Commit Graph

155 Commits

Author SHA1 Message Date
Kairui Song
24c6b3027f Merge #4 Make dracut-squash a weak dep 2021-01-10 19:18:23 +00:00
Kairui Song
fa9797ec9d dracut-module-setup.sh: Use systemctl call to replace ln_r
systemctl -q --root "$initdir" add-wants X.target X.service is the
recommanded way to add service dependency, and it covers more corner
cases.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2020-12-15 10:13:08 +08:00
Pingfan Liu
eaf0e813a2 dracut-module-setup.sh: use auto6 for ipv6
The parameter either6 is introduced to dracut by
commit 67354eebbcd4c358b8194ba5fd1ab1cf7dbd42aa
Author: Pingfan Liu <piliu@redhat.com>
Date:   Tue Apr 24 16:41:21 2018 +0800

    40network: introduce ip=either6 option

But it turns out needless.

On a sensible ipv6 network environment, DHCPv6 can not work properly alone,
because DHCPv6 protocol has no info about the gateway.

An reasonalbe process of ipv6 address set up should look like
   host send: Router Solicitation
   router reply: Router Advertisements

"Router Advertisements" carries many info like gateway, and if it has
other-config flag set, it carries DNS info etc.  As for DHCPv6 address
allocation, it will only start if "Router Advertisements" has the 'managed'
flag set, which directs the host to start a stateful address allocation
from DHCPv6 server.

For more info:
rfc4861: Neighbor Discovery for IP version 6 (IPv6)
rfc5175: IPv6 Router Advertisement Flags Option

Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2020-12-07 14:59:57 +08:00
Pingfan Liu
6f9235887f module-setup.sh: enable vlan on team interface
Dracut has switch network-legacy to network-manager by default, which makes
vlan on team easy. So it can be enabled.

Testing network topology with two VMs.
VM1
            ens2-\         /----> VLAN8 (192.168.120.50)
                  ---> team0
            ens3-/     (192.168.122.10)

VM2
            ens2-\         /----> VLAN8 (192.168.120.100)
                  ---> team0
            ens3-/      (192.168.122.20)

Both of ens2/ens3 in VM1/VM2 are connected to virbr0.

During test, dump target is set as root@192.168.120.100:/var/crash
then crashing in VM1

Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-11-30 15:27:00 +08:00
Lianbo Jiang
e345ed18e2 Add the rd.kdumploglvl option to control log level in the second kernel
Let's add the rd.kdumploglvl option to control log level in the second
kernel, which can make us avoid rebuilding the kdump initramfs after we
change the log level in /etc/sysconfig/kdump.

Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2020-11-13 02:43:49 +08:00
Kairui Song
69bf81bc8b Move watchdog detect and install code to module-setup.sh
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-11-12 14:03:40 +08:00
Kairui Song
bc639c9763 Add a helper to omit non-mandatory dracut module
Use dracut_args to omit some non-mandatory modules.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-11-12 14:03:35 +08:00
Kairui Song
08de712528 Move some dracut module dependencies checks to module-setup.sh
depend() in module-setup.sh is a better place to setup dracut module
dependency, it will do early check, and fail early if needed module is
missing. Also remove a unneeded helper add_dracut_module.

Also remove the unnecessary return in depend() function.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-11-12 14:03:19 +08:00
Jonathan Lebon
c9a0df1ccb Make dracut-squash a weak dep
The dracut module is opportunistic about using the built-in squashfs
support only when available, but the spec file hard requires it. Demote
it to a weak dep to truly make it optional.

This caters to environments which strive to stay minimal, like FCOS and
RHCOS. See https://github.com/coreos/fedora-coreos-config/pull/708 for
details.
2020-10-28 16:36:05 -04:00
Kairui Song
46cc7f46b2 module-setup.sh: Instead of drop journalctl log, just don't read kmsg
Previously journalctl logs are directly dropped to save memory, but this
make journalctl unusable in kdump kernel and diffcult to debug. So
instead just don't let it read kmsg but keep other logs stored as volatile.

Kernel message are already stored in the kernel log ring buffer,
no need to let journalctl make a copy, especially when in kdump
kernel, ususlly there won't be too much kernel log overlapping
the old ring buffer.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-10-27 17:34:15 +08:00
Lianbo Jiang
d7054f4cd8 Improve debugging in the kdump kernel
Let's use the logger in the second kernel and collect the kernel ring
buffer(dmesg) of the second kernel.

Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2020-10-27 17:34:07 +08:00
Kairui Song
041ba89902 Don't drop journalctl content if failure action is "shell"
If failure action is set to "shell", user will need more debug info
available in kdump kernel. Especially when serial console is not
available, manually retrieve the log from journalctl is very useful
for debugging kdump issue.

Else, we can still drop journalctl content to save memory assuming
nothing will use it.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-09-17 10:43:07 +08:00
Kairui Song
bcaa4358b1 dracut-module-install: Move systemd conf install code to a function
No feature change.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-09-17 10:43:07 +08:00
Pingfan Liu
bdbddbff73 module-setup.sh: suppress false alarm
Even if the directory "/etc/kdump/pre.d/" is empty, the following false
alarm can be observed during building kdump.initrd:
  "/etc/kdump/pre.d/* is not executable"

Suppress it.

Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2020-07-20 16:17:53 +08:00
Kairui Song
a29de38da5 Always wrap up call to dracut get_persistent_dev function
Dracut get_persistent_dev function don't recognize UUID= or LABEL=
format, so caller should conver it to the path to the block device
before calling it. There is already such a helper
"kdump_get_persistent_dev", just move it to kdump-lib.sh and rename
it to reuse it,

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2020-06-22 19:58:08 +08:00
onitsuka.shinic@fujitsu.com
4246f26725 dracut-module-setup.sh: Install files under /etc/kdump/{pre.d,post.d} into kdump initramfs
This patch installs the binary and script files under /etc/kdump/{pre.d,post.d}
into new initramfs of kdump.

Signed-off-by: Shinichi Onitsuka <onitsuka.shinic@fujitsu.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2020-06-11 12:58:48 +08:00
Kairui Song
e05c550144 Drop switch root capability for non fadump initramfs
Switch root is never used for kdump image, and this will be helpful to
reduce the initramfs size.

Also increase dracut dependency version and the function is
dracut_no_switch_root is new introduced.

This commit is applied to RHEL some time ago, but missing in Fedora as
Fedora's Dracut didn't backport this feature at that time. Now apply
this missing commit.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2020-06-10 22:37:34 +08:00
Kairui Song
0cc3b85d0d module-setup.sh: Add "rd.neednet" parameter if network is needed
Upstream dracut now use network-manager module by default and since
upstream commit 3dcaa97, network-manager expects user to pass "rd.neednet"
to indicate network is required.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2020-05-28 16:26:06 +08:00
Kairui Song
cfd93e2b7e Revert "Add a hook to wait for kdump target in initqueue"
This reverts commit cee618593c.

Upstream dracut have provided a parameter for adding mandantory network
requirement by appending "rd.neednet" parameter, so we should use that
instead.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2020-05-28 16:26:00 +08:00
Lianbo Jiang
ce0305d4f9 Add a new option 'rd.znet_ifname' in order to use it in udev rules
In most cases, it always provides a persistent MAC address. But for
the s390 Arch, sometimes, kernel could run in the LPAR mode and it
doesn't provide a persistent MAC address, which caused the kdump
failure.

Currently, some rules rely on the persistent MAC address, for the
above case, which won't work in kdump kernel because non-persistent
MAC could not match with udev rules.

To fix this issue, need to add a new option 'rd.znet_ifname' in order
to provide extra parameters such as 'ifname' and 'subchannels' for
some rules, which ensures kdump can also work appropriately without
the persistent MAC. Please refer to the following commit in dracut:

872eb69936bd ("95znet: Add a rd.znet_ifname= option")

Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2020-04-27 18:21:22 +08:00
Pingfan Liu
f33f30eb61 dracut-module-setup.sh: fix breakage in get_pcs_fence_kdump_nodes()
pcs cluster and cluster cib-upgrade may throw some information and disturb
the parsing. Mute them

Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2020-04-20 11:24:46 +08:00
Pingfan Liu
6348398743 dracut-module-setup.sh: ensure cluster info is ready before query
There is a race issue between "pcs" and "kdumpctl restart"

-1. set up cluster
 # pcs cluster setup --start mycluster node1 node2
 # pcs stonith create kdump fence_kdump pcmk_reboot_action="off"
 # pcs stonith level add 1 node1 kdump
 # pcs stonith level add 1 node2 kdump

-2. Then here comes the command _immediately_ in kdumpctl
 # pcs cluster cib

But due to some pcs internal mechanism, "pcs cluster cib" can not
fetch the updated info in time.

Fix these issue by forcing the upgrade of cib.

Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2020-04-08 15:46:06 +08:00
Kairui Song
3b09c4910d Remove adjust_bind_mount_path call
If user configured target is used, path should be used as the absolute
path within the dump target direct, and user should be fully aware of
the path structure within the target device. The adjust_bind_mount_path
call here make it very hard to control the behavior.

Especially, if it's a cross device bind mount, this will likely create a
invalid path in the target. And for atomic case, adjust_bind_mount_path call
here assumes user will always pass root device as the explicitly configured
dump target, which is not true.

If user configured target device is used, the path is always be the
absolute path inside of given target. If user don't know about the path
structure in the target device, then user should either use the path
based config, or carefully exam the target device before using it as a
dump target.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-03-30 22:06:46 +08:00
Kairui Song
bde4b7af3b No longer treat atomic/silverblue specially
This commit remove almost all special workaround for atomic, and treat
all bind mounts in any environment equally.

Use a helper get_bind_mount_directory_from_path to get the bind mount
source path of given path.

is_atomic function now only used to determine the right /boot path
for atomic/silverblue environment.

And remove get_mntpoint_from_path(), it's the only function that never
ignore bind mount, and it have no caller after this clean up.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-03-30 22:06:37 +08:00
Pingfan Liu
3be5f74df0 dracut-module-setup.sh: improve get_alias()
In /etc/hosts, the alias name can come at the 2nd column, regardless of the
recommendation.

E.g. the following format is valid although not recommended
cat /etc/hosts
        127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
        ::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
        192.168.22.21	fastvm-rhel-7-6-21	fastvm-rhel-7-6-21.localdomain
        192.168.22.22	fastvm-rhel-7-6-22	fastvm-rhel-7-6-22.localdomain

        192.168.22.21   node1_hb
        192.168.22.22   node2_hb

So filtering out both 2nd and 3rd column for matching.

Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2020-03-24 15:36:26 +08:00
Kairui Song
424ac0bf80 Fix a potential syntax error
Process substitution is not POSIX standard syntax, so if bash is configured
to strictly follow POSIC, this will fail.

Just use a POSIX friendly syntax instead.

Fixes: bz1708321

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-03-23 10:26:20 +08:00
Kairui Song
e78639b46f Use read_strip_comments to filter the installed kdump.conf
This help remove redundant spaces and tailing comment in installed
kdump.conf, currently installed kdump.conf always contain extra empty
lines.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Lianbo Jiang <lijiang@redhat.com>
2020-03-23 10:26:08 +08:00
Kairui Song
c9c50f9a36 dracut-module-setup.sh: Ensure initrd.target.wants dir exists
Latest dracut release stopped creating
$systemdsystemunitdir/initrd.target.wants dir for us, so ensure it
exists before creating the symlink.

Signed-off-by: Kairui Song <kasong@redhat.com>
Tested-and-Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com>
2020-03-18 15:10:59 +08:00
Bhupesh Sharma
a01270b64e kexec-tools/module-setup: Ensure eth devices get IP address for VLAN
Currently while trying to save vmcore via vlan eth interface, the Kdump
kernel fails with network unreachable message.

This is because mkdumprd produces a vlan config that does not get
ip address for vlan on eth device.

Fix the same via this patch.

Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2020-02-13 14:13:59 +08:00
Kairui Song
cee618593c Add a hook to wait for kdump target in initqueue
The dracut initqueue may quit immediately and won't trigger any hook if
there is no "finished" hook still pending (finished hook will be deleted
once it return 0).

This issue start to appear with latest dracut, latest dracut use
network-manager to configure the network,
network-manager module only install "settled" hook, and we didn't
install any other hook. So NFS/SSH dump will fail. iSCSI dump works
because dracut iscsi module will install a "finished" hook to detect if
the iscsi target is up.

So for NFS/SSH we keep initqueue running until the host successfully get
a valid IP address, which means the network is ready.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2020-01-29 08:12:45 +08:00
Kairui Song
24b00298d0 Always install sed and awk
sed and awk is heavily used everywhere in the code, but it's not
explicitely installed by kdump dracut module. If the module in dracut
stop installing them (which already happened with latest dracut
upstream), kdump will break.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2020-01-03 16:35:19 +08:00
Kairui Song
bcdcf35759 Fix potential ssh/nfs kdump failure of missing "ip" command
For ssh/nfs dump, kdump need the 'ip' tool to get the host ip address
for naming the vmcore. But kdump-module-setup.sh never installed this
tool. kdump-module-setup.sh worked so far as dracut network module will
help install it.

After dracut changed to use 35network-manager for network setup, "ip"
command won't be installed in second kernel by default. So need to
ensure "ip" is installed when installing kdump dracut module.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2020-01-03 16:35:15 +08:00
Kairui Song
03111c797b Always use get_save_path to get the 'path' option
This help deduplicate the code. Use a single function instead of
repeat the same logic.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2020-01-03 16:35:07 +08:00
Kairui Song
5633e83318 Always set vm.zone_reclaim_mode = 3 in kdump kernel
By default kernel have vm.zone_reclaim_mode = 0 and large page
allocation might fail as kernel is very conservative on memory
reclaiming. If the page allocation failure is not handled carefully
it could lead to more serious problems.

This issue can be reproduced by change with following steps:

- Fill up page cache use:
  # dd if=/dev/urandom of=/test bs=1M count=1300

- Now the memory is filled with write cache:
  # free -m
                total        used        free      shared  buff/cache   available
  Mem:           1790         184         132           2        1473        1348
  Swap:          2119           7        2112

- Insert a module which simply calls "kmalloc(SZ_1M, GFP_KERNEL)" for
  512 times: (Notice: vmalloc don't have such problem)
  # insmod debug_module.ko

- Got following allocation failure:
  insmod: page allocation failure: order:8, mode:0x40cc0(GFP_KERNEL|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0

- Clean up and repeat again with vm.zone_reclaim_mode = 3, OOM is not
  observed.

In kdump kernel there is usually only one online CPU and limited memory,
so we set vm.zone_reclaim_mode = 3 to let kernel reclaim memory more
aggresively to avoid such issue.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2019-11-13 11:35:46 +08:00
Kairui Song
5e76e53a70 module-setup.sh: Simplify the network setup code
Merge kdump_setup_netdev into kdump_install_net.

kdump_install_net is a wrapper of calling kdump_setup_netdev, and
it do following three extra things:

  1. Sanitize and resolve the hostname
  2. Resolve the route to the destination
  3. Set the default gateway for once

There is currently only one caller of kdump_setup_netdev, the iscsi
network setup code, and it's doing 1 and 2 by itself. And there should
only be one default gateway in kdump enviroment, so applying 3 here is
fine.

And the comment of kdump_install_net is wrong and obsoleted, update the
comment too.

Just merge kdump_setup_netdev into kdump_install_net and always use
kdump_install_net instead.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
2019-10-24 17:00:02 +08:00
Pingfan Liu
882b920c2f module-setup: re-fix 99kdumpbase network dependency
In commit a431a7e354 (module-setup: fix 99kdumpbase network dependency),
the statement for OR operation is still wrong.

The OR condition statement should be:  if a || b

Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2019-10-22 16:09:43 +08:00
Kairui Song
75297d6f20 dracut-module-setup: fix bond ifcfg processing
Bond options in ifcfg is space separated, dracut expected it to be comma
separated, so it have to be parsed and converted during initramfs
building.

The currently parsing and convert pattern is flawed, for example:
" downdelay=0 miimon=100 mode=802.3ad updelay=0 "

is converted to :
":,downdelay=0 miimon=100 mode=802.3ad updelay=0 "

should be:
":downdelay=0,miimon=100,mode=802.3ad,updelay=0"

So fix this issue by using more simple but robust method for processing
the options.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2019-09-02 17:05:43 +08:00
Pingfan Liu
a5ea190af2 dracut-module-setup: filter out localhost for generic_fence_kdump
The localhost is filtered out in case of is_pcs_fence_kdump, do it too in
case of is_generic_fence_kdump.

Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2019-08-28 14:19:17 +08:00
Pingfan Liu
f0b5493b2e dracut-module-setup: get localhost alias by manual
'hostname -A' can not get the alias, meanwhile 'hostname -a' is deprecated.
So we should do it by ourselves.

The parsing is based on the format of /etc/hosts, i.e.
  IP_address canonical_hostname [aliases...]

Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2019-08-28 14:19:01 +08:00
Kairui Song
4a0f9763c0 Don't forward and drop journalctl logs for fadump
fadump will alter the normal boot initramfs and we don't want a normal
boot to foward and drop the journalctl logs.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2019-08-06 11:14:15 +08:00
Pingfan Liu
88bbab963f dracut-module-setup.sh: skip alias of localhost in get_pcs_fence_kdump_nodes()
The current code only exclude the hostname, while localhost can have alias in
/etc/hosts. All of the alias should be excluded from the fence dump node to
avoid deadlock issue.

Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Kairui Song <kasong@redhat.com>
2019-08-01 13:38:53 +08:00
Kairui Song
cf5d362dca dracut-module-setup.sh: Don't use squash module for fadump
Squash module is used to save memory. For fadump this is not neccessary
and may slow down the build time, and make it more fragile.

fadump initramfs is used for normal boot as well, although squash module
is capable of being used for generic normal boot, but there are cases
where is doesn't work well. So disable it and make fadump more robust.

Signed-off-by: Kairui Song <kasong@redhat.com>
Tested-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
2019-07-16 16:46:23 +08:00
Kairui Song
5b26c1f8b2 Forward logs in kdump kernel to console directly
Don't use any log storage and forward to console directly, this make
console output more useful, and also save more memory. On a fresh
installed Fedora 30 it saved ~5M of memory, and the amount of log being
printed to console is still accetable.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2019-07-16 14:11:16 +08:00
Kairui Song
75d9132417 Get rid of duplicated strip_comments when reading config
When reading kdump configs, a single parsing should be enough and this
saves a lot of duplicated striping call which speed up the total load
speed.

Speed up about 2 second when building and 0.1 second for reload in my
tests.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2019-05-20 16:56:28 +08:00
Kairui Song
4a44eee472 dracut-module-setup: Don't build squashed image if required modules are missing
When someone is using a minimal kernel without squash module installed,
including squash dracut module will either either fail to build or fail to
boot the initramfs.

As kdump always build the image for one single kernel, we can safely just
use modprobe to check if a modules is already built in, or it exists and
loadable for the kernel we are using for kdump image, and don't include
the squash module if they are missing. Everything will still work just
fine without squash module.

We do the check in kdump dracut modules not in squash dracut module
because kdump dracut module could leverage of the KDUMP_KERNELVER variable
to know which kernel it should check against, squash dracut module may be
used to build for a generic image.

And we only check for the kernel module dependency, other binary
dependencies are either well checked or well declared in dracut.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
2018-12-26 10:28:12 +08:00
Kairui Song
a0dc92f46c dracut-module-setup: Fix routing failure on multipath route
Currently we still don't support multipath route, when parsing multipath
route kdumpctl will wrongly consider 'nexthop' as the destination address,
and raise errors in second kernel.

When multipath route is in use, ip route output should be like this:
$ /sbin/ip route show
default via 192.168.122.1 dev ens1 proto dhcp metric 100
192.168.122.0/24 dev ens1 proto kernel scope link src 192.168.122.161 metric 100
192.168.122.8
	nexthop via 192.168.122.1 dev ens1 weight 50
	nexthop via 192.168.122.2 dev ens1 weight 5

As we don't care about HA/performance, simply use the rule with highest
weight and ignore the rest.

Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
2018-11-27 18:12:52 +08:00
Kairui Song
9b6e312447 Enable dracut squash module
In dracut-049, a new squash module is introduced, it can reduce the
memory usage of kdump initramfs in the capture kernel, this helps a lot
on lowering the risk of OOM failure.

Tested with latest rawhide with NFS, SSH and local dump.

Signed-off-by: Kairui Song <kasong@redhat.com>
2018-10-15 15:01:31 +08:00
Kairui Song
f6770b30c3 dracut-module-setup: Fix DRM module inclusion test for hyper-v
We test if to include the drm module or not by testing if there are any
drm entry in sysfs. But there is an exception for hyper-v, DRM module
take care of hyperv's framebuffer driver as well but hyperv_fb will
not create any drm entry. So currently we got black screen on
hyperv guest.

Fix by detect hyperv's special entry as well.

Signed-off-by: Kairui Song <kasong@redhat.com>
2018-08-07 17:22:05 +08:00
Kairui Song
4eedcae5e1 dracut-module-setup.sh: don't include multipath-hostonly
This commit basically reverts commit c755499fad,
and make use of new introduced tri-state hostonly mode.

Following dracut commits merged multipath-hostonly into multipath
module, and introduced a tri-state hostonly mode.

    commit 35e86ac117acbfd699f371f163cdda9db0ebc047
    Author: Kairui Song <kasong@redhat.com>
    Date:   Thu Jul 5 16:20:04 2018 +0800

        Merge 90-multipath-hostonly and 90-multipath

    commit a695250ec7db21359689e50733c6581a8d211215
    Author: Kairui Song <kasong@redhat.com>
    Date:   Wed Jul 4 17:21:37 2018 +0800

        Introduce tri-state hostonly mode

multipath-hostonly module was introduced only for kdump, because kdump
need a more strict hostonly policy for multipath device to save memory.

Now multipath module will provide the behave we wanted by setting
hostonly mode to strict.
2018-07-26 19:25:09 +08:00
Pingfan Liu
6832be14f2 dracut-module-setup.sh: pass ip=either6 param for ipv6
Kdump always use _proto=dhcp for both ipv4 and ipv6.  But for ipv6
the dhcp address assignment is not like ipv4, there are different ways
for it, stateless and stateful, see below document:
https://fedoraproject.org/wiki/IPv6Guide

In case stateless, kernel can do the address assignment, dracut use
_proto=auto6;  for stateful case, dracut use _proto=dhcp6.
But it is hard to decide whether stateless or stateful takes effect,
hence, dracut introduces ip=either6 option, which can try both of these
method automatically for us. For detail, refer to dracut:
commit 67354ee 40network: introduce ip=either6 option

We do not see bug reports before because for the most auto6 cases
kernel assign ip address before dhclient, kdump just happened to work.

Signed-off-by: Pingfan Liu <piliu@redhat.com>
2018-07-09 12:43:28 +08:00