Both functions are almost identical. The only differences are (1) the
sysfs node the status is read from and (2) the fact the fadump version
doesn't verify if the file it's trying to read actually exists. Thus
merge the two functions and get rid of the check_current_status wrapper.
While at it rename the function to is_kernel_loaded which explains
better what the function does.
Finally, after moving FADUMP_REGISTER_SYS_NODE shellcheck can no longer
access the definition and starts complaining about it not being quoted.
Thus quote all uses of FADUMP_REGISTER_SYS_NODE.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
With the deprecation of the 'default' option in kdump.conf
check_failure_action_config needed to track which option was used
(default or failure_action). This made the function quite complex.Thus
make option 'default' a true alias of 'failure_action' when parsing
kdump.conf and simplify check_failure_action_config.
Do the same simplifications for check_final_action_config as both
functions are basically identical.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
Currently when using anaconda to install the OS, the following errors
occur,
INF packaging: Configuring (running scriptlet for): kernel-core-5.14.0-70.el9.x86_64 ...
INF dnf.rpm: grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
...
INF packaging: Configuring (running scriptlet for): kexec-tools-2.0.23-9.el9.x86_64 ...
INF dnf.rpm: grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
Or for s390, the following errors occur,
INF packaging: Configuring (running scriptlet for): kernel-core-5.14.0-71.el9.s390x ...
03:37:51,232 INF dnf.rpm: grep: /etc/zipl.conf: No such file or directory
grep: /etc/zipl.conf: No such file or directory
grep: /etc/zipl.conf: No such file or directory
INF packaging: Configuring (running scriptlet for): kexec-tools-2.0.23-9_1.el9_0.s390x ...
INF dnf.rpm: grep: /etc/zipl.conf: No such file or directory
This is because when anaconda installs the packages, bootloader hasn't
been installed and /boot/grub2/grubenv or /etc/zipl.conf doesn't exist.
So don't try to update crashkernel when bootloader isn't ready to avoid
the above errors.
Note this is the second attempt to fix this issue. Previously a file
/tmp/kexec_tools_package_install was created to avoid running the
related code thus to avoid the above errors but unfortunately that
approach has two issues a) somehow osbuild doesn't delete it for RHEL b)
this file could still exist if users manually remove kexec-tools.
Fixes: e218128 ("Only try to reset crashkernel for osbuild during package install")
Reported-by: Jan Stodola <jstodola@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
With kernel commit 607451ce0aa9b ("powerpc/fadump: register for fadump
as early as possible"), 'kdumpctl start' prematurely returns with the
below message:
"Kdump already running: [WARNING]"
instead of setting default initrd with dump capture capability as
required for fadump. Skip status check in fadump mode to avoid this
problem.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
In case of fadump, default initrd is rebuilt with dump capturing
capability, as the same initrd is used for booting production kernel
as well as capture kernel.
The original initrd file is backed up with a checksum, to restore
it as the default initrd when fadump is disabled. As the checksum
file is not kernel version specific, switching between different
kernel versions and kdump/fadump dump mode breaks the default initrd
backup/restore logic. Fix this by having a kernel version specific
checksum file.
Also, if backing up initrd fails, retaining the checksum file isn't
useful. Remove it.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Currently _find_kernel_path_by_release uses grubby and grep to
find the kernel path, if both the normal kernel and it's debug
varient exist, the grep will give more than one kernel strings.
```
kernel="/boot/vmlinuz-5.14.0-139.kpq0.el9.s390x+debug"
kernel="/boot/vmlinuz-5.14.0-139.kpq0.el9.s390x"
```
This will cause an error when installing debug kernel.
```
The param "/boot/vmlinuz-5.14.0-139.kpq0.el9.s390x+debug
/boot/vmlinuz-5.14.0-139.kpq0.el9.s390x" is incorrect
```
Fixes: 945cbbd ("add helper functions to get kernel path by kernel release and the path of current running kernel")
Signed-off-by: Lichen Liu <lichliu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Currently, kexec-tools tries to reset crashkernel when using anaconda to
install the system. But grubby isn't ready and complains that,
10:34:17,014 INF packaging: Configuring (running scriptlet for): kexec-tools-2.0.23-9.el9.x86_64 1646034766 53ff7158f8808774f4e3c3c87e504aa7a6d677b537754dac86c87925c8f0a397
10:34:17,205 INF dnf.rpm: grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
kexec-tools is supposed to update the kernel crashkernel parameter after
package upgrade. Unfortunately, the posttrans RPM scriptlet doesn't
distinguish between package install and upgrade. This patch skips
reset_crashkernel_after_update as similar to e218128e ("Only try to
reset crashkernel for osbuild during package install").
Reported-by: Jan Stodola <jstodola@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
When the dump target is lvm2 thinp, if we didn't mount
the dump target first, get_fs_type_from_target will get
empty output:
Before mount:
$ get_fs_type_from_target /dev/vg00/thinlv
After mount:
$ mount /dev/vg00/thinlv /mnt
$ get_fs_type_from_target /dev/vg00/thinlv
ext4
As a result, kdumpctl start will fail with:
$ kdumpctl start
kdump: Dump target is invalid
kdump: Starting kdump: [FAILED]
This patch fix the issue by bypassing check_fs_modified
when the dump target is lvm2 thinp.
Signed-off-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Coiby Xu <prudo@redhat.com>
lvm2 relies on /etc/lvm/lvm.conf to determine its behaviour. The
important configs such as thin_pool_autoextend_threshold and
thin_pool_autoextend_percent will be used during kdump in 2nd
kernel. So if the file is modified, the initramfs should be
rebuild to include the latest.
Signed-off-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Currently, updating kexec-tools on s390x gives the warning
sed: can't read /etc/default/grub: No such file or directory
This happens because s390x doesn't use GRUB and /etc/default/grub
doesn't exist. We need to skip both reading and writing to
/etc/default/grub.
Reported-by: Jie Li <jieli@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
memory requirement for LUKS-encrypted target
When there are multiple key slots, "kdumpctl estimate" uses the least
memory-consuming key slot. For example, when there are two memory slots
created with --pbkdf-memory=1048576 (1G) and --pbkdf-memory=524288 (512M),
"kdumpctl estimate" thinks the extra memory requirement is only 512M.
This will of course lead to OOM if the user uses the more
memory-consuming key slot. Fix it by sorting in reverse order.
Fixes: e9e6a2c ("kdumpctl: Add kdumpctl estimate")
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Lichen Liu <lichliu@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2060319
Currently, kexec-tools tries to reset crashkernel when using anaconda to
install the system. But grubby isn't ready and complains that,
10:33:17,631 INF packaging: Configuring (running scriptlet for): kernel-core-5.14.0-70.el9.x86_64 1645746534 03dcd32db234b72440ee6764d59b32347c5f0cd98ac3fb55beb47214a76f33b4
10:34:16,696 INF dnf.rpm: grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
We only need to try resetting crashkernel for osbuild. Skip it for other
cases. To tell if it's package install instead of package upgrade, make
use of %pre to write a file /tmp/kexec-tools-install when "$1 == 1" [1].
[1] https://docs.fedoraproject.org/en-US/packaging-guidelines/Scriptlets/#_syntax
Reported-by: Jan Stodola <jstodola@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Lichen Liu <lichenliu@redhat.com>
This patch add virtiofs support for kexec-tools by introducing a new option
for /etc/kdump.conf:
virtiofs myfs
Where myfs is a variable tag name specified in qemu cmdline
"-device vhost-user-fs-pci,tag=myfs".
The patch covers the following cases:
1) Dumping VM's vmcore to a virtiofs shared directory;
2) When the VM's rootfs is a virtiofs shared directory and dumping the
VM's vmcore to its subdirectory, such as /var/crash;
3) The combination of case 1 & 2: The VM's rootfs is a virtiofs shared
directory and dumping the VM's vmcore to another virtiofs shared
directory.
Case 2 & 3 need dracut >= 057, otherwise VM cannot boot from virtiofs
shared rootfs. But it is not the issue of kexec-tools.
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
Decrease the risk that of leaking information that could potentially
be used to exploit the crash further (think location of keys).
Signed-off-by: Lichen Liu <lichliu@redhat.com>
Acked-by: Coiby Xu <coxu@redhat.com>
"grubby --zipl" only takes effect when setting default kernel. It's
useless to add "--zipl" when updating kernel command line. Also rename
_update_grub to _update_kernel_cmdline since s390x doesn't use GRUB.
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: bz2104534
When running "kdumpctl reset-crashkernel --kernel=ALL" on s390x,
sed: can't read /etc/default/grub: No such file or directory
sed: can't read /etc/default/grub: No such file or directory
This happens because s390x doesn't use the grub bootloader and
/etc/default/grub doesn't exist.
Reported-by: smitterl@redhat.com
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: bz2089871
Currently, kexec-tools can't be updated using virt-customize because
older version of kdumpctl can't acquire instance lock for the
get-default-crashkernel subcommand. The reason is /var/lock is linked to
/run/lock which however doesn't exist in the case of virt-customize.
This patch fixes this problem by using /tmp/kdump.lock as the lock
file if /run/lock doesn't exist.
Note
1. The lock file is now created in /run/lock instead of /var/run/lock since
Fedora has adopted adopted /run [2] since F15.
2. %pre scriptlet now always return success since package update won't
be blocked
[1] https://fedoraproject.org/wiki/Features/var-run-tmpfs
Fixes: 0adb0f4 ("try to reset kernel crashkernel when kexec-tools updates the default crashkernel value")
Reported-by: Nicolas Hicher <nhicher@redhat.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Suggested-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Currently, kdump may experience failure on some aws aarch64 platform.
The final scenario is:
[ 79.145089] printk: console [ttyS0] disabled
Then the system has no response any more. And after reboot, there is no
vmcore generated under /var/crash/. More detail [1].
In a short word, it is caused by the irqpoll policy and some unknown
acpi issue. The serial device is hot-removed as a pci device.
More detailed, the irqpoll policy demands to iterate over all interrupt
handler, if the interrupt line is shared, then the handler is
dispatched. And acpi handler acpi_irq() is on a shared interrupt line,
so it is called. But for some unknown reason, the acpi hardware regs
hold wrong state, and the acpi driver decides that a hot-removed event
happens on a pci slot, which finally removes the pci serial device.
To tackle this issue by removing the irqpoll parameter on aws aarch64
platform, until the real root cause in acpi is found and resolved.
[1]: https://bugzilla.redhat.com/show_bug.cgi?id=2080468#c0
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Coiby Xu <coxu@redhat.com>
There are many variants on OSTree based systems these days so
we should probably refer to the class of systems as "OSTree
based systems". Also, Atomic Host is dead.
Signed-off-by: Dusty Mabe <dusty@dustymabe.com>
Acked-by: Coiby Xu <coxu@redhat.com>
Currently there are two issues with unit-testing the functions defined
in kdumpctl and other shell scripts after sourcing them,
- kdumpctl would call main which requires root permission and would
create single instance lock (/var/lock/kdump)
- kdumpctl and other shell scripts directly source files under /usr/lib/kdump/
When ShellSpec load a script via "Include", it defines the__SOURCED__
variable. By making use of __SOURCED__, we can
1. let kdumpctl not call main when kdumpctl is "Include"d by ShellSpec
2. instruct kdumpctl and kdump-lib.sh to source the files in the repo
when running ShelSpec tests
Note coverage/ is added to .gitignore because ShellSpec generates code
coverage results in this folder.
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Make use of the new ${OPT[]} array and simplify local_fs_dump_target to
remove one more file operations.
While at it rename the local_fs_dump_target to is_local_target
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
With the introduction of ${OPT[fstype]} this call to kdump_get_conf_val
can be removed now as well.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
The variable is only used for ssh dump targets. Furthermore it is
identical to the value stored in ${OPT[_target]}. Thus drop DUMP_TARGET and
use ${OPT[_target]} instead.
In order to be able to distinguish between the different target types
introduce the internal ${OPT[_fstype]}.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
The variable is only used for ssh dump targets. Furthermore it is
identical to the value stored in ${OPT[sshkey]}. Thus drop
SSH_KEY_LOCATION and use ${OPT[sshkey]} instead.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
The variable is only used for ssh dump targets. Furthermore it is
identical to the value stored in ${OPT[path]}. Thus drop SAVE_PATH and
use ${OPT[path]} instead.
Also make sure that ${OPT[path]} is always set to the default value when
no entry in kdump.conf is found.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
Every call to kdump_get_conf_val parses kdump.conf although the file has
already been parsed in check_config. Thus store the values parsed in
check_config in an array and use them later instead of re-parsing the
file over and over again.
While at it rename check_config to parse_config.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
check_config and check_ssh_config both parse /etc/kdump.conf and are
usually used together. The difference between both is that
check_ssh_config does some extra checks on the format of the provided
ssh destination but ignores invalid or deprecated options in the config.
Thus merge check_ssh_config into check_config. Leave the additional
checks on the ssh destination in check_ssh_config but treat it like the
checks done for e.g. the failure_action.
This slightly changes the behavior of 'kdumpctl propagate', which now
fails if kdump.conf contains an invalid value unrelated to ssh. This
change in behavior isn't problematic because 'kdumpctl propagate' always
needs to be followed by a 'kdumpctl start' to have a working kdump
environment. For the situations where 'propagate' fails now the 'start'
would have failed in the past. So the failure only moved one step ahead
in the sequence.
While at it drop check_ssh_target and call check_and_wait_network_ready
directly.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
The function has multiple problems:
1) SSH_{USER,SERVER} aren't defined local
2) Weird use of cut and sed to parse the DUMP_TARGET for the user and
host although check_ssh_config guarantees that it has the format
<user>@<host>.
3) Unnecessary use of a variable for the return value
4) Weird behavior to first unpack the DUMP_TARGET to SSH_USER and
SSH_SERVER and then putting it back together again
5) Definition of variable errmsg that is only used once but breaks
grep-ability of error message.
6) Wrong order when redirecting output of ssh-keygen, see SC2069 [1]
Fix them now.
While at it also improve the error messages in the function.
[1] https://www.shellcheck.net/wiki/SC2069
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
For ssh targets kdumpctl only verifies that the config value has the
correct <user>@<host> format itself. For all other tests, e.g. if the
destination can be reached, it relies on ssh. This allows users to
provide a <host> that isn't the proper hostname but an alias defined in
the ssh_config without failing the tests. If this is done
dracut-module-setup.sh:kdump_get_remote_ip will fail to obtain the
targets ip address. This failure is not detected and thus will not fail
the initramfs creation. The resulting initramfs however doesn't have the
necessary information for setting up the network and thus will fail to
boot.
Prevent the use of alias hostnames by verifying that the given hostname
is the same one ssh would use after parsing the ssh_config.
Note: Don't use getent ahosts to verify that the given host can be
resolved as this requires the network to be up which cannot be
guaranteed when the kdump.conf is parsed.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
The time out was increased to 180 seconds in 680c0d3 ("kdumpctl:
distinguish the failed reason of ssh"). Update the comment to reflect
that change.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
There are currently three identical definitions for the default ssh key.
Combine them into one in kdump-lib-initramfs.sh.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
do_estimate prints the warning that the reserved crashkernel is lower
than the recommended one even then when both values are identical. This
might cause confusion. So omit printing the warning when both values are
equal.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Acked-by: Coiby Xu <coxu@redhat.com>
There is a system-wide sync call at the end of mkdumprd, move it to
kdumpctl after rebuild initrd and add another one for mkfadumprd.
Sync only the $TARGET_INITRD to avoid a system-wide sync taking too
long on a system with high disk activity.
Also update the sync in kdumpctl:restore_default_initrd which will
mv the $DEFAULT_INITRD_BAK to $DEFAULT_INITRD.
Signed-off-by: Lichen Liu <lichliu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
If GRUB_ETC_DEFAULT use crashkernel=auto or
crashkernel=OLD_DEFAULT_CRASHKERNEL, it should be updated as well.
Add a helper function to read kernel cmdline parameter from
GRUB_ETC_DEFAULT. This function is used to read kernel cmdline
parameter like fadump or crashkernel.
Reviewed-by: Philipp Rudo <prudo@redhat.com>
There is the case where there are multiple entries of the same parameter on
the command line, e.g.
GRUB_CMDLINE_LINUX="crashkernel=110M crashkernel=220M fadump=on crashkernel=330M".
In such an situation _update_kernel_cmdline_in_grub_etc_default only
updates/removes the last entry which is usually not what you want as the
kernel (for crashkernel) takes the last entry it can find.
Thus make sure the case with multiple entries of the same parameter is
handled properly by removing all occurrences of given parameter first.
Note
1. sed command group and conditional control has been used to get rid of
grep.
2. Fully supporting kernel cmdline as documented in
Documentation/admin-guide/kernel-parameters.rst is complex and in
foreseeable future a full implementation is not needed. So simply
document the unsupported cases instead.
Fixes: 140da74 ("rewrite reset_crashkernel to support fadump and to used by RPM scriptlet")
Reported-by: Philipp Rudo <prudo@redhat.com>
Suggested-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
It's found that the kernel cmdline crashkernel=auto doesn't get updated
when upgrading kexec-tools. This happens because _get_all_kernels_from_grubby
is called with no argument by reset_crashkernel_after_update. When retrieving
all kernel paths on the system, "grubby --info ALL" should be used. Fix this
error by passing "ALL" argument.
Fixes: 0adb0f4 ("try to reset kernel crashkernel when kexec-tools updates the default crashkernel value")
Reported-by: Jie Li <jieli@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Tao Liu <ltao@redhat.com>
_is_osbuild fails because it expects the 1st and 2nd function parameter
to be the environment variable and environ file path respectively. Fix
it by swapping the parameters in read_proc_environ_var.
Note the osbuild environ file path is defined in _OSBUILD_ENVIRON_PATH
so _is_osbuild can be unit-tested by overwriting _OSBUILD_ENVIRON_PATH.
Fixes: 6a3ce83 ("fix the error of parsing the container environ variable for osbuild")
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Pingfan Liu <piliu@redhat.com>
The environment variable entries in /proc/[pid]/environ are separated by
null bytes instead of by spaces. Update the sed regex to fix this issue.
Note that,
1. this patch also fixes a issue which is kdumpctl would try to reset
crashkernel even osbuild has provided custom crashkernel value.
2. kernel hook 92-crashkernel.install installed by kexec-tools is
guaranteed to be ran by kernel-install. kexec-tools doesn't recommend
kernel so there is no guarantee kernel is installed after kexec-tools.
But dnf invokes kernel-install in the posttrans scriptlet (of kernel-core)
which is always ran after all packages including kexec-tools and kernel
in a dnf transaction.
3. To be able to do unit tests, the logic of reading environment variable
has been extracted as a separate function.
Fixes: ddd428a ("set up kernel crashkernel for osbuild in kernel hook")
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
kdumpctl only accepts a specified set of options. Add
auto_reset_crashkernel to this set.
Fixes: 73ced7f ("introduce the auto_reset_crashkernel option to kdump.conf")
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Tao Liu <ltao@redhat.com>
When a file doesn't exist or isn't readable, grep complains as follows,
grep: /proc/cmdline: No such file or directory
grep: /etc/kernel/cmdline: No such file or directory
/proc/cmdline doesn't exist when installing package for an OS image and
/etc/kernel/cmdline may not exist if osbuild doesn't want set custom
kernel cmdline.
Use "-s" to suppress the error messages.
Fixes: 0adb0f4 ("try to reset kernel crashkernel when kexec-tools updates the default crashkernel value")
Fixes: ddd428a ("set up kernel crashkernel for osbuild in kernel hook")
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Tao Liu <ltao@redhat.com>
osbuild is a tool to build OS images. It uses bwrap to install packages
inside a sandbox/container. Since the kernel package recommends
kexec-tools which in turn recommends grubby, the installation order would
be grubby -> kexec-tools -> kernel. So we can use the kernel hook
92-crashkernel.install provided by kexec-tools to set up kernel
crashkernel for the target OS image. But in osbuild's case, there is no
current running kernel and running `uname -r` in the container/sandbox
actually returns the host kernel release. To set up kernel crashkernel for
the OS image built by osbuild, a different logic is needed.
We will check if kernel hook is running inside the osbuild container
then set up kernel crashkernel only if osbuild hasn't specified a
custome value. osbuild exposes [1] the container=bwrap-osbuild environment
variable. According to [2], the environment variable is not inherited down
the process tree, so we need to check /proc/1/environ to detect this
environment variable to tell if the kernel hook is running inside a
bwrap-osbuild container. After that we need to know if osbuild wants to use
custom crashkernel value. This is done by checking if /etc/kernel/cmdline
has crashkernel set [3]. /etc/kernel/cmdline is written before packages
are installed.
[1] https://github.com/osbuild/osbuild/pull/926
[2] https://systemd.io/CONTAINER_INTERFACE/
[3] https://bugzilla.redhat.com/show_bug.cgi?id=2024976#c5
Reviewed-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
When kexec-tools updates the default crashkernel value, it will try to
reset the existing installed kernels including the currently running
kernel. So the running kernel could have different kernel cmdline
parameters from /proc/cmdline. When installing a kernel after updating
kexec-tools, /usr/lib/kernel/install.d/20-grub.install would be called
by kernel-install [1] which would use /proc/cmdline to set up new kernel's
cmdline. To address this special case, reset the new kernel's crashkernel
and fadump value to the value that would be used by running kernel after
rebooting by the installation hook. One side effect of this commit is it
would reset the installed kernel's crashkernel even currently running kernel
don't use the default crashkernel value after rebooting. But I think this
side effect is a benefit for the user.
The implementation depends on kernel-install which run the scripts in
/usr/lib/kernel/install.d passing the following arguments,
add KERNEL-VERSION $BOOT/MACHINE-ID/KERNEL-VERSION/ KERNEL-IMAGE [INITRD-FILE ...]
An concrete example is given as follows,
add 5.11.12-300.fc34.x86_64 /boot/e986846f63134c7295458cf36300ba5b/5.11.12-300.fc34.x86_64 /lib/modules/5.11.12-300.fc34.x86_64/vmlinuz
kernel-install could be started by the kernel package's RPM scriplet [2].
As mentioned in previous commit "try to reset kernel crashkernel when
kexec-tools updates the default crashkernel value", kdumpctl has difficulty
running in RPM scriptlet fore CoreOS. But rpm-ostree ignores all kernel hooks,
there is no need to disable the kernel hook for CoreOS/Atomic/Silverblue. But a
collaboration between rpm-ostree and kexec-tools is needed [3] to take care
of this special case.
Note the crashkernel.default support is dropped.
[1] https://www.freedesktop.org/software/systemd/man/kernel-install.html
[2] https://src.fedoraproject.org/rpms/kernel/blob/rawhide/f/kernel.spec#_2680
[3] https://github.com/coreos/rpm-ostree/issues/2894
Reviewed-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
kexec-tools could update the default crashkernel value.
When auto_reset_crashkernel=yes, reset kernel to new crashkernel
value in the following two cases,
- crashkernel=auto is found in the kernel cmdline
- the kernel crashkernel was previously set by kexec-tools i.e.
the kernel is using old default crashkernel value
To tell if the user is using a custom value for the kernel crashkernel
or not, we assume the user would never use the default crashkernel value
as custom value. When kexec-tools gets updated,
1. save the default crashkernel value of the older package to
/tmp/crashkernel (for POWER system, /tmp/crashkernel_fadump is saved
as well).
2. If auto_reset_crashkernel=yes, iterate all installed kernels.
For each kernel, compare its crashkernel value with the old
default crashkernel and reset it if yes
The implementation makes use of two RPM scriptlets [2],
- %pre is run before a package is installed so we can use it to save
old default crashkernel value
- %post is run after a package installed so we can use it to try to reset
kernel crashkernel
There are several problems when running kdumpctl in the RPM scripts
for CoreOS/Atomic/Silverblue, for example, the lock can't be acquired by
kdumpctl, "rpm-ostree kargs" can't be run and etc.. So don't enable this
feature for CoreOS/Atomic/Silverblue.
Note latest shellcheck (0.8.0) gives false positives about the
associative array as of this commit. And Fedora's shellcheck is 0.7.2
and can't even correctly parse the shell code because of the associative
array.
[1] https://github.com/koalaman/shellcheck/issues/2399
[2] https://docs.fedoraproject.org/en-US/packaging-guidelines/Scriptlets/
Reviewed-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Rewrite kdumpctl reset-crashkernel KERNEL_PATH as
kdumpctl reset-crashkernel [--fadump=[on|off|nocma]] [--kernel=path_to_kernel] [--reboot]
This interface would reset a specific kernel to the default crashkernel value
given the kernel path. And it also supports grubby's syntax so there are the
following special cases,
- if --kernel not specified,
- use KDUMP_KERNELVER if it's defined in /etc/sysconfig/kdump
- otherwise use current running kernel, i.e. `uname -r`
- if --kernel=DEFAULT, the default boot kernel is chosen
- if --kernel=ALL, all kernels would have its crashkernel reset to the
default value and the /etc/default/grub is updated as well
--fadump=[on|off|nocma] toggles fadump on/off for the kernel provided
in KERNEL_PATH. If --fadump is omitted, the dump mode is determined by
parsing the kernel command line for the kernel(s) to update.
CoreOS/Atomic/Silverblue needs to be treated as a special case because,
- "rpm-ostree kargs" is used to manage kernel command line parameters
so --kernel doesn't make sense and there is no need to find current
running kernel
- "rpm-ostree kargs" itself would prompt the user to reboot the system
after modify the kernel command line parameter
- POWER is not supported so we can assume the dump mode is always kdump
This interface will also be called by kexec-tools RPM scriptlets [1]
to reset crashkernel.
Note the support of crashkenrel.default is dropped.
[1] https://docs.fedoraproject.org/en-US/packaging-guidelines/Scriptlets/
Reviewed-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
grubby --info=kernel-path or --add-kernel=kernel-path accepts a kernel
path (e.g. /boot/vmlinuz-5.14.14-200.fc34.x86_64) instead of kernel release
(e.g 5.14.14-200.fc34.x86_64). So we need to know the kernel path given
a kernel release. Although for Fedora/RHEL, the kernel path is
"/boot/vmlinuz-<KERNEL_RELEASE>", a path kernel could also be
/boot/<machine-id>/<KERNEL_RELEASE>/vmlinuz. So the most reliable way to
find the kernel path given a kernel release is to use "grubby --info".
For osbuild, a kernel path may not yet exist but it's valid for
"grubby --update-kernel=KERNEL_PATH". For example, "grubby -info" may
output something as follows,
index=0
kernel="/var/cache/osbuild-worker/osbuild-store/tmp/tmp2prywdy5object/tree/boot/vmlinuz-5.15.10-100.fc34.x86_64"
args="ro no_timer_check net.ifnames=0 console=tty1 console=ttyS0,115200n8"
root="UUID=76a22bf4-f153-4541-b6c7-0332c0dfaeac"
initrd="/var/cache/osbuild-worker/osbuild-store/tmp/tmp2prywdy5object/tree/boot/initramfs-5.15.10-100.fc34.x86_64.img"
There is no need to check if path like
/var/cache/osbuild-worker/osbuild-store/tmp/tmp2prywdy5object/tree/boot/vmlinuz-5.15.10-100.fc34.x86_64
physically exists.
Note these helper functions doesn't support CoreOS/Atomic/Silverblue
since grubby isn't used by them.
Reviewed-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
