new fedpkg need sha512 sum, see below error:
$ fedpkg upload kexec-tools-2.0.14.tar.xz
Could not execute upload: Can not upload a new source file with a sha512 hash, as the "/home/dyoung/fedpkg/kexec-tools/sources" file contains at least one line with a md5 hash.
Please redo the whole "/home/dyoung/fedpkg/kexec-tools/sources" file using:
`/bin/fedpkg new-sources file1 file2 ...`
Thus update the sources file here.
Signed-off-by: Dave Young <dyoung@redhat.com>
kdump_to_udev_name function name cause confusion to people, change it to
kdump_get_persistent_dev which sounds better.
Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Xunlei Pang <xlpang@redhat.com>
Although we use by-id in mkdumprd as persistent policy for the dump target
checking, finally it is not used in kdump 2nd kernel because we call dracut
function in module-setup.sh without persistent policy specified that means
kdump will copy default "by-uuid" dev name.
Though by-uuid usually works and it is still better to fix it as raw disk
uuid make no sense.
Also do not need to call bind mount adjust function for raw dump, here add
another switch case for raw dump and cleanup the functions with short
variable names to keep code shorter.
Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Xunlei Pang <xlpang@redhat.com>
We maintained several kdump specific functions which are duplicate with the
similar versions in dracut, Dracut upstream splitted dracut init stuff from
dracut-functions.sh so that we can source it now.
Notes about kdump_get_presistent_dev:
Dracut now has a persistent_policy feature, for kdump when we dump to
raw disks we do not care the filesystem uuid and labels so we prefer to
search disk id instead. For raw disk set the persistent_policy before calling
get_persistent_dev ensure kdump logic still work.
Tested filesystem and raw dump in kvm guests.
[Xunlei: drop other functions other than get_persistent_dev.]
Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Xunlei Pang <xlpang@redhat.com>
Backport upstream kexec-tools commit for correct kaslr page_offset value
commit 9f62cbddddfc93d78d9aafbddf3e1208cb242f7b
Author: Thomas Garnier <thgarnie@google.com>
Date: Tue Sep 13 15:10:05 2016 +0800
kexec/arch/i386: Add support for KASLR memory randomization
Multiple changes were made on KASLR (right now in linux-next). One of
them is randomizing the virtual address of the physical mapping, vmalloc
and vmemmap memory sections. It breaks kdump ability to read physical
memory.
This change identifies if KASLR memories randomization is used by
checking if the page_offset_base variable exists. It search for the
correct PAGE_OFFSET value by looking at the loaded memory section and
find the lowest aligned on PUD (the randomization level).
Related commits on linux-next:
- 0483e1fa6e09d4948272680f691dccb1edb9677f: Base for randomization
- 021182e52fe01c1f7b126f97fd6ba048dc4234fd: Enable for PAGE_OFFSET
Signed-off-by: Thomas Garnier <thgarnie@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
When fadump mode is enabled, the default initrd is rebuilt with kdump
dracut module. As the default initrd is altered, the original default
initrd is backed up. But we are not restoring it when fadump mode is
disabled. This patch tries to restore the backed up default initrd on
disabling fadump mode.
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
When a remote dump target is specified, kdump dracut module prefixes
'kdump-' to network interface name (ifname) as kernel assigned names
are not persistent. In fadump mode, kdump dracut module is added to
the default initrd, which adds the 'kdump-' prefix to the ifname of
the prodcution kernel itself. If fadump mode is disabled after this,
kdump dracut module picks the ifname that is already prefixed with
'kdump-' in the production kernel and adds another 'kdump-' to it,
making the ifname something like kdump-kdump-eth0 for kdump kernel.
Eventually, kdump kernel fails with below traces:
dracut-initqueue[246]: RTNETLINK answers: Network is unreachable
dracut-initqueue[246]: arping: Device kdump-kdump-eth0 not available.
The ip command shows the below:
kdump:/# ip addr show kdump-kdump-eth0
2: kdump-kdump-eth: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 \
qdisc pfifo_fast state UNKNOWN qlen 1000
link/ether 22:82:87:7b:98:02 brd ff:ff:ff:ff:ff:ff
inet6 2002:903:15f:550:2082:87ff:fe7b:9802/64 scope global \
mngtmpaddr dynamic
valid_lft 2591890sec preferred_lft 604690sec
inet6 fe80::2082:87ff:fe7b:9802/64 scope link
valid_lft forever preferred_lft forever
kdump:/#
The trailing 0 from kdump-kdump-eth0 is missing in the ifname, probably
truncated owing to ifname length limit, while setting.
This patch fixes this by avoiding addition of the prefix 'kdump-' when
such prefix is already present in the ifname.
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Kernels of live images are booted with a kernel parameter which looks
like "root=live:CDLABEL=Fedora-WS-Live-25_A-2". This argument can't be
recognized by dracut during kdump process and will cause failure
of kdump if users didn't set KUDMP_COMMANDLINE in /etc/sysconfig/kdump.
So we should filter out 'root' when we find such a parameter in
/proc/cmdline to make kdump work correctly in live images.
Signed-off-by: Tong Li <tonli@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
This is a short document about how to setup kdump on live images. All
steps were tested on Fedora 25 Alpha LiveCD and saved vmcore captured
by kdump to a USB stick successfully.
Signed-off-by: Tong Li <tonli@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
V1 of the KASLR patch which was backported in 2.0.13-6 had wrong
calculation for page_offset. This patch takes the correct difference.
Signed-off-by: Pratyush Anand <panand@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Fix Bug 925630 - kexec-tools: support for arm64
https://bugzilla.redhat.com/show_bug.cgi?id=925630
involves three things:
1. back porting upstream code to enable the function of kexec-tools on arm64
patchset backported from upstream:
commit abdfe97736f89d9bc73662b9134604b0229a599e
commit 522df5f7217fda01ece3f6ac3e9987b0320c2bb0
commit 217bcc00c9309416a6c6cd0584196559d28a9259
2. fix the arm related building issue by using autoreconf in spec file
3. patches to fix the issue of higher version gcc used by koji (not upstrem yet,
and the corresponding fix in kernel side is in other package)
kexec-tools-2.0.13-arm64-Add-support-for-additional-relocations-in-the-kexec-purgatory-code.patch
kexec-tools-2.0.13-arm64-Add-support-of-R_AARCH64_PREL32-relocation-in-.patch
[panand: apply patches in 3 of above paragraph]
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Acked-by: Pratyush Anand <panand@redhat.com>
Since in Fedora 25 kernel kaslr is enabled (x86) but makedumpfile can not save
a correct vmcore, so it means kdump default setup will not work.
Pratyush posted a patch series to upstream which can fix the issue. Let's merge them in F25, will get the normal fixes after it being merged in upstream, we hopefully can rebase soon in rawhide.
This is an urgent fix for F25 since F25 freeze is this week.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Pratyush Anand <panand@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
We get following error on the systems that have everything built-in and no
initrd is used.
Kernel dev name of /dev/root is not found.
Dump target /dev/root is probably not mounted.
It happens because `df $path` gets /dev/root from /proc/self/mountinfo.
Fix this by identifying real target device when `df $path` returns
Filesystem as /dev/root.
Reported-and-tested-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Pratyush Anand <panand@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Since we also check for mount point of $_target after if/else loop, so
there is no need to do the same thing specifically in else loop as well.
Remove those duplicate statement from else loop.
Signed-off-by: Pratyush Anand <panand@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
On a diskless client /etc/fstab does not exist. Therefore check
modification time of this file for rebuild only if it exists.
Also use --fstab option with findmnt only when /etc/fstab exists.
Signed-off-by: Pratyush Anand <panand@redhat.com>
Reviewed-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
commit "28e8c4b5ac89 kdumpctl: Move file modification check logic in
check_system_modified()" copied file modification check logic instead of
moving.
Kill the duplicate logic from original calling function check_rebuild().
Signed-off-by: Pratyush Anand <panand@redhat.com>
Reviewed-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Fedora dracut-network version >= 044-117 must be installed to work with
this set of kexec-tools patches. Therefore adding dependency for them.
Acked-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Kdump explicitly adds "nfs" dracut module in case of nfs dumping,
actually in case of nfs dump, nfs is a mount target, and will be
added into host_fs_types[], thus dracut will add it automatically,
according to 95nfs/module-setup.sh check().
So, we can safely remove all the add_dracut_module "nfs".
Acked-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Update "kexec-kdump-howto" to illustrate the usage of special mount
information via "dracut_args".
Reviewed-by: Pratyush Anand <panand@redhat.com>
Suggested-by: Dave Young <dyoung@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
There are some complaints about nfs kdump that users must mount
nfs beforehand, which may cause some overhead to nfs server.
For example, there're thounsands of diskless clients deployed with
nfs dumping, each time the client is boot up, it will trigger
kdump rebuilding so will mount nfs, thus resulting in thousands
of nfs request concurrently imposed on the same nfs server.
We introduce a new way of specifying mount information via the
already-existent "dracut_args" directive(so avoid adding extra
directives in /etc/kdump.conf), we will skip all the filesystem
mounting and checking stuff for it. So it can be used in the
above-mentioned nfs scenario to avoid severe nfs server overhead.
Specifically, if there is any "--mount" information specified via
"dracut_args" in /etc/kdump.conf, always use it as the final mount
without any validation(mounting or checking like mount options,
fs size, etc), so users are expected to ensure its correctness.
NOTE:
-Only one mount target is allowed using "dracut_args" globally.
-Dracut will create <mountpoint> if it doesn't exist in kdump kernel,
<mountpoint> must be specified as an absolute path.
-Users should do a test first and ensure it works because kdump does
not prepare the mount or check all the validity.
Reviewed-by: Pratyush Anand <panand@redhat.com>
Suggested-by: Dave Young <dyoung@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Fedora dracut version >= 044-75 must be installed to work with this set of
kexec-tools patches. Therefore adding dependency for them.
Signed-off-by: Pratyush Anand <panand@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Now dracut takes care to add module for active watchdog. Therefore we do
not need to pass iTCO_wdt and lpc_ich module in rd.driver.pre specifically
here.
Signed-off-by: Pratyush Anand <panand@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Update howto with notes on dracut and kernel watchdog module handling.
Signed-off-by: Pratyush Anand <panand@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
If state of a watchdog device is changed by an user after kdumpctl restart
then initramfs must be rebuilt on the basis of new watchdog status.
Testing:
-------------------------------------------------------
Initramfs wdt state
Prev Current Result
-------------------------------------------------------
Not Exist NA X Rebuild
Exist Inact Inact No Rebuild
Exist Inact Act Force Rebuild
Exist Act Inact Force Rebuild
Exist Act Act(Same wdt) No Rebuild
Exist Act Act(Diff wdt) Force Rebuild
Exist Act Module Removed Force Rebuild
Signed-off-by: Pratyush Anand <panand@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
If dracut watchdog module is enabled then, it includes kernel watchdog
module of active watchdog device in initramfs.
kdump.conf has an option to modify dracut_args. So, if an user passes "-a
watchdog" in dracut_args then dracut will add kernel watchdog module of
active watchdog device in initramfs.
Since, kexec-tools always requires to add kernel watchdog module of active
watchdog device in initramfs, therefore even when an user does not pass any
watchdog option and there exists at least one active watchdog device then
also kexec-tools adds "-a watchdog" in dracut args.
Therefore, if an user does not want to add kernel watchdog module in
initramfs then the person must pass "-o watchdog" in dracut_args.
Signed-off-by: Pratyush Anand <panand@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Fix the typos and grammar problems in kdump.conf man page.
Reported-by: Donald Berry <dberry@redhat.com>
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
The default action comment about "halt" is wrong, default action means
the action to perform after a vmcore saving failure.
Also there are lots of typos and incorrect expressions.
Fix them here as well.
[dyoung: fixed trailing whitespaces, drop unnecessary comments, change the
alignment.]
Reported-by: Donald Berry <dberry@redhat.com>
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
There are several kinds of iSCSI mode rhel support currently.
- Pure hardware iSCSI
- iBFT iSCSI
- Pure software iSCSI
Except for the 1st one that firmware takes care of everything to
make it behave like a local disk, both iBFT and pure software iSCSI
mode need pass information to kdump kernel for configuring them
correctly.
Currently kdump takes iBFT mode as a software iSCSI and collects
the related information to set up software iSCSI in 2nd kernel,
though dracut can detect and collect information to set up iBFT
iSCSI of 2nd kernel. This brings up 2 problems:
1) Redundent information about the related iSCSI is collected. One
is done by kdump, the other is from dracut.
2) These 2 sessions of 2nd kernel for a certain session of 1st kernel
could contain two "ip=xxx" cmdline option. This will cause cmdline
handling error in dracut.
The 1st one is not critical while the 2nd is. In order to avoid above
2 problems, kdump need detect iBFT mode iSCSI and leave it to dracut.
This is what is done in this patch.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Xunlei Pang <xlpang@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Use our own code to get system total memory from /proc/meminfo because the
callback to pyanaconda sometimes cause installation hangs.
Signed-off-by: Dave Young <dyoung@redhat.com>
