Resolves: bz2076416
Upstream: Fedora
Conflict: None
commit 9dfcacf72d
Author: Coiby Xu <coxu@redhat.com>
Date: Thu Sep 8 17:06:19 2022 +0800
Determine whether IPv4 or IPv6 is needed
According to `man nm-online`,
"By default, connections have the ipv4.may-fail and
ipv6.may-fail properties set to yes; this means that
NetworkManager waits for one of the two address families to
complete configuration before considering the connection
activated. If you need a specific address family configured
before network-online.target is reached, set the corresponding
may-fail property to no."
If a NIC has an IPv4 or IPv6 address, set the corresponding may-fail
property to no. Otherwise, dumping vmcore over IPv6 could fail because
only IPv4 network is ready or vice versa.
Also disable IPv6 if only IPv4 is used and vice versa.
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Thomas Haller <thaller@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: bz2076416
Upstream: Fedora
Conflict: None
commit d25b1ee31c
Author: Coiby Xu <coxu@redhat.com>
Date: Thu Sep 9 11:35:52 2021 +0800
Add functions to copy NetworkManage connection profiles to the initramfs
Each network interface is manged by a NM connection. Given a list of
network interface names, copy the NetworkManager (NM) connection
profiles i.e. .nmconnection files to the kdump initramfs.
Before copying a connection file, clone it to automatically convert a
legacy ifcfg-*[1] file to a .nmconnection file and for the convenience of
editing the connection profile.
[1] https://fedoraproject.org/wiki/Changes/NetworkManager_keyfile_instead_of_ifcfg_rh
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Thomas Haller <thaller@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Related: bz2076416
Upstream: Fedora
Conflict: None
commit b7e58619d1
Author: Coiby Xu <coxu@redhat.com>
Date: Mon Sep 13 22:13:44 2021 +0800
Fix error for vlan over team network interface
6f9235887f ("module-setup.sh: enable
vlan on team interface") skips establishing teaming network by mistake.
Although it could use one of slave netifs to establish connection
to transfer vmcore to remote fs, it breaks the implicit assumption of
creating an identical network topology to the 1st kernel.
Fixes: 6f92358 ("module-setup.sh: enable vlan on team interface")
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Thomas Haller <thaller@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
upstream: fedora
resolves: bz2083475
conflict: none
commit 3ae8cf8876
Author: Tao Liu <ltao@redhat.com>
Date: Thu Nov 10 10:25:58 2022 +0800
Don't check fs modified when dump target is lvm2 thinp
When the dump target is lvm2 thinp, if we didn't mount
the dump target first, get_fs_type_from_target will get
empty output:
Before mount:
$ get_fs_type_from_target /dev/vg00/thinlv
After mount:
$ mount /dev/vg00/thinlv /mnt
$ get_fs_type_from_target /dev/vg00/thinlv
ext4
As a result, kdumpctl start will fail with:
$ kdumpctl start
kdump: Dump target is invalid
kdump: Starting kdump: [FAILED]
This patch fix the issue by bypassing check_fs_modified
when the dump target is lvm2 thinp.
Signed-off-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Coiby Xu <prudo@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
upstream: fedora
resolves: bz2083475
conflict: Yes, use "grep -q <<< $(cmd)" instead of
"cmd | grep -q", because the latter will
fail with strange reason.
commit f11721077a
Author: Tao Liu <ltao@redhat.com>
Date: Sat Oct 8 15:41:41 2022 +0800
Add dependency of dracut lvmthinpool-monitor module
The 80lvmthinpool-monitor module is needed for monitor and
autoextend the size of thin pool in 2nd kernel. The module was
integrated in dracut version 057.
If lvmthinpool-monitor module is not found, we will print a warning.
Because we don't want to block the kdump process when the thin pool
capacity is enough and no monitor-and-autoextend actually needed.
Signed-off-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
resolves: bz2083475
upstream: fedora
conflict: none
commit 10ca970940
Author: Tao Liu <ltao@redhat.com>
Date: Sat Oct 8 15:41:40 2022 +0800
lvm.conf should be check modified if lvm2 thinp enabled
lvm2 relies on /etc/lvm/lvm.conf to determine its behaviour. The
important configs such as thin_pool_autoextend_threshold and
thin_pool_autoextend_percent will be used during kdump in 2nd
kernel. So if the file is modified, the initramfs should be
rebuild to include the latest.
Signed-off-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
resolves: bz2083475
upstream: fedora
conflict: none
commit 0a5b71d123
Author: Tao Liu <ltao@redhat.com>
Date: Sat Oct 8 15:41:39 2022 +0800
Add lvm2 thin provision dump target checker
We need to check if a directory or a device is lvm2 thinp target.
First, we use get_block_dump_target() to convert dump path into
block device, then we check if the device is lvm2 thinp target by
cmd lvs.
is_lvm2_thinp_device is now located in kdump-lib-initramfs.sh, for it
will be used in 2nd kernel. is_lvm2_thinp_dump_target is located in
kdump-lib.sh, for it is only used in 1st kernel, and it has dependencies
which exist in kdump-lib.sh.
Signed-off-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
related: bz2083475
upstream: fedora
conflict: none
commit bea6143178
Author: Tao Liu <ltao@redhat.com>
Date: Sat Oct 8 14:53:21 2022 +0800
Fix the sync issue for dump_fs
Previously the sync for dump_fs is problematic, it always
return success according to man 2 sync. So it cannot detect
the error of the dump target is full and not all of vmcore
data been written back the disk, which will leave the vmcore
imcomplete and report misleading log as "saving vmcore
complete".
In this patch, we will use "sync -f vmcore" instead, which
will return error if syncfs on the dump target fails. In
this way, vmcore sync related failures, such as autoextend
of lvm2 thinpool fails, can be detected and handled properly.
Signed-off-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
Related: bz2076206
Upstream: Fedora
Conflict: None
commit 50a8461fc7
Author: Coiby Xu <coxu@redhat.com>
Date: Mon Sep 5 17:49:18 2022 +0800
Choosing the most memory-consuming key slot when estimating the
memory requirement for LUKS-encrypted target
When there are multiple key slots, "kdumpctl estimate" uses the least
memory-consuming key slot. For example, when there are two memory slots
created with --pbkdf-memory=1048576 (1G) and --pbkdf-memory=524288 (512M),
"kdumpctl estimate" thinks the extra memory requirement is only 512M.
This will of course lead to OOM if the user uses the more
memory-consuming key slot. Fix it by sorting in reverse order.
Fixes: e9e6a2c ("kdumpctl: Add kdumpctl estimate")
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Lichen Liu <lichliu@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: bz2133129
Upstream: Fedora
Conflict: None
commit fdad7d9869
Author: Coiby Xu <coxu@redhat.com>
Date: Thu Sep 29 12:35:00 2022 +0800
Skip reading /etc/defaut/grub for s390x
Currently, updating kexec-tools on s390x gives the warning
sed: can't read /etc/default/grub: No such file or directory
This happens because s390x doesn't use GRUB and /etc/default/grub
doesn't exist. We need to skip both reading and writing to
/etc/default/grub.
Reported-by: Jie Li <jieli@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: bz2060319
Upstream: Fedora
Conflict: None
commit e218128e28
Author: Coiby Xu <coxu@redhat.com>
Date: Thu Sep 8 14:30:02 2022 +0800
Only try to reset crashkernel for osbuild during package install
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2060319
Currently, kexec-tools tries to reset crashkernel when using anaconda to
install the system. But grubby isn't ready and complains that,
10:33:17,631 INF packaging: Configuring (running scriptlet for): kernel-core-5.14.0-70.el9.x86_64 1645746534 03dcd32db234b72440ee6764d59b32347c5f0cd98ac3fb55beb47214a76f33b4
10:34:16,696 INF dnf.rpm: grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
We only need to try resetting crashkernel for osbuild. Skip it for other
cases. To tell if it's package install instead of package upgrade, make
use of %pre to write a file /tmp/kexec-tools-install when "$1 == 1" [1].
[1] https://docs.fedoraproject.org/en-US/packaging-guidelines/Scriptlets/#_syntax
Reported-by: Jan Stodola <jstodola@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Lichen Liu <lichenliu@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Related: bz2048690
Upstream: Fedora
Conflict: None
commit f6bcd819fc
Author: Coiby Xu <coxu@redhat.com>
Date: Fri Jul 15 15:11:44 2022 +0800
use /run/ostree-booted to tell if scriptlet is running on OSTree system
Resolves: bz2092012
According to the ostree team [1], the existence of /run/ostree-booted
> is the most stable way to signal/check that a system has been
> booted in ostree-style. It is also used by rpm-ostree at
> compose/install time in the sandboxed environment where scriptlets run,
> in order to signal that the package is being installed/composed into
> an ostree commit (i.e. not directly on a live system). See
> 8ddf5f40d9/src/libpriv/rpmostree-scripts.cxx (L350-L353)
> for reference.
By checking the existence of /run/ostree-booted, we could skip trying to
update kernel cmdline during OSTree compose time.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=2092012#c3
Reported-by: Luca BRUNO <lucab@redhat.com>
Suggested-by: Luca BRUNO <lucab@redhat.com>
Fixes: 0adb0f4 ("try to reset kernel crashkernel when kexec-tools updates the default crashkernel value")
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Acked-by: Timothée Ravier <siosm@fedoraproject.org>
Signed-off-by: Coiby Xu <coxu@redhat.com>
upstream: fedora
resolves: bz2085347
conflict: yes, small conflict due to patch
"kdumpctl: drop DUMP_TARGET variable" not
backported to rhel9.
commit c743881ae6
Author: Tao Liu <ltao@redhat.com>
Date: Fri Sep 23 18:13:11 2022 +0800
virtiofs support for kexec-tools
This patch add virtiofs support for kexec-tools by introducing a new option
for /etc/kdump.conf:
virtiofs myfs
Where myfs is a variable tag name specified in qemu cmdline
"-device vhost-user-fs-pci,tag=myfs".
The patch covers the following cases:
1) Dumping VM's vmcore to a virtiofs shared directory;
2) When the VM's rootfs is a virtiofs shared directory and dumping the
VM's vmcore to its subdirectory, such as /var/crash;
3) The combination of case 1 & 2: The VM's rootfs is a virtiofs shared
directory and dumping the VM's vmcore to another virtiofs shared
directory.
Case 2 & 3 need dracut >= 057, otherwise VM cannot boot from virtiofs
shared rootfs. But it is not the issue of kexec-tools.
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
Upstream: fedora
Resolves: bz2045949
Resolves: bz2044804
Conflict: none
commit fc1c79ffd2
Author: Tao Liu <ltao@redhat.com>
Date: Sat Oct 8 12:09:08 2022 +0800
Seperate dracut and dracut-squash compressor for zstd
Previously kexec-tools will pass "--compress zstd" to dracut. It
will make dracut to decide whether: a) call mksquashfs to make a
zstd format squash-root.img, b) call cmd zstd to make a initramfs.
Since dracut(>= 057) has decoupled the compressor for dracut and
dracut-squash, So in this patch, we will pass the compressor seperately.
Note:
The is_squash_available && !dracut_has_option --squash-compressor
&& !is_zsdt_command_available case is left unprocessed on purpose.
Actually, the situation when we want to call zstd compression is:
1) If squash function OK, we want dracut to invoke mksquashfs to make
a zstd format squash-root.img within initramfs.
2) If squash function is not OK, and cmd zstd presents, we want dracut
to invoke cmd zstd to make a zstd format initramfs.
is_zstd_command_available check can handle case 2 completely.
However, for the is_squash_available check, it cannot handle case 1
completely. It only checks if the kernel supports squashfs, it doesn't
check whether the squash module has been added by dracut when making
initramfs. In fact, in kexec-tools we are unable to do the check,
there are multiple ways to forbit dracut to load a module, such as
"dracut -o module" and "omit_dracutmodules in dracut.conf".
When squash dracut module is omitted, is_squash_available check will
still pass, so "--compress zstd" will be appended to dracut cmdline,
and it will call cmd zstd to do the compression. However cmd zstd may
not exist, so it fails.
The previous "--compress zstd" is ambiguous, after the intro of
"--squash-compressor", "--squash-compressor" only effect for
mksquashfs and "--compress" only effect for specific cmd.
So for the is_squash_available && !dracut_has_option
--squash-compressor && !is_zsdt_command_available case, we just leave
it to be handled the default way.
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
Resolves: bz2090534
Upstream: Fedora
Conflict: None
commit 4d52b7d548
Author: Lichen Liu <lichliu@redhat.com>
Date: Tue Sep 6 11:15:15 2022 +0800
mkdumprd: Improve error messages on non-existing NFS target directories
When kdump is configured with a NFS location, and the remote directory does
not exist, kdump.service fails with a confusing error message.
kdumpctl[2172]: kdump: Dump path "/tmp/mkdumprd.ftWhOF/target/dumps"
does not exist in dump target "10.111.113.2:/srv/kdump"
We just need to print the remote directory "dumps" in such case, because
"/tmp/mkdumprd.ftWhOF/target" is the local temporary mount point.
Signed-off-by: Lichen Liu <lichliu@redhat.com>
Reviewed-by: Coiby Xu<coxu@redhat.com>
Signed-off-by: Lichen Liu <lichliu@redhat.com>
Resolves: bz2129842
Upstream: Fedora
Conflict: None
commit d905d49c08
Author: Hari Bathini <hbathini@linux.ibm.com>
Date: Fri Sep 16 19:07:24 2022 +0530
fadump: avoid non-debug kernel use for fadump case
Since commit c5bdd2d8f1 ("kdump-lib: use non-debug kernels first"),
non-debug kernel is preferred, over the debug variant, as dump capture
kernel to reduce memory consumption. This works alright for kdump as
the capture kernel is loaded using kexec.
In case of fadump, regular boot loader is used to load the capture
kernel. So, the default kernel needs to be used as capture kernel as
well. But with commit c5bdd2d8f1, initrd of a different kernel is
made dump capture capable, breaking fadump's ability to capture dump
properly. Fix this by sticking with the debug variant in case of
fadump.
Fixes: c5bdd2d8f1 ("kdump-lib: use non-debug kernels first")
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Lichen Liu <lichliu@redhat.com>
Acked-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Lichen Liu <lichliu@redhat.com>
Resolves: bz2089871
Upstream: Fedora
Conflict: None
commit da0ca0d205
Author: Coiby Xu <coxu@redhat.com>
Date: Tue Jun 28 14:38:28 2022 +0800
Allow to update kexec-tools using virt-customize for cloud base image
Resolves: bz2089871
Currently, kexec-tools can't be updated using virt-customize because
older version of kdumpctl can't acquire instance lock for the
get-default-crashkernel subcommand. The reason is /var/lock is linked to
/run/lock which however doesn't exist in the case of virt-customize.
This patch fixes this problem by using /tmp/kdump.lock as the lock
file if /run/lock doesn't exist.
Note
1. The lock file is now created in /run/lock instead of /var/run/lock since
Fedora has adopted adopted /run [2] since F15.
2. %pre scriptlet now always return success since package update won't
be blocked
[1] https://fedoraproject.org/wiki/Features/var-run-tmpfs
Fixes: 0adb0f4 ("try to reset kernel crashkernel when kexec-tools updates the default crashkernel value")
Reported-by: Nicolas Hicher <nhicher@redhat.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Suggested-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: bz2111857
Upstream: Fedora
Conflict: None
commit 4edcd9a400
Author: Lichen Liu <lichliu@redhat.com>
Date: Wed Aug 24 16:16:14 2022 +0800
kdumpctl: make the kdump.log root-readable-only
Decrease the risk that of leaking information that could potentially
be used to exploit the crash further (think location of keys).
Signed-off-by: Lichen Liu <lichliu@redhat.com>
Acked-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Lichen Liu <lichliu@redhat.com>
Resolves: bz2076425
Upstream: Fedora
Conflict: None
commit c5bdd2d8f1
Author: Lichen Liu <lichliu@redhat.com>
Date: Mon Jun 13 12:08:08 2022 +0800
kdump-lib: use non-debug kernels first
Kdump uses currently running kernel as default, but when currently
running kernel is a debug kernel, it will consume more memory,
which may cause out-of-memory and fail to collect vmcore.
Now we will try to use non-debug kernels first if possible.
Also extract the logic of determine KDUMP_KERNEL from
prepare_kdump_bootinfo into a function. This function will return
KDUMP_KERNEL given a kernel version.
Signed-off-by: Lichen Liu <lichliu@redhat.com>
Acked-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Lichen Liu <lichliu@redhat.com>
Resolves: bz2076425
Upstream: Fedora
Conflict: None
commit aa9bb8f8ce
Author: Philipp Rudo <prudo@redhat.com>
Date: Fri Mar 25 15:46:59 2022 +0100
kdump-lib: fix typo in variable name
in prepare_kdump_bootinfo s/defaut/default/.
While at it declare it with the other local variables as local.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Lichen Liu <lichliu@redhat.com>
Resolves: bz2041729
Upstream: Fedora
Conflict: None
commit b92bc6e0a7
Author: Pingfan Liu <piliu@redhat.com>
Date: Mon Jun 13 10:25:26 2022 +0800
crashkernel: optimize arm64 reserved size if PAGE_SIZE=4k
On RHEL9 and Fedora, the arm64 platform only supports 4KB page size.
the reserved memory size can be aligned to that on x86_64.
Introducing a new formula for 4KB on arm64, which bases on x86_64 plus
extra 64MB.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Pingfan Liu <piliu@redhat.com>
upstream: fedora
resolves: bz2096132
conflict: none
commit 2bbc7512a2
Author: Tao Liu <ltao@redhat.com>
Date: Wed Feb 16 14:26:38 2022 +0800
kdump-lib.sh: Check the output of blkid with sed instead of eval
Previously the output of blkid is not checked. If the output
is empty, the eval will report the following error message:
/lib/kdump/kdump-lib.sh: eval: line 925: syntax error near unexpected token `;'
/lib/kdump/kdump-lib.sh: eval: line 925: `; echo $TYPE'
For example, we can observe such a failing when blkid is invoked
against a lvm thinpool block device:
$ blkid -u filesystem,crypto -o export -- "/dev/block/253\:2"
$ echo $?
2
$ udevadm info /dev/block/253\:2|grep S\:
S: mapper/vg00-thinpoll_tmeta
In this patch, we will use sed instead of eval, to output the
fstype of block device if any.
Signed-off-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Tao Liu <ltao@redhat.com>
Resolves: bz2090533
Upstream: Fedora
Conflict: None
commit 218d9917c0
Author: Dusty Mabe <dusty@dustymabe.com>
Date: Mon May 16 14:04:12 2022 -0400
kdump.sysconfig*: add ignition.firstboot to KDUMP_COMMANDLINE_REMOVE
For CoreOS based systems we use Ignition for provisioning machines
in the initramfs on first boot. We trigger Ignition right now by
the presence of `ignition.firstboot` in the kernel command line. The
kernel argument is only present on first boot so after a reboot it
no longer is in the kernel command line.
If a kernel crash happens before the first reboot of a machine we
want the `ignition.firstboot` kernel argument to be removed and not
passed on to the crash kernel.
Signed-off-by: Lichen Liu <lichliu@redhat.com>
Resolves: bz2059492
Upstream: Fedora
Conflict: None
commit 1e7df3e1f3
Author: Coiby Xu <coxu@redhat.com>
Date: Tue Mar 1 17:30:50 2022 +0800
update kexec-kdump-howto
1. yum is deprecated so use dnf instead
2. use the "kdumpctl reset-crashkernel" API
3. ask the users to refer to crashkernel-howto.txt for setting custom
crashkernel value
4. fix a typo
Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: bz2074473
Upstream: Fedora
Conflict: None
commit 4f702c81e9
Author: Coiby Xu <coxu@redhat.com>
Date: Thu May 12 10:48:31 2022 +0800
improve get_recommend_size
This patch rewrites get_recommend_size to get rid of the following
limitations,
1. only supports ranges in crashkernel sorted in increasing order
2. the first entry of crashkernel should have only a single digit and
it's in gigabytes
Suggested-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: bz2074473
Upstream: Fedora
Conflict: None
commit 5c23b6ebb7
Author: Coiby Xu <coxu@redhat.com>
Date: Sat May 7 16:30:39 2022 +0800
fix a calculation error in get_system_size
Recently, it's found 'kdumpctl estimate' returns 512M while the system
reserves 1024M kdump memory in a case. This happens because the ranges
in /proc/iomem are inclusively. For example, "0-1: System RAM" means 2
bytes of system memory other than 1 byte. Fix this error by adding one
more byte.
Note
1. the function has been simplified as well.
2. define PROC_IOMEM as /proc/iomem for the sake of unit tests
Reported-by: Ruowen Qin <ruqin@redhat.com>
Fixes: 1813189 ("kdump-lib.sh: introduce functions to return recommened mem size")
Suggested-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: bz2081323
Upstream: github.com/makedumpfile/makedumpfile.git
Conflicts: None
commit 6d0d95ecc04a70f8448d562ff0fbbae237f5c929
Author: Kazuhito Hagio <k-hagio-ab@nec.com>
Date: Thu Apr 21 08:58:29 2022 +0900
[PATCH] Avoid false-positive mem_section validation with vmlinux
Currently get_mem_section() validates if SYMBOL(mem_section) is the address
of the mem_section array first. But there was a report that the first
validation wrongly returned TRUE with -x vmlinux and SPARSEMEM_EXTREME
(4.15+) on s390x. This leads to crash failing statup with the following
seek error:
crash: seek error: kernel virtual address: 67fffc2800 type: "memory section root table"
Skip the first validation when satisfying the conditions.
Reported-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
Reviewed-and-Tested-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Pingfan Liu <piliu@redhat.com>
Signed-off-by: Philipp Rudo <prudo@redhat.com>
