kdump-error-handler.sh does nothing except calling three functions,
it can be easily merged into kdump.sh by using a parameter to run the
error handling routine.
kdump-lib-initramfs.sh was created to hold the three shared functions
and related code, so by merging these two files, kdump-lib-initramfs.sh
can be simplified by a lot.
Following up commits will clean up kdump-lib-initramfs.sh.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
Move all functions needed in the second kernel from kdump-lib.sh
to kdump-lib-initramfs.sh, and update shebang headers.
Now, kdump-lib-initramfs.sh is an independent lib script, no longer
depend on kdump-lib.sh, and kdump-lib.sh is no longer needed for
the second kernel.
In later commits, functions in kdump-lib-initramfs.sh will be reworked
to be POSIX compatible, kdump-lib.sh will contain bash only functions.
POSIX shell have very limited features, eg. `local` keyword doesn't
exist in POSIX but we rely on that heavily. So kdump-lib.sh will
use bash syntax and contain the most complex helper and codes.
kdump-lib-initramfs.sh will contain the minimum set of helpers,
and be shared by both the first and second kernel.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
This is a batch update done with:
shfmt -s -w mkfadumprd mkdumprd kdumpctl *-module-setup.sh
Clean up code style and reduce code base size, no behaviour change.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
Declare and assign separately to avoid masking return values:
https://github.com/koalaman/shellcheck/wiki/SC2155
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
kdumpctl, mkdumprd, *-module-setup.sh only target bash, since they
only run in first kernel and depend on dracut, and dracut depends
on bash. So use '[[ ]]' to replace '[ ]'.
This is a batch update done with following command:
`sed -i -e 's/\(\s\)\[\s\([^]]*\)\s\]/\1\[\[\ \2 \]\]/g' kdumpctl, mkdumprd, *-module-setup.sh`
and replaced [ ... -a ... ] with [[ ... ]] && [[ ... ]] manually.
See https://tldp.org/LDP/abs/html/testconstructs.html for more details
on '[[ ]]', it's more versatile, safer, and slightly faster than '[ ]'.
This will also help shfmt to clean up the code in later commits.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
This is a batch update done with following command:
`sed -i -e 's/`\([^`]*\)`/\$(\1)/g' mkfadumprd mkdumprd \
kdumpctl dracut-module-setup.sh dracut-fadump-module-setup.sh \
dracut-early-kdump-module-setup.sh`
And manually converted some corner cases. This fixes
all related issues detected by shellcheck.
Make it easier to do clean up in later commits.
Check following link for reasons to switch to the new syntax:
https://github.com/koalaman/shellcheck/wiki/SC2006
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
Use bash builtin string substitution instead, as suggested by:
https://github.com/koalaman/shellcheck/wiki/SC2001
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
Some `cat` calls are useless, remove them to make it cleaner.
See: https://github.com/koalaman/shellcheck/wiki/SC2002
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
Some functions are executed in subshell to avoid variable environment
pollution. But the surrounding $() is not needed, and it may lead to
executing output which is unexpected here.
See: https://github.com/koalaman/shellcheck/wiki/SC2091
Signed-off-by: Kairui Song <kasong@redhat.com>
Suggested-by: Coiby Xu <coxu@redhat.com>
Wrap the variable with {...}, else it may get interpreted as array due
to the '[' char next to it.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
As suggested by:
https://github.com/koalaman/shellcheck/wiki/SC2199
The array is not quoted here but implicitly concatenate still happens,
could be harmless but shellcheck complains about it so fix it.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
To make arguments list work as expected, array is preferred.
Check following link for details:
https://github.com/koalaman/shellcheck/wiki/SC2089
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
For storing arguments, plain string is not a good choice. Array is
preferred:
See: https://github.com/koalaman/shellcheck/wiki/SC2089
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
Currently get_ssh_size is not working as expected, it should return the
target's available space, but it will include df's header row string as
the result. Fix this issue by only use the last output line.
And the _opt variable will be used as args so it should be an array.
Also remove the awk call, just use `df --output=avail` instead.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
To make arguments list work as expected, array is preferred.
Use xargs only to parse the "dracut_args" config value, and pass the
array directly to dracut.
Check following link for details:
https://github.com/koalaman/shellcheck/wiki/SC2089
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
For loops over find output are fragile, use a while read loop:
https://github.com/koalaman/shellcheck/wiki/SC2044
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com
Also fixed kdumpctl, use `awk` instead of `cut` to read
core_collector's executable name correctly when its arguments
are not seperated by space.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
Add a helper kdump_get_conf_val to replace get_option_value.
It can help cover more corner cases in the code, like when there are
multiple spaces in config file, config value separated by a tab,
heading spaces, or trailing comments.
And this uses "sed group command" and "sed hold buffer", make it much
faster than previous `grep <config> | tail -1`.
This helper is supposed to provide a universal way for kexec-tools
scripts to read in config value. Currently, different scripts are
reading the config in many different fragile ways.
For example, following codes are found in kexec-tools script code base:
1. grep ^force_rebuild $KDUMP_CONFIG_FILE
echo $_force_rebuild | cut -d' ' -f2
2. grep ^kdump_post $KDUMP_CONFIG_FILE | cut -d\ -f2
3. awk '/^sshkey/ {print $2}' $conf_file
4. grep ^path $KDUMP_CONFIG_FILE | cut -d' ' -f2-
1, 2, and 4 will fail if the space is replaced by, e.g. a tab
1 and 2 might fail if there are multiple spaces between config name
and config value:
"kdump_post /var/crash/scripts/kdump-post.sh"
A space will be read instead of config value.
1, 2, 3 will fail if there are space in file path, like:
"kdump_post /var/crash/scripts dir/kdump-post.sh"
4 will fail if there are trailing comments:
"path /var/crash # some comment here"
And all will fail if there are heading space,
" path /var/crash"
And all will most likely cause problems if the config file contains
the same option more than once.
And all of them are slower than the new sed call. Old get_option_value
is also very slow and doesn't handle heading space.
Although we never claim to support heading space or tailing comments
before, it's harmless to be more robust on config reading, and many
conf files in /etc support heading spaces. And have a faster and
safer config reading helper makes it easier to clean up the code.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
Add a helper `kdump_read_conf` to replace read_strip_comments.
`kdump_read_conf` does a few more things:
- remove trailing spaces.
- format the content, remove duplicated spaces between name and value.
- read from KDUMP_CONFIG_FILE (/etc/kdump.conf) directly, avoid pasting
"/etc/kdump.conf" path everywhere in the code.
- check if config file exists, just in case.
Also unify the environmental variable, now KDUMP_CONFIG_FILE stands for
the default config location.
This helps avoid some shell pitfalls about spaces when reading config.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
EditorConfig file is helpful for tools like `shfmt`, also could be a
hint for code styling.
The code style spec used in this new added .editorconfig file is
generated based on existing code style.
Following commits will make mkfadumprd, mkdumprd, kdumpctl, kdump-lib.sh,
and *-module-setup.sh only be used in first kernel, so use bash syntax
for these scripts. Other scripts will use sh syntax for better POSIX
compatibility.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
At least, this is a plausible suspect for #1993505 - thanks to
@kevin for identifying it - and fixing it should be safe and
correct, so we may as well do it and see if it helps.
While kdump migration action is registered for LPM event, ensure it is
cleared as appropriate to avoid duplicate/stale notification entries.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Kairui Song <kasong@redhat.com>
On s390x KVM machines, the following errors would show when building kdump
initramfs that dumps vmcore to a remote target,
$ kdumpctl rebuild
/usr/lib/dracut/modules.d/99kdumpbase/module-setup.sh: line 475: /sys/bus/ccwgroup/devices/online: No such file or directory
/usr/lib/dracut/modules.d/99kdumpbase/module-setup.sh: line 476: [: -ne: unary operator expected
This happens because s390x KVM machines use virtual network and
/sys/bus/ccwgroup/devices/ exists but is empty. Fix it by check
the existence of file "/sys/bus/ccwgroup/devices/*/online".
Fixes: commit 7d47251568
("Iterate /sys/bus/ccwgroup/devices to tell if we should set up rd.znet")
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1982474
Reported-by: Jie Li <jieli@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
t Acked-by: Kairui Song <kasong@redhat.com>
When `failure_action` is set to `dump_to_rootfs`, the message:
"Waiting for rootfs mount, will timeout after 90 seconds"
is actually wrong. Kdump will simply call `systemctl start sysroot.mount`,
but the timeout value of sysroot.mount depends on the unit service and
dracut parameters. And by default, dracut will set
JobRunningTimeoutSec=0 and JobTimeoutSec=0 for the device units,
which means it will wait forever. (see wait_for_dev function in dracut)
For some devices, this can be fixed by setting rd.timeout=90. But when
initqueue is set enabled during initramfs build, dracut will force set
timeout for host devices to `0`. (see 99base/module-setup.sh).
Depending on dracut / systemd can make things unpredictable and break as
parameters or code change. To make things easy to understand and
maintain, just call `systemctl` with `--no-block` params, and implement
a standalone wait loop. Now `dump_to_rootfs` will actually wait for
90s then timeout.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Coiby Xu <coxu@redhat.com>
Dump capture initramfs needs rebuild after partition migration (LPM).
Use servicelog notification mechanism to invoke kdump rebuild after
migration.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
"prot_virt" enables the kernel to run Secure Execution virtual machines
on s390. These virtual machines are isolated from the hypervisor and
thus protected against tampering by a malicious host. Enabling
"prot_virt" requires a minimum of ~2.5GB memory which exceeds what is
typically reserved for the crashkernel. Thus remove "prot_virt" from the
command line for the 2nd kernel to prevent it to run out-of-memory.
For more discussions about this, see:
https://lists.fedoraproject.org/archives/list/kexec@lists.fedoraproject.org/thread/QSRRNV4ALKXUJC2VM3US4Z2NSQRHVMXB/
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Packaging guidelines have been amended to not require systemd for scriptlets,
see https://docs.fedoraproject.org/en-US/packaging-guidelines/Scriptlets/#_scriptlets.
The comment duplicates what the macro contains.
systemd-sysv-convert binary was removed in 2013, trying to call it is
unlikely to succeed.
chkconfig binary is provided by the chkconfig package, which is not in
Requires. (And makes little sense to call nowadays anyway.)
The new `crashkernel.default` file in kernel package can be used as the
ck_cmdline source.
Also keep the legacy code so old kernel packages will still work.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
This reverts commit 073c30973c, i.e.
re-enable the kexec file load by default since this dual signature
issue no longer bothers Fedora 34.
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
When kdump failed due to initqueue timeout, the sysroot.mount and other
serivces could be stuck in `start` but `dead` status:
Example output of systemctl:
dev-disk-by\x2duuid-530830d1\x2df2c7\x2d4c9a\x2d9a82\x2d148609097521.device loaded inactive dead start
<... snip ...>
squash-root.mount loaded active mounted /squash/root
squash.mount loaded active mounted /squash
sysroot.mount loaded inactive dead start /sysroot
<... snip ...>
dracut-cmdline.service loaded active exited dracut cmdline hook
dracut-initqueue.service loaded activating start start dracut initqueue hook
dracut-mount.service loaded inactive dead start dracut mount hook
At this point calling `systemctl start sysroot.mount` will just hang as
systemd will just wait for the services that are stuck in `start`
status. So call `systemctl cancel` here to cancel all pending jobs and
have a clean start for mounting sysroot.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Coiby Xu <coxu@redhat.com>
