The wrapper is introduced in commit 002337c, according to the commit
message, the only usage of the wrapper is when dracut-initqueue calls
"systemctl start emergency" directly. In that case, emergency
is started, but not in a isolation mode, which means dracut-initqueue
is still running. On the other hand, emergency will call
"systemctl start dracut-initqueue" again when default action is dump_to_rootfs.
systemd would block on the last dracut-initqueue, waiting for the first
instance to exit, which leaves us hang.
In previous commit we added initqueue status detect in dump_to_rootfs,
so now even without the wrapper, it will not hang.
And actually, previously, with the wrapper, emergency might still hang
for like 30s. When dracut called emergency service because initqueue
timed out, dump_to_rootfs will try start initqueue again and timeout
again. Now with the wrapper removed, we can avoid these two kinds of
hangs, bacause without the isolation we can detect initqueue service
status correctly in such case.
Also remove the invalid header comments in service file, the service
is not part of systemd code. And sync the service spec with dracut.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Coiby Xu <coxu@redhat.com>
This fixes bz1854037 which happens because kexec-tools generates rd.route for
eth0 instead of for kdump-eth0,
1. "rd.route=168.63.129.16:10.0.0.1:eth0 rd.route=169.254.169.254:10.0.0.1:eth0" is passed to the dracut cmdline by kexec-tools
2. In the 2rd kernel, dracut/modules.d/35network-manager/nm-config.sh calls
/usr/libexec/nm-initrd-generator to generate two .nmconnection files
based on the dracut cmdline, i.e. kdump-eth0.nmconnection and eth0.nmconnection,
- /run/NetworkManager/system-connections/kdump-eth0.nmconnection
[connection]
id=kdump-eth0
uuid=3ef53b1b-3908-437e-a15f-cf1f3ea2678b
type=ethernet
autoconnect-retries=1
interface-name=kdump-eth0
multi-connect=1
permissions=
wait-device-timeout=60000
[ethernet]
mac-address-blacklist=
[ipv4]
address1=10.0.0.4/24,10.0.0.1
dhcp-timeout=90
dns=168.63.129.16;
dns-search=
may-fail=false
method=manual
[ipv6]
addr-gen-mode=eui64
dhcp-timeout=90
dns-search=
method=disabled
[proxy]
- /run/NetworkManager/system-connections/eth0.nmconnection
[connection]
id=eth0
uuid=f224dc22-2891-4d7b-8f66-745029df4b53
type=ethernet
autoconnect-retries=1
interface-name=eth0
multi-connect=1
permissions=
[ethernet]
mac-address-blacklist=
[ipv4]
dhcp-timeout=90
dns=168.63.129.16;
dns-search=
method=auto
route1=168.63.129.16/32,10.0.0.1
route2=169.254.169.254/32,10.0.0.1
[ipv6]
addr-gen-mode=eui64
dhcp-timeout=90
dns-search=
method=auto
[proxy]
3. Since there's eth0.nmconnection, NetworkManager will try to get an IP for eth0 regardless of the fact it's a slave NIC and time out
```
$ ip link show
2: kdump-eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 00:0d:3a:11:86:8b brd ff:ff:ff:ff:ff:ff
3: eth0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master kdump-eth0 state UP mode DEFAULT group default qlen 1000
```
Reported-by: Huijing Hei <hhei@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
This reverts commit 5633e83318.
vm.zone_reclaim_mode may cause trashing on some machines. And after
second thought, vm.zone_reclaim_mode is barely helpful for machines
with high mem stress, so just revert it.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
This fix bz1854037 which happens because kexec-tools generates rd.route for
eth0 instead of for kdump-eth0,
1. "rd.route=168.63.129.16:10.0.0.1:eth0 rd.route=169.254.169.254:10.0.0.1:eth0" is passed to the dracut cmdline by kexec-tools
2. In the 2rd kernel,
- dracut/modules.d/40network/net-lib.sh will write /tmp/net.route.eth0 based on rd.route
- dracut/modules.d/45ifcfg/write-ifcfg.sh will copy /tmp/net.route.eth0 to /tmp/icfg and then copytree /tmp/ifcfg to /run/initramfs/state/etc/sysconfig/network-scripts
3. NetworkManager will try to get an IP for eth0 regardless of the fact it's a slave NIC and time out
```
$ ip link show
2: kdump-eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 00:0d:3a:11:86:8b brd ff:ff:ff:ff:ff:ff
3: eth0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master kdump-eth0 state UP mode DEFAULT group default qlen 1000
```
Reported-by: Huijing Hei <hhei@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com
Recently, dracut-network drops depedency on dhcp-client which requires
ipcalc. Thus the dependency chain
"kexec-tools -> dracut-network -> dhcp-client -> ipcalc"
is broken. When NIC is configured to a static IP, kexec-tools depended
on "ipcalc -m" to get netmask. This commit implements the shell
equivalent of "ipcalc -m".
The following test code shows cal_netmask_by_prefix is consistent with
"ipcalc -m",
#!/bin/bash
. dracut-module-setup.sh
for i in {0..128}; do
mask_expected=$(ipcalc -m fe::/$i| cut -d"=" -f2)
mask_actual=$(cal_netmask_by_prefix $i "-6")
if [[ "$mask_expected" != "$mask_actual" ]]; then
echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual
exit
fi
done
echo "IPv6 tests passed"
for i in {0..32}; do
mask_expected=$(ipcalc -m 8.8.8.8/$i| cut -d"=" -f2)
mask_actual=$(cal_netmask_by_prefix $i "")
if [[ "$mask_expected" != "$mask_actual" ]]; then
echo "prefix="$i, "expected="$mask_expected, "acutal="$mask_actual
exit
fi
done
echo "IPv4 tests passed"
i=-2
res=$(cal_netmask_by_prefix "$i" "")
if [[ $? -ne 1 ]]; then
echo "cal_netmask_by_prefix should exit when prefix<0"
exit
fi
res=$(cal_netmask_by_prefix "$i" "")
if [[ $? -ne 1 ]]; then
echo "cal_netmask_by_prefix should exit when prefix<0"
exit
fi
i=33
$(cal_netmask_by_prefix $i "")
if [[ $? -ne 1 ]]; then
echo "cal_netmask_by_prefix should exit when prefix>32 for IPv4"
exit
fi
i=129
$(cal_netmask_by_prefix $i "-6")
if [[ $? -ne 1 ]]; then
echo "cal_netmask_by_prefix should exit when prefix>128 for IPv4"
exit
fi
echo "Bad prefixes tests passed"
echo "All tests passed"
Reported-by: Jie Li <jieli@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
die (in dracut-lib.sh) is supposed to be used in the initramfs environment.
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
On some large systems, /sys/devices is huge and it's not a wise idea to
iterate it. `find` may cause tremendous contention on the kernfs_mutex
when there are already stress on /sys, and it will perform very very
poorly.
Simply check if drm class presents should be good enough.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Also known as CVE-2021-20269. The kdump dmesg log files(kexec-dmesg.log,
vmcore-dmesg.txt) are generated by shell redirection, which take the
default umask value, making the files readable for group and others.
This patch chmod these files, making them only accessible to owner.
Signed-off-by: Tao Liu <ltao@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
In fadump mode, it is also useful to observe kdump message through
console. Hence enable it.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
There is no need to source the file manually, dracut will always
prepare the dracut lib before calling a module-setup.sh
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
systemctl -q --root "$initdir" add-wants X.target X.service is the
recommanded way to add service dependency, and it covers more corner
cases.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
The parameter either6 is introduced to dracut by
commit 67354eebbcd4c358b8194ba5fd1ab1cf7dbd42aa
Author: Pingfan Liu <piliu@redhat.com>
Date: Tue Apr 24 16:41:21 2018 +0800
40network: introduce ip=either6 option
But it turns out needless.
On a sensible ipv6 network environment, DHCPv6 can not work properly alone,
because DHCPv6 protocol has no info about the gateway.
An reasonalbe process of ipv6 address set up should look like
host send: Router Solicitation
router reply: Router Advertisements
"Router Advertisements" carries many info like gateway, and if it has
other-config flag set, it carries DNS info etc. As for DHCPv6 address
allocation, it will only start if "Router Advertisements" has the 'managed'
flag set, which directs the host to start a stateful address allocation
from DHCPv6 server.
For more info:
rfc4861: Neighbor Discovery for IP version 6 (IPv6)
rfc5175: IPv6 Router Advertisement Flags Option
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Dracut has switch network-legacy to network-manager by default, which makes
vlan on team easy. So it can be enabled.
Testing network topology with two VMs.
VM1
ens2-\ /----> VLAN8 (192.168.120.50)
---> team0
ens3-/ (192.168.122.10)
VM2
ens2-\ /----> VLAN8 (192.168.120.100)
---> team0
ens3-/ (192.168.122.20)
Both of ens2/ens3 in VM1/VM2 are connected to virbr0.
During test, dump target is set as root@192.168.120.100:/var/crash
then crashing in VM1
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
Let's add the rd.kdumploglvl option to control log level in the second
kernel, which can make us avoid rebuilding the kdump initramfs after we
change the log level in /etc/sysconfig/kdump.
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
depend() in module-setup.sh is a better place to setup dracut module
dependency, it will do early check, and fail early if needed module is
missing. Also remove a unneeded helper add_dracut_module.
Also remove the unnecessary return in depend() function.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
The dracut module is opportunistic about using the built-in squashfs
support only when available, but the spec file hard requires it. Demote
it to a weak dep to truly make it optional.
This caters to environments which strive to stay minimal, like FCOS and
RHCOS. See https://github.com/coreos/fedora-coreos-config/pull/708 for
details.
Previously journalctl logs are directly dropped to save memory, but this
make journalctl unusable in kdump kernel and diffcult to debug. So
instead just don't let it read kmsg but keep other logs stored as volatile.
Kernel message are already stored in the kernel log ring buffer,
no need to let journalctl make a copy, especially when in kdump
kernel, ususlly there won't be too much kernel log overlapping
the old ring buffer.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
Let's use the logger in the second kernel and collect the kernel ring
buffer(dmesg) of the second kernel.
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
If failure action is set to "shell", user will need more debug info
available in kdump kernel. Especially when serial console is not
available, manually retrieve the log from journalctl is very useful
for debugging kdump issue.
Else, we can still drop journalctl content to save memory assuming
nothing will use it.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
Even if the directory "/etc/kdump/pre.d/" is empty, the following false
alarm can be observed during building kdump.initrd:
"/etc/kdump/pre.d/* is not executable"
Suppress it.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Dracut get_persistent_dev function don't recognize UUID= or LABEL=
format, so caller should conver it to the path to the block device
before calling it. There is already such a helper
"kdump_get_persistent_dev", just move it to kdump-lib.sh and rename
it to reuse it,
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
This patch installs the binary and script files under /etc/kdump/{pre.d,post.d}
into new initramfs of kdump.
Signed-off-by: Shinichi Onitsuka <onitsuka.shinic@fujitsu.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Switch root is never used for kdump image, and this will be helpful to
reduce the initramfs size.
Also increase dracut dependency version and the function is
dracut_no_switch_root is new introduced.
This commit is applied to RHEL some time ago, but missing in Fedora as
Fedora's Dracut didn't backport this feature at that time. Now apply
this missing commit.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
Upstream dracut now use network-manager module by default and since
upstream commit 3dcaa97, network-manager expects user to pass "rd.neednet"
to indicate network is required.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
This reverts commit cee618593c.
Upstream dracut have provided a parameter for adding mandantory network
requirement by appending "rd.neednet" parameter, so we should use that
instead.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
In most cases, it always provides a persistent MAC address. But for
the s390 Arch, sometimes, kernel could run in the LPAR mode and it
doesn't provide a persistent MAC address, which caused the kdump
failure.
Currently, some rules rely on the persistent MAC address, for the
above case, which won't work in kdump kernel because non-persistent
MAC could not match with udev rules.
To fix this issue, need to add a new option 'rd.znet_ifname' in order
to provide extra parameters such as 'ifname' and 'subchannels' for
some rules, which ensures kdump can also work appropriately without
the persistent MAC. Please refer to the following commit in dracut:
872eb69936bd ("95znet: Add a rd.znet_ifname= option")
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
pcs cluster and cluster cib-upgrade may throw some information and disturb
the parsing. Mute them
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
There is a race issue between "pcs" and "kdumpctl restart"
-1. set up cluster
# pcs cluster setup --start mycluster node1 node2
# pcs stonith create kdump fence_kdump pcmk_reboot_action="off"
# pcs stonith level add 1 node1 kdump
# pcs stonith level add 1 node2 kdump
-2. Then here comes the command _immediately_ in kdumpctl
# pcs cluster cib
But due to some pcs internal mechanism, "pcs cluster cib" can not
fetch the updated info in time.
Fix these issue by forcing the upgrade of cib.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
If user configured target is used, path should be used as the absolute
path within the dump target direct, and user should be fully aware of
the path structure within the target device. The adjust_bind_mount_path
call here make it very hard to control the behavior.
Especially, if it's a cross device bind mount, this will likely create a
invalid path in the target. And for atomic case, adjust_bind_mount_path call
here assumes user will always pass root device as the explicitly configured
dump target, which is not true.
If user configured target device is used, the path is always be the
absolute path inside of given target. If user don't know about the path
structure in the target device, then user should either use the path
based config, or carefully exam the target device before using it as a
dump target.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
This commit remove almost all special workaround for atomic, and treat
all bind mounts in any environment equally.
Use a helper get_bind_mount_directory_from_path to get the bind mount
source path of given path.
is_atomic function now only used to determine the right /boot path
for atomic/silverblue environment.
And remove get_mntpoint_from_path(), it's the only function that never
ignore bind mount, and it have no caller after this clean up.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
In /etc/hosts, the alias name can come at the 2nd column, regardless of the
recommendation.
E.g. the following format is valid although not recommended
cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.22.21 fastvm-rhel-7-6-21 fastvm-rhel-7-6-21.localdomain
192.168.22.22 fastvm-rhel-7-6-22 fastvm-rhel-7-6-22.localdomain
192.168.22.21 node1_hb
192.168.22.22 node2_hb
So filtering out both 2nd and 3rd column for matching.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
Process substitution is not POSIX standard syntax, so if bash is configured
to strictly follow POSIC, this will fail.
Just use a POSIX friendly syntax instead.
Fixes: bz1708321
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
This help remove redundant spaces and tailing comment in installed
kdump.conf, currently installed kdump.conf always contain extra empty
lines.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
Latest dracut release stopped creating
$systemdsystemunitdir/initrd.target.wants dir for us, so ensure it
exists before creating the symlink.
Signed-off-by: Kairui Song <kasong@redhat.com>
Tested-and-Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com>
