL;
diff --git a/makedumpfile-1.6.8/makedumpfile.h b/makedumpfile-1.6.8/makedumpfile.h
index 4c4222c..2fcb62e 100644
--- a/makedumpfile-1.6.8/makedumpfile.h
+++ b/makedumpfile-1.6.8/makedumpfile.h
@@ -2427,6 +2427,7 @@ struct elf_prstatus {
#define OPT_PARTIAL_DMESG OPT_START+17
#define OPT_CHECK_PARAMS OPT_START+18
#define OPT_DRY_RUN OPT_START+19
+#define OPT_SHOW_STATS OPT_START+20
/*
* Function Prototype.
diff --git a/makedumpfile-1.6.8/print_info.c b/makedumpfile-1.6.8/print_info.c
index d2b0cb7..ad4184e 100644
--- a/makedumpfile-1.6.8/print_info.c
+++ b/makedumpfile-1.6.8/print_info.c
@@ -309,7 +309,12 @@ print_usage(void)
MSG(" vmcoreinfo. So currently /proc/kcore need be specified explicitly.\n");
MSG("\n");
MSG(" [--dry-run]:\n");
- MSG(" This option runs makedumpfile without writting output dump file.\n");
+ MSG(" Do not write the output dump file while still performing operations specified\n");
+ MSG(" by other options. This option cannot be used with --dump-dmesg, --reassemble\n");
+ MSG(" and -g options.\n");
+ MSG("\n");
+ MSG(" [--show-stats]:\n");
+ MSG(" Set message-level to print report messages\n");
MSG("\n");
MSG(" [-D]:\n");
MSG(" Print debugging message.\n");
--
2.29.2

View File

@ -0,0 +1,59 @@
From 0ef2ca6c9fa2f61f217a4bf5d7fd70f24e12b2eb Mon Sep 17 00:00:00 2001
From: Kazuhito Hagio <k-hagio-ab@nec.com>
Date: Thu, 4 Feb 2021 16:29:06 +0900
Subject: [PATCH] [PATCH] Show write byte size in report messages
Show write byte size in report messages. This value can be different
from the size of the actual file because of some holes on dumpfile
data structure.
$ makedumpfile --show-stats -l -d 1 vmcore dump.ld1
...
Total pages : 0x0000000000080000
Write bytes : 377686445
...
# ls -l dump.ld1
-rw------- 1 root root 377691573 Feb 4 16:28 dump.ld1
Note that this value should not be used with /proc/kcore to determine
how much disk space is needed for crash dump, because the real memory
usage when a crash occurs can vary widely.
Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
---
makedumpfile.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/makedumpfile-1.6.8/makedumpfile.c b/makedumpfile-1.6.8/makedumpfile.c
index fcd766b..894c88e 100644
--- a/makedumpfile-1.6.8/makedumpfile.c
+++ b/makedumpfile-1.6.8/makedumpfile.c
@@ -48,6 +48,8 @@ char filename_stdout[] = FILENAME_STDOUT;
static unsigned long long cache_hit;
static unsigned long long cache_miss;
+static unsigned long long write_bytes;
+
static void first_cycle(mdf_pfn_t start, mdf_pfn_t max, struct cycle *cycle)
{
cycle->start_pfn = round(start, info->pfn_cyclic);
@@ -4715,6 +4717,8 @@ write_and_check_space(int fd, void *buf, size_t buf_size, char *file_name)
{
int status, written_size = 0;
+ write_bytes += buf_size;
+
if (info->flag_dry_run)
return TRUE;
@@ -10002,6 +10006,7 @@ print_report(void)
REPORT_MSG("Memory Hole : 0x%016llx\n", pfn_memhole);
REPORT_MSG("--------------------------------------------------\n");
REPORT_MSG("Total pages : 0x%016llx\n", info->max_mapnr);
+ REPORT_MSG("Write bytes : %llu\n", write_bytes);
REPORT_MSG("\n");
REPORT_MSG("Cache hit: %lld, miss: %lld", cache_hit, cache_miss);
if (cache_hit + cache_miss)
--
2.29.2

View File

@ -0,0 +1,60 @@
From 38d921a2ef50ebd36258097553626443ffe27496 Mon Sep 17 00:00:00 2001
From: Coiby Xu <coxu@redhat.com>
Date: Tue, 15 Jun 2021 18:26:31 +0800
Subject: [PATCH] check for invalid physical address of /proc/kcore
when finding max_paddr
Kernel commit 464920104bf7adac12722035bfefb3d772eb04d8 ("/proc/kcore:
update physical address for kcore ram and text") sets an invalid paddr
(0xffffffffffffffff = -1) for PT_LOAD segments of not direct mapped
regions:
$ readelf -l /proc/kcore
...
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
NOTE 0x0000000000000120 0x0000000000000000 0x0000000000000000
0x0000000000002320 0x0000000000000000 0x0
LOAD 0x1000000000010000 0xd000000000000000 0xffffffffffffffff
^^^^^^^^^^^^^^^^^^
0x0001f80000000000 0x0001f80000000000 RWE 0x10000
makedumpfile uses max_paddr to calculate the number of sections for
sparse memory model thus wrong number is obtained based on max_paddr
(-1). This error could lead to the failure of copying /proc/kcore
for RHEL-8.5 on ppc64le machine [1]:
$ makedumpfile /proc/kcore vmcore1
get_mem_section: Could not validate mem_section.
get_mm_sparsemem: Can't get the address of mem_section.
makedumpfile Failed.
Let's check if the phys_start of the segment is a valid physical
address to fix this problem.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1965267
Reported-by: Xiaoying Yan <yiyan@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
---
elf_info.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/makedumpfile-1.6.8/elf_info.c b/makedumpfile-1.6.8/elf_info.c
index e8affb7..bc24083 100644
--- a/makedumpfile-1.6.8/elf_info.c
+++ b/makedumpfile-1.6.8/elf_info.c
@@ -628,7 +628,7 @@ get_max_paddr(void)
for (i = 0; i < num_pt_loads; i++) {
pls = &pt_loads[i];
- if (max_paddr < pls->phys_end)
+ if (pls->phys_start != NOT_PADDR && max_paddr < pls->phys_end)
max_paddr = pls->phys_end;
}
return max_paddr;
--
2.29.2

View File

@ -0,0 +1,43 @@
From 9a6f589d99dcef114c89fde992157f5467028c8f Mon Sep 17 00:00:00 2001
From: Tao Liu <ltao@redhat.com>
Date: Fri, 18 Jun 2021 18:28:04 +0800
Subject: [PATCH] check for invalid physical address of /proc/kcore
when making ELF dumpfile
Previously when executing makedumpfile with -E option against
/proc/kcore, makedumpfile will fail:
# makedumpfile -E -d 31 /proc/kcore kcore.dump
...
write_elf_load_segment: Can't convert physaddr(ffffffffffffffff) to an offset.
makedumpfile Failed.
It's because /proc/kcore contains PT_LOAD program headers which have
physaddr (0xffffffffffffffff). With -E option, makedumpfile will
try to convert the physaddr to an offset and fails.
Skip the PT_LOAD program headers which have such physaddr.
Signed-off-by: Tao Liu <ltao@redhat.com>
Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
---
makedumpfile.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/makedumpfile-1.6.8/makedumpfile.c b/makedumpfile-1.6.8/makedumpfile.c
index 894c88e..fcb571f 100644
--- a/makedumpfile-1.6.8/makedumpfile.c
+++ b/makedumpfile-1.6.8/makedumpfile.c
@@ -7764,7 +7764,7 @@ write_elf_pages_cyclic(struct cache_data *cd_header, struct cache_data *cd_page)
if (!get_phdr_memory(i, &load))
return FALSE;
- if (load.p_type != PT_LOAD)
+ if (load.p_type != PT_LOAD || load.p_paddr == NOT_PADDR)
continue;
off_memory= load.p_offset;
--
2.29.2

View File

@ -226,7 +226,7 @@ check_user_configured_target()
# For user configured target, use $SAVE_PATH as the dump path within the target
if [ ! -d "$_mnt/$SAVE_PATH" ]; then
perror_exit "Dump path \"$SAVE_PATH\" does not exist in dump target \"$_target\""
perror_exit "Dump path \"$_mnt/$SAVE_PATH\" does not exist in dump target \"$_target\""
fi
check_size fs "$_target"
@ -305,7 +305,6 @@ get_override_resettable()
fi
}
# $1: function name
for_each_block_target()
{
@ -320,8 +319,6 @@ for_each_block_target()
return 0
}
#judge if a specific device with $1 is unresettable
#return false if unresettable.
is_unresettable()
@ -358,32 +355,15 @@ check_resettable()
return 1
}
# $1: maj:min
is_crypt()
{
local majmin=$1 dev line ID_FS_TYPE=""
line=$(udevadm info --query=property --path=/sys/dev/block/$majmin \
| grep "^ID_FS_TYPE")
eval "$line"
[[ "$ID_FS_TYPE" = "crypto_LUKS" ]] && {
dev=$(udevadm info --query=all --path=/sys/dev/block/$majmin | awk -F= '/DEVNAME/{print $2}')
derror "Device $dev is encrypted."
return 0
}
return 1
}
check_crypt()
{
local _ret _target
local _dev
for_each_block_target is_crypt
_ret=$?
[ $_ret -eq 0 ] && return
return 1
for _dev in $(get_kdump_targets); do
if [[ -n $(get_luks_crypt_dev "$(get_maj_min "$_dev")") ]]; then
derror "Device $_dev is encrypted." && return 1
fi
done
}
if ! check_resettable; then

View File

@ -1,6 +1,6 @@
Name: kexec-tools
Version: 2.0.20
Release: 46%{?dist}.2
Release: 57%{?dist}
License: GPLv2
Group: Applications/System
Summary: The kexec/kdump userspace component
@ -36,6 +36,8 @@ Source30: kdump.sysconfig.aarch64
Source31: fadump-howto.txt
Source32: 60-kdump.install
Source33: kdump-logger.sh
Source34: kdump-migrate-action.sh
Source35: kdump-restart.sh
#######################################
# These are sources for mkdumpramfs
@ -52,6 +54,9 @@ Source107: dracut-kdump-emergency.target
Source108: dracut-early-kdump.sh
Source109: dracut-early-kdump-module-setup.sh
%ifarch ppc64 ppc64le
Requires(post): servicelog
%endif
Requires(post): systemd-units
Requires(preun): systemd-units
Requires(postun): systemd-units
@ -111,7 +116,11 @@ Patch613: kexec-tools-2.0.20-eppic-Remove-duplicated-variable-declaration.patch
# Patches 701 onward for makedumpfile
Patch701: rhelonly-kexec-tools-2.0.20-makedumpfile-arm64-Add-support-for-ARMv8.2-LVA-52-bi.patch
Patch702: kexec-tools-2.0.20-makedumpfile-Add-dry-run-option-to-prevent-writing.patch
Patch703: kexec-tools-2.0.20-makedumpfile-Add-shorthand-show-stats-option-to-show.patch
Patch704: kexec-tools-2.0.20-makedumpfile-Show-write-byte-size-in-report-messages.patch
Patch705: kexec-tools-2.0.22-makedumpfile-check-for-invalid-physical-address-proc-kcore-when-finding-max_paddr.patch
Patch706: kexec-tools-2.0.22-makedumpfile-check-for-invalid-physical-address-proc-kcore-when-making-ELF-dumpfile.patch
%description
kexec-tools provides /usr/sbin/kexec binary that facilitates a new
@ -141,6 +150,11 @@ tar -z -x -v -f %{SOURCE19}
%patch612 -p1
%patch613 -p1
%patch701 -p1
%patch702 -p1
%patch703 -p1
%patch704 -p1
%patch705 -p1
%patch706 -p1
%ifarch ppc
%define archdef ARCH=ppc
@ -218,6 +232,8 @@ install -m 644 %{SOURCE13} $RPM_BUILD_ROOT%{_udevrulesdir}/98-kexec.rules
%endif
%ifarch ppc64 ppc64le
install -m 644 %{SOURCE14} $RPM_BUILD_ROOT%{_udevrulesdir}/98-kexec.rules
install -m 755 %{SOURCE34} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-migrate-action.sh
install -m 755 %{SOURCE35} $RPM_BUILD_ROOT%{_prefix}/lib/kdump/kdump-restart.sh
%endif
%ifnarch s390x
install -m 755 %{SOURCE29} $RPM_BUILD_ROOT%{_udevrulesdir}/../kdump-udev-throttler
@ -270,6 +286,13 @@ mv $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/* $RPM_BUILD_ROOT/%{d
%systemd_post kdump.service
touch /etc/kdump.conf
%ifarch ppc64 ppc64le
servicelog_notify --remove --command=/usr/lib/kdump/kdump-migrate-action.sh
servicelog_notify --add --command=/usr/lib/kdump/kdump-migrate-action.sh --match='refcode="#MIGRATE" and serviceable=0' --type=EVENT --method=pairs_stdin
%endif
# This portion of the script is temporary. Its only here
# to fix up broken boxes that require special settings
# in /etc/sysconfig/kdump. It will be removed when
@ -297,6 +320,9 @@ fi
%systemd_postun_with_restart kdump.service
%preun
%ifarch ppc64 ppc64le
servicelog_notify --remove --command=/usr/lib/kdump/kdump-migrate-action.sh
%endif
# Package removal, not upgrade
%systemd_preun kdump.service
@ -380,15 +406,60 @@ done
%endif
%changelog
* Thu Jul 1 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-46.2
- Write to `/var/lib/kdump` if $KDUMP_BOOTDIR not writable
* Wed May 12 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-46.1
- Implement IP netmask calculation to replace "ipcalc -m"
* Thu Feb 25 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-46
* Fri Aug 27 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-57
- kdumpctl: enable secure boot on ppc64le LPARs
* Fri Aug 6 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-56
- kdumpctl: fix a typo
* Mon Aug 2 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-55
- kdump/ppc64: migration action registration clean up
* Fri Jul 23 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-54
- kdump/ppc64: rebuild initramfs image after migration
- Check the existence of /sys/bus/ccwgroup/devices/*/online beforehand
- kdump.sysconfig.s390: Remove "prot_virt" from kdump kernel cmdline
* Fri Jul 2 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-53
- check for invalid physical address of /proc/kcore when making ELF dumpfile
- check for invalid physical address of /proc/kcore when finding max_paddr
- fix format issue in find_online_znet_device
- check the existence of /sys/bus/ccwgroup/devices before trying to find online network device
- kdump-lib.sh: fix a warning in prepare_kdump_bootinfo()
* Thu Jun 17 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-52
- Write to `/var/lib/kdump` if $KDUMP_BOOTDIR not writable
- Iterate /sys/bus/ccwgroup/devices to tell if we should set up rd.znet
- mkdumprd: display the absolute path of dump location in the check_user_configured_target()
* Wed Jun 2 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-51
- Stop reloading kdump service on CPU hotplug event for FADump
- fadump: improve fadump-howto.txt about remote dump target setup
* Tue May 25 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-50
- rd.route should use the name from kdump_setup_ifname
- get kdump ifname once in kdump_install_netdev
* Tue May 25 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-49
- kdump-lib.sh: fix the case if no enough total RAM for kdump in get_recommend_size()
* Thu May 20 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-48
- kdumpctl: Add kdumpctl estimate
- mkdumprd: make use of the new get_luks_crypt_dev helper
- kdump-lib.sh: introduce a helper to get all crypt dev used by kdump
- kdump-lib.sh: introduce a helper to get underlying crypt device
- RHEL-only: keep total memory size coherent to RHEL-only kernel patch
- Show write byte size in report messages
- Add shorthand --show-stats option to show report stats
- Add --dry-run option to prevent writing the dumpfile
- kdump-lib.sh: introduce functions to return recommened mem size
* Mon May 10 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-47
- Implement IP netmask calculation to replace "ipcalc -m"
- kdumpctl: fix check_config error when kdump.conf is empty
- Fix incorrect vmcore permissions when dumped through ssh
- Fix incorrect permissions on kdump dmesg file
* Mon Jan 25 2021 Pingfan Liu <piliu@redhat.com> - 2.0.20-45
- origin/rhel-8.4.0) Revert "Revert "Append both nofail and x-systemd.before to kdump mount target""
- kdump.conf: add ipv6 example for nfs and ssh dump