Resolves: bz1951415
Upstream: fedora
Conflict: None
commit 85c725813b
Author: Kairui Song <kasong@redhat.com>
Date: Thu Apr 8 01:41:21 2021 +0800
mkdumprd: make use of the new get_luks_crypt_dev helper
Simplfy the code and also improve the performance. udevadm call is
heavy.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Resolves: bz1951415
Upstream: fedora
Conflict: None
commit 1c70cf51c7
Author: Kairui Song <kasong@redhat.com>
Date: Tue May 18 16:13:16 2021 +0800
kdump-lib.sh: introduce a helper to get all crypt dev used by kdump
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Resolves: bz1896247
Upstream: fedora
Conflict: none
commit ee160bf04d
Author: Kairui Song <kasong@redhat.com>
Date: Mon Apr 19 23:00:10 2021 +0800
Revert "Always set vm.zone_reclaim_mode = 3 in kdump kernel"
This reverts commit 5633e83318.
vm.zone_reclaim_mode may cause trashing on some machines. And after
second thought, vm.zone_reclaim_mode is barely helpful for machines
with high mem stress, so just revert it.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Resolves: bz1952652
Upstream: fedora
Conflict: none
commit d0e9c51e0d
Author: Hari Bathini <hbathini@linux.ibm.com>
Date: Thu Apr 22 18:21:59 2021 +0530
fadump: fix dump capture failure to root disk
If the dump target is the root disk, kdump scripts add an entry in
/etc/fstab for root disk with /sysroot as the mount point. The root
disk, passed through root=<> kernel commandline parameter, is mounted
at /sysroot in read-only mode before switching from initial ramdisk.
So, in fadump mode, a remount of /sysroot to read-write mode is needed
to capture dump successfully, because /sysroot is already mounted as
read-only based on root=<> boot parameter.
Commit e8ef4db8ff ("Fix dump_fs mount point detection and fallback
mount") removed initialization of $_op variable, the variable holding
the options the dump target was mounted with, leading to the below
error as remount was skipped:
kdump[586]: saving to /sysroot/var/crash/127.0.0.1-2021-04-22-07:22:08/
kdump.sh[587]: mkdir: cannot create directory '/sysroot/var/crash/127.0.0.1-2021-04-22-07:22:08/': Read-only file system
kdump[589]: saving vmcore failed
Restore $_op variable initialization in dump_fs() function to fix this.
Fixes: e8ef4db8ff ("Fix dump_fs mount point detection and fallback mount")
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
Resolves: bz1924116
Upstream: fedora
Conflict: none
commit 6a2e820d87
Author: Sourabh Jain <sourabhjain@linux.ibm.com>
Date: Sun Feb 21 17:23:37 2021 +0530
Stop reloading kdump service on CPU hotplug event for FADump
As FADump does not require an explicit elfcorehdr update whenever there is CPU
hotplug event so let's stop kdump service reload for FADump when CPU hotplug
event is triggered.
A new label is added to handle CPU and memory hotplug events separately. The
updated CPU hotplug event handler make sure that kdump service should not be
reloaded when FADump is configured.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Reviewed-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
Resolves: bz1947928
Upstream: fedora
Conflict: none
commit 475e33030b
Author: Tao Liu <ltao@redhat.com>
Date: Sun Apr 25 17:05:42 2021 +0800
Make dracut-squash required for kexec-tools
This patch reverts commit "Make dracut-squash a weak dep".
Although kexec-tools can work without dracut-squash, it is essential
for kdump to run properly in cases [1][2] where minimal amount of memory
consumption is expected. Thus dracut-squash is needed for it.
[1] https://lists.fedoraproject.org/archives/list/kexec@lists.fedoraproject.org/message/SJX7CW3WLOYSFI2YJKGTUGDBWSCMZXVZ/
[2] https://www.spinics.net/lists/systemd-devel/msg05864.html
Signed-off-by: Tao Liu <ltao@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
Resolves: bz1955453
Upstream: fedora
Conflict: none
commit ca05b754af
Author: Tao Liu <ltao@redhat.com>
Date: Mon May 10 22:10:26 2021 +0800
Fix incorrect file permissions of vmcore-dmesg-incomplete.txt
vmcore-dmesg-incomplete.txt is generated by shell redirection,
which taking the default umask value. When dmesg collector exits
with non-zero, the file will exist and anyone can have access to
it.
This patch fixed the issue by chmod the file, making it accessible
only to its owner.
Signed-off-by: Tao Liu <ltao@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
Resolves: bz1950885
Upstream: fedora
Conflict: none
commit d5fe96cd7a
Author: Tao Liu <ltao@redhat.com>
Date: Tue Apr 27 17:58:40 2021 +0800
Disable CMA in kdump 2nd kernel
kexec-tools needs to disable CMA for kdump kernel cmdline,
otherwise kdump kernel may run out of memory.
This patch strips the inherited cma=, hugetlb_cma= cmd
line from 1st kernel, and sets to be 0 for 2nd kernel.
Signed-off-by: Tao Liu <ltao@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
Resolves: bz1919052
Upstream: Fedora
Conflict: None
commit d5f6d38173
Author: Coiby Xu <coxu@redhat.com>
Date: Thu Apr 1 15:32:13 2021 +0800
Set up bond cmdline by "nmcli --get-values"
Now kdumpctl will exit if failing to set up bond cmdline.
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: bz1919052
Upstream: Fedora
Conflict: None
commit 8b08b4f17b
Author: Coiby Xu <coxu@redhat.com>
Date: Thu Apr 1 15:32:11 2021 +0800
Set up s390 znet cmdline by "nmcli --get-values"
Now kdumpctl will abort when failing to set up znet.
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: bz1919052
Upstream: Fedora
Conflict: None
commit 10c309b5f7
Author: Coiby Xu <coxu@redhat.com>
Date: Thu Apr 1 15:32:08 2021 +0800
Add helper to get value by field using "nmcli --get-values"
nmcli --get-values <field> connection show /org/freedesktop/NetworkManager/ActiveConnection/1
returns the following value for the corresponding field respectively,
Field Value
IP4.DNS "10.19.42.41 | 10.11.5.19 | 10.5.30.160"
802-3-ethernet.s390-subchannels ""
bond.options "mode=balance-rr"
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: bz1950932
Upstream: Fedora
Conflict: None
commit 8a33ffffbc
Author: Coiby Xu <coxu@redhat.com>
Date: Thu May 6 09:20:27 2021 +0800
rd.route should use the name from kdump_setup_ifname
This fixes bz1854037 which happens because kexec-tools generates rd.route for
eth0 instead of for kdump-eth0,
1. "rd.route=168.63.129.16:10.0.0.1:eth0 rd.route=169.254.169.254:10.0.0.1:eth0" is passed to the dracut cmdline by kexec-tools
2. In the 2rd kernel, dracut/modules.d/35network-manager/nm-config.sh calls
/usr/libexec/nm-initrd-generator to generate two .nmconnection files
based on the dracut cmdline, i.e. kdump-eth0.nmconnection and eth0.nmconnection,
- /run/NetworkManager/system-connections/kdump-eth0.nmconnection
[connection]
id=kdump-eth0
uuid=3ef53b1b-3908-437e-a15f-cf1f3ea2678b
type=ethernet
autoconnect-retries=1
interface-name=kdump-eth0
multi-connect=1
permissions=
wait-device-timeout=60000
[ethernet]
mac-address-blacklist=
[ipv4]
address1=10.0.0.4/24,10.0.0.1
dhcp-timeout=90
dns=168.63.129.16;
dns-search=
may-fail=false
method=manual
[ipv6]
addr-gen-mode=eui64
dhcp-timeout=90
dns-search=
method=disabled
[proxy]
- /run/NetworkManager/system-connections/eth0.nmconnection
[connection]
id=eth0
uuid=f224dc22-2891-4d7b-8f66-745029df4b53
type=ethernet
autoconnect-retries=1
interface-name=eth0
multi-connect=1
permissions=
[ethernet]
mac-address-blacklist=
[ipv4]
dhcp-timeout=90
dns=168.63.129.16;
dns-search=
method=auto
route1=168.63.129.16/32,10.0.0.1
route2=169.254.169.254/32,10.0.0.1
[ipv6]
addr-gen-mode=eui64
dhcp-timeout=90
dns-search=
method=auto
[proxy]
3. Since there's eth0.nmconnection, NetworkManager will try to get an IP for eth0 regardless of the fact it's a slave NIC and time out
```
$ ip link show
2: kdump-eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 00:0d:3a:11:86:8b brd ff:ff:ff:ff:ff:ff
3: eth0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master kdump-eth0 state UP mode DEFAULT group default qlen 1000
```
Reported-by: Huijing Hei <hhei@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: bz1947347
Upstream: Fedora
Conflict: None
commit 1ca1b71780
Author: Coiby Xu <coxu@redhat.com>
Date: Thu Apr 8 11:44:26 2021 +0800
Implement IP netmask calculation to replace "ipcalc -m"
Recently, dracut-network drops depedency on dhcp-client which requires
ipcalc. Thus the dependency chain
"kexec-tools -> dracut-network -> dhcp-client -> ipcalc"
is broken. When NIC is configured to a static IP, kexec-tools depended
on "ipcalc -m" to get netmask. This commit implements the shell
equivalent of "ipcalc -m".
The following test code shows cal_netmask_by_prefix is consistent with
"ipcalc -m",
#!/bin/bash
. dracut-module-setup.sh
for i in {0..128}; do
mask_expected=$(ipcalc -m fe::/$i| cut -d"=" -f2)
mask_actual=$(cal_netmask_by_prefix $i "-6")
if [[ "$mask_expected" != "$mask_actual" ]]; then
echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual
exit
fi
done
echo "IPv6 tests passed"
for i in {0..32}; do
mask_expected=$(ipcalc -m 8.8.8.8/$i| cut -d"=" -f2)
mask_actual=$(cal_netmask_by_prefix $i "")
if [[ "$mask_expected" != "$mask_actual" ]]; then
echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual
exit
fi
done
echo "IPv4 tests passed"
i=-2
res=$(cal_netmask_by_prefix "$i" "")
if [[ $? -ne 1 ]]; then
echo "cal_netmask_by_prefix should exit when prefix<0"
exit
fi
res=$(cal_netmask_by_prefix "$i" "")
if [[ $? -ne 1 ]]; then
echo "cal_netmask_by_prefix should exit when prefix<0"
exit
fi
i=33
$(cal_netmask_by_prefix $i "")
if [[ $? -ne 1 ]]; then
echo "cal_netmask_by_prefix should exit when prefix>32 for IPv4"
exit
fi
i=129
$(cal_netmask_by_prefix $i "-6")
if [[ $? -ne 1 ]]; then
echo "cal_netmask_by_prefix should exit when prefix>128 for IPv4"
exit
fi
echo "Bad prefixes tests passed"
echo "All tests passed"
Reported-by: Jie Li <jieli@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: bz1892558
Upstream: Fedora
Conflict: None
commit 18131894b6
Author: Pingfan Liu <piliu@redhat.com>
Date: Thu Feb 4 09:45:36 2021 +0800
kdump-lib.sh: introduce functions to return recommened mem size
There is requirement to decide the recommended memory size for the current
system. And the algorithm is based on /proc/iomem, so it can align with the
algorithm used by reserve_crashkernel() in kernel.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Related: rhbz#1938165
Upstream: fedora
Conflict: none
commit 00785873ef
Author: Tao Liu <ltao@redhat.com>
Date: Fri Mar 19 18:07:51 2021 +0800
Fix incorrect vmcore permissions when dumped through ssh
Previously when dumping vmcore to a remote machine through ssh,
the files are created remotely and file permissions are taken
from the default umask value, which making the files accessible to
anyone on the remote machine.
This patch fixed the security issue by setting a customized umask value
before the file creation on the remote machine.
Signed-off-by: Tao Liu <ltao@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
Resolves: rhbz#1938165
Upstream: fedora
Conflict: none
commit 91c802ff52
Author: Tao Liu <ltao@redhat.com>
Date: Thu Mar 18 16:52:46 2021 +0800
Fix incorrect permissions on kdump dmesg file
Also known as CVE-2021-20269. The kdump dmesg log files(kexec-dmesg.log,
vmcore-dmesg.txt) are generated by shell redirection, which take the
default umask value, making the files readable for group and others.
This patch chmod these files, making them only accessible to owner.
Signed-off-by: Tao Liu <ltao@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
