Below patches were applied to kexec-tools-2.0.3, the latest
kexec-tools-2.0.4 has included them. Delete them here.
kexec-tools-2.0.3-Load-bzImages-smaller-than-32-KiB.patch
kexec-tools-2.0.3-kdump-pass-acpi_rsdp-to-2nd-kernel-for-efi-booting.patch
kexec-tools-2.0.3-ppc-exec-stack-fix.patch
kexec-tools-2.0.3-ppc-ppc64-compile-purgatory-code-with-gcc-option-msoft-float.patch
kexec-tools-2.0.3-vmcore-dmesg-Do-not-write-beyond-end-of-buffer.patch
kexec-tools-2.0.3-vmcore-dmesg-vmcore-dmesg-Make-it-work-with-new-stru.patch
Some Smart Array (hpsa/cciss) adapters don't support reset, we need
to disable kdump on those devices, like rhel6 did.
In this patch, the dump target is checked according to below
criteria if it's a block device.
If it's cciss disk but is resettbale, can be used as dump target.
If it's cciss disk but is not resettable, can not be used as dump
target.
If it's cciss disk and not resettable, but user set OVERRIDE_RESETTABLE
to 1 in /etc/sysconfig/kdump, can be taken as dump target. Because
user know the situation and want to have a try.
In this patch, added codes include 4 parts:
1)Add an option "override_resettable <0 | 1>" into kdump.conf, and
add related section into kdump.conf man page. In mkdumprd, will check
whether user has set a value, get that value if yes. By default, the
value is 0.
2)port utility functions from dracut-functions.sh.
3)The check_resettable function checks if dump target is a resettable
block device. This includes the case where default action dump_to_rootfs
is set.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
We use function to pass stdout to a variable, like get_persistent_dev
but it will echo some error message and exit in some cases, instead of
redirect all the echo to stderr, this patch adds a function perror_exit
to fix this and simplify/cleanup related code.
Also add another function perror() for cases where no need to exit.
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Current blacklist option is different from the option in rhel6. In current
implementation blacklist just means omit the driver, but it should really
be preventing it being loaded in initramfs.
To keep consistent, just make the option as deprecated. User is suggested
to user dracut kernel cmdline rd.driver.blacklist instead.
[v1->v2]: improve man page description, thanks Vivek.
Tested in kvm guest with rd.driver.blacklist in kdump sysconfig
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Because makedumpfile is not supported on ppc and s390, so it makes
no sense to create the eppic_makedumpfile sub-package if there is
no makedumpfile binary to run it with.
Remove eppic contents related to ppc and s390 in kexec-tools.spec. This
will not build and install eppic on ppc and s390.
There's one mistake in rules related to eppic in kexec-tools.spec,
that caused kexec-tools-eppic to fail installation of i386. In this
patch remove that line of rule.
Meanwhile update eppic_030413.tar.gz.
This feature enables us to specify rules to scrub data in a
dumpfile with eppic macro instead of the current configuration
file (makedumpfile.conf). Currently, this feature works only
for symbols in vmlinux while the current feature can work also
for module symbols.
This library is backported from upstream, integrated and tested by
Dave Anderson.
If CORE_COLLECTOR is makedumpfile, "-F" is only allowed on ssh/raw,
removing it when dump_to_rootfs is necessary.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Firstly rename dump_rootfs to dump_to_rootfs to remove the ambiguity
about dump_rootfs. Then add it as one of default options. That means
user can specify dump_to_rootfs to be default action manually, then
it will take action when specified target dump failed.
Secondly, in rhel7 and fedora, when default action is not specified,
the default 'default' is dump_to_rootfs. Namely when specified target
dump failed, the kdump initrd will mount root and save kdump from
initramfs context. However in rhel6, the default 'default' is 'reboot'.
That means when specified target dump failed, the kdump initrd will
reboot systems. For being consistent with rhel6, change the default
'default' back to 'reboot'. And this can also keep logic simple, easier
to understand. Primarily, Our default dump target is root filesystem.
So keeping "default" as "dump_to_rootfs" and trying to dump to root
filesystem again when first attempt fails does not make much sense.
Meanwhile add the relevant description into kdump.conf,kdump.conf.5
and kexec-kdump-howto.txt.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
blkid do not support UUID/LABEL with quotes, remove the quotes before converting
to dev name, or the result devname will be nul.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Add a function check_config to check kdump config file.
1. move multi dump target checking into this function
2. check invalid config options and obsolete config options
3. check null config value.
[v2->v3]: add detail doc about deprecated options in kdump.conf manpage.
[v3->v4]: print out the bad config option in case it is not valid.
[v4->v5]: improve documentation according to comments from Vivek.
[v5->v6]: s/Deprecated/Invalid for invalid config options.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Marc Milgram <mmilgram@redhat.com>
check_config is actually checking the files timestamp and rebuilding initrd.
Rename it to check_rebuild instead thus check_config can be used for checking
config file valid or not.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Moving the checking target mount code a little earlier to ensure
dump target is mounted and fail out early before other handlings.
This change also cleanup a bit for the related code.
Tested UUID/devname local dump, also tested the non-exist kdump target.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Previously to_dev_name use blkid to get dev name from dump target,
but blkid can not handle UUID/LABEL with quotes so to_dev_name will
silently fail.
Because we enforce dump target being mounted before creating kdump
initrd, so change to use findmnt is fine. findmnt can handle input
params with quotes.
to_dev_name is not necessary anymore, just remove it.
Also there's another user of it is for checking if the dev is root
or not, here change to use findmnt for this as well.
Tested the rootfs dump, UUID with/without quotes dump.
Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Caspar Zhang <czhang@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
In old code, kdumpctl program exit directly when check_ssh_target failed
without printing "Starting kdump: FAILED". Then when manually invoke
"kdumpctl restart", only print "Stopping kdump: OK", but no "Starting
kdump: FAILED". That is unreasonable.
In this patch change check_ssh_target() to return when it failed. Then
check the returned value in start() function and print status if the
returned value is not 0.
Meanwhile change "space" to "tab" in function check_ssh_target(), make
those be consistent with the whole script file.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
In kdumpctl, some printings are incomplete, like "Starting kdump:" or
"Stopping kdump:". Now add the service status to the end of such kind
of printing.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
In fedora, systemd take control of services. During bootup and manually
invoke "systemctl restart kdump.service", the standard Output/Error
are all redirected to journal/syslog. Then particular LOGGER is useless
in kdumpctl.
In this patch, remove codes related to LOGGER. But for noticing user,
trying to add substituted printing to Standard Output/Err.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
tune sysconfig to save 2nd kernel memory usage
The memory in 2nd kernel is limited, we need to use as less memory as we can
to ensure vmcore capturing ok.
I'm doing below improvements in this patch:
1)
numa support is not necessary for kdump kernel, so disable it by adding numa=off
to save some kernel mm memory usage.
2)
Also add udev.children-max=2 to cmdline to limit max udev chidren processes.
3)
For ppc64, ehea driver will by default enable multi queue feature which will
use a lot of memory. Almost each ppc machine will oom for network(ssh/nfs)
kdump. The module param use_mcs=0 is used to disable multi queue feature.
Tested these params on an IBM machine with 2 numa nodes which ooms even for
local dump to rootfs.
With this patch oom does not happen for local/ssh dump, but for nfs dump oom
still happens in the middle of makedumpfile vmcore copying. So there should be
other improvement yet.
For ehea driver there's other params we can use, but because it's hard to
measure the saved memory, I'm waiting for input from IBM people. We can add
them later.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
This reverts commit 05b67ee95c.
The old commit was merged for a emergent bug fixing on release 1.5.1
of makedumpfile. Now the upstream has been updated to v1.5.3, and this
patch has been included already.
For updating to makedumpfile v1.5.3, revert it.
In previous implementation of get_host_ip, global variable HOST_IP
is used to be a intermediate variable. In this case, if finally
failed to get HOST_IP, the original default value is also overwritten.
It's buggy.
Eg. in ssh case, when faied to get host ip, the default local host ip
"127.0.0.1" is lost too. that's not expected.
Change it by adding a local variable as intermediate variable.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
In previous patch, get_host_ip was introduced to make the dump dir
more readable and back compatible with rhel6. But the implementation
is not good, making variable DATEDIR ambiguous. In this patch, modify
those codes to make it clearer.
About code checking returned value of get_host_ip, if not zero the
function do_default_action is called. That looks buggy, it will
continue going through the later code flow. Add FINAL_ACTION after
invoking do_default_action.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
This reverts commit 05b67ee95c.
The old commit was merged for a emergent bug fixing on release 1.5.1
of makedumpfile. Now the upstream has been updated to v1.5.2, and this
patch has been included already.
For updating to makedumpfile v1.5.2, revert it.
In man page, the removed comma is unnecessary, remove it in this page.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Current kdump image name prefix has changed from initrd to initramfs.
Tested on a vm running Fedora 18.
Signed-off-by: WANG Chao <chaowang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
V4: Sync with the latest teamd
V3: Drop patch 2/2 which harms readability
Move inst_dir to kdump_setup_team()
Avoid saying why teamdctl fails
Error out for vlan over team, like bridge
Remove the useless exit in kdump_get_perm_addr()
V2: remove the tmp config file in /tmp
split the non-team part
BZ: https://bugzilla.redhat.com/show_bug.cgi?id=874025
(This BZ is against RHEL7 though...)
Depends on dracut patch:
http://article.gmane.org/gmane.linux.kernel.initramfs/3043
and depends on latest version of teamd.
This patch adds support for team devices on kdump side.
I tested team active-backup mode and round-robin mode,
vmcore can be dumped over ssh successfully.
Note, currently we don't support stacked devices
on/under team, it is tricky and can be added on request.
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
After recent dracut network changes, waiting for nic ready stuff is handled
in cmdline hooks when generate udev rules. So wait_for_net_ok is not
necessary any more in kdump.sh, Removing the code here.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
With recent dracut a bootdev is needed in cmdline, so dracut can waiting for
this nic ready early in initqueue. So in this patch bootdev=${_netnic} is added
[v1->v2]: use standard cmdline file name 70bootdev.conf
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
use standard cmdline file name start with digit number: 60kdumpnic.conf
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
To simplify the code logic, remove the previous PIPESTATUS handling because
previous patch "enable pipefail bash option" added pipefail option which will
also resolve this issue.
This is a reverting of below commit:
commit 3111ff74c9
Author: Chao Wang <chaowang@redhat.com>
Date: Mon Aug 6 14:49:52 2012 +0800
Change return value to indicate the result of dump_raw() correctly.
Resolves bz845916.
For raw dump code below:
$CORE_COLLECTOR /proc/vmcore | dd of=$1 bs=$DD_BLKSIZE >> /tmp/dd_progress_f
in case pipe fails it will still return 0, Fix this by return the PIPESTATUS
Signed-off-by: Chao Wang <chaowang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Follwing code will not return 1 if CORE_COLLECTOR /proc/vmcore fail:
$CORE_COLLECTOR /proc/vmcore | ssh $_opt $2 "dd bs=512 of=$_dir/vmcore-incomplete" || return 1
Fix it by enabling pipefail option
Tested in F18 with ssh dump.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Baoquan He
Dave Young
dyoung@redhat.com
WANG Chao
Cong Wang